diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts new file mode 100644 index 000000000..4efc534b1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Longcheer L8150"; + compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */ + /delete-node/ wcnss@89300000; + + wcnss_mem: wcnss@8b600000 { + reg = <0x0 0x8b600000 0x0 0x600000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reg_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "ctp"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&ctp_pwr_en_default>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_default>; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc156_accel"; + reg = <0x10>; + + /* + * For some reason the interrupt line is usually not connected + * to the BMC156. However, there are two pads next to the chip + * that can be shorted to make it work if needed. + * + * interrupt-parent = <&tlmm>; + * interrupts = <116 IRQ_TYPE_EDGE_RISING>; + */ + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc156_magn"; + reg = <0x12>; + + interrupt-parent = <&tlmm>; + interrupts = <113 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + light-sensor@23 { + compatible = "liteon,ltr559"; + reg = <0x23>; + proximity-near-level = <75>; + + interrupt-parent = <&tlmm>; + interrupts = <115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&light_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + + interrupt-parent = <&tlmm>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>, + <22 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_ctp>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_default>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; /* Allow sleeping */ + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; /* Touchscreen */ + }; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + non-removable; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + camera_flash_default: camera-flash-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ctp_pwr_en_default: ctp-pwr-en-default-state { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gyro_int_default: gyro-int-default-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + light_int_default: light-int-default-state { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + magn_int_default: magn-int-default-state { + pins = "gpio113"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tp_int_default: tp-int-default-state { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; |