diff options
Diffstat (limited to 'arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso')
| -rw-r--r-- | arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 37 |
1 files changed, 34 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index f88b71f5b0..a7b8fffad4 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -94,6 +94,7 @@ pinctrl-0 = <&pinctrl_usb0_default>; phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + assigned-clock-rates = <250000000>, <20000000>; }; &dwc3_0 { @@ -122,7 +123,7 @@ bus-width = <4>; }; -&gem3 { /* required by spec */ +&gem3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; @@ -149,9 +150,28 @@ }; }; -&pinctrl0 { /* required by spec */ +&pinctrl0 { status = "okay"; + pinctrl_gpio0_default: gpio0-default { + conf { + groups = "gpio0_38_grp"; + bias-pull-up; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "gpio0_38_grp"; + function = "gpio0"; + }; + + conf-tx { + pins = "MIO38"; + bias-disable; + output-enable; + }; + }; + pinctrl_uart1_default: uart1-default { conf { groups = "uart1_9_grp"; @@ -168,6 +188,7 @@ conf-tx { pins = "MIO36"; bias-disable; + output-enable; }; mux { @@ -190,7 +211,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { conf { groups = "gpio0_24_grp", "gpio0_25_grp"; slew-rate = <SLEW_RATE_SLOW>; @@ -219,6 +240,7 @@ conf-bootstrap { pins = "MIO71", "MIO73", "MIO75"; bias-disable; + output-enable; low-power-disable; }; @@ -226,6 +248,7 @@ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", "MIO69"; bias-disable; + output-enable; low-power-enable; }; @@ -234,6 +257,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; mux-mdio { @@ -264,6 +288,7 @@ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + output-enable; drive-strength = <4>; slew-rate = <SLEW_RATE_SLOW>; }; @@ -302,6 +327,12 @@ }; }; +&gpio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &uart1 { status = "okay"; pinctrl-names = "default"; |