diff options
Diffstat (limited to 'arch/arm/boot/dts/st/ste-dbx5x0.dtsi')
-rw-r--r-- | arch/arm/boot/dts/st/ste-dbx5x0.dtsi | 1238 |
1 files changed, 1238 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi new file mode 100644 index 0000000000..d5d88771ef --- /dev/null +++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi @@ -0,0 +1,1238 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 Linaro Ltd + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/ste-db8500-clkout.h> +#include <dt-bindings/reset/stericsson,db8500-prcc-reset.h> +#include <dt-bindings/mfd/dbx500-prcmu.h> +#include <dt-bindings/arm/ux500_pm_domains.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + /* This stablilizes the device enumeration */ + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + }; + + chosen { + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "ste,dbx500-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x300>; + clocks = <&prcmu_clk PRCMU_ARMSS>; + clock-names = "cpu"; + clock-latency = <20000>; + #cooling-cells = <2>; + }; + CPU1: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x301>; + }; + }; + + thermal-zones { + /* + * Thermal zone for the SoC, using the thermal sensor in the + * PRCMU for temperature and the cpufreq driver for passive + * cooling. + */ + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + /* + * This sensor fires interrupts to update the thermal + * zone, so no polling is needed. + */ + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu_alert: cpu-alert { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu-crit { + temperature = <85000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + trip = <&cpu_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <100>; + }; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "stericsson,db8500", "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + /* + * 640KB ESRAM (embedded static random access memory), divided + * into 5 banks of 128 KB each. This is a fast memory usually + * used by different accelerators. We group these according to + * their power domains: ESRAM0 (always on) ESRAM 1+2 and + * ESRAM 3+4. + */ + sram@40000000 { + /* The first (always on) ESRAM 0, 128 KB */ + compatible = "mmio-sram"; + reg = <0x40000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x20000>; + + sram@0 { + compatible = "stericsson,u8500-esram"; + reg = <0x0 0x10000>; + pool; + }; + lcpa: sram@10000 { + /* + * This eSRAM is used by the DMA40 DMA controller + * for Logical Channel Paramers (LCP), the address + * where these parameters are stored is called "LCPA". + * This is addressed directly by the driver so no + * pool is used. + */ + compatible = "stericsson,u8500-esram"; + label = "DMA40-LCPA"; + reg = <0x10000 0x800>; + }; + sram@10800 { + compatible = "stericsson,u8500-esram"; + reg = <0x10800 0xf800>; + pool; + }; + }; + sram@40020000 { + /* ESRAM 1+2, 256 KB */ + compatible = "mmio-sram"; + reg = <0x40020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40020000 0x40000>; + }; + sram@40060000 { + /* ESRAM 3+4, 256 KB */ + compatible = "mmio-sram"; + reg = <0x40060000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40060000 0x40000>; + + lcla: sram@20000 { + /* + * This eSRAM is used by the DMA40 DMA controller + * for Logical Channel Logical Addresses (LCLA), the address + * where these parameters are stored is called "LCLA". + * This is addressed directly by the driver so no + * pool is used. + */ + compatible = "stericsson,u8500-esram"; + label = "DMA40-LCLA"; + reg = <0x20000 0x2000>; + }; + }; + + ptm@801ae000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x801ae000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + cpu = <&CPU0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + }; + + ptm@801af000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x801af000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + cpu = <&CPU1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + }; + + funnel@801a6000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x801a6000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + out-ports { + port { + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + funnel_in_port1: endpoint { + remote-endpoint = <&ptm1_out_port>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "atclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + }; + + in-ports { + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + + tpiu@80190000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x80190000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + etb@801a4000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x801a4000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + intc: interrupt-controller@a0411000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xa0411000 0x1000>, + <0xa0410100 0x100>; + }; + + scu@a0410000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xa0410000 0x100>; + }; + + /* + * The backup RAM is used for retention during sleep + * and various things like spin tables + */ + backupram@80150000 { + compatible = "ste,dbx500-backupram"; + reg = <0x80150000 0x2000>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xa0412000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + pm_domains: pm_domains0 { + compatible = "stericsson,ux500-pm-domains"; + #power-domain-cells = <1>; + }; + + clocks { + compatible = "stericsson,u8500-clks"; + /* + * Registers for the CLKRST block on peripheral + * groups 1, 2, 3, 5, 6, + */ + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + prcc_reset: prcc-reset-controller { + #reset-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + + clkout_clk: clkout-clock { + /* Cell 1 id, cell 2 source, cell 3 div */ + #clock-cells = <3>; + }; + }; + + mtu@a03c6000 { + /* Nomadik System Timer */ + compatible = "st,nomadik-mtu"; + reg = <0xa03c6000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; + clock-names = "timclk", "apb_pclk"; + }; + + timer@a0410600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xa0410600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + + clocks = <&smp_twd_clk>; + }; + + watchdog@a0410620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xa0410620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&smp_twd_clk>; + }; + + rtc@80154000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x80154000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&rtc_clk>; + clock-names = "apb_pclk"; + }; + + gpio0: gpio@8012e000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8012e000 0x80>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <0>; + gpio-ranges = <&pinctrl 0 0 32>; + clocks = <&prcc_pclk 1 9>; + }; + + gpio1: gpio@8012e080 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <1>; + gpio-ranges = <&pinctrl 0 32 5>; + clocks = <&prcc_pclk 1 9>; + }; + + gpio2: gpio@8000e000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e000 0x80>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <2>; + gpio-ranges = <&pinctrl 0 64 32>; + clocks = <&prcc_pclk 3 8>; + }; + + gpio3: gpio@8000e080 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e080 0x80>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <3>; + gpio-ranges = <&pinctrl 0 96 2>; + clocks = <&prcc_pclk 3 8>; + }; + + gpio4: gpio@8000e100 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e100 0x80>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <4>; + gpio-ranges = <&pinctrl 0 128 32>; + clocks = <&prcc_pclk 3 8>; + }; + + gpio5: gpio@8000e180 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e180 0x80>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <5>; + gpio-ranges = <&pinctrl 0 160 12>; + clocks = <&prcc_pclk 3 8>; + }; + + gpio6: gpio@8011e000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8011e000 0x80>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <6>; + gpio-ranges = <&pinctrl 0 192 32>; + clocks = <&prcc_pclk 2 11>; + }; + + gpio7: gpio@8011e080 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8011e080 0x80>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <7>; + gpio-ranges = <&pinctrl 0 224 7>; + clocks = <&prcc_pclk 2 11>; + }; + + gpio8: gpio@a03fe000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0xa03fe000 0x80>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <8>; + gpio-ranges = <&pinctrl 0 256 12>; + clocks = <&prcc_pclk 5 1>; + }; + + pinctrl: pinctrl { + compatible = "stericsson,db8500-pinctrl"; + nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>, + <&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>, + <&gpio8>; + prcm = <&prcmu>; + }; + + usb_per5@a03e0000 { + compatible = "stericsson,db8500-musb"; + reg = <0xa03e0000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + + dr_mode = "otg"; + + dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ + <&dma 38 0 0x0>, /* Logical - MemToDev */ + <&dma 37 0 0x2>, /* Logical - DevToMem */ + <&dma 37 0 0x0>, /* Logical - MemToDev */ + <&dma 36 0 0x2>, /* Logical - DevToMem */ + <&dma 36 0 0x0>, /* Logical - MemToDev */ + <&dma 19 0 0x2>, /* Logical - DevToMem */ + <&dma 19 0 0x0>, /* Logical - MemToDev */ + <&dma 18 0 0x2>, /* Logical - DevToMem */ + <&dma 18 0 0x0>, /* Logical - MemToDev */ + <&dma 17 0 0x2>, /* Logical - DevToMem */ + <&dma 17 0 0x0>, /* Logical - MemToDev */ + <&dma 16 0 0x2>, /* Logical - DevToMem */ + <&dma 16 0 0x0>, /* Logical - MemToDev */ + <&dma 39 0 0x2>, /* Logical - DevToMem */ + <&dma 39 0 0x0>; /* Logical - MemToDev */ + + dma-names = "iep_1_9", "oep_1_9", + "iep_2_10", "oep_2_10", + "iep_3_11", "oep_3_11", + "iep_4_12", "oep_4_12", + "iep_5_13", "oep_5_13", + "iep_6_14", "oep_6_14", + "iep_7_15", "oep_7_15", + "iep_8", "oep_8"; + + clocks = <&prcc_pclk 5 0>; + }; + + dma: dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", "stericsson,dma40"; + reg = <0x801C0000 0x1000>; + reg-names = "base"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + sram = <&lcpa>, <&lcla>; + + #dma-cells = <3>; + memcpy-channels = <56 57 58 59 60>; + + clocks = <&prcmu_clk PRCMU_DMACLK>; + }; + + prcmu: prcmu@80157000 { + compatible = "stericsson,db8500-prcmu", "syscon"; + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + prcmu-timer-4@80157450 { + compatible = "stericsson,db8500-prcmu-timer-4"; + reg = <0x80157450 0xC>; + }; + + thermal: thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupt-parent = <&prcmu>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + #thermal-sensor-cells = <0>; + }; + + db8500-prcmu-regulators { + compatible = "stericsson,db8500-prcmu-regulator"; + + // DB8500_REGULATOR_VAPE + db8500_vape_reg: db8500_vape { + regulator-always-on; + }; + + // DB8500_REGULATOR_VARM + db8500_varm_reg: db8500_varm { + }; + + // DB8500_REGULATOR_VMODEM + db8500_vmodem_reg: db8500_vmodem { + }; + + // DB8500_REGULATOR_VPLL + db8500_vpll_reg: db8500_vpll { + }; + + // DB8500_REGULATOR_VSMPS1 + db8500_vsmps1_reg: db8500_vsmps1 { + }; + + // DB8500_REGULATOR_VSMPS2 + db8500_vsmps2_reg: db8500_vsmps2 { + }; + + // DB8500_REGULATOR_VSMPS3 + db8500_vsmps3_reg: db8500_vsmps3 { + }; + + // DB8500_REGULATOR_VRF1 + db8500_vrf1_reg: db8500_vrf1 { + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSP + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSPRET + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + }; + + // DB8500_REGULATOR_SWITCH_SVAPIPE + db8500_sva_pipe_reg: db8500_sva_pipe { + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSP + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSPRET + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + }; + + // DB8500_REGULATOR_SWITCH_SIAPIPE + db8500_sia_pipe_reg: db8500_sia_pipe { + }; + + // DB8500_REGULATOR_SWITCH_SGA + db8500_sga_reg: db8500_sga { + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_B2R2_MCDE + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12 + db8500_esram12_reg: db8500_esram12 { + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12RET + db8500_esram12_ret_reg: db8500_esram12_ret { + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34 + db8500_esram34_reg: db8500_esram34 { + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34RET + db8500_esram34_ret_reg: db8500_esram34_ret { + }; + }; + }; + + i2c0: i2c@80004000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; + reg = <0x80004000 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; + clock-names = "i2cclk", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>; + + status = "disabled"; + }; + + i2c1: i2c@80122000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; + reg = <0x80122000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>; + clock-names = "i2cclk", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C1>; + + status = "disabled"; + }; + + i2c2: i2c@80128000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; + reg = <0x80128000 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>; + clock-names = "i2cclk", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C2>; + + status = "disabled"; + }; + + i2c3: i2c@80110000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; + reg = <0x80110000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + + clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>; + clock-names = "i2cclk", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_I2C3>; + + status = "disabled"; + }; + + i2c4: i2c@8012a000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; + reg = <0x8012a000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>; + clock-names = "i2cclk", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C4>; + + status = "disabled"; + }; + + ssp0: spi@80002000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80002000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; + clock-names = "sspclk", "apb_pclk"; + dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ + <&dma 8 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP0>; + + status = "disabled"; + }; + + ssp1: spi@80003000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80003000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; + clock-names = "sspclk", "apb_pclk"; + dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ + <&dma 9 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP1>; + + status = "disabled"; + }; + + spi0: spi@8011a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x8011a000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; + clock-names = "sspclk", "apb_pclk"; + dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ + <&dma 0 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; + }; + + spi1: spi@80112000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80112000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; + clock-names = "sspclk", "apb_pclk"; + dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ + <&dma 35 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; + }; + + spi2: spi@80111000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80111000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; + clock-names = "sspclk", "apb_pclk"; + dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ + <&dma 33 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; + }; + + spi3: spi@80129000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80129000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; + clock-names = "sspclk", "apb_pclk"; + dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ + <&dma 40 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SPI3>; + + status = "disabled"; + }; + + serial0: serial@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */ + <&dma 13 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>; + clock-names = "uart", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART0>; + + status = "disabled"; + }; + + serial1: serial@80121000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80121000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */ + <&dma 12 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>; + clock-names = "uart", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART1>; + + status = "disabled"; + }; + + serial2: serial@80007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80007000 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */ + <&dma 11 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>; + clock-names = "uart", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_UART2>; + + status = "disabled"; + }; + + mmc@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80126000 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ + <&dma 29 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; + clock-names = "sdi", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SDI0>; + + status = "disabled"; + }; + + mmc@80118000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80118000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */ + <&dma 32 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>; + clock-names = "sdi", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI1>; + + status = "disabled"; + }; + + mmc@80005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80005000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */ + <&dma 28 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>; + clock-names = "sdi", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI2>; + + status = "disabled"; + }; + + mmc@80119000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80119000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */ + <&dma 41 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>; + clock-names = "sdi", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI3>; + + status = "disabled"; + }; + + mmc@80114000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */ + <&dma 42 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>; + clock-names = "sdi", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI4>; + + status = "disabled"; + }; + + mmc@80008000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80008000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */ + <&dma 43 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>; + clock-names = "sdi", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI5>; + + status = "disabled"; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + stericsson,cpu-dai = <&msp1 &msp3>; + }; + + msp0: msp@80123000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80123000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + v-ape-supply = <&db8500_vape_reg>; + + dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */ + <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>; + clock-names = "msp", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP0>; + + status = "disabled"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + v-ape-supply = <&db8500_vape_reg>; + + /* This DMA channel only exist on DB8500 v1 */ + dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */ + dma-names = "tx"; + + clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>; + clock-names = "msp", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP1>; + + status = "disabled"; + }; + + // HDMI sound + msp2: msp@80117000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80117000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + v-ape-supply = <&db8500_vape_reg>; + + dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */ + <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev + HighPrio - Fixed */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>; + clock-names = "msp", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_MSP2>; + + status = "disabled"; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + v-ape-supply = <&db8500_vape_reg>; + + /* This DMA channel only exist on DB8500 v2 */ + dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */ + dma-names = "rx"; + + clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>; + clock-names = "msp", "apb_pclk"; + resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP3>; + + status = "disabled"; + }; + + external-bus@50000000 { + compatible = "simple-bus"; + reg = <0x50000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x4000000>; + status = "disabled"; + }; + + gpu@a0300000 { + /* + * This block is referred to as "Smart Graphics Adapter SGA500" + * in documentation but is in practice a pretty straight-forward + * MALI-400 GPU block. + */ + compatible = "stericsson,db8500-mali", "arm,mali-400"; + reg = <0xa0300000 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "combined"; + clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>; + clock-names = "bus", "core"; + mali-supply = <&db8500_sga_reg>; + power-domains = <&pm_domains DOMAIN_VAPE>; + }; + + mcde@a0350000 { + compatible = "ste,mcde"; + reg = <0xa0350000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + epod-supply = <&db8500_b2r2_mcde_reg>; + clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ + <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ + <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */ + clock-names = "mcde", "lcd", "hdmi"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + dsi0: dsi@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi1: dsi@a0352000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0352000 0x1000>; + clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi2: dsi@a0353000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0353000 0x1000>; + /* This DSI port only has the Low Power / Energy Save clock */ + clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; + clock-names = "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cryp@a03cb000 { + compatible = "stericsson,ux500-cryp"; + reg = <0xa03cb000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&prcc_pclk 6 1>; + power-domains = <&pm_domains DOMAIN_VAPE>; + }; + + hash@a03c2000 { + compatible = "stericsson,ux500-hash"; + reg = <0xa03c2000 0x1000>; + clocks = <&prcc_pclk 6 2>; + power-domains = <&pm_domains DOMAIN_VAPE>; + }; + }; +}; |