diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts')
-rw-r--r-- | arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts | 350 |
1 files changed, 350 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts new file mode 100644 index 0000000000..33ac4bd1e6 --- /dev/null +++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1H Qseven board development + * platform with camera daughter board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; + +#include <dt-bindings/media/video-interfaces.h> + +#include "r8a7742-iwg21d-q7.dts" + +/ { + model = "iWave Systems RZ/G1H Qseven development platform with camera add-on"; + compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; + + aliases { + serial0 = &scif0; + serial1 = &scif1; + serial3 = &scifb1; + serial5 = &hscif0; + ethernet1 = ðer; + }; + + mclk_cam1: mclk-cam1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam2: mclk-cam2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam3: mclk-cam3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + mclk_cam4: mclk-cam4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + reg_1p8v: 1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p8v: 2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; +}; + +&avb { + /* Pins shared with VIN0, keep status disabled */ + status = "disabled"; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1560", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + micrel,led-mode = <1>; + }; +}; + +&gpio0 { + /* Disable hogging GP0_18 to output LOW */ + /delete-node/ qspi-en-hog; + + /* Hog GP0_18 to output HIGH to enable VIN2 */ + vin2-en-hog { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "VIN2_EN"; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + /* status set to "okay" when needed by camera configuration below */ + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + /* status set to "okay" when needed by camera configuration below */ + clock-frequency = <400000>; +}; + +&pfc { + can0_pins: can0 { + groups = "can0_data_d"; + function = "can0"; + }; + + ether_pins: ether { + groups = "eth_mdio", "eth_rmii"; + function = "eth"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1_c"; + function = "i2c1"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif1_pins: scif1 { + groups = "scif1_data"; + function = "scif1"; + }; + + scifb1_pins: scifb1 { + groups = "scifb1_data"; + function = "scifb1"; + }; + + vin0_8bit_pins: vin0 { + groups = "vin0_data8", "vin0_clk", "vin0_sync"; + function = "vin0"; + }; + + vin1_8bit_pins: vin1 { + groups = "vin1_data8_b", "vin1_clk_b", "vin1_sync_b"; + function = "vin1"; + }; + + vin2_pins: vin2 { + groups = "vin2_g8", "vin2_clk"; + function = "vin2"; + }; + + vin3_pins: vin3 { + groups = "vin3_data8", "vin3_clk", "vin3_sync"; + function = "vin3"; + }; +}; + +&qspi { + /* Pins shared with VIN2, keep status disabled */ + status = "disabled"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scifb1 { + pinctrl-0 = <&scifb1_pins>; + pinctrl-names = "default"; + status = "okay"; + + rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; +}; + +/* + * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints + * + * (un)comment the #include statements to change configuration + */ + +/* 8bit CMOS Camera 1 (J13) */ +#define CAM_PARENT_I2C i2c0 +#define MCLK_CAM mclk_cam1 +#define CAM_EP cam0ep +#define VIN_EP vin0ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED +&vin0 { + /* + * Set SW2 switch on the SOM to 'ON' + * Set SW1 switch on camera board to 'OFF' as we are using 8bit mode + */ + status = "okay"; + pinctrl-0 = <&vin0_8bit_pins>; + pinctrl-names = "default"; + + port { + vin0ep: endpoint { + remote-endpoint = <&cam0ep>; + bus-width = <8>; + bus-type = <MEDIA_BUS_TYPE_BT656>; + }; + }; +}; +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP + +/* 8bit CMOS Camera 2 (J14) */ +#define CAM_PARENT_I2C i2c1 +#define MCLK_CAM mclk_cam2 +#define CAM_EP cam1ep +#define VIN_EP vin1ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED +&vin1 { + /* Set SW1 switch on the SOM to 'ON' */ + status = "okay"; + pinctrl-0 = <&vin1_8bit_pins>; + pinctrl-names = "default"; + + port { + vin1ep: endpoint { + remote-endpoint = <&cam1ep>; + bus-width = <8>; + bus-type = <MEDIA_BUS_TYPE_BT656>; + }; + }; +}; + +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP + +/* 8bit CMOS Camera 3 (J12) */ +#define CAM_PARENT_I2C i2c2 +#define MCLK_CAM mclk_cam3 +#define CAM_EP cam2ep +#define VIN_EP vin2ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED +&vin2 { + status = "okay"; + pinctrl-0 = <&vin2_pins>; + pinctrl-names = "default"; + + port { + vin2ep: endpoint { + remote-endpoint = <&cam2ep>; + bus-width = <8>; + data-shift = <8>; + bus-type = <MEDIA_BUS_TYPE_BT656>; + }; + }; +}; +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP + +/* 8bit CMOS Camera 4 (J11) */ +#define CAM_PARENT_I2C i2c3 +#define MCLK_CAM mclk_cam4 +#define CAM_EP cam3ep +#define VIN_EP vin3ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED +&vin3 { + status = "okay"; + pinctrl-0 = <&vin3_pins>; + pinctrl-names = "default"; + + port { + vin3ep: endpoint { + remote-endpoint = <&cam3ep>; + bus-width = <8>; + bus-type = <MEDIA_BUS_TYPE_BT656>; + }; + }; +}; +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP |