1 files changed, 129 insertions, 0 deletions
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
new file mode 100644
index 0000000000..ceb368d33b
--- /dev/null
+++ b/arch/arm64/include/asm/cache.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+#define L1_CACHE_SHIFT		(6)
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define CLIDR_LOUU_SHIFT	27
+#define CLIDR_LOC_SHIFT		24
+#define CLIDR_LOUIS_SHIFT	21
+
+#define CLIDR_LOUU(clidr)	(((clidr) >> CLIDR_LOUU_SHIFT) & 0x7)
+#define CLIDR_LOC(clidr)	(((clidr) >> CLIDR_LOC_SHIFT) & 0x7)
+#define CLIDR_LOUIS(clidr)	(((clidr) >> CLIDR_LOUIS_SHIFT) & 0x7)
+
+/* Ctypen, bits[3(n - 1) + 2 : 3(n - 1)], for n = 1 to 7 */
+#define CLIDR_CTYPE_SHIFT(level)	(3 * (level - 1))
+#define CLIDR_CTYPE_MASK(level)		(7 << CLIDR_CTYPE_SHIFT(level))
+#define CLIDR_CTYPE(clidr, level)	\
+	(((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level))
+
+/* Ttypen, bits [2(n - 1) + 34 : 2(n - 1) + 33], for n = 1 to 7 */
+#define CLIDR_TTYPE_SHIFT(level)	(2 * ((level) - 1) + CLIDR_EL1_Ttypen_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_DMA_MINALIGN	(128)
+#define ARCH_KMALLOC_MINALIGN	(8)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/kasan-enabled.h>
+
+#include <asm/cputype.h>
+#include <asm/mte-def.h>
+#include <asm/sysreg.h>
+
+#ifdef CONFIG_KASAN_SW_TAGS
+#define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
+#elif defined(CONFIG_KASAN_HW_TAGS)
+static inline unsigned int arch_slab_minalign(void)
+{
+	return kasan_hw_tags_enabled() ? MTE_GRANULE_SIZE :
+					 __alignof__(unsigned long long);
+}
+#define arch_slab_minalign() arch_slab_minalign()
+#endif
+
+#define CTR_L1IP(ctr)		SYS_FIELD_GET(CTR_EL0, L1Ip, ctr)
+
+#define ICACHEF_ALIASING	0
+#define ICACHEF_VPIPT		1
+extern unsigned long __icache_flags;
+
+/*
+ * Whilst the D-side always behaves as PIPT on AArch64, aliasing is
+ * permitted in the I-cache.
+ */
+static inline int icache_is_aliasing(void)
+{
+	return test_bit(ICACHEF_ALIASING, &__icache_flags);
+}
+
+static __always_inline int icache_is_vpipt(void)
+{
+	return test_bit(ICACHEF_VPIPT, &__icache_flags);
+}
+
+static inline u32 cache_type_cwg(void)
+{
+	return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype());
+}
+
+#define __read_mostly __section(".data..read_mostly")
+
+static inline int cache_line_size_of_cpu(void)
+{
+	u32 cwg = cache_type_cwg();
+
+	return cwg ? 4 << cwg : ARCH_DMA_MINALIGN;
+}
+
+int cache_line_size(void);
+
+#define dma_get_cache_alignment	cache_line_size
+
+/*
+ * Read the effective value of CTR_EL0.
+ *
+ * According to ARM ARM for ARMv8-A (ARM DDI 0487C.a),
+ * section D10.2.33 "CTR_EL0, Cache Type Register" :
+ *
+ * CTR_EL0.IDC reports the data cache clean requirements for
+ * instruction to data coherence.
+ *
+ *  0 - dcache clean to PoU is required unless :
+ *     (CLIDR_EL1.LoC == 0) || (CLIDR_EL1.LoUIS == 0 && CLIDR_EL1.LoUU == 0)
+ *  1 - dcache clean to PoU is not required for i-to-d coherence.
+ *
+ * This routine provides the CTR_EL0 with the IDC field updated to the
+ * effective state.
+ */
+static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void)
+{
+	u32 ctr = read_cpuid_cachetype();
+
+	if (!(ctr & BIT(CTR_EL0_IDC_SHIFT))) {
+		u64 clidr = read_sysreg(clidr_el1);
+
+		if (CLIDR_LOC(clidr) == 0 ||
+		    (CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0))
+			ctr |= BIT(CTR_EL0_IDC_SHIFT);
+	}
+
+	return ctr;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif