diff options
Diffstat (limited to 'arch/arm64')
541 files changed, 44781 insertions, 4101 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 77dfbc8ab2..6b96d75a3a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -36,6 +36,7 @@ config ARM64 select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE select ARCH_HAS_PTE_DEVMAP select ARCH_HAS_PTE_SPECIAL + select ARCH_HAS_HW_PTE_YOUNG select ARCH_HAS_SETUP_DMA_OPS select ARCH_HAS_SET_DIRECT_MAP select ARCH_HAS_SET_MEMORY @@ -132,6 +133,7 @@ config ARM64 select GENERIC_ARCH_TOPOLOGY select GENERIC_CLOCKEVENTS_BROADCAST select GENERIC_CPU_AUTOPROBE + select GENERIC_CPU_DEVICES select GENERIC_CPU_VULNERABILITIES select GENERIC_EARLY_IOREMAP select GENERIC_IDLE_POLL_SETUP @@ -154,7 +156,7 @@ config ARM64 select HAVE_MOVE_PUD select HAVE_PCI select HAVE_ACPI_APEI if (ACPI && EFI) - select HAVE_ALIGNED_STRUCT_PAGE if SLUB + select HAVE_ALIGNED_STRUCT_PAGE select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_BITREVERSE select HAVE_ARCH_COMPILER_H @@ -1537,15 +1539,15 @@ config XEN # include/linux/mmzone.h requires the following to be true: # -# MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS +# MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS # -# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT: +# so the maximum value of MAX_PAGE_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT: # -# | SECTION_SIZE_BITS | PAGE_SHIFT | max MAX_ORDER | default MAX_ORDER | -# ----+-------------------+--------------+-----------------+--------------------+ -# 4K | 27 | 12 | 15 | 10 | -# 16K | 27 | 14 | 13 | 11 | -# 64K | 29 | 16 | 13 | 13 | +# | SECTION_SIZE_BITS | PAGE_SHIFT | max MAX_PAGE_ORDER | default MAX_PAGE_ORDER | +# ----+-------------------+--------------+----------------------+-------------------------+ +# 4K | 27 | 12 | 15 | 10 | +# 16K | 27 | 14 | 13 | 11 | +# 64K | 29 | 16 | 13 | 13 | config ARCH_FORCE_MAX_ORDER int default "13" if ARM64_64K_PAGES @@ -1553,21 +1555,21 @@ config ARCH_FORCE_MAX_ORDER default "10" help The kernel page allocator limits the size of maximal physically - contiguous allocations. The limit is called MAX_ORDER and it + contiguous allocations. The limit is called MAX_PAGE_ORDER and it defines the maximal power of two of number of pages that can be allocated as a single contiguous block. This option allows overriding the default setting when ability to allocate very large blocks of physically contiguous memory is required. The maximal size of allocation cannot exceed the size of the - section, so the value of MAX_ORDER should satisfy + section, so the value of MAX_PAGE_ORDER should satisfy - MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS + MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS Don't change if unsure. config UNMAP_KERNEL_AT_EL0 - bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT + bool "Unmap kernel when running in userspace (KPTI)" if EXPERT default y help Speculation attacks against some high-performance processors can diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 9a2d3723cd..a88cdf9106 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -195,12 +195,12 @@ vdso_prepare: prepare0 include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so ifdef CONFIG_COMPAT_VDSO $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \ - include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so + arch/arm64/kernel/vdso32/vdso.so endif endif vdso-install-y += arch/arm64/kernel/vdso/vdso.so.dbg -vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so +vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso32.so.dbg include $(srctree)/scripts/Makefile.defconf diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile index 1761f59724..a5a7873711 100644 --- a/arch/arm64/boot/Makefile +++ b/arch/arm64/boot/Makefile @@ -44,7 +44,7 @@ EFI_ZBOOT_BFD_TARGET := elf64-littleaarch64 EFI_ZBOOT_MACH_TYPE := ARM64 EFI_ZBOOT_FORWARD_CFI := $(CONFIG_ARM64_BTI_KERNEL) -EFI_ZBOOT_OBJCOPY_FLAGS = --add-symbol zboot_code_size=0x$(shell \ +EFI_ZBOOT_OBJCOPY_FLAGS = --add-symbol zboot_code_size=0x$$( \ $(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1) include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 3aca6787a1..1f1f8d865d 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -42,4 +42,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts new file mode 100644 index 0000000000..21ca197705 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "OrangePi Zero 2W"; + compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* SY8089 DC/DC converter */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + regulator-always-on; + }; +}; + +&ehci1 { + status = "okay"; +}; + +/* USB 2 & 3 are on the FPC connector (or the exansion board) */ + +&mmc0 { + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_dldo1>; + vcc-pf-supply = <®_dldo1>; /* internally via VCC-IO */ + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; /* internally via VCC-IO */ + vcc-pi-supply = <®_dldo1>; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&pio>; + interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + /* Supplies VCC-PLL and DRAM */ + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Supplies VCC-IO, so needs to be always on. */ + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usbotg { + /* + * PHY0 pins are connected to a USB-C socket, but a role switch + * is not implemented: both CC pins are pulled to GND. + * The VBUS pins power the device, so a fixed peripheral mode + * is the best choice. + * The board can be powered via GPIOs, in this case port0 *can* + * act as a host (with a cable/adapter ignoring CC), as VBUS is + * then provided by the GPIOs. Any user of this setup would + * need to adjust the DT accordingly: dr_mode set to "host", + * enabling OHCI0 and EHCI0. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts new file mode 100644 index 0000000000..8ea1fd41ae --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Transpeed 8K618-T"; + compatible = "transpeed,8k618-t", "allwinner,sun50i-h618"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* discrete 3.3V regulator */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dldo1>; + cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8-pll"; + }; + + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-io-mmc"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pg-supply = <®_dldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; /* USB A type receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 439497ab96..072fe20cfc 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -59,6 +59,25 @@ }; }; + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; + + fpga-region { + compatible = "fpga-region"; + #address-cells = <0x2>; + #size-cells = <0x2>; + fpga-mgr = <&fpga_mgr>; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <0 170 4>, @@ -125,7 +144,7 @@ }; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -133,13 +152,6 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; - base_fpga_region { - #address-cells = <0x2>; - #size-cells = <0x2>; - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr>; - }; - clkmgr: clock-controller@ffd10000 { compatible = "intel,stratix10-clkmgr"; reg = <0xffd10000 0x1000>; @@ -510,6 +522,7 @@ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + clock-names = "otg"; iommus = <&smmu 7>; status = "disabled"; }; @@ -620,18 +633,6 @@ status = "disabled"; }; - - firmware { - svc { - compatible = "intel,stratix10-svc"; - method = "smc"; - memory-region = <&service_reserved>; - - fpga_mgr: fpga-mgr { - compatible = "intel,stratix10-soc-fpga-mgr"; - }; - }; - }; }; usbphy0: usbphy0 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 468fcc7da0..26173f0b00 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -51,7 +51,7 @@ regulator-max-microvolt = <330000>; }; - soc { + soc@0 { eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -66,14 +66,14 @@ }; &pinctrl0 { - i2c1_pmx_func: i2c1-pmx-func { + i2c1_pmx_func: i2c1-pmx-func-pins { pinctrl-single,pins = < 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ >; }; - i2c1_pmx_func_gpio: i2c1-pmx-func-gpio { + i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins { pinctrl-single,pins = < 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */ @@ -187,8 +187,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <1>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 532164a635..81d0e914a7 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -51,7 +51,7 @@ regulator-max-microvolt = <330000>; }; - soc { + soc@0 { eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -102,7 +102,7 @@ &nand { status = "okay"; - flash@0 { + nand@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -176,8 +176,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <1>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts index ff413f8e3b..0d837d3e65 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -80,8 +80,6 @@ &mmc { status = "okay"; - altr,dw-mshc-ciu-div = <0x3>; - altr,dw-mshc-sdr-timing = <0x0 0x3>; cap-sd-highspeed; cap-mmc-highspeed; broken-cd; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 998f505079..2ad1f8eef1 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -81,6 +81,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + watchdog@2100 { + compatible = "amlogic,c3-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,c3-periphs-pinctrl"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts index 0062667c4f..8a18ce9484 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -30,8 +30,20 @@ &uart_B { bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; }; }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts index c2d22b00c1..c356bd2cc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -25,3 +25,15 @@ &sd_emmc_b { broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index df16eead2c..c8905663bc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,7 +66,6 @@ VDDA-supply = <&vcc_3v3>; VDDP-supply = <&vcc_3v3>; VDDD-supply = <&vcc_3v3>; - status = "okay"; sound-name-prefix = "Linein"; }; @@ -75,14 +74,12 @@ compatible = "everest,es7154"; VDD-supply = <&vcc_3v3>; PVDD-supply = <&vcc_5v>; - status = "okay"; sound-name-prefix = "Lineout"; }; spdif_dit: audio-codec-2 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -91,14 +88,12 @@ compatible = "dmic-codec"; num-channels = <7>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; spdif_dir: audio-codec-4 { #sound-dai-cells = <0>; compatible = "linux,spdif-dir"; - status = "okay"; sound-name-prefix = "DIR"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index a49aa62e3f..7e5ac9db93 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -432,6 +432,27 @@ }; }; + nand_all_pins: nand-all-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + bias-pull-up; + }; + }; + emmc_ds_pins: emmc_ds { mux { groups = "emmc_ds"; @@ -1913,6 +1934,8 @@ reg = <0x0 0x7800 0x0 0x100>, <0x0 0x7000 0x0 0x800>; reg-names = "nfc", "emmc"; + pinctrl-0 = <&nand_all_pins>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 0ad0c2b7df..4c4550dd47 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -45,7 +45,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 4969a76460..9b55982b6a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi index 995ce10d5c..08c33ec7e9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -369,7 +369,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 0a6a128085..4b8db872bb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -487,7 +487,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 8fc2e143cb..0da386cabe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index ce548b3732..6396f190d7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 18f7b73028..e59c3c92b1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -26,7 +26,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index e238f1f101..f28452b9f0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -18,7 +18,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 292c718ee1..591455c50e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -18,7 +18,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index e8303089bf..74df325342 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -21,7 +21,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index e1b74b1749..376760d867 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 7d525bdb0e..ad2dd4ad0a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -28,7 +28,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 50d49aec41..d05dde8da5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -37,7 +37,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index b1b81ac032..983caddc40 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -23,6 +23,17 @@ reg = <0x0 0x0 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 52 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x3400000>; + no-map; + }; + }; }; &uart_b { @@ -34,3 +45,48 @@ pinctrl-0 = <&remote_pins>; pinctrl-names = "default"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +&spicc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spicc0_pins_x>; + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index dac18eb634..ce90b35686 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-s4-gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> +#include <dt-bindings/power/meson-s4-power.h> / { cpus { @@ -92,6 +96,44 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + watchdog@2100 { + compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; @@ -114,6 +156,187 @@ bias-disable; }; }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda", + "i2c0_scl"; + function = "i2c0"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_c", + "i2c1_scl_c"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_h", + "i2c1_scl_h"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda_d", + "i2c2_scl_d"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins2: i2c2-pins2 { + mux { + groups = "i2c2_sda_h8", + "i2c2_scl_h9"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins3: i2c2-pins3 { + mux { + groups = "i2c2_sda_h0", + "i2c2_scl_h1"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_z", + "i2c3_scl_z"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins1: i2c4-pins1 { + mux { + groups = "i2c4_sda_c", + "i2c4_scl_c"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins2: i2c4-pins2 { + mux { + groups = "i2c4_sda_d", + "i2c4_scl_d"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins3: i2c4-pins3 { + mux { + groups = "i2c4_sda_z", + "i2c4_scl_z"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + spicc0_pins_x: spicc0-pins_x { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_h: spicc0-pins-h { + mux { + groups = "spi_a_mosi_h", + "spi_a_miso_h", + "spi_a_clk_h"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_z: spicc0-pins-z { + mux { + groups = "spi_a_mosi_z", + "spi_a_miso_z", + "spi_a_clk_z"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + }; gpio_intc: interrupt-controller@4080 { @@ -126,12 +349,118 @@ <10 11 12 13 14 15 16 17 18 19 20 21>; }; + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_ETHPHY>, + <&xtal>, + <&clkc_pll CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SPICC0>, + <&clkc_periphs CLKID_SPICC0_EN>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x20>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x20>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x20>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@6e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6e000 0x0 0x20>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_E>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand: nand-controller@8c800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -154,5 +483,30 @@ reg = <0x0 0x440788 0x0 0x0c>; }; }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_S4_ETH_ID>; + clocks = <&clkc_periphs CLKID_ETH>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 095579c55f..109932068d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -32,7 +32,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8b4d280b1e..b897f5542c 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -747,7 +747,7 @@ }; thermal-zones { - pmic { + pmic-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 0>; @@ -760,7 +760,7 @@ }; }; - soc { + soc-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 3>; @@ -773,28 +773,28 @@ }; }; - big_cluster_thermal_zone: big-cluster { + big_cluster_thermal_zone: big-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 21>; status = "disabled"; }; - little_cluster_thermal_zone: little-cluster { + little_cluster_thermal_zone: little-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 22>; status = "disabled"; }; - gpu0_thermal_zone: gpu0 { + gpu0_thermal_zone: gpu0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 23>; status = "disabled"; }; - gpu1_thermal_zone: gpu1 { + gpu1_thermal_zone: gpu1-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 24>; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi index ec85cd2c73..31929e2377 100644 --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -76,27 +76,27 @@ }; thermal-zones { - pmic { + pmic-thermal { thermal-sensors = <&scmi_sensors0 0>; }; - soc { + soc-thermal { thermal-sensors = <&scmi_sensors0 3>; }; - big-cluster { + big-cluster-thermal { thermal-sensors = <&scmi_sensors0 21>; }; - little-cluster { + little-cluster-thermal { thermal-sensors = <&scmi_sensors0 22>; }; - gpu0 { + gpu0-thermal { thermal-sensors = <&scmi_sensors0 23>; }; - gpu1 { + gpu1-thermal { thermal-sensors = <&scmi_sensors0 24>; }; }; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 6e4ba69268..d7f2191c2c 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -1,8 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 +subdir-y += google + dtb-$(CONFIG_ARCH_EXYNOS) += \ exynos5433-tm2.dtb \ exynos5433-tm2e.dtb \ exynos7-espresso.dtb \ exynos7885-jackpotlte.dtb \ exynos850-e850-96.dtb \ - exynosautov9-sadk.dtb + exynosautov9-sadk.dtb \ + exynosautov920-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 91ae0462a7..7fbbec04bf 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -361,7 +361,8 @@ ranges = <0x0 0x0 0x0 0x18000000>; chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; + compatible = "samsung,exynos5433-chipid", + "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; }; @@ -850,7 +851,8 @@ reg = <0x10580000 0x1a20>, <0x11090000 0x100>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynos5433-wakeup-eint", + "samsung,exynos7-wakeup-eint"; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1546,7 +1548,7 @@ }; adc: adc@14d10000 { - compatible = "samsung,exynos7-adc"; + compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc"; reg = <0x14d10000 0x100>; interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; clock-names = "adc"; @@ -1556,7 +1558,7 @@ }; i2s1: i2s@14d60000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x14d60000 0x100>; dmas = <&pdma0 31>, <&pdma0 30>; dma-names = "tx", "rx"; @@ -1571,7 +1573,7 @@ }; pwm: pwm@14dd0000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm"; reg = <0x14dd0000 0x100>; interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, @@ -1586,7 +1588,8 @@ }; hsi2c_0: i2c@14e40000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e40000 0x1000>; interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1599,7 +1602,8 @@ }; hsi2c_1: i2c@14e50000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e50000 0x1000>; interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1612,7 +1616,8 @@ }; hsi2c_2: i2c@14e60000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e60000 0x1000>; interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1625,7 +1630,8 @@ }; hsi2c_3: i2c@14e70000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e70000 0x1000>; interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1638,7 +1644,8 @@ }; hsi2c_4: i2c@14ec0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ec0000 0x1000>; interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1651,7 +1658,8 @@ }; hsi2c_5: i2c@14ed0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ed0000 0x1000>; interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1664,7 +1672,8 @@ }; hsi2c_6: i2c@14ee0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ee0000 0x1000>; interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1677,7 +1686,8 @@ }; hsi2c_7: i2c@14ef0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ef0000 0x1000>; interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1690,7 +1700,8 @@ }; hsi2c_8: i2c@14d90000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14d90000 0x1000>; interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1703,7 +1714,8 @@ }; hsi2c_9: i2c@14da0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14da0000 0x1000>; interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1716,7 +1728,8 @@ }; hsi2c_10: i2c@14de0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14de0000 0x1000>; interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1729,7 +1742,8 @@ }; hsi2c_11: i2c@14df0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14df0000 0x1000>; interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1820,7 +1834,8 @@ }; mshc_0: mmc@15540000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos5433-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1833,7 +1848,8 @@ }; mshc_1: mmc@15550000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos5433-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1846,7 +1862,8 @@ }; mshc_2: mmc@15560000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos5433-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1897,7 +1914,8 @@ }; i2s0: i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", + "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 6ed80ddf33..9cb6bd6126 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -128,7 +128,8 @@ ranges = <0 0 0 0x18000000>; chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; + compatible = "samsung,exynos7-chipid", + "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; }; @@ -279,7 +280,7 @@ }; serial_0: serial@13630000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x13630000 0x100>; interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric0 PCLK_UART0>, @@ -289,7 +290,7 @@ }; serial_1: serial@14c20000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x14c20000 0x100>; interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART1>, @@ -299,7 +300,7 @@ }; serial_2: serial@14c30000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x14c30000 0x100>; interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART2>, @@ -309,7 +310,7 @@ }; serial_3: serial@14c40000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x14c40000 0x100>; interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART3>, @@ -539,7 +540,7 @@ }; rtc: rtc@10590000 { - compatible = "samsung,s3c6410-rtc"; + compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc"; reg = <0x10590000 0x100>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +560,8 @@ }; gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + compatible = "samsung,exynos7-mali", + "samsung,exynos5433-mali", "arm,mali-t760"; reg = <0x14ac0000 0x5000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, @@ -619,7 +621,7 @@ }; pwm: pwm@136c0000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm"; reg = <0x136c0000 0x100>; interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi index d69fc2392b..008228fb31 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi @@ -172,7 +172,8 @@ ranges = <0x0 0x0 0x0 0x20000000>; chipid@10000000 { - compatible = "samsung,exynos850-chipid"; + compatible = "samsung,exynos7885-chipid", + "samsung,exynos850-chipid"; reg = <0x10000000 0x24>; }; @@ -264,7 +265,8 @@ reg = <0x11cb0000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynos7885-wakeup-eint", + "samsung,exynos7-wakeup-eint"; interrupt-parent = <&gic>; interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; }; @@ -289,12 +291,14 @@ }; pmu_system_controller: system-controller@11c80000 { - compatible = "samsung,exynos7-pmu", "syscon"; + compatible = "samsung,exynos7885-pmu", + "samsung,exynos7-pmu", "syscon"; reg = <0x11c80000 0x10000>; }; mmc_0: mmc@13500000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos7885-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; reg = <0x13500000 0x2000>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -307,7 +311,8 @@ }; serial_0: serial@13800000 { - compatible = "samsung,exynos5433-uart"; + compatible = "samsung,exynos7885-uart", + "samsung,exynos5433-uart"; reg = <0x13800000 0x100>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -320,7 +325,8 @@ }; serial_1: serial@13810000 { - compatible = "samsung,exynos5433-uart"; + compatible = "samsung,exynos7885-uart", + "samsung,exynos5433-uart"; reg = <0x13810000 0x100>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -333,7 +339,8 @@ }; serial_2: serial@13820000 { - compatible = "samsung,exynos5433-uart"; + compatible = "samsung,exynos7885-uart", + "samsung,exynos5433-uart"; reg = <0x13820000 0x100>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -346,7 +353,8 @@ }; i2c_0: i2c@13830000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13830000 0x100>; interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -359,7 +367,8 @@ }; i2c_1: i2c@13840000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13840000 0x100>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -372,7 +381,8 @@ }; i2c_2: i2c@13850000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13850000 0x100>; interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -385,7 +395,8 @@ }; i2c_3: i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -398,7 +409,8 @@ }; i2c_4: i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -411,7 +423,8 @@ }; i2c_5: i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -424,7 +437,8 @@ }; i2c_6: i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -437,7 +451,8 @@ }; i2c_7: i2c@11cd0000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x11cd0000 0x100>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index 53104e65b9..da3f4a791e 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -359,7 +359,8 @@ reg = <0x11850000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos850-wakeup-eint"; + compatible = "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; }; }; @@ -368,7 +369,8 @@ reg = <0x11c30000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos850-wakeup-eint"; + compatible = "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; }; }; @@ -396,7 +398,7 @@ }; rtc: rtc@11a30000 { - compatible = "samsung,s3c6410-rtc"; + compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc"; reg = <0x11a30000 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; @@ -406,7 +408,8 @@ }; mmc_0: mmc@12100000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos850-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; reg = <0x12100000 0x2000>; interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -419,7 +422,7 @@ }; i2c_0: i2c@13830000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13830000 0x100>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -432,7 +435,7 @@ }; i2c_1: i2c@13840000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13840000 0x100>; interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -445,7 +448,7 @@ }; i2c_2: i2c@13850000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13850000 0x100>; interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -458,7 +461,7 @@ }; i2c_3: i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -471,7 +474,7 @@ }; i2c_4: i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -485,7 +488,7 @@ /* I2C_5 (also called CAM_PMIC_I2C in TRM) */ i2c_5: i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -499,7 +502,7 @@ /* I2C_6 (also called MOTOR_I2C in TRM) */ i2c_6: i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -640,7 +643,8 @@ status = "disabled"; hsi2c_0: i2c@138a0000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x138a0000 0xc0>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -668,7 +672,8 @@ status = "disabled"; hsi2c_1: i2c@138b0000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x138b0000 0xc0>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -696,7 +701,8 @@ status = "disabled"; hsi2c_2: i2c@138c0000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x138c0000 0xc0>; interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -738,7 +744,8 @@ status = "disabled"; hsi2c_3: i2c@11d00000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x11d00000 0xc0>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -778,7 +785,8 @@ status = "disabled"; hsi2c_4: i2c@11d20000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x11d20000 0xc0>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index bc1815f6ad..de2c1de51a 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "exynosautov9.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Samsung ExynosAuto v9 SADK board"; @@ -32,6 +33,31 @@ <0xa 0x00000000 0x2 0x00000000>; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_wakeup &key_volup &key_voldown>; + + key-wakeup { + label = "Wakeup"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpa0 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpg2 0 GPIO_ACTIVE_LOW>; + }; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpg1 5 GPIO_ACTIVE_LOW>; + }; + }; + ufs_0_fixed_vcc_reg: regulator-0 { compatible = "regulator-fixed"; regulator-name = "ufs-vcc"; @@ -49,6 +75,31 @@ }; }; +&pinctrl_alive { + key_wakeup: key-wakeup-pins { + samsung,pins = "gpa0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&pinctrl_peric1 { + key_voldown: key-voldown-pins { + samsung,pins = "gpg2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + key_volup: key-volup-pins { + samsung,pins = "gpg1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm_tout3>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index b228cd7e35..c871a2f49f 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -166,7 +166,8 @@ ranges = <0x0 0x0 0x0 0x20000000>; chipid@10000000 { - compatible = "samsung,exynos850-chipid"; + compatible = "samsung,exynosautov9-chipid", + "samsung,exynos850-chipid"; reg = <0x10000000 0x24>; }; @@ -309,7 +310,9 @@ reg = <0x10450000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynosautov9-wakeup-eint"; + compatible = "samsung,exynosautov9-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; }; }; @@ -349,7 +352,8 @@ }; pmu_system_controller: system-controller@10460000 { - compatible = "samsung,exynos7-pmu", "syscon"; + compatible = "samsung,exynosautov9-pmu", + "samsung,exynos7-pmu", "syscon"; reg = <0x10460000 0x10000>; reboot: syscon-reboot { diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi new file mode 100644 index 0000000000..663e8265cb --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi @@ -0,0 +1,1266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2023 Samsung Electronics Co., Ltd. + * + * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "exynos-pinctrl.h" + +&pinctrl_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_aud { + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb6: gpb6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi0 { + gph0: gph0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi1 { + gph8: gph8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi2 { + gph3: gph3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph4: gph4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph5: gph5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph6: gph6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi2ufs { + gph2: gph2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gph2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gph2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; + + ufs_refclk_out_1: ufs-refclk-out-1-pins { + samsung,pins = "gph2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; + + ufs_rst_n_1: ufs-rst-n-1-pins { + samsung,pins = "gph2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_peric0 { + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg4: gpg4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg5: gpg5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* PWM PERIC0 */ + pwm_tout0: pwm-tout0-pins { + samsung,pins = "gpg0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout1: pwm-tout1-pins { + samsung,pins = "gpg0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout2: pwm-tout2-pins { + samsung,pins = "gpg0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout3: pwm-tout3-pins { + samsung,pins = "gpg0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI00 */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart0_bus_dual: uart0-bus-dual-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI01 */ + uart1_bus: uart1-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart1_bus_dual: uart1-bus-dual-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI02 */ + uart2_bus: uart2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart2_bus_dual: uart2-bus-dual-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI03 */ + uart3_bus: uart3-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI04 */ + uart4_bus: uart4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI05 */ + uart5_bus: uart5-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI06 */ + uart6_bus: uart6-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart6_bus_dual: uart6-bus-dual-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI07 */ + uart7_bus: uart7-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart7_bus_dual: uart7-bus-dual-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI08 */ + uart8_bus: uart8-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart8_bus_dual: uart8-bus-dual-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI00 */ + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI00_I2C */ + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI01 */ + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI01_I2C */ + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp0-6", "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI02 */ + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI02_I2C */ + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI03 */ + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI03_I2C */ + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp1-6", "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI04 */ + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI04_I2C */ + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI05 */ + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI05_I2C */ + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI06 */ + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI06_I2C */ + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI07 */ + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI07_I2C */ + hsi2c15_bus: hsi2c15-bus-pins { + samsung,pins = "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI08 */ + hsi2c16_bus: hsi2c16-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI08_I2C */ + hsi2c17_bus: hsi2c17-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI00 */ + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI01 */ + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI02 */ + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI03 */ + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI04 */ + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI05 */ + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi5_cs: spi5-cs-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI06 */ + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI07 */ + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI08 */ + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I3C PERIC0 */ + i3c0_bus: i3c0-bus-pins { + samsung,pins = "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c1_bus: i3c1-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c2_bus: i3c2-bus-pins { + samsung,pins = "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c3_bus: i3c3-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_peric1 { + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp12: gpp12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* UART PERIC1 USI09 */ + uart9_bus: uart9-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart9_bus_dual: uart9-bus-dual-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI10 */ + uart10_bus: uart10-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart10_bus_dual: uart10-bus-dual-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI11 */ + uart11_bus: uart11-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart11_bus_dual: uart11-bus-dual-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1_USI12 */ + uart12_bus: uart12-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart12_bus_dual: uart12-bus-dual-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1_USI13 */ + uart13_bus: uart13-bus-pins { + samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart13_bus_dual: uart13-bus-dual-pins { + samsung,pins = "gpp7-4", "gpp7-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI14 */ + uart14_bus: uart14-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart14_bus_dual: uart14-bus-dual-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI15 */ + uart15_bus: uart15-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart15_bus_dual: uart15-bus-dual-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI16 */ + uart16_bus: uart16-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart16_bus_dual: uart16-bus-dual-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI17 */ + uart17_bus: uart17-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart17_bus_dual: uart17-bus-dual-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI09 */ + hsi2c18_bus: hsi2c18-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI09_I2C */ + hsi2c19_bus: hsi2c19-bus-pins { + samsung,pins = "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI10 */ + hsi2c20_bus: hsi2c20-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI10_I2C */ + hsi2c21_bus: hsi2c21-bus-pins { + samsung,pins = "gpp5-6", "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI11 */ + hsi2c22_bus: hsi2c22-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI11_I2C */ + hsi2c23_bus: hsi2c23-bus-pins { + samsung,pins = "gpp10-2", "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI12 */ + hsi2c24_bus: hsi2c24-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI12_I2C */ + hsi2c25_bus: hsi2c25-bus-pins { + samsung,pins = "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI13 */ + hsi2c26_bus: hsi2c26-bus-pins { + samsung,pins = "gpp7-4", "gpp7-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI13_I2C */ + hsi2c27_bus: hsi2c27-bus-pins { + samsung,pins = "gpp7-6", "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI14 */ + hsi2c28_bus: hsi2c28-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI14_I2C */ + hsi2c29_bus: hsi2c29-bus-pins { + samsung,pins = "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI15 */ + hsi2c30_bus: hsi2c30-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI15_I2C */ + hsi2c31_bus: hsi2c31-bus-pins { + samsung,pins = "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI16 */ + hsi2c32_bus: hsi2c32-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI16_I2C */ + hsi2c33_bus: hsi2c33-bus-pins { + samsung,pins = "gpp9-2", "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI17 */ + hsi2c34_bus: hsi2c34-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI17_I2C */ + hsi2c35_bus: hsi2c35-bus-pins { + samsung,pins = "gpp12-2", "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI09 */ + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI10 */ + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI11 */ + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI12 */ + spi12_bus: spi12-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI13 */ + spi13_bus: spi13-bus-pins { + samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI14 */ + spi14_bus: spi14-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI15 */ + spi15_bus: spi15-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi15_cs_func: spi15-cs-func-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI16 */ + spi16_bus: spi16-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi16_cs: spi16-cs-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi16_cs_func: spi16-cs-func-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI17 */ + spi17_bus: spi17-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi17_cs: spi17-cs-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi17_cs_func: spi17-cs-func-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I3C PERIC1 */ + i3c4_bus: i3c4-bus-pins { + samsung,pins = "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c5_bus: i3c5-bus-pins { + samsung,pins = "gpp7-6", "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c6_bus: i3c6-bus-pins { + samsung,pins = "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c7_bus: i3c7-bus-pins { + samsung,pins = "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts new file mode 100644 index 0000000000..a397f068ed --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov920 SADK board device tree source + * + * Copyright (c) 2023 Samsung Electronics Co., Ltd. + * + */ + +/dts-v1/; +#include "exynosautov920.dtsi" +#include "exynos-pinctrl.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Samsung ExynosAutov920 SADK board"; + compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920"; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial_0; + }; + + chosen { + stdout-path = &serial_0; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_wakeup &key_back>; + + key-wakeup { + label = "KEY_WAKEUP"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpa0 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + key-back { + label = "KEY_BACK"; + linux,code = <KEY_BACK>; + gpios = <&gpp6 3 GPIO_ACTIVE_LOW>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x70000000>, + <0x8 0x80000000 0x1 0xfba00000>, + <0xa 0x00000000 0x2 0x00000000>; + }; +}; + +&pinctrl_alive { + key_wakeup: key-wakeup-pins { + samsung,pins = "gpa0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + }; +}; + +&pinctrl_peric1 { + key_back: key-back-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_tout0>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&usi_0 { + samsung,clkreq-on; /* needed for UART mode */ + status = "okay"; +}; + +&xtcxo { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi new file mode 100644 index 0000000000..c1c8566d74 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov920 SoC device tree source + * + * Copyright (c) 2023 Samsung Electronics Co., Ltd. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,exynos-usi.h> + +/ { + compatible = "samsung,exynosautov920"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_hsi0; + pinctrl3 = &pinctrl_hsi1; + pinctrl4 = &pinctrl_hsi2; + pinctrl5 = &pinctrl_hsi2ufs; + pinctrl6 = &pinctrl_peric0; + pinctrl7 = &pinctrl_peric1; + }; + + arm-pmu { + compatible = "arm,cortex-a78-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + xtcxo: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + + /* + * FIXME: Keep the stub clock for serial driver, until proper clock + * driver is implemented. + */ + clock_usi: clock-usi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "usi"; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x300>; + enable-method = "psci"; + }; + + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10000>; + enable-method = "psci"; + }; + + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10100>; + enable-method = "psci"; + }; + + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10200>; + enable-method = "psci"; + }; + + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10300>; + enable-method = "psci"; + }; + + cpu8: cpu@20000 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x20000>; + enable-method = "psci"; + }; + + cpu9: cpu@20100 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x20100>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + chipid@10000000 { + compatible = "samsung,exynosautov920-chipid", + "samsung,exynos850-chipid"; + reg = <0x10000000 0x24>; + }; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x10400000 0x10000>, + <0x10460000 0x140000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscon_peric0: syscon@10820000 { + compatible = "samsung,exynosautov920-peric0-sysreg", + "syscon"; + reg = <0x10820000 0x2000>; + }; + + pinctrl_peric0: pinctrl@10830000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x10830000 0x10000>; + interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>; + }; + + usi_0: usi@108800c0 { + compatible = "samsung,exynosautov920-usi", + "samsung,exynos850-usi"; + reg = <0x108800c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1000>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&clock_usi>, <&clock_usi>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_0: serial@10880000 { + compatible = "samsung,exynosautov920-uart", + "samsung,exynos850-uart"; + reg = <0x10880000 0xc0>; + interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + clocks = <&clock_usi>, <&clock_usi>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + }; + + pwm: pwm@109b0000 { + compatible = "samsung,exynosautov920-pwm", + "samsung,exynos4210-pwm"; + reg = <0x109b0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&xtcxo>; + clock-names = "timers"; + status = "disabled"; + }; + + syscon_peric1: syscon@10c20000 { + compatible = "samsung,exynosautov920-peric1-sysreg", + "syscon"; + reg = <0x10c20000 0x2000>; + }; + + pinctrl_peric1: pinctrl@10c30000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x10c30000 0x10000>; + interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_alive: pinctrl@11850000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x11850000 0x10000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynosautov920-wakeup-eint"; + }; + }; + + pmu_system_controller: system-controller@11860000 { + compatible = "samsung,exynosautov920-pmu", + "samsung,exynos7-pmu","syscon"; + reg = <0x11860000 0x10000>; + }; + + pinctrl_hsi0: pinctrl@16040000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16040000 0x10000>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi1: pinctrl@16450000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16450000 0x10000>; + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi2: pinctrl@16c10000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16c10000 0x10000>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi2ufs: pinctrl@16d20000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16d20000 0x10000>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_aud: pinctrl@1a460000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x1a460000 0x10000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "exynosautov920-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile new file mode 100644 index 0000000000..0a6d5e1fe4 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +dtb-$(CONFIG_ARCH_EXYNOS) += \ + gs101-oriole.dtb \ diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts new file mode 100644 index 0000000000..4a71f75220 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Oriole Device Tree + * + * Copyright 2021-2023 Google LLC + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "gs101-pinctrl.h" +#include "gs101.dtsi" + +/ { + model = "Oriole"; + compatible = "google,gs101-oriole", "google,gs101"; + + aliases { + serial0 = &serial_0; + }; + + chosen { + /* Bootloader expects bootargs specified otherwise it crashes */ + bootargs = ""; + stdout-path = &serial_0; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>; + + button-vol-down { + label = "KEY_VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-vol-up { + label = "KEY_VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-power { + label = "KEY_POWER"; + linux,code = <KEY_POWER>; + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; +}; + +&ext_24_5m { + clock-frequency = <24576000>; +}; + +&ext_200m { + clock-frequency = <200000000>; +}; + +&pinctrl_far_alive { + key_voldown: key-voldown-pins { + samsung,pins = "gpa7-3"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + key_volup: key-volup-pins { + samsung,pins = "gpa8-1"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_gpio_alive { + key_power: key-power-pins { + samsung,pins = "gpa10-1"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&serial_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "okay"; +}; + +&usi_uart { + samsung,clkreq-on; /* needed for UART mode */ + status = "okay"; +}; + +&watchdog_cl0 { + timeout-sec = <30>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi new file mode 100644 index 0000000000..e6a9776d4d --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi @@ -0,0 +1,1249 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC pin-mux and pin-config device tree source + * + * Copyright 2019-2023 Google LLC + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> + */ + +#include "gs101-pinctrl.h" + +&pinctrl_gpio_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa5: gpa5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa9: gpa9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa10: gpa10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + uart15_bus: uart15-bus-pins { + samsung,pins = "gpa2-3", "gpa2-4"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + uart16_bus: uart16-bus-pins { + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + uart17_bus: uart17-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi15_bus: spi15-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpa4-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_far_alive { + gpa6: gpa6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa7: gpa7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa8: gpa8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa11: gpa11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; + }; +}; + +&pinctrl_gsacore { + gps0: gps0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gps1: gps1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gps2: gps2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_gsactrl { + gps3: gps3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi1 { + gph0: gph0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0_clkreq: pcie0-clkreq-pins{ + samsung,pins = "gph0-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>; + }; + + pcie0_perst: pcie0-perst-pins { + samsung,pins = "gph0-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + }; +}; + +&pinctrl_hsi2 { + gph2: gph2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph3: gph3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph4: gph4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gph4-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gph4-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gph3-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gph3-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + pcie1_clkreq: pcie1-clkreq-pins { + samsung,pins = "gph2-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>; + }; + + pcie1_perst: pcie1-perst-pins { + samsung,pins = "gph2-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + }; +}; + +&pinctrl_peric0 { + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp12: gpp12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp13: gpp13-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp14: gpp14-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp15: gpp15-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp16: gpp16-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp17: gpp17-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp18: gpp18-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp19: gpp19-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* USI_PERIC0_UART_DBG */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + disp_te_pri_on: disp-te-pri-on-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + }; + + disp_te_pri_off: disp-te-pri-off-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <GS101_PIN_FUNC_INPUT>; + }; + + disp_te_sec_on: disp-te-sec-on-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + }; + + disp_te_sec_off: disp-te-sec-off-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <GS101_PIN_FUNC_INPUT>; + }; + + sensor_mclk1_out: sensor-mclk1-out-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk1_fn: sensor-mclk1-fn-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk2_out: sensor-mclk2-out-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk2_fn: sensor-mclk2-fn-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk3_out: sensor-mclk3-out-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk3_fn: sensor-mclk3-fn-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk4_out: sensor-mclk4-out-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk4_fn: sensor-mclk4-fn-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk5_out: sensor-mclk5-out-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk5_fn: sensor-mclk5-fn-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk6_out: sensor-mclk6-out-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk6_fn: sensor-mclk6-fn-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk7_out: sensor-mclk7-out-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk7_fn: sensor-mclk7-fn-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk8_out: sensor-mclk8-out-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk8_fn: sensor-mclk8-fn-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart14_bus_single: uart14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", + "gpp18-2", "gpp18-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi14_bus: spi14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>; + }; + + uart8_bus_single: uart8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", + "gpp16-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart7_bus_single: uart7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", + "gpp14-2", "gpp14-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart6_bus_single: uart6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", + "gpp12-2", "gpp12-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart5_bus_single: uart5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", + "gpp10-2", "gpp10-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart4_bus_single: uart4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", + "gpp8-2", "gpp8-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart3_bus_single: uart3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", + "gpp6-2", "gpp6-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart2_bus_single: uart2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", + "gpp4-2", "gpp4-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart1_bus_single: uart1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", + "gpp2-2", "gpp2-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_peric1 { + gpp20: gpp20-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp21: gpp21-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp22: gpp22-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp23: gpp23-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp24: gpp24-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp25: gpp25-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp26: gpp26-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp27: gpp27-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart13_bus_single: uart13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", + "gpp25-2", "gpp25-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi13_bus: spi13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart12_bus_single: uart12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", + "gpp23-6", "gpp23-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi12_bus: spi12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs2: spi14-cs2-pins { + samsung,pins = "gpp23-6"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart11_bus_single: uart11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", + "gpp23-2", "gpp23-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart10_bus_single: uart10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", + "gpp21-2", "gpp21-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart9_bus_single: uart9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", + "gpp20-6", "gpp20-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart0_bus_single: uart0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", + "gpp20-2", "gpp20-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h new file mode 100644 index 0000000000..b7d276b1e2 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Pinctrl binding constants for GS101 + * + * Copyright 2020-2023 Google LLC + */ + +#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ +#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ + +#define GS101_PIN_PULL_NONE 0 +#define GS101_PIN_PULL_DOWN 1 +#define GS101_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define GS101_PIN_PDN_OUT0 0 +#define GS101_PIN_PDN_OUT1 1 +#define GS101_PIN_PDN_INPUT 2 +#define GS101_PIN_PDN_PREV 3 + +/* GS101 drive strengths */ +#define GS101_PIN_DRV_2_5_MA 0 +#define GS101_PIN_DRV_5_MA 1 +#define GS101_PIN_DRV_7_5_MA 2 +#define GS101_PIN_DRV_10_MA 3 + +#define GS101_PIN_FUNC_INPUT 0 +#define GS101_PIN_FUNC_OUTPUT 1 +#define GS101_PIN_FUNC_2 2 +#define GS101_PIN_FUNC_3 3 +#define GS101_PIN_FUNC_EINT 0xf + +#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */ diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi new file mode 100644 index 0000000000..d838e3a7af --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC + * + * Copyright 2019-2023 Google LLC + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> + */ + +#include <dt-bindings/clock/google,gs101.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,exynos-usi.h> + +/ { + compatible = "google,gs101"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_gpio_alive; + pinctrl1 = &pinctrl_far_alive; + pinctrl2 = &pinctrl_gsacore; + pinctrl3 = &pinctrl_gsactrl; + pinctrl4 = &pinctrl_peric0; + pinctrl5 = &pinctrl_peric1; + pinctrl6 = &pinctrl_hsi1; + pinctrl7 = &pinctrl_hsi2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu6>; + }; + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0000>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0100>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0200>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0300>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0400>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0500>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-x1"; + reg = <0x0600>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x1"; + reg = <0x0700>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + idle-states { + entry-method = "psci"; + + ANANKE_CPU_SLEEP: cpu-ananke-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <160>; + min-residency-us = <2000>; + }; + + ENYO_CPU_SLEEP: cpu-enyo-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <150>; + exit-latency-us = <190>; + min-residency-us = <2500>; + }; + + HERA_CPU_SLEEP: cpu-hera-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <235>; + exit-latency-us = <220>; + min-residency-us = <3500>; + }; + }; + }; + + /* TODO replace with CCF clock */ + dummy_clk: clock-3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12345>; + clock-output-names = "pclk"; + }; + + /* ect node is required to be present by bootloader */ + ect { + }; + + ext_24_5m: clock-1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + + ext_200m: clock-2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ext-200m"; + }; + + pmu-0 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-1 { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + pmu-2 { + compatible = "arm,cortex-x1-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>; + }; + + pmu-3 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + gsa_reserved_protected: gsa@90200000 { + reg = <0x0 0x90200000 0x400000>; + no-map; + }; + + tpu_fw_reserved: tpu-fw@93000000 { + reg = <0x0 0x93000000 0x1000000>; + no-map; + }; + + aoc_reserve: aoc@94000000 { + reg = <0x0 0x94000000 0x03000000>; + no-map; + }; + + abl_reserved: abl@f8800000 { + reg = <0x0 0xf8800000 0x02000000>; + no-map; + }; + + dss_log_reserved: dss-log-reserved@fd3f0000 { + reg = <0x0 0xfd3f0000 0x0000e000>; + no-map; + }; + + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 { + reg = <0x0 0xfd3fe000 0x00001000>; + no-map; + }; + + bldr_log_reserved: bldr-log-reserved@fd800000 { + reg = <0x0 0xfd800000 0x00100000>; + no-map; + }; + + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 { + reg = <0x0 0xfd900000 0x00002000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + cmu_misc: clock-controller@10010000 { + compatible = "google,gs101-cmu-misc"; + reg = <0x10010000 0x8000>; + #clock-cells = <1>; + clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>, + <&cmu_top CLK_DOUT_CMU_MISC_SSS>; + clock-names = "bus", "sss"; + }; + + watchdog_cl0: watchdog@10060000 { + compatible = "google,gs101-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>, + <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + status = "disabled"; + }; + + watchdog_cl1: watchdog@10070000 { + compatible = "google,gs101-wdt"; + reg = <0x10070000 0x100>; + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>, + <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + interrupt-controller; + reg = <0x10400000 0x10000>, /* GICD */ + <0x10440000 0x100000>;/* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5>; + }; + + ppi_cluster2: interrupt-partition-2 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + sysreg_peric0: syscon@10820000 { + compatible = "google,gs101-peric0-sysreg", "syscon"; + reg = <0x10820000 0x10000>; + }; + + pinctrl_peric0: pinctrl@10840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x10840000 0x00001000>; + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + usi_uart: usi@10a000c0 { + compatible = "google,gs101-usi", + "samsung,exynos850-usi"; + reg = <0x10a000c0 0x20>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&dummy_clk>, <&dummy_clk>; + clock-names = "pclk", "ipclk"; + samsung,sysreg = <&sysreg_peric0 0x1020>; + samsung,mode = <USI_V2_UART>; + status = "disabled"; + + serial_0: serial@10a00000 { + compatible = "google,gs101-uart"; + reg = <0x10a00000 0xc0>; + reg-io-width = <4>; + interrupts = <GIC_SPI 634 + IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&dummy_clk 0>, <&dummy_clk 0>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + }; + + sysreg_peric1: syscon@10c20000 { + compatible = "google,gs101-peric1-sysreg", "syscon"; + reg = <0x10c20000 0x10000>; + }; + + pinctrl_peric1: pinctrl@10c40000 { + compatible = "google,gs101-pinctrl"; + reg = <0x10c40000 0x00001000>; + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + pinctrl_hsi1: pinctrl@11840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x11840000 0x00001000>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + pinctrl_hsi2: pinctrl@14440000 { + compatible = "google,gs101-pinctrl"; + reg = <0x14440000 0x00001000>; + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + cmu_apm: clock-controller@17400000 { + compatible = "google,gs101-cmu-apm"; + reg = <0x17400000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + + sysreg_apm: syscon@174204e0 { + compatible = "google,gs101-apm-sysreg", "syscon"; + reg = <0x174204e0 0x1000>; + }; + + pmu_system_controller: system-controller@17460000 { + compatible = "google,gs101-pmu", "syscon"; + reg = <0x17460000 0x10000>; + }; + + pinctrl_gpio_alive: pinctrl@174d0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x174d0000 0x00001000>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_far_alive: pinctrl@174e0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x174e0000 0x00001000>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_gsactrl: pinctrl@17940000 { + compatible = "google,gs101-pinctrl"; + reg = <0x17940000 0x00001000>; + }; + + pinctrl_gsacore: pinctrl@17a80000 { + compatible = "google,gs101-pinctrl"; + reg = <0x17a80000 0x00001000>; + }; + + cmu_top: clock-controller@1e080000 { + compatible = "google,gs101-cmu-top"; + reg = <0x1e080000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>; + }; +}; + +#include "gs101-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 300049037e..2cb0212b63 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -20,23 +20,41 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb +DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb +DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb +DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb +DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb +DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb +DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb +DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb +DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb +DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb +DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb +DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb +DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb +DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb +DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb +DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo @@ -53,6 +71,33 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb +DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map +fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo + +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb @@ -84,9 +129,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo @@ -95,9 +142,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb @@ -115,6 +164,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb @@ -123,13 +175,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo +imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb @@ -164,6 +220,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index a863022529..1e3fe3897b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -307,46 +307,46 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>; - fsl,tmu-calibration = <0x00000000 0x00000025 - 0x00000001 0x0000002c - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004c - 0x00000007 0x00000053 - 0x00000008 0x00000059 - 0x00000009 0x0000005f - 0x0000000a 0x00000066 - 0x0000000b 0x0000006c - - 0x00010000 0x00000026 - 0x00010001 0x0000002d - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004d - 0x00010006 0x00000055 - 0x00010007 0x0000005d - 0x00010008 0x00000065 - 0x00010009 0x0000006d - - 0x00020000 0x00000026 - 0x00020001 0x00000030 - 0x00020002 0x0000003a - 0x00020003 0x00000044 - 0x00020004 0x0000004e - 0x00020005 0x00000059 - 0x00020006 0x00000063 - - 0x00030000 0x00000014 - 0x00030001 0x00000021 - 0x00030002 0x0000002e - 0x00030003 0x0000003a - 0x00030004 0x00000047 - 0x00030005 0x00000053 - 0x00030006 0x00000060>; - big-endian; + fsl,tmu-calibration = + <0x00000000 0x00000025>, + <0x00000001 0x0000002c>, + <0x00000002 0x00000032>, + <0x00000003 0x00000039>, + <0x00000004 0x0000003f>, + <0x00000005 0x00000046>, + <0x00000006 0x0000004c>, + <0x00000007 0x00000053>, + <0x00000008 0x00000059>, + <0x00000009 0x0000005f>, + <0x0000000a 0x00000066>, + <0x0000000b 0x0000006c>, + + <0x00010000 0x00000026>, + <0x00010001 0x0000002d>, + <0x00010002 0x00000035>, + <0x00010003 0x0000003d>, + <0x00010004 0x00000045>, + <0x00010005 0x0000004d>, + <0x00010006 0x00000055>, + <0x00010007 0x0000005d>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006d>, + + <0x00020000 0x00000026>, + <0x00020001 0x00000030>, + <0x00020002 0x0000003a>, + <0x00020003 0x00000044>, + <0x00020004 0x0000004e>, + <0x00020005 0x00000059>, + <0x00020006 0x00000063>, + + <0x00030000 0x00000014>, + <0x00030001 0x00000021>, + <0x00030002 0x0000002e>, + <0x00030003 0x0000003a>, + <0x00030004 0x00000047>, + <0x00030005 0x00000053>, + <0x00030006 0x00000060>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index eefe3577d9..ae534c23b9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1026,49 +1026,50 @@ reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; - fsl,tmu-calibration = <0x00000000 0x00000024 - 0x00000001 0x0000002b - 0x00000002 0x00000031 - 0x00000003 0x00000038 - 0x00000004 0x0000003f - 0x00000005 0x00000045 - 0x00000006 0x0000004c - 0x00000007 0x00000053 - 0x00000008 0x00000059 - 0x00000009 0x00000060 - 0x0000000a 0x00000066 - 0x0000000b 0x0000006d - - 0x00010000 0x0000001c - 0x00010001 0x00000024 - 0x00010002 0x0000002c - 0x00010003 0x00000035 - 0x00010004 0x0000003d - 0x00010005 0x00000045 - 0x00010006 0x0000004d - 0x00010007 0x00000055 - 0x00010008 0x0000005e - 0x00010009 0x00000066 - 0x0001000a 0x0000006e - - 0x00020000 0x00000018 - 0x00020001 0x00000022 - 0x00020002 0x0000002d - 0x00020003 0x00000038 - 0x00020004 0x00000043 - 0x00020005 0x0000004d - 0x00020006 0x00000058 - 0x00020007 0x00000063 - 0x00020008 0x0000006e - - 0x00030000 0x00000010 - 0x00030001 0x0000001c - 0x00030002 0x00000029 - 0x00030003 0x00000036 - 0x00030004 0x00000042 - 0x00030005 0x0000004f - 0x00030006 0x0000005b - 0x00030007 0x00000068>; + fsl,tmu-calibration = + <0x00000000 0x00000024>, + <0x00000001 0x0000002b>, + <0x00000002 0x00000031>, + <0x00000003 0x00000038>, + <0x00000004 0x0000003f>, + <0x00000005 0x00000045>, + <0x00000006 0x0000004c>, + <0x00000007 0x00000053>, + <0x00000008 0x00000059>, + <0x00000009 0x00000060>, + <0x0000000a 0x00000066>, + <0x0000000b 0x0000006d>, + + <0x00010000 0x0000001c>, + <0x00010001 0x00000024>, + <0x00010002 0x0000002c>, + <0x00010003 0x00000035>, + <0x00010004 0x0000003d>, + <0x00010005 0x00000045>, + <0x00010006 0x0000004d>, + <0x00010007 0x00000055>, + <0x00010008 0x0000005e>, + <0x00010009 0x00000066>, + <0x0001000a 0x0000006e>, + + <0x00020000 0x00000018>, + <0x00020001 0x00000022>, + <0x00020002 0x0000002d>, + <0x00020003 0x00000038>, + <0x00020004 0x00000043>, + <0x00020005 0x0000004d>, + <0x00020006 0x00000058>, + <0x00020007 0x00000063>, + <0x00020008 0x0000006e>, + + <0x00030000 0x00000010>, + <0x00030001 0x0000001c>, + <0x00030002 0x00000029>, + <0x00030003 0x00000036>, + <0x00030004 0x00000042>, + <0x00030005 0x0000004f>, + <0x00030006 0x0000005b>, + <0x00030007 0x00000068>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 229bb4bebe..d333b773bc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -447,46 +447,47 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; - fsl,tmu-calibration = <0x00000000 0x00000023 - 0x00000001 0x0000002a - 0x00000002 0x00000031 - 0x00000003 0x00000037 - 0x00000004 0x0000003e - 0x00000005 0x00000044 - 0x00000006 0x0000004b - 0x00000007 0x00000051 - 0x00000008 0x00000058 - 0x00000009 0x0000005e - 0x0000000a 0x00000065 - 0x0000000b 0x0000006b - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003b - 0x00010004 0x00000043 - 0x00010005 0x0000004b - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000064 - 0x00010009 0x0000006c - - 0x00020000 0x00000021 - 0x00020001 0x0000002c - 0x00020002 0x00000036 - 0x00020003 0x00000040 - 0x00020004 0x0000004b - 0x00020005 0x00000055 - 0x00020006 0x0000005f - - 0x00030000 0x00000013 - 0x00030001 0x0000001d - 0x00030002 0x00000028 - 0x00030003 0x00000032 - 0x00030004 0x0000003d - 0x00030005 0x00000047 - 0x00030006 0x00000052 - 0x00030007 0x0000005c>; + fsl,tmu-calibration = + <0x00000000 0x00000023>, + <0x00000001 0x0000002a>, + <0x00000002 0x00000031>, + <0x00000003 0x00000037>, + <0x00000004 0x0000003e>, + <0x00000005 0x00000044>, + <0x00000006 0x0000004b>, + <0x00000007 0x00000051>, + <0x00000008 0x00000058>, + <0x00000009 0x0000005e>, + <0x0000000a 0x00000065>, + <0x0000000b 0x0000006b>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003b>, + <0x00010004 0x00000043>, + <0x00010005 0x0000004b>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000064>, + <0x00010009 0x0000006c>, + + <0x00020000 0x00000021>, + <0x00020001 0x0000002c>, + <0x00020002 0x00000036>, + <0x00020003 0x00000040>, + <0x00020004 0x0000004b>, + <0x00020005 0x00000055>, + <0x00020006 0x0000005f>, + + <0x00030000 0x00000013>, + <0x00030001 0x0000001d>, + <0x00030002 0x00000028>, + <0x00030003 0x00000032>, + <0x00030004 0x0000003d>, + <0x00030005 0x00000047>, + <0x00030006 0x00000052>, + <0x00030007 0x0000005c>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 50f68ca5a9..1515cec231 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -445,46 +445,46 @@ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000023 - 0x00000001 0x00000029 - 0x00000002 0x0000002f - 0x00000003 0x00000036 - 0x00000004 0x0000003c - 0x00000005 0x00000042 - 0x00000006 0x00000049 - 0x00000007 0x0000004f - 0x00000008 0x00000055 - 0x00000009 0x0000005c - 0x0000000a 0x00000062 - 0x0000000b 0x00000068 + <0x00000000 0x00000023>, + <0x00000001 0x00000029>, + <0x00000002 0x0000002f>, + <0x00000003 0x00000036>, + <0x00000004 0x0000003c>, + <0x00000005 0x00000042>, + <0x00000006 0x00000049>, + <0x00000007 0x0000004f>, + <0x00000008 0x00000055>, + <0x00000009 0x0000005c>, + <0x0000000a 0x00000062>, + <0x0000000b 0x00000068>, /* Calibration data group 2 */ - 0x00010000 0x00000022 - 0x00010001 0x0000002a - 0x00010002 0x00000032 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000052 - 0x00010007 0x0000005a - 0x00010008 0x00000062 - 0x00010009 0x0000006a + <0x00010000 0x00000022>, + <0x00010001 0x0000002a>, + <0x00010002 0x00000032>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000052>, + <0x00010007 0x0000005a>, + <0x00010008 0x00000062>, + <0x00010009 0x0000006a>, /* Calibration data group 3 */ - 0x00020000 0x00000021 - 0x00020001 0x0000002b - 0x00020002 0x00000035 - 0x00020003 0x0000003e - 0x00020004 0x00000048 - 0x00020005 0x00000052 - 0x00020006 0x0000005c + <0x00020000 0x00000021>, + <0x00020001 0x0000002b>, + <0x00020002 0x00000035>, + <0x00020003 0x0000003e>, + <0x00020004 0x00000048>, + <0x00020005 0x00000052>, + <0x00020006 0x0000005c>, /* Calibration data group 4 */ - 0x00030000 0x00000011 - 0x00030001 0x0000001a - 0x00030002 0x00000024 - 0x00030003 0x0000002e - 0x00030004 0x00000038 - 0x00030005 0x00000042 - 0x00030006 0x0000004c - 0x00030007 0x00000056>; + <0x00030000 0x00000011>, + <0x00030001 0x0000001a>, + <0x00030002 0x00000024>, + <0x00030003 0x0000002e>, + <0x00030004 0x00000038>, + <0x00030005 0x00000042>, + <0x00030006 0x0000004c>, + <0x00030007 0x00000056>; big-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 8f6090a9ae..8616d5e0c3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -284,46 +284,46 @@ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000023 - 0x00000001 0x0000002a - 0x00000002 0x00000030 - 0x00000003 0x00000037 - 0x00000004 0x0000003d - 0x00000005 0x00000044 - 0x00000006 0x0000004a - 0x00000007 0x00000051 - 0x00000008 0x00000057 - 0x00000009 0x0000005e - 0x0000000a 0x00000064 - 0x0000000b 0x0000006b + <0x00000000 0x00000023>, + <0x00000001 0x0000002a>, + <0x00000002 0x00000030>, + <0x00000003 0x00000037>, + <0x00000004 0x0000003d>, + <0x00000005 0x00000044>, + <0x00000006 0x0000004a>, + <0x00000007 0x00000051>, + <0x00000008 0x00000057>, + <0x00000009 0x0000005e>, + <0x0000000a 0x00000064>, + <0x0000000b 0x0000006b>, /* Calibration data group 2 */ - 0x00010000 0x00000022 - 0x00010001 0x0000002a - 0x00010002 0x00000032 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000052 - 0x00010007 0x0000005a - 0x00010008 0x00000062 - 0x00010009 0x0000006a + <0x00010000 0x00000022>, + <0x00010001 0x0000002a>, + <0x00010002 0x00000032>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000052>, + <0x00010007 0x0000005a>, + <0x00010008 0x00000062>, + <0x00010009 0x0000006a>, /* Calibration data group 3 */ - 0x00020000 0x00000021 - 0x00020001 0x0000002b - 0x00020002 0x00000035 - 0x00020003 0x00000040 - 0x00020004 0x0000004a - 0x00020005 0x00000054 - 0x00020006 0x0000005e + <0x00020000 0x00000021>, + <0x00020001 0x0000002b>, + <0x00020002 0x00000035>, + <0x00020003 0x00000040>, + <0x00020004 0x0000004a>, + <0x00020005 0x00000054>, + <0x00020006 0x0000005e>, /* Calibration data group 4 */ - 0x00030000 0x00000010 - 0x00030001 0x0000001c - 0x00030002 0x00000027 - 0x00030003 0x00000032 - 0x00030004 0x0000003e - 0x00030005 0x00000049 - 0x00030006 0x00000054 - 0x00030007 0x00000060>; + <0x00030000 0x00000010>, + <0x00030001 0x0000001c>, + <0x00030002 0x00000027>, + <0x00030003 0x00000032>, + <0x00030004 0x0000003e>, + <0x00030005 0x00000049>, + <0x00030006 0x00000054>, + <0x00030007 0x00000060>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 717288bbdb..0b72928359 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -321,42 +321,43 @@ reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + fsl,tmu-calibration = + <0x00000000 0x00000026>, + <0x00000001 0x0000002d>, + <0x00000002 0x00000032>, + <0x00000003 0x00000039>, + <0x00000004 0x0000003f>, + <0x00000005 0x00000046>, + <0x00000006 0x0000004d>, + <0x00000007 0x00000054>, + <0x00000008 0x0000005a>, + <0x00000009 0x00000061>, + <0x0000000a 0x0000006a>, + <0x0000000b 0x00000071>, + + <0x00010000 0x00000025>, + <0x00010001 0x0000002c>, + <0x00010002 0x00000035>, + <0x00010003 0x0000003d>, + <0x00010004 0x00000045>, + <0x00010005 0x0000004e>, + <0x00010006 0x00000057>, + <0x00010007 0x00000061>, + <0x00010008 0x0000006b>, + <0x00010009 0x00000076>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000049>, + <0x00020004 0x00000056>, + <0x00020005 0x00000061>, + <0x00020006 0x0000006d>, + + <0x00030000 0x00000021>, + <0x00030001 0x0000002a>, + <0x00030002 0x0000003c>, + <0x00030003 0x0000004e>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts new file mode 100644 index 0000000000..da0f58e26b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +#include "fsl-lx2160a-tqmlx2160a.dtsi" + +/ { + model = "TQ Systems GmbH MBLX2160A Starterkit"; + compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a", + "fsl,lx2160a"; + + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart0; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + label = "button:user1"; + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F1>; + }; + + button-user2 { + label = "button:user2"; + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F2>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-user1 { + gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + linux,default-trigger = "heartbeat"; + }; + + led-user2 { + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + linux,default-trigger = "heartbeat"; + }; + }; + + sfp_xfi1: sfp-xfi1 { + compatible = "sff,sfp"; + i2c-bus = <&xfi1_i2c>; + mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + sfp_xfi2: sfp-xfi2 { + compatible = "sff,sfp"; + i2c-bus = <&xfi2_i2c>; + mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <&dp83867_2_3>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&dp83867_2_4>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + dp83867_1_1: ethernet-phy@1 { + reg = <1>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_2: ethernet-phy@2 { + reg = <2>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_3: ethernet-phy@3 { + reg = <3>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_4: ethernet-phy@4 { + reg = <4>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_5: ethernet-phy@5 { + reg = <5>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_6: ethernet-phy@6 { + reg = <6>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&emdio2 { + status = "okay"; + + dp83867_2_1: ethernet-phy@1 { + reg = <1>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_2_2: ethernet-phy@2 { + reg = <2>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_2_3: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_2_4: ethernet-phy@4 { + reg = <4>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + no-mmc; + no-sdio; + wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c0 { + gpioex3: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; +}; + +&i2c4 { + status = "okay"; + + mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <®_vcc3v3>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + gpioex0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; + + gpioex1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; + + gpioex2: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c5 { + status = "okay"; + + mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <®_vcc3v3>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + xfi1_i2c: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + xfi2_i2c: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&pcs_mdio17 { + status = "okay"; +}; + +&pcs_mdio18 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>; + vcc-supply = <®_vcc3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso new file mode 100644 index 0000000000..8284a564e2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac9 { + phy-handle = <&dp83867_2_1>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac10 { + phy-handle = <&dp83867_2_2>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso new file mode 100644 index 0000000000..636b17a383 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac1 { + managed = "in-band-status"; +}; + +&pcs_mdio1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso new file mode 100644 index 0000000000..6d0c808cd8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac12 { + phy-handle = <&dp83867_1_1>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac13 { + phy-handle = <&dp83867_1_5>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac14 { + phy-handle = <&dp83867_1_6>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac16 { + phy-handle = <&dp83867_1_4>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso new file mode 100644 index 0000000000..db88a86ff6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac12 { + phy-handle = <&dp83867_1_1>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac13 { + sfp = <&sfp_xfi1>; + managed = "in-band-status"; +}; + +&dpmac14 { + sfp = <&sfp_xfi2>; + managed = "in-band-status"; +}; + +&dpmac16 { + phy-handle = <&dp83867_1_4>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; + +&sfp_xfi1 { + status = "okay"; +}; + +&sfp_xfi2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso new file mode 100644 index 0000000000..f6dfa76aa0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac13 { + sfp = <&sfp_xfi1>; + managed = "in-band-status"; +}; + +&dpmac14 { + sfp = <&sfp_xfi2>; + managed = "in-band-status"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sfp_xfi1 { + status = "okay"; +}; + +&sfp_xfi2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi new file mode 100644 index 0000000000..89a4765737 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +#include "fsl-lx2160a.dtsi" + +/ { + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc1 { + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&fspi { + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <10000000>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + flash1: flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <10000000>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + }; +}; + +&i2c0 { + scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + status = "okay"; + + sensor0: temperature-sensor@1f { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1f>; + }; + + eeprom1: eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + read-only; + vcc-supply = <®_vcc3v3>; + }; + + rtc: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; + }; + + eeprom2: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <®_vcc3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index f176ca2e24..6640b49670 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -732,9 +732,9 @@ fsl,tmu-range = <0x800000e6 0x8001017d>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000035 + <0x00000000 0x00000035>, /* Calibration data group 2 */ - 0x00000001 0x00000154>; + <0x00000001 0x00000154>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi index 72136c436a..f6654fdcb1 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -68,6 +68,7 @@ gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-name = "can1_supply"; + startup-delay-us = <1000>; }; reg_can2_supply: regulator-can2-supply { @@ -77,6 +78,7 @@ gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-name = "can2_supply"; + startup-delay-us = <1000>; }; reg_usb_host_vbus: regulator-usb-host-vbus { diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index 9d75ce4675..f057c6b21b 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -24,7 +24,6 @@ audio_subsys: bus@59000000 { compatible = "fsl,imx8qm-edma"; reg = <0x591f0000 0x190000>; #dma-cells = <3>; - shared-interrupt; dma-channels = <24>; dma-channel-mask = <0x5c0c00>; interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */ @@ -127,7 +126,6 @@ audio_subsys: bus@59000000 { compatible = "fsl,imx8qm-edma"; reg = <0x599f0000 0xc0000>; #dma-cells = <3>; - shared-interrupt; dma-channels = <11>; dma-channel-mask = <0xc0>; interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */ diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 3c42240e78..4aaf5a0c1e 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; - clocks = <&usb2_lpcg 0>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_6>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; @@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 { usbphy1: usbphy@5b100000 { compatible = "fsl,imx7ulp-usbphy"; reg = <0x5b100000 0x1000>; - clocks = <&usb2_lpcg 1>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_7>; power-domains = <&pd IMX_SC_R_USB_0_PHY>; status = "disabled"; }; @@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>; + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; @@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b020000 0x10000>; clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, - <&sdhc1_lpcg IMX_LPCG_CLK_0>, - <&sdhc1_lpcg IMX_LPCG_CLK_5>; + <&sdhc1_lpcg IMX_LPCG_CLK_5>, + <&sdhc1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; @@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b030000 0x10000>; clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, - <&sdhc2_lpcg IMX_LPCG_CLK_0>, - <&sdhc2_lpcg IMX_LPCG_CLK_5>; + <&sdhc2_lpcg IMX_LPCG_CLK_5>, + <&sdhc2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index b0bb77150a..67b3c75732 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -27,8 +27,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi0_lpcg 0>, - <&spi0_lpcg 1>; + clocks = <&spi0_lpcg IMX_LPCG_CLK_0>, + <&spi0_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -43,8 +43,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi1_lpcg 0>, - <&spi1_lpcg 1>; + clocks = <&spi1_lpcg IMX_LPCG_CLK_0>, + <&spi1_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -59,8 +59,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi2_lpcg 0>, - <&spi2_lpcg 1>; + clocks = <&spi2_lpcg IMX_LPCG_CLK_0>, + <&spi2_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -75,8 +75,8 @@ dma_subsys: bus@5a000000 { #size-cells = <0>; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&spi3_lpcg 0>, - <&spi3_lpcg 1>; + clocks = <&spi3_lpcg IMX_LPCG_CLK_0>, + <&spi3_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; @@ -144,8 +144,8 @@ dma_subsys: bus@5a000000 { compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; reg = <0x5a190000 0x1000>; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_pwm_lpcg 1>, - <&adma_pwm_lpcg 0>; + clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>, + <&adma_pwm_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -377,8 +377,8 @@ dma_subsys: bus@5a000000 { reg = <0x5a880000 0x10000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adc0_lpcg 0>, - <&adc0_lpcg 1>; + clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, + <&adc0_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -392,8 +392,8 @@ dma_subsys: bus@5a000000 { reg = <0x5a890000 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adc1_lpcg 0>, - <&adc1_lpcg 1>; + clocks = <&adc1_lpcg IMX_LPCG_CLK_0>, + <&adc1_lpcg IMX_LPCG_CLK_4>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; @@ -406,8 +406,8 @@ dma_subsys: bus@5a000000 { reg = <0x5a8d0000 0x10000>; interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -427,8 +427,8 @@ dma_subsys: bus@5a000000 { * CAN1 shares CAN0's clock and to enable CAN0's clock it * has to be powered on. */ - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; @@ -448,8 +448,8 @@ dma_subsys: bus@5a000000 { * CAN2 shares CAN0's clock and to enable CAN0's clock it * has to be powered on. */ - clocks = <&can0_lpcg 1>, - <&can0_lpcg 0>; + clocks = <&can0_lpcg IMX_LPCG_CLK_4>, + <&can0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <40000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 7e510b21bb..764c1a08e3 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -25,8 +25,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d000000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm0_lpcg 4>, - <&pwm0_lpcg 1>; + clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>, + <&pwm0_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -38,8 +38,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d010000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm1_lpcg 4>, - <&pwm1_lpcg 1>; + clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>, + <&pwm1_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -51,8 +51,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d020000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm2_lpcg 4>, - <&pwm2_lpcg 1>; + clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>, + <&pwm2_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; @@ -64,8 +64,8 @@ lsio_subsys: bus@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d030000 0x10000>; clock-names = "ipg", "per"; - clocks = <&pwm3_lpcg 4>, - <&pwm3_lpcg 1>; + clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>, + <&pwm3_lpcg IMX_LPCG_CLK_1>; assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; #pwm-cells = <3>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index a414df6453..6d13e4fafb 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -13,6 +13,13 @@ clock-frequency = <250000000>; clock-output-names = "conn_enet0_root_clk"; }; + + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; }; &conn_subsys { @@ -22,7 +29,7 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eth_wake_irq", "macirq"; + interrupt-names = "macirq", "eth_wake_irq"; clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, <&eqos_lpcg IMX_LPCG_CLK_6>, <&eqos_lpcg IMX_LPCG_CLK_0>, @@ -53,13 +60,6 @@ rx-burst-size-dword = <0x10>; power-domains = <&pd IMX_SC_R_USB_1>; status = "disabled"; - - clk_dummy: clock-dummy { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "clk_dummy"; - }; }; usbmisc2: usbmisc@5b0e0200 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi index 550f513708..3569abb5bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi @@ -4,6 +4,6 @@ */ &ddr_pmu0 { - compatible = "fsl,imx8-ddr-pmu"; + compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu"; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index f264102bdb..62ed64663f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -3,6 +3,8 @@ * Copyright 2020 Compass Electronics Group, LLC */ +#include "imx8mm-overdrive.dtsi" + / { aliases { rtc0 = &rtc; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi index d897a85273..44c2cba41a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi @@ -104,7 +104,7 @@ compatible = "nxp,pca8574"; reg = <0x3a>; gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index a882c86ec3..b53104ed89 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -367,12 +367,6 @@ interrupts = <11 8>; status = "okay"; - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - typec1_con: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -384,6 +378,12 @@ PDO_VAR(5000, 20000, 3000)>; op-sink-microwatt = <15000000>; self-powered; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index 0e8f0d7161..12fb79d20b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -220,7 +220,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c3@0 { + i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi new file mode 100644 index 0000000000..b31436b5e9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&gpu_2d { + assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; +}; + +&gpu_3d { + assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; +}; + +&vpu_blk_ctrl { + assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>, + <&clk IMX8MM_CLK_VPU_G2>, + <&clk IMX8MM_CLK_VPU_H1>, + <&clk IMX8MM_VPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + <&clk IMX8MM_VPU_PLL_OUT>, + <&clk IMX8MM_SYS_PLL3_OUT>; + assigned-clock-rates = <750000000>, + <700000000>, + <750000000>, + <700000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts index 968f475b9a..27a902569e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts @@ -120,7 +120,7 @@ }; tpm: tpm@1 { - compatible = "tcg,tpm_tis-spi"; + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio2>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 156d793a0c..ea6e8b8516 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx"; compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 3a0a10e835..752caa38eb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -84,8 +84,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio1 { @@ -152,23 +159,30 @@ pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@1,0 { + pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@2,3 { + pcie@3,0 { reg = <0x1800 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - eth1: pcie@5,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; local-mac-address = [00 00 00 00 00 00]; }; @@ -312,6 +326,7 @@ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index d79fe9f62b..2aa6c1090f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -109,7 +109,7 @@ status = "okay"; tpm@1 { - compatible = "tcg,tpm_tis-spi"; + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; reg = <0x1>; spi-max-frequency = <36000000>; }; @@ -179,23 +179,30 @@ pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@1,0 { + pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@2,4 { + pcie@4,0 { reg = <0x2000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - eth1: pcie@6,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 06a394a41d..c11260c26d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -635,13 +635,16 @@ pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - eth1: pcie@1,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi new file mode 100644 index 0000000000..4a0799d634 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + /* SODIMM 52 - USER_LED_1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 54 - USER_LED_1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 56 - USER_LED_2_RED */ + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 58 - USER_LED_2_GREEN */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm_irq>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <18500000>; + }; +}; + +/* EEPROM on Mallow */ +&eeprom_carrier_board { + status = "okay"; +}; + +/* Verdin ETH_1 */ +&fec1 { + status = "okay"; +}; + +/* Temperature sensor on Mallow */ +&hwmon_temp { + compatible = "ti,tmp1075"; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl_leds: ledsgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x106>, /* SODIMM 52 */ + <MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x106>, /* SODIMM 54 */ + <MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x106>, /* SODIMM 56 */ + <MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x106>; /* SODIMM 58 */ + }; + + pinctrl_tpm_cs: tpmcsgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x146>; /* SODIMM 64 */ + }; + + pinctrl_tpm_irq: tpmirqgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x141>; /* SODIMM 66 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts new file mode 100644 index 0000000000..1b1999f3a8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-nonwifi.dtsi" +#include "imx8mm-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini on Mallow"; + compatible = "toradex,verdin-imx8mm-nonwifi-mallow", + "toradex,verdin-imx8mm-nonwifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts new file mode 100644 index 0000000000..2916145f31 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Mallow"; + compatible = "toradex,verdin-imx8mm-wifi-mallow", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 54faf83cb4..8a1b42b94d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -636,6 +636,8 @@ clk: clock-controller@30380000 { compatible = "fsl,imx8mm-ccm"; reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; @@ -647,7 +649,6 @@ <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, - <&clk IMX8MM_VIDEO_PLL1>, <&clk IMX8MM_AUDIO_PLL1>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, <&clk IMX8MM_ARM_PLL_OUT>, @@ -657,7 +658,6 @@ <400000000>, <400000000>, <750000000>, - <594000000>, <393216000>; }; @@ -1133,7 +1133,7 @@ assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, <&clk IMX8MM_SYS_PLL2_1000M>, <&clk IMX8MM_SYS_PLL1_800M>; - assigned-clock-rates = <594000000>, <500000000>, <200000000>; + assigned-clock-rates = <24000000>, <500000000>, <200000000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; status = "disabled"; @@ -1151,12 +1151,8 @@ clocks = <&clk IMX8MM_CLK_DSI_CORE>, <&clk IMX8MM_CLK_DSI_PHY_REF>; clock-names = "bus_clk", "sclk_mipi"; - assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, - <&clk IMX8MM_CLK_DSI_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, - <&clk IMX8MM_CLK_24M>; - assigned-clock-rates = <266000000>, <24000000>; - samsung,pll-clock-frequency = <24000000>; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index 90073b1653..2a64115eeb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -3,6 +3,8 @@ * Copyright 2020 Compass Electronics Group, LLC */ +#include "imx8mn-overdrive.dtsi" + / { aliases { rtc0 = &rtc; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi index 22a754d438..bbb07c650d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi @@ -7,6 +7,7 @@ /dts-v1/; #include "imx8mn.dtsi" +#include "imx8mn-bsh-smm-s2-display.dtsi" / { chosen { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi new file mode 100644 index 0000000000..7675583a6b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 BSH + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 700000 0>; /* 700000 ns = 1337Hz */ + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <50>; + status = "okay"; + }; + + reg_3v3_dvdd: regulator-3v3-O3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvdd>; + regulator-name = "3v3-dvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + reg_v3v3_avdd: regulator-3v3-O2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_avdd>; + regulator-name = "3v3-avdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + status = "okay"; +}; + +&lcdif { + assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>; + assigned-clock-rates = <594000000>; + status = "okay"; +}; + +&pgc_dispmix { + assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <500000000>, <200000000>; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <12000000>; + status = "okay"; + + panel@0 { + compatible = "sharp,ls068b3sx02", "syna,r63353"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel>; + reg = <0>; + + backlight = <&backlight>; + dvdd-supply = <®_3v3_dvdd>; + avdd-supply = <®_v3v3_avdd>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + }; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&iomuxc { + pinctrl_avdd: avddgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x16 /* VDD 3V3_VO2 */ + >; + }; + + /* This is for both PWM and voltage regulators for display */ + pinctrl_bl: blgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x16 + >; + }; + + pinctrl_dvdd: dvddgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 /* VDD 3V3_VO3 */ + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x16 /* panel reset */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts new file mode 100644 index 0000000000..6f9b82958b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 DimOnOff + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mn-var-som-symphony.dts" + +/ { + model = "DimOnOff Gateway EVK board"; + compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn", + "fsl,imx8mn"; + + /* + * U30 FPF2193 regulator. + * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49). + */ + reg_disp_3v3: regulator-disp-3v3 { + compatible = "regulator-fixed"; + regulator-name = "Display 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-enter { + label = "enter"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + wakeup-source; + }; + }; + + /* Bourns PEC12R rotary encoder, 24 steps. */ + rotary: rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rotary>; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */ + <&gpio5 13 GPIO_ACTIVE_LOW>; /* B */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; +}; + +/* Disable Asynchronous Sample Rate Converter (audio) */ +&easrc { + status = "disabled"; +}; + +&ecspi1 { + /* Resistive touch controller */ + /delete-node/ touchscreen@0; +}; + +&gpu { + status = "disabled"; +}; + +&i2c2 { + adc@48 { + compatible = "ti,ads7924"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc>; + vref-supply = <®_disp_3v3>; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + label = "Pot0"; + }; + channel@1 { + reg = <1>; + label = "Pot1"; + }; + channel@2 { + reg = <2>; + label = "Pot2"; + }; + channel@3 { + reg = <3>; + label = "Pot3"; + }; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + reset-source; /* For watchdog. */ + }; + + rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reset-source; /* For watchdog. */ + interrupt-parent = <&gpio5>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */ + }; +}; + +&i2c3 { + touchscreen@38 { + status = "disabled"; + }; + + codec@1a { + status = "disabled"; + }; + + /* DS1337 RTC module */ + rtc@68 { + status = "disabled"; + }; +}; + +&sai5 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xc6 + >; + }; + + pinctrl_rotary: rotarygrp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x00000156 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000156 + >; + }; + + pinctrl_adc: adcgrp { + fsl,pins = < + MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x00000156 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x00000156 + MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x00000156 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 3f6a19839c..a0e13d3324 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -221,12 +221,6 @@ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; status = "okay"; - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - typec1_con: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -238,6 +232,12 @@ PDO_VAR(5000, 20000, 3000)>; op-sink-microwatt = <15000000>; self-powered; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi new file mode 100644 index 0000000000..5d03fb893e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&gpu { + assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>, + <&clk IMX8MN_CLK_GPU_SHADER>, + <&clk IMX8MN_CLK_GPU_AXI>, + <&clk IMX8MN_CLK_GPU_AHB>, + <&clk IMX8MN_GPU_PLL>; + assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>, + <&clk IMX8MN_GPU_PLL_OUT>, + <&clk IMX8MN_SYS_PLL1_800M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <600000000>, + <600000000>, + <800000000>, + <400000000>, + <1200000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts new file mode 100644 index 0000000000..1b633bd1eb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 DimOnOff + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mn-var-som.dtsi" + +/ { + model = "RVE gateway"; + compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn"; + + crystal_duart_24m: crystal-duart-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-enter { + label = "enter"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + }; + + key-exit { + label = "exit"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ESC>; + }; + }; + + lcd { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + data-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>, + <&gpio1 6 GPIO_ACTIVE_HIGH>, + <&gpio1 14 GPIO_ACTIVE_HIGH>, + <&gpio4 28 GPIO_ACTIVE_HIGH>, + <&gpio5 24 GPIO_ACTIVE_HIGH>, + <&gpio5 2 GPIO_ACTIVE_HIGH>, + <&gpio1 12 GPIO_ACTIVE_HIGH>, + <&gpio5 25 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* Bourns PEC12R rotary encoder, 24 steps. */ + rotary: rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rotary>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>, /* A */ + <&gpio3 21 GPIO_ACTIVE_LOW>; /* B */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; +}; + +&ecspi1 { + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + + duart1: serial@0 { + compatible = "nxp,sc16is752"; + reg = <0>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + clocks = <&crystal_duart_24m>; + interrupt-parent = <&gpio3>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3", + "RADIO4", "RADIO_RESET", "TP12", "TP11"; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + }; + + /delete-node/ touchscreen@0; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + duart2: serial@0 { + compatible = "nxp,sc16is752"; + reg = <0>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + clocks = <&crystal_duart_24m>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER", + "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1", + "GPIO_EXT0", "TP13"; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + }; +}; + +/* Configure PWM pins in GPIO mode: */ +&gpio5 { + gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1"; +}; + +&gpu { + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + /* Carrier board EEPROM */ + eeprom_cb: eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + vcc-supply = <®_3p3v>; + }; + + lm75: sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + vs-supply = <®_3p3v>; + }; + + mcp7940: rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&i2c3 { + codec@1a { + status = "disabled"; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pcf8574_1: gpio@38 { + compatible = "nxp,pcf8574"; + reg = <0x38>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3", + "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4", + "LED_B_COMM4"; + }; + + pcf8574_2: gpio@39 { + compatible = "nxp,pcf8574"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1", + "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1", + "TP16", "TP17"; + }; +}; + +/* Bluetooth */ +&uart2 { + status = "disabled"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* SD interface on expansion connector. */ +&usdhc2 { + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13 + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13 + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x13 /* SS0 */ + MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x13 /* SC16 IRQ */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x13 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x13 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x13 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x13 /* SS0 */ + MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x13 /* SC16 IRQ */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0xc6 /* Enter */ + MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xc6 /* Exit */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x00000156 /* D0 */ + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x00000156 /* D1 */ + MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x00000156 /* D2 */ + MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x00000156 /* D3 */ + MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x00000156 /* D4 */ + MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x00000156 /* D5 */ + MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00000156 /* D6 */ + MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x00000156 /* D7 */ + MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x00000156 /* E */ + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x00000156 /* RS */ + MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x00000156 /* R/W */ + >; + }; + + pinctrl_rotary: rotarygrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x00000156 /* A */ + MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x00000156 /* B */ + >; + }; + + /* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts index 3f1e49bfe3..c07d59147a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx"; compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts index a7a57442cb..a6b94d1957 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts @@ -57,6 +57,15 @@ linux,default-trigger = "heartbeat"; }; }; + + /* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */ + reg_per_3v3: regulator-peripheral-3v3 { + compatible = "regulator-fixed"; + regulator-name = "per_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; ðphy { @@ -79,6 +88,7 @@ interrupts = <7 IRQ_TYPE_EDGE_FALLING>; #gpio-cells = <2>; wakeup-source; + vcc-supply = <®_per_3v3>; /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ usb3-sata-sel-hog { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index b8946edf31..b364307868 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -31,6 +31,14 @@ gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_3v3_fixed: regulator-3v3-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &A53_0 { @@ -234,6 +242,7 @@ compatible = "atmel,24c04"; reg = <0x52>; pagesize = <16>; + vcc-supply = <®_3v3_fixed>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 1bb1d0c1ba..136e75c512 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -637,6 +637,8 @@ clk: clock-controller@30380000 { compatible = "fsl,imx8mn-ccm"; reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index 0bea0798d2..a08057410b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -94,6 +94,17 @@ }; }; + bridge-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -153,6 +164,21 @@ enable-active-high; }; + sound-adv7535 { + compatible = "simple-audio-card"; + simple-audio-card,name = "sound-adv7535"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sai5>; + system-clock-direction-out; + }; + + simple-audio-card,codec { + sound-dai = <&adv_bridge>; + }; + }; + sound-dmic { compatible = "simple-audio-card"; simple-audio-card,name = "sound-pdm"; @@ -208,7 +234,7 @@ status = "okay"; tpm: tpm@0 { - compatible = "infineon,slb9670"; + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; reg = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm>; @@ -274,6 +300,35 @@ #interrupt-cells = <2>; }; + adv_bridge: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; + reg-names = "main", "cec", "edid", "packet"; + adi,dsi-lanes = <4>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7535_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + pcieclk: clock-generator@68 { compatible = "renesas,9fgv0241"; reg = <0x68>; @@ -398,6 +453,10 @@ }; }; +&lcdif1 { + status = "okay"; +}; + &micfil { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pdm>; @@ -407,6 +466,21 @@ status = "okay"; }; +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -433,6 +507,16 @@ status = "okay"; }; +&sai5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + assigned-clocks = <&clk IMX8MP_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -612,6 +696,14 @@ >; }; + pinctrl_sai5: sai5grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0xd6 + >; + }; + pinctrl_tpm: tpmgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 267ceffc02..2c19766ebf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -75,7 +75,7 @@ &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; - phy-connection-type = "rgmii-id"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts index 0afd90224a..b11d694b98 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts @@ -63,6 +63,50 @@ regulator-always-on; }; + reg_csi1_1v8: regulator-csi1-vdd1v8 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "CSI1_VDD1V8"; + gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_baseboard_vdd3v3>; + }; + + reg_csi1_3v3: regulator-csi1-vdd3v3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "CSI1_VDD3V3"; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd5v0>; + }; + + reg_csi2_1v8: regulator-csi2-vdd1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_csi2_1v8>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "CSI2_VDD1V8"; + gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_baseboard_vdd3v3>; + }; + + reg_csi2_3v3: regulator-csi2-vdd3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_csi2_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "CSI2_VDD3V3"; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd5v0>; + }; + regulator-vbus-usb20 { compatible = "regulator-fixed"; regulator-min-microvolt = <5000000>; @@ -413,6 +457,18 @@ >; }; + pinctrl_reg_csi2_1v8: regcsi21v8grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x19 + >; + }; + + pinctrl_reg_csi2_3v3: regcsi23v3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi index bc312aa1bf..91094c2277 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi @@ -6,6 +6,8 @@ #include "imx8mp.dtsi" +#include <dt-bindings/leds/common.h> + / { model = "Polyhex i.MX8MPlus Debix SOM A"; compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp"; @@ -20,6 +22,20 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + }; }; &A53_0 { @@ -203,6 +219,12 @@ }; &iomuxc { + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index d8963f32ec..43f1d45ccc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -255,7 +255,7 @@ <&clk IMX8MP_AUDIO_PLL2_OUT>; assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>; assigned-clock-rates = <13000000>, <13000000>, <156000000>; - reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; status = "disabled"; ports { @@ -420,6 +420,18 @@ reg = <0x53>; }; + eeprom0wl: eeprom@58 { + compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x50 */ + pagesize = <32>; + reg = <0x58>; + }; + + eeprom1wl: eeprom@5b { + compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x53 */ + pagesize = <32>; + reg = <0x5b>; + }; + ioexp: gpio@74 { compatible = "nxp,pca9539"; reg = <0x74>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 92f8cc05fe..9beba8d6a0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -144,6 +144,28 @@ }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_vdev0vring0: vdev0vring0@942f0000 { + reg = <0 0x942f0000 0 0x8000>; + no-map; + }; + + dsp_vdev0vring1: vdev0vring1@942f8000 { + reg = <0 0x942f8000 0 0x8000>; + no-map; + }; + + dsp_vdev0buffer: vdev0buffer@94300000 { + compatible = "shared-dma-pool"; + reg = <0 0x94300000 0 0x100000>; + no-map; + }; + }; }; &flexspi { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts index e4215c83ee..da4b1807c2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -57,8 +57,8 @@ clocks = <&clk IMX8MP_CLK_CLKOUT1>; #sound-dai-cells = <0>; - VDDA-supply = <®_vcc_3v3_audio>; - VDDD-supply = <®_vcc_1v8_audio>; + VDDA-supply = <®_vcc_3v3_audio>; + VDDD-supply = <®_vcc_1v8_audio>; VDDIO-supply = <®_vcc_1v8_audio>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi new file mode 100644 index 0000000000..59813ef8e2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi @@ -0,0 +1,711 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "imx8mp.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + /* some of this aliases like backlight0, ethernetX and switch0 + * are needed for the bootloader. + */ + backlight0 = &backlight; + ethernet0 = &eqos; + ethernet1 = &lan1; + ethernet2 = &lan2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + switch0 = &switch; + }; + + /* + * Backlight is present only on some of boards, so it is disabled by + * default. + */ + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 20000 0>; + power-supply = <®_24v>; + enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 255>; + num-interpolated-steps = <17>; + default-brightness-level = <8>; + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + label = "D1"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "D2"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "D3"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_1v2: regulator-1v2 { + compatible = "regulator-fixed"; + vin-supply = <®_5v_p>; + regulator-name = "1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + vin-supply = <®_5v_s>; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + vin-supply = <®_5v_s>; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * This regulator will provide power as long as possible even if + * undervoltage is detected. + */ + reg_5v_p: regulator-5v-p { + compatible = "regulator-fixed"; + regulator-name = "5V_P"; + vin-supply = <®_24v>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* + * This regulator will be automatically shutdown if undervoltage is + * detected. + */ + reg_5v_s: regulator-5v-s { + compatible = "regulator-fixed"; + regulator-name = "5V_S"; + vin-supply = <®_24v>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_24v: regulator-24v { + compatible = "regulator-fixed"; + regulator-name = "24V"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + + reg_can2rs: regulator-can2rs { + compatible = "regulator-fixed"; + regulator-name = "CAN2RS"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2rs>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; + + reg_canrs: regulator-canrs { + compatible = "regulator-fixed"; + regulator-name = "CANRS"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_canrs>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + }; + + reg_tft_vcom: regulator-tft-vcom { + compatible = "pwm-regulator"; + pwms = <&pwm4 0 20000 0>; + regulator-name = "VCOM"; + vin-supply = <®_5v_s>; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + voltage-table = <3600000 26>; + status = "disabled"; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vsd_3v3>; + vin-supply = <®_vdd_3v3>; + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc: adc@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + vref-supply = <®_vdd_3v3>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-txid"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_canrs>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2rs>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram_1v1: BUCK6 { + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs_1v8: LDO1 { + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda_1v8: LDO3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd2: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + i2c_rtc: rtc@51 { + compatible = "nxp,pcf85063tp"; + reg = <0x51>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>; + quartz-load-femtofarads = <12500>; + }; +}; + +&i2c4 { + clock-frequency = <380000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + switch: switch@5f { + compatible = "microchip,ksz9893"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + reg = <0x5f>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + phy-mode = "internal"; + label = "lan1"; + }; + + lan2: port@1 { + reg = <1>; + phy-mode = "internal"; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&eqos>; + phy-mode = "rgmii"; + /* 2ns RX delay is implemented on PCB */ + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_3v3>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_3v3>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; +}; + +/* SD Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_vsd_3v3>; + vqmmc-supply = <®_nvcc_sd2>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0100 + >; + }; + + pinctrl_can2rs: can2rsgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x154 + >; + }; + + pinctrl_canrs: canrsgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x154 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19 + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19 + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x116 + >; + }; + + pinctrl_reg_vsd_3v3: regvsd3v3grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x41 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x41 + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x41 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + /* external 10 k pull up */ + /* CTP_INT */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41 + /* CTP_RST */ + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts new file mode 100644 index 0000000000..c1ca69da3c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revB - HDMI"; + compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp"; +}; + +&iomuxc { + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts new file mode 100644 index 0000000000..ccbd3abedd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revB - LT6"; + compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp"; + + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>; + io-channel-names = "y", "z1", "z2", "x"; + touchscreen-min-pressure = <65000>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + touchscreen-x-plate-ohms = <300>; + }; +}; + +®_tft_vcom { + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + voltage-table = <3600000 26>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc_ts: adc@0 { + compatible = "ti,tsc2046e-adc"; + reg = <0>; + pinctrl-0 = <&pinctrl_touch>; + pinctrl-names ="default"; + spi-max-frequency = <1000000>; + interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + /* external pull up */ + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts new file mode 100644 index 0000000000..3c2efdc59b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1"; + compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp"; + + panel { + compatible = "multi-inno,mi1010ait-1cp"; + backlight = <&backlight>; + power-supply = <®_tft_vcom>; + + port { + in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + vcc-supply = <®_vdd_3v3>; + iovcc-supply = <®_vdd_3v3>; + wakeup-source; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + /* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */ + assigned-clock-rates = <482300000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&in_lvds0>; + }; + }; + }; +}; + +&media_blk_ctrl { + /* currently it is not possible to let display clocks confugure + * automatically, so we need to set them manually + */ + assigned-clock-rates = <500000000>, <200000000>, <0>, + /* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */ + <68900000>, + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */ + <964600000>; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_tft_vcom { + regulator-min-microvolt = <3160000>; + regulator-max-microvolt = <3160000>; + voltage-table = <3160000 73>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso new file mode 100644 index 0000000000..5058cd9409 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/imx8mp-clock.h> + +&{/} { + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; +}; + +&backlight_lvds { + status = "okay"; +}; + +&display { + compatible = "auo,g133han01"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + panel_in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + panel_in_lvds1: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, + <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + assigned-clock-rates = <0>, <988400000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + + port@2 { + ldb_lvds_ch1: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 258e90cc16..86d3da36e4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -15,6 +15,7 @@ / { model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + chassis-type = "embedded"; chosen { stdout-path = &uart4; @@ -55,6 +56,21 @@ clock-frequency = <25000000>; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X29"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + fan0: pwm-fan { compatible = "pwm-fan"; pinctrl-names = "default"; @@ -609,7 +625,6 @@ &usb3_1 { fsl,disable-port-power-control; fsl,permanently-attached; - dr_mode = "host"; status = "okay"; }; @@ -633,13 +648,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - label = "X29"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon0>; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi index bf47b5e9dd..0e8d0f3c7e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi @@ -8,6 +8,21 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + type = "micro"; + label = "Type-C"; + id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -132,13 +147,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - type = "micro"; - label = "Type-C"; - id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi index f942e94908..f24b147447 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi @@ -8,6 +8,22 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + type = "micro"; + label = "otg"; + vbus-supply = <®_usb1_vbus>; + id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -83,8 +99,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio4 { @@ -161,7 +184,6 @@ }; &usb3_phy0 { - vbus-supply = <®_usb1_vbus>; status = "okay"; }; @@ -175,13 +197,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - type = "micro"; - label = "otg"; - id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; @@ -285,6 +304,7 @@ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi index b0d42b18c5..f5491a608b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi @@ -8,6 +8,22 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + type = "micro"; + label = "otg"; + vbus-supply = <®_usb1_vbus>; + id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -100,7 +116,7 @@ status = "okay"; tpm@1 { - compatible = "tcg,tpm_tis-spi"; + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; reg = <0x1>; spi-max-frequency = <36000000>; }; @@ -187,7 +203,6 @@ }; &usb3_phy0 { - vbus-supply = <®_usb1_vbus>; status = "okay"; }; @@ -201,13 +216,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - type = "micro"; - label = "otg"; - id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 2ab9f4cc12..cae586cd45 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -35,6 +35,21 @@ reg = <0x0 0x40000000 0 0x80000000>; }; + connector { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "Type-C"; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -181,9 +196,7 @@ status = "okay"; tpm@0 { - compatible = "tcg,tpm_tis-spi"; - #address-cells = <0x1>; - #size-cells = <0x1>; + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; reg = <0x0>; spi-max-frequency = <36000000>; }; @@ -694,13 +707,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - label = "Type-C"; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi new file mode 100644 index 0000000000..8482393f3c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + /* SODIMM 52 - USER_LED_1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 54 - USER_LED_1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 56 - USER_LED_2_RED */ + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 58 - USER_LED_2_GREEN */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&backlight { + power-supply = <®_3p3v>; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm_irq>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <18500000>; + }; +}; + +/* EEPROM on Mallow */ +&eeprom_carrier_board { + status = "okay"; +}; + +/* Verdin ETH_1 */ +&eqos { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&flexcan1 { + status = "okay"; +}; + +/* Verdin CAN_2 */ +&flexcan2 { + status = "okay"; +}; + +/* Temperature sensor on Mallow */ +&hwmon_temp { + compatible = "ti,tmp1075"; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + status = "okay"; +}; + +®_usdhc2_vmmc { + vin-supply = <®_3p3v>; +}; + +/* Verdin UART_1 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_1 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl_leds: ledsgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x106>, /* SODIMM 52 */ + <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x106>, /* SODIMM 54 */ + <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x106>, /* SODIMM 56 */ + <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x106>; /* SODIMM 58 */ + }; + + pinctrl_tpm_cs: tpmcsgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x82>; /* SODIMM 64 */ + }; + + pinctrl_tpm_irq: tpmirqgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x16>; /* SODIMM 66 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts new file mode 100644 index 0000000000..6a536a4964 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Mallow Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-mallow", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts new file mode 100644 index 0000000000..08b7aef3fd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Mallow Board"; + compatible = "toradex,verdin-imx8mp-wifi-mallow", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index 04f2083c4a..c3305f0d40 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -45,6 +45,23 @@ status = "disabled"; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + label = "Type-C"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_1_id>; + self-powered; + type = "micro"; + vbus-supply = <®_usb1_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -835,15 +852,10 @@ srp-disable; usb-role-switch; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - label = "Type-C"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_1_id>; - self-powered; - type = "micro"; - vbus-supply = <®_usb1_vbus>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 1264da6012..39a550c1cd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -264,6 +264,7 @@ dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; + status = "disabled"; }; }; @@ -726,6 +727,8 @@ clk: clock-controller@30380000 { compatible = "fsl,imx8mp-ccm"; reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; @@ -793,8 +796,8 @@ <&clk IMX8MP_CLK_AUDIO_AXI>; assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>, <&clk IMX8MP_CLK_AUDIO_AXI_SRC>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <400000000>, <600000000>; }; @@ -887,6 +890,15 @@ clocks = <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>, <&clk IMX8MP_CLK_NPU_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>, + <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, + <800000000>, + <300000000>; }; }; }; @@ -1808,7 +1820,7 @@ compatible = "fsl,imx8mp-ldb"; reg = <0x5c 0x4>, <0x128 0x4>; reg-names = "ldb", "lvds"; - clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>; clock-names = "ldb"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; @@ -2012,6 +2024,18 @@ interconnect-names = "g1", "g2", "vc8000e"; }; + npu: npu@38500000 { + compatible = "vivante,gc"; + reg = <0x38500000 0x200000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_NPU_ROOT>, + <&clk IMX8MP_CLK_NPU_ROOT>, + <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>; + clock-names = "core", "shader", "bus", "reg"; + power-domains = <&pgc_mlmix>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts index 6376417e91..d8cf1f27c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -65,7 +65,7 @@ status = "okay"; tpm@0 { - compatible = "infineon,slb9670"; + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; reg = <0>; spi-max-frequency = <43000000>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts index a3b9d615a3..e34045d10a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts @@ -39,7 +39,7 @@ fan: gpio-fan { compatible = "gpio-fan"; - gpio-fan,speed-map = <0 0 8600 1>; + gpio-fan,speed-map = <0 0>, <8600 1>; gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; #cooling-cells = <2>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index 0d8def2766..b302daca4c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx"; compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 459ba2b9b7..cd96f9f75d 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -127,15 +127,15 @@ }; &flexcan2 { - clocks = <&can1_lpcg 1>, - <&can1_lpcg 0>; + clocks = <&can1_lpcg IMX_LPCG_CLK_4>, + <&can1_lpcg IMX_LPCG_CLK_0>; assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>; fsl,clk-source = /bits/ 8 <1>; }; &flexcan3 { - clocks = <&can2_lpcg 1>, - <&can2_lpcg 0>; + clocks = <&can2_lpcg IMX_LPCG_CLK_4>, + <&can2_lpcg IMX_LPCG_CLK_0>; assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>; fsl,clk-source = /bits/ 8 <1>; }; @@ -143,21 +143,25 @@ &lpuart0 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; + dma-names = "rx","tx"; }; &lpuart1 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; + dma-names = "rx","tx"; }; &lpuart2 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 17 0 0>, <&edma2 16 0 1>; + dma-names = "rx","tx"; }; &lpuart3 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 19 0 0>, <&edma2 18 0 1>; + dma-names = "rx","tx"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 9961172994..8360bb851a 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -31,7 +31,7 @@ }; gpio-sbu-mux { - compatible = "gpio-sbu-mux"; + compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec_mux>; select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; @@ -50,6 +50,10 @@ status = "okay"; }; +&dsp_reserved { + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -152,12 +156,6 @@ interrupt-parent = <&lsio_gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - port { - typec_dr_sw: endpoint { - remote-endpoint = <&usb3_drd_sw>; - }; - }; - usb_con1: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -169,8 +167,17 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + port@1 { reg = <1>; + typec_con_ss: endpoint { remote-endpoint = <&usb3_data_ss>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi new file mode 100644 index 0000000000..7894a3ab26 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +&vpu_core0 { + reg = <0x2d040000 0x10000>; +}; + +&vpu_core1 { + reg = <0x2d050000 0x10000>; +}; + +/delete-node/ &mu2_m0; +/delete-node/ &vpu_core2; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index c80c85a4b4..958267b333 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -48,7 +48,6 @@ serial3 = &lpuart3; vpu-core0 = &vpu_core0; vpu-core1 = &vpu_core1; - vpu-core2 = &vpu_core2; }; cpus { @@ -184,6 +183,7 @@ dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; + status = "disabled"; }; encoder_rpc: encoder-rpc@94400000 { @@ -317,6 +317,7 @@ }; #include "imx8qxp-ss-img.dtsi" +#include "imx8qxp-ss-vpu.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 2b9d47716f..9921ea13ab 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -76,6 +76,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <12000>; enable-active-high; }; }; @@ -237,18 +238,19 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe - MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; @@ -265,14 +267,15 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe - MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts new file mode 100644 index 0000000000..af795ecf67 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts @@ -0,0 +1,709 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Markus Niebel + * Author: Alexander Stein + */ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/pwm/pwm.h> + +#include "imx93-tqma9352.dtsi" + +/{ + model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit"; + compatible = "tq,imx93-tqma9352-mba93xxca", + "tq,imx93-tqma9352", "fsl,imx93"; + chassis-type = "embedded"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + eeprom0 = &eeprom0; + rtc0 = &pcf85063; + rtc1 = &bbnsm_rtc; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pwms = <&tpm5 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_12v0>; + enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwmfan>; + fan-supply = <®_pwm_fan>; + #cooling-cells = <2>; + /* typical 25 kHz -> 40.000 nsec */ + pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>; + cooling-levels = <0 32 64 128 196 240>; + pulses-per-revolution = <2>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-a { + label = "switcha"; + linux,code = <BTN_0>; + gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch-b { + label = "switchb"; + linux,code = <BTN_1>; + gpios = <&expander0 7 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&expander2 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&expander2 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "V_5V0_MB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "V_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_12v0>; + }; + + thermal-zones { + cpu-thermal { + trips { + cpu_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + cpu_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&cpu_active0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&cpu_active1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&cpu_active2>; + cooling-device = <&fan0 3 3>; + }; + }; + }; + }; +}; + +&adc1 { + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy_eqos>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy_eqos: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos_phy>; + reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + enet-phy-lane-no-swap; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy_fec>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; + + ethphy_fec: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy>; + reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + enet-phy-lane-no-swap; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&gpio1 { + expander-irq-hog { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + input; + line-name = "PEX_INT#"; + }; + + tcpc-irq-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + input; + line-name = "USB_C_ALERT#"; + }; +}; + +&lpi2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3>; + status = "okay"; + + temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + eeprom2: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_3v3>; + }; + + expander0: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pexp_irq>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <®_3v3>; + gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#", + "MPCIE_1V5_EN", "MPCIE_3V3_EN", + "MPCIE_PERST#", "MPCIE_WDISABLE#", + "BUTTON_A#", "BUTTON_B#"; + + mpcie-wake-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + input; + line-name = "MPCIE_WAKE#"; + }; + + /* + * Controls the mPCIE slot reset which is low active as + * reset signal. The output-low states, the signal is + * inactive, e.g. not in reset + */ + mpcie_rst_hog: mpcie-rst-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + output-low; + line-name = "MPCIE_PERST#"; + }; + + /* + * Controls the mPCIE slot WDISABLE pin which is low active + * as disable signal. The output-low states, the signal is + * inactive, e.g. not disabled + */ + mpcie_wdisable_hog: mpcie-wdisable-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-low; + line-name = "MPCIE_WDISABLE#"; + }; + }; + + expander1: gpio@71 { + compatible = "nxp,pca9538"; + reg = <0x71>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + gpio-line-names = "ENET1_RESET#", "ENET2_RESET#", + "USB_RESET#", "", + "WLAN_PD#", "WLAN_W_DISABLE#", + "WLAN_PERST#", "12V_EN"; + + /* + * Controls the on board USB Hub reset which is low + * active as reset signal. The output-low states, the + * signal is inactive, e.g. no reset + */ + usb-reset-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "USB_RESET#"; + }; + + /* + * Controls the WiFi card PD pin which is low active + * as power down signal. The output-high states, the signal + * is active, e.g. card is powered down + */ + wlan-pd-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + output-high; + line-name = "WLAN_PD#"; + }; + + /* + * Controls the WiFi card disable pin which is low active + * as disable signal. The output-high states, the signal + * is active, e.g. card is disabled + */ + wlan-wdisable-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-high; + line-name = "WLAN_W_DISABLE#"; + }; + + /* + * Controls the WiFi card reset pin which is low active + * as reset signal. The output-high states, the signal + * is active, e.g. card in reset + */ + wlan-perst-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + output-high; + line-name = "WLAN_PERST#"; + }; + }; + + expander2: gpio@72 { + compatible = "nxp,pca9538"; + reg = <0x72>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + gpio-line-names = "LCD_RESET#", "LCD_PWR_EN", + "LCD_BLT_EN", "DP_EN", + "MIPI_CSI_EN", "MIPI_CSI_RST#", + "USER_LED1", "USER_LED2"; + }; +}; + +&lpi2c5 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5>; + status = "okay"; +}; + +&lpspi6 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpspi6>; + pinctrl-1 = <&pinctrl_lpspi6>; + status = "okay"; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* disabled per default, console for M33 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&lpuart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + status = "okay"; +}; + +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm5>; +}; + +&tpm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm6>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + no-sdio; + no-mmc; + disable-wp; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e + /* PD | FSEL_2 | DSE X6 */ + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + /* PD | FSEL_3 | DSE X6 */ + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e + /* PD | FSEL_3 | DSE X3 */ + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e + >; + }; + + pinctrl_eqos_phy: eqosphygrp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e + /* PD | FSEL_2 | DSE X6 */ + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + /* PD | FSEL_3 | DSE X6 */ + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x51e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x51e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x51e + /* PD | FSEL_3 | DSE X3 */ + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e + >; + }; + + pinctrl_fec_phy: fecphygrp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX93_PAD_GPIO_IO25__CAN2_TX 0x139e + MX93_PAD_GPIO_IO27__CAN2_RX 0x139e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + >; + }; + + pinctrl_lpspi6: lpspi6grp { + fsl,pins = < + MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x3fe + MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe + MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe + MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe + >; + }; + + pinctrl_pexp_irq: pexpirqgrp { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306 + >; + }; + + pinctrl_pwmfan: pwmfangrp { + fsl,pins = < + MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1306 + >; + }; + + pinctrl_tpm5: tpm5grp { + fsl,pins = < + MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e + >; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = < + MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX93_PAD_UART2_TXD__LPUART2_TX 0x31e + MX93_PAD_UART2_RXD__LPUART2_RX 0x31e + MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e + MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e + MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e + MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2_hs: usdhc2hsgrp { + fsl,pins = < + /* HYS | PD | PU | FSEL_3 | DSE X5 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be + /* HYS | PD | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + /* HYS | PD | PU | FSEL_3 | DSE X3 */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + /* PD | PU | FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + >; + }; + + pinctrl_usdhc2_uhs: usdhc2uhsgrp { + fsl,pins = < + /* HYS | PD | PU | FSEL_3 | DSE X6 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + /* HYS | PD | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + /* PD | PU | FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts index 3c5c67ebee..eb3f4cfb69 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts @@ -18,6 +18,7 @@ model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC"; compatible = "tq,imx93-tqma9352-mba93xxla", "tq,imx93-tqma9352", "fsl,imx93"; + chassis-type = "embedded"; chosen { stdout-path = &lpuart1; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 34c0540276..8f2e7c42ad 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -171,6 +171,18 @@ status = "disabled"; }; + mqs1: mqs1 { + compatible = "fsl,imx93-mqs"; + gpr = <&aonmix_ns_gpr>; + status = "disabled"; + }; + + mqs2: mqs2 { + compatible = "fsl,imx93-mqs"; + gpr = <&wakeupmix_gpr>; + status = "disabled"; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -282,6 +294,19 @@ status = "disabled"; }; + i3c1: i3c-master@44330000 { + compatible = "silvaco,i3c-master-v1"; + reg = <0x44330000 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&clk IMX93_CLK_BUS_AON>, + <&clk IMX93_CLK_I3C1_GATE>, + <&clk IMX93_CLK_I3C1_SLOW>; + clock-names = "pclk", "fast_clk", "slow_clk"; + status = "disabled"; + }; + lpi2c1: i2c@44340000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x44340000 0x10000>; @@ -367,6 +392,19 @@ status = "disabled"; }; + sai1: sai@443b0000 { + compatible = "fsl,imx93-sai"; + reg = <0x443b0000 0x10000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma1 22 0 1>, <&edma1 21 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + iomuxc: pinctrl@443c0000 { compatible = "fsl,imx93-iomuxc"; reg = <0x443c0000 0x10000>; @@ -395,6 +433,8 @@ #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; clock-names = "osc_32k", "osc_24m", "clk_ext1"; + assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <393216000>; status = "okay"; }; @@ -422,9 +462,10 @@ }; }; - anatop: anatop@44480000 { - compatible = "fsl,imx93-anatop", "syscon"; + clock-controller@44480000 { + compatible = "fsl,imx93-anatop"; reg = <0x44480000 0x2000>; + #clock-cells = <1>; }; tmu: tmu@44482000 { @@ -447,6 +488,21 @@ #thermal-sensor-cells = <1>; }; + micfil: micfil@44520000 { + compatible = "fsl,imx93-micfil"; + reg = <0x44520000 0x10000>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_PDM_IPG>, + <&clk IMX93_CLK_PDM_GATE>, + <&clk IMX93_CLK_AUDIO_PLL>; + clock-names = "ipg_clk", "ipg_clk_app", "pll8k"; + dmas = <&edma1 29 0 5>; + dma-names = "rx"; + status = "disabled"; + }; adc1: adc@44530000 { compatible = "nxp,imx93-adc"; @@ -473,7 +529,6 @@ compatible = "fsl,imx93-edma4"; reg = <0x42000000 0x210000>; #dma-cells = <3>; - shared-interrupt; dma-channels = <64>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, @@ -616,6 +671,19 @@ status = "disabled"; }; + i3c2: i3c-master@42520000 { + compatible = "silvaco,i3c-master-v1"; + reg = <0x42520000 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_I3C2_GATE>, + <&clk IMX93_CLK_I3C2_SLOW>; + clock-names = "pclk", "fast_clk", "slow_clk"; + status = "disabled"; + }; + lpi2c3: i2c@42530000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x42530000 0x10000>; @@ -738,6 +806,51 @@ status = "disabled"; }; + sai2: sai@42650000 { + compatible = "fsl,imx93-sai"; + reg = <0x42650000 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 59 0 1>, <&edma2 58 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@42660000 { + compatible = "fsl,imx93-sai"; + reg = <0x42660000 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 61 0 1>, <&edma2 60 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + xcvr: xcvr@42680000 { + compatible = "fsl,imx93-xcvr"; + reg = <0x42680000 0x800>, + <0x42680800 0x400>, + <0x42680c00 0x080>, + <0x42680e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_SPDIF_GATE>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_AUD_XCVR_GATE>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&edma2 65 0 1>, <&edma2 66 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lpuart7: serial@42690000 { compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; @@ -755,7 +868,7 @@ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART8_GATE>; clock-names = "ipg"; - dmas = <&edma2 90 0 1>, <&edma2 89 0 0>; + dmas = <&edma2 90 0 1>, <&edma2 89 0 0>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -874,7 +987,7 @@ <&clk IMX93_CLK_USDHC1_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <8>; - fsl,tuning-start-tap = <20>; + fsl,tuning-start-tap = <1>; fsl,tuning-step = <2>; status = "disabled"; }; @@ -888,7 +1001,7 @@ <&clk IMX93_CLK_USDHC2_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-start-tap = <20>; + fsl,tuning-start-tap = <1>; fsl,tuning-step = <2>; status = "disabled"; }; @@ -951,7 +1064,7 @@ <&clk IMX93_CLK_USDHC3_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-start-tap = <20>; + fsl,tuning-start-tap = <1>; fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi index c06e011a6c..299c4ab630 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi @@ -10,10 +10,9 @@ / { spmi: spmi@fff24000 { compatible = "hisilicon,kirin970-spmi-controller"; + reg = <0x0 0xfff24000 0x0 0x1000>; #address-cells = <2>; #size-cells = <0>; - status = "okay"; - reg = <0x0 0xfff24000 0x0 0x1000>; hisilicon,spmi-channel = <2>; pmic: pmic@0 { diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index d3adb6a130..76aafa172e 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -60,6 +60,25 @@ }; }; + firmware { + svc { + compatible = "intel,agilex-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,agilex-soc-fpga-mgr"; + }; + }; + }; + + fpga-region { + compatible = "fpga-region"; + #address-cells = <0x2>; + #size-cells = <0x2>; + fpga-mgr = <&fpga_mgr>; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, @@ -130,7 +149,7 @@ compatible = "usb-nop-xceiv"; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -138,13 +157,6 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; - base_fpga_region { - #address-cells = <0x2>; - #size-cells = <0x2>; - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr>; - }; - clkmgr: clock-controller@ffd10000 { compatible = "intel,agilex-clkmgr"; reg = <0xffd10000 0x1000>; @@ -368,7 +380,7 @@ pinctrl-single,function-mask = <0x0000000f>; }; - pinctrl1: pinconf@ffd13100 { + pinctrl1: pinctrl@ffd13100 { compatible = "pinctrl-single"; #pinctrl-cells = <1>; reg = <0xffd13100 0x20>; @@ -659,17 +671,5 @@ status = "disabled"; }; - - firmware { - svc { - compatible = "intel,agilex-svc"; - method = "smc"; - memory-region = <&service_reserved>; - - fpga_mgr: fpga-mgr { - compatible = "intel,agilex-soc-fpga-mgr"; - }; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index dcdaf70649..d66d425e45 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -73,7 +73,7 @@ ranges; #interrupt-cells = <3>; #address-cells = <2>; - #size-cells =<2>; + #size-cells = <2>; interrupt-controller; #redistributor-regions = <1>; redistributor-stride = <0x0 0x20000>; @@ -315,7 +315,7 @@ num-cs = <4>; clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>; dmas = <&dmac0 2>, <&dmac0 3>; - dma-names ="tx", "rx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts index 1a32840c74..d22de06e98 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts @@ -26,7 +26,7 @@ reg = <0 0x80000000 0 0>; }; - soc { + soc@0 { bus@80000000 { compatible = "simple-bus"; reg = <0x80000000 0x60000000>, diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 0536906576..ad99aefeb1 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -113,8 +113,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <2>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index 5ddfdff37c..2d70a92c20 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -25,12 +25,11 @@ reg = <0 0x80000000 0 0>; }; - soc { + soc@0 { sdram_edac: memory-controller@f87f8000 { compatible = "snps,ddrc-3.80a"; reg = <0xf87f8000 0x400>; interrupts = <0 175 4>; - status = "okay"; }; }; }; @@ -91,8 +90,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <2>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 79ac09b58a..99b8cb3c49 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb +dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts new file mode 100644 index 0000000000..2a0b070000 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the AC5X RD Type 7 Com Express carrier board, + * Utilizing the CN913x COM Express CPU module board. + * This specific carrier board in this mode of operation (external) + * only maintains a PCIe link with the CPU module, + * which does not require any special DTS definitions. + * + * AC5X RD works here in external mode (switch selectable at the back of the + * board), and connect via an external cable a kit + * which would allow it to use an external CN9131 CPU COM Express module, + * mounted on top of an interposer kit. + * + * So in this case, once the switch is set to external mode as explained above, + * the AC5X RD becomes part of the carrier solution. + * + * When the board boots in the external CPU mode, the internal CPU is disabled, + * and only the switch portion of the SOC acts as a PCIe end-point, Hence there + * is no need to describe this internal (disabled CPU) in the device tree. + * + * There is no CPU booting in this mode on the carrier, only on the + * CN9131 COM Express CPU module. + * What runs the Linux is the CN9131 on the COM Express CPU module, + * And it accesses the switch end-point on the AC5X RD portion of the carrier + * via PCIe. + */ + +#include "cn9131-db-comexpress.dtsi" +#include "ac5x-rd-carrier.dtsi" + +/ { + model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module"; + compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier", + "marvell,cn9131-cpu-module", "marvell,cn9131", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x2 0x00000000>; + }; + +}; diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi new file mode 100644 index 0000000000..f98629abb5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the AC5X RD Type 7 Com Express carrier board, + * This specific board in external mode (see below) only maintains + * a PCIe link with the COM Express CPU module, which does not + * require any special DTS definitions. + * + * AC5X RD can either work as you would expect, as a complete standalone + * box using the internal CPU, or you can move the switch on the back of + * the box to "external" mode, and connect via an external cable a kit + * which would allow it to use an external CPU COM Express module, + * mounted on top of an interposer kit. + * + * So in this case, once the switch is set to external mode as explained above, + * the AC5X RD becomes part of the carrier solution. + * This is a development/reference solution, not a full commercial solution, + * hence it was designed with the flexibility to be configured in different + * modes of operation. + * + * When the board boots in the external CPU mode, the internal CPU is disabled, + * and only the switch portion of the SOC acts as a PCIe end-point, Hence there + * is no need to describe this internal (disabled CPU) in the device tree. + * + * There is no CPU booting in this mode on the carrier, + * only on the COM Express CPU module. + */ + +/ { + model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board"; + compatible = "marvell,rd-ac5x-carrier"; + +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 4249acdec5..f1a9f22343 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -312,7 +312,7 @@ * Also do not touch the "ports" or "port@n" nodes. These are also ABI. */ switch0@10 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x10>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; @@ -438,7 +438,7 @@ /* NOTE: this node name is ABI, don't change it! */ switch0@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; @@ -506,7 +506,7 @@ /* NOTE: this node name is ABI, don't change it! */ switch1@11 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x11>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; @@ -632,7 +632,7 @@ /* NOTE: this node name is ABI, don't change it! */ switch1@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; @@ -700,7 +700,7 @@ /* NOTE: this node name is ABI, don't change it! */ switch2@12 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x12>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; @@ -817,7 +817,7 @@ /* NOTE: this node name is ABI, don't change it! */ switch2@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi new file mode 100644 index 0000000000..028496ebc4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the CN9130-DB Com Express CPU module board. + */ + +#include "cn9130-db.dtsi" + +/ { + model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board"; + compatible = "marvell,cn9130-cpu-module", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + +}; + +&ap0_reg_sd_vccq { + regulator-max-microvolt = <1800000>; + states = <1800000 0x1 1800000 0x0>; + /delete-property/ gpios; +}; + +&cp0_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_usb3_vbus1 { + /delete-property/ gpio; +}; + +&cp0_reg_sd_vcc { + status = "disabled"; +}; + +&cp0_reg_sd_vccq { + status = "disabled"; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_eth0 { + status = "disabled"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + status = "disabled"; +}; + +&cp0_mdio { + status = "okay"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + phy0: ethernet-phy@0 { + status = "okay"; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + }; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_spi1 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + /delete-property/ phys; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi new file mode 100644 index 0000000000..6f3914bcfd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the CN9131-DB Com Express CPU module board. + */ + +#include "cn9131-db.dtsi" + +/ { + model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board"; + compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + +}; + +&ap0_reg_sd_vccq { + regulator-max-microvolt = <1800000>; + states = <1800000 0x1 1800000 0x0>; + /delete-property/ gpios; +}; + +&cp0_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_usb3_vbus1 { + /delete-property/ gpio; +}; + +&cp1_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_sd_vcc { + status = "disabled"; +}; + +&cp0_reg_sd_vccq { + status = "disabled"; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_eth0 { + status = "disabled"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + status = "disabled"; +}; + +&cp0_mdio { + status = "okay"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + phy0: ethernet-phy@0 { + status = "okay"; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + }; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_spi1 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index e6e7592a36..1e6f91731e 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -32,10 +32,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb @@ -44,6 +50,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index fffdb7bbf8..2d0ef6f23b 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -129,7 +129,7 @@ }; &pio { - eth_default: eth_default { + eth_default: eth-default-pins { tx_pins { pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, @@ -156,7 +156,7 @@ }; }; - eth_sleep: eth_sleep { + eth_sleep: eth-sleep-pins { tx_pins { pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, @@ -182,14 +182,14 @@ }; }; - usb0_id_pins_float: usb0_iddig { + usb0_id_pins_float: usb0-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; bias-pull-up; }; }; - usb1_id_pins_float: usb1_iddig { + usb1_id_pins_float: usb1-iddig-pins { pins_iddig { pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; bias-pull-up; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index ed1a9d3194..f767f921bd 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -249,10 +249,11 @@ #clock-cells = <1>; }; - infracfg: syscon@10001000 { + infracfg: clock-controller@10001000 { compatible = "mediatek,mt2712-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index b605313bed..a1b96013f8 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -8,8 +8,6 @@ pmic: pmic { compatible = "mediatek,mt6358"; interrupt-controller; - interrupt-parent = <&pio>; - interrupts = <182 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; mt6358codec: mt6358codec { @@ -128,7 +126,6 @@ }; mt6358_vrf12_reg: ldo_vrf12 { - compatible = "regulator-fixed"; regulator-name = "vrf12"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -136,7 +133,6 @@ }; mt6358_vio18_reg: ldo_vio18 { - compatible = "regulator-fixed"; regulator-name = "vio18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -153,7 +149,6 @@ }; mt6358_vcamio_reg: ldo_vcamio { - compatible = "regulator-fixed"; regulator-name = "vcamio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -168,7 +163,6 @@ }; mt6358_vcn18_reg: ldo_vcn18 { - compatible = "regulator-fixed"; regulator-name = "vcn18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -176,7 +170,6 @@ }; mt6358_vfe28_reg: ldo_vfe28 { - compatible = "regulator-fixed"; regulator-name = "vfe28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -193,7 +186,6 @@ }; mt6358_vcn28_reg: ldo_vcn28 { - compatible = "regulator-fixed"; regulator-name = "vcn28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -218,7 +210,6 @@ }; mt6358_vxo22_reg: ldo_vxo22 { - compatible = "regulator-fixed"; regulator-name = "vxo22"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; @@ -234,7 +225,6 @@ }; mt6358_vaux18_reg: ldo_vaux18 { - compatible = "regulator-fixed"; regulator-name = "vaux18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -249,7 +239,6 @@ }; mt6358_vbif28_reg: ldo_vbif28 { - compatible = "regulator-fixed"; regulator-name = "vbif28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -280,7 +269,6 @@ }; mt6358_vio28_reg: ldo_vio28 { - compatible = "regulator-fixed"; regulator-name = "vio28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -288,7 +276,6 @@ }; mt6358_va12_reg: ldo_va12 { - compatible = "regulator-fixed"; regulator-name = "va12"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -297,22 +284,14 @@ }; mt6358_vrf18_reg: ldo_vrf18 { - compatible = "regulator-fixed"; regulator-name = "vrf18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <120>; }; - mt6358_vcn33_bt_reg: ldo_vcn33_bt { - regulator-name = "vcn33_bt"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3500000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { - regulator-name = "vcn33_wifi"; + mt6358_vcn33_reg: ldo_vcn33 { + regulator-name = "vcn33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3500000>; regulator-enable-ramp-delay = <270>; @@ -340,7 +319,6 @@ }; mt6358_vaud28_reg: ldo_vaud28 { - compatible = "regulator-fixed"; regulator-name = "vaud28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 26cb3268cc..850b3e2773 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -154,8 +154,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 54 0>; ports { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 3ee9266fa8..917fa39a74 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -252,7 +252,7 @@ clock-names = "hif_sel"; }; - cir: cir@10009000 { + cir: ir-receiver@10009000 { compatible = "mediatek,mt7622-cir"; reg = <0 0x10009000 0 0x1000>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>; @@ -283,16 +283,14 @@ }; }; - apmixedsys: apmixedsys@10209000 { - compatible = "mediatek,mt7622-apmixedsys", - "syscon"; + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt7622-apmixedsys"; reg = <0 0x10209000 0 0x1000>; #clock-cells = <1>; }; - topckgen: topckgen@10210000 { - compatible = "mediatek,mt7622-topckgen", - "syscon"; + topckgen: clock-controller@10210000 { + compatible = "mediatek,mt7622-topckgen"; reg = <0 0x10210000 0 0x1000>; #clock-cells = <1>; }; @@ -515,7 +513,6 @@ <&pericfg CLK_PERI_AUXADC_PD>; clock-names = "therm", "auxadc"; resets = <&pericfg MT7622_PERI_THERM_SW_RST>; - reset-names = "therm"; mediatek,auxadc = <&auxadc>; mediatek,apmixedsys = <&apmixedsys>; nvmem-cells = <&thermal_calibration>; @@ -734,9 +731,8 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; }; - ssusbsys: ssusbsys@1a000000 { - compatible = "mediatek,mt7622-ssusbsys", - "syscon"; + ssusbsys: clock-controller@1a000000 { + compatible = "mediatek,mt7622-ssusbsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; @@ -793,9 +789,8 @@ }; }; - pciesys: pciesys@1a100800 { - compatible = "mediatek,mt7622-pciesys", - "syscon"; + pciesys: clock-controller@1a100800 { + compatible = "mediatek,mt7622-pciesys"; reg = <0 0x1a100800 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; @@ -921,12 +916,13 @@ }; }; - hifsys: syscon@1af00000 { - compatible = "mediatek,mt7622-hifsys", "syscon"; + hifsys: clock-controller@1af00000 { + compatible = "mediatek,mt7622-hifsys"; reg = <0 0x1af00000 0 0x70>; + #clock-cells = <1>; }; - ethsys: syscon@1b000000 { + ethsys: clock-controller@1b000000 { compatible = "mediatek,mt7622-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; @@ -966,9 +962,7 @@ }; eth: ethernet@1b100000 { - compatible = "mediatek,mt7622-eth", - "mediatek,mt2701-eth", - "syscon"; + compatible = "mediatek,mt7622-eth"; reg = <0 0x1b100000 0 0x20000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index e1ec2cccf4..ed79ad1ae8 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -146,19 +146,19 @@ &cpu_thermal { cooling-maps { - cpu-active-high { + map-cpu-active-high { /* active: set fan to cooling level 2 */ cooling-device = <&fan 2 2>; trip = <&cpu_trip_active_high>; }; - cpu-active-med { + map-cpu-active-med { /* active: set fan to cooling level 1 */ cooling-device = <&fan 1 1>; trip = <&cpu_trip_active_med>; }; - cpu-active-low { + map-cpu-active-low { /* active: set fan to cooling level 0 */ cooling-device = <&fan 0 0>; trip = <&cpu_trip_active_low>; @@ -205,8 +205,7 @@ reg = <31>; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index d974739eae..559990dcd1 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -16,49 +16,49 @@ #address-cells = <2>; #size-cells = <2>; - clk40m: oscillator-40m { - compatible = "fixed-clock"; - clock-frequency = <40000000>; - #clock-cells = <0>; - clock-output-names = "clkxtal"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; cpu1: cpu@1 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; cpu2: cpu@2 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; cpu3: cpu@3 { - device_type = "cpu"; - enable-method = "psci"; compatible = "arm,cortex-a53"; reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; #cooling-cells = <2>; }; }; + clk40m: oscillator-40m { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + clock-output-names = "clkxtal"; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -121,32 +121,23 @@ }; - timer { - compatible = "arm,armv8-timer"; - interrupt-parent = <&gic>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; - soc { - #address-cells = <2>; - #size-cells = <2>; compatible = "simple-bus"; ranges; + #address-cells = <2>; + #size-cells = <2>; gic: interrupt-controller@c000000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupt-controller; reg = <0 0x0c000000 0 0x10000>, /* GICD */ <0 0x0c080000 0 0x80000>, /* GICR */ <0 0x0c400000 0 0x2000>, /* GICC */ <0 0x0c410000 0 0x1000>, /* GICH */ <0 0x0c420000 0 0x2000>; /* GICV */ + interrupt-parent = <&gic>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; }; infracfg: infracfg@10001000 { @@ -203,6 +194,19 @@ #interrupt-cells = <2>; }; + pwm: pwm@10048000 { + compatible = "mediatek,mt7986-pwm"; + reg = <0 0x10048000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&infracfg CLK_INFRA_PWM_STA>, + <&infracfg CLK_INFRA_PWM1_CK>, + <&infracfg CLK_INFRA_PWM2_CK>; + clock-names = "top", "main", "pwm1", "pwm2"; + status = "disabled"; + }; + sgmiisys0: syscon@10060000 { compatible = "mediatek,mt7986-sgmiisys_0", "syscon"; @@ -240,19 +244,6 @@ status = "disabled"; }; - pwm: pwm@10048000 { - compatible = "mediatek,mt7986-pwm"; - reg = <0 0x10048000 0 0x1000>; - #pwm-cells = <2>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topckgen CLK_TOP_PWM_SEL>, - <&infracfg CLK_INFRA_PWM_STA>, - <&infracfg CLK_INFRA_PWM1_CK>, - <&infracfg CLK_INFRA_PWM2_CK>; - clock-names = "top", "main", "pwm1", "pwm2"; - status = "disabled"; - }; - uart0: serial@11002000 { compatible = "mediatek,mt7986-uart", "mediatek,mt6577-uart"; @@ -310,9 +301,9 @@ spi0: spi@1100a000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x1100a000 0 0x100>; #address-cells = <1>; #size-cells = <0>; - reg = <0 0x1100a000 0 0x100>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_MPLL_D2>, <&topckgen CLK_TOP_SPI_SEL>, @@ -324,9 +315,9 @@ spi1: spi@1100b000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x1100b000 0 0x100>; #address-cells = <1>; #size-cells = <0>; - reg = <0 0x1100b000 0 0x100>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_MPLL_D2>, <&topckgen CLK_TOP_SPIM_MST_SEL>, @@ -336,6 +327,20 @@ status = "disabled"; }; + thermal: thermal@1100c800 { + compatible = "mediatek,mt7986-thermal"; + reg = <0 0x1100c800 0 0x800>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_THERM_CK>, + <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "therm", "auxadc"; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + auxadc: adc@1100d000 { compatible = "mediatek,mt7986-auxadc"; reg = <0 0x1100d000 0 0x1000>; @@ -387,39 +392,23 @@ status = "disabled"; }; - thermal: thermal@1100c800 { - #thermal-sensor-cells = <1>; - compatible = "mediatek,mt7986-thermal"; - reg = <0 0x1100c800 0 0x800>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&infracfg CLK_INFRA_THERM_CK>, - <&infracfg CLK_INFRA_ADC_26M_CK>, - <&infracfg CLK_INFRA_ADC_FRC_CK>; - clock-names = "therm", "auxadc", "adc_32k"; - mediatek,auxadc = <&auxadc>; - mediatek,apmixedsys = <&apmixedsys>; - nvmem-cells = <&thermal_calibration>; - nvmem-cell-names = "calibration-data"; - }; - pcie: pcie@11280000 { compatible = "mediatek,mt7986-pcie", "mediatek,mt8192-pcie"; + reg = <0x00 0x11280000 0x00 0x4000>; + reg-names = "pcie-mac"; + ranges = <0x82000000 0x00 0x20000000 0x00 + 0x20000000 0x00 0x10000000>; device_type = "pci"; #address-cells = <3>; #size-cells = <2>; - reg = <0x00 0x11280000 0x00 0x4000>; - reg-names = "pcie-mac"; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0x00 0x20000000 0x00 - 0x20000000 0x00 0x10000000>; clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, <&infracfg CLK_INFRA_IPCIE_CK>, <&infracfg CLK_INFRA_IPCIER_CK>, <&infracfg CLK_INFRA_IPCIEB_CK>; clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m"; - status = "disabled"; phys = <&pcie_port PHY_TYPE_PCIE>; phy-names = "pcie-phy"; @@ -430,6 +419,8 @@ <0 0 0 2 &pcie_intc 1>, <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; + status = "disabled"; + pcie_intc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -440,9 +431,9 @@ pcie_phy: t-phy { compatible = "mediatek,mt7986-tphy", "mediatek,generic-tphy-v2"; + ranges; #address-cells = <2>; #size-cells = <2>; - ranges; status = "disabled"; pcie_port: pcie-phy@11c00000 { @@ -467,9 +458,9 @@ usb_phy: t-phy@11e10000 { compatible = "mediatek,mt7986-tphy", "mediatek,generic-tphy-v2"; + ranges = <0 0 0x11e10000 0x1700>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x11e10000 0x1700>; status = "disabled"; u2port0: usb-phy@0 { @@ -497,8 +488,6 @@ }; ethsys: syscon@15000000 { - #address-cells = <1>; - #size-cells = <1>; compatible = "mediatek,mt7986-ethsys", "syscon"; reg = <0 0x15000000 0 0x1000>; @@ -532,20 +521,6 @@ mediatek,wo-ccif = <&wo_ccif1>; }; - wo_ccif0: syscon@151a5000 { - compatible = "mediatek,mt7986-wo-ccif", "syscon"; - reg = <0 0x151a5000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; - }; - - wo_ccif1: syscon@151ad000 { - compatible = "mediatek,mt7986-wo-ccif", "syscon"; - reg = <0 0x151ad000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; - }; - eth: ethernet@15100000 { compatible = "mediatek,mt7986-eth"; reg = <0 0x15100000 0 0x80000>; @@ -578,26 +553,39 @@ <&topckgen CLK_TOP_SGM_325M_SEL>; assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, <&apmixedsys CLK_APMIXED_SGMPLL>; + #address-cells = <1>; + #size-cells = <0>; mediatek,ethsys = <ðsys>; mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; mediatek,wed-pcie = <&wed_pcie>; mediatek,wed = <&wed0>, <&wed1>; - #reset-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; + wo_ccif0: syscon@151a5000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151a5000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + }; + + wo_ccif1: syscon@151ad000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151ad000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + }; + wifi: wifi@18000000 { compatible = "mediatek,mt7986-wmac"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; reset-names = "consys"; clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>, <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; clock-names = "mcu", "ap2conn"; - reg = <0 0x18000000 0 0x1000000>, - <0 0x10003000 0 0x1000>, - <0 0x11d10000 0 0x1000>; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, @@ -645,4 +633,13 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi index bdcd35ceca..90cbbc18a4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -13,8 +13,7 @@ touchscreen2: touchscreen@34 { compatible = "melfas,mip4_ts"; reg = <0x34>; - interrupt-parent = <&pio>; - interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; /* @@ -26,8 +25,7 @@ compatible = "hid-over-i2c"; reg = <0x20>; hid-descr-addr = <0x0020>; - interrupt-parent = <&pio>; - interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -39,8 +37,7 @@ */ trackpad2: trackpad@2c { compatible = "hid-over-i2c"; - interrupt-parent = <&pio>; - interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; reg = <0x2c>; hid-descr-addr = <0x0020>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 111495622c..8d614ac2c5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -245,8 +245,7 @@ reg = <0x1a>; avdd-supply = <&mt6397_vgp1_reg>; cpvdd-supply = <&mt6397_vcama_reg>; - interrupt-parent = <&pio>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>; pinctrl-names = "default"; pinctrl-0 = <&rt5650_irq>; #sound-dai-cells = <1>; @@ -308,8 +307,7 @@ da9211: da9211@68 { compatible = "dlg,da9211"; reg = <0x68>; - interrupt-parent = <&pio>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; regulators { da9211_vcpu_reg: BUCKA { @@ -353,8 +351,7 @@ touchscreen: touchscreen@10 { compatible = "elan,ekth3500"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -366,8 +363,7 @@ trackpad: trackpad@15 { compatible = "elan,ekth3000"; - interrupt-parent = <&pio>; - interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; reg = <0x15>; vcc-supply = <&mt6397_vgp6_reg>; wakeup-source; @@ -439,8 +435,7 @@ btmrvl: btmrvl@2 { compatible = "marvell,sd8897-bt"; reg = <2>; - interrupt-parent = <&pio>; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>; marvell,wakeup-pin = /bits/ 16 <0x0d>; marvell,wakeup-gap-ms = /bits/ 16 <0x64>; }; @@ -448,8 +443,7 @@ mwifiex: mwifiex@1 { compatible = "marvell,sd8897"; reg = <1>; - interrupt-parent = <&pio>; - interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>; marvell,wakeup-pin = <3>; }; }; @@ -933,8 +927,7 @@ compatible = "mediatek,mt6397"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -1160,8 +1153,7 @@ compatible = "google,cros-ec-spi"; reg = <0x0>; spi-max-frequency = <12000000>; - interrupt-parent = <&pio>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>; google,cros-ec-spi-msg-delay = <500>; i2c_tunnel: i2c-tunnel0 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index d258c80213..0e5c628d1e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -303,8 +303,7 @@ pmic: pmic { compatible = "mediatek,mt6397"; - interrupt-parent = <&pio>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index c47d7d900f..cac4cd0a03 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -1368,10 +1368,9 @@ #clock-cells = <1>; }; - vcodec_dec: vcodec@16000000 { + vcodec_dec: vcodec@16020000 { compatible = "mediatek,mt8173-vcodec-dec"; - reg = <0 0x16000000 0 0x100>, /* VDEC_SYS */ - <0 0x16020000 0 0x1000>, /* VDEC_MISC */ + reg = <0 0x16020000 0 0x1000>, /* VDEC_MISC */ <0 0x16021000 0 0x800>, /* VDEC_LD */ <0 0x16021800 0 0x800>, /* VDEC_TOP */ <0 0x16022000 0 0x1000>, /* VDEC_CM */ @@ -1382,6 +1381,8 @@ <0 0x16027000 0 0x800>, /* VDEC_HWQ */ <0 0x16027800 0 0x800>, /* VDEC_HWB */ <0 0x16028400 0 0x400>; /* VDEC_HWG */ + reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp", + "hwd", "hwq", "hwb", "hwg"; interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, <&iommu M4U_PORT_HW_VDEC_PP_EXT>, @@ -1392,6 +1393,7 @@ <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; mediatek,vpu = <&vpu>; + mediatek,vdecsys = <&vdecsys>; power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>; clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, <&topckgen CLK_TOP_UNIVPLL_D2>, diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 77f9ab94c0..681deddffc 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -381,6 +381,10 @@ }; }; +&pmic { + interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>; +}; + &mfg { domain-supply = <&mt6358_vgpu_reg>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi index 2c69e7658d..8b57706ac8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi @@ -11,8 +11,7 @@ pinctrl-0 = <&da7219_pins>; compatible = "dlg,da7219"; reg = <0x1a>; - interrupt-parent = <&pio>; - interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>; + interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>; dlg,micbias-lvl = <2600>; dlg,mic-amp-in-sel = "diff"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi index 0799c48ade..548e22c194 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi @@ -11,8 +11,7 @@ pinctrl-0 = <&ts3a227e_pins>; compatible = "ti,ts3a227e"; reg = <0x3b>; - interrupt-parent = <&pio>; - interrupts = <157 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>; status = "okay"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts index 552bfc7269..0b45aee2e2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -18,8 +18,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts index 77b96ddf64..b595622e7b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts @@ -30,8 +30,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts index 37e6e58f63..5a1c39318a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts @@ -17,8 +17,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts index 0e09604004..3ea4fdb401 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts @@ -17,8 +17,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts new file mode 100644 index 0000000000..4eb2a0d571 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" + +/ { + model = "Google makomo sku0 board"; + chassis-type = "laptop"; + compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL14"; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts new file mode 100644 index 0000000000..6a733361e8 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" +#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi" + +/ { + model = "Google makomo sku1 board"; + chassis-type = "laptop"; + compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL14"; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts new file mode 100644 index 0000000000..8ce9568fee --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" + +/ { + model = "Google pico board"; + chassis-type = "convertible"; + compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183"; +}; + +&i2c_tunnel { + google,remote-bus = <0>; +}; + +&i2c2 { + i2c-scl-internal-delay-ns = <25000>; + + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts new file mode 100644 index 0000000000..a2e74b8293 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" + +/ { + model = "Google pico6 board"; + chassis-type = "convertible"; + compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183"; + + bt_wakeup: bt-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins_wakeup>; + + wobt { + label = "Wake on BT"; + gpios = <&pio 42 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; +}; + +&i2c_tunnel { + google,remote-bus = <0>; +}; + +&i2c2 { + i2c-scl-internal-delay-ns = <25000>; + + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&wifi_wakeup { + wowlan { + gpios = <&pio 113 GPIO_ACTIVE_LOW>; + }; +}; + +&wifi_pwrseq { + post-power-on-delay-ms = <50>; + + /* Toggle WIFI_ENABLE to reset the chip. */ + reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>; +}; + +&wifi_pins_pwrseq { + pins-wifi-enable { + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; + }; +}; + +&mmc1_pins_default { + pins-cmd-dat { + drive-strength = <MTK_DRIVE_6mA>; + }; + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; + +&mmc1 { + bt_reset: bt-reset { + compatible = "mediatek,mt7921s-bluetooth"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins_reset>; + reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>; + }; +}; + +&pio { + bt_pins_wakeup: bt-pins-wakeup { + piins-bt-wakeup { + pinmux = <PINMUX_GPIO42__FUNC_GPIO42>; + input-enable; + }; + }; + + bt_pins_reset: bt-pins-reset { + pins-bt-reset { + pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; + output-high; + }; + }; +}; + +/delete-node/ &bluetooth; +/delete-node/ &bt_pins; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 820260348d..7592e3b860 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -149,7 +149,6 @@ reg = <0x58>; pinctrl-names = "default"; pinctrl-0 = <&anx7625_pins>; - panel_flags = <1>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; vdd10-supply = <&pp1200_mipibrdg>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts index fcce8ea123..1ecf39458d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts @@ -14,6 +14,24 @@ "google,kakadu", "mediatek,mt8183"; }; +&i2c0 { + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&panel { + compatible = "boe,tv105wum-nw0"; +}; + &sound { compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts index ebfabba725..ba74109a49 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -13,3 +13,21 @@ compatible = "google,kakadu-rev3", "google,kakadu-rev2", "google,kakadu", "mediatek,mt8183"; }; + +&i2c0 { + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&panel { + compatible = "boe,tv105wum-nw0"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi index 0d3c7b8162..bfb9e42c8a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -63,19 +63,6 @@ &i2c0 { status = "okay"; - - touchscreen: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&open_touch>; - - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_EDGE_FALLING>; - - post-power-on-delay-ms = <10>; - hid-descr-addr = <0x0001>; - }; }; &mt6358_vcama2_reg { @@ -388,5 +375,5 @@ &panel { status = "okay"; - compatible = "boe,tv105wum-nw0"; + /* compatible will be set in board dts */ }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts new file mode 100644 index 0000000000..05361008e8 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" + +/ { + model = "Google katsu board"; + chassis-type = "tablet"; + compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183"; +}; + +&i2c0 { + touchscreen1: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>; + vdd-supply = <&lcd_pp3300>; + }; +}; + +&panel { + compatible = "starry,2081101qfh032011-53g"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KATSU"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts new file mode 100644 index 0000000000..cf008ed828 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-rt1015p.dtsi" + +/ { + model = "Google katsu sku38 board"; + chassis-type = "tablet"; + compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183"; +}; + +&i2c0 { + touchscreen1: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>; + vdd-supply = <&lcd_pp3300>; + }; +}; + +&panel { + compatible = "starry,2081101qfh032011-53g"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KATSU"; +}; + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi index e73113cb51..5c1bf6a1e4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -48,8 +48,7 @@ touchscreen: touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touch_default>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi index 181da69d18..0f5fa893a7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -54,8 +54,7 @@ pinctrl-names = "default"; pinctrl-0 = <&open_touch>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>; post-power-on-delay-ms = <10>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 49a1c3ccb0..41aef6c3ed 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -433,7 +433,6 @@ }; &mt6358_vgpu_reg { - regulator-min-microvolt = <625000>; regulator-max-microvolt = <900000>; regulator-coupled-with = <&mt6358_vsram_gpu_reg>; @@ -846,6 +845,10 @@ }; }; +&pmic { + interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>; +}; + &pwm0 { status = "okay"; pinctrl-names = "default"; @@ -884,14 +887,13 @@ status = "okay"; cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>; - cr50@0 { + tpm@0 { compatible = "google,cr50"; reg = <0>; spi-max-frequency = <1000000>; pinctrl-names = "default"; pinctrl-0 = <&h1_int_od_l>; - interrupt-parent = <&pio>; - interrupts = <153 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>; }; }; @@ -918,8 +920,7 @@ compatible = "google,cros-ec-spi"; reg = <0>; spi-max-frequency = <3000000>; - interrupt-parent = <&pio>; - interrupts = <151 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_odl>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index b5784a60c3..76449b4cf2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -370,6 +370,10 @@ }; }; +&pmic { + interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>; +}; + &mfg { domain-supply = <&mt6358_vgpu_reg>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index df6e9990cd..e1767a4e38 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1183,22 +1183,10 @@ status = "disabled"; }; - svs: svs@1100b000 { - compatible = "mediatek,mt8183-svs"; - reg = <0 0x1100b000 0 0x1000>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_THERM>; - clock-names = "main"; - nvmem-cells = <&svs_calibration>, - <&thermal_calibration>; - nvmem-cell-names = "svs-calibration-data", - "t-calibration-data"; - }; - thermal: thermal@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal"; - reg = <0 0x1100b000 0 0x1000>; + reg = <0 0x1100b000 0 0xc00>; clocks = <&infracfg CLK_INFRA_THERM>, <&infracfg CLK_INFRA_AUXADC>; clock-names = "therm", "auxadc"; @@ -1210,6 +1198,18 @@ nvmem-cell-names = "calibration-data"; }; + svs: svs@1100bc00 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1628,6 +1628,7 @@ compatible = "mediatek,mt8183-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>; #clock-cells = <1>; + power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>; }; gpu: gpu@13040000 { @@ -1900,6 +1901,36 @@ #clock-cells = <1>; }; + vcodec_dec: video-codec@16020000 { + compatible = "mediatek,mt8183-vcodec-dec"; + reg = <0 0x16020000 0 0x1000>, /* VDEC_MISC */ + <0 0x16021000 0 0x800>, /* VDEC_VLD */ + <0 0x16021800 0 0x800>, /* VDEC_TOP */ + <0 0x16022000 0 0x1000>, /* VDEC_MC */ + <0 0x16023000 0 0x1000>, /* VDEC_AVCVLD */ + <0 0x16024000 0 0x1000>, /* VDEC_AVCMV */ + <0 0x16025000 0 0x1000>, /* VDEC_PP */ + <0 0x16026800 0 0x800>, /* VP8_VD */ + <0 0x16027000 0 0x800>, /* VP6_VD */ + <0 0x16027800 0 0x800>, /* VP8_VL */ + <0 0x16028400 0 0x400>; /* VP9_VD */ + reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp", + "hwd", "hwq", "hwb", "hwg"; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>; + mediatek,scp = <&scp>; + mediatek,vdecsys = <&vdecsys>; + power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_VDEC>; + clock-names = "vdec"; + }; + larb1: larb@16010000 { compatible = "mediatek,mt8183-smi-larb"; reg = <0 0x16010000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts new file mode 100644 index 0000000000..68a82b49f7 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + */ +/dts-v1/; +#include "mt8188.dtsi" +#include "mt6359.dtsi" + +/ { + model = "MediaTek MT8188 evaluation board"; + compatible = "mediatek,mt8188-evb", "mediatek,mt8188"; + + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mmc0 { + bus-width = <8>; + hs400-ds-delay = <0x1481b>; + max-frequency = <200000000>; + + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + non-removable; + + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + + status = "okay"; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; +}; + +&pio { + adsp_uart_pins: adsp-uart-pins { + pins-tx-rx { + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>, + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, + <PINMUX_GPIO55__FUNC_B1_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, + <PINMUX_GPIO59__FUNC_B1_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, + <PINMUX_GPIO61__FUNC_B1_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, + <PINMUX_GPIO63__FUNC_B1_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c5_pins: i2c5-pins { + pins-bus { + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, + <PINMUX_GPIO65__FUNC_B1_SCL5>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c6_pins: i2c6-pins { + pins-bus { + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, + <PINMUX_GPIO67__FUNC_B1_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk-ds { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>, + <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-pins { + pins-io-ck { + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>, + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>, + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>; + bias-pull-down; + }; + + pins-io-cs { + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>, + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>, + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>; + bias-pull-up; + }; + }; + + spi0_pins: spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; + bias-disable; + }; + }; + + spi1_pins: spi1-pins { + pins-spi { + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; + bias-disable; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + pins-rx-tx { + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, + <PINMUX_GPIO32__FUNC_I1_URXD0>; + bias-pull-up; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem_reserved>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi new file mode 100644 index 0000000000..b4315c9214 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -0,0 +1,956 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2023 MediaTek Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/clock/mediatek,mt8188-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> +#include <dt-bindings/power/mediatek,mt8188-power.h> + +/ { + compatible = "mediatek,mt8188"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2600000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2600000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + + core6 { + cpu = <&cpu6>; + }; + + core7 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010000>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <95>; + min-residency-us = <580>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010000>; + local-timer-stop; + entry-latency-us = <45>; + exit-latency-us = <140>; + min-residency-us = <740>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010010>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <155>; + min-residency-us = <840>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010010>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <200>; + min-residency-us = <1000>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_0>; + cache-unified; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-size = <262144>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_0>; + cache-unified; + }; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-unified; + }; + }; + + clk13m: oscillator-13m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "clk13m"; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clock-frequency = <13000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8188-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8188-infracfg-ao", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8188-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8188-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c00000 0 0x1000>, + <0 0x11e10000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_lt", + "iocfg_lm", "iocfg_rt", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 176>; + interrupt-controller; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8188-wdt"; + reg = <0 0x10007000 0 0x100>; + mediatek,disable-extrst; + #reset-cells = <1>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8188-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk13m>; + }; + + pwrap: pwrap@10024000 { + compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon"; + reg = <0 0x10024000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + }; + + scp: scp@10500000 { + compatible = "mediatek,mt8188-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>; + reg-names = "sram", "cfg"; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + adsp_audio26m: clock-controller@10b91100 { + compatible = "mediatek,mt8188-adsp-audio26m"; + reg = <0 0x10b91100 0 0x100>; + #clock-cells = <1>; + }; + + uart0: serial@11001100 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001100 0 0x100>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11001200 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001200 0 0x100>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11001300 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001300 0 0x100>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11001400 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001400 0 0x100>; + interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + auxadc: adc@11002000 { + compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pericfg_ao: syscon@11003000 { + compatible = "mediatek,mt8188-pericfg-ao", "syscon"; + reg = <0 0x11003000 0 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + xhci1: usb@11200000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port1 PHY_TYPE_USB2>, + <&u3port1 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, + <&topckgen CLK_TOP_SSUSB_XHCI>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + mediatek,syscon-wakeup = <&pericfg 0x468 2>; + wakeup-source; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x10000>, + <0 0x11f50000 0 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>, + <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>; + clock-names = "source", "hclk", "source_cg", "crypto_clk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11eb0000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + i2c0: i2c@11280000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11280000 0 0x1000>, + <0 0x10220080 0 0x80>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11281000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11281000 0 0x1000>, + <0 0x10220180 0 0x80>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11282000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11282000 0 0x1000>, + <0 0x10220280 0 0x80>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_c: clock-controller@11283000 { + compatible = "mediatek,mt8188-imp-iic-wrap-c"; + reg = <0 0x11283000 0 0x1000>; + #clock-cells = <1>; + }; + + xhci2: usb@112a0000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x112a0000 0 0x1000>, + <0 0x112a3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port2 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>, + <&topckgen CLK_TOP_USB_TOP_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + status = "disabled"; + }; + + xhci0: usb@112b0000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x112b0000 0 0x1000>, + <0 0x112b3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port0 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>, + <&topckgen CLK_TOP_USB_TOP_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + mediatek,syscon-wakeup = <&pericfg 0x460 2>; + wakeup-source; + status = "disabled"; + }; + + nor_flash: spi@1132c000 { + compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor"; + reg = <0 0x1132c000 0 0x1000>; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>; + clock-names = "spi", "sf", "axi"; + assigned-clocks = <&topckgen CLK_TOP_SPINOR>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + + i2c1: i2c@11e00000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11e00000 0 0x1000>, + <0 0x10220100 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11e01000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11e01000 0 0x1000>, + <0 0x10220380 0 0x80>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_w: clock-controller@11e02000 { + compatible = "mediatek,mt8188-imp-iic-wrap-w"; + reg = <0 0x11e02000 0 0x1000>; + #clock-cells = <1>; + }; + + u3phy0: t-phy@11e30000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e30000 0x1000>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + u3phy1: t-phy@11e40000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e40000 0x1000>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + status = "disabled"; + }; + }; + + u3phy2: t-phy@11e80000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e80000 0x1000>; + status = "disabled"; + + u2port2: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + i2c5: i2c@11ec0000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11ec0000 0 0x1000>, + <0 0x10220480 0 0x80>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@11ec1000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11ec1000 0 0x1000>, + <0 0x10220600 0 0x80>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_en: clock-controller@11ec2000 { + compatible = "mediatek,mt8188-imp-iic-wrap-en"; + reg = <0 0x11ec2000 0 0x1000>; + #clock-cells = <1>; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8188-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + vppsys0: clock-controller@14000000 { + compatible = "mediatek,mt8188-vppsys0"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys: clock-controller@14e00000 { + compatible = "mediatek,mt8188-wpesys"; + reg = <0 0x14e00000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp0: clock-controller@14e02000 { + compatible = "mediatek,mt8188-wpesys-vpp0"; + reg = <0 0x14e02000 0 0x1000>; + #clock-cells = <1>; + }; + + vppsys1: clock-controller@14f00000 { + compatible = "mediatek,mt8188-vppsys1"; + reg = <0 0x14f00000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8188-imgsys"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_top: clock-controller@15110000 { + compatible = "mediatek,mt8188-imgsys1-dip-top"; + reg = <0 0x15110000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_nr: clock-controller@15130000 { + compatible = "mediatek,mt8188-imgsys1-dip-nr"; + reg = <0 0x15130000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe1: clock-controller@15220000 { + compatible = "mediatek,mt8188-imgsys-wpe1"; + reg = <0 0x15220000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@15330000 { + compatible = "mediatek,mt8188-ipesys"; + reg = <0 0x15330000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe2: clock-controller@15520000 { + compatible = "mediatek,mt8188-imgsys-wpe2"; + reg = <0 0x15520000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe3: clock-controller@15620000 { + compatible = "mediatek,mt8188-imgsys-wpe3"; + reg = <0 0x15620000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@16000000 { + compatible = "mediatek,mt8188-camsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1604f000 { + compatible = "mediatek,mt8188-camsys-rawa"; + reg = <0 0x1604f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuva: clock-controller@1606f000 { + compatible = "mediatek,mt8188-camsys-yuva"; + reg = <0 0x1606f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1608f000 { + compatible = "mediatek,mt8188-camsys-rawb"; + reg = <0 0x1608f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuvb: clock-controller@160af000 { + compatible = "mediatek,mt8188-camsys-yuvb"; + reg = <0 0x160af000 0 0x1000>; + #clock-cells = <1>; + }; + + ccusys: clock-controller@17200000 { + compatible = "mediatek,mt8188-ccusys"; + reg = <0 0x17200000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1800f000 { + compatible = "mediatek,mt8188-vdecsys-soc"; + reg = <0 0x1800f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1802f000 { + compatible = "mediatek,mt8188-vdecsys"; + reg = <0 0x1802f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@1a000000 { + compatible = "mediatek,mt8188-vencsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 02ce05bc15..f62b2498eb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -1398,7 +1398,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi5_pins>; - cr50@0 { + tpm@0 { compatible = "google,cr50"; reg = <0>; interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>; @@ -1420,7 +1420,7 @@ mt6315_6_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; @@ -1430,7 +1430,7 @@ mt6315_6_vbuck3: vbuck3 { regulator-compatible = "vbuck3"; regulator-name = "Vlcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; @@ -1447,7 +1447,7 @@ mt6315_7_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; - regulator-min-microvolt = <606250>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <800000>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index f1fc14e53f..eea8d141f9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt8192-power.h> #include <dt-bindings/reset/mt8192-resets.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h> / { compatible = "mediatek,mt8192"; @@ -72,6 +74,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu1: cpu@100 { @@ -90,6 +93,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu2: cpu@200 { @@ -108,6 +112,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu3: cpu@300 { @@ -126,6 +131,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu4: cpu@400 { @@ -144,6 +150,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu5: cpu@500 { @@ -162,6 +169,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu6: cpu@600 { @@ -180,6 +188,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu7: cpu@700 { @@ -198,6 +207,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu-map { @@ -788,6 +798,29 @@ status = "disabled"; }; + lvts_ap: thermal-sensor@1100b000 { + compatible = "mediatek,mt8192-lvts-ap"; + reg = <0 0x1100b000 0 0xc00>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>; + nvmem-cells = <&lvts_e_data1>; + nvmem-cell-names = "lvts-calib-data-1"; + #thermal-sensor-cells = <1>; + }; + + svs: svs@1100bc00 { + compatible = "mediatek,mt8192-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&lvts_e_data1>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>; + reset-names = "svs_rst"; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1114,6 +1147,17 @@ status = "disabled"; }; + lvts_mcu: thermal-sensor@11278000 { + compatible = "mediatek,mt8192-lvts-mcu"; + reg = <0 0x11278000 0 0x1000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>; + nvmem-cells = <&lvts_e_data1>; + nvmem-cell-names = "lvts-calib-data-1"; + #thermal-sensor-cells = <1>; + }; + efuse: efuse@11c10000 { compatible = "mediatek,mt8192-efuse", "mediatek,efuse"; reg = <0 0x11c10000 0 0x1000>; @@ -1412,6 +1456,7 @@ reg = <0 0x14001000 0 0x1000>; interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&mmsys CLK_MM_DISP_MUTEX0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>, <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>; power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; @@ -1899,4 +1944,426 @@ power-domains = <&spm MT8192_POWER_DOMAIN_MDP>; }; }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>; + + trips { + cpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>; + + trips { + cpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>; + + trips { + cpu2_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>; + + trips { + cpu3_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>; + + trips { + cpu4_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>; + + trips { + cpu5_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>; + + trips { + cpu6_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>; + + trips { + cpu7_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + vpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_VPU0>; + + trips { + vpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_VPU1>; + + trips { + vpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_GPU0>; + + trips { + gpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_GPU1>; + + trips { + gpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + infra-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_INFRA>; + + trips { + infra_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + infra_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cam-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_CAM>; + + trips { + cam_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + md0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_MD0>; + + trips { + md0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + md1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_MD1>; + + trips { + md1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + md2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_MD2>; + + trips { + md2_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md2_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 5a7cab489f..121dfd91da 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -127,6 +127,77 @@ regulator-boot-on; }; + /* Murata NCP03WF104F05RL */ + tboard_thermistor1: thermal-sensor-t1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-10000) 1553 + (-5000) 1485 + 0 1406 + 5000 1317 + 10000 1219 + 15000 1115 + 20000 1007 + 25000 900 + 30000 796 + 35000 697 + 40000 605 + 45000 523 + 50000 449 + 55000 384 + 60000 327 + 65000 279 + 70000 237 + 75000 202 + 80000 172 + 85000 147 + 90000 125 + 95000 107 + 100000 92 + 105000 79 + 110000 68 + 115000 59 + 120000 51 + 125000 44>; + }; + + tboard_thermistor2: thermal-sensor-t2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-10000) 1553 + (-5000) 1485 + 0 1406 + 5000 1317 + 10000 1219 + 15000 1115 + 20000 1007 + 25000 900 + 30000 796 + 35000 697 + 40000 605 + 45000 523 + 50000 449 + 55000 384 + 60000 327 + 65000 279 + 70000 237 + 75000 202 + 80000 172 + 85000 147 + 90000 125 + 95000 107 + 100000 92 + 105000 79 + 110000 68 + 115000 59 + 120000 51 + 125000 44>; + }; + usb_vbus: regulator-5v0-usb-vbus { compatible = "regulator-fixed"; regulator-name = "usb-vbus"; @@ -189,6 +260,42 @@ memory-region = <&afe_mem>; }; +&auxadc { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + &dp_intf0 { status = "okay"; @@ -401,6 +508,14 @@ }; }; +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + &mmc0 { status = "okay"; @@ -471,7 +586,6 @@ /* for GPU SRAM */ &mt6359_vsram_others_ldo_reg { - regulator-always-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; }; @@ -1131,7 +1245,7 @@ mt6315_6_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-ramp-delay = <6250>; @@ -1149,12 +1263,41 @@ mt6315_7_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; - regulator-min-microvolt = <625000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-ramp-delay = <6250>; regulator-allowed-modes = <0 1 2>; - regulator-always-on; + }; + }; + }; +}; + +&thermal_zones { + soc-area-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tboard_thermistor1>; + + trips { + trip-crit { + temperature = <84000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pmic-area-thermal { + polling-delay = <1000>; + polling-delay-passive = <0>; + thermal-sensors = <&tboard_thermistor2>; + + trips { + trip-crit { + temperature = <84000>; + hysteresis = <1000>; + type = "critical"; }; }; }; @@ -1183,6 +1326,7 @@ &xhci0 { status = "okay"; + rx-fifo-depth = <3072>; vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; @@ -1190,6 +1334,7 @@ &xhci1 { status = "okay"; + rx-fifo-depth = <3072>; vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 6708c4d21a..4dd7f75563 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -538,7 +538,7 @@ #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8195_POWER_DOMAIN_MFG1 { + mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 { reg = <MT8195_POWER_DOMAIN_MFG1>; clocks = <&apmixedsys CLK_APMIXED_MFGPLL>, <&topckgen CLK_TOP_MFG_CORE_TMP>; @@ -1119,7 +1119,7 @@ lvts_ap: thermal-sensor@1100b000 { compatible = "mediatek,mt8195-lvts-ap"; - reg = <0 0x1100b000 0 0x1000>; + reg = <0 0x1100b000 0 0xc00>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>; @@ -1128,6 +1128,18 @@ #thermal-sensor-cells = <1>; }; + svs: svs@1100bc00 { + compatible = "mediatek,mt8195-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calib_data &lvts_efuse_data1>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>; + reset-names = "svs_rst"; + }; + disp_pwm0: pwm@1100e000 { compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1686,6 +1698,9 @@ lvts_efuse_data2: lvts2-calib@1d0 { reg = <0x1d0 0x38>; }; + svs_calib_data: svs-calib@580 { + reg = <0x580 0x64>; + }; }; u3phy2: t-phy@11c40000 { @@ -1718,6 +1733,26 @@ }; }; + mipi_tx0: dsi-phy@11c80000 { + compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx"; + reg = <0 0x11c80000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + mipi_tx1: dsi-phy@11c90000 { + compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx"; + reg = <0 0x11c90000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx1_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + i2c5: i2c@11d00000 { compatible = "mediatek,mt8195-i2c", "mediatek,mt8192-i2c"; @@ -1963,6 +1998,116 @@ compatible = "mediatek,mt8195-vppsys0", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>; + }; + + dma-controller@14001000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14001000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>; + clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>; + mboxes = <&gce1 12 CMDQ_THR_PRIO_1>, + <&gce1 13 CMDQ_THR_PRIO_1>, + <&gce1 14 CMDQ_THR_PRIO_1>, + <&gce1 21 CMDQ_THR_PRIO_1>, + <&gce1 22 CMDQ_THR_PRIO_1>; + #dma-cells = <1>; + }; + + display@14002000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14002000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_FG>; + }; + + display@14003000 { + compatible = "mediatek,mt8195-mdp3-stitch"; + reg = <0 0x14003000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_STITCH>; + }; + + display@14004000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14004000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_HDR>; + }; + + display@14005000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14005000 0 0x1000>; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + display@14006000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14006000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>, + <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>; + }; + + display@14007000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14007000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>; + }; + + display@14008000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14008000 0 0x1000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + display@14009000 { + compatible = "mediatek,mt8195-mdp3-ovl"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_OVL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>; + }; + + display@1400a000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x1400a000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_PADDING>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + display@1400b000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0 0x1400b000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TCC>; + }; + + dma-controller@1400c000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x1400c000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>; + clocks = <&vppsys0 CLK_VPP0_MDP_WROT>; + iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + #dma-cells = <1>; }; mutex@1400f000 { @@ -2077,6 +2222,7 @@ compatible = "mediatek,mt8195-vppsys1", "syscon"; reg = <0 0x14f00000 0 0x1000>; #clock-cells = <1>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>; }; mutex@14f01000 { @@ -2112,6 +2258,289 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; }; + display@14f06000 { + compatible = "mediatek,mt8195-mdp3-split"; + reg = <0 0x14f06000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>, + <&vppsys1 CLK_VPP1_HDMI_META>, + <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f07000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0 0x14f07000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>; + }; + + dma-controller@14f08000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14f08000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f09000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14f09000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f0a000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14f0a000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>; + iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + display@14f0b000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14f0b000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>; + }; + + display@14f0c000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14f0c000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>; + }; + + display@14f0d000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14f0d000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>; + }; + + display@14f0e000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14f0e000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>; + }; + + display@14f0f000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14f0f000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>; + }; + + display@14f10000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14f10000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>; + }; + + display@14f11000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14f11000 0 0x1000>; + interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f12000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14f12000 0 0x1000>; + interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f13000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14f13000 0 0x1000>; + interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f14000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14f14000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>, + <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>; + }; + + display@14f15000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14f15000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>, + <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>; + }; + + display@14f16000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14f16000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>, + <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>; + }; + + display@14f17000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14f17000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>; + }; + + display@14f18000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14f18000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>; + }; + + display@14f19000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14f19000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>; + }; + + display@14f1a000 { + compatible = "mediatek,mt8195-mdp3-merge"; + reg = <0 0x14f1a000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1b000 { + compatible = "mediatek,mt8195-mdp3-merge"; + reg = <0 0x14f1b000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1c000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14f1c000 0 0x1000>; + interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1d000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14f1d000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>; + interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1e000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14f1e000 0 0x1000>; + interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1f000 { + compatible = "mediatek,mt8195-mdp3-ovl"; + reg = <0 0x14f1f000 0 0x1000>; + interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>; + }; + + display@14f20000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x14f20000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f21000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x14f21000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f22000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x14f22000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + dma-controller@14f23000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14f23000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f24000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14f24000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f25000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14f25000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>; + iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + imgsys: clock-controller@15000000 { compatible = "mediatek,mt8195-imgsys"; reg = <0 0x15000000 0 0x1000>; @@ -2623,6 +3052,7 @@ reg = <0 0x1c01a000 0 0x1000>; mboxes = <&gce0 0 CMDQ_THR_PRIO_4>; #clock-cells = <1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>; }; @@ -2741,6 +3171,20 @@ mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>; }; + dsi0: dsi@1c008000 { + compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi"; + reg = <0 0x1c008000 0 0x1000>; + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSI0>, + <&vdosys0 CLK_VDO0_DSI0_DSI>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + }; + dsc0: dsc@1c009000 { compatible = "mediatek,mt8195-disp-dsc"; reg = <0 0x1c009000 0 0x1000>; @@ -2750,6 +3194,20 @@ mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>; }; + dsi1: dsi@1c012000 { + compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi"; + reg = <0 0x1c012000 0 0x1000>; + interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSI1>, + <&vdosys0 CLK_VDO0_DSI1_DSI>, + <&mipi_tx1>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx1>; + phy-names = "dphy"; + status = "disabled"; + }; + merge0: merge@1c014000 { compatible = "mediatek,mt8195-disp-merge"; reg = <0 0x1c014000 0 0x1000>; @@ -2776,6 +3234,7 @@ interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>; power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>; }; @@ -2846,6 +3305,7 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>; clock-names = "vdo1_mutex"; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index 00ac59a873..7fc515a07c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -210,8 +210,7 @@ touchscreen@5d { compatible = "goodix,gt9271"; reg = <0x5d>; - interrupt-parent = <&pio>; - interrupts = <132 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; AVDD28-supply = <&mt6360_ldo1>; @@ -774,8 +773,7 @@ }; &pmic { - interrupt-parent = <&pio>; - interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; }; &scp { diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index 3f16595d09..d1bd328892 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -1459,7 +1459,7 @@ <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>; interconnect-names = "dma-mem", "write"; iommus = <&smmu_niso0 TEGRA234_SID_MGBE>; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>; status = "disabled"; }; @@ -1493,7 +1493,7 @@ <&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>; interconnect-names = "dma-mem", "write"; iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>; status = "disabled"; }; @@ -1527,7 +1527,7 @@ <&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>; interconnect-names = "dma-mem", "write"; iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>; - power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d6cb840b70..39889d5f8e 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb @@ -87,8 +88,10 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb @@ -220,6 +223,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-pipa.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb @@ -231,3 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts index e636a1cb9b..8460b538eb 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts @@ -67,6 +67,18 @@ }; }; +&usb { + status = "okay"; +}; + +&usb_dwc { + dr_mode = "host"; +}; + +&usbphy0 { + status = "okay"; +}; + &xo_board_clk { clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 38ffdc3cbd..32b178b639 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2023 The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq5018.h> #include <dt-bindings/reset/qcom,gcc-ipq5018.h> @@ -36,6 +37,8 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; CPU1: cpu@1 { @@ -44,6 +47,8 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; L2_0: l2-cache { @@ -54,6 +59,23 @@ }; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + }; + firmware { scm { compatible = "qcom,scm-ipq5018", "qcom,scm"; @@ -82,6 +104,24 @@ #size-cells = <2>; ranges; + bootloader@4a800000 { + reg = <0x0 0x4a800000 0x0 0x200000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + tz_region: tz@4ac00000 { reg = <0x0 0x4ac00000 0x0 0x200000>; no-map; @@ -94,6 +134,19 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + usbphy0: phy@5b000 { + compatible = "qcom,ipq5018-usb-hsphy"; + reg = <0x0005b000 0x120>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5018-tlmm"; reg = <0x01000000 0x300000>; @@ -129,6 +182,12 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; reg = <0x7804000 0x1000>; @@ -146,6 +205,16 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -156,6 +225,61 @@ status = "disabled"; }; + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + usb: usb@8af8800 { + compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB0_BCR>; + + qcom,select-utmi-as-pipe-clk; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ @@ -189,6 +313,24 @@ clocks = <&sleep_clk>; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5018-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5018-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi index 4870cdb764..b37ae77490 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "ipq5332.dtsi" / { @@ -39,6 +40,8 @@ pinctrl-names = "default"; led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts index e89e2e9486..846413817e 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts @@ -15,7 +15,7 @@ }; &blsp1_i2c1 { - clock-frequency = <400000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts index efd480a7af..ed8a54eb95 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts @@ -15,7 +15,7 @@ }; &blsp1_i2c1 { - clock-frequency = <400000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts index eb1fa33d6f..d5f99e741a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts @@ -15,7 +15,7 @@ }; &blsp1_i2c1 { - clock-frequency = <400000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index d3fef2f80a..42e2e48b2b 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -91,11 +91,19 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; opp-shared; + nvmem-cells = <&cpu_speed_bin>; - opp-1488000000 { - opp-hz = /bits/ 64 <1488000000>; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; }; @@ -163,6 +171,11 @@ reg = <0x000a4000 0x721>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@1d { + reg = <0x1d 0x2>; + bits = <7 2>; + }; }; rng: rng@e3000 { @@ -390,8 +403,8 @@ "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; #clock-cells = <1>; - clocks = <&a53pll>, <&xo_board>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index cf4e501c84..61c8fd49c9 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -96,42 +96,49 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&cpu_speed_bin>; opp-shared; opp-864000000 { opp-hz = /bits/ 64 <864000000>; opp-microvolt = <725000>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-microvolt = <787500>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1320000000 { opp-hz = /bits/ 64 <1320000000>; opp-microvolt = <862500>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-microvolt = <925000>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; opp-1608000000 { opp-hz = /bits/ 64 <1608000000>; opp-microvolt = <987500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1062500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -236,31 +243,26 @@ ssphy_0: ssphy@78000 { compatible = "qcom,ipq6018-qmp-usb3-phy"; - reg = <0x0 0x00078000 0x0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0x0 0x00078000 0x0 0x1000>; clocks = <&gcc GCC_USB0_AUX_CLK>, - <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; + <&xo>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB0_PHY_BCR>, <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + reset-names = "phy", + "phy_phy"; - usb0_ssphy: phy@78200 { - reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ - <0x0 0x00078400 0x0 0x200>, /* Rx */ - <0x0 0x00078800 0x0 0x1f8>, /* PCS */ - <0x0 0x00078600 0x0 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; - }; + status = "disabled"; }; qusb_phy_0: qusb@79000 { @@ -314,6 +316,11 @@ reg = <0x0 0x000a4000 0x0 0x2000>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@135 { + reg = <0x135 0x1>; + bits = <7 1>; + }; }; prng: qrng@e3000 { @@ -439,6 +446,26 @@ qcom,ee = <0>; }; + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x78af000 0x0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x78b0000 0x0 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x0 0x078b1000 0x0 0x200>; @@ -449,6 +476,36 @@ status = "disabled"; }; + blsp1_uart4: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x078b2000 0x0 0x200>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x78b3000 0x0 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart6: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x078b4000 0x0 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; @@ -477,6 +534,20 @@ status = "disabled"; }; + blsp1_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078b9000 0x0 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -566,7 +637,7 @@ compatible = "snps,dwc3"; reg = <0x0 0x08a00000 0x0 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_0>, <&usb0_ssphy>; + phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; clocks = <&xo>; clock-names = "ref"; @@ -611,8 +682,8 @@ compatible = "qcom,ipq6018-apcs-apps-global"; reg = <0x0 0x0b111000 0x0 0x1000>; #clock-cells = <1>; - clocks = <&a53pll>, <&xo>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; @@ -731,7 +802,7 @@ }; }; - pcie0: pci@20000000 { + pcie0: pcie@20000000 { compatible = "qcom,pcie-ipq6018"; reg = <0x0 0x20000000 0x0 0xf1d>, <0x0 0x20000f20 0x0 0xa8>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index b33145b756..26441447c8 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -125,32 +125,26 @@ ssphy_1: phy@58000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; - reg = <0x00058000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00058000 0x1000>; clocks = <&gcc GCC_USB1_AUX_CLK>, - <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; + <&xo>, + <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3phy_1_cc_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB1_PHY_BCR>, - <&gcc GCC_USB3PHY_1_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - usb1_ssphy: phy@58200 { - reg = <0x00058200 0x130>, /* Tx */ - <0x00058400 0x200>, /* Rx */ - <0x00058800 0x1f8>, /* PCS */ - <0x00058600 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_1_cc_pipe_clk"; - }; + status = "disabled"; }; qusb_phy_1: phy@59000 { @@ -168,32 +162,26 @@ ssphy_0: phy@78000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; - reg = <0x00078000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00078000 0x1000>; clocks = <&gcc GCC_USB0_AUX_CLK>, - <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; + <&xo>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3phy_0_cc_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB0_PHY_BCR>, - <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - usb0_ssphy: phy@78200 { - reg = <0x00078200 0x130>, /* Tx */ - <0x00078400 0x200>, /* Rx */ - <0x00078800 0x1f8>, /* PCS */ - <0x00078600 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_0_cc_pipe_clk"; - }; + status = "disabled"; }; qusb_phy_0: phy@79000 { @@ -369,8 +357,14 @@ gcc: gcc@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; - clocks = <&xo>, <&sleep_clk>; - clock-names = "xo", "sleep_clk"; + clocks = <&xo>, + <&sleep_clk>, + <&pcie_qmp0>, + <&pcie_qmp1>; + clock-names = "xo", + "sleep_clk", + "pcie0_pipe", + "pcie1_pipe"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; @@ -406,7 +400,7 @@ }; sdhc_1: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; reg-names = "hc", "core"; @@ -523,6 +517,20 @@ status = "disabled"; }; + blsp1_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c5: i2c@78b9000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -628,7 +636,7 @@ compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_0>, <&usb0_ssphy>; + phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; @@ -670,7 +678,7 @@ compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_1>, <&usb1_ssphy>; + phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; @@ -708,8 +716,8 @@ compatible = "qcom,ipq8074-apcs-apps-global", "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; - clocks = <&a53pll>, <&xo>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #clock-cells = <1>; #mbox-cells = <1>; @@ -781,7 +789,7 @@ }; }; - pcie1: pci@10000000 { + pcie1: pcie@10000000 { compatible = "qcom,pcie-ipq8074"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, @@ -842,7 +850,7 @@ status = "disabled"; }; - pcie0: pci@20000000 { + pcie0: pcie@20000000 { compatible = "qcom,pcie-ipq8074-gen3"; reg = <0x20000000 0xf1d>, <0x20000f20 0xa8>, diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi new file mode 100644 index 0000000000..91e104b0f8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP board common device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "ipq9574.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + regulator_fixed_3p3: s3300 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_3p3"; + }; + + regulator_fixed_0p925: s0925 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_0p925"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + + mp5496_l2: l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio37"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb_0_dwc3 { + dr_mode = "host"; +}; + +&usb_0_qmpphy { + vdda-pll-supply = <&mp5496_l2>; + vdda-phy-supply = <®ulator_fixed_0p925>; + + status = "okay"; +}; + +&usb_0_qusbphy { + vdd-supply = <®ulator_fixed_0p925>; + vdda-pll-supply = <&mp5496_l2>; + vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts index 2b093e0263..f4f9199d4a 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -8,58 +8,12 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; }; &sdhc_1 { @@ -74,10 +28,6 @@ status = "okay"; }; -&sleep_clk { - clock-frequency = <32000>; -}; - &tlmm { sdc_default_state: sdc-default-state { clk-pins { @@ -110,15 +60,4 @@ bias-pull-down; }; }; - - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 877026ccc6..1bb8d96c9a 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -8,69 +8,11 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - regulator_fixed_3p3: s3300 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-name = "fixed_3p3"; - }; - - regulator_fixed_0p925: s0925 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-boot-on; - regulator-always-on; - regulator-name = "fixed_0p925"; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - - mp5496_l2: l2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; }; &sdhc_1 { @@ -85,10 +27,6 @@ status = "okay"; }; -&sleep_clk { - clock-frequency = <32000>; -}; - &tlmm { sdc_default_state: sdc-default-state { clk-pins { @@ -122,30 +60,3 @@ }; }; }; - -&usb_0_dwc3 { - dr_mode = "host"; -}; - -&usb_0_qmpphy { - vdda-pll-supply = <&mp5496_l2>; - vdda-phy-supply = <®ulator_fixed_0p925>; - - status = "okay"; -}; - -&usb_0_qusbphy { - vdd-supply = <®ulator_fixed_0p925>; - vdda-pll-supply = <&mp5496_l2>; - vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; - - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <24000000>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts index c8fa54e1a6..d36d107876 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts index f01de6628c..c30c9fbedf 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts index 6efae3426c..0dc382f5d5 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -8,73 +8,9 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 8a72ad4afd..5f83ee42a7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -106,42 +106,56 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; opp-shared; + nvmem-cells = <&cpu_speed_bin>; opp-936000000 { opp-hz = /bits/ 64 <936000000>; opp-microvolt = <725000>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <787500>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <862500>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1416000000 { opp-hz = /bits/ 64 <1416000000>; opp-microvolt = <862500>; + opp-supported-hw = <0x7>; clock-latency-ns = <200000>; }; opp-1488000000 { opp-hz = /bits/ 64 <1488000000>; opp-microvolt = <925000>; + opp-supported-hw = <0x7>; clock-latency-ns = <200000>; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <987500>; + opp-supported-hw = <0x5>; clock-latency-ns = <200000>; }; opp-2208000000 { opp-hz = /bits/ 64 <2208000000>; opp-microvolt = <1062500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -223,6 +237,11 @@ reg = <0x000a4000 0x5a1>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@15 { + reg = <0x15 0x2>; + bits = <7 2>; + }; }; cryptobam: dma-controller@704000 { @@ -652,8 +671,8 @@ "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; #clock-cells = <1>; - clocks = <&a73pll>, <&xo_board_clk>; - clock-names = "pll", "xo"; + clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 57a74eea10..b32c7a9739 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> /* * NOTE: The original firmware from Acer can only boot 32-bit kernels. @@ -83,6 +84,29 @@ }; }; +&blsp_i2c4 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + }; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index aa4c1ab1e6..3459145516 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -3,6 +3,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> @@ -22,6 +24,19 @@ stdout-path = "serial0"; }; + reserved-memory { + /delete-node/ reserved@86680000; + /delete-node/ rmtfs@86700000; + + rmtfs: rmtfs@86680000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86680000 0x0 0x160000>; + no-map; + + qcom,client-id = <1>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -50,6 +65,17 @@ }; }; + reg_headphones_avdd: regulator-headphones-avdd { + compatible = "regulator-fixed"; + regulator-name = "headphones_avdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&headphones_avdd_default>; + pinctrl-names = "default"; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; @@ -58,8 +84,41 @@ }; }; -&blsp_uart2 { +&blsp_i2c3 { status = "okay"; + + headphones: audio-codec@10 { + compatible = "asahi-kasei,ak4375"; + reg = <0x10>; + avdd-supply = <®_headphones_avdd>; + tvdd-supply = <&pm8916_l6>; + pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&headphones_pdn_default>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + }; + + speaker_codec_top: audio-codec@34 { + compatible = "nxp,tfa9897"; + reg = <0x34>; + vddd-supply = <&pm8916_l6>; + rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_top_default>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Top"; + #sound-dai-cells = <0>; + }; + + speaker_codec_bottom: audio-codec@36 { + compatible = "nxp,tfa9897"; + reg = <0x36>; + vddd-supply = <&pm8916_l6>; + rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_bottom_default>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Bottom"; + #sound-dai-cells = <0>; + }; }; &blsp_i2c4 { @@ -153,6 +212,22 @@ }; }; +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -169,6 +244,17 @@ status = "okay"; }; +&q6afedai { + dai@18 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -183,6 +269,54 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + /* Add pin switches for speakers to allow disabling them individually */ + model = "alcatel-idol3"; + widgets = + "Speaker", "Speaker Top", + "Speaker", "Speaker Bottom"; + pin-switches = "Speaker Top", "Speaker Bottom"; + audio-routing = + "Speaker Top", "Speaker Top OUT", + "Speaker Bottom", "Speaker Bottom OUT", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>; + }; + }; +}; + +&sound_link_backend0 { + /* Primary MI2S is not used, replace with Secondary MI2S for headphones */ + link-name = "Secondary MI2S"; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&headphones>; + }; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -212,6 +346,15 @@ status = "okay"; }; +/* Only some of the pins are used */ +&pri_mi2s_default { + pins = "gpio113", "gpio115"; +}; + +&pri_mi2s_sleep { + pins = "gpio113", "gpio115"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; @@ -245,6 +388,20 @@ bias-disable; }; + headphones_avdd_default: headphones-avdd-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + headphones_pdn_default: headphones-pdn-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + /* * The OEM wired an additional GPIO to be asserted so that * the si-en,sn3190 LED IC works. Since this GPIO is not @@ -291,6 +448,20 @@ bias-disable; }; + speaker_bottom_default: speaker-bottom-default-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + speaker_top_default: speaker-top-default-state { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index a8be6ff668..77618c7374 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -3,6 +3,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -130,6 +132,18 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_rpm_regulators { pm8916_l17: l17 { regulator-min-microvolt = <2850000>; @@ -151,6 +165,13 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index aad4a2e5e6..3a3e794c02 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -3,6 +3,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -25,17 +27,45 @@ /* * For some reason, the signed wcnss firmware is not relocatable. - * It must be loaded at 0x8b600000. All other firmware is relocatable, - * so place wcnss at the fixed address and then all other firmware - * regions will be automatically allocated at a fitting place. + * It must be loaded at 0x8b600000. Unfortunately, this also means that + * mpss_mem does not fit when loaded to the typical address at 0x86800000. + * + * Load wcnss_mem to the fixed address and relocate mpss_mem to the next + * working higher address. For some reason the modem firmware does not + * boot when placed at 0x8a800000 to 0x8e800000. */ reserved-memory { + /delete-node/ mpss@86800000; /delete-node/ wcnss; wcnss_mem: wcnss@8b600000 { reg = <0x0 0x8b600000 0x0 0x600000>; no-map; }; + + mpss_mem: mpss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x5000000>; + no-map; + }; + }; + + battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <9500000>; + charge-full-design-microamp-hours = <2500000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4330000 100>, <4265000 95>, + <4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>, + <4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>, + <3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>, + <3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>, + <3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>, + <3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>, + <3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>, + <3000000 0>; }; gpio-keys { @@ -226,6 +256,29 @@ status = "okay"; }; +&pm8916_bms { + status = "okay"; + + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; +}; + +&pm8916_charger { + status = "okay"; + + monitored-battery = <&battery>; + + qcom,fast-charge-safe-current = <900000>; + qcom,fast-charge-safe-voltage = <4300000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -238,10 +291,6 @@ }; }; -&pm8916_usbin { - status = "okay"; -}; - &pm8916_vib { status = "okay"; }; @@ -255,14 +304,21 @@ non-removable; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; +}; + &usb { status = "okay"; dr_mode = "peripheral"; - extcon = <&pm8916_usbin>; + extcon = <&pm8916_charger>; }; &usb_hs_phy { - extcon = <&pm8916_usbin>; + extcon = <&pm8916_charger>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 41cadb906b..3b7fdb6797 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -3,9 +3,12 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "BQ Aquaris X5 (Longcheer L8910)"; @@ -22,6 +25,16 @@ stdout-path = "serial0"; }; + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + + pinctrl-0 = <&spk_ext_pa_default>; + pinctrl-names = "default"; + }; + flash-led-controller { compatible = "ocs,ocp8110"; enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; @@ -74,6 +87,46 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + vin-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + pinctrl-0 = <&status_led_default>; + pinctrl-names = "default"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +}; + &blsp_i2c3 { status = "okay"; @@ -107,6 +160,27 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_gpios { + status_led_default: status-led-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + bias-disable; + output-high; + }; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -137,6 +211,28 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + /* + * Provide widgets/pin-switches to allow enabling speaker separately. + * The hardware does not provide a way to disable the output via the + * headphone jack when the speaker is enabled. + */ + model = "bq-paella"; + widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker"; + audio-routing = + "Speaker", "Speaker Amp OUT", + "Speaker Amp IN", "HPH_R", + "Headphones", "HPH_L", + "Headphones", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + aux-devs = <&speaker_amp>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -205,6 +301,13 @@ bias-disable; }; + spk_ext_pa_default: spk-ext-pa-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi new file mode 100644 index 0000000000..0399616226 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices + * (or similar SoCs) with audio routed via the QDSP6 services provided by the + * modem firmware. The digital/analog codec in the SoC/PMIC is used by default, + * but boards can define additional codecs by adding additional backend DAI links. + */ + +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +&apr { + status = "okay"; +}; + +&bam_dmux { + status = "okay"; +}; + +&bam_dmux_dma { + status = "okay"; +}; + +&lpass { + status = "reserved"; /* Controlled by QDSP6 */ +}; + +&lpass_codec { + status = "okay"; +}; + +&mba_mem { + status = "okay"; +}; + +&mpss { + status = "okay"; +}; + +&mpss_mem { + status = "okay"; +}; + +&pm8916_codec { + status = "okay"; +}; + +&q6afedai { + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; +}; + +&sound { + compatible = "qcom,msm8916-qdsp6-sndcard"; + model = "msm8916"; + + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + frontend0-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + frontend1-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + frontend2-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + frontend3-dai-link { + link-name = "MultiMedia4"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + sound_link_backend0: backend0-dai-link { + link-name = "Primary MI2S"; + + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + sound_link_backend1: backend1-dai-link { + link-name = "Tertiary MI2S"; + + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 0b29132b74..2937495940 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0-only #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { aliases { @@ -196,6 +199,18 @@ }; }; +&blsp_i2c1 { + status = "okay"; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; +}; + &blsp_i2c2 { status = "okay"; @@ -243,6 +258,25 @@ status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + &mdss { status = "okay"; }; @@ -253,6 +287,10 @@ pinctrl-1 = <&mdss_sleep>; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5400000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -265,6 +303,13 @@ }; }; +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -279,6 +324,32 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + model = "samsung-a2015"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { status = "okay"; extcon = <&muic>, <&muic>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index f5a8083695..3b934f5eba 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -49,11 +49,6 @@ }; }; -&touchkey { - vcc-supply = <®_touch_key>; - vdd-supply = <®_key_led>; -}; - &accelerometer { mount-matrix = "0", "1", "0", "1", "0", "0", @@ -108,6 +103,11 @@ remote-endpoint = <&panel_in>; }; +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; +}; + &vibrator { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 0824ab041d..3c49dac92d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -65,6 +65,10 @@ }; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5a00000>; +}; + ®_motor_vdd { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 3f145dde40..5882b3a593 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -49,6 +49,10 @@ status = "disabled"; }; +&sound { + model = "samsung-gmax"; /* No secondary microphone */ +}; + &tlmm { gpio_leds_default: gpio-led-default-state { pins = "gpio60"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index c19cf20d74..fbd2caf405 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -3,9 +3,12 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { aliases { @@ -65,25 +68,6 @@ }; }; -&blsp_i2c4 { - status = "okay"; - - fuelgauge@36 { - compatible = "maxim,max77849-battery"; - reg = <0x36>; - - maxim,rsns-microohm = <10000>; - maxim,over-heat-temp = <600>; - maxim,over-volt = <4400>; - - interrupt-parent = <&tlmm>; - interrupts = <121 IRQ_TYPE_EDGE_FALLING>; - - pinctrl-0 = <&fuelgauge_int_default>; - pinctrl-names = "default"; - }; -}; - &blsp_i2c2 { status = "okay"; @@ -112,10 +96,52 @@ }; }; +&blsp_i2c4 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max77849-battery"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4400>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_int_default>; + pinctrl-names = "default"; + }; +}; + &blsp_uart2 { status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5400000>; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -133,6 +159,13 @@ status = "okay"; }; +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -147,6 +180,27 @@ status = "okay"; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { dr_mode = "peripheral"; extcon = <&pm8916_usbin>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 75c4854ecd..5b34529b81 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -9,6 +9,14 @@ compatible = "samsung,gt510", "qcom,msm8916"; chassis-type = "tablet"; + speaker_codec: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + pinctrl-0 = <&audio_sdmode_default>; + pinctrl-names = "default"; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; @@ -112,6 +120,10 @@ }; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -142,7 +154,21 @@ remote-endpoint = <&panel_in>; }; +&sound { + model = "samsung-gt510"; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; +}; + &tlmm { + audio_sdmode_default: audio-sdmode-default-state { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + buckbooster_en_default: buckbooster-en-default-state { pins = "gpio51"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 11359bcc27..579312ed53 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -35,6 +35,26 @@ pinctrl-names = "default"; }; + i2c-amplifier { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; + }; + vibrator { compatible = "gpio-vibrator"; enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; @@ -64,6 +84,10 @@ }; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -94,7 +118,21 @@ remote-endpoint = <&panel_in>; }; +&sound { + model = "samsung-a2015"; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>; + pinctrl-names = "default", "sleep"; +}; + &tlmm { + amp_i2c_default: amp-i2c-default-state { + pins = "gpio55", "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + buckbooster_en_default: buckbooster-en-default-state { pins = "gpio8"; function = "gpio"; @@ -123,6 +161,14 @@ bias-disable; }; + secondary_mic_default: secondary-mic-default-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + tsp_int_default: tsp-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index fe59be3505..5ca2ada266 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -135,6 +137,10 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5800000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -154,6 +160,14 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + model = "msm8916-1mic"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { extcon = <&muic>, <&muic>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 58c2f5a70e..ba8650971d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -19,6 +19,10 @@ status = "disabled"; }; +&pm8916_codec { + qcom,micbias1-ext-cap; +}; + &touchscreen { /* FIXME: Missing sm5703-mfd driver to power up vdd-supply */ }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 68da2a2d30..5ce8f1350a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -319,6 +321,10 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5a00000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -350,6 +356,13 @@ no-1-8-v; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { status = "okay"; extcon = <&muic>, <&muic>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts index 6fe1850ba2..f349975008 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -13,16 +13,16 @@ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; -&led_r { - gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; +&led_b { + gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; }; &led_g { gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; }; -&led_b { - gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; +&led_r { + gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 16d4a91022..6cb3911ba1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -13,16 +13,16 @@ gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; }; -&led_r { - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; +&led_b { + gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; }; &led_g { gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; }; -&led_b { - gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; +&led_r { + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; &mpss { diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 241c3a73c8..510b3b3c4e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> @@ -25,6 +27,28 @@ stdout-path = "serial0"; }; + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + pinctrl-0 = <&speaker_amp_default>; + pinctrl-names = "default"; + }; + + /* + * This seems to be actually an analog switch that either routes audio + * to the headphone jack or nowhere. Given that we need to enable a GPIO + * to get sound on headphones, modelling it as simple-audio-amplifier + * works just fine. + */ + headphones_switch: audio-switch { + compatible = "simple-audio-amplifier"; + enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Switch"; + pinctrl-0 = <&headphones_switch_default>; + pinctrl-names = "default"; + }; + flash-led-controller { compatible = "ocs,ocp8110"; enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; @@ -147,6 +171,18 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5100000>; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -181,6 +217,30 @@ non-removable; }; +&sound { + /* + * Provide widgets/pin-switches to allow enabling speaker and headphones + * separately. Both are routed via the HPH_L/HPH_R pins of the codec. + */ + model = "wt88047"; + widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker", "Headphones"; + audio-routing = + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "HPH_R", + "Speaker Amp INR", "HPH_R", + "Headphones", "Headphones Switch OUTL", + "Headphones", "Headphones Switch OUTR", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2"; + aux-devs = <&speaker_amp>, <&headphones_switch>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -227,6 +287,13 @@ bias-pull-up; }; + headphones_switch_default: headphones-switch-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + imu_default: imu-default-state { pins = "gpio115"; function = "gpio"; @@ -235,6 +302,13 @@ bias-disable; }; + speaker_amp_default: speaker-amp-default-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { touchscreen-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts index 5e6ba8c58b..a98efcfe78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -13,16 +13,16 @@ gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; }; -&led_r { - gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; +&led_b { + gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; }; &led_g { gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; }; -&led_b { - gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; +&led_r { + gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 057c1a0b7a..e423c57ddd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> / { @@ -539,9 +540,6 @@ compatible = "qcom,msm8916-bimc"; reg = <0x00400000 0x62000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; }; tsens: thermal-sensor@4a9000 { @@ -574,18 +572,12 @@ compatible = "qcom,msm8916-pcnoc"; reg = <0x00500000 0x11000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; }; snoc: interconnect@580000 { compatible = "qcom,msm8916-snoc"; reg = <0x00580000 0x14000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; }; stm: stm@802000 { @@ -1989,6 +1981,54 @@ label = "hexagon"; + apr: apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,smd-channels = "fastrpcsmd-apps-dsp"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts new file mode 100644 index 0000000000..3cec51891a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Huawei Honor 5X / GR5 (2016)"; + compatible = "huawei,kiwi", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1600000>; + no-map; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@1e { + compatible = "kionix,kx023-1025"; + reg = <0x1e>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; + + proximity@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&tlmm>; + interrupts = <113 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + led-max-microamp = <25000>; + amstaos,proximity-diodes = <0>; + + pinctrl-0 = <&prox_irq_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@1c { + compatible = "cypress,tt21000"; + + reg = <0x1c>; + interrupt-parent = <&tlmm>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + /* + * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a + * fixed regulator that is automatically enabled by pm8916_l16. + */ + vdd-supply = <&pm8916_l16>; + vddio-supply = <&pm8916_l16>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + prox_irq_default: prox-irq-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts index 6802714fda..e3404c4455 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> / { @@ -120,6 +121,46 @@ }; +&blsp_i2c2 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + vin-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + pinctrl-0 = <&status_led_default>; + pinctrl-names = "default"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +}; + &blsp_i2c3 { status = "okay"; @@ -139,6 +180,7 @@ light-sensor@23 { compatible = "liteon,ltr559"; reg = <0x23>; + proximity-near-level = <75>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l5>; @@ -184,6 +226,16 @@ status = "okay"; }; +&pm8916_gpios { + status_led_default: status-led-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + bias-disable; + output-high; + }; +}; + &pm8916_mpps { pwm_out: mpp4-state { pins = "mpp4"; @@ -247,6 +299,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index fccd8fec8b..aa6c39482a 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -3,10 +3,12 @@ /dts-v1/; #include "msm8939-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { model = "Samsung Galaxy A7 (2015)"; @@ -287,6 +289,18 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; +}; + &blsp_i2c5 { status = "okay"; @@ -309,6 +323,29 @@ status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5800000>; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -321,6 +358,13 @@ }; }; +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -335,6 +379,32 @@ status = "okay"; }; +&sound { + model = "samsung-a2015"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { extcon = <&muic>, <&muic>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index f9b6122e65..82d85ff610 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8939.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> / { @@ -601,9 +602,6 @@ bimc: interconnect@400000 { compatible = "qcom,msm8939-bimc"; reg = <0x00400000 0x62000>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; #interconnect-cells = <1>; }; @@ -647,25 +645,16 @@ pcnoc: interconnect@500000 { compatible = "qcom,msm8939-pcnoc"; reg = <0x00500000 0x11000>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; #interconnect-cells = <1>; }; snoc: interconnect@580000 { compatible = "qcom,msm8939-snoc"; reg = <0x00580000 0x14080>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; #interconnect-cells = <1>; snoc_mm: interconnect-snoc { compatible = "qcom,msm8939-snoc-mm"; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, - <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; #interconnect-cells = <1>; }; }; @@ -1537,6 +1526,20 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil"; reg = <0x04080000 0x100>, <0x04020000 0x040>; @@ -1569,6 +1572,22 @@ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; status = "disabled"; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + mba { memory-region = <&mba_mem>; }; @@ -1585,6 +1604,54 @@ qcom,remote-pid = <1>; label = "hexagon"; + + apr: apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; }; }; @@ -2117,6 +2184,8 @@ #address-cells = <1>; #size-cells = <1>; ranges; + /* Necessary because firmware does not configure this correctly */ + clock-frequency = <19200000>; frame@b121000 { reg = <0x0b121000 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index e7de763266..ad2f8cf9c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -174,10 +174,10 @@ }; }; - memory { + memory@10000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0 0x10000000 0 0>; }; pmu { @@ -726,6 +726,48 @@ bias-disable; }; + spi_3_default: spi-3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi_3_sleep: spi-3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_5_default: spi-5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_spi5"; + drive-strength = <2>; + bias-disable; + }; + + spi_5_sleep: spi-5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_6_default: spi-6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_spi6"; + drive-strength = <2>; + bias-disable; + }; + + spi_6_sleep: spi-6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcnss_pin_a: wcnss-active-state { wcss-wlan2-pins { @@ -1004,7 +1046,7 @@ apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x01e20000 0x20000>; + ranges = <0 0x01e20000 0x20000>; clocks = <&gcc GCC_SMMU_CFG_CLK>, <&gcc GCC_APSS_TCU_ASYNC_CLK>; @@ -1360,6 +1402,26 @@ status = "disabled"; }; + spi_3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_3_default>; + pinctrl-1 = <&spi_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + i2c_4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x600>; @@ -1413,6 +1475,26 @@ status = "disabled"; }; + spi_5: spi@7af5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_5_default>; + pinctrl-1 = <&spi_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + i2c_6: i2c@7af6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af6000 0x600>; @@ -1433,6 +1515,26 @@ status = "disabled"; }; + spi_6: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_6_default>; + pinctrl-1 = <&spi_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + i2c_7: i2c@7af7000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af7000 0x600>; @@ -1645,7 +1747,7 @@ apr { compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index fa8ec92ce4..ee6f87c828 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -792,10 +792,10 @@ <&pciephy_0>, <&pciephy_1>, <&pciephy_2>, - <&ssusb_phy_0>, - <&ufsphy_lane 0>, - <&ufsphy_lane 1>, - <&ufsphy_lane 2>; + <&usb3phy>, + <&ufsphy 0>, + <&ufsphy 1>, + <&ufsphy 2>; clock-names = "cxo", "cxo2", "sleep_clk", @@ -812,9 +812,6 @@ compatible = "qcom,msm8996-bimc"; reg = <0x00408000 0x5a000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; }; tsens0: thermal-sensor@4a9000 { @@ -865,18 +862,12 @@ compatible = "qcom,msm8996-cnoc"; reg = <0x00500000 0x1000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; }; snoc: interconnect@524000 { compatible = "qcom,msm8996-snoc"; reg = <0x00524000 0x1c000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; }; a0noc: interconnect@543000 { @@ -896,19 +887,14 @@ compatible = "qcom,msm8996-a1noc"; reg = <0x00562000 0x5000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; }; a2noc: interconnect@583000 { compatible = "qcom,msm8996-a2noc"; reg = <0x00583000 0x7000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; - clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, - <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + clock-names = "aggre2_ufs_axi", "ufs_axi"; + clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>, <&gcc GCC_UFS_AXI_CLK>; }; @@ -916,19 +902,14 @@ compatible = "qcom,msm8996-mnoc"; reg = <0x005a4000 0x1c000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a", "iface"; - clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, - <&rpmcc RPM_SMD_MMAXI_A_CLK>, - <&mmcc AHB_CLK_SRC>; + clock-names = "iface"; + clocks = <&mmcc AHB_CLK_SRC>; }; pnoc: interconnect@5c0000 { compatible = "qcom,msm8996-pnoc"; reg = <0x005c0000 0x3000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; }; tcsr_mutex: hwlock@740000 { @@ -2060,7 +2041,7 @@ reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lane>; + phys = <&ufsphy>; phy-names = "ufsphy"; power-domains = <&gcc UFS_GDSC>; @@ -2113,25 +2094,18 @@ ufsphy: phy@627000 { compatible = "qcom,msm8996-qmp-ufs-phy"; - reg = <0x00627000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00627000 0x1000>; clocks = <&gcc GCC_UFS_CLKREF_CLK>; clock-names = "ref"; resets = <&ufshc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufsphy_lane: phy@627400 { - reg = <0x627400 0x12c>, - <0x627600 0x200>, - <0x627c00 0x1b4>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; camss: camss@a34000 { @@ -2466,9 +2440,8 @@ "handover", "stop-ack"; - clocks = <&xo_board>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; - clock-names = "xo", "aggre2"; + clocks = <&xo_board>; + clock-names = "xo"; memory-region = <&slpi_mem>; @@ -2513,10 +2486,15 @@ <&gcc GCC_MSS_GPLL0_DIV_CLK>, <&gcc GCC_MSS_SNOC_AXI_CLK>, <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, - <&rpmcc RPM_SMD_PCNOC_CLK>, <&rpmcc RPM_SMD_QDSS_CLK>; - clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + clock-names = "iface", + "bus", + "mem", + "xo", + "gpll0_mss", + "snoc_axi", + "mnoc_axi", + "qdss"; resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; @@ -3077,7 +3055,7 @@ compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phys = <&hsusb_phy1>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,hird-threshold = /bits/ 8 <0>; snps,dis_u2_susphy_quirk; @@ -3089,32 +3067,26 @@ usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x07410000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x07410000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB3_PHY_BCR>, - <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; - status = "disabled"; + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - ssusb_phy_0: phy@7410200 { - reg = <0x07410200 0x200>, - <0x07410400 0x130>, - <0x07410600 0x1a8>; - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "usb3_phy_pipe_clk_src"; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - }; + status = "disabled"; }; hsusb_phy1: phy@7411000 { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index ebc5ba1b36..2793cc22d3 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -933,7 +933,7 @@ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996"; reg = <0x01c00000 0x2000>, <0x1b000000 0xf1d>, @@ -1004,7 +1004,7 @@ compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x01da4000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lanes>; + phys = <&ufsphy>; phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>; @@ -1045,11 +1045,7 @@ ufsphy: phy@1da7000 { compatible = "qcom,msm8998-qmp-ufs-phy"; - reg = <0x01da7000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; + reg = <0x01da7000 0x1000>; clock-names = "ref", @@ -1061,14 +1057,8 @@ reset-names = "ufsphy"; resets = <&ufshc 0>; - ufsphy_lanes: phy@1da7400 { - reg = <0x01da7400 0x128>, - <0x01da7600 0x1fc>, - <0x01da7c00 0x1dc>, - <0x01da7800 0x128>, - <0x01da7a00 0x1fc>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + status = "disabled"; }; tcsr_mutex: hwlock@1f40000 { @@ -1615,9 +1605,8 @@ px-supply = <&vreg_lvs2a_1p8>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; - clock-names = "xo", "aggre2"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; memory-region = <&slpi_mem>; @@ -2157,7 +2146,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&qusb2phy>, <&usb1_ssphy>; + phys = <&qusb2phy>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -2166,33 +2155,26 @@ usb3phy: phy@c010000 { compatible = "qcom,msm8998-qmp-usb3-phy"; - reg = <0x0c010000 0x18c>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0c010000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", + "phy_phy"; - usb1_ssphy: phy@c010200 { - reg = <0xc010200 0x128>, - <0xc010400 0x200>, - <0xc010c00 0x20c>, - <0xc010600 0x128>, - <0xc010800 0x200>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + status = "disabled"; }; qusb2phy: phy@c012000 { diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi index 5f1d15db5c..d886a9e4b0 100644 --- a/arch/arm64/boot/dts/qcom/pm2250.dtsi +++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi @@ -19,7 +19,7 @@ compatible = "qcom,pm8916-pon"; reg = <0x800>; - pm2250_pwrkey: pwrkey { + pm4125_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_POWER>; @@ -27,7 +27,7 @@ bias-pull-up; }; - pm2250_resin: resin { + pm4125_resin: resin { compatible = "qcom,pm8941-resin"; interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; @@ -43,11 +43,11 @@ interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm2250_gpios: gpio@c000 { + pm4125_gpios: gpio@c000 { compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm2250_gpios 0 0 10>; + gpio-ranges = <&pm4125_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index df0afe82f2..3bf7cf5d17 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -148,7 +148,7 @@ status = "disabled"; }; - pm7250b_gpios: pinctrl@c000 { + pm7250b_gpios: gpio@c000 { compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index db3d5c17a7..797a18c249 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -64,9 +64,6 @@ pm8550_pwm: pwm { compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; - - #address-cells = <1>; - #size-cells = <0>; #pwm-cells = <2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi index c47646a467..4dc1f03ab2 100644 --- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -33,16 +33,16 @@ &spmi_bus { - pm8550ve: pmic@5 { + pm8550ve: pmic@PMK8550VE_SID { compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x5 SPMI_USID>; + reg = <PMK8550VE_SID SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm8550ve_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; - interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; #thermal-sensor-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f4de867877..4b2e8fb47d 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,6 +41,35 @@ }; }; + pm8916_charger: charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + + status = "disabled"; + }; + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; @@ -91,6 +120,25 @@ }; }; + pm8916_bms: battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 1eb7401706..f0ed15458d 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -22,7 +22,7 @@ mode-bootloader = <0x02>; }; }; - + &spmi_bus { pmk8350: pmic@PMK8350_SID { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index 40a8506553..89beac833d 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -5,12 +5,15 @@ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. */ +#include <dt-bindings/clock/qcom,dispcc-qcm2290.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interconnect/qcom,qcm2290.h> +#include <dt-bindings/interconnect/qcom,rpm-icc.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -150,6 +153,8 @@ clocks = <&rpmcc RPM_SMD_CE1_CLK>; clock-names = "core"; #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; }; }; @@ -194,6 +199,7 @@ CLUSTER_PD: power-domain-cpu-cluster { #power-domain-cells = <0>; + power-domains = <&mpm>; domain-idle-states = <&CLUSTER_SLEEP>; }; }; @@ -261,6 +267,24 @@ }; }; }; + + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 1>; + interrupt-controller; + #interrupt-cells = <2>; + #power-domain-cells = <0>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */ + <5 296>, /* Soundwire master_irq */ + <12 422>, /* DWC3 ss_phy_irq */ + <24 79>, /* Soundwire wake_irq */ + <86 183>, /* MPM wake, SPMI */ + <90 260>; /* QUSB2_PHY DP+DM */ + }; }; reserved_memory: reserved-memory { @@ -429,6 +453,7 @@ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 127>; + wakeup-parent = <&mpm>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -675,6 +700,33 @@ status = "disabled"; }; + system_noc: interconnect@1880000 { + compatible = "qcom,qcm2290-snoc"; + reg = <0x0 0x01880000 0x0 0x60200>; + #interconnect-cells = <2>; + + qup_virt: interconnect-qup { + compatible = "qcom,qcm2290-qup-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,qcm2290-mmnrt-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,qcm2290-mmrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,qcm2290-cnoc"; + reg = <0x0 0x01900000 0x0 0x8200>; + #interconnect-cells = <2>; + }; + qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; @@ -687,6 +739,60 @@ }; }; + pmu@1b8e300 { + compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, @@ -699,7 +805,7 @@ "obsrvr", "intr", "cnfg"; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "periph_irq"; qcom,ee = <0>; qcom,channel = <0>; @@ -714,8 +820,8 @@ reg = <0x0 0x04411000 0x0 0x1ff>, <0x0 0x04410000 0x0 0x8>; #qcom,sensors = <10>; - interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -727,9 +833,22 @@ clock-names = "core"; }; + bimc: interconnect@4480000 { + compatible = "qcom,qcm2290-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + rpm_msg_ram: sram@45f0000 { - compatible = "qcom,rpm-msg-ram"; + compatible = "qcom,rpm-msg-ram", "mmio-sram"; reg = <0x0 0x045f0000 0x0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x045f0000 0x7000>; + + apss_mpm: sram@1b8 { + reg = <0x1b8 0x48>; + }; }; sram@4690000 { @@ -762,13 +881,45 @@ resets = <&gcc GCC_SDCC1_BCR>; power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0xc0 0x0>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; bus-width = <8>; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; }; sdhc_2: mmc@4784000 { @@ -792,6 +943,12 @@ power-domains = <&rpmpd QCM2290_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0xa0 0x0>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; @@ -805,11 +962,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -857,6 +1018,15 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -873,6 +1043,12 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -886,6 +1062,12 @@ clock-names = "se"; pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -900,6 +1082,15 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -916,6 +1107,12 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -932,6 +1129,15 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -948,6 +1154,12 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -964,6 +1176,15 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -980,6 +1201,12 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -996,6 +1223,15 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1012,6 +1248,12 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1025,6 +1267,12 @@ clock-names = "se"; pinctrl-0 = <&qup_uart4_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1039,6 +1287,15 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1055,6 +1312,12 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1064,9 +1327,10 @@ usb: usb@4ef8800 { compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; reg = <0x0 0x04ef8800 0x0 0x400>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq"; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -1087,6 +1351,13 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; wakeup-source; #address-cells = <2>; @@ -1112,6 +1383,225 @@ }; }; + mdss: display-subsystem@5e00000 { + compatible = "qcom,qcm2290-mdss"; + reg = <0x0 0x05e00000 0x0 0x1000>; + reg-names = "mdss"; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "core", + "lut", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x05e94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + power-domains = <&rpmpd QCM2290_VDDMX>; + required-opps = <&rpmpd_opp_nom>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,qcm2290-dispcc"; + reg = <0x0 0x05f00000 0x0 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk"; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + remoteproc_mpss: remoteproc@6080000 { compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; reg = <0x0 0x06080000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 2de0b8c26c..1e85c43a6f 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -9,6 +9,8 @@ #define PM7250B_SID 8 #define PM7250B_SID1 9 +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -75,23 +77,13 @@ no-map; }; - adsp_mem: adsp@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - cdsp_mem: cdsp@88f00000 { reg = <0x0 0x88f00000 0x0 0x1e00000>; no-map; }; - mpss_mem: mpss@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - - wpss_mem: wpss@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; no-map; }; @@ -134,6 +126,106 @@ enable-active-high; vin-supply = <&vreg_bob>; }; + + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; }; &apps_rsc { @@ -182,8 +274,9 @@ }; vreg_l7b: ldo7 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3544000>; + /* Constrained for UFS VCC, at least until UFS driver scales voltage */ + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -425,6 +518,42 @@ status = "okay"; }; +&pm7250b_adc { + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm7325_gpios { volume_down_default: volume-down-default-state { pins = "gpio6"; @@ -448,10 +577,93 @@ }; }; +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + cam-flash-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wide-rfc-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pmk8350_rtc { status = "okay"; }; +&pmk8350_vadc { + status = "okay"; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_xo_therm"; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@145 { + reg = <PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_cam_flash_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; + + channel@147 { + reg = <PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_wide_rfc_therm"; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -489,6 +701,26 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm6490/fairphone5/modem.mbn"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn"; + status = "okay"; +}; + &sdc2_clk { drive-strength = <16>; bias-disable; @@ -632,6 +864,28 @@ }; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b>; + vcc-max-microamp = <800000>; + /* + * Technically l9b enables an eLDO (supplied by s1b) which then powers + * VCCQ2 of the UFS. + */ + vccq-supply = <&vreg_l9b>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c>; + vdda-pll-supply = <&vreg_l6b>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; @@ -665,3 +919,8 @@ status = "okay"; }; + +&wifi { + qcom,ath11k-calibration-variant = "Fairphone_5"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts new file mode 100644 index 0000000000..d58d4f5dc3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &video_mem; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Qualcomm Technologies, Inc. QCM6490 IDP"; + compatible = "qcom,qcm6490-idp", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + wpss_mem: wpss@84800000 { + reg = <0x0 0x84800000 0x0 0x1900000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b300000 { + reg = <0x0 0x8b300000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8b310000 { + reg = <0x0 0x8b310000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted_apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l3-supply = <&vreg_s2b_0p876>; + vdd-l5-supply = <&vreg_s2b_0p876>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p752: ldo4 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + reg_l5b_0p752: ldo5 { + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <35440000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p952>; + vqmmc-supply = <&vreg_l19b_1p8>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 2>, /* ADSP */ + <48 4>; /* NFC */ +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&wifi { + memory-region = <&wlan_fw_mem>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 2721f32dfb..2f2eeaf2e9 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -558,9 +558,6 @@ reg = <0x00400000 0x80000>; compatible = "qcom,qcs404-bimc"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; }; tsens: thermal-sensor@4a9000 { @@ -601,18 +598,12 @@ reg = <0x00500000 0x15080>; compatible = "qcom,qcs404-pcnoc"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; }; snoc: interconnect@580000 { reg = <0x00580000 0x23080>; compatible = "qcom,qcs404-snoc"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; }; remoteproc_cdsp: remoteproc@b00000 { @@ -1461,7 +1452,7 @@ }; }; - pcie: pci@10000000 { + pcie: pcie@10000000 { compatible = "qcom,pcie-qcs404"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts new file mode 100644 index 0000000000..ac4579119d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -0,0 +1,472 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &video_mem; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB3gen2"; + compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + wpss_mem: wpss@84800000 { + reg = <0x0 0x84800000 0x0 0x1900000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b300000 { + reg = <0x0 0x8b300000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8b310000 { + reg = <0x0 0x8b310000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted_apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l3-supply = <&vreg_s2b_0p876>; + vdd-l5-supply = <&vreg_s2b_0p876>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p752: ldo4 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + reg_l5b_0p752: ldo5 { + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <35440000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 2>, /* ADSP */ + <48 4>; /* NFC */ +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&wifi { + memory-region = <&wlan_fw_mem>; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index 1c0e5d271e..832f472c4b 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -381,6 +381,20 @@ #power-domain-cells = <1>; }; + ecpricc: clock-controller@280000 { + compatible = "qcom,qdu1000-ecpricc"; + reg = <0x0 0x00280000 0x0 0x31c00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + gpi_dma0: dma-controller@900000 { compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0x0 0x900000 0x0 0x60000>; @@ -1446,13 +1460,10 @@ system-cache-controller@19200000 { compatible = "qcom,qdu1000-llcc"; reg = <0 0x19200000 0 0xd80000>, - <0 0x1a200000 0 0x80000>, - <0 0x221c8128 0 0x4>; - reg-names = "llcc_base", - "llcc_broadcast_base", - "multi_channel_register"; + <0 0x1a200000 0 0x80000>; + reg-names = "llcc0_base", + "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; - multi-ch-bit-off = <24 2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index fd38a6278f..6e9dd0312a 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -7,7 +7,7 @@ #include <dt-bindings/leds/common.h> #include "qcm2290.dtsi" -#include "pm2250.dtsi" +#include "pm4125.dtsi" / { model = "Qualcomm Technologies, Inc. Robotics RB1"; @@ -23,6 +23,14 @@ stdout-path = "serial0:115200n8"; }; + clocks { + clk40M: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -40,6 +48,17 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -158,7 +177,87 @@ }; }; -&pm2250_resin { +&CPU_PD0 { + /delete-property/ power-domains; +}; + +&CPU_PD1 { + /delete-property/ power-domains; +}; + +&CPU_PD2 { + /delete-property/ power-domains; +}; + +&CPU_PD3 { + /delete-property/ power-domains; +}; + +/delete-node/ &CLUSTER_PD; + +&gpi_dma0 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_hdmi_out_1p2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm4125_l5>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pm4125_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; }; @@ -182,23 +281,23 @@ compatible = "qcom,rpm-pm2250-regulators"; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; - vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>; + vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; - vdd_l13_l14_l15_l16-supply = <&pm2250_s4>; + vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; /* * S1 - VDD_APC * S2 - VDD_CX */ - pm2250_s3: s3 { + pm4125_s3: s3 { /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; regulator-boot-on; }; - pm2250_s4: s4 { + pm4125_s4: s4 { /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ regulator-min-microvolt = <2072000>; regulator-max-microvolt = <2072000>; @@ -207,7 +306,7 @@ /* L1 - VDD_MX */ - pm2250_l2: l2 { + pm4125_l2: l2 { /* LPDDR4X VDD2 */ regulator-min-microvolt = <1136000>; regulator-max-microvolt = <1136000>; @@ -215,7 +314,7 @@ regulator-boot-on; }; - pm2250_l3: l3 { + pm4125_l3: l3 { /* LPDDR4X VDDQ */ regulator-min-microvolt = <616000>; regulator-max-microvolt = <616000>; @@ -223,14 +322,14 @@ regulator-boot-on; }; - pm2250_l4: l4 { + pm4125_l4: l4 { /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2700000>; regulator-allow-set-load; }; - pm2250_l5: l5 { + pm4125_l5: l5 { /* CSI/DSI */ regulator-min-microvolt = <1232000>; regulator-max-microvolt = <1232000>; @@ -238,7 +337,7 @@ regulator-boot-on; }; - pm2250_l6: l6 { + pm4125_l6: l6 { /* DRAM PLL */ regulator-min-microvolt = <928000>; regulator-max-microvolt = <928000>; @@ -246,7 +345,7 @@ regulator-boot-on; }; - pm2250_l7: l7 { + pm4125_l7: l7 { /* Wi-Fi CX/MX */ regulator-min-microvolt = <664000>; regulator-max-microvolt = <664000>; @@ -257,20 +356,20 @@ * L9 - VDD_LPI_MX */ - pm2250_l10: l10 { + pm4125_l10: l10 { /* Wi-Fi RFA */ regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - pm2250_l11: l11 { + pm4125_l11: l11 { /* GPS RF1 */ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-boot-on; }; - pm2250_l12: l12 { + pm4125_l12: l12 { /* USB PHYs */ regulator-min-microvolt = <928000>; regulator-max-microvolt = <928000>; @@ -278,7 +377,7 @@ regulator-boot-on; }; - pm2250_l13: l13 { + pm4125_l13: l13 { /* USB/QFPROM/PLLs */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -286,7 +385,7 @@ regulator-boot-on; }; - pm2250_l14: l14 { + pm4125_l14: l14 { /* SDHCI1 VQMMC */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -295,7 +394,7 @@ regulator-always-on; }; - pm2250_l15: l15 { + pm4125_l15: l15 { /* WCD/DSI/BT VDDIO */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -304,38 +403,38 @@ regulator-boot-on; }; - pm2250_l16: l16 { + pm4125_l16: l16 { /* GPS RF2 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; }; - pm2250_l17: l17 { + pm4125_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - pm2250_l18: l18 { + pm4125_l18: l18 { /* VDD_PXn */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm2250_l19: l19 { + pm4125_l19: l19 { /* VDD_PXn */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm2250_l20: l20 { + pm4125_l20: l20 { /* SDHCI1 VMMC */ regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3600000>; regulator-allow-set-load; }; - pm2250_l21: l21 { + pm4125_l21: l21 { /* SDHCI2 VMMC */ regulator-min-microvolt = <2960000>; regulator-max-microvolt = <3300000>; @@ -343,7 +442,7 @@ regulator-boot-on; }; - pm2250_l22: l22 { + pm4125_l22: l22 { /* Wi-Fi */ regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; @@ -352,8 +451,8 @@ }; &sdhc_1 { - vmmc-supply = <&pm2250_l20>; - vqmmc-supply = <&pm2250_l14>; + vmmc-supply = <&pm4125_l20>; + vqmmc-supply = <&pm4125_l14>; pinctrl-0 = <&sdc1_state_on>; pinctrl-1 = <&sdc1_state_off>; pinctrl-names = "default", "sleep"; @@ -365,8 +464,8 @@ }; &sdhc_2 { - vmmc-supply = <&pm2250_l21>; - vqmmc-supply = <&pm2250_l4>; + vmmc-supply = <&pm4125_l21>; + vqmmc-supply = <&pm4125_l4>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; @@ -376,7 +475,34 @@ status = "okay"; }; +&spi5 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk40M>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &tlmm { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio41"; + function = "gpio"; + input-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio46"; + function = "gpio"; + bias-disable; + }; + sd_det_in_on: sd-det-in-on-state { pins = "gpio88"; function = "gpio"; @@ -410,8 +536,8 @@ }; &usb_qmpphy { - vdda-phy-supply = <&pm2250_l12>; - vdda-pll-supply = <&pm2250_l13>; + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; status = "okay"; }; @@ -420,17 +546,18 @@ }; &usb_hsphy { - vdd-supply = <&pm2250_l12>; - vdda-pll-supply = <&pm2250_l13>; - vdda-phy-dpdm-supply = <&pm2250_l21>; + vdd-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + vdda-phy-dpdm-supply = <&pm4125_l21>; status = "okay"; }; &wifi { - vdd-0.8-cx-mx-supply = <&pm2250_l7>; - vdd-1.8-xo-supply = <&pm2250_l13>; - vdd-1.3-rfa-supply = <&pm2250_l10>; - vdd-3.3-ch0-supply = <&pm2250_l22>; + vdd-0.8-cx-mx-supply = <&pm4125_l7>; + vdd-1.8-xo-supply = <&pm4125_l13>; + vdd-1.3-rfa-supply = <&pm4125_l10>; + vdd-3.3-ch0-supply = <&pm4125_l22>; + qcom,ath10k-calibration-variant = "Thundercomm_RB1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 9738c0dacd..52f31f3166 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart4; + serial1 = &uart3; }; chosen { @@ -280,6 +281,12 @@ status = "okay"; }; +&remoteproc_mpss { + firmware-name = "qcom/qrb4210/modem.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm6125-regulators"; @@ -346,13 +353,14 @@ }; vreg_l8a_0p664: l8 { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <728000>; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <640000>; }; vreg_l9a_1p8: l9 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_l10a_1p8: l10 { @@ -389,11 +397,13 @@ vreg_l16a_1p3: l16 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1904000>; + regulator-allow-set-load; }; vreg_l17a_1p3: l17 { regulator-min-microvolt = <1152000>; regulator-max-microvolt = <1384000>; + regulator-allow-set-load; }; vreg_l18a_1p232: l18 { @@ -424,8 +434,9 @@ }; vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3400000>; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + regulator-allow-set-load; }; vreg_l24a_2p96: l24 { @@ -487,6 +498,66 @@ <56 3>, <61 2>, <64 1>, <68 1>, <72 8>, <96 1>; + uart3_default: uart3-default-state { + cts-pins { + pins = "gpio8"; + function = "qup3"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart3_sleep: uart3-sleep-state { + cts-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + lt9611_rst_pin: lt9611-rst-state { pins = "gpio41"; function = "gpio"; @@ -508,16 +579,32 @@ }; }; -&uart4 { +&uart3 { + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&uart3_default>; + pinctrl-1 = <&uart3_sleep>; + pinctrl-names = "default", "sleep"; status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l9a_1p8>; + vddxo-supply = <&vreg_l16a_1p3>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l23a_3p3>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; }; -&usb { +&uart4 { status = "okay"; }; -&usb_dwc3 { - maximum-speed = "super-speed"; +&usb { + status = "okay"; }; &usb_hsphy { @@ -535,6 +622,16 @@ status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; + vdd-1.8-xo-supply = <&vreg_l16a_1p3>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l23a_3p3>; + qcom,ath10k-calibration-variant = "Thundercomm_RB2"; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts index bb149e5779..edc0e42ee0 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts @@ -46,7 +46,7 @@ assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>; assigned-clock-rates = <24000000>; - dovdd-supply = <&vreg_l7f_1p8>; + dovdd-supply = <&vreg_l7f_1p8>; avdd-supply = <&vdc_5v>; dvdd-supply = <&vdc_5v>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 4501c00d12..cd0db4f31d 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -23,6 +23,7 @@ aliases { serial0 = &uart12; + serial1 = &uart6; sdhc2 = &sdhc_2; }; @@ -1263,6 +1264,14 @@ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + bt_en_state: bt-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; + lt9611_irq_pin: lt9611-irq-state { pins = "gpio63"; function = "gpio"; @@ -1296,6 +1305,26 @@ }; }; +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,qca6390-bt"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_s4a_1p8>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddaon-supply = <&vreg_s6a_0p95>; + vddrfa0p9-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + }; +}; + &uart12 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 9760bb4b46..26ad05bd3b 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -461,6 +461,11 @@ "ANALOG_PON_OPT"; }; +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &pmm8654au_1_gpios { gpio-line-names = "PMIC_C_ID0", "PMIC_C_ID1", diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 1274dcda22..a7eaca33d3 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -1487,6 +1487,11 @@ }; }; + rng: rng@10d2000 { + compatible = "qcom,sa8775p-trng", "qcom,trng"; + reg = <0 0x010d2000 0 0x1000>; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x0 0x01d84000 0x0 0x3000>; @@ -1910,6 +1915,50 @@ interrupt-controller; }; + tsens2: thermal-sensor@c251000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c251000 0x0 0x1ff>, + <0x0 0x0c224000 0x0 0x8>; + interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <13>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c252000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c252000 0x0 0x1ff>, + <0x0 0x0c225000 0x0 0x8>; + interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <13>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c263000 0x0 0x1ff>, + <0x0 0x0c222000 0x0 0x8>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <12>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c265000 0x0 0x1ff>, + <0x0 0x0c223000 0x0 0x8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <12>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-management@c300000 { compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -1920,6 +1969,11 @@ #clock-cells = <0>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x1100>, @@ -2401,6 +2455,1058 @@ }; }; + thermal-zones { + aoss-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-3-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camss-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + pcie-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-0-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-3-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camss-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + pcie-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-0-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss-2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-3-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + ddrss-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-1-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 12>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss-3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-3-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + ddrss-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-1-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 12>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + arch_timer: timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, @@ -2409,7 +3515,7 @@ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; - pcie0: pci@1c00000{ + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sa8775p"; reg = <0x0 0x01c00000 0x0 0x3000>, <0x0 0x40000000 0x0 0xf20>, @@ -2509,7 +3615,7 @@ status = "disabled"; }; - pcie1: pci@1c10000{ + pcie1: pcie@1c10000 { compatible = "qcom,pcie-sa8775p"; reg = <0x0 0x01c10000 0x0 0x3000>, <0x0 0x60000000 0x0 0xf20>, diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index 3342cb0480..5afcb8212f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -3,6 +3,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7180.dtsi" @@ -129,6 +130,113 @@ pinctrl-names = "default"; }; + sound: sound { + compatible = "qcom,sc7180-qdsp6-sndcard"; + pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>; + pinctrl-names = "default"; + model = "Acer-Aspire-1"; + + audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + multimedia1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + multimedia2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + multimedia3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + multimedia4-dai-link { + link-name = "MultiMedia4"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + primary-rx-dai-link { + link-name = "Primary MI2S Playback"; + + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&alc5682 0>; + }; + }; + + primary-tx-dai-link { + link-name = "Primary MI2S Capture"; + + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&alc5682 0>; + }; + }; + + tertiary-rx-dai-link { + link-name = "Tertiary MI2S Playback"; + + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&max98357a>; + }; + }; + + displayport-rx-dai-link { + link-name = "DisplayPort Playback"; + + cpu { + sound-dai = <&q6afedai DISPLAY_PORT_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + }; + reg_tp_3p3: touchpad-regulator { compatible = "regulator-fixed"; regulator-name = "tp_3p3"; @@ -364,6 +472,49 @@ status = "disabled"; }; +&pm6150_rtc { + status = "okay"; +}; + +&q6afedai { + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; + + dai@17 { + reg = <PRIMARY_MI2S_TX>; + qcom,sd-lines = <0>; + }; + + dai@20 { + reg = <TERTIARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + + dai@104 { + reg = <DISPLAY_PORT_RX>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -372,6 +523,12 @@ status = "okay"; }; +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn"; + status = "okay"; +}; + &remoteproc_mpss { firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 0be62331f9..067813f5f4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -141,7 +141,7 @@ ap_ts_pen_1v8: &i2c4 { }; &panel { - compatible = "kingdisplay,kd116n21-30nv-a010"; + compatible = "edp-panel"; }; &pen_insert { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 46aaeba286..ebe3767810 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -943,6 +943,8 @@ ap_spi_fp: &spi10 { vddrf-supply = <&pp1300_l2c>; vddch0-supply = <&pp3300_l10c>; max-speed = <3200000>; + + qcom,local-bd-address-broken; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 5b7ffe2081..4dcaa15cae 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3100,8 +3100,12 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x2>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 5d462ae14b..c4d00a81da 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -17,6 +17,9 @@ * required by the setup for Chrome boards. */ +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_zap_mem; +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &xbl_mem; /delete-node/ &reserved_xbl_uefi_log; @@ -24,11 +27,6 @@ / { reserved-memory { - adsp_mem: memory@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - camera_mem: memory@8ad00000 { reg = <0x0 0x8ad00000 0x0 0x500000>; no-map; @@ -38,11 +36,6 @@ reg = <0x0 0x8b200000 0x0 0x500000>; no-map; }; - - wpss_mem: memory@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; - no-map; - }; }; }; @@ -94,9 +87,31 @@ }; }; +/* Currently not used */ +&remoteproc_cdsp { + /delete-property/ memory-region; +}; + &remoteproc_wpss { - status = "okay"; + compatible = "qcom,sc7280-wpss-pil"; + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", + "ahb", + "rscp", + "xo"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_1 0x17000>; + firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; + + status = "okay"; }; &scm { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi index 95505549ad..b721a85468 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -8,11 +8,6 @@ / { reserved-memory { - mpss_mem: memory@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - mba_mem: memory@9c700000 { reg = <0x0 0x9c700000 0x0 0x200000>; no-map; @@ -33,6 +28,8 @@ &remoteproc_mpss { compatible = "qcom,sc7280-mss-pil"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_OFFLINE_AXI_CLK>, diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi index 2febd6126d..3ebc915f0d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi @@ -7,5 +7,6 @@ /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */ +/delete-node/ &mpss_mem; /delete-node/ &remoteproc_mpss; /delete-node/ &rmtfs_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 2ff549f4dc..a0059527d9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -499,6 +499,25 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p9>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index e456c9512f..46545cd696 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -91,68 +92,93 @@ #size-cells = <2>; ranges; - wlan_ce_mem: memory@4cd000 { + wlan_ce_mem: wlan-ce@4cd000 { no-map; reg = <0x0 0x004cd000 0x0 0x1000>; }; - hyp_mem: memory@80000000 { + hyp_mem: hyp@80000000 { reg = <0x0 0x80000000 0x0 0x600000>; no-map; }; - xbl_mem: memory@80600000 { + xbl_mem: xbl@80600000 { reg = <0x0 0x80600000 0x0 0x200000>; no-map; }; - aop_mem: memory@80800000 { + aop_mem: aop@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; }; - aop_cmd_db_mem: memory@80860000 { + aop_cmd_db_mem: aop-cmd-db@80860000 { reg = <0x0 0x80860000 0x0 0x20000>; compatible = "qcom,cmd-db"; no-map; }; - reserved_xbl_uefi_log: memory@80880000 { + reserved_xbl_uefi_log: xbl-uefi-res@80880000 { reg = <0x0 0x80884000 0x0 0x10000>; no-map; }; - sec_apps_mem: memory@808ff000 { + sec_apps_mem: sec-apps@808ff000 { reg = <0x0 0x808ff000 0x0 0x1000>; no-map; }; - smem_mem: memory@80900000 { + smem_mem: smem@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; }; - cpucp_mem: memory@80b00000 { + cpucp_mem: cpucp@80b00000 { no-map; reg = <0x0 0x80b00000 0x0 0x100000>; }; - wlan_fw_mem: memory@80c00000 { + wlan_fw_mem: wlan-fw@80c00000 { reg = <0x0 0x80c00000 0x0 0xc00000>; no-map; }; - video_mem: memory@8b200000 { + adsp_mem: adsp@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + video_mem: video@8b200000 { reg = <0x0 0x8b200000 0x0 0x500000>; no-map; }; - ipa_fw_mem: memory@8b700000 { + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; }; - rmtfs_mem: memory@9c900000 { + gpu_zap_mem: zap@8b71a000 { + reg = <0 0x8b71a000 0 0x2000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: wpss@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + rmtfs_mem: rmtfs@9c900000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x9c900000 0x0 0x280000>; no-map; @@ -906,7 +932,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, <0>, <&pcie1_phy>, - <0>, <0>, <0>, + <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", @@ -2035,6 +2061,11 @@ }; }; + rng: rng@10d3000 { + compatible = "qcom,sc7280-trng", "qcom,trng"; + reg = <0 0x010d3000 0 0x1000>; + }; + cnoc2: interconnect@1500000 { reg = <0 0x01500000 0 0x1000>; compatible = "qcom,sc7280-cnoc2"; @@ -2127,7 +2158,7 @@ qcom,smem-state-names = "wlan-smp2p-out"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sc7280"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2242,6 +2273,101 @@ status = "disabled"; }; + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7280-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + + power-domains = <&rpmhpd SC7280_MX>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&apps_smmu 0x4e4 0x0011>, + <&apps_smmu 0x4e6 0x0011>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <16>; + qcom,num-ees = <4>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x4e4 0x0011>, + <&apps_smmu 0x4e4 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7280-ipa"; @@ -2618,6 +2744,10 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_zap_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2625,14 +2755,14 @@ opp-hz = /bits/ 64 <315000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <1804000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x07>; }; opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <4068000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x07>; }; /* Only applicable for SKUs which has 550Mhz as Fmax */ @@ -2647,28 +2777,28 @@ opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <6832000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-608000000 { opp-hz = /bits/ 64 <608000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; opp-peak-kBps = <8368000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; opp-peak-kBps = <8532000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-812000000 { opp-hz = /bits/ 64 <812000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; opp-peak-kBps = <8532000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-840000000 { @@ -2787,8 +2917,7 @@ remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; - reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; + reg = <0 0x04080000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -3411,6 +3540,32 @@ #clock-cells = <1>; #phy-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2: usb@8cf8800 { @@ -3491,8 +3646,77 @@ status = "disabled"; }; + remoteproc_adsp: remoteproc@3700000 { + compatible = "qcom,sc7280-adsp-pas"; + reg = <0 0x03700000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_LCX>, + <&rpmhpd SC7280_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + remoteproc_wpss: remoteproc@8a00000 { - compatible = "qcom,sc7280-wpss-pil"; + compatible = "qcom,sc7280-wpss-pas"; reg = <0 0x08a00000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, @@ -3504,12 +3728,8 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, - <&gcc GCC_WPSS_AHB_CLK>, - <&gcc GCC_WPSS_RSCP_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ahb_bdg", "ahb", - "rscp", "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; power-domains = <&rpmhpd SC7280_CX>, <&rpmhpd SC7280_MX>; @@ -3522,11 +3742,6 @@ qcom,smem-states = <&wpss_smp2p_out 0>; qcom,smem-state-names = "stop"; - resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, - <&pdc_reset PDC_WPSS_SYNC_RESET>; - reset-names = "restart", "pdc_sync"; - - qcom,halt-regs = <&tcsr_1 0x17000>; status = "disabled"; @@ -3668,6 +3883,144 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + remoteproc_cdsp: remoteproc@a300000 { + compatible = "qcom,sc7280-cdsp-pas"; + reg = <0 0x0a300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x11a1 0x0420>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x11a2 0x0420>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x11a3 0x0420>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x11a4 0x0420>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x11a5 0x0420>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x11a6 0x0420>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x11a7 0x0420>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x11a8 0x0420>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x11ab 0x0420>, + <&apps_smmu 0x118b 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x11ac 0x0420>, + <&apps_smmu 0x118c 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x11ad 0x0420>, + <&apps_smmu 0x118d 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x11ae 0x0420>, + <&apps_smmu 0x118e 0x0420>; + }; + }; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -3805,6 +4158,86 @@ #power-domain-cells = <1>; }; + cci0: cci@ac4a000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sc7280-camcc"; reg = <0 0x0ad00000 0 0x10000>; @@ -3859,8 +4292,12 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x900 0x402>; @@ -4310,6 +4747,62 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; + cci0_default: cci0-default-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + dp_hot_plug_det: dp-hot-plug-det-state { pins = "gpio47"; function = "dp_hot"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 3ea07d094b..0c22f3efec 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -452,8 +452,8 @@ }; &pcie3 { - perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie3_default_state>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index a40ef23a2a..bfee60c93c 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -386,12 +386,18 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l10e_2p9: ldo10 { regulator-min-microvolt = <2904000>; regulator-max-microvolt = <2904000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l12e: ldo12 { @@ -531,8 +537,8 @@ }; &pcie1 { - perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie2_default_state>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 6760f6a340..b481c15b25 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sc8180x.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8180x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -1693,7 +1694,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1745,7 +1746,6 @@ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1791,7 +1791,7 @@ status = "disabled"; }; - pcie3: pci@1c08000 { + pcie3: pcie@1c08000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -1843,7 +1843,6 @@ assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1e00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, <0x100 &apps_smmu 0x1e01 0x1>; @@ -1890,7 +1889,7 @@ status = "disabled"; }; - pcie1: pci@1c10000 { + pcie1: pcie@1c10000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c10000 0 0x3000>, <0 0x68000000 0 0xf1d>, @@ -1942,7 +1941,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1989,7 +1987,7 @@ status = "disabled"; }; - pcie2: pci@1c18000 { + pcie2: pcie@1c18000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c18000 0 0x3000>, <0 0x70000000 0 0xf1d>, @@ -2041,7 +2039,6 @@ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; @@ -2127,6 +2124,14 @@ <0 0>, <0 0>; + power-domains = <&gcc UFS_PHY_GDSC>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + status = "disabled"; }; @@ -2636,7 +2641,7 @@ resets = <&gcc GCC_USB30_SEC_BCR>; power-domains = <&gcc USB30_SEC_GDSC>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 40 IRQ_TYPE_LEVEL_HIGH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, <&pdc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", @@ -2696,9 +2701,15 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, - <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; + interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x420>; @@ -2717,11 +2728,15 @@ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>; clock-names = "iface", "bus", "core", - "vsync"; + "vsync", + "rot", + "lut"; assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; assigned-clock-rates = <19200000>; @@ -3128,8 +3143,6 @@ phys = <&edp_phy>; phy-names = "dp"; - #sound-dai-cells = <0>; - operating-points-v2 = <&edp_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>; @@ -3430,10 +3443,12 @@ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sc8180x-apss-shared"; + compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared"; reg = <0x0 0x17c00000 0x0 0x1000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index ffc4406422..41215567b3 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -563,6 +563,8 @@ }; &pcie4 { + max-link-speed = <2>; + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index a993ad15ea..eb657e5449 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -573,6 +573,7 @@ &mdss0_dp3 { compatible = "qcom,sc8280xp-edp"; + /delete-property/ #sound-dai-cells; data-lanes = <0 1 2 3>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index b808151317..2e2126c162 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h> #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> @@ -1773,6 +1774,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_4_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie4_phy>; phy-names = "pciephy"; @@ -1871,6 +1873,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_3B_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie3b_phy>; phy-names = "pciephy"; @@ -1969,6 +1972,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_3A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie3a_phy>; phy-names = "pciephy"; @@ -2070,6 +2074,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_2B_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie2b_phy>; phy-names = "pciephy"; @@ -2168,6 +2173,7 @@ reset-names = "pci"; power-domains = <&gcc PCIE_2A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie2a_phy>; phy-names = "pciephy"; @@ -2634,7 +2640,7 @@ compatible = "qcom,sc8280xp-adsp-pas"; reg = <0 0x03000000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2731,7 +2737,7 @@ status = "disabled"; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03210000 0 0x2000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2807,7 +2813,7 @@ status = "disabled"; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.6.0"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2844,7 +2850,7 @@ #reset-cells = <1>; }; - swr2: soundwire-controller@3330000 { + swr2: soundwire@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, @@ -3450,6 +3456,20 @@ }; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc8280xp-camcc"; + reg = <0 0x0ad00000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss0: display-subsystem@ae00000 { compatible = "qcom,sc8280xp-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -4030,6 +4050,7 @@ sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c440000 { @@ -4391,7 +4412,7 @@ compatible = "qcom,sc8280xp-nsp0-pas"; reg = <0 0x1b300000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, @@ -4522,7 +4543,7 @@ compatible = "qcom,sc8280xp-nsp1-pas"; reg = <0 0x21300000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 775700f78e..513fe5e76b 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -606,9 +606,6 @@ compatible = "qcom,sdm660-bimc"; reg = <0x01008000 0x78000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; }; restart@10ac000 { @@ -620,28 +617,17 @@ compatible = "qcom,sdm660-cnoc"; reg = <0x01500000 0x10000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; }; snoc: interconnect@1626000 { compatible = "qcom,sdm660-snoc"; reg = <0x01626000 0x7090>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; }; anoc2_smmu: iommu@16c0000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x016c0000 0x40000>; - - assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; - assigned-clock-rates = <1000>; - clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; - clock-names = "bus"; #global-interrupts = <2>; #iommu-cells = <1>; @@ -686,16 +672,12 @@ compatible = "qcom,sdm660-a2noc"; reg = <0x01704000 0xc100>; #interconnect-cells = <1>; - clock-names = "bus", - "bus_a", - "ipa", + clock-names = "ipa", "ufs_axi", "aggre2_ufs_axi", "aggre2_usb3_axi", "cfg_noc_usb2_axi"; - clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, - <&rpmcc RPM_SMD_IPA_CLK>, + clocks = <&rpmcc RPM_SMD_IPA_CLK>, <&gcc GCC_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, @@ -706,10 +688,8 @@ compatible = "qcom,sdm660-mnoc"; reg = <0x01745000 0xa010>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a", "iface"; - clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, - <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>, - <&mmcc AHB_CLK_SRC>; + clock-names = "iface"; + clocks = <&mmcc AHB_CLK_SRC>; }; tsens: thermal-sensor@10ae000 { @@ -1186,7 +1166,9 @@ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, <&gcc GCC_BIMC_GFX_CLK>, <&gcc GCC_GPU_BIMC_GFX_CLK>; - clock-names = "iface", "mem", "mem_iface"; + clock-names = "iface", + "mem", + "mem_iface"; #global-interrupts = <2>; #iommu-cells = <1>; @@ -1288,20 +1270,16 @@ <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + <&gcc GCC_USB30_MOCK_UTMI_CLK>; clock-names = "cfg_noc", "core", "iface", "sleep", - "mock_utmi", - "bus"; + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; - assigned-clock-rates = <19200000>, <120000000>, - <19200000>; + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; @@ -2204,10 +2182,9 @@ clocks = <&mmcc MNOC_AHB_CLK>, <&mmcc BIMC_SMMU_AHB_CLK>, - <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, <&mmcc BIMC_SMMU_AXI_CLK>; clock-names = "iface-mm", "iface-smmu", - "bus-mm", "bus-smmu"; + "bus-smmu"; #global-interrupts = <2>; #iommu-cells = <1>; @@ -2324,12 +2301,6 @@ compatible = "qcom,sdm660-gnoc"; reg = <0x17900000 0xe000>; #interconnect-cells = <1>; - /* - * This one apparently features no clocks, - * so let's not mess with the driver needlessly - */ - clock-names = "bus", "bus_a"; - clocks = <&xo_board>, <&xo_board>; }; apcs_glb: mailbox@17911000 { diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 301eca9a4f..057579ae30 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -80,6 +80,10 @@ }; }; +&lpass { + status = "okay"; +}; + &pm8953_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -239,3 +243,18 @@ &usb3_dwc3 { dr_mode = "peripheral"; }; + +&wcnss { + status = "okay"; + + vddpx-supply = <&pm8953_l5>; +}; + +&wcnss_iris { + compatible = "qcom,wcn3680"; + + vddxo-supply = <&pm8953_l7>; + vddrfa-supply = <&pm8953_l19>; + vddpa-supply = <&pm8953_l9>; + vdddig-supply = <&pm8953_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 730c8351bc..4d7b77a231 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -6,6 +6,7 @@ * Copyright (c) 2022, Richard Acayan. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -400,6 +401,30 @@ }; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1353,6 +1378,273 @@ #interrupt-cells = <4>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sdm670-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sdm670-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sdm670-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sdm670-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; @@ -1532,7 +1824,7 @@ }; cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 0a891a0122..1f51732819 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1130,7 +1130,7 @@ vdd-rx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; - swm: swm@c85 { + swm: soundwire@c85 { left_spkr: speaker@0,1 { compatible = "sdw10217201000"; reg = <0 1>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 13d7e088aa..46e25c5382 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -484,6 +485,28 @@ status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + &q6afedai { dai@22 { reg = <QUATERNARY_MI2S_RX>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi index c15d488606..6172cd1539 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -54,7 +54,7 @@ reg = <0x42 0x2>; }; - swm: swm@c85 { + swm: soundwire@c85 { compatible = "qcom,soundwire-v1.3.0"; reg = <0xc85 0x40>; interrupts-extended = <&wcd9340 20>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 93b1582e80..617b17b2d7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -355,6 +355,28 @@ status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + &pm8998_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 88ed543de8..237d404861 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2306,7 +2306,7 @@ }; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, @@ -2405,7 +2405,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sdm845"; reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, @@ -2565,7 +2565,7 @@ <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>; @@ -2595,30 +2595,50 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <75000000 300000000>; + + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; interconnect-names = "ufs-ddr", "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, @@ -2626,16 +2646,9 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -3997,33 +4010,28 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x18c>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x128>, - <0 0x088eb400 0 0x1fc>, - <0 0x088eb800 0 0x218>, - <0 0x088eb600 0 0x70>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; usb_1: usb@a6f8800 { @@ -4123,7 +4131,7 @@ iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 92a812b5f4..47dc42f6e9 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -392,6 +392,8 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-source; }; }; @@ -408,6 +410,8 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c5_hid_active>; + + wakeup-source; }; }; @@ -482,6 +486,8 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c11_hid_active>; + + wakeup-source; }; }; @@ -797,7 +803,7 @@ qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - swm: swm@c85 { + swm: soundwire@c85 { left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index 5438373160..26217836c2 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -658,7 +658,7 @@ qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - swm: swm@c85 { + swm: soundwire@c85 { left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index a14e0650c4..f76e72fb20 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -250,6 +250,11 @@ stdout-path = "serial0:115200n8"; }; +&pm7550ba_eusb2_repeater { + vdd18-supply = <&vreg_l5b_1p776>; + vdd3-supply = <&vreg_l10b_3p08>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -261,3 +266,27 @@ &uart1 { status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4b_0p88>; + vdda12-supply = <&vreg_l1b_1p2>; + + phys = <&pm7550ba_eusb2_repeater>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index e180aa4023..7dbdf8ca6d 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,sdx75.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -203,6 +205,19 @@ }; }; + clk_virt: interconnect-0 { + compatible = "qcom,sdx75-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sdx75-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x0>; @@ -434,6 +449,9 @@ clock-names = "m-ahb", "s-ahb"; iommus = <&apps_smmu 0xe3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -444,6 +462,12 @@ reg = <0x0 0x00984000 0x0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&qupv3_se1_2uart_active>; pinctrl-1 = <&qupv3_se1_2uart_sleep>; @@ -453,12 +477,144 @@ }; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x00ff4000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + + status = "disabled"; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx75-qmp-usb3-uni-phy"; + reg = <0x0 0x00ff6000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB2_CLKREF_EN>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + system_noc: interconnect@1640000 { + compatible = "qcom,sdx75-system-noc"; + reg = <0x0 0x01640000 0x0 0x4b400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect@16c0000 { + compatible = "qcom,sdx75-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x14200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; #hwlock-cells = <1>; }; + usb: usb@a6f8800 { + compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + status = "disabled"; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x80 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, + <&usb_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sdx75-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, @@ -733,6 +889,20 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + dc_noc: interconnect@190e0000 { + compatible = "qcom,sdx75-dc-noc"; + reg = <0x0 0x190e0000 0x0 0x8200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sdx75-gem-noc"; + reg = <0x0 0x19100000 0x0 0x34080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts index 00a1c81ca3..866e937835 100644 --- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts @@ -10,9 +10,23 @@ model = "Qualcomm Technologies, Inc. SM4450 QRD"; compatible = "qcom,sm4450-qrd", "qcom,sm4450"; - aliases { }; + aliases { + serial0 = &uart7; + }; chosen { - bootargs = "console=hvc0"; + stdout-path = "serial0:115200n8"; }; }; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */ +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index c4e5b33f51..3e7ae3bebb 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -3,8 +3,11 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm4450-gcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> / { interrupt-parent = <&intc>; @@ -328,6 +331,18 @@ }; }; + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_cmd_db_mem: cmd-db@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -335,6 +350,43 @@ dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; + gcc: clock-controller@100000 { + compatible = "qcom,sm4450-gcc"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + uart7: serial@a88000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + status = "disabled"; + }; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -351,6 +403,32 @@ interrupt-controller; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm4450-tlmm"; + reg = <0x0 0x0f100000 0x0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 137>; + wakeup-parent = <&pdc>; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio23"; + function = "qup1_se2_l2"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio22"; + function = "qup1_se2_l2"; + drive-strength = <2>; + bias-disable; + }; + }; + intc: interrupt-controller@17200000 { compatible = "arm,gic-v3"; reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ @@ -419,6 +497,35 @@ status = "disabled"; }; }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm4450-rpmh-clk"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + }; + }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 87cbc4e8b1..d33763d092 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -10,6 +10,8 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,rpm-icc.h> +#include <dt-bindings/interconnect/qcom,sm6115.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -264,6 +266,8 @@ scm: scm { compatible = "qcom,scm-sm6115", "qcom,scm"; #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; }; }; @@ -273,6 +277,25 @@ reg = <0 0x80000000 0 0>; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -866,6 +889,43 @@ status = "disabled"; }; + system_noc: interconnect@1880000 { + compatible = "qcom,sm6115-snoc"; + reg = <0x0 0x01880000 0x0 0x5f080>; + clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>; + clock-names = "cpu_axi", + "ufs_axi", + "usb_axi", + "ipa"; + #interconnect-cells = <2>; + + clk_virt: interconnect-clk { + compatible = "qcom,sm6115-clk-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,sm6115-mmrt-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,sm6115-mmnrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,sm6115-cnoc"; + reg = <0x0 0x01900000 0x0 0x6200>; + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>; + clock-names = "usb_axi"; + #interconnect-cells = <2>; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>; @@ -890,6 +950,60 @@ clock-names = "core"; }; + pmu@1b8e300 { + compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG + &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, @@ -919,6 +1033,12 @@ #thermal-sensor-cells = <1>; }; + bimc: interconnect@4480000 { + compatible = "qcom,sm6115-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x0 0x045f0000 0x0 0x7000>; @@ -946,8 +1066,42 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + bus-width = <8>; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; }; sdhc_2: mmc@4784000 { @@ -968,6 +1122,12 @@ operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0x00a0 0x0>; resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; bus-width = <4>; qcom,dll-config = <0x0007642c>; @@ -980,11 +1140,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -994,7 +1158,7 @@ reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <1>; #reset-cells = <1>; @@ -1035,24 +1199,17 @@ ufs_mem_phy: phy@4807000 { compatible = "qcom,sm6115-qmp-ufs-phy"; - reg = <0x0 0x04807000 0x0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0x0 0x04807000 0x0 0x1000>; clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; clock-names = "ref", "ref_aux"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@4807400 { - reg = <0x0 0x04807400 0x0 0x098>, - <0x0 0x04807600 0x0 0x130>, - <0x0 0x04807c00 0x0 0x16c>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; gpi_dma0: dma-controller@4a00000 { @@ -1098,6 +1255,15 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1114,6 +1280,15 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1130,6 +1305,15 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1146,6 +1330,15 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1162,6 +1355,15 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1178,6 +1380,15 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1194,6 +1405,15 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1210,11 +1430,37 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + uart3: serial@4a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a90000 0x0 0x4000>; @@ -1226,6 +1472,15 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1242,6 +1497,15 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1253,6 +1517,12 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1267,6 +1537,15 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1283,6 +1562,15 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1314,7 +1602,14 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; - qcom,select-utmi-as-pipe-clk; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; + status = "disabled"; usb_dwc3: usb@4e00000 { @@ -1485,6 +1780,13 @@ iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + #address-cells = <2>; #size-cells = <2>; ranges; @@ -2573,54 +2875,54 @@ compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0f120000 0x0 0x1000>; #address-cells = <2>; - #size-cells = <2>; - ranges; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x0 0x20000000>; clock-frequency = <19200000>; frame@f121000 { - reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>; + reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>; frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; frame@f123000 { - reg = <0x0 0x0f123000 0x0 0x1000>; + reg = <0x0 0x0f123000 0x1000>; frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f124000 { - reg = <0x0 0x0f124000 0x0 0x1000>; + reg = <0x0 0x0f124000 0x1000>; frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f125000 { - reg = <0x0 0x0f125000 0x0 0x1000>; + reg = <0x0 0x0f125000 0x1000>; frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f126000 { - reg = <0x0 0x0f126000 0x0 0x1000>; + reg = <0x0 0x0f126000 0x1000>; frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f127000 { - reg = <0x0 0x0f127000 0x0 0x1000>; + reg = <0x0 0x0f127000 0x1000>; frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f128000 { - reg = <0x0 0x0f128000 0x0 0x1000>; + reg = <0x0 0x0f128000 0x1000>; frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 6464e144c2..7532107580 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1142,7 +1142,7 @@ <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -1187,10 +1187,7 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm6350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; clock-names = "ref", "ref_aux"; @@ -1200,16 +1197,9 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; + #phy-cells = <0>; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x128>, - <0 0x01d87600 0 0x1fc>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x128>, - <0 0x01d87a00 0 0x1fc>; - #phy-cells = <0>; - }; + status = "disabled"; }; ipa: ipa@1e40000 { @@ -1259,7 +1249,7 @@ compatible = "qcom,sm6350-adsp-pas"; reg = <0 0x03000000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -1519,7 +1509,7 @@ compatible = "qcom,sm6350-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index b2f1bb1d58..cca2c2eb88 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -80,6 +80,15 @@ }; }; + touch_avdd: touch-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "touch_avdd"; + gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_avdd_default>; + enable-active-high; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -136,9 +145,10 @@ interrupts = <22 0x2008>; vdd-supply = <&pm6125_l13>; + avdd-supply = <&touch_avdd>; pinctrl-names = "default"; - pinctrl-0 = <&ts_int_default &ts_avdd_default>; + pinctrl-0 = <&ts_int_default>; }; }; @@ -187,6 +197,11 @@ status = "okay"; }; +&remoteproc_mss { + firmware-name = "qcom/sm6375/Sony/murray/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -238,8 +253,8 @@ }; pm6125_l7: l7 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; }; pm6125_l8: l8 { @@ -306,7 +321,7 @@ pm6125_l21: l21 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; + regulator-max-microvolt = <3312000>; }; pm6125_l22: l22 { @@ -317,7 +332,7 @@ pm6125_l23: l23 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; + regulator-max-microvolt = <3312000>; }; pm6125_l24: l24 { @@ -340,8 +355,8 @@ }; pmr735a_l2: l2 { - regulator-min-microvolt = <352000>; - regulator-max-microvolt = <796000>; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <640000>; }; pmr735a_l3: l3 { @@ -412,7 +427,7 @@ pins = "gpio59"; function = "gpio"; drive-strength = <8>; - output-high; + output-low; }; }; @@ -425,6 +440,18 @@ }; &usb_1_hsphy { + vdda-pll-supply = <&pm6125_l7>; + vdda18-supply = <&pm6125_l10>; + vdda33-supply = <&pmr735a_l7>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pmr735a_l2>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l2>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + vdd-3.3-ch1-supply = <&pm6125_l21>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index e56f7ea4eb..a74472ac61 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -916,6 +916,36 @@ drive-strength = <6>; bias-disable; }; + + qup_uart1_default: qup-uart1-default-state { + cts-pins { + pins = "gpio61"; + function = "qup01"; + drive-strength = <2>; + bias-pull-down; + }; + + rts-pins { + pins = "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio63"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio64"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1400000 { @@ -1138,6 +1168,19 @@ status = "disabled"; }; + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; @@ -1516,7 +1559,7 @@ compatible = "qcom,sm6375-adsp-pas"; reg = <0 0x0a400000 0 0x100>; - interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index f4c6e1309a..de670b407e 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -7,6 +7,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/usb/pd.h> #include "sm8150.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -54,6 +55,17 @@ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; }; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; }; &apps_rsc { @@ -363,15 +375,210 @@ status = "okay"; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + &gpu { - /* - * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it - * after display support is added on this board. - */ - compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; +&i2c4 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pm8150b_typec_sbu_out>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_s4a_1p8>; + vcc-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l3c_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p875>; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l3c_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l5a_0p875>; + status = "okay"; +}; + +&pm8150b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + status = "okay"; +}; + +&pm8150b_typec { + status = "okay"; + + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | + PDO_FIXED_DATA_SWAP)>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pm8150b_typec_mux_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pm8150b_typec_sbu_out: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -382,6 +589,10 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; @@ -406,6 +617,13 @@ &tlmm { gpio-reserved-ranges = <0 4>, <126 4>; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio9"; + function = "gpio"; + bias-disable; + }; + }; &uart2 { @@ -450,6 +668,19 @@ status = "okay"; vdda-phy-supply = <&vreg_l3c_1p2>; vdda-pll-supply = <&vreg_l18a_0p8>; + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pm8150b_typec_mux_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &usb_2_qmpphy { @@ -467,7 +698,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pm8150b_role_switch_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_2_dwc3 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 2678eac1ec..2abd4c87a3 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1824,7 +1824,7 @@ <0x0 0x010ad000 0x0 0x3000>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8150"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1915,7 +1915,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8150"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2016,7 +2016,7 @@ <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2061,10 +2061,8 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8150-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, @@ -2074,16 +2072,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -3444,37 +3436,56 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8150-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x200>, - <0 0x088eb400 0 0x200>, - <0 0x088eb800 0 0x800>, - <0 0x088eb600 0 0x200>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; sdhc_2: mmc@8804000 { @@ -3586,6 +3597,25 @@ snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -3637,7 +3667,7 @@ iommus = <&apps_smmu 0x160 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -3716,6 +3746,13 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -3743,6 +3780,86 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8150-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0x0ae90a00 0 0x600>, + <0 0x0ae91000 0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 85e5cf3dc9..946365f15a 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/arm/qcom,ids.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/usb/pd.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -23,7 +24,7 @@ /delete-node/ &xbl_aop_mem; / { - classis-type = "tablet"; + chassis-type = "tablet"; /* required for bootloader to select correct board */ qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */ @@ -114,7 +115,7 @@ }; reserved-memory { - xbl_aop_mem: xbl-aop@80700000 { + xbl_aop_mem: xbl-aop@80600000 { reg = <0x0 0x80600000 0x0 0x260000>; no-map; }; @@ -627,6 +628,41 @@ }; }; +&pm8150b_typec { + vdd-pdphy-supply = <&vreg_l2a_3p1>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | + PDO_FIXED_DATA_SWAP)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_role_switch_out>; + }; + }; + }; + }; +}; + +&pm8150b_vbus { + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -664,11 +700,12 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; maximum-speed = "high-speed"; /* Remove USB3 phy */ phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; + usb-role-switch; }; &usb_1_hsphy { @@ -678,6 +715,10 @@ status = "okay"; }; +&usb_1_role_switch_out { + remote-endpoint = <&pm8150b_role_switch_in>; +}; + &ufs_mem_hc { vcc-supply = <&vreg_l17a_3p0>; vcc-max-microamp = <800000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts new file mode 100644 index 0000000000..86e1f7fd1c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/* + * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/* + * Delete following upstream (sm8250.dtsi) reserved + * memory mappings which are different on this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_secure_heap; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &xbl_aop_mem; + +/ { + + model = "Xiaomi Pad 6"; + compatible = "xiaomi,pipa", "qcom,sm8250"; + + chassis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 0x2300000>; + width = <1800>; + height = <2880>; + stride = <(1800 * 4)>; + format = "a8r8g8b8"; + }; + }; + + battery_l: battery-l { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16700000>; + charge-full-design-microamp-hours = <4420000>; + }; + + battery_r: battery-r { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16700000>; + charge-full-design-microamp-hours = <4420000>; + }; + + bl_vddpos_5p5: bl-vddpos-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddpos_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + bl_vddneg_5p5: bl-vddneg-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddneg_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + xbl_aop_mem: xbl-aop@80700000 { + reg = <0x0 0x80600000 0x0 0x260000>; + no-map; + }; + + slpi_mem: slpi@88c00000 { + reg = <0x0 0x88c00000 0x0 0x2f00000>; + no-map; + }; + + adsp_mem: adsp@8bb00000 { + reg = <0x0 0x8bb00000 0x0 0x2500000>; + no-map; + }; + + spss_mem: spss@8e000000 { + reg = <0x0 0x8e000000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: cdsp-secure-heap@8e100000 { + reg = <0x0 0x8e100000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: cont-splash@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + record-size = <0x1000>; + console-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p88: ldo14 { + regulator-name = "vreg_l14a_1p88"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p35>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p35: smps8 { + regulator-name = "vreg_s8c_1p35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p35>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn"; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_r>; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + status = "okay"; + + backlight: backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_l>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d59a99ca87..b07a3bad6e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -671,6 +671,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8250", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; #reset-cells = <1>; }; }; @@ -2123,7 +2124,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -2227,7 +2228,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2328,7 +2329,7 @@ status = "disabled"; }; - pcie2: pci@1c10000 { + pcie2: pcie@1c10000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, @@ -2434,7 +2435,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2463,29 +2464,48 @@ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <37500000 300000000>, - <0 0>, - <0 0>, - <37500000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; + + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>; interconnect-names = "ufs-ddr", "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-37500000 { + opp-hz = /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, @@ -2493,16 +2513,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -2543,6 +2557,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8250-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; @@ -2565,7 +2584,7 @@ status = "disabled"; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; @@ -2631,7 +2650,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { reg = <0 0x03210000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; status = "disabled"; @@ -2678,7 +2697,7 @@ }; /* tx macro */ - swr2: soundwire-controller@3230000 { + swr2: soundwire@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -3006,7 +3025,7 @@ compatible = "qcom,sm8250-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3710,7 +3729,7 @@ compatible = "qcom,sm8250-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3873,32 +3892,26 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8250-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x200>, - <0 0x088eb400 0 0x200>, - <0 0x088eb800 0 0x800>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; sdhc_2: mmc@8804000 { @@ -4125,6 +4138,7 @@ "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + wakeup-source; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -4193,6 +4207,7 @@ "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; + wakeup-source; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -4207,7 +4222,7 @@ iommus = <&apps_smmu 0x20 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -5872,7 +5887,7 @@ compatible = "qcom,sm8250-adsp-pas"; reg = <0 0x17300000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a72f3c4700..e78c83a897 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -289,6 +289,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8350", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; #reset-cells = <1>; }; }; @@ -677,9 +678,9 @@ <0>, <0>, <0>, - <&ufs_mem_phy_lanes 0>, - <&ufs_mem_phy_lanes 1>, - <&ufs_mem_phy_lanes 2>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -1498,7 +1499,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8350"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1591,7 +1592,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8350"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -1679,7 +1680,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -1723,10 +1724,8 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, @@ -1734,17 +1733,11 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -1818,6 +1811,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8350-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8350-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0 0x20000>, @@ -2238,34 +2236,27 @@ }; }; - usb_2_qmpphy: phy-wrapper@88eb000 { + usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8350-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; + reg = <0 0x088eb000 0 0x2000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - usb_2_ssphy: phy@88ebe00 { - reg = <0 0x088ebe00 0 0x200>, - <0 0x088ec000 0 0x200>, - <0 0x088eb200 0 0x1100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; }; dc_noc: interconnect@90c0000 { @@ -2418,7 +2409,7 @@ iommus = <&apps_smmu 0x20 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -2453,35 +2444,6 @@ #size-cells = <2>; ranges; - dpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* TODO: opp-200000000 should work with - * &rpmhpd_opp_low_svs, but one some of - * sm8350_hdk boards reboot using this - * opp. - */ - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-345000000 { - opp-hz = /bits/ 64 <345000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-460000000 { - opp-hz = /bits/ 64 <460000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - mdss_mdp: display-controller@ae01000 { compatible = "qcom,sm8350-dpu"; reg = <0 0x0ae01000 0 0x8f000>, @@ -2510,6 +2472,35 @@ interrupt-parent = <&mdss>; interrupts = <0>; + dpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-200000000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index ff346be5c9..31e74160b8 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -580,6 +580,14 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8450/a730_zap.mbn"; + }; +}; + &i2c9 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 9d06fb0d4d..b72a48c1d3 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/clock/qcom,sm8450-dispcc.h> +#include <dt-bindings/clock/qcom,sm8450-gpucc.h> #include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> @@ -18,6 +19,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,sm8450.h> +#include <dt-bindings/reset/qcom,sm8450-gpucc.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> @@ -754,9 +756,9 @@ <&pcie0_phy>, <&pcie1_phy>, <0>, - <&ufs_mem_phy_lanes 0>, - <&ufs_mem_phy_lanes 1>, - <&ufs_mem_phy_lanes 2>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "sleep_clk", @@ -1751,7 +1753,12 @@ }; }; - pcie0: pci@1c00000 { + rng: rng@10c3000 { + compatible = "qcom,sm8450-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8450-pcie0"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1770,12 +1777,8 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - /* - * MSIs for BDF (1:0.0) only works with Device ID 0x5980. - * Hence, the IDs are swapped. - */ - msi-map = <0x0 &gic_its 0x5981 0x1>, - <0x100 &gic_its 0x5980 0x1>; + msi-map = <0x0 &gic_its 0x5980 0x1>, + <0x100 &gic_its 0x5981 0x1>; msi-map-mask = <0xff00>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1860,7 +1863,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8450-pcie1"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -1879,12 +1882,8 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - /* - * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. - * Hence, the IDs are swapped. - */ - msi-map = <0x0 &gic_its 0x5a01 0x1>, - <0x100 &gic_its 0x5a00 0x1>; + msi-map = <0x0 &gic_its 0x5a00 0x1>, + <0x100 &gic_its 0x5a01 0x1>; msi-map-mask = <0xff00>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -2026,6 +2025,206 @@ reg = <0x0 0x1fc0000 0x0 0x30000>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-730.1", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x400>, + <&adreno_smmu 1 0x400>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_micro_code_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-818000000 { + opp-hz = /bits/ 64 <818000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-791000000 { + opp-hz = /bits/ 64 <791000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-734000000 { + opp-hz = /bits/ 64 <734000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-599000000 { + opp-hz = /bits/ 64 <599000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-545000000 { + opp-hz = /bits/ 64 <545000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-492000000 { + opp-hz = /bits/ 64 <492000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-421000000 { + opp-hz = /bits/ 64 <421000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-317000000 { + opp-hz = /bits/ 64 <317000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-285000000 { + opp-hz = /bits/ 64 <285000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b290000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8450-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "gmu", + "hub", + "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8450-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -2161,14 +2360,9 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; #clock-cells = <0>; clock-output-names = "wsa2-mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa2_swr_active>; #sound-dai-cells = <1>; }; @@ -2180,6 +2374,9 @@ clock-names = "iface"; label = "WSA2"; + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2209,14 +2406,8 @@ <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&rx_swr_active>; #sound-dai-cells = <1>; }; @@ -2230,6 +2421,9 @@ qcom,din-ports = <0>; qcom,dout-ports = <5>; + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; @@ -2255,14 +2449,9 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&tx_swr_active>; #sound-dai-cells = <1>; }; @@ -2276,14 +2465,8 @@ <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa_swr_active>; #sound-dai-cells = <1>; }; @@ -2295,6 +2478,9 @@ clock-names = "iface"; label = "WSA"; + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2325,6 +2511,9 @@ clock-names = "iface"; label = "TX"; + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <0>; qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; @@ -2351,8 +2540,6 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "mclk", "macro", "dcodec", "npl"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; #clock-cells = <0>; clock-output-names = "fsgen"; @@ -4134,7 +4321,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -4183,10 +4370,8 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux", "qref"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, @@ -4194,17 +4379,11 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; ice: crypto@1d88000 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 3098bb6b93..a26e169a80 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -10,6 +10,7 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" @@ -510,6 +511,134 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p8>; + vdd-l6-supply = <&vreg_s6g_1p8>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; }; &i2c_master_hub_0 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index ad3d7ac29c..54dfee40d6 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -11,6 +11,7 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" @@ -527,6 +528,126 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_s6g_1p86>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &i2c_master_hub_0 { @@ -585,6 +706,13 @@ }; }; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8550/ipa_fws.mbn"; + status = "okay"; +}; + &gcc { clocks = <&bi_tcxo_div2>, <&sleep_clk>, <&pcie0_phy>, @@ -596,6 +724,14 @@ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; +}; + &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index d7e68e0f57..90acdf16b8 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -334,6 +334,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8550", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x19000>; interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; }; }; @@ -1687,7 +1688,12 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + rng: rng@10c3000 { + compatible = "qcom,sm8550-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pcie@1c00000 { device_type = "pci"; compatible = "qcom,pcie-sm8550"; reg = <0 0x01c00000 0 0x3000>, @@ -1778,7 +1784,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { device_type = "pci"; compatible = "qcom,pcie-sm8550"; reg = <0x0 0x01c08000 0x0 0x3000>, @@ -1989,6 +1995,128 @@ #reset-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-43050a01", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x0>, + <&adreno_smmu 1 0x0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_micro_code_mem>; + }; + + /* Speedbin needs more work on A740+, keep only lower freqs */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-680000000 { + opp-hz = /bits/ 64 <680000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-615000000 { + opp-hz = /bits/ 64 <615000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-475000000 { + opp-hz = /bits/ 64 <475000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + opp-401000000 { + opp-hz = /bits/ 64 <401000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-348000000 { + opp-hz = /bits/ 64 <348000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + opp-295000000 { + opp-hz = /bits/ 64 <295000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b280000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x0>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sm8550-gpucc"; reg = <0 0x03d90000 0 0xa000>; @@ -2000,6 +2128,89 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + ipa: ipa@3f40000 { + compatible = "qcom,sm8550-ipa"; + + iommus = <&apps_smmu 0x4a0 0x0>, + <&apps_smmu 0x4a2 0x0>; + reg = <0 0x3f40000 0 0x10000>, + <0 0x3f50000 0 0x5000>, + <0 0x3e04000 0 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8550-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -2050,13 +2261,9 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; #clock-cells = <0>; clock-output-names = "wsa2-mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa2_swr_active>; #sound-dai-cells = <1>; }; @@ -2068,6 +2275,9 @@ clock-names = "iface"; label = "WSA2"; + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -2096,13 +2306,8 @@ <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&rx_swr_active>; #sound-dai-cells = <1>; }; @@ -2114,18 +2319,21 @@ clock-names = "iface"; label = "RX"; - qcom,din-ports = <0>; - qcom,dout-ports = <10>; + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; - qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; - qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; #address-cells = <2>; #size-cells = <0>; @@ -2141,14 +2349,9 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - - assigned-clock-rates = <19200000>; #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&tx_swr_active>; #sound-dai-cells = <1>; }; @@ -2161,13 +2364,8 @@ <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa_swr_active>; #sound-dai-cells = <1>; }; @@ -2179,6 +2377,9 @@ clock-names = "iface"; label = "WSA"; + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -2208,6 +2409,9 @@ clock-names = "iface"; label = "TX"; + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <0>; qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; @@ -2234,9 +2438,6 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "mclk", "macro", "dcodec"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; - #clock-cells = <0>; clock-output-names = "fsgen"; #sound-dai-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts new file mode 100644 index 0000000000..be133a3d5c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -0,0 +1,727 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 MTP"; + compatible = "qcom,sm8650-mtp", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Speaker Left */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; + + /* WSA8845, Speaker Right */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>, <74 1>; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C + * USB SS -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts new file mode 100644 index 0000000000..b9151c2ddf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 QRD"; + compatible = "qcom,sm8650-qrd", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + serial1 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8650/ipa_fws.mbn"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <162 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>, <74 1>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + vddio-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_l15b_1p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa0p8-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p9-supply = <&vreg_s6c_1p8>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> NB7VPQ904MMUTWG -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi new file mode 100644 index 0000000000..0e4bd83b2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -0,0 +1,6015 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8650-dispcc.h> +#include <dt-bindings/clock/qcom,sm8650-gcc.h> +#include <dt-bindings/clock/qcom,sm8650-gpucc.h> +#include <dt-bindings/clock/qcom,sm8650-tcsr.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,sm8650-gpucc.h> +#include <dt-bindings/soc/qcom,gpr.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0 0>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0 0x100>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x200>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_200>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x300>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_200>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x400>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_400>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x500>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_500>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x600>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_600>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x4"; + reg = <0 0x700>; + + clocks = <&cpufreq_hw 2>; + + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_700>; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <588>; + + qcom,freq-domain = <&cpufreq_hw 2>; + + #cooling-cells = <2>; + + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + SILVER_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <550>; + exit-latency-us = <750>; + min-residency-us = <6700>; + local-timer-stop; + }; + + GOLD_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1300>; + min-residency-us = <8136>; + local-timer-stop; + }; + + GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-plus-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <500>; + exit-latency-us = <1350>; + min-residency-us = <7480>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <750>; + exit-latency-us = <2350>; + min-residency-us = <9144>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8650", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,sm8650-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8650-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0xa0000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, + <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@80000000 { + reg = <0 0x80000000 0 0xe00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm@80e00000 { + reg = <0 0x80e00000 0 0x400000>; + no-map; + }; + + /* Merged xbl_dtlog, xbl_ramdump and aop_image regions */ + xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 { + reg = <0 0x81a00000 0 0x260000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0 0x81c60000 0 0x20000>; + no-map; + }; + + /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */ + aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 { + reg = <0 0x81c80000 0 0x74000>; + no-map; + }; + + /* Secdata region can be reused by apps */ + + smem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0 0x81d00000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi@81f00000 { + reg = <0 0x81f00000 0 0x20000>; + no-map; + }; + + pvmfw_mem: pvmfw@824a0000 { + reg = <0 0x824a0000 0 0x100000>; + no-map; + }; + + global_sync_mem: global-sync@82600000 { + reg = <0 0x82600000 0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0 0x82700000 0 0x100000>; + no-map; + }; + + qdss_mem: qdss@82800000 { + reg = <0 0x82800000 0 0x2000000>; + no-map; + }; + + mpss_dsm_mem: mpss-dsm@86b00000 { + reg = <0 0x86b00000 0 0x4900000>; + no-map; + }; + + mpss_dsm_mem_2: mpss-dsm-2@8b400000 { + reg = <0 0x8b400000 0 0x800000>; + no-map; + }; + + mpss_mem: mpss@8bc00000 { + reg = <0 0x8bc00000 0 0xf400000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 { + reg = <0 0x9b000000 0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@9b080000 { + reg = <0 0x9b080000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@9b090000 { + reg = <0 0x9b090000 0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code@9b09a000 { + reg = <0 0x9b09a000 0 0x2000>; + no-map; + }; + + spss_region_mem: spss@9b0a0000 { + reg = <0 0x9b0a0000 0 0x1e0000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: spu-tz-shared@9b280000 { + reg = <0 0x9b280000 0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: spu-modem-shared@9b2e0000 { + reg = <0 0x9b2e0000 0 0x20000>; + no-map; + }; + + camera_mem: camera@9b300000 { + reg = <0 0x9b300000 0 0x800000>; + no-map; + }; + + video_mem: video@9bb00000 { + reg = <0 0x9bb00000 0 0x800000>; + no-map; + }; + + cvp_mem: cvp@9c300000 { + reg = <0 0x9c300000 0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp@9ca00000 { + reg = <0 0x9ca00000 0 0x1400000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 { + reg = <0 0x9de00000 0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 { + reg = <0 0x9de80000 0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi@9df00000 { + reg = <0 0x9df00000 0 0x4080000>; + no-map; + }; + + rmtfs_mem: rmtfs@d7c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xd7c00000 0 0x400000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + + /* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */ + tz_merged_mem: tz-merged@d8000000 { + reg = <0 0xd8000000 0 0x800000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf@e6440000 { + reg = <0 0xe6440000 0 0x2dd000>; + no-map; + }; + + trust_ui_vm_mem: trust-ui-vm@f3800000 { + reg = <0 0xf3800000 0 0x4400000>; + no-map; + }; + + oem_vm_mem: oem-vm@f7c00000 { + reg = <0 0xf7c00000 0 0x4c00000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0 0xff800000 0 0x600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <435>, <428>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sm8650-gcc"; + reg = <0 0x00100000 0 0x1f4200>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipcc: mailbox@406000 { + compatible = "qcom,sm8650-ipcc", "qcom,ipcc"; + reg = <0 0x00406000 0 0x1000>; + + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0>; + + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_1: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + uart15: serial@89c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart15_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0 0x009c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + clock-names = "s-ahb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00980000 0 0x4000>; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00984000 0 0x4000>; + + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00988000 0 0x4000>; + + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0098c000 0 0x4000>; + + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00990000 0 0x4000>; + + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0xc>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0>; + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; + + iommus = <&apps_smmu 0xa3 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,sm8650-cnoc-main"; + reg = <0 0x01500000 0 0x14080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,sm8650-config-noc"; + reg = <0 0x01600000 0 0x6200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8650-system-noc"; + reg = <0 0x01680000 0 0x1d080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8650-pcie-anoc"; + reg = <0 0x016c0000 0 0x12200>; + + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8650-aggre1-noc"; + reg = <0 0x016e0000 0 0x16400>; + + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8650-aggre2-noc"; + reg = <0 0x01700000 0 0x1e400>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,sm8650-mmss-noc"; + reg = <0 0x01780000 0 0x5b800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + rng: rng@10c3000 { + compatible = "qcom,sm8650-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_0_GDSC>; + + iommu-map = <0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <0>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>, + <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>; + + dma-coherent; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_1_GDSC>; + + iommu-map = <0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <1>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + dma-coherent; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>, + <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + + #dma-cells = <1>; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8650-qmp-ufs-phy"; + reg = <0 0x01d80000 0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <100000000 403000000>, + <0 0>, + <0 0>, + <100000000 403000000>, + <100000000 403000000>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0>; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sm8650-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8650-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0xa0000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8650-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipa: ipa@3f40000 { + compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa"; + + iommus = <&apps_smmu 0x4a0 0x0>, + <&apps_smmu 0x4a2 0x0>; + reg = <0 0x3f40000 0 0x10000>, + <0 0x3f50000 0 0x5000>, + <0 0x3e04000 0 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8650-mpss-pas"; + reg = <0 0x04080000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MSS>; + power-domain-names = "cx", + "mss"; + + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <1>; + + label = "mpss"; + }; + }; + + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + #sound-dai-cells = <1>; + }; + + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <0>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", + "macro", + "dcodec"; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,sm8650-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,sm8650-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3a200>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,sm8650-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + iommus = <&apps_smmu 0x540 0>; + + bus-width = <4>; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae95000 0 0x200>, + <0 0x0ae95200 0 0x280>, + <0 0x0ae95500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae97000 0 0x200>, + <0 0x0ae97200 0 0x280>, + <0 0x0ae97500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@af54000 { + compatible = "qcom,sm8650-dp"; + reg = <0 0xaf54000 0 0x104>, + <0 0xaf54200 0 0xc0>, + <0 0xaf55000 0 0x770>, + <0 0xaf56000 0 0x9c>, + <0 0xaf57000 0 0x9c>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&dp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8650-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8650-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e3000 0 0x154>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x40 0>; + + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8650-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + + interrupt-parent = <&intc>; + + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>, + <138 251 5>, <143 244 4>; + + #interrupt-cells = <2>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c228000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c229000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c22a000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x400000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 211>; + + wakeup-parent = <&pdc>; + + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio66", "gpio67"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio70", "gpio71"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c5_data_clk: hub-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio74", "gpio75"; + function = "i2chub0_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c6_data_clk: hub-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "i2chub0_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c7_data_clk: hub-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio78", "gpio79"; + function = "i2chub0_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c8_data_clk: hub-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio206", "gpio207"; + function = "i2chub0_se8"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c9_data_clk: hub-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "i2chub0_se9"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio60", "gpio61"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio63"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio60", "gpio61", "gpio62"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio3"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio7"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio11"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio15"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio19"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio23"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio27"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart15_default: qup-uart15-default-state { + /* TX, RX */ + pins = "gpio30", "gpio31"; + function = "qup2_se7"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + dma-coherent; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0 0x17100000 0 0x10000>, /* GICD */ + <0 0x17180000 0 0x200000>; /* GICR * 8 */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17140000 0 0x20000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17420000 0 0x1000>; + + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <0>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17a00000 0 0x10000>, + <0 0x17a10000 0 0x10000>, + <0 0x17a20000 0 0x10000>, + <0 0x17a30000 0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&CLUSTER_PD>; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8650-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8650-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>, + <0 0x17d94000 0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2", + "freq-domain3"; + + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2", + "dcvsh-irq-3"; + + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + pmu@24091000 { + compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2086000>; + }; + + opp-1 { + opp-peak-kBps = <2929000>; + }; + + opp-2 { + opp-peak-kBps = <5931000>; + }; + + opp-3 { + opp-peak-kBps = <6515000>; + }; + + opp-4 { + opp-peak-kBps = <7980000>; + }; + + opp-5 { + opp-peak-kBps = <10437000>; + }; + + opp-6 { + opp-peak-kBps = <12157000>; + }; + + opp-7 { + opp-peak-kBps = <14060000>; + }; + + opp-8 { + opp-peak-kBps = <16113000>; + }; + }; + }; + + pmu@240b7400 { + compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b7400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4577000>; + }; + + opp-1 { + opp-peak-kBps = <7110000>; + }; + + opp-2 { + opp-peak-kBps = <9155000>; + }; + + opp-3 { + opp-peak-kBps = <12298000>; + }; + + opp-4 { + opp-peak-kBps = <14236000>; + }; + + opp-5 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,sm8650-gem-noc"; + reg = <0 0x24100000 0 0xc5080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system-cache-controller@25000000 { + compatible = "qcom,sm8650-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc_broadcast_base"; + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8650-adsp-pas"; + reg = <0 0x30000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "adsp"; + + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1043 0x20>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1044 0x20>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1045 0x20>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1046 0x20>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1007 0x40>, + <&apps_smmu 0x1067 0x0>, + <&apps_smmu 0x1087 0x0>; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8650-nsp-noc"; + reg = <0 0x320c0000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8650-cdsp-pas"; + reg = <0 0x32300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <5>; + + label = "cdsp"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "cdsp"; + + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + + iommus = <&apps_smmu 0x1961 0x0>, + <&apps_smmu 0x0c01 0x20>, + <&apps_smmu 0x19c1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + + iommus = <&apps_smmu 0x1962 0x0>, + <&apps_smmu 0x0c02 0x20>, + <&apps_smmu 0x19c2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1963 0x0>, + <&apps_smmu 0x0c03 0x20>, + <&apps_smmu 0x19c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1964 0x0>, + <&apps_smmu 0x0c04 0x20>, + <&apps_smmu 0x19c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1965 0x0>, + <&apps_smmu 0x0c05 0x20>, + <&apps_smmu 0x19c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1966 0x0>, + <&apps_smmu 0x0c06 0x20>, + <&apps_smmu 0x19c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1967 0x0>, + <&apps_smmu 0x0c07 0x20>, + <&apps_smmu 0x19c7 0x0>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + + iommus = <&apps_smmu 0x1968 0x0>, + <&apps_smmu 0x0c08 0x20>, + <&apps_smmu 0x19c8 0x0>; + }; + }; + }; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu2-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsphvx0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss4-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss5-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss6-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss6-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss7-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss7-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts new file mode 100644 index 0000000000..7532d8eca2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. X1E80100 CRD"; + compatible = "qcom,x1e80100-crd", "qcom,x1e80100"; + + aliases { + serial0 = &uart21; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts new file mode 100644 index 0000000000..3112487d2a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. X1E80100 QCP"; + compatible = "qcom,x1e80100-qcp", "qcom,x1e80100"; + + aliases { + serial0 = &uart21; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <33 3>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi new file mode 100644 index 0000000000..5ba7924aa4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -0,0 +1,3526 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,x1e80100-gcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10000>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10100>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10200>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10300>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU8: cpu@20000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20000>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD8>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + + L2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU9: cpu@20100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20100>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD9>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU10: cpu@20200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20200>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD10>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU11: cpu@20300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20300>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD11>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + cluster2 { + core0 { + cpu = <&CPU8>; + }; + + core1 { + cpu = <&CPU9>; + }; + + core2 { + cpu = <&CPU10>; + }; + + core3 { + cpu = <&CPU11>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CLUSTER_C4: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "ret"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <180>; + exit-latency-us = <320>; + min-residency-us = <1000>; + }; + }; + + domain-idle-states { + CLUSTER_CL4: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "l2-ret"; + arm,psci-suspend-param = <0x01000044>; + entry-latency-us = <350>; + exit-latency-us = <500>; + min-residency-us = <2500>; + }; + + CLUSTER_CL5: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "ret-pll-off"; + arm,psci-suspend-param = <0x01000054>; + entry-latency-us = <2200>; + exit-latency-us = <2500>; + min-residency-us = <7000>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-x1e80100", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,x1e80100-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,x1e80100-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD8: power-domain-cpu8 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CPU_PD9: power-domain-cpu9 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CPU_PD10: power-domain-cpu10 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CPU_PD11: power-domain-cpu11 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CLUSTER_PD0: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + }; + + CLUSTER_PD1: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + }; + + CLUSTER_PD2: power-domain-cpu-cluster2 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x800000>; + no-map; + }; + + hyp_elf_package_mem: hyp-elf-package@80800000 { + reg = <0x0 0x80800000 0x0 0x200000>; + no-map; + }; + + ncc_mem: ncc@80a00000 { + reg = <0x0 0x80a00000 0x0 0x400000>; + no-map; + }; + + cpucp_log_mem: cpucp-log@80e00000 { + reg = <0x0 0x80e00000 0x0 0x40000>; + no-map; + }; + + cpucp_mem: cpucp@80e40000 { + reg = <0x0 0x80e40000 0x0 0x540000>; + no-map; + }; + + reserved-region@81380000 { + reg = <0x0 0x81380000 0x0 0x80000>; + no-map; + }; + + tags_mem: tags-region@81400000 { + reg = <0x0 0x81400000 0x0 0x1a0000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@81a00000 { + reg = <0x0 0x81a00000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@81a40000 { + reg = <0x0 0x81a40000 0x0 0x1c0000>; + no-map; + }; + + aop_image_mem: aop-image@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@81c80000 { + reg = <0x0 0x81c80000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: tme-crash-dump@81ca0000 { + reg = <0x0 0x81ca0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@81ce0000 { + reg = <0x0 0x81ce0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@81ce4000 { + reg = <0x0 0x81ce4000 0x0 0x10000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@81cff000 { + reg = <0x0 0x81cff000 0x0 0x1000>; + no-map; + }; + + pdp_ns_shared_mem: pdp-ns-shared@81e00000 { + reg = <0x0 0x81e00000 0x0 0x100000>; + no-map; + }; + + gpu_prr_mem: gpu-prr@81f00000 { + reg = <0x0 0x81f00000 0x0 0x10000>; + no-map; + }; + + tpm_control_mem: tpm-control@81f10000 { + reg = <0x0 0x81f10000 0x0 0x10000>; + no-map; + }; + + usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 { + reg = <0x0 0x81f20000 0x0 0x10000>; + no-map; + }; + + pld_pep_mem: pld-pep@81f30000 { + reg = <0x0 0x81f30000 0x0 0x6000>; + no-map; + }; + + pld_gmu_mem: pld-gmu@81f36000 { + reg = <0x0 0x81f36000 0x0 0x1000>; + no-map; + }; + + pld_pdp_mem: pld-pdp@81f37000 { + reg = <0x0 0x81f37000 0x0 0x1000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0x0 0x82700000 0x0 0x100000>; + no-map; + }; + + xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 { + reg = <0x0 0x82800000 0x0 0xc00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 { + reg = <0x0 0x84b00000 0x0 0x800000>; + no-map; + }; + + spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 { + reg = <0x0 0x85300000 0x0 0x80000>; + no-map; + }; + + adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 { + reg = <0x0 0x866c0000 0x0 0x40000>; + no-map; + }; + + spss_region_mem: spss-region@86700000 { + reg = <0x0 0x86700000 0x0 0x400000>; + no-map; + }; + + adsp_boot_mem: adsp-boot@86b00000 { + reg = <0x0 0x86b00000 0x0 0xc00000>; + no-map; + }; + + video_mem: video@87700000 { + reg = <0x0 0x87700000 0x0 0x700000>; + no-map; + }; + + adspslpi_mem: adspslpi@87e00000 { + reg = <0x0 0x87e00000 0x0 0x3a00000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 { + reg = <0x0 0x8b800000 0x0 0x80000>; + no-map; + }; + + cdsp_mem: cdsp@8b900000 { + reg = <0x0 0x8b900000 0x0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 { + reg = <0x0 0x8d900000 0x0 0x80000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8d9fe000 { + reg = <0x0 0x8d9fe000 0x0 0x2000>; + no-map; + }; + + cvp_mem: cvp@8da00000 { + reg = <0x0 0x8da00000 0x0 0x700000>; + no-map; + }; + + camera_mem: camera@8e100000 { + reg = <0x0 0x8e100000 0x0 0x800000>; + no-map; + }; + + av1_encoder_mem: av1-encoder@8e900000 { + reg = <0x0 0x8e900000 0x0 0x700000>; + no-map; + }; + + reserved-region@8f000000 { + reg = <0x0 0x8f000000 0x0 0xa00000>; + no-map; + }; + + wpss_mem: wpss@8fa00000 { + reg = <0x0 0x8fa00000 0x0 0x1900000>; + no-map; + }; + + q6_wpss_dtb_mem: q6-wpss-dtb@91300000 { + reg = <0x0 0x91300000 0x0 0x80000>; + no-map; + }; + + xbl_sc_mem: xbl-sc@d8000000 { + reg = <0x0 0xd8000000 0x0 0x40000>; + no-map; + }; + + reserved-region@d8040000 { + reg = <0x0 0xd8040000 0x0 0xa0000>; + no-map; + }; + + qtee_mem: qtee@d80e0000 { + reg = <0x0 0xd80e0000 0x0 0x520000>; + no-map; + }; + + ta_mem: ta@d8600000 { + reg = <0x0 0xd8600000 0x0 0x8a00000>; + no-map; + }; + + tags_mem1: tags@e1000000 { + reg = <0x0 0xe1000000 0x0 0x26a0000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0x0 0xff800000 0x0 0x600000>; + no-map; + }; + + smem_mem: smem@ffe00000 { + compatible = "qcom,smem"; + reg = <0x0 0xffe00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,x1e80100-gcc"; + reg = <0 0x00100000 0 0x200000>; + + clocks = <&bi_tcxo_div2>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + + interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0x0>; + + status = "disabled"; + }; + + qupv3_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c16_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c17_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c18_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c19_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c20_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c21: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c21_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart21: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart21_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c22_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c23_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x136 0x0>; + + status = "disabled"; + }; + + qupv3_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x123 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@b00000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00b00000 0 0x60000>; + + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x456 0x0>; + + status = "disabled"; + }; + + qupv3_0: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00bc0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x443 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xb80000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b80000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@b84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b84000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@b84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b84000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@b88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b88000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@b88000 { + compatible = "qcom,geni-spi"; + reg = <0 0xb88000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@b8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b8c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@b8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b8c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@b90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xb90000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@b90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b90000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@b94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b94000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@b94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b94000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@b98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b98000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@b98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b98000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@b9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b9c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@b9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b9c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,x1e80100-cnoc-main"; + reg = <0 0x1500000 0 0x14400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,x1e80100-cnoc-cfg"; + reg = <0 0x1600000 0 0x6600>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,x1e80100-system-noc"; + reg = <0 0x1680000 0 0x1c080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_south_anoc: interconnect@16c0000 { + compatible = "qcom,x1e80100-pcie-south-anoc"; + reg = <0 0x16c0000 0 0xd080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_center_anoc: interconnect@16d0000 { + compatible = "qcom,x1e80100-pcie-center-anoc"; + reg = <0 0x16d0000 0 0x7000>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,x1e80100-aggre1-noc"; + reg = <0 0x16E0000 0 0x14400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,x1e80100-aggre2-noc"; + reg = <0 0x1700000 0 0x1c400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_north_anoc: interconnect@1740000 { + compatible = "qcom,x1e80100-pcie-north-anoc"; + reg = <0 0x1740000 0 0x9080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_center_anoc: interconnect@1750000 { + compatible = "qcom,x1e80100-usb-center-anoc"; + reg = <0 0x1750000 0 0x8800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_north_anoc: interconnect@1760000 { + compatible = "qcom,x1e80100-usb-north-anoc"; + reg = <0 0x1760000 0 0x7080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_south_anoc: interconnect@1770000 { + compatible = "qcom,x1e80100-usb-south-anoc"; + reg = <0 0x1770000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,x1e80100-mmss-noc"; + reg = <0 0x1780000 0 0x5B800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + gem_noc: interconnect@26400000 { + compatible = "qcom,x1e80100-gem-noc"; + reg = <0 0x26400000 0 0x311200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,x1e80100-nsp-noc"; + reg = <0 0x320C0000 0 0xE080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,x1e80100-lpass-ag-noc"; + reg = <0 0x7e40000 0 0xE080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,x1e80100-lpass-lpiaon-noc"; + reg = <0 0x7400000 0 0x19080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,x1e80100-lpass-lpicx-noc"; + reg = <0 0x7430000 0 0x3A200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,x1e80100-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + + qcom,pdc-ranges = <0 480 42>, <42 251 5>, + <47 522 52>, <99 609 32>, + <131 717 12>, <143 816 19>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0 0x0f100000 0 0xf00000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 239>; + wakeup-parent = <&pdc>; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup0_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup0_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup0_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup0_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup0_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup0_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio14", "gpio15"; + function = "qup0_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio54", "gpio55"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk-state { + /* SDA, SCL */ + pins = "gpio84", "gpio85"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c22_data_clk: qup-i2c22-data-clk-state { + /* SDA, SCL */ + pins = "gpio88", "gpio89"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c23_data_clk: qup-i2c23-data-clk-state { + /* SDA, SCL */ + pins = "gpio86", "gpio87"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio7"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio15"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio19"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio23"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio27"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio13"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio14", "gpio15", "gpio12"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio53"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio54", "gpio55", "gpio52"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio67"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio64", "gpio65", "gpio66"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_cs: qup-spi17-cs-state { + pins = "gpio71"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_data_clk: qup-spi17-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio68", "gpio69", "gpio70"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_cs: qup-spi18-cs-state { + pins = "gpio75"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio72", "gpio73", "gpio74"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs-state { + pins = "gpio79"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio76", "gpio77", "gpio78"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs-state { + pins = "gpio83"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_data_clk: qup-spi20-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_cs: qup-spi21-cs-state { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_data_clk: qup-spi21-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio84", "gpio85", "gpio86"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_cs: qup-spi22-cs-state { + pins = "gpio91"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_data_clk: qup-spi22-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio88", "gpio89", "gpio90"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_cs: qup-spi23-cs-state { + pins = "gpio85"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_data_clk: qup-spi23-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio86", "gpio87", "gpio84"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart21_default: qup-uart21-default-state { + /* TX, RX */ + pins = "gpio86", "gpio87"; + function = "qup2_se5"; + drive-strength= <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + }; + + intc: interrupt-controller@17000000 { + compatible = "arm,gic-v3"; + reg = <0 0x17000000 0 0x10000>, /* GICD */ + <0 0x17080000 0 0x480000>; /* GICR * 12 */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17040000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17040000 0 0x40000>; + + msi-controller; + #msi-cells = <1>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@17500000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17500000 0 0x10000>, + <0 0x17510000 0 0x10000>, + <0 0x17520000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,x1e80100-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,x1e80100-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + timer@17800000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17800000 0 0x1000>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0 0x20000000>; + + frame@17801000 { + reg = <0 0x17801000 0x1000>, + <0 0x17802000 0x1000>; + + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <0>; + }; + + frame@17803000 { + reg = <0 0x17803000 0x1000>; + + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17805000 { + reg = <0 0x17805000 0x1000>; + + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17807000 { + reg = <0 0x17807000 0x1000>; + + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17809000 { + reg = <0 0x17809000 0x1000>; + + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1780b000 { + reg = <0 0x1780b000 0x1000>; + + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1780d000 { + reg = <0 0x1780d000 0x1000>; + + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + system-cache-controller@25000000 { + compatible = "qcom,x1e80100-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>, + <0 0x25c00000 0 0x200000>, + <0 0x25e00000 0 0x200000>, + <0 0x26000000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc4_base", + "llcc5_base", + "llcc6_base", + "llcc7_base", + "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index ef3bb835d5..6f133f54de 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -356,12 +356,9 @@ * CVBS and HDMI inputs through SW[49-53] * switches. * - * CVBS is the default selection, link it to - * VIN4 here. + * HDMI is the default selection, leave CVBS + * not connected here. */ - adv7180_out: endpoint { - remote-endpoint = <&vin4_in>; - }; }; }; @@ -374,6 +371,12 @@ interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -423,13 +426,11 @@ * CVBS and HDMI inputs through SW[49-53] * switches. * - * CVBS is the default selection, leave HDMI - * not connected here. + * HDMI is the default selection, link it to + * VIN4 here. */ adv7612_out: endpoint { - pclk-sample = <0>; - hsync-active = <0>; - vsync-active = <0>; + remote-endpoint = <&vin4_in>; }; }; }; @@ -580,8 +581,8 @@ function = "usb0"; }; - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; + vin4_pins: vin4 { + groups = "vin4_data24", "vin4_sync", "vin4_clk"; function = "vin4"; }; }; @@ -729,7 +730,7 @@ }; &vin4 { - pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-0 = <&vin4_pins>; pinctrl-names = "default"; status = "okay"; @@ -737,7 +738,10 @@ ports { port { vin4_in: endpoint { - remote-endpoint = <&adv7180_out>; + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + remote-endpoint = <&adv7612_out>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index f1a5778ef1..cba2fde9dd 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -403,6 +403,12 @@ interrupt-parent = <&gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 405404c084..0608dce92e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -29,6 +29,15 @@ stdout-path = "serial0:115200n8"; }; + d1p8: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3p3: regulator-fixed { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -166,6 +175,12 @@ interrupt-parent = <&gpio1>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1p8>; + dvdd-supply = <&d1p8>; + pvdd-supply = <&d1p8>; + dvdd-3v-supply = <&d3p3>; + bgvdd-supply = <&d1p8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 6c7b29b69d..6315ffa6c1 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -96,6 +96,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + interrupt-parent = <&irqc>; gpio-ranges = <&pinctrl 0 0 152>; clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>; power-domains = <&cpg>; @@ -104,6 +105,77 @@ <&cpg R9A08G045_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@11050000 { + compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x11050000 0 0x10000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0"; + clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>, + <&cpg CPG_MOD R9A08G045_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_IA55_RESETN>; + }; + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; @@ -149,6 +221,44 @@ status = "disabled"; }; + eth0: ethernet@11c30000 { + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>, + <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A08G045_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c40000 { + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; + reg = <0 0x11c40000 0 0x10000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>, + <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A08G045_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@12400000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 33f2ecf424..50ed66d42a 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -163,7 +163,7 @@ }; avb: ethernet@a3300000 { - compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; + compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */ diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 547859c388..4409c47239 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -312,6 +312,7 @@ m25p,fast-read; spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 56ff924539..5e4209d6fb 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -241,6 +241,7 @@ m25p,fast-read; spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index a199de8f8b..d33ab4c887 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -9,18 +9,36 @@ #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> /* - * Signals of SW_CONFIG switches: - * @SW_SD0_DEV_SEL: - * 0 - SD0 is connected to eMMC - * 1 - SD0 is connected to uSD0 card + * On-board switches' states: + * @SW_OFF: switch's state is OFF + * @SW_ON: switch's state is ON */ -#define SW_SD0_DEV_SEL 1 +#define SW_OFF 0 +#define SW_ON 1 + +/* + * SW_CONFIG[x] switches' states: + * @SW_CONFIG2: + * SW_OFF - SD0 is connected to eMMC + * SW_ON - SD0 is connected to uSD0 card + * @SW_CONFIG3: + * SW_OFF - SD2 is connected to SoC + * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC + */ +#define SW_CONFIG2 SW_ON +#define SW_CONFIG3 SW_ON / { compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045"; aliases { mmc0 = &sdhi0; +#if SW_CONFIG3 == SW_OFF + mmc2 = &sdhi2; +#else + eth0 = ð0; + eth1 = ð1; +#endif }; chosen { @@ -43,7 +61,7 @@ enable-active-high; }; -#if SW_SD0_DEV_SEL +#if SW_CONFIG2 == SW_ON vccq_sdhi0: regulator1 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -63,13 +81,76 @@ regulator-always-on; }; #endif + + vcc_sdhi2: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +#if SW_CONFIG3 == SW_ON +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + reg = <7>; + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; }; +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + reg = <7>; + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; +#endif + &extal_clk { clock-frequency = <24000000>; }; -#if SW_SD0_DEV_SEL +#if SW_CONFIG2 == SW_ON /* SD0 slot */ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; @@ -100,7 +181,104 @@ }; #endif +#if SW_CONFIG3 == SW_OFF +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sdhi2>; + bus-width = <4>; + max-frequency = <50000000>; + status = "okay"; +}; +#endif + &pinctrl { +#if SW_CONFIG3 == SW_ON + eth0-phy-irq-hog { + gpio-hog; + gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>; + input; + line-name = "eth0-phy-irq"; + }; +#endif + + eth0_pins: eth0 { + txc { + pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */ + power-source = <1800>; + output-enable; + input-enable; + drive-strength-microamp = <5200>; + }; + + tx_ctl { + pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>; /* ET0_TX_CTL */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(4, 5, 1)>; /* ET0_LINKSTA */ + power-source = <1800>; + }; + }; + +#if SW_CONFIG3 == SW_ON + eth1-phy-irq-hog { + gpio-hog; + gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>; + input; + line-name = "eth1-phy-irq"; + }; +#endif + + eth1_pins: eth1 { + txc { + pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */ + power-source = <1800>; + output-enable; + input-enable; + drive-strength-microamp = <5200>; + }; + + tx_ctl { + pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>; /* ET1_TX_CTL */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */ + <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */ + <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */ + <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */ + <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */ + <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */ + <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ + <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ + <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ + <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */ + <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */ + <RZG2L_PORT_PINMUX(10, 4, 1)>; /* ET1_LINKSTA */ + power-source = <1800>; + }; + }; + sdhi0_pins: sd0 { data { pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; @@ -139,4 +317,26 @@ "SD0_CLK", "SD0_CMD", "SD0_RST#"; power-source = <1800>; }; + + sdhi2_pins: sd2 { + data { + pins = "P11_2", "P11_3", "P12_0", "P12_1"; + input-enable; + }; + + ctrl { + pins = "P11_1"; + input-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */ + <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */ + <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */ + <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */ + <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */ + <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */ + <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */ + }; + }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi index e7073a09ed..2145201372 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -11,6 +11,26 @@ / { aliases { serial0 = &scif0; + mmc1 = &sdhi1; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; }; }; @@ -19,6 +39,38 @@ pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */ <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */ }; + + sdhi1_pins: sd1 { + data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + cd { + pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1-uhs { + data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + cd { + pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ + }; + }; }; &scif0 { @@ -26,3 +78,16 @@ pinctrl-0 = <&scif0_pins>; status = "okay"; }; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <125000000>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index a18f33bf0c..a7b30e11be 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb @@ -78,6 +79,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb @@ -98,14 +101,17 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi index 3429e124d9..5b4e223851 100644 --- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi @@ -7,6 +7,7 @@ / { aliases { + ethernet0 = &gmac; mmc1 = &sdmmc; mmc2 = &sdio; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index c1bbd555f5..0a90a88fc6 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -14,6 +14,7 @@ compatible = "rockchip,px30-evb", "rockchip,px30"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts index 7d4c5324c6..16798eb770 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -13,6 +13,7 @@ compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; aliases { + ethernet0 = &gmac; mmc2 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 20955556b6..9137dd76e7 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -20,7 +20,6 @@ #size-cells = <2>; aliases { - ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index e9810d2f04..b47fe02c33 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -143,6 +143,68 @@ status = "okay"; }; +&gpio0 { + gpio-line-names = + /* GPIO0_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_B0 - B7 */ + "", "", "", "header1-pin3 [GPIO0_B3]", + "header1-pin5 [GPIO0_B4]", "", "", + "header1-pin11 [GPIO0_B7]", + /* GPIO0_C0 - C7 */ + "header1-pin13 [GPIO0_C0]", + "header1-pin15 [GPIO0_C1]", "", "", "", + "", "", "", + /* GPIO0_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_C0 - C7 */ + "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]", + "header1-pin19 [GPIO1_C7]", + /* GPIO1_D0 - D7 */ + "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", + "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2_A0 - A7 */ + "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", + "", "", + "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]", + "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]", + /* GPIO2_B0 - B7 */ + "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]", + "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]", + "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]", + "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]", + /* GPIO2_C0 - C7 */ + "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "", + /* GPIO2_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_B0 - B7 */ + "", "", "header2-pin42 [GPIO3_B2]", + "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]", + "header2-pin39 [GPIO3_B5]", "", "", + /* GPIO3_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index 2ae4bb7d5e..cfc0a87b51 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -20,6 +20,11 @@ #size-cells = <2>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts index 1deef53a4c..c7b1862fca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -9,6 +9,7 @@ compatible = "zkmagic,a95x-z2", "rockchip,rk3318"; aliases { + ethernet0 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts index ce318e05f0..f4d20f29c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts @@ -6,30 +6,16 @@ */ /dts-v1/; -#include "rk3326-odroid-go.dtsi" +#include "rk3326-anbernic-rg351m.dtsi" / { model = "Anbernic RG351M"; compatible = "anbernic,rg351m", "rockchip,rk3326"; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm0 0 1000000 0>; - pwm-names = "enable"; - }; }; -/delete-node/ &builtin_gamepad; -/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */ - &internal_display { compatible = "elida,kd35t133"; iovcc-supply = <&vcc_lcd>; + rotation = <270>; vdd-supply = <&vcc_lcd>; }; - -&pwm0 { - status = "okay"; -}; - -/delete-node/ &rk817_charger; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi new file mode 100644 index 0000000000..b6d041dbed --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi @@ -0,0 +1,478 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + /* + * LED is a tri-state. Driven high it is red, driven low it is + * green, and not driven at all (pin set to input) it is amber. + * Additionally, there is a 2nd LED that is not controllable + * that is on (red) when plugged in to power. + */ + gpio_led: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin>; + + red_green_led: led-0 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; + + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_int"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm0 0 1000000 0>; + pwm-names = "enable"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + internal_display: panel@0 { + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <16>; + i2c-scl-rising-time-ns = <280>; + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + #clock-cells = <1>; + clock-names = "mclk"; + clock-output-names = "rk808-clkout1", "xin32k"; + clocks = <&cru SCLK_I2S1_OUT>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + vcc8-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_logic"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_bl"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc_lcd"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_wifi: LDO_REG9 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + usb_midu: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5400000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_midu"; + }; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; +}; + +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + card-detect-delay = <200>; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + #address-cells = <1>; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "disabled"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&pinctrl { + headphone { + hp_det: hp-det { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + led_pin: led-pin { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dc_det: dc-det { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts new file mode 100644 index 0000000000..c79f7a7b38 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3326-anbernic-rg351m.dtsi" + +/ { + model = "Anbernic RG351V"; + compatible = "anbernic,rg351v", "rockchip,rk3326"; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + + button-vol-down { + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-vol-up { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&internal_display { + compatible = "anbernic,rg351v-panel", "newvision,nv3051d"; + vdd-supply = <&vcc_lcd>; +}; + +&io_domains { + vccio1-supply = <&vccio_sd>; +}; + +&vcc_sd { + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1800000>; +}; + +&vccio_sd { + regulator-max-microvolt = <1800000>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts index 40bf808642..824183e515 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -9,6 +9,7 @@ compatible = "azw,beelink-a1", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index ff6b466e0e..1eef550444 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -11,6 +11,7 @@ compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index 1445b879ac..a4399da7d8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -14,6 +14,7 @@ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; ethernet1 = &rtl8153; mmc0 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index dc83d74045..f20662929c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; ethernet1 = &rtl8153; mmc0 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 5d5d957408..414897a57e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -11,6 +11,7 @@ compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts index 018a3a5075..3cda6c627b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts @@ -21,6 +21,8 @@ compatible = "radxa,rockpi-e", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; + ethernet1 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &emmc; }; @@ -180,6 +182,59 @@ status = "okay"; }; +&gpio0 { + gpio-line-names = + /* GPIO0_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_D0 - D7 */ + "", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_D0 - D7 */ + "", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2_A0 - A7 */ + "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", + "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", + "pin-33 [GPIO2_A6]", "", + /* GPIO2_B0 - B7 */ + "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", + /* GPIO2_C0 - C7 */ + "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", + "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", + "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", + /* GPIO2_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3_A0 - A7 */ + "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", + "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", + /* GPIO3_B0 - B7 */ + "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", + /* GPIO3_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 0a27fa5271..229fe9da9c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -11,6 +11,7 @@ compatible = "pine64,rock64", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index cc8209795c..b6f045069e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -20,6 +20,10 @@ #size-cells = <2>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -27,8 +31,6 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; - ethernet0 = &gmac2io; - ethernet1 = &gmac2phy; }; cpus { @@ -486,7 +488,6 @@ pwm3: pwm@ff1b0030 { compatible = "rockchip,rk3328-pwm"; reg = <0x0 0xff1b0030 0x0 0x10>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -743,11 +744,20 @@ status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { remote-endpoint = <&vop_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; @@ -916,6 +926,8 @@ resets = <&cru SRST_GMAC2IO_A>; reset-names = "stmmaceth"; rockchip,grf = <&grf>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; snps,txpbl = <0x4>; status = "disabled"; }; @@ -938,6 +950,8 @@ reset-names = "stmmaceth"; phy-mode = "rmii"; phy-handle = <&phy>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; snps,txpbl = <0x4>; clock_in_out = "output"; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index e47d1398ae..b48b98c137 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -9,6 +9,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index be06e6e64d..029b8e22e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -12,6 +12,7 @@ compatible = "geekbuying,geekbox", "rockchip,rk3368"; aliases { + ethernet0 = &gmac; mmc0 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 5753e57fd7..8ac8acf408 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -8,6 +8,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index 81d1064fdb..dcee2e2891 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -12,6 +12,7 @@ compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 5589f3db6b..b16b7ca023 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -12,6 +12,7 @@ compatible = "rockchip,r88", "rockchip,rk3368"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a4c5aaf1f4..62af0cb948 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -19,7 +19,10 @@ #size-cells = <2>; aliases { - ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts index 6464ef4d11..173da81fc2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts @@ -15,6 +15,7 @@ compatible = "openailab,eaidk-610", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 3d1e126b55..55eca7a50a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -12,6 +12,7 @@ compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdhci; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index 1ce85a5816..30e4879f32 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -13,6 +13,10 @@ model = "96boards RK3399 Ficus"; compatible = "vamrs,ficus", "rockchip,rk3399"; + aliases { + ethernet0 = &gmac; + }; + chosen { stdout-path = "serial2:1500000n8"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c5db64f3e1..260415d99a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -16,6 +16,7 @@ compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index 0f9cc042d9..1cba1d857c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -70,7 +70,7 @@ &spi0 { status = "okay"; - cr50@0 { + tpm@0 { compatible = "google,cr50"; reg = <0>; interrupt-parent = <&gpio0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index c5e7de60c1..5846a11f0e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -706,7 +706,7 @@ camera: &i2c7 { &spi2 { status = "okay"; - cr50@0 { + tpm@0 { compatible = "google,cr50"; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index 7af27e8216..4a6ab6c2e2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -11,6 +11,7 @@ compatible = "hugsun,x99", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts index 8302e51def..99ac4ed0f1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts @@ -10,6 +10,10 @@ / { model = "Khadas Edge-Captain"; compatible = "khadas,edge-captain", "rockchip,rk3399"; + + aliases { + ethernet0 = &gmac; + }; }; &gmac { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts index f5dcb99dc3..e12e7b4d64 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts @@ -10,6 +10,10 @@ / { model = "Khadas Edge-V"; compatible = "khadas,edge-v", "rockchip,rk3399"; + + aliases { + ethernet0 = &gmac; + }; }; &gmac { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 1eb287a3f8..9e3aec4440 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -19,6 +19,7 @@ compatible = "kobol,helios64", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; spi1 = &spi1; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts index a21ac319f8..cb69e2145f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -15,6 +15,7 @@ compatible = "leez,p710", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 7c5f441a22..b7f1e47978 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -18,6 +18,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index dba4d03bfc..e7551449e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -17,6 +17,7 @@ compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 054c6a4d1a..294eb2de26 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -779,7 +779,6 @@ }; &pcie0 { - bus-scan-delay-ms = <1000>; ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 115c14c0a3..18a98c4648 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "rk3399-puma.dtsi" +#include <dt-bindings/input/input.h> / { model = "Theobroma Systems RK3399-Q7 SoM"; @@ -18,6 +19,38 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&haikou_keys_pin>; + pinctrl-names = "default"; + + button-batlow-n { + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + label = "BATLOW#"; + linux,code = <KEY_BATTERY>; + }; + + button-slp-btn-n { + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; + label = "SLP_BTN#"; + linux,code = <KEY_SLEEP>; + }; + + button-wake-n { + gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>; + label = "WAKE#"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + + switch-lid-btn-n { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + label = "LID_BTN#"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + }; + }; + leds { pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; @@ -165,11 +198,8 @@ }; &pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&haikou_pin_hog>; - - hog { - haikou_pin_hog: haikou-pin-hog { + buttons { + haikou_keys_pin: haikou-keys-pin { rockchip,pins = /* LID_BTN */ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, @@ -177,7 +207,7 @@ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ + /* WAKE# */ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 20e3f41efe..2484ad2bd8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -9,6 +9,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdhci; }; @@ -119,6 +120,20 @@ drive-impedance-ohm = <33>; }; +&gpio0 { + /* + * The BIOS_DISABLE hog is a feedback pin for the actual status of the + * signal. This usually represents the state of a switch on the baseboard. + * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed. + */ + bios-disable-hog { + gpios = <RK_PB0 GPIO_ACTIVE_HIGH>; + gpio-hog; + input; + line-name = "bios_disable"; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; @@ -401,16 +416,22 @@ gpio1830-supply = <&vcc_1v8>; }; -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_1v8>; -}; - -&pwm2 { - status = "okay"; +&pcie_clkreqn_cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; }; &pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&q7_thermal_pin>; + + gpios { + q7_thermal_pin: q7-thermal-pin { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = @@ -443,11 +464,20 @@ usb3 { usb3_id: usb3-id { rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pwm2 { + status = "okay"; +}; + &sdhci { /* * Signal integrity isn't great at 200MHz but 100MHz has proven stable diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index c32913df93..ca7a446b65 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -14,6 +14,7 @@ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 8bfd5f88d1..7baf9d1b22 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -15,6 +15,7 @@ compatible = "radxa,rock-4c-plus", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdhci; mmc1 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index f2279aa6ca..281a121807 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -12,6 +12,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdhci; mmc1 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index bca2b50e0a..f30b82a10c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -11,6 +11,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index e6ac292ce6..b3ef1c85e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -12,6 +12,7 @@ compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; }; @@ -44,7 +45,7 @@ fan0: gpio-fan { #cooling-cells = <2>; compatible = "gpio-fan"; - gpio-fan,speed-map = <0 0 3000 1>; + gpio-fan,speed-map = <0 0>, <3000 1>; gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index da0dfb237f..fe818a2700 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -19,7 +19,11 @@ #size-cells = <2>; aliases { - ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -1952,6 +1956,7 @@ hdmi: hdmi@ff940000 { compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; + reg-io-width = <4>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, @@ -1960,13 +1965,16 @@ <&cru PLL_VPLL>; clock-names = "iahb", "isfr", "cec", "grf", "ref"; power-domains = <&power RK3399_PD_HDCP>; - reg-io-width = <4>; rockchip,grf = <&grf>; #sound-dai-cells = <0>; status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1979,6 +1987,10 @@ remote-endpoint = <&vopl_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; @@ -2114,6 +2126,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; #cooling-cells = <2>; + dynamic-power-coefficient = <2640>; power-domains = <&power RK3399_PD_GPU>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 8b8992a8e9..8823c924dc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -13,6 +13,7 @@ compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; aliases { + ethernet0 = &gmac; mmc0 = &sdhci; mmc1 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts index 1ead3c5c24..0ac64f043b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts @@ -5,67 +5,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pinctrl/rockchip.h> -#include "rk3566-anbernic-rg353x.dtsi" +#include "rk3566-powkiddy-rk2023.dtsi" / { model = "RGB30"; compatible = "powkiddy,rgb30", "rockchip,rk3566"; - - aliases { - mmc1 = &sdmmc0; - mmc2 = &sdmmc1; - mmc3 = &sdmmc2; - }; - - battery: battery { - compatible = "simple-battery"; - charge-full-design-microamp-hours = <3151000>; - charge-term-current-microamp = <300000>; - constant-charge-current-max-microamp = <2000000>; - constant-charge-voltage-max-microvolt = <4250000>; - factory-internal-resistance-micro-ohms = <117000>; - voltage-max-design-microvolt = <4172000>; - voltage-min-design-microvolt = <3400000>; - - ocv-capacity-celsius = <20>; - ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>, - <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>, - <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>, - <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>, - <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>, - <3400000 0>; - }; - - /* - * Channels reversed for speakers. Headphones automatically switch via hardware when - * detected with no ability to control output in software. Headphones appear to be mono - * (each output channel receives all audio). No microphone support on 3.5mm jack. - */ - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "rk817_ext"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Headphone", "Headphones"; - simple-audio-card,routing = - "Headphones", "HPOL", - "Headphones", "HPOR"; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - }; -}; - -/delete-node/ &adc_keys; - -&chosen { - /delete-property/ stdout-path; }; &cru { @@ -75,87 +19,21 @@ <200000000>, <292500000>; }; -&gpio_keys_control { - button-r1 { - gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; - label = "TR"; - linux,code = <BTN_TR>; - }; - - button-r2 { - gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; - label = "TR2"; - linux,code = <BTN_TR2>; - }; -}; - -/delete-node/ &{/i2c@fdd40000/regulator@40}; - -&i2c0 { - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-name = "vdd_cpu"; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc_sys>; - regulator-state-mem { - regulator-off-in-suspend; +&dsi0 { + panel: panel@0 { + compatible = "powkiddy,rgb30-panel"; + reg = <0>; + backlight = <&backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc3v3_lcd0_n>; + iovcc-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; }; }; }; - -/* - * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as - * red_led0 and red_led1. - */ -/delete-node/ &{/pwm-leds/led-1}; -/delete-node/ &{/pwm-leds/led-2}; - -&leds { - red_led0: led-1 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_CHARGING; - max-brightness = <255>; - pwms = <&pwm7 0 25000 0>; - }; - - red_led1: led-2 { - color = <LED_COLOR_ID_RED>; - default-state = "off"; - function = LED_FUNCTION_STATUS; - max-brightness = <255>; - pwms = <&pwm0 0 25000 0>; - }; -}; - -&panel { - compatible = "powkiddy,rgb30-panel"; - vcc-supply = <&vcc3v3_lcd0_n>; - iovcc-supply = <&vcc3v3_lcd0_n>; - /delete-property/ vdd-supply; -}; - -&pwm5 { - status = "disabled"; -}; - -&rk817 { - rk817_charger: charger { - monitored-battery = <&battery>; - rockchip,resistor-sense-micro-ohms = <10000>; - rockchip,sleep-enter-current-microamp = <300000>; - rockchip,sleep-filter-current-microamp = <100000>; - }; -}; - -/* There is no UART header visible on the board for this device. */ -&uart2 { - status = "disabled"; -}; - -/delete-node/ &vibrator; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts new file mode 100644 index 0000000000..ba32d0793d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-powkiddy-rk2023.dtsi" + +/ { + model = "RK2023"; + compatible = "powkiddy,rk2023", "rockchip,rk3566"; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <115200000>; +}; + +&dsi0 { + panel: panel@0 { + compatible = "powkiddy,rk2023-panel", "newvision,nv3051d"; + reg = <0>; + backlight = <&backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi new file mode 100644 index 0000000000..0fa8f06f94 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + aliases { + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; + + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_en>; + pinctrl-names = "default"; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "right_x", "left_y", "right_y"; + #io-channel-cells = <1>; + io-channels = <&saradc 3>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3151000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4250000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>, + <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>, + <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>, + <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>, + <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>, + <3400000 0>; + }; + + gpio_keys_control: gpio-keys-control { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-l1 { + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-left { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-up { + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-vol-down { + gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-vol-up { + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, + <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c5>; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + /* + * Device also includes an always on LED that is wired to the 5V input + * voltage and is on when the device is plugged in. + */ + leds: pwm-leds { + compatible = "pwm-leds"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm6 0 25000 0>; + }; + + red_led: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_CHARGING; + max-brightness = <255>; + pwms = <&pwm7 0 25000 0>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + /* + * Channels reversed for speakers. Headphones automatically switch via hardware when + * detected with no ability to control output in software. Headphones appear to be mono + * (each output channel receives all audio). No microphone support on 3.5mm jack. + */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Headphones"; + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_sys: regulator-vcc-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-name = "vcc_sys"; + }; + + vcc_wifi: regulator-vcc-wifi { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_wifi_h>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-0 = <&hdmitxm0_cec>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4700000>; + regulator-max-microvolt = <5400000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + }; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + pinctrl-names = "default"; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + btn_pins_vol: btn-pins-vol { + rockchip,pins = + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + joy-mux { + joy_mux_en: joy-mux-en { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wifi { + vcc_wifi_h: vcc-wifi-h { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc1v8_dvp>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&usb_host0_xhci { + dr_mode = "peripheral"; + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts new file mode 100644 index 0000000000..4786b19fd0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts @@ -0,0 +1,926 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Powkiddy x55"; + compatible = "powkiddy,x55", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; + mmc3 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 0>, <&saradc 1>, + <&saradc 2>, <&saradc 3>; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <15 1023>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <1023 15>; + linux,code = <ABS_Y>; + }; + + axis@2 { + reg = <2>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@3 { + reg = <3>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <4000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4300000>; + factory-internal-resistance-micro-ohms = <91000>; + voltage-max-design-microvolt = <4138000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>, + <4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>, + <3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>, + <3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>, + <3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>, + <3400000 0>; + }; + + gpio_keys_control: gpio-keys-control { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-l1 { + gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-left { + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-right { + gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-r1 { + gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-up { + gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-voldown { + gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-volup { + gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led: led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + }; + + green_led: led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + }; + + amber_led: led-2 { + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + + }; + + hdmi-con { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c5>; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_det>; + pinctrl-names = "default"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_host_en>; + pinctrl-names = "default"; + regulator-name = "vcc5v0_host"; + vin-supply = <&dcdc_boost>; + }; + + vcc_lcd: regulator-vcc-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_lcd_en>; + pinctrl-names = "default"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_lcd"; + }; + + vcc_sys: regulator-vcc-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-name = "vcc_sys"; + }; + + vcc_wifi: regulator-vcc-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&vcc_wifi_h>; + pinctrl-names = "default"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <126400000>; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel: panel@0 { + compatible = "powkiddy,x55-panel", "himax,hx8394"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>; + rotation = <270>; + vcc-supply = <&vcc_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-0 = <&hdmitxm0_cec>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clocks = <&cru I2S1_MCLKOUT_TX>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-min-microvolt = <4700000>; + regulator-max-microvolt = <5400000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <150000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + + }; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>, + <&i2s1m0_sdo0>; + pinctrl-names = "default"; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-control { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + btn_pins_vol: btn-pins-vol { + rockchip,pins = + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hp-detect { + hp_det: hp-det { + rockchip,pins = + <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = + <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc-lcd { + vcc_lcd_en: vcc-lcd-en { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wifi { + vcc_wifi_h: vcc-wifi-h { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcca1v8_pmu>; + vccio5-supply = <&vcc2v8_dvp>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; +}; + +&pwm4 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, + <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>, + <&sdmmc0_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>, + <&sdmmc2m1_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vqmmc-supply = <&vcc2v8_dvp>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_xhci { + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index 854d02b46e..59843a7a19 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -31,8 +31,9 @@ fan: gpio_fan { compatible = "gpio-fan"; gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 4500 1>; + gpio-fan,speed-map = + < 0 0>, + <4500 1>; pinctrl-names = "default"; pinctrl-0 = <&fan_en_h>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts index 1b1c67d5b1..3ae24e3945 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts @@ -14,6 +14,7 @@ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; aliases { + ethernet0 = &gmac1; mmc1 = &sdmmc0; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 938092fce1..63eea27293 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -12,6 +12,7 @@ compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566"; aliases { + ethernet0 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; mmc2 = &sdmmc1; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts index 4e49bebf54..fdbf1c7832 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts @@ -13,6 +13,10 @@ model = "PINE64 RK3566 SOQuartz on Blade carrier board"; compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566"; + aliases { + ethernet0 = &gmac1; + }; + /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */ vcc3v0_sd: vcc3v0-sd-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts index cddf6cd2fe..6ed3fa4aee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -8,6 +8,10 @@ model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; + aliases { + ethernet0 = &gmac1; + }; + /* labeled +12v in schematic */ vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts index 2208dbfb7f..f2095dfa4e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts @@ -8,6 +8,10 @@ model = "PINE64 RK3566 SOQuartz on Model A carrier board"; compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; + aliases { + ethernet0 = &gmac1; + }; + /* labeled DCIN_12V in schematic */ vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index 63bae36b8f..bfb7b952f4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -12,7 +12,6 @@ compatible = "pine64,soquartz", "rockchip,rk3566"; aliases { - ethernet0 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; mmc2 = &sdmmc1; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index f9127ddfbb..dc5892d25c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -416,6 +416,8 @@ vccio_sd: LDO_REG5 { regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -525,9 +527,9 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7531"; - reg = <0>; + reg = <0x1f>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts new file mode 100644 index 0000000000..a4946cdc3b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "rk3588-coolpi-cm5.dtsi" + +/ { + model = "RK3588 CoolPi CM5 EVB"; + compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588"; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + power-supply = <&vcc12v_dcin>; + pwms = <&pwm2 0 25000 0>; + }; + + leds: leds { + compatible = "gpio-leds"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_lcd: vcc3v3-lcd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd"; + enable-active-high; + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcdpwr_en>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +/* M.2 E-Key */ +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +/* Standard pcie */ +&pcie3x2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +/* M.2 M-Key ssd */ +&pcie3x4 { + num-lanes = <2>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&pinctrl { + lcd { + lcdpwr_en: lcdpwr-en { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bl_en: bl-en { + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + bt_pwron: bt-pwron { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_clkreq: pcie-clkreq { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_rst: pcie-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_pwron: wifi-pwron { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_wake: pcie-wake { + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb_host1>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb_host2>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi new file mode 100644 index 0000000000..94ecb9b4f9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + compatible = "coolpi,pi-cm5", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + serial2 = &uart2; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + avdd0v85_pcie20: avdd0v85-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v85_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + avdd1v8_pcie20: avdd1v8-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd1v8_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + avdd0v75_pcie30: avdd0v75-pcie30-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v75_pcie30"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + vin-supply = <&avdd_0v75_s0>; + }; + + pcie30_avdd1v8: avdd1v8-pcie30-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + pinctrl-names = "default"; + rx_delay = <0x00>; + tx_delay = <0x43>; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@10 { + compatible = "everest,es8316"; + reg = <0x10>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@1 { + /* YT8531C/H */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&yt8531_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + }; +}; + +/* ethernet */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&yt6801_isolate>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + yt6801 { + yt6801_isolate: yt6801-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + yt8531 { + yt8531_rst: yt8531-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_2v0_pldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts index b515438920..be6a4f4f90 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts @@ -12,10 +12,6 @@ compatible = "edgeble,neural-compute-module-6a-io", "edgeble,neural-compute-module-6a", "rockchip,rk3588"; - aliases { - serial2 = &uart2; - }; - chosen { stdout-path = "serial2:1500000n8"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts index 9933765e40..070baeb634 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts @@ -9,13 +9,9 @@ / { model = "Edgeble Neu6B IO Board"; - compatible = "edgeble,neural-compute-module-6b-io", + compatible = "edgeble,neural-compute-module-6a-io", "edgeble,neural-compute-module-6b", "rockchip,rk3588"; - aliases { - serial2 = &uart2; - }; - chosen { stdout-path = "serial2:1500000n8"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index bbbe00bcd1..de30c2632b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -16,8 +16,8 @@ compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588"; aliases { + ethernet0 = &gmac0; mmc0 = &sdhci; - serial2 = &uart2; }; chosen { @@ -56,6 +56,63 @@ }; }; + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "RK3588 EVB1 Audio"; + simple-audio-card,aux-devs = <&_headphone>, <&_speaker>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,pin-switches = "Headphones", "Speaker"; + simple-audio-card,routing = + "Speaker Amplifier INL", "LOUT2", + "Speaker Amplifier INR", "ROUT2", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR", + "Headphones Amplifier INL", "LOUT1", + "Headphones Amplifier INR", "ROUT1", + "Headphones", "Headphones Amplifier OUTL", + "Headphones", "Headphones Amplifier OUTR", + "LINPUT1", "Onboard Microphone", + "RINPUT1", "Onboard Microphone", + "LINPUT2", "Microphone Jack", + "RINPUT2", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones", + "Speaker", "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + amp_headphone: headphone-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone_amplifier_en>; + sound-name-prefix = "Headphones Amplifier"; + }; + + amp_speaker: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_amplifier_en>; + sound-name-prefix = "Speaker Amplifier"; + }; + backlight: backlight { compatible = "pwm-backlight"; power-supply = <&vcc12v_dcin>; @@ -240,6 +297,32 @@ }; }; +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + AVDD-supply = <&avcc_1v8_codec_s0>; + DVDD-supply = <&avcc_1v8_codec_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + &mdio0 { rgmii_phy: ethernet-phy@1 { /* RTL8211F */ @@ -273,6 +356,20 @@ }; &pinctrl { + audio { + hp_detect: headphone-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + headphone_amplifier_en: headphone-amplifier-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + speaker_amplifier_en: speaker-amplifier-en { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + rtl8111 { rtl8111_isolate: rtl8111-isolate { rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts new file mode 100644 index 0000000000..39d65002ad --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -0,0 +1,802 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588.dtsi" + +/ { + model = "Theobroma Systems RK3588-SBC Jaguar"; + compatible = "tsd,rk3588-jaguar", "rockchip,rk3588"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + /* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */ + button-bios-disable { + label = "BIOS_DISABLE"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + aliases { + ethernet0 = &gmac0; + mmc0 = &sdhci; + mmc1 = &sdmmc; + rtc0 = &rtc_twi; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + /* DCIN is 12-24V but standard is 12V */ + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led1_pin>; + + /* LED1 on PCB */ + led-1 { + gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_AMBER>; + }; + }; + + pps { + compatible = "pps-gpio"; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v2_s3: vcc-1v2-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v2_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Exposed on P14 and P15 */ + vcc_2v8_s3: vcc-2v8-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_5v0_usb_a: vcc-5v0-usb-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_a_vcc"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_usbc1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_usbc2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc3v3_mdot2: vcc3v3-mdot2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_mdot2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1_ps { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + phy-supply = <&vcc_1v2_s3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_rx_bus2 + &gmac0_tx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus + ð0_pins + ð_reset>; + tx_delay = <0x10>; + rx_delay = <0x10>; + snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 100000>; + + status = "okay"; +}; + +&gpio1 { + mdot2e-w-disable1-n-hog { + gpios = <RK_PB1 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m.2 E-key W_DISABLE1#"; + gpio-hog; + }; +}; + +&gpio4 { + mdot2e-w-disable2-n-hog { + gpios = <RK_PC1 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m.2 E-key W_DISABLE2#"; + gpio-hog; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1m4_xfer>; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m4_xfer>; +}; + +&i2c7 { + status = "okay"; + + /* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */ + + /* Also on 0x55 */ + eeprom@54 { + compatible = "st,24c04", "atmel,24c04"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <&vcc_3v3_s3>; + }; +}; + +&i2c8 { + pinctrl-0 = <&i2c8m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@6 { + /* KSZ9031 or KSZ9131 */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x6>; + clocks = <&cru REFCLKO25M_ETH0_OUT>; + }; +}; + +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */ + vpcie3v3-supply = <&vcc3v3_mdot2>; + status = "okay"; +}; + +&pinctrl { + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ethernet { + eth_reset: eth-reset { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led1_pin: led1-pin { + rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + mmc-pwrseq = <&emmc_pwrseq>; + no-sdio; + no-sd; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>; + supports-cqe; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdmmc { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-name = "vcca_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-name = "vdda_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-name = "vcca_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdda_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdda_0v75_s0: nldo-reg3 { + regulator-name = "vdda_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-name = "vdda_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc_5v0_usb_a>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +/* Mule-ATtiny debug UART; typically baudrate 9600 */ +&uart0 { + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; + +/* Main debug interface on P20 micro-USB B port and P21 header */ +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* RS485 on P19 */ +&uart3 { + pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* Mule-ATtiny UPDI flashing UART */ +&uart7 { + pinctrl-0 = <&uart7m0_xfer>; + status = "okay"; +}; + +/* host0 on P10 USB-A */ +&usb_host0_ehci { + status = "okay"; +}; + +/* host0 on P10 USB-A */ +&usb_host0_ohci { + status = "okay"; +}; + +/* host1 on M.2 E-key */ +&usb_host1_ehci { + status = "okay"; +}; + +/* host1 on M.2 E-key */ +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts index 97af4f9128..997b516c25 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts @@ -19,7 +19,6 @@ aliases { mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; chosen { @@ -190,19 +189,19 @@ cpu-supply = <&vdd_cpu_lit_s0>; }; -&cpu_b0{ +&cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; -&cpu_b1{ +&cpu_b1 { cpu-supply = <&vdd_cpu_big0_s0>; }; -&cpu_b2{ +&cpu_b2 { cpu-supply = <&vdd_cpu_big1_s0>; }; -&cpu_b3{ +&cpu_b3 { cpu-supply = <&vdd_cpu_big1_s0>; }; @@ -537,13 +536,12 @@ }; &sdmmc { - max-frequency = <200000000>; - no-sdio; - no-mmc; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; + no-mmc; + no-sdio; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; @@ -570,6 +568,8 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + vcc1-supply = <&vcc4v0_sys>; vcc2-supply = <&vcc4v0_sys>; vcc3-supply = <&vcc4v0_sys>; @@ -590,7 +590,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 298c183d6f..e74871491e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -19,7 +19,6 @@ aliases { mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; chosen { @@ -487,6 +486,7 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; spi-max-frequency = <1000000>; + system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; @@ -508,7 +508,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index 5c59f9571d..87a0abf95f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -17,9 +17,9 @@ compatible = "pine64,quartzpro64", "rockchip,rk3588"; aliases { + ethernet0 = &gmac0; mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 741f631db3..a0e303c3a1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -14,7 +14,6 @@ mmc0 = &sdhci; mmc1 = &sdmmc; mmc2 = &sdio; - serial2 = &uart2; }; chosen { @@ -138,6 +137,10 @@ status = "okay"; }; +&combphy2_psu { + status = "okay"; +}; + &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; @@ -423,6 +426,8 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; vcc3-supply = <&vcc5v0_sys>; @@ -443,7 +448,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; @@ -765,3 +770,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index d88c0e8523..dc08da518a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -19,8 +19,6 @@ aliases { ethernet0 = &gmac1; mmc0 = &sdhci; - serial2 = &uart2; - serial9 = &uart9; }; fan: pwm-fan { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts new file mode 100644 index 0000000000..e037bf9db7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts @@ -0,0 +1,812 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "RK3588S CoolPi 4 Model B"; + compatible = "coolpi,pi-4b", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds>; + + led0: led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led1: led-red { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_WLAN; + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + avdd0v85_pcie20: avdd0v85-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v85_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + avdd1v8_pcie20: avdd1v8-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd1v8_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + vcc3v3_mipi: vcc3v3-mipi-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_mipi"; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_u3host_en>; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&rtl8111_isolate>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + led { + gpio_leds: gpio-leds { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>, + <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + rtl8111 { + rtl8111_isolate: rtl8111-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vcc5v0_u3host_en: vcc5v0-u3host-en { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_reset_gpio: bt-reset-pin { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_gpio: bt-wake-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_irq: bt-wake-host-irq { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_poweren_pin: wifi-poweren-pin { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm13m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* bt */ +&uart9 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 3b675fd0c5..3c22788868 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -44,7 +44,6 @@ mmc0 = &sdhci; mmc1 = &sdmmc; mmc2 = &sdio; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts index 82478a4525..f53e993c78 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -12,7 +12,6 @@ aliases { mmc0 = &sdhci; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts index e3a839a12d..25de4362af 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts @@ -13,8 +13,8 @@ compatible = "xunlong,orangepi-5", "rockchip,rk3588s"; aliases { + ethernet0 = &gmac1; mmc0 = &sdmmc; - serial2 = &uart2; }; chosen { @@ -314,6 +314,7 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; spi-max-frequency = <1000000>; + system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; @@ -660,3 +661,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 8347adcbd0..2002fd0221 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -12,9 +12,9 @@ compatible = "radxa,rock-5a", "rockchip,rk3588s"; aliases { + ethernet0 = &gmac1; mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; analog-sound { @@ -114,6 +114,10 @@ }; }; +&combphy2_psu { + status = "okay"; +}; + &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; @@ -734,3 +738,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 1d262cd54c..82350ddb26 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -18,6 +18,38 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + serial8 = &uart8; + serial9 = &uart9; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -362,6 +394,11 @@ #clock-cells = <0>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, @@ -474,6 +511,16 @@ reg = <0x0 0xfd58c000 0x0 0x1000>; }; + vop_grf: syscon@fd5a4000 { + compatible = "rockchip,rk3588-vop-grf", "syscon"; + reg = <0x0 0xfd5a4000 0x0 0x2000>; + }; + + vo1_grf: syscon@fd5a8000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a8000 0x0 0x100>; + }; + php_grf: syscon@fd5b0000 { compatible = "rockchip,rk3588-php-grf", "syscon"; reg = <0x0 0xfd5b0000 0x0 0x1000>; @@ -593,6 +640,74 @@ status = "disabled"; }; + vop: vop@fdd90000 { + compatible = "rockchip,rk3588-vop"; + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3588_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,vop-grf = <&vop_grf>; + rockchip,vo1-grf = <&vo1_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + vp3: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + vop_mmu: iommu@fdd97e00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VOP>; + status = "disabled"; + }; + uart0: serial@fd890000 { compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; reg = <0x0 0xfd890000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index 97522fb0bf..3ce81ad711 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -2,4 +2,5 @@ dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ sp9860g-1h10.dtb \ sp9863a-1h10.dtb \ - ums512-1h10.dtb + ums512-1h10.dtb \ + ums9620-2h10.dtb diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi index cc4459551e..dbdb79f8e9 100644 --- a/arch/arm64/boot/dts/sprd/ums512.dtsi +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -683,8 +683,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f040000 0 0x1000>; cpu = <&CPU0>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -700,8 +700,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f140000 0 0x1000>; cpu = <&CPU1>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -717,8 +717,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f240000 0 0x1000>; cpu = <&CPU2>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -734,8 +734,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f340000 0 0x1000>; cpu = <&CPU3>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -751,8 +751,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f440000 0 0x1000>; cpu = <&CPU4>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -768,8 +768,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f540000 0 0x1000>; cpu = <&CPU5>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -785,8 +785,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f640000 0 0x1000>; cpu = <&CPU6>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -802,8 +802,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f740000 0 0x1000>; cpu = <&CPU7>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { diff --git a/arch/arm64/boot/dts/sprd/ums9620-2h10.dts b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts new file mode 100644 index 0000000000..b35671192a --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS9620-2h10 board DTS file + * + * Copyright (C) 2023, Unisoc Inc. + */ + +/dts-v1/; + +#include "ums9620.dtsi" + +/ { + model = "Unisoc UMS9620-2H10 Board"; + + compatible = "sprd,ums9620-2h10", "sprd,ums9620"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; + + chosen { + stdout-path = "serial1:921600n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/sprd/ums9620.dtsi b/arch/arm64/boot/dts/sprd/ums9620.dtsi new file mode 100644 index 0000000000..2191f0a481 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums9620.dtsi @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS9620 DTS file + * + * Copyright (C) 2023, Unisoc Inc. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + core4 { + cpu = <&CPU4>; + }; + core5 { + cpu = <&CPU5>; + }; + core6 { + cpu = <&CPU6>; + }; + core7 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + }; + + idle-states { + entry-method = "psci"; + LIT_CORE_PD: cpu-pd-lit { + compatible = "arm,idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <500>; + min-residency-us = <2500>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + + BIG_CORE_PD: cpu-pd-big { + compatible = "arm,idle-state"; + entry-latency-us = <4000>; + exit-latency-us = <4000>; + min-residency-us = <10000>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc: soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@12000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x12000000 0 0x20000>, /* GICD */ + <0x0 0x12040000 0 0x100000>; /* GICR */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + redistributor-stride = <0x0 0x20000>; /* 128KB stride */ + #redistributor-regions = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apb@20200000 { + compatible = "simple-bus"; + ranges = <0 0 0x20200000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@0 { + compatible = "sprd,ums9620-uart", + "sprd,sc9836-uart"; + reg = <0 0x100>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@10000 { + compatible = "sprd,ums9620-uart", + "sprd,sc9836-uart"; + reg = <0x10000 0x100>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + }; + }; + + ext_26m: clk-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; + + ext_4m: clk-4m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <4000000>; + clock-output-names = "ext-4m"; + }; + + ext_32k: clk-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; + }; + + rco_100m: clk-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "rco-100m"; + }; + + dphy_312m5: dphy-312m5 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <312500000>; + clock-output-names = "dphy-312m5"; + }; + + dphy_416m7: dphy-416m7 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416700000>; + clock-output-names = "dphy-416m7"; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 124403f5f1..96859d098e 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -140,6 +140,22 @@ }; }; + bsec: efuse@44000000 { + compatible = "st,stm32mp25-bsec"; + reg = <0x44000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + part_number_otp@24 { + reg = <0x24 0x4>; + }; + + package_otp@1e8 { + reg = <0x1e8 0x1>; + bits = <0 3>; + }; + }; + syscfg: syscon@44230000 { compatible = "st,stm32mp25-syscfg", "syscon"; reg = <0x44230000 0x10000>; diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index bb50a9f7db..aaffb50b8b 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -342,6 +342,18 @@ #clock-cells = <0>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mfc_left: region@84000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0 0x84000000 0 0x8000000>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -581,7 +593,7 @@ }; serial_0: serial@14180000 { - compatible = "samsung,exynos4210-uart"; + compatible = "tesla,fsd-uart", "samsung,exynos4210-uart"; reg = <0x0 0x14180000 0x0 0x100>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 1>, <&pdma1 0>; @@ -593,7 +605,7 @@ }; serial_1: serial@14190000 { - compatible = "samsung,exynos4210-uart"; + compatible = "tesla,fsd-uart", "samsung,exynos4210-uart"; reg = <0x0 0x14190000 0x0 0x100>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 3>, <&pdma1 2>; @@ -605,12 +617,12 @@ }; pmu_system_controller: system-controller@11400000 { - compatible = "samsung,exynos7-pmu", "syscon"; + compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon"; reg = <0x0 0x11400000 0x0 0x5000>; }; watchdog_0: watchdog@100a0000 { - compatible = "samsung,exynos7-wdt"; + compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt"; reg = <0x0 0x100a0000 0x0 0x100>; interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -619,7 +631,7 @@ }; watchdog_1: watchdog@100b0000 { - compatible = "samsung,exynos7-wdt"; + compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt"; reg = <0x0 0x100b0000 0x0 0x100>; interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -628,7 +640,7 @@ }; watchdog_2: watchdog@100c0000 { - compatible = "samsung,exynos7-wdt"; + compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt"; reg = <0x0 0x100c0000 0x0 0x100>; interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -637,7 +649,7 @@ }; pwm_0: pwm@14100000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm"; reg = <0x0 0x14100000 0x0 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; @@ -647,7 +659,7 @@ }; pwm_1: pwm@14110000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm"; reg = <0x0 0x14110000 0x0 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; @@ -657,7 +669,7 @@ }; hsi2c_0: i2c@14200000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14200000 0x0 0x1000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -670,7 +682,7 @@ }; hsi2c_1: i2c@14210000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14210000 0x0 0x1000>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -683,7 +695,7 @@ }; hsi2c_2: i2c@14220000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14220000 0x0 0x1000>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -696,7 +708,7 @@ }; hsi2c_3: i2c@14230000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14230000 0x0 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -709,7 +721,7 @@ }; hsi2c_4: i2c@14240000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14240000 0x0 0x1000>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -722,7 +734,7 @@ }; hsi2c_5: i2c@14250000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14250000 0x0 0x1000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -735,7 +747,7 @@ }; hsi2c_6: i2c@14260000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14260000 0x0 0x1000>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -748,7 +760,7 @@ }; hsi2c_7: i2c@14270000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14270000 0x0 0x1000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -956,6 +968,15 @@ clock-names = "fin_pll", "mct"; }; + mfc: mfc@12880000 { + compatible = "tesla,fsd-mfc"; + reg = <0x0 0x12880000 0x0 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "mfc"; + clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>; + memory-region = <&mfc_left>; + }; + ufs: ufs@15120000 { compatible = "tesla,fsd-ufs"; reg = <0x0 0x15120000 0x0 0x200>, /* 0: HCI standard */ diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c1513f0fa4..08ce34d21d 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -9,20 +9,20 @@ # alphabetically. # Boards with AM62x SoC -k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo -k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb @@ -30,19 +30,19 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb +# Common overlays for SK-AM62* family of boards +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-tevi-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo + # Boards with AM64x SoC dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb - -k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ - k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo -k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ - k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo - -dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo # Boards with AM65x SoC k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo @@ -68,6 +68,7 @@ k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-e dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb # Boards with J721s2 SoC @@ -76,14 +77,59 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J784s4 SoC dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb +# Build time test only, enabled by CONFIG_OF_ALL_DTBS +k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \ + k3-am625-beagleplay-csi2-ov5640.dtbo +k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \ + k3-am625-beagleplay-csi2-tevi-ov5640.dtbo +k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-imx219.dtbo +k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-ov5640.dtbo +k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-tevi-ov5640.dtbo +k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo +k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo +k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-imx219.dtbo +k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-ov5640.dtbo +k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-tevi-ov5640.dtbo +k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ + k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo +k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ + k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo +k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \ + k3-j721e-evm-pcie0-ep.dtbo +k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \ + k3-j721s2-evm-pcie1-ep.dtbo +dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ + k3-am625-beagleplay-csi2-tevi-ov5640.dtb \ + k3-am625-sk-csi2-imx219.dtb \ + k3-am625-sk-csi2-ov5640.dtb \ + k3-am625-sk-csi2-tevi-ov5640.dtb \ + k3-am625-sk-hdmi-audio.dtb \ + k3-am62-lp-sk-hdmi-audio.dtb \ + k3-am62a7-sk-csi2-imx219.dtb \ + k3-am62a7-sk-csi2-ov5640.dtb \ + k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ + k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ + k3-j721e-evm-pcie0-ep.dtb \ + k3-j721s2-evm-pcie1-ep.dtb + # Enable support for device-tree overlays +DTC_FLAGS_k3-am625-beagleplay += -@ DTC_FLAGS_k3-am625-sk += -@ DTC_FLAGS_k3-am62-lp-sk += -@ +DTC_FLAGS_k3-am62a7-sk += -@ +DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@ DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ DTC_FLAGS_k3-j721e-common-proc-board += -@ DTC_FLAGS_k3-j721s2-common-proc-board += -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 2f318c5287..6d07b65a36 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -121,8 +121,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; @@ -138,8 +143,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; @@ -502,6 +512,9 @@ main_gpio0: gpio@600000 { compatible = "ti,am64-gpio", "ti,keystone-gpio"; reg = <0x0 0x00600000 0x0 0x100>; + gpio-ranges = <&main_pmx0 0 0 32>, + <&main_pmx0 32 33 38>, + <&main_pmx0 70 72 22>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&main_gpio_intr>; @@ -520,6 +533,10 @@ compatible = "ti,am64-gpio", "ti,keystone-gpio"; reg = <0x0 0x00601000 0x0 0x100>; gpio-controller; + gpio-ranges = <&main_pmx0 0 94 41>, + <&main_pmx0 41 136 6>, + <&main_pmx0 47 143 3>, + <&main_pmx0 50 149 2>; #gpio-cells = <2>; interrupt-parent = <&main_gpio_intr>; interrupts = <180>, <181>, <182>, @@ -679,6 +696,15 @@ }; }; + gpu: gpu@fd00000 { + compatible = "ti,am62-gpu", "img,img-axe"; + reg = <0x00 0x0fd00000 0x00 0x20000>; + clocks = <&k3_clks 187 0>; + clock-names = "core"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>; + }; + cpsw3g: ethernet@8000000 { compatible = "ti,am642-cpsw-nuss"; #address-cells = <2>; @@ -970,4 +996,66 @@ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_bcdma 0 0x4700 0>; + dma-names = "rx0"; + reg = <0x00 0x30102000 0x00 0x1000>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi index 013357d17d..bf6d27e70b 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi @@ -214,6 +214,5 @@ /* Verdin UART_2 */ &wkup_uart0 { - /* FIXME: WKUP UART0 is used by DM firmware */ - status = "reserved"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi index 6701cb8974..680071688d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi @@ -235,6 +235,5 @@ /* Verdin UART_2 */ &wkup_uart0 { - /* FIXME: WKUP UART0 is used by DM firmware */ - status = "reserved"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi new file mode 100644 index 0000000000..17b93534f6 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Mallow carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_clk_gpio>, + <&pinctrl_qspi1_cs_gpio>, + <&pinctrl_qspi1_io0_gpio>, + <&pinctrl_qspi1_io1_gpio>; + + /* SODIMM 52 - USER_LED_1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 54 - USER_LED_1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 56 - USER_LED_2_RED */ + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 58 - USER_LED_2_GREEN */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin ETH */ +&cpsw3g { + status = "okay"; +}; + +/* Verdin MDIO */ +&cpsw3g_mdio { + status = "okay"; +}; + +/* Verdin ETH_1*/ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin PWM_1 and PWM_2*/ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3 DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2 DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4 CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + pinctrl-0 = <&pinctrl_spi1>, + <&pinctrl_spi1_cs0>, + <&pinctrl_qspi1_cs2_gpio>; + cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + status = "okay"; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin CAN_2 */ +&mcu_mcan0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi index c685df7dea..997dfafd27 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi @@ -207,6 +207,5 @@ /* Verdin UART_2 */ &wkup_uart0 { - /* FIXME: WKUP UART0 is used by DM firmware */ - status = "reserved"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 5db52f2372..6a06724b6d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -233,6 +233,13 @@ >; }; + /* Verdin SPI_1 CS as GPIO */ + pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */ + >; + }; + /* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */ pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins { pinctrl-single,pins = < @@ -599,12 +606,18 @@ pinctrl_spi1: main-spi1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */ - AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */ AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0 */ /* SODIMM 200 */ AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1 */ /* SODIMM 198 */ >; }; + /* Verdin SPI_1 CS */ + pinctrl_spi1_cs0: main-spi1-cs0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */ + >; + }; + /* ETH_25MHz_CLK */ pinctrl_eth_clock: main-system-clkout0-default-pins { pinctrl-single,pins = < @@ -1278,7 +1291,7 @@ /* Verdin SPI_1 */ &main_spi1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1>; + pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>; ti,pindir-d0-out-d1-in; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso new file mode 100644 index 0000000000..5e80ca7033 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&main_gpio0 { + p11-hog { + /* P11 - CSI2_CAMERA_GPIO1 */ + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CSI2_CAMERA_GPIO1"; + }; +}; + +&wkup_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&ti_csi2rx0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso new file mode 100644 index 0000000000..5e1cbbc27c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Technexion TEVI-OV5640-*-RPI - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_gpio0 { + p11-hog { + /* P11 - CSI2_CAMERA_GPIO1 */ + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CSI2_CAMERA_GPIO1"; + }; +}; + +&wkup_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&ti_csi2rx0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 9a6bd0a3c9..eadbdd9ffe 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -443,7 +443,7 @@ >; }; - console_pins_default: console-default-pins { + main_uart0_pins_default: main-uart0-default-pins { bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ @@ -877,7 +877,7 @@ &main_uart0 { bootph-all; pinctrl-names = "default"; - pinctrl-0 = <&console_pins_default>; + pinctrl-0 = <&main_uart0_pins_default>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts index a438baf542..4bc0134c98 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -35,6 +35,18 @@ standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; }; + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; + keys { compatible = "gpio-keys"; autorepeat; @@ -93,6 +105,37 @@ >; }; + hdmi_int_pins_default: hdmi-int-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ + >; + }; + + main_dss0_pins_default: main-dss0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + >; + }; + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ @@ -184,10 +227,30 @@ }; }; +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&main_dss0_pins_default>; + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VP2: DPI/HDMI Output */ + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; + &main_i2c1 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; + clock-frequency = <100000>; status = "okay"; gpio_exp: gpio-expander@21 { @@ -201,12 +264,43 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN", + gpio-line-names = "", "GPIO1_CAN0_nEN", "GPIO2_LED2", "GPIO3_LVDS_GPIO", "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; }; + sii9022: bridge-hdmi@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + + interrupt-parent = <&main_gpio0>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_int_pins_default>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + eeprom@51 { compatible = "atmel,24c02"; pagesize = <16>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts new file mode 100644 index 0000000000..9cae12106e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin AM62 on Mallow Board"; + compatible = "toradex,verdin-am62-nonwifi-mallow", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts new file mode 100644 index 0000000000..81d834b226 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Mallow Board"; + compatible = "toradex,verdin-am62-wifi-mallow", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index ccd708b09a..f0b8c9ab14 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -101,8 +101,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; ti,sci = <&dmsc>; @@ -117,8 +122,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; ti,sci = <&dmsc>; @@ -144,6 +154,44 @@ }; }; + dmss_csi: bus@4e000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>; + + ti,sci-dev-id = <198>; + + inta_main_dmss_csi: interrupt-controller@4e0a0000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x4e0a0000 0x00 0x8000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <200>; + ti,interrupt-ranges = <0 237 8>; + ti,unmapped-event-sources = <&main_bcdma_csi>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + }; + + main_bcdma_csi: dma-controller@4e230000 { + compatible = "ti,am62a-dmss-bcdma-csirx"; + reg = <0x00 0x4e230000 0x00 0x100>, + <0x00 0x4e180000 0x00 0x8000>, + <0x00 0x4e100000 0x00 0x10000>; + reg-names = "gcfg", "rchanrt", "ringrt"; + msi-parent = <&inta_main_dmss_csi>; + #dma-cells = <3>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <199>; + ti,sci-rm-range-rchan = <0x21>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + }; + }; + dmsc: system-controller@44043000 { compatible = "ti,k2g-sci"; reg = <0x00 0x44043000 0x00 0xfe0>; @@ -876,4 +924,65 @@ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_bcdma_csi 0 0x5000 0>; + dma-names = "rx0"; + reg = <0x00 0x30102000 0x00 0x1000>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 8f64ac2c75..7b71425862 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -274,6 +274,12 @@ AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */ >; }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */ + >; + }; }; &mcu_pmx0 { @@ -407,6 +413,12 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", "BT_EN_SOC", "MMC1_SD_EN", @@ -434,6 +446,33 @@ DRVDD-supply = <&vcc_3v3_sys>; DVDD-supply = <&buck5>; }; + + exp2: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", "", + "", "", + "", "", + "", "", + "WL_LT_EN", "CSI_RSTz", + "", "", + "", "", + "", "", + "SPI0_FET_SEL", "SPI0_FET_OE", + "RGMII2_BRD_CONN_DET", "CSI_SEL2", + "CSI_EN", "AUTO_100M_1000M_CONFIG", + "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST"; + }; +}; + +&main_i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; }; &sdhci1 { diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 963758c7d3..4c51bae06b 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -101,8 +101,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; @@ -119,8 +124,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; bootph-all; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 04e51934d2..60868862e3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -602,3 +602,12 @@ status = "reserved"; bootph-all; }; + +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + +&mcu_gpio_intr { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 19f57ead4e..33768c02d8 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -399,6 +399,13 @@ }; }; +&main_i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; +}; + &sdhci0 { bootph-all; status = "okay"; @@ -517,3 +524,12 @@ }; }; }; + +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + +&mcu_gpio_intr { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso new file mode 100644 index 0000000000..6f4cd73c2f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IMX219 (RPi v2) Camera Module + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_imx219_fixed: imx219-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@10 { + compatible = "sony,imx219"; + reg = <0x10>; + + clocks = <&clk_imx219_fixed>; + clock-names = "xclk"; + + reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + link-frequencies = /bits/ 64 <456000000>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso new file mode 100644 index 0000000000..9323a4b383 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso new file mode 100644 index 0000000000..dcaa33a4c8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Technexion TEVI-OV5640-*-RPI - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 45042216e5..ba624ef72f 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -63,7 +63,7 @@ #phy-cells = <1>; }; - epwm_tbclk: clock-controller@4140 { + epwm_tbclk: clock-controller@4130 { compatible = "ti,am64-epwm-tbclk"; reg = <0x4130 0x4>; #clock-cells = <1>; @@ -138,8 +138,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; @@ -155,8 +160,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x20000>, + <0x00 0x484a0000 0x00 0x4000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index b8f844f667..1678e74cb7 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -29,7 +29,7 @@ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; @@ -39,6 +39,54 @@ alignment = <0x1000>; no-map; }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; }; leds { @@ -166,6 +214,34 @@ status = "disabled"; }; +&mailbox0_cluster2 { + status = "okay"; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + &main_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -191,6 +267,30 @@ }; }; +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + &ospi0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 256606be56..8c5651d2cf 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -468,11 +468,15 @@ bootph-all; }; -/* mcu_gpio0 is reserved for mcu firmware usage */ +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; }; +&mcu_gpio_intr { + status = "reserved"; +}; + &main_spi0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index bffbd234f7..1dddd6fc1a 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -433,11 +433,15 @@ }; }; -/* mcu_gpio0 is reserved for mcu firmware usage */ +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; }; +&mcu_gpio_intr { + status = "reserved"; +}; + &sdhci0 { status = "okay"; vmmc-supply = <&wlan_en>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi index 51f902fa35..1d19798595 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) Siemens AG, 2021 + * Copyright (c) Siemens AG, 2021-2023 * * Authors: * Jan Kiszka <jan.kiszka@siemens.com> @@ -44,3 +44,11 @@ &tx_pru2_1 { status = "disabled"; }; + +&icssg0_eth { + status = "disabled"; +}; + +&icssg0_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi index e9419c4fe6..e9b57b87e4 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi @@ -20,7 +20,9 @@ &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = <&cp2102n_reset_pin_default>; + pinctrl-0 = + <&main_pcie_enable_pins_default>, + <&cp2102n_reset_pin_default>; gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index b849648d51..61a634afaa 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -9,8 +9,8 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 */ -#include "k3-am654.dtsi" #include <dt-bindings/phy/phy.h> +#include <dt-bindings/net/ti-dp83867.h> / { aliases { @@ -27,6 +27,8 @@ spi0 = &mcu_spi0; mmc0 = &sdhci1; mmc1 = &sdhci0; + ethernet1 = &icssg0_emac0; + ethernet2 = &icssg0_emac1; }; chosen { @@ -111,9 +113,498 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + /* Dual Ethernet application node on PRU-ICSSG0 */ + icssg0_eth: icssg0-eth { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, + <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg0_mii_g_rt>; + ti,mii-rt = <&icssg0_mii_rt>; + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; + + interrupt-parent = <&icssg0_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_udmap 0xc100>, /* egress slice 0 */ + <&main_udmap 0xc101>, /* egress slice 0 */ + <&main_udmap 0xc102>, /* egress slice 0 */ + <&main_udmap 0xc103>, /* egress slice 0 */ + <&main_udmap 0xc104>, /* egress slice 1 */ + <&main_udmap 0xc105>, /* egress slice 1 */ + <&main_udmap 0xc106>, /* egress slice 1 */ + <&main_udmap 0xc107>, /* egress slice 1 */ + <&main_udmap 0x4100>, /* ingress slice 0 */ + <&main_udmap 0x4101>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg0_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg0_eth0_phy>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4100>; + ti,half-duplex-capable; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + icssg0_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg0_eth1_phy>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4104>; + ti,half-duplex-capable; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; }; &wkup_pmx0 { + pinctrl-names = + "default", + "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown", + "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown", + "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown", + "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown", + "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown", + "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown", + "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown", + "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown", + "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown", + "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown", + "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown", + "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown", + "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown", + "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown"; + + pinctrl-0 = <&d0_uart0_rxd>; + pinctrl-1 = <&d0_uart0_rxd>; + pinctrl-2 = <&d0_gpio>; + pinctrl-3 = <&d0_gpio_pullup>; + pinctrl-4 = <&d0_gpio_pulldown>; + pinctrl-5 = <&d1_uart0_txd>; + pinctrl-6 = <&d1_gpio>; + pinctrl-7 = <&d1_gpio_pullup>; + pinctrl-8 = <&d1_gpio_pulldown>; + pinctrl-9 = <&d2_uart0_ctsn>; + pinctrl-10 = <&d2_gpio>; + pinctrl-11 = <&d2_gpio_pullup>; + pinctrl-12 = <&d2_gpio_pulldown>; + pinctrl-13 = <&d3_uart0_rtsn>; + pinctrl-14 = <&d3_gpio>; + pinctrl-15 = <&d3_gpio_pullup>; + pinctrl-16 = <&d3_gpio_pulldown>; + pinctrl-17 = <&d10_spi0_cs0>; + pinctrl-18 = <&d10_gpio>; + pinctrl-19 = <&d10_gpio_pullup>; + pinctrl-20 = <&d10_gpio_pulldown>; + pinctrl-21 = <&d11_spi0_d0>; + pinctrl-22 = <&d11_gpio>; + pinctrl-23 = <&d11_gpio_pullup>; + pinctrl-24 = <&d11_gpio_pulldown>; + pinctrl-25 = <&d12_spi0_d1>; + pinctrl-26 = <&d12_gpio>; + pinctrl-27 = <&d12_gpio_pullup>; + pinctrl-28 = <&d12_gpio_pulldown>; + pinctrl-29 = <&d13_spi0_clk>; + pinctrl-30 = <&d13_gpio>; + pinctrl-31 = <&d13_gpio_pullup>; + pinctrl-32 = <&d13_gpio_pulldown>; + pinctrl-33 = <&a0_gpio>; + pinctrl-34 = <&a0_gpio_pullup>; + pinctrl-35 = <&a0_gpio_pulldown>; + pinctrl-36 = <&a1_gpio>; + pinctrl-37 = <&a1_gpio_pullup>; + pinctrl-38 = <&a1_gpio_pulldown>; + pinctrl-39 = <&a2_gpio>; + pinctrl-40 = <&a2_gpio_pullup>; + pinctrl-41 = <&a2_gpio_pulldown>; + pinctrl-42 = <&a3_gpio>; + pinctrl-43 = <&a3_gpio_pullup>; + pinctrl-44 = <&a3_gpio_pulldown>; + pinctrl-45 = <&a4_gpio>; + pinctrl-46 = <&a4_gpio_pullup>; + pinctrl-47 = <&a4_gpio_pulldown>; + pinctrl-48 = <&a5_gpio>; + pinctrl-49 = <&a5_gpio_pullup>; + pinctrl-50 = <&a5_gpio_pulldown>; + + d0_uart0_rxd: d0-uart0-rxd-pins { + pinctrl-single,pins = < + /* (P4) MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) + >; + }; + + d0_gpio: d0-gpio-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) + >; + }; + + d0_gpio_pullup: d0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7) + >; + }; + + d0_gpio_pulldown: d0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d1_uart0_txd: d1-uart0-txd-pins { + pinctrl-single,pins = < + /* (P5) MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) + >; + }; + + d1_gpio: d1-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pullup: d1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pulldown: d1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d2_uart0_ctsn: d2-uart0-ctsn-pins { + pinctrl-single,pins = < + /* (P1) MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) + >; + }; + + d2_gpio: d2-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pullup: d2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pulldown: d2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d3_uart0_rtsn: d3-uart0-rtsn-pins { + pinctrl-single,pins = < + /* (N3) MCU_UART0_RTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) + >; + }; + + d3_gpio: d3-gpio-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pullup: d3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pulldown: d3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d10_spi0_cs0: d10-spi0-cs0-pins { + pinctrl-single,pins = < + /* (Y4) MCU_SPI0_CS0 */ + AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) + >; + }; + + d10_gpio: d10-gpio-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pullup: d10-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pulldown: d10-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d11_spi0_d0: d11-spi0-d0-pins { + pinctrl-single,pins = < + /* (Y3) MCU_SPI0_D0 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) + >; + }; + + d11_gpio: d11-gpio-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pullup: d11-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pulldown: d11-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d12_spi0_d1: d12-spi0-d1-pins { + pinctrl-single,pins = < + /* (Y2) MCU_SPI0_D1 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) + >; + }; + + d12_gpio: d12-gpio-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pullup: d12-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pulldown: d12-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d13_spi0_clk: d13-spi0-clk-pins { + pinctrl-single,pins = < + /* (Y1) MCU_SPI0_CLK */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) + >; + }; + + d13_gpio: d13-gpio-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pullup: d13-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pulldown: d13-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a0_gpio: a0-gpio-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pullup: a0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pulldown: a0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a1_gpio: a1-gpio-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pullup: a1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pulldown: a1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a2_gpio: a2-gpio-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pullup: a2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pulldown: a2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a3_gpio: a3-gpio-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pullup: a3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pulldown: a3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a4_gpio: a4-gpio-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pullup: a4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pulldown: a4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a5_gpio: a5-gpio-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7) + >; + }; + + a5_gpio_pullup: a5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7) + >; + }; + + a5_gpio_pulldown: a5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7) + >; + }; + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < /* (AC7) WKUP_I2C0_SCL */ @@ -146,23 +637,6 @@ >; }; - arduino_uart_pins_default: arduino-uart-default-pins { - pinctrl-single,pins = < - /* (P4) MCU_UART0_RXD */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) - /* (P5) MCU_UART0_TXD */ - AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) - >; - }; - - arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { - pinctrl-single,pins = < - /* (P1) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7) - >; - }; arduino_io_oe_pins_default: arduino-io-oe-default-pins { pinctrl-single,pins = < @@ -242,6 +716,220 @@ }; &main_pmx0 { + pinctrl-names = + "default", + "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown", + "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown", + "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown", + "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown", + "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown", + "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown"; + + pinctrl-0 = <&d4_ehrpwm0_a>; + pinctrl-1 = <&d4_ehrpwm0_a>; + pinctrl-2 = <&d4_gpio>; + pinctrl-3 = <&d4_gpio_pullup>; + pinctrl-4 = <&d4_gpio_pulldown>; + + pinctrl-5 = <&d5_ehrpwm1_a>; + pinctrl-6 = <&d5_gpio>; + pinctrl-7 = <&d5_gpio_pullup>; + pinctrl-8 = <&d5_gpio_pulldown>; + + pinctrl-9 = <&d6_ehrpwm2_a>; + pinctrl-10 = <&d6_gpio>; + pinctrl-11 = <&d6_gpio_pullup>; + pinctrl-12 = <&d6_gpio_pulldown>; + + pinctrl-13 = <&d7_ehrpwm3_a>; + pinctrl-14 = <&d7_gpio>; + pinctrl-15 = <&d7_gpio_pullup>; + pinctrl-16 = <&d7_gpio_pulldown>; + + pinctrl-17 = <&d8_ehrpwm4_a>; + pinctrl-18 = <&d8_gpio>; + pinctrl-19 = <&d8_gpio_pullup>; + pinctrl-20 = <&d8_gpio_pulldown>; + + pinctrl-21 = <&d9_ehrpwm5_a>; + pinctrl-22 = <&d9_gpio>; + pinctrl-23 = <&d9_gpio_pullup>; + pinctrl-24 = <&d9_gpio_pulldown>; + + d4_ehrpwm0_a: d4-ehrpwm0-a-pins { + pinctrl-single,pins = < + /* (AG18) EHRPWM0_A */ + AM65X_IOPAD(0x0084, PIN_OUTPUT, 5) + >; + }; + + d4_gpio: d4-gpio-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + d4_gpio_pullup: d4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) + >; + }; + + d4_gpio_pulldown: d4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d5_ehrpwm1_a: d5-ehrpwm1-a-pins { + pinctrl-single,pins = < + /* (AF17) EHRPWM1_A */ + AM65X_IOPAD(0x008C, PIN_OUTPUT, 5) + >; + }; + + d5_gpio: d5-gpio-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT, 7) + >; + }; + + d5_gpio_pullup: d5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7) + >; + }; + + d5_gpio_pulldown: d5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d6_ehrpwm2_a: d6-ehrpwm2-a-pins { + pinctrl-single,pins = < + /* (AH16) EHRPWM2_A */ + AM65X_IOPAD(0x0098, PIN_OUTPUT, 5) + >; + }; + + d6_gpio: d6-gpio-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d6_gpio_pullup: d6-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7) + >; + }; + + d6_gpio_pulldown: d6-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d7_ehrpwm3_a: d7-ehrpwm3-a-pins { + pinctrl-single,pins = < + /* (AH15) EHRPWM3_A */ + AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5) + >; + }; + + d7_gpio: d7-gpio-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT, 7) + >; + }; + + d7_gpio_pullup: d7-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7) + >; + }; + + d7_gpio_pulldown: d7-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d8_ehrpwm4_a: d8-ehrpwm4-a-pins { + pinctrl-single,pins = < + /* (AG15) EHRPWM4_A */ + AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5) + >; + }; + + d8_gpio: d8-gpio-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT, 7) + >; + }; + + d8_gpio_pullup: d8-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7) + >; + }; + + d8_gpio_pulldown: d8-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d9_ehrpwm5_a: d9-ehrpwm5-a-pins { + pinctrl-single,pins = < + /* (AD15) EHRPWM5_A */ + AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5) + >; + }; + + d9_gpio: d9-gpio-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT, 7) + >; + }; + + d9_gpio_pullup: d9-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7) + >; + }; + + d9_gpio_pulldown: d9-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + main_pcie_enable_pins_default: main-pcie-enable-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ + >; + }; + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ @@ -283,17 +971,6 @@ >; }; - arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */ - >; - }; - dss_vout1_pins_default: dss-vout1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ @@ -339,6 +1016,43 @@ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ >; }; + + icssg0_mdio_pins_default: icssg0-mdio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */ + AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */ + >; + }; + + icssg0_rgmii_pins_default: icssg0-rgmii-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ + AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ + AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ + AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ + AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */ + AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */ + AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */ + AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */ + AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ + AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */ + AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ + AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ + + AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ + AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ + AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ + AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ + AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */ + AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */ + AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */ + AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */ + AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ + AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */ + AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ + AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ + >; + }; }; &main_pmx1 { @@ -355,12 +1069,6 @@ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - - ecap0_pins_default: ecap0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ - >; - }; }; &wkup_uart0 { @@ -376,13 +1084,9 @@ &mcu_uart0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&arduino_uart_pins_default>; }; &main_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>; gpio-line-names = "main_gpio0-base", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -392,10 +1096,14 @@ "", "IO9"; }; +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_pcie_enable_pins_default>; +}; + &wkup_gpio0 { pinctrl-names = "default"; pinctrl-0 = - <&arduino_io_d2_to_d3_pins_default>, <&arduino_i2c_aio_switch_pins_default>, <&arduino_io_oe_pins_default>, <&push_button_pins_default>, @@ -557,13 +1265,8 @@ status = "disabled"; }; -&ecap0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins_default>; -}; - &sdhci1 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; @@ -584,9 +1287,6 @@ &mcu_spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_spi0_pins_default>; - #address-cells = <1>; #size-cells = <0>; ti,pindir-d0-out-d1-in; @@ -726,3 +1426,21 @@ <&mcu_r5fss0_core1_memory_region>; mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; + +&icssg0_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_mdio_pins_default>; + + icssg0_eth0_phy: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + + icssg0_eth1_phy: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index fa2304a7cb..5b2d4365b9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -449,6 +449,7 @@ ti,otap-del-sel-hs400 = <0x0>; ti,trm-icp = <0x8>; dma-coherent; + status = "disabled"; }; sdhci1: mmc@4fa0000 { @@ -471,6 +472,7 @@ ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; + status = "disabled"; }; scm_conf: scm-conf@100000 { @@ -498,8 +500,8 @@ }; dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { - compatible = "syscon"; - reg = <0x000041e0 0x14>; + compatible = "ti,am654-dss-oldi-io-ctrl", "syscon"; + reg = <0x41e0 0x14>; }; ehrpwm_tbclk: clock-controller@4140 { @@ -790,8 +792,12 @@ compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x10000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index edd5cfbec4..ecd7356f33 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -214,8 +214,12 @@ compatible = "ti,am654-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index fd2b998ebd..f037b36243 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -34,9 +34,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x43000014 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; wkup_pmx0: pinctrl@4301c000 { diff --git a/arch/arm64/boot/dts/ti/k3-am652.dtsi b/arch/arm64/boot/dts/ti/k3-am652.dtsi new file mode 100644 index 0000000000..0f22e00faa --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am652.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM65 SoC family in Dual core configuration + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "k3-am65.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi index 5ab434c02a..1d6cddb119 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi @@ -9,6 +9,7 @@ * Common bits of the IOT2050 Basic variant, PG1 and PG2 */ +#include "k3-am652.dtsi" #include "k3-am65-iot2050-common.dtsi" / { @@ -17,21 +18,6 @@ /* 1G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x40000000>; }; - - cpus { - cpu-map { - /delete-node/ cluster1; - }; - /delete-node/ cpu@100; - /delete-node/ cpu@101; - }; - - /delete-node/ l2-cache1; -}; - -/* eMMC */ -&sdhci0 { - status = "disabled"; }; &main_pmx0 { diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 1637ec5ab5..822c288d27 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -449,6 +449,7 @@ }; &sdhci0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; bus-width = <8>; @@ -463,6 +464,7 @@ * disable sdhci1 */ &sdhci1 { + status = "okay"; vmmc-supply = <&vdd_mmc1_sd>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi index be55494b1f..3864ec54e3 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -11,6 +11,7 @@ /dts-v1/; +#include "k3-am654.dtsi" #include "k3-am65-iot2050-common.dtsi" / { @@ -43,6 +44,7 @@ /* eMMC */ &sdhci0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; bus-width = <8>; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index 774eb14ac9..bd6f2e696e 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -27,12 +27,6 @@ }; &main_pmx0 { - main_m2_enable_pins_default: main-m2-enable-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ - >; - }; - main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */ @@ -66,15 +60,13 @@ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = - <&main_m2_pcie_mux_control>, - <&arduino_io_d4_to_d9_pins_default>; + pinctrl-0 = <&main_m2_pcie_mux_control>; }; &main_gpio1 { pinctrl-names = "default"; pinctrl-0 = - <&main_m2_enable_pins_default>, + <&main_pcie_enable_pins_default>, <&main_pmx0_m2_config_pins_default>, <&main_pmx1_m2_config_pins_default>, <&cp2102n_reset_pin_default>; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 1e1a82f9d2..d0cfdeac21 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -31,6 +31,7 @@ can1 = &mcu_mcan1; can2 = &main_mcan6; can3 = &main_mcan7; + ethernet0 = &cpsw_port1; }; vusb_main: regulator-vusb-main5v0 { diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index fafa09d6dc..c8fb9dfb89 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -433,6 +433,13 @@ &wkup_pmx2 { bootph-all; + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */ + J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7) + >; + }; + wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < @@ -631,6 +638,93 @@ compatible = "atmel,24c512"; reg = <0x51>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <83 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vds_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &wkup_gpio0 { @@ -671,7 +765,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; - gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN", + gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN", "IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#", "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz", "PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz", diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 264913f832..da67bf8fe7 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -281,8 +281,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x100000>, - <0x00 0x35000000 0x00 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x100000>, + <0x00 0x30b00000 0x00 0x4000>, + <0x00 0x30c00000 0x00 0x4000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; @@ -647,6 +651,7 @@ ti,otap-del-sel-hs400 = <0x5>; ti,itap-del-sel-legacy = <0x10>; ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; ti,strobe-sel = <0x77>; ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 3fc588b848..60b26374ae 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -178,9 +178,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x00 0x43000014 0x00 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ @@ -346,8 +353,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 5a300d4c8b..ea47f10d39 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -127,6 +127,14 @@ }; }; +&wkup_pmx3 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */ + >; + }; +}; + &main_pmx0 { main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < @@ -264,6 +272,151 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659414: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka1: buck1 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka2: buck2 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_phyio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd1_lpddr4_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdd_wk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + lp876441: pmic@4c { + compatible = "ti,lp8764-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + + regulators: regulators { + buckb1: buck1 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + bootph-pre-ram; + }; + + buckb2: buck2 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb3: buck3 { + regulator-name = "vdd_core_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ospi0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso new file mode 100644 index 0000000000..0c82a13b65 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the + * J7 common processor board. + * + * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-pinctrl.h" + +/* + * Since Root Complex and Endpoint modes are mutually exclusive + * disable Root Complex mode. + */ +&pcie0_rc { + status = "disabled"; +}; + +&cbass_main { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic500>; + + pcie0_ep: pcie-ep@2900000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; + max-link-speed = <3>; + num-lanes = <1>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 746b9f8b1c..2569b4c08f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -382,8 +382,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index f7ab7719fc..c463e23ced 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -48,9 +48,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x0 0x43000014 0x0 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; wkup_pmx0: pinctrl@4301c000 { @@ -346,9 +353,9 @@ hbmc_mux: mux-controller@47000004 { compatible = "reg-mux"; - reg = <0x00 0x47000004 0x00 0x2>; + reg = <0x00 0x47000004 0x00 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ + mux-reg-masks = <0x0 0x2>; /* HBMC select */ }; hbmc: hyperbus@47034000 { @@ -468,8 +475,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 42fe8eee9e..658764f7d5 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -459,6 +459,12 @@ }; &wkup_pmx0 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ + >; + }; + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ @@ -560,6 +566,151 @@ compatible = "atmel,24c512"; reg = <0x51>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck123-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka123: buck123 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka4: buck4 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_phyio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd1_lpddr4_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659411: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_sd_dv"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_usb_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &mcu_uart0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 7f0686c2ce..a75611eec7 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -152,6 +152,12 @@ >; }; + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */ + >; + }; + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ @@ -199,6 +205,160 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka3: buck3 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_phyio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd1_lpddr4_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659411: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_sd_dv"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_usb_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ospi0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso new file mode 100644 index 0000000000..43568eb67d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the + * J7 common processor board. + * + * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-pinctrl.h" + +/* + * Since Root Complex and Endpoint modes are mutually exclusive + * disable Root Complex mode. + */ +&pcie1_rc { + status = "disabled"; +}; + +&cbass_main { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic500>; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&scm_conf 0x074>; + max-link-speed = <3>; + num-lanes = <1>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 41>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index b03731b53a..ea7f2b2ab1 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -766,6 +766,7 @@ ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; ti,itap-del-sel-sdr25 = <0x0>; + ti,itap-del-sel-ddr50 = <0x2>; ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; @@ -1086,8 +1087,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x80000>, - <0x0 0x35000000 0x0 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x200000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index c9cf1dc04f..a47cb557dd 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -34,9 +34,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x00 0x43000014 0x00 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; secure_proxy_sa3: mailbox@43600000 { @@ -471,8 +478,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index dcad372620..da3237b23b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -172,6 +172,15 @@ }; }; +&wkup_pmx1 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) + >; + }; +}; + &wkup_pmx2 { wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < @@ -208,6 +217,190 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659411: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka1234: buck1234 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuwk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcu_gpioret_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659414: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1: buck1 { + regulator-name = "vdd_io_1v8_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buckb2: buck2 { + regulator-name = "vdd_fpd_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb3: buck3 { + regulator-name = "vdd_phy_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_wk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_gpioret_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + lp876411: pmic@58 { + compatible = "ti,lp8764-q1"; + reg = <0x58>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + + regulators { + buckc1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &main_i2c0 { diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index 50210700fd..33795a0bc6 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -273,6 +273,10 @@ }; }; +&wkup_gpio0 { + status = "okay"; +}; + &main_pmx0 { bootph-all; main_uart8_pins_default: main-uart8-default-pins { @@ -405,6 +409,17 @@ }; }; +&wkup_pmx1 { + status = "okay"; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) + >; + }; +}; + &wkup_pmx0 { bootph-all; mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { @@ -469,6 +484,93 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vds_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &mcu_uart0 { diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index d89bcddcfe..56c8eaad63 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -52,12 +52,12 @@ compatible = "reg-mux"; reg = <0x00004080 0x30>; #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ - <0x4088 0x3>, <0x408c 0x3>, /* SERDES0 lane2/3 select */ - <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ - <0x4098 0x3>, <0x409c 0x3>, /* SERDES1 lane2/3 select */ - <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ - <0x40a8 0x3>, <0x40ac 0x3>; /* SERDES2 lane2/3 select */ + mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */ + <0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */ + <0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */ + <0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */ + <0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */ + <0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */ idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, <J784S4_SERDES0_LANE2_IP3_UNUSED>, @@ -712,6 +712,7 @@ ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; ti,itap-del-sel-sdr25 = <0x0>; + ti,itap-del-sel-ddr50 = <0x2>; ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; @@ -1188,8 +1189,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x80000>, - <0x00 0x35000000 0x00 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x200000>, + <0x00 0x30b00000 0x00 0x20000>, + <0x00 0x30c00000 0x00 0x8000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 37fc48aae6..337122c3f4 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -38,10 +38,18 @@ }; }; - chipid@43000014 { + wkup_conf: bus@43000000 { bootph-all; - compatible = "ti,am654-chipid"; - reg = <0x00 0x43000014 0x00 0x4>; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + bootph-all; + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; secure_proxy_sa3: mailbox@43600000 { @@ -478,8 +486,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts index c4774a42d5..51622896b1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -131,9 +131,7 @@ &qspi { /* MIO 0-5 - U143 */ status = "okay"; spi_flash: flash@0 { /* MT25QU512A */ - compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ - #address-cells = <1>; - #size-cells = <1>; + compatible = "jedec,spi-nor"; /* 64MB */ reg = <0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; @@ -222,9 +220,9 @@ label = "Secure OS Storage"; reg = <0x2280000 0x20000>; /* 128KB */ }; - partition@22A0000 { + partition@22a0000 { label = "User"; - reg = <0x22A0000 0x1d60000>; /* 29.375 MB */ + reg = <0x22a0000 0x1d60000>; /* 29.375 MB */ }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index e821d55d8d..73491626e0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -98,8 +98,12 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@0 { - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index b59e11316b..f767708fb5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -91,12 +91,16 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem2_default>; - phy0: ethernet-phy@5 { - reg = <5>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 38b0a31217..f553b317e6 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -88,8 +88,12 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: ethernet-phy@0 { /* VSC8211 */ - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { /* VSC8211 */ + reg = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 6636e76545..6ec1d98139 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -116,17 +116,21 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy0>; - ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ - reg = <0>; - }; - ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ - reg = <7>; - }; - ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ - reg = <3>; - }; - ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ - reg = <8>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ + reg = <0>; + }; + ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ + reg = <7>; + }; + ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ + reg = <3>; + }; + ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ + reg = <8>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index 0d2ea9c09a..b1857e17ab 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -77,8 +77,12 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem1_default>; - phy0: ethernet-phy@0 { - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index d0091d3cb7..52f998c225 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -123,13 +123,13 @@ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; - si5335_0: si5335_0 { /* clk0_usb - u23 */ + si5335_0: si5335-0 { /* clk0_usb - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5335_1: si5335_1 { /* clk1_dp - u23 */ + si5335_1: si5335-1 { /* clk1_dp - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index b61fc99cd9..eaba466804 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -129,7 +129,7 @@ }; }; - zynqmp_ipi: zynqmp_ipi { + zynqmp_ipi: zynqmp-ipi { bootph-all; compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; @@ -141,6 +141,7 @@ ipi_mailbox_pmu1: mailbox@ff9905c0 { bootph-all; + compatible = "xlnx,zynqmp-ipi-dest-mailbox"; reg = <0x0 0xff9905c0 0x0 0x20>, <0x0 0xff9905e0 0x0 0x20>, <0x0 0xff990e80 0x0 0x20>, @@ -194,12 +195,12 @@ mbox-names = "tx", "rx"; }; - nvmem_firmware { + nvmem-firmware { compatible = "xlnx,zynqmp-nvmem-fw"; #address-cells = <1>; #size-cells = <1>; - soc_revision: soc_revision@0 { + soc_revision: soc-revision@0 { reg = <0x0 0x4>; }; }; @@ -584,8 +585,6 @@ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; @@ -600,8 +599,6 @@ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; @@ -616,8 +613,6 @@ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; @@ -632,8 +627,6 @@ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index b60aa1f893..e6cf3e5d63 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -30,6 +30,9 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_PROFILING=y +CONFIG_KEXEC=y +CONFIG_KEXEC_FILE=y +CONFIG_CRASH_DUMP=y CONFIG_ARCH_ACTIONS=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y @@ -77,9 +80,6 @@ CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y CONFIG_SCHED_SMT=y CONFIG_NUMA=y -CONFIG_KEXEC=y -CONFIG_KEXEC_FILE=y -CONFIG_CRASH_DUMP=y CONFIG_XEN=y CONFIG_COMPAT=y CONFIG_RANDOMIZE_BASE=y @@ -180,8 +180,6 @@ CONFIG_NET_ACT_GATE=m CONFIG_QRTR_SMD=m CONFIG_QRTR_TUN=m CONFIG_CAN=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_M_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_HIDP=m # CONFIG_BT_LE is not set @@ -215,27 +213,27 @@ CONFIG_PCI_PASID=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y CONFIG_PCI_AARDVARK=y -CONFIG_PCI_TEGRA=y -CONFIG_PCIE_RCAR_HOST=y -CONFIG_PCIE_RCAR_EP=y -CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_XGENE=y CONFIG_PCIE_ALTERA=y CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCIE_BRCMSTB=m CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y -CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCIE_MEDIATEK_GEN3=m -CONFIG_PCIE_BRCMSTB=m +CONFIG_PCI_TEGRA=y +CONFIG_PCIE_RCAR_HOST=y +CONFIG_PCIE_RCAR_EP=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCI_XGENE=y CONFIG_PCI_IMX6_HOST=y CONFIG_PCI_LAYERSCAPE=y CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_ROCKCHIP_DW_HOST=y CONFIG_PCIE_KIRIN=y CONFIG_PCIE_HISI_STB=y +CONFIG_PCIE_ARMADA_8K=y CONFIG_PCIE_TEGRA194_HOST=m +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ROCKCHIP_DW_HOST=y CONFIG_PCIE_VISCONTI_HOST=y CONFIG_PCIE_LAYERSCAPE_GEN4=y CONFIG_PCI_ENDPOINT=y @@ -252,9 +250,11 @@ CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_INTEL_STRATIX10_SERVICE=y CONFIG_INTEL_STRATIX10_RSU=m +CONFIG_MTK_ADSP_IPC=m CONFIG_EFI_CAPSULE_LOADER=y CONFIG_IMX_SCU=y -CONFIG_IMX_SCU_PD=y +CONFIG_QCOM_QSEECOM=y +CONFIG_QCOM_QSEECOM_UEFISECAPP=y CONFIG_GNSS=m CONFIG_GNSS_MTK_SERIAL=m CONFIG_MTD=y @@ -276,15 +276,12 @@ CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=m -CONFIG_UBIFS_FS=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_NVME=m CONFIG_QCOM_COINCELL=m CONFIG_QCOM_FASTRPC=m -CONFIG_BATTERY_QCOM_BATTMGR=m -CONFIG_UCSI_PMIC_GLINK=m CONFIG_SRAM=y CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=m @@ -368,6 +365,7 @@ CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_DWMAC_TEGRA=m CONFIG_TI_K3_AM65_CPSW_NUSS=y +CONFIG_TI_ICSSG_PRUETH=m CONFIG_QCOM_IPA=m CONFIG_MESON_GXL_PHY=m CONFIG_AQUANTIA_PHY=y @@ -384,6 +382,8 @@ CONFIG_DP83869_PHY=m CONFIG_DP83TD510_PHY=y CONFIG_VITESSE_PHY=y CONFIG_CAN_FLEXCAN=m +CONFIG_CAN_M_CAN=m +CONFIG_CAN_M_CAN_PLATFORM=m CONFIG_CAN_RCAR=m CONFIG_CAN_RCAR_CANFD=m CONFIG_CAN_MCP251XFD=m @@ -448,6 +448,7 @@ CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=8 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_BCM2835AUX=y @@ -574,9 +575,9 @@ CONFIG_PINCTRL_IMX8DXL=y CONFIG_PINCTRL_IMX8ULP=y CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y -CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ5018=y CONFIG_PINCTRL_IPQ5332=y +CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ6018=y CONFIG_PINCTRL_IPQ9574=y CONFIG_PINCTRL_MSM8916=y @@ -588,34 +589,37 @@ CONFIG_PINCTRL_MSM8998=y CONFIG_PINCTRL_QCM2290=y CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y -CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QDU1000=y CONFIG_PINCTRL_SA8775P=y CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SC7280=y -CONFIG_PINCTRL_SC7280_LPASS_LPI=m CONFIG_PINCTRL_SC8180X=y CONFIG_PINCTRL_SC8280XP=y CONFIG_PINCTRL_SDM660=y CONFIG_PINCTRL_SDM670=y CONFIG_PINCTRL_SDM845=y +CONFIG_PINCTRL_SDX75=y +CONFIG_PINCTRL_SM4450=y CONFIG_PINCTRL_SM6115=y -CONFIG_PINCTRL_SM6115_LPASS_LPI=m CONFIG_PINCTRL_SM6125=y CONFIG_PINCTRL_SM6350=y CONFIG_PINCTRL_SM6375=y CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y -CONFIG_PINCTRL_SM8250_LPASS_LPI=m CONFIG_PINCTRL_SM8350=y -CONFIG_PINCTRL_SM8350_LPASS_LPI=m CONFIG_PINCTRL_SM8450=y +CONFIG_PINCTRL_SM8550=y +CONFIG_PINCTRL_SM8650=y +CONFIG_PINCTRL_X1E80100=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_LPASS_LPI=m +CONFIG_PINCTRL_SC7280_LPASS_LPI=m +CONFIG_PINCTRL_SM6115_LPASS_LPI=m +CONFIG_PINCTRL_SM8250_LPASS_LPI=m +CONFIG_PINCTRL_SM8350_LPASS_LPI=m CONFIG_PINCTRL_SM8450_LPASS_LPI=m CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m -CONFIG_PINCTRL_SM8550=y CONFIG_PINCTRL_SM8550_LPASS_LPI=m -CONFIG_PINCTRL_LPASS_LPI=m -CONFIG_GPIO_AGGREGATOR=m CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y @@ -624,6 +628,7 @@ CONFIG_GPIO_MPC8XXX=y CONFIG_GPIO_MXC=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_SYSCON=y CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_VISCONTI=y CONFIG_GPIO_WCD934X=m @@ -635,7 +640,7 @@ CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_BD9571MWV=m CONFIG_GPIO_MAX77620=y CONFIG_GPIO_SL28CPLD=m -CONFIG_GPIO_SYSCON=y +CONFIG_GPIO_AGGREGATOR=m CONFIG_POWER_RESET_MSM=y CONFIG_POWER_RESET_QCOM_PON=m CONFIG_POWER_RESET_XGENE=y @@ -643,6 +648,7 @@ CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_SYSCON_REBOOT_MODE=y CONFIG_NVMEM_REBOOT_MODE=m +CONFIG_BATTERY_QCOM_BATTMGR=m CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y CONFIG_BATTERY_MAX17042=m @@ -667,14 +673,16 @@ CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_IMX_SC_THERMAL=m CONFIG_IMX8MM_THERMAL=m -CONFIG_QORIQ_THERMAL=m CONFIG_K3_THERMAL=m +CONFIG_QORIQ_THERMAL=m CONFIG_SUN8I_THERMAL=y CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y CONFIG_RZG2L_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_MTK_THERMAL=m +CONFIG_MTK_LVTS_THERMAL=m CONFIG_BCM2711_THERMAL=m CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m @@ -694,6 +702,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ARM_SBSA_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_DW_WATCHDOG=y +CONFIG_K3_RTI_WATCHDOG=m CONFIG_SUNXI_WATCHDOG=m CONFIG_NPCM7XX_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -709,7 +718,6 @@ CONFIG_UNIPHIER_WATCHDOG=y CONFIG_PM8916_WATCHDOG=m CONFIG_BCM2835_WDT=y CONFIG_BCM7038_WDT=m -CONFIG_K3_RTI_WATCHDOG=m CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_I2C=y @@ -726,9 +734,9 @@ CONFIG_MFD_RK8XX_SPI=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SL28CPLD=y CONFIG_RZ_MTU3=y +CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_TPS65219=y CONFIG_MFD_TPS6594_I2C=m -CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_WCD934X=m CONFIG_MFD_KHADAS_MCU=m @@ -737,6 +745,7 @@ CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BD718XX=y CONFIG_REGULATOR_BD9571MWV=y CONFIG_REGULATOR_CROS_EC=y +CONFIG_REGULATOR_DA9211=m CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y @@ -783,6 +792,7 @@ CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SDR_PLATFORM_DRIVERS=y CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CADENCE_CSI2RX=m CONFIG_VIDEO_MEDIATEK_JPEG=m CONFIG_VIDEO_MEDIATEK_VCODEC=m CONFIG_VIDEO_IMX7_CSI=m @@ -804,6 +814,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SUN6I_CSI=m +CONFIG_VIDEO_TI_J721E_CSI2RX=m CONFIG_VIDEO_HANTRO=m CONFIG_VIDEO_IMX219=m CONFIG_VIDEO_IMX412=m @@ -860,6 +871,7 @@ CONFIG_DRM_SAMSUNG_DSIM=m CONFIG_DRM_SII902X=m CONFIG_DRM_SIMPLE_BRIDGE=m CONFIG_DRM_THINE_THC63LVD1024=m +CONFIG_DRM_TOSHIBA_TC358767=m CONFIG_DRM_TOSHIBA_TC358768=m CONFIG_DRM_TI_TFP410=m CONFIG_DRM_TI_SN65DSI83=m @@ -877,17 +889,19 @@ CONFIG_DRM_ETNAVIV=m CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MEDIATEK=m +CONFIG_DRM_MEDIATEK_DP=m CONFIG_DRM_MEDIATEK_HDMI=m CONFIG_DRM_MXSFB=m -CONFIG_DRM_MESON=m CONFIG_DRM_IMX_LCDIF=m +CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m CONFIG_DRM_LIMA=m CONFIG_DRM_PANFROST=m CONFIG_DRM_TIDSS=m +CONFIG_DRM_POWERVR=m CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_EFI=y +CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_LP855X=m CONFIG_LOGO=y @@ -913,6 +927,8 @@ CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m CONFIG_SND_SOC_MT8192=m CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m +CONFIG_SND_SOC_MT8195=m +CONFIG_SND_SOC_MT8195_MT6359=m CONFIG_SND_MESON_AXG_SOUND_CARD=m CONFIG_SND_MESON_GX_SOUND_CARD=m CONFIG_SND_SOC_QCOM=m @@ -920,6 +936,7 @@ CONFIG_SND_SOC_APQ8016_SBC=m CONFIG_SND_SOC_MSM8996=m CONFIG_SND_SOC_SDM845=m CONFIG_SND_SOC_SM8250=m +CONFIG_SND_SOC_SC8280XP=m CONFIG_SND_SOC_SC7180=m CONFIG_SND_SOC_SC7280=m CONFIG_SND_SOC_ROCKCHIP=m @@ -930,6 +947,10 @@ CONFIG_SND_SOC_RK3399_GRU_SOUND=m CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RZ=m +CONFIG_SND_SOC_SOF_TOPLEVEL=y +CONFIG_SND_SOC_SOF_OF=y +CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y +CONFIG_SND_SOC_SOF_MT8195=m CONFIG_SND_SUN8I_CODEC=m CONFIG_SND_SUN8I_CODEC_ANALOG=m CONFIG_SND_SUN50I_CODEC_ANALOG=m @@ -950,6 +971,7 @@ CONFIG_SND_SOC_TEGRA210_ADX=m CONFIG_SND_SOC_TEGRA210_MIXER=m CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m CONFIG_SND_SOC_DAVINCI_MCASP=m +CONFIG_SND_SOC_J721E_EVM=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SOC_DA7213=m CONFIG_SND_SOC_ES7134=m @@ -961,7 +983,6 @@ CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m CONFIG_SND_SOC_PCM3168A_I2C=m CONFIG_SND_SOC_RK817=m CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_J721E_EVM=m CONFIG_SND_SOC_RT5659=m CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m CONFIG_SND_SOC_SIMPLE_MUX=m @@ -977,6 +998,8 @@ CONFIG_SND_SOC_WM8960=m CONFIG_SND_SOC_WM8962=m CONFIG_SND_SOC_WM8978=m CONFIG_SND_SOC_WSA881X=m +CONFIG_SND_SOC_WSA883X=m +CONFIG_SND_SOC_WSA884X=m CONFIG_SND_SOC_NAU8822=m CONFIG_SND_SOC_LPASS_WSA_MACRO=m CONFIG_SND_SOC_LPASS_VA_MACRO=m @@ -1047,14 +1070,15 @@ CONFIG_TYPEC=m CONFIG_TYPEC_TCPM=m CONFIG_TYPEC_TCPCI=m CONFIG_TYPEC_FUSB302=m -CONFIG_TYPEC_TPS6598X=m -CONFIG_TYPEC_HD3SS3220=m CONFIG_TYPEC_QCOM_PMIC=m CONFIG_TYPEC_UCSI=m -CONFIG_TYPEC_MUX_FSA4480=m -CONFIG_TYPEC_MUX_NB7VPQ904M=m CONFIG_UCSI_CCG=m +CONFIG_UCSI_PMIC_GLINK=m +CONFIG_TYPEC_TPS6598X=m +CONFIG_TYPEC_HD3SS3220=m +CONFIG_TYPEC_MUX_FSA4480=m CONFIG_TYPEC_MUX_GPIO_SBU=m +CONFIG_TYPEC_MUX_NB7VPQ904M=m CONFIG_TYPEC_DP_ALTMODE=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 @@ -1183,6 +1207,7 @@ CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y CONFIG_CROS_EC_RPMSG=m CONFIG_CROS_EC_SPI=y +CONFIG_CROS_KBD_LED_BACKLIGHT=m CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_RK808=y CONFIG_COMMON_CLK_SCMI=y @@ -1192,6 +1217,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_COMMON_CLK_PWM=y CONFIG_COMMON_CLK_RS9_PCIE=y +CONFIG_COMMON_CLK_VC3=y CONFIG_COMMON_CLK_VC5=y CONFIG_COMMON_CLK_BD718XX=m CONFIG_CLK_RASPBERRYPI=m @@ -1216,30 +1242,32 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y CONFIG_COMMON_CLK_MT8192_VDECSYS=y CONFIG_COMMON_CLK_MT8192_VENCSYS=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_CLK_X1E80100_GCC=y CONFIG_QCOM_A53PLL=y CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_APCC_MSM8996=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_APSS_6018=y -CONFIG_IPQ_GCC_5332=y CONFIG_IPQ_APSS_5018=y CONFIG_IPQ_GCC_5018=y +CONFIG_IPQ_GCC_5332=y CONFIG_IPQ_GCC_6018=y CONFIG_IPQ_GCC_8074=y CONFIG_IPQ_GCC_9574=y CONFIG_MSM_GCC_8916=y +CONFIG_MSM_MMCC_8994=m CONFIG_MSM_GCC_8994=y CONFIG_MSM_GCC_8996=y -CONFIG_MSM_MMCC_8994=m CONFIG_MSM_MMCC_8996=m -CONFIG_MSM_MMCC_8998=m CONFIG_MSM_GCC_8998=y +CONFIG_MSM_MMCC_8998=m CONFIG_QCM_GCC_2290=y CONFIG_QCM_DISPCC_2290=m CONFIG_QCS_GCC_404=y -CONFIG_SA_GCC_8775P=y +CONFIG_SC_CAMCC_8280XP=m CONFIG_SC_DISPCC_8280XP=m +CONFIG_SA_GCC_8775P=y CONFIG_SA_GPUCC_8775P=m CONFIG_SC_GCC_7180=y CONFIG_SC_GCC_7280=y @@ -1252,19 +1280,27 @@ CONFIG_SDM_GPUCC_845=y CONFIG_SDM_VIDEOCC_845=y CONFIG_SDM_DISPCC_845=y CONFIG_SDM_LPASSCC_845=m +CONFIG_SDX_GCC_75=y CONFIG_SM_CAMCC_8250=m CONFIG_SM_DISPCC_6115=m CONFIG_SM_DISPCC_8250=y CONFIG_SM_DISPCC_8450=m CONFIG_SM_DISPCC_8550=m +CONFIG_SM_DISPCC_8650=m +CONFIG_SM_GCC_4450=y CONFIG_SM_GCC_6115=y CONFIG_SM_GCC_8350=y CONFIG_SM_GCC_8450=y CONFIG_SM_GCC_8550=y -CONFIG_SM_TCSRCC_8550=y +CONFIG_SM_GCC_8650=y CONFIG_SM_GPUCC_6115=m CONFIG_SM_GPUCC_8150=y CONFIG_SM_GPUCC_8250=y +CONFIG_SM_GPUCC_8450=m +CONFIG_SM_GPUCC_8550=m +CONFIG_SM_GPUCC_8650=m +CONFIG_SM_TCSRCC_8550=y +CONFIG_SM_TCSRCC_8650=y CONFIG_SM_VIDEOCC_8250=y CONFIG_QCOM_HFPLL=y CONFIG_CLK_GFM_LPASS_SM8250=m @@ -1279,6 +1315,7 @@ CONFIG_OMAP2PLUS_MBOX=m CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y CONFIG_QCOM_APCS_IPC=y +CONFIG_MTK_ADSP_MBOX=m CONFIG_QCOM_IPCC=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y @@ -1288,14 +1325,14 @@ CONFIG_MTK_IOMMU=y CONFIG_QCOM_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_IMX_REMOTEPROC=y -CONFIG_TI_K3_R5_REMOTEPROC=m -CONFIG_TI_K3_DSP_REMOTEPROC=m CONFIG_MTK_SCP=m CONFIG_QCOM_Q6V5_ADSP=m CONFIG_QCOM_Q6V5_MSS=m CONFIG_QCOM_Q6V5_PAS=m CONFIG_QCOM_SYSMON=m CONFIG_QCOM_WCNSS_PIL=m +CONFIG_TI_K3_DSP_REMOTEPROC=m +CONFIG_TI_K3_R5_REMOTEPROC=m CONFIG_RPMSG_CHAR=m CONFIG_RPMSG_CTRL=m CONFIG_RPMSG_QCOM_GLINK_RPM=y @@ -1304,8 +1341,6 @@ CONFIG_RPMSG_QCOM_SMD=y CONFIG_RPMSG_VIRTIO=y CONFIG_SOUNDWIRE=m CONFIG_SOUNDWIRE_QCOM=m -CONFIG_OWL_PM_DOMAINS=y -CONFIG_RASPBERRYPI_POWER=y CONFIG_FSL_DPAA=y CONFIG_FSL_MC_DPIO=y CONFIG_FSL_RCPM=y @@ -1315,15 +1350,12 @@ CONFIG_MTK_PMIC_WRAP=y CONFIG_MTK_SVS=m CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_COMMAND_DB=y -CONFIG_QCOM_CPR=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_LLCC=m CONFIG_QCOM_OCMEM=m CONFIG_QCOM_PMIC_GLINK=m CONFIG_QCOM_RMTFS_MEM=m CONFIG_QCOM_RPMH=y -CONFIG_QCOM_RPMHPD=y -CONFIG_QCOM_RPMPD=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y @@ -1355,14 +1387,20 @@ CONFIG_ARCH_R9A07G054=y CONFIG_ARCH_R9A08G045=y CONFIG_ARCH_R9A09G011=y CONFIG_ROCKCHIP_IODOMAIN=y -CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_TEGRA_234_SOC=y -CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_TI_PRUSS=m +CONFIG_OWL_PM_DOMAINS=y +CONFIG_RASPBERRYPI_POWER=y +CONFIG_IMX_SCU_PD=y +CONFIG_QCOM_CPR=y +CONFIG_QCOM_RPMHPD=y +CONFIG_QCOM_RPMPD=y +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_ARM_IMX_BUS_DEVFREQ=y CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m @@ -1421,6 +1459,7 @@ CONFIG_PHY_XGENE=y CONFIG_PHY_CAN_TRANSCEIVER=m CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_CADENCE_TORRENT=m +CONFIG_PHY_CADENCE_DPHY_RX=m CONFIG_PHY_CADENCE_SIERRA=m CONFIG_PHY_MIXEL_MIPI_DPHY=m CONFIG_PHY_FSL_IMX8M_PCIE=y @@ -1430,17 +1469,17 @@ CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_MTK_TPHY=y CONFIG_PHY_QCOM_EDP=m -CONFIG_PHY_QCOM_EUSB2_REPEATER=m CONFIG_PHY_QCOM_PCIE2=m CONFIG_PHY_QCOM_QMP=m CONFIG_PHY_QCOM_QUSB2=m CONFIG_PHY_QCOM_SNPS_EUSB2=m +CONFIG_PHY_QCOM_EUSB2_REPEATER=m +CONFIG_PHY_QCOM_M31_USB=m CONFIG_PHY_QCOM_USB_HS=m CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m CONFIG_PHY_QCOM_USB_HS_28NM=m CONFIG_PHY_QCOM_USB_SS=m CONFIG_PHY_QCOM_SGMII_ETH=m -CONFIG_PHY_QCOM_M31_USB=m CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y CONFIG_PHY_RCAR_GEN3_PCIE=y CONFIG_PHY_RCAR_GEN3_USB2=y @@ -1462,7 +1501,6 @@ CONFIG_PHY_J721E_WIZ=m CONFIG_ARM_CCI_PMU=m CONFIG_ARM_CCN=m CONFIG_ARM_CMN=m -CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m CONFIG_ARM_SMMU_V3_PMU=m CONFIG_ARM_DSU_PMU=m CONFIG_FSL_IMX8_DDR_PMU=m @@ -1471,6 +1509,7 @@ CONFIG_QCOM_L3_PMU=y CONFIG_ARM_SPE_PMU=m CONFIG_ARM_DMC620_PMU=m CONFIG_HISI_PMU=y +CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m CONFIG_MESON_DDR_PMU=m CONFIG_NVMEM_LAYOUT_SL28_VPD=m CONFIG_NVMEM_IMX_OCOTP=y @@ -1519,11 +1558,14 @@ CONFIG_INTERCONNECT_QCOM_SC7280=y CONFIG_INTERCONNECT_QCOM_SC8180X=y CONFIG_INTERCONNECT_QCOM_SC8280XP=y CONFIG_INTERCONNECT_QCOM_SDM845=y +CONFIG_INTERCONNECT_QCOM_SDX75=y CONFIG_INTERCONNECT_QCOM_SM8150=m CONFIG_INTERCONNECT_QCOM_SM8250=m CONFIG_INTERCONNECT_QCOM_SM8350=m CONFIG_INTERCONNECT_QCOM_SM8450=y CONFIG_INTERCONNECT_QCOM_SM8550=y +CONFIG_INTERCONNECT_QCOM_SM8650=y +CONFIG_INTERCONNECT_QCOM_X1E80100=y CONFIG_COUNTER=m CONFIG_RZ_MTU3_CNT=m CONFIG_HTE=y @@ -1546,6 +1588,7 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y +CONFIG_UBIFS_FS=m CONFIG_SQUASHFS=y CONFIG_NFS_FS=y CONFIG_NFS_V4=y diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 6d06b448a6..eb7b423ba4 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -231,7 +231,7 @@ config CRYPTO_SM4_ARM64_CE - NEON (Advanced SIMD) extensions config CRYPTO_SM4_ARM64_CE_BLK - tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR/XTS (ARMv8 Crypto Extensions)" + tristate "Ciphers: SM4, modes: ECB/CBC/CTR/XTS (ARMv8 Crypto Extensions)" depends on KERNEL_MODE_NEON select CRYPTO_SKCIPHER select CRYPTO_SM4 @@ -240,7 +240,6 @@ config CRYPTO_SM4_ARM64_CE_BLK with block cipher modes: - ECB (Electronic Codebook) mode (NIST SP800-38A) - CBC (Cipher Block Chaining) mode (NIST SP800-38A) - - CFB (Cipher Feedback) mode (NIST SP800-38A) - CTR (Counter) mode (NIST SP800-38A) - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E and IEEE 1619) @@ -250,7 +249,7 @@ config CRYPTO_SM4_ARM64_CE_BLK - NEON (Advanced SIMD) extensions config CRYPTO_SM4_ARM64_NEON_BLK - tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR (NEON)" + tristate "Ciphers: SM4, modes: ECB/CBC/CTR (NEON)" depends on KERNEL_MODE_NEON select CRYPTO_SKCIPHER select CRYPTO_SM4 @@ -259,7 +258,6 @@ config CRYPTO_SM4_ARM64_NEON_BLK with block cipher modes: - ECB (Electronic Codebook) mode (NIST SP800-38A) - CBC (Cipher Block Chaining) mode (NIST SP800-38A) - - CFB (Cipher Feedback) mode (NIST SP800-38A) - CTR (Counter) mode (NIST SP800-38A) Architecture: arm64 using: diff --git a/arch/arm64/crypto/sm4-ce-core.S b/arch/arm64/crypto/sm4-ce-core.S index 877b80c54a..1f3625c2c6 100644 --- a/arch/arm64/crypto/sm4-ce-core.S +++ b/arch/arm64/crypto/sm4-ce-core.S @@ -403,164 +403,6 @@ SYM_FUNC_START(sm4_ce_cbc_cts_dec) SYM_FUNC_END(sm4_ce_cbc_cts_dec) .align 3 -SYM_FUNC_START(sm4_ce_cfb_enc) - /* input: - * x0: round key array, CTX - * x1: dst - * x2: src - * x3: iv (big endian, 128 bit) - * w4: nblocks - */ - SM4_PREPARE(x0) - - ld1 {RIV.16b}, [x3] - -.Lcfb_enc_loop_4x: - cmp w4, #4 - blt .Lcfb_enc_loop_1x - - sub w4, w4, #4 - - ld1 {v0.16b-v3.16b}, [x2], #64 - - rev32 v8.16b, RIV.16b - SM4_CRYPT_BLK_BE(v8) - eor v0.16b, v0.16b, v8.16b - - rev32 v8.16b, v0.16b - SM4_CRYPT_BLK_BE(v8) - eor v1.16b, v1.16b, v8.16b - - rev32 v8.16b, v1.16b - SM4_CRYPT_BLK_BE(v8) - eor v2.16b, v2.16b, v8.16b - - rev32 v8.16b, v2.16b - SM4_CRYPT_BLK_BE(v8) - eor v3.16b, v3.16b, v8.16b - - st1 {v0.16b-v3.16b}, [x1], #64 - mov RIV.16b, v3.16b - - cbz w4, .Lcfb_enc_end - b .Lcfb_enc_loop_4x - -.Lcfb_enc_loop_1x: - sub w4, w4, #1 - - ld1 {v0.16b}, [x2], #16 - - SM4_CRYPT_BLK(RIV) - eor RIV.16b, RIV.16b, v0.16b - - st1 {RIV.16b}, [x1], #16 - - cbnz w4, .Lcfb_enc_loop_1x - -.Lcfb_enc_end: - /* store new IV */ - st1 {RIV.16b}, [x3] - - ret -SYM_FUNC_END(sm4_ce_cfb_enc) - -.align 3 -SYM_FUNC_START(sm4_ce_cfb_dec) - /* input: - * x0: round key array, CTX - * x1: dst - * x2: src - * x3: iv (big endian, 128 bit) - * w4: nblocks - */ - SM4_PREPARE(x0) - - ld1 {RIV.16b}, [x3] - -.Lcfb_dec_loop_8x: - sub w4, w4, #8 - tbnz w4, #31, .Lcfb_dec_4x - - ld1 {v0.16b-v3.16b}, [x2], #64 - ld1 {v4.16b-v7.16b}, [x2], #64 - - rev32 v8.16b, RIV.16b - rev32 v9.16b, v0.16b - rev32 v10.16b, v1.16b - rev32 v11.16b, v2.16b - rev32 v12.16b, v3.16b - rev32 v13.16b, v4.16b - rev32 v14.16b, v5.16b - rev32 v15.16b, v6.16b - - SM4_CRYPT_BLK8_BE(v8, v9, v10, v11, v12, v13, v14, v15) - - mov RIV.16b, v7.16b - - eor v0.16b, v0.16b, v8.16b - eor v1.16b, v1.16b, v9.16b - eor v2.16b, v2.16b, v10.16b - eor v3.16b, v3.16b, v11.16b - eor v4.16b, v4.16b, v12.16b - eor v5.16b, v5.16b, v13.16b - eor v6.16b, v6.16b, v14.16b - eor v7.16b, v7.16b, v15.16b - - st1 {v0.16b-v3.16b}, [x1], #64 - st1 {v4.16b-v7.16b}, [x1], #64 - - cbz w4, .Lcfb_dec_end - b .Lcfb_dec_loop_8x - -.Lcfb_dec_4x: - add w4, w4, #8 - cmp w4, #4 - blt .Lcfb_dec_loop_1x - - sub w4, w4, #4 - - ld1 {v0.16b-v3.16b}, [x2], #64 - - rev32 v8.16b, RIV.16b - rev32 v9.16b, v0.16b - rev32 v10.16b, v1.16b - rev32 v11.16b, v2.16b - - SM4_CRYPT_BLK4_BE(v8, v9, v10, v11) - - mov RIV.16b, v3.16b - - eor v0.16b, v0.16b, v8.16b - eor v1.16b, v1.16b, v9.16b - eor v2.16b, v2.16b, v10.16b - eor v3.16b, v3.16b, v11.16b - - st1 {v0.16b-v3.16b}, [x1], #64 - - cbz w4, .Lcfb_dec_end - -.Lcfb_dec_loop_1x: - sub w4, w4, #1 - - ld1 {v0.16b}, [x2], #16 - - SM4_CRYPT_BLK(RIV) - - eor RIV.16b, RIV.16b, v0.16b - st1 {RIV.16b}, [x1], #16 - - mov RIV.16b, v0.16b - - cbnz w4, .Lcfb_dec_loop_1x - -.Lcfb_dec_end: - /* store new IV */ - st1 {RIV.16b}, [x3] - - ret -SYM_FUNC_END(sm4_ce_cfb_dec) - -.align 3 SYM_FUNC_START(sm4_ce_ctr_enc) /* input: * x0: round key array, CTX diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c index 0a2d32ed3b..43741bed87 100644 --- a/arch/arm64/crypto/sm4-ce-glue.c +++ b/arch/arm64/crypto/sm4-ce-glue.c @@ -37,10 +37,6 @@ asmlinkage void sm4_ce_cbc_cts_enc(const u32 *rkey, u8 *dst, const u8 *src, u8 *iv, unsigned int nbytes); asmlinkage void sm4_ce_cbc_cts_dec(const u32 *rkey, u8 *dst, const u8 *src, u8 *iv, unsigned int nbytes); -asmlinkage void sm4_ce_cfb_enc(const u32 *rkey, u8 *dst, const u8 *src, - u8 *iv, unsigned int nblks); -asmlinkage void sm4_ce_cfb_dec(const u32 *rkey, u8 *dst, const u8 *src, - u8 *iv, unsigned int nblks); asmlinkage void sm4_ce_ctr_enc(const u32 *rkey, u8 *dst, const u8 *src, u8 *iv, unsigned int nblks); asmlinkage void sm4_ce_xts_enc(const u32 *rkey1, u8 *dst, const u8 *src, @@ -56,7 +52,6 @@ asmlinkage void sm4_ce_mac_update(const u32 *rkey_enc, u8 *digest, EXPORT_SYMBOL(sm4_ce_expand_key); EXPORT_SYMBOL(sm4_ce_crypt_block); EXPORT_SYMBOL(sm4_ce_cbc_enc); -EXPORT_SYMBOL(sm4_ce_cfb_enc); struct sm4_xts_ctx { struct sm4_ctx key1; @@ -280,90 +275,6 @@ static int sm4_cbc_cts_decrypt(struct skcipher_request *req) return sm4_cbc_cts_crypt(req, false); } -static int sm4_cfb_encrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - unsigned int nbytes; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - while ((nbytes = walk.nbytes) > 0) { - const u8 *src = walk.src.virt.addr; - u8 *dst = walk.dst.virt.addr; - unsigned int nblks; - - kernel_neon_begin(); - - nblks = BYTES2BLKS(nbytes); - if (nblks) { - sm4_ce_cfb_enc(ctx->rkey_enc, dst, src, walk.iv, nblks); - dst += nblks * SM4_BLOCK_SIZE; - src += nblks * SM4_BLOCK_SIZE; - nbytes -= nblks * SM4_BLOCK_SIZE; - } - - /* tail */ - if (walk.nbytes == walk.total && nbytes > 0) { - u8 keystream[SM4_BLOCK_SIZE]; - - sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv); - crypto_xor_cpy(dst, src, keystream, nbytes); - nbytes = 0; - } - - kernel_neon_end(); - - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int sm4_cfb_decrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - unsigned int nbytes; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - while ((nbytes = walk.nbytes) > 0) { - const u8 *src = walk.src.virt.addr; - u8 *dst = walk.dst.virt.addr; - unsigned int nblks; - - kernel_neon_begin(); - - nblks = BYTES2BLKS(nbytes); - if (nblks) { - sm4_ce_cfb_dec(ctx->rkey_enc, dst, src, walk.iv, nblks); - dst += nblks * SM4_BLOCK_SIZE; - src += nblks * SM4_BLOCK_SIZE; - nbytes -= nblks * SM4_BLOCK_SIZE; - } - - /* tail */ - if (walk.nbytes == walk.total && nbytes > 0) { - u8 keystream[SM4_BLOCK_SIZE]; - - sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv); - crypto_xor_cpy(dst, src, keystream, nbytes); - nbytes = 0; - } - - kernel_neon_end(); - - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - static int sm4_ctr_crypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); @@ -544,22 +455,6 @@ static struct skcipher_alg sm4_algs[] = { .decrypt = sm4_cbc_decrypt, }, { .base = { - .cra_name = "cfb(sm4)", - .cra_driver_name = "cfb-sm4-ce", - .cra_priority = 400, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct sm4_ctx), - .cra_module = THIS_MODULE, - }, - .min_keysize = SM4_KEY_SIZE, - .max_keysize = SM4_KEY_SIZE, - .ivsize = SM4_BLOCK_SIZE, - .chunksize = SM4_BLOCK_SIZE, - .setkey = sm4_setkey, - .encrypt = sm4_cfb_encrypt, - .decrypt = sm4_cfb_decrypt, - }, { - .base = { .cra_name = "ctr(sm4)", .cra_driver_name = "ctr-sm4-ce", .cra_priority = 400, @@ -869,12 +764,11 @@ static void __exit sm4_exit(void) module_cpu_feature_match(SM4, sm4_init); module_exit(sm4_exit); -MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR/XTS using ARMv8 Crypto Extensions"); +MODULE_DESCRIPTION("SM4 ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); MODULE_ALIAS_CRYPTO("sm4-ce"); MODULE_ALIAS_CRYPTO("sm4"); MODULE_ALIAS_CRYPTO("ecb(sm4)"); MODULE_ALIAS_CRYPTO("cbc(sm4)"); -MODULE_ALIAS_CRYPTO("cfb(sm4)"); MODULE_ALIAS_CRYPTO("ctr(sm4)"); MODULE_ALIAS_CRYPTO("cts(cbc(sm4))"); MODULE_ALIAS_CRYPTO("xts(sm4)"); diff --git a/arch/arm64/crypto/sm4-ce.h b/arch/arm64/crypto/sm4-ce.h index 109c21b375..1e235c4371 100644 --- a/arch/arm64/crypto/sm4-ce.h +++ b/arch/arm64/crypto/sm4-ce.h @@ -11,6 +11,3 @@ void sm4_ce_crypt_block(const u32 *rkey, u8 *dst, const u8 *src); void sm4_ce_cbc_enc(const u32 *rkey_enc, u8 *dst, const u8 *src, u8 *iv, unsigned int nblocks); - -void sm4_ce_cfb_enc(const u32 *rkey_enc, u8 *dst, const u8 *src, - u8 *iv, unsigned int nblocks); diff --git a/arch/arm64/crypto/sm4-neon-core.S b/arch/arm64/crypto/sm4-neon-core.S index f295b4b7d7..734dc71936 100644 --- a/arch/arm64/crypto/sm4-neon-core.S +++ b/arch/arm64/crypto/sm4-neon-core.S @@ -438,119 +438,6 @@ SYM_FUNC_START(sm4_neon_cbc_dec) SYM_FUNC_END(sm4_neon_cbc_dec) .align 3 -SYM_FUNC_START(sm4_neon_cfb_dec) - /* input: - * x0: round key array, CTX - * x1: dst - * x2: src - * x3: iv (big endian, 128 bit) - * w4: nblocks - */ - SM4_PREPARE() - - ld1 {v0.16b}, [x3] - -.Lcfb_dec_loop_8x: - sub w4, w4, #8 - tbnz w4, #31, .Lcfb_dec_4x - - ld1 {v1.16b-v3.16b}, [x2], #48 - ld4 {v4.4s-v7.4s}, [x2] - - transpose_4x4(v0, v1, v2, v3) - - SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7) - - sub x2, x2, #48 - ld1 {RTMP0.16b-RTMP3.16b}, [x2], #64 - ld1 {RTMP4.16b-RTMP7.16b}, [x2], #64 - - eor v0.16b, v0.16b, RTMP0.16b - eor v1.16b, v1.16b, RTMP1.16b - eor v2.16b, v2.16b, RTMP2.16b - eor v3.16b, v3.16b, RTMP3.16b - eor v4.16b, v4.16b, RTMP4.16b - eor v5.16b, v5.16b, RTMP5.16b - eor v6.16b, v6.16b, RTMP6.16b - eor v7.16b, v7.16b, RTMP7.16b - - st1 {v0.16b-v3.16b}, [x1], #64 - st1 {v4.16b-v7.16b}, [x1], #64 - - mov v0.16b, RTMP7.16b - - cbz w4, .Lcfb_dec_end - b .Lcfb_dec_loop_8x - -.Lcfb_dec_4x: - add w4, w4, #8 - cmp w4, #4 - blt .Lcfb_dec_tail - - sub w4, w4, #4 - - ld1 {v4.16b-v7.16b}, [x2], #64 - - rev32 v0.16b, v0.16b /* v0 is IV register */ - rev32 v1.16b, v4.16b - rev32 v2.16b, v5.16b - rev32 v3.16b, v6.16b - - transpose_4x4(v0, v1, v2, v3) - - SM4_CRYPT_BLK4_BE(v0, v1, v2, v3) - - eor v0.16b, v0.16b, v4.16b - eor v1.16b, v1.16b, v5.16b - eor v2.16b, v2.16b, v6.16b - eor v3.16b, v3.16b, v7.16b - - st1 {v0.16b-v3.16b}, [x1], #64 - - mov v0.16b, v7.16b - - cbz w4, .Lcfb_dec_end - -.Lcfb_dec_tail: - cmp w4, #2 - ld1 {v4.16b}, [x2], #16 - blt .Lcfb_dec_tail_load_done - ld1 {v5.16b}, [x2], #16 - beq .Lcfb_dec_tail_load_done - ld1 {v6.16b}, [x2], #16 - -.Lcfb_dec_tail_load_done: - rev32 v0.16b, v0.16b /* v0 is IV register */ - rev32 v1.16b, v4.16b - rev32 v2.16b, v5.16b - - transpose_4x4(v0, v1, v2, v3) - - SM4_CRYPT_BLK4_BE(v0, v1, v2, v3) - - cmp w4, #2 - eor v0.16b, v0.16b, v4.16b - st1 {v0.16b}, [x1], #16 - mov v0.16b, v4.16b - blt .Lcfb_dec_end - - eor v1.16b, v1.16b, v5.16b - st1 {v1.16b}, [x1], #16 - mov v0.16b, v5.16b - beq .Lcfb_dec_end - - eor v2.16b, v2.16b, v6.16b - st1 {v2.16b}, [x1], #16 - mov v0.16b, v6.16b - -.Lcfb_dec_end: - /* store new IV */ - st1 {v0.16b}, [x3] - - ret -SYM_FUNC_END(sm4_neon_cfb_dec) - -.align 3 SYM_FUNC_START(sm4_neon_ctr_crypt) /* input: * x0: round key array, CTX diff --git a/arch/arm64/crypto/sm4-neon-glue.c b/arch/arm64/crypto/sm4-neon-glue.c index 7b19accf5c..e3500aca2d 100644 --- a/arch/arm64/crypto/sm4-neon-glue.c +++ b/arch/arm64/crypto/sm4-neon-glue.c @@ -22,8 +22,6 @@ asmlinkage void sm4_neon_crypt(const u32 *rkey, u8 *dst, const u8 *src, unsigned int nblocks); asmlinkage void sm4_neon_cbc_dec(const u32 *rkey_dec, u8 *dst, const u8 *src, u8 *iv, unsigned int nblocks); -asmlinkage void sm4_neon_cfb_dec(const u32 *rkey_enc, u8 *dst, const u8 *src, - u8 *iv, unsigned int nblocks); asmlinkage void sm4_neon_ctr_crypt(const u32 *rkey_enc, u8 *dst, const u8 *src, u8 *iv, unsigned int nblocks); @@ -142,90 +140,6 @@ static int sm4_cbc_decrypt(struct skcipher_request *req) return err; } -static int sm4_cfb_encrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - unsigned int nbytes; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - while ((nbytes = walk.nbytes) > 0) { - u8 keystream[SM4_BLOCK_SIZE]; - const u8 *iv = walk.iv; - const u8 *src = walk.src.virt.addr; - u8 *dst = walk.dst.virt.addr; - - while (nbytes >= SM4_BLOCK_SIZE) { - sm4_crypt_block(ctx->rkey_enc, keystream, iv); - crypto_xor_cpy(dst, src, keystream, SM4_BLOCK_SIZE); - iv = dst; - src += SM4_BLOCK_SIZE; - dst += SM4_BLOCK_SIZE; - nbytes -= SM4_BLOCK_SIZE; - } - if (iv != walk.iv) - memcpy(walk.iv, iv, SM4_BLOCK_SIZE); - - /* tail */ - if (walk.nbytes == walk.total && nbytes > 0) { - sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv); - crypto_xor_cpy(dst, src, keystream, nbytes); - nbytes = 0; - } - - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int sm4_cfb_decrypt(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - unsigned int nbytes; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - while ((nbytes = walk.nbytes) > 0) { - const u8 *src = walk.src.virt.addr; - u8 *dst = walk.dst.virt.addr; - unsigned int nblocks; - - nblocks = nbytes / SM4_BLOCK_SIZE; - if (nblocks) { - kernel_neon_begin(); - - sm4_neon_cfb_dec(ctx->rkey_enc, dst, src, - walk.iv, nblocks); - - kernel_neon_end(); - - dst += nblocks * SM4_BLOCK_SIZE; - src += nblocks * SM4_BLOCK_SIZE; - nbytes -= nblocks * SM4_BLOCK_SIZE; - } - - /* tail */ - if (walk.nbytes == walk.total && nbytes > 0) { - u8 keystream[SM4_BLOCK_SIZE]; - - sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv); - crypto_xor_cpy(dst, src, keystream, nbytes); - nbytes = 0; - } - - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - static int sm4_ctr_crypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); @@ -303,22 +217,6 @@ static struct skcipher_alg sm4_algs[] = { .decrypt = sm4_cbc_decrypt, }, { .base = { - .cra_name = "cfb(sm4)", - .cra_driver_name = "cfb-sm4-neon", - .cra_priority = 200, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct sm4_ctx), - .cra_module = THIS_MODULE, - }, - .min_keysize = SM4_KEY_SIZE, - .max_keysize = SM4_KEY_SIZE, - .ivsize = SM4_BLOCK_SIZE, - .chunksize = SM4_BLOCK_SIZE, - .setkey = sm4_setkey, - .encrypt = sm4_cfb_encrypt, - .decrypt = sm4_cfb_decrypt, - }, { - .base = { .cra_name = "ctr(sm4)", .cra_driver_name = "ctr-sm4-neon", .cra_priority = 200, @@ -349,12 +247,11 @@ static void __exit sm4_exit(void) module_init(sm4_init); module_exit(sm4_exit); -MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR using ARMv8 NEON"); +MODULE_DESCRIPTION("SM4 ECB/CBC/CTR using ARMv8 NEON"); MODULE_ALIAS_CRYPTO("sm4-neon"); MODULE_ALIAS_CRYPTO("sm4"); MODULE_ALIAS_CRYPTO("ecb(sm4)"); MODULE_ALIAS_CRYPTO("cbc(sm4)"); -MODULE_ALIAS_CRYPTO("cfb(sm4)"); MODULE_ALIAS_CRYPTO("ctr(sm4)"); MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>"); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 376a980f2b..513787e433 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -12,7 +12,7 @@ #ifndef __ASM_ASSEMBLER_H #define __ASM_ASSEMBLER_H -#include <asm-generic/export.h> +#include <linux/export.h> #include <asm/alternative.h> #include <asm/asm-bug.h> @@ -760,32 +760,25 @@ alternative_endif .endm /* - * Check whether preempt/bh-disabled asm code should yield as soon as - * it is able. This is the case if we are currently running in task - * context, and either a softirq is pending, or the TIF_NEED_RESCHED - * flag is set and re-enabling preemption a single time would result in - * a preempt count of zero. (Note that the TIF_NEED_RESCHED flag is - * stored negated in the top word of the thread_info::preempt_count + * Check whether asm code should yield as soon as it is able. This is + * the case if we are currently running in task context, and the + * TIF_NEED_RESCHED flag is set. (Note that the TIF_NEED_RESCHED flag + * is stored negated in the top word of the thread_info::preempt_count * field) */ - .macro cond_yield, lbl:req, tmp:req, tmp2:req + .macro cond_yield, lbl:req, tmp:req, tmp2 +#ifdef CONFIG_PREEMPT_VOLUNTARY get_current_task \tmp ldr \tmp, [\tmp, #TSK_TI_PREEMPT] /* * If we are serving a softirq, there is no point in yielding: the * softirq will not be preempted no matter what we do, so we should - * run to completion as quickly as we can. + * run to completion as quickly as we can. The preempt_count field will + * have BIT(SOFTIRQ_SHIFT) set in this case, so the zero check will + * catch this case too. */ - tbnz \tmp, #SOFTIRQ_SHIFT, .Lnoyield_\@ -#ifdef CONFIG_PREEMPTION - sub \tmp, \tmp, #PREEMPT_DISABLE_OFFSET cbz \tmp, \lbl #endif - adr_l \tmp, irq_stat + IRQ_CPUSTAT_SOFTIRQ_PENDING - get_this_cpu_offset \tmp2 - ldr w\tmp, [\tmp, \tmp2] - cbnz w\tmp, \lbl // yield on pending softirq in task context -.Lnoyield_\@: .endm /* diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index ceb368d33b..06a4670bdb 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -58,7 +58,6 @@ static inline unsigned int arch_slab_minalign(void) #define CTR_L1IP(ctr) SYS_FIELD_GET(CTR_EL0, L1Ip, ctr) #define ICACHEF_ALIASING 0 -#define ICACHEF_VPIPT 1 extern unsigned long __icache_flags; /* @@ -70,11 +69,6 @@ static inline int icache_is_aliasing(void) return test_bit(ICACHEF_ALIASING, &__icache_flags); } -static __always_inline int icache_is_vpipt(void) -{ - return test_bit(ICACHEF_VPIPT, &__icache_flags); -} - static inline u32 cache_type_cwg(void) { return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype()); diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h index f3034099fd..b1e43f56ee 100644 --- a/arch/arm64/include/asm/cpu.h +++ b/arch/arm64/include/asm/cpu.h @@ -38,7 +38,6 @@ struct cpuinfo_32bit { }; struct cpuinfo_arm64 { - struct cpu cpu; struct kobject kobj; u64 reg_ctr; u64 reg_cntfrq; diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index f6d416fe49..bd8d4ca81a 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -83,7 +83,7 @@ struct arm64_ftr_bits { * to full-0 denotes that this field has no override * * A @mask field set to full-0 with the corresponding @val field set - * to full-1 denotes thath this field has an invalid override. + * to full-1 denotes that this field has an invalid override. */ struct arm64_ftr_override { u64 val; @@ -617,6 +617,7 @@ static inline bool id_aa64pfr1_mte(u64 pfr1) return val >= ID_AA64PFR1_EL1_MTE_MTE2; } +void __init setup_boot_cpu_features(void); void __init setup_system_features(void); void __init setup_user_features(void); @@ -819,6 +820,11 @@ static inline bool system_supports_tlb_range(void) return alternative_has_cap_unlikely(ARM64_HAS_TLB_RANGE); } +static inline bool system_supports_lpa2(void) +{ + return cpus_have_final_cap(ARM64_HAS_LPA2); +} + int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt); bool try_emulate_mrs(struct pt_regs *regs, u32 isn); diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index ae35939f39..353fe08546 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -392,6 +392,21 @@ static inline bool esr_is_data_abort(unsigned long esr) return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR; } +static inline bool esr_fsc_is_translation_fault(unsigned long esr) +{ + return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT; +} + +static inline bool esr_fsc_is_permission_fault(unsigned long esr) +{ + return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM; +} + +static inline bool esr_fsc_is_access_flag_fault(unsigned long esr) +{ + return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_ACCESS; +} + const char *esr_get_class_string(unsigned long esr); #endif /* __ASSEMBLY */ diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h index cdf6a35e39..cda81d009c 100644 --- a/arch/arm64/include/asm/fpsimdmacros.h +++ b/arch/arm64/include/asm/fpsimdmacros.h @@ -242,14 +242,6 @@ | (\nx << 5) .endm -/* - * Zero the entire ZA array - * ZERO ZA - */ -.macro zero_za - .inst 0xc00800ff -.endm - .macro __for from:req, to:req .if (\from) == (\to) _for__body %\from diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h index 50ce8b697f..e93548914c 100644 --- a/arch/arm64/include/asm/irq.h +++ b/arch/arm64/include/asm/irq.h @@ -4,6 +4,8 @@ #ifndef __ASSEMBLER__ +#include <linux/cpumask.h> + #include <asm-generic/irq.h> void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu); diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h index 12d5f47f7d..7eefc525a9 100644 --- a/arch/arm64/include/asm/kasan.h +++ b/arch/arm64/include/asm/kasan.h @@ -15,29 +15,9 @@ #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) +asmlinkage void kasan_early_init(void); void kasan_init(void); - -/* - * KASAN_SHADOW_START: beginning of the kernel virtual addresses. - * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses, - * where N = (1 << KASAN_SHADOW_SCALE_SHIFT). - * - * KASAN_SHADOW_OFFSET: - * This value is used to map an address to the corresponding shadow - * address by the following formula: - * shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET - * - * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range - * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual - * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation: - * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - - * (1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT)) - */ -#define _KASAN_SHADOW_START(va) (KASAN_SHADOW_END - (1UL << ((va) - KASAN_SHADOW_SCALE_SHIFT))) -#define KASAN_SHADOW_START _KASAN_SHADOW_START(vabits_actual) - void kasan_copy_shadow(pgd_t *pgdir); -asmlinkage void kasan_early_init(void); #else static inline void kasan_init(void) { } diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h index 85d26143fa..83ddb14b95 100644 --- a/arch/arm64/include/asm/kernel-pgtable.h +++ b/arch/arm64/include/asm/kernel-pgtable.h @@ -37,27 +37,12 @@ /* - * If KASLR is enabled, then an offset K is added to the kernel address - * space. The bottom 21 bits of this offset are zero to guarantee 2MB - * alignment for PA and VA. - * - * For each pagetable level of the swapper, we know that the shift will - * be larger than 21 (for the 4KB granule case we use section maps thus - * the smallest shift is actually 30) thus there is the possibility that - * KASLR can increase the number of pagetable entries by 1, so we make - * room for this extra entry. - * - * Note KASLR cannot increase the number of required entries for a level - * by more than one because it increments both the virtual start and end - * addresses equally (the extra entry comes from the case where the end - * address is just pushed over a boundary and the start address isn't). + * A relocatable kernel may execute from an address that differs from the one at + * which it was linked. In the worst case, its runtime placement may intersect + * with two adjacent PGDIR entries, which means that an additional page table + * may be needed at each subordinate level. */ - -#ifdef CONFIG_RANDOMIZE_BASE -#define EARLY_KASLR (1) -#else -#define EARLY_KASLR (0) -#endif +#define EXTRA_PAGE __is_defined(CONFIG_RELOCATABLE) #define SPAN_NR_ENTRIES(vstart, vend, shift) \ ((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1) @@ -83,7 +68,7 @@ + EARLY_PGDS((vstart), (vend), add) /* each PGDIR needs a next level page table */ \ + EARLY_PUDS((vstart), (vend), add) /* each PUD needs a next level page table */ \ + EARLY_PMDS((vstart), (vend), add)) /* each PMD needs a next level page table */ -#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EARLY_KASLR)) +#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EXTRA_PAGE)) /* the initial ID map may need two extra pages if it needs to be extended */ #if VA_BITS < 48 diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index b85f46a73e..3c6f8ba1e4 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -108,6 +108,7 @@ #define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En) /* TCR_EL2 Registers bits */ +#define TCR_EL2_DS (1UL << 32) #define TCR_EL2_RES1 ((1U << 31) | (1 << 23)) #define TCR_EL2_TBI (1 << 20) #define TCR_EL2_PS_SHIFT 16 @@ -122,6 +123,7 @@ TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK | TCR_EL2_T0SZ_MASK) /* VTCR_EL2 Registers bits */ +#define VTCR_EL2_DS TCR_EL2_DS #define VTCR_EL2_RES1 (1U << 31) #define VTCR_EL2_HD (1 << 22) #define VTCR_EL2_HA (1 << 21) @@ -344,36 +346,47 @@ * Once we get to a point where the two describe the same thing, we'll * merge the definitions. One day. */ -#define __HFGRTR_EL2_RES0 (GENMASK(63, 56) | GENMASK(53, 51)) +#define __HFGRTR_EL2_RES0 HFGxTR_EL2_RES0 #define __HFGRTR_EL2_MASK GENMASK(49, 0) -#define __HFGRTR_EL2_nMASK (GENMASK(58, 57) | GENMASK(55, 54) | BIT(50)) +#define __HFGRTR_EL2_nMASK ~(__HFGRTR_EL2_RES0 | __HFGRTR_EL2_MASK) -#define __HFGWTR_EL2_RES0 (GENMASK(63, 56) | GENMASK(53, 51) | \ - BIT(46) | BIT(42) | BIT(40) | BIT(28) | \ - GENMASK(26, 25) | BIT(21) | BIT(18) | \ +/* + * The HFGWTR bits are a subset of HFGRTR bits. To ensure we don't miss any + * future additions, define __HFGWTR* macros relative to __HFGRTR* ones. + */ +#define __HFGRTR_ONLY_MASK (BIT(46) | BIT(42) | BIT(40) | BIT(28) | \ + GENMASK(26, 25) | BIT(21) | BIT(18) | \ GENMASK(15, 14) | GENMASK(10, 9) | BIT(2)) -#define __HFGWTR_EL2_MASK GENMASK(49, 0) -#define __HFGWTR_EL2_nMASK (GENMASK(58, 57) | GENMASK(55, 54) | BIT(50)) - -#define __HFGITR_EL2_RES0 GENMASK(63, 57) -#define __HFGITR_EL2_MASK GENMASK(54, 0) -#define __HFGITR_EL2_nMASK GENMASK(56, 55) - -#define __HDFGRTR_EL2_RES0 (BIT(49) | BIT(42) | GENMASK(39, 38) | \ - GENMASK(21, 20) | BIT(8)) -#define __HDFGRTR_EL2_MASK ~__HDFGRTR_EL2_nMASK -#define __HDFGRTR_EL2_nMASK GENMASK(62, 59) - -#define __HDFGWTR_EL2_RES0 (BIT(63) | GENMASK(59, 58) | BIT(51) | BIT(47) | \ - BIT(43) | GENMASK(40, 38) | BIT(34) | BIT(30) | \ - BIT(22) | BIT(9) | BIT(6)) -#define __HDFGWTR_EL2_MASK ~__HDFGWTR_EL2_nMASK -#define __HDFGWTR_EL2_nMASK GENMASK(62, 60) +#define __HFGWTR_EL2_RES0 (__HFGRTR_EL2_RES0 | __HFGRTR_ONLY_MASK) +#define __HFGWTR_EL2_MASK (__HFGRTR_EL2_MASK & ~__HFGRTR_ONLY_MASK) +#define __HFGWTR_EL2_nMASK ~(__HFGWTR_EL2_RES0 | __HFGWTR_EL2_MASK) + +#define __HFGITR_EL2_RES0 HFGITR_EL2_RES0 +#define __HFGITR_EL2_MASK (BIT(62) | BIT(60) | GENMASK(54, 0)) +#define __HFGITR_EL2_nMASK ~(__HFGITR_EL2_RES0 | __HFGITR_EL2_MASK) + +#define __HDFGRTR_EL2_RES0 HDFGRTR_EL2_RES0 +#define __HDFGRTR_EL2_MASK (BIT(63) | GENMASK(58, 50) | GENMASK(48, 43) | \ + GENMASK(41, 40) | GENMASK(37, 22) | \ + GENMASK(19, 9) | GENMASK(7, 0)) +#define __HDFGRTR_EL2_nMASK ~(__HDFGRTR_EL2_RES0 | __HDFGRTR_EL2_MASK) + +#define __HDFGWTR_EL2_RES0 HDFGWTR_EL2_RES0 +#define __HDFGWTR_EL2_MASK (GENMASK(57, 52) | GENMASK(50, 48) | \ + GENMASK(46, 44) | GENMASK(42, 41) | \ + GENMASK(37, 35) | GENMASK(33, 31) | \ + GENMASK(29, 23) | GENMASK(21, 10) | \ + GENMASK(8, 7) | GENMASK(5, 0)) +#define __HDFGWTR_EL2_nMASK ~(__HDFGWTR_EL2_RES0 | __HDFGWTR_EL2_MASK) + +#define __HAFGRTR_EL2_RES0 HAFGRTR_EL2_RES0 +#define __HAFGRTR_EL2_MASK (GENMASK(49, 17) | GENMASK(4, 0)) +#define __HAFGRTR_EL2_nMASK ~(__HAFGRTR_EL2_RES0 | __HAFGRTR_EL2_MASK) /* Similar definitions for HCRX_EL2 */ -#define __HCRX_EL2_RES0 (GENMASK(63, 16) | GENMASK(13, 12)) -#define __HCRX_EL2_MASK (0) -#define __HCRX_EL2_nMASK (GENMASK(15, 14) | GENMASK(4, 0)) +#define __HCRX_EL2_RES0 HCRX_EL2_RES0 +#define __HCRX_EL2_MASK (BIT(6)) +#define __HCRX_EL2_nMASK ~(__HCRX_EL2_RES0 | __HCRX_EL2_MASK) /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ #define HPFAR_MASK (~UL(0xf)) diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 78a550537b..b804fe8321 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -17,6 +17,7 @@ #include <asm/esr.h> #include <asm/kvm_arm.h> #include <asm/kvm_hyp.h> +#include <asm/kvm_nested.h> #include <asm/ptrace.h> #include <asm/cputype.h> #include <asm/virt.h> @@ -54,11 +55,6 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu); int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2); int kvm_inject_nested_irq(struct kvm_vcpu *vcpu); -static inline bool vcpu_has_feature(const struct kvm_vcpu *vcpu, int feature) -{ - return test_bit(feature, vcpu->kvm->arch.vcpu_features); -} - #if defined(__KVM_VHE_HYPERVISOR__) || defined(__KVM_NVHE_HYPERVISOR__) static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu) { @@ -248,7 +244,7 @@ static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt) static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu) { - return __is_hyp_ctxt(&vcpu->arch.ctxt); + return vcpu_has_nv(vcpu) && __is_hyp_ctxt(&vcpu->arch.ctxt); } /* @@ -404,14 +400,25 @@ static __always_inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu) return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC; } -static __always_inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu) +static inline +bool kvm_vcpu_trap_is_permission_fault(const struct kvm_vcpu *vcpu) { - return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE; + return esr_fsc_is_permission_fault(kvm_vcpu_get_esr(vcpu)); } -static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu) +static inline +bool kvm_vcpu_trap_is_translation_fault(const struct kvm_vcpu *vcpu) { - return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL; + return esr_fsc_is_translation_fault(kvm_vcpu_get_esr(vcpu)); +} + +static inline +u64 kvm_vcpu_trap_get_perm_fault_granule(const struct kvm_vcpu *vcpu) +{ + unsigned long esr = kvm_vcpu_get_esr(vcpu); + + BUG_ON(!esr_fsc_is_permission_fault(esr)); + return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(esr & ESR_ELx_FSC_LEVEL)); } static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu) @@ -454,12 +461,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu) * first), then a permission fault to allow the flags * to be set. */ - switch (kvm_vcpu_trap_get_fault_type(vcpu)) { - case ESR_ELx_FSC_PERM: - return true; - default: - return false; - } + return kvm_vcpu_trap_is_permission_fault(vcpu); } if (kvm_vcpu_trap_is_iabt(vcpu)) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 824f29f049..21c57b8125 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -27,6 +27,7 @@ #include <asm/fpsimd.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> +#include <asm/vncr_mapping.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED @@ -306,6 +307,7 @@ struct kvm_arch { * Atomic access to multiple idregs are guarded by kvm_arch.config_lock. */ #define IDREG_IDX(id) (((sys_reg_CRm(id) - 1) << 3) | sys_reg_Op2(id)) +#define IDX_IDREG(idx) sys_reg(3, 0, 0, ((idx) >> 3) + 1, (idx) & Op2_mask) #define IDREG(kvm, id) ((kvm)->arch.id_regs[IDREG_IDX(id)]) #define KVM_ARM_ID_REG_NUM (IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1) u64 id_regs[KVM_ARM_ID_REG_NUM]; @@ -324,33 +326,33 @@ struct kvm_vcpu_fault_info { u64 disr_el1; /* Deferred [SError] Status Register */ }; +/* + * VNCR() just places the VNCR_capable registers in the enum after + * __VNCR_START__, and the value (after correction) to be an 8-byte offset + * from the VNCR base. As we don't require the enum to be otherwise ordered, + * we need the terrible hack below to ensure that we correctly size the + * sys_regs array, no matter what. + * + * The __MAX__ macro has been lifted from Sean Eron Anderson's wonderful + * treasure trove of bit hacks: + * https://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax + */ +#define __MAX__(x,y) ((x) ^ (((x) ^ (y)) & -((x) < (y)))) +#define VNCR(r) \ + __before_##r, \ + r = __VNCR_START__ + ((VNCR_ ## r) / 8), \ + __after_##r = __MAX__(__before_##r - 1, r) + enum vcpu_sysreg { __INVALID_SYSREG__, /* 0 is reserved as an invalid value */ MPIDR_EL1, /* MultiProcessor Affinity Register */ CLIDR_EL1, /* Cache Level ID Register */ CSSELR_EL1, /* Cache Size Selection Register */ - SCTLR_EL1, /* System Control Register */ - ACTLR_EL1, /* Auxiliary Control Register */ - CPACR_EL1, /* Coprocessor Access Control */ - ZCR_EL1, /* SVE Control */ - TTBR0_EL1, /* Translation Table Base Register 0 */ - TTBR1_EL1, /* Translation Table Base Register 1 */ - TCR_EL1, /* Translation Control Register */ - TCR2_EL1, /* Extended Translation Control Register */ - ESR_EL1, /* Exception Syndrome Register */ - AFSR0_EL1, /* Auxiliary Fault Status Register 0 */ - AFSR1_EL1, /* Auxiliary Fault Status Register 1 */ - FAR_EL1, /* Fault Address Register */ - MAIR_EL1, /* Memory Attribute Indirection Register */ - VBAR_EL1, /* Vector Base Address Register */ - CONTEXTIDR_EL1, /* Context ID Register */ TPIDR_EL0, /* Thread ID, User R/W */ TPIDRRO_EL0, /* Thread ID, User R/O */ TPIDR_EL1, /* Thread ID, Privileged */ - AMAIR_EL1, /* Aux Memory Attribute Indirection Register */ CNTKCTL_EL1, /* Timer Control Register (EL1) */ PAR_EL1, /* Physical Address Register */ - MDSCR_EL1, /* Monitor Debug System Control Register */ MDCCINT_EL1, /* Monitor Debug Comms Channel Interrupt Enable Reg */ OSLSR_EL1, /* OS Lock Status Register */ DISR_EL1, /* Deferred Interrupt Status Register */ @@ -381,26 +383,11 @@ enum vcpu_sysreg { APGAKEYLO_EL1, APGAKEYHI_EL1, - ELR_EL1, - SP_EL1, - SPSR_EL1, - - CNTVOFF_EL2, - CNTV_CVAL_EL0, - CNTV_CTL_EL0, - CNTP_CVAL_EL0, - CNTP_CTL_EL0, - /* Memory Tagging Extension registers */ RGSR_EL1, /* Random Allocation Tag Seed Register */ GCR_EL1, /* Tag Control Register */ - TFSR_EL1, /* Tag Fault Status Register (EL1) */ TFSRE0_EL1, /* Tag Fault Status Register (EL0) */ - /* Permission Indirection Extension registers */ - PIR_EL1, /* Permission Indirection Register 1 (EL1) */ - PIRE0_EL1, /* Permission Indirection Register 0 (EL1) */ - /* 32bit specific registers. */ DACR32_EL2, /* Domain Access Control Register */ IFSR32_EL2, /* Instruction Fault Status Register */ @@ -408,21 +395,14 @@ enum vcpu_sysreg { DBGVCR32_EL2, /* Debug Vector Catch Register */ /* EL2 registers */ - VPIDR_EL2, /* Virtualization Processor ID Register */ - VMPIDR_EL2, /* Virtualization Multiprocessor ID Register */ SCTLR_EL2, /* System Control Register (EL2) */ ACTLR_EL2, /* Auxiliary Control Register (EL2) */ - HCR_EL2, /* Hypervisor Configuration Register */ MDCR_EL2, /* Monitor Debug Configuration Register (EL2) */ CPTR_EL2, /* Architectural Feature Trap Register (EL2) */ - HSTR_EL2, /* Hypervisor System Trap Register */ HACR_EL2, /* Hypervisor Auxiliary Control Register */ - HCRX_EL2, /* Extended Hypervisor Configuration Register */ TTBR0_EL2, /* Translation Table Base Register 0 (EL2) */ TTBR1_EL2, /* Translation Table Base Register 1 (EL2) */ TCR_EL2, /* Translation Control Register (EL2) */ - VTTBR_EL2, /* Virtualization Translation Table Base Register */ - VTCR_EL2, /* Virtualization Translation Control Register */ SPSR_EL2, /* EL2 saved program status register */ ELR_EL2, /* EL2 exception link register */ AFSR0_EL2, /* Auxiliary Fault Status Register 0 (EL2) */ @@ -435,19 +415,62 @@ enum vcpu_sysreg { VBAR_EL2, /* Vector Base Address Register (EL2) */ RVBAR_EL2, /* Reset Vector Base Address Register */ CONTEXTIDR_EL2, /* Context ID Register (EL2) */ - TPIDR_EL2, /* EL2 Software Thread ID Register */ CNTHCTL_EL2, /* Counter-timer Hypervisor Control register */ SP_EL2, /* EL2 Stack Pointer */ - HFGRTR_EL2, - HFGWTR_EL2, - HFGITR_EL2, - HDFGRTR_EL2, - HDFGWTR_EL2, CNTHP_CTL_EL2, CNTHP_CVAL_EL2, CNTHV_CTL_EL2, CNTHV_CVAL_EL2, + __VNCR_START__, /* Any VNCR-capable reg goes after this point */ + + VNCR(SCTLR_EL1),/* System Control Register */ + VNCR(ACTLR_EL1),/* Auxiliary Control Register */ + VNCR(CPACR_EL1),/* Coprocessor Access Control */ + VNCR(ZCR_EL1), /* SVE Control */ + VNCR(TTBR0_EL1),/* Translation Table Base Register 0 */ + VNCR(TTBR1_EL1),/* Translation Table Base Register 1 */ + VNCR(TCR_EL1), /* Translation Control Register */ + VNCR(TCR2_EL1), /* Extended Translation Control Register */ + VNCR(ESR_EL1), /* Exception Syndrome Register */ + VNCR(AFSR0_EL1),/* Auxiliary Fault Status Register 0 */ + VNCR(AFSR1_EL1),/* Auxiliary Fault Status Register 1 */ + VNCR(FAR_EL1), /* Fault Address Register */ + VNCR(MAIR_EL1), /* Memory Attribute Indirection Register */ + VNCR(VBAR_EL1), /* Vector Base Address Register */ + VNCR(CONTEXTIDR_EL1), /* Context ID Register */ + VNCR(AMAIR_EL1),/* Aux Memory Attribute Indirection Register */ + VNCR(MDSCR_EL1),/* Monitor Debug System Control Register */ + VNCR(ELR_EL1), + VNCR(SP_EL1), + VNCR(SPSR_EL1), + VNCR(TFSR_EL1), /* Tag Fault Status Register (EL1) */ + VNCR(VPIDR_EL2),/* Virtualization Processor ID Register */ + VNCR(VMPIDR_EL2),/* Virtualization Multiprocessor ID Register */ + VNCR(HCR_EL2), /* Hypervisor Configuration Register */ + VNCR(HSTR_EL2), /* Hypervisor System Trap Register */ + VNCR(VTTBR_EL2),/* Virtualization Translation Table Base Register */ + VNCR(VTCR_EL2), /* Virtualization Translation Control Register */ + VNCR(TPIDR_EL2),/* EL2 Software Thread ID Register */ + VNCR(HCRX_EL2), /* Extended Hypervisor Configuration Register */ + + /* Permission Indirection Extension registers */ + VNCR(PIR_EL1), /* Permission Indirection Register 1 (EL1) */ + VNCR(PIRE0_EL1), /* Permission Indirection Register 0 (EL1) */ + + VNCR(HFGRTR_EL2), + VNCR(HFGWTR_EL2), + VNCR(HFGITR_EL2), + VNCR(HDFGRTR_EL2), + VNCR(HDFGWTR_EL2), + VNCR(HAFGRTR_EL2), + + VNCR(CNTVOFF_EL2), + VNCR(CNTV_CVAL_EL0), + VNCR(CNTV_CTL_EL0), + VNCR(CNTP_CVAL_EL0), + VNCR(CNTP_CTL_EL0), + NR_SYS_REGS /* Nothing after this line! */ }; @@ -464,6 +487,9 @@ struct kvm_cpu_context { u64 sys_regs[NR_SYS_REGS]; struct kvm_vcpu *__hyp_running_vcpu; + + /* This pointer has to be 4kB aligned. */ + u64 *vncr_array; }; struct kvm_host_data { @@ -826,8 +852,19 @@ struct kvm_vcpu_arch { * accessed by a running VCPU. For example, for userspace access or * for system registers that are never context switched, but only * emulated. + * + * Don't bother with VNCR-based accesses in the nVHE code, it has no + * business dealing with NV. */ -#define __ctxt_sys_reg(c,r) (&(c)->sys_regs[(r)]) +static inline u64 *__ctxt_sys_reg(const struct kvm_cpu_context *ctxt, int r) +{ +#if !defined (__KVM_NVHE_HYPERVISOR__) + if (unlikely(cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) && + r >= __VNCR_START__ && ctxt->vncr_array)) + return &ctxt->vncr_array[r - __VNCR_START__]; +#endif + return (u64 *)&ctxt->sys_regs[r]; +} #define ctxt_sys_reg(c,r) (*__ctxt_sys_reg(c,r)) @@ -871,6 +908,7 @@ static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val) case AMAIR_EL1: *val = read_sysreg_s(SYS_AMAIR_EL12); break; case CNTKCTL_EL1: *val = read_sysreg_s(SYS_CNTKCTL_EL12); break; case ELR_EL1: *val = read_sysreg_s(SYS_ELR_EL12); break; + case SPSR_EL1: *val = read_sysreg_s(SYS_SPSR_EL12); break; case PAR_EL1: *val = read_sysreg_par(); break; case DACR32_EL2: *val = read_sysreg_s(SYS_DACR32_EL2); break; case IFSR32_EL2: *val = read_sysreg_s(SYS_IFSR32_EL2); break; @@ -915,6 +953,7 @@ static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg) case AMAIR_EL1: write_sysreg_s(val, SYS_AMAIR_EL12); break; case CNTKCTL_EL1: write_sysreg_s(val, SYS_CNTKCTL_EL12); break; case ELR_EL1: write_sysreg_s(val, SYS_ELR_EL12); break; + case SPSR_EL1: write_sysreg_s(val, SYS_SPSR_EL12); break; case PAR_EL1: write_sysreg_s(val, SYS_PAR_EL1); break; case DACR32_EL2: write_sysreg_s(val, SYS_DACR32_EL2); break; case IFSR32_EL2: write_sysreg_s(val, SYS_IFSR32_EL2); break; @@ -954,8 +993,6 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events); -#define KVM_ARCH_WANT_MMU_NOTIFIER - void kvm_arm_halt_guest(struct kvm *kvm); void kvm_arm_resume_guest(struct kvm *kvm); @@ -1177,6 +1214,13 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu); #define kvm_vm_has_ran_once(kvm) \ (test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &(kvm)->arch.flags)) +static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature) +{ + return test_bit(feature, ka->vcpu_features); +} + +#define vcpu_has_feature(v, f) __vcpu_has_feature(&(v)->kvm->arch, (f)) + int kvm_trng_call(struct kvm_vcpu *vcpu); #ifdef CONFIG_KVM extern phys_addr_t hyp_mem_base; diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index 49e0d4b36b..e3e793d0ec 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -244,13 +244,6 @@ static inline size_t __invalidate_icache_max_range(void) static inline void __invalidate_icache_guest_page(void *va, size_t size) { /* - * VPIPT I-cache maintenance must be done from EL2. See comment in the - * nVHE flavor of __kvm_tlb_flush_vmid_ipa(). - */ - if (icache_is_vpipt() && read_sysreg(CurrentEL) != CurrentEL_EL2) - return; - - /* * Blow the whole I-cache if it is aliasing (i.e. VIPT) or the * invalidation range exceeds our arbitrary limit on invadations by * cache line. diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h index 6cec8e9c6c..4882905357 100644 --- a/arch/arm64/include/asm/kvm_nested.h +++ b/arch/arm64/include/asm/kvm_nested.h @@ -2,8 +2,9 @@ #ifndef __ARM64_KVM_NESTED_H #define __ARM64_KVM_NESTED_H -#include <asm/kvm_emulate.h> +#include <linux/bitfield.h> #include <linux/kvm_host.h> +#include <asm/kvm_emulate.h> static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu) { @@ -12,12 +13,55 @@ static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu) vcpu_has_feature(vcpu, KVM_ARM_VCPU_HAS_EL2)); } -extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu); +/* Translation helpers from non-VHE EL2 to EL1 */ +static inline u64 tcr_el2_ps_to_tcr_el1_ips(u64 tcr_el2) +{ + return (u64)FIELD_GET(TCR_EL2_PS_MASK, tcr_el2) << TCR_IPS_SHIFT; +} + +static inline u64 translate_tcr_el2_to_tcr_el1(u64 tcr) +{ + return TCR_EPD1_MASK | /* disable TTBR1_EL1 */ + ((tcr & TCR_EL2_TBI) ? TCR_TBI0 : 0) | + tcr_el2_ps_to_tcr_el1_ips(tcr) | + (tcr & TCR_EL2_TG0_MASK) | + (tcr & TCR_EL2_ORGN0_MASK) | + (tcr & TCR_EL2_IRGN0_MASK) | + (tcr & TCR_EL2_T0SZ_MASK); +} + +static inline u64 translate_cptr_el2_to_cpacr_el1(u64 cptr_el2) +{ + u64 cpacr_el1 = 0; + + if (cptr_el2 & CPTR_EL2_TTA) + cpacr_el1 |= CPACR_ELx_TTA; + if (!(cptr_el2 & CPTR_EL2_TFP)) + cpacr_el1 |= CPACR_ELx_FPEN; + if (!(cptr_el2 & CPTR_EL2_TZ)) + cpacr_el1 |= CPACR_ELx_ZEN; -struct sys_reg_params; -struct sys_reg_desc; + return cpacr_el1; +} + +static inline u64 translate_sctlr_el2_to_sctlr_el1(u64 val) +{ + /* Only preserve the minimal set of bits we support */ + val &= (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | SCTLR_ELx_SA | + SCTLR_ELx_I | SCTLR_ELx_IESB | SCTLR_ELx_WXN | SCTLR_ELx_EE); + val |= SCTLR_EL1_RES1; + + return val; +} + +static inline u64 translate_ttbr0_el2_to_ttbr0_el1(u64 ttbr0) +{ + /* Clear the ASID field */ + return ttbr0 & ~GENMASK_ULL(63, 48); +} + +extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu); -void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p, - const struct sys_reg_desc *r); +int kvm_init_nv_sysregs(struct kvm *kvm); #endif /* __ARM64_KVM_NESTED_H */ diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h index d3e354bb83..cfdf40f734 100644 --- a/arch/arm64/include/asm/kvm_pgtable.h +++ b/arch/arm64/include/asm/kvm_pgtable.h @@ -11,7 +11,8 @@ #include <linux/kvm_host.h> #include <linux/types.h> -#define KVM_PGTABLE_MAX_LEVELS 4U +#define KVM_PGTABLE_FIRST_LEVEL -1 +#define KVM_PGTABLE_LAST_LEVEL 3 /* * The largest supported block sizes for KVM (no 52-bit PA support): @@ -20,17 +21,29 @@ * - 64K (level 2): 512MB */ #ifdef CONFIG_ARM64_4K_PAGES -#define KVM_PGTABLE_MIN_BLOCK_LEVEL 1U +#define KVM_PGTABLE_MIN_BLOCK_LEVEL 1 #else -#define KVM_PGTABLE_MIN_BLOCK_LEVEL 2U +#define KVM_PGTABLE_MIN_BLOCK_LEVEL 2 #endif +#define kvm_lpa2_is_enabled() system_supports_lpa2() + +static inline u64 kvm_get_parange_max(void) +{ + if (kvm_lpa2_is_enabled() || + (IS_ENABLED(CONFIG_ARM64_PA_BITS_52) && PAGE_SHIFT == 16)) + return ID_AA64MMFR0_EL1_PARANGE_52; + else + return ID_AA64MMFR0_EL1_PARANGE_48; +} + static inline u64 kvm_get_parange(u64 mmfr0) { + u64 parange_max = kvm_get_parange_max(); u64 parange = cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT); - if (parange > ID_AA64MMFR0_EL1_PARANGE_MAX) - parange = ID_AA64MMFR0_EL1_PARANGE_MAX; + if (parange > parange_max) + parange = parange_max; return parange; } @@ -41,6 +54,8 @@ typedef u64 kvm_pte_t; #define KVM_PTE_ADDR_MASK GENMASK(47, PAGE_SHIFT) #define KVM_PTE_ADDR_51_48 GENMASK(15, 12) +#define KVM_PTE_ADDR_MASK_LPA2 GENMASK(49, PAGE_SHIFT) +#define KVM_PTE_ADDR_51_50_LPA2 GENMASK(9, 8) #define KVM_PHYS_INVALID (-1ULL) @@ -51,21 +66,34 @@ static inline bool kvm_pte_valid(kvm_pte_t pte) static inline u64 kvm_pte_to_phys(kvm_pte_t pte) { - u64 pa = pte & KVM_PTE_ADDR_MASK; - - if (PAGE_SHIFT == 16) - pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48; + u64 pa; + + if (kvm_lpa2_is_enabled()) { + pa = pte & KVM_PTE_ADDR_MASK_LPA2; + pa |= FIELD_GET(KVM_PTE_ADDR_51_50_LPA2, pte) << 50; + } else { + pa = pte & KVM_PTE_ADDR_MASK; + if (PAGE_SHIFT == 16) + pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48; + } return pa; } static inline kvm_pte_t kvm_phys_to_pte(u64 pa) { - kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK; - - if (PAGE_SHIFT == 16) { - pa &= GENMASK(51, 48); - pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48); + kvm_pte_t pte; + + if (kvm_lpa2_is_enabled()) { + pte = pa & KVM_PTE_ADDR_MASK_LPA2; + pa &= GENMASK(51, 50); + pte |= FIELD_PREP(KVM_PTE_ADDR_51_50_LPA2, pa >> 50); + } else { + pte = pa & KVM_PTE_ADDR_MASK; + if (PAGE_SHIFT == 16) { + pa &= GENMASK(51, 48); + pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48); + } } return pte; @@ -76,28 +104,28 @@ static inline kvm_pfn_t kvm_pte_to_pfn(kvm_pte_t pte) return __phys_to_pfn(kvm_pte_to_phys(pte)); } -static inline u64 kvm_granule_shift(u32 level) +static inline u64 kvm_granule_shift(s8 level) { - /* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */ + /* Assumes KVM_PGTABLE_LAST_LEVEL is 3 */ return ARM64_HW_PGTABLE_LEVEL_SHIFT(level); } -static inline u64 kvm_granule_size(u32 level) +static inline u64 kvm_granule_size(s8 level) { return BIT(kvm_granule_shift(level)); } -static inline bool kvm_level_supports_block_mapping(u32 level) +static inline bool kvm_level_supports_block_mapping(s8 level) { return level >= KVM_PGTABLE_MIN_BLOCK_LEVEL; } static inline u32 kvm_supported_block_sizes(void) { - u32 level = KVM_PGTABLE_MIN_BLOCK_LEVEL; + s8 level = KVM_PGTABLE_MIN_BLOCK_LEVEL; u32 r = 0; - for (; level < KVM_PGTABLE_MAX_LEVELS; level++) + for (; level <= KVM_PGTABLE_LAST_LEVEL; level++) r |= BIT(kvm_granule_shift(level)); return r; @@ -142,7 +170,7 @@ struct kvm_pgtable_mm_ops { void* (*zalloc_page)(void *arg); void* (*zalloc_pages_exact)(size_t size); void (*free_pages_exact)(void *addr, size_t size); - void (*free_unlinked_table)(void *addr, u32 level); + void (*free_unlinked_table)(void *addr, s8 level); void (*get_page)(void *addr); void (*put_page)(void *addr); int (*page_count)(void *addr); @@ -238,7 +266,7 @@ struct kvm_pgtable_visit_ctx { u64 start; u64 addr; u64 end; - u32 level; + s8 level; enum kvm_pgtable_walk_flags flags; }; @@ -341,7 +369,7 @@ static inline bool kvm_pgtable_walk_lock_held(void) */ struct kvm_pgtable { u32 ia_bits; - u32 start_level; + s8 start_level; kvm_pteref_t pgd; struct kvm_pgtable_mm_ops *mm_ops; @@ -475,7 +503,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt); * The page-table is assumed to be unreachable by any hardware walkers prior to * freeing and therefore no TLB invalidation is performed. */ -void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level); +void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level); /** * kvm_pgtable_stage2_create_unlinked() - Create an unlinked stage-2 paging structure. @@ -499,7 +527,7 @@ void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *p * an ERR_PTR(error) on failure. */ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt, - u64 phys, u32 level, + u64 phys, s8 level, enum kvm_pgtable_prot prot, void *mc, bool force_pte); @@ -725,7 +753,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size, * Return: 0 on success, negative error code on failure. */ int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr, - kvm_pte_t *ptep, u32 *level); + kvm_pte_t *ptep, s8 *level); /** * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a diff --git a/arch/arm64/include/asm/kvm_pkvm.h b/arch/arm64/include/asm/kvm_pkvm.h index e46250a020..ad9cfb5c1f 100644 --- a/arch/arm64/include/asm/kvm_pkvm.h +++ b/arch/arm64/include/asm/kvm_pkvm.h @@ -56,10 +56,11 @@ static inline unsigned long hyp_vm_table_pages(void) static inline unsigned long __hyp_pgtable_max_pages(unsigned long nr_pages) { - unsigned long total = 0, i; + unsigned long total = 0; + int i; /* Provision the worst case scenario */ - for (i = 0; i < KVM_PGTABLE_MAX_LEVELS; i++) { + for (i = KVM_PGTABLE_FIRST_LEVEL; i <= KVM_PGTABLE_LAST_LEVEL; i++) { nr_pages = DIV_ROUND_UP(nr_pages, PTRS_PER_PTE); total += nr_pages; } diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index fde4186cc3..d82305ab42 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -65,15 +65,41 @@ #define KERNEL_END _end /* - * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual - * address space for the shadow region respectively. They can bloat the stack - * significantly, so double the (minimum) stack size when they are in use. + * Generic and Software Tag-Based KASAN modes require 1/8th and 1/16th of the + * kernel virtual address space for storing the shadow memory respectively. + * + * The mapping between a virtual memory address and its corresponding shadow + * memory address is defined based on the formula: + * + * shadow_addr = (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET + * + * where KASAN_SHADOW_SCALE_SHIFT is the order of the number of bits that map + * to a single shadow byte and KASAN_SHADOW_OFFSET is a constant that offsets + * the mapping. Note that KASAN_SHADOW_OFFSET does not point to the start of + * the shadow memory region. + * + * Based on this mapping, we define two constants: + * + * KASAN_SHADOW_START: the start of the shadow memory region; + * KASAN_SHADOW_END: the end of the shadow memory region. + * + * KASAN_SHADOW_END is defined first as the shadow address that corresponds to + * the upper bound of possible virtual kernel memory addresses UL(1) << 64 + * according to the mapping formula. + * + * KASAN_SHADOW_START is defined second based on KASAN_SHADOW_END. The shadow + * memory start must map to the lowest possible kernel virtual memory address + * and thus it depends on the actual bitness of the address space. + * + * As KASAN inserts redzones between stack variables, this increases the stack + * memory usage significantly. Thus, we double the (minimum) stack size. */ #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) #define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL) -#define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ - + KASAN_SHADOW_OFFSET) -#define PAGE_END (KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT))) +#define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) + KASAN_SHADOW_OFFSET) +#define _KASAN_SHADOW_START(va) (KASAN_SHADOW_END - (UL(1) << ((va) - KASAN_SHADOW_SCALE_SHIFT))) +#define KASAN_SHADOW_START _KASAN_SHADOW_START(vabits_actual) +#define PAGE_END KASAN_SHADOW_START #define KASAN_THREAD_SHIFT 1 #else #define KASAN_THREAD_SHIFT 0 @@ -182,6 +208,7 @@ #include <linux/types.h> #include <asm/boot.h> #include <asm/bug.h> +#include <asm/sections.h> #if VA_BITS > 48 extern u64 vabits_actual; @@ -193,15 +220,12 @@ extern s64 memstart_addr; /* PHYS_OFFSET - the physical address of the start of memory. */ #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; }) -/* the virtual base of the kernel image */ -extern u64 kimage_vaddr; - /* the offset between the kernel virtual and physical mappings */ extern u64 kimage_voffset; static inline unsigned long kaslr_offset(void) { - return kimage_vaddr - KIMAGE_VADDR; + return (u64)&_text - KIMAGE_VADDR; } #ifdef CONFIG_RANDOMIZE_BASE @@ -407,6 +431,5 @@ void dump_mem_limit(void); #define INIT_MEMBLOCK_MEMORY_REGIONS (INIT_MEMBLOCK_REGIONS * 8) #endif -#include <asm-generic/memory_model.h> #endif /* __ASM_MEMORY_H */ diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index e9624f6326..483dbfa39c 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -71,6 +71,8 @@ extern bool arm64_use_ng_mappings; #define PTE_MAYBE_NG (arm64_use_ng_mappings ? PTE_NG : 0) #define PMD_MAYBE_NG (arm64_use_ng_mappings ? PMD_SECT_NG : 0) +#define lpa2_is_enabled() false + /* * If we have userspace only BTI we don't want to mark kernel pages * guarded even if the system does support BTI. diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index e5bc54522e..5b0a04810b 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -167,6 +167,9 @@ struct thread_struct { unsigned long fault_address; /* fault info */ unsigned long fault_code; /* ESR_EL1 value */ struct debug_info debug; /* debugging */ + + struct user_fpsimd_state kernel_fpsimd_state; + unsigned int kernel_fpsimd_cpu; #ifdef CONFIG_ARM64_PTR_AUTH struct ptrauth_keys_user keys_user; #ifdef CONFIG_ARM64_PTR_AUTH_KERNEL diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h index 6a75d7ecdc..8e86c9e70e 100644 --- a/arch/arm64/include/asm/simd.h +++ b/arch/arm64/include/asm/simd.h @@ -12,8 +12,6 @@ #include <linux/preempt.h> #include <linux/types.h> -DECLARE_PER_CPU(bool, fpsimd_context_busy); - #ifdef CONFIG_KERNEL_MODE_NEON /* @@ -28,17 +26,10 @@ static __must_check inline bool may_use_simd(void) /* * We must make sure that the SVE has been initialized properly * before using the SIMD in kernel. - * fpsimd_context_busy is only set while preemption is disabled, - * and is clear whenever preemption is enabled. Since - * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy - * cannot change under our feet -- if it's set we cannot be - * migrated, and if it's clear we cannot be migrated to a CPU - * where it is set. */ return !WARN_ON(!system_capabilities_finalized()) && system_supports_fpsimd() && - !in_hardirq() && !irqs_disabled() && !in_nmi() && - !this_cpu_read(fpsimd_context_busy); + !in_hardirq() && !irqs_disabled() && !in_nmi(); } #else /* ! CONFIG_KERNEL_MODE_NEON */ diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h index 5f54376210..8a8acc2203 100644 --- a/arch/arm64/include/asm/sparsemem.h +++ b/arch/arm64/include/asm/sparsemem.h @@ -10,7 +10,7 @@ /* * Section size must be at least 512MB for 64K base * page size config. Otherwise it will be less than - * MAX_ORDER and the build process will fail. + * MAX_PAGE_ORDER and the build process will fail. */ #ifdef CONFIG_ARM64_64K_PAGES #define SECTION_SIZE_BITS 29 diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h index 06c357d83b..0c4d9045c3 100644 --- a/arch/arm64/include/asm/spectre.h +++ b/arch/arm64/include/asm/spectre.h @@ -13,8 +13,8 @@ #define __BP_HARDEN_HYP_VECS_SZ ((BP_HARDEN_EL2_SLOTS - 1) * SZ_2K) #ifndef __ASSEMBLY__ - -#include <linux/percpu.h> +#include <linux/smp.h> +#include <asm/percpu.h> #include <asm/cpufeature.h> #include <asm/virt.h> diff --git a/arch/arm64/include/asm/stacktrace/common.h b/arch/arm64/include/asm/stacktrace/common.h index 508f734de4..f63dc654e5 100644 --- a/arch/arm64/include/asm/stacktrace/common.h +++ b/arch/arm64/include/asm/stacktrace/common.h @@ -9,7 +9,6 @@ #ifndef __ASM_STACKTRACE_COMMON_H #define __ASM_STACKTRACE_COMMON_H -#include <linux/kprobes.h> #include <linux/types.h> struct stack_info { @@ -23,12 +22,6 @@ struct stack_info { * @fp: The fp value in the frame record (or the real fp) * @pc: The lr value in the frame record (or the real lr) * - * @kr_cur: When KRETPROBES is selected, holds the kretprobe instance - * associated with the most recently encountered replacement lr - * value. - * - * @task: The task being unwound. - * * @stack: The stack currently being unwound. * @stacks: An array of stacks which can be unwound. * @nr_stacks: The number of stacks in @stacks. @@ -36,10 +29,6 @@ struct stack_info { struct unwind_state { unsigned long fp; unsigned long pc; -#ifdef CONFIG_KRETPROBES - struct llist_node *kr_cur; -#endif - struct task_struct *task; struct stack_info stack; struct stack_info *stacks; @@ -66,14 +55,8 @@ static inline bool stackinfo_on_stack(const struct stack_info *info, return true; } -static inline void unwind_init_common(struct unwind_state *state, - struct task_struct *task) +static inline void unwind_init_common(struct unwind_state *state) { - state->task = task; -#ifdef CONFIG_KRETPROBES - state->kr_cur = NULL; -#endif - state->stack = stackinfo_get_unknown(); } diff --git a/arch/arm64/include/asm/stacktrace/nvhe.h b/arch/arm64/include/asm/stacktrace/nvhe.h index 25ab83a315..44759281d0 100644 --- a/arch/arm64/include/asm/stacktrace/nvhe.h +++ b/arch/arm64/include/asm/stacktrace/nvhe.h @@ -31,7 +31,7 @@ static inline void kvm_nvhe_unwind_init(struct unwind_state *state, unsigned long fp, unsigned long pc) { - unwind_init_common(state, NULL); + unwind_init_common(state); state->fp = fp; state->pc = pc; diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 5e65f51c10..c3b19b376c 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -645,6 +645,7 @@ #define OP_AT_S1E0W sys_insn(AT_Op0, 0, AT_CRn, 8, 3) #define OP_AT_S1E1RP sys_insn(AT_Op0, 0, AT_CRn, 9, 0) #define OP_AT_S1E1WP sys_insn(AT_Op0, 0, AT_CRn, 9, 1) +#define OP_AT_S1E1A sys_insn(AT_Op0, 0, AT_CRn, 9, 2) #define OP_AT_S1E2R sys_insn(AT_Op0, 4, AT_CRn, 8, 0) #define OP_AT_S1E2W sys_insn(AT_Op0, 4, AT_CRn, 8, 1) #define OP_AT_S12E1R sys_insn(AT_Op0, 4, AT_CRn, 8, 4) @@ -781,10 +782,16 @@ #define OP_TLBI_VMALLS12E1NXS sys_insn(1, 4, 9, 7, 6) /* Misc instructions */ +#define OP_GCSPUSHX sys_insn(1, 0, 7, 7, 4) +#define OP_GCSPOPCX sys_insn(1, 0, 7, 7, 5) +#define OP_GCSPOPX sys_insn(1, 0, 7, 7, 6) +#define OP_GCSPUSHM sys_insn(1, 3, 7, 7, 0) + #define OP_BRB_IALL sys_insn(1, 1, 7, 2, 4) #define OP_BRB_INJ sys_insn(1, 1, 7, 2, 5) #define OP_CFP_RCTX sys_insn(1, 3, 7, 3, 4) #define OP_DVP_RCTX sys_insn(1, 3, 7, 3, 5) +#define OP_COSP_RCTX sys_insn(1, 3, 7, 3, 6) #define OP_CPP_RCTX sys_insn(1, 3, 7, 3, 7) /* Common SCTLR_ELx flags. */ @@ -871,10 +878,12 @@ /* id_aa64mmfr0 */ #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_EL1_TGRAN4_LPA2 ID_AA64MMFR0_EL1_TGRAN4_52_BIT #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX 0x7 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN 0x0 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX 0x7 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN 0x1 +#define ID_AA64MMFR0_EL1_TGRAN16_LPA2 ID_AA64MMFR0_EL1_TGRAN16_52_BIT #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX 0xf #define ARM64_MIN_PARANGE_BITS 32 @@ -882,6 +891,7 @@ #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT 0x0 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE 0x1 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN 0x2 +#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2 0x3 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX 0x7 #ifdef CONFIG_ARM64_PA_BITS_52 @@ -892,11 +902,13 @@ #if defined(CONFIG_ARM64_4K_PAGES) #define ID_AA64MMFR0_EL1_TGRAN_SHIFT ID_AA64MMFR0_EL1_TGRAN4_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_LPA2 ID_AA64MMFR0_EL1_TGRAN4_52_BIT #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT #elif defined(CONFIG_ARM64_16K_PAGES) #define ID_AA64MMFR0_EL1_TGRAN_SHIFT ID_AA64MMFR0_EL1_TGRAN16_SHIFT +#define ID_AA64MMFR0_EL1_TGRAN_LPA2 ID_AA64MMFR0_EL1_TGRAN16_52_BIT #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT @@ -1039,6 +1051,19 @@ #define PIRx_ELx_PERM(idx, perm) ((perm) << ((idx) * 4)) +/* + * Permission Overlay Extension (POE) permission encodings. + */ +#define POE_NONE UL(0x0) +#define POE_R UL(0x1) +#define POE_X UL(0x2) +#define POE_RX UL(0x3) +#define POE_W UL(0x4) +#define POE_RW UL(0x5) +#define POE_XW UL(0x6) +#define POE_RXW UL(0x7) +#define POE_MASK UL(0xf) + #define ARM64_FEATURE_FIELD_BITS 4 /* Defined for compatibility only, do not add new users. */ diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 553d1bc559..e72a3bf9e5 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -80,6 +80,7 @@ void arch_setup_new_exec(void); #define TIF_TAGGED_ADDR 26 /* Allow tagged user addresses */ #define TIF_SME 27 /* SME in use */ #define TIF_SME_VL_INHERIT 28 /* Inherit SME vl_onexec across exec */ +#define TIF_KERNEL_FPSTATE 29 /* Task is in a kernel mode FPSIMD section */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index 846c563689..0150deb332 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -22,15 +22,15 @@ static void tlb_flush(struct mmu_gather *tlb); #include <asm-generic/tlb.h> /* - * get the tlbi levels in arm64. Default value is 0 if more than one - * of cleared_* is set or neither is set. - * Arm64 doesn't support p4ds now. + * get the tlbi levels in arm64. Default value is TLBI_TTL_UNKNOWN if more than + * one of cleared_* is set or neither is set - this elides the level hinting to + * the hardware. */ static inline int tlb_get_level(struct mmu_gather *tlb) { /* The TTL field is only valid for the leaf entry. */ if (tlb->freed_tables) - return 0; + return TLBI_TTL_UNKNOWN; if (tlb->cleared_ptes && !(tlb->cleared_pmds || tlb->cleared_puds || @@ -47,7 +47,12 @@ static inline int tlb_get_level(struct mmu_gather *tlb) tlb->cleared_p4ds)) return 1; - return 0; + if (tlb->cleared_p4ds && !(tlb->cleared_ptes || + tlb->cleared_pmds || + tlb->cleared_puds)) + return 0; + + return TLBI_TTL_UNKNOWN; } static inline void tlb_flush(struct mmu_gather *tlb) diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index bb2c2833a9..bfeb54f3a9 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -94,19 +94,22 @@ static inline unsigned long get_trans_granule(void) * When ARMv8.4-TTL exists, TLBI operations take an additional hint for * the level at which the invalidation must take place. If the level is * wrong, no invalidation may take place. In the case where the level - * cannot be easily determined, a 0 value for the level parameter will - * perform a non-hinted invalidation. + * cannot be easily determined, the value TLBI_TTL_UNKNOWN will perform + * a non-hinted invalidation. Any provided level outside the hint range + * will also cause fall-back to non-hinted invalidation. * * For Stage-2 invalidation, use the level values provided to that effect * in asm/stage2_pgtable.h. */ #define TLBI_TTL_MASK GENMASK_ULL(47, 44) +#define TLBI_TTL_UNKNOWN INT_MAX + #define __tlbi_level(op, addr, level) do { \ u64 arg = addr; \ \ if (alternative_has_cap_unlikely(ARM64_HAS_ARMv8_4_TTL) && \ - level) { \ + level >= 0 && level <= 3) { \ u64 ttl = level & 3; \ ttl |= get_trans_granule() << 2; \ arg &= ~TLBI_TTL_MASK; \ @@ -122,28 +125,34 @@ static inline unsigned long get_trans_granule(void) } while (0) /* - * This macro creates a properly formatted VA operand for the TLB RANGE. - * The value bit assignments are: + * This macro creates a properly formatted VA operand for the TLB RANGE. The + * value bit assignments are: * * +----------+------+-------+-------+-------+----------------------+ * | ASID | TG | SCALE | NUM | TTL | BADDR | * +-----------------+-------+-------+-------+----------------------+ * |63 48|47 46|45 44|43 39|38 37|36 0| * - * The address range is determined by below formula: - * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE) + * The address range is determined by below formula: [BADDR, BADDR + (NUM + 1) * + * 2^(5*SCALE + 1) * PAGESIZE) + * + * Note that the first argument, baddr, is pre-shifted; If LPA2 is in use, BADDR + * holds addr[52:16]. Else BADDR holds page number. See for example ARM DDI + * 0487J.a section C5.5.60 "TLBI VAE1IS, TLBI VAE1ISNXS, TLB Invalidate by VA, + * EL1, Inner Shareable". * */ -#define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl) \ - ({ \ - unsigned long __ta = (addr) >> PAGE_SHIFT; \ - __ta &= GENMASK_ULL(36, 0); \ - __ta |= (unsigned long)(ttl) << 37; \ - __ta |= (unsigned long)(num) << 39; \ - __ta |= (unsigned long)(scale) << 44; \ - __ta |= get_trans_granule() << 46; \ - __ta |= (unsigned long)(asid) << 48; \ - __ta; \ +#define __TLBI_VADDR_RANGE(baddr, asid, scale, num, ttl) \ + ({ \ + unsigned long __ta = (baddr); \ + unsigned long __ttl = (ttl >= 1 && ttl <= 3) ? ttl : 0; \ + __ta &= GENMASK_ULL(36, 0); \ + __ta |= __ttl << 37; \ + __ta |= (unsigned long)(num) << 39; \ + __ta |= (unsigned long)(scale) << 44; \ + __ta |= get_trans_granule() << 46; \ + __ta |= (unsigned long)(asid) << 48; \ + __ta; \ }) /* These macros are used by the TLBI RANGE feature. */ @@ -152,12 +161,18 @@ static inline unsigned long get_trans_granule(void) #define MAX_TLBI_RANGE_PAGES __TLBI_RANGE_PAGES(31, 3) /* - * Generate 'num' values from -1 to 30 with -1 rejected by the - * __flush_tlb_range() loop below. + * Generate 'num' values from -1 to 31 with -1 rejected by the + * __flush_tlb_range() loop below. Its return value is only + * significant for a maximum of MAX_TLBI_RANGE_PAGES pages. If + * 'pages' is more than that, you must iterate over the overall + * range. */ -#define TLBI_RANGE_MASK GENMASK_ULL(4, 0) -#define __TLBI_RANGE_NUM(pages, scale) \ - ((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1) +#define __TLBI_RANGE_NUM(pages, scale) \ + ({ \ + int __pages = min((pages), \ + __TLBI_RANGE_PAGES(31, (scale))); \ + (__pages >> (5 * (scale) + 1)) - 1; \ + }) /* * TLB Invalidation @@ -216,12 +231,16 @@ static inline unsigned long get_trans_granule(void) * CPUs, ensuring that any walk-cache entries associated with the * translation are also invalidated. * - * __flush_tlb_range(vma, start, end, stride, last_level) + * __flush_tlb_range(vma, start, end, stride, last_level, tlb_level) * Invalidate the virtual-address range '[start, end)' on all * CPUs for the user address space corresponding to 'vma->mm'. * The invalidation operations are issued at a granularity * determined by 'stride' and only affect any walk-cache entries - * if 'last_level' is equal to false. + * if 'last_level' is equal to false. tlb_level is the level at + * which the invalidation must take place. If the level is wrong, + * no invalidation may take place. In the case where the level + * cannot be easily determined, the value TLBI_TTL_UNKNOWN will + * perform a non-hinted invalidation. * * * Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented @@ -345,34 +364,40 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch) * @tlb_level: Translation Table level hint, if known * @tlbi_user: If 'true', call an additional __tlbi_user() * (typically for user ASIDs). 'flase' for IPA instructions + * @lpa2: If 'true', the lpa2 scheme is used as set out below * * When the CPU does not support TLB range operations, flush the TLB * entries one by one at the granularity of 'stride'. If the TLB * range ops are supported, then: * - * 1. If 'pages' is odd, flush the first page through non-range - * operations; + * 1. If FEAT_LPA2 is in use, the start address of a range operation must be + * 64KB aligned, so flush pages one by one until the alignment is reached + * using the non-range operations. This step is skipped if LPA2 is not in + * use. * - * 2. For remaining pages: the minimum range granularity is decided - * by 'scale', so multiple range TLBI operations may be required. - * Start from scale = 0, flush the corresponding number of pages - * ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it - * until no pages left. + * 2. The minimum range granularity is decided by 'scale', so multiple range + * TLBI operations may be required. Start from scale = 3, flush the largest + * possible number of pages ((num+1)*2^(5*scale+1)) that fit into the + * requested range, then decrement scale and continue until one or zero pages + * are left. We must start from highest scale to ensure 64KB start alignment + * is maintained in the LPA2 case. * - * Note that certain ranges can be represented by either num = 31 and - * scale or num = 0 and scale + 1. The loop below favours the latter - * since num is limited to 30 by the __TLBI_RANGE_NUM() macro. + * 3. If there is 1 page remaining, flush it through non-range operations. Range + * operations can only span an even number of pages. We save this for last to + * ensure 64KB start alignment is maintained for the LPA2 case. */ #define __flush_tlb_range_op(op, start, pages, stride, \ - asid, tlb_level, tlbi_user) \ + asid, tlb_level, tlbi_user, lpa2) \ do { \ int num = 0; \ - int scale = 0; \ + int scale = 3; \ + int shift = lpa2 ? 16 : PAGE_SHIFT; \ unsigned long addr; \ \ while (pages > 0) { \ if (!system_supports_tlb_range() || \ - pages % 2 == 1) { \ + pages == 1 || \ + (lpa2 && start != ALIGN(start, SZ_64K))) { \ addr = __TLBI_VADDR(start, asid); \ __tlbi_level(op, addr, tlb_level); \ if (tlbi_user) \ @@ -384,20 +409,20 @@ do { \ \ num = __TLBI_RANGE_NUM(pages, scale); \ if (num >= 0) { \ - addr = __TLBI_VADDR_RANGE(start, asid, scale, \ - num, tlb_level); \ + addr = __TLBI_VADDR_RANGE(start >> shift, asid, \ + scale, num, tlb_level); \ __tlbi(r##op, addr); \ if (tlbi_user) \ __tlbi_user(r##op, addr); \ start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \ pages -= __TLBI_RANGE_PAGES(num, scale); \ } \ - scale++; \ + scale--; \ } \ } while (0) #define __flush_s2_tlb_range_op(op, start, pages, stride, tlb_level) \ - __flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false) + __flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false, kvm_lpa2_is_enabled()); static inline void __flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end, @@ -427,9 +452,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, asid = ASID(vma->vm_mm); if (last_level) - __flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true); + __flush_tlb_range_op(vale1is, start, pages, stride, asid, + tlb_level, true, lpa2_is_enabled()); else - __flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true); + __flush_tlb_range_op(vae1is, start, pages, stride, asid, + tlb_level, true, lpa2_is_enabled()); dsb(ish); mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, start, end); @@ -441,9 +468,10 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, /* * We cannot use leaf-only invalidation here, since we may be invalidating * table entries as part of collapsing hugepages or moving page tables. - * Set the tlb_level to 0 because we can not get enough information here. + * Set the tlb_level to TLBI_TTL_UNKNOWN because we can not get enough + * information here. */ - __flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0); + __flush_tlb_range(vma, start, end, PAGE_SIZE, false, TLBI_TTL_UNKNOWN); } static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h index 9fab663dd2..a323b109b9 100644 --- a/arch/arm64/include/asm/topology.h +++ b/arch/arm64/include/asm/topology.h @@ -23,6 +23,7 @@ void update_freq_counters_refs(void); #define arch_set_freq_scale topology_set_freq_scale #define arch_scale_freq_capacity topology_get_freq_scale #define arch_scale_freq_invariant topology_scale_freq_invariant +#define arch_scale_freq_ref topology_get_freq_ref #ifdef CONFIG_ACPI_CPPC_LIB #define arch_init_invariance_cppc topology_init_cpu_capacity_cppc diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index 531effca5f..491b2b9bd5 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -39,7 +39,7 @@ #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5) #define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 457 +#define __NR_compat_syscalls 462 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 9f7c1bf995..7118282d1c 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -919,6 +919,16 @@ __SYSCALL(__NR_futex_wake, sys_futex_wake) __SYSCALL(__NR_futex_wait, sys_futex_wait) #define __NR_futex_requeue 456 __SYSCALL(__NR_futex_requeue, sys_futex_requeue) +#define __NR_statmount 457 +__SYSCALL(__NR_statmount, sys_statmount) +#define __NR_listmount 458 +__SYSCALL(__NR_listmount, sys_listmount) +#define __NR_lsm_get_self_attr 459 +__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr) +#define __NR_lsm_set_self_attr 460 +__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr) +#define __NR_lsm_list_modules 461 +__SYSCALL(__NR_lsm_list_modules, sys_lsm_list_modules) /* * Please add new compat syscalls above this comment and update diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h index b4ae321099..4305995c8f 100644 --- a/arch/arm64/include/asm/vdso.h +++ b/arch/arm64/include/asm/vdso.h @@ -17,9 +17,6 @@ #ifndef __ASSEMBLY__ #include <generated/vdso-offsets.h> -#ifdef CONFIG_COMPAT_VDSO -#include <generated/vdso32-offsets.h> -#endif #define VDSO_SYMBOL(base, name) \ ({ \ diff --git a/arch/arm64/include/asm/vncr_mapping.h b/arch/arm64/include/asm/vncr_mapping.h new file mode 100644 index 0000000000..df2c47c559 --- /dev/null +++ b/arch/arm64/include/asm/vncr_mapping.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * System register offsets in the VNCR page + * All offsets are *byte* displacements! + */ + +#ifndef __ARM64_VNCR_MAPPING_H__ +#define __ARM64_VNCR_MAPPING_H__ + +#define VNCR_VTTBR_EL2 0x020 +#define VNCR_VTCR_EL2 0x040 +#define VNCR_VMPIDR_EL2 0x050 +#define VNCR_CNTVOFF_EL2 0x060 +#define VNCR_HCR_EL2 0x078 +#define VNCR_HSTR_EL2 0x080 +#define VNCR_VPIDR_EL2 0x088 +#define VNCR_TPIDR_EL2 0x090 +#define VNCR_HCRX_EL2 0x0A0 +#define VNCR_VNCR_EL2 0x0B0 +#define VNCR_CPACR_EL1 0x100 +#define VNCR_CONTEXTIDR_EL1 0x108 +#define VNCR_SCTLR_EL1 0x110 +#define VNCR_ACTLR_EL1 0x118 +#define VNCR_TCR_EL1 0x120 +#define VNCR_AFSR0_EL1 0x128 +#define VNCR_AFSR1_EL1 0x130 +#define VNCR_ESR_EL1 0x138 +#define VNCR_MAIR_EL1 0x140 +#define VNCR_AMAIR_EL1 0x148 +#define VNCR_MDSCR_EL1 0x158 +#define VNCR_SPSR_EL1 0x160 +#define VNCR_CNTV_CVAL_EL0 0x168 +#define VNCR_CNTV_CTL_EL0 0x170 +#define VNCR_CNTP_CVAL_EL0 0x178 +#define VNCR_CNTP_CTL_EL0 0x180 +#define VNCR_SCXTNUM_EL1 0x188 +#define VNCR_TFSR_EL1 0x190 +#define VNCR_HFGRTR_EL2 0x1B8 +#define VNCR_HFGWTR_EL2 0x1C0 +#define VNCR_HFGITR_EL2 0x1C8 +#define VNCR_HDFGRTR_EL2 0x1D0 +#define VNCR_HDFGWTR_EL2 0x1D8 +#define VNCR_ZCR_EL1 0x1E0 +#define VNCR_HAFGRTR_EL2 0x1E8 +#define VNCR_TTBR0_EL1 0x200 +#define VNCR_TTBR1_EL1 0x210 +#define VNCR_FAR_EL1 0x220 +#define VNCR_ELR_EL1 0x230 +#define VNCR_SP_EL1 0x240 +#define VNCR_VBAR_EL1 0x250 +#define VNCR_TCR2_EL1 0x270 +#define VNCR_PIRE0_EL1 0x290 +#define VNCR_PIRE0_EL2 0x298 +#define VNCR_PIR_EL1 0x2A0 +#define VNCR_ICH_LR0_EL2 0x400 +#define VNCR_ICH_LR1_EL2 0x408 +#define VNCR_ICH_LR2_EL2 0x410 +#define VNCR_ICH_LR3_EL2 0x418 +#define VNCR_ICH_LR4_EL2 0x420 +#define VNCR_ICH_LR5_EL2 0x428 +#define VNCR_ICH_LR6_EL2 0x430 +#define VNCR_ICH_LR7_EL2 0x438 +#define VNCR_ICH_LR8_EL2 0x440 +#define VNCR_ICH_LR9_EL2 0x448 +#define VNCR_ICH_LR10_EL2 0x450 +#define VNCR_ICH_LR11_EL2 0x458 +#define VNCR_ICH_LR12_EL2 0x460 +#define VNCR_ICH_LR13_EL2 0x468 +#define VNCR_ICH_LR14_EL2 0x470 +#define VNCR_ICH_LR15_EL2 0x478 +#define VNCR_ICH_AP0R0_EL2 0x480 +#define VNCR_ICH_AP0R1_EL2 0x488 +#define VNCR_ICH_AP0R2_EL2 0x490 +#define VNCR_ICH_AP0R3_EL2 0x498 +#define VNCR_ICH_AP1R0_EL2 0x4A0 +#define VNCR_ICH_AP1R1_EL2 0x4A8 +#define VNCR_ICH_AP1R2_EL2 0x4B0 +#define VNCR_ICH_AP1R3_EL2 0x4B8 +#define VNCR_ICH_HCR_EL2 0x4C0 +#define VNCR_ICH_VMCR_EL2 0x4C8 +#define VNCR_VDISR_EL2 0x500 +#define VNCR_PMBLIMITR_EL1 0x800 +#define VNCR_PMBPTR_EL1 0x810 +#define VNCR_PMBSR_EL1 0x820 +#define VNCR_PMSCR_EL1 0x828 +#define VNCR_PMSEVFR_EL1 0x830 +#define VNCR_PMSICR_EL1 0x838 +#define VNCR_PMSIRR_EL1 0x840 +#define VNCR_PMSLATFR_EL1 0x848 +#define VNCR_TRFCR_EL1 0x880 +#define VNCR_MPAM1_EL1 0x900 +#define VNCR_MPAMHCR_EL2 0x930 +#define VNCR_MPAMVPMV_EL2 0x938 +#define VNCR_MPAMVPM0_EL2 0x940 +#define VNCR_MPAMVPM1_EL2 0x948 +#define VNCR_MPAMVPM2_EL2 0x950 +#define VNCR_MPAMVPM3_EL2 0x958 +#define VNCR_MPAMVPM4_EL2 0x960 +#define VNCR_MPAMVPM5_EL2 0x968 +#define VNCR_MPAMVPM6_EL2 0x970 +#define VNCR_MPAMVPM7_EL2 0x978 + +#endif /* __ARM64_VNCR_MAPPING_H__ */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index d95b3d6b47..467cb71172 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -73,7 +73,13 @@ obj-$(CONFIG_ARM64_MTE) += mte.o obj-y += vdso-wrap.o obj-$(CONFIG_COMPAT_VDSO) += vdso32-wrap.o obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS) += patch-scs.o + +# We need to prevent the SCS patching code from patching itself. Using +# -mbranch-protection=none here to avoid the patchable PAC opcodes from being +# generated triggers an issue with full LTO on Clang, which stops emitting PAC +# instructions altogether. So disable LTO as well for the compilation unit. CFLAGS_patch-scs.o += -mbranch-protection=none +CFLAGS_REMOVE_patch-scs.o += $(CC_FLAGS_LTO) # Force dependency (vdso*-wrap.S includes vdso.so through incbin) $(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 5ff1942b04..5a7dbbe0ce 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -117,8 +117,6 @@ int main(void) DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE); BLANK(); DEFINE(PREEMPT_DISABLE_OFFSET, PREEMPT_DISABLE_OFFSET); - DEFINE(SOFTIRQ_SHIFT, SOFTIRQ_SHIFT); - DEFINE(IRQ_CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); BLANK(); DEFINE(CPU_BOOT_TASK, offsetof(struct secondary_data, task)); BLANK(); diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 91d2d67149..8d1a634a40 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1081,25 +1081,6 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info) if (id_aa64pfr1_mte(info->reg_id_aa64pfr1)) init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid); - - /* - * Initialize the indirect array of CPU capabilities pointers before we - * handle the boot CPU below. - */ - init_cpucap_indirect_list(); - - /* - * Detect broken pseudo-NMI. Must be called _before_ the call to - * setup_boot_cpu_capabilities() since it interacts with - * can_use_gic_priorities(). - */ - detect_system_supports_pseudo_nmi(); - - /* - * Detect and enable early CPU capabilities based on the boot CPU, - * after we have initialised the CPU feature infrastructure. - */ - setup_boot_cpu_capabilities(); } static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new) @@ -1584,16 +1565,6 @@ static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry, return has_sre; } -static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int __unused) -{ - u32 midr = read_cpuid_id(); - - /* Cavium ThunderX pass 1.x and 2.x */ - return midr_is_cpu_model_range(midr, MIDR_THUNDERX, - MIDR_CPU_VAR_REV(0, 0), - MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK)); -} - static bool has_cache_idc(const struct arm64_cpu_capabilities *entry, int scope) { @@ -1768,6 +1739,39 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, return !meltdown_safe; } +#if defined(ID_AA64MMFR0_EL1_TGRAN_LPA2) && defined(ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2) +static bool has_lpa2_at_stage1(u64 mmfr0) +{ + unsigned int tgran; + + tgran = cpuid_feature_extract_unsigned_field(mmfr0, + ID_AA64MMFR0_EL1_TGRAN_SHIFT); + return tgran == ID_AA64MMFR0_EL1_TGRAN_LPA2; +} + +static bool has_lpa2_at_stage2(u64 mmfr0) +{ + unsigned int tgran; + + tgran = cpuid_feature_extract_unsigned_field(mmfr0, + ID_AA64MMFR0_EL1_TGRAN_2_SHIFT); + return tgran == ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2; +} + +static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope) +{ + u64 mmfr0; + + mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); + return has_lpa2_at_stage1(mmfr0) && has_lpa2_at_stage2(mmfr0); +} +#else +static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope) +{ + return false; +} +#endif + #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 #define KPTI_NG_TEMP_VA (-(1UL << PMD_SHIFT)) @@ -1840,7 +1844,7 @@ static int __init __kpti_install_ng_mappings(void *__unused) static void __init kpti_install_ng_mappings(void) { /* Check whether KPTI is going to be used */ - if (!cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0)) + if (!arm64_kernel_unmapped_at_el0()) return; /* @@ -2326,12 +2330,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = { }, #endif /* CONFIG_ARM64_LSE_ATOMICS */ { - .desc = "Software prefetching using PRFM", - .capability = ARM64_HAS_NO_HW_PREFETCH, - .type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE, - .matches = has_no_hw_prefetch, - }, - { .desc = "Virtualization Host Extensions", .capability = ARM64_HAS_VIRT_HOST_EXTN, .type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE, @@ -2343,7 +2341,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_NESTED_VIRT, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_nested_virt_support, - ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP) + ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, NV2) }, { .capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE, @@ -2735,6 +2733,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_cpuid_feature, ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP) }, + { + .desc = "52-bit Virtual Addressing for KVM (LPA2)", + .capability = ARM64_HAS_LPA2, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_lpa2, + }, {}, }; @@ -3275,14 +3279,6 @@ void check_local_cpu_capabilities(void) verify_local_cpu_capabilities(); } -static void __init setup_boot_cpu_capabilities(void) -{ - /* Detect capabilities with either SCOPE_BOOT_CPU or SCOPE_LOCAL_CPU */ - update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU); - /* Enable the SCOPE_BOOT_CPU capabilities alone right away */ - enable_cpu_capabilities(SCOPE_BOOT_CPU); -} - bool this_cpu_has_cap(unsigned int n) { if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) { @@ -3338,37 +3334,52 @@ unsigned long cpu_get_elf_hwcap2(void) return elf_hwcap[1]; } -void __init setup_system_features(void) +static void __init setup_boot_cpu_capabilities(void) { - int i; /* - * The system-wide safe feature feature register values have been - * finalized. Finalize and log the available system capabilities. + * The boot CPU's feature register values have been recorded. Detect + * boot cpucaps and local cpucaps for the boot CPU, then enable and + * patch alternatives for the available boot cpucaps. */ - update_cpu_capabilities(SCOPE_SYSTEM); - if (IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN) && - !cpus_have_cap(ARM64_HAS_PAN)) - pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n"); + update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU); + enable_cpu_capabilities(SCOPE_BOOT_CPU); + apply_boot_alternatives(); +} +void __init setup_boot_cpu_features(void) +{ /* - * Enable all the available capabilities which have not been enabled - * already. + * Initialize the indirect array of CPU capabilities pointers before we + * handle the boot CPU. */ - enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU); + init_cpucap_indirect_list(); - kpti_install_ng_mappings(); + /* + * Detect broken pseudo-NMI. Must be called _before_ the call to + * setup_boot_cpu_capabilities() since it interacts with + * can_use_gic_priorities(). + */ + detect_system_supports_pseudo_nmi(); - sve_setup(); - sme_setup(); + setup_boot_cpu_capabilities(); +} +static void __init setup_system_capabilities(void) +{ /* - * Check for sane CTR_EL0.CWG value. + * The system-wide safe feature register values have been finalized. + * Detect, enable, and patch alternatives for the available system + * cpucaps. */ - if (!cache_type_cwg()) - pr_warn("No Cache Writeback Granule information, assuming %d\n", - ARCH_DMA_MINALIGN); + update_cpu_capabilities(SCOPE_SYSTEM); + enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU); + apply_alternatives_all(); - for (i = 0; i < ARM64_NCAPS; i++) { + /* + * Log any cpucaps with a cpumask as these aren't logged by + * update_cpu_capabilities(). + */ + for (int i = 0; i < ARM64_NCAPS; i++) { const struct arm64_cpu_capabilities *caps = cpucap_ptrs[i]; if (caps && caps->cpus && caps->desc && @@ -3376,6 +3387,29 @@ void __init setup_system_features(void) pr_info("detected: %s on CPU%*pbl\n", caps->desc, cpumask_pr_args(caps->cpus)); } + + /* + * TTBR0 PAN doesn't have its own cpucap, so log it manually. + */ + if (system_uses_ttbr0_pan()) + pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n"); +} + +void __init setup_system_features(void) +{ + setup_system_capabilities(); + + kpti_install_ng_mappings(); + + sve_setup(); + sme_setup(); + + /* + * Check for sane CTR_EL0.CWG value. + */ + if (!cache_type_cwg()) + pr_warn("No Cache Writeback Granule information, assuming %d\n", + ARCH_DMA_MINALIGN); } void __init setup_user_features(void) diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index a257da7b56..47043c0d95 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -36,8 +36,6 @@ static struct cpuinfo_arm64 boot_cpu_data; static inline const char *icache_policy_str(int l1ip) { switch (l1ip) { - case CTR_EL0_L1Ip_VPIPT: - return "VPIPT"; case CTR_EL0_L1Ip_VIPT: return "VIPT"; case CTR_EL0_L1Ip_PIPT: @@ -388,9 +386,6 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info) switch (l1ip) { case CTR_EL0_L1Ip_PIPT: break; - case CTR_EL0_L1Ip_VPIPT: - set_bit(ICACHEF_VPIPT, &__icache_flags); - break; case CTR_EL0_L1Ip_VIPT: default: /* Assume aliasing */ diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 7fcbee0f6c..7ef0e127b1 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -442,24 +442,23 @@ alternative_else_nop_endif .L_skip_tramp_exit_\@: #endif + .endif + ldr lr, [sp, #S_LR] add sp, sp, #PT_REGS_SIZE // restore sp + .if \el == 0 /* This must be after the last explicit memory access */ alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD tlbi vale1, xzr dsb nsh alternative_else_nop_endif - eret .else - ldr lr, [sp, #S_LR] - add sp, sp, #PT_REGS_SIZE // restore sp - /* Ensure any device/NC reads complete */ alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412 + .endif eret - .endif sb .endm diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 0898ac9979..f27acca550 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -85,13 +85,13 @@ * softirq kicks in. Upon vcpu_put(), KVM will save the vcpu FP state and * flag the register state as invalid. * - * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may - * save the task's FPSIMD context back to task_struct from softirq context. - * To prevent this from racing with the manipulation of the task's FPSIMD state - * from task context and thereby corrupting the state, it is necessary to - * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE - * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to - * run but prevent them to use FPSIMD. + * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may be + * called from softirq context, which will save the task's FPSIMD context back + * to task_struct. To prevent this from racing with the manipulation of the + * task's FPSIMD state from task context and thereby corrupting the state, it + * is necessary to protect any manipulation of a task's fpsimd_state or + * TIF_FOREIGN_FPSTATE flag with get_cpu_fpsimd_context(), which will suspend + * softirq servicing entirely until put_cpu_fpsimd_context() is called. * * For a certain task, the sequence may look something like this: * - the task gets scheduled in; if both the task's fpsimd_cpu field @@ -209,27 +209,14 @@ static inline void sme_free(struct task_struct *t) { } #endif -DEFINE_PER_CPU(bool, fpsimd_context_busy); -EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy); - static void fpsimd_bind_task_to_cpu(void); -static void __get_cpu_fpsimd_context(void) -{ - bool busy = __this_cpu_xchg(fpsimd_context_busy, true); - - WARN_ON(busy); -} - /* * Claim ownership of the CPU FPSIMD context for use by the calling context. * * The caller may freely manipulate the FPSIMD context metadata until * put_cpu_fpsimd_context() is called. * - * The double-underscore version must only be called if you know the task - * can't be preempted. - * * On RT kernels local_bh_disable() is not sufficient because it only * serializes soft interrupt related sections via a local lock, but stays * preemptible. Disabling preemption is the right choice here as bottom @@ -242,14 +229,6 @@ static void get_cpu_fpsimd_context(void) local_bh_disable(); else preempt_disable(); - __get_cpu_fpsimd_context(); -} - -static void __put_cpu_fpsimd_context(void) -{ - bool busy = __this_cpu_xchg(fpsimd_context_busy, false); - - WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */ } /* @@ -261,18 +240,12 @@ static void __put_cpu_fpsimd_context(void) */ static void put_cpu_fpsimd_context(void) { - __put_cpu_fpsimd_context(); if (!IS_ENABLED(CONFIG_PREEMPT_RT)) local_bh_enable(); else preempt_enable(); } -static bool have_cpu_fpsimd_context(void) -{ - return !preemptible() && __this_cpu_read(fpsimd_context_busy); -} - unsigned int task_get_vl(const struct task_struct *task, enum vec_type type) { return task->thread.vl[type]; @@ -383,7 +356,8 @@ static void task_fpsimd_load(void) bool restore_ffr; WARN_ON(!system_supports_fpsimd()); - WARN_ON(!have_cpu_fpsimd_context()); + WARN_ON(preemptible()); + WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE)); if (system_supports_sve() || system_supports_sme()) { switch (current->thread.fp_type) { @@ -406,7 +380,7 @@ static void task_fpsimd_load(void) default: /* * This indicates either a bug in - * fpsimd_save() or memory corruption, we + * fpsimd_save_user_state() or memory corruption, we * should always record an explicit format * when we save. We always at least have the * memory allocated for FPSMID registers so @@ -457,7 +431,7 @@ static void task_fpsimd_load(void) * than via current, if we are saving KVM state then it will have * ensured that the type of registers to save is set in last->to_save. */ -static void fpsimd_save(void) +static void fpsimd_save_user_state(void) { struct cpu_fp_state const *last = this_cpu_ptr(&fpsimd_last_state); @@ -467,7 +441,7 @@ static void fpsimd_save(void) unsigned int vl; WARN_ON(!system_supports_fpsimd()); - WARN_ON(!have_cpu_fpsimd_context()); + WARN_ON(preemptible()); if (test_thread_flag(TIF_FOREIGN_FPSTATE)) return; @@ -888,7 +862,7 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type, if (task == current) { get_cpu_fpsimd_context(); - fpsimd_save(); + fpsimd_save_user_state(); } fpsimd_flush_task_state(task); @@ -924,10 +898,8 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type, * allocate SVE now in case it is needed for use in streaming * mode. */ - if (system_supports_sve()) { - sve_free(task); - sve_alloc(task, true); - } + sve_free(task); + sve_alloc(task, true); if (free_sme) sme_free(task); @@ -1171,7 +1143,7 @@ void __init sve_setup(void) unsigned long b; int max_bit; - if (!cpus_have_cap(ARM64_SVE)) + if (!system_supports_sve()) return; /* @@ -1303,7 +1275,7 @@ void __init sme_setup(void) struct vl_info *info = &vl_info[ARM64_VEC_SME]; int min_bit, max_bit; - if (!cpus_have_cap(ARM64_SME)) + if (!system_supports_sme()) return; /* @@ -1518,6 +1490,34 @@ void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs) current); } +static void fpsimd_load_kernel_state(struct task_struct *task) +{ + struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state); + + /* + * Elide the load if this CPU holds the most recent kernel mode + * FPSIMD context of the current task. + */ + if (last->st == &task->thread.kernel_fpsimd_state && + task->thread.kernel_fpsimd_cpu == smp_processor_id()) + return; + + fpsimd_load_state(&task->thread.kernel_fpsimd_state); +} + +static void fpsimd_save_kernel_state(struct task_struct *task) +{ + struct cpu_fp_state cpu_fp_state = { + .st = &task->thread.kernel_fpsimd_state, + .to_save = FP_STATE_FPSIMD, + }; + + fpsimd_save_state(&task->thread.kernel_fpsimd_state); + fpsimd_bind_state_to_cpu(&cpu_fp_state); + + task->thread.kernel_fpsimd_cpu = smp_processor_id(); +} + void fpsimd_thread_switch(struct task_struct *next) { bool wrong_task, wrong_cpu; @@ -1525,24 +1525,31 @@ void fpsimd_thread_switch(struct task_struct *next) if (!system_supports_fpsimd()) return; - __get_cpu_fpsimd_context(); + WARN_ON_ONCE(!irqs_disabled()); /* Save unsaved fpsimd state, if any: */ - fpsimd_save(); - - /* - * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's - * state. For kernel threads, FPSIMD registers are never loaded - * and wrong_task and wrong_cpu will always be true. - */ - wrong_task = __this_cpu_read(fpsimd_last_state.st) != - &next->thread.uw.fpsimd_state; - wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id(); + if (test_thread_flag(TIF_KERNEL_FPSTATE)) + fpsimd_save_kernel_state(current); + else + fpsimd_save_user_state(); - update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE, - wrong_task || wrong_cpu); + if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) { + fpsimd_load_kernel_state(next); + set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE); + } else { + /* + * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's + * state. For kernel threads, FPSIMD registers are never + * loaded with user mode FPSIMD state and so wrong_task and + * wrong_cpu will always be true. + */ + wrong_task = __this_cpu_read(fpsimd_last_state.st) != + &next->thread.uw.fpsimd_state; + wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id(); - __put_cpu_fpsimd_context(); + update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE, + wrong_task || wrong_cpu); + } } static void fpsimd_flush_thread_vl(enum vec_type type) @@ -1632,7 +1639,7 @@ void fpsimd_preserve_current_state(void) return; get_cpu_fpsimd_context(); - fpsimd_save(); + fpsimd_save_user_state(); put_cpu_fpsimd_context(); } @@ -1844,13 +1851,15 @@ static void fpsimd_flush_cpu_state(void) */ void fpsimd_save_and_flush_cpu_state(void) { + unsigned long flags; + if (!system_supports_fpsimd()) return; WARN_ON(preemptible()); - __get_cpu_fpsimd_context(); - fpsimd_save(); + local_irq_save(flags); + fpsimd_save_user_state(); fpsimd_flush_cpu_state(); - __put_cpu_fpsimd_context(); + local_irq_restore(flags); } #ifdef CONFIG_KERNEL_MODE_NEON @@ -1882,10 +1891,37 @@ void kernel_neon_begin(void) get_cpu_fpsimd_context(); /* Save unsaved fpsimd state, if any: */ - fpsimd_save(); + if (test_thread_flag(TIF_KERNEL_FPSTATE)) { + BUG_ON(IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq()); + fpsimd_save_kernel_state(current); + } else { + fpsimd_save_user_state(); + + /* + * Set the thread flag so that the kernel mode FPSIMD state + * will be context switched along with the rest of the task + * state. + * + * On non-PREEMPT_RT, softirqs may interrupt task level kernel + * mode FPSIMD, but the task will not be preemptible so setting + * TIF_KERNEL_FPSTATE for those would be both wrong (as it + * would mark the task context FPSIMD state as requiring a + * context switch) and unnecessary. + * + * On PREEMPT_RT, softirqs are serviced from a separate thread, + * which is scheduled as usual, and this guarantees that these + * softirqs are not interrupting use of the FPSIMD in kernel + * mode in task context. So in this case, setting the flag here + * is always appropriate. + */ + if (IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq()) + set_thread_flag(TIF_KERNEL_FPSTATE); + } /* Invalidate any task state remaining in the fpsimd regs: */ fpsimd_flush_cpu_state(); + + put_cpu_fpsimd_context(); } EXPORT_SYMBOL_GPL(kernel_neon_begin); @@ -1903,7 +1939,16 @@ void kernel_neon_end(void) if (!system_supports_fpsimd()) return; - put_cpu_fpsimd_context(); + /* + * If we are returning from a nested use of kernel mode FPSIMD, restore + * the task context kernel mode FPSIMD state. This can only happen when + * running in softirq context on non-PREEMPT_RT. + */ + if (!IS_ENABLED(CONFIG_PREEMPT_RT) && in_serving_softirq() && + test_thread_flag(TIF_KERNEL_FPSTATE)) + fpsimd_load_kernel_state(current); + else + clear_thread_flag(TIF_KERNEL_FPSTATE); } EXPORT_SYMBOL_GPL(kernel_neon_end); diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 7b236994f0..a92905e6d4 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -482,7 +482,7 @@ SYM_FUNC_START_LOCAL(__primary_switched) str_l x21, __fdt_pointer, x5 // Save FDT pointer - ldr_l x4, kimage_vaddr // Save the offset between + adrp x4, _text // Save the offset between sub x4, x4, x0 // the kernel virtual and str_l x4, kimage_voffset, x5 // physical mappings @@ -569,6 +569,11 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL) adr_l x1, __hyp_text_end adr_l x2, dcache_clean_poc blr x2 + + mov_q x0, INIT_SCTLR_EL2_MMU_OFF + pre_disable_mmu_workaround + msr sctlr_el2, x0 + isb 0: mov_q x0, HCR_HOST_NVHE_FLAGS msr hcr_el2, x0 diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c index 3addc09f87..e30fd9e32e 100644 --- a/arch/arm64/kernel/idreg-override.c +++ b/arch/arm64/kernel/idreg-override.c @@ -21,14 +21,25 @@ static u64 __boot_status __initdata; +// temporary __prel64 related definitions +// to be removed when this code is moved under pi/ + +#define __prel64_initconst __initconst + +#define PREL64(type, name) union { type *name; } + +#define prel64_pointer(__d) (__d) + +typedef bool filter_t(u64 val); + struct ftr_set_desc { char name[FTR_DESC_NAME_LEN]; - struct arm64_ftr_override *override; + PREL64(struct arm64_ftr_override, override); struct { char name[FTR_DESC_FIELD_LEN]; u8 shift; u8 width; - bool (*filter)(u64 val); + PREL64(filter_t, filter); } fields[]; }; @@ -46,7 +57,7 @@ static bool __init mmfr1_vh_filter(u64 val) val == 0); } -static const struct ftr_set_desc mmfr1 __initconst = { +static const struct ftr_set_desc mmfr1 __prel64_initconst = { .name = "id_aa64mmfr1", .override = &id_aa64mmfr1_override, .fields = { @@ -70,7 +81,7 @@ static bool __init pfr0_sve_filter(u64 val) return true; } -static const struct ftr_set_desc pfr0 __initconst = { +static const struct ftr_set_desc pfr0 __prel64_initconst = { .name = "id_aa64pfr0", .override = &id_aa64pfr0_override, .fields = { @@ -94,7 +105,7 @@ static bool __init pfr1_sme_filter(u64 val) return true; } -static const struct ftr_set_desc pfr1 __initconst = { +static const struct ftr_set_desc pfr1 __prel64_initconst = { .name = "id_aa64pfr1", .override = &id_aa64pfr1_override, .fields = { @@ -105,7 +116,7 @@ static const struct ftr_set_desc pfr1 __initconst = { }, }; -static const struct ftr_set_desc isar1 __initconst = { +static const struct ftr_set_desc isar1 __prel64_initconst = { .name = "id_aa64isar1", .override = &id_aa64isar1_override, .fields = { @@ -117,7 +128,7 @@ static const struct ftr_set_desc isar1 __initconst = { }, }; -static const struct ftr_set_desc isar2 __initconst = { +static const struct ftr_set_desc isar2 __prel64_initconst = { .name = "id_aa64isar2", .override = &id_aa64isar2_override, .fields = { @@ -128,7 +139,7 @@ static const struct ftr_set_desc isar2 __initconst = { }, }; -static const struct ftr_set_desc smfr0 __initconst = { +static const struct ftr_set_desc smfr0 __prel64_initconst = { .name = "id_aa64smfr0", .override = &id_aa64smfr0_override, .fields = { @@ -149,7 +160,7 @@ static bool __init hvhe_filter(u64 val) ID_AA64MMFR1_EL1_VH_SHIFT)); } -static const struct ftr_set_desc sw_features __initconst = { +static const struct ftr_set_desc sw_features __prel64_initconst = { .name = "arm64_sw", .override = &arm64_sw_feature_override, .fields = { @@ -159,22 +170,23 @@ static const struct ftr_set_desc sw_features __initconst = { }, }; -static const struct ftr_set_desc * const regs[] __initconst = { - &mmfr1, - &pfr0, - &pfr1, - &isar1, - &isar2, - &smfr0, - &sw_features, +static const +PREL64(const struct ftr_set_desc, reg) regs[] __prel64_initconst = { + { &mmfr1 }, + { &pfr0 }, + { &pfr1 }, + { &isar1 }, + { &isar2 }, + { &smfr0 }, + { &sw_features }, }; static const struct { char alias[FTR_ALIAS_NAME_LEN]; char feature[FTR_ALIAS_OPTION_LEN]; } aliases[] __initconst = { - { "kvm-arm.mode=nvhe", "id_aa64mmfr1.vh=0" }, - { "kvm-arm.mode=protected", "id_aa64mmfr1.vh=0" }, + { "kvm_arm.mode=nvhe", "id_aa64mmfr1.vh=0" }, + { "kvm_arm.mode=protected", "id_aa64mmfr1.vh=0" }, { "arm64.nosve", "id_aa64pfr0.sve=0" }, { "arm64.nosme", "id_aa64pfr1.sme=0" }, { "arm64.nobti", "id_aa64pfr1.bt=0" }, @@ -187,45 +199,61 @@ static const struct { { "nokaslr", "arm64_sw.nokaslr=1" }, }; -static int __init parse_nokaslr(char *unused) +static int __init parse_hexdigit(const char *p, u64 *v) { - /* nokaslr param handling is done by early cpufeature code */ + // skip "0x" if it comes next + if (p[0] == '0' && tolower(p[1]) == 'x') + p += 2; + + // check whether the RHS is a single hex digit + if (!isxdigit(p[0]) || (p[1] && !isspace(p[1]))) + return -EINVAL; + + *v = tolower(*p) - (isdigit(*p) ? '0' : 'a' - 10); return 0; } -early_param("nokaslr", parse_nokaslr); -static int __init find_field(const char *cmdline, +static int __init find_field(const char *cmdline, char *opt, int len, const struct ftr_set_desc *reg, int f, u64 *v) { - char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2]; - int len; + int flen = strlen(reg->fields[f].name); - len = snprintf(opt, ARRAY_SIZE(opt), "%s.%s=", - reg->name, reg->fields[f].name); + // append '<fieldname>=' to obtain '<name>.<fieldname>=' + memcpy(opt + len, reg->fields[f].name, flen); + len += flen; + opt[len++] = '='; - if (!parameqn(cmdline, opt, len)) + if (memcmp(cmdline, opt, len)) return -1; - return kstrtou64(cmdline + len, 0, v); + return parse_hexdigit(cmdline + len, v); } static void __init match_options(const char *cmdline) { + char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2]; int i; for (i = 0; i < ARRAY_SIZE(regs); i++) { + const struct ftr_set_desc *reg = prel64_pointer(regs[i].reg); + struct arm64_ftr_override *override; + int len = strlen(reg->name); int f; - if (!regs[i]->override) - continue; + override = prel64_pointer(reg->override); - for (f = 0; strlen(regs[i]->fields[f].name); f++) { - u64 shift = regs[i]->fields[f].shift; - u64 width = regs[i]->fields[f].width ?: 4; + // set opt[] to '<name>.' + memcpy(opt, reg->name, len); + opt[len++] = '.'; + + for (f = 0; reg->fields[f].name[0] != '\0'; f++) { + u64 shift = reg->fields[f].shift; + u64 width = reg->fields[f].width ?: 4; u64 mask = GENMASK_ULL(shift + width - 1, shift); + bool (*filter)(u64 val); u64 v; - if (find_field(cmdline, regs[i], f, &v)) + if (find_field(cmdline, opt, len, reg, f, &v)) continue; /* @@ -233,16 +261,16 @@ static void __init match_options(const char *cmdline) * it by setting the value to the all-ones while * clearing the mask... Yes, this is fragile. */ - if (regs[i]->fields[f].filter && - !regs[i]->fields[f].filter(v)) { - regs[i]->override->val |= mask; - regs[i]->override->mask &= ~mask; + filter = prel64_pointer(reg->fields[f].filter); + if (filter && !filter(v)) { + override->val |= mask; + override->mask &= ~mask; continue; } - regs[i]->override->val &= ~mask; - regs[i]->override->val |= (v << shift) & mask; - regs[i]->override->mask |= mask; + override->val &= ~mask; + override->val |= (v << shift) & mask; + override->mask |= mask; return; } @@ -258,23 +286,29 @@ static __init void __parse_cmdline(const char *cmdline, bool parse_aliases) cmdline = skip_spaces(cmdline); - for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++); - if (!len) + /* terminate on "--" appearing on the command line by itself */ + if (cmdline[0] == '-' && cmdline[1] == '-' && isspace(cmdline[2])) return; - len = min(len, ARRAY_SIZE(buf) - 1); - memcpy(buf, cmdline, len); - buf[len] = '\0'; - - if (strcmp(buf, "--") == 0) + for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++) { + if (len >= sizeof(buf) - 1) + break; + if (cmdline[len] == '-') + buf[len] = '_'; + else + buf[len] = cmdline[len]; + } + if (!len) return; + buf[len] = 0; + cmdline += len; match_options(buf); for (i = 0; parse_aliases && i < ARRAY_SIZE(aliases); i++) - if (parameq(buf, aliases[i].alias)) + if (!memcmp(buf, aliases[i].alias, len + 1)) __parse_cmdline(aliases[i].feature, false); } while (1); } @@ -316,13 +350,16 @@ void init_feature_override(u64 boot_status); asmlinkage void __init init_feature_override(u64 boot_status) { + struct arm64_ftr_override *override; + const struct ftr_set_desc *reg; int i; for (i = 0; i < ARRAY_SIZE(regs); i++) { - if (regs[i]->override) { - regs[i]->override->val = 0; - regs[i]->override->mask = 0; - } + reg = prel64_pointer(regs[i].reg); + override = prel64_pointer(reg->override); + + override->val = 0; + override->mask = 0; } __boot_status = boot_status; @@ -330,9 +367,9 @@ asmlinkage void __init init_feature_override(u64 boot_status) parse_cmdline(); for (i = 0; i < ARRAY_SIZE(regs); i++) { - if (regs[i]->override) - dcache_clean_inval_poc((unsigned long)regs[i]->override, - (unsigned long)regs[i]->override + - sizeof(*regs[i]->override)); + reg = prel64_pointer(regs[i].reg); + override = prel64_pointer(reg->override); + dcache_clean_inval_poc((unsigned long)override, + (unsigned long)(override + 1)); } } diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index 94a269cd1f..12c7f3c8ba 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -36,3 +36,10 @@ void __init kaslr_init(void) pr_info("KASLR enabled\n"); __kaslr_is_enabled = true; } + +static int __init parse_nokaslr(char *unused) +{ + /* nokaslr param handling is done by early cpufeature code */ + return 0; +} +early_param("nokaslr", parse_nokaslr); diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c index 636be67151..532d72ea42 100644 --- a/arch/arm64/kernel/kexec_image.c +++ b/arch/arm64/kernel/kexec_image.c @@ -122,9 +122,9 @@ static void *image_load(struct kimage *image, kernel_segment->memsz -= text_offset; image->start = kernel_segment->mem; - pr_debug("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n", - kernel_segment->mem, kbuf.bufsz, - kernel_segment->memsz); + kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + kernel_segment->mem, kbuf.bufsz, + kernel_segment->memsz); return NULL; } diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c index 078910db77..b38aae5b48 100644 --- a/arch/arm64/kernel/machine_kexec.c +++ b/arch/arm64/kernel/machine_kexec.c @@ -32,26 +32,12 @@ static void _kexec_image_info(const char *func, int line, const struct kimage *kimage) { - unsigned long i; - - pr_debug("%s:%d:\n", func, line); - pr_debug(" kexec kimage info:\n"); - pr_debug(" type: %d\n", kimage->type); - pr_debug(" start: %lx\n", kimage->start); - pr_debug(" head: %lx\n", kimage->head); - pr_debug(" nr_segments: %lu\n", kimage->nr_segments); - pr_debug(" dtb_mem: %pa\n", &kimage->arch.dtb_mem); - pr_debug(" kern_reloc: %pa\n", &kimage->arch.kern_reloc); - pr_debug(" el2_vectors: %pa\n", &kimage->arch.el2_vectors); - - for (i = 0; i < kimage->nr_segments; i++) { - pr_debug(" segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n", - i, - kimage->segment[i].mem, - kimage->segment[i].mem + kimage->segment[i].memsz, - kimage->segment[i].memsz, - kimage->segment[i].memsz / PAGE_SIZE); - } + kexec_dprintk("%s:%d:\n", func, line); + kexec_dprintk(" kexec kimage info:\n"); + kexec_dprintk(" type: %d\n", kimage->type); + kexec_dprintk(" head: %lx\n", kimage->head); + kexec_dprintk(" kern_reloc: %pa\n", &kimage->arch.kern_reloc); + kexec_dprintk(" el2_vectors: %pa\n", &kimage->arch.el2_vectors); } void machine_kexec_cleanup(struct kimage *kimage) diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c index a11a6e14ba..0e017358f4 100644 --- a/arch/arm64/kernel/machine_kexec_file.c +++ b/arch/arm64/kernel/machine_kexec_file.c @@ -127,8 +127,8 @@ int load_other_segments(struct kimage *image, image->elf_load_addr = kbuf.mem; image->elf_headers_sz = headers_sz; - pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n", - image->elf_load_addr, kbuf.bufsz, kbuf.memsz); + kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + image->elf_load_addr, kbuf.bufsz, kbuf.memsz); } /* load initrd */ @@ -148,8 +148,8 @@ int load_other_segments(struct kimage *image, goto out_err; initrd_load_addr = kbuf.mem; - pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n", - initrd_load_addr, kbuf.bufsz, kbuf.memsz); + kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + initrd_load_addr, kbuf.bufsz, kbuf.memsz); } /* load dtb */ @@ -179,8 +179,8 @@ int load_other_segments(struct kimage *image, image->arch.dtb = dtb; image->arch.dtb_mem = kbuf.mem; - pr_debug("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n", - kbuf.mem, kbuf.bufsz, kbuf.memsz); + kexec_dprintk("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + kbuf.mem, kbuf.bufsz, kbuf.memsz); return 0; diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile index 4c0ea3cd4e..c844a0546d 100644 --- a/arch/arm64/kernel/pi/Makefile +++ b/arch/arm64/kernel/pi/Makefile @@ -3,6 +3,7 @@ KBUILD_CFLAGS := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \ -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \ + $(DISABLE_LATENT_ENTROPY_PLUGIN) \ $(call cc-option,-mbranch-protection=none) \ -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \ -include $(srctree)/include/linux/hidden.h \ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index c94c0f8c9a..964d0446da 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -28,6 +28,7 @@ #include <linux/hw_breakpoint.h> #include <linux/regset.h> #include <linux/elf.h> +#include <linux/rseq.h> #include <asm/compat.h> #include <asm/cpufeature.h> @@ -728,7 +729,6 @@ static void sve_init_header_from_task(struct user_sve_header *header, { unsigned int vq; bool active; - bool fpsimd_only; enum vec_type task_type; memset(header, 0, sizeof(*header)); @@ -744,12 +744,10 @@ static void sve_init_header_from_task(struct user_sve_header *header, case ARM64_VEC_SVE: if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT)) header->flags |= SVE_PT_VL_INHERIT; - fpsimd_only = !test_tsk_thread_flag(target, TIF_SVE); break; case ARM64_VEC_SME: if (test_tsk_thread_flag(target, TIF_SME_VL_INHERIT)) header->flags |= SVE_PT_VL_INHERIT; - fpsimd_only = false; break; default: WARN_ON_ONCE(1); @@ -757,7 +755,7 @@ static void sve_init_header_from_task(struct user_sve_header *header, } if (active) { - if (fpsimd_only) { + if (target->thread.fp_type == FP_STATE_FPSIMD) { header->flags |= SVE_PT_REGS_FPSIMD; } else { header->flags |= SVE_PT_REGS_SVE; diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 417a8a86b2..42c690bb2d 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -402,19 +402,10 @@ static inline bool cpu_can_disable(unsigned int cpu) return false; } -static int __init topology_init(void) +bool arch_cpu_is_hotpluggable(int num) { - int i; - - for_each_possible_cpu(i) { - struct cpu *cpu = &per_cpu(cpu_data.cpu, i); - cpu->hotpluggable = cpu_can_disable(i); - register_cpu(cpu, i); - } - - return 0; + return cpu_can_disable(num); } -subsys_initcall(topology_init); static void dump_kernel_offset(void) { diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index defbab84e9..4ced34f62d 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -439,9 +439,8 @@ static void __init hyp_mode_check(void) void __init smp_cpus_done(unsigned int max_cpus) { pr_info("SMP: Total of %d processors activated.\n", num_online_cpus()); - setup_system_features(); hyp_mode_check(); - apply_alternatives_all(); + setup_system_features(); setup_user_features(); mark_linear_text_alias_ro(); } @@ -454,14 +453,9 @@ void __init smp_prepare_boot_cpu(void) * freed shortly, so we must move over to the runtime per-cpu area. */ set_my_cpu_offset(per_cpu_offset(smp_processor_id())); - cpuinfo_store_boot_cpu(); - /* - * We now know enough about the boot CPU to apply the - * alternatives that cannot wait until interrupt handling - * and/or scheduling is enabled. - */ - apply_boot_alternatives(); + cpuinfo_store_boot_cpu(); + setup_boot_cpu_features(); /* Conditionally switch to GIC PMR for interrupt masking */ if (system_uses_irq_prio_masking()) diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 17f66a74c7..b2a60e0bcf 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -8,6 +8,7 @@ #include <linux/efi.h> #include <linux/export.h> #include <linux/ftrace.h> +#include <linux/kprobes.h> #include <linux/sched.h> #include <linux/sched/debug.h> #include <linux/sched/task_stack.h> @@ -19,6 +20,31 @@ #include <asm/stacktrace.h> /* + * Kernel unwind state + * + * @common: Common unwind state. + * @task: The task being unwound. + * @kr_cur: When KRETPROBES is selected, holds the kretprobe instance + * associated with the most recently encountered replacement lr + * value. + */ +struct kunwind_state { + struct unwind_state common; + struct task_struct *task; +#ifdef CONFIG_KRETPROBES + struct llist_node *kr_cur; +#endif +}; + +static __always_inline void +kunwind_init(struct kunwind_state *state, + struct task_struct *task) +{ + unwind_init_common(&state->common); + state->task = task; +} + +/* * Start an unwind from a pt_regs. * * The unwind will begin at the PC within the regs. @@ -26,13 +52,13 @@ * The regs must be on a stack currently owned by the calling task. */ static __always_inline void -unwind_init_from_regs(struct unwind_state *state, - struct pt_regs *regs) +kunwind_init_from_regs(struct kunwind_state *state, + struct pt_regs *regs) { - unwind_init_common(state, current); + kunwind_init(state, current); - state->fp = regs->regs[29]; - state->pc = regs->pc; + state->common.fp = regs->regs[29]; + state->common.pc = regs->pc; } /* @@ -44,12 +70,12 @@ unwind_init_from_regs(struct unwind_state *state, * The function which invokes this must be noinline. */ static __always_inline void -unwind_init_from_caller(struct unwind_state *state) +kunwind_init_from_caller(struct kunwind_state *state) { - unwind_init_common(state, current); + kunwind_init(state, current); - state->fp = (unsigned long)__builtin_frame_address(1); - state->pc = (unsigned long)__builtin_return_address(0); + state->common.fp = (unsigned long)__builtin_frame_address(1); + state->common.pc = (unsigned long)__builtin_return_address(0); } /* @@ -63,35 +89,38 @@ unwind_init_from_caller(struct unwind_state *state) * call this for the current task. */ static __always_inline void -unwind_init_from_task(struct unwind_state *state, - struct task_struct *task) +kunwind_init_from_task(struct kunwind_state *state, + struct task_struct *task) { - unwind_init_common(state, task); + kunwind_init(state, task); - state->fp = thread_saved_fp(task); - state->pc = thread_saved_pc(task); + state->common.fp = thread_saved_fp(task); + state->common.pc = thread_saved_pc(task); } static __always_inline int -unwind_recover_return_address(struct unwind_state *state) +kunwind_recover_return_address(struct kunwind_state *state) { #ifdef CONFIG_FUNCTION_GRAPH_TRACER if (state->task->ret_stack && - (state->pc == (unsigned long)return_to_handler)) { + (state->common.pc == (unsigned long)return_to_handler)) { unsigned long orig_pc; - orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc, - (void *)state->fp); - if (WARN_ON_ONCE(state->pc == orig_pc)) + orig_pc = ftrace_graph_ret_addr(state->task, NULL, + state->common.pc, + (void *)state->common.fp); + if (WARN_ON_ONCE(state->common.pc == orig_pc)) return -EINVAL; - state->pc = orig_pc; + state->common.pc = orig_pc; } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #ifdef CONFIG_KRETPROBES - if (is_kretprobe_trampoline(state->pc)) { - state->pc = kretprobe_find_ret_addr(state->task, - (void *)state->fp, - &state->kr_cur); + if (is_kretprobe_trampoline(state->common.pc)) { + unsigned long orig_pc; + orig_pc = kretprobe_find_ret_addr(state->task, + (void *)state->common.fp, + &state->kr_cur); + state->common.pc = orig_pc; } #endif /* CONFIG_KRETPROBES */ @@ -106,38 +135,40 @@ unwind_recover_return_address(struct unwind_state *state) * and the location (but not the fp value) of B. */ static __always_inline int -unwind_next(struct unwind_state *state) +kunwind_next(struct kunwind_state *state) { struct task_struct *tsk = state->task; - unsigned long fp = state->fp; + unsigned long fp = state->common.fp; int err; /* Final frame; nothing to unwind */ if (fp == (unsigned long)task_pt_regs(tsk)->stackframe) return -ENOENT; - err = unwind_next_frame_record(state); + err = unwind_next_frame_record(&state->common); if (err) return err; - state->pc = ptrauth_strip_kernel_insn_pac(state->pc); + state->common.pc = ptrauth_strip_kernel_insn_pac(state->common.pc); - return unwind_recover_return_address(state); + return kunwind_recover_return_address(state); } +typedef bool (*kunwind_consume_fn)(const struct kunwind_state *state, void *cookie); + static __always_inline void -unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry, - void *cookie) +do_kunwind(struct kunwind_state *state, kunwind_consume_fn consume_state, + void *cookie) { - if (unwind_recover_return_address(state)) + if (kunwind_recover_return_address(state)) return; while (1) { int ret; - if (!consume_entry(cookie, state->pc)) + if (!consume_state(state, cookie)) break; - ret = unwind_next(state); + ret = kunwind_next(state); if (ret < 0) break; } @@ -172,9 +203,10 @@ unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry, : stackinfo_get_unknown(); \ }) -noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry, - void *cookie, struct task_struct *task, - struct pt_regs *regs) +static __always_inline void +kunwind_stack_walk(kunwind_consume_fn consume_state, + void *cookie, struct task_struct *task, + struct pt_regs *regs) { struct stack_info stacks[] = { stackinfo_get_task(task), @@ -190,22 +222,48 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry, STACKINFO_EFI, #endif }; - struct unwind_state state = { - .stacks = stacks, - .nr_stacks = ARRAY_SIZE(stacks), + struct kunwind_state state = { + .common = { + .stacks = stacks, + .nr_stacks = ARRAY_SIZE(stacks), + }, }; if (regs) { if (task != current) return; - unwind_init_from_regs(&state, regs); + kunwind_init_from_regs(&state, regs); } else if (task == current) { - unwind_init_from_caller(&state); + kunwind_init_from_caller(&state); } else { - unwind_init_from_task(&state, task); + kunwind_init_from_task(&state, task); } - unwind(&state, consume_entry, cookie); + do_kunwind(&state, consume_state, cookie); +} + +struct kunwind_consume_entry_data { + stack_trace_consume_fn consume_entry; + void *cookie; +}; + +static __always_inline bool +arch_kunwind_consume_entry(const struct kunwind_state *state, void *cookie) +{ + struct kunwind_consume_entry_data *data = cookie; + return data->consume_entry(data->cookie, state->common.pc); +} + +noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry, + void *cookie, struct task_struct *task, + struct pt_regs *regs) +{ + struct kunwind_consume_entry_data data = { + .consume_entry = consume_entry, + .cookie = cookie, + }; + + kunwind_stack_walk(arch_kunwind_consume_entry, &data, task, regs); } static bool dump_backtrace_entry(void *arg, unsigned long where) diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index 817d788cd8..1a2c72f3e7 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -82,7 +82,12 @@ int __init parse_acpi_topology(void) #undef pr_fmt #define pr_fmt(fmt) "AMU: " fmt -static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale); +/* + * Ensure that amu_scale_freq_tick() will return SCHED_CAPACITY_SCALE until + * the CPU capacity and its associated frequency have been correctly + * initialized. + */ +static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) = 1UL << (2 * SCHED_CAPACITY_SHIFT); static DEFINE_PER_CPU(u64, arch_const_cycles_prev); static DEFINE_PER_CPU(u64, arch_core_cycles_prev); static cpumask_var_t amu_fie_cpus; @@ -112,14 +117,14 @@ static inline bool freq_counters_valid(int cpu) return true; } -static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate) +void freq_inv_set_max_ratio(int cpu, u64 max_rate) { - u64 ratio; + u64 ratio, ref_rate = arch_timer_get_rate(); if (unlikely(!max_rate || !ref_rate)) { - pr_debug("CPU%d: invalid maximum or reference frequency.\n", + WARN_ONCE(1, "CPU%d: invalid maximum or reference frequency.\n", cpu); - return -EINVAL; + return; } /* @@ -139,12 +144,10 @@ static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate) ratio = div64_u64(ratio, max_rate); if (!ratio) { WARN_ONCE(1, "Reference frequency too low.\n"); - return -EINVAL; + return; } - per_cpu(arch_max_freq_scale, cpu) = (unsigned long)ratio; - - return 0; + WRITE_ONCE(per_cpu(arch_max_freq_scale, cpu), (unsigned long)ratio); } static void amu_scale_freq_tick(void) @@ -195,10 +198,7 @@ static void amu_fie_setup(const struct cpumask *cpus) return; for_each_cpu(cpu, cpus) { - if (!freq_counters_valid(cpu) || - freq_inv_set_max_ratio(cpu, - cpufreq_get_hw_max_freq(cpu) * 1000ULL, - arch_timer_get_rate())) + if (!freq_counters_valid(cpu)) return; } diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 1f911a76c5..f5f80fdce0 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -118,7 +118,7 @@ endif VDSO_CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os # Build rules -targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso.so.dbg vdso.so.raw +targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso32.so.dbg vdso.so.raw c-obj-vdso := $(addprefix $(obj)/, $(c-obj-vdso)) c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday)) asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso)) @@ -127,15 +127,12 @@ obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) targets += vdso.lds CPPFLAGS_vdso.lds += -P -C -U$(ARCH) -include/generated/vdso32-offsets.h: $(obj)/vdso.so.dbg FORCE - $(call if_changed,vdsosym) - # Strip rule for vdso.so $(obj)/vdso.so: OBJCOPYFLAGS := -S -$(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE +$(obj)/vdso.so: $(obj)/vdso32.so.dbg FORCE $(call if_changed,objcopy) -$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE +$(obj)/vdso32.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE $(call if_changed,vdsomunge) # Link rule for the .so file, .lds has to be first @@ -166,9 +163,3 @@ quiet_cmd_vdsoas = AS32 $@ quiet_cmd_vdsomunge = MUNGE $@ cmd_vdsomunge = $(obj)/$(munge) $< $@ - -# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO) -gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh -quiet_cmd_vdsosym = VDSOSYM $@ -# The AArch64 nm should be able to read an AArch32 binary - cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ diff --git a/arch/arm64/kernel/vdso32/vgettimeofday.c b/arch/arm64/kernel/vdso32/vgettimeofday.c index 5acff29c59..29b4d8f61e 100644 --- a/arch/arm64/kernel/vdso32/vgettimeofday.c +++ b/arch/arm64/kernel/vdso32/vgettimeofday.c @@ -5,6 +5,8 @@ * Copyright (C) 2018 ARM Limited * */ +#define BUILD_VDSO32_64 +#include <vdso/gettime.h> int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts) diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index 83c1e09be4..27ca89b628 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -3,7 +3,6 @@ # KVM configuration # -source "virt/lib/Kconfig" source "virt/kvm/Kconfig" menuconfig VIRTUALIZATION @@ -21,16 +20,14 @@ if VIRTUALIZATION menuconfig KVM bool "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM + select KVM_COMMON select KVM_GENERIC_HARDWARE_ENABLING - select MMU_NOTIFIER - select PREEMPT_NOTIFIERS + select KVM_GENERIC_MMU_NOTIFIER select HAVE_KVM_CPU_RELAX_INTERCEPT select KVM_MMIO select KVM_GENERIC_DIRTYLOG_READ_PROTECT select KVM_XFER_TO_GUEST_WORK select KVM_VFIO - select HAVE_KVM_EVENTFD - select HAVE_KVM_IRQFD select HAVE_KVM_DIRTY_RING_ACQ_REL select NEED_KVM_DIRTY_RING_WITH_BITMAP select HAVE_KVM_MSI @@ -41,7 +38,6 @@ menuconfig KVM select HAVE_KVM_VCPU_RUN_PID_CHANGE select SCHED_INFO select GUEST_PERF_EVENTS if PERF_EVENTS - select INTERVAL_TREE select XARRAY_MULTI help Support hosting virtualized guest machines. diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c index 13ba691b84..9dec8c419b 100644 --- a/arch/arm64/kvm/arch_timer.c +++ b/arch/arm64/kvm/arch_timer.c @@ -295,8 +295,7 @@ static u64 wfit_delay_ns(struct kvm_vcpu *vcpu) u64 val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu)); struct arch_timer_context *ctx; - ctx = (vcpu_has_nv(vcpu) && is_hyp_ctxt(vcpu)) ? vcpu_hvtimer(vcpu) - : vcpu_vtimer(vcpu); + ctx = is_hyp_ctxt(vcpu) ? vcpu_hvtimer(vcpu) : vcpu_vtimer(vcpu); return kvm_counter_compute_delta(ctx, val); } diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 4796104c44..a25265aca4 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -221,7 +221,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) r = vgic_present; break; case KVM_CAP_IOEVENTFD: - case KVM_CAP_DEVICE_CTRL: case KVM_CAP_USER_MEMORY: case KVM_CAP_SYNC_MMU: case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: @@ -669,6 +668,12 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu) return ret; } + if (vcpu_has_nv(vcpu)) { + ret = kvm_init_nv_sysregs(vcpu->kvm); + if (ret) + return ret; + } + ret = kvm_timer_enable(vcpu); if (ret) return ret; @@ -1837,6 +1842,7 @@ static int kvm_init_vector_slots(void) static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits) { struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu); + u64 mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); unsigned long tcr; /* @@ -1859,6 +1865,10 @@ static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits) } tcr &= ~TCR_T0SZ_MASK; tcr |= TCR_T0SZ(hyp_va_bits); + tcr &= ~TCR_EL2_PS_MASK; + tcr |= FIELD_PREP(TCR_EL2_PS_MASK, kvm_get_parange(mmfr0)); + if (kvm_lpa2_is_enabled()) + tcr |= TCR_EL2_DS; params->tcr_el2 = tcr; params->pgd_pa = kvm_mmu_get_httbr(); diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c index 06185216a2..431fd42993 100644 --- a/arch/arm64/kvm/emulate-nested.c +++ b/arch/arm64/kvm/emulate-nested.c @@ -1012,6 +1012,7 @@ enum fgt_group_id { HDFGRTR_GROUP, HDFGWTR_GROUP, HFGITR_GROUP, + HAFGRTR_GROUP, /* Must be last */ __NR_FGT_GROUP_IDS__ @@ -1042,10 +1043,20 @@ enum fg_filter_id { static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = { /* HFGRTR_EL2, HFGWTR_EL2 */ + SR_FGT(SYS_AMAIR2_EL1, HFGxTR, nAMAIR2_EL1, 0), + SR_FGT(SYS_MAIR2_EL1, HFGxTR, nMAIR2_EL1, 0), + SR_FGT(SYS_S2POR_EL1, HFGxTR, nS2POR_EL1, 0), + SR_FGT(SYS_POR_EL1, HFGxTR, nPOR_EL1, 0), + SR_FGT(SYS_POR_EL0, HFGxTR, nPOR_EL0, 0), SR_FGT(SYS_PIR_EL1, HFGxTR, nPIR_EL1, 0), SR_FGT(SYS_PIRE0_EL1, HFGxTR, nPIRE0_EL1, 0), + SR_FGT(SYS_RCWMASK_EL1, HFGxTR, nRCWMASK_EL1, 0), SR_FGT(SYS_TPIDR2_EL0, HFGxTR, nTPIDR2_EL0, 0), SR_FGT(SYS_SMPRI_EL1, HFGxTR, nSMPRI_EL1, 0), + SR_FGT(SYS_GCSCR_EL1, HFGxTR, nGCS_EL1, 0), + SR_FGT(SYS_GCSPR_EL1, HFGxTR, nGCS_EL1, 0), + SR_FGT(SYS_GCSCRE0_EL1, HFGxTR, nGCS_EL0, 0), + SR_FGT(SYS_GCSPR_EL0, HFGxTR, nGCS_EL0, 0), SR_FGT(SYS_ACCDATA_EL1, HFGxTR, nACCDATA_EL1, 0), SR_FGT(SYS_ERXADDR_EL1, HFGxTR, ERXADDR_EL1, 1), SR_FGT(SYS_ERXPFGCDN_EL1, HFGxTR, ERXPFGCDN_EL1, 1), @@ -1107,6 +1118,11 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = { SR_FGT(SYS_AFSR1_EL1, HFGxTR, AFSR1_EL1, 1), SR_FGT(SYS_AFSR0_EL1, HFGxTR, AFSR0_EL1, 1), /* HFGITR_EL2 */ + SR_FGT(OP_AT_S1E1A, HFGITR, ATS1E1A, 1), + SR_FGT(OP_COSP_RCTX, HFGITR, COSPRCTX, 1), + SR_FGT(OP_GCSPUSHX, HFGITR, nGCSEPP, 0), + SR_FGT(OP_GCSPOPX, HFGITR, nGCSEPP, 0), + SR_FGT(OP_GCSPUSHM, HFGITR, nGCSPUSHM_EL1, 0), SR_FGT(OP_BRB_IALL, HFGITR, nBRBIALL, 0), SR_FGT(OP_BRB_INJ, HFGITR, nBRBINJ, 0), SR_FGT(SYS_DC_CVAC, HFGITR, DCCVAC, 1), @@ -1674,6 +1690,49 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = { SR_FGT(SYS_PMCR_EL0, HDFGWTR, PMCR_EL0, 1), SR_FGT(SYS_PMSWINC_EL0, HDFGWTR, PMSWINC_EL0, 1), SR_FGT(SYS_OSLAR_EL1, HDFGWTR, OSLAR_EL1, 1), + /* + * HAFGRTR_EL2 + */ + SR_FGT(SYS_AMEVTYPER1_EL0(15), HAFGRTR, AMEVTYPER115_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(14), HAFGRTR, AMEVTYPER114_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(13), HAFGRTR, AMEVTYPER113_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(12), HAFGRTR, AMEVTYPER112_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(11), HAFGRTR, AMEVTYPER111_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(10), HAFGRTR, AMEVTYPER110_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(9), HAFGRTR, AMEVTYPER19_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(8), HAFGRTR, AMEVTYPER18_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(7), HAFGRTR, AMEVTYPER17_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(6), HAFGRTR, AMEVTYPER16_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(5), HAFGRTR, AMEVTYPER15_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(4), HAFGRTR, AMEVTYPER14_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(3), HAFGRTR, AMEVTYPER13_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(2), HAFGRTR, AMEVTYPER12_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(1), HAFGRTR, AMEVTYPER11_EL0, 1), + SR_FGT(SYS_AMEVTYPER1_EL0(0), HAFGRTR, AMEVTYPER10_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(15), HAFGRTR, AMEVCNTR115_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(14), HAFGRTR, AMEVCNTR114_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(13), HAFGRTR, AMEVCNTR113_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(12), HAFGRTR, AMEVCNTR112_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(11), HAFGRTR, AMEVCNTR111_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(10), HAFGRTR, AMEVCNTR110_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(9), HAFGRTR, AMEVCNTR19_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(8), HAFGRTR, AMEVCNTR18_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(7), HAFGRTR, AMEVCNTR17_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(6), HAFGRTR, AMEVCNTR16_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(5), HAFGRTR, AMEVCNTR15_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(4), HAFGRTR, AMEVCNTR14_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(3), HAFGRTR, AMEVCNTR13_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(2), HAFGRTR, AMEVCNTR12_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(1), HAFGRTR, AMEVCNTR11_EL0, 1), + SR_FGT(SYS_AMEVCNTR1_EL0(0), HAFGRTR, AMEVCNTR10_EL0, 1), + SR_FGT(SYS_AMCNTENCLR1_EL0, HAFGRTR, AMCNTEN1, 1), + SR_FGT(SYS_AMCNTENSET1_EL0, HAFGRTR, AMCNTEN1, 1), + SR_FGT(SYS_AMCNTENCLR0_EL0, HAFGRTR, AMCNTEN0, 1), + SR_FGT(SYS_AMCNTENSET0_EL0, HAFGRTR, AMCNTEN0, 1), + SR_FGT(SYS_AMEVCNTR0_EL0(3), HAFGRTR, AMEVCNTR03_EL0, 1), + SR_FGT(SYS_AMEVCNTR0_EL0(2), HAFGRTR, AMEVCNTR02_EL0, 1), + SR_FGT(SYS_AMEVCNTR0_EL0(1), HAFGRTR, AMEVCNTR01_EL0, 1), + SR_FGT(SYS_AMEVCNTR0_EL0(0), HAFGRTR, AMEVCNTR00_EL0, 1), }; static union trap_config get_trap_config(u32 sysreg) @@ -1894,6 +1953,10 @@ bool __check_nv_sr_forward(struct kvm_vcpu *vcpu) val = sanitised_sys_reg(vcpu, HDFGWTR_EL2); break; + case HAFGRTR_GROUP: + val = sanitised_sys_reg(vcpu, HAFGRTR_EL2); + break; + case HFGITR_GROUP: val = sanitised_sys_reg(vcpu, HFGITR_EL2); switch (tc.fgf) { diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h index 9ddcfe2c3e..9e13c1bc2a 100644 --- a/arch/arm64/kvm/hyp/include/hyp/fault.h +++ b/arch/arm64/kvm/hyp/include/hyp/fault.h @@ -60,7 +60,7 @@ static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault) */ if (!(esr & ESR_ELx_S1PTW) && (cpus_have_final_cap(ARM64_WORKAROUND_834220) || - (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM)) { + esr_fsc_is_permission_fault(esr))) { if (!__translate_far_to_hpfar(far, &hpfar)) return false; } else { diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index f99d8af0b9..a038320cdb 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -79,6 +79,45 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu) clr |= ~hfg & __ ## reg ## _nMASK; \ } while(0) +#define update_fgt_traps_cs(vcpu, reg, clr, set) \ + do { \ + struct kvm_cpu_context *hctxt = \ + &this_cpu_ptr(&kvm_host_data)->host_ctxt; \ + u64 c = 0, s = 0; \ + \ + ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg); \ + compute_clr_set(vcpu, reg, c, s); \ + s |= set; \ + c |= clr; \ + if (c || s) { \ + u64 val = __ ## reg ## _nMASK; \ + val |= s; \ + val &= ~c; \ + write_sysreg_s(val, SYS_ ## reg); \ + } \ + } while(0) + +#define update_fgt_traps(vcpu, reg) \ + update_fgt_traps_cs(vcpu, reg, 0, 0) + +/* + * Validate the fine grain trap masks. + * Check that the masks do not overlap and that all bits are accounted for. + */ +#define CHECK_FGT_MASKS(reg) \ + do { \ + BUILD_BUG_ON((__ ## reg ## _MASK) & (__ ## reg ## _nMASK)); \ + BUILD_BUG_ON(~((__ ## reg ## _RES0) ^ (__ ## reg ## _MASK) ^ \ + (__ ## reg ## _nMASK))); \ + } while(0) + +static inline bool cpu_has_amu(void) +{ + u64 pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1); + + return cpuid_feature_extract_unsigned_field(pfr0, + ID_AA64PFR0_EL1_AMU_SHIFT); +} static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu) { @@ -86,6 +125,14 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu) u64 r_clr = 0, w_clr = 0, r_set = 0, w_set = 0, tmp; u64 r_val, w_val; + CHECK_FGT_MASKS(HFGRTR_EL2); + CHECK_FGT_MASKS(HFGWTR_EL2); + CHECK_FGT_MASKS(HFGITR_EL2); + CHECK_FGT_MASKS(HDFGRTR_EL2); + CHECK_FGT_MASKS(HDFGWTR_EL2); + CHECK_FGT_MASKS(HAFGRTR_EL2); + CHECK_FGT_MASKS(HCRX_EL2); + if (!cpus_have_final_cap(ARM64_HAS_FGT)) return; @@ -110,12 +157,15 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu) compute_clr_set(vcpu, HFGWTR_EL2, w_clr, w_set); } - /* The default is not to trap anything but ACCDATA_EL1 */ - r_val = __HFGRTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1; + /* The default to trap everything not handled or supported in KVM. */ + tmp = HFGxTR_EL2_nAMAIR2_EL1 | HFGxTR_EL2_nMAIR2_EL1 | HFGxTR_EL2_nS2POR_EL1 | + HFGxTR_EL2_nPOR_EL1 | HFGxTR_EL2_nPOR_EL0 | HFGxTR_EL2_nACCDATA_EL1; + + r_val = __HFGRTR_EL2_nMASK & ~tmp; r_val |= r_set; r_val &= ~r_clr; - w_val = __HFGWTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1; + w_val = __HFGWTR_EL2_nMASK & ~tmp; w_val |= w_set; w_val &= ~w_clr; @@ -125,34 +175,12 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu) if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu)) return; - ctxt_sys_reg(hctxt, HFGITR_EL2) = read_sysreg_s(SYS_HFGITR_EL2); + update_fgt_traps(vcpu, HFGITR_EL2); + update_fgt_traps(vcpu, HDFGRTR_EL2); + update_fgt_traps(vcpu, HDFGWTR_EL2); - r_set = r_clr = 0; - compute_clr_set(vcpu, HFGITR_EL2, r_clr, r_set); - r_val = __HFGITR_EL2_nMASK; - r_val |= r_set; - r_val &= ~r_clr; - - write_sysreg_s(r_val, SYS_HFGITR_EL2); - - ctxt_sys_reg(hctxt, HDFGRTR_EL2) = read_sysreg_s(SYS_HDFGRTR_EL2); - ctxt_sys_reg(hctxt, HDFGWTR_EL2) = read_sysreg_s(SYS_HDFGWTR_EL2); - - r_clr = r_set = w_clr = w_set = 0; - - compute_clr_set(vcpu, HDFGRTR_EL2, r_clr, r_set); - compute_clr_set(vcpu, HDFGWTR_EL2, w_clr, w_set); - - r_val = __HDFGRTR_EL2_nMASK; - r_val |= r_set; - r_val &= ~r_clr; - - w_val = __HDFGWTR_EL2_nMASK; - w_val |= w_set; - w_val &= ~w_clr; - - write_sysreg_s(r_val, SYS_HDFGRTR_EL2); - write_sysreg_s(w_val, SYS_HDFGWTR_EL2); + if (cpu_has_amu()) + update_fgt_traps(vcpu, HAFGRTR_EL2); } static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu) @@ -171,6 +199,9 @@ static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu) write_sysreg_s(ctxt_sys_reg(hctxt, HFGITR_EL2), SYS_HFGITR_EL2); write_sysreg_s(ctxt_sys_reg(hctxt, HDFGRTR_EL2), SYS_HDFGRTR_EL2); write_sysreg_s(ctxt_sys_reg(hctxt, HDFGWTR_EL2), SYS_HDFGWTR_EL2); + + if (cpu_has_amu()) + write_sysreg_s(ctxt_sys_reg(hctxt, HAFGRTR_EL2), SYS_HAFGRTR_EL2); } static inline void __activate_traps_common(struct kvm_vcpu *vcpu) @@ -591,7 +622,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) if (static_branch_unlikely(&vgic_v2_cpuif_trap)) { bool valid; - valid = kvm_vcpu_trap_get_fault_type(vcpu) == ESR_ELx_FSC_FAULT && + valid = kvm_vcpu_trap_is_translation_fault(vcpu) && kvm_vcpu_dabt_isvalid(vcpu) && !kvm_vcpu_abt_issea(vcpu) && !kvm_vcpu_abt_iss1tw(vcpu); diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h index e91922daa8..51f0436491 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h +++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h @@ -69,6 +69,8 @@ ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \ ) +#define PVM_ID_AA64PFR2_ALLOW 0ULL + /* * Allow for protected VMs: * - Mixed-endian @@ -101,6 +103,7 @@ * - Privileged Access Never * - SError interrupt exceptions from speculative reads * - Enhanced Translation Synchronization + * - Control for cache maintenance permission */ #define PVM_ID_AA64MMFR1_ALLOW (\ ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \ @@ -108,7 +111,8 @@ ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \ ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \ ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_CMOW) \ ) /* @@ -133,6 +137,8 @@ ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \ ) +#define PVM_ID_AA64MMFR3_ALLOW (0ULL) + /* * No support for Scalable Vectors for protected VMs: * Requires additional support from KVM, e.g., context-switching and @@ -178,10 +184,18 @@ ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RNDR) \ ) +/* Restrict pointer authentication to the basic version. */ +#define PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED (\ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA), ID_AA64ISAR1_EL1_APA_PAuth) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API), ID_AA64ISAR1_EL1_API_PAuth) \ + ) + +#define PVM_ID_AA64ISAR2_RESTRICT_UNSIGNED (\ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3), ID_AA64ISAR2_EL1_APA3_PAuth) \ + ) + #define PVM_ID_AA64ISAR1_ALLOW (\ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) | \ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \ ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \ @@ -196,8 +210,8 @@ ) #define PVM_ID_AA64ISAR2_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_ATS1A)| \ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) | \ ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS) \ ) diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h index fe5472a184..97c527ef53 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h +++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h @@ -16,7 +16,7 @@ struct hyp_pool { * API at EL2. */ hyp_spinlock_t lock; - struct list_head free_area[MAX_ORDER + 1]; + struct list_head free_area[NR_PAGE_ORDERS]; phys_addr_t range_start; phys_addr_t range_end; unsigned short max_order; diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S index 1cc06e6797..2994878d68 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S +++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S @@ -122,11 +122,7 @@ alternative_if ARM64_HAS_CNP alternative_else_nop_endif msr ttbr0_el2, x2 - /* - * Set the PS bits in TCR_EL2. - */ ldr x0, [x0, #NVHE_INIT_TCR_EL2] - tcr_compute_pa_size x0, #TCR_EL2_PS_SHIFT, x1, x2 msr tcr_el2, x0 isb @@ -292,6 +288,8 @@ alternative_else_nop_endif mov sp, x0 /* And turn the MMU back on! */ + dsb nsh + isb set_sctlr_el2 x2 ret x1 SYM_FUNC_END(__pkvm_init_switch_pgd) diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index 8d0a5834e8..861c76021a 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -91,7 +91,7 @@ static void host_s2_put_page(void *addr) hyp_put_page(&host_s2_pool, addr); } -static void host_s2_free_unlinked_table(void *addr, u32 level) +static void host_s2_free_unlinked_table(void *addr, s8 level) { kvm_pgtable_stage2_free_unlinked(&host_mmu.mm_ops, addr, level); } @@ -443,7 +443,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range) { struct kvm_mem_range cur; kvm_pte_t pte; - u32 level; + s8 level; int ret; hyp_assert_lock_held(&host_mmu.lock); @@ -462,7 +462,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range) cur.start = ALIGN_DOWN(addr, granule); cur.end = cur.start + granule; level++; - } while ((level < KVM_PGTABLE_MAX_LEVELS) && + } while ((level <= KVM_PGTABLE_LAST_LEVEL) && !(kvm_level_supports_block_mapping(level) && range_included(&cur, range))); diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c index 65a7a186d7..b01a3d1078 100644 --- a/arch/arm64/kvm/hyp/nvhe/mm.c +++ b/arch/arm64/kvm/hyp/nvhe/mm.c @@ -260,7 +260,7 @@ static void fixmap_clear_slot(struct hyp_fixmap_slot *slot) * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03 */ dsb(ishst); - __tlbi_level(vale2is, __TLBI_VADDR(addr, 0), (KVM_PGTABLE_MAX_LEVELS - 1)); + __tlbi_level(vale2is, __TLBI_VADDR(addr, 0), KVM_PGTABLE_LAST_LEVEL); dsb(ish); isb(); } @@ -275,7 +275,7 @@ static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx, { struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg); - if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_MAX_LEVELS - 1) + if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_LAST_LEVEL) return -EINVAL; slot->addr = ctx->addr; diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c index b1e392186a..e691290d37 100644 --- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c +++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c @@ -228,7 +228,8 @@ int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages, int i; hyp_spin_lock_init(&pool->lock); - pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT)); + pool->max_order = min(MAX_PAGE_ORDER, + get_order(nr_pages << PAGE_SHIFT)); for (i = 0; i <= pool->max_order; i++) INIT_LIST_HEAD(&pool->free_area[i]); pool->range_start = phys; diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c index 9d23a51d7f..26dd9a20ad 100644 --- a/arch/arm64/kvm/hyp/nvhe/pkvm.c +++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c @@ -12,7 +12,7 @@ #include <nvhe/pkvm.h> #include <nvhe/trap_handler.h> -/* Used by icache_is_vpipt(). */ +/* Used by icache_is_aliasing(). */ unsigned long __icache_flags; /* Used by kvm_get_vttbr(). */ @@ -136,6 +136,10 @@ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu) cptr_set |= CPTR_EL2_TTA; } + /* Trap External Trace */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_ExtTrcBuff), feature_ids)) + mdcr_clear |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT; + vcpu->arch.mdcr_el2 |= mdcr_set; vcpu->arch.mdcr_el2 &= ~mdcr_clear; vcpu->arch.cptr_el2 |= cptr_set; diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c index 0d5e0a89dd..bc58d1b515 100644 --- a/arch/arm64/kvm/hyp/nvhe/setup.c +++ b/arch/arm64/kvm/hyp/nvhe/setup.c @@ -181,7 +181,7 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx, if (!kvm_pte_valid(ctx->old)) return 0; - if (ctx->level != (KVM_PGTABLE_MAX_LEVELS - 1)) + if (ctx->level != KVM_PGTABLE_LAST_LEVEL) return -EINVAL; phys = kvm_pte_to_phys(ctx->old); diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c index 1b265713d6..2fc68da403 100644 --- a/arch/arm64/kvm/hyp/nvhe/tlb.c +++ b/arch/arm64/kvm/hyp/nvhe/tlb.c @@ -105,28 +105,6 @@ void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu, dsb(ish); isb(); - /* - * If the host is running at EL1 and we have a VPIPT I-cache, - * then we must perform I-cache maintenance at EL2 in order for - * it to have an effect on the guest. Since the guest cannot hit - * I-cache lines allocated with a different VMID, we don't need - * to worry about junk out of guest reset (we nuke the I-cache on - * VMID rollover), but we do need to be careful when remapping - * executable pages for the same guest. This can happen when KSM - * takes a CoW fault on an executable page, copies the page into - * a page that was previously mapped in the guest and then needs - * to invalidate the guest view of the I-cache for that page - * from EL1. To solve this, we invalidate the entire I-cache when - * unmapping a page from a guest if we have a VPIPT I-cache but - * the host is running at EL1. As above, we could do better if - * we had the VA. - * - * The moral of this story is: if you have a VPIPT I-cache, then - * you should be running with VHE enabled. - */ - if (icache_is_vpipt()) - icache_inval_all_pou(); - __tlb_switch_to_host(&cxt); } @@ -157,28 +135,6 @@ void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu, dsb(nsh); isb(); - /* - * If the host is running at EL1 and we have a VPIPT I-cache, - * then we must perform I-cache maintenance at EL2 in order for - * it to have an effect on the guest. Since the guest cannot hit - * I-cache lines allocated with a different VMID, we don't need - * to worry about junk out of guest reset (we nuke the I-cache on - * VMID rollover), but we do need to be careful when remapping - * executable pages for the same guest. This can happen when KSM - * takes a CoW fault on an executable page, copies the page into - * a page that was previously mapped in the guest and then needs - * to invalidate the guest view of the I-cache for that page - * from EL1. To solve this, we invalidate the entire I-cache when - * unmapping a page from a guest if we have a VPIPT I-cache but - * the host is running at EL1. As above, we could do better if - * we had the VA. - * - * The moral of this story is: if you have a VPIPT I-cache, then - * you should be running with VHE enabled. - */ - if (icache_is_vpipt()) - icache_inval_all_pou(); - __tlb_switch_to_host(&cxt); } @@ -198,17 +154,14 @@ void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu, /* Switch to requested VMID */ __tlb_switch_to_guest(mmu, &cxt, false); - __flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, 0); + __flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, + TLBI_TTL_UNKNOWN); dsb(ish); __tlbi(vmalle1is); dsb(ish); isb(); - /* See the comment in __kvm_tlb_flush_vmid_ipa() */ - if (icache_is_vpipt()) - icache_inval_all_pou(); - __tlb_switch_to_host(&cxt); } @@ -246,18 +199,5 @@ void __kvm_flush_vm_context(void) /* Same remark as in __tlb_switch_to_guest() */ dsb(ish); __tlbi(alle1is); - - /* - * VIPT and PIPT caches are not affected by VMID, so no maintenance - * is necessary across a VMID rollover. - * - * VPIPT caches constrain lookup and maintenance to the active VMID, - * so we need to invalidate lines with a stale VMID to avoid an ABA - * race after multiple rollovers. - * - */ - if (icache_is_vpipt()) - asm volatile("ic ialluis"); - dsb(ish); } diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index 1966fdee74..ce5cef7d73 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -79,7 +79,10 @@ static bool kvm_pgtable_walk_skip_cmo(const struct kvm_pgtable_visit_ctx *ctx) static bool kvm_phys_is_valid(u64 phys) { - return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_EL1_PARANGE_MAX)); + u64 parange_max = kvm_get_parange_max(); + u8 shift = id_aa64mmfr0_parange_to_phys_shift(parange_max); + + return phys < BIT(shift); } static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, u64 phys) @@ -98,7 +101,7 @@ static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, return IS_ALIGNED(ctx->addr, granule); } -static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, u32 level) +static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, s8 level) { u64 shift = kvm_granule_shift(level); u64 mask = BIT(PAGE_SHIFT - 3) - 1; @@ -114,7 +117,7 @@ static u32 kvm_pgd_page_idx(struct kvm_pgtable *pgt, u64 addr) return (addr & mask) >> shift; } -static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level) +static u32 kvm_pgd_pages(u32 ia_bits, s8 start_level) { struct kvm_pgtable pgt = { .ia_bits = ia_bits, @@ -124,9 +127,9 @@ static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level) return kvm_pgd_page_idx(&pgt, -1ULL) + 1; } -static bool kvm_pte_table(kvm_pte_t pte, u32 level) +static bool kvm_pte_table(kvm_pte_t pte, s8 level) { - if (level == KVM_PGTABLE_MAX_LEVELS - 1) + if (level == KVM_PGTABLE_LAST_LEVEL) return false; if (!kvm_pte_valid(pte)) @@ -154,11 +157,11 @@ static kvm_pte_t kvm_init_table_pte(kvm_pte_t *childp, struct kvm_pgtable_mm_ops return pte; } -static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32 level) +static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, s8 level) { kvm_pte_t pte = kvm_phys_to_pte(pa); - u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE : - KVM_PTE_TYPE_BLOCK; + u64 type = (level == KVM_PGTABLE_LAST_LEVEL) ? KVM_PTE_TYPE_PAGE : + KVM_PTE_TYPE_BLOCK; pte |= attr & (KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI); pte |= FIELD_PREP(KVM_PTE_TYPE, type); @@ -203,11 +206,11 @@ static bool kvm_pgtable_walk_continue(const struct kvm_pgtable_walker *walker, } static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data, - struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level); + struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level); static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data, struct kvm_pgtable_mm_ops *mm_ops, - kvm_pteref_t pteref, u32 level) + kvm_pteref_t pteref, s8 level) { enum kvm_pgtable_walk_flags flags = data->walker->flags; kvm_pte_t *ptep = kvm_dereference_pteref(data->walker, pteref); @@ -272,12 +275,13 @@ out: } static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data, - struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level) + struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level) { u32 idx; int ret = 0; - if (WARN_ON_ONCE(level >= KVM_PGTABLE_MAX_LEVELS)) + if (WARN_ON_ONCE(level < KVM_PGTABLE_FIRST_LEVEL || + level > KVM_PGTABLE_LAST_LEVEL)) return -EINVAL; for (idx = kvm_pgtable_idx(data, level); idx < PTRS_PER_PTE; ++idx) { @@ -340,7 +344,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size, struct leaf_walk_data { kvm_pte_t pte; - u32 level; + s8 level; }; static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx, @@ -355,7 +359,7 @@ static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx, } int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr, - kvm_pte_t *ptep, u32 *level) + kvm_pte_t *ptep, s8 *level) { struct leaf_walk_data data; struct kvm_pgtable_walker walker = { @@ -408,7 +412,8 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep) } attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap); - attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh); + if (!kvm_lpa2_is_enabled()) + attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh); attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF; attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW; *ptep = attr; @@ -467,7 +472,7 @@ static int hyp_map_walker(const struct kvm_pgtable_visit_ctx *ctx, if (hyp_map_walker_try_leaf(ctx, data)) return 0; - if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1)) + if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL)) return -EINVAL; childp = (kvm_pte_t *)mm_ops->zalloc_page(NULL); @@ -563,14 +568,19 @@ u64 kvm_pgtable_hyp_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size) int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits, struct kvm_pgtable_mm_ops *mm_ops) { - u64 levels = ARM64_HW_PGTABLE_LEVELS(va_bits); + s8 start_level = KVM_PGTABLE_LAST_LEVEL + 1 - + ARM64_HW_PGTABLE_LEVELS(va_bits); + + if (start_level < KVM_PGTABLE_FIRST_LEVEL || + start_level > KVM_PGTABLE_LAST_LEVEL) + return -EINVAL; pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_page(NULL); if (!pgt->pgd) return -ENOMEM; pgt->ia_bits = va_bits; - pgt->start_level = KVM_PGTABLE_MAX_LEVELS - levels; + pgt->start_level = start_level; pgt->mm_ops = mm_ops; pgt->mmu = NULL; pgt->force_pte_cb = NULL; @@ -624,7 +634,7 @@ struct stage2_map_data { u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift) { u64 vtcr = VTCR_EL2_FLAGS; - u8 lvls; + s8 lvls; vtcr |= kvm_get_parange(mmfr0) << VTCR_EL2_PS_SHIFT; vtcr |= VTCR_EL2_T0SZ(phys_shift); @@ -635,6 +645,15 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift) lvls = stage2_pgtable_levels(phys_shift); if (lvls < 2) lvls = 2; + + /* + * When LPA2 is enabled, the HW supports an extra level of translation + * (for 5 in total) when using 4K pages. It also introduces VTCR_EL2.SL2 + * to as an addition to SL0 to enable encoding this extra start level. + * However, since we always use concatenated pages for the first level + * lookup, we will never need this extra level and therefore do not need + * to touch SL2. + */ vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls); #ifdef CONFIG_ARM64_HW_AFDBM @@ -654,6 +673,9 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift) vtcr |= VTCR_EL2_HA; #endif /* CONFIG_ARM64_HW_AFDBM */ + if (kvm_lpa2_is_enabled()) + vtcr |= VTCR_EL2_DS; + /* Set the vmid bits */ vtcr |= (get_vmid_bits(mmfr1) == 16) ? VTCR_EL2_VS_16BIT : @@ -711,7 +733,9 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p if (prot & KVM_PGTABLE_PROT_W) attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W; - attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh); + if (!kvm_lpa2_is_enabled()) + attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh); + attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF; attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW; *ptep = attr; @@ -805,12 +829,15 @@ static bool stage2_try_break_pte(const struct kvm_pgtable_visit_ctx *ctx, * Perform the appropriate TLB invalidation based on the * evicted pte value (if any). */ - if (kvm_pte_table(ctx->old, ctx->level)) - kvm_tlb_flush_vmid_range(mmu, ctx->addr, - kvm_granule_size(ctx->level)); - else if (kvm_pte_valid(ctx->old)) + if (kvm_pte_table(ctx->old, ctx->level)) { + u64 size = kvm_granule_size(ctx->level); + u64 addr = ALIGN_DOWN(ctx->addr, size); + + kvm_tlb_flush_vmid_range(mmu, addr, size); + } else if (kvm_pte_valid(ctx->old)) { kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu, ctx->addr, ctx->level); + } } if (stage2_pte_is_counted(ctx->old)) @@ -902,7 +929,7 @@ static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx, { u64 phys = stage2_map_walker_phys_addr(ctx, data); - if (data->force_pte && (ctx->level < (KVM_PGTABLE_MAX_LEVELS - 1))) + if (data->force_pte && ctx->level < KVM_PGTABLE_LAST_LEVEL) return false; return kvm_block_mapping_supported(ctx, phys); @@ -981,7 +1008,7 @@ static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx, if (ret != -E2BIG) return ret; - if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1)) + if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL)) return -EINVAL; if (!data->memcache) @@ -1151,7 +1178,7 @@ struct stage2_attr_data { kvm_pte_t attr_set; kvm_pte_t attr_clr; kvm_pte_t pte; - u32 level; + s8 level; }; static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx, @@ -1194,7 +1221,7 @@ static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx, static int stage2_update_leaf_attrs(struct kvm_pgtable *pgt, u64 addr, u64 size, kvm_pte_t attr_set, kvm_pte_t attr_clr, kvm_pte_t *orig_pte, - u32 *level, enum kvm_pgtable_walk_flags flags) + s8 *level, enum kvm_pgtable_walk_flags flags) { int ret; kvm_pte_t attr_mask = KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI; @@ -1296,7 +1323,7 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr, enum kvm_pgtable_prot prot) { int ret; - u32 level; + s8 level; kvm_pte_t set = 0, clr = 0; if (prot & KVM_PTE_LEAF_ATTR_HI_SW) @@ -1349,7 +1376,7 @@ int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size) } kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt, - u64 phys, u32 level, + u64 phys, s8 level, enum kvm_pgtable_prot prot, void *mc, bool force_pte) { @@ -1395,7 +1422,6 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt, level + 1); if (ret) { kvm_pgtable_stage2_free_unlinked(mm_ops, pgtable, level); - mm_ops->put_page(pgtable); return ERR_PTR(ret); } @@ -1407,7 +1433,7 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt, * fully populated tree up to the PTE entries. Note that @level is * interpreted as in "level @level entry". */ -static int stage2_block_get_nr_page_tables(u32 level) +static int stage2_block_get_nr_page_tables(s8 level) { switch (level) { case 1: @@ -1418,7 +1444,7 @@ static int stage2_block_get_nr_page_tables(u32 level) return 0; default: WARN_ON_ONCE(level < KVM_PGTABLE_MIN_BLOCK_LEVEL || - level >= KVM_PGTABLE_MAX_LEVELS); + level > KVM_PGTABLE_LAST_LEVEL); return -EINVAL; }; } @@ -1431,13 +1457,13 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx, struct kvm_s2_mmu *mmu; kvm_pte_t pte = ctx->old, new, *childp; enum kvm_pgtable_prot prot; - u32 level = ctx->level; + s8 level = ctx->level; bool force_pte; int nr_pages; u64 phys; /* No huge-pages exist at the last level */ - if (level == KVM_PGTABLE_MAX_LEVELS - 1) + if (level == KVM_PGTABLE_LAST_LEVEL) return 0; /* We only split valid block mappings */ @@ -1478,7 +1504,6 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx, if (!stage2_try_break_pte(ctx, mmu)) { kvm_pgtable_stage2_free_unlinked(mm_ops, childp, level); - mm_ops->put_page(childp); return -EAGAIN; } @@ -1514,7 +1539,7 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu, u64 vtcr = mmu->vtcr; u32 ia_bits = VTCR_EL2_IPA(vtcr); u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr); - u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0; + s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0; pgd_sz = kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE; pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_pages_exact(pgd_sz); @@ -1537,7 +1562,7 @@ size_t kvm_pgtable_stage2_pgd_size(u64 vtcr) { u32 ia_bits = VTCR_EL2_IPA(vtcr); u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr); - u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0; + s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0; return kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE; } @@ -1573,7 +1598,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt) pgt->pgd = NULL; } -void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level) +void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level) { kvm_pteref_t ptep = (kvm_pteref_t)pgtable; struct kvm_pgtable_walker walker = { diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c index b636b4111d..1a60b95381 100644 --- a/arch/arm64/kvm/hyp/vhe/tlb.c +++ b/arch/arm64/kvm/hyp/vhe/tlb.c @@ -171,7 +171,8 @@ void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu, /* Switch to requested VMID */ __tlb_switch_to_guest(mmu, &cxt); - __flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, 0); + __flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, + TLBI_TTL_UNKNOWN); dsb(ish); __tlbi(vmalle1is); @@ -216,18 +217,5 @@ void __kvm_flush_vm_context(void) { dsb(ishst); __tlbi(alle1is); - - /* - * VIPT and PIPT caches are not affected by VMID, so no maintenance - * is necessary across a VMID rollover. - * - * VPIPT caches constrain lookup and maintenance to the active VMID, - * so we need to invalidate lines with a stale VMID to avoid an ABA - * race after multiple rollovers. - * - */ - if (icache_is_vpipt()) - asm volatile("ic ialluis"); - dsb(ish); } diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index d87c8fcc4c..92270acfc0 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -223,12 +223,12 @@ static void stage2_free_unlinked_table_rcu_cb(struct rcu_head *head) { struct page *page = container_of(head, struct page, rcu_head); void *pgtable = page_to_virt(page); - u32 level = page_private(page); + s8 level = page_private(page); kvm_pgtable_stage2_free_unlinked(&kvm_s2_mm_ops, pgtable, level); } -static void stage2_free_unlinked_table(void *addr, u32 level) +static void stage2_free_unlinked_table(void *addr, s8 level) { struct page *page = virt_to_page(addr); @@ -804,13 +804,13 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr) struct kvm_pgtable pgt = { .pgd = (kvm_pteref_t)kvm->mm->pgd, .ia_bits = vabits_actual, - .start_level = (KVM_PGTABLE_MAX_LEVELS - - CONFIG_PGTABLE_LEVELS), + .start_level = (KVM_PGTABLE_LAST_LEVEL - + CONFIG_PGTABLE_LEVELS + 1), .mm_ops = &kvm_user_mm_ops, }; unsigned long flags; kvm_pte_t pte = 0; /* Keep GCC quiet... */ - u32 level = ~0; + s8 level = S8_MAX; int ret; /* @@ -829,7 +829,9 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr) * Not seeing an error, but not updating level? Something went * deeply wrong... */ - if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS)) + if (WARN_ON(level > KVM_PGTABLE_LAST_LEVEL)) + return -EFAULT; + if (WARN_ON(level < KVM_PGTABLE_FIRST_LEVEL)) return -EFAULT; /* Oops, the userspace PTs are gone... Replay the fault */ @@ -1374,7 +1376,7 @@ static bool kvm_vma_mte_allowed(struct vm_area_struct *vma) static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm_memory_slot *memslot, unsigned long hva, - unsigned long fault_status) + bool fault_is_perm) { int ret = 0; bool write_fault, writable, force_pte = false; @@ -1388,17 +1390,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, gfn_t gfn; kvm_pfn_t pfn; bool logging_active = memslot_is_logging(memslot); - unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu); long vma_pagesize, fault_granule; enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R; struct kvm_pgtable *pgt; - fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level); + if (fault_is_perm) + fault_granule = kvm_vcpu_trap_get_perm_fault_granule(vcpu); write_fault = kvm_is_write_fault(vcpu); exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu); VM_BUG_ON(write_fault && exec_fault); - if (fault_status == ESR_ELx_FSC_PERM && !write_fault && !exec_fault) { + if (fault_is_perm && !write_fault && !exec_fault) { kvm_err("Unexpected L2 read permission error\n"); return -EFAULT; } @@ -1409,8 +1411,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * only exception to this is when dirty logging is enabled at runtime * and a write fault needs to collapse a block entry into a table. */ - if (fault_status != ESR_ELx_FSC_PERM || - (logging_active && write_fault)) { + if (!fault_is_perm || (logging_active && write_fault)) { ret = kvm_mmu_topup_memory_cache(memcache, kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu)); if (ret) @@ -1527,8 +1528,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * backed by a THP and thus use block mapping if possible. */ if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) { - if (fault_status == ESR_ELx_FSC_PERM && - fault_granule > PAGE_SIZE) + if (fault_is_perm && fault_granule > PAGE_SIZE) vma_pagesize = fault_granule; else vma_pagesize = transparent_hugepage_adjust(kvm, memslot, @@ -1541,7 +1541,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, } } - if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) { + if (!fault_is_perm && !device && kvm_has_mte(kvm)) { /* Check the VMM hasn't introduced a new disallowed VMA */ if (mte_allowed) { sanitise_mte_tags(kvm, pfn, vma_pagesize); @@ -1567,7 +1567,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * permissions only if vma_pagesize equals fault_granule. Otherwise, * kvm_pgtable_stage2_map() should be called to change block size. */ - if (fault_status == ESR_ELx_FSC_PERM && vma_pagesize == fault_granule) + if (fault_is_perm && vma_pagesize == fault_granule) ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot); else ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize, @@ -1618,7 +1618,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa) */ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) { - unsigned long fault_status; + unsigned long esr; phys_addr_t fault_ipa; struct kvm_memory_slot *memslot; unsigned long hva; @@ -1626,12 +1626,12 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) gfn_t gfn; int ret, idx; - fault_status = kvm_vcpu_trap_get_fault_type(vcpu); + esr = kvm_vcpu_get_esr(vcpu); fault_ipa = kvm_vcpu_get_fault_ipa(vcpu); is_iabt = kvm_vcpu_trap_is_iabt(vcpu); - if (fault_status == ESR_ELx_FSC_FAULT) { + if (esr_fsc_is_translation_fault(esr)) { /* Beyond sanitised PARange (which is the IPA limit) */ if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) { kvm_inject_size_fault(vcpu); @@ -1666,9 +1666,9 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) kvm_vcpu_get_hfar(vcpu), fault_ipa); /* Check the stage-2 fault is trans. fault or write fault */ - if (fault_status != ESR_ELx_FSC_FAULT && - fault_status != ESR_ELx_FSC_PERM && - fault_status != ESR_ELx_FSC_ACCESS) { + if (!esr_fsc_is_translation_fault(esr) && + !esr_fsc_is_permission_fault(esr) && + !esr_fsc_is_access_flag_fault(esr)) { kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n", kvm_vcpu_trap_get_class(vcpu), (unsigned long)kvm_vcpu_trap_get_fault(vcpu), @@ -1730,13 +1730,14 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu) /* Userspace should not be able to register out-of-bounds IPAs */ VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->arch.hw_mmu)); - if (fault_status == ESR_ELx_FSC_ACCESS) { + if (esr_fsc_is_access_flag_fault(esr)) { handle_access_fault(vcpu, fault_ipa); ret = 1; goto out_unlock; } - ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status); + ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, + esr_fsc_is_permission_fault(esr)); if (ret == 0) ret = 1; out: diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c index 042695a210..ba95d044bc 100644 --- a/arch/arm64/kvm/nested.c +++ b/arch/arm64/kvm/nested.c @@ -23,13 +23,9 @@ * This list should get updated as new features get added to the NV * support, and new extension to the architecture. */ -void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p, - const struct sys_reg_desc *r) +static u64 limit_nv_id_reg(u32 id, u64 val) { - u32 id = reg_to_encoding(r); - u64 val, tmp; - - val = p->regval; + u64 tmp; switch (id) { case SYS_ID_AA64ISAR0_EL1: @@ -158,5 +154,17 @@ void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p, break; } - p->regval = val; + return val; +} +int kvm_init_nv_sysregs(struct kvm *kvm) +{ + mutex_lock(&kvm->arch.config_lock); + + for (int i = 0; i < KVM_ARM_ID_REG_NUM; i++) + kvm->arch.id_regs[i] = limit_nv_id_reg(IDX_IDREG(i), + kvm->arch.id_regs[i]); + + mutex_unlock(&kvm->arch.config_lock); + + return 0; } diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index fe99b3dab6..3d9467ff73 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -267,9 +267,8 @@ void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu) u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu) { - u64 val = kvm_vcpu_read_pmcr(vcpu) >> ARMV8_PMU_PMCR_N_SHIFT; + u64 val = FIELD_GET(ARMV8_PMU_PMCR_N, kvm_vcpu_read_pmcr(vcpu)); - val &= ARMV8_PMU_PMCR_N_MASK; if (val == 0) return BIT(ARMV8_PMU_CYCLE_IDX); else @@ -1136,8 +1135,7 @@ u8 kvm_arm_pmu_get_pmuver_limit(void) */ u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu) { - u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0) & - ~(ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT); + u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0); - return pmcr | ((u64)vcpu->kvm->arch.pmcr_n << ARMV8_PMU_PMCR_N_SHIFT); + return u64_replace_bits(pmcr, vcpu->kvm->arch.pmcr_n, ARMV8_PMU_PMCR_N); } diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index 5bb4de162c..68d1d05672 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -280,12 +280,11 @@ int __init kvm_set_ipa_limit(void) parange = cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT); /* - * IPA size beyond 48 bits could not be supported - * on either 4K or 16K page size. Hence let's cap - * it to 48 bits, in case it's reported as larger - * on the system. + * IPA size beyond 48 bits for 4K and 16K page size is only supported + * when LPA2 is available. So if we have LPA2, enable it, else cap to 48 + * bits, in case it's reported as larger on the system. */ - if (PAGE_SIZE != SZ_64K) + if (!kvm_lpa2_is_enabled() && PAGE_SIZE != SZ_64K) parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48); /* diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 4735e1b37f..30253bd199 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -45,44 +45,170 @@ static u64 sys_reg_to_index(const struct sys_reg_desc *reg); static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, u64 val); -static bool read_from_write_only(struct kvm_vcpu *vcpu, - struct sys_reg_params *params, - const struct sys_reg_desc *r) +static bool bad_trap(struct kvm_vcpu *vcpu, + struct sys_reg_params *params, + const struct sys_reg_desc *r, + const char *msg) { - WARN_ONCE(1, "Unexpected sys_reg read to write-only register\n"); + WARN_ONCE(1, "Unexpected %s\n", msg); print_sys_reg_instr(params); kvm_inject_undefined(vcpu); return false; } +static bool read_from_write_only(struct kvm_vcpu *vcpu, + struct sys_reg_params *params, + const struct sys_reg_desc *r) +{ + return bad_trap(vcpu, params, r, + "sys_reg read to write-only register"); +} + static bool write_to_read_only(struct kvm_vcpu *vcpu, struct sys_reg_params *params, const struct sys_reg_desc *r) { - WARN_ONCE(1, "Unexpected sys_reg write to read-only register\n"); - print_sys_reg_instr(params); - kvm_inject_undefined(vcpu); - return false; + return bad_trap(vcpu, params, r, + "sys_reg write to read-only register"); +} + +#define PURE_EL2_SYSREG(el2) \ + case el2: { \ + *el1r = el2; \ + return true; \ + } + +#define MAPPED_EL2_SYSREG(el2, el1, fn) \ + case el2: { \ + *xlate = fn; \ + *el1r = el1; \ + return true; \ + } + +static bool get_el2_to_el1_mapping(unsigned int reg, + unsigned int *el1r, u64 (**xlate)(u64)) +{ + switch (reg) { + PURE_EL2_SYSREG( VPIDR_EL2 ); + PURE_EL2_SYSREG( VMPIDR_EL2 ); + PURE_EL2_SYSREG( ACTLR_EL2 ); + PURE_EL2_SYSREG( HCR_EL2 ); + PURE_EL2_SYSREG( MDCR_EL2 ); + PURE_EL2_SYSREG( HSTR_EL2 ); + PURE_EL2_SYSREG( HACR_EL2 ); + PURE_EL2_SYSREG( VTTBR_EL2 ); + PURE_EL2_SYSREG( VTCR_EL2 ); + PURE_EL2_SYSREG( RVBAR_EL2 ); + PURE_EL2_SYSREG( TPIDR_EL2 ); + PURE_EL2_SYSREG( HPFAR_EL2 ); + PURE_EL2_SYSREG( CNTHCTL_EL2 ); + MAPPED_EL2_SYSREG(SCTLR_EL2, SCTLR_EL1, + translate_sctlr_el2_to_sctlr_el1 ); + MAPPED_EL2_SYSREG(CPTR_EL2, CPACR_EL1, + translate_cptr_el2_to_cpacr_el1 ); + MAPPED_EL2_SYSREG(TTBR0_EL2, TTBR0_EL1, + translate_ttbr0_el2_to_ttbr0_el1 ); + MAPPED_EL2_SYSREG(TTBR1_EL2, TTBR1_EL1, NULL ); + MAPPED_EL2_SYSREG(TCR_EL2, TCR_EL1, + translate_tcr_el2_to_tcr_el1 ); + MAPPED_EL2_SYSREG(VBAR_EL2, VBAR_EL1, NULL ); + MAPPED_EL2_SYSREG(AFSR0_EL2, AFSR0_EL1, NULL ); + MAPPED_EL2_SYSREG(AFSR1_EL2, AFSR1_EL1, NULL ); + MAPPED_EL2_SYSREG(ESR_EL2, ESR_EL1, NULL ); + MAPPED_EL2_SYSREG(FAR_EL2, FAR_EL1, NULL ); + MAPPED_EL2_SYSREG(MAIR_EL2, MAIR_EL1, NULL ); + MAPPED_EL2_SYSREG(AMAIR_EL2, AMAIR_EL1, NULL ); + MAPPED_EL2_SYSREG(ELR_EL2, ELR_EL1, NULL ); + MAPPED_EL2_SYSREG(SPSR_EL2, SPSR_EL1, NULL ); + default: + return false; + } } u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg) { u64 val = 0x8badf00d8badf00d; + u64 (*xlate)(u64) = NULL; + unsigned int el1r; + + if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU)) + goto memory_read; - if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) && - __vcpu_read_sys_reg_from_cpu(reg, &val)) + if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) { + if (!is_hyp_ctxt(vcpu)) + goto memory_read; + + /* + * If this register does not have an EL1 counterpart, + * then read the stored EL2 version. + */ + if (reg == el1r) + goto memory_read; + + /* + * If we have a non-VHE guest and that the sysreg + * requires translation to be used at EL1, use the + * in-memory copy instead. + */ + if (!vcpu_el2_e2h_is_set(vcpu) && xlate) + goto memory_read; + + /* Get the current version of the EL1 counterpart. */ + WARN_ON(!__vcpu_read_sys_reg_from_cpu(el1r, &val)); return val; + } + /* EL1 register can't be on the CPU if the guest is in vEL2. */ + if (unlikely(is_hyp_ctxt(vcpu))) + goto memory_read; + + if (__vcpu_read_sys_reg_from_cpu(reg, &val)) + return val; + +memory_read: return __vcpu_sys_reg(vcpu, reg); } void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg) { - if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) && - __vcpu_write_sys_reg_to_cpu(val, reg)) + u64 (*xlate)(u64) = NULL; + unsigned int el1r; + + if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU)) + goto memory_write; + + if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) { + if (!is_hyp_ctxt(vcpu)) + goto memory_write; + + /* + * Always store a copy of the write to memory to avoid having + * to reverse-translate virtual EL2 system registers for a + * non-VHE guest hypervisor. + */ + __vcpu_sys_reg(vcpu, reg) = val; + + /* No EL1 counterpart? We're done here.? */ + if (reg == el1r) + return; + + if (!vcpu_el2_e2h_is_set(vcpu) && xlate) + val = xlate(val); + + /* Redirect this to the EL1 version of the register. */ + WARN_ON(!__vcpu_write_sys_reg_to_cpu(val, el1r)); + return; + } + + /* EL1 register can't be on the CPU if the guest is in vEL2. */ + if (unlikely(is_hyp_ctxt(vcpu))) + goto memory_write; + + if (__vcpu_write_sys_reg_to_cpu(val, reg)) return; - __vcpu_sys_reg(vcpu, reg) = val; +memory_write: + __vcpu_sys_reg(vcpu, reg) = val; } /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */ @@ -877,7 +1003,7 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx) u64 pmcr, val; pmcr = kvm_vcpu_read_pmcr(vcpu); - val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK; + val = FIELD_GET(ARMV8_PMU_PMCR_N, pmcr); if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) { kvm_inject_undefined(vcpu); return false; @@ -1143,7 +1269,7 @@ static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 val) { - u8 new_n = (val >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK; + u8 new_n = FIELD_GET(ARMV8_PMU_PMCR_N, val); struct kvm *kvm = vcpu->kvm; mutex_lock(&kvm->arch.config_lock); @@ -1505,8 +1631,6 @@ static bool access_id_reg(struct kvm_vcpu *vcpu, return write_to_read_only(vcpu, p, r); p->regval = read_id_reg(vcpu, r); - if (vcpu_has_nv(vcpu)) - access_nested_id_reg(vcpu, p, r); return true; } @@ -1885,6 +2009,32 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu, return REG_HIDDEN; } +static bool bad_vncr_trap(struct kvm_vcpu *vcpu, + struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + /* + * We really shouldn't be here, and this is likely the result + * of a misconfigured trap, as this register should target the + * VNCR page, and nothing else. + */ + return bad_trap(vcpu, p, r, + "trap of VNCR-backed register"); +} + +static bool bad_redir_trap(struct kvm_vcpu *vcpu, + struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + /* + * We really shouldn't be here, and this is likely the result + * of a misconfigured trap, as this register should target the + * corresponding EL1, and nothing else. + */ + return bad_trap(vcpu, p, r, + "trap of EL2 register redirected to EL1"); +} + #define EL2_REG(name, acc, rst, v) { \ SYS_DESC(SYS_##name), \ .access = acc, \ @@ -1894,6 +2044,9 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu, .val = v, \ } +#define EL2_REG_VNCR(name, rst, v) EL2_REG(name, bad_vncr_trap, rst, v) +#define EL2_REG_REDIR(name, rst, v) EL2_REG(name, bad_redir_trap, rst, v) + /* * EL{0,1}2 registers are the EL2 view on an EL0 or EL1 register when * HCR_EL2.E2H==1, and only in the sysreg table for convenience of @@ -2508,32 +2661,33 @@ static const struct sys_reg_desc sys_reg_descs[] = { { PMU_SYS_REG(PMCCFILTR_EL0), .access = access_pmu_evtyper, .reset = reset_val, .reg = PMCCFILTR_EL0, .val = 0 }, - EL2_REG(VPIDR_EL2, access_rw, reset_unknown, 0), - EL2_REG(VMPIDR_EL2, access_rw, reset_unknown, 0), + EL2_REG_VNCR(VPIDR_EL2, reset_unknown, 0), + EL2_REG_VNCR(VMPIDR_EL2, reset_unknown, 0), EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1), EL2_REG(ACTLR_EL2, access_rw, reset_val, 0), - EL2_REG(HCR_EL2, access_rw, reset_val, 0), + EL2_REG_VNCR(HCR_EL2, reset_val, 0), EL2_REG(MDCR_EL2, access_rw, reset_val, 0), EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1), - EL2_REG(HSTR_EL2, access_rw, reset_val, 0), - EL2_REG(HFGRTR_EL2, access_rw, reset_val, 0), - EL2_REG(HFGWTR_EL2, access_rw, reset_val, 0), - EL2_REG(HFGITR_EL2, access_rw, reset_val, 0), - EL2_REG(HACR_EL2, access_rw, reset_val, 0), + EL2_REG_VNCR(HSTR_EL2, reset_val, 0), + EL2_REG_VNCR(HFGRTR_EL2, reset_val, 0), + EL2_REG_VNCR(HFGWTR_EL2, reset_val, 0), + EL2_REG_VNCR(HFGITR_EL2, reset_val, 0), + EL2_REG_VNCR(HACR_EL2, reset_val, 0), - EL2_REG(HCRX_EL2, access_rw, reset_val, 0), + EL2_REG_VNCR(HCRX_EL2, reset_val, 0), EL2_REG(TTBR0_EL2, access_rw, reset_val, 0), EL2_REG(TTBR1_EL2, access_rw, reset_val, 0), EL2_REG(TCR_EL2, access_rw, reset_val, TCR_EL2_RES1), - EL2_REG(VTTBR_EL2, access_rw, reset_val, 0), - EL2_REG(VTCR_EL2, access_rw, reset_val, 0), + EL2_REG_VNCR(VTTBR_EL2, reset_val, 0), + EL2_REG_VNCR(VTCR_EL2, reset_val, 0), { SYS_DESC(SYS_DACR32_EL2), trap_undef, reset_unknown, DACR32_EL2 }, - EL2_REG(HDFGRTR_EL2, access_rw, reset_val, 0), - EL2_REG(HDFGWTR_EL2, access_rw, reset_val, 0), - EL2_REG(SPSR_EL2, access_rw, reset_val, 0), - EL2_REG(ELR_EL2, access_rw, reset_val, 0), + EL2_REG_VNCR(HDFGRTR_EL2, reset_val, 0), + EL2_REG_VNCR(HDFGWTR_EL2, reset_val, 0), + EL2_REG_VNCR(HAFGRTR_EL2, reset_val, 0), + EL2_REG_REDIR(SPSR_EL2, reset_val, 0), + EL2_REG_REDIR(ELR_EL2, reset_val, 0), { SYS_DESC(SYS_SP_EL1), access_sp_el1}, /* AArch32 SPSR_* are RES0 if trapped from a NV guest */ @@ -2549,10 +2703,10 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_IFSR32_EL2), trap_undef, reset_unknown, IFSR32_EL2 }, EL2_REG(AFSR0_EL2, access_rw, reset_val, 0), EL2_REG(AFSR1_EL2, access_rw, reset_val, 0), - EL2_REG(ESR_EL2, access_rw, reset_val, 0), + EL2_REG_REDIR(ESR_EL2, reset_val, 0), { SYS_DESC(SYS_FPEXC32_EL2), trap_undef, reset_val, FPEXC32_EL2, 0x700 }, - EL2_REG(FAR_EL2, access_rw, reset_val, 0), + EL2_REG_REDIR(FAR_EL2, reset_val, 0), EL2_REG(HPFAR_EL2, access_rw, reset_val, 0), EL2_REG(MAIR_EL2, access_rw, reset_val, 0), @@ -2565,24 +2719,9 @@ static const struct sys_reg_desc sys_reg_descs[] = { EL2_REG(CONTEXTIDR_EL2, access_rw, reset_val, 0), EL2_REG(TPIDR_EL2, access_rw, reset_val, 0), - EL2_REG(CNTVOFF_EL2, access_rw, reset_val, 0), + EL2_REG_VNCR(CNTVOFF_EL2, reset_val, 0), EL2_REG(CNTHCTL_EL2, access_rw, reset_val, 0), - EL12_REG(SCTLR, access_vm_reg, reset_val, 0x00C50078), - EL12_REG(CPACR, access_rw, reset_val, 0), - EL12_REG(TTBR0, access_vm_reg, reset_unknown, 0), - EL12_REG(TTBR1, access_vm_reg, reset_unknown, 0), - EL12_REG(TCR, access_vm_reg, reset_val, 0), - { SYS_DESC(SYS_SPSR_EL12), access_spsr}, - { SYS_DESC(SYS_ELR_EL12), access_elr}, - EL12_REG(AFSR0, access_vm_reg, reset_unknown, 0), - EL12_REG(AFSR1, access_vm_reg, reset_unknown, 0), - EL12_REG(ESR, access_vm_reg, reset_unknown, 0), - EL12_REG(FAR, access_vm_reg, reset_unknown, 0), - EL12_REG(MAIR, access_vm_reg, reset_unknown, 0), - EL12_REG(AMAIR, access_vm_reg, reset_amair_el1, 0), - EL12_REG(VBAR, access_rw, reset_val, 0), - EL12_REG(CONTEXTIDR, access_vm_reg, reset_val, 0), EL12_REG(CNTKCTL, access_rw, reset_val, 0), EL2_REG(SP_EL2, NULL, reset_unknown, 0), diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index 2533f264b9..c15ee1df03 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -357,38 +357,13 @@ static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) { - u32 intid = VGIC_ADDR_TO_INTID(addr, 1); - int i; - unsigned long flags; - - for (i = 0; i < len * 8; i++) { - struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); - - raw_spin_lock_irqsave(&irq->irq_lock, flags); - - /* - * pending_latch is set irrespective of irq type - * (level or edge) to avoid dependency that VM should - * restore irq config before pending info. - */ - irq->pending_latch = test_bit(i, &val); - - if (irq->hw && vgic_irq_is_sgi(irq->intid)) { - irq_set_irqchip_state(irq->host_irq, - IRQCHIP_STATE_PENDING, - irq->pending_latch); - irq->pending_latch = false; - } - - if (irq->pending_latch) - vgic_queue_irq_unlock(vcpu->kvm, irq, flags); - else - raw_spin_unlock_irqrestore(&irq->irq_lock, flags); + int ret; - vgic_put_irq(vcpu->kvm, irq); - } + ret = vgic_uaccess_write_spending(vcpu, addr, len, val); + if (ret) + return ret; - return 0; + return vgic_uaccess_write_cpending(vcpu, addr, len, ~val); } /* We want to avoid outer shareable. */ diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c index ff558c05e9..cf76523a21 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio.c +++ b/arch/arm64/kvm/vgic/vgic-mmio.c @@ -301,9 +301,8 @@ static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq) vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2); } -void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, - gpa_t addr, unsigned int len, - unsigned long val) +static void __set_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, + unsigned long val, bool is_user) { u32 intid = VGIC_ADDR_TO_INTID(addr, 1); int i; @@ -312,14 +311,22 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, for_each_set_bit(i, &val, len * 8) { struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); - /* GICD_ISPENDR0 SGI bits are WI */ - if (is_vgic_v2_sgi(vcpu, irq)) { + /* GICD_ISPENDR0 SGI bits are WI when written from the guest. */ + if (is_vgic_v2_sgi(vcpu, irq) && !is_user) { vgic_put_irq(vcpu->kvm, irq); continue; } raw_spin_lock_irqsave(&irq->irq_lock, flags); + /* + * GICv2 SGIs are terribly broken. We can't restore + * the source of the interrupt, so just pick the vcpu + * itself as the source... + */ + if (is_vgic_v2_sgi(vcpu, irq)) + irq->source |= BIT(vcpu->vcpu_id); + if (irq->hw && vgic_irq_is_sgi(irq->intid)) { /* HW SGI? Ask the GIC to inject it */ int err; @@ -335,7 +342,7 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, } irq->pending_latch = true; - if (irq->hw) + if (irq->hw && !is_user) vgic_irq_set_phys_active(irq, true); vgic_queue_irq_unlock(vcpu->kvm, irq, flags); @@ -343,33 +350,18 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, } } +void vgic_mmio_write_spending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val) +{ + __set_pending(vcpu, addr, len, val, false); +} + int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) { - u32 intid = VGIC_ADDR_TO_INTID(addr, 1); - int i; - unsigned long flags; - - for_each_set_bit(i, &val, len * 8) { - struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); - - raw_spin_lock_irqsave(&irq->irq_lock, flags); - irq->pending_latch = true; - - /* - * GICv2 SGIs are terribly broken. We can't restore - * the source of the interrupt, so just pick the vcpu - * itself as the source... - */ - if (is_vgic_v2_sgi(vcpu, irq)) - irq->source |= BIT(vcpu->vcpu_id); - - vgic_queue_irq_unlock(vcpu->kvm, irq, flags); - - vgic_put_irq(vcpu->kvm, irq); - } - + __set_pending(vcpu, addr, len, val, true); return 0; } @@ -394,9 +386,9 @@ static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq) vgic_irq_set_phys_active(irq, false); } -void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, - gpa_t addr, unsigned int len, - unsigned long val) +static void __clear_pending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val, bool is_user) { u32 intid = VGIC_ADDR_TO_INTID(addr, 1); int i; @@ -405,14 +397,22 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, for_each_set_bit(i, &val, len * 8) { struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); - /* GICD_ICPENDR0 SGI bits are WI */ - if (is_vgic_v2_sgi(vcpu, irq)) { + /* GICD_ICPENDR0 SGI bits are WI when written from the guest. */ + if (is_vgic_v2_sgi(vcpu, irq) && !is_user) { vgic_put_irq(vcpu->kvm, irq); continue; } raw_spin_lock_irqsave(&irq->irq_lock, flags); + /* + * More fun with GICv2 SGIs! If we're clearing one of them + * from userspace, which source vcpu to clear? Let's not + * even think of it, and blow the whole set. + */ + if (is_vgic_v2_sgi(vcpu, irq)) + irq->source = 0; + if (irq->hw && vgic_irq_is_sgi(irq->intid)) { /* HW SGI? Ask the GIC to clear its pending bit */ int err; @@ -427,7 +427,7 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, continue; } - if (irq->hw) + if (irq->hw && !is_user) vgic_hw_irq_cpending(vcpu, irq); else irq->pending_latch = false; @@ -437,33 +437,18 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, } } +void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu, + gpa_t addr, unsigned int len, + unsigned long val) +{ + __clear_pending(vcpu, addr, len, val, false); +} + int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len, unsigned long val) { - u32 intid = VGIC_ADDR_TO_INTID(addr, 1); - int i; - unsigned long flags; - - for_each_set_bit(i, &val, len * 8) { - struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); - - raw_spin_lock_irqsave(&irq->irq_lock, flags); - /* - * More fun with GICv2 SGIs! If we're clearing one of them - * from userspace, which source vcpu to clear? Let's not - * even think of it, and blow the whole set. - */ - if (is_vgic_v2_sgi(vcpu, irq)) - irq->source = 0; - - irq->pending_latch = false; - - raw_spin_unlock_irqrestore(&irq->irq_lock, flags); - - vgic_put_irq(vcpu->kvm, irq); - } - + __clear_pending(vcpu, addr, len, val, true); return 0; } diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S index c336d2ffde..6a56d7cf30 100644 --- a/arch/arm64/lib/copy_page.S +++ b/arch/arm64/lib/copy_page.S @@ -18,13 +18,6 @@ * x1 - src */ SYM_FUNC_START(__pi_copy_page) -alternative_if ARM64_HAS_NO_HW_PREFETCH - // Prefetch three cache lines ahead. - prfm pldl1strm, [x1, #128] - prfm pldl1strm, [x1, #256] - prfm pldl1strm, [x1, #384] -alternative_else_nop_endif - ldp x2, x3, [x1] ldp x4, x5, [x1, #16] ldp x6, x7, [x1, #32] @@ -39,10 +32,6 @@ alternative_else_nop_endif 1: tst x0, #(PAGE_SIZE - 1) -alternative_if ARM64_HAS_NO_HW_PREFETCH - prfm pldl1strm, [x1, #384] -alternative_else_nop_endif - stnp x2, x3, [x0, #-256] ldp x2, x3, [x1] stnp x4, x5, [x0, #16 - 256] diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 3cb101e8cb..61886e43e3 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -47,7 +47,7 @@ void arch_teardown_dma_ops(struct device *dev) #endif void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, - const struct iommu_ops *iommu, bool coherent) + bool coherent) { int cls = cache_line_size_of_cpu(); @@ -58,7 +58,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, ARCH_DMA_MINALIGN, cls); dev->dma_coherent = coherent; - if (iommu) + if (device_iommu_mapped(dev)) iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1); xen_setup_dma_ops(dev); diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index f5aae34263..8116ac599f 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -51,7 +51,7 @@ void __init arm64_hugetlb_cma_reserve(void) * page allocator. Just warn if there is any change * breaking this assumption. */ - WARN_ON(order <= MAX_ORDER); + WARN_ON(order <= MAX_PAGE_ORDER); hugetlb_cma_reserve(order); } #endif /* CONFIG_CMA */ diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c index 555285ebd5..4c7ad574b9 100644 --- a/arch/arm64/mm/kasan_init.c +++ b/arch/arm64/mm/kasan_init.c @@ -170,6 +170,11 @@ asmlinkage void __init kasan_early_init(void) { BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT))); + /* + * We cannot check the actual value of KASAN_SHADOW_START during build, + * as it depends on vabits_actual. As a best-effort approach, check + * potential values calculated based on VA_BITS and VA_BITS_MIN. + */ BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS), PGDIR_SIZE)); BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS_MIN), PGDIR_SIZE)); BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)); diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 15f6347d23..1ac7467d34 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -52,9 +52,6 @@ u64 vabits_actual __ro_after_init = VA_BITS_MIN; EXPORT_SYMBOL(vabits_actual); #endif -u64 kimage_vaddr __ro_after_init = (u64)&_text; -EXPORT_SYMBOL(kimage_vaddr); - u64 kimage_voffset __ro_after_init; EXPORT_SYMBOL(kimage_voffset); @@ -674,6 +671,9 @@ static int __init map_entry_trampoline(void) { int i; + if (!arm64_kernel_unmapped_at_el0()) + return 0; + pgprot_t prot = kernel_exec_prot(); phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start); diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 924843f1f6..0a62f458c5 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -219,9 +219,6 @@ bool kernel_page_present(struct page *page) pte_t *ptep; unsigned long addr = (unsigned long)page_address(page); - if (!can_set_direct_map()) - return true; - pgdp = pgd_offset_k(addr); if (pgd_none(READ_ONCE(*pgdp))) return false; diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index 7d4af64e39..00217d8d03 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -876,7 +876,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, emit(A64_UXTH(is64, dst, dst), ctx); break; case 32: - emit(A64_REV32(is64, dst, dst), ctx); + emit(A64_REV32(0, dst, dst), ctx); /* upper 32 bits already cleared */ break; case 64: @@ -1189,7 +1189,7 @@ emit_cond_jmp: } else { emit_a64_mov_i(1, tmp, off, ctx); if (sign_extend) - emit(A64_LDRSW(dst, src_adj, off_adj), ctx); + emit(A64_LDRSW(dst, src, tmp), ctx); else emit(A64_LDR32(dst, src, tmp), ctx); } @@ -1828,7 +1828,7 @@ static void restore_args(struct jit_ctx *ctx, int args_off, int nregs) * */ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im, - struct bpf_tramp_links *tlinks, void *orig_call, + struct bpf_tramp_links *tlinks, void *func_addr, int nregs, u32 flags) { int i; @@ -1926,7 +1926,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im, if (flags & BPF_TRAMP_F_IP_ARG) { /* save ip address of the traced function */ - emit_addr_mov_i64(A64_R(10), (const u64)orig_call, ctx); + emit_addr_mov_i64(A64_R(10), (const u64)func_addr, ctx); emit(A64_STR64I(A64_R(10), A64_SP, ip_off), ctx); } @@ -2026,18 +2026,10 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im, return ctx->idx; } -int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, - void *image_end, const struct btf_func_model *m, - u32 flags, struct bpf_tramp_links *tlinks, - void *orig_call) +static int btf_func_model_nregs(const struct btf_func_model *m) { - int i, ret; int nregs = m->nr_args; - int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE; - struct jit_ctx ctx = { - .image = NULL, - .idx = 0, - }; + int i; /* extra registers needed for struct argument */ for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) { @@ -2046,22 +2038,49 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, nregs += (m->arg_size[i] + 7) / 8 - 1; } + return nregs; +} + +int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags, + struct bpf_tramp_links *tlinks, void *func_addr) +{ + struct jit_ctx ctx = { + .image = NULL, + .idx = 0, + }; + struct bpf_tramp_image im; + int nregs, ret; + + nregs = btf_func_model_nregs(m); /* the first 8 registers are used for arguments */ if (nregs > 8) return -ENOTSUPP; - ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags); + ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, nregs, flags); if (ret < 0) return ret; - if (ret > max_insns) - return -EFBIG; + return ret < 0 ? ret : ret * AARCH64_INSN_SIZE; +} - ctx.image = image; - ctx.idx = 0; +int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, + void *image_end, const struct btf_func_model *m, + u32 flags, struct bpf_tramp_links *tlinks, + void *func_addr) +{ + int ret, nregs; + struct jit_ctx ctx = { + .image = image, + .idx = 0, + }; + + nregs = btf_func_model_nregs(m); + /* the first 8 registers are used for arguments */ + if (nregs > 8) + return -ENOTSUPP; jit_fill_hole(image, (unsigned int)(image_end - image)); - ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags); + ret = prepare_trampoline(&ctx, im, tlinks, func_addr, nregs, flags); if (ret > 0 && validate_code(&ctx) < 0) ret = -EINVAL; diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps index 3781ad1d0b..b912b1409f 100644 --- a/arch/arm64/tools/cpucaps +++ b/arch/arm64/tools/cpucaps @@ -37,10 +37,10 @@ HAS_GIC_PRIO_MASKING HAS_GIC_PRIO_RELAXED_SYNC HAS_HCX HAS_LDAPR +HAS_LPA2 HAS_LSE_ATOMICS HAS_MOPS HAS_NESTED_VIRT -HAS_NO_HW_PREFETCH HAS_PAN HAS_S1PIE HAS_RAS_EXTN diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg index 96cbeeab4e..4c9b679343 100644 --- a/arch/arm64/tools/sysreg +++ b/arch/arm64/tools/sysreg @@ -1002,6 +1002,27 @@ UnsignedEnum 3:0 BT EndEnum EndSysreg +Sysreg ID_AA64PFR2_EL1 3 0 0 4 2 +Res0 63:36 +UnsignedEnum 35:32 FPMR + 0b0000 NI + 0b0001 IMP +EndEnum +Res0 31:12 +UnsignedEnum 11:8 MTEFAR + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 7:4 MTESTOREONLY + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 3:0 MTEPERM + 0b0000 NI + 0b0001 IMP +EndEnum +EndSysreg + Sysreg ID_AA64ZFR0_EL1 3 0 0 4 4 Res0 63:60 UnsignedEnum 59:56 F64MM @@ -1058,7 +1079,11 @@ UnsignedEnum 63 FA64 0b0 NI 0b1 IMP EndEnum -Res0 62:60 +Res0 62:61 +UnsignedEnum 60 LUTv2 + 0b0 NI + 0b1 IMP +EndEnum UnsignedEnum 59:56 SMEver 0b0000 SME 0b0001 SME2 @@ -1086,7 +1111,14 @@ UnsignedEnum 42 F16F16 0b0 NI 0b1 IMP EndEnum -Res0 41:40 +UnsignedEnum 41 F8F16 + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 40 F8F32 + 0b0 NI + 0b1 IMP +EndEnum UnsignedEnum 39:36 I8I32 0b0000 NI 0b1111 IMP @@ -1107,7 +1139,49 @@ UnsignedEnum 32 F32F32 0b0 NI 0b1 IMP EndEnum -Res0 31:0 +Res0 31 +UnsignedEnum 30 SF8FMA + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 29 SF8DP4 + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 28 SF8DP2 + 0b0 NI + 0b1 IMP +EndEnum +Res0 27:0 +EndSysreg + +Sysreg ID_AA64FPFR0_EL1 3 0 0 4 7 +Res0 63:32 +UnsignedEnum 31 F8CVT + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 30 F8FMA + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 29 F8DP4 + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 28 F8DP2 + 0b0 NI + 0b1 IMP +EndEnum +Res0 27:2 +UnsignedEnum 1 F8E4M3 + 0b0 NI + 0b1 IMP +EndEnum +UnsignedEnum 0 F8E5M2 + 0b0 NI + 0b1 IMP +EndEnum EndSysreg Sysreg ID_AA64DFR0_EL1 3 0 0 5 0 @@ -1115,7 +1189,10 @@ Enum 63:60 HPMN0 0b0000 UNPREDICTABLE 0b0001 DEF EndEnum -Res0 59:56 +UnsignedEnum 59:56 ExtTrcBuff + 0b0000 NI + 0b0001 IMP +EndEnum UnsignedEnum 55:52 BRBE 0b0000 NI 0b0001 IMP @@ -1327,6 +1404,7 @@ UnsignedEnum 11:8 API 0b0011 PAuth2 0b0100 FPAC 0b0101 FPACCOMBINE + 0b0110 PAuth_LR EndEnum UnsignedEnum 7:4 APA 0b0000 NI @@ -1335,6 +1413,7 @@ UnsignedEnum 7:4 APA 0b0011 PAuth2 0b0100 FPAC 0b0101 FPACCOMBINE + 0b0110 PAuth_LR EndEnum UnsignedEnum 3:0 DPB 0b0000 NI @@ -1344,7 +1423,14 @@ EndEnum EndSysreg Sysreg ID_AA64ISAR2_EL1 3 0 0 6 2 -Res0 63:56 +UnsignedEnum 63:60 ATS1A + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 59:56 LUT + 0b0000 NI + 0b0001 IMP +EndEnum UnsignedEnum 55:52 CSSC 0b0000 NI 0b0001 IMP @@ -1353,7 +1439,19 @@ UnsignedEnum 51:48 RPRFM 0b0000 NI 0b0001 IMP EndEnum -Res0 47:32 +Res0 47:44 +UnsignedEnum 43:40 PRFMSLC + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 39:36 SYSINSTR_128 + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 35:32 SYSREG_128 + 0b0000 NI + 0b0001 IMP +EndEnum UnsignedEnum 31:28 CLRBHB 0b0000 NI 0b0001 IMP @@ -1377,6 +1475,7 @@ UnsignedEnum 15:12 APA3 0b0011 PAuth2 0b0100 FPAC 0b0101 FPACCOMBINE + 0b0110 PAuth_LR EndEnum UnsignedEnum 11:8 GPA3 0b0000 NI @@ -1392,6 +1491,23 @@ UnsignedEnum 3:0 WFxT EndEnum EndSysreg +Sysreg ID_AA64ISAR3_EL1 3 0 0 6 3 +Res0 63:12 +UnsignedEnum 11:8 TLBIW + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 7:4 FAMINMAX + 0b0000 NI + 0b0001 IMP +EndEnum +UnsignedEnum 3:0 CPA + 0b0000 NI + 0b0001 IMP + 0b0010 CPA2 +EndEnum +EndSysreg + Sysreg ID_AA64MMFR0_EL1 3 0 0 7 0 UnsignedEnum 63:60 ECV 0b0000 NI @@ -1680,7 +1796,8 @@ Field 63 TIDCP Field 62 SPINTMASK Field 61 NMI Field 60 EnTP2 -Res0 59:58 +Field 59 TCSO +Field 58 TCSO0 Field 57 EPAN Field 56 EnALS Field 55 EnAS0 @@ -1709,7 +1826,7 @@ EndEnum Field 37 ITFSB Field 36 BT1 Field 35 BT0 -Res0 34 +Field 34 EnFPM Field 33 MSCEn Field 32 CMOW Field 31 EnIA @@ -1747,7 +1864,8 @@ Field 0 M EndSysreg SysregFields CPACR_ELx -Res0 63:29 +Res0 63:30 +Field 29 E0POE Field 28 TTA Res0 27:26 Field 25:24 SMEN @@ -1790,6 +1908,41 @@ Sysreg SMCR_EL1 3 0 1 2 6 Fields SMCR_ELx EndSysreg +SysregFields GCSCR_ELx +Res0 63:10 +Field 9 STREn +Field 8 PUSHMEn +Res0 7 +Field 6 EXLOCKEN +Field 5 RVCHKEN +Res0 4:1 +Field 0 PCRSEL +EndSysregFields + +Sysreg GCSCR_EL1 3 0 2 5 0 +Fields GCSCR_ELx +EndSysreg + +SysregFields GCSPR_ELx +Field 63:3 PTR +Res0 2:0 +EndSysregFields + +Sysreg GCSPR_EL1 3 0 2 5 1 +Fields GCSPR_ELx +EndSysreg + +Sysreg GCSCRE0_EL1 3 0 2 5 2 +Res0 63:11 +Field 10 nTR +Field 9 STREn +Field 8 PUSHMEn +Res0 7:6 +Field 5 RVCHKEN +Res0 4:1 +Field 0 PCRSEL +EndSysreg + Sysreg ALLINT 3 0 4 3 0 Res0 63:14 Field 13 ALLINT @@ -1933,10 +2086,18 @@ Sysreg CONTEXTIDR_EL1 3 0 13 0 1 Fields CONTEXTIDR_ELx EndSysreg +Sysreg RCWSMASK_EL1 3 0 13 0 3 +Field 63:0 RCWSMASK +EndSysreg + Sysreg TPIDR_EL1 3 0 13 0 4 Field 63:0 ThreadID EndSysreg +Sysreg RCWMASK_EL1 3 0 13 0 6 +Field 63:0 RCWMASK +EndSysreg + Sysreg SCXTNUM_EL1 3 0 13 0 7 Field 63:0 SoftwareContextNumber EndSysreg @@ -2004,9 +2165,10 @@ Field 27:24 CWG Field 23:20 ERG Field 19:16 DminLine Enum 15:14 L1Ip - 0b00 VPIPT + # This was named as VPIPT in the ARM but now documented as reserved + 0b00 RESERVED_VPIPT # This is named as AIVIVT in the ARM but documented as reserved - 0b01 RESERVED + 0b01 RESERVED_AIVIVT 0b10 VIPT 0b11 PIPT EndEnum @@ -2020,12 +2182,39 @@ Field 4 DZP Field 3:0 BS EndSysreg +Sysreg GCSPR_EL0 3 3 2 5 1 +Fields GCSPR_ELx +EndSysreg + Sysreg SVCR 3 3 4 2 2 Res0 63:2 Field 1 ZA Field 0 SM EndSysreg +Sysreg FPMR 3 3 4 4 2 +Res0 63:38 +Field 37:32 LSCALE2 +Field 31:24 NSCALE +Res0 23 +Field 22:16 LSCALE +Field 15 OSC +Field 14 OSM +Res0 13:9 +UnsignedEnum 8:6 F8D + 0b000 E5M2 + 0b001 E4M3 +EndEnum +UnsignedEnum 5:3 F8S2 + 0b000 E5M2 + 0b001 E4M3 +EndEnum +UnsignedEnum 2:0 F8S1 + 0b000 E5M2 + 0b001 E4M3 +EndEnum +EndSysreg + SysregFields HFGxTR_EL2 Field 63 nAMAIR2_EL1 Field 62 nMAIR2_EL1 @@ -2102,7 +2291,9 @@ Fields HFGxTR_EL2 EndSysreg Sysreg HFGITR_EL2 3 4 1 1 6 -Res0 63:61 +Res0 63 +Field 62 ATS1E1A +Res0 61 Field 60 COSPRCTX Field 59 nGCSEPP Field 58 nGCSSTR_EL1 @@ -2295,12 +2486,57 @@ Field 1 DBGBVRn_EL1 Field 0 DBGBCRn_EL1 EndSysreg +Sysreg HAFGRTR_EL2 3 4 3 1 6 +Res0 63:50 +Field 49 AMEVTYPER115_EL0 +Field 48 AMEVCNTR115_EL0 +Field 47 AMEVTYPER114_EL0 +Field 46 AMEVCNTR114_EL0 +Field 45 AMEVTYPER113_EL0 +Field 44 AMEVCNTR113_EL0 +Field 43 AMEVTYPER112_EL0 +Field 42 AMEVCNTR112_EL0 +Field 41 AMEVTYPER111_EL0 +Field 40 AMEVCNTR111_EL0 +Field 39 AMEVTYPER110_EL0 +Field 38 AMEVCNTR110_EL0 +Field 37 AMEVTYPER19_EL0 +Field 36 AMEVCNTR19_EL0 +Field 35 AMEVTYPER18_EL0 +Field 34 AMEVCNTR18_EL0 +Field 33 AMEVTYPER17_EL0 +Field 32 AMEVCNTR17_EL0 +Field 31 AMEVTYPER16_EL0 +Field 30 AMEVCNTR16_EL0 +Field 29 AMEVTYPER15_EL0 +Field 28 AMEVCNTR15_EL0 +Field 27 AMEVTYPER14_EL0 +Field 26 AMEVCNTR14_EL0 +Field 25 AMEVTYPER13_EL0 +Field 24 AMEVCNTR13_EL0 +Field 23 AMEVTYPER12_EL0 +Field 22 AMEVCNTR12_EL0 +Field 21 AMEVTYPER11_EL0 +Field 20 AMEVCNTR11_EL0 +Field 19 AMEVTYPER10_EL0 +Field 18 AMEVCNTR10_EL0 +Field 17 AMCNTEN1 +Res0 16:5 +Field 4 AMEVCNTR03_EL0 +Field 3 AMEVCNTR02_EL0 +Field 2 AMEVCNTR01_EL0 +Field 1 AMEVCNTR00_EL0 +Field 0 AMCNTEN0 +EndSysreg + Sysreg ZCR_EL2 3 4 1 2 0 Fields ZCR_ELx EndSysreg Sysreg HCRX_EL2 3 4 1 2 2 -Res0 63:23 +Res0 63:25 +Field 24 PACMEn +Field 23 EnFPM Field 22 GCSEn Field 21 EnIDCP128 Field 20 EnSDERR @@ -2348,6 +2584,14 @@ Sysreg SMCR_EL2 3 4 1 2 6 Fields SMCR_ELx EndSysreg +Sysreg GCSCR_EL2 3 4 2 5 0 +Fields GCSCR_ELx +EndSysreg + +Sysreg GCSPR_EL2 3 4 2 5 1 +Fields GCSPR_ELx +EndSysreg + Sysreg DACR32_EL2 3 4 3 0 0 Res0 63:32 Field 31:30 D15 @@ -2407,6 +2651,14 @@ Sysreg SMCR_EL12 3 5 1 2 6 Fields SMCR_ELx EndSysreg +Sysreg GCSCR_EL12 3 5 2 5 0 +Fields GCSCR_ELx +EndSysreg + +Sysreg GCSPR_EL12 3 5 2 5 1 +Fields GCSPR_ELx +EndSysreg + Sysreg FAR_EL12 3 5 6 0 0 Field 63:0 ADDR EndSysreg @@ -2471,6 +2723,33 @@ Field 1 PIE Field 0 PnCH EndSysreg +SysregFields MAIR2_ELx +Field 63:56 Attr7 +Field 55:48 Attr6 +Field 47:40 Attr5 +Field 39:32 Attr4 +Field 31:24 Attr3 +Field 23:16 Attr2 +Field 15:8 Attr1 +Field 7:0 Attr0 +EndSysregFields + +Sysreg MAIR2_EL1 3 0 10 2 1 +Fields MAIR2_ELx +EndSysreg + +Sysreg MAIR2_EL2 3 4 10 1 1 +Fields MAIR2_ELx +EndSysreg + +Sysreg AMAIR2_EL1 3 0 10 3 1 +Field 63:0 ImpDef +EndSysreg + +Sysreg AMAIR2_EL2 3 4 10 3 1 +Field 63:0 ImpDef +EndSysreg + SysregFields PIRx_ELx Field 63:60 Perm15 Field 59:56 Perm14 @@ -2510,6 +2789,26 @@ Sysreg PIR_EL2 3 4 10 2 3 Fields PIRx_ELx EndSysreg +Sysreg POR_EL0 3 3 10 2 4 +Fields PIRx_ELx +EndSysreg + +Sysreg POR_EL1 3 0 10 2 4 +Fields PIRx_ELx +EndSysreg + +Sysreg POR_EL12 3 5 10 2 4 +Fields PIRx_ELx +EndSysreg + +Sysreg S2POR_EL1 3 0 10 2 5 +Fields PIRx_ELx +EndSysreg + +Sysreg S2PIR_EL2 3 4 10 2 5 +Fields PIRx_ELx +EndSysreg + Sysreg LORSA_EL1 3 0 10 4 0 Res0 63:52 Field 51:16 SA |