diff options
Diffstat (limited to '')
524 files changed, 24981 insertions, 3204 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b5df38c2a0..456e8680e1 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1516,6 +1516,9 @@ config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG config ARCH_SUPPORTS_CRASH_DUMP def_bool y +config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION + def_bool CRASH_CORE + config TRANS_TABLE def_bool y depends on HIBERNATION || KEXEC_CORE diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6069120199..24335565ba 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -244,6 +244,18 @@ config ARCH_NPCM General support for NPCM8xx BMC (Arbel). Nuvoton NPCM8xx BMC based on the Cortex A35. +config ARCH_PENSANDO + bool "AMD Pensando Platforms" + help + This enables support for the ARMv8 based AMD Pensando SoC + family to include the Elba SoC. + + AMD Pensando SoCs support a range of Distributed Services + Cards in PCIe format installed into servers. The Elba + SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable + cores for a minimal latency/jitter datapath, and network + interfaces up to 200 Gb/s. + config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 26b8c7630a..9a2d3723cd 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image install zinstall: $(call cmd,install) -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ - $(if $(CONFIG_COMPAT_VDSO), \ - $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@) - archprepare: $(Q)$(MAKE) $(build)=arch/arm64/tools kapi ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) @@ -205,6 +199,9 @@ ifdef CONFIG_COMPAT_VDSO endif endif +vdso-install-y += arch/arm64/kernel/vdso/vdso.so.dbg +vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so + include $(srctree)/scripts/Makefile.defconf PHONY += virtconfig diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 3b0ad54062..3aca6787a1 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -38,6 +38,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts new file mode 100644 index 0000000000..dbce61b355 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>. + */ + +/dts-v1/; + +#include "sun50i-h616-bigtreetech-cb1.dtsi" + +/ { + model = "BigTreeTech CB1"; + compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi new file mode 100644 index 0000000000..1fed2b46cf --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = &rtl8189ftv; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + }; + }; + + reg_vcc5v: regulator-vcc5v { + /* board wide 5V supply from carrier boards */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc33_wifi: vcc33-wifi { + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + post-power-on-delay-ms = <200>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dldo1>; + /* Card detection pin is not connected */ + broken-cd; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + + rtl8189ftv: wifi@1 { + reg = <1>; + }; +}; + +&r_i2c { + status = "okay"; + + axp313a: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators{ + reg_dcdc1: dcdc1 { + regulator-name = "vdd-gpu-sys"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-always-on; + }; + + reg_dcdc2: dcdc2 { + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <200>; + regulator-always-on; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_aldo1: aldo1 { + regulator-name = "vcc-1v8-pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_dldo1: dldo1 { + regulator-name = "vcc-3v3-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts new file mode 100644 index 0000000000..832f08b2b2 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>. + */ + +/dts-v1/; + +#include "sun50i-h616-bigtreetech-cb1.dtsi" + +/ { + model = "BigTreeTech Pi"; + compatible = "bigtreetech,pi", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index 74aed0d232..d549d277d9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -133,6 +133,13 @@ #reset-cells = <1>; }; + sid: efuse@3006000 { + compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid"; + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + watchdog: watchdog@30090a0 { compatible = "allwinner,sun50i-h616-wdt", "allwinner,sun6i-a31-wdt"; diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile index 68103a8b0e..8502cc2afb 100644 --- a/arch/arm64/boot/dts/amd/Makefile +++ b/arch/arm64/boot/dts/amd/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_PENSANDO) += elba-asic.dtb dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts index 21149acb6b..1a65f1ec18 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts @@ -64,7 +64,6 @@ reg = <0>; spi-max-frequency = <20000000>; voltage-ranges = <3200 3400>; - pl022,hierarchy = <0>; pl022,interface = <0>; pl022,com-mode = <0x0>; pl022,rx-level-trig = <0>; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts index 99205ae1b4..52f8d36295 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts @@ -76,7 +76,6 @@ reg = <0>; spi-max-frequency = <20000000>; voltage-ranges = <3200 3400>; - pl022,hierarchy = <0>; pl022,interface = <0>; pl022,com-mode = <0x0>; pl022,rx-level-trig = <0>; diff --git a/arch/arm64/boot/dts/amd/elba-16core.dtsi b/arch/arm64/boot/dts/amd/elba-16core.dtsi new file mode 100644 index 0000000000..568bcc39ce --- /dev/null +++ b/arch/arm64/boot/dts/amd/elba-16core.dtsi @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +/* + * Copyright 2020-2023 Advanced Micro Devices, Inc. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { cpu = <&cpu0>; }; + core1 { cpu = <&cpu1>; }; + core2 { cpu = <&cpu2>; }; + core3 { cpu = <&cpu3>; }; + }; + + cluster1 { + core0 { cpu = <&cpu4>; }; + core1 { cpu = <&cpu5>; }; + core2 { cpu = <&cpu6>; }; + core3 { cpu = <&cpu7>; }; + }; + + cluster2 { + core0 { cpu = <&cpu8>; }; + core1 { cpu = <&cpu9>; }; + core2 { cpu = <&cpu10>; }; + core3 { cpu = <&cpu11>; }; + }; + + cluster3 { + core0 { cpu = <&cpu12>; }; + core1 { cpu = <&cpu13>; }; + core2 { cpu = <&cpu14>; }; + core3 { cpu = <&cpu15>; }; + }; + }; + + /* CLUSTER 0 */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x2>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x3>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + /* CLUSTER 1 */ + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x102>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x103>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + /* CLUSTER 2 */ + cpu8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + cpu9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + cpu10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x202>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + cpu11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x203>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + l2_2: l2-cache2 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + /* CLUSTER 3 */ + cpu12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + cpu13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + cpu14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x302>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + cpu15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x303>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + l2_3: l2-cache3 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amd/elba-asic-common.dtsi b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi new file mode 100644 index 0000000000..46b6c6783f --- /dev/null +++ b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +/* + * Copyright 2020-2022 Advanced Micro Devices, Inc. + */ + +&ahb_clk { + clock-frequency = <400000000>; +}; + +&emmc_clk { + clock-frequency = <200000000>; +}; + +&flash_clk { + clock-frequency = <400000000>; +}; + +&ref_clk { + clock-frequency = <156250000>; +}; + +&qspi { + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <2>; + m25p,fast-read; + cdns,read-delay = <0>; + cdns,tshsl-ns = <0>; + cdns,tsd2d-ns = <0>; + cdns,tchsh-ns = <0>; + cdns,tslch-ns = <0>; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-hw-reset; + status = "okay"; +}; + +&wdt0 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <4>; + cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>, + <&porta 7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amd/elba-asic.dts b/arch/arm64/boot/dts/amd/elba-asic.dts new file mode 100644 index 0000000000..c3f4da2f74 --- /dev/null +++ b/arch/arm64/boot/dts/amd/elba-asic.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +/* + * Device Tree file for AMD Pensando Elba Board. + * + * Copyright 2020-2022 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +#include "elba.dtsi" +#include "elba-16core.dtsi" +#include "elba-asic-common.dtsi" +#include "elba-flash-parts.dtsi" + +/ { + model = "AMD Pensando Elba Board"; + compatible = "amd,pensando-elba-ortano", "amd,pensando-elba"; + + aliases { + serial0 = &uart0; + spi0 = &spi0; + spi1 = &qspi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi new file mode 100644 index 0000000000..cf761a05a8 --- /dev/null +++ b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +/* + * Copyright 2020-2023 Advanced Micro Devices, Inc. + */ + +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "rsvd"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + label = "flash"; + reg = <0x10000 0xfff0000>; + }; + + partition@f0000 { + label = "golduenv"; + reg = <0xf0000 0x10000>; + }; + + partition@100000 { + label = "boot0"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "golduboot"; + reg = <0x180000 0x200000>; + }; + + partition@380000 { + label = "brdcfg0"; + reg = <0x380000 0x10000>; + }; + + partition@390000 { + label = "brdcfg1"; + reg = <0x390000 0x10000>; + }; + + partition@400000 { + label = "goldfw"; + reg = <0x400000 0x3c00000>; + }; + + partition@4010000 { + label = "fwmap"; + reg = <0x4010000 0x20000>; + }; + + partition@4030000 { + label = "fwsel"; + reg = <0x4030000 0x20000>; + }; + + partition@4090000 { + label = "bootlog"; + reg = <0x4090000 0x20000>; + }; + + partition@40b0000 { + label = "panicbuf"; + reg = <0x40b0000 0x20000>; + }; + + partition@40d0000 { + label = "uservars"; + reg = <0x40d0000 0x20000>; + }; + + partition@4200000 { + label = "uboota"; + reg = <0x4200000 0x400000>; + }; + + partition@4600000 { + label = "ubootb"; + reg = <0x4600000 0x400000>; + }; + + partition@4a00000 { + label = "mainfwa"; + reg = <0x4a00000 0x1000000>; + }; + + partition@5a00000 { + label = "mainfwb"; + reg = <0x5a00000 0x1000000>; + }; + + partition@6a00000 { + label = "diaguboot"; + reg = <0x6a00000 0x400000>; + }; + + partition@6e00000 { + label = "spare"; + reg = <0x6e00000 0x1200000>; + }; + + partition@8000000 { + label = "diagfw"; + reg = <0x8000000 0x7fe0000>; + }; + + partition@ffe0000 { + label = "ubootenv"; + reg = <0xffe0000 0x10000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amd/elba.dtsi b/arch/arm64/boot/dts/amd/elba.dtsi new file mode 100644 index 0000000000..674890cf2a --- /dev/null +++ b/arch/arm64/boot/dts/amd/elba.dtsi @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +/* + * Copyright 2020-2022 Advanced Micro Devices, Inc. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "dt-bindings/interrupt-controller/arm-gic.h" + +/ { + model = "Elba ASIC Board"; + compatible = "amd,pensando-elba"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + dma-coherent; + + ahb_clk: oscillator0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + emmc_clk: oscillator2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + flash_clk: oscillator3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + ref_clk: oscillator4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@400 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x400 0x0 0x100>; + clocks = <&ahb_clk>; + #address-cells = <1>; + #size-cells = <0>; + i2c-sda-hold-time-ns = <480>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + wdt0: watchdog@1400 { + compatible = "snps,dw-wdt"; + reg = <0x0 0x1400 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + qspi: spi@2400 { + compatible = "amd,pensando-elba-qspi", "cdns,qspi-nor"; + reg = <0x0 0x2400 0x0 0x400>, + <0x0 0x7fff0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&flash_clk>; + cdns,fifo-depth = <1024>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x7fff0000>; + status = "disabled"; + }; + + spi0: spi@2800 { + compatible = "amd,pensando-elba-spi"; + reg = <0x0 0x2800 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + amd,pensando-elba-syscon = <&syscon>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <2>; + status = "disabled"; + }; + + gpio0: gpio@4000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x4000 0x0 0x78>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <8>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + }; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <8>; + }; + }; + + uart0: serial@4800 { + compatible = "ns16550a"; + reg = <0x0 0x4800 0x0 0x100>; + clocks = <&ref_clk>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + gic: interrupt-controller@800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ + <0x0 0xa00000 0x0 0x200000>, /* GICR */ + <0x0 0x60000000 0x0 0x2000>, /* GICC */ + <0x0 0x60010000 0x0 0x1000>, /* GICH */ + <0x0 0x60020000 0x0 0x2000>; /* GICV */ + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <3>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + /* + * Elba specific pre-ITS is enabled using the + * existing property socionext,synquacer-pre-its + */ + gic_its: msi-controller@820000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x820000 0x0 0x10000>; + msi-controller; + #msi-cells = <1>; + socionext,synquacer-pre-its = + <0xc00000 0x1000000>; + }; + }; + + emmc: mmc@30440000 { + compatible = "amd,pensando-elba-sd4hc", "cdns,sd4hc"; + reg = <0x0 0x30440000 0x0 0x10000>, + <0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ + clocks = <&emmc_clk>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + cdns,phy-input-delay-sd-highspeed = <0x4>; + cdns,phy-input-delay-legacy = <0x4>; + cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; + cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; + mmc-ddr-1_8v; + status = "disabled"; + }; + + syscon: syscon@307c0000 { + compatible = "amd,pensando-elba-syscon", "syscon"; + reg = <0x0 0x307c0000 0x0 0x3000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 8b6f57a948..cc8b34bd58 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad402.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb @@ -17,6 +18,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb @@ -72,6 +74,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi index 1423d4a791..a03c7667d2 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/amlogic,t7-pwrc.h> / { interrupt-parent = <&gic>; @@ -118,6 +119,11 @@ sm: secure-monitor { compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,t7-pwrc"; + #power-domain-cells = <1>; + }; }; soc { @@ -143,6 +149,28 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + watchdog@2100 { + compatible = "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,t7-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x0064>, + <0x0 0x40c0 0x0 0x0220>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 157>; + }; + }; + uart_a: serial@78000 { compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart"; reg = <0x0 0x78000 0x0 0x18>; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts new file mode 100644 index 0000000000..1c20516fa6 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 SberDevices + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> + */ + +/dts-v1/; + +#include "meson-a1.dtsi" + +/ { + compatible = "amlogic,ad402", "amlogic,a1"; + model = "Amlogic Meson A1 AD402 Development Board"; + + aliases { + serial0 = &uart_AO_B; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x8000000>; + }; + + reserved-memory { + /* 3 MiB reserved for Amlogic Trust OS (BL32) */ + secos_reserved: secos@3d00000 { + reg = <0x0 0x03d00000 0x0 0x300000>; + no-map; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + battery_4v2: regulator-battery-4v2 { + compatible = "regulator-fixed"; + regulator-name = "4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vddq_1v35: regulator-vddq-1v35 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&battery_4v2>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&battery_4v2>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_1v8: regulator-vddio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; +}; + +/* Bluetooth HCI H4 */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; +}; + +&uart_AO_B { + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_1v8>; +}; + +&spifc { + status = "okay"; + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + spi_nand@0 { + compatible = "spi-nand"; + status = "okay"; + reg = <0>; + spi-max-frequency = <96000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&usb2_phy1 { + phy-supply = <&vcc_3v3>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; +}; + +&sd_emmc { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_1v8>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index 96225c4211..648e7f4942 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -3,9 +3,13 @@ * Copyright (c) 2019 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/amlogic,a1-pll-clkc.h> +#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h> #include <dt-bindings/gpio/meson-a1-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/meson-a1-power.h> +#include <dt-bindings/reset/amlogic,meson-a1-reset.h> / { compatible = "amlogic,a1"; @@ -41,6 +45,15 @@ }; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc_periphs CLKID_OTP>; + #address-cells = <1>; + #size-cells = <1>; + secure-monitor = <&sm>; + power-domains = <&pwrc PWRC_OTP_ID>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -66,7 +79,6 @@ pwrc: power-controller { compatible = "amlogic,meson-a1-pwrc"; #power-domain-cells = <1>; - status = "okay"; }; }; @@ -76,6 +88,16 @@ #size-cells = <2>; ranges; + spifc: spi@fd000400 { + compatible = "amlogic,a1-spifc"; + reg = <0x0 0xfd000400 0x0 0x290>; + clocks = <&clkc_periphs CLKID_SPIFC>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&pwrc PWRC_SPIFC_ID>; + status = "disabled"; + }; + apb: bus@fe000000 { compatible = "simple-bus"; reg = <0x0 0xfe000000 0x0 0x1000000>; @@ -83,7 +105,6 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; - reset: reset-controller@0 { compatible = "amlogic,meson-a1-reset"; reg = <0x0 0x0 0x0 0x8c>; @@ -105,6 +126,196 @@ gpio-ranges = <&periphs_pinctrl 0 0 62>; }; + i2c0_f11_pins: i2c0-f11 { + mux { + groups = "i2c0_sck_f11", + "i2c0_sda_f12"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_f9_pins: i2c0-f9 { + mux { + groups = "i2c0_sck_f9", + "i2c0_sda_f10"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_x_pins: i2c1-x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_a_pins: i2c1-a { + mux { + groups = "i2c1_sck_a", + "i2c1_sda_a"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x0_pins: i2c2-x0 { + mux { + groups = "i2c2_sck_x0", + "i2c2_sda_x1"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x15_pins: i2c2-x15 { + mux { + groups = "i2c2_sck_x15", + "i2c2_sda_x16"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a4_pins: i2c2-a4 { + mux { + groups = "i2c2_sck_a4", + "i2c2_sda_a5"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a8_pins: i2c2-a8 { + mux { + groups = "i2c2_sck_a8", + "i2c2_sda_a9"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_x_pins: i2c3-x { + mux { + groups = "i2c3_sck_x", + "i2c3_sda_x"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_f_pins: i2c3-f { + mux { + groups = "i2c3_sck_f", + "i2c3_sda_f"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-pull-down; + }; + }; + + sdio_pins: sdio { + mux0 { + groups = "sdcard_d0_x", + "sdcard_d1_x", + "sdcard_d2_x", + "sdcard_d3_x", + "sdcard_cmd_x"; + function = "sdcard"; + bias-pull-up; + }; + + mux1 { + groups = "sdcard_clk_x"; + function = "sdcard"; + bias-disable; + }; + }; + + sdio_clk_gate_pins: sdio-clk-gate { + mux { + groups = "sdcard_clk_x"; + function = "sdcard"; + bias-pull-down; + }; + }; + + spifc_pins: spifc { + mux { + groups = "spif_mo", + "spif_mi", + "spif_clk", + "spif_cs", + "spif_hold_n", + "spif_wp_n"; + function = "spif"; + }; + }; + }; + + gpio_intc: interrupt-controller@440 { + compatible = "amlogic,meson-a1-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x0440 0x0 0x14>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <49 50 51 52 53 54 55 56>; + }; + + clkc_periphs: clock-controller@800 { + compatible = "amlogic,a1-peripherals-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + + i2c0: i2c@1400 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1400 0x0 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + power-domains = <&pwrc PWRC_I2C_ID>; }; uart_AO: serial@1c00 { @@ -127,14 +338,148 @@ status = "disabled"; }; - gpio_intc: interrupt-controller@0440 { - compatible = "amlogic,meson-a1-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0x0440 0x0 0x14>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = - <49 50 51 52 53 54 55 56>; + saradc: adc@2c00 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x2c00 0x0 0x48>; + #io-channel-cells = <1>; + power-domains = <&pwrc PWRC_I2C_ID>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_periphs CLKID_SARADC_EN>, + <&clkc_periphs CLKID_SARADC>, + <&clkc_periphs CLKID_SARADC_SEL>; + clock-names = "clkin", "core", + "adc_clk", "adc_sel"; + status = "disabled"; + }; + + i2c1: i2c@5c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x5c00 0x0 0x20>; + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c2: i2c@6800 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6800 0x0 0x20>; + interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c3: i2c@6c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6c00 0x0 0x20>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + usb2_phy1: phy@4000 { + compatible = "amlogic,a1-usb2-phy"; + clocks = <&clkc_periphs CLKID_USB_PHY_IN>; + clock-names = "xtal"; + reg = <0x0 0x4000 0x0 0x60>; + resets = <&reset RESET_USBPHY>; + reset-names = "phy"; + #phy-cells = <0>; + power-domains = <&pwrc PWRC_USB_ID>; + }; + + hwrng: rng@5118 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x5118 0x0 0x4>; + power-domains = <&pwrc PWRC_OTP_ID>; + }; + + sec_AO: ao-secure@5a20 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x5a20 0x0 0x140>; + amlogic,has-chip-id; + }; + + clkc_pll: pll-clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + + sd_emmc: sd@10000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x10000 0x0 0x800>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", + "clkin0", + "clkin1"; + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>; + assigned-clock-parents = <&xtal>; + resets = <&reset RESET_SD_EMMC_A>; + power-domains = <&pwrc PWRC_SD_EMMC_ID>; + status = "disabled"; + }; + }; + + usb: usb@fe004400 { + status = "disabled"; + compatible = "amlogic,meson-a1-usb-ctrl"; + reg = <0x0 0xfe004400 0x0 0xa0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc_periphs CLKID_USB_CTRL>, + <&clkc_periphs CLKID_USB_BUS>, + <&clkc_periphs CLKID_USB_CTRL_IN>; + clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl"; + resets = <&reset RESET_USBCTRL>; + reset-name = "usb_ctrl"; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc3: usb@ff400000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff400000 0x0 0x100000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,parkmode-disable-ss-quirk; + }; + + dwc2: usb@ff500000 { + compatible = "amlogic,meson-a1-usb", "snps,dwc2"; + reg = <0x0 0xff500000 0x0 0x40000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + clocks = <&clkc_periphs CLKID_USB_PHY>; + clock-names = "otg"; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 768d0ed78d..a49aa62e3f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1908,6 +1908,19 @@ resets = <&reset RESET_SD_EMMC_C>; }; + nfc: nand-controller@7800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>, + <0x0 0x7000 0x0 0x800>; + reg-names = "nfc", "emmc"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + }; + usb2_phy1: phy@9020 { compatible = "amlogic,meson-gxl-usb2-phy"; #phy-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi index 6a1f4dcf64..e732df3f31 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi @@ -15,10 +15,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>, + <&clkc_audio AUD_CLKID_MST_A_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -26,10 +26,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>, + <&clkc_audio AUD_CLKID_MST_B_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -37,10 +37,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>, + <&clkc_audio AUD_CLKID_MST_C_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; }; @@ -195,8 +195,7 @@ }; tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x300 0x0 0x40>; sound-name-prefix = "TDMIN_A"; resets = <&clkc_audio AUD_RESET_TDMIN_A>; @@ -211,8 +210,7 @@ }; tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x340 0x0 0x40>; sound-name-prefix = "TDMIN_B"; resets = <&clkc_audio AUD_RESET_TDMIN_B>; @@ -227,8 +225,7 @@ }; tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x380 0x0 0x40>; sound-name-prefix = "TDMIN_C"; resets = <&clkc_audio AUD_RESET_TDMIN_C>; @@ -243,8 +240,7 @@ }; tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x3c0 0x0 0x40>; sound-name-prefix = "TDMIN_LB"; resets = <&clkc_audio AUD_RESET_TDMIN_LB>; @@ -272,12 +268,12 @@ status = "disabled"; }; - spdifout: audio-controller@480 { + spdifout_a: audio-controller@480 { compatible = "amlogic,g12a-spdifout", "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; + sound-name-prefix = "SPDIFOUT_A"; clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; clock-names = "pclk", "mclk"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 4b5d11e563..8355ddd7e9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -8,6 +8,8 @@ #include "meson-g12a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> / { compatible = "amlogic,u200", "amlogic,g12a"; @@ -18,6 +20,26 @@ ethernet0 = ðmac; }; + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + #sound-dai-cells = <0>; + sound-name-prefix = "10U2"; + }; + + spdif_dir: audio-codec-0 { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + sound-name-prefix = "DIR"; + }; + + spdif_dit: audio-codec-1 { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + sound-name-prefix = "DIT"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -147,6 +169,216 @@ regulator-boot-on; regulator-always-on; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "U200"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&tdmin_lb>, <&dioo2133>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3", + "SPDIFOUT_B IN 0", "FRDDR_A OUT 4", + "SPDIFOUT_B IN 1", "FRDDR_B OUT 4", + "SPDIFOUT_B IN 2", "FRDDR_C OUT 4", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_C IN 3", "TDM_A Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 3", "TDM_A Capture", + "TDMIN_LB IN 4", "TDM_B Capture", + "TDMIN_LB IN 5", "TDM_C Capture", + "TDMIN_LB IN 0", "TDM_A Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 3", "SPDIFIN Capture", + "TODDR_B IN 3", "SPDIFIN Capture", + "TODDR_C IN 3", "SPDIFIN Capture", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "10U2 INL", "ACODEC LOLP", + "10U2 INR", "ACODEC LORP", + "Lineout", "10U2 OUTL", + "Lineout", "10U2 OUTR"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* Connected to the WIFI/BT chip */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "dsp_a"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&toacodec TOACODEC_IN_A>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* Connected to the onboard AD82584F DAC */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* 8ch HDMI interface */ + dai-link-8 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + }; + + /* spdif hdmi and coax output */ + dai-link-9 { + sound-dai = <&spdifout_a>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-10 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-11 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + /* internal codec glue */ + dai-link-12 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + + /* spdif coax input */ + dai-link-13 { + sound-dai = <&spdifin>; + + codec { + sound-dai = <&spdif_dir>; + }; + }; + }; +}; + +&acodec { + status = "okay"; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -163,6 +395,10 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; @@ -191,6 +427,10 @@ clock-latency = <50000>; }; +&clkc_audio { + status = "okay"; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -203,6 +443,18 @@ phy-mode = "rmii"; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -288,6 +540,95 @@ vqmmc-supply = <&flash_1v8>; }; +&spdifin { + pinctrl-0 = <&spdif_in_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_a { + pinctrl-0 = <&spdif_ao_out_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_a { + pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, + <&tdm_b_dout0_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + assigned-clock-rates = <0>, <0>, <0>; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 7ca904f5ac..4969a76460 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -155,9 +155,9 @@ "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -196,7 +196,7 @@ /* spdif hdmi or toslink interface */ dai-link-4 { - sound-dai = <&spdifout>; + sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; @@ -456,7 +456,7 @@ vqmmc-supply = <&flash_1v8>; }; -&spdifout { +&spdifout_a { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts new file mode 100644 index 0000000000..65b963d794 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/clock/g12a-clkc.h> +#include "meson-g12b-a311d.dtsi" +#include "meson-libretech-cottonwood.dtsi" + +/ { + compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b"; + model = "Libre Computer AML-A311D-CC Alta"; + + vddcpu_a: regulator-vddcpu-a { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + sound { + model = "LC-ALTA"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_C IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 3e826095e7..8fc2e143cb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -34,9 +34,9 @@ "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -75,7 +75,7 @@ /* spdif hdmi or toslink interface */ dai-link-4 { - sound-dai = <&spdifout>; + sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; @@ -139,7 +139,7 @@ }; }; -&spdifout { +&spdifout_a { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index 098a3af6d3..ce548b3732 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -29,9 +29,9 @@ "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -70,7 +70,7 @@ /* spdif hdmi or toslink interface */ dai-link-4 { - sound-dai = <&spdifout>; + sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; @@ -125,7 +125,7 @@ linux,rc-map-name = "rc-khadas"; }; -&spdifout { +&spdifout_a { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 3c93d1898b..292c718ee1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -9,11 +9,19 @@ #include "meson-gxbb-p20x.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p200", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P200 Development Board"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + avdd18_usb_adc: regulator-avdd18_usb_adc { compatible = "regulator-fixed"; regulator-name = "AVDD18_USB_ADC"; @@ -57,6 +65,58 @@ press-threshold-microvolt = <0>; /* 0% */ }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "P200"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; ðmac { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 150a82f3b2..6f81eed83b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -8,10 +8,49 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p201", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P201 Development Board"; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "P201"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; ðmac { diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi new file mode 100644 index 0000000000..35e8f5bae9 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "10U2"; + }; + + /* TOFIX: handle CVBS_DET on SARADC channel 0 */ + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + led-blue { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_ACTIVITY; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm_ab 1 1250 0>; + active-low; + }; + }; + + led-green { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "default-on"; + max-brightness = <255>; + pwms = <&pwm_cd 1 1250 0>; + active-low; + }; + }; + + led-orange { + compatible = "gpio-leds"; + + led { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_STANDBY; + gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "5V_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + flash_1v8: regulator-flash-1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + + /* FIXME: controlled by TEST_N */ + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&dc_in>; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + }; + + vddio_c: regulator-vddio_c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + vin-supply = <&vddao_3v3>; + gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>; + states = <3300000 0>, + <1800000 1>; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&dioo2133>; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* + * Audio setup: The 40 pins header provides access to 2 TDMs, + * SPDIF In/Out and PDM inputs. + * - TDM A: 2 lanes + * D0: 40/X9 + * D1: 38/X8 + * BCLK: 12/X11 + * FS: 35/X10 + * - TDM B: 4 lanes + * D0: 37/A3 + * D1: 16/A4 + * D2: 18/A5 or 7/AO6 + * D3: 22/A6 or 21/H5 + * BCLK: 29/A1 or 8/AO8 + * FS: 31/A2 or 11/AO7 + * - 2 Master Clocks: + * MCLK0: 15/A0 or 10/AO9 + * MCLK1: 33/X15 + * - SPDIF: + * OUT: 32/A11 + * IN: 21/H5 + * - PDM Input: + * DO: 13/A8 + * D1: 26/A9 + * D2: 22/A6 + * D3: 18/A5 + * DCLK: 36/A7 + * + * TDM C is not usable on the 40 pins connector so it is + * setup for the HDMI 4 lanes i2s. + * + * No pinctrl is enabled by default to preserve the + * genericity of the 40 pins header. Many configurations are + * possible based on the desired use case. Please adjust TDM + * masks, clock setups and pinctrl accordingly. + */ + + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "dsp_a"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_A>; + }; + }; + + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + dai-link-8 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-10 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + status = "okay"; + AVDD-supply = <&vddio_ao18>; +}; + +&arb { + status = "okay"; +}; + +&cecb_AO { + status = "okay"; + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&dwc3 { + #address-cells = <1>; + #size-cells = <0>; + + hub: hub@1 { + compatible = "usb5e3,626"; + reg = <1>; + reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&vcc_5v>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&periphs_pinctrl { + spi_cs_disable_pins: spi-cs-disable { + mux { + groups = "BOOT_14"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + eth_phy_irq_pins: eth-phy-irq { + mux { + groups = "GPIOZ_14"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&pwm_AO_cd { + status = "okay"; + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_b_x7_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x3_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_c>; +}; + +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>, + <&spi_cs_disable_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>; + + w25lq128d: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <80000000>; + }; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy1 { + phy-supply = <&dc_in>; +}; + +&usb3_pcie_phy { + phy-supply = <&vcc_5v>; +}; + +&usb { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index 8ffbcb2b1a..b1b81ac032 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -15,7 +15,7 @@ #size-cells = <2>; aliases { - serial0 = &uart_B; + serial0 = &uart_b; }; memory@0 { @@ -25,6 +25,12 @@ }; -&uart_B { +&uart_b { status = "okay"; }; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index f24460186d..dac18eb634 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -106,6 +106,14 @@ #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 82>; }; + + remote_pins: remote-pin { + mux { + groups = "remote_in"; + function = "remote_in"; + bias-disable; + }; + }; }; gpio_intc: interrupt-controller@4080 { @@ -118,14 +126,14 @@ <10 11 12 13 14 15 16 17 18 19 20 21>; }; - uart_B: serial@7a000 { + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; clocks = <&xtal>, <&xtal>, <&xtal>; clock-names = "xtal", "pclk", "baud"; + status = "disabled"; }; reset: reset-controller@2000 { @@ -133,6 +141,18 @@ reg = <0x0 0x2000 0x0 0x98>; #reset-cells = <1>; }; + + ir: ir@84040 { + compatible = "amlogic,meson-s4-ir"; + reg = <0x0 0x84040 0x0 0x30>; + interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + hwrng: rng@440788 { + compatible = "amlogic,meson-s4-rng"; + reg = <0x0 0x440788 0x0 0x0c>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts new file mode 100644 index 0000000000..537370db36 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/clock/g12a-clkc.h> +#include "meson-sm1.dtsi" +#include "meson-libretech-cottonwood.dtsi" + +/ { + compatible = "libretech,aml-s905d3-cc", "amlogic,sm1"; + model = "Libre Computer AML-S905D3-CC Solitude"; + + sound { + model = "LC-SOLITUDE"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_A IN 13", "TDM_A Loopback", + "TDMIN_B IN 13", "TDM_A Loopback", + "TDMIN_C IN 13", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_A IN 14", "TDM_B Loopback", + "TDMIN_B IN 14", "TDM_B Loopback", + "TDMIN_C IN 14", "TDM_B Loopback", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_A IN 15", "TDM_C Loopback", + "TDMIN_B IN 15", "TDM_C Loopback", + "TDMIN_C IN 15", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 377660d705..65ebac3082 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -728,7 +728,7 @@ }; }; - sbgpio: gpio@17001000{ + sbgpio: gpio@17001000 { compatible = "apm,xgene-gpio-sb"; reg = <0x0 0x17001000 0x0 0x400>; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index efa79209f4..988928c60f 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -946,7 +946,7 @@ dr_mode = "host"; }; - sbgpio: gpio@17001000{ + sbgpio: gpio@17001000 { compatible = "apm,xgene-gpio-sb"; reg = <0x0 0x17001000 0x0 0x400>; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index 53a9b76057..22a200fb07 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -184,7 +184,7 @@ status = "disabled"; }; - uart1: serial@5801A000 { + uart1: serial@5801a000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801a000 0x0 0x2000>; clocks = <&clk BM1880_CLK_UART_500M>, @@ -197,7 +197,7 @@ status = "disabled"; }; - uart2: serial@5801C000 { + uart2: serial@5801c000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801c000 0x0 0x2000>; clocks = <&clk BM1880_CLK_UART_500M>, @@ -210,7 +210,7 @@ status = "disabled"; }; - uart3: serial@5801E000 { + uart3: serial@5801e000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801e000 0x0 0x2000>; clocks = <&clk BM1880_CLK_UART_500M>, diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts index fbf0392b83..dec5a110f1 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts @@ -113,7 +113,6 @@ spi-max-frequency = <5000000>; spi-cpha; spi-cpol; - pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; pl022,com-mode = <0>; @@ -137,7 +136,6 @@ at25,page-size = <64>; spi-cpha; spi-cpol; - pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; pl022,com-mode = <0>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index d163891cd3..8f02de8480 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -124,19 +124,18 @@ audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; - samsung,audio-routing = - /* Headphone */ - "HP", "HPOUT1L", - "HP", "HPOUT1R", - - /* Speaker */ - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - - /* Receiver */ - "RCV", "HPOUT3L", - "RCV", "HPOUT3R"; + audio-routing = /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; }; }; @@ -1103,7 +1102,7 @@ te_irq: te-irq-pins { samsung,pins = "gpf1-3"; - samsung,pin-function = <0xf>; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 54ed5167d0..6ed80ddf33 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -25,7 +25,6 @@ pinctrl6 = &pinctrl_fsys0; pinctrl7 = &pinctrl_fsys1; pinctrl8 = &pinctrl_bus1; - tmuctrl0 = &tmuctrl_0; }; arm-pmu { diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts index 6ed3891250..f074df8982 100644 --- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts +++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts @@ -29,6 +29,22 @@ stdout-path = &serial_0; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-supply = <®_usb_host_vbus>; + id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <µ_usb_det_pins>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + /* * RAM: 4 GiB (eMCP): * - 2 GiB at 0x80000000 @@ -111,6 +127,35 @@ }; }; + /* TODO: Remove this once PMIC is implemented */ + reg_dummy: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "dummy_reg"; + }; + + reg_usb_host_vbus: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpa3 5 GPIO_ACTIVE_LOW>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + ramoops@f0000000 { + compatible = "ramoops"; + reg = <0x0 0xf0000000 0x200000>; + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x100000>; + pmsg-size = <0x20000>; + }; + }; + /* * RTC clock (XrtcXTI); external, must be 32.768 kHz. * @@ -172,6 +217,12 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; + + micro_usb_det_pins: micro-usb-det-pins { + samsung,pins = "gpa0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &rtc { @@ -186,6 +237,28 @@ pinctrl-0 = <&uart1_pins>; }; +&usbdrd { + status = "okay"; + vdd10-supply = <®_dummy>; + vdd33-supply = <®_dummy>; +}; + +&usbdrd_dwc3 { + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "host"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; +}; + +&usbdrd_phy { + status = "okay"; +}; + &usi_uart { samsung,clkreq-on; /* needed for UART mode */ status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index aa077008b3..53104e65b9 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -570,6 +570,36 @@ clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>; }; + usbdrd: usb@13600000 { + compatible = "samsung,exynos850-dwusb3"; + ranges = <0x0 0x13600000 0x10000>; + clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>, + <&cmu_hsi CLK_GOUT_USB_REF_CLK>; + clock-names = "bus_early", "ref"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + usbdrd_dwc3: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy 0>; + phy-names = "usb2-phy"; + }; + }; + + usbdrd_phy: phy@135d0000 { + compatible = "samsung,exynos850-usbdrd-phy"; + reg = <0x135d0000 0x100>; + clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>, + <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + status = "disabled"; + }; + usi_uart: usi@138200c0 { compatible = "samsung,exynos850-usi"; reg = <0x138200c0 0x20>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 89aee6c925..300049037e 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -15,12 +15,15 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb @@ -33,6 +36,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo @@ -66,6 +70,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb @@ -83,6 +88,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb + +imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb @@ -92,6 +101,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb + +imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb @@ -133,6 +146,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb + +imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33-dtbs += imx8mq-tqma8mq-mba8mx.dtb imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb @@ -159,6 +176,7 @@ imx8mm-venice-gw73xx-0x-rpidsi-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo +imx8mp-venice-gw74xx-imx219-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-imx219.dtbo imx8mp-venice-gw74xx-rpidsi-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb @@ -171,6 +189,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts new file mode 100644 index 0000000000..03748a7f65 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "fsl-ls1043a-tqmls1043a.dtsi" +#include "tqmls10xxa-mbls10xxa.dtsi" + +/ { + model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board"; + compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a", + "fsl,ls1043a"; + + aliases { + qsgmii-s1-p1 = &qsgmii1_phy1; + qsgmii-s1-p2 = &qsgmii1_phy2; + qsgmii-s1-p3 = &qsgmii1_phy3; + qsgmii-s1-p4 = &qsgmii1_phy4; + qsgmii-s2-p1 = &qsgmii2_phy1; + qsgmii-s2-p2 = &qsgmii2_phy2; + qsgmii-s2-p3 = &qsgmii2_phy3; + qsgmii-s2-p4 = &qsgmii2_phy4; + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = &duart1; + }; +}; + +&esdhc { + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; +}; + +&usb2 { + status = "okay"; +}; + +#include "fsl-ls1043-post.dtsi" +#include "tqmls104xa-mbls10xxa-fman.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi new file mode 100644 index 0000000000..12d5f3938e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for LS1043A based SoM of TQ + */ + +#include "fsl-ls1043a.dtsi" +#include "tqmls10xxa.dtsi" + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index f8acbefc80..229bb4bebe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -526,20 +526,6 @@ status = "disabled"; }; - dspi1: spi@2110000 { - compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2110000 0x0 0x10000>; - interrupts = <0 65 0x4>; - clock-names = "dspi"; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(1)>; - spi-num-chipselects = <5>; - big-endian; - status = "disabled"; - }; - i2c0: i2c@2180000 { compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts new file mode 100644 index 0000000000..37834ae3de --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "fsl-ls1046a-tqmls1046a.dtsi" +#include "tqmls10xxa-mbls10xxa.dtsi" + +/ { + model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board"; + compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a", + "fsl,ls1046a"; + + aliases { + qsgmii-s1-p1 = &qsgmii1_phy1; + qsgmii-s1-p2 = &qsgmii1_phy2; + qsgmii-s1-p3 = &qsgmii1_phy3; + qsgmii-s1-p4 = &qsgmii1_phy4; + qsgmii-s2-p1 = &qsgmii2_phy1; + qsgmii-s2-p2 = &qsgmii2_phy2; + qsgmii-s2-p3 = &qsgmii2_phy3; + qsgmii-s2-p4 = &qsgmii2_phy4; + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = &duart1; + }; +}; + +&dspi { + status = "okay"; +}; + +&esdhc { + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; +}; + +&usb2 { + status = "okay"; +}; + +#include "fsl-ls1046-post.dtsi" +#include "tqmls104xa-mbls10xxa-fman.dtsi" + +&enet7 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi new file mode 100644 index 0000000000..4a8f8bc688 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for LS1046A based SoM of TQ + */ + +#include "fsl-ls1046a.dtsi" +#include "tqmls10xxa.dtsi" + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + qflash1: flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts new file mode 100644 index 0000000000..e567918f6a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "fsl-ls1088a-tqmls1088a.dtsi" +#include "tqmls10xxa-mbls10xxa.dtsi" + +/ { + model = "TQ-Systems GmbH LS1088A TQMLS1088A SoM on MBLS10xxA board"; + compatible = "tq,ls1088a-tqmls1088a-mbls10xxa", "tq,ls1088a-tqmls1088a", + "fsl,ls1088a"; + + aliases { + dpmac1 = &dpmac1; + dpmac2 = &dpmac2; + dpmac3 = &dpmac3; + dpmac4 = &dpmac4; + dpmac5 = &dpmac5; + dpmac6 = &dpmac6; + dpmac7 = &dpmac7; + dpmac8 = &dpmac8; + dpmac9 = &dpmac9; + dpmac10 = &dpmac10; + qsgmii-s1-p1 = &qsgmii1_phy1; + qsgmii-s1-p2 = &qsgmii1_phy2; + qsgmii-s1-p3 = &qsgmii1_phy3; + qsgmii-s1-p4 = &qsgmii1_phy4; + qsgmii-s2-p1 = &qsgmii2_phy1; + qsgmii-s2-p2 = &qsgmii2_phy2; + qsgmii-s2-p3 = &qsgmii2_phy3; + qsgmii-s2-p4 = &qsgmii2_phy4; + rgmii-s1 = &rgmii_phy1; + rgmii-s2 = &rgmii_phy2; + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = &duart1; + }; +}; + +&esdhc { + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; +}; + +&sfp1_i2c { + status = "okay"; +}; + +&sfp2_i2c { + status = "okay"; +}; + +#include "tqmls1088a-mbls10xxa-mc.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi new file mode 100644 index 0000000000..9a0f21484b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for LS1088A based SoM of TQ + */ + +#include "fsl-ls1088a.dtsi" +#include "tqmls10xxa.dtsi" + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + qflash1: flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <62500000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index ea6a94b57a..f176ca2e24 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -626,6 +626,13 @@ #phy-cells = <1>; }; + serdes_2: phy@1eb0000 { + compatible = "fsl,lynx-28g"; + reg = <0x0 0x1eb0000 0x0 0x1e30>; + #phy-cells = <1>; + status = "disabled"; + }; + crypto: crypto@8000000 { compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; fsl,sec-era = <10>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts new file mode 100644 index 0000000000..9f88583aa2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2162A Clearfog +// +// Copyright 2023 Josua Mayer <josua@solid-run.com> + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" +#include "fsl-lx2162a-sr-som.dtsi" + +/ { + model = "SolidRun LX2162A Clearfog"; + compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + i2c0 = &i2c0; + i2c1 = &i2c2; + i2c2 = &i2c4; + i2c3 = &sfp_i2c0; + i2c4 = &sfp_i2c1; + i2c5 = &sfp_i2c2; + i2c6 = &sfp_i2c3; + i2c7 = &mpcie1_i2c; + i2c8 = &mpcie0_i2c; + i2c9 = &pcieclk_i2c; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_sfp_at: led-sfp-at { + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */ + default-state = "off"; + }; + + led_sfp_ab: led-sfp-ab { + gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* PROC_IRQ11 */ + default-state = "off"; + }; + + led_sfp_bt: led-sfp-bt { + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; /* EVT1_B */ + default-state = "off"; + }; + + led_sfp_bb: led-sfp-bb { + gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* EVT2_B */ + default-state = "off"; + }; + }; + + sfp_at: sfp-at { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c0>; + mod-def0-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; /* EVT4_B */ + maximum-power-milliwatt = <2000>; + }; + + sfp_ab: sfp-ab { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c1>; + mod-def0-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; /* PROC_IRQ1 */ + maximum-power-milliwatt = <2000>; + }; + + sfp_bt: sfp-bt { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c2>; + mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* PROC_IRQ10 */ + maximum-power-milliwatt = <2000>; + }; + + sfp_bb: sfp-bb { + compatible = "sff,sfp"; + i2c-bus = <&sfp_i2c3>; + mod-def0-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; /* EVT3_B */ + maximum-power-milliwatt = <2000>; + }; +}; + +&dpmac3 { + sfp = <&sfp_at>; + managed = "in-band-status"; + phys = <&serdes_1 7>; +}; + +&dpmac4 { + sfp = <&sfp_ab>; + managed = "in-band-status"; + phys = <&serdes_1 6>; +}; + +&dpmac5 { + sfp = <&sfp_bt>; + managed = "in-band-status"; + phys = <&serdes_1 5>; +}; + +&dpmac6 { + sfp = <&sfp_bb>; + managed = "in-band-status"; + phys = <&serdes_1 4>; +}; + +&dpmac11 { + phys = <&serdes_2 0>; + phy-handle = <ðernet_phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac12 { + phys = <&serdes_2 1>; + phy-handle = <ðernet_phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac13 { + phys = <&serdes_2 6>; + phy-handle = <ðernet_phy6>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac14 { + phys = <&serdes_2 7>; + phy-handle = <ðernet_phy8>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac15 { + phys = <&serdes_2 4>; + phy-handle = <ðernet_phy4>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac16 { + phys = <&serdes_2 5>; + phy-handle = <ðernet_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac17 { + /* override connection to on-SoM phy */ + /delete-property/ phy-handle; + /delete-property/ phy-connection-type; + + phys = <&serdes_2 2>; + phy-handle = <ðernet_phy5>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&dpmac18 { + phys = <&serdes_2 3>; + phy-handle = <ðernet_phy7>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&emdio1 { + ethernet_phy1: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + max-speed = <1000>; + }; + + ethernet_phy2: ethernet-phy@9 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <9>; + max-speed = <1000>; + }; + + ethernet_phy3: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <10>; + max-speed = <1000>; + }; + + ethernet_phy4: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <11>; + max-speed = <1000>; + }; + + ethernet_phy5: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <12>; + max-speed = <1000>; + }; + + ethernet_phy6: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <13>; + max-speed = <1000>; + }; + + ethernet_phy7: ethernet-phy@14 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <14>; + max-speed = <1000>; + }; + + ethernet_phy8: ethernet-phy@15 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <15>; + max-speed = <1000>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +ðernet_phy0 { + /* + * SoM has a phy at address 1 connected to SoC Ethernet Controller 1. + * It competes for WRIOP MAC17, and no connector has been wired. + */ + status = "disabled"; +}; + +&i2c2 { + status = "okay"; + + /* retimer@18 */ + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + sfp_i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfp_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sfp_i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sfp_i2c3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + mpcie1_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + mpcie0_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + pcieclk_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + /* clock-controller@6b */ + }; + }; +}; + +&pcie3 { + status = "disabled"; +}; + +&pcie4 { + status = "disabled"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio11 { + status = "okay"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio15 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; + +&pcs_mdio17 { + status = "okay"; +}; + +&pcs_mdio18 { + status = "okay"; +}; + +&serdes_1 { + status = "okay"; +}; + +&serdes_2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi new file mode 100644 index 0000000000..0580ea30cf --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2162A-SOM +// +// Copyright 2021 Rabeeh Khoury <rabeeh@solid-run.com> +// Copyright 2023 Josua Mayer <josua@solid-run.com> + +&crypto { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <ðernet_phy0>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + ethernet_phy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +&esdhc1 { + bus-width = <8>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + status = "okay"; +}; + +&fspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + +&i2c0 { + status = "okay"; + + fan-controller@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + ddr_spd: eeprom@51 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x51>; + read-only; + }; + + config_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c4 { + status = "okay"; + + variable_eeprom: eeprom@54 { + compatible = "st,24c2048", "atmel,24c2048"; + reg = <0x54>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi index c6d51f1162..5438923a90 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi @@ -165,7 +165,6 @@ "gpio5-24", "UART24-FORCEOFF", "gpio5-26", "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", "gpio5-31"; - ngpios = <32>; }; /* Apalis PWM3, MXM3 pin 6 */ diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi index 40067ab8aa..72136c436a 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -212,7 +212,6 @@ "gpio5-24", "UART24-FORCEOFF", "gpio5-26", "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", "gpio5-31"; - ngpios = <32>; }; /* Apalis PWM3, MXM3 pin 6 */ diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi index 0878a15acc..f69b0c1756 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -261,7 +261,7 @@ reset-assert-us = <2>; reset-deassert-us = <2>; reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>; - reset-names = "phy-reset"; + reset-names = "phy"; }; }; }; @@ -500,15 +500,6 @@ "MXM3_185", "MXM3_187"; - /* - * Add GPIO2_20 as a wakeup source: - * Pin: 101 SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO) - * Type: 5 SC_PAD_WAKEUP_FALL_EDGE - * Line: 20 - */ - pad-wakeup = <IMX8QM_SPI3_CS0 5 20>; - pad-wakeup-num = <1>; - pcie-wifi-hog { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_wifi_refclk>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index 6c8d75ef92..9d75ce4675 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -7,17 +7,74 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +audio_ipg_clk: clock-audio-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "audio_ipg_clk"; +}; + audio_subsys: bus@59000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x59000000 0x0 0x59000000 0x1000000>; - audio_ipg_clk: clock-audio-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <120000000>; - clock-output-names = "audio_ipg_clk"; + edma0: dma-controller@591f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x591f0000 0x190000>; + #dma-cells = <3>; + shared-interrupt; + dma-channels = <24>; + dma-channel-mask = <0x5c0c00>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */ + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, /* 1 */ + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, /* 2 */ + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, /* 3 */ + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, /* 4 */ + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, /* 5 */ + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 6 esai0 */ + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 7 */ + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* 8 spdif0 */ + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, /* 9 */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 10 unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 11 unused */ + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 12 sai0 */ + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 13 */ + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 14 sai1 */ + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 15 */ + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* 16 sai2 */ + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* 17 sai3 */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 18 unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 19 unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 20 unused */ + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, /* 21 */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 22 unused */ + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; /* 23 unused */ + power-domains = <&pd IMX_SC_R_DMA_0_CH0>, + <&pd IMX_SC_R_DMA_0_CH1>, + <&pd IMX_SC_R_DMA_0_CH2>, + <&pd IMX_SC_R_DMA_0_CH3>, + <&pd IMX_SC_R_DMA_0_CH4>, + <&pd IMX_SC_R_DMA_0_CH5>, + <&pd IMX_SC_R_DMA_0_CH6>, + <&pd IMX_SC_R_DMA_0_CH7>, + <&pd IMX_SC_R_DMA_0_CH8>, + <&pd IMX_SC_R_DMA_0_CH9>, + <&pd IMX_SC_R_DMA_0_CH10>, + <&pd IMX_SC_R_DMA_0_CH11>, + <&pd IMX_SC_R_DMA_0_CH12>, + <&pd IMX_SC_R_DMA_0_CH13>, + <&pd IMX_SC_R_DMA_0_CH14>, + <&pd IMX_SC_R_DMA_0_CH15>, + <&pd IMX_SC_R_DMA_0_CH16>, + <&pd IMX_SC_R_DMA_0_CH17>, + <&pd IMX_SC_R_DMA_0_CH18>, + <&pd IMX_SC_R_DMA_0_CH19>, + <&pd IMX_SC_R_DMA_0_CH20>, + <&pd IMX_SC_R_DMA_0_CH21>, + <&pd IMX_SC_R_DMA_0_CH22>, + <&pd IMX_SC_R_DMA_0_CH23>; }; dsp_lpcg: clock-controller@59580000 { @@ -65,4 +122,35 @@ audio_subsys: bus@59000000 { memory-region = <&dsp_reserved>; status = "disabled"; }; + + edma1: dma-controller@599f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x599f0000 0xc0000>; + #dma-cells = <3>; + shared-interrupt; + dma-channels = <11>; + dma-channel-mask = <0xc0>; + interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */ + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, /* 1 */ + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, /* 2 */ + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, /* 3 */ + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, /* 4 */ + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, /* 5 */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 6 unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 7 unused */ + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */ + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */ + power-domains = <&pd IMX_SC_R_DMA_1_CH0>, + <&pd IMX_SC_R_DMA_1_CH1>, + <&pd IMX_SC_R_DMA_1_CH2>, + <&pd IMX_SC_R_DMA_1_CH3>, + <&pd IMX_SC_R_DMA_1_CH4>, + <&pd IMX_SC_R_DMA_1_CH5>, + <&pd IMX_SC_R_DMA_1_CH6>, + <&pd IMX_SC_R_DMA_1_CH7>, + <&pd IMX_SC_R_DMA_1_CH8>, + <&pd IMX_SC_R_DMA_1_CH9>, + <&pd IMX_SC_R_DMA_1_CH10>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index fc1a5d3438..3c42240e78 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -7,33 +7,33 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; +}; + +conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; +}; + +conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; +}; + conn_subsys: bus@5b000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - conn_axi_clk: clock-conn-axi { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <333333333>; - clock-output-names = "conn_axi_clk"; - }; - - conn_ahb_clk: clock-conn-ahb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <166666666>; - clock-output-names = "conn_ahb_clk"; - }; - - conn_ipg_clk: clock-conn-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <83333333>; - clock-output-names = "conn_ipg_clk"; - }; - usbotg1: usb@5b0d0000 { compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x5b0d0000 0x200>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index adb98a72bd..b0bb77150a 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -7,19 +7,19 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +dma_ipg_clk: clock-dma-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "dma_ipg_clk"; +}; + dma_subsys: bus@5a000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; - dma_ipg_clk: clock-dma-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <120000000>; - clock-output-names = "dma_ipg_clk"; - }; - lpspi0: spi@5a000000 { compatible = "fsl,imx7ulp-spi"; reg = <0x5a000000 0x10000>; @@ -86,52 +86,135 @@ dma_subsys: bus@5a000000 { lpuart0: serial@5a060000 { reg = <0x5a060000 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, <&uart0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_0>; + dma-names = "tx","rx"; + dmas = <&edma2 9 0 0>, <&edma2 8 0 1>; status = "disabled"; }; lpuart1: serial@5a070000 { reg = <0x5a070000 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, <&uart1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_1>; + dma-names = "tx","rx"; + dmas = <&edma2 11 0 0>, <&edma2 10 0 1>; status = "disabled"; }; lpuart2: serial@5a080000 { reg = <0x5a080000 0x1000>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, <&uart2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_2>; + dma-names = "tx","rx"; + dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; status = "disabled"; }; lpuart3: serial@5a090000 { reg = <0x5a090000 0x1000>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, <&uart3_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_3>; + dma-names = "tx","rx"; + dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; status = "disabled"; }; + adma_pwm: pwm@5a190000 { + compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; + reg = <0x5a190000 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&adma_pwm_lpcg 1>, + <&adma_pwm_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <3>; + power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; + }; + + edma2: dma-controller@5a1f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x5a1f0000 0x170000>; + #dma-cells = <3>; + dma-channels = <16>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_DMA_2_CH0>, + <&pd IMX_SC_R_DMA_2_CH1>, + <&pd IMX_SC_R_DMA_2_CH2>, + <&pd IMX_SC_R_DMA_2_CH3>, + <&pd IMX_SC_R_DMA_2_CH4>, + <&pd IMX_SC_R_DMA_2_CH5>, + <&pd IMX_SC_R_DMA_2_CH6>, + <&pd IMX_SC_R_DMA_2_CH7>, + <&pd IMX_SC_R_DMA_2_CH8>, + <&pd IMX_SC_R_DMA_2_CH9>, + <&pd IMX_SC_R_DMA_2_CH10>, + <&pd IMX_SC_R_DMA_2_CH11>, + <&pd IMX_SC_R_DMA_2_CH12>, + <&pd IMX_SC_R_DMA_2_CH13>, + <&pd IMX_SC_R_DMA_2_CH14>, + <&pd IMX_SC_R_DMA_2_CH15>; + }; + + edma3: dma-controller@5a9f0000 { + compatible = "fsl,imx8qm-edma"; + reg = <0x5a9f0000 0x90000>; + #dma-cells = <3>; + dma-channels = <8>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_DMA_3_CH0>, + <&pd IMX_SC_R_DMA_3_CH1>, + <&pd IMX_SC_R_DMA_3_CH2>, + <&pd IMX_SC_R_DMA_3_CH3>, + <&pd IMX_SC_R_DMA_3_CH4>, + <&pd IMX_SC_R_DMA_3_CH5>, + <&pd IMX_SC_R_DMA_3_CH6>, + <&pd IMX_SC_R_DMA_3_CH7>; + }; + spi0_lpcg: clock-controller@5a400000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5a400000 0x10000>; @@ -228,6 +311,18 @@ dma_subsys: bus@5a000000 { power-domains = <&pd IMX_SC_R_UART_3>; }; + adma_pwm_lpcg: clock-controller@5a590000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a590000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "adma_pwm_lpcg_clk", + "adma_pwm_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; + }; + i2c0: i2c@5a800000 { reg = <0x5a800000 0x4000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi index a90654155a..e7783cc2d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -3,25 +3,22 @@ * Copyright 2019-2021 NXP * Zhou Guoniu <guoniu.zhou@nxp.com> */ +img_ipg_clk: clock-img-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "img_ipg_clk"; +}; + img_subsys: bus@58000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x58000000 0x0 0x58000000 0x1000000>; - img_ipg_clk: clock-img-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "img_ipg_clk"; - }; - jpegdec: jpegdec@58400000 { reg = <0x58400000 0x00050000>; - interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; @@ -29,18 +26,13 @@ img_subsys: bus@58000000 { <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; assigned-clock-rates = <200000000>, <200000000>; power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, - <&pd IMX_SC_R_MJPEG_DEC_S0>, - <&pd IMX_SC_R_MJPEG_DEC_S1>, - <&pd IMX_SC_R_MJPEG_DEC_S2>, - <&pd IMX_SC_R_MJPEG_DEC_S3>; + <&pd IMX_SC_R_MJPEG_DEC_S0>; + slot = <0>; }; jpegenc: jpegenc@58450000 { reg = <0x58450000 0x00050000>; - interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; @@ -48,10 +40,8 @@ img_subsys: bus@58000000 { <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; assigned-clock-rates = <200000000>, <200000000>; power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, - <&pd IMX_SC_R_MJPEG_ENC_S0>, - <&pd IMX_SC_R_MJPEG_ENC_S1>, - <&pd IMX_SC_R_MJPEG_ENC_S2>, - <&pd IMX_SC_R_MJPEG_ENC_S3>; + <&pd IMX_SC_R_MJPEG_ENC_S0>; + slot = <0>; }; img_jpeg_dec_lpcg: clock-controller@585d0000 { diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 133f2b1ce1..7e510b21bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -7,6 +7,13 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +lsio_bus_clk: clock-lsio-bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "lsio_bus_clk"; +}; + lsio_subsys: bus@5d000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -14,20 +21,6 @@ lsio_subsys: bus@5d000000 { ranges = <0x5d000000 0x0 0x5d000000 0x1000000>, <0x08000000 0x0 0x08000000 0x10000000>; - lsio_mem_clk: clock-lsio-mem { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "lsio_mem_clk"; - }; - - lsio_bus_clk: clock-lsio-bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-output-names = "lsio_bus_clk"; - }; - lsio_pwm0: pwm@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d000000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index b9157ca08b..b972658efb 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -186,7 +186,6 @@ &flexspi0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi0>; - nxp,fspi-dll-slvdly = <4>; status = "okay"; mt35xu512aba0: flash@0 { @@ -365,7 +364,6 @@ fsl,spi-only-use-cs1-sel; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpspi3>; - pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>; status = "okay"; spidev0: spi@0 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi index e2eeddf38a..0a477f6318 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -15,23 +15,53 @@ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; }; +&edma2 { + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>; +}; + +&edma3 { + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>; +}; + &i2c0 { - compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; }; &i2c1 { - compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; }; &i2c2 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; }; &i2c3 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index 652493ae4b..a414df6453 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -6,14 +6,16 @@ /delete-node/ &enet1_lpcg; /delete-node/ &fec2; -&conn_subsys { +/ { conn_enet0_root_clk: clock-conn-enet0-root { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <250000000>; clock-output-names = "conn_enet0_root_clk"; }; +}; +&conn_subsys { eqos: ethernet@5b050000 { compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x5b050000 0x10000>; @@ -116,7 +118,7 @@ }; &fec1 { - compatible = "fsl,imx8qm-fec"; + compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec"; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 792b7224ca..f580eb6db9 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -122,10 +122,8 @@ &lsio_mu1 3 3>; pd: power-controller { - compatible = "fsl,scu-pd"; + compatible = "fsl,imx8dl-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; - wakeup-irq = <160 163 235 236 237 228 229 230 231 238 - 239 240 166 169>; }; clk: clock-controller { @@ -168,12 +166,12 @@ }; watchdog { - compatible = "fsl,imx-sc-wdt"; + compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt"; timeout-sec = <60>; }; tsens: thermal-sensor { - compatible = "fsl,imx-sc-thermal"; + compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal"; #thermal-sensor-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index b10e2a703a..6086dae2e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -6,6 +6,13 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <1>; + #sound-dai-cells = <0>; + }; + leds { compatible = "gpio-leds"; @@ -98,18 +105,46 @@ enable-active-high; }; - sound { - compatible = "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - audio-cpu = <&sai3>; - audio-codec = <&wm8962>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; + sound-dmic { + compatible = "simple-audio-card"; + simple-audio-card,name = "dmic"; + simple-audio-card,format = "pdm"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + + dailink_master: simple-audio-card,cpu { + sound-dai = <&micfil>; + }; + + simple-audio-card,codec { + sound-dai = <&dmic_codec>; + }; + }; + + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + frame-master; + bitclock-master; + }; }; }; @@ -192,6 +227,7 @@ 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; + #sound-dai-cells = <0>; }; pca6416_0: gpio@20 { @@ -215,6 +251,15 @@ }; }; +&micfil { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MM_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <49152000>; + status = "okay"; +}; + &mipi_csi { status = "okay"; ports { @@ -352,6 +397,13 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 + MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0xd6 + >; + }; + pinctrl_reg_usb_otg1: usbotg1grp { fsl,pins = < MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts index 010e836ebe..27848cee16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts @@ -23,7 +23,6 @@ &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts index 606a4f4d5f..75bbedc616 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts @@ -111,6 +111,11 @@ }; }; +/* QSPI is not populated on the SoM */ +&flexspi { + status = "disabled"; +}; + &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts new file mode 100644 index 0000000000..968f475b9a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include "imx8mm-phycore-som.dtsi" + +/ { + model = "PHYTEC phyGATE-Tauri-L-iMX8MM"; + compatible = "phytec,imx8mm-phygate-tauri-l", + "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + chosen { + stdout-path = &uart3; + }; + + can_osc_40m: clock-can { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + clock-output-names = "can_osc_40m"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + key { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + label = "KEY-A"; + linux,code = <KEY_A>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-1 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + led-2 { + color = <LED_COLOR_ID_YELLOW>; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + }; + + usdhc1_pwrseq: pwr-seq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <60>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + }; + + reg_usb_hub_vbus: regulator-hub-otg1 { + compatible = "regulator-fixed"; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhubpwr>; + regulator-name = "usb_hub_vbus"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwr>; + regulator-name = "usb_otg1_vbus"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; +}; + +&ecspi1 { + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, + <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio5 2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* CAN MCP251XFD */ + can0: can@0 { + compatible = "microchip,mcp251xfd"; + reg = <0>; + clocks = <&can_osc_40m>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + spi-max-frequency = <10000000>; + }; + + tpm: tpm@1 { + compatible = "tcg,tpm_tis-spi"; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm>; + reg = <1>; + spi-max-frequency = <38000000>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + temp_sense0: temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + interrupt-parent = <&gpio4>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + #thermal-sensor-cells = <1>; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +/* PCIe */ +&pcie0 { + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_100M>, + <&clk IMX8MM_SYS_PLL2_250M>; + assigned-clock-rates = <10000000>, <100000000>, <250000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +/* RTC */ +&rv3028 { + trickle-resistor-ohms = <3000>; +}; + +&uart1 { + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* UART2 - RS232 */ +&uart2 { + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* UART - console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + adp-disable; + dr_mode = "otg"; + over-current-active-low; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + vbus-supply = <®_usb_hub_vbus>; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_nvcc_sd2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_can_int: can-intgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + >; + }; + + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x00 + >; + }; + + pinctrl_gpiokeys: keygrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c2 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x1e0 + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x1e0 + >; + }; + + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1e0 + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1e0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x1e0 + MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x1e0 + >; + }; + + pinctrl_leds: leds1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x00 + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x00 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* COEX2 */ + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x00 + /* COEX1 */ + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x40 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x40 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x40 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x00 + >; + }; + + pinctrl_tpm: tpmgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x00 + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x00 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x00 + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x00 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usbhubpwr: usbhubpwrgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x00 + >; + }; + + pinctrl_usbotg1pwr: usbotg1pwrgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x80 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso new file mode 100644 index 0000000000..e44249c6d8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; +}; + +&backlight_lvds { + status = "okay"; +}; + +&dsi_lvds_bridge { + status = "okay"; +}; + +&expander0 { + dsi-mux-oe-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-high; + line-name = "DSI_MUX_OE#"; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "tianma,tm070jvhg33"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index b4466a26d8..8c0c6e7159 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -230,6 +230,11 @@ }; }; +&mipi_dsi { + vddcore-supply = <&ldo4_reg>; + vddio-supply = <&ldo3_reg>; +}; + &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 0ce60ad9c7..6425773f68 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -96,7 +96,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 570992a52b..3a0a10e835 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -118,7 +118,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 1800c6a4b1..d79fe9f62b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -104,8 +104,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio1 { @@ -138,7 +145,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; @@ -362,6 +368,7 @@ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index ed46d4f3e6..87b80e2412 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -357,6 +357,8 @@ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -642,7 +644,6 @@ pinctrl-0 = <&pinctrl_ksz>; interrupt-parent = <&gpio4>; interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - phy-mode = "rgmii-id"; ports { #address-cells = <1>; @@ -678,7 +679,6 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <&fec1>; phy-mode = "rgmii-id"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index b318c2d080..06a394a41d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -314,6 +314,8 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -585,7 +587,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 0e102a12bc..db1737bf63 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -280,6 +280,8 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -541,7 +543,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts index 6afbabc89c..05489a31e7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -330,6 +330,8 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -585,7 +587,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 16761975f5..20018ee2c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -4,6 +4,12 @@ */ / { + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <1>; + #sound-dai-cells = <0>; + }; + leds { compatible = "gpio-leds"; @@ -74,6 +80,22 @@ enable-active-high; }; + sound-dmic { + compatible = "simple-audio-card"; + simple-audio-card,name = "dmic"; + simple-audio-card,format = "pdm"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + + dailink_master: simple-audio-card,cpu { + sound-dai = <&micfil>; + }; + + simple-audio-card,codec { + sound-dai = <&dmic_codec>; + }; + }; + sound-wm8962 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8962"; @@ -221,6 +243,15 @@ }; }; +&micfil { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MN_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <49152000>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -311,6 +342,13 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0xd6 + MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0xd6 + >; + }; + pinctrl_reg_usb_otg: reg-otggrp { fsl,pins = < MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts index 7acc5a960d..11a1ba5bfd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts @@ -21,7 +21,6 @@ &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 0e60995a57..3f6a19839c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -71,8 +71,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_wlf>; wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; - clock-names = "mclk"; }; sound-bt-sco { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso new file mode 100644 index 0000000000..29235e390a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; +}; + +&backlight_lvds { + status = "okay"; +}; + +&dsi_lvds_bridge { + status = "okay"; +}; + +&expander0 { + dsi-mux-oe-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-high; + line-name = "DSI_MUX_OE#"; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "tianma,tm070jvhg33"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi index 391ca5516e..fb24b9aa1b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -219,6 +219,11 @@ }; }; +&mipi_dsi { + vddcore-supply = <&ldo4_reg>; + vddio-supply = <&ldo3_reg>; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 08746fb825..0b1fa04f1d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -312,6 +312,8 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -583,7 +585,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index acd265d8b5..0bea0798d2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -23,6 +23,12 @@ stdout-path = &uart2; }; + clk_xtal25: clock-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -49,6 +55,12 @@ }; }; + dmic_codec: dmic-codec { + compatible = "dmic-codec"; + num-channels = <1>; + #sound-dai-cells = <0>; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -112,12 +124,6 @@ }; }; - pcie0_refclk: clock-pcie { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - reg_audio: regulator-wm8962 { compatible = "regulator-fixed"; regulator-name = "3v3_aud"; @@ -147,6 +153,22 @@ enable-active-high; }; + sound-dmic { + compatible = "simple-audio-card"; + simple-audio-card,name = "sound-pdm"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + + dailink_master: simple-audio-card,cpu { + sound-dai = <&micfil>; + }; + + simple-audio-card,codec { + sound-dai = <&dmic_codec>; + }; + }; + sound-wm8962 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8962"; @@ -174,6 +196,11 @@ }; }; +&audio_blk_ctrl { + assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>; + assigned-clock-rates = <393216000>, <135475200>; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -246,6 +273,13 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pcieclk: clock-generator@68 { + compatible = "renesas,9fgv0241"; + reg = <0x68>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; &i2c3 { @@ -364,6 +398,15 @@ }; }; +&micfil { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&clk IMX8MP_CLK_PDM>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <49152000>; + status = "okay"; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -372,8 +415,9 @@ }; &pcie_phy { + fsl,clkreq-unsupported; fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; - clocks = <&pcie0_refclk>; + clocks = <&pcieclk 1>; clock-names = "ref"; status = "okay"; }; @@ -545,6 +589,13 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK 0xd6 + MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0xd6 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts index 13674dc64b..5828c9d782 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -362,6 +362,8 @@ }; buck2: BUCK2 { /* VDD_ARM */ + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1000000>; regulator-ramp-delay = <3125>; @@ -484,7 +486,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; + status = "disabled"; }; &usb3_phy0 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts index 0b0c95432b..0afd90224a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts @@ -220,7 +220,7 @@ reg = <0x52>; pagesize = <16>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; /* MACs stored in ASCII */ ethmac1: mac-address@0 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index e9fb5f7f39..3b1c940860 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -186,9 +186,9 @@ &pcie_phy { clock-names = "ref"; - clocks = <&clk IMX8MP_SYS_PLL2_100M>; + clocks = <&hsio_blk_ctrl>; fsl,clkreq-unsupported; - fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts index 31d85d5871..b749e28e5e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -35,33 +35,6 @@ clock-frequency = <25000000>; }; - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_c_0_hs_ep: endpoint { - remote-endpoint = <&dwc3_0_hs_ep>; - }; - }; - - port@1 { - reg = <1>; - - usb_c_0_ss_ep: endpoint { - remote-endpoint = <&ptn5150_in_ep>; - }; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -202,33 +175,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ptn5150>; - ports { - #address-cells = <1>; - #size-cells = <0>; + port { - port@0 { - reg = <0>; - - ptn5150_in_ep: endpoint { - remote-endpoint = <&usb_c_0_ss_ep>; - }; - }; - - port@1 { - reg = <1>; - - ptn5150_out_ep: endpoint { - remote-endpoint = <&dwc3_0_ss_ep>; - }; + ptn5150_out_ep: endpoint { + remote-endpoint = <&dwc3_0_ep>; }; }; }; power-sensor@40 { - compatible = "ti,ina238"; - reg = <0x40>; - shunt-resistor = <20000>; /* 0.02 R */ - ti,shunt-gain = <1>; /* Drop cca. 40mV */ + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <20000>; /* 0.02 R */ + ti,shunt-gain = <1>; /* Drop cca. 40mV */ }; eeprom_board: eeprom@54 { @@ -253,10 +212,6 @@ }; }; -ðphy0g { - reg = <7>; -}; - &fec { /* Second ethernet */ pinctrl-0 = <&pinctrl_fec_rgmii>; phy-handle = <ðphypdk>; @@ -310,16 +265,7 @@ usb-role-switch; port { - #address-cells = <1>; - #size-cells = <0>; - - dwc3_0_hs_ep: endpoint@0 { - reg = <0>; - remote-endpoint = <&usb_c_0_hs_ep>; - }; - - dwc3_0_ss_ep: endpoint@1 { - reg = <1>; + dwc3_0_ep: endpoint { remote-endpoint = <&ptn5150_out_ep>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index cb1953d14a..d8963f32ec 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -25,9 +25,7 @@ reg_eth_vio: regulator-eth-vio { compatible = "regulator-fixed"; - gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pinctrl_enet_vio>; - pinctrl-names = "default"; + gpio = <&ioexp 2 GPIO_ACTIVE_LOW>; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; @@ -57,6 +55,11 @@ regulator-max-microvolt = <3300000>; regulator-name = "VDD_3P3V_AWO"; }; + + wlan_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&ioexp 1 GPIO_ACTIVE_LOW>; + }; }; &A53_0 { @@ -112,7 +115,7 @@ reg = <0>; reset-assert-us = <1000>; reset-deassert-us = <1000>; - reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>; /* Non-default PHY population option. */ status = "disabled"; }; @@ -128,7 +131,7 @@ reg = <5>; reset-assert-us = <1000>; reset-deassert-us = <1000>; - reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>; /* Default PHY population option. */ status = "okay"; }; @@ -293,6 +296,8 @@ }; buck2: BUCK2 { /* VDD_ARM */ + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1000000>; regulator-ramp-delay = <3125>; @@ -348,8 +353,9 @@ }; adc@48 { - compatible = "ti,tla2024"; + compatible = "ti,ads1015"; reg = <0x48>; + interrupts-extended = <&ioexp 7 IRQ_TYPE_EDGE_FALLING>; #address-cells = <1>; #size-cells = <0>; @@ -396,24 +402,42 @@ }; eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */ - compatible = "atmel,24c02"; - pagesize = <16>; + compatible = "atmel,24c32"; /* M24C32-D */ + pagesize = <32>; reg = <0x50>; }; rv3032: rtc@51 { compatible = "microcrystal,rv3032"; reg = <0x51>; - interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&ioexp 3 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */ - compatible = "atmel,24c02"; - pagesize = <16>; + compatible = "atmel,24c32"; /* M24C32-D */ + pagesize = <32>; reg = <0x53>; }; + + ioexp: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ioexp>; + wakeup-source; + + gpio-line-names = + "BT_REG_EN", "WL_REG_EN", "VIO_SWITCHED_#EN", "RTC_#INT", + "ENET_QOS_#RST", "RGB_OSZ_ENABLE", "USB1_ID", "ADC_ALTER_RDY", + "DHCOM-W", "DHCOM-V", "DHCOM-U", "DHCOM-T", + "BT_HOST_WAKE", "BT_DEV_WAKE", "", ""; + }; }; &i2c4 { @@ -463,6 +487,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; + wakeup-source; }; &uart2 { @@ -484,10 +509,8 @@ assigned-clock-rates = <80000000>; bluetooth { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_bt>; compatible = "cypress,cyw4373a0-bt"; - shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>; max-speed = <4000000>; }; }; @@ -514,8 +537,6 @@ }; &usb_dwc3_0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_vbus>; dr_mode = "otg"; status = "okay"; }; @@ -541,6 +562,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&buck4>; bus-width = <4>; non-removable; @@ -559,7 +581,6 @@ * connected to the SoC, but can be connected on to * SoC pin on the carrier board. */ - reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; }; @@ -601,8 +622,9 @@ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l - /* GPIO_M is connected to CLKOUT1 */ - &pinctrl_dhcom_int>; + &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o + &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r + &pinctrl_dhcom_s &pinctrl_dhcom_int>; pinctrl-names = "default"; pinctrl_dhcom_a: dhcom-a-grp { @@ -689,6 +711,55 @@ >; }; + pinctrl_dhcom_m: dhcom-m-grp { + fsl,pins = < + /* CSIx_MCLK */ + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x2 + >; + }; + + pinctrl_dhcom_n: dhcom-n-grp { + fsl,pins = < + /* CSI2_D3- */ + MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x2 + >; + }; + + pinctrl_dhcom_o: dhcom-o-grp { + fsl,pins = < + /* CSI2_D3+ */ + MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x2 + >; + }; + + pinctrl_dhcom_p: dhcom-p-grp { + fsl,pins = < + /* CSI2_D2- */ + MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x2 + >; + }; + + pinctrl_dhcom_q: dhcom-q-grp { + fsl,pins = < + /* CSI2_D2+ */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x2 + >; + }; + + pinctrl_dhcom_r: dhcom-r-grp { + fsl,pins = < + /* CSI2_D1- */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x2 + >; + }; + + pinctrl_dhcom_s: dhcom-s-grp { + fsl,pins = < + /* CSI2_D1+ */ + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x2 + >; + }; + pinctrl_dhcom_int: dhcom-int-grp { fsl,pins = < /* INT_HIGHEST_PRIO */ @@ -762,16 +833,8 @@ >; }; - pinctrl_enet_vio: dhcom-enet-vio-grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 - >; - }; - pinctrl_ethphy0: dhcom-ethphy0-grp { fsl,pins = < - /* ENET_QOS_#RST Reset */ - MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 /* ENET_QOS_#INT Interrupt */ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 >; @@ -897,6 +960,13 @@ >; }; + pinctrl_ioexp: dhcom-ioexp-grp { + fsl,pins = < + /* #GPIO_EXP_INT */ + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 + >; + }; + pinctrl_pmic: dhcom-pmic-grp { fsl,pins = < /* PMIC_nINT */ @@ -910,13 +980,6 @@ >; }; - pinctrl_rtc: dhcom-rtc-grp { - fsl,pins = < - /* RTC_#INT Interrupt */ - MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080 - >; - }; - pinctrl_tc9595: dhcom-tc9595-grp { fsl,pins = < /* RESET_DSIBRIDGE */ @@ -962,13 +1025,6 @@ >; }; - pinctrl_uart2_bt: dhcom-uart2-bt-grp { - fsl,pins = < - /* BT_REG_EN */ - MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 - >; - }; - pinctrl_uart3: dhcom-uart3-grp { fsl,pins = < MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49 @@ -985,12 +1041,6 @@ >; }; - pinctrl_usb0_vbus: dhcom-usb0-grp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0 - >; - }; - pinctrl_usb1_vbus: dhcom-usb1-grp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6 @@ -1006,8 +1056,6 @@ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - /* WL_REG_EN */ - MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 >; }; @@ -1019,8 +1067,6 @@ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 - /* WL_REG_EN */ - MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 >; }; @@ -1032,8 +1078,6 @@ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 - /* WL_REG_EN */ - MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 1e14c4cd31..c8640cac3e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -19,6 +19,36 @@ stdout-path = &uart1; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can1-stby"; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + gpio = <&gpio3 21 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can2-stby"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb1_host_vbus"; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -57,6 +87,21 @@ }; }; +/* CAN FD */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -101,6 +146,47 @@ status = "okay"; }; +/* USB1 Host mode Type-A */ +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +/* USB2 4-port USB3.0 HUB */ +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* RS232/RS485 */ +&uart2 { + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + /* SD-Card */ &usdhc2 { assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; @@ -115,6 +201,33 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "", "X_PMIC_WDOG_B", "", + "PMIC_SD_VSEL", "", "", "", "", "", + "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B"; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "nCAN1_EN", "nCAN2_EN"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < @@ -136,6 +249,32 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154 + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 @@ -163,6 +302,21 @@ >; }; + pinctrl_usb1_vbus: usb1vbusgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140 + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140 + >; + }; + pinctrl_usdhc2_pins: usdhc2-gpiogrp { fsl,pins = < MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index d8df97060e..c976c3b6cb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -199,6 +199,19 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "", "X_PMIC_WDOG_B", "", + "", "", "", "", "", "", + "", "", "", "", "", "X_nETHPHY_INT"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "X_PMIC_IRQ_B"; +}; + &iomuxc { pinctrl_fec: fecgrp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4240e20d38..258e90cc16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -168,6 +168,13 @@ enable-active-high; }; + reg_vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vcc_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -464,7 +471,7 @@ clock-names = "mclk"; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; - iov-supply = <®_vcc_3v3>; + iov-supply = <®_vcc_1v8>; ldoin-supply = <®_vcc_3v3>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi index c531564c7e..bf47b5e9dd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi @@ -78,7 +78,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio4>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi index f3bab22d5e..f942e94908 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi @@ -113,7 +113,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio4>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi index 68c62def4c..b0d42b18c5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi @@ -95,8 +95,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio4 { @@ -125,7 +132,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio4>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso new file mode 100644 index 0000000000..270a9114da --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mp-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp"; + + reg_cam: regulator-cam { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_cam>; + compatible = "regulator-fixed"; + regulator-name = "reg_cam"; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + cam24m: cam24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "cam24m"; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&cam24m>; + VDIG-supply = <®_cam>; + + port { + /* MIPI CSI-2 bus endpoint */ + imx219_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi_0_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; +}; + +&isi_0 { + status = "okay"; +}; + +&mipi_csi_0 { + status = "okay"; + + ports { + port@0 { + mipi_csi_0_in: endpoint { + remote-endpoint = <&imx219_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_reg_cam: regcamgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index faa370a588..2ab9f4cc12 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -461,7 +461,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; switch: switch@5f { @@ -512,7 +511,6 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <&fec>; phy-mode = "rgmii-id"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index e9e4fcb562..04f2083c4a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -184,7 +184,6 @@ &eqos { phy-handle = <ðphy0>; phy-mode = "rgmii-id"; - phy-supply = <®_module_eth1phy>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; snps,force_thresh_dma_mode; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 4b50920ac2..1264da6012 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -202,6 +202,60 @@ clock-output-names = "clk_ext4"; }; + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ca_funnel_in_port0: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + + ca_funnel_in_port2: endpoint { + remote-endpoint = <&etm2_out_port>; + }; + }; + + port@3 { + reg = <3>; + + ca_funnel_in_port3: endpoint { + remote-endpoint = <&etm3_out_port>; + }; + }; + }; + + out-ports { + port { + + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -368,59 +422,6 @@ }; }; - funnel { - /* - * non-configurable funnel don't show up on the AMBA - * bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-static-funnel"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - ca_funnel_in_port0: endpoint { - remote-endpoint = <&etm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - - ca_funnel_in_port1: endpoint { - remote-endpoint = <&etm1_out_port>; - }; - }; - - port@2 { - reg = <2>; - - ca_funnel_in_port2: endpoint { - remote-endpoint = <&etm2_out_port>; - }; - }; - - port@3 { - reg = <3>; - - ca_funnel_in_port3: endpoint { - remote-endpoint = <&etm3_out_port>; - }; - }; - }; - - out-ports { - port { - ca_funnel_out_port0: endpoint { - remote-endpoint = <&hugo_funnel_in_port0>; - }; - }; - }; - }; - funnel@28c03000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x28c03000 0x1000>; @@ -1459,6 +1460,47 @@ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + easrc: easrc@30c90000 { + compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc"; + reg = <0x30c90000 0x10000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; + status = "disabled"; + }; + + micfil: audio-controller@30ca0000 { + compatible = "fsl,imx8mp-micfil"; + reg = <0x30ca0000 0x10000>; + #sound-dai-cells = <0>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_SEL>, + <&clk IMX8MP_AUDIO_PLL1_OUT>, + <&clk IMX8MP_AUDIO_PLL2_OUT>, + <&clk IMX8MP_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; + }; sdma3: dma-controller@30e00000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 138a4d36a7..ffb5fe6163 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -381,7 +381,7 @@ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; input; - lane-mapping = "pmic-5v"; + line-name = "pmic-5v"; }; }; @@ -1001,7 +1001,7 @@ }; regulator@3e { - compatible = "tps65132"; + compatible = "ti,tps65132"; reg = <0x3e>; reg_lcd_avdd: outp { @@ -1154,15 +1154,12 @@ pinctrl-0 = <&pinctrl_charger_in>; interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - phys = <&usb3_phy0>; ti,battery-regulation-voltage = <4208000>; /* uV */ ti,termination-current = <128000>; /* uA */ ti,precharge-current = <128000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ ti,boost-max-current = <1500000>; /* uA */ - ti,use-vinmin-threshold = <1>; /* enable VINDPM */ - ti,vinmin-threshold = <3900000>; /* uV */ monitored-battery = <&bat>; power-supplies = <&typec_pd>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 8614c18b59..767819cce8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -142,7 +142,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c1a: i2c1@0 { + i2c1a: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -159,7 +159,7 @@ }; }; - i2c1b: i2c1@1 { + i2c1b: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -176,7 +176,7 @@ }; }; - i2c1c: i2c1@2 { + i2c1c: i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; @@ -193,7 +193,7 @@ }; }; - i2c1d: i2c1@3 { + i2c1d: i2c@3 { reg = <3>; #address-cells = <1>; #size-cells = <0>; @@ -222,7 +222,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c4@0 { + i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -257,14 +257,14 @@ }; }; - ddc_i2c_bus: i2c4@1 { + ddc_i2c_bus: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; }; - i2c4@3 { + i2c@3 { reg = <3>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts index 89cbec5c41..ec89b5adeb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -67,12 +67,12 @@ compatible = "rohm,bd71837"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; + #clock-cells = <0>; clocks = <&pmic_osc>; clock-names = "osc"; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "irq"; regulators { buck1: BUCK1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts index 6e6182709d..eaa9d0c0fc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts @@ -107,7 +107,7 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi_reg_on>; - gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso new file mode 100644 index 0000000000..306977d6ba --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2019-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq"; +}; + +&backlight_lvds { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi_lvds_bridge { + status = "okay"; +}; + +&expander0 { + dsi-mux-oe-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-high; + line-name = "DSI_MUX_OE#"; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "tianma,tm070jvhg33"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index cb777b47ba..0c960efd9b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -15,7 +15,7 @@ stdout-path = &uart1; }; - mdio0: bitbang-mdio { + mdio0: mdio { compatible = "virtual,mdio-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 052ba9baa4..c6dc3ba0d4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -225,6 +225,59 @@ }; }; + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ca_funnel_in_port0: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + + ca_funnel_in_port2: endpoint { + remote-endpoint = <&etm2_out_port>; + }; + }; + + port@3 { + reg = <3>; + + ca_funnel_in_port3: endpoint { + remote-endpoint = <&etm3_out_port>; + }; + }; + }; + + out-ports { + port { + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -394,59 +447,6 @@ }; }; - funnel { - /* - * non-configurable funnel don't show up on the AMBA - * bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-static-funnel"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - ca_funnel_in_port0: endpoint { - remote-endpoint = <&etm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - - ca_funnel_in_port1: endpoint { - remote-endpoint = <&etm1_out_port>; - }; - }; - - port@2 { - reg = <2>; - - ca_funnel_in_port2: endpoint { - remote-endpoint = <&etm2_out_port>; - }; - }; - - port@3 { - reg = <3>; - - ca_funnel_in_port3: endpoint { - remote-endpoint = <&etm3_out_port>; - }; - }; - }; - - out-ports { - port { - ca_funnel_out_port0: endpoint { - remote-endpoint = <&hugo_funnel_in_port0>; - }; - }; - }; - }; - funnel@28c03000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x28c03000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi index 1c6af9f549..4d6427fbe8 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi @@ -21,7 +21,6 @@ * this PHY model. Use delay on MAC side instead. */ &fec1 { - fsl,rgmii_txc_dly; phy-mode = "rgmii-rxid"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 0b34cc2250..6d50838ad1 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -47,6 +47,18 @@ status = "okay"; }; +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -118,6 +130,20 @@ >; }; + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QM_UART0_RTS_B_DMA_UART2_RX 0x06000020 + IMX8QM_UART0_CTS_B_DMA_UART2_TX 0x06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QM_M41_GPIO0_00_DMA_UART3_RX 0x06000020 + IMX8QM_M41_GPIO0_01_DMA_UART3_TX 0x06000020 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index e9b198c13b..8439dd6b39 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -44,6 +44,69 @@ }; }; +&edma2 { + reg = <0x5a1f0000 0x170000>; + #dma-cells = <3>; + dma-channels = <22>; + dma-channel-mask = <0xf00>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */ + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */ + <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_DMA_0_CH0>, + <&pd IMX_SC_R_DMA_0_CH1>, + <&pd IMX_SC_R_DMA_0_CH2>, + <&pd IMX_SC_R_DMA_0_CH3>, + <&pd IMX_SC_R_DMA_0_CH4>, + <&pd IMX_SC_R_DMA_0_CH5>, + <&pd IMX_SC_R_DMA_0_CH6>, + <&pd IMX_SC_R_DMA_0_CH7>, + <&pd IMX_SC_R_DMA_0_CH8>, + <&pd IMX_SC_R_DMA_0_CH9>, + <&pd IMX_SC_R_DMA_0_CH10>, + <&pd IMX_SC_R_DMA_0_CH11>, + <&pd IMX_SC_R_DMA_0_CH12>, + <&pd IMX_SC_R_DMA_0_CH13>, + <&pd IMX_SC_R_DMA_0_CH14>, + <&pd IMX_SC_R_DMA_0_CH15>, + <&pd IMX_SC_R_DMA_0_CH16>, + <&pd IMX_SC_R_DMA_0_CH17>, + <&pd IMX_SC_R_DMA_0_CH18>, + <&pd IMX_SC_R_DMA_0_CH19>, + <&pd IMX_SC_R_DMA_0_CH20>, + <&pd IMX_SC_R_DMA_0_CH21>; + status = "okay"; +}; + +&edma3 { + power-domains = <&pd IMX_SC_R_DMA_1_CH0>, + <&pd IMX_SC_R_DMA_1_CH1>, + <&pd IMX_SC_R_DMA_1_CH2>, + <&pd IMX_SC_R_DMA_1_CH3>, + <&pd IMX_SC_R_DMA_1_CH4>, + <&pd IMX_SC_R_DMA_1_CH5>, + <&pd IMX_SC_R_DMA_1_CH6>, + <&pd IMX_SC_R_DMA_1_CH7>; +}; + &flexcan1 { fsl,clk-source = /bits/ 8 <1>; }; @@ -64,18 +127,22 @@ &lpuart0 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; + dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; }; &lpuart1 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; + dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; }; &lpuart2 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; + dmas = <&edma2 17 0 0>, <&edma2 16 0 1>; }; &lpuart3 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; + dmas = <&edma2 19 0 0>, <&edma2 18 0 1>; }; &i2c0 { diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 7924b0969a..9961172994 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -187,6 +187,18 @@ status = "okay"; }; +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + &mu_m0 { status = "okay"; }; @@ -340,6 +352,20 @@ >; }; + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 + >; + }; + pinctrl_typec: typecgrp { fsl,pins = < IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 8a6596d5a5..c4a0082f30 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -360,7 +360,7 @@ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>, <&pcc4 IMX8ULP_CLK_FLEXSPI2>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>; assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>; status = "disabled"; @@ -483,12 +483,13 @@ }; }; - gpioe: gpio@2d000080 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x2d000080 0x1000>, <0x2d000040 0x40>; + gpioe: gpio@2d000000 { + compatible = "fsl,imx8ulp-gpio"; + reg = <0x2d000000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>, @@ -497,12 +498,13 @@ gpio-ranges = <&iomuxc1 0 32 24>; }; - gpiof: gpio@2d010080 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x2d010080 0x1000>, <0x2d010040 0x40>; + gpiof: gpio@2d010000 { + compatible = "fsl,imx8ulp-gpio"; + reg = <0x2d010000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>, @@ -532,12 +534,13 @@ }; }; - gpiod: gpio@2e200080 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x2e200080 0x1000>, <0x2e200040 0x40>; + gpiod: gpio@2e200000 { + compatible = "fsl,imx8ulp-gpio"; + reg = <0x2e200000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>, diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi index 98202a4370..58ec0b399c 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi @@ -23,11 +23,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>; - pinctrl_enable_3v3_vmmc: enable_3v3_vmmc { + pinctrl_enable_3v3_vmmc: enable-3v3-vmmc-grp { fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20>; /* SODIMM 100 */ }; - pinctrl_lvds_converter: lcd-lvds { + pinctrl_lvds_converter: lvds-converter-grp { fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x20>, /* SODIMM 55 */ /* 6B/8B mode. Select LOW - 8B mode (24bit) */ <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x20>, /* SODIMM 63 */ diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index cafd39130e..2b9d47716f 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -149,6 +149,12 @@ status = "okay"; }; +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -222,6 +228,15 @@ >; }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 943b7e6655..34c0540276 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -185,6 +185,46 @@ #size-cells = <1>; ranges; + edma1: dma-controller@44000000 { + compatible = "fsl,imx93-edma3"; + reg = <0x44000000 0x200000>; + #dma-cells = <3>; + dma-channels = <31>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, // 0: Reserved + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, // 1: CANFD1 + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, // 2: Reserved + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, // 3: GPIO1 CH0 + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, // 4: GPIO1 CH1 + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, // 5: I3C1 TO Bus + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, // 6: I3C1 From Bus + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, // 7: LPI2C1 M TX + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, // 8: LPI2C1 S TX + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, // 9: LPI2C2 M RX + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1 + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400 + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2 + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3 + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2 + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3 + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1 + clocks = <&clk IMX93_CLK_EDMA1_GATE>; + clock-names = "dma"; + }; + aonmix_ns_gpr: syscon@44210000 { compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; reg = <0x44210000 0x1000>; @@ -296,6 +336,8 @@ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART1_GATE>; clock-names = "ipg"; + dmas = <&edma1 17 0 1>, <&edma1 16 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -305,6 +347,8 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART2_GATE>; clock-names = "ipg"; + dmas = <&edma1 19 0 1>, <&edma1 18 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -386,6 +430,7 @@ tmu: tmu@44482000 { compatible = "fsl,qoriq-tmu"; reg = <0x44482000 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_TMC_GATE>; little-endian; fsl,tmu-range = <0x800000da 0x800000e9 @@ -424,6 +469,80 @@ #size-cells = <1>; ranges; + edma2: dma-controller@42000000 { + compatible = "fsl,imx93-edma4"; + reg = <0x42000000 0x210000>; + #dma-cells = <3>; + shared-interrupt; + dma-channels = <64>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_EDMA2_GATE>; + clock-names = "dma"; + }; + wakeupmix_gpr: syscon@42420000 { compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; reg = <0x42420000 0x1000>; @@ -551,6 +670,8 @@ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART3_GATE>; clock-names = "ipg"; + dmas = <&edma2 18 0 1>, <&edma2 17 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -560,6 +681,8 @@ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART4_GATE>; clock-names = "ipg"; + dmas = <&edma2 20 0 1>, <&edma2 19 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -569,6 +692,8 @@ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART5_GATE>; clock-names = "ipg"; + dmas = <&edma2 22 0 1>, <&edma2 21 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -578,6 +703,8 @@ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART6_GATE>; clock-names = "ipg"; + dmas = <&edma2 24 0 1>, <&edma2 23 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -617,6 +744,8 @@ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART7_GATE>; clock-names = "ipg"; + dmas = <&edma2 88 0 1>, <&edma2 87 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -626,6 +755,8 @@ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART8_GATE>; clock-names = "ipg"; + dmas = <&edma2 90 0 1>, <&edma2 89 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -826,12 +957,13 @@ }; }; - gpio2: gpio@43810080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43810080 0x1000>, <0x43810040 0x40>; + gpio2: gpio@43810000 { + compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; + reg = <0x43810000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&clk IMX93_CLK_GPIO2_GATE>, @@ -840,12 +972,13 @@ gpio-ranges = <&iomuxc 0 4 30>; }; - gpio3: gpio@43820080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43820080 0x1000>, <0x43820040 0x40>; + gpio3: gpio@43820000 { + compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; + reg = <0x43820000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&clk IMX93_CLK_GPIO3_GATE>, @@ -855,12 +988,13 @@ <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; }; - gpio4: gpio@43830080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43830080 0x1000>, <0x43830040 0x40>; + gpio4: gpio@43830000 { + compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; + reg = <0x43830000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&clk IMX93_CLK_GPIO4_GATE>, @@ -869,12 +1003,13 @@ gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; }; - gpio1: gpio@47400080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x47400080 0x1000>, <0x47400040 0x40>; + gpio1: gpio@47400000 { + compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; + reg = <0x47400000 0x1000>; gpio-controller; #gpio-cells = <2>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; clocks = <&clk IMX93_CLK_GPIO1_GATE>, diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 8a9fe5cdcc..e2bc53b8d3 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -8,6 +8,16 @@ /* TQ-Systems GmbH MBa8Mx baseboard */ / { + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_12v>; + enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + beeper { compatible = "pwm-beeper"; pwms = <&pwm4 0 250000 0>; @@ -65,12 +75,45 @@ }; }; + gpio_delays: gpio-delays { + compatible = "gpio-delay"; + #gpio-cells = <3>; + gpio-controller; + gpios = <&expander0 6 GPIO_ACTIVE_HIGH>; + gpio-line-names = "LVDS_BRIDGE_EN_1V8"; + }; + + panel: panel-lvds { + /* + * Display is not fixed, so compatible has to be added from + * DT overlay + */ + backlight = <&backlight_lvds>; + power-supply = <®_vcc_3v3>; + status = "disabled"; + + port { + panel_in_lvds: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&lvds_bridge_out>; + }; + }; + }; + pcie0_refclk: pcie0-refclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; }; + reg_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "MBA8MX_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + reg_hub_vbus: regulator-hub-vbus { compatible = "regulator-fixed"; regulator-name = "MBA8MX_HUB_VBUS"; @@ -157,6 +200,10 @@ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + gpio-line-names = "", "", "", "", + "", "", "LVDS_BRIDGE_EN", "", + "", "", "", "", + "", "", "", ""; sd-mux-oe-hog { gpio-hog; @@ -227,6 +274,52 @@ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + + dsi_lvds_bridge: bridge@2d { + compatible = "ti,sn65dsi84"; + reg = <0x2d>; + enable-gpios = <&gpio_delays 0 130000 0>; + vcc-supply = <®_sn65dsi83_1v8>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_bridge_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds_bridge_out: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; +}; + +&mipi_dsi { + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <20000000>; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&lvds_bridge_in>; + }; + }; + }; }; &pwm3 { diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi new file mode 100644 index 0000000000..4c38dd5411 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections) + */ + +#include <dt-bindings/net/ti-dp83867.h> + +&enet0 { + status = "disabled"; +}; + +&enet1 { + status = "disabled"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&enet3 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&enet4 { + status = "disabled"; +}; + +&enet5 { + status = "disabled"; +}; + +&enet6 { + status = "disabled"; +}; + +&mdio0 { + status = "okay"; + + qsgmii2_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x00>; + }; + + qsgmii2_phy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x01>; + }; + + qsgmii2_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x02>; + }; + + qsgmii2_phy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + }; + + rgmii_phy2: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + rgmii_phy1: ethernet-phy@e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0e>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + qsgmii1_phy1: ethernet-phy@1c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1c>; + }; + + qsgmii1_phy2: ethernet-phy@1d { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1d>; + }; + + qsgmii1_phy3: ethernet-phy@1e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1e>; + }; + + qsgmii1_phy4: ethernet-phy@1f { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1f>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi new file mode 100644 index 0000000000..2471bb109e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for MBLS10xxA from TQ (MC related sections) + */ + +#include <dt-bindings/net/ti-dp83867.h> + +/ { + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>; + }; + + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>; + }; +}; + +&dpmac1 { + pcs-handle = <&pcs1>; +}; + +&dpmac2 { + pcs-handle = <&pcs2>; +}; + +&dpmac3 { + pcs-handle = <&pcs3_0>; +}; + +&dpmac4 { + pcs-handle = <&pcs3_1>; +}; + +&dpmac5 { + pcs-handle = <&pcs3_2>; +}; + +&dpmac6 { + pcs-handle = <&pcs3_3>; +}; + +&dpmac7 { + pcs-handle = <&pcs7_0>; +}; + +&dpmac8 { + pcs-handle = <&pcs7_1>; +}; + +&dpmac9 { + pcs-handle = <&pcs7_2>; +}; + +&dpmac10 { + pcs-handle = <&pcs7_3>; +}; + +&emdio1 { + status = "okay"; + + qsgmii2_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x00>; + }; + + qsgmii2_phy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x01>; + }; + + qsgmii2_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x02>; + }; + + qsgmii2_phy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + }; + + rgmii_phy2: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + rgmii_phy1: ethernet-phy@e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0e>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + qsgmii1_phy1: ethernet-phy@1c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1c>; + }; + + qsgmii1_phy2: ethernet-phy@1d { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1d>; + }; + + qsgmii1_phy3: ethernet-phy@1e { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1e>; + }; + + qsgmii1_phy4: ethernet-phy@1f { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1f>; + }; +}; + +&pcs_mdio1 { + status = "okay"; +}; + +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi new file mode 100644 index 0000000000..65b4ed28a3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for MBLS10xxA from TQ + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + autorepeat; + + button-0 { + label = "button0"; + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F1>; + }; + + button-1 { + label = "button1"; + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F2>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-user { + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&esdhc { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + gpioexp1: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpioexp2: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpioexp3: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + sfp1_i2c: i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sfp2_i2c: i2c@2 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c@3 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi new file mode 100644 index 0000000000..138f8778af --- /dev/null +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger, Timo Herbrecher + * + * Device Tree Include file for TQMLs10xxA SoM of TQ + */ + +/ { + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + eeprom@50 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + vcc-supply = <®_vcc3v3>; + read-only; + }; + + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&esdhc { + /* eSDHC or eMMC: set by bootloader */ + non-removable; + disable-wp; + mmc-hs200-1_8v; + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; +}; diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi index 62d03ffa94..b5e042b8e9 100644 --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -144,7 +144,7 @@ clocks = <&cnm_clock>; clock-names = "core"; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency=<100000>; + clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c0_pins>; @@ -163,7 +163,7 @@ clocks = <&cnm_clock>; clock-names = "core"; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency=<100000>; + clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts index 57fc698e55..d6d37a1f6f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts @@ -12,3 +12,50 @@ ð0 { phy-mode = "2500base-x"; }; + +/* + * External MV88E6361 switch is only available on v2 of the board. + * U-Boot will enable the MDIO bus and switch nodes. + */ +&mdio { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + + /* Actual device is MV88E6361 */ + switch: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð0>; + }; + + port@9 { + reg = <9>; + label = "downlink"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + port@a { + reg = <10>; + label = "uplink"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index f9abef8dcc..870bb380a4 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -126,32 +126,32 @@ reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; - ports { - switch0port1: port@1 { + ethernet-ports { + switch0port1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&switch0phy2>; }; - switch0port4: port@4 { + switch0port4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - switch0port5: port@5 { + switch0port5: ethernet-port@5 { reg = <5>; label = "wan"; phy-handle = <&extphy>; @@ -160,7 +160,7 @@ }; mdio { - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 5fc613d241..fed2dcecb3 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -13,7 +13,7 @@ / { aliases { ethernet0 = ð0; - /* for dsa slave device */ + /* for DSA user port device */ ethernet1 = &switch0port1; ethernet2 = &switch0port2; ethernet3 = &switch0port3; @@ -145,19 +145,17 @@ }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - switch0port0: port@0 { + switch0port0: ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -168,19 +166,19 @@ }; }; - switch0port1: port@1 { + switch0port1: ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -192,13 +190,13 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index b1b45b4fa9..63fbc83521 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -152,31 +152,29 @@ }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports: ports { + ports: ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; @@ -185,7 +183,7 @@ nvmem-cell-names = "mac-address"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -199,13 +197,13 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 805ef2d79b..4249acdec5 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -304,7 +304,13 @@ reg = <1>; }; - /* switch nodes are enabled by U-Boot if modules are present */ + /* + * NOTE: switch nodes are enabled by U-Boot if modules are present + * DO NOT change this node name (switch0@10) even if it is not following + * conventions! Deployed U-Boot binaries are explicitly looking for + * this node in order to augment the device tree! + * Also do not touch the "ports" or "port@n" nodes. These are also ABI. + */ switch0@10 { compatible = "marvell,mv88e6190"; reg = <0x10>; @@ -317,35 +323,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -430,6 +436,7 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch0@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -442,19 +449,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1_topaz: switch0phy1@11 { + switch0phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch0phy2_topaz: switch0phy2@12 { + switch0phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch0phy3_topaz: switch0phy3@13 { + switch0phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch0phy4_topaz: switch0phy4@14 { + switch0phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -497,6 +504,7 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@11 { compatible = "marvell,mv88e6190"; reg = <0x11>; @@ -509,35 +517,35 @@ #address-cells = <1>; #size-cells = <0>; - switch1phy1: switch1phy1@1 { + switch1phy1: ethernet-phy@1 { reg = <0x1>; }; - switch1phy2: switch1phy2@2 { + switch1phy2: ethernet-phy@2 { reg = <0x2>; }; - switch1phy3: switch1phy3@3 { + switch1phy3: ethernet-phy@3 { reg = <0x3>; }; - switch1phy4: switch1phy4@4 { + switch1phy4: ethernet-phy@4 { reg = <0x4>; }; - switch1phy5: switch1phy5@5 { + switch1phy5: ethernet-phy@5 { reg = <0x5>; }; - switch1phy6: switch1phy6@6 { + switch1phy6: ethernet-phy@6 { reg = <0x6>; }; - switch1phy7: switch1phy7@7 { + switch1phy7: ethernet-phy@7 { reg = <0x7>; }; - switch1phy8: switch1phy8@8 { + switch1phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -622,6 +630,7 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -634,19 +643,19 @@ #address-cells = <1>; #size-cells = <0>; - switch1phy1_topaz: switch1phy1@11 { + switch1phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch1phy2_topaz: switch1phy2@12 { + switch1phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch1phy3_topaz: switch1phy3@13 { + switch1phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch1phy4_topaz: switch1phy4@14 { + switch1phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -689,6 +698,7 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@12 { compatible = "marvell,mv88e6190"; reg = <0x12>; @@ -701,35 +711,35 @@ #address-cells = <1>; #size-cells = <0>; - switch2phy1: switch2phy1@1 { + switch2phy1: ethernet-phy@1 { reg = <0x1>; }; - switch2phy2: switch2phy2@2 { + switch2phy2: ethernet-phy@2 { reg = <0x2>; }; - switch2phy3: switch2phy3@3 { + switch2phy3: ethernet-phy@3 { reg = <0x3>; }; - switch2phy4: switch2phy4@4 { + switch2phy4: ethernet-phy@4 { reg = <0x4>; }; - switch2phy5: switch2phy5@5 { + switch2phy5: ethernet-phy@5 { reg = <0x5>; }; - switch2phy6: switch2phy6@6 { + switch2phy6: ethernet-phy@6 { reg = <0x6>; }; - switch2phy7: switch2phy7@7 { + switch2phy7: ethernet-phy@7 { reg = <0x7>; }; - switch2phy8: switch2phy8@8 { + switch2phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -805,6 +815,7 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -817,19 +828,19 @@ #address-cells = <1>; #size-cells = <0>; - switch2phy1_topaz: switch2phy1@11 { + switch2phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch2phy2_topaz: switch2phy2@12 { + switch2phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch2phy3_topaz: switch2phy3@13 { + switch2phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch2phy4_topaz: switch2phy4@14 { + switch2phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi index 3f79923376..3a9b690718 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -61,10 +61,10 @@ sfp_eth1: sfp-eth1 { compatible = "sff,sfp"; i2c-bus = <&i2c1>; - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 48202810bf..40b7ee7ead 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -301,10 +301,8 @@ }; /* 88E6141 Topaz switch */ - switch: switch@3 { + switch: ethernet-switch@3 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <3>; pinctrl-names = "default"; @@ -314,35 +312,35 @@ interrupt-parent = <&cp0_gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - swport1: port@1 { + swport1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&swphy1>; }; - swport2: port@2 { + swport2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&swphy2>; }; - swport3: port@3 { + swport3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&swphy3>; }; - swport4: port@4 { + swport4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&swphy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp0_eth1>; @@ -355,19 +353,19 @@ #address-cells = <1>; #size-cells = <0>; - swphy1: swphy1@17 { + swphy1: ethernet-phy@17 { reg = <17>; }; - swphy2: swphy2@18 { + swphy2: ethernet-phy@18 { reg = <18>; }; - swphy3: swphy3@19 { + swphy3: ethernet-phy@19 { reg = <19>; }; - swphy4: swphy4@20 { + swphy4: ethernet-phy@20 { reg = <20>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 4125202028..67892f0d28 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -497,42 +497,42 @@ reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -545,19 +545,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 47d45ff3d6..6fcc34f7b4 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -207,11 +207,9 @@ reg = <0>; }; - switch6: switch0@6 { + switch6: ethernet-switch@6 { /* Actual device is MV88E6393X */ compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; reg = <6>; interrupt-parent = <&cp0_gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -220,59 +218,59 @@ dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "p1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "p2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "p3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "p4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "p5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "p6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "p7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "p8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "p9"; phy-mode = "10gbase-r"; @@ -280,7 +278,7 @@ managed = "in-band-status"; }; - port@a { + ethernet-port@a { reg = <10>; ethernet = <&cp0_eth0>; phy-mode = "10gbase-r"; @@ -293,35 +291,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index c99c3372a4..e6e7592a36 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -45,7 +45,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r4.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb @@ -53,4 +55,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts index b5746e6d0b..7364c72782 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts @@ -22,6 +22,23 @@ serial1 = &uart1; }; + backlight_lcd0: backlight { + compatible = "led-backlight"; + leds = <&disp_led_pwm>, <&pmic_bl_led>; + + default-brightness-level = <300>; + }; + + led-controller-display { + compatible = "pwm-leds"; + + disp_led_pwm: led-0 { + label = "backlight-pwm"; + pwms = <&pwm0 0 500000>; + max-brightness = <1024>; + }; + }; + memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x1e800000>; @@ -49,6 +66,65 @@ no-map; }; }; + + vreg_disp_avdd: regulator-disp-avdd { + compatible = "regulator-fixed"; + regulator-name = "disp_avdd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 138 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_disp_avee: regulator-disp-avee { + compatible = "regulator-fixed"; + regulator-name = "disp_avee"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 139 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_disp_vddh: regulator-disp-vddh { + compatible = "regulator-fixed"; + regulator-name = "disp_vddh"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + panel: panel@0 { + compatible = "sharp,ls060t1sx01"; + reg = <0>; + avdd-supply = <&vreg_disp_avdd>; + avee-supply = <&vreg_disp_avee>; + vddi-supply = <&mt6331_vgp3_reg>; + vddh-supply = <&vreg_disp_vddh>; + reset-gpios = <&pio 106 GPIO_ACTIVE_LOW>; + backlight = <&backlight_lcd0>; + + pinctrl-0 = <&disp_rst_pins>; + pinctrl-names = "default"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + port { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &fhctl { @@ -163,7 +239,17 @@ status = "okay"; }; +&mt6331_vgp3_reg { + regulator-min-microvolt = <1800000>; +}; + &pio { + disp_rst_pins: lcm-pins { + pins-rst { + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; + }; + }; + mmc0_pins_default: emmc-sdr-pins { pins-cmd-dat { pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, @@ -338,6 +424,21 @@ * an interrupt on the companion, so we use the MT6332 IRQ GPIO. */ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + + mt6332-led { + compatible = "mediatek,mt6332-led"; + #address-cells = <1>; + #size-cells = <0>; + + pmic_bl_led: led@0 { + reg = <0>; + label = "backlight-pmic"; + }; + }; +}; + +&pwm0 { + status = "okay"; }; &uart0 { diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index 597bce2fed..e5e269a660 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2015 MediaTek Inc. - * Author: Mars.C <mars.cheng@mediatek.com> + * Copyright (C) 2023 Collabora Ltd. + * Authors: Mars.C <mars.cheng@mediatek.com> + * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> */ #include <dt-bindings/interrupt-controller/irq.h> @@ -19,6 +21,23 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + ovl0 = &ovl0; + ovl1 = &ovl1; + rdma0 = &rdma0; + rdma1 = &rdma1; + rdma2 = &rdma2; + wdma0 = &wdma0; + wdma1 = &wdma1; + color0 = &color0; + color1 = &color1; + split0 = &split0; + split1 = &split1; + dpi0 = &dpi0; + dsi0 = &dsi0; + dsi1 = &dsi1; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -434,6 +453,26 @@ #mbox-cells = <2>; }; + mipi_tx0: dsi-phy@10215000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0 0x10215000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + mipi_tx1: dsi-phy@10216000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0 0x10216000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx1_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -690,6 +729,211 @@ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; + ovl0: ovl@1400c000 { + compatible = "mediatek,mt6795-disp-ovl", "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu M4U_PORT_DISP_OVL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + }; + + ovl1: ovl@1400d000 { + compatible = "mediatek,mt6795-disp-ovl", "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL1>; + iommus = <&iommu M4U_PORT_DISP_OVL1>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; + }; + + rdma0: rdma@1400e000 { + compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu M4U_PORT_DISP_RDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + }; + + rdma1: rdma@1400f000 { + compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA1>; + iommus = <&iommu M4U_PORT_DISP_RDMA1>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; + }; + + rdma2: rdma@14010000 { + compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma"; + reg = <0 0x14010000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA2>; + iommus = <&iommu M4U_PORT_DISP_RDMA2>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>; + }; + + wdma0: wdma@14011000 { + compatible = "mediatek,mt6795-disp-wdma", "mediatek,mt8173-disp-wdma"; + reg = <0 0x14011000 0 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA0>; + iommus = <&iommu M4U_PORT_DISP_WDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; + }; + + wdma1: wdma@14012000 { + compatible = "mediatek,mt6795-disp-wdma", "mediatek,mt8173-disp-wdma"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA1>; + iommus = <&iommu M4U_PORT_DISP_WDMA1>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; + }; + + color0: color@14013000 { + compatible = "mediatek,mt6795-disp-color", "mediatek,mt8173-disp-color"; + reg = <0 0x14013000 0 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>; + }; + + color1: color@14014000 { + compatible = "mediatek,mt6795-disp-color", "mediatek,mt8173-disp-color"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR1>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>; + }; + + aal@14015000 { + compatible = "mediatek,mt6795-disp-aal", "mediatek,mt8173-disp-aal"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_AAL>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + }; + + gamma@14016000 { + compatible = "mediatek,mt6795-disp-gamma", "mediatek,mt8173-disp-gamma"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_GAMMA>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>; + }; + + merge@14017000 { + compatible = "mediatek,mt6795-disp-merge", "mediatek,mt8173-disp-merge"; + reg = <0 0x14017000 0 0x1000>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_MERGE>; + }; + + split0: split@14018000 { + compatible = "mediatek,mt6795-disp-split", "mediatek,mt8173-disp-split"; + reg = <0 0x14018000 0 0x1000>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_SPLIT0>; + }; + + split1: split@14019000 { + compatible = "mediatek,mt6795-disp-split", "mediatek,mt8173-disp-split"; + reg = <0 0x14019000 0 0x1000>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_SPLIT1>; + }; + + ufoe@1401a000 { + compatible = "mediatek,mt6795-disp-ufoe", "mediatek,mt8173-disp-ufoe"; + reg = <0 0x1401a000 0 0x1000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_UFOE>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>; + }; + + dsi0: dsi@1401b000 { + compatible = "mediatek,mt6795-dsi", "mediatek,mt8173-dsi"; + reg = <0 0x1401b000 0 0x1000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DSI0_ENGINE>, + <&mmsys CLK_MM_DSI0_DIGITAL>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + }; + + dsi1: dsi@1401c000 { + compatible = "mediatek,mt6795-dsi", "mediatek,mt8173-dsi"; + reg = <0 0x1401c000 0 0x1000>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DSI1_ENGINE>, + <&mmsys CLK_MM_DSI1_DIGITAL>, + <&mipi_tx1>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx1>; + phy-names = "dphy"; + status = "disabled"; + }; + + dpi0: dpi@1401d000 { + compatible = "mediatek,mt6795-dpi", "mediatek,mt8183-dpi"; + reg = <0 0x1401d000 0 0x1000>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DPI_PIXEL>, + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + status = "disabled"; + }; + + pwm0: pwm@1401e000 { + compatible = "mediatek,mt6795-disp-pwm", "mediatek,mt8173-disp-pwm"; + reg = <0 0x1401e000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM026M>, <&mmsys CLK_MM_DISP_PWM0MM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + pwm1: pwm@1401f000 { + compatible = "mediatek,mt6795-disp-pwm", "mediatek,mt8173-disp-pwm"; + reg = <0 0x1401f000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM126M>, <&mmsys CLK_MM_DISP_PWM1MM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + mutex: mutex@14020000 { + compatible = "mediatek,mt8173-disp-mutex"; + reg = <0 0x14020000 0 0x1000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT6795_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; + mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, + <CMDQ_EVENT_MUTEX1_STREAM_EOF>; + mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>; + }; + larb0: larb@14021000 { compatible = "mediatek,mt6795-smi-larb"; reg = <0 0x14021000 0 0x1000>; @@ -708,6 +952,13 @@ clock-names = "apb", "smi"; }; + od@14023000 { + compatible = "mediatek,mt6795-disp-od", "mediatek,mt8173-disp-od"; + reg = <0 0x14023000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_OD>; + mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>; + }; + larb2: larb@15001000 { compatible = "mediatek,mt6795-smi-larb"; reg = <0 0x15001000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 94e1cc9fbe..c46682150e 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -385,9 +385,9 @@ i2s1_pins: i2s1-pins { mux { function = "i2s"; - groups = "i2s_out_mclk_bclk_ws", - "i2s1_in_data", - "i2s1_out_data"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; }; conf { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index c435984ca7..2dc1bdc74e 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -311,9 +311,9 @@ i2s1_pins: i2s1-pins { mux { function = "i2s"; - groups = "i2s_out_mclk_bclk_ws", - "i2s1_in_data", - "i2s1_out_data"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; }; conf { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 6f333f5cbe..7881a27be0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -103,6 +103,14 @@ regulator-max-microvolt = <3300000>; }; + /* system wide semi-regulated power rail from charger */ + reg_vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -404,6 +412,26 @@ Avdd-supply = <&mt6358_vaud28_reg>; }; +&mt6358regulator { + vsys-ldo1-supply = <®_vsys>; + vsys-ldo2-supply = <®_vsys>; + vsys-ldo3-supply = <®_vsys>; + vsys-vcore-supply = <®_vsys>; + vsys-vdram1-supply = <®_vsys>; + vsys-vgpu-supply = <®_vsys>; + vsys-vmodem-supply = <®_vsys>; + vsys-vpa-supply = <®_vsys>; + vsys-vproc11-supply = <®_vsys>; + vsys-vproc12-supply = <®_vsys>; + vsys-vs1-supply = <®_vsys>; + vsys-vs2-supply = <®_vsys>; + vs1-ldo1-supply = <&mt6358_vs1_reg>; + vs2-ldo1-supply = <&mt6358_vdram1_reg>; + vs2-ldo2-supply = <&mt6358_vs2_reg>; + vs2-ldo3-supply = <&mt6358_vs2_reg>; + vs2-ldo4-supply = <&mt6358_vs2_reg>; +}; + &mt6358_vgpu_reg { regulator-min-microvolt = <625000>; regulator-max-microvolt = <900000>; @@ -831,7 +859,7 @@ pinctrl-names = "default"; pinctrl-0 = <&scp_pins>; - cros_ec { + cros-ec-rpmsg { compatible = "google,cros-ec-rpmsg"; mediatek,rpmsg-name = "cros-ec-rpmsg"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi deleted file mode 100644 index f521f50d44..0000000000 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright 2020 Google LLC - */ - -#include "mt8192-asurada-audio-rt5682.dtsi" -#include "mt8192-asurada-audio-rt1015p.dtsi" - -&sound { - compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682"; - - speaker-codecs { - sound-dai = <&rt1015p>; - }; - - headset-codec { - sound-dai = <&rt5682 0>; - }; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi deleted file mode 100644 index e574378993..0000000000 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/mt8192-pinfunc.h> - -/ { - rt1015p: audio-codec { - compatible = "realtek,rt1015p"; - pinctrl-names = "default"; - pinctrl-0 = <&rt1015p_pins>; - sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>; - #sound-dai-cells = <0>; - }; -}; - -&pio { - rt1015p_pins: rt1015p-default-pins { - pins { - pinmux = <PINMUX_GPIO147__FUNC_GPIO147>; - output-low; - }; - }; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi deleted file mode 100644 index 05e48b870a..0000000000 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - */ - -&i2c1 { - rt5682: audio-codec@1a { - compatible = "realtek,rt5682i"; - reg = <0x1a>; - interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>; - realtek,jd-src = <1>; - realtek,btndet-delay = <16>; - #sound-dai-cells = <1>; - - AVDD-supply = <&mt6359_vio18_ldo_reg>; - DBVDD-supply = <&mt6359_vio18_ldo_reg>; - LDO1-IN-supply = <&mt6359_vio18_ldo_reg>; - MICVDD-supply = <&pp3300_g>; - VBAT-supply = <&pp3300_ldo_z>; - }; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts index 6e23428a3e..fd2cb8765a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts @@ -4,7 +4,6 @@ */ /dts-v1/; #include "mt8192-asurada.dtsi" -#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi" / { model = "Google Hayato rev1"; @@ -101,6 +100,24 @@ }; }; +&rt5682 { + compatible = "realtek,rt5682i"; + realtek,btndet-delay = <16>; + VBAT-supply = <&pp3300_ldo_z>; +}; + +&sound { + compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682"; + + speaker-codecs { + sound-dai = <&rt1015p>; + }; + + headset-codec { + sound-dai = <&rt5682 0>; + }; +}; + &touchscreen { compatible = "hid-over-i2c"; post-power-on-delay-ms = <10>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts new file mode 100644 index 0000000000..3127ee5f61 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ +/dts-v1/; +#include "mt8192-asurada.dtsi" + +/ { + model = "Google Hayato rev5"; + compatible = "google,hayato-rev5-sku2", "google,hayato-sku2", + "google,hayato", "mediatek,mt8192"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_FORWARD) + MATRIX_KEY(0x02, 0x02, KEY_REFRESH) + MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN) + MATRIX_KEY(0x03, 0x04, KEY_SCALE) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&rt5682 { + compatible = "realtek,rt5682s"; +}; + +&sound { + compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s"; + + speaker-codecs { + sound-dai = <&rt1015p>; + }; + + headset-codec { + sound-dai = <&rt5682 0>; + }; +}; + +&touchscreen { + compatible = "hid-over-i2c"; + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_u>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts index c6ad10cec9..bc88866ab2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts @@ -4,7 +4,6 @@ */ /dts-v1/; #include "mt8192-asurada.dtsi" -#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi" #include <dt-bindings/leds/common.h> / { @@ -58,6 +57,24 @@ >; }; +&rt5682 { + compatible = "realtek,rt5682i"; + realtek,btndet-delay = <16>; + VBAT-supply = <&pp3300_ldo_z>; +}; + +&sound { + compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682"; + + speaker-codecs { + sound-dai = <&rt1015p>; + }; + + headset-codec { + sound-dai = <&rt5682 0>; + }; +}; + &touchscreen { compatible = "elan,ekth3500"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts new file mode 100644 index 0000000000..0039158c9e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2022 Google LLC + */ +/dts-v1/; +#include "mt8192-asurada.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Google Spherion (rev4)"; + compatible = "google,spherion-rev4", "google,spherion", + "mediatek,mt8192"; + + pwmleds { + compatible = "pwm-leds"; + + led { + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&cros_ec_pwm { + status = "okay"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&rt5682 { + compatible = "realtek,rt5682s"; +}; + +&sound { + compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s"; + + speaker-codecs { + sound-dai = <&rt1015p>; + }; + + headset-codec { + sound-dai = <&rt5682 0>; + }; +}; + +&touchscreen { + compatible = "elan,ekth3500"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 0e8b341170..f2281250ac 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -210,6 +210,14 @@ }; }; + rt1015p: audio-codec { + compatible = "realtek,rt1015p"; + pinctrl-names = "default"; + pinctrl-0 = <&rt1015p_pins>; + sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + sound: sound { mediatek,platform = <&afe>; pinctrl-names = "aud_clk_mosi_off", @@ -305,6 +313,19 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + + rt5682: audio-codec@1a { + /* Realtek RT5682i or RT5682s, sharing the same configuration */ + reg = <0x1a>; + interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>; + realtek,jd-src = <1>; + #sound-dai-cells = <1>; + + AVDD-supply = <&mt6359_vio18_ldo_reg>; + DBVDD-supply = <&mt6359_vio18_ldo_reg>; + LDO1-IN-supply = <&mt6359_vio18_ldo_reg>; + MICVDD-supply = <&pp3300_g>; + }; }; &i2c2 { @@ -1184,6 +1205,13 @@ }; }; + rt1015p_pins: rt1015p-default-pins { + pins { + pinmux = <PINMUX_GPIO147__FUNC_GPIO147>; + output-low; + }; + }; + scp_pins: scp-pins { pins-vreq-vao { pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>; @@ -1284,7 +1312,7 @@ pinctrl-names = "default"; pinctrl-0 = <&scp_pins>; - cros-ec { + cros-ec-rpmsg { compatible = "google,cros-ec-rpmsg"; mediatek,rpmsg-name = "cros-ec-rpmsg"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 3f508e5c18..5a7cab489f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -47,6 +47,19 @@ reg = <0 0x40000000 0 0x80000000>; }; + pp3300_disp_x: regulator-pp3300-disp-x { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp_x"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <2500>; + enable-active-high; + gpio = <&pio 55 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_fixed_pins>; + vin-supply = <&pp3300_z2>; + }; + /* system wide LDO 3.3V power rail */ pp3300_z5: regulator-pp3300-ldo-z5 { compatible = "regulator-fixed"; @@ -217,6 +230,20 @@ reg = <1>; edp_out: endpoint { data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + port { + panel_in: endpoint { + remote-endpoint = <&edp_out>; + }; }; }; }; @@ -881,6 +908,12 @@ }; }; + panel_fixed_pins: panel-pwr-default-pins { + pins-vreg-en { + pinmux = <PINMUX_GPIO55__FUNC_GPIO55>; + }; + }; + pio_default: pio-default-pins { pins-wifi-enable { pinmux = <PINMUX_GPIO58__FUNC_GPIO58>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index 5d635085fe..69c7f3954a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -102,7 +102,7 @@ }; ð { - phy-mode ="rgmii-id"; + phy-mode = "rgmii-id"; phy-handle = <ðernet_phy0>; snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; snps,reset-delays-us = <0 10000 80000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 413496c920..24581f7410 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/power/mediatek,mt8365-power.h> / { compatible = "mediatek,mt8365"; @@ -298,6 +299,119 @@ reg = <0 0x10005000 0 0x1000>; }; + scpsys: syscon@10006000 { + compatible = "mediatek,mt8365-syscfg", "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt8365-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT8365_POWER_DOMAIN_MM { + reg = <MT8365_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&mmsys CLK_MM_MM_SMI_COMMON>, + <&mmsys CLK_MM_MM_SMI_COMM0>, + <&mmsys CLK_MM_MM_SMI_COMM1>, + <&mmsys CLK_MM_MM_SMI_LARB0>; + clock-names = "mm", "mm-0", "mm-1", + "mm-2", "mm-3"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + mediatek,infracfg-nao = <&infracfg_nao>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@MT8365_POWER_DOMAIN_CAM { + reg = <MT8365_POWER_DOMAIN_CAM>; + clocks = <&camsys CLK_CAM_LARB2>, + <&camsys CLK_CAM_SENIF>, + <&camsys CLK_CAMSV0>, + <&camsys CLK_CAMSV1>, + <&camsys CLK_CAM_FDVT>, + <&camsys CLK_CAM_WPE>; + clock-names = "cam-0", "cam-1", + "cam-2", "cam-3", + "cam-4", "cam-5"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + mediatek,smi = <&smi_common>; + }; + + power-domain@MT8365_POWER_DOMAIN_VDEC { + reg = <MT8365_POWER_DOMAIN_VDEC>; + #power-domain-cells = <0>; + mediatek,smi = <&smi_common>; + }; + + power-domain@MT8365_POWER_DOMAIN_VENC { + reg = <MT8365_POWER_DOMAIN_VENC>; + #power-domain-cells = <0>; + mediatek,smi = <&smi_common>; + }; + + power-domain@MT8365_POWER_DOMAIN_APU { + reg = <MT8365_POWER_DOMAIN_APU>; + clocks = <&infracfg CLK_IFR_APU_AXI>, + <&apu CLK_APU_IPU_CK>, + <&apu CLK_APU_AXI>, + <&apu CLK_APU_JTAG>, + <&apu CLK_APU_IF_CK>, + <&apu CLK_APU_EDMA>, + <&apu CLK_APU_AHB>; + clock-names = "apu", "apu-0", + "apu-1", "apu-2", + "apu-3", "apu-4", + "apu-5"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + mediatek,smi = <&smi_common>; + }; + }; + + power-domain@MT8365_POWER_DOMAIN_CONN { + reg = <MT8365_POWER_DOMAIN_CONN>; + clocks = <&topckgen CLK_TOP_CONN_32K>, + <&topckgen CLK_TOP_CONN_26M>; + clock-names = "conn", "conn1"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + + power-domain@MT8365_POWER_DOMAIN_MFG { + reg = <MT8365_POWER_DOMAIN_MFG>; + clocks = <&topckgen CLK_TOP_MFG_SEL>; + clock-names = "mfg"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + + power-domain@MT8365_POWER_DOMAIN_AUDIO { + reg = <MT8365_POWER_DOMAIN_AUDIO>; + clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&infracfg CLK_IFR_AUDIO>, + <&infracfg CLK_IFR_AUD_26M_BK>; + clock-names = "audio", "audio1", "audio2"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + + power-domain@MT8365_POWER_DOMAIN_DSP { + reg = <MT8365_POWER_DOMAIN_DSP>; + clocks = <&topckgen CLK_TOP_DSP_SEL>, + <&topckgen CLK_TOP_DSP_26M>; + clock-names = "dsp", "dsp1"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt8365-wdt", "mediatek,mt6589-wdt"; reg = <0 0x10007000 0 0x100>; @@ -357,6 +471,14 @@ reg = <0 0x10200a80 0 0x20>; }; + iommu: iommu@10205000 { + compatible = "mediatek,mt8365-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>; + #iommu-cells = <1>; + }; + infracfg_nao: infracfg@1020e000 { compatible = "mediatek,mt8365-infracfg", "syscon"; reg = <0 0x1020e000 0 0x1000>; @@ -603,6 +725,94 @@ #phy-cells = <1>; }; }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8365-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + smi_common: smi@14002000 { + compatible = "mediatek,mt8365-smi-common"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MM_SMI_COMMON>, + <&mmsys CLK_MM_MM_SMI_COMMON>, + <&mmsys CLK_MM_MM_SMI_COMM0>, + <&mmsys CLK_MM_MM_SMI_COMM1>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8365_POWER_DOMAIN_MM>; + }; + + larb0: larb@14003000 { + compatible = "mediatek,mt8365-smi-larb", + "mediatek,mt8186-smi-larb"; + reg = <0 0x14003000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_MM_SMI_LARB0>, + <&mmsys CLK_MM_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8365_POWER_DOMAIN_MM>; + mediatek,larb-id = <0>; + }; + + camsys: syscon@15000000 { + compatible = "mediatek,mt8365-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt8365-smi-larb", + "mediatek,mt8186-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_MM_SMI_IMG>, + <&camsys CLK_CAM_LARB2>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>; + mediatek,larb-id = <2>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt8365-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb3: larb@16010000 { + compatible = "mediatek,mt8365-smi-larb", + "mediatek,mt8186-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_LARB1>, + <&vdecsys CLK_VDEC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8365_POWER_DOMAIN_VDEC>; + mediatek,larb-id = <3>; + }; + + vencsys: syscon@17000000 { + compatible = "mediatek,mt8365-vencsys", "syscon"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@17010000 { + compatible = "mediatek,mt8365-smi-larb", + "mediatek,mt8186-smi-larb"; + reg = <0 0x17010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vencsys CLK_VENC>, <&vencsys CLK_VENC>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8365_POWER_DOMAIN_VENC>; + mediatek,larb-id = <1>; + }; + + apu: syscon@19020000 { + compatible = "mediatek,mt8365-apu", "syscon"; + reg = <0 0x19020000 0 0x1000>; + #clock-cells = <1>; + }; }; timer { diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts new file mode 100644 index 0000000000..00ac59a873 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -0,0 +1,902 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Ben Lok <ben.lok@mediatek.com> + * Macpaul Lin <macpaul.lin@mediatek.com> + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/usb/pd.h> + +/ { + model = "MediaTek Genio 1200 EVK-P1V2-EMMC"; + compatible = "mediatek,mt8395-evk", "mediatek,mt8395", + "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + ethernet0 = ð + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x2 0x00000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + vpu_mem: memory@53000000 { + compatible = "shared-dma-pool"; + reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_mem: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + snd_dma_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0x1100000>; + no-map; + }; + + apu_mem: memory@62000000 { + compatible = "shared-dma-pool"; + reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ + }; + }; + + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + pwms = <&disp_pwm0 0 500000>; + enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + }; + + backlight_lcd1: backlight-lcd1 { + compatible = "pwm-backlight"; + pwms = <&disp_pwm1 0 500000>; + enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + }; + + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can-clk"; + }; + + edp_panel_fixed_3v3: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "edp_panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_3v3_en_pins>; + }; + + edp_panel_fixed_12v: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "edp_backlight_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + gpio = <&pio 96 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_12v_en_pins>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + + button-volume-up { + wakeup-source; + debounce-interval = <100>; + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + wifi_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "wifi_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&disp_pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_default_pins>; + status = "okay"; +}; + +&dmic_codec { + wakeup-delay-ms = <200>; +}; + +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ð_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + mediatek,mac-wol; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + eth_phy0: eth-phy0@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <132 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&mt6360_ldo1>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <128 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + pinctrl-0 = <&mt6360_pins>; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-name = "emi_vdd2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-name = "emi_vddq"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-name = "tp1_p3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + + mt6360_ldo2: ldo2 { + regulator-name = "panel1_p1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo3: ldo3 { + regulator-name = "vmc_pmu"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo5: ldo5 { + regulator-name = "vmch_pmu"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + /* This is a measure point, which name is mt6360_ldo1 on schematic */ + mt6360_ldo6: ldo6 { + regulator-name = "mt6360_ldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo7: ldo7 { + regulator-name = "emi_vmddr_en"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + }; + }; +}; + +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x14c11>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-mmc; + no-sdio; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; + non-removable; +}; + +&mt6359_vaud18_ldo_reg { + regulator-always-on; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +/* For USB Hub */ +&mt6359_vcamio_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359codec { + mediatek,mic-type-0 = <1>; /* ACC */ + mediatek,mic-type-1 = <3>; /* DCC */ + mediatek,mic-type-2 = <1>; /* ACC */ +}; + +&pcie0 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&pcie0_default_pins>; + pinctrl-1 = <&pcie0_idle_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_pins>; + status = "disabled"; +}; + +&pciephy { + status = "okay"; +}; + +&pio { + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>, + <PINMUX_GPIO62__FUNC_DMIC1_DAT>, + <PINMUX_GPIO65__FUNC_PCM_DO>, + <PINMUX_GPIO66__FUNC_PCM_CLK>, + <PINMUX_GPIO67__FUNC_PCM_DI>, + <PINMUX_GPIO68__FUNC_PCM_SYNC>, + <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>, + <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>, + <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>, + <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>; + }; + }; + + disp_pwm1_default_pins: disp-pwm1-default-pins { + pins1 { + pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>; + }; + }; + + edp_panel_12v_en_pins: edp-panel-12v-en-pins { + pins1 { + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>; + output-high; + }; + }; + + edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { + pins1 { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + output-high; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO86__FUNC_GBE_RXC>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO86__FUNC_GPIO86>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO88__FUNC_GPIO88>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + }; + + gpio_key_pins: gpio-keys-pins { + pins { + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength = <MTK_DRIVE_6mA>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mt6360_pins: mt6360-pins { + pins { + pinmux = <PINMUX_GPIO17__FUNC_GPIO17>, + <PINMUX_GPIO128__FUNC_GPIO128>; + input-enable; + bias-pull-up; + }; + }; + + pcie0_default_pins: pcie0-default-pins { + pins { + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, + <PINMUX_GPIO20__FUNC_PERSTN>, + <PINMUX_GPIO21__FUNC_CLKREQN>; + bias-pull-up; + }; + }; + + pcie0_idle_pins: pcie0-idle-pins { + pins { + pinmux = <PINMUX_GPIO20__FUNC_GPIO20>; + bias-disable; + output-low; + }; + }; + + pcie1_default_pins: pcie1-default-pins { + pins { + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, + <PINMUX_GPIO23__FUNC_CLKREQN_1>, + <PINMUX_GPIO24__FUNC_WAKEN_1>; + bias-pull-up; + }; + }; + + pwm0_default_pins: pwm0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>; + }; + }; + + spi1_pins: spi1-pins { + pins { + pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>, + <PINMUX_GPIO137__FUNC_SPIM1_CLK>, + <PINMUX_GPIO138__FUNC_SPIM1_MO>, + <PINMUX_GPIO139__FUNC_SPIM1_MI>; + bias-disable; + }; + }; + + spi2_pins: spi-pins { + pins { + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, + <PINMUX_GPIO142__FUNC_SPIM2_MO>, + <PINMUX_GPIO143__FUNC_SPIM2_MI>; + bias-disable; + }; + }; + + touch_pins: touch-pins { + pins-irq { + pinmux = <PINMUX_GPIO132__FUNC_GPIO132>; + input-enable; + bias-disable; + }; + + pins-reset { + pinmux = <PINMUX_GPIO133__FUNC_GPIO133>; + output-high; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO100__FUNC_URTS1>, + <PINMUX_GPIO101__FUNC_UCTS1>, + <PINMUX_GPIO102__FUNC_UTXD1>, + <PINMUX_GPIO103__FUNC_URXD1>; + }; + }; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem>; + status = "okay"; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>; + + can0: can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + clocks = <&can_clk>; + spi-max-frequency = <20000000>; + interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + }; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315_6: pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315_7: pmic@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vgpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufsphy { + status = "disabled"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 8b78be8f4f..7e24a212c7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -93,6 +93,8 @@ resets = <&tegra_car 28>; reset-names = "host1x"; + iommus = <&mc TEGRA_SWGROUP_HC>; + #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 53805555dd..9ebb736925 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -31,6 +31,33 @@ }; host1x@50000000 { + dsia: dsi@54300000 { + avdd-dsi-csi-supply = <&vdd_dsi_csi>; + status = "okay"; + + link2: panel@0 { + compatible = "jdi,lpm102a188a"; + reg = <0>; + }; + }; + + dsib: dsi@54400000 { + avdd-dsi-csi-supply = <&vdd_dsi_csi>; + nvidia,ganged-mode = <&dsia>; + status = "okay"; + + link1: panel@0 { + compatible = "jdi,lpm102a188a"; + reg = <0>; + power-supply = <&pplcd_vdd>; + ddi-supply = <&pp1800_lcdio>; + enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + link2 = <&link2>; + backlight = <&backlight>; + }; + }; + dpaux: dpaux@545c0000 { status = "okay"; }; @@ -1651,6 +1678,37 @@ status = "okay"; }; + backlight: backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + power-supply = <&pplcd_vdd>; + enable-supply = <&pp1800_lcdio>; + bl-name = "lp8557-backlight"; + dev-ctrl = /bits/ 8 <0x01>; + init-brt = /bits/ 8 <0x80>; + + /* Full scale current, 20mA */ + rom-11h { + rom-addr = /bits/ 8 <0x11>; + rom-val = /bits/ 8 <0x05>; + }; + /* Frequency = 4.9kHz, magic undocumented val */ + rom-12h { + rom-addr = /bits/ 8 <0x12>; + rom-val = /bits/ 8 <0x29>; + }; + /* Boost freq = 1MHz, BComp option = 1 */ + rom-13h { + rom-addr = /bits/ 8 <0x13>; + rom-val = /bits/ 8 <0x03>; + }; + /* 4V OV, 6 output LED string enabled */ + rom-14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xbf>; + }; + }; + audio-codec@2d { compatible = "realtek,rt5677"; reg = <0x2d>; @@ -1932,4 +1990,12 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vdd_dsi_csi: regulator-vdd-dsi-csi { + compatible = "regulator-fixed"; + regulator-name = "AVDD_DSI_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&pp1200_avdd>; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi index 62c4fdad0b..553fa4ba1c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi @@ -44,6 +44,39 @@ status = "okay"; }; + i2c@c250000 { + power-sensor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "CVB_ATX_12V"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@1 { + reg = <0x1>; + label = "CVB_ATX_3V3"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@2 { + reg = <0x2>; + label = "CVB_ATX_5V"; + shunt-resistor-micro-ohms = <2000>; + }; + }; + + power-sensor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + }; + rtc@c2a0000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi index 5e7797df50..db6ef71167 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi @@ -1987,5 +1987,58 @@ status = "okay"; }; }; + + i2c@c240000 { + status = "okay"; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_GPU_SOC"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@1 { + reg = <0x1>; + label = "VDD_CPU_CV"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@2 { + reg = <0x2>; + label = "VIN_SYS_5V0"; + shunt-resistor-micro-ohms = <2000>; + ti,summation-disable; + }; + }; + + power-sensor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + status = "disabled"; + }; + + input@1 { + reg = <0x1>; + label = "VDDQ_VDD2_1V8AO"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@2 { + reg = <0x2>; + status = "disabled"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 4413a9b6da..ea13c4a702 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -30,6 +30,7 @@ }; serial@31d0000 { + current-speed = <115200>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi index fe08e131b7..59c14ded5e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -55,6 +55,35 @@ avdd-usb-supply = <&vdd_3v3_ao>; }; + i2c@c240000 { + status = "okay"; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5000>; + }; + + input@1 { + reg = <0x1>; + label = "VDD_CPU_GPU_CV"; + shunt-resistor-micro-ohms = <5000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_SOC"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; + rtc@c2a0000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts index e9460aedd4..61b0e69d3d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -12,15 +12,10 @@ model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit"; aliases { - serial0 = &tcu; serial1 = &uarta; serial2 = &uarte; }; - chosen { - stdout-path = "serial0:115200n8"; - }; - bus@0 { serial@3100000 { compatible = "nvidia,tegra194-hsuart"; @@ -34,10 +29,6 @@ status = "okay"; }; - serial@31d0000 { - status = "okay"; - }; - pwm@32a0000 { assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; @@ -94,10 +85,6 @@ enable-active-high; }; - serial { - status = "okay"; - }; - thermal-zones { tj-thermal { cooling-maps { diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi index 39110c1232..5d0298b6c3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi @@ -29,6 +29,7 @@ }; serial@31d0000 { + current-speed = <115200>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index ac69eacf8a..3f16595d09 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -694,6 +694,8 @@ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_UARTE>; resets = <&bpmp TEGRA234_RESET_UARTE>; + dmas = <&gpcdma 20>, <&gpcdma 20>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -705,8 +707,8 @@ #address-cells = <1>; #size-cells = <0>; clock-frequency = <400000>; - clocks = <&bpmp TEGRA234_CLK_I2C1 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C1>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; assigned-clocks = <&bpmp TEGRA234_CLK_I2C1>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; @@ -724,8 +726,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <400000>; - clocks = <&bpmp TEGRA234_CLK_I2C3 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C3>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; assigned-clocks = <&bpmp TEGRA234_CLK_I2C3>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; @@ -743,8 +745,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; - clocks = <&bpmp TEGRA234_CLK_I2C4 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C4>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; assigned-clocks = <&bpmp TEGRA234_CLK_I2C4>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; @@ -762,8 +764,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; - clocks = <&bpmp TEGRA234_CLK_I2C6 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C6>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; assigned-clocks = <&bpmp TEGRA234_CLK_I2C6>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; @@ -781,8 +783,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; - clocks = <&bpmp TEGRA234_CLK_I2C7 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C7>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; assigned-clocks = <&bpmp TEGRA234_CLK_I2C7>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; @@ -807,8 +809,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; - clocks = <&bpmp TEGRA234_CLK_I2C9 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C9>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; assigned-clocks = <&bpmp TEGRA234_CLK_I2C9>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; @@ -819,7 +821,7 @@ }; spi@3210000 { - compatible = "nvidia,tegra210-spi"; + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x03210000 0x0 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -838,7 +840,7 @@ }; spi@3230000 { - compatible = "nvidia,tegra210-spi"; + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x03230000 0x0 0x1000>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1751,8 +1753,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <100000>; - clocks = <&bpmp TEGRA234_CLK_I2C2 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C2>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; assigned-clocks = <&bpmp TEGRA234_CLK_I2C2>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; @@ -1770,8 +1772,8 @@ #size-cells = <0>; status = "disabled"; clock-frequency = <400000>; - clocks = <&bpmp TEGRA234_CLK_I2C8 - &bpmp TEGRA234_CLK_PLLP_OUT0>; + clocks = <&bpmp TEGRA234_CLK_I2C8>, + <&bpmp TEGRA234_CLK_PLLP_OUT0>; clock-names = "div-clk", "parent"; assigned-clocks = <&bpmp TEGRA234_CLK_I2C8>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; @@ -1782,7 +1784,7 @@ }; spi@c260000 { - compatible = "nvidia,tegra210-spi"; + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x0c260000 0x0 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2cca20563a..d6cb840b70 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb + +apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb @@ -41,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb @@ -81,6 +86,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb @@ -112,11 +118,16 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-kb.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r10.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r10.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb @@ -196,6 +207,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso new file mode 100644 index 0000000000..a82c26b7ea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +/plugin/; + +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index dabe9f42a6..9ffad7d1f2 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -233,6 +233,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &lpass { status = "okay"; }; @@ -241,6 +245,10 @@ status = "okay"; }; +&mba_mem { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -256,10 +264,13 @@ firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; }; +&mpss_mem { + status = "okay"; + reg = <0x0 0x86800000 0x0 0x2b00000>; +}; + &pm8916_codec { status = "okay"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; @@ -367,6 +378,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; firmware-name = "qcom/apq8016/wcnss.mbn"; @@ -380,6 +399,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts index 027d1da7e8..4f82bb6686 100644 --- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -131,6 +131,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &lpass { status = "okay"; }; @@ -391,3 +395,7 @@ &wcnss_iris { compatible = "qcom,wcn3680"; }; + +&wcnss_mem { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 3067a4091a..e8148b3d6c 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -1089,7 +1089,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; }; &ufshc { @@ -1098,6 +1097,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 9f13d2dcdf..38ffdc3cbd 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -57,6 +57,7 @@ firmware { scm { compatible = "qcom,scm-ipq5018", "qcom,scm"; + qcom,sdi-enabled; }; }; @@ -181,6 +182,13 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5018", "qcom,kpss-wdt"; + reg = <0x0b017000 0x40>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts index f96b0c8c90..c224ffc65b 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts @@ -12,6 +12,15 @@ / { model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; + + regulator_fixed_5p0: regulator-s0500 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_5p0"; + }; }; &blsp1_spi0 { @@ -79,3 +88,17 @@ bias-pull-up; }; }; + +&usb { + status = "okay"; +}; + +&usb_dwc { + dr_mode = "host"; +}; + +&usbphy0 { + vdd-supply = <®ulator_fixed_5p0>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index e40c55adff..d3fef2f80a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -145,6 +145,19 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + usbphy0: phy@7b000 { + compatible = "qcom,ipq5332-usb-hsphy"; + reg = <0x0007b000 0x12c>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x721>; @@ -290,6 +303,48 @@ status = "disabled"; }; + usb: usb@8af8800 { + compatible = "qcom,ipq5332-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SNOC_USB_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB_BCR>; + + qcom,select-utmi-as-pipe-clk; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index fc907afe51..0b1330b521 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -278,33 +278,25 @@ pcie_phy: phy@84000 { compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ + reg = <0x0 0x00084000 0x0 0x1000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; - - pcie_phy0: phy@84200 { - reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ - <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ - <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ - <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_pcie0_pipe_clk_src"; - #clock-cells = <0>; - }; }; mdio: mdio@90000 { @@ -756,7 +748,7 @@ #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy0>; + phys = <&pcie_phy>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 92fd924bbd..2f275c84e5 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -211,59 +211,48 @@ pcie_qmp0: phy@84000 { compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; - reg = <0x00084000 0x1bc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00084000 0x1000>; clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "pcie20_phy0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + resets = <&gcc GCC_PCIE0_PHY_BCR>, - <&gcc GCC_PCIE0PHY_PHY_BCR>; + <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; - - pcie_phy0: phy@84200 { - reg = <0x84200 0x16c>, - <0x84400 0x200>, - <0x84800 0x1f0>, - <0x84c00 0xf4>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie20_phy0_pipe_clk"; - }; }; pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x0008e000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0008e000 0x1000>; clocks = <&gcc GCC_PCIE1_AUX_CLK>, - <&gcc GCC_PCIE1_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "pcie20_phy1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + resets = <&gcc GCC_PCIE1_PHY_BCR>, - <&gcc GCC_PCIE1PHY_PHY_BCR>; + <&gcc GCC_PCIE1PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; - - pcie_phy1: phy@8e200 { - reg = <0x8e200 0x130>, - <0x8e400 0x200>, - <0x8e800 0x1f8>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_PCIE1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie20_phy1_pipe_clk"; - }; }; mdio: mdio@90000 { @@ -807,7 +796,7 @@ #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy1>; + phys = <&pcie_qmp1>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ @@ -869,7 +858,7 @@ #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy0>; + phys = <&pcie_qmp0>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 84723c9b73..57a74eea10 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -155,6 +155,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -163,6 +171,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 47da738661..aa4c1ab1e6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -192,6 +192,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -200,6 +208,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 92f6954817..a8be6ff668 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -160,6 +160,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -168,6 +176,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index 4aeeee24ce..b748d140b5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -150,6 +150,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -158,6 +166,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 484e488a5e..bf7fc89dd1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -328,6 +328,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -336,6 +344,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_irq_default: accel-irq-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 4efc534b1d..aad4a2e5e6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -23,9 +23,14 @@ stdout-path = "serial0"; }; + /* + * For some reason, the signed wcnss firmware is not relocatable. + * It must be loaded at 0x8b600000. All other firmware is relocatable, + * so place wcnss at the fixed address and then all other firmware + * regions will be automatically allocated at a fitting place. + */ reserved-memory { - /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */ - /delete-node/ wcnss@89300000; + /delete-node/ wcnss; wcnss_mem: wcnss@8b600000 { reg = <0x0 0x8b600000 0x0 0x600000>; @@ -260,6 +265,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -268,6 +281,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio116"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index d73294af1a..41cadb906b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -146,6 +146,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -154,6 +162,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 019bf73178..0b29132b74 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -284,6 +288,14 @@ extcon = <&muic>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index e5a569698c..f5a8083695 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -120,6 +120,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 388482a1e3..391befa22b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -71,6 +71,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 6f65fd4b3e..0824ab041d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -83,6 +83,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 54d648972d..c19cf20d74 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -158,6 +158,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -166,6 +174,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 48111c6a2c..75c4854ecd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -19,6 +19,19 @@ pinctrl-names = "default"; }; + reg_lcd_vmipi: regulator-lcd-vmipi { + compatible = "regulator-fixed"; + regulator-name = "lcd_vmipi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&lcd_en_default>; + pinctrl-names = "default"; + }; + reg_motor_vdd: regulator-motor-vdd { compatible = "regulator-fixed"; regulator-name = "motor_vdd"; @@ -55,6 +68,19 @@ enable-active-high; }; + reg_vlcd_5p4v: regulator-vlcd-5p4v { + compatible = "regulator-fixed"; + regulator-name = "vlcd_5p4v"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&buckbooster_en_default>; + pinctrl-names = "default"; + }; + vibrator { compatible = "pwm-vibrator"; @@ -81,10 +107,49 @@ pinctrl-0 = <&tsp_int_rst_default>; pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + pinctrl-names = "default", "sleep"; + + panel@0 { + compatible = "samsung,ltl101at01", "samsung,s6d7aa0"; + reg = <0>; + + power-supply = <®_vlcd_5p4v>; + vmipi-supply = <®_lcd_vmipi>; + reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; }; }; +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + &tlmm { + buckbooster_en_default: buckbooster-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + motor_en_default: motor-en-default-state { pins = "gpio76"; function = "gpio"; @@ -97,6 +162,27 @@ function = "gcc_gp2_clk_a"; }; + lcd_en_default: lcd-en-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdss_default: mdss-default-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_sleep: mdss-sleep-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + tsp_en_default: tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 98ceaad7fc..11359bcc27 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -9,6 +9,19 @@ compatible = "samsung,gt58", "qcom,msm8916"; chassis-type = "tablet"; + reg_5p4v: regulator-5p4v { + compatible = "regulator-fixed"; + regulator-name = "vlcd_5p4v"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&buckbooster_en_default>; + pinctrl-names = "default"; + }; + reg_vdd_tsp: regulator-vdd-tsp { compatible = "regulator-fixed"; regulator-name = "vdd_tsp"; @@ -51,7 +64,58 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + pinctrl-0 = <&mdss_default>; + pinctrl-1 = <&mdss_sleep>; + pinctrl-names = "default", "sleep"; + + panel@0 { + compatible = "samsung,lsl080al03", "samsung,s6d7aa0"; + reg = <0>; + + power-supply = <®_5p4v>; + vmipi-supply = <&pm8916_l5>; + reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + &tlmm { + buckbooster_en_default: buckbooster-en-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdss_default: mdss-default-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_sleep: mdss-sleep-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index cb0e4a7faf..fe59be3505 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -84,6 +84,31 @@ pinctrl-0 = <&muic_int_default>; }; }; + + i2c_sensors: i2c-sensors { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 31 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 32 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&sensors_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + accelerometer: accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + st,drdy-int-pin = <1>; + }; + }; }; &blsp_i2c5 { @@ -138,6 +163,14 @@ extcon = <&muic>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -146,7 +179,18 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -187,6 +231,13 @@ bias-disable; }; + sensors_i2c_default: sensors-i2c-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tsp_int_default: tsp-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 3e1ff5b4d2..58c2f5a70e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -10,6 +10,11 @@ chassis-type = "handset"; }; +&accelerometer { + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; +}; + &blsp_i2c5 { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts index b2fe109723..8b404a9cd6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts @@ -23,6 +23,17 @@ }; }; +&accelerometer { + interrupts-extended = <&tlmm 49 IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&pm8916_l6>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; +}; + &muic { interrupts = <121 IRQ_TYPE_EDGE_FALLING>; }; @@ -40,6 +51,10 @@ }; }; +&accel_int_default { + pins = "gpio49"; +}; + &muic_int_default { pins = "gpio121"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index eaf8773789..68da2a2d30 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -359,6 +359,14 @@ extcon = <&muic>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -367,6 +375,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { fg_alert_default: fg-alert-default-state { pins = "gpio121"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 004a129a2e..c77ed04bb6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -17,18 +17,6 @@ stdout-path = "serial0"; }; - reserved-memory { - mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x5500000>; - no-map; - }; - - gps_mem: gps@8bd00000 { - reg = <0x0 0x8bd00000 0x0 0x200000>; - no-map; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -92,10 +80,19 @@ clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; }; +&mba_mem { + status = "okay"; +}; + &mpss { status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; + status = "okay"; +}; + &pm8916_usbin { status = "okay"; }; @@ -115,6 +112,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -123,6 +128,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { /* pins are board-specific */ button_default: button-default-state { diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 43078b890d..241c3a73c8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -190,6 +190,14 @@ extcon = <&usb_id>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -198,6 +206,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 961ceb83a9..057c1a0b7a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -74,23 +74,43 @@ }; mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x2b00000>; + /* + * The memory region for the mpss firmware is generally + * relocatable and could be allocated dynamically. + * However, many firmware versions tend to fail when + * loaded to some special addresses, so it is hard to + * define reliable alloc-ranges. + * + * alignment = <0x0 0x400000>; + * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + */ + reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ no-map; + status = "disabled"; }; - wcnss_mem: wcnss@89300000 { - reg = <0x0 0x89300000 0x0 0x600000>; + wcnss_mem: wcnss { + size = <0x0 0x600000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - venus_mem: venus@89900000 { - reg = <0x0 0x89900000 0x0 0x600000>; + venus_mem: venus { + size = <0x0 0x500000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - mba_mem: mba@8ea00000 { + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; - reg = <0 0x8ea00000 0 0x100000>; + status = "disabled"; }; }; @@ -1750,7 +1770,7 @@ }; }; - gpu@1c00000 { + gpu: gpu@1c00000 { compatible = "qcom,adreno-306.0", "qcom,adreno"; reg = <0x01c00000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; @@ -1773,6 +1793,7 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&gpu_opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + status = "disabled"; gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1797,7 +1818,7 @@ clock-names = "core", "iface", "bus"; iommus = <&apps_iommu 5>; memory-region = <&venus_mem>; - status = "okay"; + status = "disabled"; video-decoder { compatible = "venus-decoder"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts new file mode 100644 index 0000000000..6802714fda --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/ { + model = "BQ Aquaris M5 (Longcheer L9100)"; + compatible = "longcheer,l9100", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-0 = <&button_backlight_default>; + pinctrl-names = "default"; + }; + }; + + reg_ts_vdd: regulator-vdd-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vdd-ts"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&ts_vdd_default>; + pinctrl-names = "default"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&lcd_bl_en_default>; + pinctrl-names = "default"; + }; + + flash-led-controller { + compatible = "ocs,ocp8110"; + flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default &usb_id_switch_default>; + pinctrl-names = "default"; + }; + +}; + +&blsp_i2c3 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak09911"; + reg = <0x0d>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&mag_reset_default>; + pinctrl-names = "default"; + }; + + light-sensor@23 { + compatible = "liteon,ltr559"; + reg = <0x23>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&light_int_default>; + pinctrl-names = "default"; + }; + + imu@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + vdda-supply = <&pm8916_l6>; + vdd-supply = <®_ts_vdd>; + + pinctrl-0 = <&ts_int_reset_default>; + pinctrl-names = "default"; + + /* Keys listed from right to left */ + linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_mpps { + pwm_out: mpp4-state { + pins = "mpp4"; + function = "digital"; + power-source = <PM8916_MPP_VPH>; + output-low; + qcom,dtest = <1>; + }; +}; + +&pm8916_pwm { + pinctrl-0 = <&pwm_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&tlmm { + button_backlight_default: button-backlight-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio8", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + lcd_bl_en_default: lcd-bl-en-default-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + light_int_default: light-int-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_reset_default: ts-int-reset-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_vdd_default: ts-vdd-default-state { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + usb_id_switch_default: usb-id-switch-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index ba652909d1..fccd8fec8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -352,6 +352,10 @@ compatible = "qcom,wcn3660b"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts index 89b6aebba4..eeb4d578c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -39,6 +39,10 @@ }; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -87,3 +91,7 @@ &wcnss_iris { compatible = "qcom,wcn3660"; }; + +&wcnss_mem { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 3fd64cafe9..f9b6122e65 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -346,23 +346,43 @@ }; mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x5500000>; + /* + * The memory region for the mpss firmware is generally + * relocatable and could be allocated dynamically. + * However, many firmware versions tend to fail when + * loaded to some special addresses, so it is hard to + * define reliable alloc-ranges. + * + * alignment = <0x0 0x400000>; + * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + */ + reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ no-map; + status = "disabled"; }; - wcnss_mem: wcnss@8bd00000 { - reg = <0x0 0x8bd00000 0x0 0x600000>; + wcnss_mem: wcnss { + size = <0x0 0x600000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - venus_mem: venus@8c300000 { - reg = <0x0 0x8c300000 0x0 0x800000>; + venus_mem: venus { + size = <0x0 0x500000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; - mba_mem: mba@8cb00000 { - reg = <0x0 0x8cb00000 0x0 0x100000>; + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; + status = "disabled"; }; }; @@ -1395,7 +1415,7 @@ }; }; - gpu@1c00000 { + gpu: gpu@1c00000 { compatible = "qcom,adreno-405.0", "qcom,adreno"; reg = <0x01c00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -1418,6 +1438,7 @@ power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + status = "disabled"; opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 4c5be22b47..d2bb1ada36 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -338,7 +338,12 @@ }; lpass_mem: lpass@8c200000 { - reg = <0x0 0x8c200000 0x0 0x1800000>; + reg = <0x0 0x8c200000 0x0 0x1000000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8d200000 { + reg = <0x0 0x8d200000 0x0 0x800000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 5fe5de9cee..133f9c2540 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -15,6 +15,7 @@ /delete-node/ &audio_mem; /delete-node/ &mpss_mem; /delete-node/ &peripheral_region; +/delete-node/ &res_hyp_mem; /delete-node/ &rmtfs_mem; / { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 2861bcdf87..cbc84459a5 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -23,6 +23,7 @@ /delete-node/ &mba_mem; /delete-node/ &mpss_mem; /delete-node/ &peripheral_region; +/delete-node/ &res_hyp_mem; /delete-node/ &rmtfs_mem; /delete-node/ &smem_mem; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index c326257152..8295bf1b21 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -281,7 +281,7 @@ no-map; }; - reserved@6c00000 { + res_hyp_mem: reserved@6c00000 { reg = <0 0x06c00000 0 0x400000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index ec5457508f..38035e0db8 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -772,7 +772,6 @@ &ufsphy { vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; status = "okay"; }; @@ -781,6 +780,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 06f8ff6241..5ab583be9e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -115,7 +115,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; /delete-node/ mba@91500000; @@ -417,6 +417,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; @@ -428,7 +429,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c8e0986425..fa8ec92ce4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/interconnect/qcom,msm8996-cbf.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> @@ -443,6 +444,19 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm_out_funnel_in2: endpoint { + remote-endpoint = + <&funnel_in2_in_modem_etm>; + }; + }; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -538,7 +552,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; mpss_mem: mpss@88800000 { @@ -2643,6 +2657,14 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + in-ports { + port { + funnel_in2_in_modem_etm: endpoint { + remote-endpoint = + <&modem_etm_out_funnel_in2>; + }; + }; + }; out-ports { port { diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index b6a214bea7..f1ceaedd95 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -671,6 +671,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -680,7 +681,6 @@ status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index 4319f4da89..7c77612fb9 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -412,6 +412,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -421,7 +422,6 @@ status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 68e634f821..e6a69d942a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -534,6 +534,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -544,7 +545,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 437b30cc8b..0cac06f25a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -667,6 +667,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l26a_1p2>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; @@ -676,7 +677,6 @@ &ufsphy { vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index f180047cac..ebc5ba1b36 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gpucc-msm8998.h> #include <dt-bindings/clock/qcom,mmcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -56,7 +57,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; spss_mem: memory@8ab00000 { @@ -945,7 +946,7 @@ #address-cells = <3>; #size-cells = <2>; num-lanes = <1>; - phys = <&pciephy>; + phys = <&pcie_phy>; phy-names = "pciephy"; status = "disabled"; @@ -975,32 +976,28 @@ pcie_phy: phy@1c06000 { compatible = "qcom,msm8998-qmp-pcie-phy"; - reg = <0x01c06000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0x01c06000 0x1000>; status = "disabled"; - ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_PCIE_CLKREF_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy", "common"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - - pciephy: phy@1c06800 { - reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk_src"; - #clock-cells = <0>; - }; }; ufshc: ufshc@1da4000 { @@ -2034,9 +2031,11 @@ cpu = <&CPU4>; - port { - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; }; }; }; @@ -2051,9 +2050,11 @@ cpu = <&CPU5>; - port { - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; }; }; }; @@ -2068,9 +2069,11 @@ cpu = <&CPU6>; - port { - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; }; }; }; @@ -2085,9 +2088,11 @@ cpu = <&CPU7>; - port { - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 7d4d1f2767..ddbaf7280b 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -53,6 +53,14 @@ bias-pull-up; linux,code = <KEY_POWER>; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 { @@ -88,6 +96,14 @@ status = "disabled"; }; + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index e8540c36bd..df0afe82f2 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -39,16 +39,16 @@ }; &spmi_bus { - pmic@2 { + pmic@PM7250B_SID { compatible = "qcom,pm7250b", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; + reg = <PM7250B_SID SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm7250b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; - interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts = <PM7250B_SID 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; io-channel-names = "thermal"; #thermal-sensor-cells = <0>; @@ -60,7 +60,7 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <PM7250B_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>; channel@0 { reg = <ADC5_REF_GND>; @@ -141,7 +141,7 @@ pm7250b_adc_tm: adc-tm@3500 { compatible = "qcom,spmi-adc-tm5"; reg = <0x3500>; - interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <PM7250B_SID 0x35 0x0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <1>; #address-cells = <1>; #size-cells = <0>; @@ -159,9 +159,9 @@ }; }; - pmic@3 { + pmic@PM7250B_SID1 { compatible = "qcom,pm7250b", "qcom,spmi-pmic"; - reg = <0x3 SPMI_USID>; + reg = <PM7250B_SID1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 2b9123df58..1aee3270ce 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -59,6 +59,46 @@ reg = <0x1100>; }; + pm8150b_typec: typec@1500 { + compatible = "qcom,pm8150b-typec"; + status = "disabled"; + reg = <0x1500>, + <0x1700>; + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + vdd-vbus-supply = <&pm8150b_vbus>; + }; + pm8150b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index b1686e5777..ac08a09c64 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -132,5 +132,15 @@ status = "disabled"; }; + pm8150l_wled: leds@d800 { + compatible = "qcom,pm8150l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index f28e71487d..aa74e21fe0 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -30,6 +30,12 @@ #interrupt-cells = <2>; }; + pm8350c_flash: led-controller@ee00 { + compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + pm8350c_pwm: pwm { compatible = "qcom,pm8350c-pwm"; #pwm-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 223442f909..f4de867877 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -142,9 +142,6 @@ pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi index 41fb664a10..37daaefe34 100644 --- a/arch/arm64/boot/dts/qcom/pmr735d.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi @@ -28,27 +28,6 @@ }; }; }; - - pmr735d-l-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - - thermal-sensors = <&pmr735d_l_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; }; }; @@ -77,28 +56,4 @@ #interrupt-cells = <2>; }; }; - - pmr735d_l: pmic@b { - compatible = "qcom,pmr735d", "qcom,spmi-pmic"; - reg = <0xb SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmr735d_l_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmr735d_l_gpios: gpio@8800 { - compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmr735d_l_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi new file mode 100644 index 0000000000..3b470f6ac4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmr735d-l-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_l_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pmr735d_l: pmic@b { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_l_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_l_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_l_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts new file mode 100644 index 0000000000..2de0b8c26c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com> + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/delete-node/ &rmtfs_mem; + +/ { + model = "Fairphone 5"; + compatible = "fairphone,fp5", "qcom,qcm6490"; + chassis-type = "handset"; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0xe1000000 0x0 (2700 * 1224 * 4)>; + width = <1224>; + height = <2700>; + stride = <(1224 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_down_default>, <&hall_sensor_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + /* Powered by the always-on vreg_l8c */ + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 155 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + cont_splash_mem: cont-splash@e1000000 { + reg = <0x0 0xe1000000 0x0 0x2300000>; + no-map; + }; + + adsp_mem: adsp@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: wpss@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + rmtfs_mem: memory@f8500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8500000 0x0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>; + }; + }; + + ois_avdd0_1p8: regulator-ois-avdd0-1p8 { + compatible = "regulator-fixed"; + regulator-name = "OIS_AVDD0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; + + ois_dvdd_1p1: regulator-ois-dvdd-1p1 { + compatible = "regulator-fixed"; + regulator-name = "OIS_DVDD_1P1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_s8b>; + }; + + afvdd_2p8: regulator-afvdd-2p8 { + compatible = "regulator-fixed"; + regulator-name = "AFVDD_2P8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9c: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* Hall sensor VDD */ + regulator-always-on; + }; + + vreg_l9c: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&dispcc { + /* Disable for now so simple-framebuffer continues working */ + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_EDP_CLKREF_EN>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* PM8008 PMIC @ 8 and 9 */ + /* Pixelworks @ 26 */ + /* FSA4480 USB audio switch @ 42 */ + /* AW86927FCR haptics @ 5a */ +}; + +&i2c2 { + status = "okay"; + + /* AW88261FCR amplifier @ 34 */ + /* AW88261FCR amplifier @ 35 */ +}; + +&i2c4 { + status = "okay"; + + /* PTN36502 USB redriver @ 1a */ +}; + +&i2c9 { + status = "okay"; + + /* ST21NFC NFC @ 28 */ + /* VL53L3 ToF @ 29 */ +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt"; + status = "okay"; +}; + +&pm7325_gpios { + volume_down_default: volume-down-default-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350c_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdc2_clk { + drive-strength = <16>; + bias-disable; +}; + +&sdc2_cmd { + drive-strength = <10>; + bias-pull-up; +}; + +&sdc2_data { + drive-strength = <10>; + bias-pull-up; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9c>; + vqmmc-supply = <&vreg_l6c>; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; + + status = "okay"; +}; + +&spi13 { + status = "okay"; + + /* Goodix touchscreen @ 0 */ +}; + +&tlmm { + /* + * 32-33: SMB1394 (SPMI) + * 56-59: fingerprint reader (SPI) + */ + gpio-reserved-ranges = <32 2>, <56 4>; + + bluetooth_enable_default: bluetooth-enable-default-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + hall_sensor_default: hall-sensor-default-state { + pins = "gpio155"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + sw_ctrl_default: sw-ctrl-default-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + + pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_l19b>; + vddaon-supply = <&vreg_s7b>; + vddbtcxmx-supply = <&vreg_s7b>; + vddrfacmn-supply = <&vreg_s7b>; + vddrfa0p8-supply = <&vreg_s7b>; + vddrfa1p7-supply = <&vreg_s1b>; + vddrfa1p2-supply = <&vreg_s8b>; + vddrfa2p2-supply = <&vreg_s1c>; + vddasd-supply = <&vreg_l11c>; + + max-speed = <3200000>; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l2b>; + + qcom,hs-crossover-voltage-microvolt = <28000>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + qcom,hs-rise-fall-time-bp = <5430>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <2430>; + + qcom,pre-emphasis-amplitude-bp = <20000>; + qcom,pre-emphasis-duration-bp = <20000>; + + qcom,squelch-detector-bp = <(-2090)>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l1b>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 37abb83ea4..fd38a6278f 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "qcm2290.dtsi" #include "pm2250.dtsi" @@ -39,6 +40,38 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-user0 { + label = "green:user0"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { compatible = "regulator-fixed"; regulator-name = "VREG_HDMI_OUT_1P2"; @@ -134,6 +167,16 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcm2290/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm2290/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm2250-regulators"; @@ -383,6 +426,14 @@ status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm2250_l7>; + vdd-1.8-xo-supply = <&pm2250_l13>; + vdd-1.3-rfa-supply = <&pm2250_l10>; + vdd-3.3-ch0-supply = <&pm2250_l22>; + status = "okay"; +}; + &xo_board { clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index e95a004c33..4501c00d12 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -9,6 +9,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/usb/pd.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -609,12 +610,61 @@ /* LS-I2C1 */ &i2c15 { status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_s4a_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_usb_con_ss: endpoint { + remote-endpoint = <&pm8150b_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_phy_con_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@2 { + reg = <2>; + + redriver_usb_con_sbu: endpoint { + remote-endpoint = <&pm8150b_typec_sbu_out>; + }; + }; + }; + }; }; &mdss { status = "okay"; }; +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + &mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l9a_1p2>; @@ -1273,7 +1323,12 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_role_switch_out { + remote-endpoint = <&pm8150b_role_switch_in>; }; &usb_1_hsphy { @@ -1289,6 +1344,11 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; + orientation-switch; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&redriver_phy_con_ss>; }; &usb_2 { @@ -1339,3 +1399,66 @@ drive-strength = <6>; bias-disable; }; + +&pm8150b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + status = "okay"; +}; + +&pm8150b_typec { + status = "okay"; + + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | + PDO_FIXED_DATA_SWAP)>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_role_switch_out>; + }; + }; + + port@1 { + reg = <1>; + pm8150b_typec_mux_in: endpoint { + remote-endpoint = <&redriver_usb_con_ss>; + }; + }; + + port@2 { + reg = <2>; + + pm8150b_typec_sbu_out: endpoint { + remote-endpoint = <&redriver_usb_con_sbu>; + }; + }; + }; + }; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 81a7eeb9cf..9760bb4b46 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -285,6 +285,7 @@ compatible = "ethernet-phy-id0141.0dd4"; reg = <0x8>; device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; reset-assert-us = <11000>; reset-deassert-us = <70000>; @@ -294,6 +295,7 @@ compatible = "ethernet-phy-id0141.0dd4"; reg = <0xa>; device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; reset-assert-us = <11000>; reset-deassert-us = <70000>; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index d4ca92b98c..1274dcda22 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -1525,6 +1525,7 @@ <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; status = "disabled"; }; @@ -1546,6 +1547,13 @@ status = "disabled"; }; + ice: crypto@1d88000 { + compatible = "qcom,sa8775p-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + usb_0_hsphy: phy@88e4000 { compatible = "qcom,sa8775p-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a532cc4aac..7765c8f649 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -10,7 +10,6 @@ /* Deleted nodes from sc7180-trogdor.dtsi */ -/delete-node/ &alc5682; /delete-node/ &pp3300_codec; / { @@ -104,6 +103,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_ts>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index b27dcd2ec8..2ba3bbf3b9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -7,6 +7,8 @@ /* This file must be included after sc7180-trogdor.dtsi */ +#include "sc7180-trogdor-rt5682i-sku.dtsi" + / { /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -116,6 +118,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_touch>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index 36326ef972..d6db7d83ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -11,19 +11,13 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" / { model = "Google Kingoftown"; compatible = "google,kingoftown", "qcom,sc7180"; }; -&alc5682 { - compatible = "realtek,rt5682s"; - /delete-property/ VBAT-supply; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; -}; - &ap_tp_i2c { status = "okay"; }; @@ -84,11 +78,6 @@ ap_ts_pen_1v8: &i2c4 { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; -}; - &wifi { qcom,ath10k-calibration-variant = "GO_KINGOFTOWN"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts new file mode 100644 index 0000000000..eba15535e1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev10+)"; + compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180"; +}; + +/delete-node/ &ap_ts; + +&panel { + compatible = "edp-panel"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index 7f01573b55..e7da0d6e8e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts index 913b5fc3ba..a609a26515 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -11,13 +11,14 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { - model = "Google Lazor Limozeen without Touchscreen (rev9+)"; - compatible = "google,lazor-sku6", "qcom,sc7180"; + model = "Google Lazor Limozeen without Touchscreen (rev9)"; + compatible = "google,lazor-rev9-sku6", "google,lazor-rev9-sku18", "qcom,sc7180"; }; -/delete-node/&ap_ts; +/delete-node/ &ap_ts; &panel { compatible = "edp-panel"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts new file mode 100644 index 0000000000..5cc7c0d8e7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor Limozeen (rev10+)"; + compatible = "google,lazor-sku4", "google,lazor-sku15", "qcom,sc7180"; +}; + +/delete-node/ &ap_ts; + +&ap_ts_pen_1v8 { + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + pinctrl-names = "default"; + + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&tlmm>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts index d42dcd4211..8a24812b9a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -11,6 +11,8 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" + / { model = "Google Lazor Limozeen (rev4 - rev8)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts index 15d77dc5f9..dd377209de 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -11,23 +11,24 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { - model = "Google Lazor Limozeen (rev9+)"; - compatible = "google,lazor-sku4", "qcom,sc7180"; + model = "Google Lazor Limozeen (rev9)"; + compatible = "google,lazor-rev9-sku4", "google,lazor-rev9-sku15", "qcom,sc7180"; }; -/delete-node/&ap_ts; +/delete-node/ &ap_ts; &ap_ts_pen_1v8 { ap_ts: touchscreen@10 { compatible = "elan,ekth3500"; reg = <0x10>; - pinctrl-names = "default"; pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + pinctrl-names = "default"; - interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&tlmm>; vcc33-supply = <&pp3300_ts>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index 80c7108bc5..b60060a384 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Lazor (rev1 - 2)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts new file mode 100644 index 0000000000..45d34718a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor (rev10+) with KB Backlight"; + compatible = "google,lazor-sku2", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts new file mode 100644 index 0000000000..79028d0dd1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor (rev10+) with LTE"; + compatible = "google,lazor-sku0", "google,lazor-sku10", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts new file mode 100644 index 0000000000..045827341e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2023 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" + +/ { + model = "Google Lazor (rev10+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts index 6ff81c1f7c..3459b81c56 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index e58e36e359..ff8f47da10 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Lazor (rev3 - 8) with LTE"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts index 76c83f88cb..dd8f6d9565 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts index 960f7b7ce0..faf5279729 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -10,11 +10,12 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { - model = "Google Lazor (rev9+) with KB Backlight"; - compatible = "google,lazor-sku2", "qcom,sc7180"; + model = "Google Lazor (rev9) with KB Backlight"; + compatible = "google,lazor-rev9-sku2", "qcom,sc7180"; }; &keyboard_backlight { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts index 38027f13b9..d737fd0637 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -11,10 +11,11 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { - model = "Google Lazor (rev9+) with LTE"; - compatible = "google,lazor-sku0", "qcom,sc7180"; + model = "Google Lazor (rev9) with LTE"; + compatible = "google,lazor-rev9-sku0", "google,lazor-rev9-sku10", "qcom,sc7180"; }; &ap_sar_sensor_i2c { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts index 56dd222650..8daad32ff5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts @@ -10,9 +10,10 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-lite.dtsi" / { - model = "Google Lazor (rev9+)"; - compatible = "google,lazor", "qcom,sc7180"; + model = "Google Lazor (rev9)"; + compatible = "google,lazor-rev9", "qcom,sc7180"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 13339b723a..e9f213d277 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -43,6 +43,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts index 767cb7450c..1c3d9f1381 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-pazquel.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (Parade,LTE)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts index 9145b74e90..bf170471b0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts @@ -11,6 +11,7 @@ #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-pazquel.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (TI,LTE)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts index 9a0e6632a7..60ae129b83 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (Parade)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts index 47c5970d8c..31678a98ce 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Pazquel (TI)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index 273e2249f0..89034b6702 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -7,13 +7,7 @@ /* This file must be included after sc7180-trogdor.dtsi */ #include "sc7180-trogdor-pazquel.dtsi" - -&alc5682 { - compatible = "realtek,rt5682s"; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; - /delete-property/ VBAT-supply; -}; +#include "sc7180-trogdor-rt5682s-sku.dtsi" ap_ts_pen_1v8: &i2c4 { clock-frequency = <400000>; @@ -64,11 +58,6 @@ ap_ts_pen_1v8: &i2c4 { >; }; -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; -}; - &wifi { qcom,ath10k-calibration-variant = "GO_PAZQUEL360"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index fd944842dd..0be62331f9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -8,6 +8,7 @@ #include "sc7180-trogdor.dtsi" /* Must come after sc7180-trogdor.dtsi to modify cros_ec */ #include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { @@ -102,6 +103,7 @@ ap_ts_pen_1v8: &i2c4 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 62ab6427dd..5f06842c68 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" /* This board only has 1 USB Type-C port. */ /delete-node/ &usb_c1; @@ -69,6 +70,7 @@ interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 671b3691f1..c9667751a9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -10,6 +10,7 @@ #include "sc7180-trogdor.dtsi" /* Must come after sc7180-trogdor.dtsi to modify cros_ec */ #include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-rt5682i-sku.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi new file mode 100644 index 0000000000..26f2f5de48 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for SKUs with rt5682i + * + * Copyright 2023 Google LLC. + */ + +&hp_i2c { + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + VBAT-supply = <&pp3300_audio>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&sound { + model = "sc7180-rt5682-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi new file mode 100644 index 0000000000..ea036a73f8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for SKUs with rt5682s + * + * Copyright 2023 Google LLC. + */ + +&hp_i2c { + alc5682: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; + realtek,jd-src = <1>; + }; +}; + +&sound { + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts index 6225ab8329..116f79c25a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -10,21 +10,20 @@ /dts-v1/; -#include "sc7180-trogdor-wormdingler-rev1-boe.dts" +#include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" / { model = "Google Wormdingler rev1+ (BOE, rt5682s)"; compatible = "google,wormdingler-sku1025", "qcom,sc7180"; }; -&alc5682 { - compatible = "realtek,rt5682s"; - /delete-property/ VBAT-supply; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; +&mdss_dsi0_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-drive-ldo-level = <450>; }; -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; +&panel { + compatible = "boe,tv110c9m-ll3"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts index 6eeead70d3..72627760e2 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Wormdingler rev1+ BOE panel board"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts index b40b068dad..0bf355e08f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -10,21 +10,14 @@ /dts-v1/; -#include "sc7180-trogdor-wormdingler-rev1-inx.dts" +#include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682s-sku.dtsi" / { model = "Google Wormdingler rev1+ (INX, rt5682s)"; compatible = "google,wormdingler-sku1", "qcom,sc7180"; }; -&alc5682 { - compatible = "realtek,rt5682s"; - /delete-property/ VBAT-supply; - realtek,dmic1-clk-pin = <2>; - realtek,dmic-clk-rate-hz = <2048000>; -}; - -&sound { - compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682s-max98357a-1mic"; +&panel { + compatible = "innolux,hj110iz-01a"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts index dd34a2297e..4b165b826a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "sc7180-trogdor-wormdingler.dtsi" +#include "sc7180-trogdor-rt5682i-sku.dtsi" / { model = "Google Wormdingler rev1+ INX panel board"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 2f6a340ddd..305ad12724 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -123,6 +123,7 @@ interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + panel = <&panel>; post-power-on-delay-ms = <70>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 5a33e16a8b..46aaeba286 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -372,7 +372,6 @@ sound: sound { compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682-max98357a-1mic"; audio-routing = "Headphone Jack", "HPOL", @@ -747,32 +746,6 @@ ap_tp_i2c: &i2c7 { hp_i2c: &i2c9 { status = "okay"; clock-frequency = <400000>; - - alc5682: codec@1a { - compatible = "realtek,rt5682i"; - reg = <0x1a>; - pinctrl-names = "default"; - pinctrl-0 = <&hp_irq>; - - #sound-dai-cells = <1>; - - interrupt-parent = <&tlmm>; - /* - * This will get ignored because the interrupt type - * is set in rt5682.c. - */ - interrupts = <28 IRQ_TYPE_EDGE_BOTH>; - - AVDD-supply = <&pp1800_alc5682>; - DBVDD-supply = <&pp1800_alc5682>; - LDO1-IN-supply = <&pp1800_alc5682>; - MICVDD-supply = <&pp3300_codec>; - VBAT-supply = <&pp3300_audio>; - - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; - realtek,jd-src = <1>; - }; }; &lpasscc { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f7c528ecb2..5b7ffe2081 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -11,15 +11,19 @@ #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7180.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> / { @@ -687,7 +691,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; @@ -2042,6 +2046,11 @@ pins = "gpio57"; function = "lpass_ext"; }; + + ter_mi2s_active: ter-mi2s-active-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66"; + function = "mi2s_2"; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -2795,49 +2804,28 @@ nvmem-cells = <&qusb2p_hstx_trim>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sc7180-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x3c>, - <0 0x088ea000 0 0x18c>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "cfg_ahb"; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x18>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; pmu@90b6300 { @@ -3001,7 +2989,7 @@ iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; }; @@ -3307,8 +3295,9 @@ "ctrl_link_iface", "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -3365,8 +3354,8 @@ <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "dsi0_phy_pll_out_byteclk", @@ -3776,6 +3765,126 @@ status = "disabled"; }; + remoteproc_adsp: remoteproc@62400000 { + compatible = "qcom,sc7180-adsp-pas"; + reg = <0 0x62400000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7180_LCX>, + <&rpmhpd SC7180_LMX>; + power-domain-names = "lcx", "lmx"; + + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1001 0x0>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x0>; + qcom,nsessions = <5>; + }; + }; + }; + }; + lpasscc: clock-controller@62d00000 { compatible = "qcom,sc7180-lpasscorecc"; reg = <0 0x62d00000 0 0x50000>, diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index afae7f46b0..c2cba9d717 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -38,6 +38,10 @@ }; }; +&bluetooth { + vddio-supply = <&vreg_l18b_1p8>; +}; + ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 8e330d2e2e..84de20c88a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -13,11 +13,13 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7280.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> @@ -156,7 +158,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; @@ -170,9 +172,8 @@ reg = <0x0 0x0>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; next-level-cache = <&L2_0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -198,9 +199,8 @@ reg = <0x0 0x100>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -221,9 +221,8 @@ reg = <0x0 0x200>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -244,9 +243,8 @@ reg = <0x0 0x300>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -267,9 +265,8 @@ reg = <0x0 0x400>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -290,9 +287,8 @@ reg = <0x0 0x500>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -313,9 +309,8 @@ reg = <0x0 0x600>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -336,9 +331,8 @@ reg = <0x0 0x700>; clocks = <&cpufreq_hw 2>; enable-method = "psci"; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu7_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -431,9 +425,11 @@ min-residency-us = <5555>; local-timer-stop; }; + }; + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; + compatible = "domain-idle-state"; idle-state-name = "cluster-power-down"; arm,psci-suspend-param = <0x40003444>; entry-latency-us = <3263>; @@ -799,6 +795,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; qspi_opp_table: opp-table-qspi { @@ -856,9 +905,9 @@ reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <&pcie1_lane>, + <0>, <&pcie1_phy>, <0>, <0>, <0>, - <&usb_1_ssphy>; + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", @@ -2109,7 +2158,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_lane>, + <&pcie1_phy>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -2143,7 +2192,7 @@ power-domains = <&gcc GCC_PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; pinctrl-names = "default"; @@ -2159,15 +2208,22 @@ pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2176,21 +2232,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e200 { - reg = <0 0x01c0e200 0 0x170>, - <0 0x01c0e400 0 0x200>, - <0 0x01c0ea00 0 0x1f0>, - <0 0x01c0e600 0 0x170>, - <0 0x01c0e800 0 0x200>, - <0 0x01c0ee00 0 0xf4>; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; ipa: ipa@1e40000 { @@ -2504,7 +2545,6 @@ compatible = "qcom,sc7280-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, <0 0x03550000 0x0 0x10000>; - qcom,adsp-bypass-mode; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; @@ -3343,49 +3383,26 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sc7280-qmp-usb3-dp-phy", - "qcom,sm8250-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sc7280-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #phy-cells = <0>; - #clock-cells = <1>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; usb_2: usb@8cf8800 { @@ -3694,7 +3711,7 @@ iommus = <&apps_smmu 0xe0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; }; @@ -3799,8 +3816,8 @@ <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; clock-names = "bi_tcxo", @@ -4136,8 +4153,9 @@ "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -5285,6 +5303,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index abc66613cc..3ea07d094b 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> @@ -130,7 +131,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; wlan_mem: wlan-region@8bc00000 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index ae008c3b0a..a40ef23a2a 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> @@ -135,7 +136,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; wlan_mem: wlan-region@8bc00000 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index f9e929bfa5..b389d49d3e 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2084,7 +2084,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2123,10 +2123,8 @@ ufs_mem_phy: phy-wrapper@1d87000 { compatible = "qcom,sc8180x-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; clock-names = "ref", @@ -2134,16 +2132,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; ipa_virt: interconnect@1e00000 { @@ -2572,14 +2564,14 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; clock-names = "cfg_noc", "core", "iface", - "mock_utmi", "sleep", + "mock_utmi", "xo"; resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -2623,14 +2615,14 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; clock-names = "cfg_noc", "core", "iface", - "mock_utmi", "sleep", + "mock_utmi", "xo"; resets = <&gcc GCC_USB30_SEC_BCR>; power-domains = <&gcc USB30_SEC_GDSC>; @@ -3273,7 +3265,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@15000000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index ec6003212c..775700f78e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gpucc-sdm660.h> #include <dt-bindings/clock/qcom,mmcc-sdm660.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interconnect/qcom,sdm660.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -453,7 +454,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; smem_region: smem-mem@86000000 { @@ -1028,6 +1029,65 @@ }; }; + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,sdm660-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x40>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GPLL0_OUT_MSSCC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "gpll0_mss", + "snoc_axi", + "mnoc_axi", + "qdss", + "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmpd SDM660_VDDCX>, + <&rpmpd SDM660_VDDMX>; + power-domain-names = "cx", "mx"; + + memory-region = <&mba_region>, <&mpss_region>; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + adreno_gpu: gpu@5000000 { compatible = "qcom,adreno-508.0", "qcom,adreno"; @@ -1416,10 +1476,10 @@ clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>, <&gcc GCC_USB20_MASTER_CLK>, - <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_SLEEP_CLK>; + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; clock-names = "cfg_noc", "core", - "mock_utmi", "sleep"; + "sleep", "mock_utmi"; assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_MASTER_CLK>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index f942c5afea..99dafc6716 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -111,7 +111,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; /* rmtfs upper guard */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 1516113391..76bfa78661 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -114,7 +114,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; + firmware-name = "qcom/sdm845/adsp.mbn"; }; &apps_rsc { @@ -415,7 +415,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; + firmware-name = "qcom/sdm845/cdsp.mbn"; }; &gcc { @@ -533,6 +533,38 @@ firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; }; +&pcie0 { + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + &pm8998_adc { channel@4c { reg = <ADC5_XO_THERM_100K_PU>; @@ -609,6 +641,11 @@ }; }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; @@ -625,6 +662,52 @@ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; }; +&tlmm { + pcie0_default_state: pcie0-default-state { + clkreq-pins { + pins = "gpio36"; + function = "pci_e0"; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + &uart9 { status = "okay"; }; @@ -718,6 +801,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 122c7128de..b523b5fff7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -90,7 +90,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { no-map; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts index d97b7f1e71..6e65909ab5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -15,3 +15,173 @@ &panel { compatible = "sony,td4353-jdi-tama"; }; + +&pmi8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "", + "NC", + "NC", + "", + "WLC_EN_N", + "NC", + "NC", /* GPIO_10 */ + "RSVD(WLC_EN_N)", + "CAM_IO_EN", + "", + "NC"; +}; + +&tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DISP_RESET_N", + "NC", + "CHAT_CAM_PWR_EN", + "CAM2_RSTN", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "CAM_SOF", + "TOF_INT", + "TOF_RESET_N", + "NC", + "NC", + "NC", + "MAIN_CAM_PWR_EN", + "DVDT_ENABLE", + "DVDT_WRT_DET_AND", + "DVDT_WRT_DET_OR", /* GPIO_30 */ + "WLC_INT_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "CC_DIR", + "NC", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_TRXD", + "USB_AUDIO_EN1", + "SW_SERVICE", /* GPIO_50 */ + "US_EURO_SEL", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "USB_PD_EN", + "NFC_DWLD_EN", + "NFC_IRQ", + "CODEC_RST_N", + "CODEC_SPI_MISO", + "CODEC_SPI_MOSI", + "CODEC_SPI_CLK", + "CODEC_SPI_CS_N", + "NC", + "CODEC_SLIMBUS_CLK", /* GPIO_70 */ + "CODEC_SLIMBUS_DATA0", + "CODEC_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "HW_ID_0", + "HW_ID_1", + "TX_GTR_THRES_IN", + "NC", + "NC", + "CAM1_RSTN", /* GPIO_80 */ + "", + "", + "", + "", + "TS_I2C_SDA", + "TS_I2C_SCL", + "NC", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "RFFE6_CLK", + "RFFE6_DATA", + "TS_RESET_N", + "", /* GPIO_100 */ + "GRFC4", + "DEBUG_GPIO0", + "DEBUG_GPIO1", + "RF_LCD_ID_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NC", + "NC", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT", + "RF_ID_EXTENTION", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "TRAY_DET", + "GRFC3", + "NC", + "UIM2_DETECT_EN", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "GRFC2", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "GRFC1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 5d2052a0ff..82e59e4533 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -44,11 +44,179 @@ /delete-property/ touch-reset-gpios; }; +&pmi8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "", + "NC", + "NC", + "", + "WLC_EN_N", + "NC", + "NC", /* GPIO_10 */ + "NC", + "CAM_IO_EN", + "", + "NC"; +}; + &pmi8998_wled { status = "disabled"; }; &tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DISP_RESET_N", + "SAMD_RSTEN_N", + "CHAT_CAM_PWR_EN", + "CAM2_RSTN", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "MASTER_RST_N", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "CAM_SOF", + "TOF_INT", + "TOF_RESET_N", + "NC", + "NC", + "NC", + "MAIN_CAM_PWR_EN", + "DVDT_ENABLE", + "DVDT_WRT_DET_AND", + "DVDT_WRT_DET_OR", /* GPIO_30 */ + "WLC_INT_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "CC_DIR", + "NC", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "DISP_ERR_FG", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_TRXD", + "USB_AUDIO_EN1", + "SW_SERVICE", /* GPIO_50 */ + "US_EURO_SEL", + "SAMD_BOOTL_PIN", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "SDM_SWD_CLK", + "SDM_SWD_DAT", + "SAMD_RST", /* GPIO_60 */ + "USB_PD_EN", + "NFC_DWLD_EN", + "NFC_IRQ", + "CODEC_RST_N", + "CODEC_SPI_MISO", + "CODEC_SPI_MOSI", + "CODEC_SPI_CLK", + "CODEC_SPI_CS_N", + "NC", + "CODEC_SLIMBUS_CLK", /* GPIO_70 */ + "CODEC_SLIMBUS_DATA0", + "CODEC_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "HW_ID_0", + "HW_ID_1", + "TX_GTR_THRES_IN", + "MODE_SEL2", + "NC", + "CAM1_RSTN", /* GPIO_80 */ + "", + "", + "", + "", + "TS_I2C_SDA", + "TS_I2C_SCL", + "NC", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "RFFE6_CLK", + "RFFE6_DATA", + "TS_RESET_N", + "", /* GPIO_100 */ + "GRFC4", + "DEBUG_GPIO0", + "DEBUG_GPIO1", + "RF_LCD_ID_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NC", + "NC", + "NC", + "NFC_ESE_PWR_REQ", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT", + "RF_ID_EXTENTION", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "TRAY_DET", + "GRFC3", + "NC", + "UIM2_DETECT_EN", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "GRFC2", + "TS_VDDIO_EN", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "GRFC1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; + ts_vddio_en: ts-vddio-en-state { pins = "gpio133"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts index cd056f7807..dc15ab1a27 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -17,3 +17,173 @@ height-mm = <112>; width-mm = <56>; }; + +&pmi8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "", + "VIB_LDO_EN", + "NC", + "", + "NC", + "NC", + "NC", /* GPIO_10 */ + "NC", + "CAM_IO_EN", + "", + "NC"; +}; + +&tlmm { + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DISP_RESET_N", + "NC", + "CHAT_CAM_PWR_EN", + "CAM2_RSTN", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "CAM_SOF", + "TOF_INT", + "TOF_RESET_N", + "NC", + "NC", + "NC", + "MAIN_CAM_PWR_EN", + "DVDT_ENABLE", + "DVDT_WRT_DET_AND", + "DVDT_WRT_DET_OR", /* GPIO_30 */ + "NC", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "CC_DIR", + "NC", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_TRXD", + "USB_AUDIO_EN1", + "SW_SERVICE", /* GPIO_50 */ + "US_EURO_SEL", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "USB_PD_EN", + "NFC_DWLD_EN", + "NFC_IRQ", + "CODEC_RST_N", + "CODEC_SPI_MISO", + "CODEC_SPI_MOSI", + "CODEC_SPI_CLK", + "CODEC_SPI_CS_N", + "NC", + "CODEC_SLIMBUS_CLK", /* GPIO_70 */ + "CODEC_SLIMBUS_DATA0", + "CODEC_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "HW_ID_0", + "HW_ID_1", + "TX_GTR_THRES_IN", + "NC", + "NC", + "CAM1_RSTN", /* GPIO_80 */ + "", + "", + "", + "", + "TS_I2C_SDA", + "TS_I2C_SCL", + "NC", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "RFFE6_CLK", + "RFFE6_DATA", + "TS_RESET_N", + "", /* GPIO_100 */ + "GRFC4", + "DEBUG_GPIO0", + "DEBUG_GPIO1", + "RF_LCD_ID_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NC", + "NC", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT", + "RF_ID_EXTENTION", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "TRAY_DET", + "GRFC3", + "NC", + "UIM2_DETECT_EN", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "GRFC2", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "GRFC1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 7ee61b2045..b02a1dc5fe 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -67,6 +67,36 @@ }; }; + cam_vana_front_vreg: cam-vana-front-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_front_vreg"; + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vana_rear_vreg: cam-vana-rear-regulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vana_rear_vreg"; + gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vio_vreg: cam-vio-reagulator { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + gpio = <&pmi8998_gpios 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam_io_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -524,7 +554,41 @@ status = "okay"; }; +&pm8005_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "", + ""; +}; + &pm8998_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "FOCUS_N", + "", + "NC", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "NC", + "FLASH_THERM", + "NC", /* GPIO_10 */ + "LCD_ID", + "RF_ID", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "", /* GPIO_20 */ + "NFC_CLK_REQ", + "", + "", + "", + "", + ""; + focus_n: focus-n-state { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; @@ -558,6 +622,17 @@ }; }; +&pmi8998_gpios { + cam_io_en: cam-io-en-state { + pins = "gpio12"; + function = "normal"; + qcom,drive-strength = <3>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + &pmi8998_wled { default-brightness = <800>; qcom,switching-freq = <800>; @@ -626,6 +701,14 @@ bias-pull-down; }; + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + sde_te_active_sleep: sde-te-active-sleep-state { pins = "gpio10"; function = "mdp_vsync"; @@ -633,6 +716,14 @@ bias-pull-down; }; + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + ts_default: ts-default-state { reset-pins { pins = "gpio99"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 9d6faeb656..93b1582e80 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -111,7 +111,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 6db12abaa8..e386b504e9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -108,7 +108,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 63f6515692..9e594d21ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -18,6 +18,7 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> @@ -813,7 +814,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; qseecom_mem: qseecom@8ab00000 { @@ -1197,8 +1198,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <&pcie0_lane>, - <&pcie1_lane>; + <&pcie0_phy>, + <&pcie1_phy>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", @@ -2370,7 +2371,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; status = "disabled"; @@ -2378,15 +2379,22 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sdm845-qmp-pcie-phy"; - reg = <0 0x01c06000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -2395,19 +2403,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x128>, - <0 0x01c06400 0 0x1fc>, - <0 0x01c06800 0 0x218>, - <0 0x01c06600 0 0x70>; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -2480,7 +2475,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; status = "disabled"; @@ -2488,15 +2483,22 @@ pcie1_phy: phy@1c0a000 { compatible = "qcom,sdm845-qhp-pcie-phy"; - reg = <0 0x01c0a000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0a000 0 0x2000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2505,18 +2507,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c06200 { - reg = <0 0x01c0a800 0 0x800>, - <0 0x01c0a800 0 0x800>, - <0 0x01c0b800 0 0x400>; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; mem_noc: interconnect@1380000 { @@ -3555,11 +3545,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; + port { etf_in: endpoint { remote-endpoint = <&merge_funnel_out>; @@ -3984,49 +3971,28 @@ nvmem-cells = <&qusb2s_hstx_trim>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sdm845-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>, - <0 0x088ea000 0 0x40>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "cfg_ahb"; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x128>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x128>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <1>; }; usb_2_qmpphy: phy@88eb000 { @@ -4106,7 +4072,7 @@ iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -4574,8 +4540,9 @@ "ctrl_link_iface", "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; - phys = <&dp_phy>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; operating-points-v2 = <&dp_opp_table>; @@ -4913,8 +4880,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "gcc_disp_gpll0_div_clk_src", diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index 75951fd439..2c7a12983d 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -225,13 +225,13 @@ vcc-max-microamp = <600000>; vccq2-supply = <&vreg_l11a>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&vreg_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; - vddp-ref-clk-supply = <&vreg_l18a>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 9b70a87906..98eb072fa9 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -219,13 +219,13 @@ vcc-max-microamp = <600000>; vccq2-supply = <&pm6125_l11a>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&pm6125_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&pm6125_l4a>; vdda-pll-supply = <&pm6125_l12a>; - vddp-ref-clk-supply = <&pm6125_l18a>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index c2d15fc6c9..54da053a80 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -344,13 +344,13 @@ vcc-max-microamp = <600000>; vccq2-supply = <&pm6125_l11>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&pm6125_l18>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&pm6125_l4>; vdda-pll-supply = <&pm6125_l12>; - vddp-ref-clk-supply = <&pm6125_l18>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index fb4cba0043..08046f866f 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -179,6 +179,43 @@ /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm6125_l18>; + status = "okay"; + + panel@0 { + compatible = "samsung,sofef01-m-ams597ut01"; + reg = <0>; + + reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>; + + vddio-supply = <&pm6125_l12>; + + pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + &pm6125_adc { pinctrl-names = "default"; pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; @@ -474,6 +511,28 @@ drive-strength = <2>; bias-disable; }; + + mdss_te_active_sleep: mdss-te-active-sleep-state { + pins = "gpio89"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_dsi_active: mdss-dsi-active-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss-dsi-sleep-state { + pins = "gpio90"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index 272bc85f17..a49d3ebb19 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -400,15 +400,13 @@ vccq2-supply = <&vreg_l11a>; vcc-max-microamp = <600000>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&vreg_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l10a>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14200>; - vddp-ref-clk-supply = <&vreg_l18a>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 07081088ba..1dd3a4056e 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org> */ +#include <dt-bindings/clock/qcom,dispcc-sm6125.h> #include <dt-bindings/clock/qcom,gcc-sm6125.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -22,7 +23,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; - clock-output-names = "xo_board"; }; sleep_clk: sleep-clk { @@ -198,6 +198,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -683,6 +685,24 @@ status = "disabled"; }; + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; @@ -699,7 +719,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x160 0x0>; @@ -726,7 +746,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x180 0x0>; @@ -1192,22 +1212,221 @@ reg = <0x04690000 0x10000>; }; - spmi_bus: spmi@1c40000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; + mdss: display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; - #interrupt-cells = <4>; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_nom>; + power-domains = <&rpmpd SM6125_VDDMX>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,sm6125-dispcc"; + reg = <0x05f00000 0x20000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <0>, + <0>, + <0>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "cfg_ahb_clk", + "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; }; apps_smmu: iommu@c600000 { diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi new file mode 100644 index 0000000000..e55cd83c19 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm7125.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &rmtfs_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM7125 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8400000>; + no-map; + }; + + venus_mem: memory@8ee00000 { + reg = <0x0 0x8ee00000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@8f300000 { + reg = <0x0 0x8f300000 0x0 0x1e00000>; + no-map; + }; + + adsp_mem: memory@91100000 { + reg = <0x0 0x91100000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: memory@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + + ipa_fw_mem: memory@93b00000 { + reg = <0x0 0x93b00000 0x0 0x10000>; + no-map; + }; + + gpu_mem: memory@93b15000 { + reg = <0x0 0x93b15000 0x0 0x2000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + no-map; + }; + + pstore_mem: ramoops@9d800000 { + compatible = "ramoops"; + reg = <0x0 0x9d800000 0x0 0x400000>; + record-size = <0x80000>; + pmsg-size = <0x200000>; + console-size = <0x100000>; + }; + + rmtfs_mem: memory@fa601000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xfa601000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a_0p88: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p664: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p1: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_3p0: ldo18 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p23: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_3p0: ldo6 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6150_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm6150_rtc { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_3p0>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <34 4>, <59 4>; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p88>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; + vdda-pll-supply = <&vreg_l11a_1p8>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p88>; + vdda-pll-supply = <&vreg_l3c_1p23>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file mode 100644 index 0000000000..e010d19575 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-xiaomi-common.dtsi" + +/ { + model = "Xiaomi Redmi Note 9 Pro (Global)"; + compatible = "xiaomi,joyeuse", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x50022 1>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi new file mode 100644 index 0000000000..12dd72859a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include "sc7180.dtsi" + +/* SM7125 uses Kryo 465 instead of Kryo 468 */ +&CPU0 { compatible = "qcom,kryo465"; }; +&CPU1 { compatible = "qcom,kryo465"; }; +&CPU2 { compatible = "qcom,kryo465"; }; +&CPU3 { compatible = "qcom,kryo465"; }; +&CPU4 { compatible = "qcom,kryo465"; }; +&CPU5 { compatible = "qcom,kryo465"; }; +&CPU6 { compatible = "qcom,kryo465"; }; +&CPU7 { compatible = "qcom,kryo465"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 18171c5d8a..ade6198055 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -5,9 +5,14 @@ /dts-v1/; +/* PM7250B is configured to use SID2/3 */ +#define PM7250B_SID 2 +#define PM7250B_SID1 3 + /* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */ #define PMK8350_SID 6 +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/input.h> @@ -75,7 +80,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; @@ -386,36 +391,10 @@ }; &i2c10 { - clock-frequency = <400000>; - status = "okay"; - /* PM8008 PMIC @ 8 and 9 */ /* PX8618 @ 26 */ /* SMB1395 PMIC @ 34 */ - - haptics@5a { - compatible = "awinic,aw8695"; - reg = <0x5a>; - interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; - - awinic,f0-preset = <2350>; - awinic,f0-coefficient = <260>; - awinic,f0-calibration-percent = <7>; - awinic,drive-level = <125>; - - awinic,f0-detection-play-time = <5>; - awinic,f0-detection-wait-time = <3>; - awinic,f0-detection-repeat = <2>; - awinic,f0-detection-trace = <15>; - - awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; - awinic,tset = /bits/ 8 <0x12>; - awinic,r-spare = /bits/ 8 <0x68>; - - awinic,bemf-upper-threshold = <4104>; - awinic,bemf-lower-threshold = <1016>; - }; + /* awinic,aw8695 @ 5a */ }; &ipa { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index f7e35e2200..3221478663 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -5,7 +5,9 @@ */ #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -720,7 +722,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; camera_mem: memory@8b700000 { @@ -1873,7 +1875,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; @@ -1887,18 +1889,22 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", - "refgen"; + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -1907,18 +1913,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x170>, /* tx */ - <0 0x01c06400 0 0x200>, /* rx */ - <0 0x01c06800 0 0x1f0>, /* pcs */ - <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -1975,7 +1969,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; @@ -1989,18 +1983,22 @@ pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", - "refgen"; + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2009,20 +2007,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e200 { - reg = <0 0x01c0e200 0 0x170>, /* tx0 */ - <0 0x01c0e400 0 0x200>, /* rx0 */ - <0 0x01c0ea00 0 0x1f0>, /* pcs */ - <0 0x01c0e600 0 0x170>, /* tx1 */ - <0 0x01c0e800 0 0x200>, /* rx1 */ - <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; ufs_mem_hc: ufshc@1d84000 { @@ -2973,11 +2957,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; + port { replicator1_in: endpoint { remote-endpoint = <&replicator_out1>; }; @@ -3442,38 +3423,27 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sm8150-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8150-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x218>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; usb_2_qmpphy: phy@88eb000 { @@ -3614,7 +3584,7 @@ iommus = <&apps_smmu 0x140 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -3949,8 +3919,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index ecdc20bc10..e07d0311ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -18,7 +18,12 @@ qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ qcom,board-id = <0x10008 0>; + aliases { + serial0 = &uart12; + }; + chosen { + stdout-path = "serial0:115200n8"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 1a98481d0c..d59a99ca87 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/soc/qcom,apr.h> @@ -371,6 +372,12 @@ }; }; + qup_virt: interconnect-qup-virt { + compatible = "qcom,sm8250-qup-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -1023,6 +1030,13 @@ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1039,6 +1053,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1055,6 +1075,13 @@ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1071,6 +1098,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1087,6 +1120,13 @@ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1103,6 +1143,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1119,6 +1165,13 @@ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1135,6 +1188,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1150,6 +1209,10 @@ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1164,6 +1227,13 @@ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1180,6 +1250,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1195,6 +1271,10 @@ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1209,6 +1289,13 @@ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, <&gpi_dma2 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1225,6 +1312,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1277,6 +1370,13 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1293,6 +1393,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1309,6 +1415,13 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1325,6 +1438,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1341,6 +1460,13 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1357,6 +1483,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1372,6 +1504,10 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1386,6 +1522,13 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1402,6 +1545,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1418,6 +1567,13 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1434,6 +1590,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1450,6 +1612,13 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1466,6 +1635,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1482,6 +1657,13 @@ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1498,6 +1680,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1513,6 +1701,10 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1527,6 +1719,13 @@ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1543,6 +1742,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1592,6 +1797,13 @@ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1608,6 +1820,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1624,6 +1842,13 @@ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1640,6 +1865,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1656,6 +1887,13 @@ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1672,6 +1910,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1688,6 +1932,13 @@ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1704,6 +1955,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1720,6 +1977,13 @@ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1736,6 +2000,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1751,6 +2021,10 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1765,6 +2039,13 @@ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + power-domains = <&rpmhpd SM8250_CX>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1781,6 +2062,12 @@ dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1898,7 +2185,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; @@ -1913,15 +2200,23 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_WIFI_CLKREF_EN>, - <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -1930,20 +2225,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x170>, /* tx */ - <0 0x01c06400 0 0x200>, /* rx */ - <0 0x01c06800 0 0x1f0>, /* pcs */ - <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -2005,7 +2286,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; @@ -2020,15 +2301,23 @@ pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2037,22 +2326,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e200 { - reg = <0 0x01c0e200 0 0x170>, /* tx0 */ - <0 0x01c0e400 0 0x200>, /* rx0 */ - <0 0x01c0ea00 0 0x1f0>, /* pcs */ - <0 0x01c0e600 0 0x170>, /* tx1 */ - <0 0x01c0e800 0 0x200>, /* rx1 */ - <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; pcie2: pci@1c10000 { @@ -2114,7 +2387,7 @@ power-domains = <&gcc PCIE_2_GDSC>; - phys = <&pcie2_lane>; + phys = <&pcie2_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; @@ -2129,15 +2402,23 @@ pcie2_phy: phy@1c16000 { compatible = "qcom,sm8250-qmp-modem-pcie-phy"; - reg = <0 0x01c16000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c16000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_MDM_CLKREF_EN>, - <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_2_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "phy"; @@ -2146,22 +2427,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie2_lane: phy@1c16200 { - reg = <0 0x01c16200 0 0x170>, /* tx0 */ - <0 0x01c16400 0 0x200>, /* rx0 */ - <0 0x01c16a00 0 0x1f0>, /* pcs */ - <0 0x01c16600 0 0x170>, /* tx1 */ - <0 0x01c16800 0 0x200>, /* rx1 */ - <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; - clock-names = "pipe0"; - - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "pcie_2_pipe_clk"; - }; }; ufs_mem_hc: ufshc@1d84000 { @@ -2830,11 +3095,8 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { tpda_out_funnel_qatb: endpoint { remote-endpoint = <&funnel_qatb_in_tpda>; }; @@ -2877,11 +3139,7 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_qatb_in_tpda: endpoint { remote-endpoint = <&tpda_out_funnel_qatb>; }; @@ -3090,11 +3348,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { etf_in_funnel_swao_out: endpoint { remote-endpoint = <&funnel_swao_out_etf>; }; @@ -3178,8 +3433,6 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; port { tpdm_mm_out_tpda9: endpoint { remote-endpoint = <&tpda_9_in_tpdm_mm>; @@ -3445,11 +3698,7 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_apss_merg_in_funnel_apss: endpoint { remote-endpoint = <&funnel_apss_out_funnel_apss_merg>; }; @@ -3580,47 +3829,45 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy@88e9000 { + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8250-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; + reg = <0 0x088e8000 0 0x3000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eaa00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #phy-cells = <0>; - #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_1_qmpphy_out: endpoint {}; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint {}; + }; }; }; @@ -3892,8 +4139,12 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_role_switch_out: endpoint {}; + }; }; }; @@ -4383,6 +4634,14 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -4410,6 +4669,85 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8250-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; @@ -4586,8 +4924,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <&dp_phy 0>, - <&dp_phy 1>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 4013d25a7d..b43d264ed4 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -7,7 +7,12 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" #include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8350 HDK"; @@ -294,6 +299,81 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-2 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1280000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <976000>; + }; + + vreg_s3e_2p20: smps3 { + regulator-name = "vreg_s3e_2p20"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2352000>; + }; + + vreg_l1e_0p9: ldo1 { + regulator-name = "vreg_l1e_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + }; + + vreg_l2e_1p2: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1872000>; + }; + + vreg_l5e_0p8: ldo5 { + regulator-name = "vreg_l5e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6e_0p8: ldo6 { + regulator-name = "vreg_l6e_0p8"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; }; &cdsp { @@ -760,6 +840,7 @@ vcc-max-microamp = <800000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <900000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index c5a6c87456..8bee57f3b2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -325,6 +325,7 @@ vcc-max-microamp = <800000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <900000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a7cf506f24..a72f3c4700 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,gpucc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -503,7 +504,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; hyp_reserved_mem: memory@d0000000 { @@ -2020,7 +2021,7 @@ compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2062,7 +2063,7 @@ compatible = "qcom,sm8350-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3206,7 +3207,7 @@ compatible = "qcom,sm8350-adsp-pas"; reg = <0 0x17300000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3511,7 +3512,7 @@ compatible = "qcom,sm8350-cdsp-pas"; reg = <0 0x98900000 0 0x1400000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index bd5e8181f2..20153d08ed 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -915,14 +915,23 @@ "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", - "VA DMIC0", "MIC BIAS1", - "VA DMIC1", "MIC BIAS1", - "VA DMIC2", "MIC BIAS3", - "TX DMIC0", "MIC BIAS1", - "TX DMIC1", "MIC BIAS2", - "TX DMIC2", "MIC BIAS3", - "TX SWR_ADC1", "ADC2_OUTPUT"; + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX DMIC0", "MIC BIAS3", + "TX DMIC1", "MIC BIAS3", + "TX DMIC2", "MIC BIAS1", + "TX DMIC3", "MIC BIAS1", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; @@ -1073,6 +1082,7 @@ vcc-max-microamp = <1100000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 3747932770..c7d05945aa 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -443,6 +443,7 @@ vcc-max-microamp = <1100000>; vccq-supply = <&vreg_l9b_1p2>; vccq-max-microamp = <1200000>; + vdd-hba-supply = <&vreg_l9b_1p2>; }; &ufs_mem_phy { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 001fb2723f..8b29fcf483 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -80,7 +80,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; ramoops@ffc00000 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 79cc8fbcd8..f82480570d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,sm8450-dispcc.h> #include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/phy/phy-qcom-qmp.h> @@ -540,7 +541,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; xbl_sc_mem2: memory@a6e00000 { @@ -750,8 +751,8 @@ #power-domain-cells = <1>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, - <&pcie0_lane>, - <&pcie1_lane>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, @@ -1738,11 +1739,6 @@ }; }; - rng: rng@10c3000 { - compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee"; - reg = <0 0x010c3000 0 0x1000>; - }; - pcie0: pci@1c00000 { compatible = "qcom,pcie-sm8450-pcie0"; reg = <0 0x01c00000 0 0x3000>, @@ -1780,7 +1776,7 @@ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, - <&pcie0_lane>, + <&pcie0_phy>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, @@ -1811,7 +1807,7 @@ power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; @@ -1825,15 +1821,23 @@ pcie0_phy: phy@1c06000 { compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x200>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x2000>; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_EN>, - <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -1842,19 +1846,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06e00 0 0x200>, /* tx */ - <0 0x01c07000 0 0x200>, /* rx */ - <0 0x01c06200 0 0x200>, /* pcs */ - <0 0x01c06600 0 0x200>; /* pcs_pcie */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -1894,7 +1885,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_lane>, + <&pcie1_phy>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -1923,7 +1914,7 @@ power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; @@ -1935,17 +1926,25 @@ status = "disabled"; }; - pcie1_phy: phy@1c0f000 { + pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; - reg = <0 0x01c0f000 0 0x200>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0e000 0 0x2000>; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_EN>, - <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -1954,21 +1953,6 @@ assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c0e000 { - reg = <0 0x01c0e000 0 0x200>, /* tx */ - <0 0x01c0e200 0 0x300>, /* rx */ - <0 0x01c0f200 0 0x200>, /* pcs */ - <0 0x01c0e800 0 0x200>, /* tx */ - <0 0x01c0ea00 0 0x300>, /* rx */ - <0 0x01c0f400 0 0xc00>; /* pcs_pcie */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; config_noc: interconnect@1500000 { @@ -2176,7 +2160,7 @@ #sound-dai-cells = <1>; }; - swr4: soundwire-controller@31f0000 { + swr4: soundwire@31f0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x031f0000 0 0x2000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -2224,7 +2208,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03210000 0 0x2000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2291,7 +2275,7 @@ #sound-dai-cells = <1>; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03250000 0 0x2000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2318,7 +2302,7 @@ status = "disabled"; }; - swr2: soundwire-controller@33b0000 { + swr2: soundwire@33b0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x033b0000 0 0x2000>; interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index f29cce5186..9a70875028 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -13,7 +13,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 MTP"; @@ -58,6 +59,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -797,8 +799,7 @@ vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 2c09ce8aea..eef811def3 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -14,7 +14,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 QRD"; @@ -23,6 +24,7 @@ aliases { serial0 = &uart7; + serial1 = &uart14; }; wcd938x: audio-codec { @@ -75,6 +77,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -765,6 +768,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; @@ -842,6 +849,21 @@ &tlmm { gpio-reserved-ranges = <32 8>; + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; @@ -883,14 +905,36 @@ status = "okay"; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s4e_0p95>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa0p8-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p9-supply = <&vreg_s6g_1p86>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3a228d4f0c..e15564ed54 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -5,11 +5,13 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-videocc.h> +#include <dt-bindings/clock/qcom,sm8550-camcc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/clock/qcom,sm8550-gpucc.h> #include <dt-bindings/clock/qcom,sm8550-tcsr.h> #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> @@ -580,7 +582,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; mpss_dsm_mem: mpss-dsm-region@d4d00000 { @@ -1064,6 +1066,20 @@ status = "disabled"; }; + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c15: i2c@89c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0089c000 0 0x4000>; @@ -2044,7 +2060,7 @@ #sound-dai-cells = <1>; }; - swr3: soundwire-controller@6ab0000 { + swr3: soundwire@6ab0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ab0000 0 0x10000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -2090,7 +2106,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@6ad0000 { + swr1: soundwire@6ad0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ad0000 0 0x10000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2155,7 +2171,7 @@ #sound-dai-cells = <1>; }; - swr0: soundwire-controller@6b10000 { + swr0: soundwire@6b10000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06b10000 0 0x10000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2182,7 +2198,7 @@ status = "disabled"; }; - swr2: soundwire-controller@6d30000 { + swr2: soundwire@6d30000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06d30000 0 0x10000>; interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, @@ -2430,6 +2446,20 @@ #power-domain-cells = <1>; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8550-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3508,6 +3538,22 @@ bias-disable; }; + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio78", "gpio79"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio76", "gpio77"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_sleep: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 7114cbbd87..8ea68d5827 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -29,21 +29,35 @@ dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb +r8a77951-salvator-x-panel-aa104xd12-dtbs := r8a77951-salvator-x.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb +r8a77951-salvator-xs-panel-aa104xd12-dtbs := r8a77951-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb +r8a77960-salvator-x-panel-aa104xd12-dtbs := r8a77960-salvator-x.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb +r8a77960-salvator-xs-panel-aa104xd12-dtbs := r8a77960-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb +r8a77961-salvator-xs-panel-aa104xd12-dtbs := r8a77961-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb +r8a77965-salvator-x-panel-aa104xd12-dtbs := r8a77965-salvator-x.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb +r8a77965-salvator-xs-panel-aa104xd12-dtbs := r8a77965-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb @@ -55,36 +69,60 @@ dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980a-condor-i.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb +r8a77990-ebisu-panel-aa104xd12-dtbs := r8a77990-ebisu.dtb draak-ebisu-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb +r8a77995-draak-panel-aa104xd12-dtbs := r8a77995-draak.dtb draak-ebisu-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb +dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f4-s4sk.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo +r8a779g0-white-hawk-ard-audio-da7212-dtbs := r8a779g0-white-hawk.dtb r8a779g0-white-hawk-ard-audio-da7212.dtbo +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb +r8a779m1-salvator-xs-panel-aa104xd12-dtbs := r8a779m1-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb +r8a779m3-salvator-xs-panel-aa104xd12-dtbs := r8a779m3-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb +r8a779m5-salvator-xs-panel-aa104xd12-dtbs := r8a779m5-salvator-xs.dtb salvator-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo +r9a07g043u11-smarc-pmod-dtbs := r9a07g043u11-smarc.dtb r9a07g043-smarc-pmod.dtbo +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-pmod.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo +r9a07g044c2-smarc-cru-csi-ov5645-dtbs := r9a07g044c2-smarc.dtb r9a07g044c2-smarc-cru-csi-ov5645.dtbo +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo +r9a07g044l2-smarc-cru-csi-ov5645-dtbs := r9a07g044l2-smarc.dtb r9a07g044l2-smarc-cru-csi-ov5645.dtbo +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtb dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo +r9a07g054l2-smarc-cru-csi-ov5645-dtbs := r9a07g054l2-smarc.dtb r9a07g054l2-smarc-cru-csi-ov5645.dtbo +dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtb + +dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc.dtb dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index 2e9927b977..5a14f116f7 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -651,7 +651,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&versaclock6_bb 4>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + <&cpg CPG_MOD 922>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index bbc29452d1..f1a5778ef1 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Ebisu board + * Device Tree Source for the Ebisu/Ebisu-4D board * * Copyright (C) 2018 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi index 7fc0339a3a..66f3affe04 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi @@ -112,7 +112,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + <&cpg CPG_MOD 922>; rsnd_port: port { rsnd_endpoint: endpoint { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 9065dc2434..95b0a1f6de 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -10,8 +10,6 @@ #include <dt-bindings/clock/r8a774a1-cpg-mssr.h> #include <dt-bindings/power/r8a774a1-sysc.h> -#define CPG_AUDIO_CLK_I R8A774A1_CLK_S0D4 - / { compatible = "renesas,r8a774a1"; #address-cells = <2>; @@ -1713,7 +1711,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774A1_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 75776decd2..786660fcde 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -10,8 +10,6 @@ #include <dt-bindings/clock/r8a774b1-cpg-mssr.h> #include <dt-bindings/power/r8a774b1-sysc.h> -#define CPG_AUDIO_CLK_I R8A774B1_CLK_S0D4 - / { compatible = "renesas,r8a774b1"; #address-cells = <2>; @@ -1597,7 +1595,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774B1_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index ad2e87b039..eed94ffed7 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1350,7 +1350,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774C0_CLK_ZA2>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 2acf4067ab..175e5d296d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -10,8 +10,6 @@ #include <dt-bindings/clock/r8a774e1-cpg-mssr.h> #include <dt-bindings/power/r8a774e1-sysc.h> -#define CPG_AUDIO_CLK_I R8A774E1_CLK_S0D4 - / { compatible = "renesas,r8a774e1"; #address-cells = <2>; @@ -1809,7 +1807,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774E1_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 6d15229d25..a4260d9291 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7795-sysc.h> -#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 - #define SOC_HAS_HDMI1 #define SOC_HAS_SATA #define SOC_HAS_USB2_CH2 @@ -2032,7 +2030,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A7795_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 17062ec506..a631ead171 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a7796-sysc.h> -#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4 - / { compatible = "renesas,r8a7796"; #address-cells = <2>; @@ -1903,7 +1901,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A7796_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index d3f47da1b6..7254912a24 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77961-sysc.h> -#define CPG_AUDIO_CLK_I R8A77961_CLK_S0D4 - / { compatible = "renesas,r8a77961"; #address-cells = <2>; @@ -1783,7 +1781,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A77961_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index c758200384..e57b902706 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -12,8 +12,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77965-sysc.h> -#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4 - #define SOC_HAS_SATA / { @@ -1766,7 +1764,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A77965_CLK_S0D4>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 9da0fd08f8..d5ac34a966 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Ebisu board with R-Car E3 + * Device Tree Source for the Ebisu/Ebisu-4D board with R-Car E3 * * Copyright (C) 2018 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 4c545eff9b..8c2b283423 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1501,7 +1501,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A77990_CLK_ZA2>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index e25024a7b6..8cf6473c63 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1063,7 +1063,7 @@ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, - <&cpg CPG_CORE R8A77995_CLK_ZA2>; + <&cpg CPG_MOD 922>; clock-names = "ssi-all", "ssi.4", "ssi.3", "src.6", "src.5", diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 5cbde8e8fc..477f3114d2 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -53,6 +53,12 @@ reg = <0x4 0x80000000 0x0 0x80000000>; }; + rc21012_pci: clk-rc21012-pci { + compatible = "fixed-clock"; + clock-frequency = <100000000>; + #clock-cells = <0>; + }; + rc21012_ufs: clk-rc21012-ufs { compatible = "fixed-clock"; clock-frequency = <38400000>; @@ -106,6 +112,12 @@ reg = <0x20>; gpio-controller; #gpio-cells = <2>; + + rc21012-gpio2-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-high; + }; }; }; @@ -145,6 +157,18 @@ status = "okay"; }; +&pcie0_clkref { + compatible = "gpio-gate-clock"; + clocks = <&rc21012_pci>; + enable-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + /delete-property/ clock-frequency; +}; + +&pciec0 { + reset-gpio = <&gpio_exp_20 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index ecdd5a523f..7fb4989cce 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -262,6 +262,20 @@ clock-frequency = <0>; }; + pcie0_clkref: pcie0-clkref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + pcie1_clkref: pcie1-clkref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + pmu_a55 { compatible = "arm,cortex-a55-pmu"; interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; @@ -726,6 +740,126 @@ status = "disabled"; }; + pciec0: pcie@e65d0000 { + compatible = "renesas,r8a779f0-pcie", + "renesas,rcar-gen4-pcie"; + reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>, + <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config"; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>; + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>; + snps,enable-cdm-check; + status = "disabled"; + }; + + pciec1: pcie@e65d8000 { + compatible = "renesas,r8a779f0-pcie", + "renesas,rcar-gen4-pcie"; + reg = <0 0xe65d8000 0 0x1000>, <0 0xe65da000 0 0x0800>, + <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>, + <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>, + <0 0xee900000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config"; + interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 625>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00400000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x10000000>; + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>; + snps,enable-cdm-check; + status = "disabled"; + }; + + pciec0_ep: pcie-ep@e65d0000 { + compatible = "renesas,r8a779f0-pcie-ep", + "renesas,rcar-gen4-pcie-ep"; + reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>, + <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space"; + interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + max-functions = /bits/ 8 <2>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@e65d8000 { + compatible = "renesas,r8a779f0-pcie-ep", + "renesas,rcar-gen4-pcie-ep"; + reg = <0 0xe65d8000 0 0x2000>, <0 0xe65da000 0 0x1000>, + <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>, + <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>, + <0 0xee900000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space"; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 625>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + max-functions = /bits/ 8 <2>; + status = "disabled"; + }; + ufs: ufs@e6860000 { compatible = "renesas,r8a779f0-ufs"; reg = <0 0xe6860000 0 0x100>; diff --git a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts new file mode 100644 index 0000000000..abfda5c6ca --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree Source for the R-Car S4 Starter Kit board + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "r8a779f4.dtsi" + +/ { + model = "R-Car S4 Starter Kit board"; + compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0"; + + aliases { + serial0 = &hscif0; + serial1 = &hscif1; + eth0 = &rswitch; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:921600n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + /* The last 512MB is reserved for CR. */ + reg = <0x0 0x48000000 0x0 0x58000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + vcc_sdhi: regulator-vcc-sdhi { + compatible = "regulator-fixed"; + regulator-name = "SDHI Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð_serdes { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c5 { + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "st,24c16", "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&mmc0 { + pinctrl-0 = <&sd_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi>; + cd-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data", "hscif1_ctrl"; + function = "hscif1"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + + i2c4_pins: i2c4 { + groups = "i2c4"; + function = "i2c4"; + }; + + i2c5_pins: i2c5 { + groups = "i2c5"; + function = "i2c5"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; + + sd_pins: sd { + groups = "mmc_data4", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + + tsn0_pins: tsn0 { + groups = "tsn0_mdio_b", "tsn0_link_b"; + function = "tsn0"; + drive-strength = <18>; + power-source = <3300>; + }; + + tsn1_pins: tsn1 { + groups = "tsn1_mdio_b", "tsn1_link_b"; + function = "tsn1"; + drive-strength = <18>; + power-source = <3300>; + }; +}; + +&rswitch { + pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>; + pinctrl-names = "default"; + status = "okay"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&ic99>; + phy-mode = "sgmii"; + phys = <ð_serdes 0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ic99: ethernet-phy@1 { + reg = <1>; + compatible = "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + + port@1 { + reg = <1>; + phy-handle = <&ic102>; + phy-mode = "sgmii"; + phys = <ð_serdes 1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ic102: ethernet-phy@2 { + reg = <2>; + compatible = "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&gpio3>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + + port@2 { + status = "disabled"; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; + +&ufs { + status = "okay"; +}; + +&ufs30_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779f4.dtsi b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi new file mode 100644 index 0000000000..ebed41892d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree Source for the R-Car S4-8 (R8A779F4) SoC + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +#include "r8a779f0.dtsi" + +/ { + compatible = "renesas,r8a779f4", "renesas,r8a779f0"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi new file mode 100644 index 0000000000..6c7b29b69d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G3S SoC + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a08g045-cpg.h> + +/ { + compatible = "renesas,r9a08g045"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + #cooling-cells = <2>; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A08G045_CLK_I>; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-level = <3>; + cache-unified; + cache-size = <0x40000>; + }; + }; + + extal_clk: extal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A08G045_SCIF0_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a08g045-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a08g045-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a08g045-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&pinctrl 0 0 152>; + clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_GPIO_RSTN>, + <&cpg R9A08G045_GPIO_PORT_RESETN>, + <&cpg R9A08G045_GPIO_SPARE_RESETN>; + }; + + sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c00000 0 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A08G045_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A08G045_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A08G045_SDHI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A08G045_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c10000 0 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A08G045_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A08G045_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A08G045_SDHI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A08G045_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi2: mmc@11c20000 { + compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c20000 0 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_SDHI2_IMCLK>, + <&cpg CPG_MOD R9A08G045_SDHI2_CLK_HS>, + <&cpg CPG_MOD R9A08G045_SDHI2_IMCLK2>, + <&cpg CPG_MOD R9A08G045_SDHI2_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A08G045_SDHI2_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + gic: interrupt-controller@12400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x12400000 0 0x40000>, + <0x0 0x12440000 0 0x60000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts new file mode 100644 index 0000000000..6b57e0e02d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G3S SMARC EVK board + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; + +#include "r9a08g045s33.dtsi" +#include "rzg3s-smarc-som.dtsi" +#include "rzg3s-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK version 2 based on r9a08g045s33"; + compatible = "renesas,smarc2-evk", "renesas,rzg3s-smarcm", + "renesas,r9a08g045s33", "renesas,r9a08g045"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi new file mode 100644 index 0000000000..3351f26c7a --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G3S R9A08G045S33 SoC specific part + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; + +#include "r9a08g045.dtsi" + +/ { + compatible = "renesas,r9a08g045s33", "renesas,r9a08g045"; +}; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi index a7594ba3a9..b7a3e6caa3 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi @@ -32,12 +32,6 @@ stdout-path = "serial0:115200n8"; }; - audio_mclock: audio_mclock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - snd_rzg2l: sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -55,7 +49,7 @@ }; codec_dai: simple-audio-card,codec { - clocks = <&audio_mclock>; + clocks = <&versa3 2>; sound-dai = <&wm8978>; }; }; @@ -76,6 +70,12 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; + + x1: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &audio_clk1 { diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 68eab8e26b..37807f1bda 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -110,6 +110,26 @@ #sound-dai-cells = <0>; reg = <0x1a>; }; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x1>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; + }; }; #if PMOD_MTU3 diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index 83fce96a25..859bc8745e 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -126,6 +126,26 @@ #sound-dai-cells = <0>; reg = <0x1a>; }; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x1>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; + }; }; #if PMOD_MTU3 diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi index 8eb411aac8..de590996e1 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi @@ -20,6 +20,30 @@ sound-dai = <&ssi1>; }; +&i2c0 { + clock-frequency = <400000>; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x1>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; + }; +}; + &i2c1 { wm8978: codec@1a { compatible = "wlf,wm8978"; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi new file mode 100644 index 0000000000..a199de8f8b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R9A08G045S33 SMARC Carrier-II's SoM board. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * Signals of SW_CONFIG switches: + * @SW_SD0_DEV_SEL: + * 0 - SD0 is connected to eMMC + * 1 - SD0 is connected to uSD0 card + */ +#define SW_SD0_DEV_SEL 1 + +/ { + compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045"; + + aliases { + mmc0 = &sdhi0; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* First 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + vcc_sdhi0: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(2, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + +#if SW_SD0_DEV_SEL + vccq_sdhi0: regulator1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +#else + reg_1p8v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; +#endif +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +#if SW_SD0_DEV_SEL +/* SD0 slot */ +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_uhs_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <125000000>; + status = "okay"; +}; +#else +/* eMMC */ +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + max-frequency = <125000000>; + status = "okay"; +}; +#endif + +&pinctrl { + sdhi0_pins: sd0 { + data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + cd { + pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ + }; + }; + + sdhi0_uhs_pins: sd0-uhs { + data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + cd { + pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ + }; + }; + + sdhi0_emmc_pins: sd0-emmc { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7", + "SD0_CLK", "SD0_CMD", "SD0_RST#"; + power-source = <1800>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi new file mode 100644 index 0000000000..e7073a09ed --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ SMARC Carrier-II Board. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/ { + aliases { + serial0 = &scif0; + }; +}; + +&pinctrl { + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */ + <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */ + }; +}; + +&scif0 { + pinctrl-names = "default"; + pinctrl-0 = <&scif0_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 4a3d503782..1eb4883b32 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -822,7 +822,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + <&cpg CPG_MOD 922>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi index 672b0a224e..be6d7a0357 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi @@ -21,14 +21,14 @@ / { sound_card: sound { compatible = "audio-graph-scu-card"; - label = "rcar-sound"; + label = "snd-ulcb-mix"; routing = "ak4613 Playback", "DAI0 Playback", "ak4613 Playback", "DAI1 Playback", "DAI0 Capture", "ak4613 Capture"; - dais = <&rsnd_port0 /* (A) CPU0 */ - &rsnd_port1 /* (B) CPU1 */ + dais = <&snd_ulcb1 /* (A) CPU0 */ + &snd_ulcb2 /* (B) CPU1 */ >; }; }; @@ -58,14 +58,18 @@ }; &rcar_sound { - ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { #address-cells = <1>; #size-cells = <0>; + reg = <0>; /* * (A) CPU0 */ - rsnd_port0: port@0 { + snd_ulcb1: port@0 { reg = <0>; rsnd_for_ak4613_1: endpoint { remote-endpoint = <&ak4613_ep1>; @@ -78,7 +82,7 @@ /* * (B) CPU1 */ - rsnd_port1: port@1 { + snd_ulcb2: port@1 { reg = <1>; rsnd_for_ak4613_2: endpoint { remote-endpoint = <&ak4613_ep2>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi index 3be54df645..3f1df6ee17 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi @@ -18,10 +18,10 @@ / { sound_card: sound { compatible = "audio-graph-card"; - label = "rcar-sound"; + label = "snd-ulcb"; - dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ - &rsnd_port1 /* (B) CPU1 -> HDMI */ + dais = <&snd_ulcb1 /* (A) CPU0 <-> ak4613 */ + &snd_ulcb2 /* (B) CPU1 -> HDMI */ >; }; }; @@ -53,10 +53,15 @@ }; &rcar_sound { - ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { #address-cells = <1>; #size-cells = <0>; - rsnd_port0: port@0 { + reg = <0>; + + snd_ulcb1: port@0 { /* * (A) CPU0 <-> ak4613 */ @@ -69,7 +74,7 @@ capture = <&ssi1>, <&src1>, <&dvc1>; }; }; - rsnd_port1: port@1 { + snd_ulcb2: port@1 { /* * (B) CPU1 -> HDMI */ diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi index 75b024e3fe..8966e6a7d2 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi @@ -20,13 +20,12 @@ / { sound_card: sound { compatible = "audio-graph-card2"; - label = "rcar-sound"; + label = "snd-ulcb-mix"; routing = "ak4613 Playback", "DAI0 Playback", "ak4613 Playback", "DAI1 Playback", "DAI0 Capture", "ak4613 Capture"; - /delete-property/ dais; links = <&fe_a /* (A) CPU0 */ &fe_b /* (B) CPU1 */ &be_x /* (X) ak4613 */ @@ -50,14 +49,12 @@ }; ports@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; /* * BE * (X) ak4613 */ - be_x: port@0 { reg = <0>; be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; }; + be_x: port { be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; }; }; }; }; @@ -78,9 +75,13 @@ }; &rcar_sound { - ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { #address-cells = <1>; #size-cells = <0>; + reg = <0>; /* * (A) CPU0 diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi index 5ebec12358..19fa6e1029 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi @@ -20,7 +20,7 @@ compatible = "audio-graph-card2"; /delete-property/ dais; - links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ - &rsnd_port1 /* (B) CPU1 -> HDMI */ + links = <&snd_ulcb1 /* (A) CPU0 <-> ak4613 */ + &snd_ulcb2 /* (B) CPU1 -> HDMI */ >; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi index 9b01354940..8ae6af1af0 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi @@ -19,32 +19,31 @@ * * (A) aplay -D plughw:0,0 xxx.wav (MIX-0) * (B) aplay -D plughw:0,1 xxx.wav (MIX-1) - * (C) aplay -D plughw:0,2 xxx.wav (TDM-0) - * (D) aplay -D plughw:0,3 xxx.wav (TDM-1) - * (E) aplay -D plughw:0,4 xxx.wav (TDM-2) - * (F) aplay -D plughw:0,5 xxx.wav (TDM-3) + * (C) aplay -D plughw:1,0 xxx.wav (TDM-0) + * (D) aplay -D plughw:1,1 xxx.wav (TDM-1) + * (E) aplay -D plughw:1,2 xxx.wav (TDM-2) + * (F) aplay -D plughw:1,3 xxx.wav (TDM-3) * * (A) arecord -D plughw:0,0 xxx.wav - * (G) arecord -D plughw:0,6 xxx.wav + * (G) arecord -D plughw:1,4 xxx.wav */ +/ { + sound_card_kf: expand-sound { + compatible = "audio-graph-scu-card"; + label = "snd-kf-split"; -&sound_card { - routing = "ak4613 Playback", "DAI0 Playback", - "ak4613 Playback", "DAI1 Playback", - "DAI0 Capture", "ak4613 Capture", - "pcm3168a Playback", "DAI2 Playback", - "pcm3168a Playback", "DAI3 Playback", - "pcm3168a Playback", "DAI4 Playback", - "pcm3168a Playback", "DAI5 Playback"; + routing = "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback"; - dais = <&rsnd_port0 /* (A) CPU0 */ - &rsnd_port1 /* (B) CPU1 */ - &rsnd_port2 /* (C) CPU2 */ - &rsnd_port3 /* (D) CPU3 */ - &rsnd_port4 /* (E) CPU4 */ - &rsnd_port5 /* (F) CPU5 */ - &rsnd_port6 /* (G) GPU6 */ - >; + dais = <&snd_kf1 /* (C) CPU2 */ + &snd_kf2 /* (D) CPU3 */ + &snd_kf3 /* (E) CPU4 */ + &snd_kf4 /* (F) CPU5 */ + &snd_kf5 /* (G) GPU6 */ + >; + }; }; &pcm3168a { @@ -103,13 +102,15 @@ }; &rcar_sound { - ports { - /* rsnd_port0-1 are defined in ulcb.dtsi */ + ports@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; /* * (C) CPU2 */ - rsnd_port2: port@2 { + snd_kf1: port@2 { reg = <2>; rsnd_for_pcm3168a_play1: endpoint { remote-endpoint = <&pcm3168a_endpoint_p1>; @@ -121,7 +122,7 @@ /* * (D) CPU3 */ - rsnd_port3: port@3 { + snd_kf2: port@3 { reg = <3>; rsnd_for_pcm3168a_play2: endpoint { remote-endpoint = <&pcm3168a_endpoint_p2>; @@ -133,7 +134,7 @@ /* * (E) CPU4 */ - rsnd_port4: port@4 { + snd_kf3: port@4 { reg = <4>; rsnd_for_pcm3168a_play3: endpoint { remote-endpoint = <&pcm3168a_endpoint_p3>; @@ -145,7 +146,7 @@ /* * (F) CPU5 */ - rsnd_port5: port@5 { + snd_kf4: port@5 { reg = <5>; rsnd_for_pcm3168a_play4: endpoint { remote-endpoint = <&pcm3168a_endpoint_p4>; @@ -157,7 +158,7 @@ /* * (G) CPU6 */ - rsnd_port6: port@6 { + snd_kf5: port@6 { reg = <6>; rsnd_for_pcm3168a_capture: endpoint { remote-endpoint = <&pcm3168a_endpoint_c>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi index 1db99b7608..5fbd4ca83e 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi @@ -13,18 +13,20 @@ * * (A) aplay -D plughw:0,0 xxx.wav * (B) aplay -D plughw:0,1 xxx.wav - * (C) aplay -D plughw:0,2 xxx.wav + * (C) aplay -D plughw:1,0 xxx.wav * * (A) arecord -D plughw:0,0 xxx.wav - * (D) arecord -D plughw:0,3 xxx.wav + * (D) arecord -D plughw:1,1 xxx.wav */ +/ { + sound_card_kf: expand-sound { + compatible = "audio-graph-card"; + label = "snd-kf"; -&sound_card { - dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ - &rsnd_port1 /* (B) CPU1 -> HDMI */ - &rsnd_port2 /* (C) CPU2 -> PCM3168A-p */ - &rsnd_port3 /* (D) CPU3 <- PCM3168A-c */ + dais = <&snd_kf1 /* (C) CPU2 -> PCM3168A-p */ + &snd_kf2 /* (D) CPU3 <- PCM3168A-c */ >; + }; }; &pcm3168a { @@ -56,12 +58,15 @@ }; &rcar_sound { - ports { - /* rsnd_port0/1 are defined in ulcb.dtsi */ + ports@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* * (C) CPU2 -> PCM3168A-p */ - rsnd_port2: port@2 { + snd_kf1: port@2 { reg = <2>; rsnd_for_pcm3168a_play: endpoint { remote-endpoint = <&pcm3168a_endpoint_p>; @@ -74,7 +79,7 @@ /* * (D) CPU3 <- PCM3168A-c */ - rsnd_port3: port@3 { + snd_kf2: port@3 { reg = <3>; rsnd_for_pcm3168a_capture: endpoint { remote-endpoint = <&pcm3168a_endpoint_c>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi index da644128a9..4cf632bc46 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi @@ -19,61 +19,65 @@ * * (A) aplay -D plughw:0,0 xxx.wav (MIX-0) * (B) aplay -D plughw:0,1 xxx.wav (MIX-1) - * (C) aplay -D plughw:0,2 xxx.wav (TDM-0) - * (D) aplay -D plughw:0,3 xxx.wav (TDM-1) - * (E) aplay -D plughw:0,4 xxx.wav (TDM-2) - * (F) aplay -D plughw:0,5 xxx.wav (TDM-3) + * (C) aplay -D plughw:1,0 xxx.wav (TDM-0) + * (D) aplay -D plughw:1,1 xxx.wav (TDM-1) + * (E) aplay -D plughw:1,2 xxx.wav (TDM-2) + * (F) aplay -D plughw:1,3 xxx.wav (TDM-3) * * (A) arecord -D plughw:0,0 xxx.wav - * (G) arecord -D plughw:0,6 xxx.wav + * (G) arecord -D plughw:1,4 xxx.wav */ -&sound_card { - routing = "ak4613 Playback", "DAI0 Playback", - "ak4613 Playback", "DAI1 Playback", - "DAI0 Capture", "ak4613 Capture", - "pcm3168a Playback", "DAI2 Playback", - "pcm3168a Playback", "DAI3 Playback", - "pcm3168a Playback", "DAI4 Playback", - "pcm3168a Playback", "DAI5 Playback", - "DAI6 Capture", "pcm3168a Capture"; +/ { + sound_card_kf: expand-sound { + compatible = "audio-graph-card2"; + label = "snd-kf-split"; - /delete-property/ dais; - links = <&fe_a /* (A) CPU0 */ - &fe_b /* (B) CPU1 */ - &fe_c /* (C) CPU2 */ - &fe_d /* (D) CPU3 */ - &fe_e /* (E) CPU4 */ - &fe_f /* (F) CPU5 */ - &rsnd_g /* (G) CPU6 */ - &be_x /* (X) ak4613 */ - &be_y /* (Y) PCM3168A-p */ - >; + routing = "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback", + "DAI6 Capture", "pcm3168a Capture"; - dpcm { - ports@0 { - /* - * FE - * - * (A)/(B) are defined on ulcb - * (C) CPU2 - * (D) CPU3 - * (E) CPU4 - * (F) CPU5 - */ - fe_c: port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; }; - fe_d: port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; }; - fe_e: port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; }; - fe_f: port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; }; - }; + links = <&fe_c /* (C) CPU2 */ + &fe_d /* (D) CPU3 */ + &fe_e /* (E) CPU4 */ + &fe_f /* (F) CPU5 */ + &rsnd_g /* (G) CPU6 */ + &be_y /* (Y) PCM3168A-p */ + >; - ports@1 { - /* - * BE - * - * (X) is defined on ulcb - * (Y) PCM3168A-p - */ - be_y: port@1 { reg = <1>; be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; }; + dpcm { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + /* + * FE + * + * (C) CPU2 + * (D) CPU3 + * (E) CPU4 + * (F) CPU5 + */ + fe_c: port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; }; + fe_d: port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; }; + fe_e: port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; }; + fe_f: port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; }; + }; + + ports@1 { + reg = <1>; + /* + * BE + * + * (Y) PCM3168A-p + */ + be_y: port { be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; }; + }; }; }; }; @@ -111,8 +115,10 @@ }; &rcar_sound { - ports { - /* (A)/(B) are defined in ulcb.dtsi */ + ports@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; /* * (C) CPU2 diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi index c30e056538..4fc229418d 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi @@ -13,18 +13,18 @@ * * (A) aplay -D plughw:0,0 xxx.wav * (B) aplay -D plughw:0,1 xxx.wav - * (C) aplay -D plughw:0,2 xxx.wav + * (C) aplay -D plughw:1,0 xxx.wav * * (A) arecord -D plughw:0,0 xxx.wav - * (D) arecord -D plughw:0,3 xxx.wav + * (D) arecord -D plughw:1,1 xxx.wav */ #include "ulcb-kf-audio-graph-card.dtsi" -&sound_card { +&sound_card_kf { + compatible = "audio-graph-card2"; + /delete-property/ dais; - links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ - &rsnd_port1 /* (B) CPU1 -> HDMI */ - &rsnd_port2 /* (C) CPU2 -> PCM3168A-p */ - &rsnd_port3 /* (D) CPU3 <- PCM3168A-c */ + links = <&snd_kf1 /* (C) CPU2 -> PCM3168A-p */ + &snd_kf2 /* (D) CPU3 <- PCM3168A-c */ >; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi index bc221f9944..f01d91aaad 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi @@ -19,89 +19,92 @@ * * (A) aplay -D plughw:0,0 xxx.wav (MIX-0) * (B) aplay -D plughw:0,1 xxx.wav (MIX-1) - * (C) aplay -D plughw:0,2 xxx.wav (TDM-0) - * (D) aplay -D plughw:0,3 xxx.wav (TDM-1) - * (E) aplay -D plughw:0,4 xxx.wav (TDM-2) - * (F) aplay -D plughw:0,5 xxx.wav (TDM-3) + * (C) aplay -D plughw:1,0 xxx.wav (TDM-0) + * (D) aplay -D plughw:1,1 xxx.wav (TDM-1) + * (E) aplay -D plughw:1,2 xxx.wav (TDM-2) + * (F) aplay -D plughw:1,3 xxx.wav (TDM-3) * * (A) arecord -D plughw:0,0 xxx.wav - * (G) arecord -D plughw:0,6 xxx.wav + * (G) arecord -D plughw:1,4 xxx.wav */ -&sound_card { - - simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", - "ak4613 Playback", "DAI1 Playback", - "DAI0 Capture", "ak4613 Capture", - "pcm3168a Playback", "DAI2 Playback", - "pcm3168a Playback", "DAI3 Playback", - "pcm3168a Playback", "DAI4 Playback", - "pcm3168a Playback", "DAI5 Playback"; - - /* dai-link@0 is defined in ulcb.dtsi */ - - simple-audio-card,dai-link@1 { +/ { + sound_card_kf: expand-sound { #address-cells = <1>; #size-cells = <0>; - reg = <1>; - convert-channels = <8>; /* to 8ch TDM */ - /* - * (C) CPU2 - */ - cpu@0 { + compatible = "simple-scu-audio-card"; + label = "snd-kf-split"; + + simple-audio-card,routing = "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback"; + + simple-audio-card,dai-link@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - bitclock-master; - frame-master; - sound-dai = <&rcar_sound 2>; + convert-channels = <8>; /* to 8ch TDM */ + + /* + * (C) CPU2 + */ + cpu@0 { + reg = <0>; + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 2>; + }; + /* + * (D) CPU3 + */ + cpu@1 { + reg = <1>; + sound-dai = <&rcar_sound 3>; + }; + /* + * (E) CPU4 + */ + cpu@2 { + reg = <2>; + sound-dai = <&rcar_sound 4>; + }; + /* + * (F) CPU5 + */ + cpu@3 { + reg = <3>; + sound-dai = <&rcar_sound 5>; + }; + /* + * (Y) PCM3168A-p + */ + codec { + prefix = "pcm3168a"; + mclk-fs = <512>; + sound-dai = <&pcm3168a 0>; + }; }; - /* - * (D) CPU3 - */ - cpu@1 { + + simple-audio-card,dai-link@1 { reg = <1>; - sound-dai = <&rcar_sound 3>; - }; - /* - * (E) CPU4 - */ - cpu@2 { - reg = <2>; - sound-dai = <&rcar_sound 4>; - }; - /* - * (F) CPU5 - */ - cpu@3 { - reg = <3>; - sound-dai = <&rcar_sound 5>; - }; - /* - * (Y) PCM3168A-p - */ - codec { - prefix = "pcm3168a"; - mclk-fs = <512>; - sound-dai = <&pcm3168a 0>; - }; - }; - simple-audio-card,dai-link@2 { - reg = <2>; - /* - * (G) CPU6 - */ - cpu { - bitclock-master; - frame-master; - sound-dai = <&rcar_sound 6>; - }; - /* - * (Z) PCM3168A-c - */ - codec { - prefix = "pcm3168a"; - mclk-fs = <512>; - sound-dai = <&pcm3168a 1>; + /* + * (G) CPU6 + */ + cpu { + bitclock-master; + frame-master; + sound-dai = <&rcar_sound 6>; + }; + /* + * (Z) PCM3168A-c + */ + codec { + prefix = "pcm3168a"; + mclk-fs = <512>; + sound-dai = <&pcm3168a 1>; + }; }; }; }; @@ -115,7 +118,8 @@ }; &rcar_sound { - rcar_sound,dai { + rcar_sound,dai@1 { + reg = <1>; /* dai0-1 are defined in ulcb.dtsi */ diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi index 2010e8ac7f..28d29ecfb3 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi @@ -13,45 +13,51 @@ * * (A) aplay -D plughw:0,0 xxx.wav * (B) aplay -D plughw:0,1 xxx.wav - * (C) aplay -D plughw:0,2 xxx.wav + * (C) aplay -D plughw:1,0 xxx.wav * * (A) arecord -D plughw:0,0 xxx.wav - * (D) arecord -D plughw:0,3 xxx.wav + * (D) arecord -D plughw:1,1 xxx.wav */ -&sound_card { - /* dai-link@0/1 are defined in ulcb.dtsi */ +/ { + sound_card_kf: expand-sound { + compatible = "simple-audio-card"; + label = "snd-kf"; - /* - * (C) CPU2 -> PCM3168A-p - */ - simple-audio-card,dai-link@2 { - reg = <2>; - cpu { - bitclock-master; - frame-master; - dai-tdm-slot-num = <8>; - sound-dai = <&rcar_sound 2>; - }; - codec { - mclk-fs = <512>; - sound-dai = <&pcm3168a 0>; - }; - }; - /* - * (D) CPU3 <- PCM3168A-c - */ - simple-audio-card,dai-link@3 { - reg = <3>; - cpu { - bitclock-master; - frame-master; - dai-tdm-slot-num = <6>; - sound-dai = <&rcar_sound 3>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * (C) CPU2 -> PCM3168A-p + */ + simple-audio-card,dai-link@0 { + reg = <0>; + cpu { + bitclock-master; + frame-master; + dai-tdm-slot-num = <8>; + sound-dai = <&rcar_sound 2>; + }; + codec { + mclk-fs = <512>; + sound-dai = <&pcm3168a 0>; + }; }; - codec { - mclk-fs = <512>; - sound-dai = <&pcm3168a 1>; + /* + * (D) CPU3 <- PCM3168A-c + */ + simple-audio-card,dai-link@1 { + reg = <1>; + cpu { + bitclock-master; + frame-master; + dai-tdm-slot-num = <6>; + sound-dai = <&rcar_sound 3>; + }; + codec { + mclk-fs = <512>; + sound-dai = <&pcm3168a 1>; + }; }; }; }; @@ -65,9 +71,8 @@ }; &rcar_sound { - - rcar_sound,dai { - /* dai0-1 are defined in ulcb.dtsi */ + rcar_sound,dai@1 { + reg = <1>; /* * (C) CPU2 -> PCM3168A-p diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi index 217d890198..9b955510e3 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi @@ -24,7 +24,7 @@ #size-cells = <0>; compatible = "simple-scu-audio-card"; - label = "rcar-sound"; + label = "snd-ulcb-mix"; simple-audio-card,prefix = "ak4613"; simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", @@ -72,9 +72,13 @@ }; &rcar_sound { + #address-cells = <1>; + #size-cells = <0>; #sound-dai-cells = <1>; - rcar_sound,dai { + rcar_sound,dai@0 { + reg = <0>; + /* * (A) CPU0 */ diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi index 751cfd8c52..ba0e188e7b 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi @@ -18,7 +18,7 @@ / { sound_card: sound { compatible = "simple-audio-card"; - label = "rcar-sound"; + label = "snd-ulcb"; #address-cells = <1>; #size-cells = <0>; @@ -69,9 +69,13 @@ }; &rcar_sound { + #address-cells = <1>; + #size-cells = <0>; #sound-dai-cells = <1>; - rcar_sound,dai { + rcar_sound,dai@0 { + reg = <0>; + /* * (A) CPU0 <-> ak4613 */ diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0be2716659..a2f66f9160 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -383,7 +383,7 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + <&cpg CPG_MOD 922>; }; &rpc { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index e7728007fd..a18f33bf0c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb @@ -101,7 +102,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts index de0a1f2af9..7d4c5324c6 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -86,7 +86,7 @@ sgtl5000_clk: sgtl5000-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; + clock-frequency = <24576000>; }; dc_12v: dc-12v-regulator { diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 42ce78beb4..20955556b6 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -632,6 +632,7 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&dmac 12>, <&dmac 13>; dma-names = "tx", "rx"; + num-cs = <2>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>; #address-cells = <1>; @@ -647,6 +648,7 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&dmac 14>, <&dmac 15>; dma-names = "tx", "rx"; + num-cs = <2>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 4a3d0af5ec..da0dfb237f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1360,7 +1360,6 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru PCLK_DDR_MON>; clock-names = "pclk_ddr_mon"; - status = "disabled"; }; vpu: video-codec@ff650000 { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts new file mode 100644 index 0000000000..1ead3c5c24 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg353x.dtsi" + +/ { + model = "RGB30"; + compatible = "powkiddy,rgb30", "rockchip,rk3566"; + + aliases { + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3151000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4250000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>, + <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>, + <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>, + <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>, + <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>, + <3400000 0>; + }; + + /* + * Channels reversed for speakers. Headphones automatically switch via hardware when + * detected with no ability to control output in software. Headphones appear to be mono + * (each output channel receives all audio). No microphone support on 3.5mm jack. + */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Headphones"; + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; +}; + +/delete-node/ &adc_keys; + +&chosen { + /delete-property/ stdout-path; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <292500000>; +}; + +&gpio_keys_control { + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; +}; + +/delete-node/ &{/i2c@fdd40000/regulator@40}; + +&i2c0 { + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +/* + * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as + * red_led0 and red_led1. + */ +/delete-node/ &{/pwm-leds/led-1}; +/delete-node/ &{/pwm-leds/led-2}; + +&leds { + red_led0: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_CHARGING; + max-brightness = <255>; + pwms = <&pwm7 0 25000 0>; + }; + + red_led1: led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm0 0 25000 0>; + }; +}; + +&panel { + compatible = "powkiddy,rgb30-panel"; + vcc-supply = <&vcc3v3_lcd0_n>; + iovcc-supply = <&vcc3v3_lcd0_n>; + /delete-property/ vdd-supply; +}; + +&pwm5 { + status = "disabled"; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; + +/* There is no UART header visible on the board for this device. */ +&uart2 { + status = "disabled"; +}; + +/delete-node/ &vibrator; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index e05ab11981..a5e974ea65 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -15,6 +15,7 @@ ethernet0 = &gmac1; mmc0 = &sdhci; mmc1 = &sdmmc0; + mmc2 = &sdmmc2; }; chosen: chosen { @@ -747,6 +748,9 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; sd-uhs-sdr104; vmmc-supply = <&vcc3v3_sys>; vqmmc-supply = <&vcc_1v8>; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index b7e2b475f0..c19c0f1b37 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -959,6 +959,13 @@ reg = <0x0 0xfe1a8100 0x0 0x20>; }; + dfi: dfi@fe230000 { + compatible = "rockchip,rk3568-dfi"; + reg = <0x00 0xfe230000 0x00 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + rockchip,pmu = <&pmugrf>; + }; + pcie2x1: pcie@fe260000 { compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0000000 0x0 0x00400000>, diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 229a9111f5..b9d789d578 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> #include "rk3588.dtsi" @@ -23,12 +24,84 @@ stdout-path = "serial2:1500000n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + + button-menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <890000>; + }; + + button-escape { + label = "Escape"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1235000>; + }; + }; + backlight: backlight { compatible = "pwm-backlight"; power-supply = <&vcc12v_dcin>; pwms = <&pwm2 0 25000 0>; }; + pcie20_avdd0v85: pcie20-avdd0v85-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie20_avdd0v85"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&avdd_0v85_s0>; + }; + + pcie20_avdd1v8: pcie20-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie20_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + pcie30_avdd0v75: pcie30-avdd0v75-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v75"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + vin-supply = <&avdd_0v75_s0>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -38,6 +111,19 @@ regulator-max-microvolt = <12000000>; }; + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + vin-supply = <&vcc12v_dcin>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie30_en>; + }; + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; @@ -87,6 +173,10 @@ status = "okay"; }; +&combphy2_psu { + status = "okay"; +}; + &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; @@ -163,7 +253,32 @@ }; }; +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>, <&rtl8111_isolate>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_reset>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + &pinctrl { + rtl8111 { + rtl8111_isolate: rtl8111-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + rtl8211f { rtl8211f_rst: rtl8211f-rst { rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -177,6 +292,22 @@ }; }; + pcie2 { + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3_reset: pcie3-reset { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc3v3_pcie30_en: vcc3v3-pcie30-en { + rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -188,6 +319,11 @@ status = "okay"; }; +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + &sdhci { bus-width = <8>; no-sdio; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts new file mode 100644 index 0000000000..298c183d6f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -0,0 +1,848 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 OndÅ™ej Jirman <megi@xff.cz> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Plus"; + compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys-0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <2000>; + }; + }; + + adc-keys-1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <2000>; + }; + }; + + speaker_amp: speaker-audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + }; + + headphone_amp: headphones-audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Amp"; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&blue_led_pin>; + + led { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 70 75 80 100>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm3 0 50000 0>; + #cooling-cells = <2>; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + max-brightness = <255>; + pwms = <&pwm2 0 25000 0>; + }; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "Analog"; + simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; + simple-audio-card,bitclock-master = <&daicpu>; + simple-audio-card,frame-master = <&daicpu>; + /*TODO: SARADC_IN3 is used as MIC detection / key input */ + + simple-audio-card,widgets = + "Microphone", "Onboard Microphone", + "Microphone", "Microphone Jack", + "Speaker", "Speaker", + "Headphone", "Headphones"; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "Speaker", "LOUT2", + "Speaker", "ROUT2", + + "Headphones", "Headphones Amp OUTL", + "Headphones", "Headphones Amp OUTR", + "Headphones Amp INL", "LOUT1", + "Headphones Amp INR", "ROUT1", + + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "LOUT2", + "Speaker Amp INR", "ROUT2", + + /* single ended signal to LINPUT1 */ + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + /* differential signal */ + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + + daicpu: simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + system-clock-frequency = <12288000>; + }; + + daicodec: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie_eth: vcc3v3-pcie-eth-regulator { + compatible = "regulator-fixed"; + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + regulator-name = "vcc3v3_pcie_eth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_wf: vcc3v3-wf-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_wf"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb20: vcc5v0-usb20-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb20_en>; + regulator-name = "vcc5v0_usb20"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */ + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + AVDD-supply = <&vcc_1v8_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&i2s2_2ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m0_lrck + &i2s2m0_sclk + &i2s2m0_sdi + &i2s2m0_sdo>; + status = "okay"; +}; + +/* phy1 - M.KEY socket */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_wf>; + status = "okay"; +}; + +/* phy2 - right ethernet port */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_eth>; + status = "okay"; +}; + +/* phy0 - left ethernet port */ +&pcie2x1l2 { + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_eth>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + blue_led_pin: blue-led { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir-receiver { + ir_receiver_pin: ir-receiver-pin { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb20_en: vcc5v0-usb20-en { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm3 { + pinctrl-0 = <&pwm3m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim1_pins>; + status = "okay"; + + spi_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vdd2_ddr_s3>; + vcc14-supply = <&vdd2_ddr_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <825000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <825000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* shorted to avcc_1v8_s0 on the board */ + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + /* + * The schematic mentions that actual setting + * should be 0.8375V. RK3588 datasheet specifies + * maximum as 0.825V. So we set datasheet max + * here. + */ + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <825000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb20>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart9 { + pinctrl-0 = <&uart9m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts new file mode 100644 index 0000000000..5c59f9571d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -0,0 +1,1137 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 OndÅ™ej Jirman <megi@xff.cz> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588.dtsi" + +/ { + model = "PINE64 QuartzPro64"; + compatible = "pine64,quartzpro64", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys-0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <393>; + }; + }; + + adc-keys-1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-volume-up { + label = "V+/REC"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17821>; + }; + + button-volume-down { + label = "V-"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <415384>; + }; + + button-menu { + label = "MENU"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <890909>; + }; + + button-esc { + label = "ESC"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1233962>; + }; + }; + + headphone_amp: audio-amplifier-headphone { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Amp"; + }; + + speaker_amp: audio-amplifier-speaker { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led-1 { + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "Analog"; + simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + simple-audio-card,bitclock-master = <&daicpu>; + simple-audio-card,frame-master = <&daicpu>; + /* SARADC_IN3 is used as MIC detection / key input */ + + simple-audio-card,widgets = + "Microphone", "Onboard Microphone", + "Microphone", "Microphone Jack", + "Speaker", "Speaker", + "Headphone", "Headphones"; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "Speaker", "LOUT2", + "Speaker", "ROUT2", + + "Headphones", "Headphones Amp OUTL", + "Headphones", "Headphones Amp OUTR", + "Headphones Amp INL", "LOUT1", + "Headphones Amp INR", "ROUT1", + + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "LOUT2", + "Speaker Amp INR", "ROUT2", + + /* single ended signal to LINPUT1 */ + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + /* differential signal */ + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + + daicpu: simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + system-clock-frequency = <12288000>; + }; + + daicodec: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_bt: vcc3v3-bt-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc_3v3_s0>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_wf: vcc3v3-wf-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_wf"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc_3v3_s0>; + }; + + vcc4v0_sys: vcc4v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc4v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-rxid"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + rx_delay = <0x00>; + tx_delay = <0x43>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + AVDD-supply = <&avcc_1v8_codec_s0>; + DVDD-supply = <&avcc_1v8_codec_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rtl8111 { + rtl8111_isolate: rtl8111-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +/* WIFI */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_wf>; + status = "okay"; +}; + +/* GMAC1 */ +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&rtl8111_isolate>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <150000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <2>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc4v0_sys>; + vcc2-supply = <&vcc4v0_sys>; + vcc3-supply = <&vcc4v0_sys>; + vcc4-supply = <&vcc4v0_sys>; + vcc5-supply = <&vcc4v0_sys>; + vcc6-supply = <&vcc4v0_sys>; + vcc7-supply = <&vcc4v0_sys>; + vcc8-supply = <&vcc4v0_sys>; + vcc9-supply = <&vcc4v0_sys>; + vcc10-supply = <&vcc4v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc4v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc4v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-name = "vdd_gpu_mem_s0"; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-name = "vdd_npu_mem_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-name = "vdd_vdenc_mem_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_codec_s0: pldo-reg3 { + regulator-name = "avcc_1v8_codec_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s3: pldo-reg4 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: pldo-reg6 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + /* reserved for LPDDR5, unused? */ + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_0v75_hdmi_edp_s0: nldo-reg3 { + regulator-name = "vdd_0v75_hdmi_edp_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + pmic@1 { + compatible = "rockchip,rk806"; + reg = <0x01>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>, + <&rk806_slave_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc4v0_sys>; + vcc2-supply = <&vcc4v0_sys>; + vcc3-supply = <&vcc4v0_sys>; + vcc4-supply = <&vcc4v0_sys>; + vcc5-supply = <&vcc4v0_sys>; + vcc6-supply = <&vcc4v0_sys>; + vcc7-supply = <&vcc4v0_sys>; + vcc8-supply = <&vcc4v0_sys>; + vcc9-supply = <&vcc4v0_sys>; + vcc10-supply = <&vcc4v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc4v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc4v0_sys>; + + rk806_slave_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_slave_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_slave_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_cpu_big1_s0: dcdc-reg1 { + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big0_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: dcdc-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_mem_s0: dcdc-reg5 { + regulator-name = "vdd_cpu_big1_mem_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + + vdd_cpu_big0_mem_s0: dcdc-reg6 { + regulator-name = "vdd_cpu_big0_mem_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: dcdc-reg7 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_mem_s0: dcdc-reg8 { + regulator-name = "vdd_cpu_lit_mem_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* reserved, unused? */ + vcc_1v8_cam_s0: pldo-reg1 { + regulator-name = "vcc_1v8_cam_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd1v8_ddr_pll_s0: pldo-reg2 { + regulator-name = "avdd1v8_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_1v8_pll_s0: pldo-reg3 { + regulator-name = "vdd_1v8_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* reserved, unused? */ + vcc_3v3_sd_s0: pldo-reg4 { + regulator-name = "vcc_3v3_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* reserved, unused? */ + vcc_2v8_cam_s0: pldo-reg5 { + regulator-name = "vcc_2v8_cam_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* unused */ + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_pll_s0: nldo-reg1 { + regulator-name = "vdd_0v75_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v85_s0: nldo-reg3 { + regulator-name = "avdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* reserved, unused */ + avdd_1v2_cam_s0: nldo-reg4 { + regulator-name = "avdd_1v2_cam_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_1v2_s0: nldo-reg5 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 8ab60968f2..741f631db3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -3,6 +3,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include "rk3588.dtsi" / { @@ -12,6 +13,7 @@ aliases { mmc0 = &sdhci; mmc1 = &sdmmc; + mmc2 = &sdio; serial2 = &uart2; }; @@ -36,6 +38,19 @@ pinctrl-0 = <&hp_detect>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_b>; + + led_rgb_b { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + fan: pwm-fan { compatible = "pwm-fan"; cooling-levels = <0 95 145 195 255>; @@ -44,6 +59,43 @@ #cooling-cells = <2>; }; + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_vcc3v3_en>; + regulator-name = "vcc3v3_pcie2x1l0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_vcc3v3_en>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; @@ -78,6 +130,14 @@ }; }; +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; @@ -204,6 +264,34 @@ }; }; +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; + status = "okay"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_2_rst>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_rst>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { @@ -211,12 +299,42 @@ }; }; + leds { + led_rgb_b: led-rgb-b { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sound { hp_detect: hp-detect { rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + pcie2 { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_0_vcc3v3_en: pcie2-0-vcc-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_2_rst: pcie2-2-rst { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3_rst: pcie3-rst { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3_vcc3v3_en: pcie3-vcc3v3-en { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -258,6 +376,33 @@ status = "okay"; }; +&sdio { + max-frequency = <200000000>; + no-sd; + no-mmc; + non-removable; + bus-width = <4>; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + wakeup-source; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_pcie2x1l0>; + vqmmc-supply = <&vcc_1v8_s3>; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom0_pins>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; + status = "okay"; +}; + &spi2 { status = "okay"; assigned-clocks = <&cru CLK_SPI2>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts new file mode 100644 index 0000000000..7bcad28d73 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * This device tree covers the common case where the RK1 is used as a + * "compute node" system, where the carrier board is functioning more like a + * generic backplane (with no non-autoenumerable peripherals of its own) than + * like a device that the SoM is meant to enable. + * + * Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com> + */ + +/dts-v1/; +#include "rk3588-turing-rk1.dtsi" + +/ { + model = "Turing Machines RK1"; + compatible = "turing,rk1", "rockchip,rk3588"; + + chosen { + stdout-path = "serial9:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi new file mode 100644 index 0000000000..d88c0e8523 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree definitions for the Turing RK1 SoM. + * + * Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com> + * + * Based on RK3588-EVB1 devicetree + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + compatible = "turing,rk1", "rockchip,rk3588"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + serial2 = &uart2; + serial9 = &uart9; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 25 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0m2_pins &fan_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; + pwms = <&pwm0 0 50000 0>; + #cooling-cells = <2>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie30_en>; + startup-delay-us = <5000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + pinctrl-names = "default"; + rx_delay = <0x00>; + tx_delay = <0x43>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m2_xfer>; + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916", + "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <15000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l1 { + linux,pci-domain = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_reset>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + linux,pci-domain = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_reset>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + fan { + fan_int: fan-int { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie2 { + pcie2_reset: pcie2-reset { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3_reset: pcie3-reset { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc3v3_pcie30_en: pcie3-reg { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart9 { + pinctrl-0 = <&uart9m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index d1503a4b23..3b675fd0c5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -3,6 +3,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/usb/pd.h> #include "rk3588s.dtsi" @@ -11,6 +12,34 @@ model = "Indiedroid Nova"; compatible = "indiedroid,nova", "rockchip,rk3588s"; + adc-keys-0 { + compatible = "adc-keys"; + io-channel-names = "buttons"; + io-channels = <&saradc 0>; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-boot { + label = "boot"; + linux,code = <KEY_PROG1>; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys-1 { + compatible = "adc-keys"; + io-channel-names = "buttons"; + io-channels = <&saradc 1>; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "recovery"; + linux,code = <KEY_PROG2>; + press-threshold-microvolt = <18000>; + }; + }; + aliases { mmc0 = &sdhci; mmc1 = &sdmmc; @@ -109,6 +138,10 @@ }; }; +&combphy0_ps { + status = "okay"; +}; + &cpu_l0 { cpu-supply = <&vdd_cpu_lit_s0>; }; @@ -163,13 +196,13 @@ &gpio1 { gpio-line-names = /* GPIO1 A0-A7 */ - "HEADER_27_3v3", "HEADER_28_3v3", "", "", + "HEADER_27_3v3", "", "", "", "HEADER_29_1v8", "", "HEADER_7_1v8", "", /* GPIO1 B0-B7 */ "", "HEADER_31_1v8", "HEADER_33_1v8", "", "HEADER_11_1v8", "HEADER_13_1v8", "", "", /* GPIO1 C0-C7 */ - "", "", "", "", + "", "HEADER_28_3v3", "", "", "", "", "", "", /* GPIO1 D0-D7 */ "", "", "", "", @@ -193,11 +226,11 @@ &gpio4 { gpio-line-names = /* GPIO4 A0-A7 */ - "", "", "HEADER_37_3v3", "HEADER_32_3v3", - "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3", + "", "", "HEADER_37_3v3", "HEADER_8_3v3", + "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3", /* GPIO4 B0-B7 */ "", "", "", "HEADER_40_3v3", - "HEADER_8_3v3", "HEADER_10_3v3", "", "", + "HEADER_38_3v3", "HEADER_36_3v3", "", "", /* GPIO4 C0-C7 */ "", "", "", "", "", "", "", "", @@ -348,6 +381,12 @@ }; }; +&pcie2x1l2 { + pinctrl-0 = <&rtl8111_perstb>; + pinctrl-names = "default"; + status = "okay"; +}; + &pinctrl { bluetooth-pins { bt_reset: bt-reset { @@ -366,6 +405,12 @@ }; }; + ethernet-pins { + rtl8111_perstb: rtl8111-perstb { + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + hym8563 { hym8563_int: hym8563-int { @@ -394,6 +439,11 @@ }; }; +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + /* HS400 modes seemed to cause io errors. */ &sdhci { bus-width = <8>; @@ -735,6 +785,24 @@ status = "okay"; }; +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; @@ -759,3 +827,19 @@ pinctrl-names = "default"; }; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts new file mode 100644 index 0000000000..e3a839a12d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts @@ -0,0 +1,662 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "Xunlong Orange Pi 5"; + compatible = "xunlong,orangepi-5", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdmmc; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1800>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_gpio>; + + led-1 { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; + label = "status_led"; + linux,default-trigger = "heartbeat"; + }; + }; + + vbus_typec: vbus-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vbus_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-low; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie20: vcc3v3-pcie20-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie20"; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + pinctrl-names = "default"; + tx_delay = <0x42>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie20>; + status = "okay"; +}; + +&pinctrl { + gpio-func { + leds_gpio: leds-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + typec5v_pwren: typec5v-pwren { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim0_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi index 0933652baf..30db12c4fc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi @@ -1350,6 +1350,41 @@ i2s2 { /omit-if-no-ref/ + i2s2m0_lrck: i2s2m0-lrck { + rockchip,pins = + /* i2s2m0_lrck */ + <2 RK_PC0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_mclk: i2s2m0-mclk { + rockchip,pins = + /* i2s2m0_mclk */ + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sclk: i2s2m0-sclk { + rockchip,pins = + /* i2s2m0_sclk */ + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sdi: i2s2m0-sdi { + rockchip,pins = + /* i2s2m0_sdi */ + <2 RK_PC3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + i2s2m0_sdo: i2s2m0-sdo { + rockchip,pins = + /* i2s2m0_sdo */ + <4 RK_PC3 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ i2s2m1_lrck: i2s2m1-lrck { rockchip,pins = /* i2s2m1_lrck */ @@ -3308,6 +3343,15 @@ uart9 { /omit-if-no-ref/ + uart9m0_xfer: uart9m0-xfer { + rockchip,pins = + /* uart9_rx_m0 */ + <2 RK_PC4 10 &pcfg_pull_up>, + /* uart9_tx_m0 */ + <2 RK_PC2 10 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ uart9m1_xfer: uart9m1-xfer { rockchip,pins = /* uart9_rx_m1 */ diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 4aa516ff15..f9f9749848 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -443,6 +443,32 @@ status = "disabled"; }; + usb_host2_xhci: usb@fcd00000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfcd00000 0x0 0x400000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>, + <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>, + <&cru CLK_PIPEPHY2_PIPE_U3_G>; + clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe"; + dr_mode = "host"; + phys = <&combphy2_psu PHY_TYPE_USB3>; + phy-names = "usb3-phy"; + phy_type = "utmi_wide"; + resets = <&cru SRST_A_USB3OTG2>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + pmu1grf: syscon@fd58a000 { + compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xfd58a000 0x0 0x10000>; + }; + sys_grf: syscon@fd58c000 { compatible = "rockchip,rk3588-sys-grf", "syscon"; reg = <0x0 0xfd58c000 0x0 0x1000>; @@ -1330,6 +1356,16 @@ }; }; + dfi: dfi@fe060000 { + reg = <0x00 0xfe060000 0x00 0x10000>; + compatible = "rockchip,rk3588-dfi"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + rockchip,pmu = <&pmu1grf>; + }; + gmac1: ethernet@fe1c0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1c0000 0x0 0x10000>; @@ -1425,6 +1461,17 @@ }; }; + sfc: spi@fe2b0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xfe2b0000 0x0 0x4000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdmmc: mmc@fe2c0000 { compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe2c0000 0x0 0x4000>; @@ -2305,6 +2352,19 @@ #interrupt-cells = <2>; }; }; + + av1d: video-codec@fdc70000 { + compatible = "rockchip,rk3588-av1-vpu"; + reg = <0x0 0xfdc70000 0x0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdpu"; + assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + assigned-clock-rates = <400000000>, <400000000>; + clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3588_PD_AV1>; + resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>; + }; }; #include "rk3588s-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 7bb36b0714..4680571c26 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -52,6 +52,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 4e21716302..335093da65 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -86,10 +86,14 @@ a72_l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; a53_l2: l2-cache1 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 38ccfb46ea..d6e3cc6fdb 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -83,6 +83,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi index 97ac550af2..cc4459551e 100644 --- a/arch/arm64/boot/dts/sprd/ums512.dtsi +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -113,7 +113,7 @@ idle-states { entry-method = "psci"; - CORE_PD: core-pd { + CORE_PD: cpu-pd { compatible = "arm,idle-state"; entry-latency-us = <4000>; exit-latency-us = <4000>; @@ -291,6 +291,7 @@ pll2: clock-controller@0 { compatible = "sprd,ums512-gc-pll"; reg = <0x0 0x100>; + clocks = <&ext_26m>; clock-names = "ext-26m"; #clock-cells = <1>; }; diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi index d34a1d5e79..66791a974f 100644 --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -6,6 +6,60 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */ + <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */ + <STM32_PINMUX('E', 1, AF10)>, /* SDMMC1_D3 */ + <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */ + <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */ + <STM32_PINMUX('E', 1, AF10)>; /* SDMMC1_D3 */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */ + slew-rate = <2>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 4, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 0, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('E', 1, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('E', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */ diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 5268a43218..124403f5f1 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -28,6 +28,12 @@ interrupt-parent = <&intc>; }; + arm_wdt: watchdog { + compatible = "arm,smc-wdt"; + arm,smc-id = <0xb200005a>; + status = "disabled"; + }; + clocks { ck_flexgen_08: ck-flexgen-08 { #clock-cells = <0>; @@ -119,6 +125,19 @@ clocks = <&ck_flexgen_08>; status = "disabled"; }; + + sdmmc1: mmc@48220000 { + compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00353180>; + reg = <0x48220000 0x400>, <0x44230400 0x8>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_51>; + clock-names = "apb_pclk"; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; }; syscfg: syscon@44230000 { diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 39b4726cc0..b2d3afb157 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "stm32mp257.dtsi" #include "stm32mp25xf.dtsi" #include "stm32mp25-pinctrl.dtsi" @@ -39,6 +40,32 @@ no-map; }; }; + + vdd_sdcard: vdd-sdcard { + compatible = "regulator-fixed"; + regulator-name = "vdd_sdcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&arm_wdt { + timeout-sec = <32>; + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiod 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sdcard>; + status = "okay"; }; &usart2 { diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 8bd5acc6d6..77a347f9f4 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -46,6 +46,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb # Boards with AM65x SoC k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo +k3-am654-evm-dtbs := k3-am654-base-board.dtb k3-am654-icssg2.dtbo +k3-am654-idk-dtbs := k3-am654-evm.dtb k3-am654-idk.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb @@ -53,6 +55,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb # Boards with J7200 SoC k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 284b90c94d..e5c64c86d1 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -81,7 +81,8 @@ }; dmss: bus@48000000 { - compatible = "simple-mfd"; + bootph-all; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; dma-ranges; @@ -90,6 +91,7 @@ ti,sci-dev-id = <25>; secure_proxy_main: mailbox@4d000000 { + bootph-all; compatible = "ti,am654-secure-proxy"; #mbox-cells = <1>; reg-names = "target_data", "rt", "scfg"; @@ -165,6 +167,7 @@ }; dmsc: system-controller@44043000 { + bootph-all; compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; @@ -174,16 +177,19 @@ reg = <0x00 0x44043000 0x00 0xfe0>; k3_pds: power-controller { + bootph-all; compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; }; k3_clks: clock-controller { + bootph-all; compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; k3_reset: reset-controller { + bootph-all; compatible = "ti,sci-reset"; #reset-cells = <2>; }; @@ -202,6 +208,7 @@ }; secure_proxy_sa3: mailbox@43600000 { + bootph-pre-ram; compatible = "ti,am654-secure-proxy"; #mbox-cells = <1>; reg-names = "target_data", "rt", "scfg"; @@ -217,6 +224,7 @@ }; main_pmx0: pinctrl@f4000 { + bootph-all; compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; #pinctrl-cells = <1>; @@ -225,12 +233,14 @@ }; main_esm: esm@420000 { + bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x420000 0x00 0x1000>; ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; }; main_timer0: timer@2400000 { + bootph-all; compatible = "ti,am654-timer"; reg = <0x00 0x2400000 0x00 0x400>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index 80a3e1db26..0e0b234581 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -7,6 +7,7 @@ &cbass_mcu { mcu_pmx0: pinctrl@4084000 { + bootph-all; compatible = "pinctrl-single"; reg = <0x00 0x04084000 0x00 0x88>; #pinctrl-cells = <1>; @@ -15,6 +16,7 @@ }; mcu_esm: esm@4100000 { + bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x4100000 0x00 0x1000>; ti,esm-pins = <0>, <1>, <2>, <85>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi index 90ddc71bcd..a6808b10c7 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi @@ -35,5 +35,11 @@ &main_uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + fw-init-baudrate = <3000000>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index eae0528871..fef76f52a5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -7,6 +7,7 @@ &cbass_wakeup { wkup_conf: syscon@43000000 { + bootph-all; compatible = "syscon", "simple-mfd"; reg = <0x00 0x43000000 0x00 0x20000>; #address-cells = <1>; @@ -14,6 +15,7 @@ ranges = <0x0 0x00 0x43000000 0x20000>; chipid: chipid@14 { + bootph-all; compatible = "ti,am654-chipid"; reg = <0x14 0x4>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index 11f14eef2d..f1e15206e1 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -47,6 +47,7 @@ }; cbass_main: bus@f0000 { + bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -86,6 +87,7 @@ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; cbass_mcu: bus@4000000 { + bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -93,6 +95,7 @@ }; cbass_wakeup: bus@b00000 { + bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 2de74428a8..9a6bd0a3c9 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -46,6 +46,7 @@ }; memory@80000000 { + bootph-pre-ram; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; @@ -83,6 +84,7 @@ }; vsys_5v0: regulator-1 { + bootph-all; compatible = "regulator-fixed"; regulator-name = "vsys_5v0"; regulator-min-microvolt = <5000000>; @@ -93,6 +95,7 @@ vdd_3v3: regulator-2 { /* output of TLV62595DMQR-U12 */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; regulator-min-microvolt = <3300000>; @@ -118,6 +121,7 @@ vdd_3v3_sd: regulator-4 { /* output of TPS22918DBVR-U21 */ + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&vdd_3v3_sd_pins_default>; @@ -132,6 +136,7 @@ }; vdd_sd_dv: regulator-5 { + bootph-all; compatible = "regulator-gpio"; regulator-name = "sd_hs200_switch"; pinctrl-names = "default"; @@ -146,9 +151,11 @@ }; leds { + bootph-all; compatible = "gpio-leds"; led-0 { + bootph-all; gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; function = LED_FUNCTION_HEARTBEAT; @@ -156,6 +163,7 @@ }; led-1 { + bootph-all; gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; function = LED_FUNCTION_DISK_ACTIVITY; @@ -163,16 +171,19 @@ }; led-2 { + bootph-all; gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; function = LED_FUNCTION_CPU; }; led-3 { + bootph-all; gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; function = LED_FUNCTION_LAN; }; led-4 { + bootph-all; gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>; function = LED_FUNCTION_WLAN; }; @@ -245,6 +256,7 @@ &main_pmx0 { gpio0_pins_default: gpio0-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */ AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */ @@ -264,6 +276,7 @@ }; vdd_sd_dv_pins_default: vdd-sd-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ >; @@ -283,6 +296,7 @@ }; local_i2c_pins_default: local-i2c-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ @@ -321,6 +335,7 @@ }; emmc_pins_default: emmc-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ @@ -336,12 +351,14 @@ }; vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */ >; }; sd_pins_default: sd-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ @@ -418,6 +435,7 @@ }; mikrobus_gpio_pins_default: mikrobus-gpio-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */ AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */ @@ -426,6 +444,7 @@ }; console_pins_default: console-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ @@ -597,6 +616,7 @@ }; &main_gpio0 { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&gpio0_pins_default>; gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */ @@ -616,6 +636,7 @@ }; &main_gpio1 { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&mikrobus_gpio_pins_default>; gpio-line-names = "", "", "", "", "", /* 0-4 */ @@ -633,6 +654,7 @@ }; &main_i2c0 { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&local_i2c_pins_default>; clock-frequency = <400000>; @@ -651,6 +673,7 @@ }; tps65219: pmic@30 { + bootph-all; compatible = "ti,tps65219"; reg = <0x30>; buck1-supply = <&vsys_5v0>; @@ -801,6 +824,7 @@ }; &sdhci0 { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&emmc_pins_default>; ti,driver-strength-ohm = <50>; @@ -810,6 +834,7 @@ &sdhci1 { /* SD/MMC */ + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&sd_pins_default>; @@ -850,6 +875,7 @@ }; &main_uart0 { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&console_pins_default>; status = "okay"; @@ -870,6 +896,12 @@ pinctrl-names = "default"; pinctrl-0 = <&wifi_debug_uart_pins_default>; status = "okay"; + + mcu { + compatible = "ti,cc1352p7"; + reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>; + vdds-supply = <&vdd_3v3>; + }; }; &dss { diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 7c98c1b855..b18092497c 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -31,6 +31,7 @@ vmain_pd: regulator-0 { /* TPS65988 PD CONTROLLER OUTPUT */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vmain_pd"; regulator-min-microvolt = <5000000>; @@ -41,6 +42,7 @@ vcc_5v0: regulator-1 { /* Output of LM34936 */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vcc_5v0"; regulator-min-microvolt = <5000000>; @@ -52,6 +54,7 @@ vcc_3v3_sys: regulator-2 { /* output of LM61460-Q1 */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; regulator-min-microvolt = <3300000>; @@ -63,6 +66,7 @@ vdd_mmc1: regulator-3 { /* TPS22918DBVR */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; @@ -75,6 +79,7 @@ vdd_sd_dv: regulator-4 { /* Output of TLV71033 */ + bootph-all; compatible = "regulator-gpio"; regulator-name = "tlv71033"; pinctrl-names = "default"; @@ -102,6 +107,7 @@ &main_pmx0 { main_rgmii2_pins_default: main-rgmii2-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ @@ -119,6 +125,7 @@ }; ospi0_pins_default: ospi0-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ @@ -135,20 +142,32 @@ }; vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ >; }; main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ >; }; }; +&main_gpio0 { + bootph-all; +}; + +&main_gpio1 { + bootph-all; +}; + &main_i2c1 { + bootph-all; exp1: gpio@22 { + bootph-all; compatible = "ti,tca6424"; reg = <0x22>; gpio-controller; @@ -207,12 +226,18 @@ }; }; +&fss { + bootph-all; +}; + &ospi0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; flash@0 { + bootph-all; compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -225,6 +250,7 @@ cdns,read-delay = <4>; partitions { + bootph-all; compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -260,6 +286,7 @@ }; partition@3fc0000 { + bootph-pre-ram; label = "ospi.phypattern"; reg = <0x3fc0000 0x40000>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index de36abb243..ccd708b09a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -816,4 +816,64 @@ clock-names = "fck"; status = "disabled"; }; + + mcasp0: audio-controller@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 190 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 190 0>; + assigned-clock-parents = <&k3_clks 190 2>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: audio-controller@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 191 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 191 0>; + assigned-clock-parents = <&k3_clks 191 2>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: audio-controller@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 192 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 192 0>; + assigned-clock-parents = <&k3_clks 192 2>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 99f2878de4..8f64ac2c75 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -79,10 +79,10 @@ regulator-boot-on; }; - vcc_3v3_sys: regulator-2 { + vcc_3v3_main: regulator-2 { /* output of LM5141-Q1 */ compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_sys"; + regulator-name = "vcc_3v3_main"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vmain_pd>; @@ -101,6 +101,17 @@ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; + vcc_3v3_sys: regulator-4 { + /* output of TPS222965DSGT */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_main>; + regulator-always-on; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -114,6 +125,41 @@ default-state = "off"; }; }; + + tlv320_mclk: clk-0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12288000>; + }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM62Ax-SKEVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&tlv320_mclk>; + }; + }; }; &mcu_pmx0 { @@ -219,6 +265,29 @@ AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ >; }; + + main_mcasp1_pins_default: main-mcasp1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */ + AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */ + AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */ + AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */ + >; + }; +}; + +&mcu_pmx0 { + status = "okay"; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ + >; + }; +}; + +&mcu_gpio0 { + status = "okay"; }; &main_i2c0 { @@ -244,6 +313,87 @@ }; }; }; + + tps659312: pmic@48 { + compatible = "ti,tps6593-q1"; + reg = <0x48>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&mcu_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + buck123-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + buck5-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&buck5>; + ldo4-supply = <&vcc_3v3_sys>; + + regulators { + buck123: buck123 { + regulator-name = "vcc_core"; + regulator-min-microvolt = <715000>; + regulator-max-microvolt = <895000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "vcc_1v8_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vddshv5_sdio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "vpp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vcc_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &main_i2c1 { @@ -271,6 +421,19 @@ "MCASP1_FET_SEL", "UART1_FET_SEL", "PD_I2C_IRQ", "IO_EXP_TEST_LED"; }; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + + /* Regulators */ + AVDD-supply = <&vcc_3v3_sys>; + IOVDD-supply = <&vcc_3v3_sys>; + DRVDD-supply = <&vcc_3v3_sys>; + DVDD-supply = <&buck5>; + }; }; &sdhci1 { @@ -361,3 +524,23 @@ ti,min-output-impedance; }; }; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index c24ff90543..963758c7d3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -40,18 +40,37 @@ }; }; + main_conf: bus@100000 { + compatible = "simple-bus"; + reg = <0x00 0x00100000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x20000>; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; + + epwm_tbclk: clock-controller@4130 { + compatible = "ti,am62-epwm-tbclk"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; + }; + dmss: bus@48000000 { - bootph-all; - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; dma-ranges; ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; + bootph-all; ti,sci-dev-id = <25>; secure_proxy_main: mailbox@4d000000 { - bootph-all; compatible = "ti,am654-secure-proxy"; #mbox-cells = <1>; reg-names = "target_data", "rt", "scfg"; @@ -60,11 +79,76 @@ <0x00 0x4a400000 0x00 0x80000>; interrupt-names = "rx_012"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + bootph-all; + }; + + inta_main_dmss: interrupt-controller@48000000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x48000000 0x00 0x100000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <28>; + ti,interrupt-ranges = <5 69 35>; + ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; + }; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + reg = <0x00 0x485c0100 0x00 0x100>, + <0x00 0x4c000000 0x00 0x20000>, + <0x00 0x4a820000 0x00 0x20000>, + <0x00 0x4aa40000 0x00 0x20000>, + <0x00 0x4bc00000 0x00 0x100000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + bootph-all; + }; + + main_pktdma: dma-controller@485c0000 { + compatible = "ti,am64-dmss-pktdma"; + reg = <0x00 0x485c0000 0x00 0x100>, + <0x00 0x4a800000 0x00 0x20000>, + <0x00 0x4aa00000 0x00 0x40000>, + <0x00 0x4b800000 0x00 0x400000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <2>; + bootph-all; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <30>; + ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ + <0x24>, /* CPSW_TX_CHAN */ + <0x25>, /* SAUL_TX_0_CHAN */ + <0x26>; /* SAUL_TX_1_CHAN */ + ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ + <0x11>, /* RING_CPSW_TX_CHAN */ + <0x12>, /* RING_SAUL_TX_0_CHAN */ + <0x13>; /* RING_SAUL_TX_1_CHAN */ + ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ + <0x2b>, /* CPSW_RX_CHAN */ + <0x2d>, /* SAUL_RX_0_CHAN */ + <0x2f>, /* SAUL_RX_1_CHAN */ + <0x31>, /* SAUL_RX_2_CHAN */ + <0x33>; /* SAUL_RX_3_CHAN */ + ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ + <0x2c>, /* FLOW_CPSW_RX_CHAN */ + <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ + <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ }; }; dmsc: system-controller@44043000 { - bootph-all; compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; @@ -72,37 +156,72 @@ <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44043000 0x00 0xfe0>; + bootph-all; k3_pds: power-controller { - bootph-all; compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { - bootph-all; compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { - bootph-all; compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; - main_pmx0: pinctrl@f4000 { + crypto: crypto@40900000 { + compatible = "ti,am62-sa3ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + + dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, + <&main_pktdma 0x7507 0>; + dma-names = "tx", "rx1", "rx2"; + }; + + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; bootph-all; + }; + + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; + bootph-all; + }; + + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; + bootph-pre-ram; }; main_timer0: timer@2400000 { - bootph-all; compatible = "ti,am654-timer"; reg = <0x00 0x2400000 0x00 0x400>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -112,6 +231,91 @@ assigned-clock-parents = <&k3_clks 36 3>; power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; ti,timer-pwm; + bootph-all; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 37 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 2>; + assigned-clock-parents = <&k3_clks 37 3>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 38 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 2>; + assigned-clock-parents = <&k3_clks 38 3>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 39 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 2>; + assigned-clock-parents = <&k3_clks 39 3>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 40 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 2>; + assigned-clock-parents = <&k3_clks 40 3>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 41 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 2>; + assigned-clock-parents = <&k3_clks 41 3>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 42 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 2>; + assigned-clock-parents = <&k3_clks 42 3>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 43 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 2>; + assigned-clock-parents = <&k3_clks 43 3>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; }; main_uart0: serial@2800000 { @@ -133,4 +337,548 @@ clock-names = "fclk"; status = "disabled"; }; + + main_uart2: serial@2820000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 154 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 155 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 156 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 158 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_i2c0: i2c@20000000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20000000 0x00 0x100>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c1: i2c@20010000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20010000 0x00 0x100>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c2: i2c@20020000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20020000 0x00 0x100>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_i2c3: i2c@20030000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20030000 0x00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + status = "disabled"; + }; + + main_spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 141 0>; + status = "disabled"; + }; + + main_spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 142 0>; + status = "disabled"; + }; + + main_spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 143 0>; + status = "disabled"; + }; + + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <3>; + ti,interrupt-ranges = <0 32 16>; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <190>, <191>, <192>, + <193>, <194>, <195>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <92>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 77 0>; + clock-names = "gpio"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00601000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <180>, <181>, <182>, + <183>, <184>, <185>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <52>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 78 0>; + clock-names = "gpio"; + }; + + sdhci0: mmc@fa10000 { + compatible = "ti,am64-sdhci-8bit"; + reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 57 1>, <&k3_clks 57 2>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 57 2>; + assigned-clock-parents = <&k3_clks 57 4>; + ti,otap-del-sel-legacy = <0x0>; + status = "disabled"; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,otap-del-sel-legacy = <0x8>; + status = "disabled"; + }; + + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,otap-del-sel-legacy = <0x8>; + status = "disabled"; + }; + + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 75 7>; + assigned-clocks = <&k3_clks 75 7>; + assigned-clock-parents = <&k3_clks 75 8>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0x08000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 3>; + assigned-clock-parents = <&k3_clks 13 11>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_pktdma 0xc600 15>, + <&main_pktdma 0xc601 15>, + <&main_pktdma 0xc602 15>, + <&main_pktdma 0xc603 15>, + <&main_pktdma 0xc604 15>, + <&main_pktdma 0xc605 15>, + <&main_pktdma 0xc606 15>, + <&main_pktdma 0xc607 15>, + <&main_pktdma 0x4600 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 00 00 00 00]; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 00 00 00 00 00]; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 13 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + hwspinlock: spinlock@2a000000 { + compatible = "ti,am64-hwspinlock"; + reg = <0x00 0x2a000000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@29000000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29000000 0x00 0x200>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster1: mailbox@29010000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29010000 0x00 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster2: mailbox@29020000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29020000 0x00 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster3: mailbox@29030000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29030000 0x00 0x200>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + status = "disabled"; + }; + + main_mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_mcan1: can@20711000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20711000 0x00 0x200>, + <0x00 0x20718000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 99 6>, <&k3_clks 99 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti15: watchdog@e0f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e0f0000 0x00 0x100>; + clocks = <&k3_clks 130 0>; + power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 130 0>; + assigned-clock-parents = <&k3_clks 130 2>; + }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + mcasp0: audio-controller@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 190 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 190 0>; + assigned-clock-parents = <&k3_clks 190 2>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: audio-controller@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 191 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 191 0>; + assigned-clock-parents = <&k3_clks 191 2>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: audio-controller@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 192 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 192 0>; + assigned-clock-parents = <&k3_clks 192 2>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi index 27ca1c9c6d..c4b0b91d70 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi @@ -11,5 +11,195 @@ #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; + bootph-all; + }; + + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x4100000 0x00 0x1000>; + ti,esm-pins = <0>, <1>, <2>, <85>; + status = "reserved"; + bootph-pre-ram; + }; + + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@4800000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4800000 0x00 0x400>; + clocks = <&k3_clks 35 2>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@4810000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4810000 0x00 0x400>; + clocks = <&k3_clks 48 2>; + clock-names = "fck"; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@4820000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4820000 0x00 0x400>; + clocks = <&k3_clks 49 2>; + clock-names = "fck"; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@4830000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4830000 0x00 0x400>; + clocks = <&k3_clks 50 2>; + clock-names = "fck"; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_uart0: serial@4a00000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x04a00000 0x00 0x100>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + mcu_i2c0: i2c@4900000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x04900000 0x00 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 106 2>; + clock-names = "fck"; + status = "disabled"; + }; + + mcu_spi0: spi@4b00000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x04b00000 0x00 0x400>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 147 0>; + status = "disabled"; + }; + + mcu_spi1: spi@4b10000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x04b10000 0x00 0x400>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 148 0>; + status = "disabled"; + }; + + mcu_gpio_intr: interrupt-controller@4210000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <5>; + ti,interrupt-ranges = <0 104 4>; + }; + + mcu_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x4201000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&mcu_gpio_intr>; + interrupts = <30>, <31>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <24>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 79 0>; + clock-names = "gpio"; + }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + /* Tightly coupled to M4F */ + status = "reserved"; + }; + + mcu_mcan0: can@4e08000 { + compatible = "bosch,m_can"; + reg = <0x00 0x4e08000 0x00 0x200>, + <0x00 0x4e00000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 188 6>, <&k3_clks 188 1>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + status = "disabled"; + }; + + mcu_mcan1: can@4e18000 { + compatible = "bosch,m_can"; + reg = <0x00 0x4e18000 0x00 0x200>, + <0x00 0x4e10000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 189 6>, <&k3_clks 189 1>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + status = "disabled"; + }; + + mcu_r5fss0: r5fss@79000000 { + compatible = "ti,am62-r5fss"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x79000000 0x00 0x79000000 0x8000>, + <0x79020000 0x00 0x79020000 0x8000>; + power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>; + mcu_r5fss0_core0: r5f@79000000 { + compatible = "ti,am62-r5f"; + reg = <0x79000000 0x00008000>, + <0x79020000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <9>; + ti,sci-proc-ids = <0x03 0xff>; + resets = <&k3_reset 9 1>; + firmware-name = "am62p-mcu-r5f0_0-fw"; + ti,atcm-enable = <0>; + ti,btcm-enable = <1>; + ti,loczrama = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi new file mode 100644 index 0000000000..85ce545633 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi index aaf4b793b5..19f42b3939 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi @@ -6,17 +6,17 @@ &cbass_wakeup { wkup_conf: bus@43000000 { - bootph-all; compatible = "simple-bus"; reg = <0x00 0x43000000 0x00 0x20000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x43000000 0x20000>; + bootph-all; chipid: chipid@14 { - bootph-all; compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; }; @@ -29,4 +29,69 @@ clock-names = "fclk"; status = "disabled"; }; + + wkup_i2c0: i2c@2b200000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2b200000 0x00 0x100>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 4>; + clock-names = "fck"; + status = "disabled"; + }; + + wkup_rtc0: rtc@2b1f0000 { + compatible = "ti,am62-rtc"; + reg = <0x00 0x2b1f0000 0x00 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; + clock-names = "vbus", "osc32k"; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + wakeup-source; + }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* Used by DM firmware */ + status = "reserved"; + }; + + wkup_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + wkup_r5fss0: r5fss@78000000 { + compatible = "ti,am62-r5fss"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x78000000 0x00 0x78000000 0x8000>, + <0x78100000 0x00 0x78100000 0x8000>; + power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + + wkup_r5fss0_core0: r5f@78000000 { + compatible = "ti,am62-r5f"; + reg = <0x78000000 0x00008000>, + <0x78100000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <121>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 121 1>; + firmware-name = "am62-wkup-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi index 294ab73ec9..84ffe7b9dc 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi @@ -45,10 +45,10 @@ }; cbass_main: bus@f0000 { - bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; + bootph-all; ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ @@ -100,10 +100,10 @@ <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */ <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */ + bootph-all; }; cbass_wakeup: bus@b00000 { - bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -112,8 +112,11 @@ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */ <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/ <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ + bootph-all; }; }; + + #include "k3-am62p-thermal.dtsi" }; /* Now include peripherals for each bus segment */ diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 6fb17b17c9..f377eadef0 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -8,6 +8,9 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> #include "k3-am62p5.dtsi" / { @@ -18,6 +21,12 @@ serial0 = &wkup_uart0; serial2 = &main_uart0; serial3 = &main_uart1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + spi0 = &ospi0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; chosen { @@ -29,6 +38,7 @@ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000001 0x80000000>; device_type = "memory"; + bootph-pre-ram; }; reserved-memory { @@ -52,35 +62,511 @@ no-map; }; }; + + vmain_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_5v0: regulator-1 { + /* Output of TPS630702RNMR */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_mmc1: regulator-2 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vddshv_sdio: regulator-3 { + compatible = "regulator-gpio"; + regulator-name = "vddshv_sdio"; + pinctrl-names = "default"; + pinctrl-0 = <&vddshv_sdio_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + bootph-all; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62-sk:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; + + tlv320_mclk: clk-0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12288000>; + }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM62x-SKEVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&tlv320_mclk>; + }; + }; +}; + +&main_gpio0 { + bootph-all; +}; + +&main_gpio1 { + bootph-all; }; &main_pmx0 { - main_uart0_pins_default: main-uart0-default-pins { + bootph-all; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */ + AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */ + AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */ + >; bootph-all; + }; + + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */ + AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C22) UART0_RTSn.GPIO1_23 */ + >; + }; + + main_mcasp1_pins_default: main-mcasp1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ + AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */ + AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */ + AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */ + >; + }; + + main_mdio1_pins_default: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */ + AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */ + AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */ + AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */ + AM62PX_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H23) MMC1_DAT1 */ + AM62PX_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (H22) MMC1_DAT2 */ + AM62PX_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */ + >; + bootph-all; + }; + + main_mmc2_pins_default: main-mmc2-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0120, PIN_INPUT, 0) /* (K24) MMC2_CMD */ + AM62PX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (K21) MMC2_CLK */ + AM62PX_IOPAD(0x011C, PIN_INPUT, 0) /* () MMC2_CLKLB */ + AM62PX_IOPAD(0x0114, PIN_INPUT, 0) /* (K23) MMC2_DAT0 */ + AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */ + AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */ + AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */ + >; + bootph-all; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */ + AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */ + AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */ + AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */ + AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */ + AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */ + AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */ + AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */ + AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */ + AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */ + AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */ + AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */ + >; + bootph-all; + }; + + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */ + AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */ + AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */ + AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */ + AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */ + AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */ + AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */ + AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */ + AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */ + AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */ + AM62PX_IOPAD(0x0168, PIN_INPUT, 0) /* (D16) RGMII2_TXC */ + AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ - AM62PX_IOPAD(0x1d0, PIN_INPUT, 0) /* (A23) UART0_CTSn */ - AM62PX_IOPAD(0x1d4, PIN_OUTPUT, 0) /* (C22) UART0_RTSn */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3.UART1_CTSn */ + AM62PX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2.UART1_RTSn */ + AM62PX_IOPAD(0x01ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR.UART1_RXD */ + AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */ + >; bootph-all; + }; + + main_wlirq_pins_default: main-wlirq-default-pins { pinctrl-single,pins = < - AM62PX_IOPAD(0x194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3 */ - AM62PX_IOPAD(0x198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2 */ - AM62PX_IOPAD(0x1ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR */ - AM62PX_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR */ + AM62PX_IOPAD(0x0128, PIN_INPUT, 7) /* (K25) MMC2_SDWP.GPIO0_72 */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK */ + AM62PX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */ + AM62PX_IOPAD(0x000c, PIN_INPUT, 0) /* (L25) OSPI0_D0 */ + AM62PX_IOPAD(0x0010, PIN_INPUT, 0) /* (N24) OSPI0_D1 */ + AM62PX_IOPAD(0x0014, PIN_INPUT, 0) /* (N25) OSPI0_D2 */ + AM62PX_IOPAD(0x0018, PIN_INPUT, 0) /* (M24) OSPI0_D3 */ + AM62PX_IOPAD(0x001c, PIN_INPUT, 0) /* (N21) OSPI0_D4 */ + AM62PX_IOPAD(0x0020, PIN_INPUT, 0) /* (N22) OSPI0_D5 */ + AM62PX_IOPAD(0x0024, PIN_INPUT, 0) /* (P21) OSPI0_D6 */ + AM62PX_IOPAD(0x0028, PIN_INPUT, 0) /* (N20) OSPI0_D7 */ + AM62PX_IOPAD(0x0008, PIN_INPUT, 0) /* (P22) OSPI0_DQS */ + >; + bootph-all; + }; + + usr_led_pins_default: usr-led-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0244, PIN_INPUT, 7) /* (D24) MMC1_SDWP.GPIO1_49 */ + >; + }; + + vddshv_sdio_pins_default: vddshvr-sdio-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x007c, PIN_INPUT, 7) /* (Y25) GPMC0_CLK.GPIO0_31 */ + >; + bootph-all; + }; + + wlan_en_pins_default: wlan-en-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0124, PIN_INPUT, 7) /* (J25) MMC2_SDCD.GPIO0_71 */ >; }; }; -&main_uart0 { +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <100000>; + bootph-all; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + }; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "OLDI_INT#", "x8_NAND_DETECT", + "UART1_FET_SEL", "MMC1_SD_EN", + "VPP_EN", "EXP_PS_3V3_EN", + "UART1_FET_BUF_EN", "EXP_HAT_DETECT", + "DSI_GPIO0", "DSI_GPIO1", + "OLDI_EDID", "BT_UART_WAKE_SOC_3V3", + "USB_TYPEA_OC_INDICATION", "CSI_GPIO0", + "CSI_GPIO1", "WLAN_ALERTn", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "DSI_EDID", + "PD_I2C_IRQ", "IO_EXP_TEST_LED"; + + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; + }; + + exp2: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_EN_SOC", "EXP_PS_5V0_EN", + "", "", + "", "", + "", "", + "WL_LT_EN", "", + "TP3", "TP6", + "TP4", "TP7", + "TP5", "TP8", + "SoC_I2C2_MCAN_SEL", "GPIO_HDMI_RSTn", + "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "GPIO_OLDI_RSTn", "GPIO_AUD_RSTn", + "GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST"; + }; +}; + +&main_i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; +}; + +&sdhci0 { + status = "okay"; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&sdhci1 { + /* SD/MMC */ + status = "okay"; + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vddshv_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; + bootph-all; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>, + <&main_rgmii2_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&fss { bootph-all; +}; + +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + bootph-all; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + bootph-all; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + bootph-all; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x00 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + bootph-all; + }; + }; + }; +}; + +&mailbox0_cluster0 { + mbox_r5_0: mbox-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster1 { + mbox_mcu_r5_0: mbox-mcu-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; status = "okay"; + bootph-all; }; &main_uart1 { @@ -88,29 +574,27 @@ pinctrl-0 = <&main_uart1_pins_default>; /* Main UART1 is used by TIFS firmware */ status = "reserved"; -}; - -&cbass_mcu { bootph-all; }; &mcu_pmx0 { bootph-all; + wkup_uart0_pins_default: wkup-uart0-default-pins { - bootph-all; pinctrl-single,pins = < AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ >; + bootph-all; }; }; &wkup_uart0 { /* WKUP UART0 is used by DM firmware */ - bootph-all; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; status = "reserved"; + bootph-all; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 677ff8de4b..19f57ead4e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -28,6 +28,7 @@ }; memory@80000000 { + bootph-pre-ram; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; @@ -130,6 +131,7 @@ &main_pmx0 { /* First pad number is ALW package and second is AMC package */ main_uart0_pins_default: main-uart0-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ @@ -137,6 +139,7 @@ }; main_uart1_pins_default: main-uart1-default-pins { + bootph-pre-ram; pinctrl-single,pins = < AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */ AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */ @@ -167,6 +170,7 @@ }; main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ @@ -182,6 +186,7 @@ }; main_mmc1_pins_default: main-mmc1-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ @@ -207,6 +212,7 @@ }; main_rgmii1_pins_default: main-rgmii1-default-pins { + bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */ AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */ @@ -274,6 +280,7 @@ &mcu_pmx0 { wkup_uart0_pins_default: wkup-uart0-default-pins { + bootph-pre-ram; pinctrl-single,pins = < AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */ AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */ @@ -285,12 +292,14 @@ &wkup_uart0 { /* WKUP UART0 is used by DM firmware */ + bootph-pre-ram; status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; }; &main_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; @@ -298,6 +307,7 @@ &main_uart1 { /* Main UART1 is used by TIFS firmware */ + bootph-pre-ram; status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; @@ -390,6 +400,7 @@ }; &sdhci0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; @@ -399,6 +410,7 @@ &sdhci1 { /* SD/MMC */ + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; @@ -407,21 +419,25 @@ }; &cpsw3g { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&main_rgmii1_pins_default>; }; &cpsw_port1 { + bootph-all; phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; }; &cpsw3g_mdio { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mdio1_pins_default>; cpsw3g_phy0: ethernet-phy@0 { + bootph-all; reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 0df54a7418..0be642bc1b 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -38,6 +38,7 @@ }; main_conf: syscon@43000000 { + bootph-all; compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; reg = <0x0 0x43000000 0x0 0x20000>; #address-cells = <1>; @@ -45,6 +46,7 @@ ranges = <0x0 0x0 0x43000000 0x20000>; chipid@14 { + bootph-all; compatible = "ti,am654-chipid"; reg = <0x00000014 0x4>; }; @@ -96,7 +98,8 @@ }; dmss: bus@48000000 { - compatible = "simple-mfd"; + bootph-all; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; dma-ranges; @@ -105,6 +108,7 @@ ti,sci-dev-id = <25>; secure_proxy_main: mailbox@4d000000 { + bootph-all; compatible = "ti,am654-secure-proxy"; #mbox-cells = <1>; reg-names = "target_data", "rt", "scfg"; @@ -188,6 +192,7 @@ }; dmsc: system-controller@44043000 { + bootph-all; compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; @@ -197,22 +202,26 @@ reg = <0x00 0x44043000 0x00 0xfe0>; k3_pds: power-controller { + bootph-all; compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; }; k3_clks: clock-controller { + bootph-all; compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; k3_reset: reset-controller { + bootph-all; compatible = "ti,sci-reset"; #reset-cells = <2>; }; }; main_pmx0: pinctrl@f4000 { + bootph-all; compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2d0>; #pinctrl-cells = <1>; @@ -221,6 +230,7 @@ }; main_timer0: timer@2400000 { + bootph-all; compatible = "ti,am654-timer"; reg = <0x00 0x2400000 0x00 0x400>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -365,6 +375,7 @@ }; main_esm: esm@420000 { + bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x420000 0x00 0x1000>; ti,esm-pins = <160>, <161>; @@ -1158,21 +1169,21 @@ }; main_rti0: watchdog@e000000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0xe000000 0x00 0x100>; - clocks = <&k3_clks 125 0>; - power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 125 0>; - assigned-clock-parents = <&k3_clks 125 2>; + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0xe000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; }; main_rti1: watchdog@e010000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0xe010000 0x00 0x100>; - clocks = <&k3_clks 126 0>; - power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 126 0>; - assigned-clock-parents = <&k3_clks 126 2>; + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0xe010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; }; icssg0: icssg@30000000 { diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 686d497907..b9508072be 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -146,6 +146,7 @@ }; mcu_pmx0: pinctrl@4084000 { + bootph-all; compatible = "pinctrl-single"; reg = <0x00 0x4084000 0x00 0x84>; #pinctrl-cells = <1>; @@ -154,6 +155,7 @@ }; mcu_esm: esm@4100000 { + bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x4100000 0x00 0x1000>; ti,esm-pins = <0>, <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index 1c2c8f0dac..f87f09d83c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -126,6 +126,12 @@ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ >; }; + + rtc_pins_default: rtc-defaults-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* (C19) EXTINTn.GPIO1_70 */ + >; + }; }; &cpsw3g { @@ -177,6 +183,11 @@ i2c_som_rtc: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_pins_default>; + interrupt-parent = <&main_gpio1>; + interrupts = <70 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 8e9c2bc70f..0187c42aed 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -47,6 +47,7 @@ }; cbass_main: bus@f4000 { + bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -85,6 +86,7 @@ <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; cbass_mcu: bus@4000000 { + bootph-all; compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index b4a1f73d4f..4dba189410 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -35,6 +35,7 @@ }; memory@80000000 { + bootph-all; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; @@ -108,6 +109,7 @@ evm_12v0: regulator-0 { /* main DC jack */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "evm_12v0"; regulator-min-microvolt = <12000000>; @@ -129,6 +131,7 @@ vsys_3v3: regulator-2 { /* output of LM5140 */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vsys_3v3"; regulator-min-microvolt = <3300000>; @@ -140,6 +143,7 @@ vdd_mmc1: regulator-3 { /* TPS2051BD */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; @@ -161,6 +165,7 @@ }; vtt_supply: regulator-5 { + bootph-all; compatible = "regulator-fixed"; regulator-name = "vtt"; pinctrl-names = "default"; @@ -251,6 +256,7 @@ }; main_uart0_pins_default: main-uart0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -269,6 +275,7 @@ }; main_i2c0_pins_default: main-i2c0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ @@ -276,6 +283,7 @@ }; main_i2c1_pins_default: main-i2c1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ @@ -283,6 +291,7 @@ }; mdio1_pins_default: mdio1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ @@ -290,6 +299,7 @@ }; rgmii1_pins_default: rgmii1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ @@ -307,6 +317,7 @@ }; rgmii2_pins_default: rgmii2-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -324,6 +335,7 @@ }; main_usb0_pins_default: main-usb0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; @@ -366,6 +378,7 @@ }; ddr_vtt_pins_default: ddr-vtt-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ >; @@ -373,6 +386,7 @@ }; &main_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; @@ -387,11 +401,21 @@ }; &main_i2c0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + gpio@38 { + /* TCA9554 */ + compatible = "nxp,pca9554"; + reg = <0x38>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSE_DETECT"; + }; + eeprom@50 { /* AT24CM01 */ compatible = "atmel,24c1024"; @@ -400,12 +424,14 @@ }; &main_i2c1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; exp1: gpio@22 { + bootph-all; compatible = "ti,tca6424"; reg = <0x22>; gpio-controller; @@ -438,6 +464,10 @@ }; }; +&main_gpio0 { + bootph-all; +}; + /* mcu_gpio0 is reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; @@ -467,6 +497,7 @@ &sdhci1 { /* SD/MMC */ + bootph-all; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>; @@ -476,11 +507,13 @@ }; &usbss0 { + bootph-all; ti,vbus-divider; ti,usb2-only; }; &usb0 { + bootph-all; dr_mode = "otg"; maximum-speed = "high-speed"; pinctrl-names = "default"; @@ -488,11 +521,13 @@ }; &cpsw3g { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { + bootph-all; phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; }; @@ -503,11 +538,13 @@ }; &cpsw3g_mdio { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio1_pins_default>; cpsw3g_phy0: ethernet-phy@0 { + bootph-all; reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 722fd285a3..f29c8a9b59 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -34,6 +34,7 @@ }; memory@80000000 { + bootph-pre-ram; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; @@ -107,6 +108,7 @@ vusb_main: regulator-0 { /* USB MAIN INPUT 5V DC */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vusb_main5v0"; regulator-min-microvolt = <5000000>; @@ -117,6 +119,7 @@ vcc_3v3_sys: regulator-1 { /* output of LP8733xx */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; regulator-min-microvolt = <3300000>; @@ -128,6 +131,7 @@ vdd_mmc1: regulator-2 { /* TPS2051BD */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; @@ -234,6 +238,7 @@ &main_pmx0 { main_mmc1_pins_default: main-mmc1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ @@ -248,6 +253,7 @@ }; main_uart0_pins_default: main-uart0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -257,6 +263,7 @@ }; main_uart1_pins_default: main-uart1-default-pins { + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ @@ -266,12 +273,14 @@ }; main_usb0_pins_default: main-usb0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; main_i2c0_pins_default: main-i2c0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ @@ -279,6 +288,7 @@ }; main_i2c1_pins_default: main-i2c1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ @@ -367,6 +377,7 @@ }; &main_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; @@ -375,12 +386,14 @@ &main_uart1 { /* main_uart1 is reserved for firmware usage */ + bootph-pre-ram; status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; }; &main_i2c0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; @@ -393,12 +406,14 @@ }; &main_i2c1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; exp1: gpio@70 { + bootph-all; compatible = "nxp,pca9538"; reg = <0x70>; gpio-controller; @@ -445,6 +460,7 @@ &sdhci1 { /* SD/MMC */ + bootph-all; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>; @@ -454,11 +470,22 @@ }; &serdes_ln_ctrl { + bootph-all; idle-states = <AM64_SERDES0_LANE0_USB>; }; +&serdes_refclk { + bootph-all; +}; + +&serdes_wiz0 { + bootph-all; +}; + &serdes0 { + bootph-all; serdes0_usb_link: phy@0 { + bootph-all; reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>; @@ -468,10 +495,12 @@ }; &usbss0 { + bootph-all; ti,vbus-divider; }; &usb0 { + bootph-all; dr_mode = "host"; maximum-speed = "super-speed"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts index 04c15b64f0..d95d80076a 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/pwm/pwm.h> @@ -19,6 +20,7 @@ compatible = "tq,am642-tqma6442l-mbax4xxl", "tq,am642-tqma6442l", "ti,am642"; model = "TQ-Systems TQMa64xxL SoM on MBax4xxL carrier board"; + chassis-type = "embedded"; aliases { ethernet0 = &cpsw_port1; @@ -58,12 +60,14 @@ pinctrl-0 = <&mcu_gpio_leds_pins>; led-0 { - label = "led0"; gpios = <&mcu_gpio0 8 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; }; led-1 { - label = "led1"; gpios = <&mcu_gpio0 9 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_INDICATOR; }; }; @@ -170,7 +174,8 @@ &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = <&main_gpio1_hog_pins>; + pinctrl-0 = <&main_gpio1_hog_pins>, + <&main_gpio1_pru_pins>; gpio-line-names = "", "", "", "", /* 0-3 */ "", "", "", "", /* 4-7 */ @@ -545,6 +550,79 @@ >; }; + main_gpio1_pru_pins: main-gpio1-pru-pins { + pinctrl-single,pins = < + /* (Y1) PRG0_PRU0_GPO0.GPIO1_0 */ + AM64X_IOPAD(0x0160, PIN_INPUT, 7) + /* (R4) PRG0_PRU0_GPO1.GPIO1_1 */ + AM64X_IOPAD(0x0164, PIN_INPUT, 7) + /* (U2) PRG0_PRU0_GPO2.GPIO1_2 */ + AM64X_IOPAD(0x0168, PIN_INPUT, 7) + /* (V2) PRG0_PRU0_GPO3.GPIO1_3 */ + AM64X_IOPAD(0x016c, PIN_INPUT, 7) + /* (AA2) PRG0_PRU0_GPO4.GPIO1_4 */ + AM64X_IOPAD(0x0170, PIN_INPUT, 7) + /* (R3) PRG0_PRU0_GPO5.GPIO1_5 */ + AM64X_IOPAD(0x0174, PIN_INPUT, 7) + /* (T3) PRG0_PRU0_GPO6.GPIO1_6 */ + AM64X_IOPAD(0x0178, PIN_INPUT, 7) + /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ + AM64X_IOPAD(0x017c, PIN_INPUT, 7) + /* (T2) PRG0_PRU0_GPO8.GPIO1_8 */ + AM64X_IOPAD(0x0180, PIN_INPUT, 7) + /* (Y3) PRG0_PRU0_GPO11.GPIO1_11 */ + AM64X_IOPAD(0x018c, PIN_INPUT, 7) + /* (AA3) PRG0_PRU0_GPO12.GPIO1_12 */ + AM64X_IOPAD(0x0190, PIN_INPUT, 7) + /* (R6) PRG0_PRU0_GPO13.GPIO1_13 */ + AM64X_IOPAD(0x0194, PIN_INPUT, 7) + /* (V4) PRG0_PRU0_GPO14.GPIO1_14 */ + AM64X_IOPAD(0x0198, PIN_INPUT, 7) + /* (T5) PRG0_PRU0_GPO15.GPIO1_15 */ + AM64X_IOPAD(0x019c, PIN_INPUT, 7) + /* (U4) PRG0_PRU0_GPO16.GPIO1_16 */ + AM64X_IOPAD(0x01a0, PIN_INPUT, 7) + /* (U1) PRG0_PRU0_GPO17.GPIO1_17 */ + AM64X_IOPAD(0x01a4, PIN_INPUT, 7) + /* (V1) PRG0_PRU0_GPO18.GPIO1_18 */ + AM64X_IOPAD(0x01a8, PIN_INPUT, 7) + /* (W1) PRG0_PRU0_GPO19.GPIO1_19 */ + AM64X_IOPAD(0x01ac, PIN_INPUT, 7) + /* (Y2) PRG0_PRU1_GPO0.GPIO1_20 */ + AM64X_IOPAD(0x01b0, PIN_INPUT, 7) + /* (W2) PRG0_PRU1_GPO1.GPIO1_21 */ + AM64X_IOPAD(0x01b4, PIN_INPUT, 7) + /* (V3) PRG0_PRU1_GPO2.GPIO1_22 */ + AM64X_IOPAD(0x01b8, PIN_INPUT, 7) + /* (T4) PRG0_PRU1_GPO3.GPIO1_23 */ + AM64X_IOPAD(0x01bc, PIN_INPUT, 7) + /* (W3) PRG0_PRU1_GPO4.GPIO1_24 */ + AM64X_IOPAD(0x01c0, PIN_INPUT, 7) + /* (P4) PRG0_PRU1_GPO5.GPIO1_25 */ + AM64X_IOPAD(0x01c4, PIN_INPUT, 7) + /* (R5) PRG0_PRU1_GPO6.GPIO1_26 */ + AM64X_IOPAD(0x01c8, PIN_INPUT, 7) + /* (R1) PRG0_PRU1_GPO8.GPIO1_28 */ + AM64X_IOPAD(0x01d0, PIN_INPUT, 7) + /* (W4) PRG0_PRU1_GPO11.GPIO1_31 */ + AM64X_IOPAD(0x01dc, PIN_INPUT, 7) + /* (Y4) PRG0_PRU1_GPO12.GPIO1_32 */ + AM64X_IOPAD(0x01e0, PIN_INPUT, 7) + /* (T6) PRG0_PRU1_GPO13.GPIO1_33 */ + AM64X_IOPAD(0x01e4, PIN_INPUT, 7) + /* (U6) PRG0_PRU1_GPO14.GPIO1_34 */ + AM64X_IOPAD(0x01e8, PIN_INPUT, 7) + /* (U5) PRG0_PRU1_GPO15.GPIO1_35 */ + AM64X_IOPAD(0x01ec, PIN_INPUT, 7) + /* (AA4) PRG0_PRU1_GPO16.GPIO1_36 */ + AM64X_IOPAD(0x01f0, PIN_INPUT, 7) + /* (P2) PRG0_MDIO0_MDIO.GPIO1_40 */ + AM64X_IOPAD(0x0200, PIN_INPUT, 7) + /* (P3) PRG0_MDIO0_MDC.GPIO1_41 */ + AM64X_IOPAD(0x0204, PIN_INPUT, 7) + >; + }; + main_mcan0_pins: main-mcan0-pins { pinctrl-single,pins = < /* (B17) MCAN0_RX */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi index 6229849b5d..d82d4a9830 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi @@ -85,6 +85,15 @@ no-map; }; }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; }; &main_i2c0 { @@ -96,11 +105,13 @@ tmp1075: temperature-sensor@4a { compatible = "ti,tmp1075"; reg = <0x4a>; + vs-supply = <®_1v8>; }; eeprom0: eeprom@50 { compatible = "st,24c02", "atmel,24c02"; reg = <0x50>; + vcc-supply = <®_1v8>; pagesize = <16>; read-only; }; @@ -114,6 +125,7 @@ eeprom1: eeprom@54 { compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; + vcc-supply = <®_1v8>; pagesize = <32>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index c98068b6c1..29048d6577 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -600,7 +600,7 @@ }; main_navss: bus@30800000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>; @@ -1151,6 +1151,18 @@ }; }; + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; + + icssg0_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; + icssg0_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1293,6 +1305,18 @@ }; }; + icssg1_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg1_iepclk_mux>; + }; + + icssg1_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg1_iepclk_mux>; + }; + icssg1_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1435,6 +1459,18 @@ }; }; + icssg2_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg2_iepclk_mux>; + }; + + icssg2_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg2_iepclk_mux>; + }; + icssg2_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 1e536dc41f..edd5cfbec4 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -185,7 +185,7 @@ }; mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index f5c26e9fba..1637ec5ab5 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -369,6 +369,13 @@ ti,enable-vout-discharge; }; + gpio@38 { + compatible = "nxp,pca9554"; + reg = <0x38>; + gpio-controller; + #gpio-cells = <2>; + }; + pca9554: gpio@39 { compatible = "nxp,pca9554"; reg = <0x39>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso new file mode 100644 index 0000000000..ec8cf20ca3 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT overlay for IDK application board on AM654 EVM + * + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/icssg2-eth/ethernet-ports/port@0"; + ethernet2 = "/icssg2-eth/ethernet-ports/port@1"; + }; + + /* Ethernet node on PRU-ICSSG2 */ + icssg2_eth: icssg2-eth { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_rgmii_pins_default>; + sram = <&msmc_ram>; + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg2_mii_g_rt>; + ti,mii-rt = <&icssg2_mii_rt>; + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; + + interrupt-parent = <&icssg2_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_udmap 0xc300>, /* egress slice 0 */ + <&main_udmap 0xc301>, /* egress slice 0 */ + <&main_udmap 0xc302>, /* egress slice 0 */ + <&main_udmap 0xc303>, /* egress slice 0 */ + <&main_udmap 0xc304>, /* egress slice 1 */ + <&main_udmap 0xc305>, /* egress slice 1 */ + <&main_udmap 0xc306>, /* egress slice 1 */ + <&main_udmap 0xc307>, /* egress slice 1 */ + <&main_udmap 0x4300>, /* ingress slice 0 */ + <&main_udmap 0x4301>; /* ingress slice 1 */ + + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg2_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg2_phy0>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4120>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + icssg2_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg2_phy1>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4124>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; +}; + +&main_pmx0 { + + icssg2_mdio_pins_default: icssg2-mdio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */ + AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */ + >; + }; + + icssg2_rgmii_pins_default: icssg2-rgmii-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */ + AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */ + AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */ + AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */ + AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */ + AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */ + AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */ + AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */ + AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */ + AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */ + AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */ + AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */ + + AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */ + AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */ + AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */ + AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */ + AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */ + AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */ + AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */ + AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */ + AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */ + AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */ + AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */ + AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */ + >; + }; +}; + +&icssg2_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_mdio_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + + icssg2_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + + icssg2_phy1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso new file mode 100644 index 0000000000..150428dfce --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT overlay for IDK application board on AM654 EVM + * + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet3 = "/icssg0-eth/ethernet-ports/port@0"; + ethernet4 = "/icssg0-eth/ethernet-ports/port@1"; + ethernet5 = "/icssg1-eth/ethernet-ports/port@0"; + ethernet6 = "/icssg1-eth/ethernet-ports/port@1"; + }; + + /* Ethernet node on PRU-ICSSG0 */ + icssg0_eth: icssg0-eth { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_rgmii_pins_default>; + sram = <&msmc_ram>; + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg0_mii_g_rt>; + ti,mii-rt = <&icssg0_mii_rt>; + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; + + interrupt-parent = <&icssg0_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_udmap 0xc100>, /* egress slice 0 */ + <&main_udmap 0xc101>, /* egress slice 0 */ + <&main_udmap 0xc102>, /* egress slice 0 */ + <&main_udmap 0xc103>, /* egress slice 0 */ + <&main_udmap 0xc104>, /* egress slice 1 */ + <&main_udmap 0xc105>, /* egress slice 1 */ + <&main_udmap 0xc106>, /* egress slice 1 */ + <&main_udmap 0xc107>, /* egress slice 1 */ + + <&main_udmap 0x4100>, /* ingress slice 0 */ + <&main_udmap 0x4101>, /* ingress slice 1 */ + <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */ + <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg0_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg0_phy0>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4100>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + icssg0_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg0_phy1>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4104>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + + /* Ethernet node on PRU-ICSSG1 */ + icssg1_eth: icssg1-eth { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg1_rgmii_pins_default>; + sram = <&msmc_ram>; + ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg1_mii_g_rt>; + ti,mii-rt = <&icssg1_mii_rt>; + ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; + + interrupt-parent = <&icssg1_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_udmap 0xc200>, /* egress slice 0 */ + <&main_udmap 0xc201>, /* egress slice 0 */ + <&main_udmap 0xc202>, /* egress slice 0 */ + <&main_udmap 0xc203>, /* egress slice 0 */ + <&main_udmap 0xc204>, /* egress slice 1 */ + <&main_udmap 0xc205>, /* egress slice 1 */ + <&main_udmap 0xc206>, /* egress slice 1 */ + <&main_udmap 0xc207>, /* egress slice 1 */ + + <&main_udmap 0x4200>, /* ingress slice 0 */ + <&main_udmap 0x4201>, /* ingress slice 1 */ + <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */ + <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg1_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg1_phy0>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4110>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + icssg1_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg1_phy1>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4114>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; +}; + +&main_pmx0 { + + icssg0_mdio_pins_default: icssg0-mdio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */ + AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */ + >; + }; + + icssg0_rgmii_pins_default: icssg0-rgmii-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ + AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ + AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ + AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ + AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */ + AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */ + AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */ + AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */ + AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ + AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */ + AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ + AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ + + AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ + AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ + AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ + AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ + AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */ + AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */ + AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */ + AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */ + AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ + AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */ + AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ + AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ + >; + }; + + icssg0_iep0_pins_default: icssg0-iep0-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0240, PIN_INPUT, 2) /* (U24) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */ + >; + }; + + icssg1_mdio_pins_default: icssg1-mdio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0180, PIN_INPUT, 0) /* (AD18) PRG1_MDIO0_MDIO */ + AM65X_IOPAD(0x0184, PIN_OUTPUT, 0) /* (AH18) PRG1_MDIO0_MDC */ + >; + }; + + icssg1_rgmii_pins_default: icssg1-rgmii-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0130, PIN_INPUT, 2) /* (AH24) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */ + AM65X_IOPAD(0x0134, PIN_INPUT, 2) /* (AH23) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */ + AM65X_IOPAD(0x0138, PIN_INPUT, 2) /* (AG21) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */ + AM65X_IOPAD(0x013c, PIN_INPUT, 2) /* (AH22) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */ + AM65X_IOPAD(0x0160, PIN_OUTPUT, 2) /* (AE20) PRG1_PRU1_GPO12.PRG1_RGMII2_TD0 */ + AM65X_IOPAD(0x0164, PIN_OUTPUT, 2) /* (AF19) PRG1_PRU1_GPO13.PRG1_RGMII2_TD1 */ + AM65X_IOPAD(0x0168, PIN_OUTPUT, 2) /* (AH19) PRG1_PRU1_GPO14.PRG1_RGMII2_TD2 */ + AM65X_IOPAD(0x016c, PIN_OUTPUT, 2) /* (AG19) PRG1_PRU1_GPO15.PRG1_RGMII2_TD3 */ + AM65X_IOPAD(0x0170, PIN_INPUT, 2) /* (AE19) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */ + AM65X_IOPAD(0x015c, PIN_OUTPUT, 2) /* (AC20) PRG1_PRU1_GPO11.PRG1_RGMII2_TX_CTL */ + AM65X_IOPAD(0x0148, PIN_INPUT, 2) /* (AG22) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */ + AM65X_IOPAD(0x0140, PIN_INPUT, 2) /* (AE21) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */ + + AM65X_IOPAD(0x00e0, PIN_INPUT, 2) /* (AE22) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */ + AM65X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AG24) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */ + AM65X_IOPAD(0x00e8, PIN_INPUT, 2) /* (AF23) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */ + AM65X_IOPAD(0x00ec, PIN_INPUT, 2) /* (AD21) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */ + AM65X_IOPAD(0x0110, PIN_OUTPUT, 2) /* (AH20) PRG1_PRU0_GPO12.PRG1_RGMII1_TD0 */ + AM65X_IOPAD(0x0114, PIN_OUTPUT, 2) /* (AH21) PRG1_PRU0_GPO13.PRG1_RGMII1_TD1 */ + AM65X_IOPAD(0x0118, PIN_OUTPUT, 2) /* (AG20) PRG1_PRU0_GPO14.PRG1_RGMII1_TD2 */ + AM65X_IOPAD(0x011c, PIN_OUTPUT, 2) /* (AD19) PRG1_PRU0_GPO15.PRG1_RGMII1_TD3 */ + AM65X_IOPAD(0x0120, PIN_INPUT, 2) /* (AD20) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */ + AM65X_IOPAD(0x010c, PIN_OUTPUT, 2) /* (AF21) PRG1_PRU0_GPO11.PRG1_RGMII1_TX_CTL */ + AM65X_IOPAD(0x00f8, PIN_INPUT, 2) /* (AF22) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */ + AM65X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AG23) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */ + >; + }; + + icssg1_iep0_pins_default: icssg1-iep0-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */ + >; + }; +}; + +&icssg0_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_mdio_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + + icssg0_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + + icssg0_phy1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&icssg0_iep0 { + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_iep0_pins_default>; +}; + +&icssg1_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg1_mdio_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + + icssg1_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + + icssg1_phy1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&icssg1_iep0 { + pinctrl-names = "default"; + pinctrl-0 = <&icssg1_iep0_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 5df5946687..1e1a82f9d2 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -553,3 +553,59 @@ }; }; }; + +&serdes_ln_ctrl { + idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_PCIE1_LANE1>, + <J721S2_SERDES0_LANE2_USB_SWAP>, <J721S2_SERDES0_LANE3_USB>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + }; + + serdes0_usb_link: phy@2 { + status = "okay"; + reg = <2>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 3>; + }; +}; + +&pcie1_rc { + status = "okay"; + reset-gpios = <&exp1 10 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES lane 2 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi index 6c9139f732..20861a0a46 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -25,6 +25,108 @@ reg = <0x00 0x9e800000 0x00 0x01800000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a8000000 { + reg = <0x00 0xa8000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; }; }; @@ -49,3 +151,109 @@ reg = <0x51>; }; }; + +&mailbox0_cluster0 { + status = "okay"; + interrupts = <436>; + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + interrupts = <432>; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + interrupts = <428>; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + interrupts = <420>; + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&c71_0 { + status = "okay"; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; + +&c71_1 { + status = "okay"; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 0699370911..9868c7049b 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -47,6 +47,150 @@ reg = <0x00 0x9e800000 0x00 0x01800000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core0_memory_region: r5f-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core1_memory_region: r5f-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a9000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a9100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9100000 0x00 0xf00000>; + no-map; + }; + + c71_2_dma_memory_region: c71-dma-memory@aa000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa000000 0x00 0x100000>; + no-map; + }; + + c71_2_memory_region: c71-memory@aa100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa100000 0x00 0xf00000>; + no-map; + }; + + c71_3_dma_memory_region: c71-dma-memory@ab000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab000000 0x00 0x100000>; + no-map; + }; + + c71_3_memory_region: c71-memory@ab100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab100000 0x00 0xf00000>; + no-map; + }; }; vusb_main: regulator-vusb-main5v0 { @@ -107,6 +251,76 @@ states = <1800000 0x0>, <3300000 0x1>; }; + + dp0_pwr_3v3: regulator-dp0-pwr { + compatible = "regulator-fixed"; + regulator-name = "dp0-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&dp_pwr_en_pins_default>; + gpio = <&main_gpio0 4 0>; /* DP0_3V3 _EN */ + enable-active-high; + }; + + dp0: connector-dp0 { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp0_pwr_3v3>; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + + connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins_default>; + ddc-i2c-bus = <&mcu_i2c1>; + hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; /* HDMI_HPD */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + bridge-dvi { + compatible = "ti,tfp410"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pdn_pins_default>; + powerdown-gpios = <&wkup_gpio0 14 GPIO_ACTIVE_LOW>; /* HDMI_PDn */ + ti,deskew = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi1_out0>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &main_pmx0 { @@ -164,6 +378,57 @@ J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ >; }; + + dp0_pins_default: dp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */ + >; + }; + + dp_pwr_en_pins_default: dp-pwr-en-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x010, PIN_INPUT, 7) /* (AH33) MCAN13_RX.GPIO0_4 */ + >; + }; + + dss_vout0_pins_default: dss-vout0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x074, PIN_OUTPUT, 2) /* (AC33) MCAN2_TX.VOUT0_DATA0 */ + J784S4_IOPAD(0x070, PIN_OUTPUT, 2) /* (AH38) MCAN1_RX.VOUT0_DATA1 */ + J784S4_IOPAD(0x07c, PIN_OUTPUT, 2) /* (AJ38) MCASP0_AXR3.VOUT0_DATA2 */ + J784S4_IOPAD(0x068, PIN_OUTPUT, 2) /* (AE38) MCAN0_RX.VOUT0_DATA3 */ + J784S4_IOPAD(0x064, PIN_OUTPUT, 2) /* (AF38) MCAN0_TX.VOUT0_DATA4 */ + J784S4_IOPAD(0x060, PIN_OUTPUT, 2) /* (AE36) MCASP2_AXR1.VOUT0_DATA5 */ + J784S4_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AC36) MCASP2_AXR0.VOUT0_DATA6 */ + J784S4_IOPAD(0x058, PIN_OUTPUT, 2) /* (AE37) MCASP2_AFSX.VOUT0_DATA7 */ + J784S4_IOPAD(0x054, PIN_OUTPUT, 2) /* (AD37) MCASP2_ACLKX.VOUT0_DATA8 */ + J784S4_IOPAD(0x050, PIN_OUTPUT, 2) /* (AC37) MCASP1_AXR2.VOUT0_DATA9 */ + J784S4_IOPAD(0x04c, PIN_OUTPUT, 2) /* (AC32) MCASP1_AXR1.VOUT0_DATA10 */ + J784S4_IOPAD(0x048, PIN_OUTPUT, 2) /* (AK33) MCASP0_AXR2.VOUT0_DATA11 */ + J784S4_IOPAD(0x044, PIN_OUTPUT, 2) /* (AG37) MCASP0_AXR1.VOUT0_DATA12 */ + J784S4_IOPAD(0x040, PIN_OUTPUT, 2) /* (AF37) MCASP0_AXR0.VOUT0_DATA13 */ + J784S4_IOPAD(0x03c, PIN_OUTPUT, 2) /* (AK38) MCASP0_AFSX.VOUT0_DATA14 */ + J784S4_IOPAD(0x038, PIN_OUTPUT, 2) /* (AK35) MCASP0_ACLKX.VOUT0_DATA15 */ + J784S4_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AJ32) EXT_REFCLK1.VOUT0_DATA16 */ + J784S4_IOPAD(0x030, PIN_OUTPUT, 2) /* (AK37) GPIO0_12.VOUT0_DATA17 */ + J784S4_IOPAD(0x02c, PIN_OUTPUT, 2) /* (AL32) GPIO0_11.VOUT0_DATA18 */ + J784S4_IOPAD(0x028, PIN_OUTPUT, 2) /* (AE33) MCAN16_RX.VOUT0_DATA19 */ + J784S4_IOPAD(0x024, PIN_OUTPUT, 2) /* (AH34) MCAN16_TX.VOUT0_DATA20 */ + J784S4_IOPAD(0x020, PIN_OUTPUT, 2) /* (AJ35) MCAN15_RX.VOUT0_DATA21 */ + J784S4_IOPAD(0x01c, PIN_OUTPUT, 2) /* (AG34) MCAN15_TX.VOUT0_DATA22 */ + J784S4_IOPAD(0x018, PIN_OUTPUT, 2) /* (AK36) MCAN14_RX.VOUT0_DATA23 */ + J784S4_IOPAD(0x084, PIN_OUTPUT, 2) /* (AG38) MCASP0_AXR5.VOUT0_DE */ + J784S4_IOPAD(0x080, PIN_OUTPUT, 2) /* (AK34) MCASP0_AXR4.VOUT0_HSYNC */ + J784S4_IOPAD(0x078, PIN_OUTPUT, 2) /* (AH37) MCAN2_RX.VOUT0_PCLK */ + J784S4_IOPAD(0x088, PIN_OUTPUT, 2) /* (AF36) MCASP0_AXR6.VOUT0_VSYNC */ + >; + }; + + hdmi_hpd_pins_default: hdmi-hpd-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */ + >; + }; }; &wkup_pmx2 { @@ -238,6 +503,21 @@ J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */ >; }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) + /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ + J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) + >; + }; + + hdmi_pdn_pins_default: hdmi-pdn-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */ + >; + }; }; &wkup_pmx3 { @@ -248,6 +528,90 @@ }; }; +&mailbox0_cluster0 { + status = "okay"; + interrupts = <436>; + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + interrupts = <432>; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + interrupts = <428>; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + status = "okay"; + interrupts = <424>; + mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + interrupts = <420>; + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "okay"; + interrupts = <416>; + mbox_c71_2: mbox-c71-2 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_3: mbox-c71-3 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + &wkup_uart0 { /* Firmware usage */ status = "reserved"; @@ -362,3 +726,175 @@ phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; }; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&main_r5fss2_core0 { + mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core0>; + memory-region = <&main_r5fss2_core0_dma_memory_region>, + <&main_r5fss2_core0_memory_region>; +}; + +&main_r5fss2_core1 { + mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core1>; + memory-region = <&main_r5fss2_core1_dma_memory_region>, + <&main_r5fss2_core1_memory_region>; +}; + +&c71_0 { + status = "okay"; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; + +&c71_1 { + status = "okay"; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; +}; + +&c71_2 { + status = "okay"; + mboxes = <&mailbox0_cluster5>, <&mbox_c71_2>; + memory-region = <&c71_2_dma_memory_region>, + <&c71_2_memory_region>; +}; + +&c71_3 { + status = "okay"; + mboxes = <&mailbox0_cluster5>, <&mbox_c71_3>; + memory-region = <&c71_3_dma_memory_region>, + <&c71_3_memory_region>; +}; + +&wkup_gpio_intr { + status = "okay"; +}; + +&mcu_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c1_pins_default>; + clock-frequency = <100000>; +}; + +&serdes_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + +&dss { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dss_vout0_pins_default>; + assigned-clocks = <&k3_clks 218 2>, + <&k3_clks 218 5>, + <&k3_clks 218 14>, + <&k3_clks 218 18>; + assigned-clock-parents = <&k3_clks 218 3>, + <&k3_clks 218 7>, + <&k3_clks 218 16>, + <&k3_clks 218 22>; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; + serdes4_dp_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, + <&serdes_wiz4 3>, <&serdes_wiz4 4>; + }; +}; + +&mhdp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; + phys = <&serdes4_dp_link>; + phy-names = "dpphy"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* DP */ + port@0 { + reg = <0>; + + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + /* HDMI */ + port@1 { + reg = <1>; + + dpi1_out0: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; +}; + +&dp0_ports { + + port@0 { + reg = <0>; + + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + + dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index cdb1d6b2a9..264913f832 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -91,7 +91,7 @@ }; main_navss: bus@30000000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 6ffaf85fa6..3fc588b848 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -318,7 +318,7 @@ }; mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -637,4 +637,11 @@ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; + + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index f6c7e16145..746b9f8b1c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -181,7 +181,7 @@ }; main_navss: bus@30000000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 05d6ef127b..f7ab7719fc 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -440,7 +440,7 @@ }; mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -671,4 +671,11 @@ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; + + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 084f8f5b66..b03731b53a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -775,7 +775,7 @@ }; main_navss: bus@30000000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; @@ -807,6 +807,7 @@ ti,sci = <&sms>; ti,sci-dev-id = <265>; ti,interrupt-ranges = <0 0 256>; + ti,unmapped-event-sources = <&main_bcdma_csi>; }; secure_proxy_main: mailbox@32c00000 { @@ -1103,6 +1104,22 @@ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + main_bcdma_csi: dma-controller@311a0000 { + compatible = "ti,j721s2-dmss-bcdma-csi"; + reg = <0x00 0x311a0000 0x00 0x100>, + <0x00 0x35d00000 0x00 0x20000>, + <0x00 0x35c00000 0x00 0x10000>, + <0x00 0x35e00000 0x00 0x80000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <3>; + ti,sci = <&sms>; + ti,sci-dev-id = <225>; + ti,sci-rm-range-rchan = <0x21>; + ti,sci-rm-range-tchan = <0x22>; + status = "disabled"; + }; + cpts@310d0000 { compatible = "ti,j721e-cpts"; reg = <0x0 0x310d0000 0x0 0x400>; @@ -1695,4 +1712,217 @@ dss_ports: ports { }; }; + + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5c00000 0x00010000>, + <0x5c10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <279>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 279 1>; + firmware-name = "j721s2-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5d00000 0x00010000>, + <0x5d10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <280>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 280 1>; + firmware-name = "j721s2-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss1: r5fss@5e00000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5e00000 0x00 0x5e00000 0x20000>, + <0x5f00000 0x00 0x5f00000 0x20000>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@5e00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5e00000 0x00010000>, + <0x5e10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <281>; + ti,sci-proc-ids = <0x08 0xff>; + resets = <&k3_reset 281 1>; + firmware-name = "j721s2-main-r5f1_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss1_core1: r5f@5f00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5f00000 0x00010000>, + <0x5f10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <282>; + ti,sci-proc-ids = <0x09 0xff>; + resets = <&k3_reset 282 1>; + firmware-name = "j721s2-main-r5f1_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + c71_0: dsp@64800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x64800000 0x00 0x00080000>, + <0x00 0x64e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <8>; + ti,sci-proc-ids = <0x30 0xff>; + resets = <&k3_reset 8 1>; + firmware-name = "j721s2-c71_0-fw"; + status = "disabled"; + }; + + c71_1: dsp@65800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x65800000 0x00 0x00080000>, + <0x00 0x65e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <11>; + ti,sci-proc-ids = <0x31 0xff>; + resets = <&k3_reset 11 1>; + firmware-name = "j721s2-c71_1-fw"; + status = "disabled"; + }; + + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x700000 0x00 0x1000>; + ti,esm-pins = <688>, <689>; + bootph-pre-ram; + }; + + watchdog0: watchdog@2200000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2200000 0x00 0x100>; + clocks = <&k3_clks 286 1>; + power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 286 1>; + assigned-clock-parents = <&k3_clks 286 5>; + }; + + watchdog1: watchdog@2210000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2210000 0x00 0x100>; + clocks = <&k3_clks 287 1>; + power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 287 1>; + assigned-clock-parents = <&k3_clks 287 5>; + }; + + /* + * The following RTI instances are coupled with MCU R5Fs, c7x and + * GPU so keeping them reserved as these will be used by their + * respective firmware + */ + watchdog2: watchdog@22f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x22f0000 0x00 0x100>; + clocks = <&k3_clks 290 1>; + power-domains = <&k3_pds 290 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 290 1>; + assigned-clock-parents = <&k3_clks 290 5>; + /* reserved for GPU */ + status = "reserved"; + }; + + watchdog3: watchdog@2300000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2300000 0x00 0x100>; + clocks = <&k3_clks 288 1>; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 288 1>; + assigned-clock-parents = <&k3_clks 288 5>; + /* reserved for C7X_0 */ + status = "reserved"; + }; + + watchdog4: watchdog@2310000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2310000 0x00 0x100>; + clocks = <&k3_clks 289 1>; + power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 289 1>; + assigned-clock-parents = <&k3_clks 289 5>; + /* reserved for C7X_1 */ + status = "reserved"; + }; + + watchdog5: watchdog@23c0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23c0000 0x00 0x100>; + clocks = <&k3_clks 291 1>; + power-domains = <&k3_pds 291 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 291 1>; + assigned-clock-parents = <&k3_clks 291 5>; + /* reserved for MAIN_R5F0_0 */ + status = "reserved"; + }; + + watchdog6: watchdog@23d0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23d0000 0x00 0x100>; + clocks = <&k3_clks 292 1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 292 1>; + assigned-clock-parents = <&k3_clks 292 5>; + /* reserved for MAIN_R5F0_1 */ + status = "reserved"; + }; + + watchdog7: watchdog@23e0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23e0000 0x00 0x100>; + clocks = <&k3_clks 293 1>; + power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 293 1>; + assigned-clock-parents = <&k3_clks 293 5>; + /* reserved for MAIN_R5F1_0 */ + status = "reserved"; + }; + + watchdog8: watchdog@23f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23f0000 0x00 0x100>; + clocks = <&k3_clks 294 1>; + power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 294 1>; + assigned-clock-parents = <&k3_clks 294 5>; + /* reserved for MAIN_R5F1_1 */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 2ddad93185..7254f3bd36 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -443,7 +443,7 @@ }; mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -655,4 +655,84 @@ power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; #thermal-sensor-cells = <1>; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,j721s2-r5f"; + reg = <0x41000000 0x00010000>, + <0x41010000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <284>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 284 1>; + firmware-name = "j721s2-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,j721s2-r5f"; + reg = <0x41400000 0x00010000>, + <0x41410000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <285>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 285 1>; + firmware-name = "j721s2-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; + + wkup_esm: esm@42080000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x42080000 0x00 0x1000>; + ti,esm-pins = <63>; + bootph-pre-ram; + }; + + /* + * The 2 RTI instances are couple with MCU R5Fs so keeping them + * reserved as these will be used by their respective firmware + */ + mcu_watchdog0: watchdog@40600000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x40600000 0x00 0x100>; + clocks = <&k3_clks 295 1>; + power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 295 1>; + assigned-clock-parents = <&k3_clks 295 5>; + /* reserved for MCU_R5F0_0 */ + status = "reserved"; + }; + + mcu_watchdog1: watchdog@40610000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x40610000 0x00 0x100>; + clocks = <&k3_clks 296 1>; + power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 296 1>; + assigned-clock-parents = <&k3_clks 296 5>; + /* reserved for MCU_R5F0_1 */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index a4006f3280..dcad372620 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -29,6 +29,108 @@ alignment = <0x1000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a8000000 { + reg = <0x00 0xa8000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; }; mux0: mux-controller { @@ -151,3 +253,109 @@ cdns,read-delay = <4>; }; }; + +&mailbox0_cluster0 { + status = "okay"; + interrupts = <436>; + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + interrupts = <432>; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + interrupts = <428>; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + interrupts = <420>; + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&c71_0 { + status = "okay"; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; + +&c71_1 { + status = "okay"; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index 5991c2e1d9..f1f4c8634a 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -249,6 +249,28 @@ states = <1800000 0x0>, <3300000 0x1>; }; + + dp0_pwr_3v3: regulator-dp0-prw { + compatible = "regulator-fixed"; + regulator-name = "dp0-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + dp0: connector-dp0 { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp0_pwr_3v3>; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; }; &main_pmx0 { @@ -289,6 +311,19 @@ J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ >; }; + + dp0_pins_default: dp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */ + >; + }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */ + J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */ + >; + }; }; &wkup_pmx2 { @@ -862,3 +897,85 @@ ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; + +&serdes_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + +&dss { + status = "okay"; + assigned-clocks = <&k3_clks 218 2>, + <&k3_clks 218 5>, + <&k3_clks 218 14>, + <&k3_clks 218 18>; + assigned-clock-parents = <&k3_clks 218 3>, + <&k3_clks 218 7>, + <&k3_clks 218 16>, + <&k3_clks 218 22>; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; + serdes4_dp_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, + <&serdes_wiz4 3>, <&serdes_wiz4 4>; + }; +}; + +&mhdp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; + phys = <&serdes4_dp_link>; + phy-names = "dpphy"; +}; + +&dss_ports { + /* DP */ + port { + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; +}; + +&main_i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; + clock-frequency = <400000>; + + exp4: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&dp0_ports { + port@0 { + reg = <0>; + + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + + dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index efed2d683f..d89bcddcfe 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -5,6 +5,21 @@ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/mux/mux.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-ti.h> + +#include "k3-serdes.h" + +/ { + serdes_refclk: clock-serdes { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* To be enabled when serdes_wiz* is functional */ + status = "disabled"; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -26,6 +41,42 @@ }; }; + scm_conf: bus@100000 { + compatible = "simple-bus"; + reg = <0x00 0x00100000 0x00 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00100000 0x1c000>; + + serdes_ln_ctrl: mux-controller@4080 { + compatible = "reg-mux"; + reg = <0x00004080 0x30>; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4088 0x3>, <0x408c 0x3>, /* SERDES0 lane2/3 select */ + <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ + <0x4098 0x3>, <0x409c 0x3>, /* SERDES1 lane2/3 select */ + <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ + <0x40a8 0x3>, <0x40ac 0x3>; /* SERDES2 lane2/3 select */ + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, + <J784S4_SERDES0_LANE1_PCIE1_LANE1>, + <J784S4_SERDES0_LANE2_IP3_UNUSED>, + <J784S4_SERDES0_LANE3_USB>, + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, + <J784S4_SERDES1_LANE1_PCIE0_LANE1>, + <J784S4_SERDES1_LANE2_PCIE0_LANE2>, + <J784S4_SERDES1_LANE3_PCIE0_LANE3>, + <J784S4_SERDES2_LANE0_IP2_UNUSED>, + <J784S4_SERDES2_LANE1_IP2_UNUSED>, + <J784S4_SERDES2_LANE2_QSGMII_LANE1>, + <J784S4_SERDES2_LANE3_QSGMII_LANE2>, + <J784S4_SERDES4_LANE0_EDP_LANE0>, + <J784S4_SERDES4_LANE1_EDP_LANE1>, + <J784S4_SERDES4_LANE2_EDP_LANE2>, + <J784S4_SERDES4_LANE3_EDP_LANE3>; + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -669,6 +720,160 @@ status = "disabled"; }; + serdes_wiz0: wiz@5060000 { + compatible = "ti,j784s4-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk"; + assigned-clocks = <&k3_clks 404 6>; + assigned-clock-parents = <&k3_clks 404 10>; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x5060000 0x00 0x5060000 0x10000>; + status = "disabled"; + + serdes0: serdes@5060000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05060000 0x010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 404 6>, + <&k3_clks 404 6>, + <&k3_clks 404 6>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + status = "disabled"; + }; + }; + + serdes_wiz1: wiz@5070000 { + compatible = "ti,j784s4-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk"; + assigned-clocks = <&k3_clks 405 6>; + assigned-clock-parents = <&k3_clks 405 10>; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x05070000 0x00 0x05070000 0x10000>; + status = "disabled"; + + serdes1: serdes@5070000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05070000 0x010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz1 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz1 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 405 6>, + <&k3_clks 405 6>, + <&k3_clks 405 6>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + status = "disabled"; + }; + }; + + serdes_wiz2: wiz@5020000 { + compatible = "ti,j784s4-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk"; + assigned-clocks = <&k3_clks 406 6>; + assigned-clock-parents = <&k3_clks 406 10>; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x05020000 0x00 0x05020000 0x10000>; + status = "disabled"; + + serdes2: serdes@5020000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05020000 0x010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz2 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz2 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 406 6>, + <&k3_clks 406 6>, + <&k3_clks 406 6>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + status = "disabled"; + }; + }; + + serdes_wiz4: wiz@5050000 { + compatible = "ti,j784s4-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk"; + assigned-clocks = <&k3_clks 407 6>; + assigned-clock-parents = <&k3_clks 407 10>; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x05050000 0x00 0x05050000 0x10000>, + <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */ + status = "disabled"; + + serdes4: serdes@5050000 { + /* + * Note: we also map DPTX PHY registers as the Torrent + * needs to manage those. + */ + compatible = "ti,j721e-serdes-10g"; + reg = <0x05050000 0x010000>, + <0x0a030a00 0x40>; /* DPTX PHY */ + reg-names = "torrent_phy"; + resets = <&serdes_wiz4 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz4 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 407 6>, + <&k3_clks 407 6>, + <&k3_clks 407 6>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + status = "disabled"; + }; + }; + main_navss: bus@30000000 { bootph-all; compatible = "simple-bus"; @@ -703,6 +908,7 @@ ti,sci = <&sms>; ti,sci-dev-id = <321>; ti,interrupt-ranges = <0 0 256>; + ti,unmapped-event-sources = <&main_bcdma_csi>; }; secure_proxy_main: mailbox@32c00000 { @@ -1000,6 +1206,22 @@ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + main_bcdma_csi: dma-controller@311a0000 { + compatible = "ti,j721s2-dmss-bcdma-csi"; + reg = <0x00 0x311a0000 0x00 0x100>, + <0x00 0x35d00000 0x00 0x20000>, + <0x00 0x35c00000 0x00 0x10000>, + <0x00 0x35e00000 0x00 0x80000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <3>; + ti,sci = <&sms>; + ti,sci-dev-id = <281>; + ti,sci-rm-range-rchan = <0x21>; + ti,sci-rm-range-tchan = <0x22>; + status = "disabled"; + }; + cpts@310d0000 { compatible = "ti,j721e-cpts"; reg = <0x00 0x310d0000 0x00 0x400>; @@ -1568,4 +1790,279 @@ firmware-name = "j784s4-c71_3-fw"; status = "disabled"; }; + + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x700000 0x00 0x1000>; + ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>, + <695>; + bootph-pre-ram; + }; + + watchdog0: watchdog@2200000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2200000 0x00 0x100>; + clocks = <&k3_clks 348 1>; + power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 348 0>; + assigned-clock-parents = <&k3_clks 348 4>; + }; + + watchdog1: watchdog@2210000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2210000 0x00 0x100>; + clocks = <&k3_clks 349 1>; + power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 349 0>; + assigned-clock-parents = <&k3_clks 349 4>; + }; + + watchdog2: watchdog@2220000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2220000 0x00 0x100>; + clocks = <&k3_clks 350 1>; + power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 350 0>; + assigned-clock-parents = <&k3_clks 350 4>; + }; + + watchdog3: watchdog@2230000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2230000 0x00 0x100>; + clocks = <&k3_clks 351 1>; + power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 351 0>; + assigned-clock-parents = <&k3_clks 351 4>; + }; + + watchdog4: watchdog@2240000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2240000 0x00 0x100>; + clocks = <&k3_clks 352 1>; + power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 352 0>; + assigned-clock-parents = <&k3_clks 352 4>; + }; + + watchdog5: watchdog@2250000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2250000 0x00 0x100>; + clocks = <&k3_clks 353 1>; + power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 353 0>; + assigned-clock-parents = <&k3_clks 353 4>; + }; + + watchdog6: watchdog@2260000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2260000 0x00 0x100>; + clocks = <&k3_clks 354 1>; + power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 354 0>; + assigned-clock-parents = <&k3_clks 354 4>; + }; + + watchdog7: watchdog@2270000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2270000 0x00 0x100>; + clocks = <&k3_clks 355 1>; + power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 355 0>; + assigned-clock-parents = <&k3_clks 355 4>; + }; + + /* + * The following RTI instances are coupled with MCU R5Fs, c7x and + * GPU so keeping them reserved as these will be used by their + * respective firmware + */ + watchdog8: watchdog@22f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x22f0000 0x00 0x100>; + clocks = <&k3_clks 360 1>; + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 360 0>; + assigned-clock-parents = <&k3_clks 360 4>; + /* reserved for GPU */ + status = "reserved"; + }; + + watchdog9: watchdog@2300000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2300000 0x00 0x100>; + clocks = <&k3_clks 356 1>; + power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 356 0>; + assigned-clock-parents = <&k3_clks 356 4>; + /* reserved for C7X_0 DSP */ + status = "reserved"; + }; + + watchdog10: watchdog@2310000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2310000 0x00 0x100>; + clocks = <&k3_clks 357 1>; + power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 357 0>; + assigned-clock-parents = <&k3_clks 357 4>; + /* reserved for C7X_1 DSP */ + status = "reserved"; + }; + + watchdog11: watchdog@2320000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2320000 0x00 0x100>; + clocks = <&k3_clks 358 1>; + power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 358 0>; + assigned-clock-parents = <&k3_clks 358 4>; + /* reserved for C7X_2 DSP */ + status = "reserved"; + }; + + watchdog12: watchdog@2330000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2330000 0x00 0x100>; + clocks = <&k3_clks 359 1>; + power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 359 0>; + assigned-clock-parents = <&k3_clks 359 4>; + /* reserved for C7X_3 DSP */ + status = "reserved"; + }; + + watchdog13: watchdog@23c0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23c0000 0x00 0x100>; + clocks = <&k3_clks 361 1>; + power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 361 0>; + assigned-clock-parents = <&k3_clks 361 4>; + /* reserved for MAIN_R5F0_0 */ + status = "reserved"; + }; + + watchdog14: watchdog@23d0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23d0000 0x00 0x100>; + clocks = <&k3_clks 362 1>; + power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 362 0>; + assigned-clock-parents = <&k3_clks 362 4>; + /* reserved for MAIN_R5F0_1 */ + status = "reserved"; + }; + + watchdog15: watchdog@23e0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23e0000 0x00 0x100>; + clocks = <&k3_clks 363 1>; + power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 363 0>; + assigned-clock-parents = <&k3_clks 363 4>; + /* reserved for MAIN_R5F1_0 */ + status = "reserved"; + }; + + watchdog16: watchdog@23f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x23f0000 0x00 0x100>; + clocks = <&k3_clks 364 1>; + power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 364 0>; + assigned-clock-parents = <&k3_clks 364 4>; + /* reserved for MAIN_R5F1_1 */ + status = "reserved"; + }; + + watchdog17: watchdog@2540000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2540000 0x00 0x100>; + clocks = <&k3_clks 365 1>; + power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 365 0>; + assigned-clock-parents = <&k3_clks 366 4>; + /* reserved for MAIN_R5F2_0 */ + status = "reserved"; + }; + + watchdog18: watchdog@2550000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2550000 0x00 0x100>; + clocks = <&k3_clks 366 1>; + power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 366 0>; + assigned-clock-parents = <&k3_clks 366 4>; + /* reserved for MAIN_R5F2_1 */ + status = "reserved"; + }; + + mhdp: bridge@a000000 { + compatible = "ti,j721e-mhdp8546"; + reg = <0x0 0xa000000 0x0 0x30a00>, + <0x0 0x4f40000 0x0 0x20>; + reg-names = "mhdptx", "j721e-intg"; + clocks = <&k3_clks 217 11>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + dp0_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + /* Remote-endpoints are on the boards so + * ports are defined in the platform dt file. + */ + }; + }; + + dss: dss@4a00000 { + compatible = "ti,j721e-dss"; + reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */ + <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/ + <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/ + <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/ + <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */ + <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */ + <0x00 0x04a50000 0x00 0x10000>, /* vid1 */ + <0x00 0x04a60000 0x00 0x10000>, /* vid2 */ + <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */ + <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */ + <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */ + <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */ + <0x00 0x04a80000 0x00 0x10000>, /* vp1 */ + <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */ + <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */ + <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */ + <0x00 0x04af0000 0x00 0x10000>; /* wb */ + reg-names = "common_m", "common_s0", + "common_s1", "common_s2", + "vidl1", "vidl2","vid1","vid2", + "ovr1", "ovr2", "ovr3", "ovr4", + "vp1", "vp2", "vp3", "vp4", + "wb"; + clocks = <&k3_clks 218 0>, + <&k3_clks 218 2>, + <&k3_clks 218 5>, + <&k3_clks 218 14>, + <&k3_clks 218 18>; + clock-names = "fck", "vp1", "vp2", "vp3", "vp4"; + power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common_m", + "common_s0", + "common_s1", + "common_s2"; + status = "disabled"; + + dss_ports: ports { + /* Ports that DSS drives are platform specific + * so they are defined in platform dt file. + */ + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 4ab4018d36..adb5ea6b97 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -700,4 +700,44 @@ status = "disabled"; }; }; + + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; + + wkup_esm: esm@42080000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x42080000 0x00 0x1000>; + ti,esm-pins = <63>; + bootph-pre-ram; + }; + + /* + * The 2 RTI instances are couple with MCU R5Fs so keeping them + * reserved as these will be used by their respective firmware + */ + mcu_watchdog0: watchdog@40600000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x40600000 0x00 0x100>; + clocks = <&k3_clks 367 1>; + power-domains = <&k3_pds 367 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 367 0>; + assigned-clock-parents = <&k3_clks 367 4>; + /* reserved for MCU_R5F0_0 */ + status = "reserved"; + }; + + mcu_watchdog1: watchdog@40610000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x40610000 0x00 0x100>; + clocks = <&k3_clks 368 1>; + power-domains = <&k3_pds 368 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 368 0>; + assigned-clock-parents = <&k3_clks 368 4>; + /* reserved for MCU_R5F0_1 */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h index 29167f85c1..21b4886c47 100644 --- a/arch/arm64/boot/dts/ti/k3-serdes.h +++ b/arch/arm64/boot/dts/ti/k3-serdes.h @@ -111,7 +111,7 @@ #define J721S2_SERDES0_LANE2_EDP_LANE2 0x0 #define J721S2_SERDES0_LANE2_PCIE1_LANE2 0x1 -#define J721S2_SERDES0_LANE2_IP3_UNUSED 0x2 +#define J721S2_SERDES0_LANE2_USB_SWAP 0x2 #define J721S2_SERDES0_LANE2_IP4_UNUSED 0x3 #define J721S2_SERDES0_LANE3_EDP_LANE3 0x0 diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso index ae1b9b2bdb..92f4190d56 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso @@ -21,57 +21,57 @@ /dts-v1/; /plugin/; -&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - /* u14 - 0x40 - ina260 */ - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ -}; - -&amba { - si5332_0: si5332_0 { /* u17 */ +&{/} { + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <125000000>; }; - si5332_1: si5332_1 { /* u17 */ + si5332_1: si5332-1 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - si5332_2: si5332_2 { /* u17 */ + si5332_2: si5332-2 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; }; - si5332_3: si5332_3 { /* u17 */ + si5332_3: si5332-3 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; - si5332_4: si5332_4 { /* u17 */ + si5332_4: si5332-4 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5332_5: si5332_5 { /* u17 */ + si5332_5: si5332-5 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; }; +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + /* u14 - 0x40 - ina260 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + /* DP/USB 3.0 and SATA */ &psgtr { status = "okay"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index b59e48be64..f88b71f5b0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -16,58 +16,58 @@ /dts-v1/; /plugin/; -&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - /* u14 - 0x40 - ina260 */ - /* u43 - 0x2d - usb5744 */ - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ -}; - -&amba { - si5332_0: si5332_0 { /* u17 */ +&{/} { + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <125000000>; }; - si5332_1: si5332_1 { /* u17 */ + si5332_1: si5332-1 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - si5332_2: si5332_2 { /* u17 */ + si5332_2: si5332-2 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; }; - si5332_3: si5332_3 { /* u17 */ + si5332_3: si5332-3 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; - si5332_4: si5332_4 { /* u17 */ + si5332_4: si5332-4 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5332_5: si5332_5 { /* u17 */ + si5332_5: si5332-5 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; }; +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + /* u14 - 0x40 - ina260 */ + /* u43 - 0x2d - usb5744 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + /* DP/USB 3.0 */ &psgtr { status = "okay"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index a789119e64..b60aa1f893 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -423,6 +423,7 @@ CONFIG_MHI_WWAN_MBIM=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=m CONFIG_KEYBOARD_SNVS_PWRKEY=m CONFIG_KEYBOARD_IMX_SC_KEY=m CONFIG_KEYBOARD_CROS_EC=y @@ -599,6 +600,7 @@ CONFIG_PINCTRL_SDM660=y CONFIG_PINCTRL_SDM670=y CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM6115=y +CONFIG_PINCTRL_SM6115_LPASS_LPI=m CONFIG_PINCTRL_SM6125=y CONFIG_PINCTRL_SM6350=y CONFIG_PINCTRL_SM6375=y @@ -606,12 +608,14 @@ CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y CONFIG_PINCTRL_SM8250_LPASS_LPI=m CONFIG_PINCTRL_SM8350=y +CONFIG_PINCTRL_SM8350_LPASS_LPI=m CONFIG_PINCTRL_SM8450=y CONFIG_PINCTRL_SM8450_LPASS_LPI=m CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m CONFIG_PINCTRL_SM8550=y CONFIG_PINCTRL_SM8550_LPASS_LPI=m CONFIG_PINCTRL_LPASS_LPI=m +CONFIG_GPIO_AGGREGATOR=m CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y @@ -683,6 +687,7 @@ CONFIG_QCOM_SPMI_ADC_TM5=m CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_QCOM_LMH=m CONFIG_UNIPHIER_THERMAL=y +CONFIG_KHADAS_MCU_FAN_THERMAL=m CONFIG_WATCHDOG=y CONFIG_SL28CPLD_WATCHDOG=m CONFIG_ARM_SP805_WATCHDOG=y @@ -722,9 +727,11 @@ CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SL28CPLD=y CONFIG_RZ_MTU3=y CONFIG_MFD_TPS65219=y +CONFIG_MFD_TPS6594_I2C=m CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_WCD934X=m +CONFIG_MFD_KHADAS_MCU=m CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BD718XX=y @@ -762,6 +769,8 @@ CONFIG_RC_DEVICES=y CONFIG_IR_GPIO_CIR=m CONFIG_IR_MESON=m CONFIG_IR_SUNXI=m +CONFIG_MEDIA_CEC_SUPPORT=y +CONFIG_CEC_MESON_G12A_AO=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y @@ -835,6 +844,7 @@ CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m CONFIG_DRM_PANEL_LVDS=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_PANEL_EDP=m +CONFIG_DRM_PANEL_ILITEK_ILI9882T=m CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m CONFIG_DRM_PANEL_RAYDIUM_RM67191=m CONFIG_DRM_PANEL_SITRONIX_ST7703=m @@ -846,6 +856,7 @@ CONFIG_DRM_LONTIUM_LT9611UXC=m CONFIG_DRM_ITE_IT66121=m CONFIG_DRM_NWL_MIPI_DSI=m CONFIG_DRM_PARADE_PS8640=m +CONFIG_DRM_SAMSUNG_DSIM=m CONFIG_DRM_SII902X=m CONFIG_DRM_SIMPLE_BRIDGE=m CONFIG_DRM_THINE_THC63LVD1024=m @@ -1031,16 +1042,20 @@ CONFIG_USB_CONFIGFS_RNDIS=y CONFIG_USB_CONFIGFS_EEM=y CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_MASS_STORAGE=m CONFIG_TYPEC=m CONFIG_TYPEC_TCPM=m CONFIG_TYPEC_TCPCI=m CONFIG_TYPEC_FUSB302=m CONFIG_TYPEC_TPS6598X=m CONFIG_TYPEC_HD3SS3220=m +CONFIG_TYPEC_QCOM_PMIC=m CONFIG_TYPEC_UCSI=m CONFIG_TYPEC_MUX_FSA4480=m +CONFIG_TYPEC_MUX_NB7VPQ904M=m CONFIG_UCSI_CCG=m CONFIG_TYPEC_MUX_GPIO_SBU=m +CONFIG_TYPEC_DP_ALTMODE=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -1106,6 +1121,7 @@ CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_PCF85063=m CONFIG_RTC_DRV_PCF85363=m +CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_RX8581=m @@ -1161,6 +1177,7 @@ CONFIG_XEN_GRANT_DEV_ALLOC=y CONFIG_STAGING=y CONFIG_STAGING_MEDIA=y CONFIG_VIDEO_MAX96712=m +CONFIG_VIDEO_MESON_VDEC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y @@ -1335,6 +1352,7 @@ CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R9A07G043=y CONFIG_ARCH_R9A07G044=y CONFIG_ARCH_R9A07G054=y +CONFIG_ARCH_R9A08G045=y CONFIG_ARCH_R9A09G011=y CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_ROCKCHIP_PM_DOMAINS=y @@ -1422,6 +1440,7 @@ CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m CONFIG_PHY_QCOM_USB_HS_28NM=m CONFIG_PHY_QCOM_USB_SS=m CONFIG_PHY_QCOM_SGMII_ETH=m +CONFIG_PHY_QCOM_M31_USB=m CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y CONFIG_PHY_RCAR_GEN3_PCIE=y CONFIG_PHY_RCAR_GEN3_USB2=y @@ -1452,6 +1471,7 @@ CONFIG_QCOM_L3_PMU=y CONFIG_ARM_SPE_PMU=m CONFIG_ARM_DMC620_PMU=m CONFIG_HISI_PMU=y +CONFIG_MESON_DDR_PMU=m CONFIG_NVMEM_LAYOUT_SL28_VPD=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_IMX_OCOTP_ELE=m diff --git a/arch/arm64/configs/hardening.config b/arch/arm64/configs/hardening.config new file mode 100644 index 0000000000..b0e7952089 --- /dev/null +++ b/arch/arm64/configs/hardening.config @@ -0,0 +1,22 @@ +# Basic kernel hardening options (specific to arm64) + +# Make sure PAN emulation is enabled. +CONFIG_ARM64_SW_TTBR0_PAN=y + +# Software Shadow Stack or PAC +CONFIG_SHADOW_CALL_STACK=y + +# Pointer authentication (ARMv8.3 and later). If hardware actually supports +# it, one can turn off CONFIG_STACKPROTECTOR_STRONG with this enabled. +CONFIG_ARM64_PTR_AUTH=y +CONFIG_ARM64_PTR_AUTH_KERNEL=y + +# Available in ARMv8.5 and later. +CONFIG_ARM64_BTI=y +CONFIG_ARM64_BTI_KERNEL=y +CONFIG_ARM64_MTE=y +CONFIG_KASAN_HW_TAGS=y +CONFIG_ARM64_E0PD=y + +# Available in ARMv8.7 and later. +CONFIG_ARM64_EPAN=y diff --git a/arch/arm64/crypto/nhpoly1305-neon-glue.c b/arch/arm64/crypto/nhpoly1305-neon-glue.c index cd882c35d9..e4a0b463f0 100644 --- a/arch/arm64/crypto/nhpoly1305-neon-glue.c +++ b/arch/arm64/crypto/nhpoly1305-neon-glue.c @@ -34,6 +34,14 @@ static int nhpoly1305_neon_update(struct shash_desc *desc, return 0; } +static int nhpoly1305_neon_digest(struct shash_desc *desc, + const u8 *src, unsigned int srclen, u8 *out) +{ + return crypto_nhpoly1305_init(desc) ?: + nhpoly1305_neon_update(desc, src, srclen) ?: + crypto_nhpoly1305_final(desc, out); +} + static struct shash_alg nhpoly1305_alg = { .base.cra_name = "nhpoly1305", .base.cra_driver_name = "nhpoly1305-neon", @@ -44,6 +52,7 @@ static struct shash_alg nhpoly1305_alg = { .init = crypto_nhpoly1305_init, .update = nhpoly1305_neon_update, .final = crypto_nhpoly1305_final, + .digest = nhpoly1305_neon_digest, .setkey = crypto_nhpoly1305_setkey, .descsize = sizeof(struct nhpoly1305_state), }; diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S index 889ca0f897..9b1f2d82a6 100644 --- a/arch/arm64/crypto/sha1-ce-core.S +++ b/arch/arm64/crypto/sha1-ce-core.S @@ -62,10 +62,10 @@ .endm /* - * int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, - * int blocks) + * int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, + * int blocks) */ -SYM_FUNC_START(sha1_ce_transform) +SYM_FUNC_START(__sha1_ce_transform) /* load round constants */ loadrc k0.4s, 0x5a827999, w6 loadrc k1.4s, 0x6ed9eba1, w6 @@ -147,4 +147,4 @@ CPU_LE( rev32 v11.16b, v11.16b ) str dgb, [x0, #16] mov w0, w2 ret -SYM_FUNC_END(sha1_ce_transform) +SYM_FUNC_END(__sha1_ce_transform) diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c index 71fa4f1122..1dd93e1fcb 100644 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -29,18 +29,19 @@ struct sha1_ce_state { extern const u32 sha1_ce_offsetof_count; extern const u32 sha1_ce_offsetof_finalize; -asmlinkage int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, - int blocks); +asmlinkage int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, + int blocks); -static void __sha1_ce_transform(struct sha1_state *sst, u8 const *src, - int blocks) +static void sha1_ce_transform(struct sha1_state *sst, u8 const *src, + int blocks) { while (blocks) { int rem; kernel_neon_begin(); - rem = sha1_ce_transform(container_of(sst, struct sha1_ce_state, - sst), src, blocks); + rem = __sha1_ce_transform(container_of(sst, + struct sha1_ce_state, + sst), src, blocks); kernel_neon_end(); src += (blocks - rem) * SHA1_BLOCK_SIZE; blocks = rem; @@ -59,7 +60,7 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data, return crypto_sha1_update(desc, data, len); sctx->finalize = 0; - sha1_base_do_update(desc, data, len, __sha1_ce_transform); + sha1_base_do_update(desc, data, len, sha1_ce_transform); return 0; } @@ -79,9 +80,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, */ sctx->finalize = finalize; - sha1_base_do_update(desc, data, len, __sha1_ce_transform); + sha1_base_do_update(desc, data, len, sha1_ce_transform); if (!finalize) - sha1_base_do_finalize(desc, __sha1_ce_transform); + sha1_base_do_finalize(desc, sha1_ce_transform); return sha1_base_finish(desc, out); } @@ -93,7 +94,7 @@ static int sha1_ce_final(struct shash_desc *desc, u8 *out) return crypto_sha1_finup(desc, NULL, 0, out); sctx->finalize = 0; - sha1_base_do_finalize(desc, __sha1_ce_transform); + sha1_base_do_finalize(desc, sha1_ce_transform); return sha1_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S index 491179922f..fce84d88dd 100644 --- a/arch/arm64/crypto/sha2-ce-core.S +++ b/arch/arm64/crypto/sha2-ce-core.S @@ -71,11 +71,11 @@ .word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 /* - * void sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src, - * int blocks) + * int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src, + * int blocks) */ .text -SYM_FUNC_START(sha2_ce_transform) +SYM_FUNC_START(__sha256_ce_transform) /* load round constants */ adr_l x8, .Lsha2_rcon ld1 { v0.4s- v3.4s}, [x8], #64 @@ -154,4 +154,4 @@ CPU_LE( rev32 v19.16b, v19.16b ) 3: st1 {dgav.4s, dgbv.4s}, [x0] mov w0, w2 ret -SYM_FUNC_END(sha2_ce_transform) +SYM_FUNC_END(__sha256_ce_transform) diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c index c57a6119fe..0a44d2e7ee 100644 --- a/arch/arm64/crypto/sha2-ce-glue.c +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -30,18 +30,19 @@ struct sha256_ce_state { extern const u32 sha256_ce_offsetof_count; extern const u32 sha256_ce_offsetof_finalize; -asmlinkage int sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src, - int blocks); +asmlinkage int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src, + int blocks); -static void __sha2_ce_transform(struct sha256_state *sst, u8 const *src, +static void sha256_ce_transform(struct sha256_state *sst, u8 const *src, int blocks) { while (blocks) { int rem; kernel_neon_begin(); - rem = sha2_ce_transform(container_of(sst, struct sha256_ce_state, - sst), src, blocks); + rem = __sha256_ce_transform(container_of(sst, + struct sha256_ce_state, + sst), src, blocks); kernel_neon_end(); src += (blocks - rem) * SHA256_BLOCK_SIZE; blocks = rem; @@ -55,8 +56,8 @@ const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state, asmlinkage void sha256_block_data_order(u32 *digest, u8 const *src, int blocks); -static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src, - int blocks) +static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src, + int blocks) { sha256_block_data_order(sst->state, src, blocks); } @@ -68,10 +69,10 @@ static int sha256_ce_update(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) return sha256_base_do_update(desc, data, len, - __sha256_block_data_order); + sha256_arm64_transform); sctx->finalize = 0; - sha256_base_do_update(desc, data, len, __sha2_ce_transform); + sha256_base_do_update(desc, data, len, sha256_ce_transform); return 0; } @@ -85,8 +86,8 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) { if (len) sha256_base_do_update(desc, data, len, - __sha256_block_data_order); - sha256_base_do_finalize(desc, __sha256_block_data_order); + sha256_arm64_transform); + sha256_base_do_finalize(desc, sha256_arm64_transform); return sha256_base_finish(desc, out); } @@ -96,9 +97,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, */ sctx->finalize = finalize; - sha256_base_do_update(desc, data, len, __sha2_ce_transform); + sha256_base_do_update(desc, data, len, sha256_ce_transform); if (!finalize) - sha256_base_do_finalize(desc, __sha2_ce_transform); + sha256_base_do_finalize(desc, sha256_ce_transform); return sha256_base_finish(desc, out); } @@ -107,15 +108,22 @@ static int sha256_ce_final(struct shash_desc *desc, u8 *out) struct sha256_ce_state *sctx = shash_desc_ctx(desc); if (!crypto_simd_usable()) { - sha256_base_do_finalize(desc, __sha256_block_data_order); + sha256_base_do_finalize(desc, sha256_arm64_transform); return sha256_base_finish(desc, out); } sctx->finalize = 0; - sha256_base_do_finalize(desc, __sha2_ce_transform); + sha256_base_do_finalize(desc, sha256_ce_transform); return sha256_base_finish(desc, out); } +static int sha256_ce_digest(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + sha256_base_init(desc); + return sha256_ce_finup(desc, data, len, out); +} + static int sha256_ce_export(struct shash_desc *desc, void *out) { struct sha256_ce_state *sctx = shash_desc_ctx(desc); @@ -155,6 +163,7 @@ static struct shash_alg algs[] = { { .update = sha256_ce_update, .final = sha256_ce_final, .finup = sha256_ce_finup, + .digest = sha256_ce_digest, .export = sha256_ce_export, .import = sha256_ce_import, .descsize = sizeof(struct sha256_ce_state), diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c index 9b5c86e07a..35356987cc 100644 --- a/arch/arm64/crypto/sha256-glue.c +++ b/arch/arm64/crypto/sha256-glue.c @@ -27,8 +27,8 @@ asmlinkage void sha256_block_data_order(u32 *digest, const void *data, unsigned int num_blks); EXPORT_SYMBOL(sha256_block_data_order); -static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src, - int blocks) +static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src, + int blocks) { sha256_block_data_order(sst->state, src, blocks); } @@ -36,8 +36,8 @@ static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src, asmlinkage void sha256_block_neon(u32 *digest, const void *data, unsigned int num_blks); -static void __sha256_block_neon(struct sha256_state *sst, u8 const *src, - int blocks) +static void sha256_neon_transform(struct sha256_state *sst, u8 const *src, + int blocks) { sha256_block_neon(sst->state, src, blocks); } @@ -45,17 +45,15 @@ static void __sha256_block_neon(struct sha256_state *sst, u8 const *src, static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - return sha256_base_do_update(desc, data, len, - __sha256_block_data_order); + return sha256_base_do_update(desc, data, len, sha256_arm64_transform); } static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { if (len) - sha256_base_do_update(desc, data, len, - __sha256_block_data_order); - sha256_base_do_finalize(desc, __sha256_block_data_order); + sha256_base_do_update(desc, data, len, sha256_arm64_transform); + sha256_base_do_finalize(desc, sha256_arm64_transform); return sha256_base_finish(desc, out); } @@ -98,7 +96,7 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) return sha256_base_do_update(desc, data, len, - __sha256_block_data_order); + sha256_arm64_transform); while (len > 0) { unsigned int chunk = len; @@ -114,7 +112,7 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data, sctx->count % SHA256_BLOCK_SIZE; kernel_neon_begin(); - sha256_base_do_update(desc, data, chunk, __sha256_block_neon); + sha256_base_do_update(desc, data, chunk, sha256_neon_transform); kernel_neon_end(); data += chunk; len -= chunk; @@ -128,13 +126,13 @@ static int sha256_finup_neon(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) { if (len) sha256_base_do_update(desc, data, len, - __sha256_block_data_order); - sha256_base_do_finalize(desc, __sha256_block_data_order); + sha256_arm64_transform); + sha256_base_do_finalize(desc, sha256_arm64_transform); } else { if (len) sha256_update_neon(desc, data, len); kernel_neon_begin(); - sha256_base_do_finalize(desc, __sha256_block_neon); + sha256_base_do_finalize(desc, sha256_neon_transform); kernel_neon_end(); } return sha256_base_finish(desc, out); diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S index b6a3a36e15..91ef68b15f 100644 --- a/arch/arm64/crypto/sha512-ce-core.S +++ b/arch/arm64/crypto/sha512-ce-core.S @@ -102,11 +102,11 @@ .endm /* - * void sha512_ce_transform(struct sha512_state *sst, u8 const *src, - * int blocks) + * int __sha512_ce_transform(struct sha512_state *sst, u8 const *src, + * int blocks) */ .text -SYM_FUNC_START(sha512_ce_transform) +SYM_FUNC_START(__sha512_ce_transform) /* load state */ ld1 {v8.2d-v11.2d}, [x0] @@ -203,4 +203,4 @@ CPU_LE( rev64 v19.16b, v19.16b ) 3: st1 {v8.2d-v11.2d}, [x0] mov w0, w2 ret -SYM_FUNC_END(sha512_ce_transform) +SYM_FUNC_END(__sha512_ce_transform) diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c index 94cb7580de..f3431fc623 100644 --- a/arch/arm64/crypto/sha512-ce-glue.c +++ b/arch/arm64/crypto/sha512-ce-glue.c @@ -26,27 +26,27 @@ MODULE_LICENSE("GPL v2"); MODULE_ALIAS_CRYPTO("sha384"); MODULE_ALIAS_CRYPTO("sha512"); -asmlinkage int sha512_ce_transform(struct sha512_state *sst, u8 const *src, - int blocks); +asmlinkage int __sha512_ce_transform(struct sha512_state *sst, u8 const *src, + int blocks); asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks); -static void __sha512_ce_transform(struct sha512_state *sst, u8 const *src, - int blocks) +static void sha512_ce_transform(struct sha512_state *sst, u8 const *src, + int blocks) { while (blocks) { int rem; kernel_neon_begin(); - rem = sha512_ce_transform(sst, src, blocks); + rem = __sha512_ce_transform(sst, src, blocks); kernel_neon_end(); src += (blocks - rem) * SHA512_BLOCK_SIZE; blocks = rem; } } -static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, - int blocks) +static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src, + int blocks) { sha512_block_data_order(sst->state, src, blocks); } @@ -54,8 +54,8 @@ static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, static int sha512_ce_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform - : __sha512_block_data_order; + sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform + : sha512_arm64_transform; sha512_base_do_update(desc, data, len, fn); return 0; @@ -64,8 +64,8 @@ static int sha512_ce_update(struct shash_desc *desc, const u8 *data, static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform - : __sha512_block_data_order; + sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform + : sha512_arm64_transform; sha512_base_do_update(desc, data, len, fn); sha512_base_do_finalize(desc, fn); @@ -74,8 +74,8 @@ static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, static int sha512_ce_final(struct shash_desc *desc, u8 *out) { - sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform - : __sha512_block_data_order; + sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform + : sha512_arm64_transform; sha512_base_do_finalize(desc, fn); return sha512_base_finish(desc, out); diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c index 2acff1c7df..62f129dea8 100644 --- a/arch/arm64/crypto/sha512-glue.c +++ b/arch/arm64/crypto/sha512-glue.c @@ -23,8 +23,8 @@ asmlinkage void sha512_block_data_order(u64 *digest, const void *data, unsigned int num_blks); EXPORT_SYMBOL(sha512_block_data_order); -static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, - int blocks) +static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src, + int blocks) { sha512_block_data_order(sst->state, src, blocks); } @@ -32,17 +32,15 @@ static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, static int sha512_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - return sha512_base_do_update(desc, data, len, - __sha512_block_data_order); + return sha512_base_do_update(desc, data, len, sha512_arm64_transform); } static int sha512_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { if (len) - sha512_base_do_update(desc, data, len, - __sha512_block_data_order); - sha512_base_do_finalize(desc, __sha512_block_data_order); + sha512_base_do_update(desc, data, len, sha512_arm64_transform); + sha512_base_do_finalize(desc, sha512_arm64_transform); return sha512_base_finish(desc, out); } diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index 5c8ee5a541..4b6d2d5205 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -6,5 +6,5 @@ generic-y += qspinlock.h generic-y += parport.h generic-y += user.h -generated-y += cpucaps.h +generated-y += cpucap-defs.h generated-y += sysreg-defs.h diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h index 94b486192e..d328f549b1 100644 --- a/arch/arm64/include/asm/alternative-macros.h +++ b/arch/arm64/include/asm/alternative-macros.h @@ -226,10 +226,10 @@ alternative_endif static __always_inline bool alternative_has_cap_likely(const unsigned long cpucap) { - compiletime_assert(cpucap < ARM64_NCAPS, - "cpucap must be < ARM64_NCAPS"); + if (!cpucap_is_possible(cpucap)) + return false; - asm_volatile_goto( + asm goto( ALTERNATIVE_CB("b %l[l_no]", %[cpucap], alt_cb_patch_nops) : : [cpucap] "i" (cpucap) @@ -244,10 +244,10 @@ l_no: static __always_inline bool alternative_has_cap_unlikely(const unsigned long cpucap) { - compiletime_assert(cpucap < ARM64_NCAPS, - "cpucap must be < ARM64_NCAPS"); + if (!cpucap_is_possible(cpucap)) + return false; - asm_volatile_goto( + asm goto( ALTERNATIVE("nop", "b %l[l_yes]", %[cpucap]) : : [cpucap] "i" (cpucap) diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 01281a5336..5f17261165 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -79,6 +79,14 @@ static inline u64 gic_read_iar_cavium_thunderx(void) return 0x3ff; } +static u64 __maybe_unused gic_read_iar(void) +{ + if (alternative_has_cap_unlikely(ARM64_WORKAROUND_CAVIUM_23154)) + return gic_read_iar_cavium_thunderx(); + else + return gic_read_iar_common(); +} + static inline void gic_write_ctlr(u32 val) { write_sysreg_s(val, SYS_ICC_CTLR_EL1); diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h index b0abc64f86..ecdb3cfcd0 100644 --- a/arch/arm64/include/asm/archrandom.h +++ b/arch/arm64/include/asm/archrandom.h @@ -63,7 +63,7 @@ static __always_inline bool __cpu_has_rng(void) { if (unlikely(!system_capabilities_finalized() && !preemptible())) return this_cpu_has_cap(ARM64_HAS_RNG); - return cpus_have_const_cap(ARM64_HAS_RNG); + return alternative_has_cap_unlikely(ARM64_HAS_RNG); } static inline size_t __must_check arch_get_random_longs(unsigned long *v, size_t max_longs) diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index d115451ed2..fefac75fa0 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -132,7 +132,7 @@ void flush_dcache_folio(struct folio *); static __always_inline void icache_inval_all_pou(void) { - if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC)) + if (alternative_has_cap_unlikely(ARM64_HAS_CACHE_DIC)) return; asm("ic ialluis"); diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h index e749838b9c..f3034099fd 100644 --- a/arch/arm64/include/asm/cpu.h +++ b/arch/arm64/include/asm/cpu.h @@ -63,12 +63,6 @@ struct cpuinfo_arm64 { u64 reg_id_aa64smfr0; struct cpuinfo_32bit aarch32; - - /* pseudo-ZCR for recording maximum ZCR_EL1 LEN value: */ - u64 reg_zcr; - - /* pseudo-SMCR for recording maximum SMCR_EL1 LEN value: */ - u64 reg_smcr; }; DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data); diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h new file mode 100644 index 0000000000..270680e2b5 --- /dev/null +++ b/arch/arm64/include/asm/cpucaps.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __ASM_CPUCAPS_H +#define __ASM_CPUCAPS_H + +#include <asm/cpucap-defs.h> + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +/* + * Check whether a cpucap is possible at compiletime. + */ +static __always_inline bool +cpucap_is_possible(const unsigned int cap) +{ + compiletime_assert(__builtin_constant_p(cap), + "cap must be a constant"); + compiletime_assert(cap < ARM64_NCAPS, + "cap must be < ARM64_NCAPS"); + + switch (cap) { + case ARM64_HAS_PAN: + return IS_ENABLED(CONFIG_ARM64_PAN); + case ARM64_HAS_EPAN: + return IS_ENABLED(CONFIG_ARM64_EPAN); + case ARM64_SVE: + return IS_ENABLED(CONFIG_ARM64_SVE); + case ARM64_SME: + case ARM64_SME2: + case ARM64_SME_FA64: + return IS_ENABLED(CONFIG_ARM64_SME); + case ARM64_HAS_CNP: + return IS_ENABLED(CONFIG_ARM64_CNP); + case ARM64_HAS_ADDRESS_AUTH: + case ARM64_HAS_GENERIC_AUTH: + return IS_ENABLED(CONFIG_ARM64_PTR_AUTH); + case ARM64_HAS_GIC_PRIO_MASKING: + return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI); + case ARM64_MTE: + return IS_ENABLED(CONFIG_ARM64_MTE); + case ARM64_BTI: + return IS_ENABLED(CONFIG_ARM64_BTI); + case ARM64_HAS_TLB_RANGE: + return IS_ENABLED(CONFIG_ARM64_TLB_RANGE); + case ARM64_UNMAP_KERNEL_AT_EL0: + return IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0); + case ARM64_WORKAROUND_843419: + return IS_ENABLED(CONFIG_ARM64_ERRATUM_843419); + case ARM64_WORKAROUND_1742098: + return IS_ENABLED(CONFIG_ARM64_ERRATUM_1742098); + case ARM64_WORKAROUND_2645198: + return IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198); + case ARM64_WORKAROUND_2658417: + return IS_ENABLED(CONFIG_ARM64_ERRATUM_2658417); + case ARM64_WORKAROUND_CAVIUM_23154: + return IS_ENABLED(CONFIG_CAVIUM_ERRATUM_23154); + case ARM64_WORKAROUND_NVIDIA_CARMEL_CNP: + return IS_ENABLED(CONFIG_NVIDIA_CARMEL_CNP_ERRATUM); + case ARM64_WORKAROUND_REPEAT_TLBI: + return IS_ENABLED(CONFIG_ARM64_WORKAROUND_REPEAT_TLBI); + } + + return true; +} +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 5bba393760..f6d416fe49 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -23,6 +23,7 @@ #include <linux/bug.h> #include <linux/jump_label.h> #include <linux/kernel.h> +#include <linux/cpumask.h> /* * CPU feature register tracking @@ -380,6 +381,7 @@ struct arm64_cpu_capabilities { * method is robust against being called multiple times. */ const struct arm64_cpu_capabilities *match_list; + const struct cpumask *cpus; }; static inline int cpucap_default_scope(const struct arm64_cpu_capabilities *cap) @@ -438,6 +440,11 @@ unsigned long cpu_get_elf_hwcap2(void); #define cpu_set_named_feature(name) cpu_set_feature(cpu_feature(name)) #define cpu_have_named_feature(name) cpu_have_feature(cpu_feature(name)) +static __always_inline bool boot_capabilities_finalized(void) +{ + return alternative_has_cap_likely(ARM64_ALWAYS_BOOT); +} + static __always_inline bool system_capabilities_finalized(void) { return alternative_has_cap_likely(ARM64_ALWAYS_SYSTEM); @@ -450,6 +457,8 @@ static __always_inline bool system_capabilities_finalized(void) */ static __always_inline bool cpus_have_cap(unsigned int num) { + if (__builtin_constant_p(num) && !cpucap_is_possible(num)) + return false; if (num >= ARM64_NCAPS) return false; return arch_test_bit(num, system_cpucaps); @@ -458,55 +467,37 @@ static __always_inline bool cpus_have_cap(unsigned int num) /* * Test for a capability without a runtime check. * - * Before capabilities are finalized, this returns false. - * After capabilities are finalized, this is patched to avoid a runtime check. + * Before boot capabilities are finalized, this will BUG(). + * After boot capabilities are finalized, this is patched to avoid a runtime + * check. * * @num must be a compile-time constant. */ -static __always_inline bool __cpus_have_const_cap(int num) +static __always_inline bool cpus_have_final_boot_cap(int num) { - if (num >= ARM64_NCAPS) - return false; - return alternative_has_cap_unlikely(num); + if (boot_capabilities_finalized()) + return alternative_has_cap_unlikely(num); + else + BUG(); } /* * Test for a capability without a runtime check. * - * Before capabilities are finalized, this will BUG(). - * After capabilities are finalized, this is patched to avoid a runtime check. + * Before system capabilities are finalized, this will BUG(). + * After system capabilities are finalized, this is patched to avoid a runtime + * check. * * @num must be a compile-time constant. */ static __always_inline bool cpus_have_final_cap(int num) { if (system_capabilities_finalized()) - return __cpus_have_const_cap(num); + return alternative_has_cap_unlikely(num); else BUG(); } -/* - * Test for a capability, possibly with a runtime check for non-hyp code. - * - * For hyp code, this behaves the same as cpus_have_final_cap(). - * - * For non-hyp code: - * Before capabilities are finalized, this behaves as cpus_have_cap(). - * After capabilities are finalized, this is patched to avoid a runtime check. - * - * @num must be a compile-time constant. - */ -static __always_inline bool cpus_have_const_cap(int num) -{ - if (is_hyp_code()) - return cpus_have_final_cap(num); - else if (system_capabilities_finalized()) - return __cpus_have_const_cap(num); - else - return cpus_have_cap(num); -} - static inline int __attribute_const__ cpuid_feature_extract_signed_field_width(u64 features, int field, int width) { @@ -626,7 +617,9 @@ static inline bool id_aa64pfr1_mte(u64 pfr1) return val >= ID_AA64PFR1_EL1_MTE_MTE2; } -void __init setup_cpu_features(void); +void __init setup_system_features(void); +void __init setup_user_features(void); + void check_local_cpu_capabilities(void); u64 read_sanitised_ftr_reg(u32 id); @@ -735,13 +728,12 @@ static inline bool system_supports_mixed_endian(void) static __always_inline bool system_supports_fpsimd(void) { - return !cpus_have_const_cap(ARM64_HAS_NO_FPSIMD); + return alternative_has_cap_likely(ARM64_HAS_FPSIMD); } static inline bool system_uses_hw_pan(void) { - return IS_ENABLED(CONFIG_ARM64_PAN) && - cpus_have_const_cap(ARM64_HAS_PAN); + return alternative_has_cap_unlikely(ARM64_HAS_PAN); } static inline bool system_uses_ttbr0_pan(void) @@ -752,26 +744,22 @@ static inline bool system_uses_ttbr0_pan(void) static __always_inline bool system_supports_sve(void) { - return IS_ENABLED(CONFIG_ARM64_SVE) && - cpus_have_const_cap(ARM64_SVE); + return alternative_has_cap_unlikely(ARM64_SVE); } static __always_inline bool system_supports_sme(void) { - return IS_ENABLED(CONFIG_ARM64_SME) && - cpus_have_const_cap(ARM64_SME); + return alternative_has_cap_unlikely(ARM64_SME); } static __always_inline bool system_supports_sme2(void) { - return IS_ENABLED(CONFIG_ARM64_SME) && - cpus_have_const_cap(ARM64_SME2); + return alternative_has_cap_unlikely(ARM64_SME2); } static __always_inline bool system_supports_fa64(void) { - return IS_ENABLED(CONFIG_ARM64_SME) && - cpus_have_const_cap(ARM64_SME_FA64); + return alternative_has_cap_unlikely(ARM64_SME_FA64); } static __always_inline bool system_supports_tpidr2(void) @@ -781,20 +769,17 @@ static __always_inline bool system_supports_tpidr2(void) static __always_inline bool system_supports_cnp(void) { - return IS_ENABLED(CONFIG_ARM64_CNP) && - cpus_have_const_cap(ARM64_HAS_CNP); + return alternative_has_cap_unlikely(ARM64_HAS_CNP); } static inline bool system_supports_address_auth(void) { - return IS_ENABLED(CONFIG_ARM64_PTR_AUTH) && - cpus_have_const_cap(ARM64_HAS_ADDRESS_AUTH); + return cpus_have_final_boot_cap(ARM64_HAS_ADDRESS_AUTH); } static inline bool system_supports_generic_auth(void) { - return IS_ENABLED(CONFIG_ARM64_PTR_AUTH) && - cpus_have_const_cap(ARM64_HAS_GENERIC_AUTH); + return alternative_has_cap_unlikely(ARM64_HAS_GENERIC_AUTH); } static inline bool system_has_full_ptr_auth(void) @@ -804,14 +789,12 @@ static inline bool system_has_full_ptr_auth(void) static __always_inline bool system_uses_irq_prio_masking(void) { - return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && - cpus_have_const_cap(ARM64_HAS_GIC_PRIO_MASKING); + return alternative_has_cap_unlikely(ARM64_HAS_GIC_PRIO_MASKING); } static inline bool system_supports_mte(void) { - return IS_ENABLED(CONFIG_ARM64_MTE) && - cpus_have_const_cap(ARM64_MTE); + return alternative_has_cap_unlikely(ARM64_MTE); } static inline bool system_has_prio_mask_debugging(void) @@ -822,13 +805,18 @@ static inline bool system_has_prio_mask_debugging(void) static inline bool system_supports_bti(void) { - return IS_ENABLED(CONFIG_ARM64_BTI) && cpus_have_const_cap(ARM64_BTI); + return cpus_have_final_cap(ARM64_BTI); +} + +static inline bool system_supports_bti_kernel(void) +{ + return IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && + cpus_have_final_boot_cap(ARM64_BTI); } static inline bool system_supports_tlb_range(void) { - return IS_ENABLED(CONFIG_ARM64_TLB_RANGE) && - cpus_have_const_cap(ARM64_HAS_TLB_RANGE); + return alternative_has_cap_unlikely(ARM64_HAS_TLB_RANGE); } int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt); diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 7c7493cb57..52f076afeb 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -61,6 +61,7 @@ #define ARM_CPU_IMP_HISI 0x48 #define ARM_CPU_IMP_APPLE 0x61 #define ARM_CPU_IMP_AMPERE 0xC0 +#define ARM_CPU_IMP_MICROSOFT 0x6D #define ARM_CPU_PART_AEM_V8 0xD0F #define ARM_CPU_PART_FOUNDATION 0xD00 @@ -135,6 +136,8 @@ #define AMPERE_CPU_PART_AMPERE1 0xAC3 +#define MICROSOFT_CPU_PART_AZURE_COBALT_100 0xD49 /* Based on r0p0 of ARM Neoverse N2 */ + #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) @@ -193,6 +196,7 @@ #define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX) #define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX) #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) +#define MIDR_MICROSOFT_AZURE_COBALT_100 MIDR_CPU_MODEL(ARM_CPU_IMP_MICROSOFT, MICROSOFT_CPU_PART_AZURE_COBALT_100) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ #define MIDR_FUJITSU_ERRATUM_010001 MIDR_FUJITSU_A64FX diff --git a/arch/arm64/include/asm/crash_core.h b/arch/arm64/include/asm/crash_core.h new file mode 100644 index 0000000000..9f5c8d339f --- /dev/null +++ b/arch/arm64/include/asm/crash_core.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _ARM64_CRASH_CORE_H +#define _ARM64_CRASH_CORE_H + +/* Current arm64 boot protocol requires 2MB alignment */ +#define CRASH_ALIGN SZ_2M + +#define CRASH_ADDR_LOW_MAX arm64_dma_phys_limit +#define CRASH_ADDR_HIGH_MAX (PHYS_MASK + 1) +#endif diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index 8df46f186c..7780d343ef 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -32,6 +32,32 @@ #define VFP_STATE_SIZE ((32 * 8) + 4) #endif +static inline unsigned long cpacr_save_enable_kernel_sve(void) +{ + unsigned long old = read_sysreg(cpacr_el1); + unsigned long set = CPACR_EL1_FPEN_EL1EN | CPACR_EL1_ZEN_EL1EN; + + write_sysreg(old | set, cpacr_el1); + isb(); + return old; +} + +static inline unsigned long cpacr_save_enable_kernel_sme(void) +{ + unsigned long old = read_sysreg(cpacr_el1); + unsigned long set = CPACR_EL1_FPEN_EL1EN | CPACR_EL1_SMEN_EL1EN; + + write_sysreg(old | set, cpacr_el1); + isb(); + return old; +} + +static inline void cpacr_restore(unsigned long cpacr) +{ + write_sysreg(cpacr, cpacr_el1); + isb(); +} + /* * When we defined the maximum SVE vector length we defined the ABI so * that the maximum vector length included all the reserved for future @@ -123,12 +149,12 @@ extern void sme_save_state(void *state, int zt); extern void sme_load_state(void const *state, int zt); struct arm64_cpu_capabilities; -extern void sve_kernel_enable(const struct arm64_cpu_capabilities *__unused); -extern void sme_kernel_enable(const struct arm64_cpu_capabilities *__unused); -extern void sme2_kernel_enable(const struct arm64_cpu_capabilities *__unused); -extern void fa64_kernel_enable(const struct arm64_cpu_capabilities *__unused); +extern void cpu_enable_fpsimd(const struct arm64_cpu_capabilities *__unused); +extern void cpu_enable_sve(const struct arm64_cpu_capabilities *__unused); +extern void cpu_enable_sme(const struct arm64_cpu_capabilities *__unused); +extern void cpu_enable_sme2(const struct arm64_cpu_capabilities *__unused); +extern void cpu_enable_fa64(const struct arm64_cpu_capabilities *__unused); -extern u64 read_zcr_features(void); extern u64 read_smcr_features(void); /* @@ -360,6 +386,7 @@ extern void sme_alloc(struct task_struct *task, bool flush); extern unsigned int sme_get_vl(void); extern int sme_set_current_vl(unsigned long arg); extern int sme_get_current_vl(void); +extern void sme_suspend_exit(void); /* * Return how many bytes of memory are required to store the full SME @@ -395,6 +422,7 @@ static inline int sme_max_vl(void) { return 0; } static inline int sme_max_virtualisable_vl(void) { return 0; } static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; } static inline int sme_get_current_vl(void) { return -EINVAL; } +static inline void sme_suspend_exit(void) { } static inline size_t sme_state_size(struct task_struct const *task) { diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index 521267478d..cd71e09ea1 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -139,6 +139,9 @@ #define KERNEL_HWCAP_SME_F16F16 __khwcap2_feature(SME_F16F16) #define KERNEL_HWCAP_MOPS __khwcap2_feature(MOPS) #define KERNEL_HWCAP_HBC __khwcap2_feature(HBC) +#define KERNEL_HWCAP_SVE_B16B16 __khwcap2_feature(SVE_B16B16) +#define KERNEL_HWCAP_LRCPC3 __khwcap2_feature(LRCPC3) +#define KERNEL_HWCAP_LSE128 __khwcap2_feature(LSE128) /* * This yields a mask that user programs can use to figure out what diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h index fac08e18bc..50ce8b697f 100644 --- a/arch/arm64/include/asm/irq.h +++ b/arch/arm64/include/asm/irq.h @@ -6,6 +6,9 @@ #include <asm-generic/irq.h> +void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu); +#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace + struct pt_regs; int set_handle_irq(void (*handle_irq)(struct pt_regs *)); diff --git a/arch/arm64/include/asm/irq_work.h b/arch/arm64/include/asm/irq_work.h index 81bbfa3a03..a1020285ea 100644 --- a/arch/arm64/include/asm/irq_work.h +++ b/arch/arm64/include/asm/irq_work.h @@ -2,8 +2,6 @@ #ifndef __ASM_IRQ_WORK_H #define __ASM_IRQ_WORK_H -extern void arch_irq_work_raise(void); - static inline bool arch_irq_work_has_interrupt(void) { return true; diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index 1f31ec146d..0a7186a938 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -21,12 +21,6 @@ * exceptions should be unmasked. */ -static __always_inline bool __irqflags_uses_pmr(void) -{ - return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && - alternative_has_cap_unlikely(ARM64_HAS_GIC_PRIO_MASKING); -} - static __always_inline void __daif_local_irq_enable(void) { barrier(); @@ -49,7 +43,7 @@ static __always_inline void __pmr_local_irq_enable(void) static inline void arch_local_irq_enable(void) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { __pmr_local_irq_enable(); } else { __daif_local_irq_enable(); @@ -77,7 +71,7 @@ static __always_inline void __pmr_local_irq_disable(void) static inline void arch_local_irq_disable(void) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { __pmr_local_irq_disable(); } else { __daif_local_irq_disable(); @@ -99,7 +93,7 @@ static __always_inline unsigned long __pmr_local_save_flags(void) */ static inline unsigned long arch_local_save_flags(void) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { return __pmr_local_save_flags(); } else { return __daif_local_save_flags(); @@ -118,7 +112,7 @@ static __always_inline bool __pmr_irqs_disabled_flags(unsigned long flags) static inline bool arch_irqs_disabled_flags(unsigned long flags) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { return __pmr_irqs_disabled_flags(flags); } else { return __daif_irqs_disabled_flags(flags); @@ -137,7 +131,7 @@ static __always_inline bool __pmr_irqs_disabled(void) static inline bool arch_irqs_disabled(void) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { return __pmr_irqs_disabled(); } else { return __daif_irqs_disabled(); @@ -169,7 +163,7 @@ static __always_inline unsigned long __pmr_local_irq_save(void) static inline unsigned long arch_local_irq_save(void) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { return __pmr_local_irq_save(); } else { return __daif_local_irq_save(); @@ -196,7 +190,7 @@ static __always_inline void __pmr_local_irq_restore(unsigned long flags) */ static inline void arch_local_irq_restore(unsigned long flags) { - if (__irqflags_uses_pmr()) { + if (system_uses_irq_prio_masking()) { __pmr_local_irq_restore(flags); } else { __daif_local_irq_restore(flags); diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h index 48ddc0f45d..6aafbb7899 100644 --- a/arch/arm64/include/asm/jump_label.h +++ b/arch/arm64/include/asm/jump_label.h @@ -18,7 +18,7 @@ static __always_inline bool arch_static_branch(struct static_key * const key, const bool branch) { - asm_volatile_goto( + asm goto( "1: nop \n\t" " .pushsection __jump_table, \"aw\" \n\t" " .align 3 \n\t" @@ -35,7 +35,7 @@ l_yes: static __always_inline bool arch_static_branch_jump(struct static_key * const key, const bool branch) { - asm_volatile_goto( + asm goto( "1: b %l[l_yes] \n\t" " .pushsection __jump_table, \"aw\" \n\t" " .align 3 \n\t" diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h index 05cd82eeca..be7a3680da 100644 --- a/arch/arm64/include/asm/kprobes.h +++ b/arch/arm64/include/asm/kprobes.h @@ -37,8 +37,6 @@ struct kprobe_ctlblk { void arch_remove_kprobe(struct kprobe *); int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); -int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); void __kretprobe_trampoline(void); void __kprobes *trampoline_probe_handler(struct pt_regs *regs); diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 1095c6647e..b85f46a73e 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -102,7 +102,9 @@ #define HCR_HOST_NVHE_PROTECTED_FLAGS (HCR_HOST_NVHE_FLAGS | HCR_TSC) #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H) -#define HCRX_GUEST_FLAGS (HCRX_EL2_SMPME | HCRX_EL2_TCR2En) +#define HCRX_GUEST_FLAGS \ + (HCRX_EL2_SMPME | HCRX_EL2_TCR2En | \ + (cpus_have_final_cap(ARM64_HAS_MOPS) ? (HCRX_EL2_MSCEn | HCRX_EL2_MCE2) : 0)) #define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En) /* TCR_EL2 Registers bits */ diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 3d6725ff0b..78a550537b 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -54,6 +54,11 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu); int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2); int kvm_inject_nested_irq(struct kvm_vcpu *vcpu); +static inline bool vcpu_has_feature(const struct kvm_vcpu *vcpu, int feature) +{ + return test_bit(feature, vcpu->kvm->arch.vcpu_features); +} + #if defined(__KVM_VHE_HYPERVISOR__) || defined(__KVM_NVHE_HYPERVISOR__) static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu) { @@ -62,7 +67,7 @@ static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu) #else static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu) { - return test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features); + return vcpu_has_feature(vcpu, KVM_ARM_VCPU_EL1_32BIT); } #endif @@ -71,14 +76,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu) vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS; if (has_vhe() || has_hvhe()) vcpu->arch.hcr_el2 |= HCR_E2H; - if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) { + if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) { /* route synchronous external abort exceptions to EL2 */ vcpu->arch.hcr_el2 |= HCR_TEA; /* trap error record accesses */ vcpu->arch.hcr_el2 |= HCR_TERR; } - if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) { + if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) { vcpu->arch.hcr_el2 |= HCR_FWB; } else { /* @@ -465,7 +470,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu) static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) { - return vcpu_read_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK; + return __vcpu_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK; } static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) @@ -565,12 +570,6 @@ static __always_inline void kvm_incr_pc(struct kvm_vcpu *vcpu) vcpu_set_flag((v), e); \ } while (0) - -static inline bool vcpu_has_feature(struct kvm_vcpu *vcpu, int feature) -{ - return test_bit(feature, vcpu->arch.features); -} - static __always_inline void kvm_write_cptr_el2(u64 val) { if (has_vhe() || has_hvhe()) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index af06ccb7ee..824f29f049 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -78,7 +78,7 @@ extern unsigned int __ro_after_init kvm_sve_max_vl; int __init kvm_arm_init_sve(void); u32 __attribute_const__ kvm_target_cpu(void); -int kvm_reset_vcpu(struct kvm_vcpu *vcpu); +void kvm_reset_vcpu(struct kvm_vcpu *vcpu); void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu); struct kvm_hyp_memcache { @@ -158,6 +158,16 @@ struct kvm_s2_mmu { phys_addr_t pgd_phys; struct kvm_pgtable *pgt; + /* + * VTCR value used on the host. For a non-NV guest (or a NV + * guest that runs in a context where its own S2 doesn't + * apply), its T0SZ value reflects that of the IPA size. + * + * For a shadow S2 MMU, T0SZ reflects the PARange exposed to + * the guest. + */ + u64 vtcr; + /* The last vcpu id that ran on each physical CPU */ int __percpu *last_vcpu_ran; @@ -202,12 +212,34 @@ struct kvm_protected_vm { struct kvm_hyp_memcache teardown_mc; }; +struct kvm_mpidr_data { + u64 mpidr_mask; + DECLARE_FLEX_ARRAY(u16, cmpidr_to_idx); +}; + +static inline u16 kvm_mpidr_index(struct kvm_mpidr_data *data, u64 mpidr) +{ + unsigned long mask = data->mpidr_mask; + u64 aff = mpidr & MPIDR_HWID_BITMASK; + int nbits, bit, bit_idx = 0; + u16 index = 0; + + /* + * If this looks like RISC-V's BEXT or x86's PEXT + * instructions, it isn't by accident. + */ + nbits = fls(mask); + for_each_set_bit(bit, &mask, nbits) { + index |= (aff & BIT(bit)) >> (bit - bit_idx); + bit_idx++; + } + + return index; +} + struct kvm_arch { struct kvm_s2_mmu mmu; - /* VTCR_EL2 value for this VM */ - u64 vtcr; - /* Interrupt controller */ struct vgic_dist vgic; @@ -239,15 +271,16 @@ struct kvm_arch { #define KVM_ARCH_FLAG_VM_COUNTER_OFFSET 5 /* Timer PPIs made immutable */ #define KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE 6 - /* SMCCC filter initialized for the VM */ -#define KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED 7 /* Initial ID reg values loaded */ -#define KVM_ARCH_FLAG_ID_REGS_INITIALIZED 8 +#define KVM_ARCH_FLAG_ID_REGS_INITIALIZED 7 unsigned long flags; /* VM-wide vCPU feature set */ DECLARE_BITMAP(vcpu_features, KVM_VCPU_MAX_FEATURES); + /* MPIDR to vcpu index mapping, optional */ + struct kvm_mpidr_data *mpidr_data; + /* * VM-wide PMU filter, implemented as a bitmap and big enough for * up to 2^10 events (ARMv8.0) or 2^16 events (ARMv8.1+). @@ -257,6 +290,9 @@ struct kvm_arch { cpumask_var_t supported_cpus; + /* PMCR_EL0.N value for the guest */ + u8 pmcr_n; + /* Hypercall features firmware registers' descriptor */ struct kvm_smccc_features smccc_feat; struct maple_tree smccc_filter; @@ -574,9 +610,6 @@ struct kvm_vcpu_arch { /* Cache some mmu pages needed inside spinlock regions */ struct kvm_mmu_memory_cache mmu_page_cache; - /* feature flags */ - DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES); - /* Virtual SError ESR to restore when HCR_EL2.VSE is set */ u64 vsesr_el2; @@ -1025,7 +1058,7 @@ int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu, extern unsigned int __ro_after_init kvm_arm_vmid_bits; int __init kvm_arm_vmid_alloc_init(void); void __init kvm_arm_vmid_alloc_free(void); -void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid); +bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid); void kvm_arm_vmid_clear_active(void); static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch) @@ -1052,7 +1085,7 @@ static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt) static inline bool kvm_system_needs_idmapped_vectors(void) { - return cpus_have_const_cap(ARM64_SPECTRE_V3A); + return cpus_have_final_cap(ARM64_SPECTRE_V3A); } static inline void kvm_arch_sync_events(struct kvm *kvm) {} @@ -1078,6 +1111,8 @@ int kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm, struct kvm_arm_copy_mte_tags *copy_tags); int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm, struct kvm_arm_counter_offset *offset); +int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm, + struct reg_mask_range *range); /* Guest/host FPSIMD coordination helpers */ int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu); @@ -1109,8 +1144,8 @@ static inline bool kvm_set_pmuserenr(u64 val) } #endif -void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu); -void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu); +void kvm_vcpu_load_vhe(struct kvm_vcpu *vcpu); +void kvm_vcpu_put_vhe(struct kvm_vcpu *vcpu); int __init kvm_set_ipa_limit(void); diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 66efd67ea7..145ce73fc1 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -93,6 +93,8 @@ void __timer_disable_traps(struct kvm_vcpu *vcpu); void __sysreg_save_state_nvhe(struct kvm_cpu_context *ctxt); void __sysreg_restore_state_nvhe(struct kvm_cpu_context *ctxt); #else +void __vcpu_load_switch_sysregs(struct kvm_vcpu *vcpu); +void __vcpu_put_switch_sysregs(struct kvm_vcpu *vcpu); void sysreg_save_host_state_vhe(struct kvm_cpu_context *ctxt); void sysreg_restore_host_state_vhe(struct kvm_cpu_context *ctxt); void sysreg_save_guest_state_vhe(struct kvm_cpu_context *ctxt); @@ -111,11 +113,6 @@ void __fpsimd_save_state(struct user_fpsimd_state *fp_regs); void __fpsimd_restore_state(struct user_fpsimd_state *fp_regs); void __sve_restore_state(void *sve_pffr, u32 *fpsr); -#ifndef __KVM_NVHE_HYPERVISOR__ -void activate_traps_vhe_load(struct kvm_vcpu *vcpu); -void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu); -#endif - u64 __guest_enter(struct kvm_vcpu *vcpu); bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt, u32 func_id); diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index 96a80e8f62..49e0d4b36b 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -150,9 +150,9 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v) */ #define KVM_PHYS_SHIFT (40) -#define kvm_phys_shift(kvm) VTCR_EL2_IPA(kvm->arch.vtcr) -#define kvm_phys_size(kvm) (_AC(1, ULL) << kvm_phys_shift(kvm)) -#define kvm_phys_mask(kvm) (kvm_phys_size(kvm) - _AC(1, ULL)) +#define kvm_phys_shift(mmu) VTCR_EL2_IPA((mmu)->vtcr) +#define kvm_phys_size(mmu) (_AC(1, ULL) << kvm_phys_shift(mmu)) +#define kvm_phys_mask(mmu) (kvm_phys_size(mmu) - _AC(1, ULL)) #include <asm/kvm_pgtable.h> #include <asm/stage2_pgtable.h> @@ -218,22 +218,47 @@ static inline void __clean_dcache_guest_page(void *va, size_t size) * faulting in pages. Furthermore, FWB implies IDC, so cleaning to * PoU is not required either in this case. */ - if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) + if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) return; kvm_flush_dcache_to_poc(va, size); } +static inline size_t __invalidate_icache_max_range(void) +{ + u8 iminline; + u64 ctr; + + asm volatile(ALTERNATIVE_CB("movz %0, #0\n" + "movk %0, #0, lsl #16\n" + "movk %0, #0, lsl #32\n" + "movk %0, #0, lsl #48\n", + ARM64_ALWAYS_SYSTEM, + kvm_compute_final_ctr_el0) + : "=r" (ctr)); + + iminline = SYS_FIELD_GET(CTR_EL0, IminLine, ctr) + 2; + return MAX_DVM_OPS << iminline; +} + static inline void __invalidate_icache_guest_page(void *va, size_t size) { - if (icache_is_aliasing()) { - /* any kind of VIPT cache */ + /* + * VPIPT I-cache maintenance must be done from EL2. See comment in the + * nVHE flavor of __kvm_tlb_flush_vmid_ipa(). + */ + if (icache_is_vpipt() && read_sysreg(CurrentEL) != CurrentEL_EL2) + return; + + /* + * Blow the whole I-cache if it is aliasing (i.e. VIPT) or the + * invalidation range exceeds our arbitrary limit on invadations by + * cache line. + */ + if (icache_is_aliasing() || size > __invalidate_icache_max_range()) icache_inval_all_pou(); - } else if (read_sysreg(CurrentEL) != CurrentEL_EL1 || - !icache_is_vpipt()) { - /* PIPT or VPIPT at EL2 (see comment in __kvm_tlb_flush_vmid_ipa) */ + else icache_inval_pou((unsigned long)va, (unsigned long)va + size); - } } void kvm_set_way_flush(struct kvm_vcpu *vcpu); @@ -299,7 +324,7 @@ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu) static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu, struct kvm_arch *arch) { - write_sysreg(arch->vtcr, vtcr_el2); + write_sysreg(mmu->vtcr, vtcr_el2); write_sysreg(kvm_get_vttbr(mmu), vttbr_el2); /* diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h index fa23cc9c2a..6cec8e9c6c 100644 --- a/arch/arm64/include/asm/kvm_nested.h +++ b/arch/arm64/include/asm/kvm_nested.h @@ -2,13 +2,14 @@ #ifndef __ARM64_KVM_NESTED_H #define __ARM64_KVM_NESTED_H +#include <asm/kvm_emulate.h> #include <linux/kvm_host.h> static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu) { return (!__is_defined(__KVM_NVHE_HYPERVISOR__) && cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) && - test_bit(KVM_ARM_VCPU_HAS_EL2, vcpu->arch.features)); + vcpu_has_feature(vcpu, KVM_ARM_VCPU_HAS_EL2)); } extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index cbbcdc35c4..3129a5819d 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -16,14 +16,9 @@ #include <asm/atomic_lse.h> #include <asm/cpucaps.h> -static __always_inline bool system_uses_lse_atomics(void) -{ - return alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS); -} - #define __lse_ll_sc_body(op, ...) \ ({ \ - system_uses_lse_atomics() ? \ + alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS) ? \ __lse_##op(__VA_ARGS__) : \ __ll_sc_##op(__VA_ARGS__); \ }) @@ -34,8 +29,6 @@ static __always_inline bool system_uses_lse_atomics(void) #else /* CONFIG_ARM64_LSE_ATOMICS */ -static inline bool system_uses_lse_atomics(void) { return false; } - #define __lse_ll_sc_body(op, ...) __ll_sc_##op(__VA_ARGS__) #define ARM64_LSE_ATOMIC_INSN(llsc, lse) llsc diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index 94b68850cb..2fcf51231d 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -57,7 +57,7 @@ typedef struct { static inline bool arm64_kernel_unmapped_at_el0(void) { - return cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0); + return alternative_has_cap_unlikely(ARM64_UNMAP_KERNEL_AT_EL0); } extern void arm64_memblock_init(void); diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index a6fb325424..9ce4200508 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -152,7 +152,7 @@ static inline void cpu_install_ttbr0(phys_addr_t ttbr0, unsigned long t0sz) * Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD, * avoiding the possibility of conflicting TLB entries being allocated. */ -static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) +static inline void __cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap, bool cnp) { typedef void (ttbr_replace_func)(phys_addr_t); extern ttbr_replace_func idmap_cpu_replace_ttbr1; @@ -162,17 +162,8 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) /* phys_to_ttbr() zeros lower 2 bits of ttbr with 52-bit PA */ phys_addr_t ttbr1 = phys_to_ttbr(virt_to_phys(pgdp)); - if (system_supports_cnp() && !WARN_ON(pgdp != lm_alias(swapper_pg_dir))) { - /* - * cpu_replace_ttbr1() is used when there's a boot CPU - * up (i.e. cpufeature framework is not up yet) and - * latter only when we enable CNP via cpufeature's - * enable() callback. - * Also we rely on the system_cpucaps bit being set before - * calling the enable() function. - */ + if (cnp) ttbr1 |= TTBR_CNP_BIT; - } replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1); @@ -189,6 +180,21 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) cpu_uninstall_idmap(); } +static inline void cpu_enable_swapper_cnp(void) +{ + __cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir, true); +} + +static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap) +{ + /* + * Only for early TTBR1 replacement before cpucaps are finalized and + * before we've decided whether to use CNP. + */ + WARN_ON(system_capabilities_finalized()); + __cpu_replace_ttbr1(pgdp, idmap, false); +} + /* * It would be nice to return ASIDs back to the allocator, but unfortunately * that introduces a race with a generation rollover where we could erroneously diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h index bfa6638b4c..79550b22ba 100644 --- a/arch/arm64/include/asm/module.h +++ b/arch/arm64/include/asm/module.h @@ -44,8 +44,7 @@ struct plt_entry { static inline bool is_forbidden_offset_for_adrp(void *place) { - return IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) && - cpus_have_const_cap(ARM64_WORKAROUND_843419) && + return cpus_have_final_cap(ARM64_WORKAROUND_843419) && ((u64)place & 0xfff) >= 0xff8; } diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h index 4cedbaa16f..91fbd5c8a3 100644 --- a/arch/arm64/include/asm/mte.h +++ b/arch/arm64/include/asm/mte.h @@ -90,7 +90,7 @@ static inline bool try_page_mte_tagging(struct page *page) } void mte_zero_clear_page_tags(void *addr); -void mte_sync_tags(pte_t pte); +void mte_sync_tags(pte_t pte, unsigned int nr_pages); void mte_copy_page_tags(void *kto, const void *kfrom); void mte_thread_init_user(void); void mte_thread_switch(struct task_struct *next); @@ -122,7 +122,7 @@ static inline bool try_page_mte_tagging(struct page *page) static inline void mte_zero_clear_page_tags(void *addr) { } -static inline void mte_sync_tags(pte_t pte) +static inline void mte_sync_tags(pte_t pte, unsigned int nr_pages) { } static inline void mte_copy_page_tags(void *kto, const void *kfrom) diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index eed814b00a..e9624f6326 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -75,11 +75,7 @@ extern bool arm64_use_ng_mappings; * If we have userspace only BTI we don't want to mark kernel pages * guarded even if the system does support BTI. */ -#ifdef CONFIG_ARM64_BTI_KERNEL -#define PTE_MAYBE_GP (system_supports_bti() ? PTE_GP : 0) -#else -#define PTE_MAYBE_GP 0 -#endif +#define PTE_MAYBE_GP (system_supports_bti_kernel() ? PTE_GP : 0) #define PAGE_KERNEL __pgprot(_PAGE_KERNEL) #define PAGE_KERNEL_RO __pgprot(_PAGE_KERNEL_RO) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 07bdf5dd8e..79ce70fbb7 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -325,8 +325,7 @@ static inline void __check_safe_pte_update(struct mm_struct *mm, pte_t *ptep, __func__, pte_val(old_pte), pte_val(pte)); } -static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) +static inline void __sync_cache_and_tags(pte_t pte, unsigned int nr_pages) { if (pte_present(pte) && pte_user_exec(pte) && !pte_special(pte)) __sync_icache_dcache(pte); @@ -339,24 +338,22 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, */ if (system_supports_mte() && pte_access_permitted(pte, false) && !pte_special(pte) && pte_tagged(pte)) - mte_sync_tags(pte); - - __check_safe_pte_update(mm, ptep, pte); - - set_pte(ptep, pte); + mte_sync_tags(pte, nr_pages); } -static inline void set_ptes(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte, unsigned int nr) +static inline void set_ptes(struct mm_struct *mm, + unsigned long __always_unused addr, + pte_t *ptep, pte_t pte, unsigned int nr) { page_table_check_ptes_set(mm, ptep, pte, nr); + __sync_cache_and_tags(pte, nr); for (;;) { - __set_pte_at(mm, addr, ptep, pte); + __check_safe_pte_update(mm, ptep, pte); + set_pte(ptep, pte); if (--nr == 0) break; ptep++; - addr += PAGE_SIZE; pte_val(pte) += PAGE_SIZE; } } @@ -531,18 +528,29 @@ static inline pmd_t pmd_mkdevmap(pmd_t pmd) #define pud_pfn(pud) ((__pud_to_phys(pud) & PUD_MASK) >> PAGE_SHIFT) #define pfn_pud(pfn,prot) __pud(__phys_to_pud_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +static inline void __set_pte_at(struct mm_struct *mm, + unsigned long __always_unused addr, + pte_t *ptep, pte_t pte, unsigned int nr) +{ + __sync_cache_and_tags(pte, nr); + __check_safe_pte_update(mm, ptep, pte); + set_pte(ptep, pte); +} + static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, pmd_t pmd) { page_table_check_pmd_set(mm, pmdp, pmd); - return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd)); + return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd), + PMD_SIZE >> PAGE_SHIFT); } static inline void set_pud_at(struct mm_struct *mm, unsigned long addr, pud_t *pudp, pud_t pud) { page_table_check_pud_set(mm, pudp, pud); - return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud)); + return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud), + PUD_SIZE >> PAGE_SHIFT); } #define __p4d_to_phys(p4d) __pte_to_phys(p4d_pte(p4d)) diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h index 9b31e6d0da..efb13112b4 100644 --- a/arch/arm64/include/asm/smp.h +++ b/arch/arm64/include/asm/smp.h @@ -89,9 +89,9 @@ extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL -extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask); +extern void arch_send_wakeup_ipi(unsigned int cpu); #else -static inline void arch_send_wakeup_ipi_mask(const struct cpumask *mask) +static inline void arch_send_wakeup_ipi(unsigned int cpu) { BUILD_BUG(); } diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h index 9cc5014504..06c357d83b 100644 --- a/arch/arm64/include/asm/spectre.h +++ b/arch/arm64/include/asm/spectre.h @@ -73,7 +73,7 @@ static __always_inline void arm64_apply_bp_hardening(void) { struct bp_hardening_data *d; - if (!cpus_have_const_cap(ARM64_SPECTRE_V2)) + if (!alternative_has_cap_unlikely(ARM64_SPECTRE_V2)) return; d = this_cpu_ptr(&bp_hardening_data); diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h index c8dca8ae35..23d27623e4 100644 --- a/arch/arm64/include/asm/stage2_pgtable.h +++ b/arch/arm64/include/asm/stage2_pgtable.h @@ -21,13 +21,13 @@ * (IPA_SHIFT - 4). */ #define stage2_pgtable_levels(ipa) ARM64_HW_PGTABLE_LEVELS((ipa) - 4) -#define kvm_stage2_levels(kvm) VTCR_EL2_LVLS(kvm->arch.vtcr) +#define kvm_stage2_levels(mmu) VTCR_EL2_LVLS((mmu)->vtcr) /* * kvm_mmmu_cache_min_pages() is the number of pages required to install * a stage-2 translation. We pre-allocate the entry level page table at * the VM creation. */ -#define kvm_mmu_cache_min_pages(kvm) (kvm_stage2_levels(kvm) - 1) +#define kvm_mmu_cache_min_pages(mmu) (kvm_stage2_levels(mmu) - 1) #endif /* __ARM64_S2_PGTABLE_H_ */ diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h index 7a0e7b59be..abb57bc543 100644 --- a/arch/arm64/include/asm/syscall_wrapper.h +++ b/arch/arm64/include/asm/syscall_wrapper.h @@ -51,7 +51,6 @@ ALLOW_ERROR_INJECTION(__arm64_sys##name, ERRNO); \ static long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \ static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ - asmlinkage long __arm64_sys##name(const struct pt_regs *regs); \ asmlinkage long __arm64_sys##name(const struct pt_regs *regs) \ { \ return __se_sys##name(SC_ARM64_REGS_TO_ARGS(x,__VA_ARGS__)); \ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 38296579a4..5e65f51c10 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -270,6 +270,8 @@ /* ETM */ #define SYS_TRCOSLAR sys_reg(2, 1, 1, 0, 4) +#define SYS_BRBCR_EL2 sys_reg(2, 4, 9, 0, 0) + #define SYS_MIDR_EL1 sys_reg(3, 0, 0, 0, 0) #define SYS_MPIDR_EL1 sys_reg(3, 0, 0, 0, 5) #define SYS_REVIDR_EL1 sys_reg(3, 0, 0, 0, 6) @@ -484,6 +486,7 @@ #define SYS_SCTLR_EL2 sys_reg(3, 4, 1, 0, 0) #define SYS_ACTLR_EL2 sys_reg(3, 4, 1, 0, 1) +#define SYS_SCTLR2_EL2 sys_reg(3, 4, 1, 0, 3) #define SYS_HCR_EL2 sys_reg(3, 4, 1, 1, 0) #define SYS_MDCR_EL2 sys_reg(3, 4, 1, 1, 1) #define SYS_CPTR_EL2 sys_reg(3, 4, 1, 1, 2) @@ -497,10 +500,15 @@ #define SYS_VTCR_EL2 sys_reg(3, 4, 2, 1, 2) #define SYS_TRFCR_EL2 sys_reg(3, 4, 1, 2, 1) +#define SYS_VNCR_EL2 sys_reg(3, 4, 2, 2, 0) #define SYS_HAFGRTR_EL2 sys_reg(3, 4, 3, 1, 6) #define SYS_SPSR_EL2 sys_reg(3, 4, 4, 0, 0) #define SYS_ELR_EL2 sys_reg(3, 4, 4, 0, 1) #define SYS_SP_EL1 sys_reg(3, 4, 4, 1, 0) +#define SYS_SPSR_irq sys_reg(3, 4, 4, 3, 0) +#define SYS_SPSR_abt sys_reg(3, 4, 4, 3, 1) +#define SYS_SPSR_und sys_reg(3, 4, 4, 3, 2) +#define SYS_SPSR_fiq sys_reg(3, 4, 4, 3, 3) #define SYS_IFSR32_EL2 sys_reg(3, 4, 5, 0, 1) #define SYS_AFSR0_EL2 sys_reg(3, 4, 5, 1, 0) #define SYS_AFSR1_EL2 sys_reg(3, 4, 5, 1, 1) @@ -514,6 +522,18 @@ #define SYS_MAIR_EL2 sys_reg(3, 4, 10, 2, 0) #define SYS_AMAIR_EL2 sys_reg(3, 4, 10, 3, 0) +#define SYS_MPAMHCR_EL2 sys_reg(3, 4, 10, 4, 0) +#define SYS_MPAMVPMV_EL2 sys_reg(3, 4, 10, 4, 1) +#define SYS_MPAM2_EL2 sys_reg(3, 4, 10, 5, 0) +#define __SYS__MPAMVPMx_EL2(x) sys_reg(3, 4, 10, 6, x) +#define SYS_MPAMVPM0_EL2 __SYS__MPAMVPMx_EL2(0) +#define SYS_MPAMVPM1_EL2 __SYS__MPAMVPMx_EL2(1) +#define SYS_MPAMVPM2_EL2 __SYS__MPAMVPMx_EL2(2) +#define SYS_MPAMVPM3_EL2 __SYS__MPAMVPMx_EL2(3) +#define SYS_MPAMVPM4_EL2 __SYS__MPAMVPMx_EL2(4) +#define SYS_MPAMVPM5_EL2 __SYS__MPAMVPMx_EL2(5) +#define SYS_MPAMVPM6_EL2 __SYS__MPAMVPMx_EL2(6) +#define SYS_MPAMVPM7_EL2 __SYS__MPAMVPMx_EL2(7) #define SYS_VBAR_EL2 sys_reg(3, 4, 12, 0, 0) #define SYS_RVBAR_EL2 sys_reg(3, 4, 12, 0, 1) @@ -562,24 +582,49 @@ #define SYS_CONTEXTIDR_EL2 sys_reg(3, 4, 13, 0, 1) #define SYS_TPIDR_EL2 sys_reg(3, 4, 13, 0, 2) +#define SYS_SCXTNUM_EL2 sys_reg(3, 4, 13, 0, 7) + +#define __AMEV_op2(m) (m & 0x7) +#define __AMEV_CRm(n, m) (n | ((m & 0x8) >> 3)) +#define __SYS__AMEVCNTVOFF0n_EL2(m) sys_reg(3, 4, 13, __AMEV_CRm(0x8, m), __AMEV_op2(m)) +#define SYS_AMEVCNTVOFF0n_EL2(m) __SYS__AMEVCNTVOFF0n_EL2(m) +#define __SYS__AMEVCNTVOFF1n_EL2(m) sys_reg(3, 4, 13, __AMEV_CRm(0xA, m), __AMEV_op2(m)) +#define SYS_AMEVCNTVOFF1n_EL2(m) __SYS__AMEVCNTVOFF1n_EL2(m) #define SYS_CNTVOFF_EL2 sys_reg(3, 4, 14, 0, 3) #define SYS_CNTHCTL_EL2 sys_reg(3, 4, 14, 1, 0) +#define SYS_CNTHP_TVAL_EL2 sys_reg(3, 4, 14, 2, 0) +#define SYS_CNTHP_CTL_EL2 sys_reg(3, 4, 14, 2, 1) +#define SYS_CNTHP_CVAL_EL2 sys_reg(3, 4, 14, 2, 2) +#define SYS_CNTHV_TVAL_EL2 sys_reg(3, 4, 14, 3, 0) +#define SYS_CNTHV_CTL_EL2 sys_reg(3, 4, 14, 3, 1) +#define SYS_CNTHV_CVAL_EL2 sys_reg(3, 4, 14, 3, 2) /* VHE encodings for architectural EL0/1 system registers */ +#define SYS_BRBCR_EL12 sys_reg(2, 5, 9, 0, 0) #define SYS_SCTLR_EL12 sys_reg(3, 5, 1, 0, 0) +#define SYS_CPACR_EL12 sys_reg(3, 5, 1, 0, 2) +#define SYS_SCTLR2_EL12 sys_reg(3, 5, 1, 0, 3) +#define SYS_ZCR_EL12 sys_reg(3, 5, 1, 2, 0) +#define SYS_TRFCR_EL12 sys_reg(3, 5, 1, 2, 1) +#define SYS_SMCR_EL12 sys_reg(3, 5, 1, 2, 6) #define SYS_TTBR0_EL12 sys_reg(3, 5, 2, 0, 0) #define SYS_TTBR1_EL12 sys_reg(3, 5, 2, 0, 1) #define SYS_TCR_EL12 sys_reg(3, 5, 2, 0, 2) +#define SYS_TCR2_EL12 sys_reg(3, 5, 2, 0, 3) #define SYS_SPSR_EL12 sys_reg(3, 5, 4, 0, 0) #define SYS_ELR_EL12 sys_reg(3, 5, 4, 0, 1) #define SYS_AFSR0_EL12 sys_reg(3, 5, 5, 1, 0) #define SYS_AFSR1_EL12 sys_reg(3, 5, 5, 1, 1) #define SYS_ESR_EL12 sys_reg(3, 5, 5, 2, 0) #define SYS_TFSR_EL12 sys_reg(3, 5, 5, 6, 0) +#define SYS_FAR_EL12 sys_reg(3, 5, 6, 0, 0) +#define SYS_PMSCR_EL12 sys_reg(3, 5, 9, 9, 0) #define SYS_MAIR_EL12 sys_reg(3, 5, 10, 2, 0) #define SYS_AMAIR_EL12 sys_reg(3, 5, 10, 3, 0) #define SYS_VBAR_EL12 sys_reg(3, 5, 12, 0, 0) +#define SYS_CONTEXTIDR_EL12 sys_reg(3, 5, 13, 0, 1) +#define SYS_SCXTNUM_EL12 sys_reg(3, 5, 13, 0, 7) #define SYS_CNTKCTL_EL12 sys_reg(3, 5, 14, 1, 0) #define SYS_CNTP_TVAL_EL02 sys_reg(3, 5, 14, 2, 0) #define SYS_CNTP_CTL_EL02 sys_reg(3, 5, 14, 2, 1) diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index 2c29239d05..846c563689 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -96,7 +96,10 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp, unsigned long addr) { - tlb_remove_ptdesc(tlb, virt_to_ptdesc(pudp)); + struct ptdesc *ptdesc = virt_to_ptdesc(pudp); + + pagetable_pud_dtor(ptdesc); + tlb_remove_ptdesc(tlb, ptdesc); } #endif diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index b149cf9f91..bb2c2833a9 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -105,7 +105,7 @@ static inline unsigned long get_trans_granule(void) #define __tlbi_level(op, addr, level) do { \ u64 arg = addr; \ \ - if (cpus_have_const_cap(ARM64_HAS_ARMv8_4_TTL) && \ + if (alternative_has_cap_unlikely(ARM64_HAS_ARMv8_4_TTL) && \ level) { \ u64 ttl = level & 3; \ ttl |= get_trans_granule() << 2; \ @@ -284,16 +284,15 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm) { -#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI /* * TLB flush deferral is not required on systems which are affected by * ARM64_WORKAROUND_REPEAT_TLBI, as __tlbi()/__tlbi_user() implementation * will have two consecutive TLBI instructions with a dsb(ish) in between * defeating the purpose (i.e save overall 'dsb ish' cost). */ - if (unlikely(cpus_have_const_cap(ARM64_WORKAROUND_REPEAT_TLBI))) + if (alternative_has_cap_unlikely(ARM64_WORKAROUND_REPEAT_TLBI)) return false; -#endif + return true; } @@ -333,7 +332,7 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch) * This is meant to avoid soft lock-ups on large TLB flushing ranges and not * necessarily a performance improvement. */ -#define MAX_TLBI_OPS PTRS_PER_PTE +#define MAX_DVM_OPS PTRS_PER_PTE /* * __flush_tlb_range_op - Perform TLBI operation upon a range @@ -413,12 +412,12 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, /* * When not uses TLB range ops, we can handle up to - * (MAX_TLBI_OPS - 1) pages; + * (MAX_DVM_OPS - 1) pages; * When uses TLB range ops, we can handle up to * (MAX_TLBI_RANGE_PAGES - 1) pages. */ if ((!system_supports_tlb_range() && - (end - start) >= (MAX_TLBI_OPS * stride)) || + (end - start) >= (MAX_DVM_OPS * stride)) || pages >= MAX_TLBI_RANGE_PAGES) { flush_tlb_mm(vma->vm_mm); return; @@ -451,7 +450,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end { unsigned long addr; - if ((end - start) > (MAX_TLBI_OPS * PAGE_SIZE)) { + if ((end - start) > (MAX_DVM_OPS * PAGE_SIZE)) { flush_tlb_all(); return; } diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h index d66dfb3a72..eefe766d61 100644 --- a/arch/arm64/include/asm/traps.h +++ b/arch/arm64/include/asm/traps.h @@ -9,10 +9,9 @@ #include <linux/list.h> #include <asm/esr.h> +#include <asm/ptrace.h> #include <asm/sections.h> -struct pt_regs; - #ifdef CONFIG_ARMV8_DEPRECATED bool try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn); #else @@ -101,4 +100,55 @@ static inline unsigned long arm64_ras_serror_get_severity(unsigned long esr) bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr); void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr); + +static inline void arm64_mops_reset_regs(struct user_pt_regs *regs, unsigned long esr) +{ + bool wrong_option = esr & ESR_ELx_MOPS_ISS_WRONG_OPTION; + bool option_a = esr & ESR_ELx_MOPS_ISS_OPTION_A; + int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr); + int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr); + int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr); + unsigned long dst, src, size; + + dst = regs->regs[dstreg]; + src = regs->regs[srcreg]; + size = regs->regs[sizereg]; + + /* + * Put the registers back in the original format suitable for a + * prologue instruction, using the generic return routine from the + * Arm ARM (DDI 0487I.a) rules CNTMJ and MWFQH. + */ + if (esr & ESR_ELx_MOPS_ISS_MEM_INST) { + /* SET* instruction */ + if (option_a ^ wrong_option) { + /* Format is from Option A; forward set */ + regs->regs[dstreg] = dst + size; + regs->regs[sizereg] = -size; + } + } else { + /* CPY* instruction */ + if (!(option_a ^ wrong_option)) { + /* Format is from Option B */ + if (regs->pstate & PSR_N_BIT) { + /* Backward copy */ + regs->regs[dstreg] = dst - size; + regs->regs[srcreg] = src - size; + } + } else { + /* Format is from Option A */ + if (size & BIT(63)) { + /* Forward copy */ + regs->regs[dstreg] = dst + size; + regs->regs[srcreg] = src + size; + regs->regs[sizereg] = -size; + } + } + } + + if (esr & ESR_ELx_MOPS_ISS_FROM_EPILOGUE) + regs->pc -= 8; + else + regs->pc -= 4; +} #endif diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index bd77253b62..531effca5f 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -39,7 +39,7 @@ #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5) #define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 453 +#define __NR_compat_syscalls 457 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 78b68311ec..9f7c1bf995 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -508,8 +508,8 @@ __SYSCALL(__NR_io_submit, compat_sys_io_submit) __SYSCALL(__NR_io_cancel, sys_io_cancel) #define __NR_exit_group 248 __SYSCALL(__NR_exit_group, sys_exit_group) -#define __NR_lookup_dcookie 249 -__SYSCALL(__NR_lookup_dcookie, compat_sys_lookup_dcookie) + /* 249 was lookup_dcookie */ +__SYSCALL(249, sys_ni_syscall) #define __NR_epoll_create 250 __SYSCALL(__NR_epoll_create, sys_epoll_create) #define __NR_epoll_ctl 251 @@ -911,6 +911,14 @@ __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) __SYSCALL(__NR_cachestat, sys_cachestat) #define __NR_fchmodat2 452 __SYSCALL(__NR_fchmodat2, sys_fchmodat2) +#define __NR_map_shadow_stack 453 +__SYSCALL(__NR_map_shadow_stack, sys_map_shadow_stack) +#define __NR_futex_wake 454 +__SYSCALL(__NR_futex_wake, sys_futex_wake) +#define __NR_futex_wait 455 +__SYSCALL(__NR_futex_wait, sys_futex_wait) +#define __NR_futex_requeue 456 +__SYSCALL(__NR_futex_requeue, sys_futex_requeue) /* * Please add new compat syscalls above this comment and update diff --git a/arch/arm64/include/asm/vectors.h b/arch/arm64/include/asm/vectors.h index bc9a2145f4..b815d8f2c0 100644 --- a/arch/arm64/include/asm/vectors.h +++ b/arch/arm64/include/asm/vectors.h @@ -62,7 +62,7 @@ DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector); static inline const char * arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot) { - if (arm64_kernel_unmapped_at_el0()) + if (cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0)) return (char *)(TRAMP_VALIAS + SZ_2K * slot); WARN_ON_ONCE(slot == EL1_VECTOR_KPTI); diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index 53026f45a5..5023599fa2 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -104,5 +104,8 @@ #define HWCAP2_SME_F16F16 (1UL << 42) #define HWCAP2_MOPS (1UL << 43) #define HWCAP2_HBC (1UL << 44) +#define HWCAP2_SVE_B16B16 (1UL << 45) +#define HWCAP2_LRCPC3 (1UL << 46) +#define HWCAP2_LSE128 (1UL << 47) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index f7ddd73a8c..89d2fc872d 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -505,6 +505,38 @@ struct kvm_smccc_filter { #define KVM_HYPERCALL_EXIT_SMC (1U << 0) #define KVM_HYPERCALL_EXIT_16BIT (1U << 1) +/* + * Get feature ID registers userspace writable mask. + * + * From DDI0487J.a, D19.2.66 ("ID_AA64MMFR2_EL1, AArch64 Memory Model + * Feature Register 2"): + * + * "The Feature ID space is defined as the System register space in + * AArch64 with op0==3, op1=={0, 1, 3}, CRn==0, CRm=={0-7}, + * op2=={0-7}." + * + * This covers all currently known R/O registers that indicate + * anything useful feature wise, including the ID registers. + * + * If we ever need to introduce a new range, it will be described as + * such in the range field. + */ +#define KVM_ARM_FEATURE_ID_RANGE_IDX(op0, op1, crn, crm, op2) \ + ({ \ + __u64 __op1 = (op1) & 3; \ + __op1 -= (__op1 == 3); \ + (__op1 << 6 | ((crm) & 7) << 3 | (op2)); \ + }) + +#define KVM_ARM_FEATURE_ID_RANGE 0 +#define KVM_ARM_FEATURE_ID_RANGE_SIZE (3 * 8 * 8) + +struct reg_mask_range { + __u64 addr; /* Pointer to mask array */ + __u32 range; /* Requested range */ + __u32 reserved[13]; +}; + #endif #endif /* __ARM_KVM_H__ */ diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c index b1990e38ae..e1be29e608 100644 --- a/arch/arm64/kernel/acpi_parking_protocol.c +++ b/arch/arm64/kernel/acpi_parking_protocol.c @@ -103,7 +103,7 @@ static int acpi_parking_protocol_cpu_boot(unsigned int cpu) &mailbox->entry_point); writel_relaxed(cpu_entry->gic_cpu_id, &mailbox->cpu_id); - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + arch_send_wakeup_ipi(cpu); return 0; } diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index e459cfd337..dd6ce86d43 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -52,10 +52,8 @@ struct insn_emulation { int min; int max; - /* - * sysctl for this emulation + a sentinal entry. - */ - struct ctl_table sysctl[2]; + /* sysctl for this emulation */ + struct ctl_table sysctl; }; #define ARM_OPCODE_CONDTEST_FAIL 0 @@ -558,7 +556,7 @@ static void __init register_insn_emulation(struct insn_emulation *insn) update_insn_emulation_mode(insn, INSN_UNDEF); if (insn->status != INSN_UNAVAILABLE) { - sysctl = &insn->sysctl[0]; + sysctl = &insn->sysctl; sysctl->mode = 0644; sysctl->maxlen = sizeof(int); diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 87787a012b..76b8dd3709 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -121,22 +121,6 @@ cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0); } -static DEFINE_RAW_SPINLOCK(reg_user_mask_modification); -static void __maybe_unused -cpu_clear_bf16_from_user_emulation(const struct arm64_cpu_capabilities *__unused) -{ - struct arm64_ftr_reg *regp; - - regp = get_arm64_ftr_reg(SYS_ID_AA64ISAR1_EL1); - if (!regp) - return; - - raw_spin_lock(®_user_mask_modification); - if (regp->user_mask & ID_AA64ISAR1_EL1_BF16_MASK) - regp->user_mask &= ~ID_AA64ISAR1_EL1_BF16_MASK; - raw_spin_unlock(®_user_mask_modification); -} - #define CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max) \ .matches = is_affected_midr_range, \ .midr_range = MIDR_RANGE(model, v_min, r_min, v_max, r_max) @@ -390,6 +374,7 @@ static const struct midr_range erratum_1463225[] = { static const struct midr_range trbe_overwrite_fill_mode_cpus[] = { #ifdef CONFIG_ARM64_ERRATUM_2139208 MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2), + MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100), #endif #ifdef CONFIG_ARM64_ERRATUM_2119858 MIDR_ALL_VERSIONS(MIDR_CORTEX_A710), @@ -403,6 +388,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = { static const struct midr_range tsb_flush_fail_cpus[] = { #ifdef CONFIG_ARM64_ERRATUM_2067961 MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2), + MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100), #endif #ifdef CONFIG_ARM64_ERRATUM_2054223 MIDR_ALL_VERSIONS(MIDR_CORTEX_A710), @@ -415,6 +401,7 @@ static const struct midr_range tsb_flush_fail_cpus[] = { static struct midr_range trbe_write_out_of_range_cpus[] = { #ifdef CONFIG_ARM64_ERRATUM_2253138 MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2), + MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100), #endif #ifdef CONFIG_ARM64_ERRATUM_2224489 MIDR_ALL_VERSIONS(MIDR_CORTEX_A710), @@ -740,7 +727,6 @@ const struct arm64_cpu_capabilities arm64_errata[] = { /* Cortex-A510 r0p0 - r1p1 */ ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1), MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)), - .cpu_enable = cpu_clear_bf16_from_user_emulation, }, #endif #ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 444a73c2e6..91d2d67149 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -279,6 +279,8 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = { ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_B16B16_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, 0), @@ -611,18 +613,6 @@ static const struct arm64_ftr_bits ftr_id_dfr1[] = { ARM64_FTR_END, }; -static const struct arm64_ftr_bits ftr_zcr[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, - ZCR_ELx_LEN_SHIFT, ZCR_ELx_LEN_WIDTH, 0), /* LEN */ - ARM64_FTR_END, -}; - -static const struct arm64_ftr_bits ftr_smcr[] = { - ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, - SMCR_ELx_LEN_SHIFT, SMCR_ELx_LEN_WIDTH, 0), /* LEN */ - ARM64_FTR_END, -}; - /* * Common ftr bits for a 32bit register with all hidden, strict * attributes, with 4bit feature fields and a default safe value of @@ -735,10 +725,6 @@ static const struct __ftr_reg_entry { ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2), ARM64_FTR_REG(SYS_ID_AA64MMFR3_EL1, ftr_id_aa64mmfr3), - /* Op1 = 0, CRn = 1, CRm = 2 */ - ARM64_FTR_REG(SYS_ZCR_EL1, ftr_zcr), - ARM64_FTR_REG(SYS_SMCR_EL1, ftr_smcr), - /* Op1 = 1, CRn = 0, CRm = 0 */ ARM64_FTR_REG(SYS_GMID_EL1, ftr_gmid), @@ -1013,6 +999,37 @@ static void init_32bit_cpu_features(struct cpuinfo_32bit *info) init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2); } +#ifdef CONFIG_ARM64_PSEUDO_NMI +static bool enable_pseudo_nmi; + +static int __init early_enable_pseudo_nmi(char *p) +{ + return kstrtobool(p, &enable_pseudo_nmi); +} +early_param("irqchip.gicv3_pseudo_nmi", early_enable_pseudo_nmi); + +static __init void detect_system_supports_pseudo_nmi(void) +{ + struct device_node *np; + + if (!enable_pseudo_nmi) + return; + + /* + * Detect broken MediaTek firmware that doesn't properly save and + * restore GIC priorities. + */ + np = of_find_compatible_node(NULL, NULL, "arm,gic-v3"); + if (np && of_property_read_bool(np, "mediatek,broken-save-restore-fw")) { + pr_info("Pseudo-NMI disabled due to MediaTek Chromebook GICR save problem\n"); + enable_pseudo_nmi = false; + } + of_node_put(np); +} +#else /* CONFIG_ARM64_PSEUDO_NMI */ +static inline void detect_system_supports_pseudo_nmi(void) { } +#endif + void __init init_cpu_features(struct cpuinfo_arm64 *info) { /* Before we start using the tables, make sure it is sorted */ @@ -1040,22 +1057,26 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info) if (IS_ENABLED(CONFIG_ARM64_SVE) && id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) { - info->reg_zcr = read_zcr_features(); - init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr); + unsigned long cpacr = cpacr_save_enable_kernel_sve(); + vec_init_vq_map(ARM64_VEC_SVE); + + cpacr_restore(cpacr); } if (IS_ENABLED(CONFIG_ARM64_SME) && id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) { - info->reg_smcr = read_smcr_features(); + unsigned long cpacr = cpacr_save_enable_kernel_sme(); + /* * We mask out SMPS since even if the hardware * supports priorities the kernel does not at present * and we block access to them. */ info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS; - init_cpu_ftr_reg(SYS_SMCR_EL1, info->reg_smcr); vec_init_vq_map(ARM64_VEC_SME); + + cpacr_restore(cpacr); } if (id_aa64pfr1_mte(info->reg_id_aa64pfr1)) @@ -1068,6 +1089,13 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info) init_cpucap_indirect_list(); /* + * Detect broken pseudo-NMI. Must be called _before_ the call to + * setup_boot_cpu_capabilities() since it interacts with + * can_use_gic_priorities(). + */ + detect_system_supports_pseudo_nmi(); + + /* * Detect and enable early CPU capabilities based on the boot CPU, * after we have initialised the CPU feature infrastructure. */ @@ -1289,32 +1317,34 @@ void update_cpu_features(int cpu, taint |= check_update_ftr_reg(SYS_ID_AA64SMFR0_EL1, cpu, info->reg_id_aa64smfr0, boot->reg_id_aa64smfr0); + /* Probe vector lengths */ if (IS_ENABLED(CONFIG_ARM64_SVE) && id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) { - info->reg_zcr = read_zcr_features(); - taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu, - info->reg_zcr, boot->reg_zcr); + if (!system_capabilities_finalized()) { + unsigned long cpacr = cpacr_save_enable_kernel_sve(); - /* Probe vector lengths */ - if (!system_capabilities_finalized()) vec_update_vq_map(ARM64_VEC_SVE); + + cpacr_restore(cpacr); + } } if (IS_ENABLED(CONFIG_ARM64_SME) && id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) { - info->reg_smcr = read_smcr_features(); + unsigned long cpacr = cpacr_save_enable_kernel_sme(); + /* * We mask out SMPS since even if the hardware * supports priorities the kernel does not at present * and we block access to them. */ info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS; - taint |= check_update_ftr_reg(SYS_SMCR_EL1, cpu, - info->reg_smcr, boot->reg_smcr); /* Probe vector lengths */ if (!system_capabilities_finalized()) vec_update_vq_map(ARM64_VEC_SME); + + cpacr_restore(cpacr); } /* @@ -1564,14 +1594,6 @@ static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int _ MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK)); } -static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unused) -{ - u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); - - return cpuid_feature_extract_signed_field(pfr0, - ID_AA64PFR0_EL1_FP_SHIFT) < 0; -} - static bool has_cache_idc(const struct arm64_cpu_capabilities *entry, int scope) { @@ -1621,7 +1643,7 @@ has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope) if (is_kdump_kernel()) return false; - if (cpus_have_const_cap(ARM64_WORKAROUND_NVIDIA_CARMEL_CNP)) + if (cpus_have_cap(ARM64_WORKAROUND_NVIDIA_CARMEL_CNP)) return false; return has_cpuid_feature(entry, scope); @@ -1754,16 +1776,15 @@ void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt, phys_addr_t size, pgprot_t prot, phys_addr_t (*pgtable_alloc)(int), int flags); -static phys_addr_t kpti_ng_temp_alloc; +static phys_addr_t __initdata kpti_ng_temp_alloc; -static phys_addr_t kpti_ng_pgd_alloc(int shift) +static phys_addr_t __init kpti_ng_pgd_alloc(int shift) { kpti_ng_temp_alloc -= PAGE_SIZE; return kpti_ng_temp_alloc; } -static void -kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) +static int __init __kpti_install_ng_mappings(void *__unused) { typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long); extern kpti_remap_fn idmap_kpti_install_ng_mappings; @@ -1776,20 +1797,6 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) pgd_t *kpti_ng_temp_pgd; u64 alloc = 0; - if (__this_cpu_read(this_cpu_vector) == vectors) { - const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI); - - __this_cpu_write(this_cpu_vector, v); - } - - /* - * We don't need to rewrite the page-tables if either we've done - * it already or we have KASLR enabled and therefore have not - * created any global mappings at all. - */ - if (arm64_use_ng_mappings) - return; - remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings); if (!cpu) { @@ -1826,14 +1833,43 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) free_pages(alloc, order); arm64_use_ng_mappings = true; } + + return 0; +} + +static void __init kpti_install_ng_mappings(void) +{ + /* Check whether KPTI is going to be used */ + if (!cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0)) + return; + + /* + * We don't need to rewrite the page-tables if either we've done + * it already or we have KASLR enabled and therefore have not + * created any global mappings at all. + */ + if (arm64_use_ng_mappings) + return; + + stop_machine(__kpti_install_ng_mappings, NULL, cpu_online_mask); } + #else -static void -kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) +static inline void kpti_install_ng_mappings(void) { } #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */ +static void cpu_enable_kpti(struct arm64_cpu_capabilities const *cap) +{ + if (__this_cpu_read(this_cpu_vector) == vectors) { + const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI); + + __this_cpu_write(this_cpu_vector, v); + } + +} + static int __init parse_kpti(char *str) { bool enabled; @@ -1848,6 +1884,8 @@ static int __init parse_kpti(char *str) early_param("kpti", parse_kpti); #ifdef CONFIG_ARM64_HW_AFDBM +static struct cpumask dbm_cpus __read_mostly; + static inline void __cpu_enable_hw_dbm(void) { u64 tcr = read_sysreg(tcr_el1) | TCR_HD; @@ -1883,35 +1921,22 @@ static bool cpu_can_use_dbm(const struct arm64_cpu_capabilities *cap) static void cpu_enable_hw_dbm(struct arm64_cpu_capabilities const *cap) { - if (cpu_can_use_dbm(cap)) + if (cpu_can_use_dbm(cap)) { __cpu_enable_hw_dbm(); + cpumask_set_cpu(smp_processor_id(), &dbm_cpus); + } } static bool has_hw_dbm(const struct arm64_cpu_capabilities *cap, int __unused) { - static bool detected = false; /* * DBM is a non-conflicting feature. i.e, the kernel can safely * run a mix of CPUs with and without the feature. So, we * unconditionally enable the capability to allow any late CPU * to use the feature. We only enable the control bits on the - * CPU, if it actually supports. - * - * We have to make sure we print the "feature" detection only - * when at least one CPU actually uses it. So check if this CPU - * can actually use it and print the message exactly once. - * - * This is safe as all CPUs (including secondary CPUs - due to the - * LOCAL_CPU scope - and the hotplugged CPUs - via verification) - * goes through the "matches" check exactly once. Also if a CPU - * matches the criteria, it is guaranteed that the CPU will turn - * the DBM on, as the capability is unconditionally enabled. + * CPU, if it is supported. */ - if (!detected && cpu_can_use_dbm(cap)) { - detected = true; - pr_info("detected: Hardware dirty bit management\n"); - } return true; } @@ -1944,8 +1969,6 @@ int get_cpu_with_amu_feat(void) static void cpu_amu_enable(struct arm64_cpu_capabilities const *cap) { if (has_cpuid_feature(cap, SCOPE_LOCAL_CPU)) { - pr_info("detected CPU%d: Activity Monitors Unit (AMU)\n", - smp_processor_id()); cpumask_set_cpu(smp_processor_id(), &amu_cpus); /* 0 reference values signal broken/disabled counters */ @@ -2104,14 +2127,6 @@ static void cpu_enable_e0pd(struct arm64_cpu_capabilities const *cap) #endif /* CONFIG_ARM64_E0PD */ #ifdef CONFIG_ARM64_PSEUDO_NMI -static bool enable_pseudo_nmi; - -static int __init early_enable_pseudo_nmi(char *p) -{ - return kstrtobool(p, &enable_pseudo_nmi); -} -early_param("irqchip.gicv3_pseudo_nmi", early_enable_pseudo_nmi); - static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry, int scope) { @@ -2190,12 +2205,23 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap) } #endif /* CONFIG_ARM64_MTE */ +static void user_feature_fixup(void) +{ + if (cpus_have_cap(ARM64_WORKAROUND_2658417)) { + struct arm64_ftr_reg *regp; + + regp = get_arm64_ftr_reg(SYS_ID_AA64ISAR1_EL1); + if (regp) + regp->user_mask &= ~ID_AA64ISAR1_EL1_BF16_MASK; + } +} + static void elf_hwcap_fixup(void) { -#ifdef CONFIG_ARM64_ERRATUM_1742098 - if (cpus_have_const_cap(ARM64_WORKAROUND_1742098)) +#ifdef CONFIG_COMPAT + if (cpus_have_cap(ARM64_WORKAROUND_1742098)) compat_elf_hwcap2 &= ~COMPAT_HWCAP2_AES; -#endif /* ARM64_ERRATUM_1742098 */ +#endif /* CONFIG_COMPAT */ } #ifdef CONFIG_KVM @@ -2351,7 +2377,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "Kernel page table isolation (KPTI)", .capability = ARM64_UNMAP_KERNEL_AT_EL0, .type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE, - .cpu_enable = kpti_install_ng_mappings, + .cpu_enable = cpu_enable_kpti, .matches = unmap_kernel_at_el0, /* * The ID feature fields below are used to indicate that @@ -2361,11 +2387,11 @@ static const struct arm64_cpu_capabilities arm64_features[] = { ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, CSV3, IMP) }, { - /* FP/SIMD is not implemented */ - .capability = ARM64_HAS_NO_FPSIMD, - .type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE, - .min_field_value = 0, - .matches = has_no_fpsimd, + .capability = ARM64_HAS_FPSIMD, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_cpuid_feature, + .cpu_enable = cpu_enable_fpsimd, + ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, FP, IMP) }, #ifdef CONFIG_ARM64_PMEM { @@ -2388,7 +2414,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "Scalable Vector Extension", .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SVE, - .cpu_enable = sve_kernel_enable, + .cpu_enable = cpu_enable_sve, .matches = has_cpuid_feature, ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, SVE, IMP) }, @@ -2405,16 +2431,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = { #endif /* CONFIG_ARM64_RAS_EXTN */ #ifdef CONFIG_ARM64_AMU_EXTN { - /* - * The feature is enabled by default if CONFIG_ARM64_AMU_EXTN=y. - * Therefore, don't provide .desc as we don't want the detection - * message to be shown until at least one CPU is detected to - * support the feature. - */ + .desc = "Activity Monitors Unit (AMU)", .capability = ARM64_HAS_AMU_EXTN, .type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE, .matches = has_amu, .cpu_enable = cpu_amu_enable, + .cpus = &amu_cpus, ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, AMU, IMP) }, #endif /* CONFIG_ARM64_AMU_EXTN */ @@ -2454,18 +2476,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = { }, #ifdef CONFIG_ARM64_HW_AFDBM { - /* - * Since we turn this on always, we don't want the user to - * think that the feature is available when it may not be. - * So hide the description. - * - * .desc = "Hardware pagetable Dirty Bit Management", - * - */ + .desc = "Hardware dirty bit management", .type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE, .capability = ARM64_HW_DBM, .matches = has_hw_dbm, .cpu_enable = cpu_enable_hw_dbm, + .cpus = &dbm_cpus, ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, HAFDBS, DBM) }, #endif @@ -2641,7 +2657,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SME, .matches = has_cpuid_feature, - .cpu_enable = sme_kernel_enable, + .cpu_enable = cpu_enable_sme, ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, IMP) }, /* FA64 should be sorted after the base SME capability */ @@ -2650,7 +2666,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SME_FA64, .matches = has_cpuid_feature, - .cpu_enable = fa64_kernel_enable, + .cpu_enable = cpu_enable_fa64, ARM64_CPUID_FIELDS(ID_AA64SMFR0_EL1, FA64, IMP) }, { @@ -2658,7 +2674,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .type = ARM64_CPUCAP_SYSTEM_FEATURE, .capability = ARM64_SME2, .matches = has_cpuid_feature, - .cpu_enable = sme2_kernel_enable, + .cpu_enable = cpu_enable_sme2, ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, SME2) }, #endif /* CONFIG_ARM64_SME */ @@ -2787,6 +2803,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(ID_AA64ISAR0_EL1, SHA2, SHA512, CAP_HWCAP, KERNEL_HWCAP_SHA512), HWCAP_CAP(ID_AA64ISAR0_EL1, CRC32, IMP, CAP_HWCAP, KERNEL_HWCAP_CRC32), HWCAP_CAP(ID_AA64ISAR0_EL1, ATOMIC, IMP, CAP_HWCAP, KERNEL_HWCAP_ATOMICS), + HWCAP_CAP(ID_AA64ISAR0_EL1, ATOMIC, FEAT_LSE128, CAP_HWCAP, KERNEL_HWCAP_LSE128), HWCAP_CAP(ID_AA64ISAR0_EL1, RDM, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM), HWCAP_CAP(ID_AA64ISAR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SHA3), HWCAP_CAP(ID_AA64ISAR0_EL1, SM3, IMP, CAP_HWCAP, KERNEL_HWCAP_SM3), @@ -2807,6 +2824,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(ID_AA64ISAR1_EL1, FCMA, IMP, CAP_HWCAP, KERNEL_HWCAP_FCMA), HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, IMP, CAP_HWCAP, KERNEL_HWCAP_LRCPC), HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, LRCPC2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC), + HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, LRCPC3, CAP_HWCAP, KERNEL_HWCAP_LRCPC3), HWCAP_CAP(ID_AA64ISAR1_EL1, FRINTTS, IMP, CAP_HWCAP, KERNEL_HWCAP_FRINT), HWCAP_CAP(ID_AA64ISAR1_EL1, SB, IMP, CAP_HWCAP, KERNEL_HWCAP_SB), HWCAP_CAP(ID_AA64ISAR1_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_BF16), @@ -2821,6 +2839,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES), HWCAP_CAP(ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL), HWCAP_CAP(ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM), + HWCAP_CAP(ID_AA64ZFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_B16B16), HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16), HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16), HWCAP_CAP(ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3), @@ -2981,7 +3000,7 @@ static void update_cpu_capabilities(u16 scope_mask) !caps->matches(caps, cpucap_default_scope(caps))) continue; - if (caps->desc) + if (caps->desc && !caps->cpus) pr_info("detected: %s\n", caps->desc); __set_bit(caps->capability, system_cpucaps); @@ -3153,36 +3172,28 @@ static void verify_local_elf_hwcaps(void) static void verify_sve_features(void) { - u64 safe_zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1); - u64 zcr = read_zcr_features(); + unsigned long cpacr = cpacr_save_enable_kernel_sve(); - unsigned int safe_len = safe_zcr & ZCR_ELx_LEN_MASK; - unsigned int len = zcr & ZCR_ELx_LEN_MASK; - - if (len < safe_len || vec_verify_vq_map(ARM64_VEC_SVE)) { + if (vec_verify_vq_map(ARM64_VEC_SVE)) { pr_crit("CPU%d: SVE: vector length support mismatch\n", smp_processor_id()); cpu_die_early(); } - /* Add checks on other ZCR bits here if necessary */ + cpacr_restore(cpacr); } static void verify_sme_features(void) { - u64 safe_smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1); - u64 smcr = read_smcr_features(); - - unsigned int safe_len = safe_smcr & SMCR_ELx_LEN_MASK; - unsigned int len = smcr & SMCR_ELx_LEN_MASK; + unsigned long cpacr = cpacr_save_enable_kernel_sme(); - if (len < safe_len || vec_verify_vq_map(ARM64_VEC_SME)) { + if (vec_verify_vq_map(ARM64_VEC_SME)) { pr_crit("CPU%d: SME: vector length support mismatch\n", smp_processor_id()); cpu_die_early(); } - /* Add checks on other SMCR bits here if necessary */ + cpacr_restore(cpacr); } static void verify_hyp_capabilities(void) @@ -3289,7 +3300,6 @@ EXPORT_SYMBOL_GPL(this_cpu_has_cap); * This helper function is used in a narrow window when, * - The system wide safe registers are set with all the SMP CPUs and, * - The SYSTEM_FEATURE system_cpucaps may not have been set. - * In all other cases cpus_have_{const_}cap() should be used. */ static bool __maybe_unused __system_matches_cap(unsigned int n) { @@ -3328,23 +3338,50 @@ unsigned long cpu_get_elf_hwcap2(void) return elf_hwcap[1]; } -static void __init setup_system_capabilities(void) +void __init setup_system_features(void) { + int i; /* - * We have finalised the system-wide safe feature - * registers, finalise the capabilities that depend - * on it. Also enable all the available capabilities, - * that are not enabled already. + * The system-wide safe feature feature register values have been + * finalized. Finalize and log the available system capabilities. */ update_cpu_capabilities(SCOPE_SYSTEM); + if (IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN) && + !cpus_have_cap(ARM64_HAS_PAN)) + pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n"); + + /* + * Enable all the available capabilities which have not been enabled + * already. + */ enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU); + + kpti_install_ng_mappings(); + + sve_setup(); + sme_setup(); + + /* + * Check for sane CTR_EL0.CWG value. + */ + if (!cache_type_cwg()) + pr_warn("No Cache Writeback Granule information, assuming %d\n", + ARCH_DMA_MINALIGN); + + for (i = 0; i < ARM64_NCAPS; i++) { + const struct arm64_cpu_capabilities *caps = cpucap_ptrs[i]; + + if (caps && caps->cpus && caps->desc && + cpumask_any(caps->cpus) < nr_cpu_ids) + pr_info("detected: %s on CPU%*pbl\n", + caps->desc, cpumask_pr_args(caps->cpus)); + } } -void __init setup_cpu_features(void) +void __init setup_user_features(void) { - u32 cwg; + user_feature_fixup(); - setup_system_capabilities(); setup_elf_hwcaps(arm64_elf_hwcaps); if (system_supports_32bit_el0()) { @@ -3352,20 +3389,7 @@ void __init setup_cpu_features(void) elf_hwcap_fixup(); } - if (system_uses_ttbr0_pan()) - pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n"); - - sve_setup(); - sme_setup(); minsigstksz_setup(); - - /* - * Check for sane CTR_EL0.CWG value. - */ - cwg = cache_type_cwg(); - if (!cwg) - pr_warn("No Cache Writeback Granule information, assuming %d\n", - ARCH_DMA_MINALIGN); } static int enable_mismatched_32bit_el0(unsigned int cpu) @@ -3422,7 +3446,7 @@ subsys_initcall_sync(init_32bit_el0_mask); static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *cap) { - cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir); + cpu_enable_swapper_cnp(); } /* diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 98fda85005..a257da7b56 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -127,6 +127,9 @@ static const char *const hwcap_str[] = { [KERNEL_HWCAP_SME_F16F16] = "smef16f16", [KERNEL_HWCAP_MOPS] = "mops", [KERNEL_HWCAP_HBC] = "hbc", + [KERNEL_HWCAP_SVE_B16B16] = "sveb16b16", + [KERNEL_HWCAP_LRCPC3] = "lrcpc3", + [KERNEL_HWCAP_LSE128] = "lse128", }; #ifdef CONFIG_COMPAT diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index 2b478ca356..0228001347 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -71,10 +71,6 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md) return pgprot_val(PAGE_KERNEL_EXEC); } -/* we will fill this structure from the stub, so don't put it in .bss */ -struct screen_info screen_info __section(".data"); -EXPORT_SYMBOL(screen_info); - int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md) { pteval_t prot_val = create_mapping_protection(md); @@ -113,8 +109,7 @@ static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data) pte = set_pte_bit(pte, __pgprot(PTE_RDONLY)); if (md->attribute & EFI_MEMORY_XP) pte = set_pte_bit(pte, __pgprot(PTE_PXN)); - else if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && - system_supports_bti() && spd->has_bti) + else if (system_supports_bti_kernel() && spd->has_bti) pte = set_pte_bit(pte, __pgprot(PTE_GP)); set_pte(ptep, pte); return 0; diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index f9b3adebcb..0898ac9979 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -589,7 +589,6 @@ static struct ctl_table sve_default_vl_table[] = { .proc_handler = vec_proc_do_default_vl, .extra1 = &vl_info[ARM64_VEC_SVE], }, - { } }; static int __init sve_sysctl_init(void) @@ -613,7 +612,6 @@ static struct ctl_table sme_default_vl_table[] = { .proc_handler = vec_proc_do_default_vl, .extra1 = &vl_info[ARM64_VEC_SME], }, - { } }; static int __init sme_sysctl_init(void) @@ -1160,44 +1158,20 @@ fail: panic("Cannot allocate percpu memory for EFI SVE save/restore"); } -/* - * Enable SVE for EL1. - * Intended for use by the cpufeatures code during CPU boot. - */ -void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +void cpu_enable_sve(const struct arm64_cpu_capabilities *__always_unused p) { write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1); isb(); } -/* - * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE - * vector length. - * - * Use only if SVE is present. - * This function clobbers the SVE vector length. - */ -u64 read_zcr_features(void) -{ - /* - * Set the maximum possible VL, and write zeroes to all other - * bits to see if they stick. - */ - sve_kernel_enable(NULL); - write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1); - - /* Return LEN value that would be written to get the maximum VL */ - return sve_vq_from_vl(sve_get_vl()) - 1; -} - void __init sve_setup(void) { struct vl_info *info = &vl_info[ARM64_VEC_SVE]; - u64 zcr; DECLARE_BITMAP(tmp_map, SVE_VQ_MAX); unsigned long b; + int max_bit; - if (!system_supports_sve()) + if (!cpus_have_cap(ARM64_SVE)) return; /* @@ -1208,17 +1182,8 @@ void __init sve_setup(void) if (WARN_ON(!test_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map))) set_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map); - zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1); - info->max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1); - - /* - * Sanity-check that the max VL we determined through CPU features - * corresponds properly to sve_vq_map. If not, do our best: - */ - if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SVE, - info->max_vl))) - info->max_vl = find_supported_vector_length(ARM64_VEC_SVE, - info->max_vl); + max_bit = find_first_bit(info->vq_map, SVE_VQ_MAX); + info->max_vl = sve_vl_from_vq(__bit_to_vq(max_bit)); /* * For the default VL, pick the maximum supported value <= 64. @@ -1298,7 +1263,7 @@ static void sme_free(struct task_struct *task) task->thread.sme_state = NULL; } -void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +void cpu_enable_sme(const struct arm64_cpu_capabilities *__always_unused p) { /* Set priority for all PEs to architecturally defined minimum */ write_sysreg_s(read_sysreg_s(SYS_SMPRI_EL1) & ~SMPRI_EL1_PRIORITY_MASK, @@ -1313,80 +1278,48 @@ void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) isb(); } -/* - * This must be called after sme_kernel_enable(), we rely on the - * feature table being sorted to ensure this. - */ -void sme2_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +void cpu_enable_sme2(const struct arm64_cpu_capabilities *__always_unused p) { + /* This must be enabled after SME */ + BUILD_BUG_ON(ARM64_SME2 <= ARM64_SME); + /* Allow use of ZT0 */ write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_EZT0_MASK, SYS_SMCR_EL1); } -/* - * This must be called after sme_kernel_enable(), we rely on the - * feature table being sorted to ensure this. - */ -void fa64_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p) +void cpu_enable_fa64(const struct arm64_cpu_capabilities *__always_unused p) { + /* This must be enabled after SME */ + BUILD_BUG_ON(ARM64_SME_FA64 <= ARM64_SME); + /* Allow use of FA64 */ write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_FA64_MASK, SYS_SMCR_EL1); } -/* - * Read the pseudo-SMCR used by cpufeatures to identify the supported - * vector length. - * - * Use only if SME is present. - * This function clobbers the SME vector length. - */ -u64 read_smcr_features(void) -{ - sme_kernel_enable(NULL); - - /* - * Set the maximum possible VL. - */ - write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_LEN_MASK, - SYS_SMCR_EL1); - - /* Return LEN value that would be written to get the maximum VL */ - return sve_vq_from_vl(sme_get_vl()) - 1; -} - void __init sme_setup(void) { struct vl_info *info = &vl_info[ARM64_VEC_SME]; - u64 smcr; - int min_bit; + int min_bit, max_bit; - if (!system_supports_sme()) + if (!cpus_have_cap(ARM64_SME)) return; /* * SME doesn't require any particular vector length be * supported but it does require at least one. We should have * disabled the feature entirely while bringing up CPUs but - * let's double check here. + * let's double check here. The bitmap is SVE_VQ_MAP sized for + * sharing with SVE. */ WARN_ON(bitmap_empty(info->vq_map, SVE_VQ_MAX)); min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX); info->min_vl = sve_vl_from_vq(__bit_to_vq(min_bit)); - smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1); - info->max_vl = sve_vl_from_vq((smcr & SMCR_ELx_LEN_MASK) + 1); - - /* - * Sanity-check that the max VL we determined through CPU features - * corresponds properly to sme_vq_map. If not, do our best: - */ - if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SME, - info->max_vl))) - info->max_vl = find_supported_vector_length(ARM64_VEC_SME, - info->max_vl); + max_bit = find_first_bit(info->vq_map, SVE_VQ_MAX); + info->max_vl = sve_vl_from_vq(__bit_to_vq(max_bit)); WARN_ON(info->min_vl > info->max_vl); @@ -1406,6 +1339,22 @@ void __init sme_setup(void) get_sme_default_vl()); } +void sme_suspend_exit(void) +{ + u64 smcr = 0; + + if (!system_supports_sme()) + return; + + if (system_supports_fa64()) + smcr |= SMCR_ELx_FA64; + if (system_supports_sme2()) + smcr |= SMCR_ELx_EZT0; + + write_sysreg_s(smcr, SYS_SMCR_EL1); + write_sysreg_s(0, SYS_SMPRI_EL1); +} + #endif /* CONFIG_ARM64_SME */ static void sve_init_regs(void) @@ -1531,8 +1480,17 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs) */ void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs) { - /* TODO: implement lazy context saving/restoring */ - WARN_ON(1); + /* Even if we chose not to use FPSIMD, the hardware could still trap: */ + if (!system_supports_fpsimd()) { + force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0); + return; + } + + /* + * When FPSIMD is enabled, we should never take a trap unless something + * has gone very wrong. + */ + BUG(); } /* @@ -1686,7 +1644,7 @@ void fpsimd_preserve_current_state(void) void fpsimd_signal_preserve_current_state(void) { fpsimd_preserve_current_state(); - if (test_thread_flag(TIF_SVE)) + if (current->thread.fp_type == FP_STATE_SVE) sve_to_fpsimd(current); } @@ -1773,13 +1731,23 @@ void fpsimd_bind_state_to_cpu(struct cpu_fp_state *state) void fpsimd_restore_current_state(void) { /* - * For the tasks that were created before we detected the absence of - * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(), - * e.g, init. This could be then inherited by the children processes. - * If we later detect that the system doesn't support FP/SIMD, - * we must clear the flag for all the tasks to indicate that the - * FPSTATE is clean (as we can't have one) to avoid looping for ever in - * do_notify_resume(). + * TIF_FOREIGN_FPSTATE is set on the init task and copied by + * arch_dup_task_struct() regardless of whether FP/SIMD is detected. + * Thus user threads can have this set even when FP/SIMD hasn't been + * detected. + * + * When FP/SIMD is detected, begin_new_exec() will set + * TIF_FOREIGN_FPSTATE via flush_thread() -> fpsimd_flush_thread(), + * and fpsimd_thread_switch() will set TIF_FOREIGN_FPSTATE when + * switching tasks. We detect FP/SIMD before we exec the first user + * process, ensuring this has TIF_FOREIGN_FPSTATE set and + * do_notify_resume() will call fpsimd_restore_current_state() to + * install the user FP/SIMD context. + * + * When FP/SIMD is not detected, nothing else will clear or set + * TIF_FOREIGN_FPSTATE prior to the first return to userspace, and + * we must clear TIF_FOREIGN_FPSTATE to avoid do_notify_resume() + * looping forever calling fpsimd_restore_current_state(). */ if (!system_supports_fpsimd()) { clear_thread_flag(TIF_FOREIGN_FPSTATE); @@ -2112,6 +2080,13 @@ static inline void fpsimd_hotplug_init(void) static inline void fpsimd_hotplug_init(void) { } #endif +void cpu_enable_fpsimd(const struct arm64_cpu_capabilities *__always_unused p) +{ + unsigned long enable = CPACR_EL1_FPEN_EL1EN | CPACR_EL1_FPEN_EL0EN; + write_sysreg(read_sysreg(CPACR_EL1) | enable, CPACR_EL1); + isb(); +} + /* * FP/SIMD support code initialisation. */ diff --git a/arch/arm64/kernel/idle.c b/arch/arm64/kernel/idle.c index c1125753fe..05cfb347ec 100644 --- a/arch/arm64/kernel/idle.c +++ b/arch/arm64/kernel/idle.c @@ -20,7 +20,7 @@ * ensure that interrupts are not masked at the PMR (because the core will * not wake up if we block the wake up signal in the interrupt controller). */ -void noinstr cpu_do_idle(void) +void __cpuidle cpu_do_idle(void) { struct arm_cpuidle_irq_context context; @@ -35,7 +35,7 @@ void noinstr cpu_do_idle(void) /* * This is our default idle handler. */ -void noinstr arch_cpu_idle(void) +void __cpuidle arch_cpu_idle(void) { /* * This should do all the clock switching and wait for interrupt diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h index 35f3c79595..5e4dc72ab1 100644 --- a/arch/arm64/kernel/image-vars.h +++ b/arch/arm64/kernel/image-vars.h @@ -27,7 +27,9 @@ PROVIDE(__efistub__text = _text); PROVIDE(__efistub__end = _end); PROVIDE(__efistub___inittext_end = __inittext_end); PROVIDE(__efistub__edata = _edata); +#if defined(CONFIG_EFI_EARLYCON) || defined(CONFIG_SYSFB) PROVIDE(__efistub_screen_info = screen_info); +#endif PROVIDE(__efistub__ctype = _ctype); PROVIDE(__pi___memcpy = __pi_memcpy); diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index 6ad5c6ef53..85087e2df5 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c @@ -22,6 +22,7 @@ #include <linux/vmalloc.h> #include <asm/daifflags.h> #include <asm/exception.h> +#include <asm/numa.h> #include <asm/softirq_stack.h> #include <asm/stacktrace.h> #include <asm/vmap_stack.h> @@ -47,17 +48,17 @@ static void init_irq_scs(void) for_each_possible_cpu(cpu) per_cpu(irq_shadow_call_stack_ptr, cpu) = - scs_alloc(cpu_to_node(cpu)); + scs_alloc(early_cpu_to_node(cpu)); } #ifdef CONFIG_VMAP_STACK -static void init_irq_stacks(void) +static void __init init_irq_stacks(void) { int cpu; unsigned long *p; for_each_possible_cpu(cpu) { - p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu)); + p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, early_cpu_to_node(cpu)); per_cpu(irq_stack_ptr, cpu) = p; } } diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c index 79200f21e1..bde32979c0 100644 --- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -200,8 +200,7 @@ static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num, break; case R_AARCH64_ADR_PREL_PG_HI21_NC: case R_AARCH64_ADR_PREL_PG_HI21: - if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) || - !cpus_have_const_cap(ARM64_WORKAROUND_843419)) + if (!cpus_have_final_cap(ARM64_WORKAROUND_843419)) break; /* @@ -236,13 +235,13 @@ static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num, } } - if (IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) && - cpus_have_const_cap(ARM64_WORKAROUND_843419)) + if (cpus_have_final_cap(ARM64_WORKAROUND_843419)) { /* * Add some slack so we can skip PLT slots that may trigger * the erratum due to the placement of the ADRP instruction. */ ret += DIV_ROUND_UP(ret, (SZ_4K / sizeof(struct plt_entry))); + } return ret; } diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index 4edecaac8f..a41ef3213e 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -35,10 +35,10 @@ DEFINE_STATIC_KEY_FALSE(mte_async_or_asymm_mode); EXPORT_SYMBOL_GPL(mte_async_or_asymm_mode); #endif -void mte_sync_tags(pte_t pte) +void mte_sync_tags(pte_t pte, unsigned int nr_pages) { struct page *page = pte_page(pte); - long i, nr_pages = compound_nr(page); + unsigned int i; /* if PG_mte_tagged is set, tags have already been initialised */ for (i = 0; i < nr_pages; i++, page++) { @@ -411,8 +411,8 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr, struct page *page = get_user_page_vma_remote(mm, addr, gup_flags, &vma); - if (IS_ERR_OR_NULL(page)) { - err = page == NULL ? -EIO : PTR_ERR(page); + if (IS_ERR(page)) { + err = PTR_ERR(page); break; } diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 0fcc4eb1a7..7387b68c74 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -454,7 +454,7 @@ static void ssbs_thread_switch(struct task_struct *next) * If all CPUs implement the SSBS extension, then we just need to * context-switch the PSTATE field. */ - if (cpus_have_const_cap(ARM64_SSBS)) + if (alternative_has_cap_unlikely(ARM64_SSBS)) return; spectre_v4_enable_task_mitigation(next); @@ -724,7 +724,6 @@ static struct ctl_table tagged_addr_sysctl_table[] = { .extra1 = SYSCTL_ZERO, .extra2 = SYSCTL_ONE, }, - { } }; static int __init tagged_addr_init(void) diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index 05f40c4e18..6268a13a1d 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -972,7 +972,7 @@ static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot) * When KPTI is in use, the vectors are switched when exiting to * user-space. */ - if (arm64_kernel_unmapped_at_el0()) + if (cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0)) return; write_sysreg(v, vbar_el1); diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 0e8beb3349..425b1bc17a 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -242,7 +242,7 @@ static int preserve_sve_context(struct sve_context __user *ctx) vl = task_get_sme_vl(current); vq = sve_vq_from_vl(vl); flags |= SVE_SIG_FLAG_SM; - } else if (test_thread_flag(TIF_SVE)) { + } else if (current->thread.fp_type == FP_STATE_SVE) { vq = sve_vq_from_vl(vl); } @@ -878,7 +878,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user, if (system_supports_sve() || system_supports_sme()) { unsigned int vq = 0; - if (add_all || test_thread_flag(TIF_SVE) || + if (add_all || current->thread.fp_type == FP_STATE_SVE || thread_sm_enabled(¤t->thread)) { int vl = max(sve_max_vl(), sme_max_vl()); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 960b98b435..defbab84e9 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -32,7 +32,9 @@ #include <linux/irq_work.h> #include <linux/kernel_stat.h> #include <linux/kexec.h> +#include <linux/kgdb.h> #include <linux/kvm_host.h> +#include <linux/nmi.h> #include <asm/alternative.h> #include <asm/atomic.h> @@ -72,13 +74,19 @@ enum ipi_msg_type { IPI_CPU_CRASH_STOP, IPI_TIMER, IPI_IRQ_WORK, - IPI_WAKEUP, - NR_IPI + NR_IPI, + /* + * Any enum >= NR_IPI and < MAX_IPI is special and not tracable + * with trace_ipi_* + */ + IPI_CPU_BACKTRACE = NR_IPI, + IPI_KGDB_ROUNDUP, + MAX_IPI }; -static int ipi_irq_base __read_mostly; -static int nr_ipi __read_mostly = NR_IPI; -static struct irq_desc *ipi_desc[NR_IPI] __read_mostly; +static int ipi_irq_base __ro_after_init; +static int nr_ipi __ro_after_init = NR_IPI; +static struct irq_desc *ipi_desc[MAX_IPI] __ro_after_init; static void ipi_setup(int cpu); @@ -215,7 +223,7 @@ asmlinkage notrace void secondary_start_kernel(void) if (system_uses_irq_prio_masking()) init_gic_priority_masking(); - rcu_cpu_starting(cpu); + rcutree_report_cpu_starting(cpu); trace_hardirqs_off(); /* @@ -401,7 +409,7 @@ void __noreturn cpu_die_early(void) /* Mark this CPU absent */ set_cpu_present(cpu, 0); - rcu_report_dead(cpu); + rcutree_report_cpu_dead(); if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) { update_cpu_boot_status(CPU_KILL_ME); @@ -431,9 +439,10 @@ static void __init hyp_mode_check(void) void __init smp_cpus_done(unsigned int max_cpus) { pr_info("SMP: Total of %d processors activated.\n", num_online_cpus()); - setup_cpu_features(); + setup_system_features(); hyp_mode_check(); apply_alternatives_all(); + setup_user_features(); mark_linear_text_alias_ro(); } @@ -520,7 +529,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor) { u64 hwid = processor->arm_mpidr; - if (!(processor->flags & ACPI_MADT_ENABLED)) { + if (!acpi_gicc_is_usable(processor)) { pr_debug("skipping disabled CPU entry with 0x%llx MPIDR\n", hwid); return; } @@ -764,7 +773,6 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = { [IPI_CPU_CRASH_STOP] = "CPU stop (for crash dump) interrupts", [IPI_TIMER] = "Timer broadcast interrupts", [IPI_IRQ_WORK] = "IRQ work interrupts", - [IPI_WAKEUP] = "CPU wake-up interrupts", }; static void smp_cross_call(const struct cpumask *target, unsigned int ipinr); @@ -797,13 +805,6 @@ void arch_send_call_function_single_ipi(int cpu) smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC); } -#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL -void arch_send_wakeup_ipi_mask(const struct cpumask *mask) -{ - smp_cross_call(mask, IPI_WAKEUP); -} -#endif - #ifdef CONFIG_IRQ_WORK void arch_irq_work_raise(void) { @@ -854,6 +855,38 @@ static void __noreturn ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs #endif } +static void arm64_backtrace_ipi(cpumask_t *mask) +{ + __ipi_send_mask(ipi_desc[IPI_CPU_BACKTRACE], mask); +} + +void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu) +{ + /* + * NOTE: though nmi_trigger_cpumask_backtrace() has "nmi_" in the name, + * nothing about it truly needs to be implemented using an NMI, it's + * just that it's _allowed_ to work with NMIs. If ipi_should_be_nmi() + * returned false our backtrace attempt will just use a regular IPI. + */ + nmi_trigger_cpumask_backtrace(mask, exclude_cpu, arm64_backtrace_ipi); +} + +#ifdef CONFIG_KGDB +void kgdb_roundup_cpus(void) +{ + int this_cpu = raw_smp_processor_id(); + int cpu; + + for_each_online_cpu(cpu) { + /* No need to roundup ourselves */ + if (cpu == this_cpu) + continue; + + __ipi_send_single(ipi_desc[IPI_KGDB_ROUNDUP], cpu); + } +} +#endif + /* * Main handler for inter-processor interrupts */ @@ -897,13 +930,17 @@ static void do_handle_IPI(int ipinr) break; #endif -#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL - case IPI_WAKEUP: - WARN_ONCE(!acpi_parking_protocol_valid(cpu), - "CPU%u: Wake-up IPI outside the ACPI parking protocol\n", - cpu); + case IPI_CPU_BACKTRACE: + /* + * NOTE: in some cases this _won't_ be NMI context. See the + * comment in arch_trigger_cpumask_backtrace(). + */ + nmi_cpu_backtrace(get_irq_regs()); + break; + + case IPI_KGDB_ROUNDUP: + kgdb_nmicallback(cpu, get_irq_regs()); break; -#endif default: pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr); @@ -926,6 +963,22 @@ static void smp_cross_call(const struct cpumask *target, unsigned int ipinr) __ipi_send_mask(ipi_desc[ipinr], target); } +static bool ipi_should_be_nmi(enum ipi_msg_type ipi) +{ + if (!system_uses_irq_prio_masking()) + return false; + + switch (ipi) { + case IPI_CPU_STOP: + case IPI_CPU_CRASH_STOP: + case IPI_CPU_BACKTRACE: + case IPI_KGDB_ROUNDUP: + return true; + default: + return false; + } +} + static void ipi_setup(int cpu) { int i; @@ -933,8 +986,14 @@ static void ipi_setup(int cpu) if (WARN_ON_ONCE(!ipi_irq_base)) return; - for (i = 0; i < nr_ipi; i++) - enable_percpu_irq(ipi_irq_base + i, 0); + for (i = 0; i < nr_ipi; i++) { + if (ipi_should_be_nmi(i)) { + prepare_percpu_nmi(ipi_irq_base + i); + enable_percpu_nmi(ipi_irq_base + i, 0); + } else { + enable_percpu_irq(ipi_irq_base + i, 0); + } + } } #ifdef CONFIG_HOTPLUG_CPU @@ -945,8 +1004,14 @@ static void ipi_teardown(int cpu) if (WARN_ON_ONCE(!ipi_irq_base)) return; - for (i = 0; i < nr_ipi; i++) - disable_percpu_irq(ipi_irq_base + i); + for (i = 0; i < nr_ipi; i++) { + if (ipi_should_be_nmi(i)) { + disable_percpu_nmi(ipi_irq_base + i); + teardown_percpu_nmi(ipi_irq_base + i); + } else { + disable_percpu_irq(ipi_irq_base + i); + } + } } #endif @@ -954,15 +1019,23 @@ void __init set_smp_ipi_range(int ipi_base, int n) { int i; - WARN_ON(n < NR_IPI); - nr_ipi = min(n, NR_IPI); + WARN_ON(n < MAX_IPI); + nr_ipi = min(n, MAX_IPI); for (i = 0; i < nr_ipi; i++) { int err; - err = request_percpu_irq(ipi_base + i, ipi_handler, - "IPI", &cpu_number); - WARN_ON(err); + if (ipi_should_be_nmi(i)) { + err = request_percpu_nmi(ipi_base + i, ipi_handler, + "IPI", &cpu_number); + WARN(err, "Could not request IPI %d as NMI, err=%d\n", + i, err); + } else { + err = request_percpu_irq(ipi_base + i, ipi_handler, + "IPI", &cpu_number); + WARN(err, "Could not request IPI %d as IRQ, err=%d\n", + i, err); + } ipi_desc[i] = irq_to_desc(ipi_base + i); irq_set_status_flags(ipi_base + i, IRQ_HIDDEN); @@ -979,6 +1052,17 @@ void arch_smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } +#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL +void arch_send_wakeup_ipi(unsigned int cpu) +{ + /* + * We use a scheduler IPI to wake the CPU as this avoids the need for a + * dedicated IPI and we can safely handle spurious scheduler IPIs. + */ + smp_send_reschedule(cpu); +} +#endif + #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST void tick_broadcast(const struct cpumask *mask) { diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 0fbdf5fe64..eaaff94329 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -12,6 +12,7 @@ #include <asm/daifflags.h> #include <asm/debug-monitors.h> #include <asm/exec.h> +#include <asm/fpsimd.h> #include <asm/mte.h> #include <asm/memory.h> #include <asm/mmu_context.h> @@ -55,13 +56,13 @@ void notrace __cpu_suspend_exit(void) /* Restore CnP bit in TTBR1_EL1 */ if (system_supports_cnp()) - cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir); + cpu_enable_swapper_cnp(); /* * PSTATE was not saved over suspend/resume, re-enable any detected * features that might not have been set correctly. */ - if (cpus_have_const_cap(ARM64_HAS_DIT)) + if (alternative_has_cap_unlikely(ARM64_HAS_DIT)) set_pstate_dit(1); __uaccess_enable_hw_pan(); @@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void) */ spectre_v4_enable_mitigation(NULL); + sme_suspend_exit(); + /* Restore additional feature-specific configuration */ ptrauth_suspend_exit(); } @@ -98,6 +101,15 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) struct sleep_stack_data state; struct arm_cpuidle_irq_context context; + /* + * Some portions of CPU state (e.g. PSTATE.{PAN,DIT}) are initialized + * before alternatives are patched, but are only restored by + * __cpu_suspend_exit() after alternatives are patched. To avoid + * accidentally losing these bits we must not attempt to suspend until + * after alternatives have been patched. + */ + WARN_ON(!system_capabilities_finalized()); + /* Report any MTE async fault before going to suspend */ mte_suspend_enter(); diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c index df14336c3a..4a609e9b65 100644 --- a/arch/arm64/kernel/sys_compat.c +++ b/arch/arm64/kernel/sys_compat.c @@ -31,7 +31,7 @@ __do_compat_cache_op(unsigned long start, unsigned long end) if (fatal_signal_pending(current)) return 0; - if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) { + if (cpus_have_final_cap(ARM64_WORKAROUND_1542419)) { /* * The workaround requires an inner-shareable tlbi. * We pick the reserved-ASID to minimise the impact. diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 8b70759cdb..215e6d7f2d 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -516,53 +516,7 @@ void do_el1_fpac(struct pt_regs *regs, unsigned long esr) void do_el0_mops(struct pt_regs *regs, unsigned long esr) { - bool wrong_option = esr & ESR_ELx_MOPS_ISS_WRONG_OPTION; - bool option_a = esr & ESR_ELx_MOPS_ISS_OPTION_A; - int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr); - int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr); - int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr); - unsigned long dst, src, size; - - dst = pt_regs_read_reg(regs, dstreg); - src = pt_regs_read_reg(regs, srcreg); - size = pt_regs_read_reg(regs, sizereg); - - /* - * Put the registers back in the original format suitable for a - * prologue instruction, using the generic return routine from the - * Arm ARM (DDI 0487I.a) rules CNTMJ and MWFQH. - */ - if (esr & ESR_ELx_MOPS_ISS_MEM_INST) { - /* SET* instruction */ - if (option_a ^ wrong_option) { - /* Format is from Option A; forward set */ - pt_regs_write_reg(regs, dstreg, dst + size); - pt_regs_write_reg(regs, sizereg, -size); - } - } else { - /* CPY* instruction */ - if (!(option_a ^ wrong_option)) { - /* Format is from Option B */ - if (regs->pstate & PSR_N_BIT) { - /* Backward copy */ - pt_regs_write_reg(regs, dstreg, dst - size); - pt_regs_write_reg(regs, srcreg, src - size); - } - } else { - /* Format is from Option A */ - if (size & BIT(63)) { - /* Forward copy */ - pt_regs_write_reg(regs, dstreg, dst + size); - pt_regs_write_reg(regs, srcreg, src + size); - pt_regs_write_reg(regs, sizereg, -size); - } - } - } - - if (esr & ESR_ELx_MOPS_ISS_FROM_EPILOGUE) - regs->pc -= 8; - else - regs->pc -= 4; + arm64_mops_reset_regs(®s->user_regs, esr); /* * If single stepping then finish the step before executing the @@ -631,7 +585,7 @@ static void ctr_read_handler(unsigned long esr, struct pt_regs *regs) int rt = ESR_ELx_SYS64_ISS_RT(esr); unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0); - if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) { + if (cpus_have_final_cap(ARM64_WORKAROUND_1542419)) { /* Hide DIC so that we can trap the unnecessary maintenance...*/ val &= ~BIT(CTR_EL0_DIC_SHIFT); diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index d9e1355730..5562daf38a 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -212,7 +212,7 @@ static int __setup_additional_pages(enum vdso_abi abi, if (IS_ERR(ret)) goto up_fail; - if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti()) + if (system_supports_bti_kernel()) gp_flags = VM_ARM64_BTI; vdso_base += VVAR_NR_PAGES * PAGE_SIZE; diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index fe7a53c678..8818287f10 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -78,13 +78,3 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE # Actual build commands quiet_cmd_vdsold_and_vdso_check = LD $@ cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) - -# Install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@ - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso.so diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 2f73e5bca2..1f911a76c5 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -172,13 +172,3 @@ gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ # The AArch64 nm should be able to read an AArch32 binary cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ - -# Install commands for the unstripped file -quiet_cmd_vdso_install = INSTALL32 $@ - cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so - -vdso.so: $(obj)/vdso.so.dbg - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: vdso.so diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c index a1e24228aa..13ba691b84 100644 --- a/arch/arm64/kvm/arch_timer.c +++ b/arch/arm64/kvm/arch_timer.c @@ -453,7 +453,7 @@ static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level, timer_ctx->irq.level); if (!userspace_irqchip(vcpu->kvm)) { - ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id, + ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu, timer_irq(timer_ctx), timer_ctx->irq.level, timer_ctx); @@ -936,7 +936,7 @@ void kvm_timer_sync_user(struct kvm_vcpu *vcpu) unmask_vtimer_irq_user(vcpu); } -int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu) +void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu) { struct arch_timer_cpu *timer = vcpu_timer(vcpu); struct timer_map map; @@ -980,8 +980,6 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu) soft_timer_cancel(&map.emul_vtimer->hrtimer); if (map.emul_ptimer) soft_timer_cancel(&map.emul_ptimer->hrtimer); - - return 0; } static void timer_context_init(struct kvm_vcpu *vcpu, int timerid) diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 685cc43614..4796104c44 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -205,6 +205,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) if (is_protected_kvm_enabled()) pkvm_destroy_hyp_vm(kvm); + kfree(kvm->arch.mpidr_data); kvm_destroy_vcpus(kvm); kvm_unshare_hyp(kvm, kvm + 1); @@ -284,7 +285,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) r = kvm_arm_pvtime_supported(); break; case KVM_CAP_ARM_EL1_32BIT: - r = cpus_have_const_cap(ARM64_HAS_32BIT_EL1); + r = cpus_have_final_cap(ARM64_HAS_32BIT_EL1); break; case KVM_CAP_GUEST_DEBUG_HW_BPS: r = get_num_brps(); @@ -296,7 +297,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) r = kvm_arm_support_pmu_v3(); break; case KVM_CAP_ARM_INJECT_SERROR_ESR: - r = cpus_have_const_cap(ARM64_HAS_RAS_EXTN); + r = cpus_have_final_cap(ARM64_HAS_RAS_EXTN); break; case KVM_CAP_ARM_VM_IPA_SIZE: r = get_kvm_ipa_limit(); @@ -317,6 +318,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES: r = kvm_supported_block_sizes(); break; + case KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES: + r = BIT(0); + break; default: r = 0; } @@ -367,7 +371,6 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu) /* Force users to call KVM_ARM_VCPU_INIT */ vcpu_clear_flag(vcpu, VCPU_INITIALIZED); - bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES); vcpu->arch.mmu_page_cache.gfp_zero = __GFP_ZERO; @@ -438,9 +441,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) * We might get preempted before the vCPU actually runs, but * over-invalidation doesn't affect correctness. */ - if (*last_ran != vcpu->vcpu_id) { + if (*last_ran != vcpu->vcpu_idx) { kvm_call_hyp(__kvm_flush_cpu_context, mmu); - *last_ran = vcpu->vcpu_id; + *last_ran = vcpu->vcpu_idx; } vcpu->cpu = cpu; @@ -448,7 +451,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) kvm_vgic_load(vcpu); kvm_timer_vcpu_load(vcpu); if (has_vhe()) - kvm_vcpu_load_sysregs_vhe(vcpu); + kvm_vcpu_load_vhe(vcpu); kvm_arch_vcpu_load_fp(vcpu); kvm_vcpu_pmu_restore_guest(vcpu); if (kvm_arm_is_pvtime_enabled(&vcpu->arch)) @@ -472,7 +475,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) kvm_arch_vcpu_put_debug_state_flags(vcpu); kvm_arch_vcpu_put_fp(vcpu); if (has_vhe()) - kvm_vcpu_put_sysregs_vhe(vcpu); + kvm_vcpu_put_vhe(vcpu); kvm_timer_vcpu_put(vcpu); kvm_vgic_put(vcpu); kvm_vcpu_pmu_restore_host(vcpu); @@ -578,6 +581,57 @@ static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) return vcpu_get_flag(vcpu, VCPU_INITIALIZED); } +static void kvm_init_mpidr_data(struct kvm *kvm) +{ + struct kvm_mpidr_data *data = NULL; + unsigned long c, mask, nr_entries; + u64 aff_set = 0, aff_clr = ~0UL; + struct kvm_vcpu *vcpu; + + mutex_lock(&kvm->arch.config_lock); + + if (kvm->arch.mpidr_data || atomic_read(&kvm->online_vcpus) == 1) + goto out; + + kvm_for_each_vcpu(c, vcpu, kvm) { + u64 aff = kvm_vcpu_get_mpidr_aff(vcpu); + aff_set |= aff; + aff_clr &= aff; + } + + /* + * A significant bit can be either 0 or 1, and will only appear in + * aff_set. Use aff_clr to weed out the useless stuff. + */ + mask = aff_set ^ aff_clr; + nr_entries = BIT_ULL(hweight_long(mask)); + + /* + * Don't let userspace fool us. If we need more than a single page + * to describe the compressed MPIDR array, just fall back to the + * iterative method. Single vcpu VMs do not need this either. + */ + if (struct_size(data, cmpidr_to_idx, nr_entries) <= PAGE_SIZE) + data = kzalloc(struct_size(data, cmpidr_to_idx, nr_entries), + GFP_KERNEL_ACCOUNT); + + if (!data) + goto out; + + data->mpidr_mask = mask; + + kvm_for_each_vcpu(c, vcpu, kvm) { + u64 aff = kvm_vcpu_get_mpidr_aff(vcpu); + u16 index = kvm_mpidr_index(data, aff); + + data->cmpidr_to_idx[index] = c; + } + + kvm->arch.mpidr_data = data; +out: + mutex_unlock(&kvm->arch.config_lock); +} + /* * Handle both the initialisation that is being done when the vcpu is * run for the first time, as well as the updates that must be @@ -601,6 +655,8 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu) if (likely(vcpu_has_run_once(vcpu))) return 0; + kvm_init_mpidr_data(kvm); + kvm_arm_vcpu_init_debug(vcpu); if (likely(irqchip_in_kernel(kvm))) { @@ -801,8 +857,7 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu) } if (kvm_check_request(KVM_REQ_RELOAD_PMU, vcpu)) - kvm_pmu_handle_pmcr(vcpu, - __vcpu_sys_reg(vcpu, PMCR_EL0)); + kvm_vcpu_reload_pmu(vcpu); if (kvm_check_request(KVM_REQ_RESYNC_PMU_EL0, vcpu)) kvm_vcpu_pmu_restore_guest(vcpu); @@ -950,7 +1005,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) * making a thread's VMID inactive. So we need to call * kvm_arm_vmid_update() in non-premptible context. */ - kvm_arm_vmid_update(&vcpu->arch.hw_mmu->vmid); + if (kvm_arm_vmid_update(&vcpu->arch.hw_mmu->vmid) && + has_vhe()) + __load_stage2(vcpu->arch.hw_mmu, + vcpu->arch.hw_mmu->arch); kvm_pmu_flush_hwstate(vcpu); @@ -1134,27 +1192,23 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, bool line_status) { u32 irq = irq_level->irq; - unsigned int irq_type, vcpu_idx, irq_num; - int nrcpus = atomic_read(&kvm->online_vcpus); + unsigned int irq_type, vcpu_id, irq_num; struct kvm_vcpu *vcpu = NULL; bool level = irq_level->level; irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK; - vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK; - vcpu_idx += ((irq >> KVM_ARM_IRQ_VCPU2_SHIFT) & KVM_ARM_IRQ_VCPU2_MASK) * (KVM_ARM_IRQ_VCPU_MASK + 1); + vcpu_id = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK; + vcpu_id += ((irq >> KVM_ARM_IRQ_VCPU2_SHIFT) & KVM_ARM_IRQ_VCPU2_MASK) * (KVM_ARM_IRQ_VCPU_MASK + 1); irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK; - trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level); + trace_kvm_irq_line(irq_type, vcpu_id, irq_num, irq_level->level); switch (irq_type) { case KVM_ARM_IRQ_TYPE_CPU: if (irqchip_in_kernel(kvm)) return -ENXIO; - if (vcpu_idx >= nrcpus) - return -EINVAL; - - vcpu = kvm_get_vcpu(kvm, vcpu_idx); + vcpu = kvm_get_vcpu_by_id(kvm, vcpu_id); if (!vcpu) return -EINVAL; @@ -1166,17 +1220,14 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, if (!irqchip_in_kernel(kvm)) return -ENXIO; - if (vcpu_idx >= nrcpus) - return -EINVAL; - - vcpu = kvm_get_vcpu(kvm, vcpu_idx); + vcpu = kvm_get_vcpu_by_id(kvm, vcpu_id); if (!vcpu) return -EINVAL; if (irq_num < VGIC_NR_SGIS || irq_num >= VGIC_NR_PRIVATE_IRQS) return -EINVAL; - return kvm_vgic_inject_irq(kvm, vcpu->vcpu_id, irq_num, level, NULL); + return kvm_vgic_inject_irq(kvm, vcpu, irq_num, level, NULL); case KVM_ARM_IRQ_TYPE_SPI: if (!irqchip_in_kernel(kvm)) return -ENXIO; @@ -1184,12 +1235,36 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, if (irq_num < VGIC_NR_PRIVATE_IRQS) return -EINVAL; - return kvm_vgic_inject_irq(kvm, 0, irq_num, level, NULL); + return kvm_vgic_inject_irq(kvm, NULL, irq_num, level, NULL); } return -EINVAL; } +static unsigned long system_supported_vcpu_features(void) +{ + unsigned long features = KVM_VCPU_VALID_FEATURES; + + if (!cpus_have_final_cap(ARM64_HAS_32BIT_EL1)) + clear_bit(KVM_ARM_VCPU_EL1_32BIT, &features); + + if (!kvm_arm_support_pmu_v3()) + clear_bit(KVM_ARM_VCPU_PMU_V3, &features); + + if (!system_supports_sve()) + clear_bit(KVM_ARM_VCPU_SVE, &features); + + if (!system_has_full_ptr_auth()) { + clear_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, &features); + clear_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, &features); + } + + if (!cpus_have_final_cap(ARM64_HAS_NESTED_VIRT)) + clear_bit(KVM_ARM_VCPU_HAS_EL2, &features); + + return features; +} + static int kvm_vcpu_init_check_features(struct kvm_vcpu *vcpu, const struct kvm_vcpu_init *init) { @@ -1204,12 +1279,25 @@ static int kvm_vcpu_init_check_features(struct kvm_vcpu *vcpu, return -ENOENT; } - if (!test_bit(KVM_ARM_VCPU_EL1_32BIT, &features)) - return 0; + if (features & ~system_supported_vcpu_features()) + return -EINVAL; - if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1)) + /* + * For now make sure that both address/generic pointer authentication + * features are requested by the userspace together. + */ + if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, &features) != + test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, &features)) return -EINVAL; + /* Disallow NV+SVE for the time being */ + if (test_bit(KVM_ARM_VCPU_HAS_EL2, &features) && + test_bit(KVM_ARM_VCPU_SVE, &features)) + return -EINVAL; + + if (!test_bit(KVM_ARM_VCPU_EL1_32BIT, &features)) + return 0; + /* MTE is incompatible with AArch32 */ if (kvm_has_mte(vcpu->kvm)) return -EINVAL; @@ -1226,7 +1314,23 @@ static bool kvm_vcpu_init_changed(struct kvm_vcpu *vcpu, { unsigned long features = init->features[0]; - return !bitmap_equal(vcpu->arch.features, &features, KVM_VCPU_MAX_FEATURES); + return !bitmap_equal(vcpu->kvm->arch.vcpu_features, &features, + KVM_VCPU_MAX_FEATURES); +} + +static int kvm_setup_vcpu(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = vcpu->kvm; + int ret = 0; + + /* + * When the vCPU has a PMU, but no PMU is set for the guest + * yet, set the default one. + */ + if (kvm_vcpu_has_pmu(vcpu) && !kvm->arch.arm_pmu) + ret = kvm_arm_set_default_pmu(kvm); + + return ret; } static int __kvm_vcpu_set_target(struct kvm_vcpu *vcpu, @@ -1239,21 +1343,21 @@ static int __kvm_vcpu_set_target(struct kvm_vcpu *vcpu, mutex_lock(&kvm->arch.config_lock); if (test_bit(KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED, &kvm->arch.flags) && - !bitmap_equal(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES)) + kvm_vcpu_init_changed(vcpu, init)) goto out_unlock; - bitmap_copy(vcpu->arch.features, &features, KVM_VCPU_MAX_FEATURES); + bitmap_copy(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES); - /* Now we know what it is, we can reset it. */ - ret = kvm_reset_vcpu(vcpu); - if (ret) { - bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES); + ret = kvm_setup_vcpu(vcpu); + if (ret) goto out_unlock; - } - bitmap_copy(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES); + /* Now we know what it is, we can reset it. */ + kvm_reset_vcpu(vcpu); + set_bit(KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED, &kvm->arch.flags); vcpu_set_flag(vcpu, VCPU_INITIALIZED); + ret = 0; out_unlock: mutex_unlock(&kvm->arch.config_lock); return ret; @@ -1278,7 +1382,8 @@ static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, if (kvm_vcpu_init_changed(vcpu, init)) return -EINVAL; - return kvm_reset_vcpu(vcpu); + kvm_reset_vcpu(vcpu); + return 0; } static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu, @@ -1629,6 +1734,13 @@ int kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) return kvm_vm_set_attr(kvm, &attr); } + case KVM_ARM_GET_REG_WRITABLE_MASKS: { + struct reg_mask_range range; + + if (copy_from_user(&range, argp, sizeof(range))) + return -EFAULT; + return kvm_vm_ioctl_get_reg_writable_masks(kvm, &range); + } default: return -EINVAL; } @@ -1777,7 +1889,7 @@ static void hyp_install_host_vector(void) * Call initialization code, and switch to the full blown HYP code. * If the cpucaps haven't been finalized yet, something has gone very * wrong, and hyp will crash and burn when it uses any - * cpus_have_const_cap() wrapper. + * cpus_have_*_cap() wrapper. */ BUG_ON(!system_capabilities_finalized()); params = this_cpu_ptr_nvhe_sym(kvm_init_params); @@ -2310,7 +2422,7 @@ static int __init init_hyp_mode(void) if (is_protected_kvm_enabled()) { if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL) && - cpus_have_const_cap(ARM64_HAS_ADDRESS_AUTH)) + cpus_have_final_cap(ARM64_HAS_ADDRESS_AUTH)) pkvm_hyp_init_ptrauth(); init_cpu_logical_map(); @@ -2341,6 +2453,18 @@ struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr) unsigned long i; mpidr &= MPIDR_HWID_BITMASK; + + if (kvm->arch.mpidr_data) { + u16 idx = kvm_mpidr_index(kvm->arch.mpidr_data, mpidr); + + vcpu = kvm_get_vcpu(kvm, + kvm->arch.mpidr_data->cmpidr_to_idx[idx]); + if (mpidr != kvm_vcpu_get_mpidr_aff(vcpu)) + vcpu = NULL; + + return vcpu; + } + kvm_for_each_vcpu(i, vcpu, kvm) { if (mpidr == kvm_vcpu_get_mpidr_aff(vcpu)) return vcpu; diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c index ee902ff2a5..06185216a2 100644 --- a/arch/arm64/kvm/emulate-nested.c +++ b/arch/arm64/kvm/emulate-nested.c @@ -648,15 +648,80 @@ static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = { SR_TRAP(SYS_APGAKEYLO_EL1, CGT_HCR_APK), SR_TRAP(SYS_APGAKEYHI_EL1, CGT_HCR_APK), /* All _EL2 registers */ - SR_RANGE_TRAP(sys_reg(3, 4, 0, 0, 0), - sys_reg(3, 4, 3, 15, 7), CGT_HCR_NV), + SR_TRAP(SYS_BRBCR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VPIDR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VMPIDR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_SCTLR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_ACTLR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_SCTLR2_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_HCR_EL2, + SYS_HCRX_EL2, CGT_HCR_NV), + SR_TRAP(SYS_SMPRIMAP_EL2, CGT_HCR_NV), + SR_TRAP(SYS_SMCR_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_TTBR0_EL2, + SYS_TCR2_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VTTBR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VTCR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VNCR_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_HDFGRTR_EL2, + SYS_HAFGRTR_EL2, CGT_HCR_NV), /* Skip the SP_EL1 encoding... */ SR_TRAP(SYS_SPSR_EL2, CGT_HCR_NV), SR_TRAP(SYS_ELR_EL2, CGT_HCR_NV), - SR_RANGE_TRAP(sys_reg(3, 4, 4, 1, 1), - sys_reg(3, 4, 10, 15, 7), CGT_HCR_NV), - SR_RANGE_TRAP(sys_reg(3, 4, 12, 0, 0), - sys_reg(3, 4, 14, 15, 7), CGT_HCR_NV), + /* Skip SPSR_irq, SPSR_abt, SPSR_und, SPSR_fiq */ + SR_TRAP(SYS_AFSR0_EL2, CGT_HCR_NV), + SR_TRAP(SYS_AFSR1_EL2, CGT_HCR_NV), + SR_TRAP(SYS_ESR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VSESR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_TFSR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_FAR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_HPFAR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_PMSCR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_MAIR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_AMAIR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_MPAMHCR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_MPAMVPMV_EL2, CGT_HCR_NV), + SR_TRAP(SYS_MPAM2_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_MPAMVPM0_EL2, + SYS_MPAMVPM7_EL2, CGT_HCR_NV), + /* + * Note that the spec. describes a group of MEC registers + * whose access should not trap, therefore skip the following: + * MECID_A0_EL2, MECID_A1_EL2, MECID_P0_EL2, + * MECID_P1_EL2, MECIDR_EL2, VMECID_A_EL2, + * VMECID_P_EL2. + */ + SR_RANGE_TRAP(SYS_VBAR_EL2, + SYS_RMR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_VDISR_EL2, CGT_HCR_NV), + /* ICH_AP0R<m>_EL2 */ + SR_RANGE_TRAP(SYS_ICH_AP0R0_EL2, + SYS_ICH_AP0R3_EL2, CGT_HCR_NV), + /* ICH_AP1R<m>_EL2 */ + SR_RANGE_TRAP(SYS_ICH_AP1R0_EL2, + SYS_ICH_AP1R3_EL2, CGT_HCR_NV), + SR_TRAP(SYS_ICC_SRE_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_ICH_HCR_EL2, + SYS_ICH_EISR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_ICH_ELRSR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_ICH_VMCR_EL2, CGT_HCR_NV), + /* ICH_LR<m>_EL2 */ + SR_RANGE_TRAP(SYS_ICH_LR0_EL2, + SYS_ICH_LR15_EL2, CGT_HCR_NV), + SR_TRAP(SYS_CONTEXTIDR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_TPIDR_EL2, CGT_HCR_NV), + SR_TRAP(SYS_SCXTNUM_EL2, CGT_HCR_NV), + /* AMEVCNTVOFF0<n>_EL2, AMEVCNTVOFF1<n>_EL2 */ + SR_RANGE_TRAP(SYS_AMEVCNTVOFF0n_EL2(0), + SYS_AMEVCNTVOFF1n_EL2(15), CGT_HCR_NV), + /* CNT*_EL2 */ + SR_TRAP(SYS_CNTVOFF_EL2, CGT_HCR_NV), + SR_TRAP(SYS_CNTPOFF_EL2, CGT_HCR_NV), + SR_TRAP(SYS_CNTHCTL_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_CNTHP_TVAL_EL2, + SYS_CNTHP_CVAL_EL2, CGT_HCR_NV), + SR_RANGE_TRAP(SYS_CNTHV_TVAL_EL2, + SYS_CNTHV_CVAL_EL2, CGT_HCR_NV), /* All _EL02, _EL12 registers */ SR_RANGE_TRAP(sys_reg(3, 5, 0, 0, 0), sys_reg(3, 5, 10, 15, 7), CGT_HCR_NV), diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index a1710e5fa7..aaf1d49397 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -815,7 +815,7 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events) { events->exception.serror_pending = !!(vcpu->arch.hcr_el2 & HCR_VSE); - events->exception.serror_has_esr = cpus_have_const_cap(ARM64_HAS_RAS_EXTN); + events->exception.serror_has_esr = cpus_have_final_cap(ARM64_HAS_RAS_EXTN); if (events->exception.serror_pending && events->exception.serror_has_esr) events->exception.serror_esr = vcpu_get_vsesr(vcpu); @@ -837,7 +837,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, bool ext_dabt_pending = events->exception.ext_dabt_pending; if (serror_pending && has_esr) { - if (!cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) + if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) return -EINVAL; if (!((events->exception.serror_esr) & ~ESR_ELx_ISS_MASK)) diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 9cfe6bd1db..f99d8af0b9 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -30,6 +30,7 @@ #include <asm/fpsimd.h> #include <asm/debug-monitors.h> #include <asm/processor.h> +#include <asm/traps.h> struct kvm_exception_table_entry { int insn, fixup; @@ -265,6 +266,22 @@ static inline bool __populate_fault_info(struct kvm_vcpu *vcpu) return __get_fault_info(vcpu->arch.fault.esr_el2, &vcpu->arch.fault); } +static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + *vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR); + arm64_mops_reset_regs(vcpu_gp_regs(vcpu), vcpu->arch.fault.esr_el2); + write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR); + + /* + * Finish potential single step before executing the prologue + * instruction. + */ + *vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS; + write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR); + + return true; +} + static inline void __hyp_sve_restore_guest(struct kvm_vcpu *vcpu) { sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1, SYS_ZCR_EL2); diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h index 37440e1dda..e91922daa8 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h +++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h @@ -197,7 +197,8 @@ #define PVM_ID_AA64ISAR2_ALLOW (\ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) \ + ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS) \ ) u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id); diff --git a/arch/arm64/kvm/hyp/nvhe/ffa.c b/arch/arm64/kvm/hyp/nvhe/ffa.c index 6e4dba9ead..320f2eaa14 100644 --- a/arch/arm64/kvm/hyp/nvhe/ffa.c +++ b/arch/arm64/kvm/hyp/nvhe/ffa.c @@ -423,6 +423,7 @@ static __always_inline void do_ffa_mem_xfer(const u64 func_id, DECLARE_REG(u32, fraglen, ctxt, 2); DECLARE_REG(u64, addr_mbz, ctxt, 3); DECLARE_REG(u32, npages_mbz, ctxt, 4); + struct ffa_mem_region_attributes *ep_mem_access; struct ffa_composite_mem_region *reg; struct ffa_mem_region *buf; u32 offset, nr_ranges; @@ -452,7 +453,9 @@ static __always_inline void do_ffa_mem_xfer(const u64 func_id, buf = hyp_buffers.tx; memcpy(buf, host_buffers.tx, fraglen); - offset = buf->ep_mem_access[0].composite_off; + ep_mem_access = (void *)buf + + ffa_mem_desc_offset(buf, 0, FFA_VERSION_1_0); + offset = ep_mem_access->composite_off; if (!offset || buf->ep_count != 1 || buf->sender_id != HOST_FFA_ID) { ret = FFA_RET_INVALID_PARAMETERS; goto out_unlock; @@ -504,6 +507,7 @@ static void do_ffa_mem_reclaim(struct arm_smccc_res *res, DECLARE_REG(u32, handle_lo, ctxt, 1); DECLARE_REG(u32, handle_hi, ctxt, 2); DECLARE_REG(u32, flags, ctxt, 3); + struct ffa_mem_region_attributes *ep_mem_access; struct ffa_composite_mem_region *reg; u32 offset, len, fraglen, fragoff; struct ffa_mem_region *buf; @@ -528,7 +532,9 @@ static void do_ffa_mem_reclaim(struct arm_smccc_res *res, len = res->a1; fraglen = res->a2; - offset = buf->ep_mem_access[0].composite_off; + ep_mem_access = (void *)buf + + ffa_mem_desc_offset(buf, 0, FFA_VERSION_1_0); + offset = ep_mem_access->composite_off; /* * We can trust the SPMD to get this right, but let's at least * check that we end up with something that doesn't look _completely_ diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index 9d70344127..8d0a5834e8 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -129,8 +129,8 @@ static void prepare_host_vtcr(void) parange = kvm_get_parange(id_aa64mmfr0_el1_sys_val); phys_shift = id_aa64mmfr0_parange_to_phys_shift(parange); - host_mmu.arch.vtcr = kvm_get_vtcr(id_aa64mmfr0_el1_sys_val, - id_aa64mmfr1_el1_sys_val, phys_shift); + host_mmu.arch.mmu.vtcr = kvm_get_vtcr(id_aa64mmfr0_el1_sys_val, + id_aa64mmfr1_el1_sys_val, phys_shift); } static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot); @@ -235,7 +235,7 @@ int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd) unsigned long nr_pages; int ret; - nr_pages = kvm_pgtable_stage2_pgd_size(vm->kvm.arch.vtcr) >> PAGE_SHIFT; + nr_pages = kvm_pgtable_stage2_pgd_size(mmu->vtcr) >> PAGE_SHIFT; ret = hyp_pool_init(&vm->pool, hyp_virt_to_pfn(pgd), nr_pages, 0); if (ret) return ret; @@ -295,7 +295,7 @@ int __pkvm_prot_finalize(void) return -EPERM; params->vttbr = kvm_get_vttbr(mmu); - params->vtcr = host_mmu.arch.vtcr; + params->vtcr = mmu->vtcr; params->hcr_el2 |= HCR_VM; /* diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c index 8033ef353a..9d23a51d7f 100644 --- a/arch/arm64/kvm/hyp/nvhe/pkvm.c +++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c @@ -303,7 +303,7 @@ static void init_pkvm_hyp_vm(struct kvm *host_kvm, struct pkvm_hyp_vm *hyp_vm, { hyp_vm->host_kvm = host_kvm; hyp_vm->kvm.created_vcpus = nr_vcpus; - hyp_vm->kvm.arch.vtcr = host_mmu.arch.vtcr; + hyp_vm->kvm.arch.mmu.vtcr = host_mmu.arch.mmu.vtcr; } static int init_pkvm_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu, @@ -483,7 +483,7 @@ int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva, } vm_size = pkvm_get_hyp_vm_size(nr_vcpus); - pgd_size = kvm_pgtable_stage2_pgd_size(host_mmu.arch.vtcr); + pgd_size = kvm_pgtable_stage2_pgd_size(host_mmu.arch.mmu.vtcr); ret = -ENOMEM; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index c353a06ee7..c50f8459e4 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -192,6 +192,7 @@ static const exit_handler_fn hyp_exit_handlers[] = { [ESR_ELx_EC_DABT_LOW] = kvm_hyp_handle_dabt_low, [ESR_ELx_EC_WATCHPT_LOW] = kvm_hyp_handle_watchpt_low, [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, + [ESR_ELx_EC_MOPS] = kvm_hyp_handle_mops, }; static const exit_handler_fn pvm_exit_handlers[] = { @@ -203,6 +204,7 @@ static const exit_handler_fn pvm_exit_handlers[] = { [ESR_ELx_EC_DABT_LOW] = kvm_hyp_handle_dabt_low, [ESR_ELx_EC_WATCHPT_LOW] = kvm_hyp_handle_watchpt_low, [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, + [ESR_ELx_EC_MOPS] = kvm_hyp_handle_mops, }; static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu) diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index f155b8c9e9..1966fdee74 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -401,7 +401,7 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep) if (device) return -EINVAL; - if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti()) + if (system_supports_bti_kernel()) attr |= KVM_PTE_LEAF_ATTR_HI_S1_GP; } else { attr |= KVM_PTE_LEAF_ATTR_HI_S1_XN; @@ -664,7 +664,7 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift) static bool stage2_has_fwb(struct kvm_pgtable *pgt) { - if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) + if (!cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) return false; return !(pgt->flags & KVM_PGTABLE_S2_NOFWB); @@ -1314,7 +1314,7 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr, ret = stage2_update_leaf_attrs(pgt, addr, 1, set, clr, NULL, &level, KVM_PGTABLE_WALK_HANDLE_FAULT | KVM_PGTABLE_WALK_SHARED); - if (!ret) + if (!ret || ret == -EAGAIN) kvm_call_hyp(__kvm_tlb_flush_vmid_ipa_nsh, pgt->mmu, addr, level); return ret; } @@ -1511,7 +1511,7 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu, kvm_pgtable_force_pte_cb_t force_pte_cb) { size_t pgd_sz; - u64 vtcr = mmu->arch->vtcr; + u64 vtcr = mmu->vtcr; u32 ia_bits = VTCR_EL2_IPA(vtcr); u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr); u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0; diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index 448b17080d..1581df6aec 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -137,12 +137,12 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu) NOKPROBE_SYMBOL(__deactivate_traps); /* - * Disable IRQs in {activate,deactivate}_traps_vhe_{load,put}() to + * Disable IRQs in __vcpu_{load,put}_{activate,deactivate}_traps() to * prevent a race condition between context switching of PMUSERENR_EL0 * in __{activate,deactivate}_traps_common() and IPIs that attempts to * update PMUSERENR_EL0. See also kvm_set_pmuserenr(). */ -void activate_traps_vhe_load(struct kvm_vcpu *vcpu) +static void __vcpu_load_activate_traps(struct kvm_vcpu *vcpu) { unsigned long flags; @@ -151,7 +151,7 @@ void activate_traps_vhe_load(struct kvm_vcpu *vcpu) local_irq_restore(flags); } -void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu) +static void __vcpu_put_deactivate_traps(struct kvm_vcpu *vcpu) { unsigned long flags; @@ -160,6 +160,19 @@ void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu) local_irq_restore(flags); } +void kvm_vcpu_load_vhe(struct kvm_vcpu *vcpu) +{ + __vcpu_load_switch_sysregs(vcpu); + __vcpu_load_activate_traps(vcpu); + __load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch); +} + +void kvm_vcpu_put_vhe(struct kvm_vcpu *vcpu) +{ + __vcpu_put_deactivate_traps(vcpu); + __vcpu_put_switch_sysregs(vcpu); +} + static const exit_handler_fn hyp_exit_handlers[] = { [0 ... ESR_ELx_EC_MAX] = NULL, [ESR_ELx_EC_CP15_32] = kvm_hyp_handle_cp15_32, @@ -170,6 +183,7 @@ static const exit_handler_fn hyp_exit_handlers[] = { [ESR_ELx_EC_DABT_LOW] = kvm_hyp_handle_dabt_low, [ESR_ELx_EC_WATCHPT_LOW] = kvm_hyp_handle_watchpt_low, [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, + [ESR_ELx_EC_MOPS] = kvm_hyp_handle_mops, }; static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu) @@ -214,17 +228,11 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu) sysreg_save_host_state_vhe(host_ctxt); /* - * ARM erratum 1165522 requires us to configure both stage 1 and - * stage 2 translation for the guest context before we clear - * HCR_EL2.TGE. - * - * We have already configured the guest's stage 1 translation in - * kvm_vcpu_load_sysregs_vhe above. We must now call - * __load_stage2 before __activate_traps, because - * __load_stage2 configures stage 2 translation, and - * __activate_traps clear HCR_EL2.TGE (among other things). + * Note that ARM erratum 1165522 requires us to configure both stage 1 + * and stage 2 translation for the guest context before we clear + * HCR_EL2.TGE. The stage 1 and stage 2 guest context has already been + * loaded on the CPU in kvm_vcpu_load_vhe(). */ - __load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch); __activate_traps(vcpu); __kvm_adjust_pc(vcpu); diff --git a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c index b35a178e7e..8e1e0d5033 100644 --- a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c @@ -52,7 +52,7 @@ void sysreg_restore_guest_state_vhe(struct kvm_cpu_context *ctxt) NOKPROBE_SYMBOL(sysreg_restore_guest_state_vhe); /** - * kvm_vcpu_load_sysregs_vhe - Load guest system registers to the physical CPU + * __vcpu_load_switch_sysregs - Load guest system registers to the physical CPU * * @vcpu: The VCPU pointer * @@ -62,7 +62,7 @@ NOKPROBE_SYMBOL(sysreg_restore_guest_state_vhe); * and loading system register state early avoids having to load them on * every entry to the VM. */ -void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu) +void __vcpu_load_switch_sysregs(struct kvm_vcpu *vcpu) { struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt; struct kvm_cpu_context *host_ctxt; @@ -92,12 +92,10 @@ void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu) __sysreg_restore_el1_state(guest_ctxt); vcpu_set_flag(vcpu, SYSREGS_ON_CPU); - - activate_traps_vhe_load(vcpu); } /** - * kvm_vcpu_put_sysregs_vhe - Restore host system registers to the physical CPU + * __vcpu_put_switch_syregs - Restore host system registers to the physical CPU * * @vcpu: The VCPU pointer * @@ -107,13 +105,12 @@ void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu) * and deferring saving system register state until we're no longer running the * VCPU avoids having to save them on every exit from the VM. */ -void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu) +void __vcpu_put_switch_sysregs(struct kvm_vcpu *vcpu) { struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt; struct kvm_cpu_context *host_ctxt; host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt; - deactivate_traps_vhe_put(vcpu); __sysreg_save_el1_state(guest_ctxt); __sysreg_save_user_state(guest_ctxt); diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c index 46bd43f61d..b636b4111d 100644 --- a/arch/arm64/kvm/hyp/vhe/tlb.c +++ b/arch/arm64/kvm/hyp/vhe/tlb.c @@ -11,18 +11,25 @@ #include <asm/tlbflush.h> struct tlb_inv_context { - unsigned long flags; - u64 tcr; - u64 sctlr; + struct kvm_s2_mmu *mmu; + unsigned long flags; + u64 tcr; + u64 sctlr; }; static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu, struct tlb_inv_context *cxt) { + struct kvm_vcpu *vcpu = kvm_get_running_vcpu(); u64 val; local_irq_save(cxt->flags); + if (vcpu && mmu != vcpu->arch.hw_mmu) + cxt->mmu = vcpu->arch.hw_mmu; + else + cxt->mmu = NULL; + if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) { /* * For CPUs that are affected by ARM errata 1165522 or 1530923, @@ -66,10 +73,13 @@ static void __tlb_switch_to_host(struct tlb_inv_context *cxt) * We're done with the TLB operation, let's restore the host's * view of HCR_EL2. */ - write_sysreg(0, vttbr_el2); write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2); isb(); + /* ... and the stage-2 MMU context that we switched away from */ + if (cxt->mmu) + __load_stage2(cxt->mmu, cxt->mmu->arch); + if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) { /* Restore the registers to what they were */ write_sysreg_el1(cxt->tcr, SYS_TCR); diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c index 7fb4df0456..5763d979d8 100644 --- a/arch/arm64/kvm/hypercalls.c +++ b/arch/arm64/kvm/hypercalls.c @@ -133,12 +133,10 @@ static bool kvm_smccc_test_fw_bmap(struct kvm_vcpu *vcpu, u32 func_id) ARM_SMCCC_SMC_64, \ 0, ARM_SMCCC_FUNC_MASK) -static void init_smccc_filter(struct kvm *kvm) +static int kvm_smccc_filter_insert_reserved(struct kvm *kvm) { int r; - mt_init(&kvm->arch.smccc_filter); - /* * Prevent userspace from handling any SMCCC calls in the architecture * range, avoiding the risk of misrepresenting Spectre mitigation status @@ -148,14 +146,25 @@ static void init_smccc_filter(struct kvm *kvm) SMC32_ARCH_RANGE_BEGIN, SMC32_ARCH_RANGE_END, xa_mk_value(KVM_SMCCC_FILTER_HANDLE), GFP_KERNEL_ACCOUNT); - WARN_ON_ONCE(r); + if (r) + goto out_destroy; r = mtree_insert_range(&kvm->arch.smccc_filter, SMC64_ARCH_RANGE_BEGIN, SMC64_ARCH_RANGE_END, xa_mk_value(KVM_SMCCC_FILTER_HANDLE), GFP_KERNEL_ACCOUNT); - WARN_ON_ONCE(r); + if (r) + goto out_destroy; + return 0; +out_destroy: + mtree_destroy(&kvm->arch.smccc_filter); + return r; +} + +static bool kvm_smccc_filter_configured(struct kvm *kvm) +{ + return !mtree_empty(&kvm->arch.smccc_filter); } static int kvm_smccc_set_filter(struct kvm *kvm, struct kvm_smccc_filter __user *uaddr) @@ -184,13 +193,14 @@ static int kvm_smccc_set_filter(struct kvm *kvm, struct kvm_smccc_filter __user goto out_unlock; } + if (!kvm_smccc_filter_configured(kvm)) { + r = kvm_smccc_filter_insert_reserved(kvm); + if (WARN_ON_ONCE(r)) + goto out_unlock; + } + r = mtree_insert_range(&kvm->arch.smccc_filter, start, end, xa_mk_value(filter.action), GFP_KERNEL_ACCOUNT); - if (r) - goto out_unlock; - - set_bit(KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED, &kvm->arch.flags); - out_unlock: mutex_unlock(&kvm->arch.config_lock); return r; @@ -201,7 +211,7 @@ static u8 kvm_smccc_filter_get_action(struct kvm *kvm, u32 func_id) unsigned long idx = func_id; void *val; - if (!test_bit(KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED, &kvm->arch.flags)) + if (!kvm_smccc_filter_configured(kvm)) return KVM_SMCCC_FILTER_HANDLE; /* @@ -387,7 +397,7 @@ void kvm_arm_init_hypercalls(struct kvm *kvm) smccc_feat->std_hyp_bmap = KVM_ARM_SMCCC_STD_HYP_FEATURES; smccc_feat->vendor_hyp_bmap = KVM_ARM_SMCCC_VENDOR_HYP_FEATURES; - init_smccc_filter(kvm); + mt_init(&kvm->arch.smccc_filter); } void kvm_arm_teardown_hypercalls(struct kvm *kvm) @@ -554,7 +564,7 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { bool wants_02; - wants_02 = test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features); + wants_02 = vcpu_has_feature(vcpu, KVM_ARM_VCPU_PSCI_0_2); switch (val) { case KVM_ARM_PSCI_0_1: diff --git a/arch/arm64/kvm/mmio.c b/arch/arm64/kvm/mmio.c index 3dd38a151d..200c8019a8 100644 --- a/arch/arm64/kvm/mmio.c +++ b/arch/arm64/kvm/mmio.c @@ -135,6 +135,9 @@ int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa) * volunteered to do so, and bail out otherwise. */ if (!kvm_vcpu_dabt_isvalid(vcpu)) { + trace_kvm_mmio_nisv(*vcpu_pc(vcpu), kvm_vcpu_get_esr(vcpu), + kvm_vcpu_get_hfar(vcpu), fault_ipa); + if (test_bit(KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER, &vcpu->kvm->arch.flags)) { run->exit_reason = KVM_EXIT_ARM_NISV; @@ -143,7 +146,6 @@ int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa) return 0; } - kvm_pr_unimpl("Data abort outside memslots with no valid syndrome info\n"); return -ENOSYS; } diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 482280fe22..d87c8fcc4c 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -892,7 +892,7 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long t mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); - kvm->arch.vtcr = kvm_get_vtcr(mmfr0, mmfr1, phys_shift); + mmu->vtcr = kvm_get_vtcr(mmfr0, mmfr1, phys_shift); if (mmu->pgt != NULL) { kvm_err("kvm_arch already initialized?\n"); @@ -1067,7 +1067,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, phys_addr_t addr; int ret = 0; struct kvm_mmu_memory_cache cache = { .gfp_zero = __GFP_ZERO }; - struct kvm_pgtable *pgt = kvm->arch.mmu.pgt; + struct kvm_s2_mmu *mmu = &kvm->arch.mmu; + struct kvm_pgtable *pgt = mmu->pgt; enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_DEVICE | KVM_PGTABLE_PROT_R | (writable ? KVM_PGTABLE_PROT_W : 0); @@ -1080,7 +1081,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, for (addr = guest_ipa; addr < guest_ipa + size; addr += PAGE_SIZE) { ret = kvm_mmu_topup_memory_cache(&cache, - kvm_mmu_cache_min_pages(kvm)); + kvm_mmu_cache_min_pages(mmu)); if (ret) break; @@ -1298,28 +1299,8 @@ transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot, if (sz < PMD_SIZE) return PAGE_SIZE; - /* - * The address we faulted on is backed by a transparent huge - * page. However, because we map the compound huge page and - * not the individual tail page, we need to transfer the - * refcount to the head page. We have to be careful that the - * THP doesn't start to split while we are adjusting the - * refcounts. - * - * We are sure this doesn't happen, because mmu_invalidate_retry - * was successful and we are holding the mmu_lock, so if this - * THP is trying to split, it will be blocked in the mmu - * notifier before touching any of the pages, specifically - * before being able to call __split_huge_page_refcount(). - * - * We can therefore safely transfer the refcount from PG_tail - * to PG_head and switch the pfn from a tail page to the head - * page accordingly. - */ *ipap &= PMD_MASK; - kvm_release_pfn_clean(pfn); pfn &= ~(PTRS_PER_PMD - 1); - get_page(pfn_to_page(pfn)); *pfnp = pfn; return PMD_SIZE; @@ -1431,7 +1412,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (fault_status != ESR_ELx_FSC_PERM || (logging_active && write_fault)) { ret = kvm_mmu_topup_memory_cache(memcache, - kvm_mmu_cache_min_pages(kvm)); + kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu)); if (ret) return ret; } @@ -1578,7 +1559,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (device) prot |= KVM_PGTABLE_PROT_DEVICE; - else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC)) + else if (cpus_have_final_cap(ARM64_HAS_CACHE_DIC)) prot |= KVM_PGTABLE_PROT_X; /* @@ -1747,7 +1728,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) } /* Userspace should not be able to register out-of-bounds IPAs */ - VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->kvm)); + VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->arch.hw_mmu)); if (fault_status == ESR_ELx_FSC_ACCESS) { handle_access_fault(vcpu, fault_ipa); @@ -2021,7 +2002,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, * Prevent userspace from creating a memory region outside of the IPA * space addressable by the KVM guest IPA space. */ - if ((new->base_gfn + new->npages) > (kvm_phys_size(kvm) >> PAGE_SHIFT)) + if ((new->base_gfn + new->npages) > (kvm_phys_size(&kvm->arch.mmu) >> PAGE_SHIFT)) return -EFAULT; hva = new->userspace_addr; diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c index 6ff3ec18c9..b7be96a535 100644 --- a/arch/arm64/kvm/pkvm.c +++ b/arch/arm64/kvm/pkvm.c @@ -101,6 +101,17 @@ void __init kvm_hyp_reserve(void) hyp_mem_base); } +static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm) +{ + if (host_kvm->arch.pkvm.handle) { + WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm, + host_kvm->arch.pkvm.handle)); + } + + host_kvm->arch.pkvm.handle = 0; + free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc); +} + /* * Allocates and donates memory for hypervisor VM structs at EL2. * @@ -123,7 +134,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm) if (host_kvm->created_vcpus < 1) return -EINVAL; - pgd_sz = kvm_pgtable_stage2_pgd_size(host_kvm->arch.vtcr); + pgd_sz = kvm_pgtable_stage2_pgd_size(host_kvm->arch.mmu.vtcr); /* * The PGD pages will be reclaimed using a hyp_memcache which implies @@ -181,7 +192,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm) return 0; destroy_vm: - pkvm_destroy_hyp_vm(host_kvm); + __pkvm_destroy_hyp_vm(host_kvm); return ret; free_vm: free_pages_exact(hyp_vm, hyp_vm_sz); @@ -194,23 +205,19 @@ int pkvm_create_hyp_vm(struct kvm *host_kvm) { int ret = 0; - mutex_lock(&host_kvm->lock); + mutex_lock(&host_kvm->arch.config_lock); if (!host_kvm->arch.pkvm.handle) ret = __pkvm_create_hyp_vm(host_kvm); - mutex_unlock(&host_kvm->lock); + mutex_unlock(&host_kvm->arch.config_lock); return ret; } void pkvm_destroy_hyp_vm(struct kvm *host_kvm) { - if (host_kvm->arch.pkvm.handle) { - WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm, - host_kvm->arch.pkvm.handle)); - } - - host_kvm->arch.pkvm.handle = 0; - free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc); + mutex_lock(&host_kvm->arch.config_lock); + __pkvm_destroy_hyp_vm(host_kvm); + mutex_unlock(&host_kvm->arch.config_lock); } int pkvm_init_host_vm(struct kvm *host_kvm) diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index 6b066e04dc..fe99b3dab6 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -60,6 +60,23 @@ static u32 kvm_pmu_event_mask(struct kvm *kvm) return __kvm_pmu_event_mask(pmuver); } +u64 kvm_pmu_evtyper_mask(struct kvm *kvm) +{ + u64 mask = ARMV8_PMU_EXCLUDE_EL1 | ARMV8_PMU_EXCLUDE_EL0 | + kvm_pmu_event_mask(kvm); + u64 pfr0 = IDREG(kvm, SYS_ID_AA64PFR0_EL1); + + if (SYS_FIELD_GET(ID_AA64PFR0_EL1, EL2, pfr0)) + mask |= ARMV8_PMU_INCLUDE_EL2; + + if (SYS_FIELD_GET(ID_AA64PFR0_EL1, EL3, pfr0)) + mask |= ARMV8_PMU_EXCLUDE_NS_EL0 | + ARMV8_PMU_EXCLUDE_NS_EL1 | + ARMV8_PMU_EXCLUDE_EL3; + + return mask; +} + /** * kvm_pmc_is_64bit - determine if counter is 64bit * @pmc: counter context @@ -72,7 +89,7 @@ static bool kvm_pmc_is_64bit(struct kvm_pmc *pmc) static bool kvm_pmc_has_64bit_overflow(struct kvm_pmc *pmc) { - u64 val = __vcpu_sys_reg(kvm_pmc_to_vcpu(pmc), PMCR_EL0); + u64 val = kvm_vcpu_read_pmcr(kvm_pmc_to_vcpu(pmc)); return (pmc->idx < ARMV8_PMU_CYCLE_IDX && (val & ARMV8_PMU_PMCR_LP)) || (pmc->idx == ARMV8_PMU_CYCLE_IDX && (val & ARMV8_PMU_PMCR_LC)); @@ -250,7 +267,7 @@ void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu) u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu) { - u64 val = __vcpu_sys_reg(vcpu, PMCR_EL0) >> ARMV8_PMU_PMCR_N_SHIFT; + u64 val = kvm_vcpu_read_pmcr(vcpu) >> ARMV8_PMU_PMCR_N_SHIFT; val &= ARMV8_PMU_PMCR_N_MASK; if (val == 0) @@ -272,7 +289,7 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val) if (!kvm_vcpu_has_pmu(vcpu)) return; - if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val) + if (!(kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E) || !val) return; for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) { @@ -324,7 +341,7 @@ static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu) { u64 reg = 0; - if ((__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) { + if ((kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E)) { reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0); reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0); reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1); @@ -348,7 +365,7 @@ static void kvm_pmu_update_state(struct kvm_vcpu *vcpu) pmu->irq_level = overflow; if (likely(irqchip_in_kernel(vcpu->kvm))) { - int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id, + int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu, pmu->irq_num, overflow, pmu); WARN_ON(ret); } @@ -426,7 +443,7 @@ static void kvm_pmu_counter_increment(struct kvm_vcpu *vcpu, { int i; - if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) + if (!(kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E)) return; /* Weed out disabled counters */ @@ -569,7 +586,7 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc) { struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc); - return (__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) && + return (kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E) && (__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & BIT(pmc->idx)); } @@ -584,6 +601,7 @@ static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc) struct perf_event *event; struct perf_event_attr attr; u64 eventsel, reg, data; + bool p, u, nsk, nsu; reg = counter_index_to_evtreg(pmc->idx); data = __vcpu_sys_reg(vcpu, reg); @@ -610,13 +628,18 @@ static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc) !test_bit(eventsel, vcpu->kvm->arch.pmu_filter)) return; + p = data & ARMV8_PMU_EXCLUDE_EL1; + u = data & ARMV8_PMU_EXCLUDE_EL0; + nsk = data & ARMV8_PMU_EXCLUDE_NS_EL1; + nsu = data & ARMV8_PMU_EXCLUDE_NS_EL0; + memset(&attr, 0, sizeof(struct perf_event_attr)); attr.type = arm_pmu->pmu.type; attr.size = sizeof(attr); attr.pinned = 1; attr.disabled = !kvm_pmu_counter_is_enabled(pmc); - attr.exclude_user = data & ARMV8_PMU_EXCLUDE_EL0 ? 1 : 0; - attr.exclude_kernel = data & ARMV8_PMU_EXCLUDE_EL1 ? 1 : 0; + attr.exclude_user = (u != nsu); + attr.exclude_kernel = (p != nsk); attr.exclude_hv = 1; /* Don't count EL2 events */ attr.exclude_host = 1; /* Don't count host events */ attr.config = eventsel; @@ -657,18 +680,13 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data, u64 select_idx) { struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, select_idx); - u64 reg, mask; + u64 reg; if (!kvm_vcpu_has_pmu(vcpu)) return; - mask = ARMV8_PMU_EVTYPE_MASK; - mask &= ~ARMV8_PMU_EVTYPE_EVENT; - mask |= kvm_pmu_event_mask(vcpu->kvm); - reg = counter_index_to_evtreg(pmc->idx); - - __vcpu_sys_reg(vcpu, reg) = data & mask; + __vcpu_sys_reg(vcpu, reg) = data & kvm_pmu_evtyper_mask(vcpu->kvm); kvm_pmu_create_perf_event(pmc); } @@ -717,10 +735,9 @@ static struct arm_pmu *kvm_pmu_probe_armpmu(void) * It is still necessary to get a valid cpu, though, to probe for the * default PMU instance as userspace is not required to specify a PMU * type. In order to uphold the preexisting behavior KVM selects the - * PMU instance for the core where the first call to the - * KVM_ARM_VCPU_PMU_V3_CTRL attribute group occurs. A dependent use case - * would be a user with disdain of all things big.LITTLE that affines - * the VMM to a particular cluster of cores. + * PMU instance for the core during vcpu init. A dependent use + * case would be a user with disdain of all things big.LITTLE that + * affines the VMM to a particular cluster of cores. * * In any case, userspace should just do the sane thing and use the UAPI * to select a PMU type directly. But, be wary of the baggage being @@ -786,6 +803,17 @@ u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1) return val & mask; } +void kvm_vcpu_reload_pmu(struct kvm_vcpu *vcpu) +{ + u64 mask = kvm_pmu_valid_counter_mask(vcpu); + + kvm_pmu_handle_pmcr(vcpu, kvm_vcpu_read_pmcr(vcpu)); + + __vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= mask; + __vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= mask; + __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= mask; +} + int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu) { if (!kvm_vcpu_has_pmu(vcpu)) @@ -874,6 +902,52 @@ static bool pmu_irq_is_valid(struct kvm *kvm, int irq) return true; } +/** + * kvm_arm_pmu_get_max_counters - Return the max number of PMU counters. + * @kvm: The kvm pointer + */ +u8 kvm_arm_pmu_get_max_counters(struct kvm *kvm) +{ + struct arm_pmu *arm_pmu = kvm->arch.arm_pmu; + + /* + * The arm_pmu->num_events considers the cycle counter as well. + * Ignore that and return only the general-purpose counters. + */ + return arm_pmu->num_events - 1; +} + +static void kvm_arm_set_pmu(struct kvm *kvm, struct arm_pmu *arm_pmu) +{ + lockdep_assert_held(&kvm->arch.config_lock); + + kvm->arch.arm_pmu = arm_pmu; + kvm->arch.pmcr_n = kvm_arm_pmu_get_max_counters(kvm); +} + +/** + * kvm_arm_set_default_pmu - No PMU set, get the default one. + * @kvm: The kvm pointer + * + * The observant among you will notice that the supported_cpus + * mask does not get updated for the default PMU even though it + * is quite possible the selected instance supports only a + * subset of cores in the system. This is intentional, and + * upholds the preexisting behavior on heterogeneous systems + * where vCPUs can be scheduled on any core but the guest + * counters could stop working. + */ +int kvm_arm_set_default_pmu(struct kvm *kvm) +{ + struct arm_pmu *arm_pmu = kvm_pmu_probe_armpmu(); + + if (!arm_pmu) + return -ENODEV; + + kvm_arm_set_pmu(kvm, arm_pmu); + return 0; +} + static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id) { struct kvm *kvm = vcpu->kvm; @@ -893,7 +967,7 @@ static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id) break; } - kvm->arch.arm_pmu = arm_pmu; + kvm_arm_set_pmu(kvm, arm_pmu); cpumask_copy(kvm->arch.supported_cpus, &arm_pmu->supported_cpus); ret = 0; break; @@ -916,23 +990,6 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) if (vcpu->arch.pmu.created) return -EBUSY; - if (!kvm->arch.arm_pmu) { - /* - * No PMU set, get the default one. - * - * The observant among you will notice that the supported_cpus - * mask does not get updated for the default PMU even though it - * is quite possible the selected instance supports only a - * subset of cores in the system. This is intentional, and - * upholds the preexisting behavior on heterogeneous systems - * where vCPUs can be scheduled on any core but the guest - * counters could stop working. - */ - kvm->arch.arm_pmu = kvm_pmu_probe_armpmu(); - if (!kvm->arch.arm_pmu) - return -ENODEV; - } - switch (attr->attr) { case KVM_ARM_VCPU_PMU_V3_IRQ: { int __user *uaddr = (int __user *)(long)attr->addr; @@ -1072,3 +1129,15 @@ u8 kvm_arm_pmu_get_pmuver_limit(void) ID_AA64DFR0_EL1_PMUVer_V3P5); return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), tmp); } + +/** + * kvm_vcpu_read_pmcr - Read PMCR_EL0 register for the vCPU + * @vcpu: The vcpu pointer + */ +u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu) +{ + u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0) & + ~(ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT); + + return pmcr | ((u64)vcpu->kvm->arch.pmcr_n << ARMV8_PMU_PMCR_N_SHIFT); +} diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index 7a65a35ee4..5bb4de162c 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -73,11 +73,8 @@ int __init kvm_arm_init_sve(void) return 0; } -static int kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu) +static void kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu) { - if (!system_supports_sve()) - return -EINVAL; - vcpu->arch.sve_max_vl = kvm_sve_max_vl; /* @@ -86,8 +83,6 @@ static int kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu) * kvm_arm_vcpu_finalize(), which freezes the configuration. */ vcpu_set_flag(vcpu, GUEST_HAS_SVE); - - return 0; } /* @@ -170,20 +165,9 @@ static void kvm_vcpu_reset_sve(struct kvm_vcpu *vcpu) memset(vcpu->arch.sve_state, 0, vcpu_sve_state_size(vcpu)); } -static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu) +static void kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu) { - /* - * For now make sure that both address/generic pointer authentication - * features are requested by the userspace together and the system - * supports these capabilities. - */ - if (!test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) || - !test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features) || - !system_has_full_ptr_auth()) - return -EINVAL; - vcpu_set_flag(vcpu, GUEST_HAS_PTRAUTH); - return 0; } /** @@ -204,10 +188,9 @@ static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu) * disable preemption around the vcpu reset as we would otherwise race with * preempt notifiers which also call put/load. */ -int kvm_reset_vcpu(struct kvm_vcpu *vcpu) +void kvm_reset_vcpu(struct kvm_vcpu *vcpu) { struct vcpu_reset_state reset_state; - int ret; bool loaded; u32 pstate; @@ -224,29 +207,16 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) if (loaded) kvm_arch_vcpu_put(vcpu); - /* Disallow NV+SVE for the time being */ - if (vcpu_has_nv(vcpu) && vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) { - ret = -EINVAL; - goto out; - } - if (!kvm_arm_vcpu_sve_finalized(vcpu)) { - if (test_bit(KVM_ARM_VCPU_SVE, vcpu->arch.features)) { - ret = kvm_vcpu_enable_sve(vcpu); - if (ret) - goto out; - } + if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) + kvm_vcpu_enable_sve(vcpu); } else { kvm_vcpu_reset_sve(vcpu); } - if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) || - test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features)) { - if (kvm_vcpu_enable_ptrauth(vcpu)) { - ret = -EINVAL; - goto out; - } - } + if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_ADDRESS) || + vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_GENERIC)) + kvm_vcpu_enable_ptrauth(vcpu); if (vcpu_el1_is_32bit(vcpu)) pstate = VCPU_RESET_PSTATE_SVC; @@ -255,11 +225,6 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) else pstate = VCPU_RESET_PSTATE_EL1; - if (kvm_vcpu_has_pmu(vcpu) && !kvm_arm_support_pmu_v3()) { - ret = -EINVAL; - goto out; - } - /* Reset core registers */ memset(vcpu_gp_regs(vcpu), 0, sizeof(*vcpu_gp_regs(vcpu))); memset(&vcpu->arch.ctxt.fp_regs, 0, sizeof(vcpu->arch.ctxt.fp_regs)); @@ -294,12 +259,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset timer */ - ret = kvm_timer_vcpu_reset(vcpu); -out: + kvm_timer_vcpu_reset(vcpu); + if (loaded) kvm_arch_vcpu_load(vcpu, smp_processor_id()); preempt_enable(); - return ret; } u32 get_kvm_ipa_limit(void) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 0afd6136e2..4735e1b37f 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -207,7 +207,7 @@ static bool access_dcsw(struct kvm_vcpu *vcpu, * CPU left in the system, and certainly not from non-secure * software). */ - if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) + if (!cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) kvm_set_way_flush(vcpu); return true; @@ -379,7 +379,7 @@ static bool trap_loregion(struct kvm_vcpu *vcpu, struct sys_reg_params *p, const struct sys_reg_desc *r) { - u64 val = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); + u64 val = IDREG(vcpu->kvm, SYS_ID_AA64MMFR1_EL1); u32 sr = reg_to_encoding(r); if (!(val & (0xfUL << ID_AA64MMFR1_EL1_LO_SHIFT))) { @@ -719,14 +719,9 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu, static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { - u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX); + u64 mask = BIT(ARMV8_PMU_CYCLE_IDX); + u8 n = vcpu->kvm->arch.pmcr_n; - /* No PMU available, any PMU reg may UNDEF... */ - if (!kvm_arm_support_pmu_v3()) - return 0; - - n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT; - n &= ARMV8_PMU_PMCR_N_MASK; if (n) mask |= GENMASK(n - 1, 0); @@ -746,8 +741,12 @@ static u64 reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { + /* This thing will UNDEF, who cares about the reset value? */ + if (!kvm_vcpu_has_pmu(vcpu)) + return 0; + reset_unknown(vcpu, r); - __vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_EVTYPE_MASK; + __vcpu_sys_reg(vcpu, r->reg) &= kvm_pmu_evtyper_mask(vcpu->kvm); return __vcpu_sys_reg(vcpu, r->reg); } @@ -762,17 +761,15 @@ static u64 reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) static u64 reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { - u64 pmcr; + u64 pmcr = 0; - /* No PMU available, PMCR_EL0 may UNDEF... */ - if (!kvm_arm_support_pmu_v3()) - return 0; - - /* Only preserve PMCR_EL0.N, and reset the rest to 0 */ - pmcr = read_sysreg(pmcr_el0) & (ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT); if (!kvm_supports_32bit_el0()) pmcr |= ARMV8_PMU_PMCR_LC; + /* + * The value of PMCR.N field is included when the + * vCPU register is read via kvm_vcpu_read_pmcr(). + */ __vcpu_sys_reg(vcpu, r->reg) = pmcr; return __vcpu_sys_reg(vcpu, r->reg); @@ -822,7 +819,7 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, * Only update writeable bits of PMCR (continuing into * kvm_pmu_handle_pmcr() as well) */ - val = __vcpu_sys_reg(vcpu, PMCR_EL0); + val = kvm_vcpu_read_pmcr(vcpu); val &= ~ARMV8_PMU_PMCR_MASK; val |= p->regval & ARMV8_PMU_PMCR_MASK; if (!kvm_supports_32bit_el0()) @@ -830,7 +827,7 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, kvm_pmu_handle_pmcr(vcpu, val); } else { /* PMCR.P & PMCR.C are RAZ */ - val = __vcpu_sys_reg(vcpu, PMCR_EL0) + val = kvm_vcpu_read_pmcr(vcpu) & ~(ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C); p->regval = val; } @@ -879,7 +876,7 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx) { u64 pmcr, val; - pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0); + pmcr = kvm_vcpu_read_pmcr(vcpu); val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK; if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) { kvm_inject_undefined(vcpu); @@ -988,12 +985,45 @@ static bool access_pmu_evtyper(struct kvm_vcpu *vcpu, struct sys_reg_params *p, kvm_pmu_set_counter_event_type(vcpu, p->regval, idx); kvm_vcpu_pmu_restore_guest(vcpu); } else { - p->regval = __vcpu_sys_reg(vcpu, reg) & ARMV8_PMU_EVTYPE_MASK; + p->regval = __vcpu_sys_reg(vcpu, reg); } return true; } +static int set_pmreg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 val) +{ + bool set; + + val &= kvm_pmu_valid_counter_mask(vcpu); + + switch (r->reg) { + case PMOVSSET_EL0: + /* CRm[1] being set indicates a SET register, and CLR otherwise */ + set = r->CRm & 2; + break; + default: + /* Op2[0] being set indicates a SET register, and CLR otherwise */ + set = r->Op2 & 1; + break; + } + + if (set) + __vcpu_sys_reg(vcpu, r->reg) |= val; + else + __vcpu_sys_reg(vcpu, r->reg) &= ~val; + + return 0; +} + +static int get_pmreg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 *val) +{ + u64 mask = kvm_pmu_valid_counter_mask(vcpu); + + *val = __vcpu_sys_reg(vcpu, r->reg) & mask; + return 0; +} + static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p, const struct sys_reg_desc *r) { @@ -1103,6 +1133,51 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, return true; } +static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, + u64 *val) +{ + *val = kvm_vcpu_read_pmcr(vcpu); + return 0; +} + +static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, + u64 val) +{ + u8 new_n = (val >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK; + struct kvm *kvm = vcpu->kvm; + + mutex_lock(&kvm->arch.config_lock); + + /* + * The vCPU can't have more counters than the PMU hardware + * implements. Ignore this error to maintain compatibility + * with the existing KVM behavior. + */ + if (!kvm_vm_has_ran_once(kvm) && + new_n <= kvm_arm_pmu_get_max_counters(kvm)) + kvm->arch.pmcr_n = new_n; + + mutex_unlock(&kvm->arch.config_lock); + + /* + * Ignore writes to RES0 bits, read only bits that are cleared on + * vCPU reset, and writable bits that KVM doesn't support yet. + * (i.e. only PMCR.N and bits [7:0] are mutable from userspace) + * The LP bit is RES0 when FEAT_PMUv3p5 is not supported on the vCPU. + * But, we leave the bit as it is here, as the vCPU's PMUver might + * be changed later (NOTE: the bit will be cleared on first vCPU run + * if necessary). + */ + val &= ARMV8_PMU_PMCR_MASK; + + /* The LC bit is RES1 when AArch32 is not supported */ + if (!kvm_supports_32bit_el0()) + val |= ARMV8_PMU_PMCR_LC; + + __vcpu_sys_reg(vcpu, r->reg) = val; + return 0; +} + /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */ #define DBG_BCR_BVR_WCR_WVR_EL1(n) \ { SYS_DESC(SYS_DBGBVRn_EL1(n)), \ @@ -1216,8 +1291,14 @@ static s64 kvm_arm64_ftr_safe_value(u32 id, const struct arm64_ftr_bits *ftrp, /* Some features have different safe value type in KVM than host features */ switch (id) { case SYS_ID_AA64DFR0_EL1: - if (kvm_ftr.shift == ID_AA64DFR0_EL1_PMUVer_SHIFT) + switch (kvm_ftr.shift) { + case ID_AA64DFR0_EL1_PMUVer_SHIFT: + kvm_ftr.type = FTR_LOWER_SAFE; + break; + case ID_AA64DFR0_EL1_DebugVer_SHIFT: kvm_ftr.type = FTR_LOWER_SAFE; + break; + } break; case SYS_ID_DFR0_EL1: if (kvm_ftr.shift == ID_DFR0_EL1_PerfMon_SHIFT) @@ -1228,7 +1309,7 @@ static s64 kvm_arm64_ftr_safe_value(u32 id, const struct arm64_ftr_bits *ftrp, return arm64_ftr_safe_value(&kvm_ftr, new, cur); } -/** +/* * arm64_check_features() - Check if a feature register value constitutes * a subset of features indicated by the idreg's KVM sanitised limit. * @@ -1338,7 +1419,6 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu, ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3)); if (!cpus_have_final_cap(ARM64_HAS_WFXT)) val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_WFxT); - val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS); break; case SYS_ID_AA64MMFR2_EL1: val &= ~ID_AA64MMFR2_EL1_CCIDX_MASK; @@ -1373,6 +1453,13 @@ static inline bool is_id_reg(u32 id) sys_reg_CRm(id) < 8); } +static inline bool is_aa32_id_reg(u32 id) +{ + return (sys_reg_Op0(id) == 3 && sys_reg_Op1(id) == 0 && + sys_reg_CRn(id) == 0 && sys_reg_CRm(id) >= 1 && + sys_reg_CRm(id) <= 3); +} + static unsigned int id_visibility(const struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { @@ -1469,14 +1556,21 @@ static u64 read_sanitised_id_aa64pfr0_el1(struct kvm_vcpu *vcpu, return val; } +#define ID_REG_LIMIT_FIELD_ENUM(val, reg, field, limit) \ +({ \ + u64 __f_val = FIELD_GET(reg##_##field##_MASK, val); \ + (val) &= ~reg##_##field##_MASK; \ + (val) |= FIELD_PREP(reg##_##field##_MASK, \ + min(__f_val, (u64)reg##_##field##_##limit)); \ + (val); \ +}) + static u64 read_sanitised_id_aa64dfr0_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd) { u64 val = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); - /* Limit debug to ARMv8.0 */ - val &= ~ID_AA64DFR0_EL1_DebugVer_MASK; - val |= SYS_FIELD_PREP_ENUM(ID_AA64DFR0_EL1, DebugVer, IMP); + val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64DFR0_EL1, DebugVer, V8P8); /* * Only initialize the PMU version if the vCPU was configured with one. @@ -1496,6 +1590,7 @@ static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, u64 val) { + u8 debugver = SYS_FIELD_GET(ID_AA64DFR0_EL1, DebugVer, val); u8 pmuver = SYS_FIELD_GET(ID_AA64DFR0_EL1, PMUVer, val); /* @@ -1515,6 +1610,13 @@ static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu, if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF) val &= ~ID_AA64DFR0_EL1_PMUVer_MASK; + /* + * ID_AA64DFR0_EL1.DebugVer is one of those awkward fields with a + * nonzero minimum safe value. + */ + if (debugver < ID_AA64DFR0_EL1_DebugVer_IMP) + return -EINVAL; + return set_id_reg(vcpu, rd, val); } @@ -1528,6 +1630,8 @@ static u64 read_sanitised_id_dfr0_el1(struct kvm_vcpu *vcpu, if (kvm_vcpu_has_pmu(vcpu)) val |= SYS_FIELD_PREP(ID_DFR0_EL1, PerfMon, perfmon); + val = ID_REG_LIMIT_FIELD_ENUM(val, ID_DFR0_EL1, CopDbg, Debugv8p8); + return val; } @@ -1536,6 +1640,7 @@ static int set_id_dfr0_el1(struct kvm_vcpu *vcpu, u64 val) { u8 perfmon = SYS_FIELD_GET(ID_DFR0_EL1, PerfMon, val); + u8 copdbg = SYS_FIELD_GET(ID_DFR0_EL1, CopDbg, val); if (perfmon == ID_DFR0_EL1_PerfMon_IMPDEF) { val &= ~ID_DFR0_EL1_PerfMon_MASK; @@ -1551,6 +1656,9 @@ static int set_id_dfr0_el1(struct kvm_vcpu *vcpu, if (perfmon != 0 && perfmon < ID_DFR0_EL1_PerfMon_PMUv3) return -EINVAL; + if (copdbg < ID_DFR0_EL1_CopDbg_Armv8) + return -EINVAL; + return set_id_reg(vcpu, rd, val); } @@ -1791,8 +1899,8 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu, * HCR_EL2.E2H==1, and only in the sysreg table for convenience of * handling traps. Given that, they are always hidden from userspace. */ -static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu, - const struct sys_reg_desc *rd) +static unsigned int hidden_user_visibility(const struct kvm_vcpu *vcpu, + const struct sys_reg_desc *rd) { return REG_HIDDEN_USER; } @@ -1803,7 +1911,7 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu, .reset = rst, \ .reg = name##_EL1, \ .val = v, \ - .visibility = elx2_visibility, \ + .visibility = hidden_user_visibility, \ } /* @@ -1817,11 +1925,14 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu, * from userspace. */ -/* sys_reg_desc initialiser for known cpufeature ID registers */ -#define ID_SANITISED(name) { \ +#define ID_DESC(name) \ SYS_DESC(SYS_##name), \ .access = access_id_reg, \ - .get_user = get_id_reg, \ + .get_user = get_id_reg \ + +/* sys_reg_desc initialiser for known cpufeature ID registers */ +#define ID_SANITISED(name) { \ + ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = id_visibility, \ .reset = kvm_read_sanitised_id_reg, \ @@ -1830,15 +1941,22 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu, /* sys_reg_desc initialiser for known cpufeature ID registers */ #define AA32_ID_SANITISED(name) { \ - SYS_DESC(SYS_##name), \ - .access = access_id_reg, \ - .get_user = get_id_reg, \ + ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = aa32_id_visibility, \ .reset = kvm_read_sanitised_id_reg, \ .val = 0, \ } +/* sys_reg_desc initialiser for writable ID registers */ +#define ID_WRITABLE(name, mask) { \ + ID_DESC(name), \ + .set_user = set_id_reg, \ + .visibility = id_visibility, \ + .reset = kvm_read_sanitised_id_reg, \ + .val = mask, \ +} + /* * sys_reg_desc initialiser for architecturally unallocated cpufeature ID * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2 @@ -1860,9 +1978,7 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu, * RAZ for the guest. */ #define ID_HIDDEN(name) { \ - SYS_DESC(SYS_##name), \ - .access = access_id_reg, \ - .get_user = get_id_reg, \ + ID_DESC(name), \ .set_user = set_id_reg, \ .visibility = raz_visibility, \ .reset = kvm_read_sanitised_id_reg, \ @@ -1961,7 +2077,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { // DBGDTR[TR]X_EL0 share the same encoding { SYS_DESC(SYS_DBGDTRTX_EL0), trap_raz_wi }, - { SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 }, + { SYS_DESC(SYS_DBGVCR32_EL2), trap_undef, reset_val, DBGVCR32_EL2, 0 }, { SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 }, @@ -1980,7 +2096,8 @@ static const struct sys_reg_desc sys_reg_descs[] = { .set_user = set_id_dfr0_el1, .visibility = aa32_id_visibility, .reset = read_sanitised_id_dfr0_el1, - .val = ID_DFR0_EL1_PerfMon_MASK, }, + .val = ID_DFR0_EL1_PerfMon_MASK | + ID_DFR0_EL1_CopDbg_MASK, }, ID_HIDDEN(ID_AFR0_EL1), AA32_ID_SANITISED(ID_MMFR0_EL1), AA32_ID_SANITISED(ID_MMFR1_EL1), @@ -2014,11 +2131,17 @@ static const struct sys_reg_desc sys_reg_descs[] = { .get_user = get_id_reg, .set_user = set_id_reg, .reset = read_sanitised_id_aa64pfr0_el1, - .val = ID_AA64PFR0_EL1_CSV2_MASK | ID_AA64PFR0_EL1_CSV3_MASK, }, + .val = ~(ID_AA64PFR0_EL1_AMU | + ID_AA64PFR0_EL1_MPAM | + ID_AA64PFR0_EL1_SVE | + ID_AA64PFR0_EL1_RAS | + ID_AA64PFR0_EL1_GIC | + ID_AA64PFR0_EL1_AdvSIMD | + ID_AA64PFR0_EL1_FP), }, ID_SANITISED(ID_AA64PFR1_EL1), ID_UNALLOCATED(4,2), ID_UNALLOCATED(4,3), - ID_SANITISED(ID_AA64ZFR0_EL1), + ID_WRITABLE(ID_AA64ZFR0_EL1, ~ID_AA64ZFR0_EL1_RES0), ID_HIDDEN(ID_AA64SMFR0_EL1), ID_UNALLOCATED(4,6), ID_UNALLOCATED(4,7), @@ -2029,7 +2152,8 @@ static const struct sys_reg_desc sys_reg_descs[] = { .get_user = get_id_reg, .set_user = set_id_aa64dfr0_el1, .reset = read_sanitised_id_aa64dfr0_el1, - .val = ID_AA64DFR0_EL1_PMUVer_MASK, }, + .val = ID_AA64DFR0_EL1_PMUVer_MASK | + ID_AA64DFR0_EL1_DebugVer_MASK, }, ID_SANITISED(ID_AA64DFR1_EL1), ID_UNALLOCATED(5,2), ID_UNALLOCATED(5,3), @@ -2039,9 +2163,14 @@ static const struct sys_reg_desc sys_reg_descs[] = { ID_UNALLOCATED(5,7), /* CRm=6 */ - ID_SANITISED(ID_AA64ISAR0_EL1), - ID_SANITISED(ID_AA64ISAR1_EL1), - ID_SANITISED(ID_AA64ISAR2_EL1), + ID_WRITABLE(ID_AA64ISAR0_EL1, ~ID_AA64ISAR0_EL1_RES0), + ID_WRITABLE(ID_AA64ISAR1_EL1, ~(ID_AA64ISAR1_EL1_GPI | + ID_AA64ISAR1_EL1_GPA | + ID_AA64ISAR1_EL1_API | + ID_AA64ISAR1_EL1_APA)), + ID_WRITABLE(ID_AA64ISAR2_EL1, ~(ID_AA64ISAR2_EL1_RES0 | + ID_AA64ISAR2_EL1_APA3 | + ID_AA64ISAR2_EL1_GPA3)), ID_UNALLOCATED(6,3), ID_UNALLOCATED(6,4), ID_UNALLOCATED(6,5), @@ -2049,9 +2178,23 @@ static const struct sys_reg_desc sys_reg_descs[] = { ID_UNALLOCATED(6,7), /* CRm=7 */ - ID_SANITISED(ID_AA64MMFR0_EL1), - ID_SANITISED(ID_AA64MMFR1_EL1), - ID_SANITISED(ID_AA64MMFR2_EL1), + ID_WRITABLE(ID_AA64MMFR0_EL1, ~(ID_AA64MMFR0_EL1_RES0 | + ID_AA64MMFR0_EL1_TGRAN4_2 | + ID_AA64MMFR0_EL1_TGRAN64_2 | + ID_AA64MMFR0_EL1_TGRAN16_2)), + ID_WRITABLE(ID_AA64MMFR1_EL1, ~(ID_AA64MMFR1_EL1_RES0 | + ID_AA64MMFR1_EL1_HCX | + ID_AA64MMFR1_EL1_XNX | + ID_AA64MMFR1_EL1_TWED | + ID_AA64MMFR1_EL1_XNX | + ID_AA64MMFR1_EL1_VH | + ID_AA64MMFR1_EL1_VMIDBits)), + ID_WRITABLE(ID_AA64MMFR2_EL1, ~(ID_AA64MMFR2_EL1_RES0 | + ID_AA64MMFR2_EL1_EVT | + ID_AA64MMFR2_EL1_FWB | + ID_AA64MMFR2_EL1_IDS | + ID_AA64MMFR2_EL1_NV | + ID_AA64MMFR2_EL1_CCIDX)), ID_SANITISED(ID_AA64MMFR3_EL1), ID_UNALLOCATED(7,4), ID_UNALLOCATED(7,5), @@ -2116,9 +2259,11 @@ static const struct sys_reg_desc sys_reg_descs[] = { /* PMBIDR_EL1 is not trapped */ { PMU_SYS_REG(PMINTENSET_EL1), - .access = access_pminten, .reg = PMINTENSET_EL1 }, + .access = access_pminten, .reg = PMINTENSET_EL1, + .get_user = get_pmreg, .set_user = set_pmreg }, { PMU_SYS_REG(PMINTENCLR_EL1), - .access = access_pminten, .reg = PMINTENSET_EL1 }, + .access = access_pminten, .reg = PMINTENSET_EL1, + .get_user = get_pmreg, .set_user = set_pmreg }, { SYS_DESC(SYS_PMMIR_EL1), trap_raz_wi }, { SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 }, @@ -2166,14 +2311,17 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_CTR_EL0), access_ctr }, { SYS_DESC(SYS_SVCR), undef_access }, - { PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, - .reset = reset_pmcr, .reg = PMCR_EL0 }, + { PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr, + .reg = PMCR_EL0, .get_user = get_pmcr, .set_user = set_pmcr }, { PMU_SYS_REG(PMCNTENSET_EL0), - .access = access_pmcnten, .reg = PMCNTENSET_EL0 }, + .access = access_pmcnten, .reg = PMCNTENSET_EL0, + .get_user = get_pmreg, .set_user = set_pmreg }, { PMU_SYS_REG(PMCNTENCLR_EL0), - .access = access_pmcnten, .reg = PMCNTENSET_EL0 }, + .access = access_pmcnten, .reg = PMCNTENSET_EL0, + .get_user = get_pmreg, .set_user = set_pmreg }, { PMU_SYS_REG(PMOVSCLR_EL0), - .access = access_pmovs, .reg = PMOVSSET_EL0 }, + .access = access_pmovs, .reg = PMOVSSET_EL0, + .get_user = get_pmreg, .set_user = set_pmreg }, /* * PM_SWINC_EL0 is exposed to userspace as RAZ/WI, as it was * previously (and pointlessly) advertised in the past... @@ -2201,7 +2349,8 @@ static const struct sys_reg_desc sys_reg_descs[] = { { PMU_SYS_REG(PMUSERENR_EL0), .access = access_pmuserenr, .reset = reset_val, .reg = PMUSERENR_EL0, .val = 0 }, { PMU_SYS_REG(PMOVSSET_EL0), - .access = access_pmovs, .reg = PMOVSSET_EL0 }, + .access = access_pmovs, .reg = PMOVSSET_EL0, + .get_user = get_pmreg, .set_user = set_pmreg }, { SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 }, { SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 }, @@ -2380,18 +2529,28 @@ static const struct sys_reg_desc sys_reg_descs[] = { EL2_REG(VTTBR_EL2, access_rw, reset_val, 0), EL2_REG(VTCR_EL2, access_rw, reset_val, 0), - { SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 }, + { SYS_DESC(SYS_DACR32_EL2), trap_undef, reset_unknown, DACR32_EL2 }, EL2_REG(HDFGRTR_EL2, access_rw, reset_val, 0), EL2_REG(HDFGWTR_EL2, access_rw, reset_val, 0), EL2_REG(SPSR_EL2, access_rw, reset_val, 0), EL2_REG(ELR_EL2, access_rw, reset_val, 0), { SYS_DESC(SYS_SP_EL1), access_sp_el1}, - { SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 }, + /* AArch32 SPSR_* are RES0 if trapped from a NV guest */ + { SYS_DESC(SYS_SPSR_irq), .access = trap_raz_wi, + .visibility = hidden_user_visibility }, + { SYS_DESC(SYS_SPSR_abt), .access = trap_raz_wi, + .visibility = hidden_user_visibility }, + { SYS_DESC(SYS_SPSR_und), .access = trap_raz_wi, + .visibility = hidden_user_visibility }, + { SYS_DESC(SYS_SPSR_fiq), .access = trap_raz_wi, + .visibility = hidden_user_visibility }, + + { SYS_DESC(SYS_IFSR32_EL2), trap_undef, reset_unknown, IFSR32_EL2 }, EL2_REG(AFSR0_EL2, access_rw, reset_val, 0), EL2_REG(AFSR1_EL2, access_rw, reset_val, 0), EL2_REG(ESR_EL2, access_rw, reset_val, 0), - { SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x700 }, + { SYS_DESC(SYS_FPEXC32_EL2), trap_undef, reset_val, FPEXC32_EL2, 0x700 }, EL2_REG(FAR_EL2, access_rw, reset_val, 0), EL2_REG(HPFAR_EL2, access_rw, reset_val, 0), @@ -2438,14 +2597,15 @@ static bool trap_dbgdidr(struct kvm_vcpu *vcpu, if (p->is_write) { return ignore_write(vcpu, p); } else { - u64 dfr = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1); - u64 pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); - u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL1_EL3_SHIFT); - - p->regval = ((((dfr >> ID_AA64DFR0_EL1_WRPs_SHIFT) & 0xf) << 28) | - (((dfr >> ID_AA64DFR0_EL1_BRPs_SHIFT) & 0xf) << 24) | - (((dfr >> ID_AA64DFR0_EL1_CTX_CMPs_SHIFT) & 0xf) << 20) - | (6 << 16) | (1 << 15) | (el3 << 14) | (el3 << 12)); + u64 dfr = IDREG(vcpu->kvm, SYS_ID_AA64DFR0_EL1); + u64 pfr = IDREG(vcpu->kvm, SYS_ID_AA64PFR0_EL1); + u32 el3 = !!SYS_FIELD_GET(ID_AA64PFR0_EL1, EL3, pfr); + + p->regval = ((SYS_FIELD_GET(ID_AA64DFR0_EL1, WRPs, dfr) << 28) | + (SYS_FIELD_GET(ID_AA64DFR0_EL1, BRPs, dfr) << 24) | + (SYS_FIELD_GET(ID_AA64DFR0_EL1, CTX_CMPs, dfr) << 20) | + (SYS_FIELD_GET(ID_AA64DFR0_EL1, DebugVer, dfr) << 16) | + (1 << 15) | (el3 << 14) | (el3 << 12)); return true; } } @@ -3572,6 +3732,65 @@ int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) return write_demux_regids(uindices); } +#define KVM_ARM_FEATURE_ID_RANGE_INDEX(r) \ + KVM_ARM_FEATURE_ID_RANGE_IDX(sys_reg_Op0(r), \ + sys_reg_Op1(r), \ + sys_reg_CRn(r), \ + sys_reg_CRm(r), \ + sys_reg_Op2(r)) + +static bool is_feature_id_reg(u32 encoding) +{ + return (sys_reg_Op0(encoding) == 3 && + (sys_reg_Op1(encoding) < 2 || sys_reg_Op1(encoding) == 3) && + sys_reg_CRn(encoding) == 0 && + sys_reg_CRm(encoding) <= 7); +} + +int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm, struct reg_mask_range *range) +{ + const void *zero_page = page_to_virt(ZERO_PAGE(0)); + u64 __user *masks = (u64 __user *)range->addr; + + /* Only feature id range is supported, reserved[13] must be zero. */ + if (range->range || + memcmp(range->reserved, zero_page, sizeof(range->reserved))) + return -EINVAL; + + /* Wipe the whole thing first */ + if (clear_user(masks, KVM_ARM_FEATURE_ID_RANGE_SIZE * sizeof(__u64))) + return -EFAULT; + + for (int i = 0; i < ARRAY_SIZE(sys_reg_descs); i++) { + const struct sys_reg_desc *reg = &sys_reg_descs[i]; + u32 encoding = reg_to_encoding(reg); + u64 val; + + if (!is_feature_id_reg(encoding) || !reg->set_user) + continue; + + /* + * For ID registers, we return the writable mask. Other feature + * registers return a full 64bit mask. That's not necessary + * compliant with a given revision of the architecture, but the + * RES0/RES1 definitions allow us to do that. + */ + if (is_id_reg(encoding)) { + if (!reg->val || + (is_aa32_id_reg(encoding) && !kvm_supports_32bit_el0())) + continue; + val = reg->val; + } else { + val = ~0UL; + } + + if (put_user(val, (masks + KVM_ARM_FEATURE_ID_RANGE_INDEX(encoding)))) + return -EFAULT; + } + + return 0; +} + int __init kvm_sys_reg_table_init(void) { struct sys_reg_params params; diff --git a/arch/arm64/kvm/trace_arm.h b/arch/arm64/kvm/trace_arm.h index 8ad5310493..c18c1a9583 100644 --- a/arch/arm64/kvm/trace_arm.h +++ b/arch/arm64/kvm/trace_arm.h @@ -136,6 +136,31 @@ TRACE_EVENT(kvm_mmio_emulate, __entry->vcpu_pc, __entry->instr, __entry->cpsr) ); +TRACE_EVENT(kvm_mmio_nisv, + TP_PROTO(unsigned long vcpu_pc, unsigned long esr, + unsigned long far, unsigned long ipa), + TP_ARGS(vcpu_pc, esr, far, ipa), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + __field( unsigned long, esr ) + __field( unsigned long, far ) + __field( unsigned long, ipa ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + __entry->esr = esr; + __entry->far = far; + __entry->ipa = ipa; + ), + + TP_printk("ipa %#016lx, esr %#016lx, far %#016lx, pc %#016lx", + __entry->ipa, __entry->esr, + __entry->far, __entry->vcpu_pc) +); + + TRACE_EVENT(kvm_set_way_flush, TP_PROTO(unsigned long vcpu_pc, bool cache), TP_ARGS(vcpu_pc, cache), diff --git a/arch/arm64/kvm/vgic/vgic-debug.c b/arch/arm64/kvm/vgic/vgic-debug.c index 07aa043712..85606a531d 100644 --- a/arch/arm64/kvm/vgic/vgic-debug.c +++ b/arch/arm64/kvm/vgic/vgic-debug.c @@ -166,7 +166,7 @@ static void print_header(struct seq_file *s, struct vgic_irq *irq, if (vcpu) { hdr = "VCPU"; - id = vcpu->vcpu_id; + id = vcpu->vcpu_idx; } seq_printf(s, "\n"); @@ -212,7 +212,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq, " %2d " "\n", type, irq->intid, - (irq->target_vcpu) ? irq->target_vcpu->vcpu_id : -1, + (irq->target_vcpu) ? irq->target_vcpu->vcpu_idx : -1, pending, irq->line_level, irq->active, @@ -224,7 +224,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq, irq->mpidr, irq->source, irq->priority, - (irq->vcpu) ? irq->vcpu->vcpu_id : -1); + (irq->vcpu) ? irq->vcpu->vcpu_idx : -1); } static int vgic_debug_show(struct seq_file *s, void *v) diff --git a/arch/arm64/kvm/vgic/vgic-irqfd.c b/arch/arm64/kvm/vgic/vgic-irqfd.c index 475059bace..8c711deb25 100644 --- a/arch/arm64/kvm/vgic/vgic-irqfd.c +++ b/arch/arm64/kvm/vgic/vgic-irqfd.c @@ -23,7 +23,7 @@ static int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e, if (!vgic_valid_spi(kvm, spi_id)) return -EINVAL; - return kvm_vgic_inject_irq(kvm, 0, spi_id, level, NULL); + return kvm_vgic_inject_irq(kvm, NULL, spi_id, level, NULL); } /** diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index c420723548..28a93074ec 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -378,6 +378,12 @@ static int update_affinity(struct vgic_irq *irq, struct kvm_vcpu *vcpu) return ret; } +static struct kvm_vcpu *collection_to_vcpu(struct kvm *kvm, + struct its_collection *col) +{ + return kvm_get_vcpu_by_id(kvm, col->target_addr); +} + /* * Promotes the ITS view of affinity of an ITTE (which redistributor this LPI * is targeting) to the VGIC's view, which deals with target VCPUs. @@ -391,7 +397,7 @@ static void update_affinity_ite(struct kvm *kvm, struct its_ite *ite) if (!its_is_collection_mapped(ite->collection)) return; - vcpu = kvm_get_vcpu(kvm, ite->collection->target_addr); + vcpu = collection_to_vcpu(kvm, ite->collection); update_affinity(ite->irq, vcpu); } @@ -462,6 +468,9 @@ static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu) } irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]); + if (!irq) + continue; + raw_spin_lock_irqsave(&irq->irq_lock, flags); irq->pending_latch = pendmask & (1U << bit_nr); vgic_queue_irq_unlock(vcpu->kvm, irq, flags); @@ -683,7 +692,7 @@ int vgic_its_resolve_lpi(struct kvm *kvm, struct vgic_its *its, if (!ite || !its_is_collection_mapped(ite->collection)) return E_ITS_INT_UNMAPPED_INTERRUPT; - vcpu = kvm_get_vcpu(kvm, ite->collection->target_addr); + vcpu = collection_to_vcpu(kvm, ite->collection); if (!vcpu) return E_ITS_INT_UNMAPPED_INTERRUPT; @@ -892,7 +901,7 @@ static int vgic_its_cmd_handle_movi(struct kvm *kvm, struct vgic_its *its, return E_ITS_MOVI_UNMAPPED_COLLECTION; ite->collection = collection; - vcpu = kvm_get_vcpu(kvm, collection->target_addr); + vcpu = collection_to_vcpu(kvm, collection); vgic_its_invalidate_cache(kvm); @@ -1126,7 +1135,7 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, } if (its_is_collection_mapped(collection)) - vcpu = kvm_get_vcpu(kvm, collection->target_addr); + vcpu = collection_to_vcpu(kvm, collection); irq = vgic_add_lpi(kvm, lpi_nr, vcpu); if (IS_ERR(irq)) { @@ -1247,21 +1256,22 @@ static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its, u64 *its_cmd) { u16 coll_id; - u32 target_addr; struct its_collection *collection; bool valid; valid = its_cmd_get_validbit(its_cmd); coll_id = its_cmd_get_collection(its_cmd); - target_addr = its_cmd_get_target_addr(its_cmd); - - if (target_addr >= atomic_read(&kvm->online_vcpus)) - return E_ITS_MAPC_PROCNUM_OOR; if (!valid) { vgic_its_free_collection(its, coll_id); vgic_its_invalidate_cache(kvm); } else { + struct kvm_vcpu *vcpu; + + vcpu = kvm_get_vcpu_by_id(kvm, its_cmd_get_target_addr(its_cmd)); + if (!vcpu) + return E_ITS_MAPC_PROCNUM_OOR; + collection = find_collection(its, coll_id); if (!collection) { @@ -1275,9 +1285,9 @@ static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its, coll_id); if (ret) return ret; - collection->target_addr = target_addr; + collection->target_addr = vcpu->vcpu_id; } else { - collection->target_addr = target_addr; + collection->target_addr = vcpu->vcpu_id; update_affinity_collection(kvm, its, collection); } } @@ -1387,7 +1397,7 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its, if (!its_is_collection_mapped(collection)) return E_ITS_INVALL_UNMAPPED_COLLECTION; - vcpu = kvm_get_vcpu(kvm, collection->target_addr); + vcpu = collection_to_vcpu(kvm, collection); vgic_its_invall(vcpu); return 0; @@ -1404,29 +1414,29 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its, static int vgic_its_cmd_handle_movall(struct kvm *kvm, struct vgic_its *its, u64 *its_cmd) { - u32 target1_addr = its_cmd_get_target_addr(its_cmd); - u32 target2_addr = its_cmd_mask_field(its_cmd, 3, 16, 32); struct kvm_vcpu *vcpu1, *vcpu2; struct vgic_irq *irq; u32 *intids; int irq_count, i; - if (target1_addr >= atomic_read(&kvm->online_vcpus) || - target2_addr >= atomic_read(&kvm->online_vcpus)) + /* We advertise GITS_TYPER.PTA==0, making the address the vcpu ID */ + vcpu1 = kvm_get_vcpu_by_id(kvm, its_cmd_get_target_addr(its_cmd)); + vcpu2 = kvm_get_vcpu_by_id(kvm, its_cmd_mask_field(its_cmd, 3, 16, 32)); + + if (!vcpu1 || !vcpu2) return E_ITS_MOVALL_PROCNUM_OOR; - if (target1_addr == target2_addr) + if (vcpu1 == vcpu2) return 0; - vcpu1 = kvm_get_vcpu(kvm, target1_addr); - vcpu2 = kvm_get_vcpu(kvm, target2_addr); - irq_count = vgic_copy_lpi_list(kvm, vcpu1, &intids); if (irq_count < 0) return irq_count; for (i = 0; i < irq_count; i++) { irq = vgic_get_irq(kvm, NULL, intids[i]); + if (!irq) + continue; update_affinity(irq, vcpu2); @@ -2263,7 +2273,7 @@ static int vgic_its_restore_ite(struct vgic_its *its, u32 event_id, return PTR_ERR(ite); if (its_is_collection_mapped(collection)) - vcpu = kvm_get_vcpu(kvm, collection->target_addr); + vcpu = kvm_get_vcpu_by_id(kvm, collection->target_addr); irq = vgic_add_lpi(kvm, lpi_id, vcpu); if (IS_ERR(irq)) { @@ -2578,7 +2588,7 @@ static int vgic_its_restore_cte(struct vgic_its *its, gpa_t gpa, int esz) coll_id = val & KVM_ITS_CTE_ICID_MASK; if (target_addr != COLLECTION_NOT_MAPPED && - target_addr >= atomic_read(&kvm->online_vcpus)) + !kvm_get_vcpu_by_id(kvm, target_addr)) return -EINVAL; collection = find_collection(its, coll_id); diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c index 212b73a715..f48b8dab8b 100644 --- a/arch/arm64/kvm/vgic/vgic-kvm-device.c +++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c @@ -27,7 +27,8 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, if (addr + size < addr) return -EINVAL; - if (addr & ~kvm_phys_mask(kvm) || addr + size > kvm_phys_size(kvm)) + if (addr & ~kvm_phys_mask(&kvm->arch.mmu) || + (addr + size) > kvm_phys_size(&kvm->arch.mmu)) return -E2BIG; return 0; @@ -339,13 +340,9 @@ int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr, { int cpuid; - cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >> - KVM_DEV_ARM_VGIC_CPUID_SHIFT; + cpuid = FIELD_GET(KVM_DEV_ARM_VGIC_CPUID_MASK, attr->attr); - if (cpuid >= atomic_read(&dev->kvm->online_vcpus)) - return -EINVAL; - - reg_attr->vcpu = kvm_get_vcpu(dev->kvm, cpuid); + reg_attr->vcpu = kvm_get_vcpu_by_id(dev->kvm, cpuid); reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK; return 0; diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index ae5a3a7176..2533f264b9 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -840,6 +840,8 @@ static int vgic_register_all_redist_iodevs(struct kvm *kvm) unsigned long c; int ret = 0; + lockdep_assert_held(&kvm->slots_lock); + kvm_for_each_vcpu(c, vcpu, kvm) { ret = vgic_register_redist_iodev(vcpu); if (ret) @@ -1020,35 +1022,6 @@ int vgic_v3_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr) return 0; } -/* - * Compare a given affinity (level 1-3 and a level 0 mask, from the SGI - * generation register ICC_SGI1R_EL1) with a given VCPU. - * If the VCPU's MPIDR matches, return the level0 affinity, otherwise - * return -1. - */ -static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu) -{ - unsigned long affinity; - int level0; - - /* - * Split the current VCPU's MPIDR into affinity level 0 and the - * rest as this is what we have to compare against. - */ - affinity = kvm_vcpu_get_mpidr_aff(vcpu); - level0 = MPIDR_AFFINITY_LEVEL(affinity, 0); - affinity &= ~MPIDR_LEVEL_MASK; - - /* bail out if the upper three levels don't match */ - if (sgi_aff != affinity) - return -1; - - /* Is this VCPU's bit set in the mask ? */ - if (!(sgi_cpu_mask & BIT(level0))) - return -1; - - return level0; -} /* * The ICC_SGI* registers encode the affinity differently from the MPIDR, @@ -1059,6 +1032,38 @@ static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu) ((((reg) & ICC_SGI1R_AFFINITY_## level ##_MASK) \ >> ICC_SGI1R_AFFINITY_## level ##_SHIFT) << MPIDR_LEVEL_SHIFT(level)) +static void vgic_v3_queue_sgi(struct kvm_vcpu *vcpu, u32 sgi, bool allow_group1) +{ + struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, sgi); + unsigned long flags; + + raw_spin_lock_irqsave(&irq->irq_lock, flags); + + /* + * An access targeting Group0 SGIs can only generate + * those, while an access targeting Group1 SGIs can + * generate interrupts of either group. + */ + if (!irq->group || allow_group1) { + if (!irq->hw) { + irq->pending_latch = true; + vgic_queue_irq_unlock(vcpu->kvm, irq, flags); + } else { + /* HW SGI? Ask the GIC to inject it */ + int err; + err = irq_set_irqchip_state(irq->host_irq, + IRQCHIP_STATE_PENDING, + true); + WARN_RATELIMIT(err, "IRQ %d", irq->host_irq); + raw_spin_unlock_irqrestore(&irq->irq_lock, flags); + } + } else { + raw_spin_unlock_irqrestore(&irq->irq_lock, flags); + } + + vgic_put_irq(vcpu->kvm, irq); +} + /** * vgic_v3_dispatch_sgi - handle SGI requests from VCPUs * @vcpu: The VCPU requesting a SGI @@ -1069,83 +1074,46 @@ static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu) * This will trap in sys_regs.c and call this function. * This ICC_SGI1R_EL1 register contains the upper three affinity levels of the * target processors as well as a bitmask of 16 Aff0 CPUs. - * If the interrupt routing mode bit is not set, we iterate over all VCPUs to - * check for matching ones. If this bit is set, we signal all, but not the - * calling VCPU. + * + * If the interrupt routing mode bit is not set, we iterate over the Aff0 + * bits and signal the VCPUs matching the provided Aff{3,2,1}. + * + * If this bit is set, we signal all, but not the calling VCPU. */ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1) { struct kvm *kvm = vcpu->kvm; struct kvm_vcpu *c_vcpu; - u16 target_cpus; + unsigned long target_cpus; u64 mpidr; - int sgi; - int vcpu_id = vcpu->vcpu_id; - bool broadcast; - unsigned long c, flags; - - sgi = (reg & ICC_SGI1R_SGI_ID_MASK) >> ICC_SGI1R_SGI_ID_SHIFT; - broadcast = reg & BIT_ULL(ICC_SGI1R_IRQ_ROUTING_MODE_BIT); - target_cpus = (reg & ICC_SGI1R_TARGET_LIST_MASK) >> ICC_SGI1R_TARGET_LIST_SHIFT; - mpidr = SGI_AFFINITY_LEVEL(reg, 3); - mpidr |= SGI_AFFINITY_LEVEL(reg, 2); - mpidr |= SGI_AFFINITY_LEVEL(reg, 1); - - /* - * We iterate over all VCPUs to find the MPIDRs matching the request. - * If we have handled one CPU, we clear its bit to detect early - * if we are already finished. This avoids iterating through all - * VCPUs when most of the times we just signal a single VCPU. - */ - kvm_for_each_vcpu(c, c_vcpu, kvm) { - struct vgic_irq *irq; - - /* Exit early if we have dealt with all requested CPUs */ - if (!broadcast && target_cpus == 0) - break; - - /* Don't signal the calling VCPU */ - if (broadcast && c == vcpu_id) - continue; + u32 sgi, aff0; + unsigned long c; - if (!broadcast) { - int level0; + sgi = FIELD_GET(ICC_SGI1R_SGI_ID_MASK, reg); - level0 = match_mpidr(mpidr, target_cpus, c_vcpu); - if (level0 == -1) + /* Broadcast */ + if (unlikely(reg & BIT_ULL(ICC_SGI1R_IRQ_ROUTING_MODE_BIT))) { + kvm_for_each_vcpu(c, c_vcpu, kvm) { + /* Don't signal the calling VCPU */ + if (c_vcpu == vcpu) continue; - /* remove this matching VCPU from the mask */ - target_cpus &= ~BIT(level0); + vgic_v3_queue_sgi(c_vcpu, sgi, allow_group1); } - irq = vgic_get_irq(vcpu->kvm, c_vcpu, sgi); - - raw_spin_lock_irqsave(&irq->irq_lock, flags); + return; + } - /* - * An access targeting Group0 SGIs can only generate - * those, while an access targeting Group1 SGIs can - * generate interrupts of either group. - */ - if (!irq->group || allow_group1) { - if (!irq->hw) { - irq->pending_latch = true; - vgic_queue_irq_unlock(vcpu->kvm, irq, flags); - } else { - /* HW SGI? Ask the GIC to inject it */ - int err; - err = irq_set_irqchip_state(irq->host_irq, - IRQCHIP_STATE_PENDING, - true); - WARN_RATELIMIT(err, "IRQ %d", irq->host_irq); - raw_spin_unlock_irqrestore(&irq->irq_lock, flags); - } - } else { - raw_spin_unlock_irqrestore(&irq->irq_lock, flags); - } + /* We iterate over affinities to find the corresponding vcpus */ + mpidr = SGI_AFFINITY_LEVEL(reg, 3); + mpidr |= SGI_AFFINITY_LEVEL(reg, 2); + mpidr |= SGI_AFFINITY_LEVEL(reg, 1); + target_cpus = FIELD_GET(ICC_SGI1R_TARGET_LIST_MASK, reg); - vgic_put_irq(vcpu->kvm, irq); + for_each_set_bit(aff0, &target_cpus, hweight_long(ICC_SGI1R_TARGET_LIST_MASK)) { + c_vcpu = kvm_mpidr_to_vcpu(kvm, mpidr | aff0); + if (c_vcpu) + vgic_v3_queue_sgi(c_vcpu, sgi, allow_group1); } } diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 3dfc8b84e0..9465d3706a 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -684,7 +684,7 @@ int vgic_v3_probe(const struct gic_kvm_info *info) if (kvm_vgic_global_state.vcpu_base == 0) kvm_info("disabling GICv2 emulation\n"); - if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_30115)) { + if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_30115)) { group0_trap = true; group1_trap = true; } diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c index 339a55194b..74a67ad87f 100644 --- a/arch/arm64/kvm/vgic/vgic-v4.c +++ b/arch/arm64/kvm/vgic/vgic-v4.c @@ -436,6 +436,10 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq, if (ret) goto out; + /* Silently exit if the vLPI is already mapped */ + if (irq->hw) + goto out; + /* * Emit the mapping request. If it fails, the ITS probably * isn't v4 compatible, so let's silently bail out. Holding diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c index 8be4c1ebde..db2a95762b 100644 --- a/arch/arm64/kvm/vgic/vgic.c +++ b/arch/arm64/kvm/vgic/vgic.c @@ -422,7 +422,7 @@ retry: /** * kvm_vgic_inject_irq - Inject an IRQ from a device to the vgic * @kvm: The VM structure pointer - * @cpuid: The CPU for PPIs + * @vcpu: The CPU for PPIs or NULL for global interrupts * @intid: The INTID to inject a new state to. * @level: Edge-triggered: true: to trigger the interrupt * false: to ignore the call @@ -436,24 +436,22 @@ retry: * level-sensitive interrupts. You can think of the level parameter as 1 * being HIGH and 0 being LOW and all devices being active-HIGH. */ -int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid, - bool level, void *owner) +int kvm_vgic_inject_irq(struct kvm *kvm, struct kvm_vcpu *vcpu, + unsigned int intid, bool level, void *owner) { - struct kvm_vcpu *vcpu; struct vgic_irq *irq; unsigned long flags; int ret; - trace_vgic_update_irq_pending(cpuid, intid, level); - ret = vgic_lazy_init(kvm); if (ret) return ret; - vcpu = kvm_get_vcpu(kvm, cpuid); if (!vcpu && intid < VGIC_NR_PRIVATE_IRQS) return -EINVAL; + trace_vgic_update_irq_pending(vcpu ? vcpu->vcpu_idx : 0, intid, level); + irq = vgic_get_irq(kvm, vcpu, intid); if (!irq) return -EINVAL; diff --git a/arch/arm64/kvm/vmid.c b/arch/arm64/kvm/vmid.c index 7fe8ba1a28..806223b702 100644 --- a/arch/arm64/kvm/vmid.c +++ b/arch/arm64/kvm/vmid.c @@ -135,10 +135,11 @@ void kvm_arm_vmid_clear_active(void) atomic64_set(this_cpu_ptr(&active_vmids), VMID_ACTIVE_INVALID); } -void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid) +bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid) { unsigned long flags; u64 vmid, old_active_vmid; + bool updated = false; vmid = atomic64_read(&kvm_vmid->id); @@ -156,17 +157,21 @@ void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid) if (old_active_vmid != 0 && vmid_gen_match(vmid) && 0 != atomic64_cmpxchg_relaxed(this_cpu_ptr(&active_vmids), old_active_vmid, vmid)) - return; + return false; raw_spin_lock_irqsave(&cpu_vmid_lock, flags); /* Check that our VMID belongs to the current generation. */ vmid = atomic64_read(&kvm_vmid->id); - if (!vmid_gen_match(vmid)) + if (!vmid_gen_match(vmid)) { vmid = new_vmid(kvm_vmid); + updated = true; + } atomic64_set(this_cpu_ptr(&active_vmids), vmid); raw_spin_unlock_irqrestore(&cpu_vmid_lock, flags); + + return updated; } /* diff --git a/arch/arm64/lib/delay.c b/arch/arm64/lib/delay.c index 5b7890139b..cb2062e7e2 100644 --- a/arch/arm64/lib/delay.c +++ b/arch/arm64/lib/delay.c @@ -27,7 +27,7 @@ void __delay(unsigned long cycles) { cycles_t start = get_cycles(); - if (cpus_have_const_cap(ARM64_HAS_WFXT)) { + if (alternative_has_cap_unlikely(ARM64_HAS_WFXT)) { u64 end = start + cycles; /* diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 2e5d1e238a..55f6455a82 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -571,7 +571,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr, /* Write implies read */ vm_flags |= VM_WRITE; /* If EPAN is absent then exec implies read */ - if (!cpus_have_const_cap(ARM64_HAS_EPAN)) + if (!alternative_has_cap_unlikely(ARM64_HAS_EPAN)) vm_flags |= VM_EXEC; } @@ -607,6 +607,8 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr, goto done; } count_vm_vma_lock_event(VMA_LOCK_RETRY); + if (fault & VM_FAULT_MAJOR) + mm_flags |= FAULT_FLAG_TRIED; /* Quick path to respond to signals */ if (fault_signal_pending(fault, regs)) { diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 13fd592228..f5aae34263 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -544,8 +544,7 @@ bool __init arch_hugetlb_valid_size(unsigned long size) pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { - if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) && - cpus_have_const_cap(ARM64_WORKAROUND_2645198)) { + if (alternative_has_cap_unlikely(ARM64_WORKAROUND_2645198)) { /* * Break-before-make (BBM) is required for all user space mappings * when the permission changes from executable to non-executable diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 8a0f860434..74c1db8ce2 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -16,6 +16,7 @@ #include <linux/nodemask.h> #include <linux/initrd.h> #include <linux/gfp.h> +#include <linux/math.h> #include <linux/memblock.h> #include <linux/sort.h> #include <linux/of.h> @@ -64,15 +65,6 @@ EXPORT_SYMBOL(memstart_addr); */ phys_addr_t __ro_after_init arm64_dma_phys_limit; -/* Current arm64 boot protocol requires 2MB alignment */ -#define CRASH_ALIGN SZ_2M - -#define CRASH_ADDR_LOW_MAX arm64_dma_phys_limit -#define CRASH_ADDR_HIGH_MAX (PHYS_MASK + 1) -#define CRASH_HIGH_SEARCH_BASE SZ_4G - -#define DEFAULT_CRASH_KERNEL_LOW_SIZE (128UL << 20) - /* * To make optimal use of block mappings when laying out the linear * mapping, round down the base of physical memory to a size that can @@ -100,140 +92,25 @@ phys_addr_t __ro_after_init arm64_dma_phys_limit; #define ARM64_MEMSTART_ALIGN (1UL << ARM64_MEMSTART_SHIFT) #endif -static int __init reserve_crashkernel_low(unsigned long long low_size) +static void __init arch_reserve_crashkernel(void) { - unsigned long long low_base; - - low_base = memblock_phys_alloc_range(low_size, CRASH_ALIGN, 0, CRASH_ADDR_LOW_MAX); - if (!low_base) { - pr_err("cannot allocate crashkernel low memory (size:0x%llx).\n", low_size); - return -ENOMEM; - } - - pr_info("crashkernel low memory reserved: 0x%08llx - 0x%08llx (%lld MB)\n", - low_base, low_base + low_size, low_size >> 20); - - crashk_low_res.start = low_base; - crashk_low_res.end = low_base + low_size - 1; - insert_resource(&iomem_resource, &crashk_low_res); - - return 0; -} - -/* - * reserve_crashkernel() - reserves memory for crash kernel - * - * This function reserves memory area given in "crashkernel=" kernel command - * line parameter. The memory reserved is used by dump capture kernel when - * primary kernel is crashing. - */ -static void __init reserve_crashkernel(void) -{ - unsigned long long crash_low_size = 0, search_base = 0; - unsigned long long crash_max = CRASH_ADDR_LOW_MAX; + unsigned long long low_size = 0; unsigned long long crash_base, crash_size; char *cmdline = boot_command_line; - bool fixed_base = false; bool high = false; int ret; if (!IS_ENABLED(CONFIG_KEXEC_CORE)) return; - /* crashkernel=X[@offset] */ ret = parse_crashkernel(cmdline, memblock_phys_mem_size(), - &crash_size, &crash_base); - if (ret == -ENOENT) { - ret = parse_crashkernel_high(cmdline, 0, &crash_size, &crash_base); - if (ret || !crash_size) - return; - - /* - * crashkernel=Y,low can be specified or not, but invalid value - * is not allowed. - */ - ret = parse_crashkernel_low(cmdline, 0, &crash_low_size, &crash_base); - if (ret == -ENOENT) - crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE; - else if (ret) - return; - - search_base = CRASH_HIGH_SEARCH_BASE; - crash_max = CRASH_ADDR_HIGH_MAX; - high = true; - } else if (ret || !crash_size) { - /* The specified value is invalid */ - return; - } - - crash_size = PAGE_ALIGN(crash_size); - - /* User specifies base address explicitly. */ - if (crash_base) { - fixed_base = true; - search_base = crash_base; - crash_max = crash_base + crash_size; - } - -retry: - crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, - search_base, crash_max); - if (!crash_base) { - /* - * For crashkernel=size[KMG]@offset[KMG], print out failure - * message if can't reserve the specified region. - */ - if (fixed_base) { - pr_warn("crashkernel reservation failed - memory is in use.\n"); - return; - } - - /* - * For crashkernel=size[KMG], if the first attempt was for - * low memory, fall back to high memory, the minimum required - * low memory will be reserved later. - */ - if (!high && crash_max == CRASH_ADDR_LOW_MAX) { - crash_max = CRASH_ADDR_HIGH_MAX; - search_base = CRASH_ADDR_LOW_MAX; - crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE; - goto retry; - } - - /* - * For crashkernel=size[KMG],high, if the first attempt was - * for high memory, fall back to low memory. - */ - if (high && crash_max == CRASH_ADDR_HIGH_MAX) { - crash_max = CRASH_ADDR_LOW_MAX; - search_base = 0; - goto retry; - } - pr_warn("cannot allocate crashkernel (size:0x%llx)\n", - crash_size); + &crash_size, &crash_base, + &low_size, &high); + if (ret) return; - } - - if ((crash_base >= CRASH_ADDR_LOW_MAX) && crash_low_size && - reserve_crashkernel_low(crash_low_size)) { - memblock_phys_free(crash_base, crash_size); - return; - } - - pr_info("crashkernel reserved: 0x%016llx - 0x%016llx (%lld MB)\n", - crash_base, crash_base + crash_size, crash_size >> 20); - /* - * The crashkernel memory will be removed from the kernel linear - * map. Inform kmemleak so that it won't try to access it. - */ - kmemleak_ignore_phys(crash_base); - if (crashk_low_res.end) - kmemleak_ignore_phys(crashk_low_res.start); - - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; - insert_resource(&iomem_resource, &crashk_res); + reserve_crashkernel_generic(cmdline, crash_size, crash_base, + low_size, high); } /* @@ -479,7 +356,7 @@ void __init bootmem_init(void) * request_standard_resources() depends on crashkernel's memory being * reserved, so do it here. */ - reserve_crashkernel(); + arch_reserve_crashkernel(); memblock_dump_all(); } @@ -493,8 +370,16 @@ void __init mem_init(void) { bool swiotlb = max_pfn > PFN_DOWN(arm64_dma_phys_limit); - if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC)) + if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC) && !swiotlb) { + /* + * If no bouncing needed for ZONE_DMA, reduce the swiotlb + * buffer for kmalloc() bouncing to 1MB per 1GB of RAM. + */ + unsigned long size = + DIV_ROUND_UP(memblock_phys_mem_size(), 1024); + swiotlb_adjust_size(min(swiotlb_size_or_default(), size)); swiotlb = true; + } swiotlb_init(swiotlb, SWIOTLB_VERBOSE); diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c index f17d066e85..555285ebd5 100644 --- a/arch/arm64/mm/kasan_init.c +++ b/arch/arm64/mm/kasan_init.c @@ -300,7 +300,11 @@ void __init kasan_init(void) kasan_init_shadow(); kasan_init_depth(); #if defined(CONFIG_KASAN_GENERIC) - /* CONFIG_KASAN_SW_TAGS also requires kasan_init_sw_tags(). */ + /* + * Generic KASAN is now fully initialized. + * Software and Hardware Tag-Based modes still require + * kasan_init_sw_tags() and kasan_init_hw_tags() correspondingly. + */ pr_info("KernelAddressSanitizer initialized (generic)\n"); #endif } diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c index 8f5b7ce857..645fe60d00 100644 --- a/arch/arm64/mm/mmap.c +++ b/arch/arm64/mm/mmap.c @@ -68,7 +68,7 @@ static int __init adjust_protection_map(void) * With Enhanced PAN we can honour the execute-only permissions as * there is no PAN override with such mappings. */ - if (cpus_have_const_cap(ARM64_HAS_EPAN)) { + if (cpus_have_cap(ARM64_HAS_EPAN)) { protection_map[VM_EXEC] = PAGE_EXECONLY; protection_map[VM_EXEC | VM_SHARED] = PAGE_EXECONLY; } diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 47781bec61..15f6347d23 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -1469,8 +1469,7 @@ early_initcall(prevent_bootmem_remove_init); pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { - if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) && - cpus_have_const_cap(ARM64_WORKAROUND_2645198)) { + if (alternative_has_cap_unlikely(ARM64_WORKAROUND_2645198)) { /* * Break-before-make (BBM) is required for all user space mappings * when the permission changes from executable to non-executable diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 14fdf645ed..f66c37a161 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -405,8 +405,7 @@ SYM_FUNC_START(__cpu_setup) tlbi vmalle1 // Invalidate local TLB dsb nsh - mov x1, #3 << 20 - msr cpacr_el1, x1 // Enable FP/ASIMD + msr cpacr_el1, xzr // Reset cpacr_el1 mov x1, #1 << 12 // Reset mdscr_el1 and disable msr mdscr_el1, x1 // access to the DCC from EL0 isb // Unmask debug exceptions now, diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index 150d1c6543..7d4af64e39 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -288,7 +288,7 @@ static bool is_lsi_offset(int offset, int scale) static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf) { const struct bpf_prog *prog = ctx->prog; - const bool is_main_prog = prog->aux->func_idx == 0; + const bool is_main_prog = !bpf_is_subprog(prog); const u8 r6 = bpf2a64[BPF_REG_6]; const u8 r7 = bpf2a64[BPF_REG_7]; const u8 r8 = bpf2a64[BPF_REG_8]; diff --git a/arch/arm64/tools/Makefile b/arch/arm64/tools/Makefile index 07a93ab21a..fa2251d976 100644 --- a/arch/arm64/tools/Makefile +++ b/arch/arm64/tools/Makefile @@ -3,7 +3,7 @@ gen := arch/$(ARCH)/include/generated kapi := $(gen)/asm -kapi-hdrs-y := $(kapi)/cpucaps.h $(kapi)/sysreg-defs.h +kapi-hdrs-y := $(kapi)/cpucap-defs.h $(kapi)/sysreg-defs.h targets += $(addprefix ../../../, $(kapi-hdrs-y)) @@ -17,7 +17,7 @@ quiet_cmd_gen_cpucaps = GEN $@ quiet_cmd_gen_sysreg = GEN $@ cmd_gen_sysreg = mkdir -p $(dir $@); $(AWK) -f $(real-prereqs) > $@ -$(kapi)/cpucaps.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE +$(kapi)/cpucap-defs.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE $(call if_changed,gen_cpucaps) $(kapi)/sysreg-defs.h: $(src)/gen-sysreg.awk $(src)/sysreg FORCE diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps index 5511bee156..3781ad1d0b 100644 --- a/arch/arm64/tools/cpucaps +++ b/arch/arm64/tools/cpucaps @@ -27,6 +27,7 @@ HAS_ECV_CNTPOFF HAS_EPAN HAS_EVT HAS_FGT +HAS_FPSIMD HAS_GENERIC_AUTH HAS_GENERIC_AUTH_ARCH_QARMA3 HAS_GENERIC_AUTH_ARCH_QARMA5 @@ -39,7 +40,6 @@ HAS_LDAPR HAS_LSE_ATOMICS HAS_MOPS HAS_NESTED_VIRT -HAS_NO_FPSIMD HAS_NO_HW_PREFETCH HAS_PAN HAS_S1PIE diff --git a/arch/arm64/tools/gen-cpucaps.awk b/arch/arm64/tools/gen-cpucaps.awk index 8525980379..2f4f61a0af 100755 --- a/arch/arm64/tools/gen-cpucaps.awk +++ b/arch/arm64/tools/gen-cpucaps.awk @@ -15,8 +15,8 @@ function fatal(msg) { /^#/ { next } BEGIN { - print "#ifndef __ASM_CPUCAPS_H" - print "#define __ASM_CPUCAPS_H" + print "#ifndef __ASM_CPUCAP_DEFS_H" + print "#define __ASM_CPUCAP_DEFS_H" print "" print "/* Generated file - do not edit */" cap_num = 0 @@ -31,7 +31,7 @@ BEGIN { END { printf("#define ARM64_NCAPS\t\t\t\t\t%d\n", cap_num) print "" - print "#endif /* __ASM_CPUCAPS_H */" + print "#endif /* __ASM_CPUCAP_DEFS_H */" } # Any lines not handled by previous rules are unexpected diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg index 76ce150e73..96cbeeab4e 100644 --- a/arch/arm64/tools/sysreg +++ b/arch/arm64/tools/sysreg @@ -1026,7 +1026,11 @@ UnsignedEnum 35:32 SHA3 0b0000 NI 0b0001 IMP EndEnum -Res0 31:24 +Res0 31:28 +UnsignedEnum 27:24 B16B16 + 0b0000 NI + 0b0001 IMP +EndEnum UnsignedEnum 23:20 BF16 0b0000 NI 0b0001 IMP @@ -1235,6 +1239,7 @@ EndEnum UnsignedEnum 23:20 ATOMIC 0b0000 NI 0b0010 IMP + 0b0011 FEAT_LSE128 EndEnum UnsignedEnum 19:16 CRC32 0b0000 NI @@ -1305,6 +1310,7 @@ UnsignedEnum 23:20 LRCPC 0b0000 NI 0b0001 IMP 0b0010 LRCPC2 + 0b0011 LRCPC3 EndEnum UnsignedEnum 19:16 FCMA 0b0000 NI |