diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts new file mode 100644 index 000000000..3b0ed9305 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018-2019 NXP + * + * Shaohui Xie <Shaohui.Xie@nxp.com> + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A QDS Board"; + compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; + + aliases { + emi1-slot1 = &ls1046mdio_s1; + emi1-slot2 = &ls1046mdio_s2; + emi1-slot4 = &ls1046mdio_s4; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + qsgmii-s2-p1 = &qsgmii_phy_s2_p1; + qsgmii-s2-p2 = &qsgmii_phy_s2_p2; + qsgmii-s2-p3 = &qsgmii_phy_s2_p3; + qsgmii-s2-p4 = &qsgmii_phy_s2_p4; + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + sgmii-s1-p1 = &sgmii_phy_s1_p1; + sgmii-s1-p2 = &sgmii_phy_s1_p2; + sgmii-s1-p3 = &sgmii_phy_s1_p3; + sgmii-s1-p4 = &sgmii_phy_s1_p4; + sgmii-s4-p1 = &sgmii_phy_s4_p1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst25wf040b", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25s64", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x1 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + big-endian; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@2,0 { + compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + reg = <0x2 0x0 0x0000100>; + ranges = <0 2 0 0x100>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + qflash0: flash@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + }; +}; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmii_phy_s4_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&sgmii_phy_s1_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&sgmii_phy_s1_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + phy-handle = <&sgmii_phy_s1_p1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* DTSEC10/10GEC2 */ + phy-handle = <&sgmii_phy_s1_p2>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + #address-cells = <1>; + #size-cells = <1>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1046mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1046mdio1: mdio@1 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1046mdio_s1: mdio@2 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmii_phy_s1_p2: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmii_phy_s1_p3: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmii_phy_s1_p4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 2 */ + ls1046mdio_s2: mdio@3 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + }; + + /* Slot 4 */ + ls1046mdio_s4: mdio@5 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; |