summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-qcom
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-qcom')
-rw-r--r--arch/arm/mach-qcom/Kconfig49
-rw-r--r--arch/arm/mach-qcom/Makefile2
-rw-r--r--arch/arm/mach-qcom/platsmp.c406
3 files changed, 457 insertions, 0 deletions
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 0000000000..12a812e61c
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_QCOM
+ bool "Qualcomm Support"
+ depends on ARCH_MULTI_V7
+ select ARM_GIC
+ select ARM_AMBA
+ select PINCTRL
+ select QCOM_SCM if SMP
+ help
+ Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+config ARCH_IPQ40XX
+ bool "Enable support for IPQ40XX"
+ select CLKSRC_QCOM
+ select HAVE_ARM_ARCH_TIMER
+
+config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8909
+ bool "Enable support for MSM8909"
+ select HAVE_ARM_ARCH_TIMER
+
+config ARCH_MSM8916
+ bool "Enable support for MSM8916"
+ select HAVE_ARM_ARCH_TIMER
+ help
+ Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016).
+
+ Note that ARM64 is the main supported architecture for MSM8916.
+ The ARM32 option is intended for a few devices with signed firmware
+ that does not allow booting ARM64 kernels.
+
+config ARCH_MSM8960
+ bool "Enable support for MSM8960"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8974
+ bool "Enable support for MSM8974"
+ select HAVE_ARM_ARCH_TIMER
+
+config ARCH_MDM9615
+ bool "Enable support for MDM9615"
+ select CLKSRC_QCOM
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 0000000000..b839201c98
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
new file mode 100644
index 0000000000..eca2fe0f43
--- /dev/null
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+
+#include <asm/smp_plat.h>
+
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0
+#define SCSS_CPU1CORE_RESET 0x2d80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0x2e64
+
+#define APCS_CPU_PWR_CTL 0x04
+#define PLL_CLAMP BIT(8)
+#define CORE_PWRD_UP BIT(7)
+#define COREPOR_RST BIT(5)
+#define CORE_RST BIT(4)
+#define L2DT_SLP BIT(3)
+#define CORE_MEM_CLAMP BIT(1)
+#define CLAMP BIT(0)
+
+#define APC_PWR_GATE_CTL 0x14
+#define BHS_CNT_SHIFT 24
+#define LDO_PWR_DWN_SHIFT 16
+#define LDO_BYP_SHIFT 8
+#define BHS_SEG_SHIFT 1
+#define BHS_EN BIT(0)
+
+#define APCS_SAW2_VCTL 0x14
+#define APCS_SAW2_2_VCTL 0x1c
+
+extern void secondary_startup_arm(void);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void qcom_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
+static int scss_release_secondary(unsigned int cpu)
+{
+ struct device_node *node;
+ void __iomem *base;
+
+ node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
+ if (!node) {
+ pr_err("%s: can't find node\n", __func__);
+ return -ENXIO;
+ }
+
+ base = of_iomap(node, 0);
+ of_node_put(node);
+ if (!base)
+ return -ENOMEM;
+
+ writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
+ writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
+ mb();
+ iounmap(base);
+
+ return 0;
+}
+
+static int cortex_a7_release_secondary(unsigned int cpu)
+{
+ int ret = 0;
+ void __iomem *reg;
+ struct device_node *cpu_node, *acc_node;
+ u32 reg_val;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+ if (!acc_node) {
+ ret = -ENODEV;
+ goto out_acc;
+ }
+
+ reg = of_iomap(acc_node, 0);
+ if (!reg) {
+ ret = -ENOMEM;
+ goto out_acc_map;
+ }
+
+ /* Put the CPU into reset. */
+ reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
+ writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+ /* Turn on the BHS and set the BHS_CNT to 16 XO clock cycles */
+ writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
+ /* Wait for the BHS to settle */
+ udelay(2);
+
+ reg_val &= ~CORE_MEM_CLAMP;
+ writel(reg_val, reg + APCS_CPU_PWR_CTL);
+ reg_val |= L2DT_SLP;
+ writel(reg_val, reg + APCS_CPU_PWR_CTL);
+ udelay(2);
+
+ reg_val = (reg_val | BIT(17)) & ~CLAMP;
+ writel(reg_val, reg + APCS_CPU_PWR_CTL);
+ udelay(2);
+
+ /* Release CPU out of reset and bring it to life. */
+ reg_val &= ~(CORE_RST | COREPOR_RST);
+ writel(reg_val, reg + APCS_CPU_PWR_CTL);
+ reg_val |= CORE_PWRD_UP;
+ writel(reg_val, reg + APCS_CPU_PWR_CTL);
+
+ iounmap(reg);
+out_acc_map:
+ of_node_put(acc_node);
+out_acc:
+ of_node_put(cpu_node);
+ return ret;
+}
+
+static int kpssv1_release_secondary(unsigned int cpu)
+{
+ int ret = 0;
+ void __iomem *reg, *saw_reg;
+ struct device_node *cpu_node, *acc_node, *saw_node;
+ u32 val;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+ if (!acc_node) {
+ ret = -ENODEV;
+ goto out_acc;
+ }
+
+ saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+ if (!saw_node) {
+ ret = -ENODEV;
+ goto out_saw;
+ }
+
+ reg = of_iomap(acc_node, 0);
+ if (!reg) {
+ ret = -ENOMEM;
+ goto out_acc_map;
+ }
+
+ saw_reg = of_iomap(saw_node, 0);
+ if (!saw_reg) {
+ ret = -ENOMEM;
+ goto out_saw_map;
+ }
+
+ /* Turn on CPU rail */
+ writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
+ mb();
+ udelay(512);
+
+ /* Krait bring-up sequence */
+ val = PLL_CLAMP | L2DT_SLP | CLAMP;
+ writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+ val &= ~L2DT_SLP;
+ writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ ndelay(300);
+
+ val |= COREPOR_RST;
+ writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ val &= ~CLAMP;
+ writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ val &= ~COREPOR_RST;
+ writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(100);
+
+ val |= CORE_PWRD_UP;
+ writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ iounmap(saw_reg);
+out_saw_map:
+ iounmap(reg);
+out_acc_map:
+ of_node_put(saw_node);
+out_saw:
+ of_node_put(acc_node);
+out_acc:
+ of_node_put(cpu_node);
+ return ret;
+}
+
+static int kpssv2_release_secondary(unsigned int cpu)
+{
+ void __iomem *reg;
+ struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
+ void __iomem *l2_saw_base;
+ unsigned reg_val;
+ int ret;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+ if (!acc_node) {
+ ret = -ENODEV;
+ goto out_acc;
+ }
+
+ l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+ if (!l2_node) {
+ ret = -ENODEV;
+ goto out_l2;
+ }
+
+ saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
+ if (!saw_node) {
+ ret = -ENODEV;
+ goto out_saw;
+ }
+
+ reg = of_iomap(acc_node, 0);
+ if (!reg) {
+ ret = -ENOMEM;
+ goto out_map;
+ }
+
+ l2_saw_base = of_iomap(saw_node, 0);
+ if (!l2_saw_base) {
+ ret = -ENOMEM;
+ goto out_saw_map;
+ }
+
+ /* Turn on the BHS, turn off LDO Bypass and power down LDO */
+ reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+ mb();
+ /* wait for the BHS to settle */
+ udelay(1);
+
+ /* Turn on BHS segments */
+ reg_val |= 0x3f << BHS_SEG_SHIFT;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+ mb();
+ /* wait for the BHS to settle */
+ udelay(1);
+
+ /* Finally turn on the bypass so that BHS supplies power */
+ reg_val |= 0x3f << LDO_BYP_SHIFT;
+ writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+
+ /* enable max phases */
+ writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
+ mb();
+ udelay(50);
+
+ reg_val = COREPOR_RST | CLAMP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ reg_val &= ~CLAMP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ reg_val &= ~COREPOR_RST;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ reg_val |= CORE_PWRD_UP;
+ writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+ mb();
+
+ ret = 0;
+
+ iounmap(l2_saw_base);
+out_saw_map:
+ iounmap(reg);
+out_map:
+ of_node_put(saw_node);
+out_saw:
+ of_node_put(l2_node);
+out_l2:
+ of_node_put(acc_node);
+out_acc:
+ of_node_put(cpu_node);
+
+ return ret;
+}
+
+static DEFINE_PER_CPU(int, cold_boot_done);
+
+static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
+{
+ int ret = 0;
+
+ if (!per_cpu(cold_boot_done, cpu)) {
+ ret = func(cpu);
+ if (!ret)
+ per_cpu(cold_boot_done, cpu) = true;
+ }
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ return ret;
+}
+
+static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ return qcom_boot_secondary(cpu, scss_release_secondary);
+}
+
+static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
+}
+
+static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ return qcom_boot_secondary(cpu, kpssv1_release_secondary);
+}
+
+static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ return qcom_boot_secondary(cpu, kpssv2_release_secondary);
+}
+
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int cpu;
+
+ if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) {
+ for_each_present_cpu(cpu) {
+ if (cpu == smp_processor_id())
+ continue;
+ set_cpu_present(cpu, false);
+ }
+ pr_warn("Failed to set CPU boot address, disabling SMP\n");
+ }
+}
+
+static const struct smp_operations smp_msm8660_ops __initconst = {
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_boot_secondary = msm8660_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
+
+static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_boot_secondary = cortex_a7_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_msm8226, "qcom,msm8226-smp", &qcom_smp_cortex_a7_ops);
+CPU_METHOD_OF_DECLARE(qcom_smp_msm8909, "qcom,msm8909-smp", &qcom_smp_cortex_a7_ops);
+CPU_METHOD_OF_DECLARE(qcom_smp_msm8916, "qcom,msm8916-smp", &qcom_smp_cortex_a7_ops);
+
+static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_boot_secondary = kpssv1_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
+
+static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_boot_secondary = kpssv2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);