diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r8a7792-blanche.dts')
-rw-r--r-- | arch/arm/boot/dts/renesas/r8a7792-blanche.dts | 364 |
1 files changed, 364 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts new file mode 100644 index 0000000000..6a83923aa4 --- /dev/null +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Blanche board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2016 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a7792.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Blanche"; + compatible = "renesas,blanche", "renesas,r8a7792"; + + aliases { + serial0 = &scif0; + serial1 = &scif3; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + + pinctrl-0 = <&lan89218_pins>; + pinctrl-names = "default"; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x1_clk: x1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x2_clk: x2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <65000000>; + }; + + keyboard { + compatible = "gpio-keys"; + + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + + key-1 { + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + }; + key-2 { + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + }; + key-3 { + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + }; + key-4 { + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + key-a { + linux,code = <KEY_A>; + label = "SW24"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + }; + key-b { + linux,code = <KEY_B>; + label = "SW25"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio11 2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led17 { + gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>; + }; + led18 { + gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>; + }; + led19 { + gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>; + }; + led20 { + gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&can_clk { + clock-frequency = <48000000>; +}; + +&pfc { + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif3_pins: scif3 { + groups = "scif3_data"; + function = "scif3"; + }; + + lan89218_pins: lan89218 { + intc { + groups = "intc_irq0"; + function = "intc"; + }; + lbsc { + groups = "lbsc_ex_cs0"; + function = "lbsc"; + }; + }; + + can0_pins: can0 { + groups = "can0_data", "can_clk"; + function = "can0"; + }; + + sdhi0_pins: sdhi0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp"; + function = "du1"; + }; + + keyboard_pins: keyboard { + pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2"; + bias-pull-up; + }; + + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif3 { + pinctrl-0 = <&scif3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&irqc>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&iic3 { + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; + interrupt-parent = <&irqc>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins>, <&du1_pins>; + pinctrl-names = "default"; + + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; |