diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-apq8064.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 203 |
1 files changed, 3 insertions, 200 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 099a16c34e..3faf57035d 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -284,23 +284,6 @@ }; }; - - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Charger temperature */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -655,133 +638,16 @@ clock-names = "core"; }; - ssbi@c00000 { + ssbi2: ssbi@c00000 { compatible = "qcom,ssbi"; reg = <0x00c00000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8821: pmic { - compatible = "qcom,pm8821"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <76 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8821_mpps: mpps@50 { - compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; - reg = <0x50>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8821_mpps 0 0 4>; - }; - }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <74 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8921_gpio: gpio@150 { - - compatible = "qcom,pm8921-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8921_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8921_mpps: mpps@50 { - compatible = "qcom,pm8921-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8921_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 1>; - reg = <0x11d>; - allow-set-time; - }; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - xoadc: xoadc@197 { - compatible = "qcom,pm8921-adc"; - reg = <0x197>; - interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - batt_therm: adc-channel@8 { - reg = <0x00 0x08>; - }; - batt_id: adc-channel@9 { - reg = <0x00 0x09>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - chg_temp: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - }; }; qfprom: qfprom@700000 { @@ -891,60 +757,6 @@ clocks = <&pxo_board>, <&cxo_board>; clock-names = "pxo", "cxo"; }; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - - pm8921_s1: s1 {}; - pm8921_s2: s2 {}; - pm8921_s3: s3 {}; - pm8921_s4: s4 {}; - pm8921_s7: s7 {}; - pm8921_s8: s8 {}; - - pm8921_l1: l1 {}; - pm8921_l2: l2 {}; - pm8921_l3: l3 {}; - pm8921_l4: l4 {}; - pm8921_l5: l5 {}; - pm8921_l6: l6 {}; - pm8921_l7: l7 {}; - pm8921_l8: l8 {}; - pm8921_l9: l9 {}; - pm8921_l10: l10 {}; - pm8921_l11: l11 {}; - pm8921_l12: l12 {}; - pm8921_l14: l14 {}; - pm8921_l15: l15 {}; - pm8921_l16: l16 {}; - pm8921_l17: l17 {}; - pm8921_l18: l18 {}; - pm8921_l21: l21 {}; - pm8921_l22: l22 {}; - pm8921_l23: l23 {}; - pm8921_l24: l24 {}; - pm8921_l25: l25 {}; - pm8921_l26: l26 {}; - pm8921_l27: l27 {}; - pm8921_l28: l28 {}; - pm8921_l29: l29 {}; - - pm8921_lvs1: lvs1 {}; - pm8921_lvs2: lvs2 {}; - pm8921_lvs3: lvs3 {}; - pm8921_lvs4: lvs4 {}; - pm8921_lvs5: lvs5 {}; - pm8921_lvs6: lvs6 {}; - pm8921_lvs7: lvs7 {}; - - pm8921_usb_switch: usb-switch {}; - - pm8921_hdmi_switch: hdmi-switch { - bias-pull-down; - }; - - pm8921_ncp: ncp {}; - }; }; usb1: usb@12500000 { @@ -1472,7 +1284,7 @@ qcom,ncb = <3>; }; - pcie: pci@1b500000 { + pcie: pcie@1b500000 { compatible = "qcom,pcie-apq8064"; reg = <0x1b500000 0x1000>, <0x1b502000 0x80>, @@ -1623,10 +1435,6 @@ memory-region = <&wcnss_mem>; - vddcx-supply = <&pm8921_s3>; - vddmx-supply = <&pm8921_l24>; - vddpx-supply = <&pm8921_s4>; - status = "disabled"; iris { @@ -1634,11 +1442,6 @@ clocks = <&cxo_board>; clock-names = "xo"; - - vddxo-supply = <&pm8921_l4>; - vddrfa-supply = <&pm8921_s2>; - vddpa-supply = <&pm8921_l10>; - vdddig-supply = <&pm8921_lvs2>; }; smd-edge { |