diff options
Diffstat (limited to 'arch/arm/boot/dts/samsung/s5pv210-goni.dts')
-rw-r--r-- | arch/arm/boot/dts/samsung/s5pv210-goni.dts | 447 |
1 files changed, 447 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/samsung/s5pv210-goni.dts b/arch/arm/boot/dts/samsung/s5pv210-goni.dts new file mode 100644 index 0000000000..d32f42dd1b --- /dev/null +++ b/arch/arm/boot/dts/samsung/s5pv210-goni.dts @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Goni board. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; + }; + + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + vtf_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + pda_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + bat_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + tsp_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + wakeup-source; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + wakeup-source; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key-1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key-2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key-3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key-4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key-5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key-6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + noon010pc30: sensor@30 { + compatible = "siliconfile,noon010pc30"; + reg = <0x30>; + vddio-supply = <&ldo11_reg>; + vdda-supply = <&ldo13_reg>; + vdd_core-supply = <&ldo14_reg>; + + clock-frequency = <16000000>; + clocks = <&camera 0>; + clock-names = "mclk"; + nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>; + nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>; + + port { + noon010pc30_ep: endpoint { + remote-endpoint = <&fimc0_ep>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <1>; + pclk-sample = <1>; + }; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; + pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; + pinctrl-names = "default", "idle"; + + parallel-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* camera A input */ + port@1 { + reg = <1>; + fimc0_ep: endpoint { + remote-endpoint = <&noon010pc30_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + /* 480x800@55Hz */ + clock-frequency = <23439570>; + hactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vactive = <800>; + vback-porch = <2>; + vfront-porch = <28>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; +}; + +&onenand { + status = "okay"; +}; |