summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts')
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts86
1 files changed, 86 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
new file mode 100644
index 0000000000..6a99816600
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2024 Uwe Kleine-König
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "Qnap TS-433-4G NAS System 4-Bay";
+ compatible = "qnap,ts433", "rockchip,rk3568";
+};
+
+&gmac0 {
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+ assigned-clock-rates = <0>, <125000000>;
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus>;
+ rx_delay = <0x2f>;
+ tx_delay = <0x3c>;
+ status = "okay";
+};
+
+&i2c0 {
+ pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "microcrystal,rv8263";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ };
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x1 {
+ /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */
+ reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ status = "okay";
+};
+
+/*
+ * Pins available on CN3 connector at TTL voltage level (3V3).
+ * ,_ _.
+ * |1234| 1=TX 2=VCC
+ * `----' 3=RX 4=GND
+ */
+&uart2 {
+ status = "okay";
+};