diff options
Diffstat (limited to 'arch/arm/boot/dts/xilinx/zynq-7000.dtsi')
-rw-r--r-- | arch/arm/boot/dts/xilinx/zynq-7000.dtsi | 539 |
1 files changed, 539 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi new file mode 100644 index 0000000000..a7db3f3009 --- /dev/null +++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 - 2014 Xilinx + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynq-7000"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + clocks = <&clkc 3>; + clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; + operating-points = < + /* kHz uV */ + 666667 1000000 + 333334 1000000 + >; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + clocks = <&clkc 3>; + }; + }; + + fpga_full: fpga-full { + compatible = "fpga-region"; + fpga-mgr = <&devcfg>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + pmu@f8891000 { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 5 4>, <0 6 4>; + interrupt-parent = <&intc>; + reg = <0xf8891000 0x1000>, + <0xf8893000 0x1000>; + }; + + regulator_vccpint: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + }; + in-ports { + /* replicator input port */ + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + + amba: axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + adc: adc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&intc>; + clocks = <&clkc 12>; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + gpio0: gpio@e000a000 { + compatible = "xlnx,zynq-gpio-1.0"; + #gpio-cells = <2>; + clocks = <&clkc 42>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; + + i2c0: i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 38>; + interrupt-parent = <&intc>; + interrupts = <0 25 4>; + clock-frequency = <400000>; + reg = <0xe0004000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@e0005000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 39>; + interrupt-parent = <&intc>; + interrupts = <0 48 4>; + clock-frequency = <400000>; + reg = <0xe0005000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller@f8f02000 { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + interrupts = <0 2 4>; + arm,data-latency = <3 2 2>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + mc: memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + }; + + uart0: serial@e0000000 { + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; + status = "disabled"; + clocks = <&clkc 23>, <&clkc 40>; + clock-names = "uart_clk", "pclk"; + reg = <0xE0000000 0x1000>; + interrupts = <0 27 4>; + }; + + uart1: serial@e0001000 { + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; + status = "disabled"; + clocks = <&clkc 24>, <&clkc 41>; + clock-names = "uart_clk", "pclk"; + reg = <0xE0001000 0x1000>; + interrupts = <0 50 4>; + }; + + spi0: spi@e0006000 { + compatible = "xlnx,zynq-spi-r1p6"; + reg = <0xe0006000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 26 4>; + clocks = <&clkc 25>, <&clkc 34>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + reg = <0xe0007000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + clocks = <&clkc 26>, <&clkc 35>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + qspi: spi@e000d000 { + compatible = "xlnx,zynq-qspi-1.0"; + reg = <0xe000d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 19 4>; + clocks = <&clkc 10>, <&clkc 43>; + clock-names = "ref_clk", "pclk"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gem0: ethernet@e000b000 { + compatible = "xlnx,zynq-gem", "cdns,gem"; + reg = <0xe000b000 0x1000>; + status = "disabled"; + interrupts = <0 22 4>; + clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; + clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gem1: ethernet@e000c000 { + compatible = "xlnx,zynq-gem", "cdns,gem"; + reg = <0xe000c000 0x1000>; + status = "disabled"; + interrupts = <0 45 4>; + clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; + clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + smcc: memory-controller@e000e000 { + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + reg = <0xe000e000 0x0001000>; + status = "disabled"; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */ + 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */ + 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */ + #address-cells = <2>; + #size-cells = <1>; + + nfc0: nand-controller@0,0 { + compatible = "arm,pl353-nand-r2p1"; + reg = <0 0 0x1000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sdhci0: mmc@e0100000 { + compatible = "arasan,sdhci-8.9a"; + status = "disabled"; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkc 21>, <&clkc 32>; + interrupt-parent = <&intc>; + interrupts = <0 24 4>; + reg = <0xe0100000 0x1000>; + }; + + sdhci1: mmc@e0101000 { + compatible = "arasan,sdhci-8.9a"; + status = "disabled"; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkc 22>, <&clkc 33>; + interrupt-parent = <&intc>; + interrupts = <0 47 4>; + reg = <0xe0101000 0x1000>; + }; + + slcr: slcr@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd"; + reg = <0xF8000000 0x1000>; + ranges; + clkc: clkc@100 { + #clock-cells = <1>; + compatible = "xlnx,ps7-clkc"; + fclk-enable = <0>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + reg = <0x100 0x100>; + }; + + rstc: rstc@200 { + compatible = "xlnx,zynq-reset"; + reg = <0x200 0x48>; + #reset-cells = <1>; + syscon = <&slcr>; + }; + + pinctrl0: pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + }; + }; + + dmac_s: dma-controller@f8003000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xf8003000 0x1000>; + interrupt-parent = <&intc>; + /* + * interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + * "dma4", "dma5", "dma6", "dma7"; + */ + interrupts = <0 13 4>, + <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, + <0 40 4>, <0 41 4>, + <0 42 4>, <0 43 4>; + #dma-cells = <1>; + clocks = <&clkc 27>; + clock-names = "apb_pclk"; + }; + + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 8 4>; + clocks = <&clkc 12>; + clock-names = "ref_clk"; + syscon = <&slcr>; + }; + + global_timer: timer@f8f00200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xf8f00200 0x20>; + interrupts = <1 11 0x301>; + interrupt-parent = <&intc>; + clocks = <&clkc 4>; + }; + + ttc0: timer@f8001000 { + interrupt-parent = <&intc>; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; + compatible = "cdns,ttc"; + clocks = <&clkc 6>; + reg = <0xF8001000 0x1000>; + }; + + ttc1: timer@f8002000 { + interrupt-parent = <&intc>; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; + compatible = "cdns,ttc"; + clocks = <&clkc 6>; + reg = <0xF8002000 0x1000>; + }; + + scutimer: timer@f8f00600 { + interrupt-parent = <&intc>; + interrupts = <1 13 0x301>; + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf8f00600 0x20>; + clocks = <&clkc 4>; + }; + + usb0: usb@e0002000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 28>; + interrupt-parent = <&intc>; + interrupts = <0 21 4>; + reg = <0xe0002000 0x1000>; + phy_type = "ulpi"; + }; + + usb1: usb@e0003000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 29>; + interrupt-parent = <&intc>; + interrupts = <0 44 4>; + reg = <0xe0003000 0x1000>; + phy_type = "ulpi"; + }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "cdns,wdt-r1p2"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + timeout-sec = <10>; + }; + + etb@f8801000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0xf8801000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + tpiu@f8803000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xf8803000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + funnel@f8804000 { + compatible = "arm,coresight-static-funnel", "arm,primecell"; + reg = <0xf8804000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + + /* funnel output ports */ + out-ports { + port { + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + funnel0_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + funnel0_in_port1: endpoint { + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + funnel0_in_port2: endpoint { + }; + }; + /* The other input ports are not connect to anything */ + }; + }; + + ptm@f889c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0xf889c000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + cpu = <&cpu0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; + }; + }; + }; + + ptm@f889d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0xf889d000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + cpu = <&cpu1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; + }; + }; + }; + }; +}; |