summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r--arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi5
-rw-r--r--arch/arm/boot/dts/broadcom/bcm2711.dtsi14
-rw-r--r--arch/arm/boot/dts/broadcom/bcm63138.dtsi6
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga.dtsi2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts2
-rw-r--r--arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts4
-rw-r--r--arch/arm/boot/dts/marvell/armada-370-rd.dts2
-rw-r--r--arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts8
-rw-r--r--arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts8
-rw-r--r--arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts16
-rw-r--r--arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts16
-rw-r--r--arch/arm/boot/dts/marvell/armada-388-gp.dts4
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi6
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi9
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts9
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi9
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-ns2max.dts18
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts18
-rw-r--r--arch/arm/boot/dts/marvell/kirkwood-synology.dtsi102
-rw-r--r--arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi8
-rw-r--r--arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts3
-rw-r--r--arch/arm/boot/dts/microchip/at91-sam9x60ek.dts3
-rw-r--r--arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts1
-rw-r--r--arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts1
-rw-r--r--arch/arm/boot/dts/microchip/at91-sama7g5ek.dts8
-rw-r--r--arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx1.dtsi4
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx25-pdk.dts1
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx25.dtsi39
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx27-pdk.dts18
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts15
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi26
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx27.dtsi4
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts4
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi9
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi7
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi6
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6sx.dtsi8
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6ul.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi1
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi9
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi4
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi8
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts2
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7s-warp.dts1
-rw-r--r--arch/arm/boot/dts/nxp/imx/imx7s.dtsi38
-rw-r--r--arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/ls/ls1021a.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/mxs/imx23.dtsi8
-rw-r--r--arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi1
-rw-r--r--arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts1
-rw-r--r--arch/arm/boot/dts/nxp/mxs/imx28.dtsi12
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi2
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-bk4.dts4
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts14
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts6
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts70
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts18
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts20
-rw-r--r--arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts18
-rw-r--r--arch/arm/boot/dts/qcom/Makefile7
-rw-r--r--arch/arm/boot/dts/qcom/pm8018.dtsi55
-rw-r--r--arch/arm/boot/dts/qcom/pm8058.dtsi159
-rw-r--r--arch/arm/boot/dts/qcom/pm8226.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom/pm8821.dtsi22
-rw-r--r--arch/arm/boot/dts/qcom/pm8921.dtsi137
-rw-r--r--arch/arm/boot/dts/qcom/pm8941.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts2
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts2
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts2
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts160
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts70
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts35
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts42
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts111
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064.dtsi203
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts31
-rw-r--r--arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi8
-rw-r--r--arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts4
-rw-r--r--arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi141
-rw-r--r--arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi183
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi327
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts17
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts17
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts23
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8226.dtsi44
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts61
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8660.dtsi217
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts372
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts53
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts67
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts291
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts27
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts7
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960.dtsi45
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts29
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi31
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974.dtsi122
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts29
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts31
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts11
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts31
-rw-r--r--arch/arm/boot/dts/qcom/qcom-sdx55.dtsi41
-rw-r--r--arch/arm/boot/dts/qcom/qcom-sdx65.dtsi47
-rw-r--r--arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi15
-rw-r--r--arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts28
-rw-r--r--arch/arm/boot/dts/renesas/r8a7740.dtsi65
-rw-r--r--arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts15
-rw-r--r--arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts4
-rw-r--r--arch/arm/boot/dts/renesas/r8a7779-marzen.dts48
-rw-r--r--arch/arm/boot/dts/renesas/r8a7790-lager.dts23
-rw-r--r--arch/arm/boot/dts/renesas/r8a7790-stout.dts15
-rw-r--r--arch/arm/boot/dts/renesas/r8a7791-koelsch.dts30
-rw-r--r--arch/arm/boot/dts/renesas/r8a7791-porter.dts26
-rw-r--r--arch/arm/boot/dts/renesas/r8a7792-blanche.dts49
-rw-r--r--arch/arm/boot/dts/renesas/r8a7792-wheat.dts21
-rw-r--r--arch/arm/boot/dts/renesas/r8a7793-gose.dts28
-rw-r--r--arch/arm/boot/dts/renesas/r8a7794-alt.dts4
-rw-r--r--arch/arm/boot/dts/renesas/r8a7794-silk.dts17
-rw-r--r--arch/arm/boot/dts/renesas/r9a06g032.dtsi2
-rw-r--r--arch/arm/boot/dts/rockchip/Makefile3
-rw-r--r--arch/arm/boot/dts/rockchip/rk3036-kylin.dts21
-rw-r--r--arch/arm/boot/dts/rockchip/rk3036.dtsi4
-rw-r--r--arch/arm/boot/dts/rockchip/rk3066a.dtsi5
-rw-r--r--arch/arm/boot/dts/rockchip/rk3128-evb.dts5
-rw-r--r--arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts425
-rw-r--r--arch/arm/boot/dts/rockchip/rk3128.dtsi185
-rw-r--r--arch/arm/boot/dts/rockchip/rk322x.dtsi20
-rw-r--r--arch/arm/boot/dts/rockchip/rk3288.dtsi25
-rw-r--r--arch/arm/boot/dts/rockchip/rk3xxx.dtsi4
-rw-r--r--arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts21
-rw-r--r--arch/arm/boot/dts/rockchip/rv1109.dtsi23
-rw-r--r--arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts2
-rw-r--r--arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi72
-rw-r--r--arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts29
-rw-r--r--arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi404
-rw-r--r--arch/arm/boot/dts/rockchip/rv1126.dtsi21
-rw-r--r--arch/arm/boot/dts/samsung/exynos4210-i9100.dts40
-rw-r--r--arch/arm/boot/dts/samsung/exynos4x12.dtsi5
-rw-r--r--arch/arm/boot/dts/st/ste-dbx5x0.dtsi18
-rw-r--r--arch/arm/boot/dts/st/ste-href-ab8500.dtsi48
-rw-r--r--arch/arm/boot/dts/st/ste-href-ab8505.dtsi490
-rw-r--r--arch/arm/boot/dts/st/ste-href.dtsi55
-rw-r--r--arch/arm/boot/dts/st/ste-href520-tvk.dts1
-rw-r--r--arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts1
-rw-r--r--arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts1
-rw-r--r--arch/arm/boot/dts/st/ste-hrefprev60.dtsi2
-rw-r--r--arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts1
-rw-r--r--arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts1
-rw-r--r--arch/arm/boot/dts/st/ste-hrefv60plus.dtsi3
-rw-r--r--arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi8
-rw-r--r--arch/arm/boot/dts/st/ste-snowball.dts2
-rw-r--r--arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts2
-rw-r--r--arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts2
-rw-r--r--arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts2
-rw-r--r--arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts2
-rw-r--r--arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts2
-rw-r--r--arch/arm/boot/dts/st/stm32f469-disco.dts15
-rw-r--r--arch/arm/boot/dts/st/stm32f746.dtsi61
-rw-r--r--arch/arm/boot/dts/st/stm32mp135.dtsi11
-rw-r--r--arch/arm/boot/dts/st/stm32mp151.dtsi4
-rw-r--r--arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi2
-rw-r--r--arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts2
-rw-r--r--arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi2
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts2
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts2
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi4
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts2
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-ev1.dts1
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts4
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi4
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi3
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi1
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi1
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi2
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi2
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi2
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi2
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi1
-rw-r--r--arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi6
-rw-r--r--arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts2
-rw-r--r--arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi6
-rw-r--r--arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts2
-rw-r--r--arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi6
-rw-r--r--arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi6
-rw-r--r--arch/arm/boot/dts/ti/omap/Makefile14
-rw-r--r--arch/arm/boot/dts/ti/omap/am571x-idk.dts4
-rw-r--r--arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts2
-rw-r--r--arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi4
-rw-r--r--arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi4
-rw-r--r--arch/arm/boot/dts/ti/omap/dra71-evm.dts4
-rw-r--r--arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi4
-rw-r--r--arch/arm/boot/dts/ti/omap/dra76-evm.dts4
-rw-r--r--arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts2
-rw-r--r--arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi298
-rw-r--r--arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi234
-rw-r--r--arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi21
-rw-r--r--arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi75
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts11
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts19
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts18
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts46
-rw-r--r--arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts17
221 files changed, 5517 insertions, 1791 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 98817a6675..d233a191c1 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm2835-rpi.dtsi"
+#include <dt-bindings/power/raspberrypi-power.h>
#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
/ {
@@ -76,3 +77,7 @@
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
+
+&xhci {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index 4a379a1496..22c7f15613 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -604,6 +604,20 @@
};
};
+ xhci: usb@7e9c0000 {
+ compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+ reg = <0x0 0x7e9c0000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ /* DWC2 and this IP block share the same USB PHY,
+ * enabling both at the same time results in lockups.
+ * So keep this node disabled and let the bootloader
+ * decide which interface should be enabled.
+ */
+ status = "disabled";
+ };
+
v3d: gpu@7ec00000 {
compatible = "brcm,2711-v3d";
reg = <0x0 0x7ec00000 0x4000>,
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
index 93281c47c9..4ef0228361 100644
--- a/arch/arm/boot/dts/broadcom/bcm63138.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -232,6 +232,12 @@
interrupt-names = "nand";
};
+ serial@4400 {
+ compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+ reg = <0x4400 0x1e0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
bootlut: bootlut@8000 {
compatible = "brcm,bcm63138-bootlut";
reg = <0x8000 0x50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
index 4c1d140f40..35be14150f 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -768,7 +768,7 @@
status = "disabled";
};
- nand0: nand@ff900000 {
+ nand0: nand-controller@ff900000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "altr,socfpga-denali-nand";
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index f36063c57c..6b6e77596f 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -669,7 +669,7 @@
status = "disabled";
};
- nand: nand@ffb90000 {
+ nand: nand-controller@ffb90000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "altr,socfpga-denali-nand";
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 11ccdc6c2d..0434f1c7b6 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -17,8 +17,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <3>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
index c48385702a..7342f5942b 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -124,8 +124,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
index c7f5fa0ba0..d37a982e85 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -129,8 +129,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
index 3dd99c7c95..9e4db7407f 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -174,8 +174,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index 2564671fc1..ce0d6514ee 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -121,8 +121,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index e0630b0eed..65f390bf89 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -229,8 +229,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
@@ -246,8 +244,6 @@
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index 1b241da11e..f23f6b3fc8 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -95,7 +95,7 @@
gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = <0 0 3000 1>;
+ gpio-fan,speed-map = <0 0>, <3000 1>;
pinctrl-0 = <&fan_pins>;
pinctrl-names = "default";
};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e668..6ec3dd3337 100644
--- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
gpio-fan {
gpio-fan,speed-map =
- < 0 3
- 950 2
- 1400 1
- 1800 0>;
+ < 0 3>,
+ < 950 2>,
+ <1400 1>,
+ <1800 0>;
};
};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
index 370ca9c432..3011578a31 100644
--- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -106,10 +106,10 @@
gpio-fan {
gpio-fan,speed-map =
- < 0 3
- 800 2
- 1050 1
- 1300 0>;
+ < 0 3>,
+ < 800 2>,
+ <1050 1>,
+ <1300 0>;
};
};
diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
index b07d11d1f1..02599a3e98 100644
--- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -113,14 +113,14 @@
&gpio2 0 GPIO_ACTIVE_HIGH
&gpio2 1 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 1000 1
- 1150 2
- 1350 4
- 1500 3
- 1650 5
- 1750 6
- 1900 7 >;
+ gpio-fan,speed-map = < 0 0>,
+ <1000 1>,
+ <1150 2>,
+ <1350 4>,
+ <1500 3>,
+ <1650 5>,
+ <1750 6>,
+ <1900 7>;
};
gpio-leds {
diff --git a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index ea91ff964d..6caa5c5017 100644
--- a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
<&gpio1 17 GPIO_ACTIVE_HIGH>,
<&gpio1 16 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 1500 1
- 2500 2
- 3000 3
- 3400 4
- 3700 5
- 3900 6
- 4000 7>;
+ gpio-fan,speed-map = < 0 0>,
+ <1500 1>,
+ <2500 2>,
+ <3000 3>,
+ <3400 4>,
+ <3700 5>,
+ <3900 6>,
+ <4000 7>;
#cooling-cells = <2>;
};
diff --git a/arch/arm/boot/dts/marvell/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
index e2ba50520b..1de0a172aa 100644
--- a/arch/arm/boot/dts/marvell/armada-388-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
gpio-fan {
compatible = "gpio-fan";
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 3000 1>;
+ gpio-fan,speed-map = < 0 0>,
+ <3000 1>;
};
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index eb917462b2..0738eb679f 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -38,9 +38,9 @@
pinctrl-names = "default";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = <0 0
- 3000 1
- 6000 2>;
+ gpio-fan,speed-map = <0 0>,
+ <3000 1>,
+ <6000 2>;
};
gpio_poweroff {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e9702..dfac2045a1 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
gpios = <&gpio0 17 GPIO_ACTIVE_LOW
&gpio0 16 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ gpio-fan,speed-map =
+ < 0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
index c6024b5694..0425df8cb9 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
&gpio1 15 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ gpio-fan,speed-map =
+ < 0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 88b70ba1c8..f80af24b9e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -172,10 +172,11 @@
pinctrl-names = "default";
gpios = <&gpio0 19 GPIO_ACTIVE_LOW
&gpio0 18 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ gpio-fan,speed-map =
+ <0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index c0a087e774..044958bc55 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
&gpio1 1 GPIO_ACTIVE_LOW
&gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
- < 0 0
- 1500 15
- 1700 14
- 1800 13
- 2100 12
- 3100 11
- 3300 10
- 4300 9
- 5500 8>;
+ < 0 0>,
+ <1500 15>,
+ <1700 14>,
+ <1800 13>,
+ <2100 12>,
+ <3100 11>,
+ <3300 10>,
+ <4300 9>,
+ <5500 8>;
alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 5b9fa14b64..3fbe008f91 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
&gpio1 1 GPIO_ACTIVE_LOW
&gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
- < 0 0
- 3000 15
- 3180 14
- 4140 13
- 4570 12
- 6760 11
- 7140 10
- 7980 9
- 9200 8>;
+ < 0 0>,
+ <3000 15>,
+ <3180 14>,
+ <4140 13>,
+ <4570 12>,
+ <6760 11>,
+ <7140 10>,
+ <7980 9>,
+ <9200 8>;
alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 9b6666020c..20964eb48f 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
&gpio1 1 GPIO_ACTIVE_HIGH
&gpio1 2 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2200 1
- 2500 2
- 3000 4
- 3300 3
- 3700 5
- 3800 6
- 4200 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2200 1>,
+ <2500 2>,
+ <3000 4>,
+ <3300 3>,
+ <3700 5>,
+ <3800 6>,
+ <4200 7>;
};
gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2200 1
- 2500 2
- 3000 4
- 3300 3
- 3700 5
- 3800 6
- 4200 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2200 1>,
+ <2500 2>,
+ <3000 4>,
+ <3300 3>,
+ <3700 5>,
+ <3800 6>,
+ <4200 7>;
};
gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
&gpio1 1 GPIO_ACTIVE_HIGH
&gpio1 2 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
&gpio1 12 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-leds-alarm-12 {
diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c..a260c42dbd 100644
--- a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
pinctrl-names = "default";
gpio-fan,speed-map =
- <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ < 0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
};
};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
index 83372c1f29..c6fbdd2901 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -249,6 +249,8 @@
ethernet-phy@0 {
reg = <0x0>;
+ interrupt-parent = <&pioB>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -353,6 +355,7 @@
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 5cd593028a..f3cbb675ce 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -292,6 +292,8 @@
ethernet-phy@0 {
reg = <0x0>;
+ interrupt-parent = <&pioB>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -465,6 +467,7 @@
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index d0a6dbd377..f3ffb8f01d 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -54,7 +54,6 @@
sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
- mmc-ddr-3_3v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e2fe..15239834d8 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@
&sdmmc0 {
bus-width = <4>;
- mmc-ddr-3_3v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 217e9b96c6..20b2497657 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -293,7 +293,7 @@
regulator-state-standby {
regulator-on-in-suspend;
- regulator-suspend-voltage = <1150000>;
+ regulator-suspend-microvolt = <1150000>;
regulator-mode = <4>;
};
@@ -314,7 +314,7 @@
regulator-state-standby {
regulator-on-in-suspend;
- regulator-suspend-voltage = <1050000>;
+ regulator-suspend-microvolt = <1050000>;
regulator-mode = <4>;
};
@@ -331,7 +331,7 @@
regulator-always-on;
regulator-state-standby {
- regulator-suspend-voltage = <1800000>;
+ regulator-suspend-microvolt = <1800000>;
regulator-on-in-suspend;
};
@@ -346,7 +346,7 @@
regulator-max-microvolt = <3700000>;
regulator-state-standby {
- regulator-suspend-voltage = <1800000>;
+ regulator-suspend-microvolt = <1800000>;
regulator-on-in-suspend;
};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
index 16b374e648..8c1d5c9fa4 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -446,7 +446,7 @@
tegra_ac97: ac97@70002000 {
status = "okay";
nvidia,codec-reset-gpio =
- <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+ <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
nvidia,codec-sync-gpio =
<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index 4aeb74479f..1ac10965fd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -68,7 +68,7 @@
interrupt-parent = <&aitc>;
ranges;
- aipi@200000 {
+ bus@200000 {
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -155,7 +155,7 @@
};
};
- aipi@210000 {
+ bus@210000 {
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index e93bf3b711..dd176fb54e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -122,6 +122,7 @@
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ #sound-dai-cells = <0>;
clocks = <&clks 129>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index f65c7234f9..9cfff2151b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -68,6 +68,16 @@
};
};
+ usbphy0: usb-phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ usbphy1: usb-phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -93,7 +103,7 @@
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f80000 0x4000>;
clocks = <&clks 48>;
- clock-names = "";
+ clock-names = "ipg";
interrupts = <3>;
status = "disabled";
};
@@ -104,7 +114,7 @@
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f84000 0x4000>;
clocks = <&clks 48>;
- clock-names = "";
+ clock-names = "ipg";
interrupts = <10>;
status = "disabled";
};
@@ -151,7 +161,7 @@
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f98000 0x4000>;
clocks = <&clks 48>;
- clock-names = "";
+ clock-names = "ipg";
interrupts = <4>;
status = "disabled";
};
@@ -178,12 +188,9 @@
};
kpp: kpp@43fa8000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
reg = <0x43fa8000 0x4000>;
clocks = <&clks 102>;
- clock-names = "";
interrupts = <24>;
status = "disabled";
};
@@ -597,7 +604,7 @@
#size-cells = <1>;
};
- emi@80000000 {
+ bus@80000000 {
compatible = "fsl,emi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -617,22 +624,4 @@
};
};
};
-
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy@0 {
- reg = <0>;
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
-
- usbphy1: usb-phy@1 {
- reg = <1>;
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
- };
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
index 35123b7cb6..21d436972a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
reg = <0xa0000000 0x08000000>;
};
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clks IMX27_CLK_DUMMY>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
+
+ usbphy0: usbphy {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX27_CLK_DUMMY>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 67b235044b..b8048e12e3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -48,15 +48,12 @@
regulator-always-on;
};
- usbphy {
- usbphy2: usbphy@2 {
- compatible = "usb-nop-xceiv";
- reg = <2>;
- vcc-supply = <&reg_5v0>;
- clocks = <&clks IMX27_CLK_DUMMY>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
+ usbphy2: usbphy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&reg_5v0>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 8d428c8446..e958d7286a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -29,19 +29,13 @@
regulator-max-microvolt = <5000000>;
};
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- vcc-supply = <&sw3_reg>;
- clocks = <&clks IMX27_CLK_DUMMY>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
+
+ usbphy0: usbphy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&sw3_reg>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
};
};
@@ -49,12 +43,12 @@
status = "okay";
/* SSI0 <=> PINS_4 (MC13783 Audio) */
- ssi0 {
+ mux-ssi0 {
fsl,audmux-port = <0>;
fsl,port-config = <0xcb205000>;
};
- pins4 {
+ mux-pins4 {
fsl,audmux-port = <2>;
fsl,port-config = <0x00001000>;
};
@@ -186,7 +180,7 @@
reg = <0x52>;
};
- pcf8563@51 {
+ rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index cac4b3d689..ec472695c7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -81,7 +81,7 @@
interrupt-parent = <&aitc>;
ranges;
- aipi1: aipi@10000000 { /* AIPI1 */
+ aipi1: bus@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -453,7 +453,7 @@
};
};
- aipi2: aipi@10020000 { /* AIPI2 */
+ aipi2: bus@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
index 055d23a9ae..0814f5665a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
};
display-0 {
- #address-cells =<1>;
+ #address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
index 7d4ae113c3..63cdf24eb3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
@@ -22,7 +22,7 @@
compatible = "ilitek,ili251x";
reg = <0x41>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
index 9c5938e16d..2e75d700ef 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
@@ -22,7 +22,7 @@
compatible = "ilitek,ili251x";
reg = <0x41>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
index 01df7cffce..94625d5d59 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
@@ -22,7 +22,7 @@
compatible = "eeti,exc80h60";
reg = <0x2a>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
index a015453daf..b3cfa8110a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
@@ -22,7 +22,7 @@
compatible = "eeti,exc80h60";
reg = <0x2a>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
index b71ee6b792..7edc788bcb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
@@ -22,7 +22,7 @@
compatible = "eeti,exc80h84";
reg = <0x2a>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
touchscreen-inverted-x;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
index 6f9d094dd6..18a620832a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -16,7 +16,7 @@
compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
panel0: lvds-panel0 {
- compatible = "panel-lvds";
+ compatible = "panel-lvds";
backlight = <&backlight_lvds>;
width-mm = <152>;
height-mm = <91>;
@@ -43,7 +43,7 @@
};
panel1: lvds-panel1 {
- compatible = "panel-lvds";
+ compatible = "panel-lvds";
width-mm = <152>;
height-mm = <91>;
data-mapping = "jeida-18";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index dcb4f6a32f..ea40623d12 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -12,6 +12,13 @@
model = "Toradex Apalis iMX6Q/D Module";
compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+ aliases {
+ mmc0 = &usdhc3; /* eMMC */
+ mmc1 = &usdhc1; /* MMC1 slot */
+ mmc2 = &usdhc2; /* SD1 slot */
+ /delete-property/ mmc3;
+ };
+
/* Will be filled by the bootloader */
memory@10000000 {
device_type = "memory";
@@ -166,7 +173,7 @@
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 6cc4d6fd5f..d3a7a6eeb8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -12,6 +12,13 @@
model = "Toradex Colibri iMX6DL/S Module";
compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+ aliases {
+ mmc0 = &usdhc3; /* eMMC */
+ mmc1 = &usdhc1; /* MMC/SD Slot */
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <0 45 63 88 119 158 203 255>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
index f1a41c7672..5587069b60 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -54,7 +54,7 @@
clk_codec: clock-codec {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <12000000>;
+ clock-frequency = <12000000>;
};
sound {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
index da0f8dae1e..4d2abcd44e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -500,21 +500,21 @@
pinctrl_pwm1: pwm1grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
index b81799d707..596b3bb3dd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -25,7 +25,7 @@
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_touch>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index bda182edc5..81142c523f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -475,7 +475,7 @@
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index f6b35923ad..df3a375f0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -418,7 +418,7 @@
<&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};
@@ -1010,7 +1010,7 @@
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
@@ -1024,7 +1024,7 @@
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
@@ -1038,7 +1038,7 @@
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index 3b87d980e9..a27a7554c2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -364,7 +364,7 @@
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
index 3fdece5bd3..5248a05823 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -805,6 +805,7 @@
&pinctrl_usb_pwr>;
dr_mode = "host";
power-active-high;
+ over-current-active-low;
disable-over-current;
status = "okay";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a468..3fc3130f9d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@
};
};
- /* NXP SE97BTP with temperature sensor + eeprom */
+ /* LM75A temperature sensor, TQMa7x 01xx */
+ lm75a: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
se97b: temperature-sensor-eeprom@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
- status = "okay";
};
/* ST M24C64 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
index 3740e34ef9..9670f45eab 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -11,6 +11,10 @@
/* Required to properly pass MAC addresses from bootloader. */
ethernet0 = &fec1;
ethernet1 = &fec2;
+ mmc0 = &usdhc3; /* eMMC */
+ mmc1 = &usdhc1; /* MMC/SD slot */
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
index dd8003bd1f..f0fda15f30 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <&reg_wlreg_on>;
- vqmmc-supply =<&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
status = "okay";
brcmf: wifi@1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
index c5eefe89cd..8d5037ac03 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
@@ -108,6 +108,14 @@
assigned-clock-rates = <0>, <32768>;
};
+&cpu0 {
+ cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+ cpu-supply = <&sw1a_reg>;
+};
+
&ecspi3 {
cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
index 85b97b5f64..7ed27c7ad7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
@@ -149,7 +149,7 @@
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_i2c2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index ba7231b364..7bab113ca6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -210,6 +210,7 @@
remote-endpoint = <&mipi_from_sensor>;
clock-lanes = <0>;
data-lanes = <1>;
+ link-frequencies = /bits/ 64 <330000000>;
};
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 4569d2b8ed..9c81c6baa2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -183,6 +183,15 @@
interrupt-parent = <&gpc>;
ranges;
+ ocram: sram@900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&clks IMX7D_OCRAM_CLK>;
+ };
+
funnel@30041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30041000 0x1000>;
@@ -609,6 +618,7 @@
nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+ #thermal-sensor-cells = <0>;
};
};
@@ -724,6 +734,8 @@
clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
<&clks IMX7D_ECSPI4_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
status = "disabled";
};
@@ -854,6 +866,26 @@
};
};
};
+
+ mipi_dsi: dsi@30760000 {
+ compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30760000 0x400>;
+ clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "bus_clk", "sclk_mipi";
+ assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+ <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+ assigned-clock-rates = <0>, <333000000>;
+ power-domains = <&pgc_mipi_phy>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,burst-clock-frequency = <891000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ status = "disabled";
+ };
};
aips3: bus@30800000 {
@@ -879,6 +911,8 @@
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
<&clks IMX7D_ECSPI1_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
status = "disabled";
};
@@ -891,6 +925,8 @@
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
<&clks IMX7D_ECSPI2_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
status = "disabled";
};
@@ -903,6 +939,8 @@
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
<&clks IMX7D_ECSPI3_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index 5a8b867d7d..e78d0a7d8c 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -467,7 +467,7 @@
pinctrl_pwm2: pwm2grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050
>;
};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 9cf09c183b..6dd73290f0 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -74,7 +74,7 @@
sct_pwm: pwm@40000000 {
compatible = "nxp,lpc1850-sct-pwm";
reg = <0x40000000 0x1000>;
- clocks =<&ccu1 CLK_CPU_SCT>;
+ clocks = <&ccu1 CLK_CPU_SCT>;
clock-names = "pwm";
resets = <&rgu 37>;
#pwm-cells = <3>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index 49c78c84cd..d471cc5efa 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -112,7 +112,7 @@
compatible = "fsl,ls1021a-msi";
reg = <0x0 0x1570e00 0x0 0x8>;
msi-controller;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
};
msi2: msi-controller@1570e08 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 9cba1d0224..0309592af1 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -110,7 +110,7 @@
reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
- compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx23-gpio";
reg = <0>;
interrupts = <16>;
gpio-controller;
@@ -120,7 +120,7 @@
};
gpio1: gpio@1 {
- compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx23-gpio";
reg = <1>;
interrupts = <17>;
gpio-controller;
@@ -130,7 +130,7 @@
};
gpio2: gpio@2 {
- compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx23-gpio";
reg = <2>;
interrupts = <18>;
gpio-controller;
@@ -484,7 +484,7 @@
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+ compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
index bb971e660d..69fcb0dde9 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
memory@40000000 {
reg = <0x40000000 0x08000000>;
+ device_type = "memory";
};
reg_3v3: regulator-reg-3v3 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 153e401795..5485fe118d 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -260,6 +260,7 @@
sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ #sound-dai-cells = <0>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&mclk>;
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 37b9d409a5..4817fba2d9 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -164,7 +164,7 @@
reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <0>;
interrupts = <127>;
gpio-controller;
@@ -174,7 +174,7 @@
};
gpio1: gpio@1 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <1>;
interrupts = <126>;
gpio-controller;
@@ -184,7 +184,7 @@
};
gpio2: gpio@2 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <2>;
interrupts = <125>;
gpio-controller;
@@ -194,7 +194,7 @@
};
gpio3: gpio@3 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <3>;
interrupts = <124>;
gpio-controller;
@@ -204,7 +204,7 @@
};
gpio4: gpio@4 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <4>;
interrupts = <123>;
gpio-controller;
@@ -1100,7 +1100,7 @@
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+ compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
index 14c411f146..5a19da9313 100644
--- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -55,7 +55,7 @@
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_3v3>;
- status = "okay";
+ status = "okay";
};
&dcu0 {
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index e4f691d601..722182f5fd 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -68,7 +68,7 @@
#address-cells = <1>;
#size-cells = <0>;
/* PTD12 ->RPIO[91] */
- sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
/* PTD10 ->RPIO[89] */
miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
@@ -79,7 +79,7 @@
gpio-controller;
#gpio-cells = <2>;
/* PTB18 -> RGPIO[40] */
- load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
spi-max-frequency = <100000>;
};
};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 1a19aec895..7e72f860c3 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -162,7 +162,7 @@
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "eth_cu_1000_1";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_2";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_1000_3";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_fc_1000_1";
phy-mode = "1000base-x";
@@ -200,7 +200,7 @@
sfp = <&sff>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
phy-mode = "rmii";
ethernet = <&fec1>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index a248b8a453..029f49be40 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -294,11 +294,11 @@
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
- sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
- &gpio1 8 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+ &gpio1 8 GPIO_ACTIVE_HIGH>;
num-chipselects = <2>;
flash@0 {
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
index df1335492a..77492eeea4 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -47,17 +47,17 @@
#address-cells = <1>;
#size-cells = <0>;
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
@@ -68,37 +68,37 @@
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "aib2main_1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "aib2main_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_1000_5";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_cu_1000_6";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_4";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_7";
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "modem_pic";
@@ -108,7 +108,7 @@
};
};
- switch0port10: port@10 {
+ switch0port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
@@ -130,32 +130,32 @@
#address-cells = <1>;
#size-cells = <0>;
- switch1: switch1@0 {
+ switch1: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 1>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_100_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_100_3";
};
- switch1port9: port@9 {
+ switch1port9: ethernet-port@9 {
reg = <9>;
label = "dsa";
phy-mode = "xgmii";
@@ -168,7 +168,7 @@
};
};
- switch1port10: port@10 {
+ switch1port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
@@ -188,17 +188,17 @@
#address-cells = <1>;
#size-cells = <0>;
- switch2: switch2@0 {
+ switch2: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 2>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_fc_1000_2";
phy-mode = "1000base-x";
@@ -206,7 +206,7 @@
sfp = <&sff1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_fc_1000_3";
phy-mode = "1000base-x";
@@ -214,7 +214,7 @@
sfp = <&sff2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_fc_1000_4";
phy-mode = "1000base-x";
@@ -222,7 +222,7 @@
sfp = <&sff3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_fc_1000_5";
phy-mode = "1000base-x";
@@ -230,7 +230,7 @@
sfp = <&sff4>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_fc_1000_6";
phy-mode = "1000base-x";
@@ -238,7 +238,7 @@
sfp = <&sff5>;
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "eth_fc_1000_7";
phy-mode = "1000base-x";
@@ -246,7 +246,7 @@
sfp = <&sff6>;
};
- port@9 {
+ ethernet-port@9 {
reg = <9>;
label = "eth_fc_1000_1";
phy-mode = "1000base-x";
@@ -254,7 +254,7 @@
sfp = <&sff0>;
};
- switch2port10: port@10 {
+ switch2port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "2500base-x";
@@ -276,17 +276,17 @@
#address-cells = <1>;
#size-cells = <0>;
- switch3: switch3@0 {
+ switch3: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 3>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_fc_1000_8";
phy-mode = "1000base-x";
@@ -294,7 +294,7 @@
sfp = <&sff7>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_fc_1000_9";
phy-mode = "1000base-x";
@@ -302,7 +302,7 @@
sfp = <&sff8>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_fc_1000_10";
phy-mode = "1000base-x";
@@ -310,7 +310,7 @@
sfp = <&sff9>;
};
- switch3port9: port@9 {
+ switch3port9: ethernet-port@9 {
reg = <9>;
label = "dsa";
phy-mode = "2500base-x";
@@ -322,7 +322,7 @@
};
};
- switch3port10: port@10 {
+ switch3port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
index 1461804eca..2a49046466 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
@@ -134,11 +134,11 @@
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
@@ -149,32 +149,32 @@
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_1000_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_1000_3";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_cu_1000_4";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_5";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_6";
};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
index 463c2452b9..078d8699e1 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
@@ -123,11 +123,11 @@
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
@@ -138,27 +138,27 @@
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_100_3";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_4";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_5";
};
- port@8 {
+ ethernet-port@8 {
reg = <8>;
label = "eth_cu_1000_1";
};
- port@9 {
+ ethernet-port@9 {
reg = <9>;
label = "eth_cu_1000_2";
phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
};
};
- mdio1 {
+ mdio-external {
compatible = "marvell,mv88e6xxx-mdio-external";
#address-cells = <1>;
#size-cells = <0>;
- phy9: phy9@0 {
+ phy9: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
pinctrl-0 = <&pinctrl_gpio_phy9>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
index f5ae0d5de3..22c8f44390 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
@@ -148,11 +148,11 @@
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
@@ -163,32 +163,32 @@
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_1000_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_1000_3";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_cu_1000_4";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_5";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_6";
};
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 3dfb1c8cef..9cc1e14e6c 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk07.1-c2.dtb \
qcom-ipq8064-ap148.dtb \
qcom-ipq8064-rb3011.dtb \
+ qcom-msm8226-microsoft-dempsey.dtb \
+ qcom-msm8226-microsoft-makepeace.dtb \
+ qcom-msm8226-microsoft-moneypenny.dtb \
qcom-msm8226-samsung-s3ve3g.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8916-samsung-e5.dtb \
qcom-msm8916-samsung-e7.dtb \
qcom-msm8916-samsung-grandmax.dtb \
qcom-msm8916-samsung-serranove.dtb \
+ qcom-msm8926-htc-memul.dtb \
+ qcom-msm8926-microsoft-superman-lte.dtb \
+ qcom-msm8926-microsoft-tesla.dtb \
+ qcom-msm8926-motorola-peregrine.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 0000000000..22f3c7bac5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+ pm8018: pmic {
+ compatible = "qcom,pm8018", "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8018-pwrkey",
+ "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8018_mpps: mpps@50 {
+ compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8018_mpps 0 0 6>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+ reg = <0x11d>;
+ interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+ allow-set-time;
+ };
+
+ pm8018_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8018_gpio 0 0 6>;
+ #gpio-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 0000000000..984b797779
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8058: pmic {
+ compatible = "qcom,pm8058";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8058_led48: led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ status = "disabled";
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+
+ pm8058_mpps: mpps@50 {
+ compatible = "qcom,pm8058-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8058_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pm8058_led131: led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ status = "disabled";
+ };
+
+ pm8058_led132: led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ status = "disabled";
+ };
+
+ pm8058_led133: led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ status = "disabled";
+ };
+
+ pm8058_keypad: keypad@148 {
+ compatible = "qcom,pm8058-keypad";
+ reg = <0x148>;
+ interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+ <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
+ #gpio-cells = <2>;
+ };
+
+ pm8058_xoadc: xoadc@197 {
+ compatible = "qcom,pm8058-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ ichg: adc-channel@3 {
+ reg = <0x00 0x03>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ ref_325mv: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+
+ rtc@1e8 {
+ compatible = "qcom,pm8058-rtc";
+ reg = <0x1e8>;
+ interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+ allow-set-time;
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+ <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
index 2413778f37..2fd4f135ed 100644
--- a/arch/arm/boot/dts/qcom/pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8226.dtsi
@@ -82,6 +82,8 @@
"usb-valid",
"dc-valid";
+ status = "disabled";
+
chg_otg: otg-vbus { };
};
diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi
new file mode 100644
index 0000000000..064e3ba54e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+ pm8821: pmic {
+ compatible = "qcom,pm8821";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8821_mpps 0 0 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 0000000000..058962af30
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8921: pmic {
+ compatible = "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8921_mpps: mpps@50 {
+ compatible = "qcom,pm8921-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8921_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ reg = <0x11d>;
+ interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+ allow-set-time;
+ };
+
+ pm8921_keypad: keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+ <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ status = "disabled";
+ };
+
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
+ };
+
+ pm8921_xoadc: xoadc@197 {
+ compatible = "qcom,pm8921-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ batt_therm: adc-channel@8 {
+ reg = <0x00 0x08>;
+ };
+
+ batt_id: adc-channel@9 {
+ reg = <0x00 0x09>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ chg_temp: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+ <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
index ed0ba591c7..aca0052a02 100644
--- a/arch/arm/boot/dts/qcom/pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8941.dtsi
@@ -99,6 +99,8 @@
usb-otg-in-supply = <&pm8941_5vs1>;
+ status = "disabled";
+
chg_otg: otg-vbus { };
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index a39f5a161b..a2ca456012 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -253,6 +253,8 @@
qcom,fast-charge-high-threshold-voltage = <4400000>;
qcom,auto-recharge-threshold-voltage = <4300000>;
qcom,minimum-input-voltage = <4400000>;
+
+ status = "okay";
};
&tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index 59b218042d..ac228965a4 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -335,6 +335,8 @@
qcom,fast-charge-current-limit = <300000>;
qcom,fast-charge-safe-current = <600000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
+
+ status = "okay";
};
&tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index feb78afef3..0a1fd5eb3c 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -292,6 +292,8 @@
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
qcom,minimum-input-voltage = <4450000>;
+
+ status = "okay";
};
&tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 94351c9bf9..009afd8212 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm APQ8060 Dragonboard";
@@ -272,6 +273,10 @@
};
};
+&pm8058 {
+ interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8058_gpio {
dragon_ethernet_gpios: ethernet-state {
pinconf {
@@ -447,6 +452,8 @@
* that means
*/
regulators-0 {
+ compatible = "qcom,rpm-pm8901-regulators";
+
vdd_l0-supply = <&pm8901_s4>;
vdd_l1-supply = <&vph>;
vdd_l2-supply = <&vph>;
@@ -464,57 +471,63 @@
lvs3_in-supply = <&pm8058_s2>;
mvs_in-supply = <&pm8058_s3>;
- l0 {
+ pm8901_l0: l0 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l1 {
+
+ pm8901_l1: l1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l2 {
+
+ pm8901_l2: l2 {
/* TMA340 requires strictly 3.3V */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l3 {
+
+ pm8901_l3: l3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+
+ pm8901_l4: l4 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l5 {
+
+ pm8901_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l6 {
+
+ pm8901_l6: l6 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
bias-pull-down;
};
/* s0 and s1 are SAW regulators controlled over SPM */
- s2 {
+ pm8901_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+ pm8901_s3: s3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s4 {
+ pm8901_s4: s4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <1600000>;
@@ -522,17 +535,22 @@
};
/* LVS0 thru 3 and mvs are just switches */
- lvs0 {
+ pm8901_lvs0: lvs0 {
regulator-always-on;
};
- lvs1 { };
- lvs2 { };
- lvs3 { };
- mvs { };
+ pm8901_lvs1: lvs1 { };
+
+ pm8901_lvs2: lvs2 { };
+
+ pm8901_lvs3: lvs3 { };
+
+ pm8901_mvs: mvs { };
};
regulators-1 {
+ compatible = "qcom,rpm-pm8058-regulators";
+
vdd_l0_l1_lvs-supply = <&pm8058_s3>;
vdd_l2_l11_l12-supply = <&vph>;
vdd_l3_l4_l5-supply = <&vph>;
@@ -554,144 +572,169 @@
vdd_s4-supply = <&vph>;
vdd_ncp-supply = <&vph>;
- l0 {
+ pm8058_l0: l0 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l1 {
+
+ pm8058_l1: l1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l2 {
+
+ pm8058_l2: l2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l3 {
+
+ pm8058_l3: l3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l4 {
+
+ pm8058_l4: l4 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l5 {
+
+ pm8058_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l6 {
+
+ pm8058_l6: l6 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3600000>;
bias-pull-down;
};
- l7 {
+
+ pm8058_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l8 {
+
+ pm8058_l8: l8 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3050000>;
bias-pull-down;
};
- l9 {
+
+ pm8058_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l10 {
+
+ pm8058_l10: l10 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l11 {
+
+ pm8058_l11: l11 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
bias-pull-down;
};
- l12 {
+
+ pm8058_l12: l12 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
- l13 {
+
+ pm8058_l13: l13 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
bias-pull-down;
};
- l14 {
+
+ pm8058_l14: l14 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- l15 {
+
+ pm8058_l15: l15 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l16 {
+
+ pm8058_l16: l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
regulator-always-on;
};
- l17 {
+
+ pm8058_l17: l17 {
// 1.5V according to schematic
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l18 {
+
+ pm8058_l18: l18 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
bias-pull-down;
};
- l19 {
+
+ pm8058_l19: l19 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
bias-pull-down;
};
- l20 {
+
+ pm8058_l20: l20 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l21 {
+
+ pm8058_l21: l21 {
// 1.1 V according to schematic
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
regulator-always-on;
};
- l22 {
+
+ pm8058_l22: l22 {
// 1.2 V according to schematic
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
- l23 {
+
+ pm8058_l23: l23 {
// Unused
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l24 {
+
+ pm8058_l24: l24 {
// Unused
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l25 {
+
+ pm8058_l25: l25 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- s0 {
+ pm8058_s0: s0 {
// regulator-min-microvolt = <500000>;
// regulator-max-microvolt = <1325000>;
regulator-min-microvolt = <1100000>;
@@ -699,7 +742,8 @@
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s1 {
+
+ pm8058_s1: s1 {
// regulator-min-microvolt = <500000>;
// regulator-max-microvolt = <1250000>;
regulator-min-microvolt = <1100000>;
@@ -707,21 +751,24 @@
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s2 {
+
+ pm8058_s2: s2 {
// 1.3 V according to schematic
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+
+ pm8058_s3: s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
regulator-always-on;
bias-pull-down;
};
- s4 {
+
+ pm8058_s4: s4 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
@@ -730,14 +777,15 @@
};
/* LVS0 and LVS1 are just switches */
- lvs0 {
+ pm8058_lvs0: lvs0 {
bias-pull-down;
};
- lvs1 {
+
+ pm8058_lvs1: lvs1 {
bias-pull-down;
};
- ncp {
+ pm8058_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
@@ -949,23 +997,27 @@
xoadc-ref-supply = <&pm8058_l18>;
/* Board-specific channels */
- mpp5@5 {
+ adc-channel@5 {
/* Connected to AOUT of ALS sensor */
reg = <0x00 0x05>;
};
- mpp6@6 {
+
+ adc-channel@6 {
/* Connected to test point TP43 */
reg = <0x00 0x06>;
};
- mpp7@7 {
+
+ adc-channel@7 {
/* Connected to battery thermistor */
reg = <0x00 0x07>;
};
- mpp8@8 {
+
+ adc-channel@8 {
/* Connected to battery ID detector */
reg = <0x00 0x08>;
};
- mpp9@9 {
+
+ adc-channel@9 {
/* Connected to XO thermistor */
reg = <0x00 0x09>;
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c0dd6399f5..d460743fbb 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Asus Nexus7(flo)";
compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -180,24 +184,26 @@
status = "okay";
};
-/* eMMC */
-&sdcc1 {
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- status = "okay";
-};
-
&mdp_dsi1_out {
remote-endpoint = <&dsi0_in>;
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
-
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vin_lvs2-supply = <&pm8921_s1>;
@@ -209,7 +215,7 @@
vdd_ncp-supply = <&pm8921_l6>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -218,7 +224,7 @@
};
/* msm otg HSUSB_VDDCX */
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
@@ -231,55 +237,58 @@
* tabla2x-slim-CDC_VDD_CP
* tabla2x-slim-VDDIO_CDC
*/
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
/* mipi_dsi.1-dsi1_pll_vdda */
- l2 {
+ pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* msm_otg-HSUSB_3p3 */
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
/* msm_otg-HSUSB_1p8 */
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/* msm_sdcc.1-sdc_vdd */
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-always-on;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
+ pm8921_l8: l8 {
+ };
+
/* mipi_dsi.1-dsi1_avdd */
- l11 {
+ pm8921_l11: l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
@@ -287,14 +296,14 @@
};
/* pwm_power for backlight */
- l17 {
+ pm8921_l17: l17 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
/* camera, qdsp6 */
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
@@ -304,37 +313,44 @@
* tabla2x-slim-CDC_VDDA_A_1P2V
* tabla2x-slim-VDDD_CDC_D
*/
- l25 {
+ pm8921_l25: l25 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
- lvs1 {
+ pm8921_lvs1: lvs1 {
bias-pull-down;
};
- lvs4 {
+ pm8921_lvs4: lvs4 {
bias-pull-down;
};
- lvs5 {
+ pm8921_lvs5: lvs5 {
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
/*
* mipi_dsi.1-dsi1_vddio
* pil_riva-pll_vdd
*/
- lvs7 {
+ pm8921_lvs7: lvs7 {
bias-pull-down;
};
};
};
+/* eMMC */
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+ status = "okay";
+};
+
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8add..671d58cc27 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -69,6 +72,14 @@
status = "okay";
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
@@ -82,6 +93,8 @@
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -93,9 +106,8 @@
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
-
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -103,52 +115,51 @@
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
-
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index b0c5e7bd5e..ed86b24119 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -170,6 +173,14 @@
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
@@ -192,6 +203,8 @@
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -203,9 +216,8 @@
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
-
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -213,59 +225,63 @@
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- lvs1 {
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
- lvs6 {
+ pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74..2412aa3e3e 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Sony Xperia Z";
compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -65,6 +68,14 @@
status = "okay";
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
@@ -82,11 +93,25 @@
&riva {
pinctrl-names = "default";
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
status = "okay";
+
+ iris {
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
};
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs_1_3_6-supply = <&pm8921_s4>;
vin_lvs_4_5_7-supply = <&pm8921_s4>;
@@ -98,7 +123,7 @@
vin_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -106,21 +131,21 @@
bias-pull-down;
};
- s2 {
+ pm8921_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
- s4 {
+ pm8921_s4: s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -129,205 +154,207 @@
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- s8 {
+ pm8921_s8: s8 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
/* PMOS LDO */
- l1 {
+ pm8921_l1: l1 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
bias-pull-down;
};
- l2 {
+ pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l7 {
+ pm8921_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l8 {
+ pm8921_l8: l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
- l9 {
+ pm8921_l9: l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l10 {
+ pm8921_l10: l10 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
- l11 {
+ pm8921_l11: l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l12 {
+ pm8921_l12: l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l14 {
+ pm8921_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l15 {
+ pm8921_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l16 {
+ pm8921_l16: l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
- l17 {
+ pm8921_l17: l17 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
- l18 {
+ pm8921_l18: l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l21 {
+ pm8921_l21: l21 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
- l22 {
+ pm8921_l22: l22 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l24 {
+ pm8921_l24: l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
- l25 {
+ pm8921_l25: l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
- l27 {
+ pm8921_l27: l27 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- l28 {
+ pm8921_l28: l28 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
- l29 {
+ pm8921_l29: l29 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
/* Low Voltage Switch */
- lvs1 {
+ pm8921_lvs1: lvs1 {
bias-pull-down;
};
- lvs2 {
+ pm8921_lvs2: lvs2 {
bias-pull-down;
};
- lvs3 {
+ pm8921_lvs3: lvs3 {
bias-pull-down;
};
- lvs4 {
+ pm8921_lvs4: lvs4 {
bias-pull-down;
};
- lvs5 {
+ pm8921_lvs5: lvs5 {
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
- lvs7 {
+ pm8921_lvs7: lvs7 {
bias-pull-down;
};
- usb-switch {};
+ pm8921_usb_switch: usb-switch {};
- hdmi-switch {};
+ pm8921_hdmi_switch: hdmi-switch {
+ bias-pull-down;
+ };
- ncp {
+ pm8921_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 099a16c34e..3faf57035d 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@
};
};
-
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Charger temperature */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -655,133 +638,16 @@
clock-names = "core";
};
- ssbi@c00000 {
+ ssbi2: ssbi@c00000 {
compatible = "qcom,ssbi";
reg = <0x00c00000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8821: pmic {
- compatible = "qcom,pm8821";
- interrupt-parent = <&tlmm_pinmux>;
- interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8821_mpps: mpps@50 {
- compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
- reg = <0x50>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8821_mpps 0 0 4>;
- };
- };
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pmicintc: pmic {
- compatible = "qcom,pm8921";
- interrupt-parent = <&tlmm_pinmux>;
- interrupts = <74 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8921_gpio: gpio@150 {
-
- compatible = "qcom,pm8921-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8921_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8921_mpps: mpps@50 {
- compatible = "qcom,pm8921-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8921_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
- interrupts = <39 1>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- xoadc: xoadc@197 {
- compatible = "qcom,pm8921-adc";
- reg = <0x197>;
- interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- batt_therm: adc-channel@8 {
- reg = <0x00 0x08>;
- };
- batt_id: adc-channel@9 {
- reg = <0x00 0x09>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- chg_temp: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
- };
};
qfprom: qfprom@700000 {
@@ -891,60 +757,6 @@
clocks = <&pxo_board>, <&cxo_board>;
clock-names = "pxo", "cxo";
};
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
-
- pm8921_s1: s1 {};
- pm8921_s2: s2 {};
- pm8921_s3: s3 {};
- pm8921_s4: s4 {};
- pm8921_s7: s7 {};
- pm8921_s8: s8 {};
-
- pm8921_l1: l1 {};
- pm8921_l2: l2 {};
- pm8921_l3: l3 {};
- pm8921_l4: l4 {};
- pm8921_l5: l5 {};
- pm8921_l6: l6 {};
- pm8921_l7: l7 {};
- pm8921_l8: l8 {};
- pm8921_l9: l9 {};
- pm8921_l10: l10 {};
- pm8921_l11: l11 {};
- pm8921_l12: l12 {};
- pm8921_l14: l14 {};
- pm8921_l15: l15 {};
- pm8921_l16: l16 {};
- pm8921_l17: l17 {};
- pm8921_l18: l18 {};
- pm8921_l21: l21 {};
- pm8921_l22: l22 {};
- pm8921_l23: l23 {};
- pm8921_l24: l24 {};
- pm8921_l25: l25 {};
- pm8921_l26: l26 {};
- pm8921_l27: l27 {};
- pm8921_l28: l28 {};
- pm8921_l29: l29 {};
-
- pm8921_lvs1: lvs1 {};
- pm8921_lvs2: lvs2 {};
- pm8921_lvs3: lvs3 {};
- pm8921_lvs4: lvs4 {};
- pm8921_lvs5: lvs5 {};
- pm8921_lvs6: lvs6 {};
- pm8921_lvs7: lvs7 {};
-
- pm8921_usb_switch: usb-switch {};
-
- pm8921_hdmi_switch: hdmi-switch {
- bias-pull-down;
- };
-
- pm8921_ncp: ncp {};
- };
};
usb1: usb@12500000 {
@@ -1472,7 +1284,7 @@
qcom,ncb = <3>;
};
- pcie: pci@1b500000 {
+ pcie: pcie@1b500000 {
compatible = "qcom,pcie-apq8064";
reg = <0x1b500000 0x1000>,
<0x1b502000 0x80>,
@@ -1623,10 +1435,6 @@
memory-region = <&wcnss_mem>;
- vddcx-supply = <&pm8921_s3>;
- vddmx-supply = <&pm8921_l24>;
- vddpx-supply = <&pm8921_s4>;
-
status = "disabled";
iris {
@@ -1634,11 +1442,6 @@
clocks = <&cxo_board>;
clock-names = "xo";
-
- vddxo-supply = <&pm8921_l4>;
- vddrfa-supply = <&pm8921_s2>;
- vddpa-supply = <&pm8921_l10>;
- vdddig-supply = <&pm8921_lvs2>;
};
smd-edge {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 950fa652f9..6fce011236 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -49,6 +49,33 @@
no-map;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_uart2 {
@@ -403,6 +430,10 @@
pinctrl-1 = <&sdc2_off>;
};
+&smbb {
+ status = "okay";
+};
+
&tlmm {
sdc1_on: sdc1-on-state {
clk-pins {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 468ebc40d2..374af6dd36 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
};
};
- pci@40000000 {
+ pcie@40000000 {
status = "okay";
perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cf..f989bd741c 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -224,7 +224,7 @@
};
sdhci: mmc@7824900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c>, <0x7824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,7 +417,7 @@
reg = <0x4ab000 0x4>;
};
- pcie0: pci@40000000 {
+ pcie0: pcie@40000000 {
compatible = "qcom,pcie-ipq4019";
reg = <0x40000000 0xf1d>,
<0x40000f20 0xa8>,
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6198f42f6a..6a7f4dd0f7 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -366,7 +366,7 @@
};
};
- qcom,ssbi@500000 {
+ ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
@@ -1076,7 +1076,7 @@
status = "disabled";
};
- pcie0: pci@1b500000 {
+ pcie0: pcie@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
0x1b502000 0x80
@@ -1127,7 +1127,7 @@
perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
};
- pcie1: pci@1b700000 {
+ pcie1: pcie@1b700000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b700000 0x1000
0x1b702000 0x80
@@ -1178,7 +1178,7 @@
perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
};
- pcie2: pci@1b900000 {
+ pcie2: pcie@1b900000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b900000 0x1000
0x1b902000 0x80
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdca14..e3b4b93c3d 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
* Author : Neil Armstrong <narmstrong@baylibre.com>
*/
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "MangOH Green with WP8548 Module";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f..0dd52cac0e 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
*/
#include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
/ {
model = "Sierra Wireless WP8548 Module";
@@ -76,6 +77,10 @@
};
};
+&pm8018 {
+ interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&pm8018_gpio {
usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
@@ -129,6 +134,142 @@
pinctrl-names = "default";
};
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8018-regulators";
+
+ vin_lvs1-supply = <&pm8018_s3>;
+
+ vdd_l7-supply = <&pm8018_s4>;
+ vdd_l8-supply = <&pm8018_s3>;
+ vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+ /* Buck SMPS */
+ pm8018_s1: s1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s2: s2 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s3: s3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s4: s4 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s5: s5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8018_l2: l2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l3: l3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l4: l4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8018_l5: l5 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8018_l8: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8018_l9: l9 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8018_l10: l10 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l11: l11 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l12: l12 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l13: l13 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8018_l14: l14 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8018_lvs1: lvs1 {
+ bias-pull-down;
+ };
+ };
+};
+
&sdcc1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c0a60bae70..34c60994d0 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -256,57 +256,10 @@
};
};
- qcom,ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8018: pmic {
- compatible = "qcom,pm8018", "qcom,pm8921";
- interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8018>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8018_mpps: mpps@50 {
- compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8018_mpps 0 0 6>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
- interrupt-parent = <&pm8018>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pm8018_gpio: gpio@150 {
- compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8018_gpio 0 0 6>;
- #gpio-cells = <2>;
- };
- };
};
sdcc1bam: dma-controller@12182000 {
@@ -383,140 +336,6 @@
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8018-regulators";
-
- vin_lvs1-supply = <&pm8018_s3>;
-
- vdd_l7-supply = <&pm8018_s4>;
- vdd_l8-supply = <&pm8018_s3>;
- vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
- /* Buck SMPS */
- pm8018_s1: s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1150000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s2: s2 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s3: s3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s4: s4 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2200000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s5: s5 {
- regulator-always-on;
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- /* PMOS LDO */
- pm8018_l2: l2 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- pm8018_l3: l3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- pm8018_l4: l4 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- pm8018_l5: l5 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- pm8018_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- pm8018_l7: l7 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- pm8018_l8: l8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- bias-pull-down;
- };
-
- pm8018_l9: l9 {
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1150000>;
- bias-pull-down;
- };
-
- pm8018_l10: l10 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l11: l11 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l12: l12 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l13: l13 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- pm8018_l14: l14 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- /* Low Voltage Switch */
- pm8018_lvs1: lvs1 {
- bias-pull-down;
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 0000000000..525d8c608b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* microSD */
+ display0 = &framebuffer;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ stdout-path = "display0";
+
+ framebuffer: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x3200000 0x800000>;
+ format = "a8r8g8b8";
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 4)>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ /*
+ * This device being a WP platform has a different
+ * memory layout than other Android based devices.
+ * This smem memory region is directly copied from
+ * the original UEFI firmware.
+ */
+ reserved-memory {
+ display_reserved: framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l15>;
+ vio-supply = <&pm8226_l6>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ /* These values were taken from the original firmware DSDT */
+ pm8226_s1: s1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio106", "gpio107", "gpio108";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ irq-pins {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ reset-pins {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 0000000000..2c664b5934
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+ model = "Microsoft Lumia 640";
+ compatible = "microsoft,dempsey", "qcom,msm8226";
+ chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 0000000000..731c5c3756
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+ model = "Microsoft Lumia 640 XL";
+ compatible = "microsoft,makepeace", "qcom,msm8226";
+ chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 0000000000..992b7115b5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+ model = "Nokia Lumia 630";
+ compatible = "microsoft,moneypenny", "qcom,msm8226";
+ chassis-type = "handset";
+};
+
+&framebuffer {
+ width = <480>;
+ height = <854>;
+ stride = <(480 * 4)>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 5cd03ea7b0..b492c95e5d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -875,8 +875,8 @@
offset = <0x65c>;
mode-bootloader = <0x77665500>;
- mode-normal = <0x77665501>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-recovery = <0x77665502>;
};
};
@@ -1006,6 +1006,46 @@
"ref";
};
};
+
+ gpu: adreno@fdb00000 {
+ compatible = "qcom,adreno-305.18", "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ clock-names = "core", "iface", "mem_iface";
+
+ sram = <&gmu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ status = "disabled";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-450000000 {
+ opp-hz = /bits/ 64 <450000000>;
+ };
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-19000000 {
+ opp-hz = /bits/ 64 <19000000>;
+ };
+ };
+ };
};
thermal-zones {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index be18f1be29..69fe651f56 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
@@ -35,30 +36,42 @@
};
&pm8058 {
- keypad@148 {
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_FN_F1)
- MATRIX_KEY(0, 1, KEY_UP)
- MATRIX_KEY(0, 2, KEY_LEFT)
- MATRIX_KEY(0, 3, KEY_VOLUMEUP)
- MATRIX_KEY(1, 0, KEY_FN_F2)
- MATRIX_KEY(1, 1, KEY_RIGHT)
- MATRIX_KEY(1, 2, KEY_DOWN)
- MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
- MATRIX_KEY(2, 3, KEY_ENTER)
- MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
- MATRIX_KEY(4, 1, KEY_UP)
- MATRIX_KEY(4, 2, KEY_LEFT)
- MATRIX_KEY(4, 3, KEY_HOME)
- MATRIX_KEY(4, 4, KEY_FN_F3)
- MATRIX_KEY(5, 0, KEY_CAMERA)
- MATRIX_KEY(5, 1, KEY_RIGHT)
- MATRIX_KEY(5, 2, KEY_DOWN)
- MATRIX_KEY(5, 3, KEY_BACK)
- MATRIX_KEY(5, 4, KEY_MENU)
- >;
- keypad,num-rows = <6>;
- keypad,num-columns = <5>;
+ interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_FN_F1)
+ MATRIX_KEY(0, 1, KEY_UP)
+ MATRIX_KEY(0, 2, KEY_LEFT)
+ MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(1, 0, KEY_FN_F2)
+ MATRIX_KEY(1, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 2, KEY_DOWN)
+ MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+ MATRIX_KEY(2, 3, KEY_ENTER)
+ MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(4, 1, KEY_UP)
+ MATRIX_KEY(4, 2, KEY_LEFT)
+ MATRIX_KEY(4, 3, KEY_HOME)
+ MATRIX_KEY(4, 4, KEY_FN_F3)
+ MATRIX_KEY(5, 0, KEY_CAMERA)
+ MATRIX_KEY(5, 1, KEY_RIGHT)
+ MATRIX_KEY(5, 2, KEY_DOWN)
+ MATRIX_KEY(5, 3, KEY_BACK)
+ MATRIX_KEY(5, 4, KEY_MENU)
+ >;
+ keypad,num-rows = <6>;
+ keypad,num-columns = <5>;
+};
+
+&rpm {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8901-regulators";
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8058-regulators";
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 9217ced108..a7c245b9c8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@
};
};
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
- <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
- <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
- <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -334,143 +318,10 @@
status = "disabled";
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8058: pmic {
- compatible = "qcom,pm8058";
- interrupt-parent = <&tlmm>;
- interrupts = <88 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8058_gpio: gpio@150 {
- compatible = "qcom,pm8058-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8058_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8058_mpps: mpps@50 {
- compatible = "qcom,pm8058-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8058_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8058-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8058_keypad: keypad@148 {
- compatible = "qcom,pm8058-keypad";
- reg = <0x148>;
- interrupt-parent = <&pm8058>;
- interrupts = <74 1>, <75 1>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- pm8058_xoadc: xoadc@197 {
- compatible = "qcom,pm8058-adc";
- reg = <0x197>;
- interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- ichg: adc-channel@3 {
- reg = <0x00 0x03>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- ref_325mv: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
-
- rtc@1e8 {
- compatible = "qcom,pm8058-rtc";
- reg = <0x1e8>;
- interrupt-parent = <&pm8058>;
- interrupts = <39 1>;
- allow-set-time;
- };
-
- vibrator@4a {
- compatible = "qcom,pm8058-vib";
- reg = <0x4a>;
- };
-
- pm8058_led48: led@48 {
- compatible = "qcom,pm8058-keypad-led";
- reg = <0x48>;
- status = "disabled";
- };
-
- pm8058_led131: led@131 {
- compatible = "qcom,pm8058-led";
- reg = <0x131>;
- status = "disabled";
- };
-
- pm8058_led132: led@132 {
- compatible = "qcom,pm8058-led";
- reg = <0x132>;
- status = "disabled";
- };
-
- pm8058_led133: led@133 {
- compatible = "qcom,pm8058-led";
- reg = <0x133>;
- status = "disabled";
- };
-
- };
};
l2cc: clock-controller@2082000 {
@@ -496,72 +347,6 @@
clocks = <&pxo_board>;
clock-names = "pxo";
};
-
- regulators-0 {
- compatible = "qcom,rpm-pm8901-regulators";
-
- pm8901_l0: l0 {};
- pm8901_l1: l1 {};
- pm8901_l2: l2 {};
- pm8901_l3: l3 {};
- pm8901_l4: l4 {};
- pm8901_l5: l5 {};
- pm8901_l6: l6 {};
-
- /* S0 and S1 Handled as SAW regulators by SPM */
- pm8901_s2: s2 {};
- pm8901_s3: s3 {};
- pm8901_s4: s4 {};
-
- pm8901_lvs0: lvs0 {};
- pm8901_lvs1: lvs1 {};
- pm8901_lvs2: lvs2 {};
- pm8901_lvs3: lvs3 {};
-
- pm8901_mvs: mvs {};
- };
-
- regulators-1 {
- compatible = "qcom,rpm-pm8058-regulators";
-
- pm8058_l0: l0 {};
- pm8058_l1: l1 {};
- pm8058_l2: l2 {};
- pm8058_l3: l3 {};
- pm8058_l4: l4 {};
- pm8058_l5: l5 {};
- pm8058_l6: l6 {};
- pm8058_l7: l7 {};
- pm8058_l8: l8 {};
- pm8058_l9: l9 {};
- pm8058_l10: l10 {};
- pm8058_l11: l11 {};
- pm8058_l12: l12 {};
- pm8058_l13: l13 {};
- pm8058_l14: l14 {};
- pm8058_l15: l15 {};
- pm8058_l16: l16 {};
- pm8058_l17: l17 {};
- pm8058_l18: l18 {};
- pm8058_l19: l19 {};
- pm8058_l20: l20 {};
- pm8058_l21: l21 {};
- pm8058_l22: l22 {};
- pm8058_l23: l23 {};
- pm8058_l24: l24 {};
- pm8058_l25: l25 {};
-
- pm8058_s0: s0 {};
- pm8058_s1: s1 {};
- pm8058_s2: s2 {};
- pm8058_s3: s3 {};
- pm8058_s4: s4 {};
-
- pm8058_lvs0: lvs0 {};
- pm8058_lvs1: lvs1 {};
-
- pm8058_ncp: ncp {};
- };
};
amba {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 0000000000..ed328b2433
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+ model = "HTC One Mini 2";
+ compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ unknown@5b00000 {
+ reg = <0x05b00000 0x200000>;
+ no-map;
+ };
+
+ unknown@7500000 {
+ reg = <0x07500000 0xb00000>;
+ no-map;
+ };
+
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x4f00000>;
+ no-map;
+ };
+
+ unknown@cf00000 {
+ reg = <0x0cf00000 0x200000>;
+ no-map;
+ };
+
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x3a000>;
+ no-map;
+ };
+
+ unknown@d13a000 {
+ reg = <0x0d13a000 0xc6000>;
+ no-map;
+ };
+
+ wcnss_region: wcnss@d200000 {
+ reg = <0x0d200000 0x650000>;
+ no-map;
+ };
+
+ unknown@d850000 {
+ reg = <0x0d850000 0x3b0000>;
+ no-map;
+ };
+
+ adsp_region: adsp@dc00000 {
+ reg = <0x0dc00000 0x1400000>;
+ no-map;
+ };
+
+ unknown@f000000 {
+ reg = <0x0f000000 0x500000>;
+ no-map;
+ };
+
+ venus_region: venus@f500000 {
+ reg = <0x0f500000 0x500000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ unknown@fb00000 {
+ reg = <0x0fb00000 0x1b00000>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/msm8926/memul/adsp.mbn";
+ status = "okay";
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0d>;
+ interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8226_l19>;
+ vid-supply = <&pm8226_l28>;
+ };
+
+ accelerometer@18 {
+ compatible = "bosch,bma250e";
+ reg = <0x18>;
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8226_l19>;
+ vddio-supply = <&pm8226_l28>;
+ };
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ /* TFA9887 @ 34 */
+ /* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l19>;
+
+ syna,startup-delay-ms = <160>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ /* NCP6924 Camera Regulators @ 10 */
+ /* PN544 NFC @ 28 */
+ /* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1750000>;
+ qcom,fast-charge-current-limit = <1750000>;
+ qcom,fast-charge-safe-voltage = <4360000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 0000000000..9b48661d69
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+ model = "Nokia Lumia 735";
+ compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ touchscreen: touchscreen@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l15>;
+ vio-supply = <&pm8226_l6>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c5 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 0000000000..53a6d4e859
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+ model = "Nokia Lumia 830";
+ compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+ status = "okay";
+
+ touchscreen: touchscreen@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l15>;
+ vio-supply = <&pm8226_l6>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c5 {
+ status = "disabled";
+};
+
+&gpio_keys {
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ key-camera-focus {
+ label = "Camera Focus";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 0000000000..0cbe2d2fbb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Motorola Moto G 4G (2013)";
+ compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer0: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ sensor@48 {
+ compatible = "ti,tmp108";
+ reg = <0x48>;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+
+ pm8226_lvs1: lvs1 {
+ /* Pull-up for I2C lines */
+ regulator-always-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <2000000>;
+ qcom,fast-charge-current-limit = <1900000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 6c1bc38188..36f4c997b0 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
@@ -88,17 +89,21 @@
};
};
-&pmicintc {
- keypad@148 {
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_VOLUMEUP)
- MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
- MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
- MATRIX_KEY(0, 3, KEY_CAMERA)
- >;
- keypad,num-rows = <1>;
- keypad,num-columns = <5>;
- };
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(0, 3, KEY_CAMERA)
+ >;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <5>;
+
+ status = "okay";
};
&rpm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c2874..1a5116336f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
/ {
model = "Samsung Galaxy Express SGH-I437";
@@ -84,6 +85,10 @@
};
};
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
&rpm {
regulators {
compatible = "qcom,rpm-pm8921-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index d13080fcbe..f420740e06 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
- };
};
acc0: clock-controller@2088000 {
@@ -259,49 +255,10 @@
};
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pmicintc: pmic {
- compatible = "qcom,pm8921";
- interrupt-parent = <&msmgpio>;
- interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- keypad@148 {
- compatible = "qcom,pm8921-keypad";
- reg = <0x148>;
- interrupt-parent = <&pmicintc>;
- interrupts = <74 IRQ_TYPE_EDGE_RISING>,
- <75 IRQ_TYPE_EDGE_RISING>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
- };
};
rng@1a500000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index da99f770d4..4aaae8537a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -60,6 +60,33 @@
enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
};
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
@@ -340,6 +367,7 @@
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
+ status = "okay";
};
&remoteproc_mss {
@@ -347,6 +375,7 @@
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
+ status = "okay";
};
&rpm_requests {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 23ae474698..d34659ebac 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -65,6 +65,33 @@
pmsg-size = <0x80000>;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
@@ -190,6 +217,7 @@
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
+ status = "okay";
};
&remoteproc_mss {
@@ -197,6 +225,7 @@
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
+ status = "okay";
};
&rpm_requests {
@@ -425,6 +454,8 @@
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
};
&tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index f41cc4b4b5..083ab780ab 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -346,6 +346,20 @@
reg = <0xf9011000 0x1000>;
};
+ saw_l2: power-controller@f9012000 {
+ compatible = "qcom,saw2";
+ reg = <0xf9012000 0x1000>;
+ regulator;
+ };
+
+ watchdog@f9017000 {
+ compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+ reg = <0xf9017000 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sleep_clk>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -405,52 +419,46 @@
};
};
- saw0: power-controller@f9089000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw1: power-controller@f9099000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw2: power-controller@f90a9000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw3: power-controller@f90b9000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw_l2: power-controller@f9012000 {
- compatible = "qcom,saw2";
- reg = <0xf9012000 0x1000>;
- regulator;
- };
-
acc0: power-manager@f9088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
};
+ saw0: power-controller@f9089000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+ };
+
acc1: power-manager@f9098000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
};
+ saw1: power-controller@f9099000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+ };
+
acc2: power-manager@f90a8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
};
+ saw2: power-controller@f90a9000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+ };
+
acc3: power-manager@f90b8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
+ saw3: power-controller@f90b9000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+ };
+
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -1063,6 +1071,15 @@
};
};
+ bimc: interconnect@fc380000 {
+ reg = <0xfc380000 0x6a000>;
+ compatible = "qcom,msm8974-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
@@ -1101,22 +1118,13 @@
};
};
- bimc: interconnect@fc380000 {
- reg = <0xfc380000 0x6a000>;
- compatible = "qcom,msm8974-bimc";
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
- };
-
snoc: interconnect@fc460000 {
reg = <0xfc460000 0x4000>;
compatible = "qcom,msm8974-snoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
pnoc: interconnect@fc468000 {
@@ -1125,7 +1133,7 @@
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
- <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
};
ocmemnoc: interconnect@fc470000 {
@@ -1134,7 +1142,7 @@
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
- <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
};
mmssnoc: interconnect@fc478000 {
@@ -1143,7 +1151,7 @@
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&mmcc MMSS_S0_AXI_CLK>,
- <&mmcc MMSS_S0_AXI_CLK>;
+ <&mmcc MMSS_S0_AXI_CLK>;
};
cnoc: interconnect@fc480000 {
@@ -1152,7 +1160,7 @@
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
tsens: thermal-sensor@fc4a9000 {
@@ -1633,13 +1641,6 @@
bias-pull-up;
drive-strength = <2>;
};
-
- cd-pins {
- pins = "gpio54";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- };
};
blsp1_uart2_default: blsp1-uart2-default-state {
@@ -2408,31 +2409,4 @@
<GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
-
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&boost_bypass_n_pin>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 6c4153689b..fe227fd3f9 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -57,6 +57,33 @@
enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
@@ -381,6 +408,8 @@
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
qcom,minimum-input-voltage = <4450000>;
+
+ status = "okay";
};
&tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index c0ca264d81..4c8edadea0 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -51,6 +51,33 @@
debounce-interval = <150>;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c1 {
@@ -433,6 +460,10 @@
status = "okay";
};
+&smbb {
+ status = "okay";
+};
+
&tlmm {
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio68";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 325feb89b3..b93539e2b8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -155,7 +155,15 @@
enable-active-high;
};
- /delete-node/ vreg-boost;
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
@@ -355,7 +363,6 @@
vddr-supply = <&vreg_panel>;
reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
- te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 0798cce3db..ee94741a26 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -84,6 +84,33 @@
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
};
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
@@ -297,6 +324,7 @@
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
+ status = "okay";
};
&remoteproc_mss {
@@ -304,6 +332,7 @@
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
+ status = "okay";
};
&rpm_requests {
@@ -558,6 +587,8 @@
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
};
&tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index fb6764b2dc..27429d0fed 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx55-qmp-usb3-uni-phy";
- reg = <0x00ff6000 0x1c0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00ff6000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- resets = <&gcc GCC_USB3PHY_PHY_BCR>,
- <&gcc GCC_USB3_PHY_BCR>;
- reset-names = "phy", "common";
-
- usb_ssphy: phy@ff6200 {
- reg = <0x00ff6200 0x170>,
- <0x00ff6400 0x200>,
- <0x00ff6800 0x800>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ status = "disabled";
};
mc_virt: interconnect@1100000 {
@@ -603,7 +598,7 @@
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_hsphy>, <&usb_ssphy>;
+ phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 27b7f50a18..40591a4da6 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdx65";
reg = <0x00100000 0x001f7400>;
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
- clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <&pcie_phy>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "bi_tcxo_ao",
+ "sleep_clk",
+ "pcie_pipe_clk",
+ "usb3_phy_wrapper_gcc_usb30_pipe_clk";
#power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -233,32 +241,27 @@
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
- reg = <0x00ff6000 0x1c8>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00ff6000 0x2000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_EN>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_BCR>,
- <&gcc GCC_USB3_PHY_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
status = "disabled";
- usb_ssphy: phy@ff6200 {
- reg = <0x00ff6e00 0x160>,
- <0x00ff7000 0x1ec>,
- <0x00ff6200 0x1e00>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
};
system_noc: interconnect@1620000 {
@@ -520,7 +523,7 @@
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_hsphy>, <&usb_ssphy>;
+ phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
index e10f99278c..de52218cea 100644
--- a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -27,6 +27,15 @@
};
};
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&can1 {
@@ -69,6 +78,12 @@
clocks = <&cec_clock>;
clock-names = "cec";
+ avdd-supply = <&reg_1p8v>;
+ dvdd-supply = <&reg_1p8v>;
+ pvdd-supply = <&reg_1p8v>;
+ dvdd-3v-supply = <&reg_3p3v>;
+ bgvdd-supply = <&reg_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
index d21e00e1f4..e1ac2c161e 100644
--- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
@@ -132,7 +132,7 @@
i2c-gpio,delay-us = <5>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
@@ -143,6 +143,18 @@
enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
};
+ panel {
+ compatible = "ampire,am-800480l1tmqw-t00h";
+ backlight = <&backlight>;
+ power-supply = <&reg_5p0v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdc0_rgb>;
+ };
+ };
+ };
+
sound {
compatible = "simple-audio-card";
@@ -228,10 +240,22 @@
};
};
-&pfc {
+&lcdc0 {
pinctrl-0 = <&lcd0_pins>;
pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pfc {
ether_pins: ether {
groups = "gether_mii", "gether_int";
function = "gether";
diff --git a/arch/arm/boot/dts/renesas/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi
index 1b2cf5fa32..55884ec701 100644
--- a/arch/arm/boot/dts/renesas/r8a7740.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi
@@ -398,6 +398,61 @@
status = "disabled";
};
+ lcdc0: lcd-controller@fe940000 {
+ compatible = "renesas,r8a7740-lcdc";
+ reg = <0xfe940000 0x4000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+ <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+ <&vou_clk>;
+ clock-names = "fck", "media", "lclk", "video";
+ power-domains = <&pd_a4lc>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lcdc0_rgb: endpoint {
+ };
+ };
+ };
+ };
+
+ lcdc1: lcd-controller@fe944000 {
+ compatible = "renesas,r8a7740-lcdc";
+ reg = <0xfe944000 0x4000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+ <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+ <&vou_clk>;
+ clock-names = "fck", "media", "lclk", "video";
+ power-domains = <&pd_a4lc>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lcdc1_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcdc1_hdmi: endpoint {
+ };
+ };
+ };
+ };
+
tmu0: timer@fff80000 {
compatible = "renesas,tmu-r8a7740", "renesas,tmu";
reg = <0xfff80000 0x2c>;
@@ -474,6 +529,16 @@
#clock-cells = <0>;
clock-frequency = <0>;
};
+ lcdlclk0_clk: lcdlclk0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ lcdlclk1_clk: lcdlclk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index b1f679da36..a0b5743980 100644
--- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -34,6 +34,15 @@
};
};
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&du {
@@ -81,6 +90,12 @@
clock-names = "cec";
pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ avdd-supply = <&reg_1p8v>;
+ dvdd-supply = <&reg_1p8v>;
+ pvdd-supply = <&reg_1p8v>;
+ dvdd-3v-supply = <&reg_3p3v>;
+ bgvdd-supply = <&reg_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
index c105932f64..24411044ef 100644
--- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
@@ -182,7 +182,7 @@
VDDIO-supply = <&reg_3p3v>;
};
- stmpe811@44 {
+ port-expander@44 {
compatible = "st,stmpe811";
reg = <0x44>;
interrupt-parent = <&gpio4>;
@@ -197,7 +197,7 @@
/* internal ADC reference */
st,ref-sel = <0>;
- stmpe_touchscreen {
+ touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
index 08ea149b1e..9b13e8d153 100644
--- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
@@ -52,10 +52,10 @@
states = <3300000 1>, <1800000 0>;
};
- keyboard-irq {
+ keypad-0 {
compatible = "gpio-keys";
- pinctrl-0 = <&keyboard_irq_pins>;
+ pinctrl-0 = <&keypad0_pins>;
pinctrl-names = "default";
interrupt-parent = <&gpio0>;
@@ -76,11 +76,11 @@
};
};
- keyboard-gpio {
+ keypad-1 {
compatible = "gpio-keys-polled";
poll-interval = <50>;
- pinctrl-0 = <&keyboard_gpio_pins>;
+ pinctrl-0 = <&keypad1_pins>;
pinctrl-names = "default";
key-3 {
@@ -193,7 +193,7 @@
};
&gpio0 {
- keyboard-irq-hog {
+ keypad0-hog {
gpio-hog;
gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
input;
@@ -215,6 +215,35 @@
};
&lbsc {
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x04000000>;
+ pinctrl-0 = <&flash_pins>;
+ pinctrl-names = "default";
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+
ethernet@18000000 {
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18000000 0x100>;
@@ -266,6 +295,11 @@
};
};
+ flash_pins: flash {
+ groups = "lbsc_cs0";
+ function = "lbsc";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_c";
function = "scif2";
@@ -286,11 +320,11 @@
function = "hspi0";
};
- keyboard_irq_pins: keyboard-irq {
+ keypad0_pins: keypad-0 {
pins = "GP_0_17", "GP_0_18";
bias-pull-up;
};
- keyboard_gpio_pins: keyboard-gpio {
+ keypad1_pins: keypad-1 {
pins = "GP_0_19", "GP_0_20";
bias-pull-up;
};
diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index b17a9f9307..8590981245 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -122,6 +122,15 @@
};
};
+ fixedregulator1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -303,7 +312,7 @@
*
* IIC0/I2C0 does not appear to support fallback to GPIO.
*/
- i2cexio0: i2c-10 {
+ i2cexio0: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
i2c-bus-name = "i2c-exio0";
@@ -316,7 +325,7 @@
* This is similar to the arangement described for i2cexio0 (above)
* with a fallback to GPIO also provided.
*/
- i2cexio1: i2c-11 {
+ i2cexio1: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-exio1";
@@ -328,7 +337,7 @@
* IIC2 and I2C2 may be switched using pinmux.
* A fallback to GPIO is also provided.
*/
- i2chdmi: i2c-12 {
+ i2chdmi: i2c-mux3 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -361,6 +370,12 @@
clocks = <&cec_clock>;
clock-names = "cec";
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
@@ -417,7 +432,7 @@
* IIC3 and I2C3 may be switched using pinmux.
* IIC3/I2C3 does not appear to support fallback to GPIO.
*/
- i2cpwr: i2c-13 {
+ i2cpwr: i2c-mux4 {
compatible = "i2c-demux-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins>;
diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index 25956661a8..683f7395fa 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -44,6 +44,15 @@
};
};
+ fixedregulator1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -296,6 +305,12 @@
clocks = <&osc4_clk>;
clock-names = "cec";
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index ec01cc8595..0efd9f98c7 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -174,6 +174,24 @@
};
};
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -340,7 +358,7 @@
* I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio1: i2c-12 {
+ i2cexio1: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-exio1";
@@ -351,7 +369,7 @@
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-13 {
+ i2chdmi: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -384,6 +402,12 @@
clocks = <&cec_clock>;
clock-names = "cec";
+ avdd-supply = <&reg_1p8v>;
+ dvdd-supply = <&reg_1p8v>;
+ pvdd-supply = <&reg_1p8v>;
+ dvdd-3v-supply = <&reg_3p3v>;
+ bgvdd-supply = <&reg_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
@@ -446,7 +470,7 @@
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-14 {
+ i2cexio4: i2c-mux3 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index fcc9a2313e..93c86e9216 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -47,6 +47,24 @@
reg = <2 0x00000000 0 0x40000000>;
};
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -148,7 +166,7 @@
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-10 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -179,6 +197,12 @@
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&reg_1p8v>;
+ dvdd-supply = <&reg_1p8v>;
+ pvdd-supply = <&reg_1p8v>;
+ dvdd-3v-supply = <&reg_3p3v>;
+ bgvdd-supply = <&reg_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index af16f25184..540a9ad28f 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -30,6 +30,15 @@
reg = <0 0x40000000 0 0x40000000>;
};
+ d1_8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3_3v: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
@@ -182,6 +191,35 @@
};
&lbsc {
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0x00000000 0x04000000>;
+ pinctrl-0 = <&flash_pins>;
+ pinctrl-names = "default";
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+
ethernet@18000000 {
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18000000 0x100>;
@@ -240,6 +278,11 @@
function = "du1";
};
+ flash_pins: flash {
+ groups = "lbsc_cs0";
+ function = "lbsc";
+ };
+
keyboard_pins: keyboard {
pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
bias-pull-up;
@@ -296,6 +339,12 @@
interrupt-parent = <&irqc>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
index f87e78fe3f..000f21a2a8 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
@@ -29,6 +29,15 @@
reg = <0 0x40000000 0 0x40000000>;
};
+ d1_8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3_3v: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
@@ -254,6 +263,12 @@
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
reg-names = "main", "edid", "cec", "packet";
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
@@ -283,6 +298,12 @@
reg = <0x39>, <0x49>, <0x29>, <0x59>;
reg-names = "main", "edid", "cec", "packet";
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 9358fc7d0e..1ea6c75789 100644
--- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -165,6 +165,24 @@
};
};
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -324,7 +342,7 @@
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-11 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
@@ -368,6 +386,12 @@
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&reg_1p8v>;
+ dvdd-supply = <&reg_1p8v>;
+ pvdd-supply = <&reg_1p8v>;
+ dvdd-3v-supply = <&reg_3p3v>;
+ bgvdd-supply = <&reg_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
@@ -430,7 +454,7 @@
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-12 {
+ i2cexio4: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 73ec4d3541..b5ecafbb2e 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -192,7 +192,7 @@
/*
* A fallback to GPIO is provided for I2C1.
*/
- i2chdmi: i2c-11 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
@@ -222,7 +222,7 @@
* I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-14 {
+ i2cexio4: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b825f2e25d..595e074085 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -102,6 +102,15 @@
};
};
+ d1_8v: regulator-d1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3_3v: regulator-d3-3v {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
@@ -225,7 +234,7 @@
/*
* A fallback to GPIO is provided for I2C1.
*/
- i2chdmi: i2c-10 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
@@ -256,6 +265,12 @@
interrupt-parent = <&gpio5>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 0fa565a1c3..fa63e1afc4 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -437,7 +437,7 @@
};
can0: can@52104000 {
- compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+ compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
reg = <0x52104000 0x800>;
reg-io-width = <4>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index 0f46e18fe2..ab4cd9aab7 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -2,7 +2,9 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb \
+ rv1109-sonoff-ihost.dtb \
rv1126-edgeble-neu2-io.dtb \
+ rv1126-sonoff-ihost.dtb \
rk3036-evb.dtb \
rk3036-kylin.dtb \
rk3066a-bqcurie2.dtb \
@@ -10,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-mk808.dtb \
rk3066a-rayeager.dtb \
rk3128-evb.dtb \
+ rk3128-xpi-3128.dtb \
rk3188-bqedison2qc.dtb \
rk3188-px3-evb.dtb \
rk3188-radxarock.dtb \
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 67e1e04139..e32c73d32f 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -8,11 +8,26 @@
model = "Rockchip RK3036 KylinBoard";
compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x20000000>;
};
+ hdmi_con: hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds: gpio-leds {
compatible = "gpio-leds";
@@ -110,6 +125,12 @@
status = "okay";
};
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index c420c7c642..04af224005 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -17,6 +17,9 @@
interrupt-parent = <&gic>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -282,7 +285,6 @@
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- rockchip,default-sample-phase = <158>;
disable-wp;
dmas = <&pdma 12>;
dma-names = "rx-tx";
diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
index de9915d946..30139f21de 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
@@ -13,6 +13,11 @@
/ {
compatible = "rockchip,rk3066a";
+ aliases {
+ gpio4 = &gpio4;
+ gpio6 = &gpio6;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497c..c7ab7fcdb4 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,11 +12,6 @@
compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- i2c1 = &i2c1;
mmc0 = &emmc;
};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
new file mode 100644
index 0000000000..03a9788151
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+ model = "Geniatech XPI-3128";
+ compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <3300000>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ dc_5v: dc-5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /*
+ * This is a vbus-supply, which also supplies the GL852G usb hub,
+ * thus has to be always-on
+ */
+ host_pwr_5v: host-pwr-5v-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <1500>;
+ regulator-name = "HOST_PWR_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_5v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_drv>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power {
+ gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_led>;
+ };
+
+ led-spd {
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ /*
+ * currently not allowed to be set as per
+ * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+ * and needs to set in userspace:
+ *
+ * linux,default-trigger = "netdev";
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&spd_led>;
+ };
+ };
+
+ mcu3v3: mcu3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "MCU3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_ddr: vcc-ddr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_io: vcc-io-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_lan: vcc-lan-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_LAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: vcc-sd-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <500>;
+ regulator-name = "VCC_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_5v>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc33_hdmi: vcc33-hdmi-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC33_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcca_33>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcca_33: vcca-33-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCA_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_11: vdd-11-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd11_hdmi: vdd11-hdmi-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD11_HDMI";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vdd_11>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_arm: vdd-arm-regulator {
+ compatible = "pwm-regulator";
+ regulator-name = "VDD_ARM";
+ pwms = <&pwm1 0 25000 1>;
+ pwm-supply = <&vcc_sys>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /*
+ * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+ * Since there are HW blocks in PD_LOGIC (which are all driven by
+ * this supply), that either do not have a driver at all or the
+ * driver does not implement regulator support we have to make
+ * sure here that the voltage never drops below 1050 mV.
+ */
+ vdd_log: vdd-log-regulator {
+ compatible = "pwm-regulator";
+ regulator-name = "VDD_LOG";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-dutycycle-range = <30 100>;
+ pwm-supply = <&vcc_sys>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <4000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ vmmc-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates= <50000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names = /* GPIO0 A0-A7 */
+ "", "", "HEADER_5", "HEADER_3",
+ "", "", "", "",
+ /* GPIO0 B0-B7 */
+ "HEADER_22", "HEADER_23", "", "HEADER_19",
+ "HEADER_26", "HEADER_21", "HEADER_24", "",
+ /* GPIO0 C0-C7 */
+ "", "HEADER_18", "", "",
+ "", "", "", "",
+ /* GPIO0 D0-D7 */
+ "HEADER_36", "", "", "",
+ "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+ gpio-line-names = /* GPIO1 A0-A7 */
+ "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+ "HEADER_40", "HEADER_38", "", "",
+ /* GPIO1 B0-B7 */
+ "HEADER_11", "", "", "HEADER_29",
+ "HEADER_31", "", "", "",
+ /* GPIO1 C0-C7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO1 D0-D7 */
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names = /* GPIO2 A0-A7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO2 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO2 C0-C7 */
+ "", "", "", "",
+ "HEADER_27", "", "", "",
+ /* GPIO2 D0-D7 */
+ "", "", "HEADER_8", "HEADER_10",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = /* GPIO3 A0-A7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO3 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO3 C0-C7 */
+ "", "HEADER_32", "", "",
+ "", "", "", "HEADER_12",
+ /* GPIO3 D0-D7 */
+ "", "", "", "HEADER_15",
+ "", "", "", "";
+};
+
+&gpu {
+ mali-supply = <&vdd_log>;
+ status = "okay";
+};
+
+&mdio {
+ phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ max-speed = <100>;
+ /* T2.2.4 min. 1 us */
+ reset-assert-us = <10>;
+ /* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+ reset-deassert-us = <20>;
+ reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp83848c_rst>;
+ };
+};
+
+&pinctrl {
+ dp83848c {
+ dp83848c_rst: dp83848c-rst {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir-receiver {
+ ir_int: ir-int {
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ power_led: power-led {
+ rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ spd_led: spd-led {
+ rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ host_drv: host-drv {
+ rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ vmmc-supply = <&vcc_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ vusb_a-supply = <&vcc_io>;
+ vusb_d-supply = <&vdd_11>;
+ status = "okay";
+};
+
+&usb2phy {
+ status = "okay";
+};
+
+&usb2phy_host {
+ status = "okay";
+};
+
+&usb2phy_otg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 01edf244dd..e2264c40b9 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
/ {
compatible = "rockchip,rk3128";
@@ -15,6 +16,20 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,6 +115,27 @@
};
};
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <975000 975000 1250000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1050000 1050000 1250000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1150000 1150000 1250000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1250000 1250000 1250000>;
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
@@ -130,9 +166,119 @@
};
};
+ gpu: gpu@10090000 {
+ compatible = "rockchip,rk3128-mali", "arm,mali-400";
+ reg = <0x10090000 0x10000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1";
+ clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ resets = <&cru SRST_GPU>;
+ power-domains = <&power RK3128_PD_GPU>;
+ status = "disabled";
+ };
+
pmu: syscon@100a0000 {
compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
reg = <0x100a0000 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3128-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3128_PD_VIO {
+ reg = <RK3128_PD_VIO>;
+ clocks = <&cru ACLK_CIF>,
+ <&cru HCLK_CIF>,
+ <&cru DCLK_EBC>,
+ <&cru HCLK_EBC>,
+ <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>,
+ <&cru ACLK_LCDC0>,
+ <&cru HCLK_LCDC0>,
+ <&cru PCLK_MIPI>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>,
+ <&cru ACLK_VIO0>,
+ <&cru ACLK_VIO1>,
+ <&cru HCLK_VIO>,
+ <&cru HCLK_VIO_H2P>,
+ <&cru DCLK_VOP>,
+ <&cru SCLK_VOP>;
+ pm_qos = <&qos_ebc>,
+ <&qos_iep>,
+ <&qos_lcdc>,
+ <&qos_rga>,
+ <&qos_vip>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3128_PD_VIDEO {
+ reg = <RK3128_PD_VIDEO>;
+ clocks = <&cru ACLK_VDPU>,
+ <&cru HCLK_VDPU>,
+ <&cru ACLK_VEPU>,
+ <&cru HCLK_VEPU>,
+ <&cru SCLK_HEVC_CORE>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3128_PD_GPU {
+ reg = <RK3128_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ qos_gpu: qos@1012d000 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012d000 0x20>;
+ };
+
+ qos_vpu: qos@1012e000 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012e000 0x20>;
+ };
+
+ qos_rga: qos@1012f000 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f000 0x20>;
+ };
+
+ qos_ebc: qos@1012f080 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f080 0x20>;
+ };
+
+ qos_iep: qos@1012f100 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f100 0x20>;
+ };
+
+ qos_lcdc: qos@1012f180 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f180 0x20>;
+ };
+
+ qos_vip: qos@1012f200 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f200 0x20>;
};
gic: interrupt-controller@10139000 {
@@ -154,6 +300,9 @@
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
phys = <&usb2phy_otg>;
phy-names = "usb2-phy";
status = "disabled";
@@ -163,6 +312,7 @@
compatible = "generic-ehci";
reg = <0x101c0000 0x20000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST2>;
phys = <&usb2phy_host>;
phy-names = "usb";
status = "disabled";
@@ -172,6 +322,7 @@
compatible = "generic-ohci";
reg = <0x101e0000 0x20000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST2>;
phys = <&usb2phy_host>;
phy-names = "usb";
status = "disabled";
@@ -261,6 +412,8 @@
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
clock-output-names = "usb480m_phy";
+ assigned-clocks = <&cru SCLK_USB480M>;
+ assigned-clock-parents = <&usb2phy>;
#clock-cells = <0>;
status = "disabled";
@@ -518,6 +671,34 @@
#dma-cells = <1>;
};
+ gmac: ethernet@2008c000 {
+ compatible = "rockchip,rk3128-gmac";
+ reg = <0x2008c000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ resets = <&cru SRST_GMAC>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <2048>;
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3128-pinctrl";
rockchip,grf = <&grf>;
@@ -843,6 +1024,10 @@
rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
};
+ sdmmc_det: sdmmc-det {
+ rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+ };
+
sdmmc_wp: sdmmc-wp {
rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
};
diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index a721744cbf..96421355c2 100644
--- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -15,6 +15,10 @@
interrupt-parent = <&gic>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -732,14 +736,20 @@
status = "disabled";
ports {
- hdmi_in: port {
- #address-cells = <1>;
- #size-cells = <0>;
- hdmi_in_vop: endpoint@0 {
- reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_vop: endpoint {
remote-endpoint = <&vop_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index cb9cdaddff..3f1d640afa 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -19,6 +19,15 @@
aliases {
ethernet0 = &gmac;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
+ gpio8 = &gpio8;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -1231,27 +1240,37 @@
compatible = "rockchip,rk3288-dw-hdmi";
reg = <0x0 0xff980000 0x0 0x20000>;
reg-io-width = <4>;
- #sound-dai-cells = <0>;
- rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
clock-names = "iahb", "isfr", "cec";
power-domains = <&power RK3288_PD_VIO>;
+ rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
status = "disabled";
ports {
- hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
+
hdmi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_hdmi>;
};
+
hdmi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_hdmi>;
};
};
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
index cb4e42ede5..f37137f298 100644
--- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
@@ -16,6 +16,10 @@
aliases {
ethernet0 = &emac;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
diff --git a/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
new file mode 100644
index 0000000000..45dced8087
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+ model = "Sonoff iHost 2G";
+ compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1109.dtsi b/arch/arm/boot/dts/rockchip/rv1109.dtsi
new file mode 100644
index 0000000000..9cbaa08ab1
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+ compatible = "rockchip,rv1109";
+
+ cpus {
+ /delete-node/ cpu@f02;
+ /delete-node/ cpu@f03;
+ };
+
+ arm-pmu {
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
index f09be84059..0c2396b8f8 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
+++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
@@ -61,7 +61,7 @@
phy-mode = "rgmii";
phy-supply = <&vcc_3v3>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+ pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
tx_delay = <0x2a>;
rx_delay = <0x1a>;
status = "okay";
diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
index bb34b0c9cb..06b1d7f2d8 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
@@ -87,6 +87,16 @@
<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
};
};
+ i2c2 {
+ /omit-if-no-ref/
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ /* i2c2_scl */
+ <0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+ /* i2c2_sda */
+ <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+ };
+ };
pwm2 {
/omit-if-no-ref/
pwm2m0_pins: pwm2m0-pins {
@@ -105,36 +115,56 @@
};
rgmii {
/omit-if-no-ref/
- rgmiim1_pins: rgmiim1-pins {
+ rgmiim1_miim: rgmiim1-miim {
rockchip,pins =
/* rgmii_mdc_m1 */
<2 RK_PC2 2 &pcfg_pull_none>,
/* rgmii_mdio_m1 */
- <2 RK_PC1 2 &pcfg_pull_none>,
- /* rgmii_rxclk_m1 */
- <2 RK_PD3 2 &pcfg_pull_none>,
+ <2 RK_PC1 2 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_rxer: rgmiim1-rxer {
+ rockchip,pins =
+ /* rgmii_rxer_m1 */
+ <2 RK_PC0 2 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_bus2: rgmiim1-bus2 {
+ rockchip,pins =
/* rgmii_rxd0_m1 */
<2 RK_PB5 2 &pcfg_pull_none>,
/* rgmii_rxd1_m1 */
<2 RK_PB6 2 &pcfg_pull_none>,
- /* rgmii_rxd2_m1 */
- <2 RK_PC7 2 &pcfg_pull_none>,
- /* rgmii_rxd3_m1 */
- <2 RK_PD0 2 &pcfg_pull_none>,
/* rgmii_rxdv_m1 */
<2 RK_PB4 2 &pcfg_pull_none>,
- /* rgmii_txclk_m1 */
- <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd0_m1 */
<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd1_m1 */
<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+ /* rgmii_txen_m1 */
+ <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_bus4: rgmiim1-bus4 {
+ rockchip,pins =
+ /* rgmii_rxclk_m1 */
+ <2 RK_PD3 2 &pcfg_pull_none>,
+ /* rgmii_rxd2_m1 */
+ <2 RK_PC7 2 &pcfg_pull_none>,
+ /* rgmii_rxd3_m1 */
+ <2 RK_PD0 2 &pcfg_pull_none>,
+ /* rgmii_txclk_m1 */
+ <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd2_m1 */
<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd3_m1 */
- <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
- /* rgmii_txen_m1 */
- <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+ <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_mclkinout: rgmiim1-mclkinout {
+ rockchip,pins =
+ /* rgmii_clk_m1 */
+ <2 RK_PB7 2 &pcfg_pull_none>;
};
};
sdmmc0 {
@@ -263,6 +293,14 @@
/* uart3_tx_m0 */
<3 RK_PC6 4 &pcfg_pull_up>;
};
+ /omit-if-no-ref/
+ uart3m2_xfer: uart3m2-xfer {
+ rockchip,pins =
+ /* uart3_rx_m2 */
+ <3 RK_PA1 4 &pcfg_pull_up>,
+ /* uart3_tx_m2 */
+ <3 RK_PA0 4 &pcfg_pull_up>;
+ };
};
uart4 {
/omit-if-no-ref/
@@ -273,6 +311,14 @@
/* uart4_tx_m0 */
<3 RK_PA4 4 &pcfg_pull_up>;
};
+ /omit-if-no-ref/
+ uart4m2_xfer: uart4m2-xfer {
+ rockchip,pins =
+ /* uart4_rx_m2 */
+ <1 RK_PD4 3 &pcfg_pull_up>,
+ /* uart4_tx_m2 */
+ <1 RK_PD5 3 &pcfg_pull_up>;
+ };
};
uart5 {
/omit-if-no-ref/
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
new file mode 100644
index 0000000000..77386a48d8
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+ model = "Sonoff iHost 4G";
+ compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
new file mode 100644
index 0000000000..32b329e87a
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ sdio_pwrseq: pwrseq-sdio {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_npu_vepu: DCDC_REG1 {
+ regulator-name = "vdd_npu_vepu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-name = "vcc_buck5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcc_0v8: LDO_REG1 {
+ regulator-name = "vcc_0v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG2 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd0v8_pmu: LDO_REG3 {
+ regulator-name = "vcc0v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <800000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_dovdd: LDO_REG5 {
+ regulator-name = "vcc_dovdd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_dvdd: LDO_REG6 {
+ regulator-name = "vcc_dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_avdd: LDO_REG7 {
+ regulator-name = "vcc_avdd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: LDO_REG9 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0: SWITCH_REG1 {
+ regulator-name = "vcc_5v0";
+ };
+
+ vcc_3v3: SWITCH_REG2 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&gmac {
+ assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+ <&cru CLK_GMAC_TX_RX>;
+ assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+ <&cru RMII_MODE_CLK>;
+ assigned-clock-rates = <0>, <50000000>;
+ clock_in_out = "output";
+ phy-handle = <&phy>;
+ phy-mode = "rmii";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+ status = "okay";
+};
+
+&mdio {
+ phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_phy_rst>;
+ reset-active-low;
+ reset-assert-us = <50000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ eth_phy_rst: eth-phy-rst {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+ bt {
+ bt_enable: bt-enable {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_dev: bt-wake-dev {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio0-supply = <&vcc1v8_pmu>;
+ pmuio1-supply = <&vcc3v3_sys>;
+ vccio1-supply = <&vcc_1v8>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_1v8>;
+ vccio4-supply = <&vcc_dovdd>;
+ vccio5-supply = <&vcc_1v8>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_dovdd>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <100000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+ enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+ host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+ max-speed = <2000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m2_xfer>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4m2_xfer>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi
index 9ccd1bad62..bb603cae13 100644
--- a/arch/arm/boot/dts/rockchip/rv1126.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi
@@ -21,6 +21,13 @@
aliases {
i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
};
cpus {
@@ -231,6 +238,20 @@
status = "disabled";
};
+ i2c2: i2c@ff400000 {
+ compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+ reg = <0xff400000 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,grf = <&pmugrf>;
+ clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart1: serial@ff410000 {
compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
reg = <0xff410000 0x100>;
diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index a076a1dfe4..0d8495792a 100644
--- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -184,6 +184,28 @@
};
};
+ i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+
+ touchscreen@20 {
+ compatible = "cypress,aries-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&gpl0>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&vtouchled_reg>;
+ vcc-supply = <&vtouch_reg>;
+ linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+ };
+ };
+
spi-3 {
compatible = "spi-gpio";
#address-cells = <1>;
@@ -380,6 +402,23 @@
vusb_a-supply = <&vusbdac_reg>;
};
+&i2c_1 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+
+ lis3dh: accelerometer@19 {
+ compatible = "st,lis3dh-accel";
+ reg = <0x19>;
+
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
&i2c_3 {
status = "okay";
@@ -513,7 +552,6 @@
regulator-name = "TOUCH_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
};
vpll_reg: LDO10 {
diff --git a/arch/arm/boot/dts/samsung/exynos4x12.dtsi b/arch/arm/boot/dts/samsung/exynos4x12.dtsi
index 83d9d0a0a6..b4b5e76914 100644
--- a/arch/arm/boot/dts/samsung/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4x12.dtsi
@@ -517,15 +517,12 @@
iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
<&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
iommu-names = "isp", "drc", "fd", "mcuctl";
+ samsung,pmu-syscon = <&pmu_system_controller>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
- pmu@10020000 {
- reg = <0x10020000 0x3000>;
- };
-
i2c1_isp: i2c-isp@940000 {
compatible = "samsung,exynos4212-i2c-isp";
reg = <0x00940000 0x100>;
diff --git a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
index d5d88771ef..0f87abeddc 100644
--- a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
@@ -425,7 +425,7 @@
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8012e000 0x80>;
+ reg = <0x8012e000 0x80>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -440,7 +440,7 @@
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8012e080 0x80>;
+ reg = <0x8012e080 0x80>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -455,7 +455,7 @@
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e000 0x80>;
+ reg = <0x8000e000 0x80>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -470,7 +470,7 @@
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e080 0x80>;
+ reg = <0x8000e080 0x80>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -485,7 +485,7 @@
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e100 0x80>;
+ reg = <0x8000e100 0x80>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -500,7 +500,7 @@
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e180 0x80>;
+ reg = <0x8000e180 0x80>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -515,7 +515,7 @@
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8011e000 0x80>;
+ reg = <0x8011e000 0x80>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -530,7 +530,7 @@
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8011e080 0x80>;
+ reg = <0x8011e080 0x80>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -545,7 +545,7 @@
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0xa03fe000 0x80>;
+ reg = <0xa03fe000 0x80>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
index e1de9d389a..5eeb44c5e9 100644
--- a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
@@ -9,6 +9,54 @@
soc {
prcmu@80157000 {
ab8500 {
+ phy {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ regulator {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+
gpio {
/* Hog a few default settings */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-href-ab8505.dtsi b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
new file mode 100644
index 0000000000..268db68ccf
--- /dev/null
+++ b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+ soc {
+ prcmu@80157000 {
+ ab8505 {
+ phy {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ regulator {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+
+ gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_mode>,
+ <&gpio4_default_mode>,
+ <&gpio10_default_mode>,
+ <&gpio11_default_mode>,
+ <&gpio12_default_mode>,
+ <&gpio13_default_mode>,
+ <&gpio16_default_mode>,
+ <&gpio24_default_mode>,
+ <&gpio25_default_mode>,
+ <&gpio36_default_mode>,
+ <&gpio37_default_mode>,
+ <&gpio38_default_mode>,
+ <&gpio39_default_mode>,
+ <&gpio42_default_mode>,
+ <&gpio26_default_mode>,
+ <&gpio35_default_mode>,
+ <&ycbcr_default_mode>,
+ <&pwm_default_mode>,
+ <&adi1_default_mode>,
+ <&usbuicc_default_mode>,
+ <&dmic_default_mode>,
+ <&extcpena_default_mode>,
+ <&modsclsda_default_mode>;
+
+ /*
+ * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+ * are muxed in as GPIO, and configured as INPUT PULL DOWN
+ */
+ gpio2 {
+ gpio2_default_mode: gpio2_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio2_a_1";
+ };
+ default_cfg {
+ pins = "GPIO2_T9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio4 {
+ gpio4_default_mode: gpio4_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio4_a_1";
+ };
+ default_cfg {
+ pins = "GPIO4_W2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio10 {
+ gpio10_default_mode: gpio10_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio10_d_1";
+ };
+ default_cfg {
+ pins = "GPIO10_U17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio11 {
+ gpio11_default_mode: gpio11_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio11_d_1";
+ };
+ default_cfg {
+ pins = "GPIO11_AA18";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio12 {
+ gpio12_default_mode: gpio12_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio12_d_1";
+ };
+ default_cfg {
+ pins = "GPIO12_U16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio13 {
+ gpio13_default_mode: gpio13_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio13_d_1";
+ };
+ default_cfg {
+ pins = "GPIO13_W17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio16 {
+ gpio16_default_mode: gpio16_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio16_a_1";
+ };
+ default_cfg {
+ pins = "GPIO16_F15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio24 {
+ gpio24_default_mode: gpio24_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio24_a_1";
+ };
+ default_cfg {
+ pins = "GPIO24_T14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio25 {
+ gpio25_default_mode: gpio25_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio25_a_1";
+ };
+ default_cfg {
+ pins = "GPIO25_R16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio36 {
+ gpio36_default_mode: gpio36_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio36_a_1";
+ };
+ default_cfg {
+ pins = "GPIO36_A17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio37 {
+ gpio37_default_mode: gpio37_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio37_a_1";
+ };
+ default_cfg {
+ pins = "GPIO37_E15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio38 {
+ gpio38_default_mode: gpio38_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio38_a_1";
+ };
+ default_cfg {
+ pins = "GPIO38_C17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio39 {
+ gpio39_default_mode: gpio39_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio39_a_1";
+ };
+ default_cfg {
+ pins = "GPIO39_E16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio42 {
+ gpio42_default_mode: gpio42_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio42_a_1";
+ };
+ default_cfg {
+ pins = "GPIO42_U2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+ */
+ gpio26 {
+ gpio26_default_mode: gpio26_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio26_d_1";
+ };
+ default_cfg {
+ pins = "GPIO26_M16";
+ output-low;
+ };
+ };
+ };
+ gpio35 {
+ gpio35_default_mode: gpio35_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio35_d_1";
+ };
+ default_cfg {
+ pins = "GPIO35_W15";
+ output-low;
+ };
+ };
+ };
+ /*
+ * This sets up the YCBCR connector pins, i.e. analog video out.
+ * Set as input with no bias.
+ */
+ ycbcr {
+ ycbcr_default_mode: ycbcr_default {
+ default_mux {
+ function = "ycbcr";
+ groups = "ycbcr0123_d_1";
+ };
+ default_cfg {
+ pins = "GPIO6_Y18",
+ "GPIO7_AA20",
+ "GPIO8_W18",
+ "GPIO9_AA19";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ /* This sets up the PWM pins 14 and 15 */
+ pwm {
+ pwm_default_mode: pwm_default {
+ default_mux {
+ function = "pwmout";
+ groups = "pwmout1_d_1", "pwmout2_d_1";
+ };
+ default_cfg {
+ pins = "GPIO14_F14",
+ "GPIO15_B17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up audio interface 1 */
+ adi1 {
+ adi1_default_mode: adi1_default {
+ default_mux {
+ function = "adi1";
+ groups = "adi1_d_1";
+ };
+ default_cfg {
+ pins = "GPIO17_P5",
+ "GPIO18_R5",
+ "GPIO19_U5",
+ "GPIO20_T5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up the USB UICC pins */
+ usbuicc {
+ usbuicc_default_mode: usbuicc_default {
+ default_mux {
+ function = "usbuicc";
+ groups = "usbuicc_d_1";
+ };
+ default_cfg {
+ pins = "GPIO21_H19",
+ "GPIO22_G20",
+ "GPIO23_G19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up the microphone pins */
+ dmic {
+ dmic_default_mode: dmic_default {
+ default_mux {
+ function = "dmic";
+ groups = "dmic12_d_1",
+ "dmic34_d_1",
+ "dmic56_d_1";
+ };
+ default_cfg {
+ pins = "GPIO27_J6",
+ "GPIO28_K6",
+ "GPIO29_G6",
+ "GPIO30_H6",
+ "GPIO31_F5",
+ "GPIO32_G5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ extcpena {
+ extcpena_default_mode: extcpena_default {
+ default_mux {
+ function = "extcpena";
+ groups = "extcpena_d_1";
+ };
+ default_cfg {
+ pins = "GPIO34_R17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* Modem I2C setup (SCL and SDA pins) */
+ modsclsda {
+ modsclsda_default_mode: modsclsda_default {
+ default_mux {
+ function = "modsclsda";
+ groups = "modsclsda_d_1";
+ };
+ default_cfg {
+ pins = "GPIO40_T19",
+ "GPIO41_U19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Clock output pins associated with regulators.
+ */
+ sysclkreq2 {
+ sysclkreq2_default_mode: sysclkreq2_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
+ };
+ default_cfg {
+ pins = "GPIO1_T10";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq2_sleep_mode: sysclkreq2_sleep {
+ default_mux {
+ function = "gpio";
+ groups = "gpio1_a_1";
+ };
+ default_cfg {
+ pins = "GPIO1_T10";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ sysclkreq4 {
+ sysclkreq4_default_mode: sysclkreq4_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq4_d_1";
+ };
+ default_cfg {
+ pins = "GPIO3_U9";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq4_sleep_mode: sysclkreq4_sleep {
+ default_mux {
+ function = "gpio";
+ groups = "gpio3_a_1";
+ };
+ default_cfg {
+ pins = "GPIO3_U9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ };
+ /*
+ * Charging is not working on the HREF unless an actual battery is
+ * mounted, most HREFs have a DC cable in to the "battery power"
+ * which means this will only be cofusing. So do not enable charging
+ * of the HREFs.
+ */
+ ab8500_fg {
+ status = "disabled";
+ };
+ ab8500_btemp {
+ status = "disabled";
+ };
+ ab8500_charger {
+ status = "disabled";
+ };
+ ab8500_chargalg {
+ status = "disabled";
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/st/ste-href.dtsi b/arch/arm/boot/dts/st/ste-href.dtsi
index 13b11dbeba..fbf0309e10 100644
--- a/arch/arm/boot/dts/st/ste-href.dtsi
+++ b/arch/arm/boot/dts/st/ste-href.dtsi
@@ -242,61 +242,6 @@
status = "okay";
};
- prcmu@80157000 {
- ab8500 {
- gpio {
- };
-
- phy {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&usb_a_1_default>;
- pinctrl-1 = <&usb_a_1_sleep>;
- };
-
- regulator {
- ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- regulator-name = "V-DISPLAY";
- };
-
- ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
- regulator-name = "V-eMMC1";
- };
-
- ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
- regulator-name = "V-MMC-SD";
- };
-
- ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
- regulator-name = "V-INTCORE";
- };
-
- ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
- regulator-name = "V-TVOUT";
- };
-
- ab8500_ldo_audio_reg: ab8500_ldo_audio {
- regulator-name = "V-AUD";
- };
-
- ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
- regulator-name = "V-AMIC1";
- };
-
- ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
- regulator-name = "V-AMIC2";
- };
-
- ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
- regulator-name = "V-DMIC";
- };
-
- ab8500_ldo_ana_reg: ab8500_ldo_ana {
- regulator-name = "V-CSI/DSI";
- };
- };
- };
- };
-
pinctrl {
sdi0 {
sdi0_default_mode: sdi0_default {
diff --git a/arch/arm/boot/dts/st/ste-href520-tvk.dts b/arch/arm/boot/dts/st/ste-href520-tvk.dts
index 7f661f8f13..5677df43c3 100644
--- a/arch/arm/boot/dts/st/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-href520-tvk.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-tvk1281618-r3.dtsi"
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
index a29e345a43..b142bb2d38 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefprev60.dtsi"
#include "ste-href-stuib.dtsi"
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
index 1968bd1431..5da1ff41b0 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefprev60.dtsi"
#include "ste-href-tvk1281618-r2.dtsi"
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
index 9859ee91a1..c87fd27b44 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
@@ -62,7 +62,7 @@
// External Micro SD slot
mmc@80126000 {
- cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
};
pinctrl {
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
index 7a5b6aa1db..c4abe24a7c 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-stuib.dtsi"
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
index d5af3f3751..f55e8de2b5 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-tvk1281618-r2.dtsi"
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
index e66fa59c2d..b23966c16a 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
* Copyright 2012 ST-Ericsson AB
*/
-#include "ste-href-ab8500.dtsi"
#include "ste-href.dtsi"
/ {
@@ -191,7 +190,7 @@
// External Micro SD slot
mmc@80126000 {
- cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+ cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
};
pinctrl {
diff --git a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
index 6816eef39d..4d37c5fb55 100644
--- a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
@@ -52,7 +52,7 @@
gpio0: gpio@101e4000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e4000 0x80>;
+ reg = <0x101e4000 0x80>;
interrupt-parent = <&vica>;
interrupts = <6>;
interrupt-controller;
@@ -66,7 +66,7 @@
gpio1: gpio@101e5000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e5000 0x80>;
+ reg = <0x101e5000 0x80>;
interrupt-parent = <&vica>;
interrupts = <7>;
interrupt-controller;
@@ -80,7 +80,7 @@
gpio2: gpio@101e6000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e6000 0x80>;
+ reg = <0x101e6000 0x80>;
interrupt-parent = <&vica>;
interrupts = <8>;
interrupt-controller;
@@ -94,7 +94,7 @@
gpio3: gpio@101e7000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e7000 0x80>;
+ reg = <0x101e7000 0x80>;
ngpio = <28>;
interrupt-parent = <&vica>;
interrupts = <9>;
diff --git a/arch/arm/boot/dts/st/ste-snowball.dts b/arch/arm/boot/dts/st/ste-snowball.dts
index 27c2ec51e7..1322abfc7a 100644
--- a/arch/arm/boot/dts/st/ste-snowball.dts
+++ b/arch/arm/boot/dts/st/ste-snowball.dts
@@ -266,7 +266,7 @@
pinctrl-1 = <&mc0_a_1_sleep>;
/* GPIO218 MMC_CD */
- cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index 463942ae75..c623cc35c5 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -310,7 +310,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index c1ae0e23fe..2355ca6e9a 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -402,7 +402,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
index b21e40da3d..ad9a20ccaa 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
@@ -362,7 +362,7 @@
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
/* "flash detect" actually card detect */
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index 6e586e8755..229f7c3210 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -412,7 +412,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
index ba4421080b..cdb147dcc1 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
@@ -238,7 +238,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_1_default>;
pinctrl-1 = <&mc0_a_1_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts
index cbbd521bf0..8a4f8ddd08 100644
--- a/arch/arm/boot/dts/st/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f469-disco.dts
@@ -69,16 +69,9 @@
serial0 = &usart3;
};
- mmc_vcard: mmc_vcard {
+ vcc_3v3: vcc-3v3 {
compatible = "regulator-fixed";
- regulator-name = "mmc_vcard";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_dsi: vdd-dsi {
- compatible = "regulator-fixed";
- regulator-name = "vdd_dsi";
+ regulator-name = "vcc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -164,7 +157,7 @@
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
- power-supply = <&vdd_dsi>;
+ power-supply = <&vcc_3v3>;
status = "okay";
port {
@@ -219,7 +212,7 @@
&sdio {
status = "okay";
- vmmc-supply = <&mmc_vcard>;
+ vmmc-supply = <&vcc_3v3>;
cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi
index 53a8e2dec9..65c72b6fcc 100644
--- a/arch/arm/boot/dts/st/stm32f746.dtsi
+++ b/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -274,6 +274,26 @@
clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
};
+ spi2: spi@40003800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40003800 0x400>;
+ interrupts = <36>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+ status = "disabled";
+ };
+
+ spi3: spi@40003c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40003c00 0x400>;
+ interrupts = <51>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+ status = "disabled";
+ };
+
usart2: serial@40004400 {
compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
@@ -491,9 +511,30 @@
status = "disabled";
};
+ spi1: spi@40013000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40013000 0x400>;
+ interrupts = <35>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+ status = "disabled";
+ };
+
+ spi4: spi@40013400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40013400 0x400>;
+ interrupts = <84>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+ status = "disabled";
+ };
+
syscfg: syscon@40013800 {
compatible = "st,stm32-syscfg", "syscon";
reg = <0x40013800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
};
exti: interrupt-controller@40013c00 {
@@ -554,6 +595,26 @@
};
};
+ spi5: spi@40015000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40015000 0x400>;
+ interrupts = <85>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+ status = "disabled";
+ };
+
+ spi6: spi@40015400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40015400 0x400>;
+ interrupts = <86>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+ status = "disabled";
+ };
+
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi
index abf2acd37b..68d32f9f53 100644
--- a/arch/arm/boot/dts/st/stm32mp135.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp135.dtsi
@@ -8,5 +8,16 @@
/ {
soc {
+ dcmipp: dcmipp@5a000000 {
+ compatible = "st,stm32mp13-dcmipp";
+ reg = <0x5a000000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc DCMIPP_R>;
+ clocks = <&rcc DCMIPP_K>;
+ status = "disabled";
+
+ port {
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 6150891752..fa4cbd312e 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -1521,6 +1521,8 @@
clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
status = "disabled";
};
@@ -1531,6 +1533,8 @@
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
companion = <&usbh_ohci>;
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
index dd23de8510..3938d357e1 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -206,8 +206,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index c27963898b..ce5937270a 100644
--- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -59,7 +59,7 @@
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
index 5f85598cc7..5c1cc48e51 100644
--- a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
@@ -313,8 +313,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index 6226189431..c20a73841c 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -65,7 +65,7 @@
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index c7c4d7e89d..5e2eaf57ce 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -64,7 +64,7 @@
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
index f928cfb80b..4792004cab 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
@@ -500,14 +500,10 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 2ab77e64f1..3226fb945a 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -69,7 +69,7 @@
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index cd9c3ff537..9eb9a1bf4f 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -362,7 +362,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
index bd67a1db91..527c33be66 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
@@ -197,14 +197,10 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index 4e8b2d2b30..bf0c32027b 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -547,14 +547,10 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index f09b7c384b..fc3a2386db 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -567,9 +567,6 @@ baseboard_eeprom: &sip_eeprom {
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
-
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index 35b1034aa3..bb4f8a0b93 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -152,7 +152,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 46b87a27d8..466d9701ad 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -305,7 +305,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index abc595350e..b5bc53accd 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -119,12 +119,10 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
index 0069ad75d5..343a4613df 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -489,8 +489,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
index 92d906bfd5..bc4ddcbdd5 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -312,12 +312,10 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
index ab7f0ba496..6e79c4b6fe 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
@@ -168,12 +168,10 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 511113f2e3..f7634c51ef 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -680,7 +680,6 @@
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
index bff73a0ed1..5c88a90903 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
qpend {
qpend-0 {
qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
+ interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
};
qpend-1 {
qrange = <528 16>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
index 7bfc80f1af..f0ddbbcdc9 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
@@ -9,7 +9,7 @@
#include "keystone-k2g.dtsi"
/ {
- compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
+ compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
model = "Texas Instruments K2G General Purpose EVM";
memory@800000000 {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
index f6306933ff..7109ca0316 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
@@ -37,9 +37,9 @@ qmss: qmss@4020000 {
qpend {
qpend-0 {
qrange = <77 8>;
- interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
- 0 311 0xf04 0 312 0xf04 0 313 0xf04
- 0 314 0xf04 0 315 0xf04>;
+ interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+ 0 311 0xf04 0 312 0xf04 0 313 0xf04
+ 0 314 0xf04 0 315 0xf04>;
qalloc-by-id;
};
};
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
index 206df8a8d9..8dfb542950 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
@@ -10,7 +10,7 @@
#include "keystone-k2hk.dtsi"
/ {
- compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
reserved-memory {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
index 8a421c65f9..c2ee775eab 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -49,9 +49,9 @@ qmss: qmss@2a40000 {
qpend {
qpend-0 {
qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
+ interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
};
qpend-1 {
qrange = <8704 16>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
index 5ec6680a53..1afebd7458 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
qpend {
qpend-0 {
qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
+ interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
};
qpend-1 {
qrange = <528 16>;
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index d2b590004f..95c68135dd 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-sdp.dtb \
omap4-sdp-es23plus.dtb \
omap4-var-dvk-om44.dtb \
- omap4-var-stk-om44.dtb
+ omap4-var-stk-om44.dtb \
+ omap4-xyboard-mz609.dtb \
+ omap4-xyboard-mz617.dtb
dtb-$(CONFIG_SOC_AM33XX) += \
am335x-baltos-ir2110.dtb \
am335x-baltos-ir3220.dtb \
@@ -129,6 +131,16 @@ dtb-$(CONFIG_SOC_AM43XX) += \
am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
+am571x-idk-overlays-dtbs := am571x-idk.dtb \
+ am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo
+am572x-idk-overlays-dtbs := am572x-idk.dtb \
+ am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo
+
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+dtb- += \
+ am571x-idk-overlays.dtb \
+ am572x-idk-overlays.dtb
+
dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
index 4842502028..322cf79d22 100644
--- a/arch/arm/boot/dts/ti/omap/am571x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
@@ -168,8 +168,8 @@
};
&extcon_usb2 {
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 5b240769d3..3e834fc7e3 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -197,7 +197,7 @@
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
ti,enable-id-detection;
- id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
index 1d66278c3a..3fca84819d 100644
--- a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@
};
&extcon_usb2 {
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
diff --git a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
index 4cdffd6db7..ed5199d7ac 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
sound0: sound0 {
diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index a643644430..f747ac56eb 100644
--- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -293,11 +293,11 @@
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&ipu2 {
diff --git a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
index 31ab0c60ca..f8151c6148 100644
--- a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
diff --git a/arch/arm/boot/dts/ti/omap/dra76-evm.dts b/arch/arm/boot/dts/ti/omap/dra76-evm.dts
index 57868ac60d..cf9c3d35b0 100644
--- a/arch/arm/boot/dts/ti/omap/dra76-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra76-evm.dts
@@ -533,11 +533,11 @@
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&m_can0 {
diff --git a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
index 533ce7ce38..fbff15a0a0 100644
--- a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -52,7 +52,7 @@
&uart2 {
/delete-property/dma-names;
- bluetooth {
+ bluetooth-gnss {
compatible = "ti,wl1283-st";
enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
max-speed = <3000000>;
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
index a2bb3609c9..a0c53d9c26 100644
--- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
@@ -6,15 +6,6 @@
#include "motorola-cpcap-mapphone.dtsi"
/ {
- chosen {
- stdout-path = &uart3;
- };
-
- aliases {
- display0 = &lcd0;
- display1 = &hdmi0;
- };
-
/*
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
* then 1023 - 1024 seems to contain mbm.
@@ -63,46 +54,6 @@
regulator-always-on;
};
- /* FS USB Host PHY on port 1 for mdm6600 */
- fsusb1_phy: usb-phy@1 {
- compatible = "motorola,mapphone-mdm6600";
- pinctrl-0 = <&usb_mdm6600_pins>;
- pinctrl-1 = <&usb_mdm6600_sleep_pins>;
- pinctrl-names = "default", "sleep";
- enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
- power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
- reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
- /* mode: gpio_148 gpio_149 */
- motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
- <&gpio5 21 GPIO_ACTIVE_HIGH>;
- /* cmd: gpio_103 gpio_104 gpio_142 */
- motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
- <&gpio4 8 GPIO_ACTIVE_HIGH>,
- <&gpio5 14 GPIO_ACTIVE_HIGH>;
- /* status: gpio_52 gpio_53 gpio_55 */
- motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
- <&gpio2 21 GPIO_ACTIVE_HIGH>,
- <&gpio2 23 GPIO_ACTIVE_HIGH>;
- #phy-cells = <0>;
- };
-
- /* HS USB host TLL nop-phy on port 2 for w3glte */
- hsusb2_phy: usb-phy@2 {
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
-
- /* LCD regulator from sw5 source */
- lcd_regulator: regulator-lcd {
- compatible = "regulator-fixed";
- regulator-name = "lcd";
- regulator-min-microvolt = <5050000>;
- regulator-max-microvolt = <5050000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
- enable-active-high;
- vin-supply = <&sw5>;
- };
-
/* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
@@ -133,41 +84,6 @@
dais = <&mcbsp2_port>, <&mcbsp3_port>;
};
-
- pwm8: pwm-8 {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_direction_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer8>;
- ti,clock-source = <0x01>;
- };
-
- pwm9: pwm-9 {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_enable_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer9>;
- ti,clock-source = <0x01>;
- };
-
- vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
- pwm-names = "enable", "direction";
- direction-duty-cycle-ns = <10000000>;
- };
-
- backlight: backlight {
- compatible = "led-backlight";
-
- leds = <&backlight_led>;
- brightness-levels = <31 63 95 127 159 191 223 255>;
- default-brightness-level = <6>;
- };
};
&cpu_thermal {
@@ -197,57 +113,6 @@
status = "okay";
};
-&dsi1 {
- status = "okay";
- vdd-supply = <&vcsi>;
-
- port {
- dsi1_out_ep: endpoint {
- remote-endpoint = <&lcd0_in>;
- lanes = <0 1 2 3 4 5>;
- };
- };
-
- lcd0: panel@0 {
- compatible = "motorola,droid4-panel", "panel-dsi-cm";
- reg = <0>;
- label = "lcd0";
- vddi-supply = <&lcd_regulator>;
- reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
-
- backlight = <&backlight>;
-
- width-mm = <50>;
- height-mm = <89>;
- rotation = <90>;
-
- panel-timing {
- clock-frequency = <0>; /* Calculated by dsi */
-
- hback-porch = <2>;
- hactive = <540>;
- hfront-porch = <0>;
- hsync-len = <2>;
-
- vback-porch = <1>;
- vactive = <960>;
- vfront-porch = <0>;
- vsync-len = <1>;
-
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- port {
- lcd0_in: endpoint {
- remote-endpoint = <&dsi1_out_ep>;
- };
- };
- };
-};
-
&hdmi {
status = "okay";
pinctrl-0 = <&dss_hdmi_pins>;
@@ -262,13 +127,6 @@
};
};
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
- pinctrl-0 = <&hdq_pins>;
- pinctrl-names = "default";
- ti,mode = "1w";
-};
-
&i2c1 {
tmp105@48 {
compatible = "ti,tmp105";
@@ -322,34 +180,6 @@
};
};
-&i2c2 {
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchscreen_pins>;
-
- reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
- /* gpio_183 with sys_nirq2 pad as wakeup */
- interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
- <&omap4_pmx_core 0x160>;
- interrupt-names = "irq", "wakeup";
- wakeup-source;
- };
-
- isl29030@44 {
- compatible = "isil,isl29030";
- reg = <0x44>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&als_proximity_pins>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
- };
-};
-
&omap4_pmx_core {
/* hdmi_hpd.gpio_63 */
@@ -359,13 +189,6 @@
>;
};
- hdq_pins: hdq-pins {
- pinctrl-single,pins = <
- /* 0x4a100120 hdq_sio.hdq_sio aa27 */
- OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
- >;
- };
-
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
dss_hdmi_pins: dss-hdmi-pins {
pinctrl-single,pins = <
@@ -427,73 +250,6 @@
>;
};
- touchscreen_pins: touchscreen-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
- >;
- };
-
- als_proximity_pins: als-proximity-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
- >;
- };
-
- usb_mdm6600_pins: usb-mdm6600-pins {
- pinctrl-single,pins = <
- /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
- OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
- /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
- OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
- /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
- OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
- /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
- OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
- /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
- OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
- /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
- OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
- /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
- OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
- /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
- OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
- /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
- OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
- /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
- OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
- /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
- OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
- >;
- };
-
- /* Modem sleep pins to keep gpio_49 high with internal pull */
- usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
- OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
- >;
- };
-
usb_ulpi_pins: usb-ulpi-pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -601,18 +357,6 @@
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-
- vibrator_direction_pin: vibrator-direction-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
- >;
- };
-
- vibrator_enable_pin: vibrator-enable-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
- >;
- };
};
&omap4_pmx_wkup {
@@ -629,17 +373,6 @@
status = "disabled";
};
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
- assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
- assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
- assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
- assigned-clock-parents = <&sys_32k_ck>;
-};
-
/*
* The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
* for wake-up events for both the USB PHY and the UART. We can use gpio_149
@@ -672,20 +405,6 @@
};
};
-&usbhsohci {
- phys = <&fsusb1_phy>;
- phy-names = "usb";
-};
-
-&usbhsehci {
- phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
- port1-mode = "ohci-phy-4pin-dpdm";
- port2-mode = "ehci-tll";
-};
-
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
&usb_otg_hs {
interface-type = <1>;
@@ -698,23 +417,6 @@
power = <150>;
};
-&i2c4 {
- ak8975: magnetometer@c {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0c>;
-
- vdd-supply = <&vhvio>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
- rotation-matrix = "-1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
-
- };
-};
-
&mcbsp2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
new file mode 100644
index 0000000000..f3f9ff02b3
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+ /* FS USB Host PHY on port 1 for mdm6600 */
+ fsusb1_phy: usb-phy@1 {
+ compatible = "motorola,mapphone-mdm6600";
+ pinctrl-0 = <&usb_mdm6600_pins>;
+ pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+ pinctrl-names = "default", "sleep";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
+ /* mode: gpio_148 gpio_149 */
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ /* cmd: gpio_103 gpio_104 gpio_142 */
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ /* status: gpio_52 gpio_53 gpio_55 */
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB host TLL nop-phy on port 2 for w3glte */
+ hsusb2_phy: usb-phy@2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ pwm8: pwm-8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: pwm-9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <10000000>;
+ };
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+ pinctrl-0 = <&hdq_pins>;
+ pinctrl-names = "default";
+ ti,mode = "1w";
+};
+
+&i2c2 {
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+ /* gpio_183 with sys_nirq2 pad as wakeup */
+ interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+ <&omap4_pmx_core 0x160>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+
+ isl29030@44 {
+ compatible = "isil,isl29030";
+ reg = <0x44>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&als_proximity_pins>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+ };
+};
+
+&omap4_pmx_core {
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ /* 0x4a100120 hdq_sio.hdq_sio aa27 */
+ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /* kpd_row0.gpio_178 */
+ tmp105_irq: tmp105-irq-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ touchscreen_pins: touchscreen-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_mdm6600_pins: usb-mdm6600-pins {
+ pinctrl-single,pins = <
+ /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+ /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+ /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+ /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+ /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+ /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+ /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ /* Modem sleep pins to keep gpio_49 high with internal pull */
+ usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ als_proximity_pins: als-proximity-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ vibrator_direction_pin: vibrator-direction-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: vibrator-enable-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+ assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+ assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+ phys = <&fsusb1_phy>;
+ phy-names = "usb";
+};
+
+&usbhsehci {
+ phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+ port1-mode = "ohci-phy-4pin-dpdm";
+ port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+ ak8975: magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+ rotation-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+
+ };
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
index 0000000000..a356b3a2f2
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+ <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+ vmmc-supply = <&vsimcard>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio_176 */
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
new file mode 100644
index 0000000000..8b8de92b54
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+
+ /* LCD regulator from sw5 source */
+ lcd_regulator: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ enable-active-high;
+ vin-supply = <&sw5>;
+ };
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcsi>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: panel@0 {
+ compatible = "motorola,droid4-panel", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd0";
+ vddi-supply = <&lcd_regulator>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ backlight = <&backlight>;
+
+ width-mm = <50>;
+ height-mm = <89>;
+ rotation = <90>;
+
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <540>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <960>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
index ccf03a7436..1d9000f84f 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
@@ -1,11 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
/ {
model = "Motorola Droid Bionic XT875";
compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
};
&keypad {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
index e833c21f1c..cc3f3e1b65 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
@@ -1,9 +1,21 @@
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
/ {
+ model = "Motorola Droid 4 XT894";
+ compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
gpio_keys {
compatible = "gpio-keys";
@@ -33,11 +45,6 @@
};
};
-/ {
- model = "Motorola Droid 4 XT894";
- compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index 01d783826d..24f7d0285f 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -51,6 +51,12 @@
regulator-name = "unknown";
};
+ wl12xx_pwrseq: wl12xx-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&twl 1>;
+ clock-names = "ext_clock";
+ };
+
/* regulator for wl12xx on sdio2 */
wl12xx_vmmc: wl12xx-vmmc {
pinctrl-names = "default";
@@ -74,6 +80,7 @@
twl: pmic@48 {
compatible = "ti,twl6032";
reg = <0x48>;
+ #clock-cells = <1>;
/* IRQ# = 7 */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-controller;
@@ -294,6 +301,7 @@
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_pins>;
vmmc-supply = <&wl12xx_vmmc>;
+ mmc-pwrseq = <&wl12xx_pwrseq>;
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0x12e>;
non-removable;
@@ -454,10 +462,12 @@
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
- /*
- * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
- * which does not have a driver
- */
+ bluetooth-gnss {
+ compatible = "ti,wl1283-st";
+ enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; /* GPIO_25 */
+ clocks = <&twl 1>;
+ clock-names = "ext_clock";
+ };
};
&uart3 {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
index 0000000000..762934e2d0
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+ model = "Motorola Xyboard MZ609";
+ compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display1 = &hdmi0;
+ };
+
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
index 0000000000..b9caea3b7f
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+ model = "Motorola Xyboard MZ617";
+ compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display1 = &hdmi0;
+ };
+};