summaryrefslogtreecommitdiffstats
path: root/arch/ia64/kernel/smpboot.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64/kernel/smpboot.c')
-rw-r--r--arch/ia64/kernel/smpboot.c839
1 files changed, 839 insertions, 0 deletions
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
new file mode 100644
index 0000000000..d0e935cf20
--- /dev/null
+++ b/arch/ia64/kernel/smpboot.c
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SMP boot-related support
+ *
+ * Copyright (C) 1998-2003, 2005 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2001, 2004-2005 Intel Corp
+ * Rohit Seth <rohit.seth@intel.com>
+ * Suresh Siddha <suresh.b.siddha@intel.com>
+ * Gordon Jin <gordon.jin@intel.com>
+ * Ashok Raj <ashok.raj@intel.com>
+ *
+ * 01/05/16 Rohit Seth <rohit.seth@intel.com> Moved SMP booting functions from smp.c to here.
+ * 01/04/27 David Mosberger <davidm@hpl.hp.com> Added ITC synching code.
+ * 02/07/31 David Mosberger <davidm@hpl.hp.com> Switch over to hotplug-CPU boot-sequence.
+ * smp_boot_cpus()/smp_commence() is replaced by
+ * smp_prepare_cpus()/__cpu_up()/smp_cpus_done().
+ * 04/06/21 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support
+ * 04/12/26 Jin Gordon <gordon.jin@intel.com>
+ * 04/12/26 Rohit Seth <rohit.seth@intel.com>
+ * Add multi-threading and multi-core detection
+ * 05/01/30 Suresh Siddha <suresh.b.siddha@intel.com>
+ * Setup cpu_sibling_map and cpu_core_map
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/memblock.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+#include <linux/percpu.h>
+#include <linux/bitops.h>
+
+#include <linux/atomic.h>
+#include <asm/cache.h>
+#include <asm/current.h>
+#include <asm/delay.h>
+#include <asm/efi.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mca.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/sal.h>
+#include <asm/tlbflush.h>
+#include <asm/unistd.h>
+
+#define SMP_DEBUG 0
+
+#if SMP_DEBUG
+#define Dprintk(x...) printk(x)
+#else
+#define Dprintk(x...)
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PERMIT_BSP_REMOVE
+#define bsp_remove_ok 1
+#else
+#define bsp_remove_ok 0
+#endif
+
+/*
+ * Global array allocated for NR_CPUS at boot time
+ */
+struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS];
+
+/*
+ * start_ap in head.S uses this to store current booting cpu
+ * info.
+ */
+struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0];
+
+#define set_brendez_area(x) (sal_state_for_booting_cpu = &sal_boot_rendez_state[(x)]);
+
+#else
+#define set_brendez_area(x)
+#endif
+
+
+/*
+ * ITC synchronization related stuff:
+ */
+#define MASTER (0)
+#define SLAVE (SMP_CACHE_BYTES/8)
+
+#define NUM_ROUNDS 64 /* magic value */
+#define NUM_ITERS 5 /* likewise */
+
+static DEFINE_SPINLOCK(itc_sync_lock);
+static volatile unsigned long go[SLAVE + 1];
+
+#define DEBUG_ITC_SYNC 0
+
+extern void start_ap (void);
+extern unsigned long ia64_iobase;
+
+struct task_struct *task_for_booting_cpu;
+
+/*
+ * State for each CPU
+ */
+DEFINE_PER_CPU(int, cpu_state);
+
+cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
+DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+
+int smp_num_siblings = 1;
+
+/* which logical CPU number maps to which CPU (physical APIC ID) */
+volatile int ia64_cpu_to_sapicid[NR_CPUS];
+EXPORT_SYMBOL(ia64_cpu_to_sapicid);
+
+static cpumask_t cpu_callin_map;
+
+struct smp_boot_data smp_boot_data __initdata;
+
+unsigned long ap_wakeup_vector = -1; /* External Int use to wakeup APs */
+
+char __initdata no_int_routing;
+
+unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
+
+#ifdef CONFIG_FORCE_CPEI_RETARGET
+#define CPEI_OVERRIDE_DEFAULT (1)
+#else
+#define CPEI_OVERRIDE_DEFAULT (0)
+#endif
+
+unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT;
+
+static int __init
+cmdl_force_cpei(char *str)
+{
+ int value=0;
+
+ get_option (&str, &value);
+ force_cpei_retarget = value;
+
+ return 1;
+}
+
+__setup("force_cpei=", cmdl_force_cpei);
+
+static int __init
+nointroute (char *str)
+{
+ no_int_routing = 1;
+ printk ("no_int_routing on\n");
+ return 1;
+}
+
+__setup("nointroute", nointroute);
+
+static void fix_b0_for_bsp(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ int cpuid;
+ static int fix_bsp_b0 = 1;
+
+ cpuid = smp_processor_id();
+
+ /*
+ * Cache the b0 value on the first AP that comes up
+ */
+ if (!(fix_bsp_b0 && cpuid))
+ return;
+
+ sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0];
+ printk ("Fixed BSP b0 value from CPU %d\n", cpuid);
+
+ fix_bsp_b0 = 0;
+#endif
+}
+
+void
+sync_master (void *arg)
+{
+ unsigned long flags, i;
+
+ go[MASTER] = 0;
+
+ local_irq_save(flags);
+ {
+ for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) {
+ while (!go[MASTER])
+ cpu_relax();
+ go[MASTER] = 0;
+ go[SLAVE] = ia64_get_itc();
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * Return the number of cycles by which our itc differs from the itc on the master
+ * (time-keeper) CPU. A positive number indicates our itc is ahead of the master,
+ * negative that it is behind.
+ */
+static inline long
+get_delta (long *rt, long *master)
+{
+ unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0;
+ unsigned long tcenter, t0, t1, tm;
+ long i;
+
+ for (i = 0; i < NUM_ITERS; ++i) {
+ t0 = ia64_get_itc();
+ go[MASTER] = 1;
+ while (!(tm = go[SLAVE]))
+ cpu_relax();
+ go[SLAVE] = 0;
+ t1 = ia64_get_itc();
+
+ if (t1 - t0 < best_t1 - best_t0)
+ best_t0 = t0, best_t1 = t1, best_tm = tm;
+ }
+
+ *rt = best_t1 - best_t0;
+ *master = best_tm - best_t0;
+
+ /* average best_t0 and best_t1 without overflow: */
+ tcenter = (best_t0/2 + best_t1/2);
+ if (best_t0 % 2 + best_t1 % 2 == 2)
+ ++tcenter;
+ return tcenter - best_tm;
+}
+
+/*
+ * Synchronize ar.itc of the current (slave) CPU with the ar.itc of the MASTER CPU
+ * (normally the time-keeper CPU). We use a closed loop to eliminate the possibility of
+ * unaccounted-for errors (such as getting a machine check in the middle of a calibration
+ * step). The basic idea is for the slave to ask the master what itc value it has and to
+ * read its own itc before and after the master responds. Each iteration gives us three
+ * timestamps:
+ *
+ * slave master
+ *
+ * t0 ---\
+ * ---\
+ * --->
+ * tm
+ * /---
+ * /---
+ * t1 <---
+ *
+ *
+ * The goal is to adjust the slave's ar.itc such that tm falls exactly half-way between t0
+ * and t1. If we achieve this, the clocks are synchronized provided the interconnect
+ * between the slave and the master is symmetric. Even if the interconnect were
+ * asymmetric, we would still know that the synchronization error is smaller than the
+ * roundtrip latency (t0 - t1).
+ *
+ * When the interconnect is quiet and symmetric, this lets us synchronize the itc to
+ * within one or two cycles. However, we can only *guarantee* that the synchronization is
+ * accurate to within a round-trip time, which is typically in the range of several
+ * hundred cycles (e.g., ~500 cycles). In practice, this means that the itc's are usually
+ * almost perfectly synchronized, but we shouldn't assume that the accuracy is much better
+ * than half a micro second or so.
+ */
+void
+ia64_sync_itc (unsigned int master)
+{
+ long i, delta, adj, adjust_latency = 0, done = 0;
+ unsigned long flags, rt, master_time_stamp, bound;
+#if DEBUG_ITC_SYNC
+ struct {
+ long rt; /* roundtrip time */
+ long master; /* master's timestamp */
+ long diff; /* difference between midpoint and master's timestamp */
+ long lat; /* estimate of itc adjustment latency */
+ } t[NUM_ROUNDS];
+#endif
+
+ /*
+ * Make sure local timer ticks are disabled while we sync. If
+ * they were enabled, we'd have to worry about nasty issues
+ * like setting the ITC ahead of (or a long time before) the
+ * next scheduled tick.
+ */
+ BUG_ON((ia64_get_itv() & (1 << 16)) == 0);
+
+ go[MASTER] = 1;
+
+ if (smp_call_function_single(master, sync_master, NULL, 0) < 0) {
+ printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master);
+ return;
+ }
+
+ while (go[MASTER])
+ cpu_relax(); /* wait for master to be ready */
+
+ spin_lock_irqsave(&itc_sync_lock, flags);
+ {
+ for (i = 0; i < NUM_ROUNDS; ++i) {
+ delta = get_delta(&rt, &master_time_stamp);
+ if (delta == 0) {
+ done = 1; /* let's lock on to this... */
+ bound = rt;
+ }
+
+ if (!done) {
+ if (i > 0) {
+ adjust_latency += -delta;
+ adj = -delta + adjust_latency/4;
+ } else
+ adj = -delta;
+
+ ia64_set_itc(ia64_get_itc() + adj);
+ }
+#if DEBUG_ITC_SYNC
+ t[i].rt = rt;
+ t[i].master = master_time_stamp;
+ t[i].diff = delta;
+ t[i].lat = adjust_latency/4;
+#endif
+ }
+ }
+ spin_unlock_irqrestore(&itc_sync_lock, flags);
+
+#if DEBUG_ITC_SYNC
+ for (i = 0; i < NUM_ROUNDS; ++i)
+ printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
+ t[i].rt, t[i].master, t[i].diff, t[i].lat);
+#endif
+
+ printk(KERN_INFO "CPU %d: synchronized ITC with CPU %u (last diff %ld cycles, "
+ "maxerr %lu cycles)\n", smp_processor_id(), master, delta, rt);
+}
+
+/*
+ * Ideally sets up per-cpu profiling hooks. Doesn't do much now...
+ */
+static inline void smp_setup_percpu_timer(void)
+{
+}
+
+static void
+smp_callin (void)
+{
+ int cpuid, phys_id, itc_master;
+ struct cpuinfo_ia64 *last_cpuinfo, *this_cpuinfo;
+ extern void ia64_init_itm(void);
+ extern volatile int time_keeper_id;
+
+ cpuid = smp_processor_id();
+ phys_id = hard_smp_processor_id();
+ itc_master = time_keeper_id;
+
+ if (cpu_online(cpuid)) {
+ printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
+ phys_id, cpuid);
+ BUG();
+ }
+
+ fix_b0_for_bsp();
+
+ /*
+ * numa_node_id() works after this.
+ */
+ set_numa_node(cpu_to_node_map[cpuid]);
+ set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
+
+ spin_lock(&vector_lock);
+ /* Setup the per cpu irq handling data structures */
+ __setup_vector_irq(cpuid);
+ notify_cpu_starting(cpuid);
+ set_cpu_online(cpuid, true);
+ per_cpu(cpu_state, cpuid) = CPU_ONLINE;
+ spin_unlock(&vector_lock);
+
+ smp_setup_percpu_timer();
+
+ ia64_mca_cmc_vector_setup(); /* Setup vector on AP */
+
+ local_irq_enable();
+
+ if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
+ /*
+ * Synchronize the ITC with the BP. Need to do this after irqs are
+ * enabled because ia64_sync_itc() calls smp_call_function_single(), which
+ * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
+ * local_bh_enable(), which bugs out if irqs are not enabled...
+ */
+ Dprintk("Going to syncup ITC with ITC Master.\n");
+ ia64_sync_itc(itc_master);
+ }
+
+ /*
+ * Get our bogomips.
+ */
+ ia64_init_itm();
+
+ /*
+ * Delay calibration can be skipped if new processor is identical to the
+ * previous processor.
+ */
+ last_cpuinfo = cpu_data(cpuid - 1);
+ this_cpuinfo = local_cpu_data;
+ if (last_cpuinfo->itc_freq != this_cpuinfo->itc_freq ||
+ last_cpuinfo->proc_freq != this_cpuinfo->proc_freq ||
+ last_cpuinfo->features != this_cpuinfo->features ||
+ last_cpuinfo->revision != this_cpuinfo->revision ||
+ last_cpuinfo->family != this_cpuinfo->family ||
+ last_cpuinfo->archrev != this_cpuinfo->archrev ||
+ last_cpuinfo->model != this_cpuinfo->model)
+ calibrate_delay();
+ local_cpu_data->loops_per_jiffy = loops_per_jiffy;
+
+ /*
+ * Allow the master to continue.
+ */
+ cpumask_set_cpu(cpuid, &cpu_callin_map);
+ Dprintk("Stack on CPU %d at about %p\n",cpuid, &cpuid);
+}
+
+
+/*
+ * Activate a secondary processor. head.S calls this.
+ */
+int
+start_secondary (void *unused)
+{
+ /* Early console may use I/O ports */
+ ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+#ifndef CONFIG_PRINTK_TIME
+ Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+#endif
+ efi_map_pal_code();
+ cpu_init();
+ smp_callin();
+
+ cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+ return 0;
+}
+
+static int
+do_boot_cpu (int sapicid, int cpu, struct task_struct *idle)
+{
+ int timeout;
+
+ task_for_booting_cpu = idle;
+ Dprintk("Sending wakeup vector %lu to AP 0x%x/0x%x.\n", ap_wakeup_vector, cpu, sapicid);
+
+ set_brendez_area(cpu);
+ ia64_send_ipi(cpu, ap_wakeup_vector, IA64_IPI_DM_INT, 0);
+
+ /*
+ * Wait 10s total for the AP to start
+ */
+ Dprintk("Waiting on callin_map ...");
+ for (timeout = 0; timeout < 100000; timeout++) {
+ if (cpumask_test_cpu(cpu, &cpu_callin_map))
+ break; /* It has booted */
+ barrier(); /* Make sure we re-read cpu_callin_map */
+ udelay(100);
+ }
+ Dprintk("\n");
+
+ if (!cpumask_test_cpu(cpu, &cpu_callin_map)) {
+ printk(KERN_ERR "Processor 0x%x/0x%x is stuck.\n", cpu, sapicid);
+ ia64_cpu_to_sapicid[cpu] = -1;
+ set_cpu_online(cpu, false); /* was set in smp_callin() */
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __init
+decay (char *str)
+{
+ int ticks;
+ get_option (&str, &ticks);
+ return 1;
+}
+
+__setup("decay=", decay);
+
+/*
+ * Initialize the logical CPU number to SAPICID mapping
+ */
+void __init
+smp_build_cpu_map (void)
+{
+ int sapicid, cpu, i;
+ int boot_cpu_id = hard_smp_processor_id();
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ ia64_cpu_to_sapicid[cpu] = -1;
+ }
+
+ ia64_cpu_to_sapicid[0] = boot_cpu_id;
+ init_cpu_present(cpumask_of(0));
+ set_cpu_possible(0, true);
+ for (cpu = 1, i = 0; i < smp_boot_data.cpu_count; i++) {
+ sapicid = smp_boot_data.cpu_phys_id[i];
+ if (sapicid == boot_cpu_id)
+ continue;
+ set_cpu_present(cpu, true);
+ set_cpu_possible(cpu, true);
+ ia64_cpu_to_sapicid[cpu] = sapicid;
+ cpu++;
+ }
+}
+
+/*
+ * Cycle through the APs sending Wakeup IPIs to boot each.
+ */
+void __init
+smp_prepare_cpus (unsigned int max_cpus)
+{
+ int boot_cpu_id = hard_smp_processor_id();
+
+ /*
+ * Initialize the per-CPU profiling counter/multiplier
+ */
+
+ smp_setup_percpu_timer();
+
+ cpumask_set_cpu(0, &cpu_callin_map);
+
+ local_cpu_data->loops_per_jiffy = loops_per_jiffy;
+ ia64_cpu_to_sapicid[0] = boot_cpu_id;
+
+ printk(KERN_INFO "Boot processor id 0x%x/0x%x\n", 0, boot_cpu_id);
+
+ current_thread_info()->cpu = 0;
+
+ /*
+ * If SMP should be disabled, then really disable it!
+ */
+ if (!max_cpus) {
+ printk(KERN_INFO "SMP mode deactivated.\n");
+ init_cpu_online(cpumask_of(0));
+ init_cpu_present(cpumask_of(0));
+ init_cpu_possible(cpumask_of(0));
+ return;
+ }
+}
+
+void smp_prepare_boot_cpu(void)
+{
+ set_cpu_online(smp_processor_id(), true);
+ cpumask_set_cpu(smp_processor_id(), &cpu_callin_map);
+ set_numa_node(cpu_to_node_map[smp_processor_id()]);
+ per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline void
+clear_cpu_sibling_map(int cpu)
+{
+ int i;
+
+ for_each_cpu(i, &per_cpu(cpu_sibling_map, cpu))
+ cpumask_clear_cpu(cpu, &per_cpu(cpu_sibling_map, i));
+ for_each_cpu(i, &cpu_core_map[cpu])
+ cpumask_clear_cpu(cpu, &cpu_core_map[i]);
+
+ per_cpu(cpu_sibling_map, cpu) = cpu_core_map[cpu] = CPU_MASK_NONE;
+}
+
+static void
+remove_siblinginfo(int cpu)
+{
+ if (cpu_data(cpu)->threads_per_core == 1 &&
+ cpu_data(cpu)->cores_per_socket == 1) {
+ cpumask_clear_cpu(cpu, &cpu_core_map[cpu]);
+ cpumask_clear_cpu(cpu, &per_cpu(cpu_sibling_map, cpu));
+ return;
+ }
+
+ /* remove it from all sibling map's */
+ clear_cpu_sibling_map(cpu);
+}
+
+extern void fixup_irqs(void);
+
+int migrate_platform_irqs(unsigned int cpu)
+{
+ int new_cpei_cpu;
+ struct irq_data *data = NULL;
+ const struct cpumask *mask;
+ int retval = 0;
+
+ /*
+ * dont permit CPEI target to removed.
+ */
+ if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) {
+ printk ("CPU (%d) is CPEI Target\n", cpu);
+ if (can_cpei_retarget()) {
+ /*
+ * Now re-target the CPEI to a different processor
+ */
+ new_cpei_cpu = cpumask_any(cpu_online_mask);
+ mask = cpumask_of(new_cpei_cpu);
+ set_cpei_target_cpu(new_cpei_cpu);
+ data = irq_get_irq_data(ia64_cpe_irq);
+ /*
+ * Switch for now, immediately, we need to do fake intr
+ * as other interrupts, but need to study CPEI behaviour with
+ * polling before making changes.
+ */
+ if (data && data->chip) {
+ data->chip->irq_disable(data);
+ data->chip->irq_set_affinity(data, mask, false);
+ data->chip->irq_enable(data);
+ printk ("Re-targeting CPEI to cpu %d\n", new_cpei_cpu);
+ }
+ }
+ if (!data) {
+ printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu);
+ retval = -EBUSY;
+ }
+ }
+ return retval;
+}
+
+/* must be called with cpucontrol mutex held */
+int __cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * dont permit boot processor for now
+ */
+ if (cpu == 0 && !bsp_remove_ok) {
+ printk ("Your platform does not support removal of BSP\n");
+ return (-EBUSY);
+ }
+
+ set_cpu_online(cpu, false);
+
+ if (migrate_platform_irqs(cpu)) {
+ set_cpu_online(cpu, true);
+ return -EBUSY;
+ }
+
+ remove_siblinginfo(cpu);
+ fixup_irqs();
+ local_flush_tlb_all();
+ cpumask_clear_cpu(cpu, &cpu_callin_map);
+ return 0;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+ unsigned int i;
+
+ for (i = 0; i < 100; i++) {
+ /* They ack this in play_dead by setting CPU_DEAD */
+ if (per_cpu(cpu_state, cpu) == CPU_DEAD)
+ {
+ printk ("CPU %d is now offline\n", cpu);
+ return;
+ }
+ msleep(100);
+ }
+ printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+void
+smp_cpus_done (unsigned int dummy)
+{
+ int cpu;
+ unsigned long bogosum = 0;
+
+ /*
+ * Allow the user to impress friends.
+ */
+
+ for_each_online_cpu(cpu) {
+ bogosum += cpu_data(cpu)->loops_per_jiffy;
+ }
+
+ printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+ (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
+}
+
+static inline void set_cpu_sibling_map(int cpu)
+{
+ int i;
+
+ for_each_online_cpu(i) {
+ if ((cpu_data(cpu)->socket_id == cpu_data(i)->socket_id)) {
+ cpumask_set_cpu(i, &cpu_core_map[cpu]);
+ cpumask_set_cpu(cpu, &cpu_core_map[i]);
+ if (cpu_data(cpu)->core_id == cpu_data(i)->core_id) {
+ cpumask_set_cpu(i,
+ &per_cpu(cpu_sibling_map, cpu));
+ cpumask_set_cpu(cpu,
+ &per_cpu(cpu_sibling_map, i));
+ }
+ }
+ }
+}
+
+int
+__cpu_up(unsigned int cpu, struct task_struct *tidle)
+{
+ int ret;
+ int sapicid;
+
+ sapicid = ia64_cpu_to_sapicid[cpu];
+ if (sapicid == -1)
+ return -EINVAL;
+
+ /*
+ * Already booted cpu? not valid anymore since we dont
+ * do idle loop tightspin anymore.
+ */
+ if (cpumask_test_cpu(cpu, &cpu_callin_map))
+ return -EINVAL;
+
+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+ /* Processor goes to start_secondary(), sets online flag */
+ ret = do_boot_cpu(sapicid, cpu, tidle);
+ if (ret < 0)
+ return ret;
+
+ if (cpu_data(cpu)->threads_per_core == 1 &&
+ cpu_data(cpu)->cores_per_socket == 1) {
+ cpumask_set_cpu(cpu, &per_cpu(cpu_sibling_map, cpu));
+ cpumask_set_cpu(cpu, &cpu_core_map[cpu]);
+ return 0;
+ }
+
+ set_cpu_sibling_map(cpu);
+
+ return 0;
+}
+
+/*
+ * Assume that CPUs have been discovered by some platform-dependent interface. For
+ * SoftSDV/Lion, that would be ACPI.
+ *
+ * Setup of the IPI irq handler is done in irq.c:init_IRQ_SMP().
+ */
+void __init
+init_smp_config(void)
+{
+ struct fptr {
+ unsigned long fp;
+ unsigned long gp;
+ } *ap_startup;
+ long sal_ret;
+
+ /* Tell SAL where to drop the APs. */
+ ap_startup = (struct fptr *) start_ap;
+ sal_ret = ia64_sal_set_vectors(SAL_VECTOR_OS_BOOT_RENDEZ,
+ ia64_tpa(ap_startup->fp), ia64_tpa(ap_startup->gp), 0, 0, 0, 0);
+ if (sal_ret < 0)
+ printk(KERN_ERR "SMP: Can't set SAL AP Boot Rendezvous: %s\n",
+ ia64_sal_strerror(sal_ret));
+}
+
+/*
+ * identify_siblings(cpu) gets called from identify_cpu. This populates the
+ * information related to logical execution units in per_cpu_data structure.
+ */
+void identify_siblings(struct cpuinfo_ia64 *c)
+{
+ long status;
+ u16 pltid;
+ pal_logical_to_physical_t info;
+
+ status = ia64_pal_logical_to_phys(-1, &info);
+ if (status != PAL_STATUS_SUCCESS) {
+ if (status != PAL_STATUS_UNIMPLEMENTED) {
+ printk(KERN_ERR
+ "ia64_pal_logical_to_phys failed with %ld\n",
+ status);
+ return;
+ }
+
+ info.overview_ppid = 0;
+ info.overview_cpp = 1;
+ info.overview_tpc = 1;
+ }
+
+ status = ia64_sal_physical_id_info(&pltid);
+ if (status != PAL_STATUS_SUCCESS) {
+ if (status != PAL_STATUS_UNIMPLEMENTED)
+ printk(KERN_ERR
+ "ia64_sal_pltid failed with %ld\n",
+ status);
+ return;
+ }
+
+ c->socket_id = (pltid << 8) | info.overview_ppid;
+
+ if (info.overview_cpp == 1 && info.overview_tpc == 1)
+ return;
+
+ c->cores_per_socket = info.overview_cpp;
+ c->threads_per_core = info.overview_tpc;
+ c->num_log = info.overview_num_log;
+
+ c->core_id = info.log1_cid;
+ c->thread_id = info.log1_tid;
+}
+
+/*
+ * returns non zero, if multi-threading is enabled
+ * on at least one physical package. Due to hotplug cpu
+ * and (maxcpus=), all threads may not necessarily be enabled
+ * even though the processor supports multi-threading.
+ */
+int is_multithreading_enabled(void)
+{
+ int i, j;
+
+ for_each_present_cpu(i) {
+ for_each_present_cpu(j) {
+ if (j == i)
+ continue;
+ if ((cpu_data(j)->socket_id == cpu_data(i)->socket_id)) {
+ if (cpu_data(j)->core_id == cpu_data(i)->core_id)
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(is_multithreading_enabled);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 00:26:13 +0000