diff options
Diffstat (limited to 'arch/arm/mach-footbridge')
20 files changed, 2728 insertions, 0 deletions
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig new file mode 100644 index 0000000000..78189997ca --- /dev/null +++ b/arch/arm/mach-footbridge/Kconfig @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_FOOTBRIDGE + bool "FootBridge Implementations" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_MOXART || ARCH_GEMINI || ARCH_SA1100) + depends on ATAGS + depends on CPU_LITTLE_ENDIAN + depends on MMU + select ARCH_NO_SG_CHAIN + select CPU_SA110 + select FOOTBRIDGE + select NEED_MACH_MEMORY_H + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. + +if ARCH_FOOTBRIDGE + +config ARCH_EBSA285_HOST + bool "EBSA285 (host mode)" + select ARCH_EBSA285 + select ISA + select ARCH_MAY_HAVE_PC_FDC + select FORCE_PCI + help + Say Y here if you intend to run this kernel on the EBSA285 card + in host ("central function") mode. + + Saying N will reduce the size of the Footbridge kernel. + +config ARCH_NETWINDER + bool "NetWinder" + select CLKEVT_I8253 + select CLKSRC_I8253 + select ISA + select FORCE_PCI + help + Say Y here if you intend to run this kernel on the Rebel.COM + NetWinder. Information about this machine can be found at: + + <http://www.netwinder.org/> + + Saying N will reduce the size of the Footbridge kernel. + +# Footbridge support +config FOOTBRIDGE + def_bool y + select ARCH_MIGHT_HAVE_PC_SERIO + select ISA_DMA_API + +config ARCH_EBSA285 + bool + +endif diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile new file mode 100644 index 0000000000..1553cc01b4 --- /dev/null +++ b/arch/arm/mach-footbridge/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := common.o isa-irq.o isa.o isa-rtc.o dma-isa.o + +pci-y += dc21285.o +pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o +pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o + +obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o +obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o + +obj-$(CONFIG_PCI) +=$(pci-y) + diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c new file mode 100644 index 0000000000..85c598708c --- /dev/null +++ b/arch/arm/mach-footbridge/common.c @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/arch/arm/mach-footbridge/common.c + * + * Copyright (C) 1998-2000 Russell King, Dave Gilbert. + */ +#include <linux/module.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/list.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/dma-direct.h> +#include <video/vga.h> + +#include <asm/page.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/setup.h> +#include <asm/system_misc.h> +#include <asm/hardware/dec21285.h> + +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/pci.h> + +#include "common.h" + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <asm/hardware/dec21285.h> + +static int dc21285_get_irq(void) +{ + void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS; + u32 mask = readl(irqstatus); + + if (mask & IRQ_MASK_SDRAMPARITY) + return IRQ_SDRAMPARITY; + + if (mask & IRQ_MASK_UART_RX) + return IRQ_CONRX; + + if (mask & IRQ_MASK_DMA1) + return IRQ_DMA1; + + if (mask & IRQ_MASK_DMA2) + return IRQ_DMA2; + + if (mask & IRQ_MASK_IN0) + return IRQ_IN0; + + if (mask & IRQ_MASK_IN1) + return IRQ_IN1; + + if (mask & IRQ_MASK_IN2) + return IRQ_IN2; + + if (mask & IRQ_MASK_IN3) + return IRQ_IN3; + + if (mask & IRQ_MASK_PCI) + return IRQ_PCI; + + if (mask & IRQ_MASK_DOORBELLHOST) + return IRQ_DOORBELLHOST; + + if (mask & IRQ_MASK_I2OINPOST) + return IRQ_I2OINPOST; + + if (mask & IRQ_MASK_TIMER1) + return IRQ_TIMER1; + + if (mask & IRQ_MASK_TIMER2) + return IRQ_TIMER2; + + if (mask & IRQ_MASK_TIMER3) + return IRQ_TIMER3; + + if (mask & IRQ_MASK_UART_TX) + return IRQ_CONTX; + + if (mask & IRQ_MASK_PCI_ABORT) + return IRQ_PCI_ABORT; + + if (mask & IRQ_MASK_PCI_SERR) + return IRQ_PCI_SERR; + + if (mask & IRQ_MASK_DISCARD_TIMER) + return IRQ_DISCARD_TIMER; + + if (mask & IRQ_MASK_PCI_DPERR) + return IRQ_PCI_DPERR; + + if (mask & IRQ_MASK_PCI_PERR) + return IRQ_PCI_PERR; + + return 0; +} + +static void dc21285_handle_irq(struct pt_regs *regs) +{ + int irq; + do { + irq = dc21285_get_irq(); + if (!irq) + break; + + generic_handle_irq(irq); + } while (1); +} + + +unsigned int mem_fclk_21285 = 50000000; + +EXPORT_SYMBOL(mem_fclk_21285); + +static int __init early_fclk(char *arg) +{ + mem_fclk_21285 = simple_strtoul(arg, NULL, 0); + return 0; +} + +early_param("mem_fclk_21285", early_fclk); + +static int __init parse_tag_memclk(const struct tag *tag) +{ + mem_fclk_21285 = tag->u.memclk.fmemclk; + return 0; +} + +__tagtable(ATAG_MEMCLK, parse_tag_memclk); + +/* + * Footbridge IRQ translation table + * Converts from our IRQ numbers into FootBridge masks + */ +static const int fb_irq_mask[] = { + IRQ_MASK_UART_RX, /* 0 */ + IRQ_MASK_UART_TX, /* 1 */ + IRQ_MASK_TIMER1, /* 2 */ + IRQ_MASK_TIMER2, /* 3 */ + IRQ_MASK_TIMER3, /* 4 */ + IRQ_MASK_IN0, /* 5 */ + IRQ_MASK_IN1, /* 6 */ + IRQ_MASK_IN2, /* 7 */ + IRQ_MASK_IN3, /* 8 */ + IRQ_MASK_DOORBELLHOST, /* 9 */ + IRQ_MASK_DMA1, /* 10 */ + IRQ_MASK_DMA2, /* 11 */ + IRQ_MASK_PCI, /* 12 */ + IRQ_MASK_SDRAMPARITY, /* 13 */ + IRQ_MASK_I2OINPOST, /* 14 */ + IRQ_MASK_PCI_ABORT, /* 15 */ + IRQ_MASK_PCI_SERR, /* 16 */ + IRQ_MASK_DISCARD_TIMER, /* 17 */ + IRQ_MASK_PCI_DPERR, /* 18 */ + IRQ_MASK_PCI_PERR, /* 19 */ +}; + +static void fb_mask_irq(struct irq_data *d) +{ + *CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(d->irq)]; +} + +static void fb_unmask_irq(struct irq_data *d) +{ + *CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(d->irq)]; +} + +static struct irq_chip fb_chip = { + .irq_ack = fb_mask_irq, + .irq_mask = fb_mask_irq, + .irq_unmask = fb_unmask_irq, +}; + +static void __init __fb_init_irq(void) +{ + unsigned int irq; + + /* + * setup DC21285 IRQs + */ + *CSR_IRQ_DISABLE = -1; + *CSR_FIQ_DISABLE = -1; + + for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) { + irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); + } +} + +void __init footbridge_init_irq(void) +{ + set_handle_irq(dc21285_handle_irq); + + __fb_init_irq(); + + if (machine_is_ebsa285()) + /* The following is dependent on which slot + * you plug the Southbridge card into. We + * currently assume that you plug it into + * the right-hand most slot. + */ + isa_init_irq(IRQ_PCI); + + if (machine_is_netwinder()) + isa_init_irq(IRQ_IN3); +} + +/* + * Common mapping for all systems. Note that the outbound write flush is + * commented out since there is a "No Fix" problem with it. Not mapping + * it means that we have extra bullet protection on our feet. + */ +static struct map_desc ebsa285_host_io_desc[] __initdata = { + { + .virtual = ARMCSR_BASE, + .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), + .length = ARMCSR_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = PCIMEM_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_MEM), + .length = PCIMEM_SIZE, + .type = MT_DEVICE, + }, { + .virtual = PCICFG0_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG), + .length = PCICFG0_SIZE, + .type = MT_DEVICE, + }, { + .virtual = PCICFG1_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG), + .length = PCICFG1_SIZE, + .type = MT_DEVICE, + }, { + .virtual = PCIIACK_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IACK), + .length = PCIIACK_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init footbridge_map_io(void) +{ + iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); + vga_base = PCIMEM_BASE; +} + +void footbridge_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode == REBOOT_SOFT) { + /* Jump into the ROM */ + soft_restart(0x41000000); + } else { + /* + * Force the watchdog to do a CPU reset. + * + * After making sure that the watchdog is disabled + * (so we can change the timer registers) we first + * enable the timer to autoreload itself. Next, the + * timer interval is set really short and any + * current interrupt request is cleared (so we can + * see an edge transition). Finally, TIMER4 is + * enabled as the watchdog. + */ + *CSR_SA110_CNTL &= ~(1 << 13); + *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | + TIMER_CNTL_AUTORELOAD | + TIMER_CNTL_DIV16; + *CSR_TIMER4_LOAD = 0x2; + *CSR_TIMER4_CLR = 0; + *CSR_SA110_CNTL |= (1 << 13); + } +} diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h new file mode 100644 index 0000000000..e12587db59 --- /dev/null +++ b/arch/arm/mach-footbridge/common.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <linux/reboot.h> + +extern void footbridge_timer_init(void); +extern void isa_timer_init(void); + +extern void isa_rtc_init(void); + +extern void footbridge_map_io(void); +extern void footbridge_init_irq(void); + +extern void isa_init_irq(unsigned int irq); +extern void footbridge_restart(enum reboot_mode, const char *); + +extern void footbridge_sched_clock(void); diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c new file mode 100644 index 0000000000..2908c9ef3c --- /dev/null +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-footbridge/dc21285-timer.c + * + * Copyright (C) 1998 Russell King. + * Copyright (C) 1998 Phil Blundell + */ +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sched_clock.h> + +#include <asm/irq.h> + +#include <asm/hardware/dec21285.h> +#include <asm/mach/time.h> +#include <asm/system_info.h> + +#include "common.h" + +static u64 cksrc_dc21285_read(struct clocksource *cs) +{ + return cs->mask - *CSR_TIMER2_VALUE; +} + +static int cksrc_dc21285_enable(struct clocksource *cs) +{ + *CSR_TIMER2_LOAD = cs->mask; + *CSR_TIMER2_CLR = 0; + *CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + return 0; +} + +static void cksrc_dc21285_disable(struct clocksource *cs) +{ + *CSR_TIMER2_CNTL = 0; +} + +static struct clocksource cksrc_dc21285 = { + .name = "dc21285_timer2", + .rating = 200, + .read = cksrc_dc21285_read, + .enable = cksrc_dc21285_enable, + .disable = cksrc_dc21285_disable, + .mask = CLOCKSOURCE_MASK(24), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int ckevt_dc21285_set_next_event(unsigned long delta, + struct clock_event_device *c) +{ + *CSR_TIMER1_CLR = 0; + *CSR_TIMER1_LOAD = delta; + *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + + return 0; +} + +static int ckevt_dc21285_shutdown(struct clock_event_device *c) +{ + *CSR_TIMER1_CNTL = 0; + return 0; +} + +static int ckevt_dc21285_set_periodic(struct clock_event_device *c) +{ + *CSR_TIMER1_CLR = 0; + *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ); + *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | + TIMER_CNTL_DIV16; + return 0; +} + +static struct clock_event_device ckevt_dc21285 = { + .name = "dc21285_timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .irq = IRQ_TIMER1, + .set_next_event = ckevt_dc21285_set_next_event, + .set_state_shutdown = ckevt_dc21285_shutdown, + .set_state_periodic = ckevt_dc21285_set_periodic, + .set_state_oneshot = ckevt_dc21285_shutdown, + .tick_resume = ckevt_dc21285_set_periodic, +}; + +static irqreturn_t timer1_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = dev_id; + + *CSR_TIMER1_CLR = 0; + + /* Stop the timer if in one-shot mode */ + if (clockevent_state_oneshot(ce)) + *CSR_TIMER1_CNTL = 0; + + ce->event_handler(ce); + + return IRQ_HANDLED; +} + +/* + * Set up timer interrupt. + */ +void __init footbridge_timer_init(void) +{ + struct clock_event_device *ce = &ckevt_dc21285; + unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16); + + clocksource_register_hz(&cksrc_dc21285, rate); + + if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "dc21285_timer1", &ckevt_dc21285)) + pr_err("Failed to request irq %d (dc21285_timer1)", ce->irq); + + ce->cpumask = cpumask_of(smp_processor_id()); + clockevents_config_and_register(ce, rate, 0x4, 0xffffff); +} + +static u64 notrace footbridge_read_sched_clock(void) +{ + return ~*CSR_TIMER3_VALUE; +} + +void __init footbridge_sched_clock(void) +{ + unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16); + + *CSR_TIMER3_LOAD = 0; + *CSR_TIMER3_CLR = 0; + *CSR_TIMER3_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + + sched_clock_register(footbridge_read_sched_clock, 24, rate); +} diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c new file mode 100644 index 0000000000..f8920d0010 --- /dev/null +++ b/arch/arm/mach-footbridge/dc21285.c @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/arch/arm/kernel/dec21285.c: PCI functions for DC21285 + * + * Copyright (C) 1998-2001 Russell King + * Copyright (C) 1998-2000 Phil Blundell + */ +#include <linux/dma-map-ops.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm/irq.h> +#include <asm/mach/pci.h> +#include <asm/hardware/dec21285.h> + +#define MAX_SLOTS 21 + +#define PCICMD_ABORT ((PCI_STATUS_REC_MASTER_ABORT| \ + PCI_STATUS_REC_TARGET_ABORT)<<16) + +#define PCICMD_ERROR_BITS ((PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_PARITY) << 16) + +extern int setup_arm_irq(int, struct irqaction *); + +static unsigned long +dc21285_base_address(struct pci_bus *bus, unsigned int devfn) +{ + unsigned long addr = 0; + + if (bus->number == 0) { + if (PCI_SLOT(devfn) == 0) + /* + * For devfn 0, point at the 21285 + */ + addr = ARMCSR_BASE; + else { + devfn -= 1 << 3; + + if (devfn < PCI_DEVFN(MAX_SLOTS, 0)) + addr = PCICFG0_BASE | 0xc00000 | (devfn << 8); + } + } else + addr = PCICFG1_BASE | (bus->number << 16) | (devfn << 8); + + return addr; +} + +static int +dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = dc21285_base_address(bus, devfn); + u32 v = 0xffffffff; + + if (addr) + switch (size) { + case 1: + asm volatile("ldrb %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); + break; + case 2: + asm volatile("ldrh %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); + break; + case 4: + asm volatile("ldr %0, [%1, %2]" + : "=r" (v) : "r" (addr), "r" (where) : "cc"); + break; + } + + *value = v; + + v = *CSR_PCICMD; + if (v & PCICMD_ABORT) { + *CSR_PCICMD = v & (0xffff|PCICMD_ABORT); + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int +dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = dc21285_base_address(bus, devfn); + u32 v; + + if (addr) + switch (size) { + case 1: + asm volatile("strb %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); + break; + case 2: + asm volatile("strh %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); + break; + case 4: + asm volatile("str %0, [%1, %2]" + : : "r" (value), "r" (addr), "r" (where) + : "cc"); + break; + } + + v = *CSR_PCICMD; + if (v & PCICMD_ABORT) { + *CSR_PCICMD = v & (0xffff|PCICMD_ABORT); + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops dc21285_ops = { + .read = dc21285_read_config, + .write = dc21285_write_config, +}; + +static struct timer_list serr_timer; +static struct timer_list perr_timer; + +static void dc21285_enable_error(struct timer_list *timer) +{ + del_timer(timer); + + if (timer == &serr_timer) + enable_irq(IRQ_PCI_SERR); + else if (timer == &perr_timer) + enable_irq(IRQ_PCI_PERR); +} + +/* + * Warn on PCI errors. + */ +static irqreturn_t dc21285_abort_irq(int irq, void *dev_id) +{ + unsigned int cmd; + unsigned int status; + + cmd = *CSR_PCICMD; + status = cmd >> 16; + cmd = cmd & 0xffff; + + if (status & PCI_STATUS_REC_MASTER_ABORT) { + printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", + instruction_pointer(get_irq_regs())); + cmd |= PCI_STATUS_REC_MASTER_ABORT << 16; + } + + if (status & PCI_STATUS_REC_TARGET_ABORT) { + printk(KERN_DEBUG "PCI: target abort: "); + pcibios_report_status(PCI_STATUS_REC_MASTER_ABORT | + PCI_STATUS_SIG_TARGET_ABORT | + PCI_STATUS_REC_TARGET_ABORT, 1); + printk("\n"); + + cmd |= PCI_STATUS_REC_TARGET_ABORT << 16; + } + + *CSR_PCICMD = cmd; + + return IRQ_HANDLED; +} + +static irqreturn_t dc21285_serr_irq(int irq, void *dev_id) +{ + struct timer_list *timer = dev_id; + unsigned int cntl; + + printk(KERN_DEBUG "PCI: system error received: "); + pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); + printk("\n"); + + cntl = *CSR_SA110_CNTL & 0xffffdf07; + *CSR_SA110_CNTL = cntl | SA110_CNTL_RXSERR; + + /* + * back off this interrupt + */ + disable_irq(irq); + timer->expires = jiffies + HZ; + add_timer(timer); + + return IRQ_HANDLED; +} + +static irqreturn_t dc21285_discard_irq(int irq, void *dev_id) +{ + printk(KERN_DEBUG "PCI: discard timer expired\n"); + *CSR_SA110_CNTL &= 0xffffde07; + + return IRQ_HANDLED; +} + +static irqreturn_t dc21285_dparity_irq(int irq, void *dev_id) +{ + unsigned int cmd; + + printk(KERN_DEBUG "PCI: data parity error detected: "); + pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1); + printk("\n"); + + cmd = *CSR_PCICMD & 0xffff; + *CSR_PCICMD = cmd | 1 << 24; + + return IRQ_HANDLED; +} + +static irqreturn_t dc21285_parity_irq(int irq, void *dev_id) +{ + struct timer_list *timer = dev_id; + unsigned int cmd; + + printk(KERN_DEBUG "PCI: parity error detected: "); + pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1); + printk("\n"); + + cmd = *CSR_PCICMD & 0xffff; + *CSR_PCICMD = cmd | 1 << 31; + + /* + * back off this interrupt + */ + disable_irq(irq); + timer->expires = jiffies + HZ; + add_timer(timer); + + return IRQ_HANDLED; +} + +static int dc21285_pci_bus_notifier(struct notifier_block *nb, + unsigned long action, + void *data) +{ + if (action != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + + dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M); + + return NOTIFY_OK; +} + +static struct notifier_block dc21285_pci_bus_nb = { + .notifier_call = dc21285_pci_bus_notifier, +}; + +int __init dc21285_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + res = kcalloc(2, sizeof(struct resource), GFP_KERNEL); + if (!res) { + printk("out of memory for root bus resources"); + return 0; + } + + res[0].flags = IORESOURCE_MEM; + res[0].name = "Footbridge non-prefetch"; + res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + res[1].name = "Footbridge prefetch"; + + allocate_resource(&iomem_resource, &res[1], 0x20000000, + 0xa0000000, 0xffffffff, 0x20000000, NULL, NULL); + allocate_resource(&iomem_resource, &res[0], 0x40000000, + 0x80000000, 0xffffffff, 0x40000000, NULL, NULL); + + sys->mem_offset = DC21285_PCI_MEM; + + pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + + bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb); + + return 1; +} + +#define dc21285_request_irq(_a, _b, _c, _d, _e) \ + WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0) + +void __init dc21285_preinit(void) +{ + unsigned int mem_size, mem_mask; + + pcibios_min_mem = 0x81000000; + + mem_size = (unsigned int)high_memory - PAGE_OFFSET; + for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) + if (mem_mask >= mem_size) + break; + + /* + * These registers need to be set up whether we're the + * central function or not. + */ + *CSR_SDRAMBASEMASK = (mem_mask - 1) & 0x0ffc0000; + *CSR_SDRAMBASEOFFSET = 0; + *CSR_ROMBASEMASK = 0x80000000; + *CSR_CSRBASEMASK = 0; + *CSR_CSRBASEOFFSET = 0; + *CSR_PCIADDR_EXTN = 0; + + printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in " + "central function mode\n", *CSR_CLASSREV & 0xff); + + /* + * Clear any existing errors - we aren't + * interested in historical data... + */ + *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR; + *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; + + timer_setup(&serr_timer, dc21285_enable_error, 0); + timer_setup(&perr_timer, dc21285_enable_error, 0); + + /* + * We don't care if these fail. + */ + dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, 0, + "PCI system error", &serr_timer); + dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, 0, + "PCI parity error", &perr_timer); + dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, 0, + "PCI abort", NULL); + dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, 0, + "Discard timer", NULL); + dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0, + "PCI data parity", NULL); + + /* + * Map our SDRAM at a known address in PCI space, just in case + * the firmware had other ideas. Using a nonzero base is + * necessary, since some VGA cards forcefully use PCI addresses + * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). + */ + *CSR_PCICSRBASE = 0xf4000000; + *CSR_PCICSRIOBASE = 0; + *CSR_PCISDRAMBASE = BUS_OFFSET; + *CSR_PCIROMBASE = 0; + *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; +} + +void __init dc21285_postinit(void) +{ + register_isa_ports(DC21285_PCI_MEM, DC21285_PCI_IO, 0); +} diff --git a/arch/arm/mach-footbridge/dma-isa.c b/arch/arm/mach-footbridge/dma-isa.c new file mode 100644 index 0000000000..937f5376d5 --- /dev/null +++ b/arch/arm/mach-footbridge/dma-isa.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 1999-2000 Russell King + * + * ISA DMA primitives + * Taken from various sources, including: + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen and John Boyd, + * Nov. 1992. + * arch/arm/kernel/dma-ebsa285.c + * Copyright (C) 1998 Phil Blundell + */ +#include <linux/dma-map-ops.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> + +#include <asm/dma.h> +#include <asm/mach/dma.h> +#include <asm/hardware/dec21285.h> + +#define ISA_DMA_MASK 0 +#define ISA_DMA_MODE 1 +#define ISA_DMA_CLRFF 2 +#define ISA_DMA_PGHI 3 +#define ISA_DMA_PGLO 4 +#define ISA_DMA_ADDR 5 +#define ISA_DMA_COUNT 6 + +static unsigned int isa_dma_port[8][7] = { + /* MASK MODE CLRFF PAGE_HI PAGE_LO ADDR COUNT */ + { 0x0a, 0x0b, 0x0c, 0x487, 0x087, 0x00, 0x01 }, + { 0x0a, 0x0b, 0x0c, 0x483, 0x083, 0x02, 0x03 }, + { 0x0a, 0x0b, 0x0c, 0x481, 0x081, 0x04, 0x05 }, + { 0x0a, 0x0b, 0x0c, 0x482, 0x082, 0x06, 0x07 }, + { 0xd4, 0xd6, 0xd8, 0x000, 0x000, 0xc0, 0xc2 }, + { 0xd4, 0xd6, 0xd8, 0x48b, 0x08b, 0xc4, 0xc6 }, + { 0xd4, 0xd6, 0xd8, 0x489, 0x089, 0xc8, 0xca }, + { 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce } +}; + +static int isa_get_dma_residue(unsigned int chan, dma_t *dma) +{ + unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT]; + int count; + + count = 1 + inb(io_port); + count |= inb(io_port) << 8; + + return chan < 4 ? count : (count << 1); +} + +static struct device isa_dma_dev = { + .init_name = "fallback device", + .coherent_dma_mask = ~(dma_addr_t)0, + .dma_mask = &isa_dma_dev.coherent_dma_mask, +}; + +static void isa_enable_dma(unsigned int chan, dma_t *dma) +{ + if (dma->invalid) { + unsigned long address, length; + unsigned int mode; + enum dma_data_direction direction; + + mode = (chan & 3) | dma->dma_mode; + switch (dma->dma_mode & DMA_MODE_MASK) { + case DMA_MODE_READ: + direction = DMA_FROM_DEVICE; + break; + + case DMA_MODE_WRITE: + direction = DMA_TO_DEVICE; + break; + + case DMA_MODE_CASCADE: + direction = DMA_BIDIRECTIONAL; + break; + + default: + direction = DMA_NONE; + break; + } + + if (!dma->sg) { + /* + * Cope with ISA-style drivers which expect cache + * coherence. + */ + dma->sg = &dma->buf; + dma->sgcount = 1; + dma->buf.length = dma->count; + dma->buf.dma_address = dma_map_single(&isa_dma_dev, + dma->addr, dma->count, + direction); + } + + address = dma->buf.dma_address; + length = dma->buf.length - 1; + + outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]); + outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]); + + if (chan >= 4) { + address >>= 1; + length >>= 1; + } + + outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]); + + outb(address, isa_dma_port[chan][ISA_DMA_ADDR]); + outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]); + + outb(length, isa_dma_port[chan][ISA_DMA_COUNT]); + outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]); + + outb(mode, isa_dma_port[chan][ISA_DMA_MODE]); + dma->invalid = 0; + } + outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]); +} + +static void isa_disable_dma(unsigned int chan, dma_t *dma) +{ + outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]); +} + +static struct dma_ops isa_dma_ops = { + .type = "ISA", + .enable = isa_enable_dma, + .disable = isa_disable_dma, + .residue = isa_get_dma_residue, +}; + +static struct resource dma_resources[] = { { + .name = "dma1", + .start = 0x0000, + .end = 0x000f +}, { + .name = "dma low page", + .start = 0x0080, + .end = 0x008f +}, { + .name = "dma2", + .start = 0x00c0, + .end = 0x00df +}, { + .name = "dma high page", + .start = 0x0480, + .end = 0x048f +} }; + +static dma_t isa_dma[8]; + +/* + * ISA DMA always starts at channel 0 + */ +static int __init isa_dma_init(void) +{ + /* + * Try to autodetect presence of an ISA DMA controller. + * We do some minimal initialisation, and check that + * channel 0's DMA address registers are writeable. + */ + outb(0xff, 0x0d); + outb(0xff, 0xda); + + /* + * Write high and low address, and then read them back + * in the same order. + */ + outb(0x55, 0x00); + outb(0xaa, 0x00); + + if (inb(0) == 0x55 && inb(0) == 0xaa) { + unsigned int chan, i; + + for (chan = 0; chan < 8; chan++) { + isa_dma[chan].d_ops = &isa_dma_ops; + isa_disable_dma(chan, NULL); + } + + outb(0x40, 0x0b); + outb(0x41, 0x0b); + outb(0x42, 0x0b); + outb(0x43, 0x0b); + + outb(0xc0, 0xd6); + outb(0x41, 0xd6); + outb(0x42, 0xd6); + outb(0x43, 0xd6); + + outb(0, 0xd4); + + outb(0x10, 0x08); + outb(0x10, 0xd0); + + /* + * Is this correct? According to my documentation, it + * doesn't appear to be. It should be: + * outb(0x3f, 0x40b); outb(0x3f, 0x4d6); + */ + outb(0x30, 0x40b); + outb(0x31, 0x40b); + outb(0x32, 0x40b); + outb(0x33, 0x40b); + outb(0x31, 0x4d6); + outb(0x32, 0x4d6); + outb(0x33, 0x4d6); + + for (i = 0; i < ARRAY_SIZE(dma_resources); i++) + request_resource(&ioport_resource, dma_resources + i); + + for (chan = 0; chan < 8; chan++) { + int ret = isa_dma_add(chan, &isa_dma[chan]); + if (ret) + pr_err("ISADMA%u: unable to register: %d\n", + chan, ret); + } + + request_dma(DMA_ISA_CASCADE, "cascade"); + } + + dma_direct_set_offset(&isa_dma_dev, PHYS_OFFSET, BUS_OFFSET, SZ_256M); + + return 0; +} +core_initcall(isa_dma_init); diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c new file mode 100644 index 0000000000..c3f280d08f --- /dev/null +++ b/arch/arm/mach-footbridge/ebsa285-pci.c @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-footbridge/ebsa285-pci.c + * + * PCI bios-type initialisation for PCI machines + * + * Bits taken from various places. + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; + +static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (dev->vendor == PCI_VENDOR_ID_CONTAQ && + dev->device == PCI_DEVICE_ID_CONTAQ_82C693) + switch (PCI_FUNC(dev->devfn)) { + case 1: return 14; + case 2: return 15; + case 3: return 12; + } + + return irqmap_ebsa285[(slot + pin) & 3]; +} + +static struct hw_pci ebsa285_pci __initdata = { + .map_irq = ebsa285_map_irq, + .nr_controllers = 1, + .ops = &dc21285_ops, + .setup = dc21285_setup, + .preinit = dc21285_preinit, + .postinit = dc21285_postinit, +}; + +static int __init ebsa285_init_pci(void) +{ + if (machine_is_ebsa285()) + pci_common_init(&ebsa285_pci); + return 0; +} + +subsys_initcall(ebsa285_init_pci); diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c new file mode 100644 index 0000000000..21cf9a358b --- /dev/null +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-footbridge/ebsa285.c + * + * EBSA285 machine fixup + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/leds.h> + +#include <asm/hardware/dec21285.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> + +#include "common.h" + +/* LEDs */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +#define XBUS_AMBER_L BIT(0) +#define XBUS_GREEN_L BIT(1) +#define XBUS_RED_L BIT(2) +#define XBUS_TOGGLE BIT(7) + +struct ebsa285_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} ebsa285_leds[] = { + { "ebsa285:amber", "cpu0", }, + { "ebsa285:green", "heartbeat", }, + { "ebsa285:red",}, +}; + +static unsigned char hw_led_state; +static void __iomem *xbus; + +static void ebsa285_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct ebsa285_led *led = container_of(cdev, + struct ebsa285_led, cdev); + + if (b == LED_OFF) + hw_led_state |= led->mask; + else + hw_led_state &= ~led->mask; + writeb(hw_led_state, xbus); +} + +static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) +{ + struct ebsa285_led *led = container_of(cdev, + struct ebsa285_led, cdev); + + return hw_led_state & led->mask ? LED_OFF : LED_FULL; +} + +static int __init ebsa285_leds_init(void) +{ + int i; + + if (!machine_is_ebsa285()) + return -ENODEV; + + xbus = ioremap(XBUS_CS2, SZ_4K); + if (!xbus) + return -ENOMEM; + + /* 3 LEDS all off */ + hw_led_state = XBUS_AMBER_L | XBUS_GREEN_L | XBUS_RED_L; + writeb(hw_led_state, xbus); + + for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { + struct ebsa285_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = ebsa285_leds[i].name; + led->cdev.brightness_set = ebsa285_led_set; + led->cdev.brightness_get = ebsa285_led_get; + led->cdev.default_trigger = ebsa285_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(ebsa285_leds_init); +#endif + +MACHINE_START(EBSA285, "EBSA285") + /* Maintainer: Russell King */ + .atag_offset = 0x100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .map_io = footbridge_map_io, + .init_early = footbridge_sched_clock, + .init_irq = footbridge_init_irq, + .init_time = footbridge_timer_init, + .restart = footbridge_restart, +MACHINE_END + diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h new file mode 100644 index 0000000000..985ad3a956 --- /dev/null +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * arch/arm/mach-footbridge/include/mach/hardware.h + * + * Copyright (C) 1998-1999 Russell King. + * + * This file contains the hardware definitions of the EBSA-285. + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* Virtual Physical Size + * 0xff800000 0x40000000 1MB X-Bus + * 0xff000000 0x7c000000 1MB PCI I/O space + * 0xfe000000 0x42000000 1MB CSR + * 0xfd000000 0x78000000 1MB Outbound write flush (not supported) + * 0xfc000000 0x79000000 1MB PCI IACK/special space + * 0xfb000000 0x7a000000 16MB PCI Config type 1 + * 0xfa000000 0x7b000000 16MB PCI Config type 0 + * 0xf9000000 0x50000000 1MB Cache flush + * 0xf0000000 0x80000000 16MB ISA memory + */ + +#define XBUS_SIZE 0x00100000 +#define XBUS_BASE 0xff800000 + +#define ARMCSR_SIZE 0x00100000 +#define ARMCSR_BASE 0xfe000000 + +#define WFLUSH_SIZE 0x00100000 +#define WFLUSH_BASE 0xfd000000 + +#define PCIIACK_SIZE 0x00100000 +#define PCIIACK_BASE 0xfc000000 + +#define PCICFG1_SIZE 0x01000000 +#define PCICFG1_BASE 0xfb000000 + +#define PCICFG0_SIZE 0x01000000 +#define PCICFG0_BASE 0xfa000000 + +#define PCIMEM_SIZE 0x01000000 +#define PCIMEM_BASE 0xf0000000 + +#define XBUS_CS2 0x40012000 + +#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000)) +#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15) +#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4)) +#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5)) +#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6)) + +#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108) /* CSR_ROMBASEMASK */ + + +/* PIC irq control */ +#define PIC_LO 0x20 +#define PIC_MASK_LO 0x21 +#define PIC_HI 0xA0 +#define PIC_MASK_HI 0xA1 + +/* GPIO pins */ +#define GPIO_CCLK 0x800 +#define GPIO_DSCLK 0x400 +#define GPIO_E2CLK 0x200 +#define GPIO_IOLOAD 0x100 +#define GPIO_RED_LED 0x080 +#define GPIO_WDTIMER 0x040 +#define GPIO_DATA 0x020 +#define GPIO_IOCLK 0x010 +#define GPIO_DONE 0x008 +#define GPIO_FAN 0x004 +#define GPIO_GREEN_LED 0x002 +#define GPIO_RESET 0x001 + +/* CPLD pins */ +#define CPLD_DS_ENABLE 8 +#define CPLD_7111_DISABLE 4 +#define CPLD_UNMUTE 2 +#define CPLD_FLASH_WR_ENABLE 1 + +#ifndef __ASSEMBLY__ +extern raw_spinlock_t nw_gpio_lock; +extern void nw_gpio_modify_op(unsigned int mask, unsigned int set); +extern void nw_gpio_modify_io(unsigned int mask, unsigned int in); +extern unsigned int nw_gpio_read(void); +extern void nw_cpld_modify(unsigned int mask, unsigned int set); +#endif + +#endif diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h new file mode 100644 index 0000000000..a5f41846ab --- /dev/null +++ b/arch/arm/mach-footbridge/include/mach/irqs.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/arm/mach-footbridge/include/mach/irqs.h + * + * Copyright (C) 1998 Russell King + * Copyright (C) 1998 Phil Blundell + * + * Changelog: + * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder + * 01-Feb-1999 PJB ISA IRQs start at 0 not 16 + */ +#include <asm/mach-types.h> + +#define NR_IRQS 36 +#define NR_DC21285_IRQS 16 + +#define _ISA_IRQ(x) (0 + (x)) +#define _ISA_INR(x) ((x) - 0) +#define _DC21285_IRQ(x) (16 + (x)) +#define _DC21285_INR(x) ((x) - 16) + +/* + * This is a list of all interrupts that the 21285 + * can generate and we handle. + */ +#define IRQ_CONRX _DC21285_IRQ(0) +#define IRQ_CONTX _DC21285_IRQ(1) +#define IRQ_TIMER1 _DC21285_IRQ(2) +#define IRQ_TIMER2 _DC21285_IRQ(3) +#define IRQ_TIMER3 _DC21285_IRQ(4) +#define IRQ_IN0 _DC21285_IRQ(5) +#define IRQ_IN1 _DC21285_IRQ(6) +#define IRQ_IN2 _DC21285_IRQ(7) +#define IRQ_IN3 _DC21285_IRQ(8) +#define IRQ_DOORBELLHOST _DC21285_IRQ(9) +#define IRQ_DMA1 _DC21285_IRQ(10) +#define IRQ_DMA2 _DC21285_IRQ(11) +#define IRQ_PCI _DC21285_IRQ(12) +#define IRQ_SDRAMPARITY _DC21285_IRQ(13) +#define IRQ_I2OINPOST _DC21285_IRQ(14) +#define IRQ_PCI_ABORT _DC21285_IRQ(15) +#define IRQ_PCI_SERR _DC21285_IRQ(16) +#define IRQ_DISCARD_TIMER _DC21285_IRQ(17) +#define IRQ_PCI_DPERR _DC21285_IRQ(18) +#define IRQ_PCI_PERR _DC21285_IRQ(19) + +#define IRQ_ISA_TIMER _ISA_IRQ(0) +#define IRQ_ISA_KEYBOARD _ISA_IRQ(1) +#define IRQ_ISA_CASCADE _ISA_IRQ(2) +#define IRQ_ISA_UART2 _ISA_IRQ(3) +#define IRQ_ISA_UART _ISA_IRQ(4) +#define IRQ_ISA_FLOPPY _ISA_IRQ(6) +#define IRQ_ISA_PRINTER _ISA_IRQ(7) +#define IRQ_ISA_RTC_ALARM _ISA_IRQ(8) +#define IRQ_ISA_2 _ISA_IRQ(9) +#define IRQ_ISA_PS2MOUSE _ISA_IRQ(12) +#define IRQ_ISA_HARDDISK1 _ISA_IRQ(14) +#define IRQ_ISA_HARDDISK2 _ISA_IRQ(15) + +#define IRQ_MASK_UART_RX (1 << 2) +#define IRQ_MASK_UART_TX (1 << 3) +#define IRQ_MASK_TIMER1 (1 << 4) +#define IRQ_MASK_TIMER2 (1 << 5) +#define IRQ_MASK_TIMER3 (1 << 6) +#define IRQ_MASK_IN0 (1 << 8) +#define IRQ_MASK_IN1 (1 << 9) +#define IRQ_MASK_IN2 (1 << 10) +#define IRQ_MASK_IN3 (1 << 11) +#define IRQ_MASK_DOORBELLHOST (1 << 15) +#define IRQ_MASK_DMA1 (1 << 16) +#define IRQ_MASK_DMA2 (1 << 17) +#define IRQ_MASK_PCI (1 << 18) +#define IRQ_MASK_SDRAMPARITY (1 << 24) +#define IRQ_MASK_I2OINPOST (1 << 25) +#define IRQ_MASK_PCI_ABORT ((1 << 29) | (1 << 30)) +#define IRQ_MASK_PCI_SERR (1 << 23) +#define IRQ_MASK_DISCARD_TIMER (1 << 27) +#define IRQ_MASK_PCI_DPERR (1 << 28) +#define IRQ_MASK_PCI_PERR (1 << 31) + +/* + * Netwinder interrupt allocations + */ +#define IRQ_NETWINDER_ETHER10 IRQ_IN0 +#define IRQ_NETWINDER_ETHER100 IRQ_IN1 +#define IRQ_NETWINDER_VIDCOMP IRQ_IN2 +#define IRQ_NETWINDER_PS2MOUSE _ISA_IRQ(5) +#define IRQ_NETWINDER_IR _ISA_IRQ(6) +#define IRQ_NETWINDER_BUTTON _ISA_IRQ(10) +#define IRQ_NETWINDER_VGA _ISA_IRQ(11) +#define IRQ_NETWINDER_SOUND _ISA_IRQ(12) + +#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD +#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) +#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY + +#define irq_canonicalize(_i) (((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i) diff --git a/arch/arm/mach-footbridge/include/mach/isa-dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h new file mode 100644 index 0000000000..b10731a1f6 --- /dev/null +++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/arm/mach-footbridge/include/mach/isa-dma.h + * + * Architecture DMA routines + * + * Copyright (C) 1998,1999 Russell King + * Copyright (C) 1998,1999 Philip Blundell + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#define MAX_DMA_CHANNELS 8 + +#define DMA_FLOPPY (2) +#define DMA_ISA_CASCADE (4) + +#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h new file mode 100644 index 0000000000..9516877667 --- /dev/null +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * arch/arm/mach-footbridge/include/mach/memory.h + * + * Copyright (C) 1996-1999 Russell King. + * + * Changelog: + * 20-Oct-1996 RMK Created + * 31-Dec-1997 RMK Fixed definitions to reduce warnings. + * 17-May-1998 DAG Added __virt_to_bus and __bus_to_virt functions. + * 21-Nov-1998 RMK Changed __virt_to_bus and __bus_to_virt to macros. + * 21-Mar-1999 RMK Added PAGE_OFFSET for co285 architecture. + * Renamed to memory.h + * Moved PAGE_OFFSET and TASK_SIZE here + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Cache flushing area. + */ +#define FLUSH_BASE 0xf9000000 + +#define FLUSH_BASE_PHYS 0x50000000 + +#endif diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h new file mode 100644 index 0000000000..28b577e29d --- /dev/null +++ b/arch/arm/mach-footbridge/include/mach/uncompress.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * arch/arm/mach-footbridge/include/mach/uncompress.h + * + * Copyright (C) 1996-1999 Russell King + */ +#include <asm/mach-types.h> + +/* + * Note! This could cause problems on the NetWinder + */ +#define DC21285_BASE ((volatile unsigned int *)0x42000160) +#define SER0_BASE ((volatile unsigned char *)0x7c0003f8) + +static inline void putc(char c) +{ + if (machine_is_netwinder()) { + while ((SER0_BASE[5] & 0x60) != 0x60) + barrier(); + SER0_BASE[0] = c; + } else { + while (DC21285_BASE[6] & 8); + DC21285_BASE[0] = c; + } +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c new file mode 100644 index 0000000000..842ddb4121 --- /dev/null +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/arch/arm/mach-footbridge/irq.c + * + * Copyright (C) 1996-2000 Russell King + * + * Changelog: + * 22-Aug-1998 RMK Restructured IRQ routines + * 03-Sep-1998 PJB Merged CATS support + * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder + * 26-Jan-1999 PJB Don't use IACK on CATS + * 16-Mar-1999 RMK Added autodetect of ISA PICs + */ +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/hardware/dec21285.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include "common.h" + +static void isa_mask_pic_lo_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq & 7); + + outb(inb(PIC_MASK_LO) | mask, PIC_MASK_LO); +} + +static void isa_ack_pic_lo_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq & 7); + + outb(inb(PIC_MASK_LO) | mask, PIC_MASK_LO); + outb(0x20, PIC_LO); +} + +static void isa_unmask_pic_lo_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq & 7); + + outb(inb(PIC_MASK_LO) & ~mask, PIC_MASK_LO); +} + +static struct irq_chip isa_lo_chip = { + .irq_ack = isa_ack_pic_lo_irq, + .irq_mask = isa_mask_pic_lo_irq, + .irq_unmask = isa_unmask_pic_lo_irq, +}; + +static void isa_mask_pic_hi_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq & 7); + + outb(inb(PIC_MASK_HI) | mask, PIC_MASK_HI); +} + +static void isa_ack_pic_hi_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq & 7); + + outb(inb(PIC_MASK_HI) | mask, PIC_MASK_HI); + outb(0x62, PIC_LO); + outb(0x20, PIC_HI); +} + +static void isa_unmask_pic_hi_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq & 7); + + outb(inb(PIC_MASK_HI) & ~mask, PIC_MASK_HI); +} + +static struct irq_chip isa_hi_chip = { + .irq_ack = isa_ack_pic_hi_irq, + .irq_mask = isa_mask_pic_hi_irq, + .irq_unmask = isa_unmask_pic_hi_irq, +}; + +static void isa_irq_handler(struct irq_desc *desc) +{ + unsigned int isa_irq = *(unsigned char *)PCIIACK_BASE; + + if (isa_irq < _ISA_IRQ(0) || isa_irq >= _ISA_IRQ(16)) { + do_bad_IRQ(desc); + return; + } + + generic_handle_irq(isa_irq); +} + +static struct resource pic1_resource = { + .name = "pic1", + .start = 0x20, + .end = 0x3f, +}; + +static struct resource pic2_resource = { + .name = "pic2", + .start = 0xa0, + .end = 0xbf, +}; + +void __init isa_init_irq(unsigned int host_irq) +{ + unsigned int irq; + + /* + * Setup, and then probe for an ISA PIC + * If the PIC is not there, then we + * ignore the PIC. + */ + outb(0x11, PIC_LO); + outb(_ISA_IRQ(0), PIC_MASK_LO); /* IRQ number */ + outb(0x04, PIC_MASK_LO); /* Slave on Ch2 */ + outb(0x01, PIC_MASK_LO); /* x86 */ + outb(0xf5, PIC_MASK_LO); /* pattern: 11110101 */ + + outb(0x11, PIC_HI); + outb(_ISA_IRQ(8), PIC_MASK_HI); /* IRQ number */ + outb(0x02, PIC_MASK_HI); /* Slave on Ch1 */ + outb(0x01, PIC_MASK_HI); /* x86 */ + outb(0xfa, PIC_MASK_HI); /* pattern: 11111010 */ + + outb(0x0b, PIC_LO); + outb(0x0b, PIC_HI); + + if (inb(PIC_MASK_LO) == 0xf5 && inb(PIC_MASK_HI) == 0xfa) { + outb(0xff, PIC_MASK_LO);/* mask all IRQs */ + outb(0xff, PIC_MASK_HI);/* mask all IRQs */ + } else { + printk(KERN_INFO "IRQ: ISA PIC not found\n"); + host_irq = (unsigned int)-1; + } + + if (host_irq != (unsigned int)-1) { + for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) { + irq_set_chip_and_handler(irq, &isa_lo_chip, + handle_level_irq); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); + } + + for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) { + irq_set_chip_and_handler(irq, &isa_hi_chip, + handle_level_irq); + irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); + } + + request_resource(&ioport_resource, &pic1_resource); + request_resource(&ioport_resource, &pic2_resource); + + irq = IRQ_ISA_CASCADE; + if (request_irq(irq, no_action, 0, "cascade", NULL)) + pr_err("Failed to request irq %u (cascade)\n", irq); + + irq_set_chained_handler(host_irq, isa_irq_handler); + + /* + * On the NetWinder, don't automatically + * enable ISA IRQ11 when it is requested. + * There appears to be a missing pull-up + * resistor on this line. + */ + if (machine_is_netwinder()) + irq_modify_status(_ISA_IRQ(11), + IRQ_NOREQUEST | IRQ_NOPROBE, IRQ_NOAUTOEN); + } +} + + diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c new file mode 100644 index 0000000000..237b828dd2 --- /dev/null +++ b/arch/arm/mach-footbridge/isa-rtc.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/arm/mach-footbridge/isa-rtc.c + * + * Copyright (C) 1998 Russell King. + * Copyright (C) 1998 Phil Blundell + * + * CATS has a real-time clock, though the evaluation board doesn't. + * + * Changelog: + * 21-Mar-1998 RMK Created + * 27-Aug-1998 PJB CATS support + * 28-Dec-1998 APH Made leds optional + * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder + * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in + */ + +#define RTC_PORT(x) (0x70+(x)) +#define RTC_ALWAYS_BCD 0 + +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/io.h> + +#include "common.h" + +void __init isa_rtc_init(void) +{ + int reg_d, reg_b; + + /* + * Probe for the RTC. + */ + reg_d = CMOS_READ(RTC_REG_D); + + /* + * make sure the divider is set + */ + CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A); + + /* + * Set control reg B + * (24 hour mode, update enabled) + */ + reg_b = CMOS_READ(RTC_REG_B) & 0x7f; + reg_b |= 2; + CMOS_WRITE(reg_b, RTC_REG_B); + + if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ && + CMOS_READ(RTC_REG_B) == reg_b) { + /* + * We have a RTC. Check the battery + */ + if ((reg_d & 0x80) == 0) + printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n"); + } +} diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c new file mode 100644 index 0000000000..723e3eae99 --- /dev/null +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-footbridge/isa-timer.c + * + * Copyright (C) 1998 Russell King. + * Copyright (C) 1998 Phil Blundell + */ +#include <linux/clockchips.h> +#include <linux/i8253.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <linux/timex.h> + +#include <asm/irq.h> +#include <asm/mach/time.h> + +#include "common.h" + +static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = dev_id; + ce->event_handler(ce); + return IRQ_HANDLED; +} + +void __init isa_timer_init(void) +{ + clocksource_i8253_init(); + + if (request_irq(i8253_clockevent.irq, pit_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "pit", &i8253_clockevent)) + pr_err("Failed to request irq %d(pit)\n", i8253_clockevent.irq); + clockevent_i8253_init(false); +} diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c new file mode 100644 index 0000000000..84caccddce --- /dev/null +++ b/arch/arm/mach-footbridge/isa.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/arch/arm/mach-footbridge/isa.c + * + * Copyright (C) 2004 Russell King. + */ +#include <linux/init.h> +#include <linux/serial_8250.h> + +#include <asm/irq.h> +#include <asm/hardware/dec21285.h> + +#include "common.h" + +static struct resource rtc_resources[] = { + [0] = { + .start = 0x70, + .end = 0x73, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = IRQ_ISA_RTC_ALARM, + .end = IRQ_ISA_RTC_ALARM, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + +static struct resource serial_resources[] = { + [0] = { + .start = 0x3f8, + .end = 0x3ff, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 0x2f8, + .end = 0x2ff, + .flags = IORESOURCE_IO, + }, +}; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .iobase = 0x3f8, + .irq = IRQ_ISA_UART, + .uartclk = 1843200, + .regshift = 0, + .iotype = UPIO_PORT, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + { + .iobase = 0x2f8, + .irq = IRQ_ISA_UART2, + .uartclk = 1843200, + .regshift = 0, + .iotype = UPIO_PORT, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + { }, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .resource = serial_resources, + .num_resources = ARRAY_SIZE(serial_resources), +}; + +static int __init footbridge_isa_init(void) +{ + int err = 0; + + /* Personal server doesn't have RTC */ + isa_rtc_init(); + err = platform_device_register(&rtc_device); + if (err) + printk(KERN_ERR "Unable to register RTC device: %d\n", err); + + err = platform_device_register(&serial_device); + if (err) + printk(KERN_ERR "Unable to register serial device: %d\n", err); + return 0; +} + +arch_initcall(footbridge_isa_init); diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c new file mode 100644 index 0000000000..5f7265b1b3 --- /dev/null +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -0,0 +1,772 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-footbridge/netwinder-hw.c + * + * Netwinder machine fixup + * + * Copyright (C) 1998, 1999 Russell King, Phil Blundell + */ +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/leds.h> + +#include <asm/hardware/dec21285.h> +#include <asm/mach-types.h> +#include <asm/setup.h> +#include <asm/system_misc.h> + +#include <asm/mach/arch.h> + +#include "common.h" + +#define IRDA_IO_BASE 0x180 +#define GP1_IO_BASE 0x338 +#define GP2_IO_BASE 0x33a + +/* + * Winbond WB83977F accessibility stuff + */ +static inline void wb977_open(void) +{ + outb(0x87, 0x370); + outb(0x87, 0x370); +} + +static inline void wb977_close(void) +{ + outb(0xaa, 0x370); +} + +static inline void wb977_wb(int reg, int val) +{ + outb(reg, 0x370); + outb(val, 0x371); +} + +static inline void wb977_ww(int reg, int val) +{ + outb(reg, 0x370); + outb(val >> 8, 0x371); + outb(reg + 1, 0x370); + outb(val & 255, 0x371); +} + +#define wb977_device_select(dev) wb977_wb(0x07, dev) +#define wb977_device_disable() wb977_wb(0x30, 0x00) +#define wb977_device_enable() wb977_wb(0x30, 0x01) + +/* + * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE + */ +DEFINE_RAW_SPINLOCK(nw_gpio_lock); +EXPORT_SYMBOL(nw_gpio_lock); + +static unsigned int current_gpio_op; +static unsigned int current_gpio_io; +static unsigned int current_cpld; + +void nw_gpio_modify_op(unsigned int mask, unsigned int set) +{ + unsigned int new_gpio, changed; + + new_gpio = (current_gpio_op & ~mask) | set; + changed = new_gpio ^ current_gpio_op; + current_gpio_op = new_gpio; + + if (changed & 0xff) + outb(new_gpio, GP1_IO_BASE); + if (changed & 0xff00) + outb(new_gpio >> 8, GP2_IO_BASE); +} +EXPORT_SYMBOL(nw_gpio_modify_op); + +static inline void __gpio_modify_io(int mask, int in) +{ + unsigned int new_gpio, changed; + int port; + + new_gpio = (current_gpio_io & ~mask) | in; + changed = new_gpio ^ current_gpio_io; + current_gpio_io = new_gpio; + + changed >>= 1; + new_gpio >>= 1; + + wb977_device_select(7); + + for (port = 0xe1; changed && port < 0xe8; changed >>= 1) { + wb977_wb(port, new_gpio & 1); + + port += 1; + new_gpio >>= 1; + } + + wb977_device_select(8); + + for (port = 0xe8; changed && port < 0xec; changed >>= 1) { + wb977_wb(port, new_gpio & 1); + + port += 1; + new_gpio >>= 1; + } +} + +void nw_gpio_modify_io(unsigned int mask, unsigned int in) +{ + /* Open up the SuperIO chip */ + wb977_open(); + + __gpio_modify_io(mask, in); + + /* Close up the EFER gate */ + wb977_close(); +} +EXPORT_SYMBOL(nw_gpio_modify_io); + +unsigned int nw_gpio_read(void) +{ + return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8; +} +EXPORT_SYMBOL(nw_gpio_read); + +/* + * Initialise the Winbond W83977F global registers + */ +static inline void wb977_init_global(void) +{ + /* + * Enable R/W config registers + */ + wb977_wb(0x26, 0x40); + + /* + * Power down FDC (not used) + */ + wb977_wb(0x22, 0xfe); + + /* + * GP12, GP11, CIRRX, IRRXH, GP10 + */ + wb977_wb(0x2a, 0xc1); + + /* + * GP23, GP22, GP21, GP20, GP13 + */ + wb977_wb(0x2b, 0x6b); + + /* + * GP17, GP16, GP15, GP14 + */ + wb977_wb(0x2c, 0x55); +} + +/* + * Initialise the Winbond W83977F printer port + */ +static inline void wb977_init_printer(void) +{ + wb977_device_select(1); + + /* + * mode 1 == EPP + */ + wb977_wb(0xf0, 0x01); +} + +/* + * Initialise the Winbond W83977F keyboard controller + */ +static inline void wb977_init_keyboard(void) +{ + wb977_device_select(5); + + /* + * Keyboard controller address + */ + wb977_ww(0x60, 0x0060); + wb977_ww(0x62, 0x0064); + + /* + * Keyboard IRQ 1, active high, edge trigger + */ + wb977_wb(0x70, 1); + wb977_wb(0x71, 0x02); + + /* + * Mouse IRQ 5, active high, edge trigger + */ + wb977_wb(0x72, 5); + wb977_wb(0x73, 0x02); + + /* + * KBC 8MHz + */ + wb977_wb(0xf0, 0x40); + + /* + * Enable device + */ + wb977_device_enable(); +} + +/* + * Initialise the Winbond W83977F Infra-Red device + */ +static inline void wb977_init_irda(void) +{ + wb977_device_select(6); + + /* + * IR base address + */ + wb977_ww(0x60, IRDA_IO_BASE); + + /* + * IRDA IRQ 6, active high, edge trigger + */ + wb977_wb(0x70, 6); + wb977_wb(0x71, 0x02); + + /* + * RX DMA - ISA DMA 0 + */ + wb977_wb(0x74, 0x00); + + /* + * TX DMA - Disable Tx DMA + */ + wb977_wb(0x75, 0x04); + + /* + * Append CRC, Enable bank selection + */ + wb977_wb(0xf0, 0x03); + + /* + * Enable device + */ + wb977_device_enable(); +} + +/* + * Initialise Winbond W83977F general purpose IO + */ +static inline void wb977_init_gpio(void) +{ + unsigned long flags; + + /* + * Set up initial I/O definitions + */ + current_gpio_io = -1; + __gpio_modify_io(-1, GPIO_DONE | GPIO_WDTIMER); + + wb977_device_select(7); + + /* + * Group1 base address + */ + wb977_ww(0x60, GP1_IO_BASE); + wb977_ww(0x62, 0); + wb977_ww(0x64, 0); + + /* + * GP10 (Orage button) IRQ 10, active high, edge trigger + */ + wb977_wb(0x70, 10); + wb977_wb(0x71, 0x02); + + /* + * GP10: Debounce filter enabled, IRQ, input + */ + wb977_wb(0xe0, 0x19); + + /* + * Enable Group1 + */ + wb977_device_enable(); + + wb977_device_select(8); + + /* + * Group2 base address + */ + wb977_ww(0x60, GP2_IO_BASE); + + /* + * Clear watchdog timer regs + * - timer disable + */ + wb977_wb(0xf2, 0x00); + + /* + * - disable LED, no mouse nor keyboard IRQ + */ + wb977_wb(0xf3, 0x00); + + /* + * - timer counting, disable power LED, disable timeouot + */ + wb977_wb(0xf4, 0x00); + + /* + * Enable group2 + */ + wb977_device_enable(); + + /* + * Set Group1/Group2 outputs + */ + raw_spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); +} + +/* + * Initialise the Winbond W83977F chip. + */ +static void __init wb977_init(void) +{ + request_region(0x370, 2, "W83977AF configuration"); + + /* + * Open up the SuperIO chip + */ + wb977_open(); + + /* + * Initialise the global registers + */ + wb977_init_global(); + + /* + * Initialise the various devices in + * the multi-IO chip. + */ + wb977_init_printer(); + wb977_init_keyboard(); + wb977_init_irda(); + wb977_init_gpio(); + + /* + * Close up the EFER gate + */ + wb977_close(); +} + +void nw_cpld_modify(unsigned int mask, unsigned int set) +{ + int msk; + + current_cpld = (current_cpld & ~mask) | set; + + nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0); + nw_gpio_modify_op(GPIO_IOLOAD, 0); + + for (msk = 8; msk; msk >>= 1) { + int bit = current_cpld & msk; + + nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0); + nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK); + } + + nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0); + nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK); + nw_gpio_modify_op(GPIO_IOLOAD, 0); +} +EXPORT_SYMBOL(nw_cpld_modify); + +static void __init cpld_init(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); +} + +static unsigned char rwa_unlock[] __initdata = +{ 0x00, 0x00, 0x6a, 0xb5, 0xda, 0xed, 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b, + 0x0d, 0x86, 0xc3, 0x61, 0xb0, 0x58, 0x2c, 0x16, 0x8b, 0x45, 0xa2, 0xd1, 0xe8, 0x74, + 0x3a, 0x9d, 0xce, 0xe7, 0x73, 0x39 }; + +#ifndef DEBUG +#define dprintk(x...) +#else +#define dprintk(x...) printk(x) +#endif + +#define WRITE_RWA(r,v) do { outb((r), 0x279); udelay(10); outb((v), 0xa79); } while (0) + +static inline void rwa010_unlock(void) +{ + int i; + + WRITE_RWA(2, 2); + mdelay(10); + + for (i = 0; i < sizeof(rwa_unlock); i++) { + outb(rwa_unlock[i], 0x279); + udelay(10); + } +} + +static inline void rwa010_read_ident(void) +{ + unsigned char si[9]; + int i, j; + + WRITE_RWA(3, 0); + WRITE_RWA(0, 128); + + outb(1, 0x279); + + mdelay(1); + + dprintk("Identifier: "); + for (i = 0; i < 9; i++) { + si[i] = 0; + for (j = 0; j < 8; j++) { + int bit; + udelay(250); + inb(0x203); + udelay(250); + bit = inb(0x203); + dprintk("%02X ", bit); + bit = (bit == 0xaa) ? 1 : 0; + si[i] |= bit << j; + } + dprintk("(%02X) ", si[i]); + } + dprintk("\n"); +} + +static inline void rwa010_global_init(void) +{ + WRITE_RWA(6, 2); // Assign a card no = 2 + + dprintk("Card no = %d\n", inb(0x203)); + + /* disable the modem section of the chip */ + WRITE_RWA(7, 3); + WRITE_RWA(0x30, 0); + + /* disable the cdrom section of the chip */ + WRITE_RWA(7, 4); + WRITE_RWA(0x30, 0); + + /* disable the MPU-401 section of the chip */ + WRITE_RWA(7, 2); + WRITE_RWA(0x30, 0); +} + +static inline void rwa010_game_port_init(void) +{ + int i; + + WRITE_RWA(7, 5); + + dprintk("Slider base: "); + WRITE_RWA(0x61, 1); + i = inb(0x203); + + WRITE_RWA(0x60, 2); + dprintk("%02X%02X (201)\n", inb(0x203), i); + + WRITE_RWA(0x30, 1); +} + +static inline void rwa010_waveartist_init(int base, int irq, int dma) +{ + int i; + + WRITE_RWA(7, 0); + + dprintk("WaveArtist base: "); + WRITE_RWA(0x61, base & 255); + i = inb(0x203); + + WRITE_RWA(0x60, base >> 8); + dprintk("%02X%02X (%X),", inb(0x203), i, base); + + WRITE_RWA(0x70, irq); + dprintk(" irq: %d (%d),", inb(0x203), irq); + + WRITE_RWA(0x74, dma); + dprintk(" dma: %d (%d)\n", inb(0x203), dma); + + WRITE_RWA(0x30, 1); +} + +static inline void rwa010_soundblaster_init(int sb_base, int al_base, int irq, int dma) +{ + int i; + + WRITE_RWA(7, 1); + + dprintk("SoundBlaster base: "); + WRITE_RWA(0x61, sb_base & 255); + i = inb(0x203); + + WRITE_RWA(0x60, sb_base >> 8); + dprintk("%02X%02X (%X),", inb(0x203), i, sb_base); + + dprintk(" irq: "); + WRITE_RWA(0x70, irq); + dprintk("%d (%d),", inb(0x203), irq); + + dprintk(" 8-bit DMA: "); + WRITE_RWA(0x74, dma); + dprintk("%d (%d)\n", inb(0x203), dma); + + dprintk("AdLib base: "); + WRITE_RWA(0x63, al_base & 255); + i = inb(0x203); + + WRITE_RWA(0x62, al_base >> 8); + dprintk("%02X%02X (%X)\n", inb(0x203), i, al_base); + + WRITE_RWA(0x30, 1); +} + +static void rwa010_soundblaster_reset(void) +{ + int i; + + outb(1, 0x226); + udelay(3); + outb(0, 0x226); + + for (i = 0; i < 5; i++) { + if (inb(0x22e) & 0x80) + break; + mdelay(1); + } + if (i == 5) + printk("SoundBlaster: DSP reset failed\n"); + + dprintk("SoundBlaster DSP reset: %02X (AA)\n", inb(0x22a)); + + for (i = 0; i < 5; i++) { + if ((inb(0x22c) & 0x80) == 0) + break; + mdelay(1); + } + + if (i == 5) + printk("SoundBlaster: DSP not ready\n"); + else { + outb(0xe1, 0x22c); + + dprintk("SoundBlaster DSP id: "); + i = inb(0x22a); + udelay(1); + i |= inb(0x22a) << 8; + dprintk("%04X\n", i); + + for (i = 0; i < 5; i++) { + if ((inb(0x22c) & 0x80) == 0) + break; + mdelay(1); + } + + if (i == 5) + printk("SoundBlaster: could not turn speaker off\n"); + + outb(0xd3, 0x22c); + } + + /* turn on OPL3 */ + outb(5, 0x38a); + outb(1, 0x38b); +} + +static void __init rwa010_init(void) +{ + rwa010_unlock(); + rwa010_read_ident(); + rwa010_global_init(); + rwa010_game_port_init(); + rwa010_waveartist_init(0x250, 3, 7); + rwa010_soundblaster_init(0x220, 0x388, 3, 1); + rwa010_soundblaster_reset(); +} + +/* + * Initialise any other hardware after we've got the PCI bus + * initialised. We may need the PCI bus to talk to this other + * hardware. + */ +static int __init nw_hw_init(void) +{ + if (machine_is_netwinder()) { + wb977_init(); + cpld_init(); + rwa010_init(); + } + return 0; +} + +__initcall(nw_hw_init); + +/* + * Older NeTTroms either do not provide a parameters + * page, or they don't supply correct information in + * the parameter page. + */ +static void __init +fixup_netwinder(struct tag *tags, char **cmdline) +{ +#ifdef CONFIG_ISAPNP + extern int isapnp_disable; + + /* + * We must not use the kernels ISAPnP code + * on the NetWinder - it will reset the settings + * for the WaveArtist chip and render it inoperable. + */ + isapnp_disable = 1; +#endif +} + +static void netwinder_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode == REBOOT_SOFT) { + /* Jump into the ROM */ + soft_restart(0x41000000); + } else { + local_irq_disable(); + local_fiq_disable(); + + /* open up the SuperIO chip */ + outb(0x87, 0x370); + outb(0x87, 0x370); + + /* aux function group 1 (logical device 7) */ + outb(0x07, 0x370); + outb(0x07, 0x371); + + /* set GP16 for WD-TIMER output */ + outb(0xe6, 0x370); + outb(0x00, 0x371); + + /* set a RED LED and toggle WD_TIMER for rebooting */ + outb(0xc4, 0x338); + } +} + +/* LEDs */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +struct netwinder_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} netwinder_leds[] = { + { "netwinder:green", "heartbeat", }, + { "netwinder:red", "cpu0", }, +}; + +/* + * The LED control in Netwinder is reversed: + * - setting bit means turn off LED + * - clearing bit means turn on LED + */ +static void netwinder_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct netwinder_led *led = container_of(cdev, + struct netwinder_led, cdev); + unsigned long flags; + u32 reg; + + raw_spin_lock_irqsave(&nw_gpio_lock, flags); + reg = nw_gpio_read(); + if (b != LED_OFF) + reg &= ~led->mask; + else + reg |= led->mask; + nw_gpio_modify_op(led->mask, reg); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); +} + +static enum led_brightness netwinder_led_get(struct led_classdev *cdev) +{ + struct netwinder_led *led = container_of(cdev, + struct netwinder_led, cdev); + unsigned long flags; + u32 reg; + + raw_spin_lock_irqsave(&nw_gpio_lock, flags); + reg = nw_gpio_read(); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); + + return (reg & led->mask) ? LED_OFF : LED_FULL; +} + +static int __init netwinder_leds_init(void) +{ + int i; + + if (!machine_is_netwinder()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) { + struct netwinder_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = netwinder_leds[i].name; + led->cdev.brightness_set = netwinder_led_set; + led->cdev.brightness_get = netwinder_led_get; + led->cdev.default_trigger = netwinder_leds[i].trigger; + + if (i == 0) + led->mask = GPIO_GREEN_LED; + else + led->mask = GPIO_RED_LED; + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(netwinder_leds_init); +#endif + +MACHINE_START(NETWINDER, "Rebel-NetWinder") + /* Maintainer: Russell King/Rebel.com */ + .atag_offset = 0x100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .fixup = fixup_netwinder, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, + .init_time = isa_timer_init, + .restart = netwinder_restart, +MACHINE_END diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c new file mode 100644 index 0000000000..e830439207 --- /dev/null +++ b/arch/arm/mach-footbridge/netwinder-pci.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-footbridge/netwinder-pci.c + * + * PCI bios-type initialisation for PCI machines + * + * Bits taken from various places. + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* + * We now use the slot ID instead of the device identifiers to select + * which interrupt is routed where. + */ +static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + switch (slot) { + case 0: /* host bridge */ + return 0; + + case 9: /* CyberPro */ + return IRQ_NETWINDER_VGA; + + case 10: /* DC21143 */ + return IRQ_NETWINDER_ETHER100; + + case 12: /* Winbond 553 */ + return IRQ_ISA_HARDDISK1; + + case 13: /* Winbond 89C940F */ + return IRQ_NETWINDER_ETHER10; + + default: + printk(KERN_ERR "PCI: unknown device in slot %s\n", + pci_name(dev)); + return 0; + } +} + +static struct hw_pci netwinder_pci __initdata = { + .map_irq = netwinder_map_irq, + .nr_controllers = 1, + .ops = &dc21285_ops, + .setup = dc21285_setup, + .preinit = dc21285_preinit, + .postinit = dc21285_postinit, +}; + +static int __init netwinder_pci_init(void) +{ + if (machine_is_netwinder()) + pci_common_init(&netwinder_pci); + return 0; +} + +subsys_initcall(netwinder_pci_init); |