diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts')
-rw-r--r-- | arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts new file mode 100644 index 0000000000..31cdca3e62 --- /dev/null +++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZN1D-DB Board + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/rzn1-pinctrl.h> +#include <dt-bindings/net/pcs-rzn1-miic.h> + +#include "r9a06g032.dtsi" + +/ { + model = "RZN1D-DB Board"; + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&can0 { + pinctrl-0 = <&pins_can0>; + pinctrl-names = "default"; + + /* Assuming CN10/CN11 are wired for CAN1 */ + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&pins_can1>; + pinctrl-names = "default"; + + /* Please only enable can0 or can1, depending on CN10/CN11 */ + /* status = "okay"; */ +}; + +ð_miic { + status = "okay"; + renesas,miic-switch-portin = <MIIC_GMAC2_PORT>; +}; + +&gmac2 { + status = "okay"; + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&mii_conv4 { + renesas,miic-input = <MIIC_SWITCH_PORTB>; + status = "okay"; +}; + +&mii_conv5 { + renesas,miic-input = <MIIC_SWITCH_PORTA>; + status = "okay"; +}; + +&pinctrl { + pins_can0: pins_can0 { + pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>, /* CAN0_TXD */ + <RZN1_PINMUX(163, RZN1_FUNC_CAN)>; /* CAN0_RXD */ + drive-strength = <6>; + }; + + pins_can1: pins_can1 { + pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>, /* CAN1_TXD */ + <RZN1_PINMUX(110, RZN1_FUNC_CAN)>; /* CAN1_RXD */ + drive-strength = <6>; + }; + + pins_eth3: pins_eth3 { + pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>; + drive-strength = <6>; + bias-disable; + }; + + pins_eth4: pins_eth4 { + pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>; + drive-strength = <6>; + bias-disable; + }; + + pins_mdio1: pins_mdio1 { + pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>, + <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>; + }; +}; + +&rtc0 { + status = "okay"; +}; + +&switch { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>; + + dsa,member = <0 0>; + + mdio { + clock-frequency = <2500000>; + + #address-cells = <1>; + #size-cells = <0>; + + switch0phy4: ethernet-phy@4 { + reg = <4>; + micrel,led-mode = <1>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <5>; + micrel,led-mode = <1>; + }; + }; +}; + +&switch_port0 { + label = "lan0"; + phy-mode = "mii"; + phy-handle = <&switch0phy5>; + status = "okay"; +}; + +&switch_port1 { + label = "lan1"; + phy-mode = "mii"; + phy-handle = <&switch0phy4>; + status = "okay"; +}; + +&switch_port4 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; |