diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 387 |
1 files changed, 387 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi new file mode 100644 index 0000000000..c864df9ec8 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell 8040 MACCHIATOBin"; + compatible = "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + maximum-power-milliwatt = <2000>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + maximum-power-milliwatt = <2000>; + }; + + sfp_eth3: sfp-eth3 { + /* CON13,14 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + maximum-power-milliwatt = <2000>; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + sfpp1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + sfp_1g_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + }; +}; + +/* J25 UART header */ +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <4>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, + <&cp0_comphy2 0>, <&cp0_comphy3 0>; + phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", + "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy"; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* CPM Lane 5 - U29 */ + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_sdhci0 { + /* U6 */ + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_utmi { + status = "okay"; +}; + +&cp0_usb3_0 { + /* J38? - USB2.0 only */ + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_usb3_1 { + /* J38? - USB2.0 only */ + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; +}; + +&cp1_eth1 { + /* CPS Lane 0 - J5 (Gigabit RJ45) */ + status = "okay"; + /* Network PHY */ + phy = <&ge_phy>; + phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 1>; +}; + +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + +&cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_uart0_pins: uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; +}; + +/* J27 UART header */ +&cp1_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_uart0_pins>; + status = "okay"; +}; + +&cp1_sata0 { + status = "okay"; + + /* CPS Lane 1 - U32 */ + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + + /* CPS Lane 3 - U31 */ + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_utmi { + status = "okay"; +}; + +&cp1_usb3_0 { + /* CPS Lane 2 - CON7 */ + phys = <&cp1_comphy2 0>, <&cp1_utmi0>; + phy-names = "cp1-usb3h0-comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; |