diff options
Diffstat (limited to 'arch/arm/boot/dts/xilinx/zynq-zc702.dts')
-rw-r--r-- | arch/arm/boot/dts/xilinx/zynq-zc702.dts | 424 |
1 files changed, 424 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts new file mode 100644 index 0000000000..6efdbca9d3 --- /dev/null +++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + */ +/dts-v1/; +#include "zynq-7000.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Xilinx ZC702 board"; + compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + switch-14 { + label = "sw14"; + gpios = <&gpio0 12 0>; + linux,code = <108>; /* down */ + wakeup-source; + autorepeat; + }; + switch-13 { + label = "sw13"; + gpios = <&gpio0 14 0>; + linux,code = <103>; /* up */ + wakeup-source; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&amba { + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffc0000 0x10000>; + ocm-sram@0 { + reg = <0x0 0x10000>; + }; + }; +}; + +&can0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio0 50 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 51 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + i2c-mux@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + adv7511: hdmi-tx@39 { + compatible = "adi,adv7511"; + reg = <0x39>; + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + adi,input-style = <3>; + adi,input-justification = "right"; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@34 { + compatible = "ti,ucd9248"; + reg = <0x34>; + }; + hwmon@35 { + compatible = "ti,ucd9248"; + reg = <0x35>; + }; + hwmon@36 { + compatible = "ti,ucd9248"; + reg = <0x36>; + }; + }; + }; +}; + +&pinctrl0 { + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO46"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO47"; + bias-disable; + }; + }; + + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7", "MIO8"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_50_grp", "gpio0_51_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_50_grp", "gpio0_51_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; +}; |