diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom')
46 files changed, 2366 insertions, 958 deletions
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 3dfb1c8cef..9cc1e14e6c 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ + qcom-msm8226-microsoft-dempsey.dtb \ + qcom-msm8226-microsoft-makepeace.dtb \ + qcom-msm8226-microsoft-moneypenny.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \ qcom-msm8916-samsung-e7.dtb \ qcom-msm8916-samsung-grandmax.dtb \ qcom-msm8916-samsung-serranove.dtb \ + qcom-msm8926-htc-memul.dtb \ + qcom-msm8926-microsoft-superman-lte.dtb \ + qcom-msm8926-microsoft-tesla.dtb \ + qcom-msm8926-motorola-peregrine.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi new file mode 100644 index 0000000000..22f3c7bac5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8018.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for Qualcomm PM8018 + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +&ssbi { + pm8018: pmic { + compatible = "qcom,pm8018", "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8018-pwrkey", + "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>, + <&pm8018 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8018_mpps: mpps@50 { + compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8018_mpps 0 0 6>; + }; + + rtc@11d { + compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8018_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8018_gpio 0 0 6>; + #gpio-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi new file mode 100644 index 0000000000..984b797779 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8058.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8058: pmic { + compatible = "qcom,pm8058"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>, + <&pm8058 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8058_led48: led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + status = "disabled"; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8058_led131: led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + status = "disabled"; + }; + + pm8058_led132: led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + status = "disabled"; + }; + + pm8058_led133: led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + status = "disabled"; + }; + + pm8058_keypad: keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>, + <&pm8058 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; + #gpio-cells = <2>; + }; + + pm8058_xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + + rtc@1e8 { + compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; + interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ + <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi index 2413778f37..2fd4f135ed 100644 --- a/arch/arm/boot/dts/qcom/pm8226.dtsi +++ b/arch/arm/boot/dts/qcom/pm8226.dtsi @@ -82,6 +82,8 @@ "usb-valid", "dc-valid"; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi new file mode 100644 index 0000000000..064e3ba54e --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8821.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This PMIC is used on a secondary SSBI bus */ +&ssbi2 { + pm8821: pmic { + compatible = "qcom,pm8821"; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi new file mode 100644 index 0000000000..058962af30 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8921.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8921: pmic { + compatible = "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>, + <&pm8921 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8921_mpps: mpps@50 { + compatible = "qcom,pm8921-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8921_keypad: keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>, + <&pm8921 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + status = "disabled"; + }; + + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; + #gpio-cells = <2>; + + }; + + pm8921_xoadc: xoadc@197 { + compatible = "qcom,pm8921-adc"; + reg = <0x197>; + interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + batt_therm: adc-channel@8 { + reg = <0x00 0x08>; + }; + + batt_id: adc-channel@9 { + reg = <0x00 0x09>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + chg_temp: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */ + <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi index ed0ba591c7..aca0052a02 100644 --- a/arch/arm/boot/dts/qcom/pm8941.dtsi +++ b/arch/arm/boot/dts/qcom/pm8941.dtsi @@ -99,6 +99,8 @@ usb-otg-in-supply = <&pm8941_5vs1>; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts index a39f5a161b..a2ca456012 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts @@ -253,6 +253,8 @@ qcom,fast-charge-high-threshold-voltage = <4400000>; qcom,auto-recharge-threshold-voltage = <4300000>; qcom,minimum-input-voltage = <4400000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts index 59b218042d..ac228965a4 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts @@ -335,6 +335,8 @@ qcom,fast-charge-current-limit = <300000>; qcom,fast-charge-safe-current = <600000>; qcom,auto-recharge-threshold-voltage = <4240000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts index feb78afef3..0a1fd5eb3c 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts @@ -292,6 +292,8 @@ qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts index 94351c9bf9..009afd8212 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts @@ -5,6 +5,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm APQ8060 Dragonboard"; @@ -272,6 +273,10 @@ }; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_gpio { dragon_ethernet_gpios: ethernet-state { pinconf { @@ -447,6 +452,8 @@ * that means */ regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + vdd_l0-supply = <&pm8901_s4>; vdd_l1-supply = <&vph>; vdd_l2-supply = <&vph>; @@ -464,57 +471,63 @@ lvs3_in-supply = <&pm8058_s2>; mvs_in-supply = <&pm8058_s3>; - l0 { + pm8901_l0: l0 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l1 { + + pm8901_l1: l1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l2 { + + pm8901_l2: l2 { /* TMA340 requires strictly 3.3V */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l3 { + + pm8901_l3: l3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + + pm8901_l4: l4 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l5 { + + pm8901_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l6 { + + pm8901_l6: l6 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; bias-pull-down; }; /* s0 and s1 are SAW regulators controlled over SPM */ - s2 { + pm8901_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8901_s3: s3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s4 { + pm8901_s4: s4 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; qcom,switch-mode-frequency = <1600000>; @@ -522,17 +535,22 @@ }; /* LVS0 thru 3 and mvs are just switches */ - lvs0 { + pm8901_lvs0: lvs0 { regulator-always-on; }; - lvs1 { }; - lvs2 { }; - lvs3 { }; - mvs { }; + pm8901_lvs1: lvs1 { }; + + pm8901_lvs2: lvs2 { }; + + pm8901_lvs3: lvs3 { }; + + pm8901_mvs: mvs { }; }; regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; + vdd_l0_l1_lvs-supply = <&pm8058_s3>; vdd_l2_l11_l12-supply = <&vph>; vdd_l3_l4_l5-supply = <&vph>; @@ -554,144 +572,169 @@ vdd_s4-supply = <&vph>; vdd_ncp-supply = <&vph>; - l0 { + pm8058_l0: l0 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l1 { + + pm8058_l1: l1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l2 { + + pm8058_l2: l2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l3 { + + pm8058_l3: l3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l4 { + + pm8058_l4: l4 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l5 { + + pm8058_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l6 { + + pm8058_l6: l6 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3600000>; bias-pull-down; }; - l7 { + + pm8058_l7: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l8 { + + pm8058_l8: l8 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <3050000>; bias-pull-down; }; - l9 { + + pm8058_l9: l9 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l10 { + + pm8058_l10: l10 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l11 { + + pm8058_l11: l11 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; bias-pull-down; }; - l12 { + + pm8058_l12: l12 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l13 { + + pm8058_l13: l13 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; bias-pull-down; }; - l14 { + + pm8058_l14: l14 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - l15 { + + pm8058_l15: l15 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l16 { + + pm8058_l16: l16 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; regulator-always-on; }; - l17 { + + pm8058_l17: l17 { // 1.5V according to schematic regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l18 { + + pm8058_l18: l18 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; bias-pull-down; }; - l19 { + + pm8058_l19: l19 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; bias-pull-down; }; - l20 { + + pm8058_l20: l20 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l21 { + + pm8058_l21: l21 { // 1.1 V according to schematic regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; regulator-always-on; }; - l22 { + + pm8058_l22: l22 { // 1.2 V according to schematic regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l23 { + + pm8058_l23: l23 { // Unused regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l24 { + + pm8058_l24: l24 { // Unused regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l25 { + + pm8058_l25: l25 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - s0 { + pm8058_s0: s0 { // regulator-min-microvolt = <500000>; // regulator-max-microvolt = <1325000>; regulator-min-microvolt = <1100000>; @@ -699,7 +742,8 @@ qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s1 { + + pm8058_s1: s1 { // regulator-min-microvolt = <500000>; // regulator-max-microvolt = <1250000>; regulator-min-microvolt = <1100000>; @@ -707,21 +751,24 @@ qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s2 { + + pm8058_s2: s2 { // 1.3 V according to schematic regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + + pm8058_s3: s3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; regulator-always-on; bias-pull-down; }; - s4 { + + pm8058_s4: s4 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; @@ -730,14 +777,15 @@ }; /* LVS0 and LVS1 are just switches */ - lvs0 { + pm8058_lvs0: lvs0 { bias-pull-down; }; - lvs1 { + + pm8058_lvs1: lvs1 { bias-pull-down; }; - ncp { + pm8058_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; @@ -949,23 +997,27 @@ xoadc-ref-supply = <&pm8058_l18>; /* Board-specific channels */ - mpp5@5 { + adc-channel@5 { /* Connected to AOUT of ALS sensor */ reg = <0x00 0x05>; }; - mpp6@6 { + + adc-channel@6 { /* Connected to test point TP43 */ reg = <0x00 0x06>; }; - mpp7@7 { + + adc-channel@7 { /* Connected to battery thermistor */ reg = <0x00 0x07>; }; - mpp8@8 { + + adc-channel@8 { /* Connected to battery ID detector */ reg = <0x00 0x08>; }; - mpp9@9 { + + adc-channel@9 { /* Connected to XO thermistor */ reg = <0x00 0x09>; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts index c0dd6399f5..d460743fbb 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -1,8 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Asus Nexus7(flo)"; compatible = "asus,nexus7-flo", "qcom,apq8064"; @@ -180,24 +184,26 @@ status = "okay"; }; -/* eMMC */ -&sdcc1 { - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - status = "okay"; -}; - &mdp_dsi1_out { remote-endpoint = <&dsi0_in>; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; vdd_l25-supply = <&pm8921_s1>; vin_lvs2-supply = <&pm8921_s1>; @@ -209,7 +215,7 @@ vdd_ncp-supply = <&pm8921_l6>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -218,7 +224,7 @@ }; /* msm otg HSUSB_VDDCX */ - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; @@ -231,55 +237,58 @@ * tabla2x-slim-CDC_VDD_CP * tabla2x-slim-VDDIO_CDC */ - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; regulator-always-on; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; /* mipi_dsi.1-dsi1_pll_vdda */ - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; /* msm_otg-HSUSB_1p8 */ - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; /* msm_sdcc.1-sdc_vdd */ - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-always-on; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; }; + pm8921_l8: l8 { + }; + /* mipi_dsi.1-dsi1_avdd */ - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; @@ -287,14 +296,14 @@ }; /* pwm_power for backlight */ - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; /* camera, qdsp6 */ - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; @@ -304,37 +313,44 @@ * tabla2x-slim-CDC_VDDA_A_1P2V * tabla2x-slim-VDDD_CDC_D */ - l25 { + pm8921_l25: l25 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; /* * mipi_dsi.1-dsi1_vddio * pil_riva-pll_vdd */ - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; }; }; +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + &usb_hs1_phy { v3p3-supply = <&pm8921_l3>; v1p8-supply = <&pm8921_l4>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts index d6ecfd8add..671d58cc27 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts @@ -1,8 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "CompuLab CM-QS600"; compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; @@ -69,6 +72,14 @@ status = "okay"; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { wlan_default_gpios: wlan-gpios-state { pinconf { @@ -82,6 +93,8 @@ &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs2-supply = <&pm8921_s1>; vin_lvs4_5_7-supply = <&pm8921_s4>; @@ -93,9 +106,8 @@ vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; - /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -103,52 +115,51 @@ bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts index b0c5e7bd5e..ed86b24119 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -1,9 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; @@ -170,6 +173,14 @@ perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { wlan_default_gpios: wlan-gpios-state { pinconf { @@ -192,6 +203,8 @@ &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs2-supply = <&pm8921_s1>; vin_lvs4_5_7-supply = <&pm8921_s4>; @@ -203,9 +216,8 @@ vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; - /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -213,59 +225,63 @@ bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs6 { + pm8921_hdmi_switch: hdmi-switch { bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts index 9244512b74..2412aa3e3e 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Sony Xperia Z"; compatible = "sony,xperia-yuga", "qcom,apq8064"; @@ -65,6 +68,14 @@ status = "okay"; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio3", "gpio4", "gpio29", "gpio35"; @@ -82,11 +93,25 @@ &riva { pinctrl-names = "default"; pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + status = "okay"; + + iris { + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; }; &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; vin_lvs_1_3_6-supply = <&pm8921_s4>; vin_lvs_4_5_7-supply = <&pm8921_s4>; @@ -98,7 +123,7 @@ vin_l28-supply = <&pm8921_s7>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -106,21 +131,21 @@ bias-pull-down; }; - s2 { + pm8921_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; bias-pull-down; }; - s4 { + pm8921_s4: s4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -129,205 +154,207 @@ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - s8 { + pm8921_s8: s8 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; }; /* PMOS LDO */ - l1 { + pm8921_l1: l1 { regulator-always-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; bias-pull-down; }; - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l7 { + pm8921_l7: l7 { regulator-min-microvolt = <1850000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l8 { + pm8921_l8: l8 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l9 { + pm8921_l9: l9 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l10 { + pm8921_l10: l10 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l12 { + pm8921_l12: l12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l14 { + pm8921_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l15 { + pm8921_l15: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l16 { + pm8921_l16: l16 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; - l18 { + pm8921_l18: l18 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l21 { + pm8921_l21: l21 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l22 { + pm8921_l22: l22 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l24 { + pm8921_l24: l24 { regulator-min-microvolt = <750000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l25 { + pm8921_l25: l25 { regulator-always-on; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - l27 { + pm8921_l27: l27 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - l28 { + pm8921_l28: l28 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l29 { + pm8921_l29: l29 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; /* Low Voltage Switch */ - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs2 { + pm8921_lvs2: lvs2 { bias-pull-down; }; - lvs3 { + pm8921_lvs3: lvs3 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; - usb-switch {}; + pm8921_usb_switch: usb-switch {}; - hdmi-switch {}; + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; - ncp { + pm8921_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 099a16c34e..3faf57035d 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -284,23 +284,6 @@ }; }; - - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Charger temperature */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -655,133 +638,16 @@ clock-names = "core"; }; - ssbi@c00000 { + ssbi2: ssbi@c00000 { compatible = "qcom,ssbi"; reg = <0x00c00000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8821: pmic { - compatible = "qcom,pm8821"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <76 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8821_mpps: mpps@50 { - compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; - reg = <0x50>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8821_mpps 0 0 4>; - }; - }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <74 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8921_gpio: gpio@150 { - - compatible = "qcom,pm8921-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8921_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8921_mpps: mpps@50 { - compatible = "qcom,pm8921-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8921_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 1>; - reg = <0x11d>; - allow-set-time; - }; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - xoadc: xoadc@197 { - compatible = "qcom,pm8921-adc"; - reg = <0x197>; - interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - batt_therm: adc-channel@8 { - reg = <0x00 0x08>; - }; - batt_id: adc-channel@9 { - reg = <0x00 0x09>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - chg_temp: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - }; }; qfprom: qfprom@700000 { @@ -891,60 +757,6 @@ clocks = <&pxo_board>, <&cxo_board>; clock-names = "pxo", "cxo"; }; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - - pm8921_s1: s1 {}; - pm8921_s2: s2 {}; - pm8921_s3: s3 {}; - pm8921_s4: s4 {}; - pm8921_s7: s7 {}; - pm8921_s8: s8 {}; - - pm8921_l1: l1 {}; - pm8921_l2: l2 {}; - pm8921_l3: l3 {}; - pm8921_l4: l4 {}; - pm8921_l5: l5 {}; - pm8921_l6: l6 {}; - pm8921_l7: l7 {}; - pm8921_l8: l8 {}; - pm8921_l9: l9 {}; - pm8921_l10: l10 {}; - pm8921_l11: l11 {}; - pm8921_l12: l12 {}; - pm8921_l14: l14 {}; - pm8921_l15: l15 {}; - pm8921_l16: l16 {}; - pm8921_l17: l17 {}; - pm8921_l18: l18 {}; - pm8921_l21: l21 {}; - pm8921_l22: l22 {}; - pm8921_l23: l23 {}; - pm8921_l24: l24 {}; - pm8921_l25: l25 {}; - pm8921_l26: l26 {}; - pm8921_l27: l27 {}; - pm8921_l28: l28 {}; - pm8921_l29: l29 {}; - - pm8921_lvs1: lvs1 {}; - pm8921_lvs2: lvs2 {}; - pm8921_lvs3: lvs3 {}; - pm8921_lvs4: lvs4 {}; - pm8921_lvs5: lvs5 {}; - pm8921_lvs6: lvs6 {}; - pm8921_lvs7: lvs7 {}; - - pm8921_usb_switch: usb-switch {}; - - pm8921_hdmi_switch: hdmi-switch { - bias-pull-down; - }; - - pm8921_ncp: ncp {}; - }; }; usb1: usb@12500000 { @@ -1472,7 +1284,7 @@ qcom,ncb = <3>; }; - pcie: pci@1b500000 { + pcie: pcie@1b500000 { compatible = "qcom,pcie-apq8064"; reg = <0x1b500000 0x1000>, <0x1b502000 0x80>, @@ -1623,10 +1435,6 @@ memory-region = <&wcnss_mem>; - vddcx-supply = <&pm8921_s3>; - vddmx-supply = <&pm8921_l24>; - vddpx-supply = <&pm8921_s4>; - status = "disabled"; iris { @@ -1634,11 +1442,6 @@ clocks = <&cxo_board>; clock-names = "xo"; - - vddxo-supply = <&pm8921_l4>; - vddrfa-supply = <&pm8921_s2>; - vddpa-supply = <&pm8921_l10>; - vdddig-supply = <&pm8921_lvs2>; }; smd-edge { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts index 950fa652f9..6fce011236 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts @@ -49,6 +49,33 @@ no-map; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_uart2 { @@ -403,6 +430,10 @@ pinctrl-1 = <&sdc2_off>; }; +&smbb { + status = "okay"; +}; + &tlmm { sdc1_on: sdc1-on-state { clk-pins { diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi index 468ebc40d2..374af6dd36 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi @@ -98,7 +98,7 @@ }; }; - pci@40000000 { + pcie@40000000 { status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 9844e0b7cf..f989bd741c 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -224,7 +224,7 @@ }; sdhci: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -417,7 +417,7 @@ reg = <0x4ab000 0x4>; }; - pcie0: pci@40000000 { + pcie0: pcie@40000000 { compatible = "qcom,pcie-ipq4019"; reg = <0x40000000 0xf1d>, <0x40000f20 0xa8>, diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index 6198f42f6a..6a7f4dd0f7 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -366,7 +366,7 @@ }; }; - qcom,ssbi@500000 { + ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; @@ -1076,7 +1076,7 @@ status = "disabled"; }; - pcie0: pci@1b500000 { + pcie0: pcie@1b500000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b500000 0x1000 0x1b502000 0x80 @@ -1127,7 +1127,7 @@ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; }; - pcie1: pci@1b700000 { + pcie1: pcie@1b700000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b700000 0x1000 0x1b702000 0x80 @@ -1178,7 +1178,7 @@ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; }; - pcie2: pci@1b900000 { + pcie2: pcie@1b900000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b900000 0x1000 0x1b902000 0x80 diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts index b269fdca14..e3b4b93c3d 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts @@ -6,11 +6,11 @@ * Author : Neil Armstrong <narmstrong@baylibre.com> */ +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "qcom-mdm9615-wp8548.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> / { model = "MangOH Green with WP8548 Module"; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi index dac3aa793f..0dd52cac0e 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi @@ -7,6 +7,7 @@ */ #include "qcom-mdm9615.dtsi" +#include "pm8018.dtsi" / { model = "Sierra Wireless WP8548 Module"; @@ -76,6 +77,10 @@ }; }; +&pm8018 { + interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; +}; + &pm8018_gpio { usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4"; @@ -129,6 +134,142 @@ pinctrl-names = "default"; }; +&rpm { + regulators { + compatible = "qcom,rpm-pm8018-regulators"; + + vin_lvs1-supply = <&pm8018_s3>; + + vdd_l7-supply = <&pm8018_s4>; + vdd_l8-supply = <&pm8018_s3>; + vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; + + /* Buck SMPS */ + pm8018_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s2: s2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s3: s3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s4: s4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s5: s5 { + regulator-always-on; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8018_l2: l2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l3: l3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l4: l4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8018_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8018_l8: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8018_l9: l9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8018_l10: l10 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l11: l11 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l13: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8018_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8018_lvs1: lvs1 { + bias-pull-down; + }; + }; +}; + &sdcc1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index c0a60bae70..34c60994d0 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -256,57 +256,10 @@ }; }; - qcom,ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8018: pmic { - compatible = "qcom,pm8018", "qcom,pm8921"; - interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pwrkey@1c { - compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8018>; - interrupts = <50 IRQ_TYPE_EDGE_RISING>, - <51 IRQ_TYPE_EDGE_RISING>; - debounce = <15625>; - pull-up; - }; - - pm8018_mpps: mpps@50 { - compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8018_mpps 0 0 6>; - }; - - rtc@11d { - compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; - interrupt-parent = <&pm8018>; - interrupts = <39 IRQ_TYPE_EDGE_RISING>; - reg = <0x11d>; - allow-set-time; - }; - - pm8018_gpio: gpio@150 { - compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8018_gpio 0 0 6>; - #gpio-cells = <2>; - }; - }; }; sdcc1bam: dma-controller@12182000 { @@ -383,140 +336,6 @@ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8018-regulators"; - - vin_lvs1-supply = <&pm8018_s3>; - - vdd_l7-supply = <&pm8018_s4>; - vdd_l8-supply = <&pm8018_s3>; - vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; - - /* Buck SMPS */ - pm8018_s1: s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s2: s2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s3: s3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s4: s4 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2200000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s5: s5 { - regulator-always-on; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - /* PMOS LDO */ - pm8018_l2: l2 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8018_l3: l3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8018_l4: l4 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - pm8018_l5: l5 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8018_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8018_l7: l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8018_l8: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8018_l9: l9 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - pm8018_l10: l10 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l11: l11 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l12: l12 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l13: l13 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8018_l14: l14 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - pm8018_lvs1: lvs1 { - bias-pull-down; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi new file mode 100644 index 0000000000..525d8c608b --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for Microsoft MSM8x26-based Lumias + * + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" +#include <dt-bindings/input/input.h> + +/* + * Delete all generic (msm8226.dtsi) reserved + * memory mappings which are different on these devices. + */ +/delete-node/ &smem_region; + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* microSD */ + display0 = &framebuffer; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x3200000 0x800000>; + format = "a8r8g8b8"; + width = <720>; + height = <1280>; + stride = <(720 * 4)>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + /* + * This device being a WP platform has a different + * memory layout than other Android based devices. + * This smem memory region is directly copied from + * the original UEFI firmware. + */ + reserved-memory { + display_reserved: framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + /* These values were taken from the original firmware DSDT */ + pm8226_s1: s1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8226_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2075000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts new file mode 100644 index 0000000000..2c664b5934 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640"; + compatible = "microsoft,dempsey", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts new file mode 100644 index 0000000000..731c5c3756 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640 XL"; + compatible = "microsoft,makepeace", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts new file mode 100644 index 0000000000..992b7115b5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Nokia Lumia 630"; + compatible = "microsoft,moneypenny", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <480>; + height = <854>; + stride = <(480 * 4)>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 5cd03ea7b0..b492c95e5d 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -875,8 +875,8 @@ offset = <0x65c>; mode-bootloader = <0x77665500>; - mode-normal = <0x77665501>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-recovery = <0x77665502>; }; }; @@ -1006,6 +1006,46 @@ "ref"; }; }; + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-305.18", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-19000000 { + opp-hz = /bits/ 64 <19000000>; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts index be18f1be29..69fe651f56 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts @@ -2,6 +2,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm MSM8660 SURF"; @@ -35,30 +36,42 @@ }; &pm8058 { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_FN_F1) - MATRIX_KEY(0, 1, KEY_UP) - MATRIX_KEY(0, 2, KEY_LEFT) - MATRIX_KEY(0, 3, KEY_VOLUMEUP) - MATRIX_KEY(1, 0, KEY_FN_F2) - MATRIX_KEY(1, 1, KEY_RIGHT) - MATRIX_KEY(1, 2, KEY_DOWN) - MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) - MATRIX_KEY(2, 3, KEY_ENTER) - MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) - MATRIX_KEY(4, 1, KEY_UP) - MATRIX_KEY(4, 2, KEY_LEFT) - MATRIX_KEY(4, 3, KEY_HOME) - MATRIX_KEY(4, 4, KEY_FN_F3) - MATRIX_KEY(5, 0, KEY_CAMERA) - MATRIX_KEY(5, 1, KEY_RIGHT) - MATRIX_KEY(5, 2, KEY_DOWN) - MATRIX_KEY(5, 3, KEY_BACK) - MATRIX_KEY(5, 4, KEY_MENU) - >; - keypad,num-rows = <6>; - keypad,num-columns = <5>; + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8058_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; +}; + +&rpm { + regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 9217ced108..a7c245b9c8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -73,22 +73,6 @@ }; }; - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ - <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ - <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ - <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -334,143 +318,10 @@ status = "disabled"; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8058: pmic { - compatible = "qcom,pm8058"; - interrupt-parent = <&tlmm>; - interrupts = <88 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8058_gpio: gpio@150 { - compatible = "qcom,pm8058-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8058_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8058_mpps: mpps@50 { - compatible = "qcom,pm8058-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8058_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwrkey@1c { - compatible = "qcom,pm8058-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8058>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - pm8058_keypad: keypad@148 { - compatible = "qcom,pm8058-keypad"; - reg = <0x148>; - interrupt-parent = <&pm8058>; - interrupts = <74 1>, <75 1>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - pm8058_xoadc: xoadc@197 { - compatible = "qcom,pm8058-adc"; - reg = <0x197>; - interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - ichg: adc-channel@3 { - reg = <0x00 0x03>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - ref_325mv: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - - rtc@1e8 { - compatible = "qcom,pm8058-rtc"; - reg = <0x1e8>; - interrupt-parent = <&pm8058>; - interrupts = <39 1>; - allow-set-time; - }; - - vibrator@4a { - compatible = "qcom,pm8058-vib"; - reg = <0x4a>; - }; - - pm8058_led48: led@48 { - compatible = "qcom,pm8058-keypad-led"; - reg = <0x48>; - status = "disabled"; - }; - - pm8058_led131: led@131 { - compatible = "qcom,pm8058-led"; - reg = <0x131>; - status = "disabled"; - }; - - pm8058_led132: led@132 { - compatible = "qcom,pm8058-led"; - reg = <0x132>; - status = "disabled"; - }; - - pm8058_led133: led@133 { - compatible = "qcom,pm8058-led"; - reg = <0x133>; - status = "disabled"; - }; - - }; }; l2cc: clock-controller@2082000 { @@ -496,72 +347,6 @@ clocks = <&pxo_board>; clock-names = "pxo"; }; - - regulators-0 { - compatible = "qcom,rpm-pm8901-regulators"; - - pm8901_l0: l0 {}; - pm8901_l1: l1 {}; - pm8901_l2: l2 {}; - pm8901_l3: l3 {}; - pm8901_l4: l4 {}; - pm8901_l5: l5 {}; - pm8901_l6: l6 {}; - - /* S0 and S1 Handled as SAW regulators by SPM */ - pm8901_s2: s2 {}; - pm8901_s3: s3 {}; - pm8901_s4: s4 {}; - - pm8901_lvs0: lvs0 {}; - pm8901_lvs1: lvs1 {}; - pm8901_lvs2: lvs2 {}; - pm8901_lvs3: lvs3 {}; - - pm8901_mvs: mvs {}; - }; - - regulators-1 { - compatible = "qcom,rpm-pm8058-regulators"; - - pm8058_l0: l0 {}; - pm8058_l1: l1 {}; - pm8058_l2: l2 {}; - pm8058_l3: l3 {}; - pm8058_l4: l4 {}; - pm8058_l5: l5 {}; - pm8058_l6: l6 {}; - pm8058_l7: l7 {}; - pm8058_l8: l8 {}; - pm8058_l9: l9 {}; - pm8058_l10: l10 {}; - pm8058_l11: l11 {}; - pm8058_l12: l12 {}; - pm8058_l13: l13 {}; - pm8058_l14: l14 {}; - pm8058_l15: l15 {}; - pm8058_l16: l16 {}; - pm8058_l17: l17 {}; - pm8058_l18: l18 {}; - pm8058_l19: l19 {}; - pm8058_l20: l20 {}; - pm8058_l21: l21 {}; - pm8058_l22: l22 {}; - pm8058_l23: l23 {}; - pm8058_l24: l24 {}; - pm8058_l25: l25 {}; - - pm8058_s0: s0 {}; - pm8058_s1: s1 {}; - pm8058_s2: s2 {}; - pm8058_s3: s3 {}; - pm8058_s4: s4 {}; - - pm8058_lvs0: lvs0 {}; - pm8058_lvs1: lvs1 {}; - - pm8058_ncp: ncp {}; - }; }; amba { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts new file mode 100644 index 0000000000..ed328b2433 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "HTC One Mini 2"; + compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + unknown@5b00000 { + reg = <0x05b00000 0x200000>; + no-map; + }; + + unknown@7500000 { + reg = <0x07500000 0xb00000>; + no-map; + }; + + mpss_region: mpss@8000000 { + reg = <0x08000000 0x4f00000>; + no-map; + }; + + unknown@cf00000 { + reg = <0x0cf00000 0x200000>; + no-map; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x3a000>; + no-map; + }; + + unknown@d13a000 { + reg = <0x0d13a000 0xc6000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x650000>; + no-map; + }; + + unknown@d850000 { + reg = <0x0d850000 0x3b0000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1400000>; + no-map; + }; + + unknown@f000000 { + reg = <0x0f000000 0x500000>; + no-map; + }; + + venus_region: venus@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + unknown@fb00000 { + reg = <0x0fb00000 0x1b00000>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/msm8926/memul/adsp.mbn"; + status = "okay"; +}; + +&blsp1_i2c2 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_l28>; + }; + + accelerometer@18 { + compatible = "bosch,bma250e"; + reg = <0x18>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_l28>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + /* TFA9887 @ 34 */ + /* TFA9887 @ 35 */ +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + /* NCP6924 Camera Regulators @ 10 */ + /* PN544 NFC @ 28 */ + /* TPS61310 Flash/Torch @ 33 */ +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1750000>; + qcom,fast-charge-current-limit = <1750000>; + qcom,fast-charge-safe-voltage = <4360000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts new file mode 100644 index 0000000000..9b48661d69 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c3 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 735"; + compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts new file mode 100644 index 0000000000..53a6d4e859 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c1 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 830"; + compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c1 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; + +&gpio_keys { + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + }; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts new file mode 100644 index 0000000000..0cbe2d2fbb --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G 4G (2013)"; + compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + /* Pull-up for I2C lines */ + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts index 6c1bc38188..36f4c997b0 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts @@ -2,6 +2,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" / { model = "Qualcomm MSM8960 CDP"; @@ -88,17 +89,21 @@ }; }; -&pmicintc { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_VOLUMEUP) - MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) - MATRIX_KEY(0, 3, KEY_CAMERA) - >; - keypad,num-rows = <1>; - keypad,num-columns = <5>; - }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + + status = "okay"; }; &rpm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts index 13e85c2874..1a5116336f 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/input/input.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> #include "qcom-msm8960.dtsi" -#include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include "pm8921.dtsi" / { model = "Samsung Galaxy Express SGH-I437"; @@ -84,6 +85,10 @@ }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { compatible = "qcom,rpm-pm8921-regulators"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index d13080fcbe..f420740e06 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -200,10 +200,6 @@ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - }; }; acc0: clock-controller@2088000 { @@ -259,49 +255,10 @@ }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&msmgpio>; - interrupts = <104 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 IRQ_TYPE_EDGE_RISING>, - <51 IRQ_TYPE_EDGE_RISING>; - debounce = <15625>; - pull-up; - }; - - keypad@148 { - compatible = "qcom,pm8921-keypad"; - reg = <0x148>; - interrupt-parent = <&pmicintc>; - interrupts = <74 IRQ_TYPE_EDGE_RISING>, - <75 IRQ_TYPE_EDGE_RISING>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 IRQ_TYPE_EDGE_RISING>; - reg = <0x11d>; - allow-set-time; - }; - }; }; rng@1a500000 { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index da99f770d4..4aaae8537a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -60,6 +60,33 @@ enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; }; + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -340,6 +367,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -347,6 +375,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi index 23ae474698..d34659ebac 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi @@ -65,6 +65,33 @@ pmsg-size = <0x80000>; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -190,6 +217,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -197,6 +225,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { @@ -425,6 +454,8 @@ qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index f41cc4b4b5..083ab780ab 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -346,6 +346,20 @@ reg = <0xf9011000 0x1000>; }; + saw_l2: power-controller@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -405,52 +419,46 @@ }; }; - saw0: power-controller@f9089000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; - }; - - saw1: power-controller@f9099000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; - }; - - saw2: power-controller@f90a9000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw3: power-controller@f90b9000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw_l2: power-controller@f9012000 { - compatible = "qcom,saw2"; - reg = <0xf9012000 0x1000>; - regulator; - }; - acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -1063,6 +1071,15 @@ }; }; + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; @@ -1101,22 +1118,13 @@ }; }; - bimc: interconnect@fc380000 { - reg = <0xfc380000 0x6a000>; - compatible = "qcom,msm8974-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - snoc: interconnect@fc460000 { reg = <0xfc460000 0x4000>; compatible = "qcom,msm8974-snoc"; #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; + <&rpmcc RPM_SMD_SNOC_A_CLK>; }; pnoc: interconnect@fc468000 { @@ -1125,7 +1133,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; + <&rpmcc RPM_SMD_PNOC_A_CLK>; }; ocmemnoc: interconnect@fc470000 { @@ -1134,7 +1142,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; }; mmssnoc: interconnect@fc478000 { @@ -1143,7 +1151,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&mmcc MMSS_S0_AXI_CLK>, - <&mmcc MMSS_S0_AXI_CLK>; + <&mmcc MMSS_S0_AXI_CLK>; }; cnoc: interconnect@fc480000 { @@ -1152,7 +1160,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; + <&rpmcc RPM_SMD_CNOC_A_CLK>; }; tsens: thermal-sensor@fc4a9000 { @@ -1633,13 +1641,6 @@ bias-pull-up; drive-strength = <2>; }; - - cd-pins { - pins = "gpio54"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; blsp1_uart2_default: blsp1-uart2-default-state { @@ -2408,31 +2409,4 @@ <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; - - vreg_boost: vreg-boost { - compatible = "regulator-fixed"; - - regulator-name = "vreg-boost"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - regulator-always-on; - regulator-boot-on; - - gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&boost_bypass_n_pin>; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts index 6c4153689b..fe227fd3f9 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts @@ -57,6 +57,33 @@ enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; vcc-supply = <&pm8941_l18>; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -381,6 +408,8 @@ qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts index c0ca264d81..4c8edadea0 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts @@ -51,6 +51,33 @@ debounce-interval = <150>; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c1 { @@ -433,6 +460,10 @@ status = "okay"; }; +&smbb { + status = "okay"; +}; + &tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio68"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts index 325feb89b3..b93539e2b8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts @@ -155,7 +155,15 @@ enable-active-high; }; - /delete-node/ vreg-boost; + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -355,7 +363,6 @@ vddr-supply = <&vreg_panel>; reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 0798cce3db..ee94741a26 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -84,6 +84,33 @@ pinctrl-0 = <&lcd_dcdc_en_pin_a>; }; + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -297,6 +324,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -304,6 +332,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { @@ -558,6 +587,8 @@ qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index fb6764b2dc..27429d0fed 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -228,31 +228,26 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx55-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; - - usb_ssphy: phy@ff6200 { - reg = <0x00ff6200 0x170>, - <0x00ff6400 0x200>, - <0x00ff6800 0x800>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + status = "disabled"; }; mc_virt: interconnect@1100000 { @@ -603,7 +598,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index 27b7f50a18..40591a4da6 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -204,8 +204,16 @@ gcc: clock-controller@100000 { compatible = "qcom,gcc-sdx65"; reg = <0x00100000 0x001f7400>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_phy>, + <0>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_pipe_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; @@ -233,32 +241,27 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c8>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x2000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_EN>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; status = "disabled"; - usb_ssphy: phy@ff6200 { - reg = <0x00ff6e00 0x160>, - <0x00ff7000 0x1ec>, - <0x00ff6200 0x1e00>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; }; system_noc: interconnect@1620000 { @@ -520,7 +523,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; |