diff options
Diffstat (limited to 'arch/arm/mach-sa1100/neponset.c')
| -rw-r--r-- | arch/arm/mach-sa1100/neponset.c | 438 |
1 files changed, 438 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c new file mode 100644 index 0000000000..0ef0ebbf31 --- /dev/null +++ b/arch/arm/mach-sa1100/neponset.c @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/arm/mach-sa1100/neponset.c + */ +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/gpio-reg.h> +#include <linux/gpio/machine.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/smc91x.h> + +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/hardware/sa1111.h> +#include <linux/sizes.h> + +#include <mach/hardware.h> +#include <mach/assabet.h> +#include <mach/neponset.h> +#include <mach/irqs.h> + +#define NEP_IRQ_SMC91X 0 +#define NEP_IRQ_USAR 1 +#define NEP_IRQ_SA1111 2 +#define NEP_IRQ_NR 3 + +#define WHOAMI 0x00 +#define LEDS 0x10 +#define SWPK 0x20 +#define IRR 0x24 +#define KP_Y_IN 0x80 +#define KP_X_OUT 0x90 +#define NCR_0 0xa0 +#define MDM_CTL_0 0xb0 +#define MDM_CTL_1 0xb4 +#define AUD_CTL 0xc0 + +#define IRR_ETHERNET (1 << 0) +#define IRR_USAR (1 << 1) +#define IRR_SA1111 (1 << 2) + +#define NCR_NGPIO 7 +#define MDM_CTL0_NGPIO 4 +#define MDM_CTL1_NGPIO 6 +#define AUD_NGPIO 2 + +extern void sa1110_mb_disable(void); + +#define to_neponset_gpio_chip(x) container_of(x, struct neponset_gpio_chip, gc) + +static const char *neponset_ncr_names[] = { + "gp01_off", "tp_power", "ms_power", "enet_osc", + "spi_kb_wk_up", "a0vpp", "a1vpp" +}; + +static const char *neponset_mdmctl0_names[] = { + "rts3", "dtr3", "rts1", "dtr1", +}; + +static const char *neponset_mdmctl1_names[] = { + "cts3", "dsr3", "dcd3", "cts1", "dsr1", "dcd1" +}; + +static const char *neponset_aud_names[] = { + "sel_1341", "mute_1341", +}; + +struct neponset_drvdata { + void __iomem *base; + struct platform_device *sa1111; + struct platform_device *smc91x; + unsigned irq_base; + struct gpio_chip *gpio[4]; +}; + +static struct gpiod_lookup_table neponset_uart1_gpio_table = { + .dev_id = "sa11x0-uart.1", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table neponset_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table neponset_pcmcia_table = { + .dev_id = "1800", + .table = { + GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct neponset_drvdata *nep; + +void neponset_ncr_frob(unsigned int mask, unsigned int val) +{ + struct neponset_drvdata *n = nep; + unsigned long m = mask, v = val; + + if (nep) + n->gpio[0]->set_multiple(n->gpio[0], &m, &v); + else + WARN(1, "nep unset\n"); +} +EXPORT_SYMBOL(neponset_ncr_frob); + +/* + * Install handler for Neponset IRQ. Note that we have to loop here + * since the ETHERNET and USAR IRQs are level based, and we need to + * ensure that the IRQ signal is deasserted before returning. This + * is rather unfortunate. + */ +static void neponset_irq_handler(struct irq_desc *desc) +{ + struct neponset_drvdata *d = irq_desc_get_handler_data(desc); + unsigned int irr; + + while (1) { + /* + * Acknowledge the parent IRQ. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); + + /* + * Read the interrupt reason register. Let's have all + * active IRQ bits high. Note: there is a typo in the + * Neponset user's guide for the SA1111 IRR level. + */ + irr = readb_relaxed(d->base + IRR); + irr ^= IRR_ETHERNET | IRR_USAR; + + if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) + break; + + /* + * Since there is no individual mask, we have to + * mask the parent IRQ. This is safe, since we'll + * recheck the register for any pending IRQs. + */ + if (irr & (IRR_ETHERNET | IRR_USAR)) { + desc->irq_data.chip->irq_mask(&desc->irq_data); + + /* + * Ack the interrupt now to prevent re-entering + * this neponset handler. Again, this is safe + * since we'll check the IRR register prior to + * leaving. + */ + desc->irq_data.chip->irq_ack(&desc->irq_data); + + if (irr & IRR_ETHERNET) + generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X); + + if (irr & IRR_USAR) + generic_handle_irq(d->irq_base + NEP_IRQ_USAR); + + desc->irq_data.chip->irq_unmask(&desc->irq_data); + } + + if (irr & IRR_SA1111) + generic_handle_irq(d->irq_base + NEP_IRQ_SA1111); + } +} + +/* Yes, we really do not have any kind of masking or unmasking */ +static void nochip_noop(struct irq_data *irq) +{ +} + +static struct irq_chip nochip = { + .name = "neponset", + .irq_ack = nochip_noop, + .irq_mask = nochip_noop, + .irq_unmask = nochip_noop, +}; + +static int neponset_init_gpio(struct gpio_chip **gcp, + struct device *dev, const char *label, void __iomem *reg, + unsigned num, bool in, const char *const * names) +{ + struct gpio_chip *gc; + + gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0, + readl_relaxed(reg), names, NULL, NULL); + if (IS_ERR(gc)) + return PTR_ERR(gc); + + *gcp = gc; + + return 0; +} + +static struct sa1111_platform_data sa1111_info = { + .disable_devs = SA1111_DEVID_PS2_MSE, +}; + +static int neponset_probe(struct platform_device *dev) +{ + struct neponset_drvdata *d; + struct resource *nep_res, *sa1111_res, *smc91x_res; + struct resource sa1111_resources[] = { + DEFINE_RES_MEM(0x40000000, SZ_8K), + { .flags = IORESOURCE_IRQ }, + }; + struct platform_device_info sa1111_devinfo = { + .parent = &dev->dev, + .name = "sa1111", + .id = 0, + .res = sa1111_resources, + .num_res = ARRAY_SIZE(sa1111_resources), + .data = &sa1111_info, + .size_data = sizeof(sa1111_info), + .dma_mask = 0xffffffffUL, + }; + struct resource smc91x_resources[] = { + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, + 0x02000000, "smc91x-regs"), + DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, + 0x02000000, "smc91x-attrib"), + { .flags = IORESOURCE_IRQ }, + }; + struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT, + }; + struct platform_device_info smc91x_devinfo = { + .parent = &dev->dev, + .name = "smc91x", + .id = 0, + .res = smc91x_resources, + .num_res = ARRAY_SIZE(smc91x_resources), + .data = &smc91x_platdata, + .size_data = sizeof(smc91x_platdata), + }; + int ret, irq; + + if (nep) + return -EBUSY; + + irq = ret = platform_get_irq(dev, 0); + if (ret < 0) + goto err_alloc; + + nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0); + smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2); + if (!nep_res || !smc91x_res || !sa1111_res) { + ret = -ENXIO; + goto err_alloc; + } + + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } + + d->base = ioremap(nep_res->start, SZ_4K); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } + + if (readb_relaxed(d->base + WHOAMI) != 0x11) { + dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n", + readb_relaxed(d->base + WHOAMI)); + ret = -ENODEV; + goto err_id; + } + + ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1); + if (ret <= 0) { + dev_err(&dev->dev, "unable to allocate %u irqs: %d\n", + NEP_IRQ_NR, ret); + if (ret == 0) + ret = -ENOMEM; + goto err_irq_alloc; + } + + d->irq_base = ret; + + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip, + handle_simple_irq); + irq_clear_status_flags(d->irq_base + NEP_IRQ_SMC91X, IRQ_NOREQUEST | IRQ_NOPROBE); + irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip, + handle_simple_irq); + irq_clear_status_flags(d->irq_base + NEP_IRQ_USAR, IRQ_NOREQUEST | IRQ_NOPROBE); + irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); + + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler_and_data(irq, neponset_irq_handler, d); + + /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ + writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); + + neponset_init_gpio(&d->gpio[0], &dev->dev, "neponset-ncr", + d->base + NCR_0, NCR_NGPIO, false, + neponset_ncr_names); + neponset_init_gpio(&d->gpio[1], &dev->dev, "neponset-mdm-ctl0", + d->base + MDM_CTL_0, MDM_CTL0_NGPIO, false, + neponset_mdmctl0_names); + neponset_init_gpio(&d->gpio[2], &dev->dev, "neponset-mdm-ctl1", + d->base + MDM_CTL_1, MDM_CTL1_NGPIO, true, + neponset_mdmctl1_names); + neponset_init_gpio(&d->gpio[3], &dev->dev, "neponset-aud-ctl", + d->base + AUD_CTL, AUD_NGPIO, false, + neponset_aud_names); + + gpiod_add_lookup_table(&neponset_uart1_gpio_table); + gpiod_add_lookup_table(&neponset_uart3_gpio_table); + gpiod_add_lookup_table(&neponset_pcmcia_table); + + /* + * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately + * something on the Neponset activates this IRQ on sleep (eth?) + */ +#if 0 + enable_irq_wake(irq); +#endif + + dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", + d->irq_base, d->irq_base + NEP_IRQ_NR - 1); + nep = d; + + /* Ensure that the memory bus request/grant signals are setup */ + sa1110_mb_disable(); + + sa1111_resources[0].parent = sa1111_res; + sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; + sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; + d->sa1111 = platform_device_register_full(&sa1111_devinfo); + + smc91x_resources[0].parent = smc91x_res; + smc91x_resources[1].parent = smc91x_res; + smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X; + smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X; + d->smc91x = platform_device_register_full(&smc91x_devinfo); + + platform_set_drvdata(dev, d); + + return 0; + + err_irq_alloc: + err_id: + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; +} + +static void neponset_remove(struct platform_device *dev) +{ + struct neponset_drvdata *d = platform_get_drvdata(dev); + int irq = platform_get_irq(dev, 0); + + if (!IS_ERR(d->sa1111)) + platform_device_unregister(d->sa1111); + if (!IS_ERR(d->smc91x)) + platform_device_unregister(d->smc91x); + + gpiod_remove_lookup_table(&neponset_pcmcia_table); + gpiod_remove_lookup_table(&neponset_uart3_gpio_table); + gpiod_remove_lookup_table(&neponset_uart1_gpio_table); + + irq_set_chained_handler(irq, NULL); + irq_free_descs(d->irq_base, NEP_IRQ_NR); + nep = NULL; + iounmap(d->base); + kfree(d); +} + +#ifdef CONFIG_PM_SLEEP +static int neponset_resume(struct device *dev) +{ + struct neponset_drvdata *d = dev_get_drvdata(dev); + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(d->gpio); i++) { + ret = gpio_reg_resume(d->gpio[i]); + if (ret) + break; + } + + return ret; +} + +static const struct dev_pm_ops neponset_pm_ops = { + .resume_noirq = neponset_resume, + .restore_noirq = neponset_resume, +}; +#define PM_OPS &neponset_pm_ops +#else +#define PM_OPS NULL +#endif + +static struct platform_driver neponset_device_driver = { + .probe = neponset_probe, + .remove_new = neponset_remove, + .driver = { + .name = "neponset", + .pm = PM_OPS, + }, +}; + +static int __init neponset_init(void) +{ + return platform_driver_register(&neponset_device_driver); +} + +subsys_initcall(neponset_init); |