diff options
Diffstat (limited to 'arch/m68k/kernel/head.S')
| -rw-r--r-- | arch/m68k/kernel/head.S | 3898 |
1 files changed, 3898 insertions, 0 deletions
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S new file mode 100644 index 0000000000..9e812d8606 --- /dev/null +++ b/arch/m68k/kernel/head.S @@ -0,0 +1,3898 @@ +/* -*- mode: asm -*- +** +** head.S -- This file contains the initial boot code for the +** Linux/68k kernel. +** +** Copyright 1993 by Hamish Macdonald +** +** 68040 fixes by Michael Rausch +** 68060 fixes by Roman Hodek +** MMU cleanup by Randy Thelen +** Final MMU cleanup by Roman Zippel +** +** Atari support by Andreas Schwab, using ideas of Robert de Vries +** and Bjoern Brauel +** VME Support by Richard Hirst +** +** 94/11/14 Andreas Schwab: put kernel at PAGESIZE +** 94/11/18 Andreas Schwab: remove identity mapping of STRAM for Atari +** ++ Bjoern & Roman: ATARI-68040 support for the Medusa +** 95/11/18 Richard Hirst: Added MVME166 support +** 96/04/26 Guenther Kelleter: fixed identity mapping for Falcon with +** Magnum- and FX-alternate ram +** 98/04/25 Phil Blundell: added HP300 support +** 1998/08/30 David Kilzer: Added support for font_desc structures +** for linux-2.1.115 +** 1999/02/11 Richard Zidlicky: added Q40 support (initial version 99/01/01) +** 2004/05/13 Kars de Jong: Finalised HP300 support +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file README.legal in the main directory of this archive +** for more details. +** +*/ + +/* + * Linux startup code. + * + * At this point, the boot loader has: + * Disabled interrupts + * Disabled caches + * Put us in supervisor state. + * + * The kernel setup code takes the following steps: + * . Raise interrupt level + * . Set up initial kernel memory mapping. + * . This sets up a mapping of the 4M of memory the kernel is located in. + * . It also does a mapping of any initial machine specific areas. + * . Enable the MMU + * . Enable cache memories + * . Jump to kernel startup + * + * Much of the file restructuring was to accomplish: + * 1) Remove register dependency through-out the file. + * 2) Increase use of subroutines to perform functions + * 3) Increase readability of the code + * + * Of course, readability is a subjective issue, so it will never be + * argued that that goal was accomplished. It was merely a goal. + * A key way to help make code more readable is to give good + * documentation. So, the first thing you will find is exhaustive + * write-ups on the structure of the file, and the features of the + * functional subroutines. + * + * General Structure: + * ------------------ + * Without a doubt the single largest chunk of head.S is spent + * mapping the kernel and I/O physical space into the logical range + * for the kernel. + * There are new subroutines and data structures to make MMU + * support cleaner and easier to understand. + * First, you will find a routine call "mmu_map" which maps + * a logical to a physical region for some length given a cache + * type on behalf of the caller. This routine makes writing the + * actual per-machine specific code very simple. + * A central part of the code, but not a subroutine in itself, + * is the mmu_init code which is broken down into mapping the kernel + * (the same for all machines) and mapping machine-specific I/O + * regions. + * Also, there will be a description of engaging the MMU and + * caches. + * You will notice that there is a chunk of code which + * can emit the entire MMU mapping of the machine. This is present + * only in debug modes and can be very helpful. + * Further, there is a new console driver in head.S that is + * also only engaged in debug mode. Currently, it's only supported + * on the Macintosh class of machines. However, it is hoped that + * others will plug-in support for specific machines. + * + * ###################################################################### + * + * mmu_map + * ------- + * mmu_map was written for two key reasons. First, it was clear + * that it was very difficult to read the previous code for mapping + * regions of memory. Second, the Macintosh required such extensive + * memory allocations that it didn't make sense to propagate the + * existing code any further. + * mmu_map requires some parameters: + * + * mmu_map (logical, physical, length, cache_type) + * + * While this essentially describes the function in the abstract, you'll + * find more indepth description of other parameters at the implementation site. + * + * mmu_get_root_table_entry + * ------------------------ + * mmu_get_ptr_table_entry + * ----------------------- + * mmu_get_page_table_entry + * ------------------------ + * + * These routines are used by other mmu routines to get a pointer into + * a table, if necessary a new table is allocated. These routines are working + * basically like pmd_alloc() and pte_alloc() in <asm/pgtable.h>. The root + * table needs of course only to be allocated once in mmu_get_root_table_entry, + * so that here also some mmu specific initialization is done. The second page + * at the start of the kernel (the first page is unmapped later) is used for + * the kernel_pg_dir. It must be at a position known at link time (as it's used + * to initialize the init task struct) and since it needs special cache + * settings, it's the easiest to use this page, the rest of the page is used + * for further pointer tables. + * mmu_get_page_table_entry allocates always a whole page for page tables, this + * means 1024 pages and so 4MB of memory can be mapped. It doesn't make sense + * to manage page tables in smaller pieces as nearly all mappings have that + * size. + * + * ###################################################################### + * + * + * ###################################################################### + * + * mmu_engage + * ---------- + * Thanks to a small helping routine enabling the mmu got quite simple + * and there is only one way left. mmu_engage makes a complete a new mapping + * that only includes the absolute necessary to be able to jump to the final + * position and to restore the original mapping. + * As this code doesn't need a transparent translation register anymore this + * means all registers are free to be used by machines that needs them for + * other purposes. + * + * ###################################################################### + * + * mmu_print + * --------- + * This algorithm will print out the page tables of the system as + * appropriate for an 030 or an 040. This is useful for debugging purposes + * and as such is enclosed in #ifdef MMU_PRINT/#endif clauses. + * + * ###################################################################### + * + * console_init + * ------------ + * The console is also able to be turned off. The console in head.S + * is specifically for debugging and can be very useful. It is surrounded by + * #ifdef / #endif clauses so it doesn't have to ship in known-good + * kernels. It's basic algorithm is to determine the size of the screen + * (in height/width and bit depth) and then use that information for + * displaying an 8x8 font or an 8x16 (widthxheight). I prefer the 8x8 for + * debugging so I can see more good data. But it was trivial to add support + * for both fonts, so I included it. + * Also, the algorithm for plotting pixels is abstracted so that in + * theory other platforms could add support for different kinds of frame + * buffers. This could be very useful. + * + * console_put_penguin + * ------------------- + * An important part of any Linux bring up is the penguin and there's + * nothing like getting the Penguin on the screen! This algorithm will work + * on any machine for which there is a console_plot_pixel. + * + * console_scroll + * -------------- + * My hope is that the scroll algorithm does the right thing on the + * various platforms, but it wouldn't be hard to add the test conditions + * and new code if it doesn't. + * + * console_putc + * ------------- + * + * ###################################################################### + * + * Register usage has greatly simplified within head.S. Every subroutine + * saves and restores all registers that it modifies (except it returns a + * value in there of course). So the only register that needs to be initialized + * is the stack pointer. + * All other init code and data is now placed in the init section, so it will + * be automatically freed at the end of the kernel initialization. + * + * ###################################################################### + * + * options + * ------- + * There are many options available in a build of this file. I've + * taken the time to describe them here to save you the time of searching + * for them and trying to understand what they mean. + * + * CONFIG_xxx: These are the obvious machine configuration defines created + * during configuration. These are defined in autoconf.h. + * + * CONSOLE_DEBUG: Only supports a Mac frame buffer but could easily be + * extended to support other platforms. + * + * TEST_MMU: This is a test harness for running on any given machine but + * getting an MMU dump for another class of machine. The classes of machines + * that can be tested are any of the makes (Atari, Amiga, Mac, VME, etc.) + * and any of the models (030, 040, 060, etc.). + * + * NOTE: TEST_MMU is NOT permanent! It is scheduled to be removed + * When head.S boots on Atari, Amiga, Macintosh, and VME + * machines. At that point the underlying logic will be + * believed to be solid enough to be trusted, and TEST_MMU + * can be dropped. Do note that that will clean up the + * head.S code significantly as large blocks of #if/#else + * clauses can be removed. + * + * MMU_NOCACHE_KERNEL: On the Macintosh platform there was an inquiry into + * determing why devices don't appear to work. A test case was to remove + * the cacheability of the kernel bits. + * + * MMU_PRINT: There is a routine built into head.S that can display the + * MMU data structures. It outputs its result through the serial_putc + * interface. So where ever that winds up driving data, that's where the + * mmu struct will appear. + * + * SERIAL_DEBUG: There are a series of putc() macro statements + * scattered through out the code to give progress of status to the + * person sitting at the console. This constant determines whether those + * are used. + * + * DEBUG: This is the standard DEBUG flag that can be set for building + * the kernel. It has the effect adding additional tests into + * the code. + * + * FONT_6x11: + * FONT_8x8: + * FONT_8x16: + * In theory these could be determined at run time or handed + * over by the booter. But, let's be real, it's a fine hard + * coded value. (But, you will notice the code is run-time + * flexible!) A pointer to the font's struct font_desc + * is kept locally in Lconsole_font. It is used to determine + * font size information dynamically. + * + * Atari constants: + * USE_PRINTER: Use the printer port for serial debug. + * USE_SCC_B: Use the SCC port A (Serial2) for serial debug. + * USE_SCC_A: Use the SCC port B (Modem2) for serial debug. + * USE_MFP: Use the ST-MFP port (Modem1) for serial debug. + * + * Macintosh constants: + * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug. + * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/pgtable.h> +#include <asm/bootinfo.h> +#include <asm/bootinfo-amiga.h> +#include <asm/bootinfo-atari.h> +#include <asm/bootinfo-hp300.h> +#include <asm/bootinfo-mac.h> +#include <asm/bootinfo-q40.h> +#include <asm/bootinfo-virt.h> +#include <asm/bootinfo-vme.h> +#include <asm/setup.h> +#include <asm/entry.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#ifdef CONFIG_MAC +# include <asm/machw.h> +#endif + +#ifdef CONFIG_EARLY_PRINTK +# define SERIAL_DEBUG +# if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT) +# define CONSOLE_DEBUG +# endif +#endif + +#undef MMU_PRINT +#undef MMU_NOCACHE_KERNEL +#undef DEBUG + +/* + * For the head.S console, there are three supported fonts, 6x11, 8x16 and 8x8. + * The 8x8 font is harder to read but fits more on the screen. + */ +#define FONT_8x8 /* default */ +/* #define FONT_8x16 */ /* 2nd choice */ +/* #define FONT_6x11 */ /* 3rd choice */ + +.globl kernel_pg_dir +.globl availmem +.globl m68k_init_mapped_size +.globl m68k_pgtable_cachemode +.globl m68k_supervisor_cachemode +#ifdef CONFIG_MVME16x +.globl mvme_bdid +#endif +#ifdef CONFIG_Q40 +.globl q40_mem_cptr +#endif + +CPUTYPE_040 = 1 /* indicates an 040 */ +CPUTYPE_060 = 2 /* indicates an 060 */ +CPUTYPE_0460 = 3 /* if either above are set, this is set */ +CPUTYPE_020 = 4 /* indicates an 020 */ + +/* Translation control register */ +TC_ENABLE = 0x8000 +TC_PAGE8K = 0x4000 +TC_PAGE4K = 0x0000 + +/* Transparent translation registers */ +TTR_ENABLE = 0x8000 /* enable transparent translation */ +TTR_ANYMODE = 0x4000 /* user and kernel mode access */ +TTR_KERNELMODE = 0x2000 /* only kernel mode access */ +TTR_USERMODE = 0x0000 /* only user mode access */ +TTR_CI = 0x0400 /* inhibit cache */ +TTR_RW = 0x0200 /* read/write mode */ +TTR_RWM = 0x0100 /* read/write mask */ +TTR_FCB2 = 0x0040 /* function code base bit 2 */ +TTR_FCB1 = 0x0020 /* function code base bit 1 */ +TTR_FCB0 = 0x0010 /* function code base bit 0 */ +TTR_FCM2 = 0x0004 /* function code mask bit 2 */ +TTR_FCM1 = 0x0002 /* function code mask bit 1 */ +TTR_FCM0 = 0x0001 /* function code mask bit 0 */ + +/* Cache Control registers */ +CC6_ENABLE_D = 0x80000000 /* enable data cache (680[46]0) */ +CC6_FREEZE_D = 0x40000000 /* freeze data cache (68060) */ +CC6_ENABLE_SB = 0x20000000 /* enable store buffer (68060) */ +CC6_PUSH_DPI = 0x10000000 /* disable CPUSH invalidation (68060) */ +CC6_HALF_D = 0x08000000 /* half-cache mode for data cache (68060) */ +CC6_ENABLE_B = 0x00800000 /* enable branch cache (68060) */ +CC6_CLRA_B = 0x00400000 /* clear all entries in branch cache (68060) */ +CC6_CLRU_B = 0x00200000 /* clear user entries in branch cache (68060) */ +CC6_ENABLE_I = 0x00008000 /* enable instruction cache (680[46]0) */ +CC6_FREEZE_I = 0x00004000 /* freeze instruction cache (68060) */ +CC6_HALF_I = 0x00002000 /* half-cache mode for instruction cache (68060) */ +CC3_ALLOC_WRITE = 0x00002000 /* write allocate mode(68030) */ +CC3_ENABLE_DB = 0x00001000 /* enable data burst (68030) */ +CC3_CLR_D = 0x00000800 /* clear data cache (68030) */ +CC3_CLRE_D = 0x00000400 /* clear entry in data cache (68030) */ +CC3_FREEZE_D = 0x00000200 /* freeze data cache (68030) */ +CC3_ENABLE_D = 0x00000100 /* enable data cache (68030) */ +CC3_ENABLE_IB = 0x00000010 /* enable instruction burst (68030) */ +CC3_CLR_I = 0x00000008 /* clear instruction cache (68030) */ +CC3_CLRE_I = 0x00000004 /* clear entry in instruction cache (68030) */ +CC3_FREEZE_I = 0x00000002 /* freeze instruction cache (68030) */ +CC3_ENABLE_I = 0x00000001 /* enable instruction cache (68030) */ + +/* Miscellaneous definitions */ +PAGESIZE = 4096 +PAGESHIFT = 12 + +ROOT_TABLE_SIZE = 128 +PTR_TABLE_SIZE = 128 +PAGE_TABLE_SIZE = 64 +ROOT_INDEX_SHIFT = 25 +PTR_INDEX_SHIFT = 18 +PAGE_INDEX_SHIFT = 12 + +#ifdef DEBUG +/* When debugging use readable names for labels */ +#ifdef __STDC__ +#define L(name) .head.S.##name +#else +#define L(name) .head.S./**/name +#endif +#else +#ifdef __STDC__ +#define L(name) .L##name +#else +#define L(name) .L/**/name +#endif +#endif + +/* The __INITDATA stuff is a no-op when ftrace or kgdb are turned on */ +#ifndef __INITDATA +#define __INITDATA .data +#define __FINIT .previous +#endif + +/* Several macros to make the writing of subroutines easier: + * - func_start marks the beginning of the routine which setups the frame + * register and saves the registers, it also defines another macro + * to automatically restore the registers again. + * - func_return marks the end of the routine and simply calls the prepared + * macro to restore registers and jump back to the caller. + * - func_define generates another macro to automatically put arguments + * onto the stack call the subroutine and cleanup the stack again. + */ + +/* Within subroutines these macros can be used to access the arguments + * on the stack. With STACK some allocated memory on the stack can be + * accessed and ARG0 points to the return address (used by mmu_engage). + */ +#define STACK %a6@(stackstart) +#define ARG0 %a6@(4) +#define ARG1 %a6@(8) +#define ARG2 %a6@(12) +#define ARG3 %a6@(16) +#define ARG4 %a6@(20) + +.macro func_start name,saveregs,stack=0 +L(\name): + linkw %a6,#-\stack + moveml \saveregs,%sp@- +.set stackstart,-\stack + +.macro func_return_\name + moveml %sp@+,\saveregs + unlk %a6 + rts +.endm +.endm + +.macro func_return name + func_return_\name +.endm + +.macro func_call name + jbsr L(\name) +.endm + +.macro move_stack nr,arg1,arg2,arg3,arg4 +.if \nr + move_stack "(\nr-1)",\arg2,\arg3,\arg4 + movel \arg1,%sp@- +.endif +.endm + +.macro func_define name,nr=0 +.macro \name arg1,arg2,arg3,arg4 + move_stack \nr,\arg1,\arg2,\arg3,\arg4 + func_call \name +.if \nr + lea %sp@(\nr*4),%sp +.endif +.endm +.endm + +func_define mmu_map,4 +func_define mmu_map_tt,4 +func_define mmu_fixup_page_mmu_cache,1 +func_define mmu_temp_map,2 +func_define mmu_engage +func_define mmu_get_root_table_entry,1 +func_define mmu_get_ptr_table_entry,2 +func_define mmu_get_page_table_entry,2 +func_define mmu_print +func_define get_new_page +#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO) +func_define set_leds +#endif + +.macro mmu_map_eq arg1,arg2,arg3 + mmu_map \arg1,\arg1,\arg2,\arg3 +.endm + +.macro get_bi_record record + pea \record + func_call get_bi_record + addql #4,%sp +.endm + +func_define serial_putc,1 +func_define console_putc,1 + +func_define console_init +func_define console_put_penguin +func_define console_plot_pixel,3 +func_define console_scroll + +.macro putc ch +#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG) + pea \ch +#endif +#ifdef CONSOLE_DEBUG + func_call console_putc +#endif +#ifdef SERIAL_DEBUG + func_call serial_putc +#endif +#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG) + addql #4,%sp +#endif +.endm + +.macro dputc ch +#ifdef DEBUG + putc \ch +#endif +.endm + +func_define putn,1 + +.macro dputn nr +#ifdef DEBUG + putn \nr +#endif +.endm + +.macro puts string +#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG) + __INITDATA +.Lstr\@: + .string "\string" + __FINIT + pea %pc@(.Lstr\@) + func_call puts + addql #4,%sp +#endif +.endm + +.macro dputs string +#ifdef DEBUG + puts "\string" +#endif +.endm + +#define is_not_amiga(lab) cmpl &MACH_AMIGA,%pc@(m68k_machtype); jne lab +#define is_not_atari(lab) cmpl &MACH_ATARI,%pc@(m68k_machtype); jne lab +#define is_not_mac(lab) cmpl &MACH_MAC,%pc@(m68k_machtype); jne lab +#define is_not_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jne lab +#define is_not_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jne lab +#define is_not_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jne lab +#define is_mvme147(lab) cmpl &MACH_MVME147,%pc@(m68k_machtype); jeq lab +#define is_mvme16x(lab) cmpl &MACH_MVME16x,%pc@(m68k_machtype); jeq lab +#define is_bvme6000(lab) cmpl &MACH_BVME6000,%pc@(m68k_machtype); jeq lab +#define is_not_hp300(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); jne lab +#define is_not_apollo(lab) cmpl &MACH_APOLLO,%pc@(m68k_machtype); jne lab +#define is_not_q40(lab) cmpl &MACH_Q40,%pc@(m68k_machtype); jne lab +#define is_not_sun3x(lab) cmpl &MACH_SUN3X,%pc@(m68k_machtype); jne lab +#define is_not_virt(lab) cmpl &MACH_VIRT,%pc@(m68k_machtype); jne lab + +#define hasnt_leds(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); \ + jeq 42f; \ + cmpl &MACH_APOLLO,%pc@(m68k_machtype); \ + jne lab ;\ + 42:\ + +#define is_040_or_060(lab) btst &CPUTYPE_0460,%pc@(L(cputype)+3); jne lab +#define is_not_040_or_060(lab) btst &CPUTYPE_0460,%pc@(L(cputype)+3); jeq lab +#define is_040(lab) btst &CPUTYPE_040,%pc@(L(cputype)+3); jne lab +#define is_060(lab) btst &CPUTYPE_060,%pc@(L(cputype)+3); jne lab +#define is_not_060(lab) btst &CPUTYPE_060,%pc@(L(cputype)+3); jeq lab +#define is_020(lab) btst &CPUTYPE_020,%pc@(L(cputype)+3); jne lab +#define is_not_020(lab) btst &CPUTYPE_020,%pc@(L(cputype)+3); jeq lab + +/* On the HP300 we use the on-board LEDs for debug output before + the console is running. Writing a 1 bit turns the corresponding LED + _off_ - on the 340 bit 7 is towards the back panel of the machine. */ +.macro leds mask +#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO) + hasnt_leds(.Lled\@) + pea \mask + func_call set_leds + addql #4,%sp +.Lled\@: +#endif +.endm + +__HEAD +ENTRY(_stext) +/* + * Version numbers of the bootinfo interface + * The area from _stext to _start will later be used as kernel pointer table + */ + bras 1f /* Jump over bootinfo version numbers */ + + .long BOOTINFOV_MAGIC + .long MACH_AMIGA, AMIGA_BOOTI_VERSION + .long MACH_ATARI, ATARI_BOOTI_VERSION + .long MACH_MVME147, MVME147_BOOTI_VERSION + .long MACH_MVME16x, MVME16x_BOOTI_VERSION + .long MACH_BVME6000, BVME6000_BOOTI_VERSION + .long MACH_MAC, MAC_BOOTI_VERSION + .long MACH_Q40, Q40_BOOTI_VERSION + .long MACH_HP300, HP300_BOOTI_VERSION + .long 0 +1: jra __start + +.equ kernel_pg_dir,_stext + +.equ .,_stext+PAGESIZE + +ENTRY(_start) + jra __start +__INIT +ENTRY(__start) +/* + * Setup initial stack pointer + */ + lea %pc@(_stext),%sp + +/* + * Record the CPU and machine type. + */ + get_bi_record BI_MACHTYPE + lea %pc@(m68k_machtype),%a1 + movel %a0@,%a1@ + + get_bi_record BI_FPUTYPE + lea %pc@(m68k_fputype),%a1 + movel %a0@,%a1@ + + get_bi_record BI_MMUTYPE + lea %pc@(m68k_mmutype),%a1 + movel %a0@,%a1@ + + get_bi_record BI_CPUTYPE + lea %pc@(m68k_cputype),%a1 + movel %a0@,%a1@ + + leds 0x1 + +#ifdef CONFIG_MAC +/* + * For Macintosh, we need to determine the display parameters early (at least + * while debugging it). + */ + + is_not_mac(L(test_notmac)) + + get_bi_record BI_MAC_VADDR + lea %pc@(L(mac_videobase)),%a1 + movel %a0@,%a1@ + + get_bi_record BI_MAC_VDEPTH + lea %pc@(L(mac_videodepth)),%a1 + movel %a0@,%a1@ + + get_bi_record BI_MAC_VDIM + lea %pc@(L(mac_dimensions)),%a1 + movel %a0@,%a1@ + + get_bi_record BI_MAC_VROW + lea %pc@(L(mac_rowbytes)),%a1 + movel %a0@,%a1@ + + get_bi_record BI_MAC_SCCBASE + lea %pc@(L(mac_sccbase)),%a1 + movel %a0@,%a1@ + +L(test_notmac): +#endif /* CONFIG_MAC */ + +#ifdef CONFIG_VIRT + is_not_virt(L(test_notvirt)) + + get_bi_record BI_VIRT_GF_TTY_BASE + lea %pc@(L(virt_gf_tty_base)),%a1 + movel %a0@,%a1@ +L(test_notvirt): +#endif /* CONFIG_VIRT */ + +/* + * There are ultimately two pieces of information we want for all kinds of + * processors CpuType and CacheBits. The CPUTYPE was passed in from booter + * and is converted here from a booter type definition to a separate bit + * number which allows for the standard is_0x0 macro tests. + */ + movel %pc@(m68k_cputype),%d0 + /* + * Assume it's an 030 + */ + clrl %d1 + + /* + * Test the BootInfo cputype for 060 + */ + btst #CPUB_68060,%d0 + jeq 1f + bset #CPUTYPE_060,%d1 + bset #CPUTYPE_0460,%d1 + jra 3f +1: + /* + * Test the BootInfo cputype for 040 + */ + btst #CPUB_68040,%d0 + jeq 2f + bset #CPUTYPE_040,%d1 + bset #CPUTYPE_0460,%d1 + jra 3f +2: + /* + * Test the BootInfo cputype for 020 + */ + btst #CPUB_68020,%d0 + jeq 3f + bset #CPUTYPE_020,%d1 + jra 3f +3: + /* + * Record the cpu type + */ + lea %pc@(L(cputype)),%a0 + movel %d1,%a0@ + + /* + * NOTE: + * + * Now the macros are valid: + * is_040_or_060 + * is_not_040_or_060 + * is_040 + * is_060 + * is_not_060 + */ + + /* + * Determine the cache mode for pages holding MMU tables + * and for supervisor mode, unused for '020 and '030 + */ + clrl %d0 + clrl %d1 + + is_not_040_or_060(L(save_cachetype)) + + /* + * '040 or '060 + * d1 := cacheable write-through + * NOTE: The 68040 manual strongly recommends non-cached for MMU tables, + * but we have been using write-through since at least 2.0.29 so I + * guess it is OK. + */ +#ifdef CONFIG_060_WRITETHROUGH + /* + * If this is a 68060 board using drivers with cache coherency + * problems, then supervisor memory accesses need to be write-through + * also; otherwise, we want copyback. + */ + + is_not_060(1f) + movel #_PAGE_CACHE040W,%d0 + jra L(save_cachetype) +#endif /* CONFIG_060_WRITETHROUGH */ +1: + movew #_PAGE_CACHE040,%d0 + + movel #_PAGE_CACHE040W,%d1 + +L(save_cachetype): + /* Save cache mode for supervisor mode and page tables + */ + lea %pc@(m68k_supervisor_cachemode),%a0 + movel %d0,%a0@ + lea %pc@(m68k_pgtable_cachemode),%a0 + movel %d1,%a0@ + +/* + * raise interrupt level + */ + movew #0x2700,%sr + +/* + If running on an Atari, determine the I/O base of the + serial port and test if we are running on a Medusa or Hades. + This test is necessary here, because on the Hades the serial + port is only accessible in the high I/O memory area. + + The test whether it is a Medusa is done by writing to the byte at + phys. 0x0. This should result in a bus error on all other machines. + + ...should, but doesn't. The Afterburner040 for the Falcon has the + same behaviour (0x0..0x7 are no ROM shadow). So we have to do + another test to distinguish Medusa and AB040. This is a + read attempt for 0x00ff82fe phys. that should bus error on a Falcon + (+AB040), but is in the range where the Medusa always asserts DTACK. + + The test for the Hades is done by reading address 0xb0000000. This + should give a bus error on the Medusa. + */ + +#ifdef CONFIG_ATARI + is_not_atari(L(notypetest)) + + /* get special machine type (Medusa/Hades/AB40) */ + moveq #0,%d3 /* default if tag doesn't exist */ + get_bi_record BI_ATARI_MCH_TYPE + tstl %d0 + jbmi 1f + movel %a0@,%d3 + lea %pc@(atari_mch_type),%a0 + movel %d3,%a0@ +1: + /* On the Hades, the iobase must be set up before opening the + * serial port. There are no I/O regs at 0x00ffxxxx at all. */ + moveq #0,%d0 + cmpl #ATARI_MACH_HADES,%d3 + jbne 1f + movel #0xff000000,%d0 /* Hades I/O base addr: 0xff000000 */ +1: lea %pc@(L(iobase)),%a0 + movel %d0,%a0@ + +L(notypetest): +#endif + +#ifdef CONFIG_VME + is_mvme147(L(getvmetype)) + is_bvme6000(L(getvmetype)) + is_not_mvme16x(L(gvtdone)) + + /* See if the loader has specified the BI_VME_TYPE tag. Recent + * versions of VMELILO and TFTPLILO do this. We have to do this + * early so we know how to handle console output. If the tag + * doesn't exist then we use the Bug for output on MVME16x. + */ +L(getvmetype): + get_bi_record BI_VME_TYPE + tstl %d0 + jbmi 1f + movel %a0@,%d3 + lea %pc@(vme_brdtype),%a0 + movel %d3,%a0@ +1: +#ifdef CONFIG_MVME16x + is_not_mvme16x(L(gvtdone)) + + /* Need to get the BRD_ID info to differentiate between 162, 167, + * etc. This is available as a BI_VME_BRDINFO tag with later + * versions of VMELILO and TFTPLILO, otherwise we call the Bug. + */ + get_bi_record BI_VME_BRDINFO + tstl %d0 + jpl 1f + + /* Get pointer to board ID data from Bug */ + movel %d2,%sp@- + trap #15 + .word 0x70 /* trap 0x70 - .BRD_ID */ + movel %sp@+,%a0 +1: + lea %pc@(mvme_bdid),%a1 + /* Structure is 32 bytes long */ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ + movel %a0@+,%a1@+ +#endif + +L(gvtdone): + +#endif + +#ifdef CONFIG_HP300 + is_not_hp300(L(nothp)) + + /* Get the address of the UART for serial debugging */ + get_bi_record BI_HP300_UART_ADDR + tstl %d0 + jbmi 1f + movel %a0@,%d3 + lea %pc@(L(uartbase)),%a0 + movel %d3,%a0@ + get_bi_record BI_HP300_UART_SCODE + tstl %d0 + jbmi 1f + movel %a0@,%d3 + lea %pc@(L(uart_scode)),%a0 + movel %d3,%a0@ +1: +L(nothp): +#endif + +/* + * Initialize serial port + */ + jbsr L(serial_init) + +/* + * Initialize console + */ +#ifdef CONFIG_MAC + is_not_mac(L(nocon)) +# ifdef CONSOLE_DEBUG + console_init +# ifdef CONFIG_LOGO + console_put_penguin +# endif /* CONFIG_LOGO */ +# endif /* CONSOLE_DEBUG */ +L(nocon): +#endif /* CONFIG_MAC */ + + + putc '\n' + putc 'A' + leds 0x2 + dputn %pc@(L(cputype)) + dputn %pc@(m68k_supervisor_cachemode) + dputn %pc@(m68k_pgtable_cachemode) + dputc '\n' + +/* + * Save physical start address of kernel + */ + lea %pc@(L(phys_kernel_start)),%a0 + lea %pc@(_stext),%a1 + subl #_stext,%a1 + addl #PAGE_OFFSET,%a1 + movel %a1,%a0@ + + putc 'B' + + leds 0x4 + +/* + * mmu_init + * + * This block of code does what's necessary to map in the various kinds + * of machines for execution of Linux. + * First map the first 4, 8, or 16 MB of kernel code & data + */ + + get_bi_record BI_MEMCHUNK + movel %a0@(4),%d0 + movel #16*1024*1024,%d1 + cmpl %d0,%d1 + jls 1f + lsrl #1,%d1 + cmpl %d0,%d1 + jls 1f + lsrl #1,%d1 +1: + lea %pc@(m68k_init_mapped_size),%a0 + movel %d1,%a0@ + mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\ + %pc@(m68k_supervisor_cachemode) + + putc 'C' + +#ifdef CONFIG_AMIGA + +L(mmu_init_amiga): + + is_not_amiga(L(mmu_init_not_amiga)) +/* + * mmu_init_amiga + */ + + putc 'D' + + is_not_040_or_060(1f) + + /* + * 040: Map the 16Meg range physical 0x0 up to logical 0x8000.0000 + */ + mmu_map #0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S + /* + * Map the Zorro III I/O space with transparent translation + * for frame buffer memory etc. + */ + mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE_S + + jbra L(mmu_init_done) + +1: + /* + * 030: Map the 32Meg range physical 0x0 up to logical 0x8000.0000 + */ + mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030 + mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030 + + jbra L(mmu_init_done) + +L(mmu_init_not_amiga): +#endif + +#ifdef CONFIG_ATARI + +L(mmu_init_atari): + + is_not_atari(L(mmu_init_not_atari)) + + putc 'E' + +/* On the Atari, we map the I/O region (phys. 0x00ffxxxx) by mapping + the last 16 MB of virtual address space to the first 16 MB (i.e. + 0xffxxxxxx -> 0x00xxxxxx). For this, an additional pointer table is + needed. I/O ranges are marked non-cachable. + + For the Medusa it is better to map the I/O region transparently + (i.e. 0xffxxxxxx -> 0xffxxxxxx), because some I/O registers are + accessible only in the high area. + + On the Hades all I/O registers are only accessible in the high + area. +*/ + + /* I/O base addr for non-Medusa, non-Hades: 0x00000000 */ + moveq #0,%d0 + movel %pc@(atari_mch_type),%d3 + cmpl #ATARI_MACH_MEDUSA,%d3 + jbeq 2f + cmpl #ATARI_MACH_HADES,%d3 + jbne 1f +2: movel #0xff000000,%d0 /* Medusa/Hades base addr: 0xff000000 */ +1: movel %d0,%d3 + + is_040_or_060(L(spata68040)) + + /* Map everything non-cacheable, though not all parts really + * need to disable caches (crucial only for 0xff8000..0xffffff + * (standard I/O) and 0xf00000..0xf3ffff (IDE)). The remainder + * isn't really used, except for sometimes peeking into the + * ROMs (mirror at phys. 0x0), so caching isn't necessary for + * this. */ + mmu_map #0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE030 + + jbra L(mmu_init_done) + +L(spata68040): + + mmu_map #0xff000000,%d3,#0x01000000,#_PAGE_NOCACHE_S + + jbra L(mmu_init_done) + +L(mmu_init_not_atari): +#endif + +#ifdef CONFIG_Q40 + is_not_q40(L(notq40)) + /* + * add transparent mapping for 0xff00 0000 - 0xffff ffff + * non-cached serialized etc.. + * this includes master chip, DAC, RTC and ISA ports + * 0xfe000000-0xfeffffff is for screen and ROM + */ + + putc 'Q' + + mmu_map_tt #0,#0xfe000000,#0x01000000,#_PAGE_CACHE040W + mmu_map_tt #1,#0xff000000,#0x01000000,#_PAGE_NOCACHE_S + + jbra L(mmu_init_done) + +L(notq40): +#endif + +#ifdef CONFIG_HP300 + is_not_hp300(L(nothp300)) + + /* On the HP300, we map the ROM, INTIO and DIO regions (phys. 0x00xxxxxx) + * by mapping 32MB (on 020/030) or 16 MB (on 040) from 0xf0xxxxxx -> 0x00xxxxxx). + * The ROM mapping is needed because the LEDs are mapped there too. + */ + + is_040(1f) + + /* + * 030: Map the 32Meg range physical 0x0 up to logical 0xf000.0000 + */ + mmu_map #0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030 + + jbra L(mmu_init_done) + +1: + /* + * 040: Map the 16Meg range physical 0x0 up to logical 0xf000.0000 + */ + mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S + + jbra L(mmu_init_done) + +L(nothp300): +#endif /* CONFIG_HP300 */ + +#ifdef CONFIG_MVME147 + + is_not_mvme147(L(not147)) + + /* + * On MVME147 we have already created kernel page tables for + * 4MB of RAM at address 0, so now need to do a transparent + * mapping of the top of memory space. Make it 0.5GByte for now, + * so we can access on-board i/o areas. + */ + + mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE030 + + jbra L(mmu_init_done) + +L(not147): +#endif /* CONFIG_MVME147 */ + +#ifdef CONFIG_MVME16x + + is_not_mvme16x(L(not16x)) + + /* + * On MVME16x we have already created kernel page tables for + * 4MB of RAM at address 0, so now need to do a transparent + * mapping of the top of memory space. Make it 0.5GByte for now. + * Supervisor only access, so transparent mapping doesn't + * clash with User code virtual address space. + * this covers IO devices, PROM and SRAM. The PROM and SRAM + * mapping is needed to allow 167Bug to run. + * IO is in the range 0xfff00000 to 0xfffeffff. + * PROM is 0xff800000->0xffbfffff and SRAM is + * 0xffe00000->0xffe1ffff. + */ + + mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S + + jbra L(mmu_init_done) + +L(not16x): +#endif /* CONFIG_MVME162 | CONFIG_MVME167 */ + +#ifdef CONFIG_BVME6000 + + is_not_bvme6000(L(not6000)) + + /* + * On BVME6000 we have already created kernel page tables for + * 4MB of RAM at address 0, so now need to do a transparent + * mapping of the top of memory space. Make it 0.5GByte for now, + * so we can access on-board i/o areas. + * Supervisor only access, so transparent mapping doesn't + * clash with User code virtual address space. + */ + + mmu_map_tt #1,#0xe0000000,#0x20000000,#_PAGE_NOCACHE_S + + jbra L(mmu_init_done) + +L(not6000): +#endif /* CONFIG_BVME6000 */ + +/* + * mmu_init_mac + * + * The Macintosh mappings are less clear. + * + * Even as of this writing, it is unclear how the + * Macintosh mappings will be done. However, as + * the first author of this code I'm proposing the + * following model: + * + * Map the kernel (that's already done), + * Map the I/O (on most machines that's the + * 0x5000.0000 ... 0x5300.0000 range, + * Map the video frame buffer using as few pages + * as absolutely (this requirement mostly stems from + * the fact that when the frame buffer is at + * 0x0000.0000 then we know there is valid RAM just + * above the screen that we don't want to waste!). + * + * By the way, if the frame buffer is at 0x0000.0000 + * then the Macintosh is known as an RBV based Mac. + * + * By the way 2, the code currently maps in a bunch of + * regions. But I'd like to cut that out. (And move most + * of the mappings up into the kernel proper ... or only + * map what's necessary.) + */ + +#ifdef CONFIG_MAC + +L(mmu_init_mac): + + is_not_mac(L(mmu_init_not_mac)) + + putc 'F' + + is_not_040_or_060(1f) + + moveq #_PAGE_NOCACHE_S,%d3 + jbra 2f +1: + moveq #_PAGE_NOCACHE030,%d3 +2: + /* + * Mac Note: screen address of logical 0xF000.0000 -> <screen physical> + * we simply map the 4MB that contains the videomem + */ + + movel #VIDEOMEMMASK,%d0 + andl %pc@(L(mac_videobase)),%d0 + + mmu_map #VIDEOMEMBASE,%d0,#VIDEOMEMSIZE,%d3 + /* ROM from 4000 0000 to 4200 0000 (only for mac_reset()) */ + mmu_map_eq #0x40000000,#0x02000000,%d3 + /* IO devices (incl. serial port) from 5000 0000 to 5300 0000 */ + mmu_map_eq #0x50000000,#0x03000000,%d3 + /* Nubus slot space (video at 0xF0000000, rom at 0xF0F80000) */ + mmu_map_tt #1,#0xf8000000,#0x08000000,%d3 + + jbra L(mmu_init_done) + +L(mmu_init_not_mac): +#endif + +#ifdef CONFIG_SUN3X + is_not_sun3x(L(notsun3x)) + + /* oh, the pain.. We're gonna want the prom code after + * starting the MMU, so we copy the mappings, translating + * from 8k -> 4k pages as we go. + */ + + /* copy maps from 0xfee00000 to 0xff000000 */ + movel #0xfee00000, %d0 + moveq #ROOT_INDEX_SHIFT, %d1 + lsrl %d1,%d0 + mmu_get_root_table_entry %d0 + + movel #0xfee00000, %d0 + moveq #PTR_INDEX_SHIFT, %d1 + lsrl %d1,%d0 + andl #PTR_TABLE_SIZE-1, %d0 + mmu_get_ptr_table_entry %a0,%d0 + + movel #0xfee00000, %d0 + moveq #PAGE_INDEX_SHIFT, %d1 + lsrl %d1,%d0 + andl #PAGE_TABLE_SIZE-1, %d0 + mmu_get_page_table_entry %a0,%d0 + + /* this is where the prom page table lives */ + movel 0xfefe00d4, %a1 + movel %a1@, %a1 + + movel #((0x200000 >> 13)-1), %d1 + +1: + movel %a1@+, %d3 + movel %d3,%a0@+ + addl #0x1000,%d3 + movel %d3,%a0@+ + + dbra %d1,1b + + /* setup tt1 for I/O */ + mmu_map_tt #1,#0x40000000,#0x40000000,#_PAGE_NOCACHE_S + jbra L(mmu_init_done) + +L(notsun3x): +#endif + +#ifdef CONFIG_VIRT + is_not_virt(L(novirt)) + mmu_map_tt #1,#0xFF000000,#0x01000000,#_PAGE_NOCACHE_S + jbra L(mmu_init_done) +L(novirt): +#endif + +#ifdef CONFIG_APOLLO + is_not_apollo(L(notapollo)) + + putc 'P' + mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030 + +L(notapollo): + jbra L(mmu_init_done) +#endif + +L(mmu_init_done): + + putc 'G' + leds 0x8 + +/* + * mmu_fixup + * + * On the 040 class machines, all pages that are used for the + * mmu have to be fixed up. According to Motorola, pages holding mmu + * tables should be non-cacheable on a '040 and write-through on a + * '060. But analysis of the reasons for this, and practical + * experience, showed that write-through also works on a '040. + * + * Allocated memory so far goes from kernel_end to memory_start that + * is used for all kind of tables, for that the cache attributes + * are now fixed. + */ +L(mmu_fixup): + + is_not_040_or_060(L(mmu_fixup_done)) + +#ifdef MMU_NOCACHE_KERNEL + jbra L(mmu_fixup_done) +#endif + + /* first fix the page at the start of the kernel, that + * contains also kernel_pg_dir. + */ + movel %pc@(L(phys_kernel_start)),%d0 + subl #PAGE_OFFSET,%d0 + lea %pc@(_stext),%a0 + subl %d0,%a0 + mmu_fixup_page_mmu_cache %a0 + + movel %pc@(L(kernel_end)),%a0 + subl %d0,%a0 + movel %pc@(L(memory_start)),%a1 + subl %d0,%a1 + bra 2f +1: + mmu_fixup_page_mmu_cache %a0 + addw #PAGESIZE,%a0 +2: + cmpl %a0,%a1 + jgt 1b + +L(mmu_fixup_done): + +#ifdef MMU_PRINT + mmu_print +#endif + +/* + * mmu_engage + * + * This chunk of code performs the gruesome task of engaging the MMU. + * The reason it's gruesome is because when the MMU becomes engaged it + * maps logical addresses to physical addresses. The Program Counter + * register is then passed through the MMU before the next instruction + * is fetched (the instruction following the engage MMU instruction). + * This may mean one of two things: + * 1. The Program Counter falls within the logical address space of + * the kernel of which there are two sub-possibilities: + * A. The PC maps to the correct instruction (logical PC == physical + * code location), or + * B. The PC does not map through and the processor will read some + * data (or instruction) which is not the logically next instr. + * As you can imagine, A is good and B is bad. + * Alternatively, + * 2. The Program Counter does not map through the MMU. The processor + * will take a Bus Error. + * Clearly, 2 is bad. + * It doesn't take a wiz kid to figure you want 1.A. + * This code creates that possibility. + * There are two possible 1.A. states (we now ignore the other above states): + * A. The kernel is located at physical memory addressed the same as + * the logical memory for the kernel, i.e., 0x01000. + * B. The kernel is located some where else. e.g., 0x0400.0000 + * + * Under some conditions the Macintosh can look like A or B. + * [A friend and I once noted that Apple hardware engineers should be + * wacked twice each day: once when they show up at work (as in, Whack!, + * "This is for the screwy hardware we know you're going to design today."), + * and also at the end of the day (as in, Whack! "I don't know what + * you designed today, but I'm sure it wasn't good."). -- rst] + * + * This code works on the following premise: + * If the kernel start (%d5) is within the first 16 Meg of RAM, + * then create a mapping for the kernel at logical 0x8000.0000 to + * the physical location of the pc. And, create a transparent + * translation register for the first 16 Meg. Then, after the MMU + * is engaged, the PC can be moved up into the 0x8000.0000 range + * and then the transparent translation can be turned off and then + * the PC can jump to the correct logical location and it will be + * home (finally). This is essentially the code that the Amiga used + * to use. Now, it's generalized for all processors. Which means + * that a fresh (but temporary) mapping has to be created. The mapping + * is made in page 0 (an as of yet unused location -- except for the + * stack!). This temporary mapping will only require 1 pointer table + * and a single page table (it can map 256K). + * + * OK, alternatively, imagine that the Program Counter is not within + * the first 16 Meg. Then, just use Transparent Translation registers + * to do the right thing. + * + * Last, if _start is already at 0x01000, then there's nothing special + * to do (in other words, in a degenerate case of the first case above, + * do nothing). + * + * Let's do it. + * + * + */ + + putc 'H' + + mmu_engage + +/* + * After this point no new memory is allocated and + * the start of available memory is stored in availmem. + * (The bootmem allocator requires now the physical address.) + */ + + movel L(memory_start),availmem + +#ifdef CONFIG_AMIGA + is_not_amiga(1f) + /* fixup the Amiga custom register location before printing */ + clrl L(custom) +1: +#endif + +#ifdef CONFIG_ATARI + is_not_atari(1f) + /* fixup the Atari iobase register location before printing */ + movel #0xff000000,L(iobase) +1: +#endif + +#ifdef CONFIG_MAC + is_not_mac(1f) + movel #~VIDEOMEMMASK,%d0 + andl L(mac_videobase),%d0 + addl #VIDEOMEMBASE,%d0 + movel %d0,L(mac_videobase) +#ifdef CONSOLE_DEBUG + movel %pc@(L(phys_kernel_start)),%d0 + subl #PAGE_OFFSET,%d0 + subl %d0,L(console_font) + subl %d0,L(console_font_data) +#endif + orl #0x50000000,L(mac_sccbase) +1: +#endif + +#ifdef CONFIG_HP300 + is_not_hp300(2f) + /* + * Fix up the iobase register to point to the new location of the LEDs. + */ + movel #0xf0000000,L(iobase) + + /* + * Energise the FPU and caches. + */ + is_040(1f) + movel #0x60,0xf05f400c + jbra 2f + + /* + * 040: slightly different, apparently. + */ +1: movew #0,0xf05f400e + movew #0x64,0xf05f400e +2: +#endif + +#ifdef CONFIG_SUN3X + is_not_sun3x(1f) + + /* enable copro */ + oriw #0x4000,0x61000000 +1: +#endif + +#ifdef CONFIG_APOLLO + is_not_apollo(1f) + + /* + * Fix up the iobase before printing + */ + movel #0x80000000,L(iobase) +1: +#endif + + putc 'I' + leds 0x10 + +/* + * Enable caches + */ + + is_not_040_or_060(L(cache_not_680460)) + +L(cache680460): + .chip 68040 + nop + cpusha %bc + nop + + is_060(L(cache68060)) + + movel #CC6_ENABLE_D+CC6_ENABLE_I,%d0 + /* MMU stuff works in copyback mode now, so enable the cache */ + movec %d0,%cacr + jra L(cache_done) + +L(cache68060): + movel #CC6_ENABLE_D+CC6_ENABLE_I+CC6_ENABLE_SB+CC6_PUSH_DPI+CC6_ENABLE_B+CC6_CLRA_B,%d0 + /* MMU stuff works in copyback mode now, so enable the cache */ + movec %d0,%cacr + /* enable superscalar dispatch in PCR */ + moveq #1,%d0 + .chip 68060 + movec %d0,%pcr + + jbra L(cache_done) +L(cache_not_680460): +L(cache68030): + .chip 68030 + movel #CC3_ENABLE_DB+CC3_CLR_D+CC3_ENABLE_D+CC3_ENABLE_IB+CC3_CLR_I+CC3_ENABLE_I,%d0 + movec %d0,%cacr + + jra L(cache_done) + .chip 68k +L(cache_done): + + putc 'J' + +/* + * Setup initial stack pointer + */ + lea init_task,%curptr + lea init_thread_union+THREAD_SIZE,%sp + + putc 'K' + + subl %a6,%a6 /* clear a6 for gdb */ + +/* + * The new 64bit printf support requires an early exception initialization. + */ + jbsr base_trap_init + +/* jump to the kernel start */ + + putc '\n' + leds 0x55 + + jbsr start_kernel + +/* + * Find a tag record in the bootinfo structure + * The bootinfo structure is located right after the kernel + * Returns: d0: size (-1 if not found) + * a0: data pointer (end-of-records if not found) + */ +func_start get_bi_record,%d1 + + movel ARG1,%d0 + lea %pc@(_end),%a0 +1: tstw %a0@(BIR_TAG) + jeq 3f + cmpw %a0@(BIR_TAG),%d0 + jeq 2f + addw %a0@(BIR_SIZE),%a0 + jra 1b +2: moveq #0,%d0 + movew %a0@(BIR_SIZE),%d0 + lea %a0@(BIR_DATA),%a0 + jra 4f +3: moveq #-1,%d0 + lea %a0@(BIR_SIZE),%a0 +4: +func_return get_bi_record + + +/* + * MMU Initialization Begins Here + * + * The structure of the MMU tables on the 68k machines + * is thus: + * Root Table + * Logical addresses are translated through + * a hierarchical translation mechanism where the high-order + * seven bits of the logical address (LA) are used as an + * index into the "root table." Each entry in the root + * table has a bit which specifies if it's a valid pointer to a + * pointer table. Each entry defines a 32Meg range of memory. + * If an entry is invalid then that logical range of 32M is + * invalid and references to that range of memory (when the MMU + * is enabled) will fault. If the entry is valid, then it does + * one of two things. On 040/060 class machines, it points to + * a pointer table which then describes more finely the memory + * within that 32M range. On 020/030 class machines, a technique + * called "early terminating descriptors" are used. This technique + * allows an entire 32Meg to be described by a single entry in the + * root table. Thus, this entry in the root table, contains the + * physical address of the memory or I/O at the logical address + * which the entry represents and it also contains the necessary + * cache bits for this region. + * + * Pointer Tables + * Per the Root Table, there will be one or more + * pointer tables. Each pointer table defines a 32M range. + * Not all of the 32M range need be defined. Again, the next + * seven bits of the logical address are used an index into + * the pointer table to point to page tables (if the pointer + * is valid). There will undoubtedly be more than one + * pointer table for the kernel because each pointer table + * defines a range of only 32M. Valid pointer table entries + * point to page tables, or are early terminating entries + * themselves. + * + * Page Tables + * Per the Pointer Tables, each page table entry points + * to the physical page in memory that supports the logical + * address that translates to the particular index. + * + * In short, the Logical Address gets translated as follows: + * bits 31..26 - index into the Root Table + * bits 25..18 - index into the Pointer Table + * bits 17..12 - index into the Page Table + * bits 11..0 - offset into a particular 4K page + * + * The algorithms which follow do one thing: they abstract + * the MMU hardware. For example, there are three kinds of + * cache settings that are relevant. Either, memory is + * being mapped in which case it is either Kernel Code (or + * the RamDisk) or it is MMU data. On the 030, the MMU data + * option also describes the kernel. Or, I/O is being mapped + * in which case it has its own kind of cache bits. There + * are constants which abstract these notions from the code that + * actually makes the call to map some range of memory. + * + * + * + */ + +#ifdef MMU_PRINT +/* + * mmu_print + * + * This algorithm will print out the current MMU mappings. + * + * Input: + * %a5 points to the root table. Everything else is calculated + * from this. + */ + +#define mmu_next_valid 0 +#define mmu_start_logical 4 +#define mmu_next_logical 8 +#define mmu_start_physical 12 +#define mmu_next_physical 16 + +#define MMU_PRINT_INVALID -1 +#define MMU_PRINT_VALID 1 +#define MMU_PRINT_UNINITED 0 + +#define putZc(z,n) jbne 1f; putc z; jbra 2f; 1: putc n; 2: + +func_start mmu_print,%a0-%a6/%d0-%d7 + + movel %pc@(L(kernel_pgdir_ptr)),%a5 + lea %pc@(L(mmu_print_data)),%a0 + movel #MMU_PRINT_UNINITED,%a0@(mmu_next_valid) + + is_not_040_or_060(mmu_030_print) + +mmu_040_print: + puts "\nMMU040\n" + puts "rp:" + putn %a5 + putc '\n' +#if 0 + /* + * The following #if/#endif block is a tight algorithm for dumping the 040 + * MMU Map in gory detail. It really isn't that practical unless the + * MMU Map algorithm appears to go awry and you need to debug it at the + * entry per entry level. + */ + movel #ROOT_TABLE_SIZE,%d5 +#if 0 + movel %a5@+,%d7 | Burn an entry to skip the kernel mappings, + subql #1,%d5 | they (might) work +#endif +1: tstl %d5 + jbeq mmu_print_done + subq #1,%d5 + movel %a5@+,%d7 + btst #1,%d7 + jbeq 1b + +2: putn %d7 + andil #0xFFFFFE00,%d7 + movel %d7,%a4 + movel #PTR_TABLE_SIZE,%d4 + putc ' ' +3: tstl %d4 + jbeq 11f + subq #1,%d4 + movel %a4@+,%d7 + btst #1,%d7 + jbeq 3b + +4: putn %d7 + andil #0xFFFFFF00,%d7 + movel %d7,%a3 + movel #PAGE_TABLE_SIZE,%d3 +5: movel #8,%d2 +6: tstl %d3 + jbeq 31f + subq #1,%d3 + movel %a3@+,%d6 + btst #0,%d6 + jbeq 6b +7: tstl %d2 + jbeq 8f + subq #1,%d2 + putc ' ' + jbra 91f +8: putc '\n' + movel #8+1+8+1+1,%d2 +9: putc ' ' + dbra %d2,9b + movel #7,%d2 +91: putn %d6 + jbra 6b + +31: putc '\n' + movel #8+1,%d2 +32: putc ' ' + dbra %d2,32b + jbra 3b + +11: putc '\n' + jbra 1b +#endif /* MMU 040 Dumping code that's gory and detailed */ + + lea %pc@(kernel_pg_dir),%a5 + movel %a5,%a0 /* a0 has the address of the root table ptr */ + movel #0x00000000,%a4 /* logical address */ + moveql #0,%d0 +40: + /* Increment the logical address and preserve in d5 */ + movel %a4,%d5 + addil #PAGESIZE<<13,%d5 + movel %a0@+,%d6 + btst #1,%d6 + jbne 41f + jbsr mmu_print_tuple_invalidate + jbra 48f +41: + movel #0,%d1 + andil #0xfffffe00,%d6 + movel %d6,%a1 +42: + movel %a4,%d5 + addil #PAGESIZE<<6,%d5 + movel %a1@+,%d6 + btst #1,%d6 + jbne 43f + jbsr mmu_print_tuple_invalidate + jbra 47f +43: + movel #0,%d2 + andil #0xffffff00,%d6 + movel %d6,%a2 +44: + movel %a4,%d5 + addil #PAGESIZE,%d5 + movel %a2@+,%d6 + btst #0,%d6 + jbne 45f + jbsr mmu_print_tuple_invalidate + jbra 46f +45: + moveml %d0-%d1,%sp@- + movel %a4,%d0 + movel %d6,%d1 + andil #0xfffff4e0,%d1 + lea %pc@(mmu_040_print_flags),%a6 + jbsr mmu_print_tuple + moveml %sp@+,%d0-%d1 +46: + movel %d5,%a4 + addq #1,%d2 + cmpib #64,%d2 + jbne 44b +47: + movel %d5,%a4 + addq #1,%d1 + cmpib #128,%d1 + jbne 42b +48: + movel %d5,%a4 /* move to the next logical address */ + addq #1,%d0 + cmpib #128,%d0 + jbne 40b + + .chip 68040 + movec %dtt1,%d0 + movel %d0,%d1 + andiw #0x8000,%d1 /* is it valid ? */ + jbeq 1f /* No, bail out */ + + movel %d0,%d1 + andil #0xff000000,%d1 /* Get the address */ + putn %d1 + puts "==" + putn %d1 + + movel %d0,%d6 + jbsr mmu_040_print_flags_tt +1: + movec %dtt0,%d0 + movel %d0,%d1 + andiw #0x8000,%d1 /* is it valid ? */ + jbeq 1f /* No, bail out */ + + movel %d0,%d1 + andil #0xff000000,%d1 /* Get the address */ + putn %d1 + puts "==" + putn %d1 + + movel %d0,%d6 + jbsr mmu_040_print_flags_tt +1: + .chip 68k + + jbra mmu_print_done + +mmu_040_print_flags: + btstl #10,%d6 + putZc(' ','G') /* global bit */ + btstl #7,%d6 + putZc(' ','S') /* supervisor bit */ +mmu_040_print_flags_tt: + btstl #6,%d6 + jbne 3f + putc 'C' + btstl #5,%d6 + putZc('w','c') /* write through or copy-back */ + jbra 4f +3: + putc 'N' + btstl #5,%d6 + putZc('s',' ') /* serialized non-cacheable, or non-cacheable */ +4: + rts + +mmu_030_print_flags: + btstl #6,%d6 + putZc('C','I') /* write through or copy-back */ + rts + +mmu_030_print: + puts "\nMMU030\n" + puts "\nrp:" + putn %a5 + putc '\n' + movel %a5,%d0 + andil #0xfffffff0,%d0 + movel %d0,%a0 + movel #0x00000000,%a4 /* logical address */ + movel #0,%d0 +30: + movel %a4,%d5 + addil #PAGESIZE<<13,%d5 + movel %a0@+,%d6 + btst #1,%d6 /* is it a table ptr? */ + jbne 31f /* yes */ + btst #0,%d6 /* is it early terminating? */ + jbeq 1f /* no */ + jbsr mmu_030_print_helper + jbra 38f +1: + jbsr mmu_print_tuple_invalidate + jbra 38f +31: + movel #0,%d1 + andil #0xfffffff0,%d6 + movel %d6,%a1 +32: + movel %a4,%d5 + addil #PAGESIZE<<6,%d5 + movel %a1@+,%d6 + btst #1,%d6 /* is it a table ptr? */ + jbne 33f /* yes */ + btst #0,%d6 /* is it a page descriptor? */ + jbeq 1f /* no */ + jbsr mmu_030_print_helper + jbra 37f +1: + jbsr mmu_print_tuple_invalidate + jbra 37f +33: + movel #0,%d2 + andil #0xfffffff0,%d6 + movel %d6,%a2 +34: + movel %a4,%d5 + addil #PAGESIZE,%d5 + movel %a2@+,%d6 + btst #0,%d6 + jbne 35f + jbsr mmu_print_tuple_invalidate + jbra 36f +35: + jbsr mmu_030_print_helper +36: + movel %d5,%a4 + addq #1,%d2 + cmpib #64,%d2 + jbne 34b +37: + movel %d5,%a4 + addq #1,%d1 + cmpib #128,%d1 + jbne 32b +38: + movel %d5,%a4 /* move to the next logical address */ + addq #1,%d0 + cmpib #128,%d0 + jbne 30b + +mmu_print_done: + puts "\n" + +func_return mmu_print + + +mmu_030_print_helper: + moveml %d0-%d1,%sp@- + movel %a4,%d0 + movel %d6,%d1 + lea %pc@(mmu_030_print_flags),%a6 + jbsr mmu_print_tuple + moveml %sp@+,%d0-%d1 + rts + +mmu_print_tuple_invalidate: + moveml %a0/%d7,%sp@- + + lea %pc@(L(mmu_print_data)),%a0 + tstl %a0@(mmu_next_valid) + jbmi mmu_print_tuple_invalidate_exit + + movel #MMU_PRINT_INVALID,%a0@(mmu_next_valid) + + putn %a4 + + puts "##\n" + +mmu_print_tuple_invalidate_exit: + moveml %sp@+,%a0/%d7 + rts + + +mmu_print_tuple: + moveml %d0-%d7/%a0,%sp@- + + lea %pc@(L(mmu_print_data)),%a0 + + tstl %a0@(mmu_next_valid) + jble mmu_print_tuple_print + + cmpl %a0@(mmu_next_physical),%d1 + jbeq mmu_print_tuple_increment + +mmu_print_tuple_print: + putn %d0 + puts "->" + putn %d1 + + movel %d1,%d6 + jbsr %a6@ + +mmu_print_tuple_record: + movel #MMU_PRINT_VALID,%a0@(mmu_next_valid) + + movel %d1,%a0@(mmu_next_physical) + +mmu_print_tuple_increment: + movel %d5,%d7 + subl %a4,%d7 + addl %d7,%a0@(mmu_next_physical) + +mmu_print_tuple_exit: + moveml %sp@+,%d0-%d7/%a0 + rts + +mmu_print_machine_cpu_types: + puts "machine: " + + is_not_amiga(1f) + puts "amiga" + jbra 9f +1: + is_not_atari(2f) + puts "atari" + jbra 9f +2: + is_not_mac(3f) + puts "macintosh" + jbra 9f +3: puts "unknown" +9: putc '\n' + + puts "cputype: 0" + is_not_060(1f) + putc '6' + jbra 9f +1: + is_not_040_or_060(2f) + putc '4' + jbra 9f +2: putc '3' +9: putc '0' + putc '\n' + + rts +#endif /* MMU_PRINT */ + +/* + * mmu_map_tt + * + * This is a specific function which works on all 680x0 machines. + * On 030, 040 & 060 it will attempt to use Transparent Translation + * registers (tt1). + * On 020 it will call the standard mmu_map which will use early + * terminating descriptors. + */ +func_start mmu_map_tt,%d0/%d1/%a0,4 + + dputs "mmu_map_tt:" + dputn ARG1 + dputn ARG2 + dputn ARG3 + dputn ARG4 + dputc '\n' + + is_020(L(do_map)) + + /* Extract the highest bit set + */ + bfffo ARG3{#0,#32},%d1 + cmpw #8,%d1 + jcc L(do_map) + + /* And get the mask + */ + moveq #-1,%d0 + lsrl %d1,%d0 + lsrl #1,%d0 + + /* Mask the address + */ + movel %d0,%d1 + notl %d1 + andl ARG2,%d1 + + /* Generate the upper 16bit of the tt register + */ + lsrl #8,%d0 + orl %d0,%d1 + clrw %d1 + + is_040_or_060(L(mmu_map_tt_040)) + + /* set 030 specific bits (read/write access for supervisor mode + * (highest function code set, lower two bits masked)) + */ + orw #TTR_ENABLE+TTR_RWM+TTR_FCB2+TTR_FCM1+TTR_FCM0,%d1 + movel ARG4,%d0 + btst #6,%d0 + jeq 1f + orw #TTR_CI,%d1 + +1: lea STACK,%a0 + dputn %d1 + movel %d1,%a0@ + .chip 68030 + tstl ARG1 + jne 1f + pmove %a0@,%tt0 + jra 2f +1: pmove %a0@,%tt1 +2: .chip 68k + jra L(mmu_map_tt_done) + + /* set 040 specific bits + */ +L(mmu_map_tt_040): + orw #TTR_ENABLE+TTR_KERNELMODE,%d1 + orl ARG4,%d1 + dputn %d1 + + .chip 68040 + tstl ARG1 + jne 1f + movec %d1,%itt0 + movec %d1,%dtt0 + jra 2f +1: movec %d1,%itt1 + movec %d1,%dtt1 +2: .chip 68k + + jra L(mmu_map_tt_done) + +L(do_map): + mmu_map_eq ARG2,ARG3,ARG4 + +L(mmu_map_tt_done): + +func_return mmu_map_tt + +/* + * mmu_map + * + * This routine will map a range of memory using a pointer + * table and allocate the pages on the fly from the kernel. + * The pointer table does not have to be already linked into + * the root table, this routine will do that if necessary. + * + * NOTE + * This routine will assert failure and use the serial_putc + * routines in the case of a run-time error. For example, + * if the address is already mapped. + * + * NOTE-2 + * This routine will use early terminating descriptors + * where possible for the 68020+68851 and 68030 type + * processors. + */ +func_start mmu_map,%d0-%d4/%a0-%a4 + + dputs "\nmmu_map:" + dputn ARG1 + dputn ARG2 + dputn ARG3 + dputn ARG4 + dputc '\n' + + /* Get logical address and round it down to 256KB + */ + movel ARG1,%d0 + andl #-(PAGESIZE*PAGE_TABLE_SIZE),%d0 + movel %d0,%a3 + + /* Get the end address + */ + movel ARG1,%a4 + addl ARG3,%a4 + subql #1,%a4 + + /* Get physical address and round it down to 256KB + */ + movel ARG2,%d0 + andl #-(PAGESIZE*PAGE_TABLE_SIZE),%d0 + movel %d0,%a2 + + /* Add page attributes to the physical address + */ + movel ARG4,%d0 + orw #_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0 + addw %d0,%a2 + + dputn %a2 + dputn %a3 + dputn %a4 + + is_not_040_or_060(L(mmu_map_030)) + + addw #_PAGE_GLOBAL040,%a2 +/* + * MMU 040 & 060 Support + * + * The MMU usage for the 040 and 060 is different enough from + * the 030 and 68851 that there is separate code. This comment + * block describes the data structures and algorithms built by + * this code. + * + * The 040 does not support early terminating descriptors, as + * the 030 does. Therefore, a third level of table is needed + * for the 040, and that would be the page table. In Linux, + * page tables are allocated directly from the memory above the + * kernel. + * + */ + +L(mmu_map_040): + /* Calculate the offset into the root table + */ + movel %a3,%d0 + moveq #ROOT_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + mmu_get_root_table_entry %d0 + + /* Calculate the offset into the pointer table + */ + movel %a3,%d0 + moveq #PTR_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PTR_TABLE_SIZE-1,%d0 + mmu_get_ptr_table_entry %a0,%d0 + + /* Calculate the offset into the page table + */ + movel %a3,%d0 + moveq #PAGE_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PAGE_TABLE_SIZE-1,%d0 + mmu_get_page_table_entry %a0,%d0 + + /* The page table entry must not no be busy + */ + tstl %a0@ + jne L(mmu_map_error) + + /* Do the mapping and advance the pointers + */ + movel %a2,%a0@ +2: + addw #PAGESIZE,%a2 + addw #PAGESIZE,%a3 + + /* Ready with mapping? + */ + lea %a3@(-1),%a0 + cmpl %a0,%a4 + jhi L(mmu_map_040) + jra L(mmu_map_done) + +L(mmu_map_030): + /* Calculate the offset into the root table + */ + movel %a3,%d0 + moveq #ROOT_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + mmu_get_root_table_entry %d0 + + /* Check if logical address 32MB aligned, + * so we can try to map it once + */ + movel %a3,%d0 + andl #(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1)&(-ROOT_TABLE_SIZE),%d0 + jne 1f + + /* Is there enough to map for 32MB at once + */ + lea %a3@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE-1),%a1 + cmpl %a1,%a4 + jcs 1f + + addql #1,%a1 + + /* The root table entry must not no be busy + */ + tstl %a0@ + jne L(mmu_map_error) + + /* Do the mapping and advance the pointers + */ + dputs "early term1" + dputn %a2 + dputn %a3 + dputn %a1 + dputc '\n' + movel %a2,%a0@ + + movel %a1,%a3 + lea %a2@(PTR_TABLE_SIZE*PAGE_TABLE_SIZE*PAGESIZE),%a2 + jra L(mmu_mapnext_030) +1: + /* Calculate the offset into the pointer table + */ + movel %a3,%d0 + moveq #PTR_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PTR_TABLE_SIZE-1,%d0 + mmu_get_ptr_table_entry %a0,%d0 + + /* The pointer table entry must not no be busy + */ + tstl %a0@ + jne L(mmu_map_error) + + /* Do the mapping and advance the pointers + */ + dputs "early term2" + dputn %a2 + dputn %a3 + dputc '\n' + movel %a2,%a0@ + + addl #PAGE_TABLE_SIZE*PAGESIZE,%a2 + addl #PAGE_TABLE_SIZE*PAGESIZE,%a3 + +L(mmu_mapnext_030): + /* Ready with mapping? + */ + lea %a3@(-1),%a0 + cmpl %a0,%a4 + jhi L(mmu_map_030) + jra L(mmu_map_done) + +L(mmu_map_error): + + dputs "mmu_map error:" + dputn %a2 + dputn %a3 + dputc '\n' + +L(mmu_map_done): + +func_return mmu_map + +/* + * mmu_fixup + * + * On the 040 class machines, all pages that are used for the + * mmu have to be fixed up. + */ + +func_start mmu_fixup_page_mmu_cache,%d0/%a0 + + dputs "mmu_fixup_page_mmu_cache" + dputn ARG1 + + /* Calculate the offset into the root table + */ + movel ARG1,%d0 + moveq #ROOT_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + mmu_get_root_table_entry %d0 + + /* Calculate the offset into the pointer table + */ + movel ARG1,%d0 + moveq #PTR_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PTR_TABLE_SIZE-1,%d0 + mmu_get_ptr_table_entry %a0,%d0 + + /* Calculate the offset into the page table + */ + movel ARG1,%d0 + moveq #PAGE_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PAGE_TABLE_SIZE-1,%d0 + mmu_get_page_table_entry %a0,%d0 + + movel %a0@,%d0 + andil #_CACHEMASK040,%d0 + orl %pc@(m68k_pgtable_cachemode),%d0 + movel %d0,%a0@ + + dputc '\n' + +func_return mmu_fixup_page_mmu_cache + +/* + * mmu_temp_map + * + * create a temporary mapping to enable the mmu, + * this we don't need any transparation translation tricks. + */ + +func_start mmu_temp_map,%d0/%d1/%a0/%a1 + + dputs "mmu_temp_map" + dputn ARG1 + dputn ARG2 + dputc '\n' + + lea %pc@(L(temp_mmap_mem)),%a1 + + /* Calculate the offset in the root table + */ + movel ARG2,%d0 + moveq #ROOT_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + mmu_get_root_table_entry %d0 + + /* Check if the table is temporary allocated, so we have to reuse it + */ + movel %a0@,%d0 + cmpl %pc@(L(memory_start)),%d0 + jcc 1f + + /* Temporary allocate a ptr table and insert it into the root table + */ + movel %a1@,%d0 + addl #PTR_TABLE_SIZE*4,%a1@ + orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0 + movel %d0,%a0@ + dputs " (new)" +1: + dputn %d0 + /* Mask the root table entry for the ptr table + */ + andw #-ROOT_TABLE_SIZE,%d0 + movel %d0,%a0 + + /* Calculate the offset into the pointer table + */ + movel ARG2,%d0 + moveq #PTR_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PTR_TABLE_SIZE-1,%d0 + lea %a0@(%d0*4),%a0 + dputn %a0 + + /* Check if a temporary page table is already allocated + */ + movel %a0@,%d0 + jne 1f + + /* Temporary allocate a page table and insert it into the ptr table + */ + movel %a1@,%d0 + /* The 512 should be PAGE_TABLE_SIZE*4, but that violates the + alignment restriction for pointer tables on the '0[46]0. */ + addl #512,%a1@ + orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0 + movel %d0,%a0@ + dputs " (new)" +1: + dputn %d0 + /* Mask the ptr table entry for the page table + */ + andw #-PTR_TABLE_SIZE,%d0 + movel %d0,%a0 + + /* Calculate the offset into the page table + */ + movel ARG2,%d0 + moveq #PAGE_INDEX_SHIFT,%d1 + lsrl %d1,%d0 + andl #PAGE_TABLE_SIZE-1,%d0 + lea %a0@(%d0*4),%a0 + dputn %a0 + + /* Insert the address into the page table + */ + movel ARG1,%d0 + andw #-PAGESIZE,%d0 + orw #_PAGE_PRESENT+_PAGE_ACCESSED+_PAGE_DIRTY,%d0 + movel %d0,%a0@ + dputn %d0 + + dputc '\n' + +func_return mmu_temp_map + +func_start mmu_engage,%d0-%d2/%a0-%a3 + + moveq #ROOT_TABLE_SIZE-1,%d0 + /* Temporarily use a different root table. */ + lea %pc@(L(kernel_pgdir_ptr)),%a0 + movel %a0@,%a2 + movel %pc@(L(memory_start)),%a1 + movel %a1,%a0@ + movel %a2,%a0 +1: + movel %a0@+,%a1@+ + dbra %d0,1b + + lea %pc@(L(temp_mmap_mem)),%a0 + movel %a1,%a0@ + + movew #PAGESIZE-1,%d0 +1: + clrl %a1@+ + dbra %d0,1b + + lea %pc@(1b),%a0 + movel #1b,%a1 + /* Skip temp mappings if phys == virt */ + cmpl %a0,%a1 + jeq 1f + + mmu_temp_map %a0,%a0 + mmu_temp_map %a0,%a1 + + addw #PAGESIZE,%a0 + addw #PAGESIZE,%a1 + mmu_temp_map %a0,%a0 + mmu_temp_map %a0,%a1 +1: + movel %pc@(L(memory_start)),%a3 + movel %pc@(L(phys_kernel_start)),%d2 + + is_not_040_or_060(L(mmu_engage_030)) + +L(mmu_engage_040): + .chip 68040 + nop + cinva %bc + nop + pflusha + nop + movec %a3,%srp + movel #TC_ENABLE+TC_PAGE4K,%d0 + movec %d0,%tc /* enable the MMU */ + jmp 1f:l +1: nop + movec %a2,%srp + nop + cinva %bc + nop + pflusha + .chip 68k + jra L(mmu_engage_cleanup) + +L(mmu_engage_030_temp): + .space 12 +L(mmu_engage_030): + .chip 68030 + lea %pc@(L(mmu_engage_030_temp)),%a0 + movel #0x80000002,%a0@ + movel %a3,%a0@(4) + movel #0x0808,%d0 + movec %d0,%cacr + pmove %a0@,%srp + pflusha + /* + * enable,super root enable,4096 byte pages,7 bit root index, + * 7 bit pointer index, 6 bit page table index. + */ + movel #0x82c07760,%a0@(8) + pmove %a0@(8),%tc /* enable the MMU */ + jmp 1f:l +1: movel %a2,%a0@(4) + movel #0x0808,%d0 + movec %d0,%cacr + pmove %a0@,%srp + pflusha + .chip 68k + +L(mmu_engage_cleanup): + subl #PAGE_OFFSET,%d2 + subl %d2,%a2 + movel %a2,L(kernel_pgdir_ptr) + subl %d2,%fp + subl %d2,%sp + subl %d2,ARG0 + +func_return mmu_engage + +func_start mmu_get_root_table_entry,%d0/%a1 + +#if 0 + dputs "mmu_get_root_table_entry:" + dputn ARG1 + dputs " =" +#endif + + movel %pc@(L(kernel_pgdir_ptr)),%a0 + tstl %a0 + jne 2f + + dputs "\nmmu_init:" + + /* Find the start of free memory, get_bi_record does this for us, + * as the bootinfo structure is located directly behind the kernel + * we simply search for the last entry. + */ + get_bi_record BI_LAST + addw #PAGESIZE-1,%a0 + movel %a0,%d0 + andw #-PAGESIZE,%d0 + + dputn %d0 + + lea %pc@(L(memory_start)),%a0 + movel %d0,%a0@ + lea %pc@(L(kernel_end)),%a0 + movel %d0,%a0@ + + /* we have to return the first page at _stext since the init code + * in mm/init.c simply expects kernel_pg_dir there, the rest of + * page is used for further ptr tables in get_ptr_table. + */ + lea %pc@(_stext),%a0 + lea %pc@(L(mmu_cached_pointer_tables)),%a1 + movel %a0,%a1@ + addl #ROOT_TABLE_SIZE*4,%a1@ + + lea %pc@(L(mmu_num_pointer_tables)),%a1 + addql #1,%a1@ + + /* clear the page + */ + movel %a0,%a1 + movew #PAGESIZE/4-1,%d0 +1: + clrl %a1@+ + dbra %d0,1b + + lea %pc@(L(kernel_pgdir_ptr)),%a1 + movel %a0,%a1@ + + dputn %a0 + dputc '\n' +2: + movel ARG1,%d0 + lea %a0@(%d0*4),%a0 + +#if 0 + dputn %a0 + dputc '\n' +#endif + +func_return mmu_get_root_table_entry + + + +func_start mmu_get_ptr_table_entry,%d0/%a1 + +#if 0 + dputs "mmu_get_ptr_table_entry:" + dputn ARG1 + dputn ARG2 + dputs " =" +#endif + + movel ARG1,%a0 + movel %a0@,%d0 + jne 2f + + /* Keep track of the number of pointer tables we use + */ + dputs "\nmmu_get_new_ptr_table:" + lea %pc@(L(mmu_num_pointer_tables)),%a0 + movel %a0@,%d0 + addql #1,%a0@ + + /* See if there is a free pointer table in our cache of pointer tables + */ + lea %pc@(L(mmu_cached_pointer_tables)),%a1 + andw #7,%d0 + jne 1f + + /* Get a new pointer table page from above the kernel memory + */ + get_new_page + movel %a0,%a1@ +1: + /* There is an unused pointer table in our cache... use it + */ + movel %a1@,%d0 + addl #PTR_TABLE_SIZE*4,%a1@ + + dputn %d0 + dputc '\n' + + /* Insert the new pointer table into the root table + */ + movel ARG1,%a0 + orw #_PAGE_TABLE+_PAGE_ACCESSED,%d0 + movel %d0,%a0@ +2: + /* Extract the pointer table entry + */ + andw #-PTR_TABLE_SIZE,%d0 + movel %d0,%a0 + movel ARG2,%d0 + lea %a0@(%d0*4),%a0 + +#if 0 + dputn %a0 + dputc '\n' +#endif + +func_return mmu_get_ptr_table_entry + + +func_start mmu_get_page_table_entry,%d0/%a1 + +#if 0 + dputs "mmu_get_page_table_entry:" + dputn ARG1 + dputn ARG2 + dputs " =" +#endif + + movel ARG1,%a0 + movel %a0@,%d0 + jne 2f + + /* If the page table entry doesn't exist, we allocate a complete new + * page and use it as one continuous big page table which can cover + * 4MB of memory, nearly almost all mappings have that alignment. + */ + get_new_page + addw #_PAGE_TABLE+_PAGE_ACCESSED,%a0 + + /* align pointer table entry for a page of page tables + */ + movel ARG1,%d0 + andw #-(PAGESIZE/PAGE_TABLE_SIZE),%d0 + movel %d0,%a1 + + /* Insert the page tables into the pointer entries + */ + moveq #PAGESIZE/PAGE_TABLE_SIZE/4-1,%d0 +1: + movel %a0,%a1@+ + lea %a0@(PAGE_TABLE_SIZE*4),%a0 + dbra %d0,1b + + /* Now we can get the initialized pointer table entry + */ + movel ARG1,%a0 + movel %a0@,%d0 +2: + /* Extract the page table entry + */ + andw #-PAGE_TABLE_SIZE,%d0 + movel %d0,%a0 + movel ARG2,%d0 + lea %a0@(%d0*4),%a0 + +#if 0 + dputn %a0 + dputc '\n' +#endif + +func_return mmu_get_page_table_entry + +/* + * get_new_page + * + * Return a new page from the memory start and clear it. + */ +func_start get_new_page,%d0/%a1 + + dputs "\nget_new_page:" + + /* allocate the page and adjust memory_start + */ + lea %pc@(L(memory_start)),%a0 + movel %a0@,%a1 + addl #PAGESIZE,%a0@ + + /* clear the new page + */ + movel %a1,%a0 + movew #PAGESIZE/4-1,%d0 +1: + clrl %a1@+ + dbra %d0,1b + + dputn %a0 + dputc '\n' + +func_return get_new_page + + + +/* + * Debug output support + * Atarians have a choice between the parallel port, the serial port + * from the MFP or a serial port of the SCC + */ + +#ifdef CONFIG_MAC +/* You may define either or both of these. */ +#define MAC_USE_SCC_A /* Modem port */ +#define MAC_USE_SCC_B /* Printer port */ + +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) +/* Initialisation table for SCC with 3.6864 MHz PCLK */ +L(scc_initable_mac): + .byte 4,0x44 /* x16, 1 stopbit, no parity */ + .byte 3,0xc0 /* receiver: 8 bpc */ + .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */ + .byte 10,0 /* NRZ */ + .byte 11,0x50 /* use baud rate generator */ + .byte 12,1,13,0 /* 38400 baud */ + .byte 14,1 /* Baud rate generator enable */ + .byte 3,0xc1 /* enable receiver */ + .byte 5,0xea /* enable transmitter */ + .byte -1 + .even +#endif +#endif /* CONFIG_MAC */ + +#ifdef CONFIG_ATARI +/* #define USE_PRINTER */ +/* #define USE_SCC_B */ +/* #define USE_SCC_A */ +#define USE_MFP + +#if defined(USE_SCC_A) || defined(USE_SCC_B) +/* Initialisation table for SCC with 7.9872 MHz PCLK */ +/* PCLK == 8.0539 gives baud == 9680.1 */ +L(scc_initable_atari): + .byte 4,0x44 /* x16, 1 stopbit, no parity */ + .byte 3,0xc0 /* receiver: 8 bpc */ + .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */ + .byte 10,0 /* NRZ */ + .byte 11,0x50 /* use baud rate generator */ + .byte 12,24,13,0 /* 9600 baud */ + .byte 14,2,14,3 /* use master clock for BRG, enable */ + .byte 3,0xc1 /* enable receiver */ + .byte 5,0xea /* enable transmitter */ + .byte -1 + .even +#endif + +#ifdef USE_PRINTER + +LPSG_SELECT = 0xff8800 +LPSG_READ = 0xff8800 +LPSG_WRITE = 0xff8802 +LPSG_IO_A = 14 +LPSG_IO_B = 15 +LPSG_CONTROL = 7 +LSTMFP_GPIP = 0xfffa01 +LSTMFP_DDR = 0xfffa05 +LSTMFP_IERB = 0xfffa09 + +#elif defined(USE_SCC_B) + +LSCC_CTRL = 0xff8c85 +LSCC_DATA = 0xff8c87 + +#elif defined(USE_SCC_A) + +LSCC_CTRL = 0xff8c81 +LSCC_DATA = 0xff8c83 + +#elif defined(USE_MFP) + +LMFP_UCR = 0xfffa29 +LMFP_TDCDR = 0xfffa1d +LMFP_TDDR = 0xfffa25 +LMFP_TSR = 0xfffa2d +LMFP_UDR = 0xfffa2f + +#endif +#endif /* CONFIG_ATARI */ + +/* + * Serial port output support. + */ + +/* + * Initialize serial port hardware + */ +func_start serial_init,%d0/%d1/%a0/%a1 + /* + * Some of the register usage that follows + * CONFIG_AMIGA + * a0 = pointer to boot info record + * d0 = boot info offset + * CONFIG_ATARI + * a0 = address of SCC + * a1 = Liobase address/address of scc_initable_atari + * d0 = init data for serial port + * CONFIG_MAC + * a0 = address of SCC + * a1 = address of scc_initable_mac + * d0 = init data for serial port + */ + +#ifdef CONFIG_AMIGA +#define SERIAL_DTR 7 +#define SERIAL_CNTRL CIABBASE+C_PRA + + is_not_amiga(1f) + lea %pc@(L(custom)),%a0 + movel #-ZTWOBASE,%a0@ + bclr #SERIAL_DTR,SERIAL_CNTRL-ZTWOBASE + get_bi_record BI_AMIGA_SERPER + movew %a0@,CUSTOMBASE+C_SERPER-ZTWOBASE +| movew #61,CUSTOMBASE+C_SERPER-ZTWOBASE +1: +#endif + +#ifdef CONFIG_ATARI + is_not_atari(4f) + movel %pc@(L(iobase)),%a1 +#if defined(USE_PRINTER) + bclr #0,%a1@(LSTMFP_IERB) + bclr #0,%a1@(LSTMFP_DDR) + moveb #LPSG_CONTROL,%a1@(LPSG_SELECT) + moveb #0xff,%a1@(LPSG_WRITE) + moveb #LPSG_IO_B,%a1@(LPSG_SELECT) + clrb %a1@(LPSG_WRITE) + moveb #LPSG_IO_A,%a1@(LPSG_SELECT) + moveb %a1@(LPSG_READ),%d0 + bset #5,%d0 + moveb %d0,%a1@(LPSG_WRITE) +#elif defined(USE_SCC_A) || defined(USE_SCC_B) + lea %a1@(LSCC_CTRL),%a0 + /* Reset SCC register pointer */ + moveb %a0@,%d0 + /* Reset SCC device: write register pointer then register value */ + moveb #9,%a0@ + moveb #0xc0,%a0@ + /* Wait for 5 PCLK cycles, which is about 63 CPU cycles */ + /* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */ + movel #32,%d0 +2: + subq #1,%d0 + jne 2b + /* Initialize channel */ + lea %pc@(L(scc_initable_atari)),%a1 +2: moveb %a1@+,%d0 + jmi 3f + moveb %d0,%a0@ + moveb %a1@+,%a0@ + jra 2b +3: clrb %a0@ +#elif defined(USE_MFP) + bclr #1,%a1@(LMFP_TSR) + moveb #0x88,%a1@(LMFP_UCR) + andb #0x70,%a1@(LMFP_TDCDR) + moveb #2,%a1@(LMFP_TDDR) + orb #1,%a1@(LMFP_TDCDR) + bset #1,%a1@(LMFP_TSR) +#endif + jra L(serial_init_done) +4: +#endif + +#ifdef CONFIG_MAC + is_not_mac(L(serial_init_not_mac)) +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) +#define mac_scc_cha_b_ctrl_offset 0x0 +#define mac_scc_cha_a_ctrl_offset 0x2 +#define mac_scc_cha_b_data_offset 0x4 +#define mac_scc_cha_a_data_offset 0x6 + movel %pc@(L(mac_sccbase)),%a0 + /* Reset SCC register pointer */ + moveb %a0@(mac_scc_cha_a_ctrl_offset),%d0 + /* Reset SCC device: write register pointer then register value */ + moveb #9,%a0@(mac_scc_cha_a_ctrl_offset) + moveb #0xc0,%a0@(mac_scc_cha_a_ctrl_offset) + /* Wait for 5 PCLK cycles, which is about 68 CPU cycles */ + /* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */ + movel #35,%d0 +5: + subq #1,%d0 + jne 5b +#endif +#ifdef MAC_USE_SCC_A + /* Initialize channel A */ + lea %pc@(L(scc_initable_mac)),%a1 +5: moveb %a1@+,%d0 + jmi 6f + moveb %d0,%a0@(mac_scc_cha_a_ctrl_offset) + moveb %a1@+,%a0@(mac_scc_cha_a_ctrl_offset) + jra 5b +6: +#endif /* MAC_USE_SCC_A */ +#ifdef MAC_USE_SCC_B + /* Initialize channel B */ + lea %pc@(L(scc_initable_mac)),%a1 +7: moveb %a1@+,%d0 + jmi 8f + moveb %d0,%a0@(mac_scc_cha_b_ctrl_offset) + moveb %a1@+,%a0@(mac_scc_cha_b_ctrl_offset) + jra 7b +8: +#endif /* MAC_USE_SCC_B */ + jra L(serial_init_done) +L(serial_init_not_mac): +#endif /* CONFIG_MAC */ + +#ifdef CONFIG_Q40 + is_not_q40(2f) +/* debug output goes into SRAM, so we don't do it unless requested + - check for '%LX$' signature in SRAM */ + lea %pc@(q40_mem_cptr),%a1 + move.l #0xff020010,%a1@ /* must be inited - also used by debug=mem */ + move.l #0xff020000,%a1 + cmp.b #'%',%a1@ + bne 2f /*nodbg*/ + addq.w #4,%a1 + cmp.b #'L',%a1@ + bne 2f /*nodbg*/ + addq.w #4,%a1 + cmp.b #'X',%a1@ + bne 2f /*nodbg*/ + addq.w #4,%a1 + cmp.b #'$',%a1@ + bne 2f /*nodbg*/ + /* signature OK */ + lea %pc@(L(q40_do_debug)),%a1 + tas %a1@ +/*nodbg: q40_do_debug is 0 by default*/ +2: +#endif + +#ifdef CONFIG_MVME16x + is_not_mvme16x(L(serial_init_not_mvme16x)) + moveb #0x10,M167_PCSCCMICR + moveb #0x10,M167_PCSCCTICR + moveb #0x10,M167_PCSCCRICR + jra L(serial_init_done) +L(serial_init_not_mvme16x): +#endif + +#ifdef CONFIG_APOLLO +/* We count on the PROM initializing SIO1 */ +#endif + +#ifdef CONFIG_HP300 +/* We count on the boot loader initialising the UART */ +#endif + +L(serial_init_done): +func_return serial_init + +/* + * Output character on serial port. + */ +func_start serial_putc,%d0/%d1/%a0/%a1 + + movel ARG1,%d0 + cmpib #'\n',%d0 + jbne 1f + + /* A little safe recursion is good for the soul */ + serial_putc #'\r' +1: + +#ifdef CONFIG_AMIGA + is_not_amiga(2f) + andw #0x00ff,%d0 + oriw #0x0100,%d0 + movel %pc@(L(custom)),%a0 + movew %d0,%a0@(CUSTOMBASE+C_SERDAT) +1: movew %a0@(CUSTOMBASE+C_SERDATR),%d0 + andw #0x2000,%d0 + jeq 1b + jra L(serial_putc_done) +2: +#endif + +#ifdef CONFIG_MAC + is_not_mac(5f) +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) + movel %pc@(L(mac_sccbase)),%a1 +#endif +#ifdef MAC_USE_SCC_A +3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset) + jeq 3b + moveb %d0,%a1@(mac_scc_cha_a_data_offset) +#endif /* MAC_USE_SCC_A */ +#ifdef MAC_USE_SCC_B +4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset) + jeq 4b + moveb %d0,%a1@(mac_scc_cha_b_data_offset) +#endif /* MAC_USE_SCC_B */ + jra L(serial_putc_done) +5: +#endif /* CONFIG_MAC */ + +#ifdef CONFIG_ATARI + is_not_atari(4f) + movel %pc@(L(iobase)),%a1 +#if defined(USE_PRINTER) +3: btst #0,%a1@(LSTMFP_GPIP) + jne 3b + moveb #LPSG_IO_B,%a1@(LPSG_SELECT) + moveb %d0,%a1@(LPSG_WRITE) + moveb #LPSG_IO_A,%a1@(LPSG_SELECT) + moveb %a1@(LPSG_READ),%d0 + bclr #5,%d0 + moveb %d0,%a1@(LPSG_WRITE) + nop + nop + bset #5,%d0 + moveb %d0,%a1@(LPSG_WRITE) +#elif defined(USE_SCC_A) || defined(USE_SCC_B) +3: btst #2,%a1@(LSCC_CTRL) + jeq 3b + moveb %d0,%a1@(LSCC_DATA) +#elif defined(USE_MFP) +3: btst #7,%a1@(LMFP_TSR) + jeq 3b + moveb %d0,%a1@(LMFP_UDR) +#endif + jra L(serial_putc_done) +4: +#endif /* CONFIG_ATARI */ + +#ifdef CONFIG_MVME147 + is_not_mvme147(2f) +1: btst #2,M147_SCC_CTRL_A + jeq 1b + moveb %d0,M147_SCC_DATA_A + jbra L(serial_putc_done) +2: +#endif + +#ifdef CONFIG_MVME16x + is_not_mvme16x(2f) + /* + * If the loader gave us a board type then we can use that to + * select an appropriate output routine; otherwise we just use + * the Bug code. If we have to use the Bug that means the Bug + * workspace has to be valid, which means the Bug has to use + * the SRAM, which is non-standard. + */ + moveml %d0-%d7/%a2-%a6,%sp@- + movel vme_brdtype,%d1 + jeq 1f | No tag - use the Bug + cmpi #VME_TYPE_MVME162,%d1 + jeq 6f + cmpi #VME_TYPE_MVME172,%d1 + jne 5f + /* 162/172; it's an SCC */ +6: btst #2,M162_SCC_CTRL_A + nop + nop + nop + jeq 6b + moveb #8,M162_SCC_CTRL_A + nop + nop + nop + moveb %d0,M162_SCC_CTRL_A + jra 3f +5: + /* 166/167/177; it's a CD2401 */ + moveb #0,M167_CYCAR + moveb M167_CYIER,%d2 + moveb #0x02,M167_CYIER +7: + btst #5,M167_PCSCCTICR + jeq 7b + moveb M167_PCTPIACKR,%d1 + moveb M167_CYLICR,%d1 + jeq 8f + moveb #0x08,M167_CYTEOIR + jra 7b +8: + moveb %d0,M167_CYTDR + moveb #0,M167_CYTEOIR + moveb %d2,M167_CYIER + jra 3f +1: + moveb %d0,%sp@- + trap #15 + .word 0x0020 /* TRAP 0x020 */ +3: + moveml %sp@+,%d0-%d7/%a2-%a6 + jbra L(serial_putc_done) +2: +#endif /* CONFIG_MVME16x */ + +#ifdef CONFIG_BVME6000 + is_not_bvme6000(2f) + /* + * The BVME6000 machine has a serial port ... + */ +1: btst #2,BVME_SCC_CTRL_A + jeq 1b + moveb %d0,BVME_SCC_DATA_A + jbra L(serial_putc_done) +2: +#endif + +#ifdef CONFIG_SUN3X + is_not_sun3x(2f) + movel %d0,-(%sp) + movel 0xFEFE0018,%a1 + jbsr (%a1) + addq #4,%sp + jbra L(serial_putc_done) +2: +#endif + +#ifdef CONFIG_Q40 + is_not_q40(2f) + tst.l %pc@(L(q40_do_debug)) /* only debug if requested */ + beq 2f + lea %pc@(q40_mem_cptr),%a1 + move.l %a1@,%a0 + move.b %d0,%a0@ + addq.l #4,%a0 + move.l %a0,%a1@ + jbra L(serial_putc_done) +2: +#endif + +#ifdef CONFIG_APOLLO + is_not_apollo(2f) + movl %pc@(L(iobase)),%a1 + moveb %d0,%a1@(LTHRB0) +1: moveb %a1@(LSRB0),%d0 + andb #0x4,%d0 + beq 1b + jbra L(serial_putc_done) +2: +#endif + +#ifdef CONFIG_HP300 + is_not_hp300(3f) + movl %pc@(L(iobase)),%a1 + addl %pc@(L(uartbase)),%a1 + movel %pc@(L(uart_scode)),%d1 /* Check the scode */ + jmi 3f /* Unset? Exit */ + cmpi #256,%d1 /* APCI scode? */ + jeq 2f +1: moveb %a1@(DCALSR),%d1 /* Output to DCA */ + andb #0x20,%d1 + beq 1b + moveb %d0,%a1@(DCADATA) + jbra L(serial_putc_done) +2: moveb %a1@(APCILSR),%d1 /* Output to APCI */ + andb #0x20,%d1 + beq 2b + moveb %d0,%a1@(APCIDATA) + jbra L(serial_putc_done) +3: +#endif + +#ifdef CONFIG_VIRT + is_not_virt(1f) + + movel L(virt_gf_tty_base),%a1 + movel %d0,%a1@(GF_PUT_CHAR) +1: +#endif + +L(serial_putc_done): +func_return serial_putc + +/* + * Output a string. + */ +func_start puts,%d0/%a0 + + movel ARG1,%a0 + jra 2f +1: +#ifdef CONSOLE_DEBUG + console_putc %d0 +#endif +#ifdef SERIAL_DEBUG + serial_putc %d0 +#endif +2: moveb %a0@+,%d0 + jne 1b + +func_return puts + +/* + * Output number in hex notation. + */ + +func_start putn,%d0-%d2 + + putc ' ' + + movel ARG1,%d0 + moveq #7,%d1 +1: roll #4,%d0 + move %d0,%d2 + andb #0x0f,%d2 + addb #'0',%d2 + cmpb #'9',%d2 + jls 2f + addb #'A'-('9'+1),%d2 +2: +#ifdef CONSOLE_DEBUG + console_putc %d2 +#endif +#ifdef SERIAL_DEBUG + serial_putc %d2 +#endif + dbra %d1,1b + +func_return putn + +#ifdef CONFIG_EARLY_PRINTK +/* + * This routine takes its parameters on the stack. It then + * turns around and calls the internal routines. This routine + * is used by the boot console. + * + * The calling parameters are: + * void debug_cons_nputs(const char *str, unsigned length) + * + * This routine does NOT understand variable arguments only + * simple strings! + */ +ENTRY(debug_cons_nputs) + moveml %d0/%d1/%a0,%sp@- + movew %sr,%sp@- + ori #0x0700,%sr + movel %sp@(18),%a0 /* fetch parameter */ + movel %sp@(22),%d1 /* fetch parameter */ + jra 2f +1: +#ifdef CONSOLE_DEBUG + console_putc %d0 +#endif +#ifdef SERIAL_DEBUG + serial_putc %d0 +#endif + subq #1,%d1 +2: jeq 3f + moveb %a0@+,%d0 + jne 1b +3: + movew %sp@+,%sr + moveml %sp@+,%d0/%d1/%a0 + rts +#endif /* CONFIG_EARLY_PRINTK */ + +#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO) +func_start set_leds,%d0/%a0 + movel ARG1,%d0 +#ifdef CONFIG_HP300 + is_not_hp300(1f) + movel %pc@(L(iobase)),%a0 + moveb %d0,%a0@(0x1ffff) + jra 2f +#endif +1: +#ifdef CONFIG_APOLLO + movel %pc@(L(iobase)),%a0 + lsll #8,%d0 + eorw #0xff00,%d0 + moveb %d0,%a0@(LCPUCTRL) +#endif +2: +func_return set_leds +#endif + +#ifdef CONSOLE_DEBUG +/* + * For continuity, see the data alignment + * to which this structure is tied. + */ +#define Lconsole_struct_cur_column 0 +#define Lconsole_struct_cur_row 4 +#define Lconsole_struct_num_columns 8 +#define Lconsole_struct_num_rows 12 +#define Lconsole_struct_left_edge 16 + +func_start console_init,%a0-%a4/%d0-%d7 + /* + * Some of the register usage that follows + * a0 = pointer to boot_info + * a1 = pointer to screen + * a2 = pointer to console_globals + * d3 = pixel width of screen + * d4 = pixel height of screen + * (d3,d4) ~= (x,y) of a point just below + * and to the right of the screen + * NOT on the screen! + * d5 = number of bytes per scan line + * d6 = number of bytes on the entire screen + */ + + lea %pc@(L(console_globals)),%a2 + movel %pc@(L(mac_videobase)),%a1 + movel %pc@(L(mac_rowbytes)),%d5 + movel %pc@(L(mac_dimensions)),%d3 /* -> low byte */ + movel %d3,%d4 + swap %d4 /* -> high byte */ + andl #0xffff,%d3 /* d3 = screen width in pixels */ + andl #0xffff,%d4 /* d4 = screen height in pixels */ + + movel %d5,%d6 +| subl #20,%d6 + mulul %d4,%d6 /* scan line bytes x num scan lines */ + divul #8,%d6 /* we'll clear 8 bytes at a time */ + moveq #-1,%d0 /* Mac_black */ + subq #1,%d6 + +L(console_clear_loop): + movel %d0,%a1@+ + movel %d0,%a1@+ + dbra %d6,L(console_clear_loop) + + /* Calculate font size */ + +#if defined(FONT_8x8) && defined(CONFIG_FONT_8x8) + lea %pc@(font_vga_8x8),%a0 +#elif defined(FONT_8x16) && defined(CONFIG_FONT_8x16) + lea %pc@(font_vga_8x16),%a0 +#elif defined(FONT_6x11) && defined(CONFIG_FONT_6x11) + lea %pc@(font_vga_6x11),%a0 +#elif defined(CONFIG_FONT_8x8) /* default */ + lea %pc@(font_vga_8x8),%a0 +#else /* no compiled-in font */ + lea 0,%a0 +#endif + + /* + * At this point we make a shift in register usage + * a1 = address of console_font pointer + */ + lea %pc@(L(console_font)),%a1 + movel %a0,%a1@ /* store pointer to struct fbcon_font_desc in console_font */ + tstl %a0 + jeq 1f + lea %pc@(L(console_font_data)),%a4 + movel %a0@(FONT_DESC_DATA),%d0 + subl #L(console_font),%a1 + addl %a1,%d0 + movel %d0,%a4@ + + /* + * Calculate global maxs + * Note - we can use either an + * 8 x 16 or 8 x 8 character font + * 6 x 11 also supported + */ + /* ASSERT: a0 = contents of Lconsole_font */ + movel %d3,%d0 /* screen width in pixels */ + divul %a0@(FONT_DESC_WIDTH),%d0 /* d0 = max num chars per row */ + + movel %d4,%d1 /* screen height in pixels */ + divul %a0@(FONT_DESC_HEIGHT),%d1 /* d1 = max num rows */ + + movel %d0,%a2@(Lconsole_struct_num_columns) + movel %d1,%a2@(Lconsole_struct_num_rows) + + /* + * Clear the current row and column + */ + clrl %a2@(Lconsole_struct_cur_column) + clrl %a2@(Lconsole_struct_cur_row) + clrl %a2@(Lconsole_struct_left_edge) + + /* + * Initialization is complete + */ +1: +func_return console_init + +#ifdef CONFIG_LOGO +func_start console_put_penguin,%a0-%a1/%d0-%d7 + /* + * Get 'that_penguin' onto the screen in the upper right corner + * penguin is 64 x 74 pixels, align against right edge of screen + */ + lea %pc@(L(mac_dimensions)),%a0 + movel %a0@,%d0 + andil #0xffff,%d0 + subil #64,%d0 /* snug up against the right edge */ + clrl %d1 /* start at the top */ + movel #73,%d7 + lea %pc@(L(that_penguin)),%a1 +L(console_penguin_row): + movel #31,%d6 +L(console_penguin_pixel_pair): + moveb %a1@,%d2 + lsrb #4,%d2 + console_plot_pixel %d0,%d1,%d2 + addq #1,%d0 + moveb %a1@+,%d2 + console_plot_pixel %d0,%d1,%d2 + addq #1,%d0 + dbra %d6,L(console_penguin_pixel_pair) + + subil #64,%d0 + addq #1,%d1 + dbra %d7,L(console_penguin_row) + +func_return console_put_penguin + +/* include penguin bitmap */ +L(that_penguin): +#include "../mac/mac_penguin.S" +#endif + + /* + * Calculate source and destination addresses + * output a1 = dest + * a2 = source + */ + +func_start console_scroll,%a0-%a4/%d0-%d7 + lea %pc@(L(mac_videobase)),%a0 + movel %a0@,%a1 + movel %a1,%a2 + lea %pc@(L(mac_rowbytes)),%a0 + movel %a0@,%d5 + movel %pc@(L(console_font)),%a0 + tstl %a0 + jeq 1f + mulul %a0@(FONT_DESC_HEIGHT),%d5 /* account for # scan lines per character */ + addal %d5,%a2 + + /* + * Get dimensions + */ + lea %pc@(L(mac_dimensions)),%a0 + movel %a0@,%d3 + movel %d3,%d4 + swap %d4 + andl #0xffff,%d3 /* d3 = screen width in pixels */ + andl #0xffff,%d4 /* d4 = screen height in pixels */ + + /* + * Calculate number of bytes to move + */ + lea %pc@(L(mac_rowbytes)),%a0 + movel %a0@,%d6 + movel %pc@(L(console_font)),%a0 + subl %a0@(FONT_DESC_HEIGHT),%d4 /* we're not scrolling the top row! */ + mulul %d4,%d6 /* scan line bytes x num scan lines */ + divul #32,%d6 /* we'll move 8 longs at a time */ + subq #1,%d6 + +L(console_scroll_loop): + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + movel %a2@+,%a1@+ + dbra %d6,L(console_scroll_loop) + + lea %pc@(L(mac_rowbytes)),%a0 + movel %a0@,%d6 + movel %pc@(L(console_font)),%a0 + mulul %a0@(FONT_DESC_HEIGHT),%d6 /* scan line bytes x font height */ + divul #32,%d6 /* we'll move 8 words at a time */ + subq #1,%d6 + + moveq #-1,%d0 +L(console_scroll_clear_loop): + movel %d0,%a1@+ + movel %d0,%a1@+ + movel %d0,%a1@+ + movel %d0,%a1@+ + movel %d0,%a1@+ + movel %d0,%a1@+ + movel %d0,%a1@+ + movel %d0,%a1@+ + dbra %d6,L(console_scroll_clear_loop) + +1: +func_return console_scroll + + +func_start console_putc,%a0/%a1/%d0-%d7 + + is_not_mac(L(console_exit)) + tstl %pc@(L(console_font)) + jeq L(console_exit) + + /* Output character in d7 on console. + */ + movel ARG1,%d7 + cmpib #'\n',%d7 + jbne 1f + + /* A little safe recursion is good for the soul */ + console_putc #'\r' +1: + lea %pc@(L(console_globals)),%a0 + + cmpib #10,%d7 + jne L(console_not_lf) + movel %a0@(Lconsole_struct_cur_row),%d0 + addil #1,%d0 + movel %d0,%a0@(Lconsole_struct_cur_row) + movel %a0@(Lconsole_struct_num_rows),%d1 + cmpl %d1,%d0 + jcs 1f + subil #1,%d0 + movel %d0,%a0@(Lconsole_struct_cur_row) + console_scroll +1: + jra L(console_exit) + +L(console_not_lf): + cmpib #13,%d7 + jne L(console_not_cr) + clrl %a0@(Lconsole_struct_cur_column) + jra L(console_exit) + +L(console_not_cr): + cmpib #1,%d7 + jne L(console_not_home) + clrl %a0@(Lconsole_struct_cur_row) + clrl %a0@(Lconsole_struct_cur_column) + jra L(console_exit) + +/* + * At this point we know that the %d7 character is going to be + * rendered on the screen. Register usage is - + * a0 = pointer to console globals + * a1 = font data + * d0 = cursor column + * d1 = cursor row to draw the character + * d7 = character number + */ +L(console_not_home): + movel %a0@(Lconsole_struct_cur_column),%d0 + addql #1,%a0@(Lconsole_struct_cur_column) + movel %a0@(Lconsole_struct_num_columns),%d1 + cmpl %d1,%d0 + jcs 1f + console_putc #'\n' /* recursion is OK! */ +1: + movel %a0@(Lconsole_struct_cur_row),%d1 + + /* + * At this point we make a shift in register usage + * a0 = address of pointer to font data (fbcon_font_desc) + */ + movel %pc@(L(console_font)),%a0 + movel %pc@(L(console_font_data)),%a1 /* Load fbcon_font_desc.data into a1 */ + andl #0x000000ff,%d7 + /* ASSERT: a0 = contents of Lconsole_font */ + mulul %a0@(FONT_DESC_HEIGHT),%d7 /* d7 = index into font data */ + addl %d7,%a1 /* a1 = points to char image */ + + /* + * At this point we make a shift in register usage + * d0 = pixel coordinate, x + * d1 = pixel coordinate, y + * d2 = (bit 0) 1/0 for white/black (!) pixel on screen + * d3 = font scan line data (8 pixels) + * d6 = count down for the font's pixel width (8) + * d7 = count down for the font's pixel count in height + */ + /* ASSERT: a0 = contents of Lconsole_font */ + mulul %a0@(FONT_DESC_WIDTH),%d0 + mulul %a0@(FONT_DESC_HEIGHT),%d1 + movel %a0@(FONT_DESC_HEIGHT),%d7 /* Load fbcon_font_desc.height into d7 */ + subq #1,%d7 +L(console_read_char_scanline): + moveb %a1@+,%d3 + + /* ASSERT: a0 = contents of Lconsole_font */ + movel %a0@(FONT_DESC_WIDTH),%d6 /* Load fbcon_font_desc.width into d6 */ + subql #1,%d6 + +L(console_do_font_scanline): + lslb #1,%d3 + scsb %d2 /* convert 1 bit into a byte */ + console_plot_pixel %d0,%d1,%d2 + addq #1,%d0 + dbra %d6,L(console_do_font_scanline) + + /* ASSERT: a0 = contents of Lconsole_font */ + subl %a0@(FONT_DESC_WIDTH),%d0 + addq #1,%d1 + dbra %d7,L(console_read_char_scanline) + +L(console_exit): +func_return console_putc + + /* + * Input: + * d0 = x coordinate + * d1 = y coordinate + * d2 = (bit 0) 1/0 for white/black (!) + * All registers are preserved + */ +func_start console_plot_pixel,%a0-%a1/%d0-%d4 + + movel %pc@(L(mac_videobase)),%a1 + movel %pc@(L(mac_videodepth)),%d3 + movel ARG1,%d0 + movel ARG2,%d1 + mulul %pc@(L(mac_rowbytes)),%d1 + movel ARG3,%d2 + + /* + * Register usage: + * d0 = x coord becomes byte offset into frame buffer + * d1 = y coord + * d2 = black or white (0/1) + * d3 = video depth + * d4 = temp of x (d0) for many bit depths + */ +L(test_1bit): + cmpb #1,%d3 + jbne L(test_2bit) + movel %d0,%d4 /* we need the low order 3 bits! */ + divul #8,%d0 + addal %d0,%a1 + addal %d1,%a1 + andb #7,%d4 + eorb #7,%d4 /* reverse the x-coordinate w/ screen-bit # */ + andb #1,%d2 + jbne L(white_1) + bsetb %d4,%a1@ + jbra L(console_plot_pixel_exit) +L(white_1): + bclrb %d4,%a1@ + jbra L(console_plot_pixel_exit) + +L(test_2bit): + cmpb #2,%d3 + jbne L(test_4bit) + movel %d0,%d4 /* we need the low order 2 bits! */ + divul #4,%d0 + addal %d0,%a1 + addal %d1,%a1 + andb #3,%d4 + eorb #3,%d4 /* reverse the x-coordinate w/ screen-bit # */ + lsll #1,%d4 /* ! */ + andb #1,%d2 + jbne L(white_2) + bsetb %d4,%a1@ + addq #1,%d4 + bsetb %d4,%a1@ + jbra L(console_plot_pixel_exit) +L(white_2): + bclrb %d4,%a1@ + addq #1,%d4 + bclrb %d4,%a1@ + jbra L(console_plot_pixel_exit) + +L(test_4bit): + cmpb #4,%d3 + jbne L(test_8bit) + movel %d0,%d4 /* we need the low order bit! */ + divul #2,%d0 + addal %d0,%a1 + addal %d1,%a1 + andb #1,%d4 + eorb #1,%d4 + lsll #2,%d4 /* ! */ + andb #1,%d2 + jbne L(white_4) + bsetb %d4,%a1@ + addq #1,%d4 + bsetb %d4,%a1@ + addq #1,%d4 + bsetb %d4,%a1@ + addq #1,%d4 + bsetb %d4,%a1@ + jbra L(console_plot_pixel_exit) +L(white_4): + bclrb %d4,%a1@ + addq #1,%d4 + bclrb %d4,%a1@ + addq #1,%d4 + bclrb %d4,%a1@ + addq #1,%d4 + bclrb %d4,%a1@ + jbra L(console_plot_pixel_exit) + +L(test_8bit): + cmpb #8,%d3 + jbne L(test_16bit) + addal %d0,%a1 + addal %d1,%a1 + andb #1,%d2 + jbne L(white_8) + moveb #0xff,%a1@ + jbra L(console_plot_pixel_exit) +L(white_8): + clrb %a1@ + jbra L(console_plot_pixel_exit) + +L(test_16bit): + cmpb #16,%d3 + jbne L(console_plot_pixel_exit) + addal %d0,%a1 + addal %d0,%a1 + addal %d1,%a1 + andb #1,%d2 + jbne L(white_16) + clrw %a1@ + jbra L(console_plot_pixel_exit) +L(white_16): + movew #0x0fff,%a1@ + jbra L(console_plot_pixel_exit) + +L(console_plot_pixel_exit): +func_return console_plot_pixel +#endif /* CONSOLE_DEBUG */ + + +__INITDATA + .align 4 + +m68k_init_mapped_size: + .long 0 + +#if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \ + defined(CONFIG_HP300) || defined(CONFIG_APOLLO) +L(custom): +L(iobase): + .long 0 +#endif + +#ifdef CONSOLE_DEBUG +L(console_globals): + .long 0 /* cursor column */ + .long 0 /* cursor row */ + .long 0 /* max num columns */ + .long 0 /* max num rows */ + .long 0 /* left edge */ +L(console_font): + .long 0 /* pointer to console font (struct font_desc) */ +L(console_font_data): + .long 0 /* pointer to console font data */ +#endif /* CONSOLE_DEBUG */ + +#if defined(MMU_PRINT) +L(mmu_print_data): + .long 0 /* valid flag */ + .long 0 /* start logical */ + .long 0 /* next logical */ + .long 0 /* start physical */ + .long 0 /* next physical */ +#endif /* MMU_PRINT */ + +L(cputype): + .long 0 +L(mmu_cached_pointer_tables): + .long 0 +L(mmu_num_pointer_tables): + .long 0 +L(phys_kernel_start): + .long 0 +L(kernel_end): + .long 0 +L(memory_start): + .long 0 +L(kernel_pgdir_ptr): + .long 0 +L(temp_mmap_mem): + .long 0 + +#if defined (CONFIG_MVME147) +M147_SCC_CTRL_A = 0xfffe3002 +M147_SCC_DATA_A = 0xfffe3003 +#endif + +#if defined (CONFIG_MVME16x) +M162_SCC_CTRL_A = 0xfff45005 +M167_CYCAR = 0xfff450ee +M167_CYIER = 0xfff45011 +M167_CYLICR = 0xfff45026 +M167_CYTEOIR = 0xfff45085 +M167_CYTDR = 0xfff450f8 +M167_PCSCCMICR = 0xfff4201d +M167_PCSCCTICR = 0xfff4201e +M167_PCSCCRICR = 0xfff4201f +M167_PCTPIACKR = 0xfff42025 +#endif + +#if defined (CONFIG_BVME6000) +BVME_SCC_CTRL_A = 0xffb0000b +BVME_SCC_DATA_A = 0xffb0000f +#endif + +#if defined(CONFIG_MAC) +L(mac_videobase): + .long 0 +L(mac_videodepth): + .long 0 +L(mac_dimensions): + .long 0 +L(mac_rowbytes): + .long 0 +L(mac_sccbase): + .long 0 +#endif /* CONFIG_MAC */ + +#if defined (CONFIG_APOLLO) +LSRB0 = 0x10412 +LTHRB0 = 0x10416 +LCPUCTRL = 0x10100 +#endif + +#if defined(CONFIG_HP300) +DCADATA = 0x11 +DCALSR = 0x1b +APCIDATA = 0x00 +APCILSR = 0x14 +L(uartbase): + .long 0 +L(uart_scode): + .long -1 +#endif + +__FINIT + .data + .align 4 + +availmem: + .long 0 +m68k_pgtable_cachemode: + .long 0 +m68k_supervisor_cachemode: + .long 0 +#if defined(CONFIG_MVME16x) +mvme_bdid: + .long 0,0,0,0,0,0,0,0 +#endif +#if defined(CONFIG_Q40) +q40_mem_cptr: + .long 0 +L(q40_do_debug): + .long 0 +#endif + +#if defined(CONFIG_VIRT) +GF_PUT_CHAR = 0x00 +L(virt_gf_tty_base): + .long 0 +#endif /* CONFIG_VIRT */ |