diff options
Diffstat (limited to 'arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts')
-rw-r--r-- | arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts | 528 |
1 files changed, 528 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts new file mode 100644 index 0000000000..309b122b4d --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts @@ -0,0 +1,528 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Fievel Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" +#include "rk3288-veyron-analog-audio.dtsi" + +/ { + model = "Google Fievel"; + compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7", + "google,veyron-fievel-rev6", "google,veyron-fievel-rev5", + "google,veyron-fievel-rev4", "google,veyron-fievel-rev3", + "google,veyron-fievel-rev2", "google,veyron-fievel-rev1", + "google,veyron-fievel-rev0", "google,veyron-fievel", + "google,veyron", "rockchip,rk3288"; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + + /* + * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys, + * enabled by vcc_18 + */ + vcc33_io: vcc33-io { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_io"; + }; + + vcc5_host1: vcc5-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb1_pwr_en>; + regulator-name = "vcc5_host1"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5_host2: vcc5-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb2_pwr_en>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwr_en>; + regulator-name = "vcc5_otg"; + regulator-always-on; + regulator-boot-on; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; +}; + +&gmac { + status = "okay"; + + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-handle = <ðphy>; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + rx_delay = <0x10>; + tx_delay = <0x30>; + + /* + * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) + * with a 30ms settling time. + */ + snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + wakeup-source; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&rk808 { + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + + vcc6-supply = <&vcc33_sys>; + vcc10-supply = <&vcc33_sys>; + vcc11-supply = <&vcc_5v>; + vcc12-supply = <&vcc33_sys>; + + regulators { + /delete-node/ LDO_REG1; + + /* + * According to the schematic, vcc18_lcdt is for + * HDMI_AVDD_1V8 + */ + vcc18_lcdt: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd18_lcdt"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * This is not a pwren anymore, but the real power supply, + * vdd10_lcd for HDMI_AVDD_1V0 + */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* for usb camera */ + vcc33_ccd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_ccd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-name = "vcc33_lan"; + }; + }; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + }; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "HUB_USB1_nFALUT", + "PHY_PMEB", + + "PHY_INT", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "", + "USB_OTG_POWER_EN", + "AP_WARM_RESET_H", + "USB_OTG_nFALUT", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "DEVMODE_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "VCC5V_GOOD_H", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO", + "", + "", + "", + "", + "", + + "PHY_TXD2", + "PHY_TXD3", + "MAC_RXD2", + "MAC_RXD3", + "PHY_TXD0", + "PHY_TXD1", + "MAC_RXD0", + "MAC_RXD1"; +}; + +&gpio4 { + gpio-line-names = "MAC_MDC", + "MAC_RXDV", + "MAC_RXER", + "MAC_CLK", + "PHY_TXEN", + "MAC_MDIO", + "MAC_RXCLK", + "", + + "PHY_RST", + "PHY_TXCLK", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "USB_OTG_CTL1", + "HUB_USB2_CTL1", + "HUB_USB2_PWR_EN", + "HUB_USB_ILIM_SEL", + + "USB_OTG_STATUS_L", + "HUB_USB1_CTL1", + "HUB_USB1_PWR_EN", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "HUB_USB2_nFALUT", + "USB_OTG_ILIM_SEL"; +}; + +&gpio7 { + gpio-line-names = "LCD_BL_PWM", + "PWM_LOG", + "BL_EN", + "PWR_LED1", + "TPM_INT_H", + "SPK_ON", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "", + "LCD_EN", + "DVS2", + + "HDMI_CEC", + "I2C4_SDA", + "I2C4_SCL", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + +&pinctrl { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + + /* Wake only */ + &bt_dev_wake_awake + &pwr_led1_on + >; + + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + + /* Sleep only */ + &bt_dev_wake_sleep + &pwr_led1_blink + >; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_int: phy-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led1_on: pwr-led1-on { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pwr_led1_blink: pwr-led1-blink { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-bc12 { + usb_otg_ilim_sel: usb-otg-ilim-sel { + rockchip,pins = <6 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + usb_usb_ilim_sel: usb-usb-ilim-sel { + rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + usb-host { + hub_usb1_pwr_en: hub_usb1_pwr_en { + rockchip,pins = <5 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_usb2_pwr_en: hub_usb2_pwr_en { + rockchip,pins = <5 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwr_en: usb_otg_pwr_en { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; |