diff options
Diffstat (limited to 'arch/arm/mach-s3c/init.c')
| -rw-r--r-- | arch/arm/mach-s3c/init.c | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c new file mode 100644 index 0000000000..0ac079f23d --- /dev/null +++ b/arch/arm/mach-s3c/init.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2008 Simtec Electronics +// Ben Dooks <ben@simtec.co.uk> +// http://armlinux.simtec.co.uk/ +// +// S3C series CPU initialisation + +/* + * NOTE: Code in this file is not used on S3C64xx when booting with + * Device Tree support. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <linux/platform_device.h> +#include <linux/of.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "cpu.h" +#include "devs.h" + +static struct cpu_table *cpu; + +static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, + struct cpu_table *tab, + unsigned int count) +{ + for (; count != 0; count--, tab++) { + if ((idcode & tab->idmask) == (tab->idcode & tab->idmask)) + return tab; + } + + return NULL; +} + +void __init s3c_init_cpu(unsigned long idcode, + struct cpu_table *cputab, unsigned int cputab_size) +{ + cpu = s3c_lookup_cpu(idcode, cputab, cputab_size); + + if (cpu == NULL) { + printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); + panic("Unknown S3C24XX CPU"); + } + + printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); + + if (cpu->init == NULL) { + printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); + panic("Unsupported Samsung CPU"); + } + + if (cpu->map_io) + cpu->map_io(); + + pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n"); +} + +/* uart management */ +#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) +static int nr_uarts __initdata = 0; + +#ifdef CONFIG_SERIAL_SAMSUNG_UARTS +static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; +#endif + +/* s3c24xx_init_uartdevs + * + * copy the specified platform data and configuration into our central + * set of devices, before the data is thrown away after the init process. + * + * This also fills in the array passed to the serial driver for the + * early initialisation of the console. +*/ + +void __init s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no) +{ +#ifdef CONFIG_SERIAL_SAMSUNG_UARTS + struct platform_device *platdev; + struct s3c2410_uartcfg *cfgptr = uart_cfgs; + struct s3c24xx_uart_resources *resp; + int uart; + + memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); + + for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { + platdev = s3c24xx_uart_src[cfgptr->hwport]; + + resp = res + cfgptr->hwport; + + s3c24xx_uart_devs[uart] = platdev; + + platdev->name = name; + platdev->resource = resp->resources; + platdev->num_resources = resp->nr_resources; + + platdev->dev.platform_data = cfgptr; + } + + nr_uarts = no; +#endif +} + +void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + if (cpu == NULL) + return; + + if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) { + printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); + } else + (cpu->init_uarts)(cfg, no); +} +#endif + +static int __init s3c_arch_init(void) +{ + int ret; + + /* init is only needed for ATAGS based platforms */ + if (!IS_ENABLED(CONFIG_ATAGS)) + return 0; + + // do the correct init for cpu + + if (cpu == NULL) { + /* Not needed when booting with device tree. */ + if (of_have_populated_dt()) + return 0; + panic("s3c_arch_init: NULL cpu\n"); + } + + ret = (cpu->init)(); + if (ret != 0) + return ret; +#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) + ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); +#endif + return ret; +} + +arch_initcall(s3c_arch_init); |