diff options
Diffstat (limited to 'arch/m68k/coldfire/m5307.c')
| -rw-r--r-- | arch/m68k/coldfire/m5307.c | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/m5307.c b/arch/m68k/coldfire/m5307.c new file mode 100644 index 0000000000..4ed2e43ab3 --- /dev/null +++ b/arch/m68k/coldfire/m5307.c @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/***************************************************************************/ + +/* + * m5307.c -- platform support for ColdFire 5307 based boards + * + * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2000, Lineo (www.lineo.com) + */ + +/***************************************************************************/ + +#include <linux/clkdev.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfwdebug.h> +#include <asm/mcfclk.h> + +/***************************************************************************/ + +/* + * Some platforms need software versions of the GPIO data registers. + */ +unsigned short ppdata; +unsigned char ledbank = 0xff; + +/***************************************************************************/ + +DEFINE_CLK(pll, "pll.0", MCF_CLK); +DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); + +static struct clk_lookup m5307_clk_lookup[] = { + CLKDEV_INIT(NULL, "pll.0", &clk_pll), + CLKDEV_INIT(NULL, "sys.0", &clk_sys), + CLKDEV_INIT("mcftmr.0", NULL, &clk_sys), + CLKDEV_INIT("mcftmr.1", NULL, &clk_sys), + CLKDEV_INIT("mcfuart.0", NULL, &clk_sys), + CLKDEV_INIT("mcfuart.1", NULL, &clk_sys), + CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys), +}; + +/***************************************************************************/ + +static void __init m5307_i2c_init(void) +{ +#if IS_ENABLED(CONFIG_I2C_IMX) + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0, + MCFSIM_I2CICR); + mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C); +#endif /* IS_ENABLED(CONFIG_I2C_IMX) */ +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ +#if defined(CONFIG_NETtel) || \ + defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) + /* Copy command line from FLASH to local buffer... */ + memcpy(commandp, (char *) 0xf0004000, size); + commandp[size-1] = 0; +#endif + + mach_sched_init = hw_timer_init; + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(27, MCFINTC_EINT3); + mcf_mapirq2imr(29, MCFINTC_EINT5); + mcf_mapirq2imr(31, MCFINTC_EINT7); + +#ifdef CONFIG_BDM_DISABLE + /* + * Disable the BDM clocking. This also turns off most of the rest of + * the BDM device. This is good for EMC reasons. This option is not + * incompatible with the memory protection option. + */ + wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK); +#endif + m5307_i2c_init(); + + clkdev_add_table(m5307_clk_lookup, ARRAY_SIZE(m5307_clk_lookup)); +} + +/***************************************************************************/ |