diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp135f-dk.dts')
-rw-r--r-- | arch/arm/boot/dts/st/stm32mp135f-dk.dts | 362 |
1 files changed, 362 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts new file mode 100644 index 0000000000..eea740d097 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP135F-DK Discovery Board"; + compatible = "st,stm32mp135f-dk", "st,stm32mp135"; + + aliases { + serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@dd000000 { + reg = <0xdd000000 0x3000000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user { + label = "User-PA13"; + linux,code = <BTN_1>; + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_usb_cc_pins_a>; + vdda-supply = <&scmi_vdd_adc>; + vref-supply = <&scmi_vdd_adc>; + status = "okay"; + adc1: adc@0 { + status = "okay"; + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. + * Use arbitrary margin here (e.g. 5us). + */ + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; + channel@12 { + reg = <12>; + st,min-sample-time-ns = <5000>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <1000000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + mcp23017: pinctrl@21 { + compatible = "microchip,mcp23017"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default"; + pinctrl-0 = <&mcp23017_pins_a>; + interrupt-controller; + #interrupt-cells = <2>; + microchip,irq-mirror; + }; + + typec@53 { + compatible = "st,stm32g0-typec"; + reg = <0x53>; + /* Alert pin on PI2 */ + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + /* Internal pull-up on PI2 */ + pinctrl-names = "default"; + pinctrl-0 = <&stm32g0_intn_pins_a>; + firmware-name = "stm32g0-ucsi.mp135f-dk.fw"; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + con_usb_c_g0_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <170>; + i2c-scl-falling-time-ns = <5>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&scmi_regu { + scmi_vdd_adc: regulator@10 { + reg = <VOLTD_SCMI_STPMIC1_LDO1>; + regulator-name = "vdd_adc"; + }; + scmi_vdd_usb: regulator@13 { + reg = <VOLTD_SCMI_STPMIC1_LDO4>; + regulator-name = "vdd_usb"; + }; + scmi_vdd_sd: regulator@14 { + reg = <VOLTD_SCMI_STPMIC1_LDO5>; + regulator-name = "vdd_sd"; + }; + scmi_v1v8_periph: regulator@15 { + reg = <VOLTD_SCMI_STPMIC1_LDO6>; + regulator-name = "v1v8_periph"; + }; + scmi_v3v3_sw: regulator@19 { + reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>; + regulator-name = "v3v3_sw"; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&scmi_vdd_sd>; + status = "okay"; +}; + +&spi5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_pins_a>; + pinctrl-1 = <&spi5_sleep_pins_a>; + status = "disabled"; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a>; + pinctrl-1 = <&pwm4_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers8 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers14 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm14_pins_a>; + pinctrl-1 = <&pwm14_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@13 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart8_pins_a>; + pinctrl-1 = <&uart8_sleep_pins_a>; + pinctrl-2 = <&uart8_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + pinctrl-2 = <&usart2_idle_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + /* onboard HUB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + vdd-supply = <&scmi_v3v3_sw>; + }; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + usb-role-switch; + status = "okay"; + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usb_c_g0_ep>; + }; + }; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&scmi_vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; +}; + +&usbphyc_port1 { + phy-supply = <&scmi_vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; +}; |