diff options
Diffstat (limited to 'arch/arm/boot/dts/st/spear1340.dtsi')
-rw-r--r-- | arch/arm/boot/dts/st/spear1340.dtsi | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/spear1340.dtsi b/arch/arm/boot/dts/st/spear1340.dtsi new file mode 100644 index 0000000000..51f6ffd08b --- /dev/null +++ b/arch/arm/boot/dts/st/spear1340.dtsi @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DTS file for all SPEAr1340 SoCs + * + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> + */ + +/include/ "spear13xx.dtsi" + +/ { + compatible = "st,spear1340"; + + ahb { + + spics: spics@e0700000 { + compatible = "st,spear-spics-gpio"; + reg = <0xe0700000 0x1000>; + st-spics,peripcfg-reg = <0x42c>; + st-spics,sw-enable-bit = <21>; + st-spics,cs-value-bit = <20>; + st-spics,cs-enable-mask = <3>; + st-spics,cs-enable-shift = <18>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + miphy0: miphy@eb800000 { + compatible = "st,spear1340-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { + compatible = "snps,spear-ahci"; + reg = <0xb1000000 0x10000>; + interrupts = <0 72 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + pcie0: pcie@b1000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; + reg-names = "dbi", "config"; + interrupts = <0 68 0x4>; + num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; + status = "disabled"; + }; + + i2s-play@b2400000 { + compatible = "snps,designware-i2s"; + reg = <0xb2400000 0x10000>; + interrupt-names = "play_irq"; + interrupts = <0 98 0x4>, + <0 99 0x4>; + play; + channel = <8>; + status = "disabled"; + }; + + i2s-rec@b2000000 { + compatible = "snps,designware-i2s"; + reg = <0xb2000000 0x10000>; + interrupt-names = "record_irq"; + interrupts = <0 100 0x4>, + <0 101 0x4>; + record; + channel = <8>; + status = "disabled"; + }; + + pinmux: pinmux@e0700000 { + compatible = "st,spear1340-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <3>; + }; + + pwm: pwm@e0180000 { + compatible = "st,spear13xx-pwm"; + reg = <0xe0180000 0x1000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + spdif-in@d0100000 { + compatible = "st,spdif-in"; + reg = < 0xd0100000 0x20000 + 0xd0110000 0x10000 >; + interrupts = <0 84 0x4>; + status = "disabled"; + }; + + spdif-out@d0000000 { + compatible = "st,spdif-out"; + reg = <0xd0000000 0x20000>; + interrupts = <0 85 0x4>; + status = "disabled"; + }; + + spi1: spi@5d400000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x5d400000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + + apb { + i2c1: i2c@b4000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xb4000000 0x1000>; + interrupts = <0 104 0x4>; + write-16bit; + status = "disabled"; + }; + + serial@b4100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb4100000 0x1000>; + interrupts = <0 105 0x4>; + status = "disabled"; + dmas = <&dwdma0 13 0 1>, + <&dwdma0 12 1 0>; + dma-names = "rx", "tx"; + }; + + thermal@e07008c4 { + st,thermal-flags = <0x2a00>; + }; + + gpiopinctrl: gpio@e2800000 { + compatible = "st,spear-plgpio"; + reg = <0xe2800000 0x1000>; + interrupts = <0 107 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 0 252>; + status = "disabled"; + + st-plgpio,ngpio = <250>; + st-plgpio,wdata-reg = <0x40>; + st-plgpio,dir-reg = <0x00>; + st-plgpio,ie-reg = <0x80>; + st-plgpio,rdata-reg = <0x20>; + st-plgpio,mis-reg = <0xa0>; + st-plgpio,eit-reg = <0x60>; + }; + }; + }; +}; |