diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell/armada-37xx.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 540 |
1 files changed, 540 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi new file mode 100644 index 000000000..e300145ad --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell Armada 37xx family of SoCs. + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell Armada 37xx SoC"; + compatible = "marvell,armada3700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The PSCI firmware region depicted below is the default one + * and should be updated by the bootloader. + */ + psci-area@4000000 { + reg = <0 0x4000000 0 0x200000>; + no-map; + }; + + tee@4400000 { + reg = <0 0x4400000 0 0x1000000>; + no-map; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0>; + clocks = <&nb_periph_clk 16>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + internal-regs@d0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 32M internal register @ 0xd000_0000 */ + ranges = <0x0 0x0 0xd0000000 0x2000000>; + + wdt: watchdog@8300 { + compatible = "marvell,armada-3700-wdt"; + reg = <0x8300 0x40>; + marvell,system-controller = <&cpu_misc>; + clocks = <&xtalclk>; + }; + + cpu_misc: system-controller@d000 { + compatible = "marvell,armada-3700-cpu-misc", + "syscon"; + reg = <0xd000 0x1000>; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0xA00>; + clocks = <&nb_periph_clk 7>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <4>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11000 0x24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&nb_periph_clk 10>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + i2c1: i2c@11080 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11080 0x24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&nb_periph_clk 9>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + avs: avs@11500 { + compatible = "marvell,armada-3700-avs", + "syscon"; + reg = <0x11500 0x40>; + }; + + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", + "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; + + uart0: serial@12000 { + compatible = "marvell,armada-3700-uart"; + reg = <0x12000 0x18>; + clocks = <&uartclk 0>; + interrupts = + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; + status = "disabled"; + }; + + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + reg = <0x12200 0x30>; + clocks = <&uartclk 1>; + interrupts = + <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "uart-tx", "uart-rx"; + status = "disabled"; + }; + + nb_periph_clk: nb-periph-clk@13000 { + compatible = "marvell,armada-3700-periph-clock-nb", + "syscon"; + reg = <0x13000 0x100>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; + }; + + sb_periph_clk: sb-periph-clk@18000 { + compatible = "marvell,armada-3700-periph-clock-sb"; + reg = <0x18000 0x100>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; + }; + + tbg: tbg@13200 { + compatible = "marvell,armada-3700-tbg-clock"; + reg = <0x13200 0x100>; + clocks = <&xtalclk>; + #clock-cells = <1>; + }; + + pinctrl_nb: pinctrl@13800 { + compatible = "marvell,armada3710-nb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x13800 0x100>, <0x13C00 0x20>; + /* MPP1[19:0] */ + gpionb: gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nb 0 0 36>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + }; + + xtalclk: xtal-clk { + compatible = "marvell,armada-3700-xtal-clock"; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; + }; + + spi_cs1_pins: spi-cs1-pins { + groups = "spi_cs1"; + function = "spi"; + }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; + + mmc_pins: mmc-pins { + groups = "emmc_nb"; + function = "emmc"; + }; + }; + + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&xtalclk>; + clock-names = "xtal"; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + /* MPP2[23:0] */ + gpiosb: gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 30>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + }; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + + smi_pins: smi-pins { + groups = "smi"; + function = "smi"; + }; + + sdio_pins: sdio-pins { + groups = "sdio_sb"; + function = "sdio"; + }; + + pcie_reset_pins: pcie-reset-pins { + groups = "pcie1"; /* this actually controls "pcie1_reset" */ + function = "gpio"; + }; + + pcie_clkreq_pins: pcie-clkreq-pins { + groups = "pcie1_clkreq"; + function = "pcie"; + }; + }; + + eth0: ethernet@30000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x30000 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 8>; + status = "disabled"; + }; + + mdio: mdio@32004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x32004 0x4>; + }; + + eth1: ethernet@40000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x40000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 7>; + status = "disabled"; + }; + + usb3: usb@58000 { + compatible = "marvell,armada3700-xhci", + "generic-xhci"; + reg = <0x58000 0x4000>; + marvell,usb-misc-reg = <&usb32_syscon>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; + status = "disabled"; + }; + + usb2_utmi_otg_phy: phy@5d000 { + compatible = "marvell,a3700-utmi-otg-phy"; + reg = <0x5d000 0x800>; + marvell,usb-misc-reg = <&usb32_syscon>; + #phy-cells = <0>; + }; + + usb32_syscon: system-controller@5d800 { + compatible = "marvell,armada-3700-usb2-host-device-misc", + "syscon"; + reg = <0x5d800 0x800>; + }; + + usb2: usb@5e000 { + compatible = "marvell,armada-3700-ehci"; + reg = <0x5e000 0x1000>; + marvell,usb-misc-reg = <&usb2_syscon>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; + status = "disabled"; + }; + + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,a3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", + "syscon"; + reg = <0x5f800 0x800>; + }; + + xor@60900 { + compatible = "marvell,armada-3700-xor"; + reg = <0x60900 0x100>, + <0x60b00 0x100>; + + xor10 { + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + xor11 { + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + crypto: crypto@90000 { + compatible = "inside-secure,safexcel-eip97ies"; + reg = <0x90000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&nb_periph_clk 15>; + }; + + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + + sdhci1: mmc@d0000 { + compatible = "marvell,armada-3700-sdhci", + "marvell,sdhci-xenon"; + reg = <0xd0000 0x300>, + <0x1e808 0x4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; + status = "disabled"; + }; + + sdhci0: mmc@d8000 { + compatible = "marvell,armada-3700-sdhci", + "marvell,sdhci-xenon"; + reg = <0xd8000 0x300>, + <0x17808 0x4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; + status = "disabled"; + }; + + sata: sata@e0000 { + compatible = "marvell,armada-3700-ahci"; + reg = <0xe0000 0x178>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 1>; + phys = <&comphy2 0>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + gic: interrupt-controller@1d00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1d00000 0x10000>, /* GICD */ + <0x1d40000 0x40000>, /* GICR */ + <0x1d80000 0x2000>, /* GICC */ + <0x1d90000 0x2000>, /* GICH */ + <0x1da0000 0x20000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pcie0: pcie@d0070000 { + compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + status = "disabled"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + clocks = <&sb_periph_clk 13>; + msi-parent = <&pcie0>; + msi-controller; + /* + * The 128 MiB address range [0xe8000000-0xf0000000] is + * dedicated for PCIe and can be assigned to 8 windows + * with size a power of two. Use one 64 KiB window for + * IO at the end and the remaining seven windows + * (totaling 127 MiB) for MEM. + */ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0x00000000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + max-link-speed = <2>; + phys = <&comphy1 0>; + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; +}; |