diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 341 |
1 files changed, 341 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts new file mode 100644 index 0000000000..0d8def2766 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2019-2021 TQ-Systems GmbH + */ + +/dts-v1/; + +#include "imx8mq-tqma8mq.dtsi" +#include "mba8mx.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx"; + compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + + aliases { + eeprom0 = &eeprom3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + }; + + extcon_usbotg: extcon-usbotg0 { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regotgvbus>; + regulator-name = "MBA8MQ_OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&btn2 { + gpios = <&gpio3 17 GPIO_ACTIVE_LOW>; +}; + +&gpio_leds { + led3 { + label = "led3"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c1 { + expander2: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + mpcie-rst-hog { + gpio-hog; + gpios = <13 0>; + output-high; + line-name = "MPCIE_RST#"; + }; + }; +}; + +&irqsteer { + status = "okay"; +}; + +&led2 { + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; +}; + +&pcie0 { + reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&pcie0_refclk>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; + status = "okay"; +}; + +/* + * miniPCIe, also usable for cards with USB. Therefore configure the reset as + * static gpio hog. + */ +&pcie1 { + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&pcie1_refclk>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&clk IMX8MQ_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>, + <&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>, + <&clk IMX8MQ_AUDIO_PLL2_OUT>; +}; + +&tlv320aic3x04 { + clock-names = "mclk"; + clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>; +}; + +&uart1 { + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; +}; + +&uart2 { + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; +}; + +/* console */ +&uart3 { + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; +}; + +&usb3_phy0 { + vbus-supply = <®_otg_vbus>; + status = "okay"; +}; + +&usb_dwc3_0 { + /* we implement dual role but not full featured OTG */ + extcon = <&extcon_usbotg>; + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = <MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x0000004e>, + <MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x0000004e>, + <MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x0000004e>, + <MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x0000004e>; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = <MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x0000004e>, + <MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x0000004e>, + <MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x0000004e>, + <MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x0000004e>; + }; + + pinctrl_expander: expandergrp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0xd6>; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3>, + <MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23>, + <MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>, + <MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>, + <MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>, + <MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>, + <MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, + <MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, + <MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, + <MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>, + <MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>, + <MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>, + <MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>, + <MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f>; + }; + + pinctrl_gpiobutton: gpiobuttongrp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41>, + <MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x41>, + <MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41>; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x41>, + <MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41>, + <MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000067>, + <MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000067>; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16 0x40000067>, + <MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17 0x40000067>; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000067>, + <MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000067>; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18 0x40000067>, + <MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19 0x40000067>; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT 0x16>; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT 0x16>; + }; + + pinctrl_regotgvbus: reggotgvbusgrp { + /* USB1 OTG PWR as GPIO */ + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x06>; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = <MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0xc1>; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = <MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6>, + <MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0xd6>, + <MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0xd6>, + <MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6>, + <MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6>, + <MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6>, + <MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = <MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x79>, + <MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x79>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = <MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x79>, + <MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x79>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = <MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79>, + <MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = <MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x79>, + <MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x79>; + }; + + pinctrl_usbcon0: usb0congrp { + /* ID: floating / high: device, low: host -> use PU */ + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xe6>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83>, + <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3>, + <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3>, + <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3>, + <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3>, + <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3>, + <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85>, + <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5>, + <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5>, + <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5>, + <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5>, + <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5>, + <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f>, + <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7>, + <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7>, + <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7>, + <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7>, + <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7>, + <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = <MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41>; + }; +}; |