diff options
Diffstat (limited to 'arch/arm/mach-socfpga/ocram.c')
| -rw-r--r-- | arch/arm/mach-socfpga/ocram.c | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c new file mode 100644 index 0000000000..9f1a249deb --- /dev/null +++ b/arch/arm/mach-socfpga/ocram.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright Altera Corporation (C) 2016. All rights reserved. + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "core.h" + +#define ALTR_OCRAM_CLEAR_ECC 0x00000018 +#define ALTR_OCRAM_ECC_EN 0x00000019 + +void socfpga_init_ocram_ecc(void) +{ + struct device_node *np; + void __iomem *mapped_ocr_edac_addr; + + /* Find the OCRAM EDAC device tree node */ + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc"); + if (!np) { + pr_err("Unable to find socfpga-ocram-ecc\n"); + return; + } + + mapped_ocr_edac_addr = of_iomap(np, 0); + of_node_put(np); + if (!mapped_ocr_edac_addr) { + pr_err("Unable to map OCRAM ecc regs.\n"); + return; + } + + /* Clear any pending OCRAM ECC interrupts, then enable ECC */ + writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr); + writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr); + + iounmap(mapped_ocr_edac_addr); +} + +/* Arria10 OCRAM Section */ +#define ALTR_A10_ECC_CTRL_OFST 0x08 +#define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0)) +#define ALTR_A10_ECC_INITA BIT(16) + +#define ALTR_A10_ECC_INITSTAT_OFST 0x0C +#define ALTR_A10_ECC_INITCOMPLETEA BIT(0) +#define ALTR_A10_ECC_INITCOMPLETEB BIT(8) + +#define ALTR_A10_ECC_ERRINTEN_OFST 0x10 +#define ALTR_A10_ECC_SERRINTEN BIT(0) + +#define ALTR_A10_ECC_INTSTAT_OFST 0x20 +#define ALTR_A10_ECC_SERRPENA BIT(0) +#define ALTR_A10_ECC_DERRPENA BIT(8) +#define ALTR_A10_ECC_ERRPENA_MASK (ALTR_A10_ECC_SERRPENA | \ + ALTR_A10_ECC_DERRPENA) +/* ECC Manager Defines */ +#define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94 +#define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98 +#define A10_SYSMGR_ECC_INTMASK_OCRAM BIT(1) + +#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000 + +static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr) +{ + u32 value = readl(ioaddr); + + value |= bit_mask; + writel(value, ioaddr); +} + +static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr) +{ + u32 value = readl(ioaddr); + + value &= ~bit_mask; + writel(value, ioaddr); +} + +static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr) +{ + u32 value = readl(ioaddr); + + return (value & bit_mask) ? 1 : 0; +} + +/* + * This function uses the memory initialization block in the Arria10 ECC + * controller to initialize/clear the entire memory data and ECC data. + */ +static int altr_init_memory_port(void __iomem *ioaddr) +{ + int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US; + + ecc_set_bits(ALTR_A10_ECC_INITA, (ioaddr + ALTR_A10_ECC_CTRL_OFST)); + while (limit--) { + if (ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA, + (ioaddr + ALTR_A10_ECC_INITSTAT_OFST))) + break; + udelay(1); + } + if (limit < 0) + return -EBUSY; + + /* Clear any pending ECC interrupts */ + writel(ALTR_A10_ECC_ERRPENA_MASK, + (ioaddr + ALTR_A10_ECC_INTSTAT_OFST)); + + return 0; +} + +void socfpga_init_arria10_ocram_ecc(void) +{ + struct device_node *np; + int ret = 0; + void __iomem *ecc_block_base; + + if (!sys_manager_base_addr) { + pr_err("SOCFPGA: sys-mgr is not initialized\n"); + return; + } + + /* Find the OCRAM EDAC device tree node */ + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc"); + if (!np) { + pr_err("Unable to find socfpga-a10-ocram-ecc\n"); + return; + } + + /* Map the ECC Block */ + ecc_block_base = of_iomap(np, 0); + of_node_put(np); + if (!ecc_block_base) { + pr_err("Unable to map OCRAM ECC block\n"); + return; + } + + /* Disable ECC */ + writel(ALTR_A10_OCRAM_ECC_EN_CTL, + sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_SET_OFST); + ecc_clear_bits(ALTR_A10_ECC_SERRINTEN, + (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST)); + ecc_clear_bits(ALTR_A10_OCRAM_ECC_EN_CTL, + (ecc_block_base + ALTR_A10_ECC_CTRL_OFST)); + + /* Ensure all writes complete */ + wmb(); + + /* Use HW initialization block to initialize memory for ECC */ + ret = altr_init_memory_port(ecc_block_base); + if (ret) { + pr_err("ECC: cannot init OCRAM PORTA memory\n"); + goto exit; + } + + /* Enable ECC */ + ecc_set_bits(ALTR_A10_OCRAM_ECC_EN_CTL, + (ecc_block_base + ALTR_A10_ECC_CTRL_OFST)); + ecc_set_bits(ALTR_A10_ECC_SERRINTEN, + (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST)); + writel(ALTR_A10_OCRAM_ECC_EN_CTL, + sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_CLR_OFST); + + /* Ensure all writes complete */ + wmb(); +exit: + iounmap(ecc_block_base); +} |