diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts')
-rw-r--r-- | arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 54 |
1 files changed, 21 insertions, 33 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index eadbdd9ffe..a34e0df2ab 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -1,9 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * https://beagleplay.org/ * - * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation */ /dts-v1/; @@ -29,7 +29,6 @@ i2c3 = &main_i2c3; i2c4 = &wkup_i2c0; i2c5 = &mcu_i2c0; - mdio-gpio0 = &mdio0; mmc0 = &sdhci0; mmc1 = &sdhci1; mmc2 = &sdhci2; @@ -231,27 +230,6 @@ }; }; - /* Workaround for errata i2329 - just use mdio bitbang */ - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&mdio0_pins_default>; - gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */ - <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */ - #address-cells = <1>; - #size-cells = <0>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - }; - - cpsw3g_phy1: ethernet-phy@1 { - reg = <1>; - reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>; - reset-assert-us = <25>; - reset-deassert-us = <60000>; /* T2 */ - }; - }; }; &main_pmx0 { @@ -312,8 +290,8 @@ mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */ - AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */ + AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ >; }; @@ -573,11 +551,13 @@ }; &usbss0 { + bootph-all; ti,vbus-divider; status = "okay"; }; &usb0 { + bootph-all; dr_mode = "peripheral"; }; @@ -611,8 +591,20 @@ }; &cpsw3g_mdio { - /* Workaround for errata i2329 - Use mdio bitbang */ - status = "disabled"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <25>; + reset-deassert-us = <60000>; /* T2 */ + }; }; &main_gpio0 { @@ -827,7 +819,6 @@ bootph-all; pinctrl-names = "default"; pinctrl-0 = <&emmc_pins_default>; - ti,driver-strength-ohm = <50>; disable-wp; status = "okay"; }; @@ -840,7 +831,6 @@ vmmc-supply = <&vdd_3v3_sd>; vqmmc-supply = <&vdd_sd_dv>; - ti,driver-strength-ohm = <50>; disable-wp; cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; cd-debounce-delay-ms = <100>; @@ -852,12 +842,10 @@ vmmc-supply = <&wlan_en>; pinctrl-names = "default"; pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>; - bus-width = <4>; non-removable; ti,fails-without-test-cd; cap-power-off-card; keep-power-in-suspend; - ti,driver-strength-ohm = <50>; assigned-clocks = <&k3_clks 157 158>; assigned-clock-parents = <&k3_clks 157 160>; #address-cells = <1>; |