diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts')
-rw-r--r-- | arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts | 519 |
1 files changed, 519 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts new file mode 100644 index 0000000000..f516e0426b --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts @@ -0,0 +1,519 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Tab 4 10.1"; + compatible = "samsung,matisse-wifi", "qcom,apq8026"; + chassis-type = "tablet"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + display0 = &framebuffer0; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <1280>; + height = <800>; + stride = <(1280 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 110 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-backlight { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&backlight_i2c_default_state>; + pinctrl-names = "default"; + + i2c-gpio,delay-us = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x3f>; + + pwms = <&backlight_pwm 0 100000>; + pwm-names = "lp8556"; + + rom-a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0x44>; + }; + + rom-a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x6c>; + }; + + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x24>; + }; + }; + }; + + backlight_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + clocks = <&mmcc CAMSS_GP0_CLK>; + pinctrl-0 = <&backlight_pwm_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default_state>; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en1_default_state>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp_region: adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default_state>; + + st,drdy-int-pin = <1>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default_state>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&tlmm>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_int_rst_default_state>; + + reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_i2c_default_state: backlight-i2c-default-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_pwm_default_state: backlight-pwm-default-state { + pins = "gpio33"; + function = "gp0_clk"; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; |