diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts')
-rw-r--r-- | arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts new file mode 100644 index 0000000000..df97e03d2a --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame"; + compatible = "engicam,icore-stm32mp1-ctouch2-of10", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>; + default-on; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight>; + power-supply = <&v3v3>; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; +}; + +&dsi { + status = "okay"; +}; + +&dsi_in { + remote-endpoint = <<dc_ep0_out>; +}; + +&dsi_out { + remote-endpoint = <&bridge_in>; +}; + +&i2c6 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_pins_a>; + pinctrl-1 = <&i2c6_sleep_pins_a>; + status = "okay"; + + bridge@2c { + compatible = "ti,sn65dsi84"; + reg = <0x2c>; + enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + data-lanes = <1 2>; + }; + }; + + port@2 { + reg = <2>; + bridge_out: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; +}; + +<dc { + status = "okay"; + + port { + ltdc_ep0_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; |