diff options
Diffstat (limited to 'arch/arm/mach-versatile/Kconfig')
| -rw-r--r-- | arch/arm/mach-versatile/Kconfig | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig new file mode 100644 index 0000000000..b1519b4dc0 --- /dev/null +++ b/arch/arm/mach-versatile/Kconfig @@ -0,0 +1,326 @@ +# SPDX-License-Identifier: GPL-2.0 +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARM_AMBA + select ARM_TIMER_SP804 + select ARM_VIC + select CLKSRC_VERSATILE + select CPU_ARM926T + select CLK_ICST + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select VERSATILE_FPGA_IRQ + help + This enables support for ARM Ltd Versatile board. + +menuconfig ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 + depends on CPU_LITTLE_ENDIAN || ARCH_MULTI_V6 + select ARM_AMBA + select CMA + select DMA_CMA + select HAVE_TCM + select CLK_ICST + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_INTEGRATOR_CM + select VERSATILE_FPGA_IRQ + help + Support for ARM's Integrator platform. + +if ARCH_INTEGRATOR + +config ARCH_INTEGRATOR_AP + bool "Support Integrator/AP and Integrator/PP2 platforms" + select INTEGRATOR_AP_TIMER + select SERIAL_AMBA_PL010 if TTY + select SERIAL_AMBA_PL010_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator/AP and + Integrator/PP2 platforms. + +config INTEGRATOR_IMPD1 + bool "Include support for Integrator/IM-PD1" + depends on ARCH_INTEGRATOR_AP + select ARM_VIC + select GPIO_PL061 + select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + The IM-PD1 is an add-on logic module for the Integrator which + allows ARM(R) Ltd PrimeCells to be developed and evaluated. + The IM-PD1 can be found on the Integrator/PP2 platform. + +config INTEGRATOR_CM720T + bool "Integrator/CM720T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM720T + +config INTEGRATOR_CM920T + bool "Integrator/CM920T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM920T + +config INTEGRATOR_CM922T_XA10 + bool "Integrator/CM922T-XA10 core module" + depends on ARCH_MULTI_V4T + depends on ARCH_INTEGRATOR_AP + select CPU_ARM922T + +config INTEGRATOR_CM926EJS + bool "Integrator/CM926EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CM10200E_REV0 + bool "Integrator/CM10200E rev.0 core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020 + +config INTEGRATOR_CM10200E + bool "Integrator/CM10200E core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020E + +config INTEGRATOR_CM10220E + bool "Integrator/CM10220E core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1022 + +config INTEGRATOR_CM1026EJS + bool "Integrator/CM1026EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1026 + +config INTEGRATOR_CM1136JFS + bool "Integrator/CM1136JF-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_INTEGRATOR_CP + bool "Support Integrator/CP platform" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 + select ARM_TIMER_SP804 + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator CP platform. + +config INTEGRATOR_CT926 + bool "Integrator/CT926 (ARM926EJ-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CTB36 + bool "Integrator/CTB36 (ARM1136JF-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_CINTEGRATOR + depends on ARCH_INTEGRATOR_CP + def_bool y + +endif + +menuconfig ARCH_REALVIEW + bool "ARM Ltd. RealView family" + depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CLK_SP810 + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_PATA_PLATFORM + select HAVE_TCM + select CLK_ICST + select MACH_REALVIEW_EB if ARCH_MULTI_V5 + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_REALVIEW + help + This enables support for ARM Ltd RealView boards. + +if ARCH_REALVIEW + +config MACH_REALVIEW_EB + bool "Support RealView(R) Emulation Baseboard" + select ARM_GIC + select CPU_ARM926T if ARCH_MULTI_V5 + help + Include support for the ARM(R) RealView(R) Emulation Baseboard + platform. On an ARMv5 kernel, this will include support for + the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least + one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore + core tile options should be enabled. + +config REALVIEW_EB_ARM1136 + bool "Support ARM1136J(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select CPU_V6 + help + Enable support for the ARM1136 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM1176 + bool "Support ARM1176JZ(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + help + Enable support for the ARM1176 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_A9MP + bool "Support Multicore Cortex-A9 Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 + help + Enable support for the Cortex-A9MPCore tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM11MP + bool "Support ARM11MPCore Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select HAVE_SMP + help + Enable support for the ARM11MPCore tile fitted to the Realview(R) + Emulation Baseboard platform. + +config MACH_REALVIEW_PB11MP + bool "Support RealView(R) Platform Baseboard for ARM11MPCore" + depends on ARCH_MULTI_V6 + select HAVE_SMP + help + Include support for the ARM(R) RealView(R) Platform Baseboard for + the ARM11MPCore. This platform has an on-board ARM11MPCore and has + support for PCI-E and Compact Flash. + +# ARMv6 CPU without K extensions, but does have the new exclusive ops +config MACH_REALVIEW_PB1176 + bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + depends on ARCH_MULTI_V6 + select CPU_V6 + select HAVE_TCM + help + Include support for the ARM(R) RealView(R) Platform Baseboard for + ARM1176JZF-S. + +config MACH_REALVIEW_PBA8 + bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + depends on ARCH_MULTI_V7 + help + Include support for the ARM(R) RealView Platform Baseboard for + Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has + support for PCI-E and Compact Flash. + +config MACH_REALVIEW_PBX + bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" + depends on ARCH_MULTI_V7 + select ZONE_DMA + help + Include support for the ARM(R) RealView(R) Platform Baseboard + Explore. + +endif + +menuconfig ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select ARM_TIMER_SP804 + select GPIOLIB + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select CLK_ICST + select NO_IOPORT_MAP + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VEXPRESS + select POWER_SUPPLY + select REGULATOR if MMC_ARMMMCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG + help + This option enables support for systems using Cortex processor based + ARM core and logic (FPGA) tiles on the Versatile Express motherboard, + for example: + + - CoreTile Express A5x2 (V2P-CA5s) + - CoreTile Express A9x4 (V2P-CA9) + - CoreTile Express A15x2 (V2P-CA15) + - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs + (Soft Macrocell Models) + - Versatile Express RTSMs (Models) + + You must boot using a Flattened Device Tree in order to use these + platforms. The traditional (ATAGs) boot method is not usable on + these boards with this option. + +if ARCH_VEXPRESS + +config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + bool "Enable A5 and A9 only errata work-arounds" + default y + select ARM_ERRATA_643719 if SMP + select ARM_ERRATA_720789 + select PL310_ERRATA_753970 if CACHE_L2X0 + help + Provides common dependencies for Versatile Express platforms + based on Cortex-A5 and Cortex-A9 processors. In order to + build a working kernel, you must also enable relevant core + tile support or Flattened Device Tree based support options. + +config ARCH_VEXPRESS_DCSCB + bool "Dual Cluster System Control Block (DCSCB) support" + depends on MCPM + select ARM_CCI400_PORT_CTRL + help + Support for the Dual Cluster System Configuration Block (DCSCB). + This is needed to provide CPU and cluster power management + on RTSM implementing big.LITTLE. + +config ARCH_VEXPRESS_SPC + bool "Versatile Express Serial Power Controller (SPC)" + select PM_OPP + help + The TC2 (A15x2 A7x3) versatile express core tile integrates a logic + block called Serial Power Controller (SPC) that provides the interface + between the dual cluster test-chip and the M3 microcontroller that + carries out power management. + +config ARCH_VEXPRESS_TC2_PM + bool "Versatile Express TC2 power management" + depends on MCPM + select ARM_CCI400_PORT_CTRL + select ARCH_VEXPRESS_SPC + select ARM_CPU_SUSPEND + help + Support for CPU and cluster power management on Versatile Express + with a TC2 (A15x2 A7x3) big.LITTLE core tile. + +endif |