diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts')
-rw-r--r-- | arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts new file mode 100644 index 0000000000..8a34d15e90 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2021 Rouven Czerwinski, Pengutronix + * Copyright (C) 2023 Leonard Göhrs, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc-lxa-tac.dtsi" + +/ { + model = "Linux Automation Test Automation Controller (TAC) Gen 2"; + compatible = "lxa,stm32mp157c-tac-gen2", "oct,stm32mp15xx-osd32", "st,stm32mp157"; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&v3v3>; + + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <7>; + pwms = <&led_pwm 3 1000000 0>; + }; + + reg_iobus_12v: regulator-iobus-12v { + compatible = "regulator-fixed"; + vin-supply = <®_12v>; + gpio = <&gpioh 13 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "12V_IOBUS"; + }; + + led-controller-1 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + max-brightness = <65535>; + + led-red { + active-low; + color = <LED_COLOR_ID_RED>; + pwms = <&led_pwm 0 1000000 0>; + }; + + led-green { + active-low; + color = <LED_COLOR_ID_GREEN>; + pwms = <&led_pwm 2 1000000 0>; + }; + + led-blue { + active-low; + color = <LED_COLOR_ID_BLUE>; + pwms = <&led_pwm 1 1000000 0>; + }; + }; + }; + + led-controller-2 { + compatible = "gpio-leds"; + + led-5 { + label = "tac:green:iobus"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + label = "tac:green:can"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + }; + + led-7 { + label = "tac:green:out0"; + gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>; + }; + + led-8 { + label = "tac:green:out1"; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + }; + + led-9 { + label = "tac:green:uarttx"; + gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>; + }; + + led-10 { + label = "tac:green:uartrx"; + gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>; + }; + + led-11 { + label = "tac:green:usbh1"; + gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>; + }; + + led-12 { + label = "tac:green:usbh2"; + gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>; + }; + + led-13 { + label = "tac:green:usbh3"; + gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>; + }; + + led-14 { + label = "tac:green:usbg"; + gpios = <&gpiod 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usb-gadget"; + }; + + led-15 { + label = "tac:green:dutpwr"; + gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpioa { + gpio-line-names = "", "", "DUT_PWR_EN", "", "STACK_CS3", /* 0 */ + "ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */ + "", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP", /* 10 */ + ""; /* 15 */ +}; + +&gpioc { + gpio-line-names = "", "DUT_PWR_DISCH", "", "", "", /* 0 */ + "", "", "", "", "", /* 5 */ + "", ""; /* 10 */ +}; + +&gpu { + status = "disabled"; +}; + +&m_can2 { + termination-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>; + termination-ohms = <120>; +}; + +&spi2 { + adc@0 { + compatible = "ti,lmp92064"; + reg = <0>; + + reset-gpios = <&gpioa 4 GPIO_ACTIVE_HIGH>; + shunt-resistor-micro-ohms = <15000>; + spi-max-frequency = <5000000>; + vdd-supply = <®_pb_3v3>; + vdig-supply = <®_pb_3v3>; + }; +}; + +&timers8 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + status = "okay"; + + led_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm8_pins_b>; + pinctrl-1 = <&pwm8_sleep_pins_b>; + status = "okay"; + }; +}; |