diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sa8775p-ride.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 832 |
1 files changed, 832 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts new file mode 100644 index 000000000..81a7eeb9c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -0,0 +1,832 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + model = "Qualcomm SA8775P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; + i2c11 = &i2c11; + i2c18 = &i2c18; + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + spi16 = &spi16; + ufshc1 = &ufs_mem_hc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet0 { + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <1000>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + device_type = "ethernet-phy"; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + + sgmii_phy1: phy@a { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0xa>; + device_type = "ethernet-phy"; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy1>; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <1000>; + + status = "okay"; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio3"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pcie0 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; |