diff options
Diffstat (limited to 'arch/arm/mach-omap2/opp2430_data.c')
| -rw-r--r-- | arch/arm/mach-omap2/opp2430_data.c | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c new file mode 100644 index 0000000000..ded8b566a2 --- /dev/null +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * opp2430_data.c - old-style "OPP" table for OMAP2430 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratios' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * XXX Missing 19.2MHz sys_clk rate sets. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include <linux/kernel.h> + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/* + * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on 2430-SDPs variants available. There are + * quite a few more rate combinations which could be defined. + * + * When multiple values are defined the start up will try and choose + * the fastest one. If a 'fast' value is defined, then automatically, + * the /2 one should be included as it can be used. Generally having + * more than one fast set does not make sense, as static timings need + * to be changed to change the set. The exception is the bypass + * setting which is available for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + */ +const struct prcm_config omap2430_rate_table[] = { + /* PRCM #4 - ratio2 (ES2.1) - FAST */ + {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - FAST */ + {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #4 - ratio1 (ES2.1) - SLOW */ + {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - SLOW */ + {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; |