summaryrefslogtreecommitdiffstats
path: root/arch/microblaze
diff options
context:
space:
mode:
Diffstat (limited to 'arch/microblaze')
-rw-r--r--arch/microblaze/Kbuild8
-rw-r--r--arch/microblaze/Kconfig218
-rw-r--r--arch/microblaze/Kconfig.debug1
-rw-r--r--arch/microblaze/Kconfig.platform71
-rw-r--r--arch/microblaze/Makefile93
-rw-r--r--arch/microblaze/boot/.gitignore3
-rw-r--r--arch/microblaze/boot/Makefile35
-rw-r--r--arch/microblaze/boot/dts/Makefile20
-rw-r--r--arch/microblaze/boot/dts/linked_dtb.S2
-rw-r--r--arch/microblaze/boot/dts/system.dts353
-rw-r--r--arch/microblaze/configs/mmu_defconfig90
-rw-r--r--arch/microblaze/include/asm/Kbuild10
-rw-r--r--arch/microblaze/include/asm/asm-compat.h18
-rw-r--r--arch/microblaze/include/asm/asm-offsets.h1
-rw-r--r--arch/microblaze/include/asm/barrier.h13
-rw-r--r--arch/microblaze/include/asm/cache.h26
-rw-r--r--arch/microblaze/include/asm/cacheflush.h103
-rw-r--r--arch/microblaze/include/asm/checksum.h36
-rw-r--r--arch/microblaze/include/asm/cpuinfo.h105
-rw-r--r--arch/microblaze/include/asm/current.h26
-rw-r--r--arch/microblaze/include/asm/delay.h85
-rw-r--r--arch/microblaze/include/asm/dma.h12
-rw-r--r--arch/microblaze/include/asm/elf.h27
-rw-r--r--arch/microblaze/include/asm/entry.h34
-rw-r--r--arch/microblaze/include/asm/exceptions.h69
-rw-r--r--arch/microblaze/include/asm/fixmap.h66
-rw-r--r--arch/microblaze/include/asm/flat.h81
-rw-r--r--arch/microblaze/include/asm/ftrace.h27
-rw-r--r--arch/microblaze/include/asm/futex.h99
-rw-r--r--arch/microblaze/include/asm/hash.h82
-rw-r--r--arch/microblaze/include/asm/highmem.h61
-rw-r--r--arch/microblaze/include/asm/io.h60
-rw-r--r--arch/microblaze/include/asm/irq.h14
-rw-r--r--arch/microblaze/include/asm/irqflags.h119
-rw-r--r--arch/microblaze/include/asm/kgdb.h32
-rw-r--r--arch/microblaze/include/asm/mmu.h119
-rw-r--r--arch/microblaze/include/asm/mmu_context.h2
-rw-r--r--arch/microblaze/include/asm/mmu_context_mm.h140
-rw-r--r--arch/microblaze/include/asm/module.h28
-rw-r--r--arch/microblaze/include/asm/page.h146
-rw-r--r--arch/microblaze/include/asm/pci-bridge.h49
-rw-r--r--arch/microblaze/include/asm/pci.h44
-rw-r--r--arch/microblaze/include/asm/pgalloc.h41
-rw-r--r--arch/microblaze/include/asm/pgtable.h455
-rw-r--r--arch/microblaze/include/asm/processor.h92
-rw-r--r--arch/microblaze/include/asm/ptrace.h24
-rw-r--r--arch/microblaze/include/asm/pvr.h224
-rw-r--r--arch/microblaze/include/asm/registers.h45
-rw-r--r--arch/microblaze/include/asm/seccomp.h11
-rw-r--r--arch/microblaze/include/asm/sections.h20
-rw-r--r--arch/microblaze/include/asm/setup.h29
-rw-r--r--arch/microblaze/include/asm/string.h23
-rw-r--r--arch/microblaze/include/asm/switch_to.h21
-rw-r--r--arch/microblaze/include/asm/syscall.h79
-rw-r--r--arch/microblaze/include/asm/thread_info.h143
-rw-r--r--arch/microblaze/include/asm/timex.h13
-rw-r--r--arch/microblaze/include/asm/tlbflush.h53
-rw-r--r--arch/microblaze/include/asm/uaccess.h269
-rw-r--r--arch/microblaze/include/asm/unistd.h38
-rw-r--r--arch/microblaze/include/asm/unwind.h27
-rw-r--r--arch/microblaze/include/asm/vmalloc.h4
-rw-r--r--arch/microblaze/include/asm/xilinx_mb_manager.h29
-rw-r--r--arch/microblaze/include/uapi/asm/Kbuild3
-rw-r--r--arch/microblaze/include/uapi/asm/auxvec.h2
-rw-r--r--arch/microblaze/include/uapi/asm/byteorder.h11
-rw-r--r--arch/microblaze/include/uapi/asm/elf.h123
-rw-r--r--arch/microblaze/include/uapi/asm/posix_types.h10
-rw-r--r--arch/microblaze/include/uapi/asm/ptrace.h73
-rw-r--r--arch/microblaze/include/uapi/asm/setup.h20
-rw-r--r--arch/microblaze/include/uapi/asm/sigcontext.h21
-rw-r--r--arch/microblaze/include/uapi/asm/unistd.h16
-rw-r--r--arch/microblaze/kernel/.gitignore2
-rw-r--r--arch/microblaze/kernel/Makefile30
-rw-r--r--arch/microblaze/kernel/asm-offsets.c131
-rw-r--r--arch/microblaze/kernel/cpu/Makefile13
-rw-r--r--arch/microblaze/kernel/cpu/cache.c656
-rw-r--r--arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c110
-rw-r--r--arch/microblaze/kernel/cpu/cpuinfo-static.c145
-rw-r--r--arch/microblaze/kernel/cpu/cpuinfo.c142
-rw-r--r--arch/microblaze/kernel/cpu/mb.c158
-rw-r--r--arch/microblaze/kernel/cpu/pvr.c81
-rw-r--r--arch/microblaze/kernel/dma.c43
-rw-r--r--arch/microblaze/kernel/entry.S1311
-rw-r--r--arch/microblaze/kernel/exceptions.c144
-rw-r--r--arch/microblaze/kernel/ftrace.c217
-rw-r--r--arch/microblaze/kernel/head.S374
-rw-r--r--arch/microblaze/kernel/hw_exception_handler.S1094
-rw-r--r--arch/microblaze/kernel/irq.c39
-rw-r--r--arch/microblaze/kernel/kgdb.c152
-rw-r--r--arch/microblaze/kernel/mcount.S165
-rw-r--r--arch/microblaze/kernel/microblaze_ksyms.c48
-rw-r--r--arch/microblaze/kernel/misc.S66
-rw-r--r--arch/microblaze/kernel/module.c96
-rw-r--r--arch/microblaze/kernel/process.c143
-rw-r--r--arch/microblaze/kernel/prom.c30
-rw-r--r--arch/microblaze/kernel/ptrace.c169
-rw-r--r--arch/microblaze/kernel/reset.c42
-rw-r--r--arch/microblaze/kernel/setup.c199
-rw-r--r--arch/microblaze/kernel/signal.c316
-rw-r--r--arch/microblaze/kernel/stacktrace.c31
-rw-r--r--arch/microblaze/kernel/sys_microblaze.c55
-rw-r--r--arch/microblaze/kernel/syscall_table.S5
-rw-r--r--arch/microblaze/kernel/syscalls/Makefile32
-rw-r--r--arch/microblaze/kernel/syscalls/syscall.tbl460
-rw-r--r--arch/microblaze/kernel/timer.c330
-rw-r--r--arch/microblaze/kernel/traps.c78
-rw-r--r--arch/microblaze/kernel/unwind.c309
-rw-r--r--arch/microblaze/kernel/vmlinux.lds.S142
-rw-r--r--arch/microblaze/lib/Makefile24
-rw-r--r--arch/microblaze/lib/ashldi3.c29
-rw-r--r--arch/microblaze/lib/ashrdi3.c31
-rw-r--r--arch/microblaze/lib/cmpdi2.c27
-rw-r--r--arch/microblaze/lib/divsi3.S74
-rw-r--r--arch/microblaze/lib/fastcopy.S666
-rw-r--r--arch/microblaze/lib/libgcc.h33
-rw-r--r--arch/microblaze/lib/lshrdi3.c29
-rw-r--r--arch/microblaze/lib/memcpy.c179
-rw-r--r--arch/microblaze/lib/memmove.c195
-rw-r--r--arch/microblaze/lib/memset.c94
-rw-r--r--arch/microblaze/lib/modsi3.S74
-rw-r--r--arch/microblaze/lib/muldi3.c58
-rw-r--r--arch/microblaze/lib/mulsi3.S47
-rw-r--r--arch/microblaze/lib/uaccess_old.S176
-rw-r--r--arch/microblaze/lib/ucmpdi2.c21
-rw-r--r--arch/microblaze/lib/udivsi3.S85
-rw-r--r--arch/microblaze/lib/umodsi3.S87
-rw-r--r--arch/microblaze/mm/Makefile6
-rw-r--r--arch/microblaze/mm/consistent.c23
-rw-r--r--arch/microblaze/mm/fault.c299
-rw-r--r--arch/microblaze/mm/init.c291
-rw-r--r--arch/microblaze/mm/mmu_context.c65
-rw-r--r--arch/microblaze/mm/pgtable.c264
-rw-r--r--arch/microblaze/pci/Makefile6
-rw-r--r--arch/microblaze/pci/iomap.c58
134 files changed, 15046 insertions, 0 deletions
diff --git a/arch/microblaze/Kbuild b/arch/microblaze/Kbuild
new file mode 100644
index 0000000000..077a0b8e96
--- /dev/null
+++ b/arch/microblaze/Kbuild
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += kernel/
+obj-y += mm/
+obj-$(CONFIG_PCI) += pci/
+obj-y += boot/dts/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644
index 0000000000..211f338d62
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MICROBLAZE
+ def_bool y
+ select ARCH_32BIT_OFF_T
+ select ARCH_NO_SWAP
+ select ARCH_HAS_DMA_PREP_COHERENT
+ select ARCH_HAS_GCOV_PROFILE_ALL
+ select ARCH_HAS_SYNC_DMA_FOR_CPU
+ select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select BUILDTIME_TABLE_SORT
+ select TIMER_OF
+ select CLONE_BACKWARDS3
+ select COMMON_CLK
+ select DMA_DIRECT_REMAP
+ select GENERIC_ATOMIC64
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IDLE_POLL_SETUP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK
+ select HAS_IOPORT if PCI
+ select HAVE_ARCH_HASH
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_CONTIGUOUS
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACER
+ select HAVE_PCI
+ select IRQ_DOMAIN
+ select XILINX_INTC
+ select MODULES_USE_ELF_RELA
+ select OF
+ select OF_EARLY_FLATTREE
+ select PCI_DOMAINS_GENERIC if PCI
+ select PCI_SYSCALL if PCI
+ select CPU_NO_EFFICIENT_FFS
+ select MMU_GATHER_NO_RANGE
+ select SPARSE_IRQ
+ select ZONE_DMA
+ select TRACE_IRQFLAGS_SUPPORT
+ select GENERIC_IRQ_MULTI_HANDLER
+
+# Endianness selection
+choice
+ prompt "Endianness selection"
+ default CPU_LITTLE_ENDIAN
+ help
+ microblaze architectures can be configured for either little or
+ big endian formats. Be sure to select the appropriate mode.
+
+config CPU_BIG_ENDIAN
+ bool "Big endian"
+
+config CPU_LITTLE_ENDIAN
+ bool "Little endian"
+
+endchoice
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_CSUM
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+source "arch/microblaze/Kconfig.platform"
+
+menu "Processor type and features"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+ def_bool y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Default kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyUL0,115200"
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ depends on CMDLINE_BOOL
+ default n
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+endmenu
+
+menu "Kernel features"
+
+config NR_CPUS
+ int
+ default "1"
+
+config ADVANCED_OPTIONS
+ bool "Prompt for advanced kernel configuration options"
+ help
+ This option will enable prompting for a variety of advanced kernel
+ configuration options. These options can cause the kernel to not
+ work if they are set incorrectly, but can be used to optimize certain
+ aspects of kernel memory management.
+
+ Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+ depends on !ADVANCED_OPTIONS
+
+config HIGHMEM
+ bool "High memory support"
+ select KMAP_LOCAL
+ help
+ The address space of Microblaze processors is only 4 Gigabytes large
+ and it has to accommodate user address space, kernel address
+ space as well as some memory mapped IO. That means that, if you
+ have a large amount of physical memory and/or IO, not all of the
+ memory can be "permanently mapped" by the kernel. The physical
+ memory that is not permanently mapped is called "high memory".
+
+ If unsure, say n.
+
+config LOWMEM_SIZE_BOOL
+ bool "Set maximum low memory"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the maximum amount of memory which
+ will be used as "low memory", that is, memory which the kernel can
+ access directly, without having to set up a kernel virtual mapping.
+ This can be useful in optimizing the layout of kernel virtual
+ memory.
+
+ Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+ hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+ default "0x30000000"
+
+config MANUAL_RESET_VECTOR
+ hex "Microblaze reset vector address setup"
+ default "0x0"
+ help
+ Set this option to have the kernel override the CPU Reset vector.
+ If zero, no change will be made to the MicroBlaze reset vector at
+ address 0x0.
+ If non-zero, a jump instruction to this address, will be written
+ to the reset vector at address 0x0.
+ If you are unsure, set it to default value 0x0.
+
+config KERNEL_START_BOOL
+ bool "Set custom kernel base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the kernel virtual address at which
+ the kernel will map low memory (the kernel image will be linked at
+ this address). This can be useful in optimizing the virtual memory
+ layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config KERNEL_START
+ hex "Virtual address of kernel base" if KERNEL_START_BOOL
+ default "0xc0000000"
+
+config TASK_SIZE_BOOL
+ bool "Set custom user task size"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the amount of virtual address space
+ allocated to user tasks. This can be useful in optimizing the
+ virtual memory layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config TASK_SIZE
+ hex "Size of user task space" if TASK_SIZE_BOOL
+ default "0x80000000"
+
+config MB_MANAGER
+ bool "Support for Microblaze Manager"
+ depends on ADVANCED_OPTIONS
+ help
+ This option enables API for configuring the MicroBlaze manager
+ control register, which is consumed by the break handler to
+ block the break.
+
+ Say N here unless you know what you are doing.
+
+endmenu
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
new file mode 100644
index 0000000000..a4e40e534e
--- /dev/null
+++ b/arch/microblaze/Kconfig.debug
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/microblaze/Kconfig.platform b/arch/microblaze/Kconfig.platform
new file mode 100644
index 0000000000..7795f90dad
--- /dev/null
+++ b/arch/microblaze/Kconfig.platform
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+
+config OPT_LIB_FUNCTION
+ bool "Optimalized lib function"
+ default y
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ They are optimized by using word alignment. This will work
+ fine if both source and destination are aligned on the same
+ boundary. However, if they are aligned on different boundaries
+ shifts will be necessary. This might result in bad performance
+ on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+ bool "Optimalized lib function ASM"
+ depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+ depends on CPU_BIG_ENDIAN
+ default n
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ Function are written in asm code.
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+ hex "Physical address where Linux Kernel is"
+ default "0x90000000"
+ help
+ BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+ string "Targeted FPGA family"
+ default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+ int "USE_MSR_INSTR range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+ int "USE_PCMP_INSTR range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+ int "USE_BARREL range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+ int "USE_DIV range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+ int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+ int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+ default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+ string "Core version number"
+ default "7.10.d"
+
+endmenu
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
new file mode 100644
index 0000000000..02e6be9c5b
--- /dev/null
+++ b/arch/microblaze/Makefile
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+KBUILD_DEFCONFIG := mmu_defconfig
+
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+
+# What CPU version are we building for, and crack it open
+# as major.minor.rev
+CPU_VER := $(CONFIG_XILINX_MICROBLAZE0_HW_VER)
+CPU_MAJOR := $(word 1, $(subst ., , $(CPU_VER)))
+CPU_MINOR := $(word 2, $(subst ., , $(CPU_VER)))
+CPU_REV := $(word 3, $(subst ., , $(CPU_VER)))
+
+export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
+
+# Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
+
+# Work out HW multipler support. This is tricky.
+# 1. Spartan2 has no HW multipliers.
+# 2. MicroBlaze v3.x always uses them, except in Spartan 2
+# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
+ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
+ ifeq ($(CPU_MAJOR),3)
+ CPUFLAGS-1 += -mno-xl-soft-mul
+ else
+ # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
+ CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
+ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
+ endif
+endif
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
+
+ifdef CONFIG_CPU_BIG_ENDIAN
+KBUILD_CFLAGS += -mbig-endian
+KBUILD_AFLAGS += -mbig-endian
+KBUILD_LDFLAGS += -EB
+else
+KBUILD_CFLAGS += -mlittle-endian
+KBUILD_AFLAGS += -mlittle-endian
+KBUILD_LDFLAGS += -EL
+endif
+
+CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
+
+# r31 holds current when in kernel mode
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
+
+libs-y += arch/microblaze/lib/
+
+boot := arch/microblaze/boot
+
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+export DTB
+
+all: linux.bin
+
+archheaders:
+ $(Q)$(MAKE) $(build)=arch/microblaze/kernel/syscalls all
+
+PHONY += linux.bin linux.bin.gz linux.bin.ub
+linux.bin.ub linux.bin.gz: linux.bin
+linux.bin: vmlinux
+linux.bin linux.bin.gz linux.bin.ub:
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+ @echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+PHONY += simpleImage.$(DTB)
+simpleImage.$(DTB): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip)
+ @echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+define archhelp
+ echo '* linux.bin - Create raw binary'
+ echo ' linux.bin.gz - Create compressed raw binary'
+ echo ' linux.bin.ub - Create U-Boot wrapped raw binary'
+ echo ' simpleImage.<dt> - Create the following images with <dt>.dtb linked in'
+ echo ' simpleImage.<dt> : raw image'
+ echo ' simpleImage.<dt>.ub : raw image with U-Boot header'
+ echo ' simpleImage.<dt>.unstrip: ELF (identical to vmlinux)'
+ echo ' simpleImage.<dt>.strip : stripped ELF'
+ echo ' Targets with <dt> embed a device tree blob inside the image'
+ echo ' These targets support board with firmware that does not'
+ echo ' support passing a device tree directly. Replace <dt> with the'
+ echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
+ echo ' (minus the .dts extension).'
+endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*
diff --git a/arch/microblaze/boot/.gitignore b/arch/microblaze/boot/.gitignore
new file mode 100644
index 0000000000..11a9e229f3
--- /dev/null
+++ b/arch/microblaze/boot/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+linux.bin*
+simpleImage.*
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
new file mode 100644
index 0000000000..2b42c370d5
--- /dev/null
+++ b/arch/microblaze/boot/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/microblaze/boot/Makefile
+#
+
+targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.*
+
+OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
+
+$(obj)/linux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
+ $(call if_changed,uimage)
+
+$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
+ $(call if_changed,gzip)
+
+quiet_cmd_strip = STRIP $< $@$2
+ cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
+ -K _fdt_start $< -o $@$2
+
+UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR)
+
+$(obj)/simpleImage.$(DTB): vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/simpleImage.$(DTB).ub: $(obj)/simpleImage.$(DTB) FORCE
+ $(call if_changed,uimage)
+
+$(obj)/simpleImage.$(DTB).unstrip: vmlinux FORCE
+ $(call if_changed,copy)
+
+$(obj)/simpleImage.$(DTB).strip: vmlinux FORCE
+ $(call if_changed,strip)
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
new file mode 100644
index 0000000000..b84e2cbb20
--- /dev/null
+++ b/arch/microblaze/boot/dts/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+dtb-y := system.dtb
+
+ifneq ($(DTB),)
+obj-y += linked_dtb.o
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,copy)
+endif
+endif
+
+# Rule to build device tree blobs
+DTC_FLAGS := -p 1024
diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S
new file mode 100644
index 0000000000..23345af372
--- /dev/null
+++ b/arch/microblaze/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/dts/system.dtb"
diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
new file mode 100644
index 0000000000..22252451ec
--- /dev/null
+++ b/arch/microblaze/boot/dts/system.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,microblaze";
+ model = "testing";
+ DDR2_SDRAM: memory@90000000 {
+ device_type = "memory";
+ reg = < 0x90000000 0x10000000 >;
+ } ;
+ aliases {
+ ethernet0 = &Hard_Ethernet_MAC;
+ serial0 = &RS232_Uart_1;
+ } ;
+ chosen {
+ bootargs = "console=ttyUL0,115200 highres=on";
+ stdout-path = "/plb@0/serial@84000000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ microblaze_0: cpu@0 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,microblaze-7.10.d";
+ d-cache-baseaddr = <0x90000000>;
+ d-cache-highaddr = <0x9fffffff>;
+ d-cache-line-size = <0x10>;
+ d-cache-size = <0x2000>;
+ device_type = "cpu";
+ i-cache-baseaddr = <0x90000000>;
+ i-cache-highaddr = <0x9fffffff>;
+ i-cache-line-size = <0x10>;
+ i-cache-size = <0x2000>;
+ model = "microblaze,7.10.d";
+ reg = <0>;
+ timebase-frequency = <125000000>;
+ xlnx,addr-tag-bits = <0xf>;
+ xlnx,allow-dcache-wr = <0x1>;
+ xlnx,allow-icache-wr = <0x1>;
+ xlnx,area-optimized = <0x0>;
+ xlnx,cache-byte-size = <0x2000>;
+ xlnx,d-lmb = <0x1>;
+ xlnx,d-opb = <0x0>;
+ xlnx,d-plb = <0x1>;
+ xlnx,data-size = <0x20>;
+ xlnx,dcache-addr-tag = <0xf>;
+ xlnx,dcache-always-used = <0x1>;
+ xlnx,dcache-byte-size = <0x2000>;
+ xlnx,dcache-line-len = <0x4>;
+ xlnx,dcache-use-fsl = <0x1>;
+ xlnx,debug-enabled = <0x1>;
+ xlnx,div-zero-exception = <0x1>;
+ xlnx,dopb-bus-exception = <0x0>;
+ xlnx,dynamic-bus-sizing = <0x1>;
+ xlnx,edge-is-positive = <0x1>;
+ xlnx,family = "virtex5";
+ xlnx,endianness = <0x1>;
+ xlnx,fpu-exception = <0x1>;
+ xlnx,fsl-data-size = <0x20>;
+ xlnx,fsl-exception = <0x0>;
+ xlnx,fsl-links = <0x0>;
+ xlnx,i-lmb = <0x1>;
+ xlnx,i-opb = <0x0>;
+ xlnx,i-plb = <0x1>;
+ xlnx,icache-always-used = <0x1>;
+ xlnx,icache-line-len = <0x4>;
+ xlnx,icache-use-fsl = <0x1>;
+ xlnx,ill-opcode-exception = <0x1>;
+ xlnx,instance = "microblaze_0";
+ xlnx,interconnect = <0x1>;
+ xlnx,interrupt-is-edge = <0x0>;
+ xlnx,iopb-bus-exception = <0x0>;
+ xlnx,mmu-dtlb-size = <0x4>;
+ xlnx,mmu-itlb-size = <0x2>;
+ xlnx,mmu-tlb-access = <0x3>;
+ xlnx,mmu-zones = <0x10>;
+ xlnx,number-of-pc-brk = <0x1>;
+ xlnx,number-of-rd-addr-brk = <0x0>;
+ xlnx,number-of-wr-addr-brk = <0x0>;
+ xlnx,opcode-0x0-illegal = <0x1>;
+ xlnx,pvr = <0x2>;
+ xlnx,pvr-user1 = <0x0>;
+ xlnx,pvr-user2 = <0x0>;
+ xlnx,reset-msr = <0x0>;
+ xlnx,sco = <0x0>;
+ xlnx,unaligned-exceptions = <0x1>;
+ xlnx,use-barrel = <0x1>;
+ xlnx,use-dcache = <0x1>;
+ xlnx,use-div = <0x1>;
+ xlnx,use-ext-brk = <0x1>;
+ xlnx,use-ext-nm-brk = <0x1>;
+ xlnx,use-extended-fsl-instr = <0x0>;
+ xlnx,use-fpu = <0x2>;
+ xlnx,use-hw-mul = <0x2>;
+ xlnx,use-icache = <0x1>;
+ xlnx,use-interrupt = <0x1>;
+ xlnx,use-mmu = <0x3>;
+ xlnx,use-msr-instr = <0x1>;
+ xlnx,use-pcmp-instr = <0x1>;
+ } ;
+ } ;
+ mb_plb: plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+ ranges ;
+ FLASH: flash@a0000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xa0000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x1f40>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x0>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x2af8>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges ;
+ ethernet@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 5 2 >;
+ llink-connected = <&PIM3>;
+ local-mac-address = [ 00 0a 35 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x1>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x1000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x1000>;
+ } ;
+ } ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x7735940>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LEDs_8Bit: gpio@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x8>;
+ xlnx,interrupt-present = <0x1>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ } ;
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&LEDs_8Bit 4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow {
+ label = "Yellow";
+ gpios = <&LEDs_8Bit 5 1>;
+ };
+
+ red {
+ label = "Red";
+ gpios = <&LEDs_8Bit 6 1>;
+ };
+
+ green {
+ label = "Green";
+ gpios = <&LEDs_8Bit 7 1>;
+ };
+ } ;
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ /*
+ * FIXME: is this active low or active high?
+ * the current flag (1) indicates active low.
+ * delay measures are templates, should be adjusted
+ * to datasheet or trial-and-error with real hardware.
+ */
+ gpios = <&LEDs_8Bit 2 1>;
+ active-delay = <100>;
+ inactive-delay = <10>;
+ wait-delay = <100>;
+ };
+
+ RS232_Uart_1: serial@84000000 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ current-speed = <115200>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 0 >;
+ port-number = <0>;
+ reg = < 0x84000000 0x10000 >;
+ xlnx,baudrate = <0x1c200>;
+ xlnx,data-bits = <0x8>;
+ xlnx,family = "virtex5";
+ xlnx,odd-parity = <0x0>;
+ xlnx,use-parity = <0x0>;
+ } ;
+ debug_module: debug@84400000 {
+ compatible = "xlnx,mdm-1.00.d";
+ reg = < 0x84400000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,interconnect = <0x1>;
+ xlnx,jtag-chain = <0x2>;
+ xlnx,mb-dbg-ports = <0x1>;
+ xlnx,uart-width = <0x8>;
+ xlnx,use-uart = <0x1>;
+ xlnx,write-fsl-ports = <0x0>;
+ } ;
+ mpmc@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,mpmc-4.02.a";
+ ranges ;
+ PIM3: sdma@84600180 {
+ compatible = "xlnx,ll-dma-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 2 2 1 2 >;
+ reg = < 0x84600180 0x80 >;
+ } ;
+ } ;
+ xps_intc_0: interrupt-controller@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,kind-of-intr = <0x100>;
+ xlnx,num-intr-inputs = <0x9>;
+ } ;
+ xps_timer_1: timer@83c00000 {
+ compatible = "xlnx,xps-timer-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 3 2 >;
+ reg = < 0x83c00000 0x10000 >;
+ xlnx,count-width = <0x20>;
+ xlnx,one-timer-only = <0x0>;
+ } ;
+ } ;
+} ;
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
new file mode 100644
index 0000000000..7b2d7f6f23
--- /dev/null
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -0,0 +1,90 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_BASE_FULL is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EXPERT=y
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_HIGHMEM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=m
+CONFIG_PCI=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_XILINX_AXI_EMAC=y
+CONFIG_XILINX_LL_TEMAC=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_XILINX_HWICAP=y
+CONFIG_I2C=y
+CONFIG_I2C_XILINX=y
+CONFIG_SPI=y
+CONFIG_SPI_XILINX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_XILINX=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_UIO_DMEM_GENIRQ=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_DMA_CMA=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_KGDB=y
+CONFIG_KGDB_TESTS=y
+CONFIG_KGDB_KDB=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
new file mode 100644
index 0000000000..a055f5dbe0
--- /dev/null
+++ b/arch/microblaze/include/asm/Kbuild
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+generated-y += syscall_table.h
+generic-y += cmpxchg.h
+generic-y += extable.h
+generic-y += kvm_para.h
+generic-y += mcs_spinlock.h
+generic-y += parport.h
+generic-y += syscalls.h
+generic-y += tlb.h
+generic-y += user.h
diff --git a/arch/microblaze/include/asm/asm-compat.h b/arch/microblaze/include/asm/asm-compat.h
new file mode 100644
index 0000000000..c05259ce2d
--- /dev/null
+++ b/arch/microblaze/include/asm/asm-compat.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H
+#define _ASM_MICROBLAZE_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+# define stringify_in_c(...) __VA_ARGS__
+# define ASM_CONST(x) x
+#else
+/* This version of stringify will deal with commas... */
+# define __stringify_in_c(...) #__VA_ARGS__
+# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " "
+# define __ASM_CONST(x) x##UL
+# define ASM_CONST(x) __ASM_CONST(x)
+#endif
+
+#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */
diff --git a/arch/microblaze/include/asm/asm-offsets.h b/arch/microblaze/include/asm/asm-offsets.h
new file mode 100644
index 0000000000..d370ee36a1
--- /dev/null
+++ b/arch/microblaze/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/microblaze/include/asm/barrier.h b/arch/microblaze/include/asm/barrier.h
new file mode 100644
index 0000000000..70b0a01778
--- /dev/null
+++ b/arch/microblaze/include/asm/barrier.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 - 2020 Xilinx, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_MICROBLAZE_BARRIER_H
+#define _ASM_MICROBLAZE_BARRIER_H
+
+#define mb() __asm__ __volatile__ ("mbar 1" : : : "memory")
+
+#include <asm-generic/barrier.h>
+
+#endif /* _ASM_MICROBLAZE_BARRIER_H */
diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h
new file mode 100644
index 0000000000..1903988b9e
--- /dev/null
+++ b/arch/microblaze/include/asm/cache.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cache operations
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHE_H
+#define _ASM_MICROBLAZE_CACHE_H
+
+#include <asm/registers.h>
+
+#define L1_CACHE_SHIFT 5
+/* word-granular cache in microblaze */
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+
+#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
+
+#endif /* _ASM_MICROBLAZE_CACHE_H */
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
new file mode 100644
index 0000000000..ffa2cf3893
--- /dev/null
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * based on v850 version which was
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHEFLUSH_H
+#define _ASM_MICROBLAZE_CACHEFLUSH_H
+
+/* Somebody depends on this; sigh... */
+#include <linux/mm.h>
+#include <linux/io.h>
+
+/* Look at Documentation/core-api/cachetlb.rst */
+
+/*
+ * Cache handling functions.
+ * Microblaze has a write-through data cache, meaning that the data cache
+ * never needs to be flushed. The only flushing operations that are
+ * implemented are to invalidate the instruction cache. These are called
+ * after loading a user application into memory, we must invalidate the
+ * instruction cache to make sure we don't fetch old, bad code.
+ */
+
+/* struct cache, d=dcache, i=icache, fl = flush, iv = invalidate,
+ * suffix r = range */
+struct scache {
+ /* icache */
+ void (*ie)(void); /* enable */
+ void (*id)(void); /* disable */
+ void (*ifl)(void); /* flush */
+ void (*iflr)(unsigned long a, unsigned long b);
+ void (*iin)(void); /* invalidate */
+ void (*iinr)(unsigned long a, unsigned long b);
+ /* dcache */
+ void (*de)(void); /* enable */
+ void (*dd)(void); /* disable */
+ void (*dfl)(void); /* flush */
+ void (*dflr)(unsigned long a, unsigned long b);
+ void (*din)(void); /* invalidate */
+ void (*dinr)(unsigned long a, unsigned long b);
+};
+
+/* microblaze cache */
+extern struct scache *mbc;
+
+void microblaze_cache_init(void);
+
+#define enable_icache() mbc->ie();
+#define disable_icache() mbc->id();
+#define flush_icache() mbc->ifl();
+#define flush_icache_range(start, end) mbc->iflr(start, end);
+#define invalidate_icache() mbc->iin();
+#define invalidate_icache_range(start, end) mbc->iinr(start, end);
+
+#define enable_dcache() mbc->de();
+#define disable_dcache() mbc->dd();
+/* FIXME for LL-temac driver */
+#define invalidate_dcache() mbc->din();
+#define invalidate_dcache_range(start, end) mbc->dinr(start, end);
+#define flush_dcache() mbc->dfl();
+#define flush_dcache_range(start, end) mbc->dflr(start, end);
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+/* MS: We have to implement it because of rootfs-jffs2 issue on WB */
+#define flush_dcache_page(page) \
+do { \
+ unsigned long addr = (unsigned long) page_address(page); /* virtual */ \
+ addr = (u32)virt_to_phys((void *)addr); \
+ flush_dcache_range((unsigned) (addr), (unsigned) (addr) + PAGE_SIZE); \
+} while (0);
+
+static inline void flush_dcache_folio(struct folio *folio)
+{
+ unsigned long addr = folio_pfn(folio) << PAGE_SHIFT;
+
+ flush_dcache_range(addr, addr + folio_size(folio));
+}
+#define flush_dcache_folio flush_dcache_folio
+
+#define flush_cache_page(vma, vmaddr, pfn) \
+ flush_dcache_range(pfn << PAGE_SHIFT, (pfn << PAGE_SHIFT) + PAGE_SIZE);
+
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr,
+ void *dst, void *src, int len)
+{
+ u32 addr = virt_to_phys(dst);
+ memcpy(dst, src, len);
+ if (vma->vm_flags & VM_EXEC) {
+ invalidate_icache_range(addr, addr + PAGE_SIZE);
+ flush_dcache_range(addr, addr + PAGE_SIZE);
+ }
+}
+#define copy_to_user_page copy_to_user_page
+
+#include <asm-generic/cacheflush.h>
+
+#endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
new file mode 100644
index 0000000000..2e5ebd5999
--- /dev/null
+++ b/arch/microblaze/include/asm/checksum.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_CHECKSUM_H
+#define _ASM_MICROBLAZE_CHECKSUM_H
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+#define csum_tcpudp_nofold csum_tcpudp_nofold
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+ __u8 proto, __wsum sum)
+{
+ __asm__("add %0, %0, %1\n\t"
+ "addc %0, %0, %2\n\t"
+ "addc %0, %0, %3\n\t"
+ "addc %0, %0, r0\n\t"
+ : "+&d" (sum)
+ : "d" (saddr), "d" (daddr),
+#ifdef __MICROBLAZEEL__
+ "d" ((len + proto) << 8)
+#else
+ "d" (len + proto)
+#endif
+);
+ return sum;
+}
+
+#include <asm-generic/checksum.h>
+
+#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h
new file mode 100644
index 0000000000..786ffa669b
--- /dev/null
+++ b/arch/microblaze/include/asm/cpuinfo.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Generic support for queying CPU info
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_CPUINFO_H
+#define _ASM_MICROBLAZE_CPUINFO_H
+
+#include <linux/of.h>
+
+/* CPU Version and FPGA Family code conversion table type */
+struct cpu_ver_key {
+ const char *s;
+ const unsigned k;
+};
+
+extern const struct cpu_ver_key cpu_ver_lookup[];
+
+struct family_string_key {
+ const char *s;
+ const unsigned k;
+};
+
+extern const struct family_string_key family_string_lookup[];
+
+struct cpuinfo {
+ /* Core CPU configuration */
+ u32 use_instr;
+ u32 use_mult;
+ u32 use_fpu;
+ u32 use_exc;
+ u32 ver_code;
+ u32 mmu;
+ u32 mmu_privins;
+ u32 endian;
+
+ /* CPU caches */
+ u32 use_icache;
+ u32 icache_tagbits;
+ u32 icache_write;
+ u32 icache_line_length;
+ u32 icache_size;
+ unsigned long icache_base;
+ unsigned long icache_high;
+
+ u32 use_dcache;
+ u32 dcache_tagbits;
+ u32 dcache_write;
+ u32 dcache_line_length;
+ u32 dcache_size;
+ u32 dcache_wb;
+ unsigned long dcache_base;
+ unsigned long dcache_high;
+
+ /* Bus connections */
+ u32 use_dopb;
+ u32 use_iopb;
+ u32 use_dlmb;
+ u32 use_ilmb;
+ u32 num_fsl;
+
+ /* CPU interrupt line info */
+ u32 irq_edge;
+ u32 irq_positive;
+
+ u32 area_optimised;
+
+ /* HW debug support */
+ u32 hw_debug;
+ u32 num_pc_brk;
+ u32 num_rd_brk;
+ u32 num_wr_brk;
+ u32 cpu_clock_freq; /* store real freq of cpu */
+
+ /* FPGA family */
+ u32 fpga_family_code;
+
+ /* User define */
+ u32 pvr_user1;
+ u32 pvr_user2;
+};
+
+extern struct cpuinfo cpuinfo;
+
+/* fwd declarations of the various CPUinfo populators */
+void setup_cpuinfo(void);
+void setup_cpuinfo_clk(void);
+
+void set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu);
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu);
+
+static inline unsigned int fcpu(struct device_node *cpu, char *n)
+{
+ u32 val = 0;
+
+ of_property_read_u32(cpu, n, &val);
+
+ return val;
+}
+
+#endif /* _ASM_MICROBLAZE_CPUINFO_H */
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
new file mode 100644
index 0000000000..a4bb45be30
--- /dev/null
+++ b/arch/microblaze/include/asm/current.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_CURRENT_H
+#define _ASM_MICROBLAZE_CURRENT_H
+
+/*
+ * Register used to hold the current task pointer while in the kernel.
+ * Any `call clobbered' register without a special meaning should be OK,
+ * but check asm/microblaze/kernel/entry.S to be sure.
+ */
+#define CURRENT_TASK r31
+# ifndef __ASSEMBLY__
+/*
+ * Dedicate r31 to keeping the current task pointer
+ */
+register struct task_struct *current asm("r31");
+
+# define get_current() current
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_CURRENT_H */
diff --git a/arch/microblaze/include/asm/delay.h b/arch/microblaze/include/asm/delay.h
new file mode 100644
index 0000000000..05fe9e3e00
--- /dev/null
+++ b/arch/microblaze/include/asm/delay.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2007 John Williams
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_DELAY_H
+#define _ASM_MICROBLAZE_DELAY_H
+
+#include <linux/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+ asm volatile ("# __delay \n\t" \
+ "1: addi %0, %0, -1\t\n" \
+ "bneid %0, 1b \t\n" \
+ "nop \t\n"
+ : "=r" (loops)
+ : "0" (loops));
+}
+
+/*
+ * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
+ * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
+ *
+ * The mul instruction gives us loops = (a * b) / 2^32.
+ * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
+ * because this lets us support a wide range of HZ and
+ * loops_per_jiffy values without either a or b overflowing 2^32.
+ * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
+ * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
+ * (which corresponds to ~3800 bogomips at HZ = 100).
+ * -- paulus
+ */
+#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */
+#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void __udelay(unsigned int x)
+{
+
+ unsigned long long tmp =
+ (unsigned long long)x * (unsigned long long)loops_per_jiffy \
+ * 226LL;
+ unsigned loops = tmp >> 32;
+
+/*
+ __asm__("mulxuu %0,%1,%2" : "=r" (loops) :
+ "r" (x), "r" (loops_per_jiffy * 226));
+*/
+ __delay(loops);
+}
+
+extern void __bad_udelay(void); /* deliberately undefined */
+extern void __bad_ndelay(void); /* deliberately undefined */
+
+#define udelay(n) \
+ ({ \
+ if (__builtin_constant_p(n)) { \
+ if ((n) / __MAX_UDELAY >= 1) \
+ __bad_udelay(); \
+ else \
+ __udelay((n) * (19 * HZ)); \
+ } else { \
+ __udelay((n) * (19 * HZ)); \
+ } \
+ })
+
+#define ndelay(n) \
+ ({ \
+ if (__builtin_constant_p(n)) { \
+ if ((n) / __MAX_NDELAY >= 1) \
+ __bad_ndelay(); \
+ else \
+ __udelay((n) * HZ); \
+ } else { \
+ __udelay((n) * HZ); \
+ } \
+ })
+
+#define muldiv(a, b, c) (((a)*(b))/(c))
+
+#endif /* _ASM_MICROBLAZE_DELAY_H */
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
new file mode 100644
index 0000000000..7484c9eb66
--- /dev/null
+++ b/arch/microblaze/include/asm/dma.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_H
+#define _ASM_MICROBLAZE_DMA_H
+
+/* Virtual address corresponding to last available physical memory address. */
+#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
+
+#endif /* _ASM_MICROBLAZE_DMA_H */
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
new file mode 100644
index 0000000000..5331a8473a
--- /dev/null
+++ b/arch/microblaze/include/asm/elf.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_ELF_H
+#define _ASM_MICROBLAZE_ELF_H
+
+#include <uapi/asm/elf.h>
+
+#ifndef __uClinux__
+#ifndef ELF_GREG_T
+#endif
+#ifndef ELF_NGREG
+#endif
+#ifndef ELF_GREGSET_T
+#endif
+#ifndef ELF_FPREGSET_T
+#endif
+#ifdef __MICROBLAZEEL__
+#else
+#endif
+#define SET_PERSONALITY(ex) \
+ set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
+#endif /* __uClinux__ */
+#endif /* _ASM_MICROBLAZE_ELF_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
new file mode 100644
index 0000000000..6c42bed411
--- /dev/null
+++ b/arch/microblaze/include/asm/entry.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions used by low-level trap handlers
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ */
+
+#ifndef _ASM_MICROBLAZE_ENTRY_H
+#define _ASM_MICROBLAZE_ENTRY_H
+
+#include <asm/percpu.h>
+#include <asm/ptrace.h>
+#include <linux/linkage.h>
+
+/*
+ * These are per-cpu variables required in entry.S, among other
+ * places
+ */
+
+#define PER_CPU(var) var
+
+# ifndef __ASSEMBLY__
+DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
+DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
+DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
+
+extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall);
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
new file mode 100644
index 0000000000..967f175173
--- /dev/null
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Preliminary support for HW exception handing for Microblaze
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_EXCEPTIONS_H
+#define _ASM_MICROBLAZE_EXCEPTIONS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/* Macros to enable and disable HW exceptions in the MSR */
+/* Define MSR enable bit for HW exceptions */
+#define HWEX_MSR_BIT (1 << 8)
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#define __enable_hw_exceptions() \
+ __asm__ __volatile__ (" msrset r0, %0; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory")
+
+#define __disable_hw_exceptions() \
+ __asm__ __volatile__ (" msrclr r0, %0; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory")
+#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+#define __enable_hw_exceptions() \
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ ori r12, r12, %0; \
+ mts rmsr, r12; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory", "r12")
+
+#define __disable_hw_exceptions() \
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ andi r12, r12, ~%0; \
+ mts rmsr, r12; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory", "r12")
+#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+ int fsr, int addr);
+
+asmlinkage void sw_exception(struct pt_regs *regs);
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig);
+
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
+#endif /*__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */
diff --git a/arch/microblaze/include/asm/fixmap.h b/arch/microblaze/include/asm/fixmap.h
new file mode 100644
index 0000000000..e6e9288bff
--- /dev/null
+++ b/arch/microblaze/include/asm/fixmap.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ * Port to powerpc added by Kumar Gala
+ *
+ * Copyright 2011 Michal Simek <monstr@monstr.eu>
+ * Copyright 2011 PetaLogix Qld Pty Ltd
+ * Port to Microblaze
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_size.h>
+#endif
+
+#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+ FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+ FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
+ FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_MAX_IDX * num_possible_cpus()) - 1,
+#endif
+ __end_of_fixed_addresses
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+ phys_addr_t phys, pgprot_t flags);
+
+#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE)
+
+#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_CI
+
+#include <asm-generic/fixmap.h>
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h
new file mode 100644
index 0000000000..79a749f4ad
--- /dev/null
+++ b/arch/microblaze/include/asm/flat.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_FLAT_H
+#define _ASM_MICROBLAZE_FLAT_H
+
+#include <asm/unaligned.h>
+
+/*
+ * Microblaze works a little differently from other arches, because
+ * of the MICROBLAZE_64 reloc type. Here, a 32 bit address is split
+ * over two instructions, an 'imm' instruction which provides the top
+ * 16 bits, then the instruction "proper" which provides the low 16
+ * bits.
+ */
+
+/*
+ * Crack open a symbol reference and extract the address to be
+ * relocated. rp is a potentially unaligned pointer to the
+ * reference
+ */
+
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr)
+{
+ u32 *p = (__force u32 *)rp;
+
+ /* Is it a split 64/32 reference? */
+ if (relval & 0x80000000) {
+ /* Grab the two halves of the reference */
+ u32 val_hi, val_lo;
+
+ val_hi = get_unaligned(p);
+ val_lo = get_unaligned(p+1);
+
+ /* Crack the address out */
+ *addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff);
+ } else {
+ /* Get the address straight out */
+ *addr = get_unaligned(p);
+ }
+
+ return 0;
+}
+
+/*
+ * Insert an address into the symbol reference at rp. rp is potentially
+ * unaligned.
+ */
+
+static inline int
+flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 relval)
+{
+ u32 *p = (__force u32 *)rp;
+ /* Is this a split 64/32 reloc? */
+ if (relval & 0x80000000) {
+ /* Get the two "halves" */
+ unsigned long val_hi = get_unaligned(p);
+ unsigned long val_lo = get_unaligned(p + 1);
+
+ /* insert the address */
+ val_hi = (val_hi & 0xffff0000) | addr >> 16;
+ val_lo = (val_lo & 0xffff0000) | (addr & 0xffff);
+
+ /* store the two halves back into memory */
+ put_unaligned(val_hi, p);
+ put_unaligned(val_lo, p+1);
+ } else {
+ /* Put it straight in, no messing around */
+ put_unaligned(addr, p);
+ }
+ return 0;
+}
+
+#define flat_get_relocate_addr(rel) (rel & 0x7fffffff)
+
+#endif /* _ASM_MICROBLAZE_FLAT_H */
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
new file mode 100644
index 0000000000..6a92bed377
--- /dev/null
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_FTRACE
+#define _ASM_MICROBLAZE_FTRACE
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR ((unsigned long)(_mcount))
+#define MCOUNT_INSN_SIZE 8 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+extern void ftrace_call_graph(void);
+#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* relocation of mcount call site is the same as the address */
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+ return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#endif /* CONFIG_FUNCTION_TRACER */
+#endif /* _ASM_MICROBLAZE_FTRACE */
diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h
new file mode 100644
index 0000000000..86131ed84c
--- /dev/null
+++ b/arch/microblaze/include/asm/futex.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_FUTEX_H
+#define _ASM_MICROBLAZE_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+({ \
+ __asm__ __volatile__ ( \
+ "1: lwx %0, %2, r0; " \
+ insn \
+ "2: swx %1, %2, r0; \
+ addic %1, r0, 0; \
+ bnei %1, 1b; \
+ 3: \
+ .section .fixup,\"ax\"; \
+ 4: brid 3b; \
+ addik %1, r0, %3; \
+ .previous; \
+ .section __ex_table,\"a\"; \
+ .word 1b,4b,2b,4b; \
+ .previous;" \
+ : "=&r" (oldval), "=&r" (ret) \
+ : "r" (uaddr), "i" (-EFAULT), "r" (oparg) \
+ ); \
+})
+
+static inline int
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
+{
+ int oldval = 0, ret;
+
+ if (!access_ok(uaddr, sizeof(u32)))
+ return -EFAULT;
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("or %1,%4,%4;", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("add %1,%0,%4;", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ if (!ret)
+ *oval = oldval;
+
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+ u32 oldval, u32 newval)
+{
+ int ret = 0, cmp;
+ u32 prev;
+
+ if (!access_ok(uaddr, sizeof(u32)))
+ return -EFAULT;
+
+ __asm__ __volatile__ ("1: lwx %1, %3, r0; \
+ cmp %2, %1, %4; \
+ bnei %2, 3f; \
+ 2: swx %5, %3, r0; \
+ addic %2, r0, 0; \
+ bnei %2, 1b; \
+ 3: \
+ .section .fixup,\"ax\"; \
+ 4: brid 3b; \
+ addik %0, r0, %6; \
+ .previous; \
+ .section __ex_table,\"a\"; \
+ .word 1b,4b,2b,4b; \
+ .previous;" \
+ : "+r" (ret), "=&r" (prev), "=&r"(cmp) \
+ : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT));
+
+ *uval = prev;
+ return ret;
+}
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/microblaze/include/asm/hash.h b/arch/microblaze/include/asm/hash.h
new file mode 100644
index 0000000000..ef4741a405
--- /dev/null
+++ b/arch/microblaze/include/asm/hash.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_HASH_H
+#define _ASM_HASH_H
+
+/*
+ * Fortunately, most people who want to run Linux on Microblaze enable
+ * both multiplier and barrel shifter, but omitting them is technically
+ * a supported configuration.
+ *
+ * With just a barrel shifter, we can implement an efficient constant
+ * multiply using shifts and adds. GCC can find a 9-step solution, but
+ * this 6-step solution was found by Yevgen Voronenko's implementation
+ * of the Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html.
+ *
+ * That software is really not designed for a single multiplier this large,
+ * but if you run it enough times with different seeds, it'll find several
+ * 6-shift, 6-add sequences for computing x * 0x61C88647. They are all
+ * c = (x << 19) + x;
+ * a = (x << 9) + c;
+ * b = (x << 23) + a;
+ * return (a<<11) + (b<<6) + (c<<3) - b;
+ * with variations on the order of the final add.
+ *
+ * Without even a shifter, it's hopless; any hash function will suck.
+ */
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL == 0
+
+#define HAVE_ARCH__HASH_32 1
+
+/* Multiply by GOLDEN_RATIO_32 = 0x61C88647 */
+static inline u32 __attribute_const__ __hash_32(u32 a)
+{
+#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL
+ unsigned int b, c;
+
+ /* Phase 1: Compute three intermediate values */
+ b = a << 23;
+ c = (a << 19) + a;
+ a = (a << 9) + c;
+ b += a;
+
+ /* Phase 2: Compute (a << 11) + (b << 6) + (c << 3) - b */
+ a <<= 5;
+ a += b; /* (a << 5) + b */
+ a <<= 3;
+ a += c; /* (a << 8) + (b << 3) + c */
+ a <<= 3;
+ return a - b; /* (a << 11) + (b << 6) + (c << 3) - b */
+#else
+ /*
+ * "This is really going to hurt."
+ *
+ * Without a barrel shifter, left shifts are implemented as
+ * repeated additions, and the best we can do is an optimal
+ * addition-subtraction chain. This one is not known to be
+ * optimal, but at 37 steps, it's decent for a 31-bit multiplier.
+ *
+ * Question: given its size (37*4 = 148 bytes per instance),
+ * and slowness, is this worth having inline?
+ */
+ unsigned int b, c, d;
+
+ b = a << 4; /* 4 */
+ c = b << 1; /* 1 5 */
+ b += a; /* 1 6 */
+ c += b; /* 1 7 */
+ c <<= 3; /* 3 10 */
+ c -= a; /* 1 11 */
+ d = c << 7; /* 7 18 */
+ d += b; /* 1 19 */
+ d <<= 8; /* 8 27 */
+ d += a; /* 1 28 */
+ d <<= 1; /* 1 29 */
+ d += b; /* 1 30 */
+ d <<= 6; /* 6 36 */
+ return d + c; /* 1 37 total instructions*/
+#endif
+}
+
+#endif /* !CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL */
+#endif /* _ASM_HASH_H */
diff --git a/arch/microblaze/include/asm/highmem.h b/arch/microblaze/include/asm/highmem.h
new file mode 100644
index 0000000000..4418633fb1
--- /dev/null
+++ b/arch/microblaze/include/asm/highmem.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/fixmap.h>
+
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+/*
+ * We use one full pte table with 4K pages. And with 16K/64K/256K pages pte
+ * table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP
+ * and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP
+ * in case of 16K/64K/256K page sizes.
+ */
+
+#define PKMAP_ORDER PTE_SHIFT
+#define LAST_PKMAP (1 << PKMAP_ORDER)
+
+#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE * (LAST_PKMAP + 1)) \
+ & PMD_MASK)
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define flush_cache_kmaps() { flush_icache(); flush_dcache(); }
+
+#define arch_kmap_local_post_map(vaddr, pteval) \
+ local_flush_tlb_page(NULL, vaddr);
+#define arch_kmap_local_post_unmap(vaddr) \
+ local_flush_tlb_page(NULL, vaddr);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
new file mode 100644
index 0000000000..c1d78b8977
--- /dev/null
+++ b/arch/microblaze/include/asm/io.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_IO_H
+#define _ASM_MICROBLAZE_IO_H
+
+#include <asm/byteorder.h>
+#include <asm/page.h>
+#include <linux/types.h>
+#include <linux/mm.h> /* Get struct page {...} */
+
+#ifndef CONFIG_PCI
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#else
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
+
+extern unsigned long isa_io_base;
+extern resource_size_t isa_mem_base;
+#endif
+
+#define PCI_IOBASE ((void __iomem *)_IO_BASE)
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+
+/* Big Endian */
+#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
+#define out_be16(a, v) __raw_writew((v), (a))
+
+#define in_be32(a) __raw_readl((const void __iomem __force *)(a))
+#define in_be16(a) __raw_readw(a)
+
+#define writel_be(v, a) out_be32((__force unsigned *)a, v)
+#define readl_be(a) in_be32((__force unsigned *)a)
+
+/* Little endian */
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
+#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
+
+#define in_le32(a) __le32_to_cpu(__raw_readl(a))
+#define in_le16(a) __le16_to_cpu(__raw_readw(a))
+
+/* Byte ops */
+#define out_8(a, v) __raw_writeb((v), (a))
+#define in_8(a) __raw_readb(a)
+
+#include <asm-generic/io.h>
+
+#endif /* _ASM_MICROBLAZE_IO_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
new file mode 100644
index 0000000000..cb6ab55d1d
--- /dev/null
+++ b/arch/microblaze/include/asm/irq.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQ_H
+#define _ASM_MICROBLAZE_IRQ_H
+
+#include <asm-generic/irq.h>
+
+struct pt_regs;
+extern void do_IRQ(struct pt_regs *regs);
+
+#endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
new file mode 100644
index 0000000000..818c6c9f55
--- /dev/null
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQFLAGS_H
+#define _ASM_MICROBLAZE_IRQFLAGS_H
+
+#include <linux/types.h>
+#include <asm/registers.h>
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+
+static inline notrace unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+ asm volatile(" msrclr %0, %1 \n"
+ " nop \n"
+ : "=r"(flags)
+ : "i"(MSR_IE)
+ : "memory");
+ return flags;
+}
+
+static inline notrace void arch_local_irq_disable(void)
+{
+ /* this uses r0 without declaring it - is that correct? */
+ asm volatile(" msrclr r0, %0 \n"
+ " nop \n"
+ :
+ : "i"(MSR_IE)
+ : "memory");
+}
+
+static inline notrace void arch_local_irq_enable(void)
+{
+ /* this uses r0 without declaring it - is that correct? */
+ asm volatile(" msrset r0, %0 \n"
+ " nop \n"
+ :
+ : "i"(MSR_IE)
+ : "memory");
+}
+
+#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+static inline notrace unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags, tmp;
+ asm volatile (" mfs %0, rmsr \n"
+ " nop \n"
+ " andi %1, %0, %2 \n"
+ " mts rmsr, %1 \n"
+ " nop \n"
+ : "=r"(flags), "=r"(tmp)
+ : "i"(~MSR_IE)
+ : "memory");
+ return flags;
+}
+
+static inline notrace void arch_local_irq_disable(void)
+{
+ unsigned long tmp;
+ asm volatile(" mfs %0, rmsr \n"
+ " nop \n"
+ " andi %0, %0, %1 \n"
+ " mts rmsr, %0 \n"
+ " nop \n"
+ : "=r"(tmp)
+ : "i"(~MSR_IE)
+ : "memory");
+}
+
+static inline notrace void arch_local_irq_enable(void)
+{
+ unsigned long tmp;
+ asm volatile(" mfs %0, rmsr \n"
+ " nop \n"
+ " ori %0, %0, %1 \n"
+ " mts rmsr, %0 \n"
+ " nop \n"
+ : "=r"(tmp)
+ : "i"(MSR_IE)
+ : "memory");
+}
+
+#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+static inline notrace unsigned long arch_local_save_flags(void)
+{
+ unsigned long flags;
+ asm volatile(" mfs %0, rmsr \n"
+ " nop \n"
+ : "=r"(flags)
+ :
+ : "memory");
+ return flags;
+}
+
+static inline notrace void arch_local_irq_restore(unsigned long flags)
+{
+ asm volatile(" mts rmsr, %0 \n"
+ " nop \n"
+ :
+ : "r"(flags)
+ : "memory");
+}
+
+static inline notrace bool arch_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags & MSR_IE) == 0;
+}
+
+static inline notrace bool arch_irqs_disabled(void)
+{
+ return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+#endif /* _ASM_MICROBLAZE_IRQFLAGS_H */
diff --git a/arch/microblaze/include/asm/kgdb.h b/arch/microblaze/include/asm/kgdb.h
new file mode 100644
index 0000000000..8dc5ebb07f
--- /dev/null
+++ b/arch/microblaze/include/asm/kgdb.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef __KERNEL__
+#ifndef __MICROBLAZE_KGDB_H__
+#define __MICROBLAZE_KGDB_H__
+
+#ifndef __ASSEMBLY__
+
+#define CACHE_FLUSH_IS_SAFE 1
+#define BUFMAX 2048
+
+/*
+ * 32 32-bit general purpose registers (r0-r31)
+ * 6 32-bit special registers (pc, msr, ear, esr, fsr, btr)
+ * 12 32-bit PVR
+ * 7 32-bit MMU Regs (redr, rpid, rzpr, rtlbx, rtlbsx, rtlblo, rtlbhi)
+ * ------
+ * 57 registers
+ */
+#define NUMREGBYTES (57 * 4)
+
+#define BREAK_INSTR_SIZE 4
+static inline void arch_kgdb_breakpoint(void)
+{
+ __asm__ __volatile__("brki r16, 0x18;");
+}
+
+struct pt_regs;
+asmlinkage void microblaze_kgdb_break(struct pt_regs *regs);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MICROBLAZE_KGDB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
new file mode 100644
index 0000000000..b928a87c00
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_H
+#define _ASM_MICROBLAZE_MMU_H
+
+# ifdef __KERNEL__
+# ifndef __ASSEMBLY__
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+ unsigned long v:1; /* Entry is valid */
+ unsigned long vsid:24; /* Virtual segment identifier */
+ unsigned long h:1; /* Hash algorithm indicator */
+ unsigned long api:6; /* Abbreviated page index */
+ unsigned long rpn:20; /* Real (physical) page number */
+ unsigned long :3; /* Unused */
+ unsigned long r:1; /* Referenced */
+ unsigned long c:1; /* Changed */
+ unsigned long w:1; /* Write-thru cache mode */
+ unsigned long i:1; /* Cache inhibited */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+# define PP_RWXX 0 /* Supervisor read/write, User none */
+# define PP_RWRX 1 /* Supervisor read/write, User read */
+# define PP_RWRW 2 /* Supervisor read/write, User read/write */
+# define PP_RXRX 3 /* Supervisor read, User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+ unsigned long t:1; /* Normal or I/O type */
+ unsigned long ks:1; /* Supervisor 'key' (normally 0) */
+ unsigned long kp:1; /* User 'key' (normally 1) */
+ unsigned long n:1; /* No-execute */
+ unsigned long :4; /* Unused */
+ unsigned long vsid:24; /* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
+extern void _tlbia(void); /* invalidate all TLB entries */
+
+/*
+ * tlb_skip size stores actual number skipped TLBs from TLB0 - every directy TLB
+ * mapping has to increase tlb_skip size.
+ */
+extern u32 tlb_skip;
+# endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+# define MICROBLAZE_TLB_SIZE 64
+
+/* For cases when you want to skip some TLB entries */
+# define MICROBLAZE_TLB_SKIP 0
+
+/* Use the last TLB for temporary access to LMB */
+# define MICROBLAZE_LMB_TLB_ID 63
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+# define TLB_LO 1
+# define TLB_HI 0
+# define TLB_DATA TLB_LO
+# define TLB_TAG TLB_HI
+
+/* Tag portion */
+# define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
+# define TLB_PAGESZ_MASK 0x00000380
+# define TLB_PAGESZ(x) (((x) & 0x7) << 7)
+# define PAGESZ_1K 0
+# define PAGESZ_4K 1
+# define PAGESZ_16K 2
+# define PAGESZ_64K 3
+# define PAGESZ_256K 4
+# define PAGESZ_1M 5
+# define PAGESZ_4M 6
+# define PAGESZ_16M 7
+# define TLB_VALID 0x00000040 /* Entry is valid */
+
+/* Data portion */
+# define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
+# define TLB_PERM_MASK 0x00000300
+# define TLB_EX 0x00000200 /* Instruction execution allowed */
+# define TLB_WR 0x00000100 /* Writes permitted */
+# define TLB_ZSEL_MASK 0x000000F0
+# define TLB_ZSEL(x) (((x) & 0xF) << 4)
+# define TLB_ATTR_MASK 0x0000000F
+# define TLB_W 0x00000008 /* Caching is write-through */
+# define TLB_I 0x00000004 /* Caching is inhibited */
+# define TLB_M 0x00000002 /* Memory is coherent */
+# define TLB_G 0x00000001 /* Memory is guarded from prefetch */
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
new file mode 100644
index 0000000000..866e52da5e
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+# include <asm/mmu_context_mm.h>
diff --git a/arch/microblaze/include/asm/mmu_context_mm.h b/arch/microblaze/include/asm/mmu_context_mm.h
new file mode 100644
index 0000000000..c2c77f7084
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_mm.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+#include <linux/atomic.h>
+#include <linux/mm_types.h>
+#include <linux/sched.h>
+
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm-generic/mm_hooks.h>
+
+# ifdef __KERNEL__
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs). We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.
+ */
+# define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+ & 0xffffff)
+
+/*
+ MicroBlaze has 256 contexts, so we can just rotate through these
+ as a way of "switching" contexts. If the TID of the TLB is zero,
+ the PID/TID comparison is disabled, so we can use a TID of zero
+ to represent all kernel pages as shared among all contexts.
+ */
+
+# define NO_CONTEXT 256
+# define LAST_CONTEXT 255
+# define FIRST_CONTEXT 1
+
+/*
+ * Set the current MMU context.
+ * This is done byloading up the segment registers for the user part of the
+ * address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * Since we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ mm_context_t ctx;
+
+ if (mm->context != NO_CONTEXT)
+ return;
+ while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+ steal_context();
+ ctx = next_mmu_context;
+ while (test_and_set_bit(ctx, context_map)) {
+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+ if (ctx > LAST_CONTEXT)
+ ctx = 0;
+ }
+ next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+ mm->context = ctx;
+ context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+# define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+#define destroy_context destroy_context
+static inline void destroy_context(struct mm_struct *mm)
+{
+ if (mm->context != NO_CONTEXT) {
+ clear_bit(mm->context, context_map);
+ mm->context = NO_CONTEXT;
+ atomic_inc(&nr_free_contexts);
+ }
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ tsk->thread.pgdir = next->pgd;
+ get_mmu_context(next);
+ set_context(next->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm activate_mm
+static inline void activate_mm(struct mm_struct *active_mm,
+ struct mm_struct *mm)
+{
+ current->thread.pgdir = mm->pgd;
+ get_mmu_context(mm);
+ set_context(mm->context, mm->pgd);
+}
+
+extern void mmu_context_init(void);
+
+#include <asm-generic/mmu_context.h>
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
new file mode 100644
index 0000000000..eda1c183b6
--- /dev/null
+++ b/arch/microblaze/include/asm/module.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_MODULE_H
+#define _ASM_MICROBLAZE_MODULE_H
+
+#include <asm-generic/module.h>
+
+/* Microblaze Relocations */
+#define R_MICROBLAZE_NONE 0
+#define R_MICROBLAZE_32 1
+#define R_MICROBLAZE_32_PCREL 2
+#define R_MICROBLAZE_64_PCREL 3
+#define R_MICROBLAZE_32_PCREL_LO 4
+#define R_MICROBLAZE_64 5
+#define R_MICROBLAZE_32_LO 6
+#define R_MICROBLAZE_SRO32 7
+#define R_MICROBLAZE_SRW32 8
+#define R_MICROBLAZE_64_NONE 9
+#define R_MICROBLAZE_32_SYM_OP_SYM 10
+/* Keep this the last entry. */
+#define R_MICROBLAZE_NUM 11
+
+typedef struct { volatile int counter; } module_t;
+
+#endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
new file mode 100644
index 0000000000..86a4ce07c1
--- /dev/null
+++ b/arch/microblaze/include/asm/page.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * VM ops
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Changes for MMU support:
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_MICROBLAZE_PAGE_H
+#define _ASM_MICROBLAZE_PAGE_H
+
+#include <linux/pfn.h>
+#include <asm/setup.h>
+#include <asm/asm-compat.h>
+#include <linux/const.h>
+
+#ifdef __KERNEL__
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
+
+#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. With MMU
+ * it is set to the kernel start address (aligned on a page boundary).
+ *
+ * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
+ * in arch/microblaze/Makefile.
+ */
+#define PAGE_OFFSET CONFIG_KERNEL_START
+
+/*
+ * The basic type of a PTE - 32 bit physical addressing.
+ */
+typedef unsigned long pte_basic_t;
+#define PTE_FMT "%.8lx"
+
+# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
+# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
+
+# define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
+# define copy_user_page(vto, vfrom, vaddr, topg) \
+ memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct page *pgtable_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+/* FIXME this can depend on linux kernel version */
+typedef struct { unsigned long pgd; } pgd_t;
+
+# define pte_val(x) ((x).pte)
+# define pgprot_val(x) ((x).pgprot)
+
+# define pgd_val(x) ((x).pgd)
+
+# define __pte(x) ((pte_t) { (x) })
+# define __pgd(x) ((pgd_t) { (x) })
+# define __pgprot(x) ((pgprot_t) { (x) })
+
+/**
+ * Conversions for virtual address, physical address, pfn, and struct
+ * page are defined in the following files.
+ *
+ * virt -+
+ * | asm-microblaze/page.h
+ * phys -+
+ * | linux/pfn.h
+ * pfn -+
+ * | asm-generic/memory_model.h
+ * page -+
+ *
+ */
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+extern unsigned long memory_start;
+extern unsigned long memory_size;
+extern unsigned long lowmem_size;
+
+extern unsigned long kernel_tlb;
+
+extern int page_is_ram(unsigned long pfn);
+
+# define phys_to_pfn(phys) (PFN_DOWN(phys))
+# define pfn_to_phys(pfn) (PFN_PHYS(pfn))
+
+# define virt_to_page(kaddr) (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+# define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
+# define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+# define ARCH_PFN_OFFSET (memory_start >> PAGE_SHIFT)
+# endif /* __ASSEMBLY__ */
+
+/* Convert between virtual and physical address for MMU. */
+/* Handle MicroBlaze processor with virtual memory. */
+#define __virt_to_phys(addr) \
+ ((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define __phys_to_virt(addr) \
+ ((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#define tophys(rd, rs) \
+ addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define tovirt(rd, rs) \
+ addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+
+#ifndef __ASSEMBLY__
+
+# define __pa(x) __virt_to_phys((unsigned long)(x))
+# define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))
+
+static inline unsigned long virt_to_pfn(const void *vaddr)
+{
+ return phys_to_pfn(__pa(vaddr));
+}
+
+static inline const void *pfn_to_virt(unsigned long pfn)
+{
+ return __va(pfn_to_phys((pfn)));
+}
+
+#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr)))
+
+#endif /* __ASSEMBLY__ */
+
+#define TOPHYS(addr) __virt_to_phys(addr)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_MICROBLAZE_PAGE_H */
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
new file mode 100644
index 0000000000..be5f504bea
--- /dev/null
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
+#define _ASM_MICROBLAZE_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ */
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+#ifdef CONFIG_PCI
+extern struct list_head hose_list;
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ struct pci_bus *bus;
+ struct list_head list_node;
+
+ void __iomem *io_base_virt;
+
+ /* Currently, we limit ourselves to 1 IO range and 3 mem
+ * ranges since the common pci_bus structure can't handle more
+ */
+ struct resource io_resource;
+};
+
+#ifdef CONFIG_PCI
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+ /* No specific ISA handling on ppc32 at this stage, it
+ * all goes through PCI
+ */
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
new file mode 100644
index 0000000000..91f1f71c26
--- /dev/null
+++ b/arch/microblaze/include/asm/pci.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ * Based on powerpc version
+ */
+
+#ifndef __ASM_MICROBLAZE_PCI_H
+#define __ASM_MICROBLAZE_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x10000000
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses() 0
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+/* Tell PCI code what kind of PCI resource mappings we support */
+#define HAVE_PCI_MMAP 1
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1
+
+struct file;
+
+static inline void __init xilinx_pci_init(void) { return; }
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_PCI_H */
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
new file mode 100644
index 0000000000..6c33b05f73
--- /dev/null
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGALLOC_H
+#define _ASM_MICROBLAZE_PGALLOC_H
+
+#include <linux/kernel.h> /* For min/max macros */
+#include <linux/highmem.h>
+#include <linux/pgtable.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL
+#include <asm-generic/pgalloc.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+static inline pgd_t *get_pgd(void)
+{
+ return (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, 0);
+}
+
+#define pgd_alloc(mm) get_pgd()
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm);
+
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte))
+
+#define pmd_populate(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long)page_address(pte))
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long) (pte))
+
+#endif /* _ASM_MICROBLAZE_PGALLOC_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
new file mode 100644
index 0000000000..3042eb98bb
--- /dev/null
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -0,0 +1,455 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGTABLE_H
+#define _ASM_MICROBLAZE_PGTABLE_H
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+extern int mem_init_done;
+#endif
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+/* Start and end of the vmalloc area. */
+/* Make sure to map the vmalloc area above the pinned kernel memory area
+ of 32Mb. */
+#define VMALLOC_START (CONFIG_KERNEL_START + CONFIG_LOWMEM_SIZE)
+#define VMALLOC_END ioremap_bot
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL (_PAGE_GUARDED | _PAGE_NO_CACHE | \
+ _PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot) \
+ (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+ _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) \
+ (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+ _PAGE_NO_CACHE))
+
+/*
+ * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
+ * table containing PTEs, together with a set of 16 segment registers, to
+ * define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings. We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code. Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
+ *
+ */
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE (1 << PTE_SHIFT)
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Bits in a linux-style PTE. These match the bits in the
+ * (hardware-defined) PTE as closely as possible.
+ */
+
+/* There are several potential gotchas here. The hardware TLBLO
+ * field looks like this:
+ *
+ * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN..................... 0 0 EX WR ZSEL....... W I M G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler. Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap PTEs use the top
+ * 30 bits. Because 4xx doesn't support SMP anyway, M is irrelevant so we
+ * borrow it for PAGE_PRESENT. Bit 30 is cleared in the TLB miss handler
+ * before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ * * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits. We actually use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+/* Definitions for MicroBlaze. */
+#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
+#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
+#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
+#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_RW 0x040 /* software: Writes permitted */
+#define _PAGE_DIRTY 0x080 /* software: dirty page */
+#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
+#define _PMD_PRESENT PAGE_MASK
+
+/* We borrow bit 24 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE _PAGE_DIRTY
+
+/*
+ * Some bits are unused...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE 0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED 0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC 0
+#endif
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose. -- paulus.
+ */
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+
+#define _PAGE_KERNEL \
+ (_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
+
+#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+
+#define PAGE_NONE __pgprot(_PAGE_BASE)
+#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X \
+ __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL __pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_SHARED)
+#define PAGE_KERNEL_CI __pgprot(_PAGE_IO)
+
+/*
+ * We consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep) \
+ do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) ((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define pmd_present(pmd) ((pmd_val(pmd) & _PMD_PRESENT) != 0)
+#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#define pte_page(x) (mem_map + (unsigned long) \
+ ((pte_val(x) - memory_start) >> PAGE_SHIFT))
+#define PFN_PTE_SHIFT PAGE_SHIFT
+
+#define pte_pfn(x) (pte_val(x) >> PFN_PTE_SHIFT)
+
+#define pfn_pte(pfn, prot) \
+ __pte(((pte_basic_t)(pfn) << PFN_PTE_SHIFT) | pgprot_val(prot))
+
+#ifndef __ASSEMBLY__
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) \
+ { pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) \
+ { pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) \
+ { pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) \
+ { pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) \
+ { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) \
+ { pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) \
+ { pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite_novma(pte_t pte) \
+ { pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) \
+ { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) \
+ { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
+{
+ pte_t pte;
+ pte_val(pte) = physpage | pgprot_val(pgprot);
+ return pte;
+}
+
+#define mk_pte(page, pgprot) \
+({ \
+ pte_t pte; \
+ pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) | \
+ pgprot_val(pgprot); \
+ pte; \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+ unsigned long set)
+{
+ unsigned long flags, old, tmp;
+
+ raw_local_irq_save(flags);
+
+ __asm__ __volatile__( "lw %0, %2, r0 \n"
+ "andn %1, %0, %3 \n"
+ "or %1, %1, %4 \n"
+ "sw %1, %2, r0 \n"
+ : "=&r" (old), "=&r" (tmp)
+ : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
+ : "cc");
+
+ raw_local_irq_restore(flags);
+
+ return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+ *ptep = pte;
+}
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)
+{
+ return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
+}
+
+static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ return (pte_update(ptep, \
+ (_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}*/
+
+static inline void ptep_mkdirty(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_update(ptep, 0, _PAGE_DIRTY);
+}
+
+/*#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
+
+/* Convert pmd entry to page */
+/* our pmd entry is an effective address of pte table*/
+/* returns effective address of the pmd entry*/
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+ return ((unsigned long) (pmd_val(pmd) & PAGE_MASK));
+}
+
+/* returns pfn of the pmd entry*/
+#define pmd_pfn(pmd) (__pa(pmd_val(pmd)) >> PAGE_SHIFT)
+
+/* returns struct *page of the pmd entry*/
+#define pmd_page(pmd) (pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+
+/* Find an entry in the third-level page table.. */
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * <------------------ offset -------------------> E < type -> 0 0
+ *
+ * E is the exclusive marker that is not stored in swap entries.
+ */
+#define __swp_type(entry) ((entry).val & 0x1f)
+#define __swp_offset(entry) ((entry).val >> 6)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { ((type) & 0x1f) | ((offset) << 6) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 })
+
+static inline int pte_swp_exclusive(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+ return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+ return pte;
+}
+
+extern unsigned long iopa(unsigned long addr);
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ * compilation errors.
+ */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_NO_COPYBACK 3
+
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code);
+
+void mapin_ram(void);
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+extern int mem_init_done;
+
+asmlinkage void __init mmu_init(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#ifndef __ASSEMBLY__
+extern unsigned long ioremap_bot, ioremap_base;
+
+void setup_memory(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_PGTABLE_H */
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
new file mode 100644
index 0000000000..4e193c7550
--- /dev/null
+++ b/arch/microblaze/include/asm/processor.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROCESSOR_H
+#define _ASM_MICROBLAZE_PROCESSOR_H
+
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+#include <asm/registers.h>
+#include <asm/entry.h>
+#include <asm/current.h>
+
+# ifndef __ASSEMBLY__
+/* from kernel/cpu/mb.c */
+extern const struct seq_operations cpuinfo_op;
+
+# define cpu_relax() barrier()
+
+#define task_pt_regs(tsk) \
+ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
+extern void ret_from_fork(void);
+extern void ret_from_kernel_thread(void);
+
+# endif /* __ASSEMBLY__ */
+
+/*
+ * This is used to define STACK_TOP, and with MMU it must be below
+ * kernel base to select the correct PGD when handling MMU exceptions.
+ */
+# define TASK_SIZE (CONFIG_KERNEL_START)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+# define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
+
+# define THREAD_KSP 0
+
+# ifndef __ASSEMBLY__
+
+/* If you change this, you must change the associated assembly-languages
+ * constants defined below, THREAD_*.
+ */
+struct thread_struct {
+ /* kernel stack pointer (must be first field in structure) */
+ unsigned long ksp;
+ unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */
+ void *pgdir; /* root of page-table tree */
+ struct pt_regs *regs; /* Pointer to saved register state */
+};
+
+# define INIT_THREAD { \
+ .ksp = sizeof init_stack + (unsigned long)init_stack, \
+ .pgdir = swapper_pg_dir, \
+}
+
+unsigned long __get_wchan(struct task_struct *p);
+
+/* The size allocated for kernel stacks. This _must_ be a power of two! */
+# define KERNEL_STACK_SIZE 0x2000
+
+/* Return some info about the user process TASK. */
+# define task_tos(task) ((unsigned long)(task) + KERNEL_STACK_SIZE)
+# define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
+
+# define task_pt_regs_plus_args(tsk) \
+ ((void *)task_pt_regs(tsk))
+
+# define task_sp(task) (task_regs(task)->r1)
+# define task_pc(task) (task_regs(task)->pc)
+/* Grotty old names for some. */
+# define KSTK_EIP(task) (task_pc(task))
+# define KSTK_ESP(task) (task_sp(task))
+
+# define STACK_TOP TASK_SIZE
+# define STACK_TOP_MAX STACK_TOP
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *of_debugfs_root;
+#endif
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
new file mode 100644
index 0000000000..bfcb89df5e
--- /dev/null
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_PTRACE_H
+#define _ASM_MICROBLAZE_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+#define kernel_mode(regs) ((regs)->pt_mode)
+#define user_mode(regs) (!kernel_mode(regs))
+
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+#define user_stack_pointer(regs) ((regs)->r1)
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+ return regs->r3;
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h
new file mode 100644
index 0000000000..186ee8c3c8
--- /dev/null
+++ b/arch/microblaze/include/asm/pvr.h
@@ -0,0 +1,224 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Support for the MicroBlaze PVR (Processor Version Register)
+ *
+ * Copyright (C) 2009 - 2011 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * Copyright (C) 2007 - 2011 PetaLogix
+ */
+
+#ifndef _ASM_MICROBLAZE_PVR_H
+#define _ASM_MICROBLAZE_PVR_H
+
+#define PVR_MSR_BIT 0x400
+
+struct pvr_s {
+ unsigned pvr[12];
+};
+
+/* The following taken from Xilinx's standalone BSP pvr.h */
+
+/* Basic PVR mask */
+#define PVR0_PVR_FULL_MASK 0x80000000
+#define PVR0_USE_BARREL_MASK 0x40000000
+#define PVR0_USE_DIV_MASK 0x20000000
+#define PVR0_USE_HW_MUL_MASK 0x10000000
+#define PVR0_USE_FPU_MASK 0x08000000
+#define PVR0_USE_EXC_MASK 0x04000000
+#define PVR0_USE_ICACHE_MASK 0x02000000
+#define PVR0_USE_DCACHE_MASK 0x01000000
+#define PVR0_USE_MMU 0x00800000
+#define PVR0_USE_BTC 0x00400000
+#define PVR0_ENDI 0x00200000
+#define PVR0_VERSION_MASK 0x0000FF00
+#define PVR0_USER1_MASK 0x000000FF
+
+/* User 2 PVR mask */
+#define PVR1_USER2_MASK 0xFFFFFFFF
+
+/* Configuration PVR masks */
+#define PVR2_D_OPB_MASK 0x80000000 /* or AXI */
+#define PVR2_D_LMB_MASK 0x40000000
+#define PVR2_I_OPB_MASK 0x20000000 /* or AXI */
+#define PVR2_I_LMB_MASK 0x10000000
+#define PVR2_INTERRUPT_IS_EDGE_MASK 0x08000000
+#define PVR2_EDGE_IS_POSITIVE_MASK 0x04000000
+#define PVR2_D_PLB_MASK 0x02000000 /* new */
+#define PVR2_I_PLB_MASK 0x01000000 /* new */
+#define PVR2_INTERCONNECT 0x00800000 /* new */
+#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */
+#define PVR2_USE_FSL_EXC 0x00040000 /* new */
+#define PVR2_USE_MSR_INSTR 0x00020000
+#define PVR2_USE_PCMP_INSTR 0x00010000
+#define PVR2_AREA_OPTIMISED 0x00008000
+#define PVR2_USE_BARREL_MASK 0x00004000
+#define PVR2_USE_DIV_MASK 0x00002000
+#define PVR2_USE_HW_MUL_MASK 0x00001000
+#define PVR2_USE_FPU_MASK 0x00000800
+#define PVR2_USE_MUL64_MASK 0x00000400
+#define PVR2_USE_FPU2_MASK 0x00000200 /* new */
+#define PVR2_USE_IPLBEXC 0x00000100
+#define PVR2_USE_DPLBEXC 0x00000080
+#define PVR2_OPCODE_0x0_ILL_MASK 0x00000040
+#define PVR2_UNALIGNED_EXC_MASK 0x00000020
+#define PVR2_ILL_OPCODE_EXC_MASK 0x00000010
+#define PVR2_IOPB_BUS_EXC_MASK 0x00000008 /* or AXI */
+#define PVR2_DOPB_BUS_EXC_MASK 0x00000004 /* or AXI */
+#define PVR2_DIV_ZERO_EXC_MASK 0x00000002
+#define PVR2_FPU_EXC_MASK 0x00000001
+
+/* Debug and exception PVR masks */
+#define PVR3_DEBUG_ENABLED_MASK 0x80000000
+#define PVR3_NUMBER_OF_PC_BRK_MASK 0x1E000000
+#define PVR3_NUMBER_OF_RD_ADDR_BRK_MASK 0x00380000
+#define PVR3_NUMBER_OF_WR_ADDR_BRK_MASK 0x0000E000
+#define PVR3_FSL_LINKS_MASK 0x00000380
+
+/* ICache config PVR masks */
+#define PVR4_USE_ICACHE_MASK 0x80000000 /* ICU */
+#define PVR4_ICACHE_ADDR_TAG_BITS_MASK 0x7C000000 /* ICTS */
+#define PVR4_ICACHE_ALLOW_WR_MASK 0x01000000 /* ICW */
+#define PVR4_ICACHE_LINE_LEN_MASK 0x00E00000 /* ICLL */
+#define PVR4_ICACHE_BYTE_SIZE_MASK 0x001F0000 /* ICBS */
+#define PVR4_ICACHE_ALWAYS_USED 0x00008000 /* IAU */
+#define PVR4_ICACHE_INTERFACE 0x00002000 /* ICI */
+
+/* DCache config PVR masks */
+#define PVR5_USE_DCACHE_MASK 0x80000000 /* DCU */
+#define PVR5_DCACHE_ADDR_TAG_BITS_MASK 0x7C000000 /* DCTS */
+#define PVR5_DCACHE_ALLOW_WR_MASK 0x01000000 /* DCW */
+#define PVR5_DCACHE_LINE_LEN_MASK 0x00E00000 /* DCLL */
+#define PVR5_DCACHE_BYTE_SIZE_MASK 0x001F0000 /* DCBS */
+#define PVR5_DCACHE_ALWAYS_USED 0x00008000 /* DAU */
+#define PVR5_DCACHE_USE_WRITEBACK 0x00004000 /* DWB */
+#define PVR5_DCACHE_INTERFACE 0x00002000 /* DCI */
+
+/* ICache base address PVR mask */
+#define PVR6_ICACHE_BASEADDR_MASK 0xFFFFFFFF
+
+/* ICache high address PVR mask */
+#define PVR7_ICACHE_HIGHADDR_MASK 0xFFFFFFFF
+
+/* DCache base address PVR mask */
+#define PVR8_DCACHE_BASEADDR_MASK 0xFFFFFFFF
+
+/* DCache high address PVR mask */
+#define PVR9_DCACHE_HIGHADDR_MASK 0xFFFFFFFF
+
+/* Target family PVR mask */
+#define PVR10_TARGET_FAMILY_MASK 0xFF000000
+
+/* MMU description */
+#define PVR11_USE_MMU 0xC0000000
+#define PVR11_MMU_ITLB_SIZE 0x38000000
+#define PVR11_MMU_DTLB_SIZE 0x07000000
+#define PVR11_MMU_TLB_ACCESS 0x00C00000
+#define PVR11_MMU_ZONES 0x003C0000
+#define PVR11_MMU_PRIVINS 0x00010000
+/* MSR Reset value PVR mask */
+#define PVR11_MSR_RESET_VALUE_MASK 0x000007FF
+
+/* PVR access macros */
+#define PVR_IS_FULL(_pvr) (_pvr.pvr[0] & PVR0_PVR_FULL_MASK)
+#define PVR_USE_BARREL(_pvr) (_pvr.pvr[0] & PVR0_USE_BARREL_MASK)
+#define PVR_USE_DIV(_pvr) (_pvr.pvr[0] & PVR0_USE_DIV_MASK)
+#define PVR_USE_HW_MUL(_pvr) (_pvr.pvr[0] & PVR0_USE_HW_MUL_MASK)
+#define PVR_USE_FPU(_pvr) (_pvr.pvr[0] & PVR0_USE_FPU_MASK)
+#define PVR_USE_FPU2(_pvr) (_pvr.pvr[2] & PVR2_USE_FPU2_MASK)
+#define PVR_USE_ICACHE(_pvr) (_pvr.pvr[0] & PVR0_USE_ICACHE_MASK)
+#define PVR_USE_DCACHE(_pvr) (_pvr.pvr[0] & PVR0_USE_DCACHE_MASK)
+#define PVR_VERSION(_pvr) ((_pvr.pvr[0] & PVR0_VERSION_MASK) >> 8)
+#define PVR_USER1(_pvr) (_pvr.pvr[0] & PVR0_USER1_MASK)
+#define PVR_USER2(_pvr) (_pvr.pvr[1] & PVR1_USER2_MASK)
+
+#define PVR_D_OPB(_pvr) (_pvr.pvr[2] & PVR2_D_OPB_MASK)
+#define PVR_D_LMB(_pvr) (_pvr.pvr[2] & PVR2_D_LMB_MASK)
+#define PVR_I_OPB(_pvr) (_pvr.pvr[2] & PVR2_I_OPB_MASK)
+#define PVR_I_LMB(_pvr) (_pvr.pvr[2] & PVR2_I_LMB_MASK)
+#define PVR_INTERRUPT_IS_EDGE(_pvr) \
+ (_pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK)
+#define PVR_EDGE_IS_POSITIVE(_pvr) \
+ (_pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK)
+#define PVR_USE_MSR_INSTR(_pvr) (_pvr.pvr[2] & PVR2_USE_MSR_INSTR)
+#define PVR_USE_PCMP_INSTR(_pvr) (_pvr.pvr[2] & PVR2_USE_PCMP_INSTR)
+#define PVR_AREA_OPTIMISED(_pvr) (_pvr.pvr[2] & PVR2_AREA_OPTIMISED)
+#define PVR_USE_MUL64(_pvr) (_pvr.pvr[2] & PVR2_USE_MUL64_MASK)
+#define PVR_OPCODE_0x0_ILLEGAL(_pvr) \
+ (_pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK)
+#define PVR_UNALIGNED_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK)
+#define PVR_ILL_OPCODE_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK)
+#define PVR_IOPB_BUS_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK)
+#define PVR_DOPB_BUS_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK)
+#define PVR_DIV_ZERO_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK)
+#define PVR_FPU_EXCEPTION(_pvr) (_pvr.pvr[2] & PVR2_FPU_EXC_MASK)
+#define PVR_FSL_EXCEPTION(_pvr) (_pvr.pvr[2] & PVR2_USE_EXTEND_FSL)
+
+#define PVR_DEBUG_ENABLED(_pvr) (_pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK)
+#define PVR_NUMBER_OF_PC_BRK(_pvr) \
+ ((_pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25)
+#define PVR_NUMBER_OF_RD_ADDR_BRK(_pvr) \
+ ((_pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19)
+#define PVR_NUMBER_OF_WR_ADDR_BRK(_pvr) \
+ ((_pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13)
+#define PVR_FSL_LINKS(_pvr) ((_pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7)
+
+#define PVR_ICACHE_ADDR_TAG_BITS(_pvr) \
+ ((_pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_ICACHE_USE_FSL(_pvr) \
+ (_pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK)
+#define PVR_ICACHE_ALLOW_WR(_pvr) \
+ (_pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK)
+#define PVR_ICACHE_LINE_LEN(_pvr) \
+ (1 << ((_pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21))
+#define PVR_ICACHE_BYTE_SIZE(_pvr) \
+ (1 << ((_pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16))
+
+#define PVR_DCACHE_ADDR_TAG_BITS(_pvr) \
+ ((_pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_DCACHE_USE_FSL(_pvr) (_pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
+#define PVR_DCACHE_ALLOW_WR(_pvr) \
+ (_pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
+/* FIXME two shifts on one line needs any comment */
+#define PVR_DCACHE_LINE_LEN(_pvr) \
+ (1 << ((_pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
+#define PVR_DCACHE_BYTE_SIZE(_pvr) \
+ (1 << ((_pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
+
+#define PVR_DCACHE_USE_WRITEBACK(_pvr) \
+ ((_pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14)
+
+#define PVR_ICACHE_BASEADDR(_pvr) \
+ (_pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
+#define PVR_ICACHE_HIGHADDR(_pvr) \
+ (_pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
+#define PVR_DCACHE_BASEADDR(_pvr) \
+ (_pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK)
+#define PVR_DCACHE_HIGHADDR(_pvr) \
+ (_pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK)
+
+#define PVR_TARGET_FAMILY(_pvr) \
+ ((_pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24)
+
+#define PVR_MSR_RESET_VALUE(_pvr) \
+ (_pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK)
+
+/* mmu */
+#define PVR_USE_MMU(_pvr) ((_pvr.pvr[11] & PVR11_USE_MMU) >> 30)
+#define PVR_MMU_ITLB_SIZE(_pvr) (_pvr.pvr[11] & PVR11_MMU_ITLB_SIZE)
+#define PVR_MMU_DTLB_SIZE(_pvr) (_pvr.pvr[11] & PVR11_MMU_DTLB_SIZE)
+#define PVR_MMU_TLB_ACCESS(_pvr) (_pvr.pvr[11] & PVR11_MMU_TLB_ACCESS)
+#define PVR_MMU_ZONES(_pvr) (_pvr.pvr[11] & PVR11_MMU_ZONES)
+#define PVR_MMU_PRIVINS(pvr) (pvr.pvr[11] & PVR11_MMU_PRIVINS)
+
+/* endian */
+#define PVR_ENDIAN(_pvr) (_pvr.pvr[0] & PVR0_ENDI)
+
+int cpu_has_pvr(void);
+void get_pvr(struct pvr_s *pvr);
+
+#endif /* _ASM_MICROBLAZE_PVR_H */
diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h
new file mode 100644
index 0000000000..6b36693fc6
--- /dev/null
+++ b/arch/microblaze/include/asm/registers.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_REGISTERS_H
+#define _ASM_MICROBLAZE_REGISTERS_H
+
+#define MSR_BE (1<<0) /* 0x001 */
+#define MSR_IE (1<<1) /* 0x002 */
+#define MSR_C (1<<2) /* 0x004 */
+#define MSR_BIP (1<<3) /* 0x008 */
+#define MSR_FSL (1<<4) /* 0x010 */
+#define MSR_ICE (1<<5) /* 0x020 */
+#define MSR_DZ (1<<6) /* 0x040 */
+#define MSR_DCE (1<<7) /* 0x080 */
+#define MSR_EE (1<<8) /* 0x100 */
+#define MSR_EIP (1<<9) /* 0x200 */
+#define MSR_CC (1<<31)
+
+/* Floating Point Status Register (FSR) Bits */
+#define FSR_IO (1<<4) /* Invalid operation */
+#define FSR_DZ (1<<3) /* Divide-by-zero */
+#define FSR_OF (1<<2) /* Overflow */
+#define FSR_UF (1<<1) /* Underflow */
+#define FSR_DO (1<<0) /* Denormalized operand error */
+
+/* Machine State Register (MSR) Fields */
+# define MSR_UM (1<<11) /* User Mode */
+# define MSR_UMS (1<<12) /* User Mode Save */
+# define MSR_VM (1<<13) /* Virtual Mode */
+# define MSR_VMS (1<<14) /* Virtual Mode Save */
+
+# define MSR_KERNEL (MSR_EE | MSR_VM)
+/* # define MSR_USER (MSR_KERNEL | MSR_UM | MSR_IE) */
+# define MSR_KERNEL_VMS (MSR_EE | MSR_VMS)
+/* # define MSR_USER_VMS (MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
+
+/* Exception State Register (ESR) Fields */
+# define ESR_DIZ (1<<11) /* Zone Protection */
+# define ESR_S (1<<10) /* Store instruction */
+
+#endif /* _ASM_MICROBLAZE_REGISTERS_H */
diff --git a/arch/microblaze/include/asm/seccomp.h b/arch/microblaze/include/asm/seccomp.h
new file mode 100644
index 0000000000..95cdcabee2
--- /dev/null
+++ b/arch/microblaze/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_SECCOMP_H
+#define _ASM_MICROBLAZE_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_sigreturn __NR_sigreturn
+
+#include <asm-generic/seccomp.h>
+
+#endif /* _ASM_MICROBLAZE_SECCOMP_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
new file mode 100644
index 0000000000..a9311ad84a
--- /dev/null
+++ b/arch/microblaze/include/asm/sections.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_SECTIONS_H
+#define _ASM_MICROBLAZE_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+# ifndef __ASSEMBLY__
+extern char _ssbss[], _esbss[];
+extern unsigned long __ivt_start[], __ivt_end[];
+
+extern u32 _fdt_start[], _fdt_end[];
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SECTIONS_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
new file mode 100644
index 0000000000..bf2600f759
--- /dev/null
+++ b/arch/microblaze/include/asm/setup.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_SETUP_H
+#define _ASM_MICROBLAZE_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+# ifndef __ASSEMBLY__
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+extern char *klimit;
+
+extern void mmu_reset(void);
+
+void machine_early_init(const char *cmdline, unsigned int ram,
+ unsigned int fdt, unsigned int msr, unsigned int tlb0,
+ unsigned int tlb1);
+
+void machine_restart(char *cmd);
+void machine_shutdown(void);
+void machine_halt(void);
+void machine_power_off(void);
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/string.h b/arch/microblaze/include/asm/string.h
new file mode 100644
index 0000000000..8798ad2c13
--- /dev/null
+++ b/arch/microblaze/include/asm/string.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_STRING_H
+#define _ASM_MICROBLAZE_STRING_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_STRING_H */
diff --git a/arch/microblaze/include/asm/switch_to.h b/arch/microblaze/include/asm/switch_to.h
new file mode 100644
index 0000000000..5afd6d9977
--- /dev/null
+++ b/arch/microblaze/include/asm/switch_to.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_SWITCH_TO_H
+#define _ASM_MICROBLAZE_SWITCH_TO_H
+
+struct task_struct;
+struct thread_info;
+
+extern struct task_struct *_switch_to(struct thread_info *prev,
+ struct thread_info *next);
+
+#define switch_to(prev, next, last) \
+ do { \
+ (last) = _switch_to(task_thread_info(prev), \
+ task_thread_info(next)); \
+ } while (0)
+
+#endif /* _ASM_MICROBLAZE_SWITCH_TO_H */
diff --git a/arch/microblaze/include/asm/syscall.h b/arch/microblaze/include/asm/syscall.h
new file mode 100644
index 0000000000..5eb3f624cc
--- /dev/null
+++ b/arch/microblaze/include/asm/syscall.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MICROBLAZE_SYSCALL_H
+#define __ASM_MICROBLAZE_SYSCALL_H
+
+#include <uapi/linux/audit.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R12 */
+static inline long syscall_get_nr(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r12;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ /* TODO. */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r3;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ if (error)
+ regs->r3 = -error;
+ else
+ regs->r3 = val;
+}
+
+static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs,
+ unsigned int n)
+{
+ switch (n) {
+ case 5: return regs->r10;
+ case 4: return regs->r9;
+ case 3: return regs->r8;
+ case 2: return regs->r7;
+ case 1: return regs->r6;
+ case 0: return regs->r5;
+ default:
+ BUG();
+ }
+ return ~0;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned long *args)
+{
+ unsigned int i = 0;
+ unsigned int n = 6;
+
+ while (n--)
+ *args++ = microblaze_get_syscall_arg(regs, i++);
+}
+
+asmlinkage unsigned long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+static inline int syscall_get_arch(struct task_struct *task)
+{
+ return AUDIT_ARCH_MICROBLAZE;
+}
+#endif /* __ASM_MICROBLAZE_SYSCALL_H */
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
new file mode 100644
index 0000000000..a0ddd2a36f
--- /dev/null
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_THREAD_INFO_H
+#define _ASM_MICROBLAZE_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* we have 8k stack */
+#define THREAD_SHIFT 13
+#define THREAD_SIZE (1 << THREAD_SHIFT)
+#define THREAD_SIZE_ORDER 1
+
+#ifndef __ASSEMBLY__
+# include <linux/types.h>
+# include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+
+struct cpu_context {
+ __u32 r1; /* stack pointer */
+ __u32 r2;
+ /* dedicated registers */
+ __u32 r13;
+ __u32 r14;
+ __u32 r15;
+ __u32 r16;
+ __u32 r17;
+ __u32 r18;
+ /* non-volatile registers */
+ __u32 r19;
+ __u32 r20;
+ __u32 r21;
+ __u32 r22;
+ __u32 r23;
+ __u32 r24;
+ __u32 r25;
+ __u32 r26;
+ __u32 r27;
+ __u32 r28;
+ __u32 r29;
+ __u32 r30;
+ /* r31 is used as current task pointer */
+ /* special purpose registers */
+ __u32 msr;
+ __u32 ear;
+ __u32 esr;
+ __u32 fsr;
+};
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ unsigned long flags; /* low level flags */
+ unsigned long status; /* thread-synchronous flags */
+ __u32 cpu; /* current CPU */
+ __s32 preempt_count; /* 0 => preemptable,< 0 => BUG*/
+
+ struct cpu_context cpu_context;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+}
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ register unsigned long sp asm("r1");
+
+ return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+/* thread information allocation */
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may
+ * need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+/* restore singlestep on return to user mode */
+#define TIF_SINGLESTEP 4
+#define TIF_NOTIFY_SIGNAL 5 /* signal notifications exist */
+#define TIF_MEMDIE 6 /* is terminating due to OOM killer */
+#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
+#define TIF_SECCOMP 10 /* secure computing */
+
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_POLLING_NRFLAG 16
+
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+ _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK 0x0000FFFE
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK 0x0000FFFF
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+/* FPU was used by this task this quantum (SMP) */
+#define TS_USEDFPU 0x0001
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
new file mode 100644
index 0000000000..e99cc29cbe
--- /dev/null
+++ b/arch/microblaze/include/asm/timex.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_TIMEX_H
+#define _ASM_MICROBLAZE_TIMEX_H
+
+#include <asm-generic/timex.h>
+
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
+
+#endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
new file mode 100644
index 0000000000..a31ae9d440
--- /dev/null
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
+#define _ASM_MICROBLAZE_TLBFLUSH_H
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#define __tlbia() { preempt_disable(); _tlbia(); preempt_enable(); }
+#define __tlbie(x) { _tlbie(x); }
+
+static inline void local_flush_tlb_all(void)
+ { __tlbia(); }
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+ { __tlbia(); }
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+ { __tlbie(vmaddr); }
+static inline void local_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+ { __tlbia(); }
+
+#define flush_tlb_kernel_range(start, end) do { } while (0)
+
+#define update_mmu_cache_range(vmf, vma, addr, ptep, nr) do { } while (0)
+#define update_mmu_cache(vma, addr, pte) \
+ update_mmu_cache_range(NULL, vma, addr, ptep, 1)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages. We don't need to do anything here, there's nothing special
+ * about our page-table pages. -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+ unsigned long start, unsigned long end) { }
+
+#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
new file mode 100644
index 0000000000..3aab2f17e0
--- /dev/null
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -0,0 +1,269 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_UACCESS_H
+#define _ASM_MICROBLAZE_UACCESS_H
+
+#include <linux/kernel.h>
+
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <linux/pgtable.h>
+#include <asm/extable.h>
+#include <linux/string.h>
+#include <asm-generic/access_ok.h>
+
+# define __FIXUP_SECTION ".section .fixup,\"ax\"\n"
+# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n"
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+ const void __user *from, unsigned long size);
+
+/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */
+static inline unsigned long __must_check __clear_user(void __user *to,
+ unsigned long n)
+{
+ /* normal memset with two words to __ex_table */
+ __asm__ __volatile__ ( \
+ "1: sb r0, %1, r0;" \
+ " addik %0, %0, -1;" \
+ " bneid %0, 1b;" \
+ " addik %1, %1, 1;" \
+ "2: " \
+ __EX_TABLE_SECTION \
+ ".word 1b,2b;" \
+ ".previous;" \
+ : "=r"(n), "=r"(to) \
+ : "0"(n), "1"(to)
+ );
+ return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+ unsigned long n)
+{
+ might_fault();
+ if (unlikely(!access_ok(to, n)))
+ return n;
+
+ return __clear_user(to, n);
+}
+
+/* put_user and get_user macros */
+extern long __user_bad(void);
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ ( \
+ "1:" insn " %1, %2, r0;" \
+ " addk %0, r0, r0;" \
+ "2: " \
+ __FIXUP_SECTION \
+ "3: brid 2b;" \
+ " addik %0, r0, %3;" \
+ ".previous;" \
+ __EX_TABLE_SECTION \
+ ".word 1b,3b;" \
+ ".previous;" \
+ : "=&r"(__gu_err), "=r"(__gu_val) \
+ : "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep if pagefaults are
+ * enabled.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x, ptr) ({ \
+ const typeof(*(ptr)) __user *__gu_ptr = (ptr); \
+ access_ok(__gu_ptr, sizeof(*__gu_ptr)) ? \
+ __get_user(x, __gu_ptr) : -EFAULT; \
+})
+
+#define __get_user(x, ptr) \
+({ \
+ long __gu_err; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_asm("lbu", (ptr), x, __gu_err); \
+ break; \
+ case 2: \
+ __get_user_asm("lhu", (ptr), x, __gu_err); \
+ break; \
+ case 4: \
+ __get_user_asm("lw", (ptr), x, __gu_err); \
+ break; \
+ case 8: { \
+ __u64 __x = 0; \
+ __gu_err = raw_copy_from_user(&__x, ptr, 8) ? \
+ -EFAULT : 0; \
+ (x) = (typeof(x))(typeof((x) - (x)))__x; \
+ break; \
+ } \
+ default: \
+ /* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
+ } \
+ __gu_err; \
+})
+
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ ( \
+ "1:" insn " %1, %2, r0;" \
+ " addk %0, r0, r0;" \
+ "2: " \
+ __FIXUP_SECTION \
+ "3: brid 2b;" \
+ " addik %0, r0, %3;" \
+ ".previous;" \
+ __EX_TABLE_SECTION \
+ ".word 1b,3b;" \
+ ".previous;" \
+ : "=&r"(__gu_err) \
+ : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ (" lwi %0, %1, 0;" \
+ "1: swi %0, %2, 0;" \
+ " lwi %0, %1, 4;" \
+ "2: swi %0, %2, 4;" \
+ " addk %0, r0, r0;" \
+ "3: " \
+ __FIXUP_SECTION \
+ "4: brid 3b;" \
+ " addik %0, r0, %3;" \
+ ".previous;" \
+ __EX_TABLE_SECTION \
+ ".word 1b,4b,2b,4b;" \
+ ".previous;" \
+ : "=&r"(__gu_err) \
+ : "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep if pagefaults are
+ * enabled.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr) \
+ __put_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __put_user_check(x, ptr, size) \
+({ \
+ typeof(*(ptr)) volatile __pu_val = x; \
+ typeof(*(ptr)) __user *__pu_addr = (ptr); \
+ int __pu_err = 0; \
+ \
+ if (access_ok(__pu_addr, size)) { \
+ switch (size) { \
+ case 1: \
+ __put_user_asm("sb", __pu_addr, __pu_val, \
+ __pu_err); \
+ break; \
+ case 2: \
+ __put_user_asm("sh", __pu_addr, __pu_val, \
+ __pu_err); \
+ break; \
+ case 4: \
+ __put_user_asm("sw", __pu_addr, __pu_val, \
+ __pu_err); \
+ break; \
+ case 8: \
+ __put_user_asm_8(__pu_addr, __pu_val, __pu_err);\
+ break; \
+ default: \
+ __pu_err = __user_bad(); \
+ break; \
+ } \
+ } else { \
+ __pu_err = -EFAULT; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user(x, ptr) \
+({ \
+ __typeof__(*(ptr)) volatile __gu_val = (x); \
+ long __gu_err = 0; \
+ switch (sizeof(__gu_val)) { \
+ case 1: \
+ __put_user_asm("sb", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 2: \
+ __put_user_asm("sh", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 4: \
+ __put_user_asm("sw", (ptr), __gu_val, __gu_err); \
+ break; \
+ case 8: \
+ __put_user_asm_8((ptr), __gu_val, __gu_err); \
+ break; \
+ default: \
+ /*__gu_err = -EINVAL;*/ __gu_err = __user_bad(); \
+ } \
+ __gu_err; \
+})
+
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ return __copy_tofrom_user(to, (__force const void __user *)from, n);
+}
+#define INLINE_COPY_FROM_USER
+#define INLINE_COPY_TO_USER
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+__must_check long strncpy_from_user(char *dst, const char __user *src,
+ long count);
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+__must_check long strnlen_user(const char __user *sstr, long len);
+
+#endif /* _ASM_MICROBLAZE_UACCESS_H */
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
new file mode 100644
index 0000000000..cfe3f888b4
--- /dev/null
+++ b/arch/microblaze/include/asm/unistd.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_UNISTD_H
+#define _ASM_MICROBLAZE_UNISTD_H
+
+#include <uapi/asm/unistd.h>
+
+#ifndef __ASSEMBLY__
+
+/* #define __ARCH_WANT_OLD_READDIR */
+/* #define __ARCH_WANT_OLD_STAT */
+#define __ARCH_WANT_NEW_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME32
+#define __ARCH_WANT_SYS_UTIME32
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/include/asm/unwind.h b/arch/microblaze/include/asm/unwind.h
new file mode 100644
index 0000000000..3db81777a8
--- /dev/null
+++ b/arch/microblaze/include/asm/unwind.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Backtrace support for Microblaze
+ *
+ * Copyright (C) 2010 Digital Design Corporation
+ */
+
+#ifndef __MICROBLAZE_UNWIND_H
+#define __MICROBLAZE_UNWIND_H
+
+struct stack_trace;
+
+struct trap_handler_info {
+ unsigned long start_addr;
+ unsigned long end_addr;
+ const char *trap_name;
+};
+extern struct trap_handler_info microblaze_trap_handlers;
+
+extern const char _hw_exception_handler;
+extern const char ex_handler_unhandled;
+
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace,
+ const char *loglvl);
+
+#endif /* __MICROBLAZE_UNWIND_H */
+
diff --git a/arch/microblaze/include/asm/vmalloc.h b/arch/microblaze/include/asm/vmalloc.h
new file mode 100644
index 0000000000..04013a42b0
--- /dev/null
+++ b/arch/microblaze/include/asm/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_MICROBLAZE_VMALLOC_H
+#define _ASM_MICROBLAZE_VMALLOC_H
+
+#endif /* _ASM_MICROBLAZE_VMALLOC_H */
diff --git a/arch/microblaze/include/asm/xilinx_mb_manager.h b/arch/microblaze/include/asm/xilinx_mb_manager.h
new file mode 100644
index 0000000000..7b6995722b
--- /dev/null
+++ b/arch/microblaze/include/asm/xilinx_mb_manager.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 Xilinx, Inc.
+ */
+#ifndef _XILINX_MB_MANAGER_H
+#define _XILINX_MB_MANAGER_H
+
+# ifndef __ASSEMBLY__
+
+#include <linux/of_address.h>
+
+/*
+ * When the break vector gets asserted because of error injection, the break
+ * signal must be blocked before exiting from the break handler, Below api
+ * updates the manager address and control register and error counter callback
+ * arguments, which will be used by the break handler to block the break and
+ * call the callback function.
+ */
+void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
+ void (*callback)(void *data),
+ void *priv, void (*reset_callback)(void *data));
+asmlinkage void xmb_inject_err(void);
+
+# endif /* __ASSEMBLY__ */
+
+/* Error injection offset */
+#define XMB_INJECT_ERR_OFFSET 0x200
+
+#endif /* _XILINX_MB_MANAGER_H */
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
new file mode 100644
index 0000000000..da95c5a030
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+generated-y += unistd_32.h
+generic-y += ucontext.h
diff --git a/arch/microblaze/include/uapi/asm/auxvec.h b/arch/microblaze/include/uapi/asm/auxvec.h
new file mode 100644
index 0000000000..93dd07bd0a
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/auxvec.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
diff --git a/arch/microblaze/include/uapi/asm/byteorder.h b/arch/microblaze/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000000..7636601694
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/byteorder.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_MICROBLAZE_BYTEORDER_H
+#define _ASM_MICROBLAZE_BYTEORDER_H
+
+#ifdef __MICROBLAZEEL__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* _ASM_MICROBLAZE_BYTEORDER_H */
diff --git a/arch/microblaze/include/uapi/asm/elf.h b/arch/microblaze/include/uapi/asm/elf.h
new file mode 100644
index 0000000000..6b656de29f
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/elf.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_ELF_H
+#define _UAPI_ASM_MICROBLAZE_ELF_H
+
+#include <linux/elf-em.h>
+
+/*
+ * Note there is no "official" ELF designation for Microblaze.
+ * I've snaffled the value from the microblaze binutils source code
+ * /binutils/microblaze/include/elf/microblaze.h
+ */
+#define EM_MICROBLAZE_OLD 0xbaab
+#define ELF_ARCH EM_MICROBLAZE
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_MICROBLAZE \
+ || (x)->e_machine == EM_MICROBLAZE_OLD)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+
+#ifndef __uClinux__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/byteorder.h>
+
+#ifndef ELF_GREG_T
+#define ELF_GREG_T
+typedef unsigned long elf_greg_t;
+#endif
+
+#ifndef ELF_NGREG
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+#endif
+
+#ifndef ELF_GREGSET_T
+#define ELF_GREGSET_T
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#endif
+
+#ifndef ELF_FPREGSET_T
+#define ELF_FPREGSET_T
+
+/* TBD */
+#define ELF_NFPREG 33 /* includes fsr */
+typedef unsigned long elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* typedef struct user_fpu_struct elf_fpregset_t; */
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+#ifdef __MICROBLAZEEL__
+#define ELF_DATA ELFDATA2LSB
+#else
+#define ELF_DATA ELFDATA2MSB
+#endif
+
+#define ELF_EXEC_PAGESIZE PAGE_SIZE
+
+
+#define ELF_CORE_COPY_REGS(_dest, _regs) \
+ memcpy((char *) &_dest, (char *) _regs, \
+ sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports. This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM (NULL)
+
+/* Added _f parameter. Is this definition correct: TBD */
+#define ELF_PLAT_INIT(_r, _f) \
+do { \
+ _r->r0 = _r->r1 = _r->r2 = _r->r3 = \
+ _r->r4 = _r->r5 = _r->r6 = _r->r7 = \
+ _r->r8 = _r->r9 = _r->r10 = _r->r11 = \
+ _r->r12 = _r->r13 = _r->r14 = _r->r15 = \
+ _r->r16 = _r->r17 = _r->r18 = _r->r19 = \
+ _r->r20 = _r->r21 = _r->r22 = _r->r23 = \
+ _r->r24 = _r->r25 = _r->r26 = _r->r27 = \
+ _r->r28 = _r->r29 = _r->r30 = _r->r31 = \
+ 0; \
+} while (0)
+
+
+#endif /* __uClinux__ */
+
+#endif /* _UAPI_ASM_MICROBLAZE_ELF_H */
diff --git a/arch/microblaze/include/uapi/asm/posix_types.h b/arch/microblaze/include/uapi/asm/posix_types.h
new file mode 100644
index 0000000000..f3249da691
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/posix_types.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
+#define _ASM_MICROBLAZE_POSIX_TYPES_H
+
+typedef unsigned short __kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/uapi/asm/ptrace.h b/arch/microblaze/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000000..46dd94cb78
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/ptrace.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_PTRACE_H
+#define _UAPI_ASM_MICROBLAZE_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long microblaze_reg_t;
+
+struct pt_regs {
+ microblaze_reg_t r0;
+ microblaze_reg_t r1;
+ microblaze_reg_t r2;
+ microblaze_reg_t r3;
+ microblaze_reg_t r4;
+ microblaze_reg_t r5;
+ microblaze_reg_t r6;
+ microblaze_reg_t r7;
+ microblaze_reg_t r8;
+ microblaze_reg_t r9;
+ microblaze_reg_t r10;
+ microblaze_reg_t r11;
+ microblaze_reg_t r12;
+ microblaze_reg_t r13;
+ microblaze_reg_t r14;
+ microblaze_reg_t r15;
+ microblaze_reg_t r16;
+ microblaze_reg_t r17;
+ microblaze_reg_t r18;
+ microblaze_reg_t r19;
+ microblaze_reg_t r20;
+ microblaze_reg_t r21;
+ microblaze_reg_t r22;
+ microblaze_reg_t r23;
+ microblaze_reg_t r24;
+ microblaze_reg_t r25;
+ microblaze_reg_t r26;
+ microblaze_reg_t r27;
+ microblaze_reg_t r28;
+ microblaze_reg_t r29;
+ microblaze_reg_t r30;
+ microblaze_reg_t r31;
+ microblaze_reg_t pc;
+ microblaze_reg_t msr;
+ microblaze_reg_t ear;
+ microblaze_reg_t esr;
+ microblaze_reg_t fsr;
+ int pt_mode;
+};
+
+#ifndef __KERNEL__
+
+/* pt_regs offsets used by gdbserver etc in ptrace syscalls */
+#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t))
+#define PT_PC (32 * sizeof(microblaze_reg_t))
+#define PT_MSR (33 * sizeof(microblaze_reg_t))
+#define PT_EAR (34 * sizeof(microblaze_reg_t))
+#define PT_ESR (35 * sizeof(microblaze_reg_t))
+#define PT_FSR (36 * sizeof(microblaze_reg_t))
+#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t))
+
+#endif /* __KERNEL */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/uapi/asm/setup.h b/arch/microblaze/include/uapi/asm/setup.h
new file mode 100644
index 0000000000..6831794e6f
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/setup.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_SETUP_H
+#define _UAPI_ASM_MICROBLAZE_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+# ifndef __ASSEMBLY__
+
+# endif /* __ASSEMBLY__ */
+#endif /* _UAPI_ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/uapi/asm/sigcontext.h b/arch/microblaze/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000000..47eb2e2111
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/sigcontext.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGCONTEXT_H
+#define _ASM_MICROBLAZE_SIGCONTEXT_H
+
+/* FIXME should be linux/ptrace.h */
+#include <asm/ptrace.h>
+
+struct sigcontext {
+ struct pt_regs regs;
+ unsigned long oldmask;
+};
+
+#endif /* _ASM_MICROBLAZE_SIGCONTEXT_H */
diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h
new file mode 100644
index 0000000000..3f2d7cb683
--- /dev/null
+++ b/arch/microblaze/include/uapi/asm/unistd.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_UNISTD_H
+#define _UAPI_ASM_MICROBLAZE_UNISTD_H
+
+#include <asm/unistd_32.h>
+
+#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/kernel/.gitignore b/arch/microblaze/kernel/.gitignore
new file mode 100644
index 0000000000..bbb90f92d0
--- /dev/null
+++ b/arch/microblaze/kernel/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
new file mode 100644
index 0000000000..4393bee64e
--- /dev/null
+++ b/arch/microblaze/kernel/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile
+#
+
+ifdef CONFIG_FUNCTION_TRACER
+# Do not trace early boot code and low level code
+CFLAGS_REMOVE_timer.o = -pg
+CFLAGS_REMOVE_intc.o = -pg
+CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_process.o = -pg
+endif
+
+extra-y := vmlinux.lds
+
+obj-y += head.o dma.o exceptions.o \
+ hw_exception_handler.o irq.o \
+ process.o prom.o ptrace.o \
+ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
+
+obj-y += cpu/
+
+obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
+obj-y += misc.o
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
+obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o mcount.o
+obj-$(CONFIG_KGDB) += kgdb.o
+
+obj-y += entry.o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
new file mode 100644
index 0000000000..104c3ac5f3
--- /dev/null
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
+
+int main(int argc, char *argv[])
+{
+ /* struct pt_regs */
+ DEFINE(PT_SIZE, sizeof(struct pt_regs));
+ DEFINE(PT_MSR, offsetof(struct pt_regs, msr));
+ DEFINE(PT_EAR, offsetof(struct pt_regs, ear));
+ DEFINE(PT_ESR, offsetof(struct pt_regs, esr));
+ DEFINE(PT_FSR, offsetof(struct pt_regs, fsr));
+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+ DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+ DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+ DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+ DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+ DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+ DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+ DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+ DEFINE(PT_R8, offsetof(struct pt_regs, r8));
+ DEFINE(PT_R9, offsetof(struct pt_regs, r9));
+ DEFINE(PT_R10, offsetof(struct pt_regs, r10));
+ DEFINE(PT_R11, offsetof(struct pt_regs, r11));
+ DEFINE(PT_R12, offsetof(struct pt_regs, r12));
+ DEFINE(PT_R13, offsetof(struct pt_regs, r13));
+ DEFINE(PT_R14, offsetof(struct pt_regs, r14));
+ DEFINE(PT_R15, offsetof(struct pt_regs, r15));
+ DEFINE(PT_R16, offsetof(struct pt_regs, r16));
+ DEFINE(PT_R17, offsetof(struct pt_regs, r17));
+ DEFINE(PT_R18, offsetof(struct pt_regs, r18));
+ DEFINE(PT_R19, offsetof(struct pt_regs, r19));
+ DEFINE(PT_R20, offsetof(struct pt_regs, r20));
+ DEFINE(PT_R21, offsetof(struct pt_regs, r21));
+ DEFINE(PT_R22, offsetof(struct pt_regs, r22));
+ DEFINE(PT_R23, offsetof(struct pt_regs, r23));
+ DEFINE(PT_R24, offsetof(struct pt_regs, r24));
+ DEFINE(PT_R25, offsetof(struct pt_regs, r25));
+ DEFINE(PT_R26, offsetof(struct pt_regs, r26));
+ DEFINE(PT_R27, offsetof(struct pt_regs, r27));
+ DEFINE(PT_R28, offsetof(struct pt_regs, r28));
+ DEFINE(PT_R29, offsetof(struct pt_regs, r29));
+ DEFINE(PT_R30, offsetof(struct pt_regs, r30));
+ DEFINE(PT_R31, offsetof(struct pt_regs, r31));
+ DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
+ BLANK();
+
+ /* Magic offsets for PTRACE PEEK/POKE etc */
+ DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs) + 1);
+ DEFINE(PT_TEXT_LEN, sizeof(struct pt_regs) + 2);
+ DEFINE(PT_DATA_ADDR, sizeof(struct pt_regs) + 3);
+ BLANK();
+
+ /* struct task_struct */
+ DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+ DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+ BLANK();
+
+ DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+ BLANK();
+
+ /* struct thread_info */
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+ DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count));
+ BLANK();
+
+ /* struct cpu_context */
+ DEFINE(CC_R1, offsetof(struct cpu_context, r1)); /* r1 */
+ DEFINE(CC_R2, offsetof(struct cpu_context, r2));
+ /* dedicated registers */
+ DEFINE(CC_R13, offsetof(struct cpu_context, r13));
+ DEFINE(CC_R14, offsetof(struct cpu_context, r14));
+ DEFINE(CC_R15, offsetof(struct cpu_context, r15));
+ DEFINE(CC_R16, offsetof(struct cpu_context, r16));
+ DEFINE(CC_R17, offsetof(struct cpu_context, r17));
+ DEFINE(CC_R18, offsetof(struct cpu_context, r18));
+ /* non-volatile registers */
+ DEFINE(CC_R19, offsetof(struct cpu_context, r19));
+ DEFINE(CC_R20, offsetof(struct cpu_context, r20));
+ DEFINE(CC_R21, offsetof(struct cpu_context, r21));
+ DEFINE(CC_R22, offsetof(struct cpu_context, r22));
+ DEFINE(CC_R23, offsetof(struct cpu_context, r23));
+ DEFINE(CC_R24, offsetof(struct cpu_context, r24));
+ DEFINE(CC_R25, offsetof(struct cpu_context, r25));
+ DEFINE(CC_R26, offsetof(struct cpu_context, r26));
+ DEFINE(CC_R27, offsetof(struct cpu_context, r27));
+ DEFINE(CC_R28, offsetof(struct cpu_context, r28));
+ DEFINE(CC_R29, offsetof(struct cpu_context, r29));
+ DEFINE(CC_R30, offsetof(struct cpu_context, r30));
+ /* special purpose registers */
+ DEFINE(CC_MSR, offsetof(struct cpu_context, msr));
+ DEFINE(CC_EAR, offsetof(struct cpu_context, ear));
+ DEFINE(CC_ESR, offsetof(struct cpu_context, esr));
+ DEFINE(CC_FSR, offsetof(struct cpu_context, fsr));
+ BLANK();
+
+ /* struct cpuinfo */
+ DEFINE(CI_DCS, offsetof(struct cpuinfo, dcache_size));
+ DEFINE(CI_DCL, offsetof(struct cpuinfo, dcache_line_length));
+ DEFINE(CI_ICS, offsetof(struct cpuinfo, icache_size));
+ DEFINE(CI_ICL, offsetof(struct cpuinfo, icache_line_length));
+ BLANK();
+
+ return 0;
+}
diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile
new file mode 100644
index 0000000000..059afc75a9
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Build the appropriate CPU version support
+#
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_cache.o = -pg
+endif
+
+ccflags-y := -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
+ -DCPU_REV=$(CPU_REV)
+
+obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
new file mode 100644
index 0000000000..dcba53803f
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -0,0 +1,656 @@
+/*
+ * Cache control for MicroBlaze cache memories
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007-2009 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/cache.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+static inline void __enable_icache_msr(void)
+{
+ __asm__ __volatile__ (" msrset r0, %0;" \
+ "nop;" \
+ : : "i" (MSR_ICE) : "memory");
+}
+
+static inline void __disable_icache_msr(void)
+{
+ __asm__ __volatile__ (" msrclr r0, %0;" \
+ "nop;" \
+ : : "i" (MSR_ICE) : "memory");
+}
+
+static inline void __enable_dcache_msr(void)
+{
+ __asm__ __volatile__ (" msrset r0, %0;" \
+ "nop;" \
+ : : "i" (MSR_DCE) : "memory");
+}
+
+static inline void __disable_dcache_msr(void)
+{
+ __asm__ __volatile__ (" msrclr r0, %0;" \
+ "nop; " \
+ : : "i" (MSR_DCE) : "memory");
+}
+
+static inline void __enable_icache_nomsr(void)
+{
+ __asm__ __volatile__ (" mfs r12, rmsr;" \
+ "nop;" \
+ "ori r12, r12, %0;" \
+ "mts rmsr, r12;" \
+ "nop;" \
+ : : "i" (MSR_ICE) : "memory", "r12");
+}
+
+static inline void __disable_icache_nomsr(void)
+{
+ __asm__ __volatile__ (" mfs r12, rmsr;" \
+ "nop;" \
+ "andi r12, r12, ~%0;" \
+ "mts rmsr, r12;" \
+ "nop;" \
+ : : "i" (MSR_ICE) : "memory", "r12");
+}
+
+static inline void __enable_dcache_nomsr(void)
+{
+ __asm__ __volatile__ (" mfs r12, rmsr;" \
+ "nop;" \
+ "ori r12, r12, %0;" \
+ "mts rmsr, r12;" \
+ "nop;" \
+ : : "i" (MSR_DCE) : "memory", "r12");
+}
+
+static inline void __disable_dcache_nomsr(void)
+{
+ __asm__ __volatile__ (" mfs r12, rmsr;" \
+ "nop;" \
+ "andi r12, r12, ~%0;" \
+ "mts rmsr, r12;" \
+ "nop;" \
+ : : "i" (MSR_DCE) : "memory", "r12");
+}
+
+
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
+#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \
+do { \
+ int align = ~(cache_line_length - 1); \
+ if (start < UINT_MAX - cache_size) \
+ end = min(start + cache_size, end); \
+ start &= align; \
+} while (0)
+
+/*
+ * Helper macro to loop over the specified cache_size/line_length and
+ * execute 'op' on that cacheline
+ */
+#define CACHE_ALL_LOOP(cache_size, line_length, op) \
+do { \
+ unsigned int len = cache_size - line_length; \
+ int step = -line_length; \
+ WARN_ON(step >= 0); \
+ \
+ __asm__ __volatile__ (" 1: " #op " %0, r0;" \
+ "bgtid %0, 1b;" \
+ "addk %0, %0, %1;" \
+ : : "r" (len), "r" (step) \
+ : "memory"); \
+} while (0)
+
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to subtract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
+#define CACHE_RANGE_LOOP_2(start, end, line_length, op) \
+do { \
+ int step = -line_length; \
+ int align = ~(line_length - 1); \
+ int count; \
+ end = ((end & align) == end) ? end - line_length : end & align; \
+ count = end - start; \
+ WARN_ON(count < 0); \
+ \
+ __asm__ __volatile__ (" 1: " #op " %0, %1;" \
+ "bgtid %1, 1b;" \
+ "addk %1, %1, %2;" \
+ : : "r" (start), "r" (count), \
+ "r" (step) : "memory"); \
+} while (0)
+
+/* It is used only first parameter for OP - for wic, wdc */
+#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
+do { \
+ unsigned int volatile temp = 0; \
+ unsigned int align = ~(line_length - 1); \
+ end = ((end & align) == end) ? end - line_length : end & align; \
+ WARN_ON(end < start); \
+ \
+ __asm__ __volatile__ (" 1: " #op " %1, r0;" \
+ "cmpu %0, %1, %2;" \
+ "bgtid %0, 1b;" \
+ "addk %1, %1, %3;" \
+ : : "r" (temp), "r" (start), "r" (end), \
+ "r" (line_length) : "memory"); \
+} while (0)
+
+#define ASM_LOOP
+
+static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.icache_line_length, cpuinfo.icache_size);
+
+ local_irq_save(flags);
+ __disable_icache_msr();
+
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+ for (i = start; i < end; i += cpuinfo.icache_line_length)
+ __asm__ __volatile__ ("wic %0, r0;" \
+ : : "r" (i));
+#endif
+ __enable_icache_msr();
+ local_irq_restore(flags);
+}
+
+static void __flush_icache_range_nomsr_irq(unsigned long start,
+ unsigned long end)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.icache_line_length, cpuinfo.icache_size);
+
+ local_irq_save(flags);
+ __disable_icache_nomsr();
+
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+ for (i = start; i < end; i += cpuinfo.icache_line_length)
+ __asm__ __volatile__ ("wic %0, r0;" \
+ : : "r" (i));
+#endif
+
+ __enable_icache_nomsr();
+ local_irq_restore(flags);
+}
+
+static void __flush_icache_range_noirq(unsigned long start,
+ unsigned long end)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.icache_line_length, cpuinfo.icache_size);
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+ for (i = start; i < end; i += cpuinfo.icache_line_length)
+ __asm__ __volatile__ ("wic %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+static void __flush_icache_all_msr_irq(void)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+
+ local_irq_save(flags);
+ __disable_icache_msr();
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+ for (i = 0; i < cpuinfo.icache_size;
+ i += cpuinfo.icache_line_length)
+ __asm__ __volatile__ ("wic %0, r0;" \
+ : : "r" (i));
+#endif
+ __enable_icache_msr();
+ local_irq_restore(flags);
+}
+
+static void __flush_icache_all_nomsr_irq(void)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+
+ local_irq_save(flags);
+ __disable_icache_nomsr();
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+ for (i = 0; i < cpuinfo.icache_size;
+ i += cpuinfo.icache_line_length)
+ __asm__ __volatile__ ("wic %0, r0;" \
+ : : "r" (i));
+#endif
+ __enable_icache_nomsr();
+ local_irq_restore(flags);
+}
+
+static void __flush_icache_all_noirq(void)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+ for (i = 0; i < cpuinfo.icache_size;
+ i += cpuinfo.icache_line_length)
+ __asm__ __volatile__ ("wic %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_all_msr_irq(void)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+
+ local_irq_save(flags);
+ __disable_dcache_msr();
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+#else
+ for (i = 0; i < cpuinfo.dcache_size;
+ i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+ __enable_dcache_msr();
+ local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_all_nomsr_irq(void)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+
+ local_irq_save(flags);
+ __disable_dcache_nomsr();
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+#else
+ for (i = 0; i < cpuinfo.dcache_size;
+ i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+ __enable_dcache_nomsr();
+ local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_all_noirq_wt(void)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+#else
+ for (i = 0; i < cpuinfo.dcache_size;
+ i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+/*
+ * FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
+static void __invalidate_dcache_all_wb(void)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+ wdc);
+#else
+ for (i = 0; i < cpuinfo.dcache_size;
+ i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_range_wb(unsigned long start,
+ unsigned long end)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
+#else
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc.clear %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
+ unsigned long end)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
+ unsigned long end)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+ local_irq_save(flags);
+ __disable_dcache_msr();
+
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+
+ __enable_dcache_msr();
+ local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
+ unsigned long end)
+{
+ unsigned long flags;
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+ local_irq_save(flags);
+ __disable_dcache_nomsr();
+
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc %0, r0;" \
+ : : "r" (i));
+#endif
+
+ __enable_dcache_nomsr();
+ local_irq_restore(flags);
+}
+
+static void __flush_dcache_all_wb(void)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+ wdc.flush);
+#else
+ for (i = 0; i < cpuinfo.dcache_size;
+ i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc.flush %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
+{
+#ifndef ASM_LOOP
+ int i;
+#endif
+ pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+ (unsigned int)start, (unsigned int) end);
+
+ CACHE_LOOP_LIMITS(start, end,
+ cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
+ CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
+#else
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
+ __asm__ __volatile__ ("wdc.flush %0, r0;" \
+ : : "r" (i));
+#endif
+}
+
+/* struct for wb caches and for wt caches */
+struct scache *mbc;
+
+/* new wb cache model */
+static const struct scache wb_msr = {
+ .ie = __enable_icache_msr,
+ .id = __disable_icache_msr,
+ .ifl = __flush_icache_all_noirq,
+ .iflr = __flush_icache_range_noirq,
+ .iin = __flush_icache_all_noirq,
+ .iinr = __flush_icache_range_noirq,
+ .de = __enable_dcache_msr,
+ .dd = __disable_dcache_msr,
+ .dfl = __flush_dcache_all_wb,
+ .dflr = __flush_dcache_range_wb,
+ .din = __invalidate_dcache_all_wb,
+ .dinr = __invalidate_dcache_range_wb,
+};
+
+/* There is only difference in ie, id, de, dd functions */
+static const struct scache wb_nomsr = {
+ .ie = __enable_icache_nomsr,
+ .id = __disable_icache_nomsr,
+ .ifl = __flush_icache_all_noirq,
+ .iflr = __flush_icache_range_noirq,
+ .iin = __flush_icache_all_noirq,
+ .iinr = __flush_icache_range_noirq,
+ .de = __enable_dcache_nomsr,
+ .dd = __disable_dcache_nomsr,
+ .dfl = __flush_dcache_all_wb,
+ .dflr = __flush_dcache_range_wb,
+ .din = __invalidate_dcache_all_wb,
+ .dinr = __invalidate_dcache_range_wb,
+};
+
+/* Old wt cache model with disabling irq and turn off cache */
+static const struct scache wt_msr = {
+ .ie = __enable_icache_msr,
+ .id = __disable_icache_msr,
+ .ifl = __flush_icache_all_msr_irq,
+ .iflr = __flush_icache_range_msr_irq,
+ .iin = __flush_icache_all_msr_irq,
+ .iinr = __flush_icache_range_msr_irq,
+ .de = __enable_dcache_msr,
+ .dd = __disable_dcache_msr,
+ .dfl = __invalidate_dcache_all_msr_irq,
+ .dflr = __invalidate_dcache_range_msr_irq_wt,
+ .din = __invalidate_dcache_all_msr_irq,
+ .dinr = __invalidate_dcache_range_msr_irq_wt,
+};
+
+static const struct scache wt_nomsr = {
+ .ie = __enable_icache_nomsr,
+ .id = __disable_icache_nomsr,
+ .ifl = __flush_icache_all_nomsr_irq,
+ .iflr = __flush_icache_range_nomsr_irq,
+ .iin = __flush_icache_all_nomsr_irq,
+ .iinr = __flush_icache_range_nomsr_irq,
+ .de = __enable_dcache_nomsr,
+ .dd = __disable_dcache_nomsr,
+ .dfl = __invalidate_dcache_all_nomsr_irq,
+ .dflr = __invalidate_dcache_range_nomsr_irq,
+ .din = __invalidate_dcache_all_nomsr_irq,
+ .dinr = __invalidate_dcache_range_nomsr_irq,
+};
+
+/* New wt cache model for newer Microblaze versions */
+static const struct scache wt_msr_noirq = {
+ .ie = __enable_icache_msr,
+ .id = __disable_icache_msr,
+ .ifl = __flush_icache_all_noirq,
+ .iflr = __flush_icache_range_noirq,
+ .iin = __flush_icache_all_noirq,
+ .iinr = __flush_icache_range_noirq,
+ .de = __enable_dcache_msr,
+ .dd = __disable_dcache_msr,
+ .dfl = __invalidate_dcache_all_noirq_wt,
+ .dflr = __invalidate_dcache_range_nomsr_wt,
+ .din = __invalidate_dcache_all_noirq_wt,
+ .dinr = __invalidate_dcache_range_nomsr_wt,
+};
+
+static const struct scache wt_nomsr_noirq = {
+ .ie = __enable_icache_nomsr,
+ .id = __disable_icache_nomsr,
+ .ifl = __flush_icache_all_noirq,
+ .iflr = __flush_icache_range_noirq,
+ .iin = __flush_icache_all_noirq,
+ .iinr = __flush_icache_range_noirq,
+ .de = __enable_dcache_nomsr,
+ .dd = __disable_dcache_nomsr,
+ .dfl = __invalidate_dcache_all_noirq_wt,
+ .dflr = __invalidate_dcache_range_nomsr_wt,
+ .din = __invalidate_dcache_all_noirq_wt,
+ .dinr = __invalidate_dcache_range_nomsr_wt,
+};
+
+/* CPU version code for 7.20.c - see arch/microblaze/kernel/cpu/cpuinfo.c */
+#define CPUVER_7_20_A 0x0c
+#define CPUVER_7_20_D 0x0f
+
+void microblaze_cache_init(void)
+{
+ if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) {
+ if (cpuinfo.dcache_wb) {
+ pr_info("wb_msr\n");
+ mbc = (struct scache *)&wb_msr;
+ if (cpuinfo.ver_code <= CPUVER_7_20_D) {
+ /* MS: problem with signal handling - hw bug */
+ pr_info("WB won't work properly\n");
+ }
+ } else {
+ if (cpuinfo.ver_code >= CPUVER_7_20_A) {
+ pr_info("wt_msr_noirq\n");
+ mbc = (struct scache *)&wt_msr_noirq;
+ } else {
+ pr_info("wt_msr\n");
+ mbc = (struct scache *)&wt_msr;
+ }
+ }
+ } else {
+ if (cpuinfo.dcache_wb) {
+ pr_info("wb_nomsr\n");
+ mbc = (struct scache *)&wb_nomsr;
+ if (cpuinfo.ver_code <= CPUVER_7_20_D) {
+ /* MS: problem with signal handling - hw bug */
+ pr_info("WB won't work properly\n");
+ }
+ } else {
+ if (cpuinfo.ver_code >= CPUVER_7_20_A) {
+ pr_info("wt_nomsr_noirq\n");
+ mbc = (struct scache *)&wt_nomsr_noirq;
+ } else {
+ pr_info("wt_nomsr\n");
+ mbc = (struct scache *)&wt_nomsr;
+ }
+ }
+ }
+ /*
+ * FIXME Invalidation is done in U-BOOT
+ * WT cache: Data is already written to main memory
+ * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+ */
+ /* invalidate_dcache(); */
+ enable_dcache();
+
+ invalidate_icache();
+ enable_icache();
+}
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
new file mode 100644
index 0000000000..c7ee51b090
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -0,0 +1,110 @@
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/pvr.h>
+#include <asm/cpuinfo.h>
+
+/*
+ * Helper macro to map between fields in our struct cpuinfo, and
+ * the PVR macros in pvr.h.
+ */
+
+#define CI(c, p) { ci->c = PVR_##p(pvr); }
+
+#define err_printk(x) \
+ pr_err("ERROR: Microblaze " x "-different for PVR and DTS\n");
+
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
+{
+ struct pvr_s pvr;
+ u32 temp; /* for saving temp value */
+ get_pvr(&pvr);
+
+ CI(ver_code, VERSION);
+ if (!ci->ver_code) {
+ pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n");
+ return;
+ }
+
+ temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |
+ PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
+ if (ci->use_instr != temp)
+ err_printk("BARREL, MSR, PCMP or DIV");
+ ci->use_instr = temp;
+
+ temp = PVR_USE_HW_MUL(pvr) | PVR_USE_MUL64(pvr);
+ if (ci->use_mult != temp)
+ err_printk("HW_MUL");
+ ci->use_mult = temp;
+
+ temp = PVR_USE_FPU(pvr) | PVR_USE_FPU2(pvr);
+ if (ci->use_fpu != temp)
+ err_printk("HW_FPU");
+ ci->use_fpu = temp;
+
+ ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |
+ PVR_UNALIGNED_EXCEPTION(pvr) |
+ PVR_ILL_OPCODE_EXCEPTION(pvr) |
+ PVR_IOPB_BUS_EXCEPTION(pvr) |
+ PVR_DOPB_BUS_EXCEPTION(pvr) |
+ PVR_DIV_ZERO_EXCEPTION(pvr) |
+ PVR_FPU_EXCEPTION(pvr) |
+ PVR_FSL_EXCEPTION(pvr);
+
+ CI(pvr_user1, USER1);
+ CI(pvr_user2, USER2);
+
+ CI(mmu, USE_MMU);
+ CI(mmu_privins, MMU_PRIVINS);
+ CI(endian, ENDIAN);
+
+ CI(use_icache, USE_ICACHE);
+ CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
+ CI(icache_write, ICACHE_ALLOW_WR);
+ ci->icache_line_length = PVR_ICACHE_LINE_LEN(pvr) << 2;
+ CI(icache_size, ICACHE_BYTE_SIZE);
+ CI(icache_base, ICACHE_BASEADDR);
+ CI(icache_high, ICACHE_HIGHADDR);
+
+ CI(use_dcache, USE_DCACHE);
+ CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS);
+ CI(dcache_write, DCACHE_ALLOW_WR);
+ ci->dcache_line_length = PVR_DCACHE_LINE_LEN(pvr) << 2;
+ CI(dcache_size, DCACHE_BYTE_SIZE);
+ CI(dcache_base, DCACHE_BASEADDR);
+ CI(dcache_high, DCACHE_HIGHADDR);
+
+ temp = PVR_DCACHE_USE_WRITEBACK(pvr);
+ if (ci->dcache_wb != temp)
+ err_printk("DCACHE WB");
+ ci->dcache_wb = temp;
+
+ CI(use_dopb, D_OPB);
+ CI(use_iopb, I_OPB);
+ CI(use_dlmb, D_LMB);
+ CI(use_ilmb, I_LMB);
+ CI(num_fsl, FSL_LINKS);
+
+ CI(irq_edge, INTERRUPT_IS_EDGE);
+ CI(irq_positive, EDGE_IS_POSITIVE);
+
+ CI(area_optimised, AREA_OPTIMISED);
+
+ CI(hw_debug, DEBUG_ENABLED);
+ CI(num_pc_brk, NUMBER_OF_PC_BRK);
+ CI(num_rd_brk, NUMBER_OF_RD_ADDR_BRK);
+ CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK);
+
+ CI(fpga_family_code, TARGET_FAMILY);
+}
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
new file mode 100644
index 0000000000..85dbda4a08
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+
+#define err_printk(x) \
+ early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
+
+void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
+{
+ u32 i = 0;
+
+ ci->use_instr =
+ (fcpu(cpu, "xlnx,use-barrel") ? PVR0_USE_BARREL_MASK : 0) |
+ (fcpu(cpu, "xlnx,use-msr-instr") ? PVR2_USE_MSR_INSTR : 0) |
+ (fcpu(cpu, "xlnx,use-pcmp-instr") ? PVR2_USE_PCMP_INSTR : 0) |
+ (fcpu(cpu, "xlnx,use-div") ? PVR0_USE_DIV_MASK : 0);
+ if (CONFIG_XILINX_MICROBLAZE0_USE_BARREL)
+ i |= PVR0_USE_BARREL_MASK;
+ if (CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR)
+ i |= PVR2_USE_MSR_INSTR;
+ if (CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR)
+ i |= PVR2_USE_PCMP_INSTR;
+ if (CONFIG_XILINX_MICROBLAZE0_USE_DIV)
+ i |= PVR0_USE_DIV_MASK;
+ if (ci->use_instr != i)
+ err_printk("BARREL, MSR, PCMP or DIV");
+
+ ci->use_mult = fcpu(cpu, "xlnx,use-hw-mul");
+ if (ci->use_mult != CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)
+ err_printk("HW_MUL");
+ ci->use_mult =
+ (ci->use_mult > 1 ?
+ (PVR2_USE_MUL64_MASK | PVR0_USE_HW_MUL_MASK) :
+ (ci->use_mult == 1 ? PVR0_USE_HW_MUL_MASK : 0));
+
+ ci->use_fpu = fcpu(cpu, "xlnx,use-fpu");
+ if (ci->use_fpu != CONFIG_XILINX_MICROBLAZE0_USE_FPU)
+ err_printk("HW_FPU");
+ ci->use_fpu = (ci->use_fpu > 1 ?
+ (PVR2_USE_FPU2_MASK | PVR0_USE_FPU_MASK) :
+ (ci->use_fpu == 1 ? PVR0_USE_FPU_MASK : 0));
+
+ ci->use_exc =
+ (fcpu(cpu, "xlnx,unaligned-exceptions") ?
+ PVR2_UNALIGNED_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,ill-opcode-exception") ?
+ PVR2_ILL_OPCODE_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,iopb-bus-exception") ?
+ PVR2_IOPB_BUS_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,dopb-bus-exception") ?
+ PVR2_DOPB_BUS_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,div-zero-exception") ?
+ PVR2_DIV_ZERO_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,fpu-exception") ? PVR2_FPU_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,fsl-exception") ? PVR2_USE_EXTEND_FSL : 0);
+
+ ci->use_icache = fcpu(cpu, "xlnx,use-icache");
+ ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits");
+ ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr");
+ ci->icache_line_length = fcpu(cpu, "xlnx,icache-line-len") << 2;
+ if (!ci->icache_line_length) {
+ if (fcpu(cpu, "xlnx,icache-use-fsl"))
+ ci->icache_line_length = 4 << 2;
+ else
+ ci->icache_line_length = 1 << 2;
+ }
+ ci->icache_size = fcpu(cpu, "i-cache-size");
+ ci->icache_base = fcpu(cpu, "i-cache-baseaddr");
+ ci->icache_high = fcpu(cpu, "i-cache-highaddr");
+
+ ci->use_dcache = fcpu(cpu, "xlnx,use-dcache");
+ ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag");
+ ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr");
+ ci->dcache_line_length = fcpu(cpu, "xlnx,dcache-line-len") << 2;
+ if (!ci->dcache_line_length) {
+ if (fcpu(cpu, "xlnx,dcache-use-fsl"))
+ ci->dcache_line_length = 4 << 2;
+ else
+ ci->dcache_line_length = 1 << 2;
+ }
+ ci->dcache_size = fcpu(cpu, "d-cache-size");
+ ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
+ ci->dcache_high = fcpu(cpu, "d-cache-highaddr");
+ ci->dcache_wb = fcpu(cpu, "xlnx,dcache-use-writeback");
+
+ ci->use_dopb = fcpu(cpu, "xlnx,d-opb");
+ ci->use_iopb = fcpu(cpu, "xlnx,i-opb");
+ ci->use_dlmb = fcpu(cpu, "xlnx,d-lmb");
+ ci->use_ilmb = fcpu(cpu, "xlnx,i-lmb");
+
+ ci->num_fsl = fcpu(cpu, "xlnx,fsl-links");
+ ci->irq_edge = fcpu(cpu, "xlnx,interrupt-is-edge");
+ ci->irq_positive = fcpu(cpu, "xlnx,edge-is-positive");
+ ci->area_optimised = 0;
+
+ ci->hw_debug = fcpu(cpu, "xlnx,debug-enabled");
+ ci->num_pc_brk = fcpu(cpu, "xlnx,number-of-pc-brk");
+ ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk");
+ ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk");
+
+ ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1");
+ ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2");
+
+ ci->mmu = fcpu(cpu, "xlnx,use-mmu");
+ ci->mmu_privins = fcpu(cpu, "xlnx,mmu-privileged-instr");
+ ci->endian = fcpu(cpu, "xlnx,endianness");
+
+ ci->ver_code = 0;
+ ci->fpga_family_code = 0;
+
+ /* Do various fixups based on CPU version and FPGA family strings */
+
+ /* Resolved the CPU version code */
+ for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+ if (strcmp(cpu_ver_lookup[i].s, cpu_ver_string) == 0)
+ ci->ver_code = cpu_ver_lookup[i].k;
+ }
+
+ /* Resolved the fpga family code */
+ for (i = 0; family_string_lookup[i].s != NULL; i++) {
+ if (strcmp(family_string_lookup[i].s, family_string) == 0)
+ ci->fpga_family_code = family_string_lookup[i].k;
+ }
+
+ /* FIXME - mb3 and spartan2 do not exist in PVR */
+ /* This is mb3 and on a non Spartan2 */
+ if (ci->ver_code == 0x20 && ci->fpga_family_code != 0xf0)
+ /* Hardware Multiplier in use */
+ ci->use_mult = 1;
+}
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
new file mode 100644
index 0000000000..cd9b445076
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+const struct cpu_ver_key cpu_ver_lookup[] = {
+ /* These key value are as per MBV field in PVR0 */
+ {"5.00.a", 0x01},
+ {"5.00.b", 0x02},
+ {"5.00.c", 0x03},
+ {"6.00.a", 0x04},
+ {"6.00.b", 0x06},
+ {"7.00.a", 0x05},
+ {"7.00.b", 0x07},
+ {"7.10.a", 0x08},
+ {"7.10.b", 0x09},
+ {"7.10.c", 0x0a},
+ {"7.10.d", 0x0b},
+ {"7.20.a", 0x0c},
+ {"7.20.b", 0x0d},
+ {"7.20.c", 0x0e},
+ {"7.20.d", 0x0f},
+ {"7.30.a", 0x10},
+ {"7.30.b", 0x11},
+ {"8.00.a", 0x12},
+ {"8.00.b", 0x13},
+ {"8.10.a", 0x14},
+ {"8.20.a", 0x15},
+ {"8.20.b", 0x16},
+ {"8.30.a", 0x17},
+ {"8.40.a", 0x18},
+ {"8.40.b", 0x19},
+ {"8.50.a", 0x1a},
+ {"8.50.b", 0x1c},
+ {"8.50.c", 0x1e},
+ {"9.0", 0x1b},
+ {"9.1", 0x1d},
+ {"9.2", 0x1f},
+ {"9.3", 0x20},
+ {"9.4", 0x21},
+ {"9.5", 0x22},
+ {"9.6", 0x23},
+ {"10.0", 0x24},
+ {"11.0", 0x25},
+ {NULL, 0},
+};
+
+/*
+ * FIXME Not sure if the actual key is defined by Xilinx in the PVR
+ */
+const struct family_string_key family_string_lookup[] = {
+ {"virtex2", 0x4},
+ {"virtex2pro", 0x5},
+ {"spartan3", 0x6},
+ {"virtex4", 0x7},
+ {"virtex5", 0x8},
+ {"spartan3e", 0x9},
+ {"spartan3a", 0xa},
+ {"spartan3an", 0xb},
+ {"spartan3adsp", 0xc},
+ {"spartan6", 0xd},
+ {"virtex6", 0xe},
+ {"virtex7", 0xf},
+ /* FIXME There is no key code defined for spartan2 */
+ {"spartan2", 0xf0},
+ {"kintex7", 0x10},
+ {"artix7", 0x11},
+ {"zynq7000", 0x12},
+ {"UltraScale Virtex", 0x13},
+ {"UltraScale Kintex", 0x14},
+ {"UltraScale+ Zynq", 0x15},
+ {"UltraScale+ Virtex", 0x16},
+ {"UltraScale+ Kintex", 0x17},
+ {"Spartan7", 0x18},
+ {NULL, 0},
+};
+
+struct cpuinfo cpuinfo;
+static struct device_node *cpu;
+
+void __init setup_cpuinfo(void)
+{
+ cpu = of_get_cpu_node(0, NULL);
+ if (!cpu)
+ pr_err("You don't have cpu or are missing cpu reg property!!!\n");
+
+ pr_info("%s: initialising\n", __func__);
+
+ switch (cpu_has_pvr()) {
+ case 0:
+ pr_warn("%s: No PVR support. Using static CPU info from FDT\n",
+ __func__);
+ set_cpuinfo_static(&cpuinfo, cpu);
+ break;
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
+ * please do not use FULL PVR with MMU */
+ case 1:
+ pr_info("%s: Using full CPU PVR support\n",
+ __func__);
+ set_cpuinfo_static(&cpuinfo, cpu);
+ set_cpuinfo_pvr_full(&cpuinfo, cpu);
+ break;
+ default:
+ pr_warn("%s: Unsupported PVR setting\n", __func__);
+ set_cpuinfo_static(&cpuinfo, cpu);
+ }
+
+ if (cpuinfo.mmu_privins)
+ pr_warn("%s: Stream instructions enabled"
+ " - USERSPACE CAN LOCK THIS KERNEL!\n", __func__);
+
+ of_node_put(cpu);
+}
+
+void __init setup_cpuinfo_clk(void)
+{
+ struct clk *clk;
+
+ clk = of_clk_get(cpu, 0);
+ if (IS_ERR(clk)) {
+ pr_err("ERROR: CPU CCF input clock not found\n");
+ /* take timebase-frequency from DTS */
+ cpuinfo.cpu_clock_freq = fcpu(cpu, "timebase-frequency");
+ } else {
+ cpuinfo.cpu_clock_freq = clk_get_rate(clk);
+ }
+
+ if (!cpuinfo.cpu_clock_freq) {
+ pr_err("ERROR: CPU clock frequency not setup\n");
+ BUG();
+ }
+}
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
new file mode 100644
index 0000000000..9581d194d9
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -0,0 +1,158 @@
+/*
+ * CPU-version specific code
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006-2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+
+#include <linux/bug.h>
+#include <asm/cpuinfo.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <linux/param.h>
+#include <asm/pvr.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *fpga_family = "Unknown";
+ char *cpu_ver = "Unknown";
+ int i;
+
+ /* Denormalised to get the fpga family string */
+ for (i = 0; family_string_lookup[i].s != NULL; i++) {
+ if (cpuinfo.fpga_family_code == family_string_lookup[i].k) {
+ fpga_family = (char *)family_string_lookup[i].s;
+ break;
+ }
+ }
+
+ /* Denormalised to get the hw version string */
+ for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+ if (cpuinfo.ver_code == cpu_ver_lookup[i].k) {
+ cpu_ver = (char *)cpu_ver_lookup[i].s;
+ break;
+ }
+ }
+
+ seq_printf(m,
+ "CPU-Family: MicroBlaze\n"
+ "FPGA-Arch: %s\n"
+ "CPU-Ver: %s, %s endian\n"
+ "CPU-MHz: %d.%02d\n"
+ "BogoMips: %lu.%02lu\n",
+ fpga_family,
+ cpu_ver,
+ cpuinfo.endian ? "little" : "big",
+ cpuinfo.cpu_clock_freq / 1000000,
+ cpuinfo.cpu_clock_freq % 1000000,
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100);
+
+ seq_printf(m,
+ "HW:\n Shift:\t\t%s\n"
+ " MSR:\t\t%s\n"
+ " PCMP:\t\t%s\n"
+ " DIV:\t\t%s\n",
+ (cpuinfo.use_instr & PVR0_USE_BARREL_MASK) ? "yes" : "no",
+ (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) ? "yes" : "no",
+ (cpuinfo.use_instr & PVR2_USE_PCMP_INSTR) ? "yes" : "no",
+ (cpuinfo.use_instr & PVR0_USE_DIV_MASK) ? "yes" : "no");
+
+ seq_printf(m, " MMU:\t\t%x\n", cpuinfo.mmu);
+
+ seq_printf(m,
+ " MUL:\t\t%s\n"
+ " FPU:\t\t%s\n",
+ (cpuinfo.use_mult & PVR2_USE_MUL64_MASK) ? "v2" :
+ (cpuinfo.use_mult & PVR0_USE_HW_MUL_MASK) ? "v1" : "no",
+ (cpuinfo.use_fpu & PVR2_USE_FPU2_MASK) ? "v2" :
+ (cpuinfo.use_fpu & PVR0_USE_FPU_MASK) ? "v1" : "no");
+
+ seq_printf(m,
+ " Exc:\t\t%s%s%s%s%s%s%s%s\n",
+ (cpuinfo.use_exc & PVR2_OPCODE_0x0_ILL_MASK) ? "op0x0 " : "",
+ (cpuinfo.use_exc & PVR2_UNALIGNED_EXC_MASK) ? "unal " : "",
+ (cpuinfo.use_exc & PVR2_ILL_OPCODE_EXC_MASK) ? "ill " : "",
+ (cpuinfo.use_exc & PVR2_IOPB_BUS_EXC_MASK) ? "iopb " : "",
+ (cpuinfo.use_exc & PVR2_DOPB_BUS_EXC_MASK) ? "dopb " : "",
+ (cpuinfo.use_exc & PVR2_DIV_ZERO_EXC_MASK) ? "zero " : "",
+ (cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "",
+ (cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : "");
+
+ seq_printf(m,
+ "Stream-insns:\t%sprivileged\n",
+ cpuinfo.mmu_privins ? "un" : "");
+
+ if (cpuinfo.use_icache)
+ seq_printf(m,
+ "Icache:\t\t%ukB\tline length:\t%dB\n",
+ cpuinfo.icache_size >> 10,
+ cpuinfo.icache_line_length);
+ else
+ seq_puts(m, "Icache:\t\tno\n");
+
+ if (cpuinfo.use_dcache) {
+ seq_printf(m,
+ "Dcache:\t\t%ukB\tline length:\t%dB\n",
+ cpuinfo.dcache_size >> 10,
+ cpuinfo.dcache_line_length);
+ seq_puts(m, "Dcache-Policy:\t");
+ if (cpuinfo.dcache_wb)
+ seq_puts(m, "write-back\n");
+ else
+ seq_puts(m, "write-through\n");
+ } else {
+ seq_puts(m, "Dcache:\t\tno\n");
+ }
+
+ seq_printf(m,
+ "HW-Debug:\t%s\n",
+ cpuinfo.hw_debug ? "yes" : "no");
+
+ seq_printf(m,
+ "PVR-USR1:\t%02x\n"
+ "PVR-USR2:\t%08x\n",
+ cpuinfo.pvr_user1,
+ cpuinfo.pvr_user2);
+
+ seq_printf(m, "Page size:\t%lu\n", PAGE_SIZE);
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ int i = *pos;
+
+ return i < NR_CPUS ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
new file mode 100644
index 0000000000..f139052a39
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -0,0 +1,81 @@
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <asm/exceptions.h>
+#include <asm/pvr.h>
+#include <linux/irqflags.h>
+
+/*
+ * Until we get an assembler that knows about the pvr registers,
+ * this horrible cruft will have to do.
+ * That hardcoded opcode is mfs r3, rpvrNN
+ */
+
+#define get_single_pvr(pvrid, val) \
+{ \
+ register unsigned tmp __asm__("r3"); \
+ tmp = 0x0; /* Prevent warning about unused */ \
+ __asm__ __volatile__ ( \
+ "mfs %0, rpvr" #pvrid ";" \
+ : "=r" (tmp) : : "memory"); \
+ val = tmp; \
+}
+
+/*
+ * Does the CPU support the PVR register?
+ * return value:
+ * 0: no PVR
+ * 1: simple PVR
+ * 2: full PVR
+ *
+ * This must work on all CPU versions, including those before the
+ * PVR was even an option.
+ */
+
+int cpu_has_pvr(void)
+{
+ unsigned long flags;
+ unsigned pvr0;
+
+ local_save_flags(flags);
+
+ /* PVR bit in MSR tells us if there is any support */
+ if (!(flags & PVR_MSR_BIT))
+ return 0;
+
+ get_single_pvr(0, pvr0);
+ pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
+
+ if (pvr0 & PVR0_PVR_FULL_MASK)
+ return 1;
+
+ /* for partial PVR use static cpuinfo */
+ return 2;
+}
+
+void get_pvr(struct pvr_s *p)
+{
+ get_single_pvr(0, p->pvr[0]);
+ get_single_pvr(1, p->pvr[1]);
+ get_single_pvr(2, p->pvr[2]);
+ get_single_pvr(3, p->pvr[3]);
+ get_single_pvr(4, p->pvr[4]);
+ get_single_pvr(5, p->pvr[5]);
+ get_single_pvr(6, p->pvr[6]);
+ get_single_pvr(7, p->pvr[7]);
+ get_single_pvr(8, p->pvr[8]);
+ get_single_pvr(9, p->pvr[9]);
+ get_single_pvr(10, p->pvr[10]);
+ get_single_pvr(11, p->pvr[11]);
+}
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
new file mode 100644
index 0000000000..04d091ade4
--- /dev/null
+++ b/arch/microblaze/kernel/dma.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009-2010 PetaLogix
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-map-ops.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/bug.h>
+#include <asm/cacheflush.h>
+
+static void __dma_sync(phys_addr_t paddr, size_t size,
+ enum dma_data_direction direction)
+{
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ case DMA_BIDIRECTIONAL:
+ flush_dcache_range(paddr, paddr + size);
+ break;
+ case DMA_FROM_DEVICE:
+ invalidate_dcache_range(paddr, paddr + size);
+ break;
+ default:
+ BUG();
+ }
+}
+
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+ enum dma_data_direction dir)
+{
+ __dma_sync(paddr, size, dir);
+}
+
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+ enum dma_data_direction dir)
+{
+ __dma_sync(paddr, size, dir);
+}
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
new file mode 100644
index 0000000000..582d7256d8
--- /dev/null
+++ b/arch/microblaze/kernel/entry.S
@@ -0,0 +1,1311 @@
+/*
+ * Low-level system-call handling, trap handlers and context-switching
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001,2002 NEC Corporation
+ * Copyright (C) 2001,2002 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Heavily modified by John Williams for Microblaze
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/exceptions.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/unistd.h>
+#include <asm/xilinx_mb_manager.h>
+
+#include <linux/errno.h>
+#include <asm/signal.h>
+#include <asm/mmu.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+/* Create space for syscalls counting. */
+.section .data
+.global syscall_debug_table
+.align 4
+syscall_debug_table:
+ .space (__NR_syscalls * 4)
+#endif /* DEBUG */
+
+#define C_ENTRY(name) .globl name; .align 4; name
+
+/*
+ * Various ways of setting and clearing BIP in flags reg.
+ * This is mucky, but necessary using microblaze version that
+ * allows msr ops to write to BIP
+ */
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ .macro clear_bip
+ msrclr r0, MSR_BIP
+ .endm
+
+ .macro set_bip
+ msrset r0, MSR_BIP
+ .endm
+
+ .macro clear_eip
+ msrclr r0, MSR_EIP
+ .endm
+
+ .macro set_ee
+ msrset r0, MSR_EE
+ .endm
+
+ .macro disable_irq
+ msrclr r0, MSR_IE
+ .endm
+
+ .macro enable_irq
+ msrset r0, MSR_IE
+ .endm
+
+ .macro set_ums
+ msrset r0, MSR_UMS
+ msrclr r0, MSR_VMS
+ .endm
+
+ .macro set_vms
+ msrclr r0, MSR_UMS
+ msrset r0, MSR_VMS
+ .endm
+
+ .macro clear_ums
+ msrclr r0, MSR_UMS
+ .endm
+
+ .macro clear_vms_ums
+ msrclr r0, MSR_VMS | MSR_UMS
+ .endm
+#else
+ .macro clear_bip
+ mfs r11, rmsr
+ andi r11, r11, ~MSR_BIP
+ mts rmsr, r11
+ .endm
+
+ .macro set_bip
+ mfs r11, rmsr
+ ori r11, r11, MSR_BIP
+ mts rmsr, r11
+ .endm
+
+ .macro clear_eip
+ mfs r11, rmsr
+ andi r11, r11, ~MSR_EIP
+ mts rmsr, r11
+ .endm
+
+ .macro set_ee
+ mfs r11, rmsr
+ ori r11, r11, MSR_EE
+ mts rmsr, r11
+ .endm
+
+ .macro disable_irq
+ mfs r11, rmsr
+ andi r11, r11, ~MSR_IE
+ mts rmsr, r11
+ .endm
+
+ .macro enable_irq
+ mfs r11, rmsr
+ ori r11, r11, MSR_IE
+ mts rmsr, r11
+ .endm
+
+ .macro set_ums
+ mfs r11, rmsr
+ ori r11, r11, MSR_VMS
+ andni r11, r11, MSR_UMS
+ mts rmsr, r11
+ .endm
+
+ .macro set_vms
+ mfs r11, rmsr
+ ori r11, r11, MSR_VMS
+ andni r11, r11, MSR_UMS
+ mts rmsr, r11
+ .endm
+
+ .macro clear_ums
+ mfs r11, rmsr
+ andni r11, r11, MSR_UMS
+ mts rmsr,r11
+ .endm
+
+ .macro clear_vms_ums
+ mfs r11, rmsr
+ andni r11, r11, (MSR_VMS|MSR_UMS)
+ mts rmsr,r11
+ .endm
+#endif
+
+/* Define how to call high-level functions. With MMU, virtual mode must be
+ * enabled when calling the high-level function. Clobbers R11.
+ * VM_ON, VM_OFF, DO_JUMP_BIPCLR, DO_CALL
+ */
+
+/* turn on virtual protected mode save */
+#define VM_ON \
+ set_ums; \
+ rted r0, 2f; \
+ nop; \
+2:
+
+/* turn off virtual protected mode save and user mode save*/
+#define VM_OFF \
+ clear_vms_ums; \
+ rted r0, TOPHYS(1f); \
+ nop; \
+1:
+
+#define SAVE_REGS \
+ swi r2, r1, PT_R2; /* Save SDA */ \
+ swi r3, r1, PT_R3; \
+ swi r4, r1, PT_R4; \
+ swi r5, r1, PT_R5; \
+ swi r6, r1, PT_R6; \
+ swi r7, r1, PT_R7; \
+ swi r8, r1, PT_R8; \
+ swi r9, r1, PT_R9; \
+ swi r10, r1, PT_R10; \
+ swi r11, r1, PT_R11; /* save clobbered regs after rval */\
+ swi r12, r1, PT_R12; \
+ swi r13, r1, PT_R13; /* Save SDA2 */ \
+ swi r14, r1, PT_PC; /* PC, before IRQ/trap */ \
+ swi r15, r1, PT_R15; /* Save LP */ \
+ swi r16, r1, PT_R16; \
+ swi r17, r1, PT_R17; \
+ swi r18, r1, PT_R18; /* Save asm scratch reg */ \
+ swi r19, r1, PT_R19; \
+ swi r20, r1, PT_R20; \
+ swi r21, r1, PT_R21; \
+ swi r22, r1, PT_R22; \
+ swi r23, r1, PT_R23; \
+ swi r24, r1, PT_R24; \
+ swi r25, r1, PT_R25; \
+ swi r26, r1, PT_R26; \
+ swi r27, r1, PT_R27; \
+ swi r28, r1, PT_R28; \
+ swi r29, r1, PT_R29; \
+ swi r30, r1, PT_R30; \
+ swi r31, r1, PT_R31; /* Save current task reg */ \
+ mfs r11, rmsr; /* save MSR */ \
+ swi r11, r1, PT_MSR;
+
+#define RESTORE_REGS_GP \
+ lwi r2, r1, PT_R2; /* restore SDA */ \
+ lwi r3, r1, PT_R3; \
+ lwi r4, r1, PT_R4; \
+ lwi r5, r1, PT_R5; \
+ lwi r6, r1, PT_R6; \
+ lwi r7, r1, PT_R7; \
+ lwi r8, r1, PT_R8; \
+ lwi r9, r1, PT_R9; \
+ lwi r10, r1, PT_R10; \
+ lwi r11, r1, PT_R11; /* restore clobbered regs after rval */\
+ lwi r12, r1, PT_R12; \
+ lwi r13, r1, PT_R13; /* restore SDA2 */ \
+ lwi r14, r1, PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\
+ lwi r15, r1, PT_R15; /* restore LP */ \
+ lwi r16, r1, PT_R16; \
+ lwi r17, r1, PT_R17; \
+ lwi r18, r1, PT_R18; /* restore asm scratch reg */ \
+ lwi r19, r1, PT_R19; \
+ lwi r20, r1, PT_R20; \
+ lwi r21, r1, PT_R21; \
+ lwi r22, r1, PT_R22; \
+ lwi r23, r1, PT_R23; \
+ lwi r24, r1, PT_R24; \
+ lwi r25, r1, PT_R25; \
+ lwi r26, r1, PT_R26; \
+ lwi r27, r1, PT_R27; \
+ lwi r28, r1, PT_R28; \
+ lwi r29, r1, PT_R29; \
+ lwi r30, r1, PT_R30; \
+ lwi r31, r1, PT_R31; /* Restore cur task reg */
+
+#define RESTORE_REGS \
+ lwi r11, r1, PT_MSR; \
+ mts rmsr , r11; \
+ RESTORE_REGS_GP
+
+#define RESTORE_REGS_RTBD \
+ lwi r11, r1, PT_MSR; \
+ andni r11, r11, MSR_EIP; /* clear EIP */ \
+ ori r11, r11, MSR_EE | MSR_BIP; /* set EE and BIP */ \
+ mts rmsr , r11; \
+ RESTORE_REGS_GP
+
+#define SAVE_STATE \
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* save stack */ \
+ /* See if already in kernel mode.*/ \
+ mfs r1, rmsr; \
+ andi r1, r1, MSR_UMS; \
+ bnei r1, 1f; \
+ /* Kernel-mode state save. */ \
+ /* Reload kernel stack-ptr. */ \
+ lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); \
+ /* FIXME: I can add these two lines to one */ \
+ /* tophys(r1,r1); */ \
+ /* addik r1, r1, -PT_SIZE; */ \
+ addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; \
+ SAVE_REGS \
+ brid 2f; \
+ swi r1, r1, PT_MODE; \
+1: /* User-mode state save. */ \
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+ tophys(r1,r1); \
+ lwi r1, r1, TS_THREAD_INFO; /* get the thread info */ \
+ /* MS these three instructions can be added to one */ \
+ /* addik r1, r1, THREAD_SIZE; */ \
+ /* tophys(r1,r1); */ \
+ /* addik r1, r1, -PT_SIZE; */ \
+ addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; \
+ SAVE_REGS \
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \
+ swi r11, r1, PT_R1; /* Store user SP. */ \
+ swi r0, r1, PT_MODE; /* Was in user-mode. */ \
+ /* MS: I am clearing UMS even in case when I come from kernel space */ \
+ clear_ums; \
+2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+
+.text
+
+.extern cpuinfo
+
+C_ENTRY(mb_flush_dcache):
+ addik r1, r1, -PT_SIZE
+ SAVE_REGS
+
+ addik r3, r0, cpuinfo
+ lwi r7, r3, CI_DCS
+ lwi r8, r3, CI_DCL
+ sub r9, r7, r8
+1:
+ wdc.flush r9, r0
+ bgtid r9, 1b
+ addk r9, r9, r8
+
+ RESTORE_REGS
+ addik r1, r1, PT_SIZE
+ rtsd r15, 8
+ nop
+
+C_ENTRY(mb_invalidate_icache):
+ addik r1, r1, -PT_SIZE
+ SAVE_REGS
+
+ addik r3, r0, cpuinfo
+ lwi r7, r3, CI_ICS
+ lwi r8, r3, CI_ICL
+ sub r9, r7, r8
+1:
+ wic r9, r0
+ bgtid r9, 1b
+ addk r9, r9, r8
+
+ RESTORE_REGS
+ addik r1, r1, PT_SIZE
+ rtsd r15, 8
+ nop
+
+/*
+ * User trap.
+ *
+ * System calls are handled here.
+ *
+ * Syscall protocol:
+ * Syscall number in r12, args in r5-r10
+ * Return value in r3
+ *
+ * Trap entered via brki instruction, so BIP bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ */
+C_ENTRY(_user_exception):
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ addi r14, r14, 4 /* return address is 4 byte after call */
+
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+ tophys(r1,r1);
+ lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */
+/* calculate kernel stack pointer from task struct 8k */
+ addik r1, r1, THREAD_SIZE;
+ tophys(r1,r1);
+
+ addik r1, r1, -PT_SIZE; /* Make room on the stack. */
+ SAVE_REGS
+ swi r0, r1, PT_R3
+ swi r0, r1, PT_R4
+
+ swi r0, r1, PT_MODE; /* Was in user-mode. */
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ swi r11, r1, PT_R1; /* Store user SP. */
+ clear_ums;
+2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+ /* Save away the syscall number. */
+ swi r12, r1, PT_R0;
+ tovirt(r1,r1)
+
+/* where the trap should return need -8 to adjust for rtsd r15, 8*/
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid. The LP
+ * register should point to the location where
+ * the called function should return. [note that MAKE_SYS_CALL uses label 1] */
+
+ /* Step into virtual mode */
+ rtbd r0, 3f
+ nop
+3:
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO /* get thread info */
+ lwi r11, r11, TI_FLAGS /* get flags in thread info */
+ andi r11, r11, _TIF_WORK_SYSCALL_MASK
+ beqi r11, 4f
+
+ addik r3, r0, -ENOSYS
+ swi r3, r1, PT_R3
+ brlid r15, do_syscall_trace_enter
+ addik r5, r1, PT_R0
+
+ # do_syscall_trace_enter returns the new syscall nr.
+ addk r12, r0, r3
+ lwi r5, r1, PT_R5;
+ lwi r6, r1, PT_R6;
+ lwi r7, r1, PT_R7;
+ lwi r8, r1, PT_R8;
+ lwi r9, r1, PT_R9;
+ lwi r10, r1, PT_R10;
+4:
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid.
+ * The LP register should point to the location where the called function
+ * should return. [note that MAKE_SYS_CALL uses label 1] */
+ /* See if the system call number is valid */
+ blti r12, 5f
+ addi r11, r12, -__NR_syscalls;
+ bgei r11, 5f;
+ /* Figure out which function to use for this system call. */
+ /* Note Microblaze barrel shift is optional, so don't rely on it */
+ add r12, r12, r12; /* convert num -> ptr */
+ add r12, r12, r12;
+ addi r30, r0, 1 /* restarts allowed */
+
+#ifdef DEBUG
+ /* Trac syscalls and stored them to syscall_debug_table */
+ /* The first syscall location stores total syscall number */
+ lwi r3, r0, syscall_debug_table
+ addi r3, r3, 1
+ swi r3, r0, syscall_debug_table
+ lwi r3, r12, syscall_debug_table
+ addi r3, r3, 1
+ swi r3, r12, syscall_debug_table
+#endif
+
+ # Find and jump into the syscall handler.
+ lwi r12, r12, sys_call_table
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ addi r15, r0, ret_from_trap-8
+ bra r12
+
+ /* The syscall number is invalid, return an error. */
+5:
+ braid ret_from_trap
+ addi r3, r0, -ENOSYS;
+
+/* Entry point used to return from a syscall/trap */
+/* We re-enable BIP bit before state restore */
+C_ENTRY(ret_from_trap):
+ swi r3, r1, PT_R3
+ swi r4, r1, PT_R4
+
+ lwi r11, r1, PT_MODE;
+/* See if returning to kernel mode, if so, skip resched &c. */
+ bnei r11, 2f;
+ /* We're returning to user mode, so check for various conditions that
+ * trigger rescheduling. */
+ /* FIXME: Restructure all these flag checks. */
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_WORK_SYSCALL_MASK
+ beqi r11, 1f
+
+ brlid r15, do_syscall_trace_leave
+ addik r5, r1, PT_R0
+1:
+ /* We're returning to user mode, so check for various conditions that
+ * trigger rescheduling. */
+ /* get thread info from current task */
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO;
+ lwi r19, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r19, _TIF_NEED_RESCHED;
+ beqi r11, 5f;
+
+ bralid r15, schedule; /* Call scheduler */
+ nop; /* delay slot */
+ bri 1b
+
+ /* Maybe handle a signal */
+5:
+ andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME;
+ beqi r11, 4f; /* Signals to handle, handle them */
+
+ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
+ bralid r15, do_notify_resume; /* Handle any signals */
+ add r6, r30, r0; /* Arg 2: int in_syscall */
+ add r30, r0, r0 /* no more restarts */
+ bri 1b
+
+/* Finally, return to user state. */
+4: set_bip; /* Ints masked for state restore */
+ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
+ VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS_RTBD;
+ addik r1, r1, PT_SIZE /* Clean up stack space. */
+ lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
+ bri 6f;
+
+/* Return to kernel state. */
+2: set_bip; /* Ints masked for state restore */
+ VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS_RTBD;
+ addik r1, r1, PT_SIZE /* Clean up stack space. */
+ tovirt(r1,r1);
+6:
+TRAP_return: /* Make global symbol for debugging */
+ rtbd r14, 0; /* Instructions to return from an IRQ */
+ nop;
+
+
+/* This the initial entry point for a new child thread, with an appropriate
+ stack in place that makes it look like the child is in the middle of a
+ syscall. This function is actually `returned to' from switch_thread
+ (copy_thread makes ret_from_fork the return address in each new thread's
+ saved context). */
+C_ENTRY(ret_from_fork):
+ bralid r15, schedule_tail; /* ...which is schedule_tail's arg */
+ add r5, r3, r0; /* switch_thread returns the prev task */
+ /* ( in the delay slot ) */
+ brid ret_from_trap; /* Do normal trap return */
+ add r3, r0, r0; /* Child's fork call should return 0. */
+
+C_ENTRY(ret_from_kernel_thread):
+ bralid r15, schedule_tail; /* ...which is schedule_tail's arg */
+ add r5, r3, r0; /* switch_thread returns the prev task */
+ /* ( in the delay slot ) */
+ brald r15, r20 /* fn was left in r20 */
+ addk r5, r0, r19 /* ... and argument - in r19 */
+ brid ret_from_trap
+ add r3, r0, r0
+
+C_ENTRY(sys_rt_sigreturn_wrapper):
+ addik r30, r0, 0 /* no restarts */
+ brid sys_rt_sigreturn /* Do real work */
+ addik r5, r1, 0; /* add user context as 1st arg */
+
+/*
+ * HW EXCEPTION rutine start
+ */
+C_ENTRY(full_exception_trap):
+ /* adjust exception address for privileged instruction
+ * for finding where is it */
+ addik r17, r17, -4
+ SAVE_STATE /* Save registers */
+ /* PC, before IRQ/trap - this is one instruction above */
+ swi r17, r1, PT_PC;
+ tovirt(r1,r1)
+ /* FIXME this can be store directly in PT_ESR reg.
+ * I tested it but there is a fault */
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ addik r15, r0, ret_from_exc - 8
+ mfs r6, resr
+ mfs r7, rfsr; /* save FSR */
+ mts rfsr, r0; /* Clear sticky fsr */
+ rted r0, full_exception
+ addik r5, r1, 0 /* parameter struct pt_regs * regs */
+
+/*
+ * Unaligned data trap.
+ *
+ * Unaligned data trap last on 4k page is handled here.
+ *
+ * Trap entered via exception, so EE bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ *
+ * The assembler routine is in "arch/microblaze/kernel/hw_exception_handler.S"
+ */
+C_ENTRY(unaligned_data_trap):
+ /* MS: I have to save r11 value and then restore it because
+ * set_bit, clear_eip, set_ee use r11 as temp register if MSR
+ * instructions are not used. We don't need to do if MSR instructions
+ * are used and they use r0 instead of r11.
+ * I am using ENTRY_SP which should be primary used only for stack
+ * pointer saving. */
+ swi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ set_bip; /* equalize initial state for all possible entries */
+ clear_eip;
+ set_ee;
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ SAVE_STATE /* Save registers.*/
+ /* PC, before IRQ/trap - this is one instruction above */
+ swi r17, r1, PT_PC;
+ tovirt(r1,r1)
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ addik r15, r0, ret_from_exc-8
+ mfs r3, resr /* ESR */
+ mfs r4, rear /* EAR */
+ rtbd r0, _unaligned_data_exception
+ addik r7, r1, 0 /* parameter struct pt_regs * regs */
+
+/*
+ * Page fault traps.
+ *
+ * If the real exception handler (from hw_exception_handler.S) didn't find
+ * the mapping for the process, then we're thrown here to handle such situation.
+ *
+ * Trap entered via exceptions, so EE bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ *
+ * Build a standard exception frame for TLB Access errors. All TLB exceptions
+ * will bail out to this point if they can't resolve the lightweight TLB fault.
+ *
+ * The C function called is in "arch/microblaze/mm/fault.c", declared as:
+ * void do_page_fault(struct pt_regs *regs,
+ * unsigned long address,
+ * unsigned long error_code)
+ */
+/* data and intruction trap - which is choose is resolved int fault.c */
+C_ENTRY(page_fault_data_trap):
+ SAVE_STATE /* Save registers.*/
+ /* PC, before IRQ/trap - this is one instruction above */
+ swi r17, r1, PT_PC;
+ tovirt(r1,r1)
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ addik r15, r0, ret_from_exc-8
+ mfs r6, rear /* parameter unsigned long address */
+ mfs r7, resr /* parameter unsigned long error_code */
+ rted r0, do_page_fault
+ addik r5, r1, 0 /* parameter struct pt_regs * regs */
+
+C_ENTRY(page_fault_instr_trap):
+ SAVE_STATE /* Save registers.*/
+ /* PC, before IRQ/trap - this is one instruction above */
+ swi r17, r1, PT_PC;
+ tovirt(r1,r1)
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ addik r15, r0, ret_from_exc-8
+ mfs r6, rear /* parameter unsigned long address */
+ ori r7, r0, 0 /* parameter unsigned long error_code */
+ rted r0, do_page_fault
+ addik r5, r1, 0 /* parameter struct pt_regs * regs */
+
+/* Entry point used to return from an exception. */
+C_ENTRY(ret_from_exc):
+ lwi r11, r1, PT_MODE;
+ bnei r11, 2f; /* See if returning to kernel mode, */
+ /* ... if so, skip resched &c. */
+
+ /* We're returning to user mode, so check for various conditions that
+ trigger rescheduling. */
+1:
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */
+ lwi r19, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r19, _TIF_NEED_RESCHED;
+ beqi r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+ bralid r15, schedule; /* Call scheduler */
+ nop; /* delay slot */
+ bri 1b
+
+ /* Maybe handle a signal */
+5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME;
+ beqi r11, 4f; /* Signals to handle, handle them */
+
+ /*
+ * Handle a signal return; Pending signals should be in r18.
+ *
+ * Not all registers are saved by the normal trap/interrupt entry
+ * points (for instance, call-saved registers (because the normal
+ * C-compiler calling sequence in the kernel makes sure they're
+ * preserved), and call-clobbered registers in the case of
+ * traps), but signal handlers may want to examine or change the
+ * complete register state. Here we save anything not saved by
+ * the normal entry sequence, so that it may be safely restored
+ * (in a possibly modified form) after do_notify_resume returns. */
+ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
+ bralid r15, do_notify_resume; /* Handle any signals */
+ addi r6, r0, 0; /* Arg 2: int in_syscall */
+ bri 1b
+
+/* Finally, return to user state. */
+4: set_bip; /* Ints masked for state restore */
+ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
+ VM_OFF;
+ tophys(r1,r1);
+
+ RESTORE_REGS_RTBD;
+ addik r1, r1, PT_SIZE /* Clean up stack space. */
+
+ lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */
+ bri 6f;
+/* Return to kernel state. */
+2: set_bip; /* Ints masked for state restore */
+ VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS_RTBD;
+ addik r1, r1, PT_SIZE /* Clean up stack space. */
+
+ tovirt(r1,r1);
+6:
+EXC_return: /* Make global symbol for debugging */
+ rtbd r14, 0; /* Instructions to return from an IRQ */
+ nop;
+
+/*
+ * HW EXCEPTION rutine end
+ */
+
+/*
+ * Hardware maskable interrupts.
+ *
+ * The stack-pointer (r1) should have already been saved to the memory
+ * location PER_CPU(ENTRY_SP).
+ */
+C_ENTRY(_interrupt):
+/* MS: we are in physical address */
+/* Save registers, switch to proper stack, convert SP to virtual.*/
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+ /* MS: See if already in kernel mode. */
+ mfs r1, rmsr
+ nop
+ andi r1, r1, MSR_UMS
+ bnei r1, 1f
+
+/* Kernel-mode state save. */
+ lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+ tophys(r1,r1); /* MS: I have in r1 physical address where stack is */
+ /* save registers */
+/* MS: Make room on the stack -> activation record */
+ addik r1, r1, -PT_SIZE;
+ SAVE_REGS
+ brid 2f;
+ swi r1, r1, PT_MODE; /* 0 - user mode, 1 - kernel mode */
+1:
+/* User-mode state save. */
+ /* MS: get the saved current */
+ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+ tophys(r1,r1);
+ lwi r1, r1, TS_THREAD_INFO;
+ addik r1, r1, THREAD_SIZE;
+ tophys(r1,r1);
+ /* save registers */
+ addik r1, r1, -PT_SIZE;
+ SAVE_REGS
+ /* calculate mode */
+ swi r0, r1, PT_MODE;
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ swi r11, r1, PT_R1;
+ clear_ums;
+2:
+ lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+ tovirt(r1,r1)
+ addik r15, r0, irq_call;
+irq_call:rtbd r0, do_IRQ;
+ addik r5, r1, 0;
+
+/* MS: we are in virtual mode */
+ret_from_irq:
+ lwi r11, r1, PT_MODE;
+ bnei r11, 2f;
+
+1:
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO;
+ lwi r19, r11, TI_FLAGS; /* MS: get flags from thread info */
+ andi r11, r19, _TIF_NEED_RESCHED;
+ beqi r11, 5f
+ bralid r15, schedule;
+ nop; /* delay slot */
+ bri 1b
+
+ /* Maybe handle a signal */
+5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME;
+ beqid r11, no_intr_resched
+/* Handle a signal return; Pending signals should be in r18. */
+ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
+ bralid r15, do_notify_resume; /* Handle any signals */
+ addi r6, r0, 0; /* Arg 2: int in_syscall */
+ bri 1b
+
+/* Finally, return to user state. */
+no_intr_resched:
+ /* Disable interrupts, we are now committed to the state restore */
+ disable_irq
+ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE);
+ VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS
+ addik r1, r1, PT_SIZE /* MS: Clean up stack space. */
+ lwi r1, r1, PT_R1 - PT_SIZE;
+ bri 6f;
+/* MS: Return to kernel state. */
+2:
+#ifdef CONFIG_PREEMPTION
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO;
+ /* MS: get preempt_count from thread info */
+ lwi r5, r11, TI_PREEMPT_COUNT;
+ bgti r5, restore;
+
+ lwi r5, r11, TI_FLAGS; /* get flags in thread info */
+ andi r5, r5, _TIF_NEED_RESCHED;
+ beqi r5, restore /* if zero jump over */
+
+ /* interrupts are off that's why I am calling preempt_chedule_irq */
+ bralid r15, preempt_schedule_irq
+ nop
+restore:
+#endif
+ VM_OFF /* MS: turn off MMU */
+ tophys(r1,r1)
+ RESTORE_REGS
+ addik r1, r1, PT_SIZE /* MS: Clean up stack space. */
+ tovirt(r1,r1);
+6:
+IRQ_return: /* MS: Make global symbol for debugging */
+ rtid r14, 0
+ nop
+
+#ifdef CONFIG_MB_MANAGER
+
+#define PT_PID PT_SIZE
+#define PT_TLBI PT_SIZE + 4
+#define PT_ZPR PT_SIZE + 8
+#define PT_TLBL0 PT_SIZE + 12
+#define PT_TLBH0 PT_SIZE + 16
+
+C_ENTRY(_xtmr_manager_reset):
+ lwi r1, r0, xmb_manager_stackpointer
+
+ /* Restore MSR */
+ lwi r2, r1, PT_MSR
+ mts rmsr, r2
+ bri 4
+
+ /* restore Special purpose registers */
+ lwi r2, r1, PT_PID
+ mts rpid, r2
+
+ lwi r2, r1, PT_TLBI
+ mts rtlbx, r2
+
+ lwi r2, r1, PT_ZPR
+ mts rzpr, r2
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_FPU
+ lwi r2, r1, PT_FSR
+ mts rfsr, r2
+#endif
+
+ /* restore all the tlb's */
+ addik r3, r0, TOPHYS(tlb_skip)
+ addik r6, r0, PT_TLBL0
+ addik r7, r0, PT_TLBH0
+restore_tlb:
+ add r6, r6, r1
+ add r7, r7, r1
+ lwi r2, r6, 0
+ mts rtlblo, r2
+ lwi r2, r7, 0
+ mts rtlbhi, r2
+ addik r6, r6, 4
+ addik r7, r7, 4
+ bgtid r3, restore_tlb
+ addik r3, r3, -1
+
+ lwi r5, r0, TOPHYS(xmb_manager_dev)
+ lwi r8, r0, TOPHYS(xmb_manager_reset_callback)
+ set_vms
+ /* return from reset need -8 to adjust for rtsd r15, 8 */
+ addik r15, r0, ret_from_reset - 8
+ rtbd r8, 0
+ nop
+
+ret_from_reset:
+ set_bip /* Ints masked for state restore */
+ VM_OFF
+ /* MS: Restore all regs */
+ RESTORE_REGS
+ lwi r14, r1, PT_R14
+ lwi r16, r1, PT_PC
+ addik r1, r1, PT_SIZE + 36
+ rtbd r16, 0
+ nop
+
+/*
+ * Break handler for MB Manager. Enter to _xmb_manager_break by
+ * injecting fault in one of the TMR Microblaze core.
+ * FIXME: This break handler supports getting
+ * called from kernel space only.
+ */
+C_ENTRY(_xmb_manager_break):
+ /*
+ * Reserve memory in the stack for context store/restore
+ * (which includes memory for storing tlbs (max two tlbs))
+ */
+ addik r1, r1, -PT_SIZE - 36
+ swi r1, r0, xmb_manager_stackpointer
+ SAVE_REGS
+ swi r14, r1, PT_R14 /* rewrite saved R14 value */
+ swi r16, r1, PT_PC; /* PC and r16 are the same */
+
+ lwi r6, r0, TOPHYS(xmb_manager_baseaddr)
+ lwi r7, r0, TOPHYS(xmb_manager_crval)
+ /*
+ * When the break vector gets asserted because of error injection,
+ * the break signal must be blocked before exiting from the
+ * break handler, below code configures the tmr manager
+ * control register to block break signal.
+ */
+ swi r7, r6, 0
+
+ /* Save the special purpose registers */
+ mfs r2, rpid
+ swi r2, r1, PT_PID
+
+ mfs r2, rtlbx
+ swi r2, r1, PT_TLBI
+
+ mfs r2, rzpr
+ swi r2, r1, PT_ZPR
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_FPU
+ mfs r2, rfsr
+ swi r2, r1, PT_FSR
+#endif
+ mfs r2, rmsr
+ swi r2, r1, PT_MSR
+
+ /* Save all the tlb's */
+ addik r3, r0, TOPHYS(tlb_skip)
+ addik r6, r0, PT_TLBL0
+ addik r7, r0, PT_TLBH0
+save_tlb:
+ add r6, r6, r1
+ add r7, r7, r1
+ mfs r2, rtlblo
+ swi r2, r6, 0
+ mfs r2, rtlbhi
+ swi r2, r7, 0
+ addik r6, r6, 4
+ addik r7, r7, 4
+ bgtid r3, save_tlb
+ addik r3, r3, -1
+
+ lwi r5, r0, TOPHYS(xmb_manager_dev)
+ lwi r8, r0, TOPHYS(xmb_manager_callback)
+ /* return from break need -8 to adjust for rtsd r15, 8 */
+ addik r15, r0, ret_from_break - 8
+ rtbd r8, 0
+ nop
+
+ret_from_break:
+ /* flush the d-cache */
+ bralid r15, mb_flush_dcache
+ nop
+
+ /*
+ * To make sure microblaze i-cache is in a proper state
+ * invalidate the i-cache.
+ */
+ bralid r15, mb_invalidate_icache
+ nop
+
+ set_bip; /* Ints masked for state restore */
+ VM_OFF;
+ mbar 1
+ mbar 2
+ bri 4
+ suspend
+ nop
+#endif
+
+/*
+ * Debug trap for KGDB. Enter to _debug_exception by brki r16, 0x18
+ * and call handling function with saved pt_regs
+ */
+C_ENTRY(_debug_exception):
+ /* BIP bit is set on entry, no interrupts can occur */
+ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+
+ mfs r1, rmsr
+ nop
+ andi r1, r1, MSR_UMS
+ bnei r1, 1f
+/* MS: Kernel-mode state save - kgdb */
+ lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+
+ /* BIP bit is set on entry, no interrupts can occur */
+ addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE;
+ SAVE_REGS;
+ /* save all regs to pt_reg structure */
+ swi r0, r1, PT_R0; /* R0 must be saved too */
+ swi r14, r1, PT_R14 /* rewrite saved R14 value */
+ swi r16, r1, PT_PC; /* PC and r16 are the same */
+ /* save special purpose registers to pt_regs */
+ mfs r11, rear;
+ swi r11, r1, PT_EAR;
+ mfs r11, resr;
+ swi r11, r1, PT_ESR;
+ mfs r11, rfsr;
+ swi r11, r1, PT_FSR;
+
+ /* stack pointer is in physical address at it is decrease
+ * by PT_SIZE but we need to get correct R1 value */
+ addik r11, r1, CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR + PT_SIZE;
+ swi r11, r1, PT_R1
+ /* MS: r31 - current pointer isn't changed */
+ tovirt(r1,r1)
+#ifdef CONFIG_KGDB
+ addi r5, r1, 0 /* pass pt_reg address as the first arg */
+ addik r15, r0, dbtrap_call; /* return address */
+ rtbd r0, microblaze_kgdb_break
+ nop;
+#endif
+ /* MS: Place handler for brki from kernel space if KGDB is OFF.
+ * It is very unlikely that another brki instruction is called. */
+ bri 0
+
+/* MS: User-mode state save - gdb */
+1: lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+ tophys(r1,r1);
+ lwi r1, r1, TS_THREAD_INFO; /* get the thread info */
+ addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */
+ tophys(r1,r1);
+
+ addik r1, r1, -PT_SIZE; /* Make room on the stack. */
+ SAVE_REGS;
+ swi r16, r1, PT_PC; /* Save LP */
+ swi r0, r1, PT_MODE; /* Was in user-mode. */
+ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+ swi r11, r1, PT_R1; /* Store user SP. */
+ lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+ tovirt(r1,r1)
+ set_vms;
+ addik r5, r1, 0;
+ addik r15, r0, dbtrap_call;
+dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */
+ rtbd r0, sw_exception
+ nop
+
+ /* MS: The first instruction for the second part of the gdb/kgdb */
+ set_bip; /* Ints masked for state restore */
+ lwi r11, r1, PT_MODE;
+ bnei r11, 2f;
+/* MS: Return to user space - gdb */
+1:
+ /* Get current task ptr into r11 */
+ lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */
+ lwi r19, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r19, _TIF_NEED_RESCHED;
+ beqi r11, 5f;
+
+ /* Call the scheduler before returning from a syscall/trap. */
+ bralid r15, schedule; /* Call scheduler */
+ nop; /* delay slot */
+ bri 1b
+
+ /* Maybe handle a signal */
+5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME;
+ beqi r11, 4f; /* Signals to handle, handle them */
+
+ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */
+ bralid r15, do_notify_resume; /* Handle any signals */
+ addi r6, r0, 0; /* Arg 2: int in_syscall */
+ bri 1b
+
+/* Finally, return to user state. */
+4: swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
+ VM_OFF;
+ tophys(r1,r1);
+ /* MS: Restore all regs */
+ RESTORE_REGS_RTBD
+ addik r1, r1, PT_SIZE /* Clean up stack space */
+ lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer */
+DBTRAP_return_user: /* MS: Make global symbol for debugging */
+ rtbd r16, 0; /* MS: Instructions to return from a debug trap */
+ nop;
+
+/* MS: Return to kernel state - kgdb */
+2: VM_OFF;
+ tophys(r1,r1);
+ /* MS: Restore all regs */
+ RESTORE_REGS_RTBD
+ lwi r14, r1, PT_R14;
+ lwi r16, r1, PT_PC;
+ addik r1, r1, PT_SIZE; /* MS: Clean up stack space */
+ tovirt(r1,r1);
+DBTRAP_return_kernel: /* MS: Make global symbol for debugging */
+ rtbd r16, 0; /* MS: Instructions to return from a debug trap */
+ nop;
+
+
+ENTRY(_switch_to)
+ /* prepare return value */
+ addk r3, r0, CURRENT_TASK
+
+ /* save registers in cpu_context */
+ /* use r11 and r12, volatile registers, as temp register */
+ /* give start of cpu_context for previous process */
+ addik r11, r5, TI_CPU_CONTEXT
+ swi r1, r11, CC_R1
+ swi r2, r11, CC_R2
+ /* skip volatile registers.
+ * they are saved on stack when we jumped to _switch_to() */
+ /* dedicated registers */
+ swi r13, r11, CC_R13
+ swi r14, r11, CC_R14
+ swi r15, r11, CC_R15
+ swi r16, r11, CC_R16
+ swi r17, r11, CC_R17
+ swi r18, r11, CC_R18
+ /* save non-volatile registers */
+ swi r19, r11, CC_R19
+ swi r20, r11, CC_R20
+ swi r21, r11, CC_R21
+ swi r22, r11, CC_R22
+ swi r23, r11, CC_R23
+ swi r24, r11, CC_R24
+ swi r25, r11, CC_R25
+ swi r26, r11, CC_R26
+ swi r27, r11, CC_R27
+ swi r28, r11, CC_R28
+ swi r29, r11, CC_R29
+ swi r30, r11, CC_R30
+ /* special purpose registers */
+ mfs r12, rmsr
+ swi r12, r11, CC_MSR
+ mfs r12, rear
+ swi r12, r11, CC_EAR
+ mfs r12, resr
+ swi r12, r11, CC_ESR
+ mfs r12, rfsr
+ swi r12, r11, CC_FSR
+
+ /* update r31, the current-give me pointer to task which will be next */
+ lwi CURRENT_TASK, r6, TI_TASK
+ /* stored it to current_save too */
+ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE)
+
+ /* get new process' cpu context and restore */
+ /* give me start where start context of next task */
+ addik r11, r6, TI_CPU_CONTEXT
+
+ /* non-volatile registers */
+ lwi r30, r11, CC_R30
+ lwi r29, r11, CC_R29
+ lwi r28, r11, CC_R28
+ lwi r27, r11, CC_R27
+ lwi r26, r11, CC_R26
+ lwi r25, r11, CC_R25
+ lwi r24, r11, CC_R24
+ lwi r23, r11, CC_R23
+ lwi r22, r11, CC_R22
+ lwi r21, r11, CC_R21
+ lwi r20, r11, CC_R20
+ lwi r19, r11, CC_R19
+ /* dedicated registers */
+ lwi r18, r11, CC_R18
+ lwi r17, r11, CC_R17
+ lwi r16, r11, CC_R16
+ lwi r15, r11, CC_R15
+ lwi r14, r11, CC_R14
+ lwi r13, r11, CC_R13
+ /* skip volatile registers */
+ lwi r2, r11, CC_R2
+ lwi r1, r11, CC_R1
+
+ /* special purpose registers */
+ lwi r12, r11, CC_FSR
+ mts rfsr, r12
+ lwi r12, r11, CC_MSR
+ mts rmsr, r12
+
+ rtsd r15, 8
+ nop
+
+#ifdef CONFIG_MB_MANAGER
+.global xmb_inject_err
+.section .text
+.align 2
+.ent xmb_inject_err
+.type xmb_inject_err, @function
+xmb_inject_err:
+ addik r1, r1, -PT_SIZE
+ SAVE_REGS
+
+ /* Switch to real mode */
+ VM_OFF;
+ set_bip;
+ mbar 1
+ mbar 2
+ bralid r15, XMB_INJECT_ERR_OFFSET
+ nop;
+
+ /* enable virtual mode */
+ set_vms;
+ /* barrier for instructions and data accesses */
+ mbar 1
+ mbar 2
+ /*
+ * Enable Interrupts, Virtual Protected Mode, equalize
+ * initial state for all possible entries.
+ */
+ rtbd r0, 1f
+ nop;
+1:
+ RESTORE_REGS
+ addik r1, r1, PT_SIZE
+ rtsd r15, 8;
+ nop;
+.end xmb_inject_err
+
+.section .data
+.global xmb_manager_dev
+.global xmb_manager_baseaddr
+.global xmb_manager_crval
+.global xmb_manager_callback
+.global xmb_manager_reset_callback
+.global xmb_manager_stackpointer
+.align 4
+xmb_manager_dev:
+ .long 0
+xmb_manager_baseaddr:
+ .long 0
+xmb_manager_crval:
+ .long 0
+xmb_manager_callback:
+ .long 0
+xmb_manager_reset_callback:
+ .long 0
+xmb_manager_stackpointer:
+ .long 0
+
+/*
+ * When the break vector gets asserted because of error injection,
+ * the break signal must be blocked before exiting from the
+ * break handler, Below api updates the manager address and
+ * control register and error count callback arguments,
+ * which will be used by the break handler to block the
+ * break and call the callback function.
+ */
+.global xmb_manager_register
+.section .text
+.align 2
+.ent xmb_manager_register
+.type xmb_manager_register, @function
+xmb_manager_register:
+ swi r5, r0, xmb_manager_baseaddr
+ swi r6, r0, xmb_manager_crval
+ swi r7, r0, xmb_manager_callback
+ swi r8, r0, xmb_manager_dev
+ swi r9, r0, xmb_manager_reset_callback
+
+ rtsd r15, 8;
+ nop;
+.end xmb_manager_register
+#endif
+
+ENTRY(_reset)
+ VM_OFF
+ brai 0; /* Jump to reset vector */
+
+ /* These are compiled and loaded into high memory, then
+ * copied into place in mach_early_setup */
+ .section .init.ivt, "ax"
+#if CONFIG_MANUAL_RESET_VECTOR && !defined(CONFIG_MB_MANAGER)
+ .org 0x0
+ brai CONFIG_MANUAL_RESET_VECTOR
+#elif defined(CONFIG_MB_MANAGER)
+ .org 0x0
+ brai TOPHYS(_xtmr_manager_reset);
+#endif
+ .org 0x8
+ brai TOPHYS(_user_exception); /* syscall handler */
+ .org 0x10
+ brai TOPHYS(_interrupt); /* Interrupt handler */
+#ifdef CONFIG_MB_MANAGER
+ .org 0x18
+ brai TOPHYS(_xmb_manager_break); /* microblaze manager break handler */
+#else
+ .org 0x18
+ brai TOPHYS(_debug_exception); /* debug trap handler */
+#endif
+ .org 0x20
+ brai TOPHYS(_hw_exception_handler); /* HW exception handler */
+
+#ifdef CONFIG_MB_MANAGER
+ /*
+ * For TMR Inject API which injects the error should
+ * be executed from LMB.
+ * TMR Inject is programmed with address of 0x200 so that
+ * when program counter matches with this address error will
+ * be injected. 0x200 is expected to be next available bram
+ * offset, hence used for this api.
+ */
+ .org XMB_INJECT_ERR_OFFSET
+xmb_inject_error:
+ nop
+ rtsd r15, 8
+ nop
+#endif
+
+.section .rodata,"a"
+#include "syscall_table.S"
+
+syscall_table_size=(.-sys_call_table)
+
+type_SYSCALL:
+ .ascii "SYSCALL\0"
+type_IRQ:
+ .ascii "IRQ\0"
+type_IRQ_PREEMPT:
+ .ascii "IRQ (PREEMPTED)\0"
+type_SYSCALL_PREEMPT:
+ .ascii " SYSCALL (PREEMPTED)\0"
+
+ /*
+ * Trap decoding for stack unwinder
+ * Tuples are (start addr, end addr, string)
+ * If return address lies on [start addr, end addr],
+ * unwinder displays 'string'
+ */
+
+ .align 4
+.global microblaze_trap_handlers
+microblaze_trap_handlers:
+ /* Exact matches come first */
+ .word ret_from_trap; .word ret_from_trap ; .word type_SYSCALL
+ .word ret_from_irq ; .word ret_from_irq ; .word type_IRQ
+ /* Fuzzy matches go here */
+ .word ret_from_irq ; .word no_intr_resched ; .word type_IRQ_PREEMPT
+ .word ret_from_trap; .word TRAP_return ; .word type_SYSCALL_PREEMPT
+ /* End of table */
+ .word 0 ; .word 0 ; .word 0
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
new file mode 100644
index 0000000000..fd153d5fab
--- /dev/null
+++ b/arch/microblaze/kernel/exceptions.c
@@ -0,0 +1,144 @@
+/*
+ * HW exception handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/kallsyms.h>
+
+#include <asm/exceptions.h>
+#include <asm/entry.h> /* For KM CPU var */
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/cacheflush.h>
+
+#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02
+#define MICROBLAZE_IBUS_EXCEPTION 0x03
+#define MICROBLAZE_DBUS_EXCEPTION 0x04
+#define MICROBLAZE_DIV_ZERO_EXCEPTION 0x05
+#define MICROBLAZE_FPU_EXCEPTION 0x06
+#define MICROBLAZE_PRIVILEGED_EXCEPTION 0x07
+
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *fp, long err)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ pr_warn("Oops: %s, sig: %ld\n", str, err);
+ show_regs(fp);
+ spin_unlock_irq(&die_lock);
+ /* make_task_dead() should take care of panic'ing from an interrupt
+ * context so we don't handle it here
+ */
+ make_task_dead(err);
+}
+
+/* for user application debugging */
+asmlinkage void sw_exception(struct pt_regs *regs)
+{
+ _exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16);
+ flush_dcache_range(regs->r16, regs->r16 + 0x4);
+ flush_icache_range(regs->r16, regs->r16 + 0x4);
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+ if (kernel_mode(regs))
+ die("Exception in kernel mode", regs, signr);
+
+ force_sig_fault(signr, code, (void __user *)addr);
+}
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+ int fsr, int addr)
+{
+ addr = regs->pc;
+
+#if 0
+ pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+ type, user_mode(regs) ? "user" : "kernel", fsr,
+ (unsigned int) regs->pc, (unsigned int) regs->esr);
+#endif
+
+ switch (type & 0x1F) {
+ case MICROBLAZE_ILL_OPCODE_EXCEPTION:
+ if (user_mode(regs)) {
+ pr_debug("Illegal opcode exception in user mode\n");
+ _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ return;
+ }
+ pr_warn("Illegal opcode exception in kernel mode.\n");
+ die("opcode exception", regs, SIGBUS);
+ break;
+ case MICROBLAZE_IBUS_EXCEPTION:
+ if (user_mode(regs)) {
+ pr_debug("Instruction bus error exception in user mode\n");
+ _exception(SIGBUS, regs, BUS_ADRERR, addr);
+ return;
+ }
+ pr_warn("Instruction bus error exception in kernel mode.\n");
+ die("bus exception", regs, SIGBUS);
+ break;
+ case MICROBLAZE_DBUS_EXCEPTION:
+ if (user_mode(regs)) {
+ pr_debug("Data bus error exception in user mode\n");
+ _exception(SIGBUS, regs, BUS_ADRERR, addr);
+ return;
+ }
+ pr_warn("Data bus error exception in kernel mode.\n");
+ die("bus exception", regs, SIGBUS);
+ break;
+ case MICROBLAZE_DIV_ZERO_EXCEPTION:
+ if (user_mode(regs)) {
+ pr_debug("Divide by zero exception in user mode\n");
+ _exception(SIGFPE, regs, FPE_INTDIV, addr);
+ return;
+ }
+ pr_warn("Divide by zero exception in kernel mode.\n");
+ die("Divide by zero exception", regs, SIGBUS);
+ break;
+ case MICROBLAZE_FPU_EXCEPTION:
+ pr_debug("FPU exception\n");
+ /* IEEE FP exception */
+ /* I removed fsr variable and use code var for storing fsr */
+ if (fsr & FSR_IO)
+ fsr = FPE_FLTINV;
+ else if (fsr & FSR_OF)
+ fsr = FPE_FLTOVF;
+ else if (fsr & FSR_UF)
+ fsr = FPE_FLTUND;
+ else if (fsr & FSR_DZ)
+ fsr = FPE_FLTDIV;
+ else if (fsr & FSR_DO)
+ fsr = FPE_FLTRES;
+ _exception(SIGFPE, regs, fsr, addr);
+ break;
+ case MICROBLAZE_PRIVILEGED_EXCEPTION:
+ pr_debug("Privileged exception\n");
+ _exception(SIGILL, regs, ILL_PRVOPC, addr);
+ break;
+ default:
+ /* FIXME what to do in unexpected exception */
+ pr_warn("Unexpected exception %02x PC=%08x in %s mode\n",
+ type, (unsigned int) addr,
+ kernel_mode(regs) ? "kernel" : "user");
+ }
+ return;
+}
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
new file mode 100644
index 0000000000..188749d627
--- /dev/null
+++ b/arch/microblaze/kernel/ftrace.c
@@ -0,0 +1,217 @@
+/*
+ * Ftrace support for Microblaze.
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * Based on MIPS and PowerPC ftrace code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/ftrace.h>
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+ unsigned long old;
+ int faulted;
+ unsigned long return_hooker = (unsigned long)
+ &return_to_handler;
+
+ if (unlikely(ftrace_graph_is_dead()))
+ return;
+
+ if (unlikely(atomic_read(&current->tracing_graph_pause)))
+ return;
+
+ /*
+ * Protect against fault, even if it shouldn't
+ * happen. This tool is too much intrusive to
+ * ignore such a protection.
+ */
+ asm volatile(" 1: lwi %0, %2, 0;" \
+ "2: swi %3, %2, 0;" \
+ " addik %1, r0, 0;" \
+ "3:" \
+ " .section .fixup, \"ax\";" \
+ "4: brid 3b;" \
+ " addik %1, r0, 1;" \
+ " .previous;" \
+ " .section __ex_table,\"a\";" \
+ " .word 1b,4b;" \
+ " .word 2b,4b;" \
+ " .previous;" \
+ : "=&r" (old), "=r" (faulted)
+ : "r" (parent), "r" (return_hooker)
+ );
+
+ flush_dcache_range((u32)parent, (u32)parent + 4);
+ flush_icache_range((u32)parent, (u32)parent + 4);
+
+ if (unlikely(faulted)) {
+ ftrace_graph_stop();
+ WARN_ON(1);
+ return;
+ }
+
+ if (function_graph_enter(old, self_addr, 0, NULL))
+ *parent = old;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* save value to addr - it is save to do it in asm */
+static int ftrace_modify_code(unsigned long addr, unsigned int value)
+{
+ int faulted = 0;
+
+ __asm__ __volatile__(" 1: swi %2, %1, 0;" \
+ " addik %0, r0, 0;" \
+ "2:" \
+ " .section .fixup, \"ax\";" \
+ "3: brid 2b;" \
+ " addik %0, r0, 1;" \
+ " .previous;" \
+ " .section __ex_table,\"a\";" \
+ " .word 1b,3b;" \
+ " .previous;" \
+ : "=r" (faulted)
+ : "r" (addr), "r" (value)
+ );
+
+ if (unlikely(faulted))
+ return -EFAULT;
+
+ flush_dcache_range(addr, addr + 4);
+ flush_icache_range(addr, addr + 4);
+
+ return 0;
+}
+
+#define MICROBLAZE_NOP 0x80000000
+#define MICROBLAZE_BRI 0xb800000C
+
+static unsigned int recorded; /* if save was or not */
+static unsigned int imm; /* saving whole imm instruction */
+
+/* There are two approaches howto solve ftrace_make nop function - look below */
+#undef USE_FTRACE_NOP
+
+#ifdef USE_FTRACE_NOP
+static unsigned int bralid; /* saving whole bralid instruction */
+#endif
+
+int ftrace_make_nop(struct module *mod,
+ struct dyn_ftrace *rec, unsigned long addr)
+{
+ /* we have this part of code which we are working with
+ * b000c000 imm -16384
+ * b9fc8e30 bralid r15, -29136 // c0008e30 <_mcount>
+ * 80000000 or r0, r0, r0
+ *
+ * The first solution (!USE_FTRACE_NOP-could be called branch solution)
+ * b000c000 bri 12 (0xC - jump to any other instruction)
+ * b9fc8e30 bralid r15, -29136 // c0008e30 <_mcount>
+ * 80000000 or r0, r0, r0
+ * any other instruction
+ *
+ * The second solution (USE_FTRACE_NOP) - no jump just nops
+ * 80000000 or r0, r0, r0
+ * 80000000 or r0, r0, r0
+ * 80000000 or r0, r0, r0
+ */
+ int ret = 0;
+
+ if (recorded == 0) {
+ recorded = 1;
+ imm = *(unsigned int *)rec->ip;
+ pr_debug("%s: imm:0x%x\n", __func__, imm);
+#ifdef USE_FTRACE_NOP
+ bralid = *(unsigned int *)(rec->ip + 4);
+ pr_debug("%s: bralid 0x%x\n", __func__, bralid);
+#endif /* USE_FTRACE_NOP */
+ }
+
+#ifdef USE_FTRACE_NOP
+ ret = ftrace_modify_code(rec->ip, MICROBLAZE_NOP);
+ ret += ftrace_modify_code(rec->ip + 4, MICROBLAZE_NOP);
+#else /* USE_FTRACE_NOP */
+ ret = ftrace_modify_code(rec->ip, MICROBLAZE_BRI);
+#endif /* USE_FTRACE_NOP */
+ return ret;
+}
+
+/* I believe that first is called ftrace_make_nop before this function */
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+ int ret;
+ pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n",
+ __func__, (unsigned int)addr, (unsigned int)rec->ip, imm);
+ ret = ftrace_modify_code(rec->ip, imm);
+#ifdef USE_FTRACE_NOP
+ pr_debug("%s: bralid:0x%x\n", __func__, bralid);
+ ret += ftrace_modify_code(rec->ip + 4, bralid);
+#endif /* USE_FTRACE_NOP */
+ return ret;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+ unsigned long ip = (unsigned long)(&ftrace_call);
+ unsigned int upper = (unsigned int)func;
+ unsigned int lower = (unsigned int)func;
+ int ret = 0;
+
+ /* create proper saving to ftrace_call poll */
+ upper = 0xb0000000 + (upper >> 16); /* imm func_upper */
+ lower = 0x32800000 + (lower & 0xFFFF); /* addik r20, r0, func_lower */
+
+ pr_debug("%s: func=0x%x, ip=0x%x, upper=0x%x, lower=0x%x\n",
+ __func__, (unsigned int)func, (unsigned int)ip, upper, lower);
+
+ /* save upper and lower code */
+ ret = ftrace_modify_code(ip, upper);
+ ret += ftrace_modify_code(ip + 4, lower);
+
+ /* We just need to replace the rtsd r15, 8 with NOP */
+ ret += ftrace_modify_code((unsigned long)&ftrace_caller,
+ MICROBLAZE_NOP);
+
+ return ret;
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+unsigned int old_jump; /* saving place for jump instruction */
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+ unsigned int ret;
+ unsigned long ip = (unsigned long)(&ftrace_call_graph);
+
+ old_jump = *(unsigned int *)ip; /* save jump over instruction */
+ ret = ftrace_modify_code(ip, MICROBLAZE_NOP);
+
+ pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump);
+ return ret;
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+ unsigned int ret;
+ unsigned long ip = (unsigned long)(&ftrace_call_graph);
+
+ ret = ftrace_modify_code(ip, old_jump);
+
+ pr_debug("%s\n", __func__);
+ return ret;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
new file mode 100644
index 0000000000..ec2fcb545e
--- /dev/null
+++ b/arch/microblaze/kernel/head.S
@@ -0,0 +1,374 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <linux/of_fdt.h> /* for OF_DT_HEADER */
+
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.section .data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+ .space PAGE_SIZE
+.global swapper_pg_dir
+swapper_pg_dir:
+ .space PAGE_SIZE
+
+.section .rodata
+.align 4
+endian_check:
+ .word 1
+
+ __HEAD
+ENTRY(_start)
+#if CONFIG_KERNEL_BASE_ADDR == 0
+ brai TOPHYS(real_start)
+ .org 0x100
+real_start:
+#endif
+
+ mts rmsr, r0
+/* Disable stack protection from bootloader */
+ mts rslr, r0
+ addi r8, r0, 0xFFFFFFFF
+ mts rshr, r8
+/*
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
+ */
+ mfs r1, rmsr
+ msrclr r8, 0 /* clear nothing - just read msr for test */
+ cmpu r8, r8, r1 /* r1 must contain msr reg content */
+
+/* r7 may point to an FDT, or there may be one linked in.
+ if it's in r7, we've got to save it away ASAP.
+ We ensure r7 points to a valid FDT, just in case the bootloader
+ is broken or non-existent */
+ beqi r7, no_fdt_arg /* NULL pointer? don't copy */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
+ /* Run time Big/Little endian platform */
+ /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+ lbui r11, r0, TOPHYS(endian_check)
+ beqid r11, big_endian /* DO NOT break delay stop dependency */
+ lw r11, r0, r7 /* Big endian load in delay slot */
+ lwr r11, r0, r7 /* Little endian load */
+big_endian:
+ rsubi r11, r11, OF_DT_HEADER /* Check FDT header */
+ beqi r11, _prepare_copy_fdt
+ or r7, r0, r0 /* clear R7 when not valid DTB */
+ bnei r11, no_fdt_arg /* No - get out of here */
+_prepare_copy_fdt:
+ or r11, r0, r0 /* incremment */
+ ori r4, r0, TOPHYS(_fdt_start)
+ ori r3, r0, (0x10000 - 4)
+_copy_fdt:
+ lw r12, r7, r11 /* r12 = r7 + r11 */
+ sw r12, r4, r11 /* addr[r4 + r11] = r12 */
+ addik r11, r11, 4 /* increment counting */
+ bgtid r3, _copy_fdt /* loop for all entries */
+ addik r3, r3, -4 /* descrement loop */
+no_fdt_arg:
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line directly to cmd_line placed in data section.
+ */
+ beqid r5, skip /* Skip if NULL pointer */
+ or r11, r0, r0 /* incremment */
+ ori r4, r0, cmd_line /* load address of command line */
+ tophys(r4,r4) /* convert to phys address */
+ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+ /* r2=r5+r11 - r5 contain pointer to command line */
+ lbu r2, r5, r11
+ beqid r2, skip /* Skip if no data */
+ sb r2, r4, r11 /* addr[r4+r11]= r2 */
+ addik r11, r11, 1 /* increment counting */
+ bgtid r3, _copy_command_line /* loop for all entries */
+ addik r3, r3, -1 /* decrement loop */
+ addik r5, r4, 0 /* add new space for command line */
+ tovirt(r5,r5)
+skip:
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+ or r11, r0, r0 /* incremment */
+ ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */
+ ori r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+ lw r7, r0, r11 /* r7 = r0 + r11 */
+ sw r7, r4, r11 /* addr[r4 + r11] = r7 */
+ addik r11, r11, 4 /* increment counting */
+ bgtid r3, _copy_bram /* loop for all entries */
+ addik r3, r3, -4 /* descrement loop */
+#endif
+ /* We have to turn on the MMU right away. */
+
+ /*
+ * Set up the initial MMU state so we can do the first level of
+ * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * virtual to physical.
+ */
+ nop
+ addik r3, r0, MICROBLAZE_TLB_SIZE -1 /* Invalidate all TLB entries */
+_invalidate:
+ mts rtlbx, r3
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ mts rtlblo, r0
+ bgtid r3, _invalidate /* loop for all entries */
+ addik r3, r3, -1
+ /* sync */
+
+ /* Setup the kernel PID */
+ mts rpid,r0 /* Load the kernel PID */
+ nop
+ bri 4
+
+ /*
+ * We should still be executing code at physical address area
+ * RAM_BASEADDR at this point. However, kernel code is at
+ * a virtual address. So, set up a TLB mapping to cover this once
+ * translation is enabled.
+ */
+
+ addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+ tophys(r4,r3) /* Load the kernel physical address */
+
+ /* start to do TLB calculation */
+ addik r12, r0, _end
+ rsub r12, r3, r12
+ addik r12, r12, CONFIG_LOWMEM_SIZE >> PTE_SHIFT /* that's the pad */
+
+ or r9, r0, r0 /* TLB0 = 0 */
+ or r10, r0, r0 /* TLB1 = 0 */
+
+ addik r11, r12, -0x1000000
+ bgei r11, GT16 /* size is greater than 16MB */
+ addik r11, r12, -0x0800000
+ bgei r11, GT8 /* size is greater than 8MB */
+ addik r11, r12, -0x0400000
+ bgei r11, GT4 /* size is greater than 4MB */
+ /* size is less than 4MB */
+ addik r11, r12, -0x0200000
+ bgei r11, GT2 /* size is greater than 2MB */
+ addik r9, r0, 0x0100000 /* TLB0 must be 1MB */
+ addik r11, r12, -0x0100000
+ bgei r11, GT1 /* size is greater than 1MB */
+ /* TLB1 is 0 which is setup above */
+ bri tlb_end
+GT4: /* r11 contains the rest - will be either 1 or 4 */
+ ori r9, r0, 0x400000 /* TLB0 is 4MB */
+ bri TLB1
+GT16: /* TLB0 is 16MB */
+ addik r9, r0, 0x1000000 /* means TLB0 is 16MB */
+TLB1:
+ /* must be used r2 because of subtract if failed */
+ addik r2, r11, -0x0400000
+ bgei r2, GT20 /* size is greater than 16MB */
+ /* size is >16MB and <20MB */
+ addik r11, r11, -0x0100000
+ bgei r11, GT17 /* size is greater than 17MB */
+ /* kernel is >16MB and < 17MB */
+GT1:
+ addik r10, r0, 0x0100000 /* means TLB1 is 1MB */
+ bri tlb_end
+GT2: /* TLB0 is 0 and TLB1 will be 4MB */
+GT17: /* TLB1 is 4MB - kernel size <20MB */
+ addik r10, r0, 0x0400000 /* means TLB1 is 4MB */
+ bri tlb_end
+GT8: /* TLB0 is still zero that's why I can use only TLB1 */
+GT20: /* TLB1 is 16MB - kernel size >20MB */
+ addik r10, r0, 0x1000000 /* means TLB1 is 16MB */
+tlb_end:
+
+ /*
+ * Configure and load two entries into TLB slots 0 and 1.
+ * In case we are pinning TLBs, these are reserved in by the
+ * other TLB functions. If not reserving, then it doesn't
+ * matter where they are loaded.
+ */
+ andi r4,r4,0xfffffc00 /* Mask off the real page number */
+ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
+
+ /*
+ * TLB0 is always used - check if is not zero (r9 stores TLB0 value)
+ * if is use TLB1 value and clear it (r10 stores TLB1 value)
+ */
+ bnei r9, tlb0_not_zero
+ add r9, r10, r0
+ add r10, r0, r0
+tlb0_not_zero:
+
+ /* look at the code below */
+ ori r30, r0, 0x200
+ andi r29, r9, 0x100000
+ bneid r29, 1f
+ addik r30, r30, 0x80
+ andi r29, r9, 0x400000
+ bneid r29, 1f
+ addik r30, r30, 0x80
+ andi r29, r9, 0x1000000
+ bneid r29, 1f
+ addik r30, r30, 0x80
+1:
+ andi r3,r3,0xfffffc00 /* Mask off the effective page number */
+ ori r3,r3,(TLB_VALID)
+ or r3, r3, r30
+
+ /* Load tlb_skip size value which is index to first unused TLB entry */
+ lwi r11, r0, TOPHYS(tlb_skip)
+ mts rtlbx,r11 /* TLB slow 0 */
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /* Increase tlb_skip size */
+ addik r11, r11, 1
+ swi r11, r0, TOPHYS(tlb_skip)
+
+ /* TLB1 can be zeroes that's why we not setup it */
+ beqi r10, jump_over2
+
+ /* look at the code below */
+ ori r30, r0, 0x200
+ andi r29, r10, 0x100000
+ bneid r29, 1f
+ addik r30, r30, 0x80
+ andi r29, r10, 0x400000
+ bneid r29, 1f
+ addik r30, r30, 0x80
+ andi r29, r10, 0x1000000
+ bneid r29, 1f
+ addik r30, r30, 0x80
+1:
+ addk r4, r4, r9 /* previous addr + TLB0 size */
+ addk r3, r3, r9
+
+ andi r3,r3,0xfffffc00 /* Mask off the effective page number */
+ ori r3,r3,(TLB_VALID)
+ or r3, r3, r30
+
+ lwi r11, r0, TOPHYS(tlb_skip)
+ mts rtlbx, r11 /* r11 is used from TLB0 */
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /* Increase tlb_skip size */
+ addik r11, r11, 1
+ swi r11, r0, TOPHYS(tlb_skip)
+
+jump_over2:
+ /*
+ * Load a TLB entry for LMB, since we need access to
+ * the exception vectors, using a 4k real==virtual mapping.
+ */
+ /* Use temporary TLB_ID for LMB - clear this temporary mapping later */
+ ori r11, r0, MICROBLAZE_LMB_TLB_ID
+ mts rtlbx,r11
+
+ ori r4,r0,(TLB_WR | TLB_EX)
+ ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+ mts rtlblo,r4 /* Load the data portion of the entry */
+ mts rtlbhi,r3 /* Load the tag portion of the entry */
+
+ /*
+ * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+ * caches ready to work.
+ */
+turn_on_mmu:
+ ori r15,r0,start_here
+ ori r4,r0,MSR_KERNEL_VMS
+ mts rmsr,r4
+ nop
+ rted r15,0 /* enables MMU */
+ nop
+
+start_here:
+
+ /* Initialize small data anchors */
+ addik r13, r0, _KERNEL_SDA_BASE_
+ addik r2, r0, _KERNEL_SDA2_BASE_
+
+ /* Initialize stack pointer */
+ addik r1, r0, init_thread_union + THREAD_SIZE - 4
+
+ /* Initialize r31 with current task address */
+ addik r31, r0, init_task
+
+ addik r11, r0, machine_early_init
+ brald r15, r11
+ nop
+
+ /*
+ * Initialize the MMU.
+ */
+ bralid r15, mmu_init
+ nop
+
+ /* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the MicroBlaze, all we invalidate the used TLB entries to clear
+ * the old 16M byte TLB mappings.
+ */
+ ori r15,r0,TOPHYS(kernel_load_context)
+ ori r4,r0,MSR_KERNEL
+ mts rmsr,r4
+ nop
+ bri 4
+ rted r15,0
+ nop
+
+ /* Load up the kernel context */
+kernel_load_context:
+ ori r5, r0, MICROBLAZE_LMB_TLB_ID
+ mts rtlbx,r5
+ nop
+ mts rtlbhi,r0
+ nop
+ addi r15, r0, machine_halt
+ ori r17, r0, start_kernel
+ ori r4, r0, MSR_KERNEL_VMS
+ mts rmsr, r4
+ nop
+ rted r17, 0 /* enable MMU and jump to start_kernel */
+ nop
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
new file mode 100644
index 0000000000..07ea23965f
--- /dev/null
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -0,0 +1,1094 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Exception handling for Microblaze
+ *
+ * Rewriten interrupt handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ *
+ * uClinux customisation (C) 2005 John Williams
+ *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ * Copyright (C) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (C) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (C) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (C) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (C) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ *
+ * Original code
+ * Copyright (C) 2004 Xilinx, Inc.
+ */
+
+/*
+ * Here are the handlers which don't require enabling translation
+ * and calling other kernel code thus we can keep their design very simple
+ * and do all processing in real mode. All what they need is a valid current
+ * (that is an issue for the CONFIG_REGISTER_TASK_PTR case)
+ * This handlers use r3,r4,r5,r6 and optionally r[current] to work therefore
+ * these registers are saved/restored
+ * The handlers which require translation are in entry.S --KAA
+ *
+ * Microblaze HW Exception Handler
+ * - Non self-modifying exception handler for the following exception conditions
+ * - Unalignment
+ * - Instruction bus error
+ * - Data bus error
+ * - Illegal instruction opcode
+ * - Divide-by-zero
+ *
+ * - Privileged instruction exception (MMU)
+ * - Data storage exception (MMU)
+ * - Instruction storage exception (MMU)
+ * - Data TLB miss exception (MMU)
+ * - Instruction TLB miss exception (MMU)
+ *
+ * Note we disable interrupts during exception handling, otherwise we will
+ * possibly get multiple re-entrancy if interrupt handles themselves cause
+ * exceptions. JW
+ */
+
+#include <asm/exceptions.h>
+#include <asm/unistd.h>
+#include <asm/page.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <linux/linkage.h>
+#include <linux/pgtable.h>
+
+#include <asm/mmu.h>
+#include <asm/signal.h>
+#include <asm/registers.h>
+#include <asm/asm-offsets.h>
+
+#undef DEBUG
+
+/* Helpful Macros */
+#define NUM_TO_REG(num) r ## num
+
+ #define RESTORE_STATE \
+ lwi r5, r1, 0; \
+ mts rmsr, r5; \
+ nop; \
+ lwi r3, r1, PT_R3; \
+ lwi r4, r1, PT_R4; \
+ lwi r5, r1, PT_R5; \
+ lwi r6, r1, PT_R6; \
+ lwi r11, r1, PT_R11; \
+ lwi r31, r1, PT_R31; \
+ lwi r1, r1, PT_R1;
+
+#define LWREG_NOP \
+ bri ex_handler_unhandled; \
+ nop;
+
+#define SWREG_NOP \
+ bri ex_handler_unhandled; \
+ nop;
+
+/* r3 is the source */
+#define R3_TO_LWREG_V(regnum) \
+ swi r3, r1, 4 * regnum; \
+ bri ex_handler_done;
+
+/* r3 is the source */
+#define R3_TO_LWREG(regnum) \
+ or NUM_TO_REG (regnum), r0, r3; \
+ bri ex_handler_done;
+
+/* r3 is the target */
+#define SWREG_TO_R3_V(regnum) \
+ lwi r3, r1, 4 * regnum; \
+ bri ex_sw_tail;
+
+/* r3 is the target */
+#define SWREG_TO_R3(regnum) \
+ or r3, r0, NUM_TO_REG (regnum); \
+ bri ex_sw_tail;
+
+ #define R3_TO_LWREG_VM_V(regnum) \
+ brid ex_lw_end_vm; \
+ swi r3, r7, 4 * regnum;
+
+ #define R3_TO_LWREG_VM(regnum) \
+ brid ex_lw_end_vm; \
+ or NUM_TO_REG (regnum), r0, r3;
+
+ #define SWREG_TO_R3_VM_V(regnum) \
+ brid ex_sw_tail_vm; \
+ lwi r3, r7, 4 * regnum;
+
+ #define SWREG_TO_R3_VM(regnum) \
+ brid ex_sw_tail_vm; \
+ or r3, r0, NUM_TO_REG (regnum);
+
+ /* Shift right instruction depending on available configuration */
+ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL == 0
+ /* Only the used shift constants defined here - add more if needed */
+ #define BSRLI2(rD, rA) \
+ srl rD, rA; /* << 1 */ \
+ srl rD, rD; /* << 2 */
+ #define BSRLI4(rD, rA) \
+ BSRLI2(rD, rA); \
+ BSRLI2(rD, rD)
+ #define BSRLI10(rD, rA) \
+ srl rD, rA; /* << 1 */ \
+ srl rD, rD; /* << 2 */ \
+ srl rD, rD; /* << 3 */ \
+ srl rD, rD; /* << 4 */ \
+ srl rD, rD; /* << 5 */ \
+ srl rD, rD; /* << 6 */ \
+ srl rD, rD; /* << 7 */ \
+ srl rD, rD; /* << 8 */ \
+ srl rD, rD; /* << 9 */ \
+ srl rD, rD /* << 10 */
+ #define BSRLI20(rD, rA) \
+ BSRLI10(rD, rA); \
+ BSRLI10(rD, rD)
+
+ .macro bsrli, rD, rA, IMM
+ .if (\IMM) == 2
+ BSRLI2(\rD, \rA)
+ .elseif (\IMM) == 10
+ BSRLI10(\rD, \rA)
+ .elseif (\IMM) == 12
+ BSRLI2(\rD, \rA)
+ BSRLI10(\rD, \rD)
+ .elseif (\IMM) == 14
+ BSRLI4(\rD, \rA)
+ BSRLI10(\rD, \rD)
+ .elseif (\IMM) == 20
+ BSRLI20(\rD, \rA)
+ .elseif (\IMM) == 24
+ BSRLI4(\rD, \rA)
+ BSRLI20(\rD, \rD)
+ .elseif (\IMM) == 28
+ BSRLI4(\rD, \rA)
+ BSRLI4(\rD, \rD)
+ BSRLI20(\rD, \rD)
+ .else
+ .error "BSRLI shift macros \IMM"
+ .endif
+ .endm
+ #endif
+
+
+.extern other_exception_handler /* Defined in exception.c */
+
+/*
+ * hw_exception_handler - Handler for exceptions
+ *
+ * Exception handler notes:
+ * - Handles all exceptions
+ * - Does not handle unaligned exceptions during load into r17, r1, r0.
+ * - Does not handle unaligned exceptions during store from r17 (cannot be
+ * done) and r1 (slows down common case)
+ *
+ * Relevant register structures
+ *
+ * EAR - |----|----|----|----|----|----|----|----|
+ * - < ## 32 bit faulting address ## >
+ *
+ * ESR - |----|----|----|----|----| - | - |-----|-----|
+ * - W S REG EXC
+ *
+ *
+ * STACK FRAME STRUCTURE (for CONFIG_MMU=n)
+ * ----------------------------------------
+ *
+ * +-------------+ + 0
+ * | MSR |
+ * +-------------+ + 4
+ * | r1 |
+ * | . |
+ * | . |
+ * | . |
+ * | . |
+ * | r18 |
+ * +-------------+ + 76
+ * | . |
+ * | . |
+ *
+ * MMU kernel uses the same 'pt_pool_space' pointed space
+ * which is used for storing register values - noMMu style was, that values were
+ * stored in stack but in case of failure you lost information about register.
+ * Currently you can see register value in memory in specific place.
+ * In compare to with previous solution the speed should be the same.
+ *
+ * MMU exception handler has different handling compare to no MMU kernel.
+ * Exception handler use jump table for directing of what happen. For MMU kernel
+ * is this approach better because MMU relate exception are handled by asm code
+ * in this file. In compare to with MMU expect of unaligned exception
+ * is everything handled by C code.
+ */
+
+/*
+ * every of these handlers is entered having R3/4/5/6/11/current saved on stack
+ * and clobbered so care should be taken to restore them if someone is going to
+ * return from exception
+ */
+
+/* wrappers to restore state before coming to entry.S */
+.section .data
+.align 4
+pt_pool_space:
+ .space PT_SIZE
+
+#ifdef DEBUG
+/* Create space for exception counting. */
+.section .data
+.global exception_debug_table
+.align 4
+exception_debug_table:
+ /* Look at exception vector table. There is 32 exceptions * word size */
+ .space (32 * 4)
+#endif /* DEBUG */
+
+.section .rodata
+.align 4
+_MB_HW_ExceptionVectorTable:
+/* 0 - Undefined */
+ .long TOPHYS(ex_handler_unhandled)
+/* 1 - Unaligned data access exception */
+ .long TOPHYS(handle_unaligned_ex)
+/* 2 - Illegal op-code exception */
+ .long TOPHYS(full_exception_trapw)
+/* 3 - Instruction bus error exception */
+ .long TOPHYS(full_exception_trapw)
+/* 4 - Data bus error exception */
+ .long TOPHYS(full_exception_trapw)
+/* 5 - Divide by zero exception */
+ .long TOPHYS(full_exception_trapw)
+/* 6 - Floating point unit exception */
+ .long TOPHYS(full_exception_trapw)
+/* 7 - Privileged instruction exception */
+ .long TOPHYS(full_exception_trapw)
+/* 8 - 15 - Undefined */
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+/* 16 - Data storage exception */
+ .long TOPHYS(handle_data_storage_exception)
+/* 17 - Instruction storage exception */
+ .long TOPHYS(handle_instruction_storage_exception)
+/* 18 - Data TLB miss exception */
+ .long TOPHYS(handle_data_tlb_miss_exception)
+/* 19 - Instruction TLB miss exception */
+ .long TOPHYS(handle_instruction_tlb_miss_exception)
+/* 20 - 31 - Undefined */
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+ .long TOPHYS(ex_handler_unhandled)
+
+.global _hw_exception_handler
+.section .text
+.align 4
+.ent _hw_exception_handler
+_hw_exception_handler:
+ swi r1, r0, TOPHYS(pt_pool_space + PT_R1); /* GET_SP */
+ /* Save date to kernel memory. Here is the problem
+ * when you came from user space */
+ ori r1, r0, TOPHYS(pt_pool_space);
+ swi r3, r1, PT_R3
+ swi r4, r1, PT_R4
+ swi r5, r1, PT_R5
+ swi r6, r1, PT_R6
+
+ swi r11, r1, PT_R11
+ swi r31, r1, PT_R31
+ lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
+
+ mfs r5, rmsr;
+ nop
+ swi r5, r1, 0;
+ mfs r4, resr
+ nop
+ mfs r3, rear;
+ nop
+
+ andi r5, r4, 0x1F; /* Extract ESR[EXC] */
+
+ /* Calculate exception vector offset = r5 << 2 */
+ addk r6, r5, r5; /* << 1 */
+ addk r6, r6, r6; /* << 2 */
+
+#ifdef DEBUG
+/* counting which exception happen */
+ lwi r5, r0, TOPHYS(exception_debug_table)
+ addi r5, r5, 1
+ swi r5, r0, TOPHYS(exception_debug_table)
+ lwi r5, r6, TOPHYS(exception_debug_table)
+ addi r5, r5, 1
+ swi r5, r6, TOPHYS(exception_debug_table)
+#endif
+/* end */
+ /* Load the HW Exception vector */
+ lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
+ bra r6
+
+full_exception_trapw:
+ RESTORE_STATE
+ bri full_exception_trap
+
+/* 0x01 - Unaligned data access exception
+ * This occurs when a word access is not aligned on a word boundary,
+ * or when a 16-bit access is not aligned on a 16-bit boundary.
+ * This handler perform the access, and returns, except for MMU when
+ * the unaligned address is last on a 4k page or the physical address is
+ * not found in the page table, in which case unaligned_data_trap is called.
+ */
+handle_unaligned_ex:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R4 = ESR
+ * R3 = EAR
+ */
+ andi r6, r4, 0x1000 /* Check ESR[DS] */
+ beqi r6, _no_delayslot /* Branch if ESR[DS] not set */
+ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
+ nop
+_no_delayslot:
+ /* jump to high level unaligned handler */
+ RESTORE_STATE;
+ bri unaligned_data_trap
+
+ andi r6, r4, 0x3E0; /* Mask and extract the register operand */
+ srl r6, r6; /* r6 >> 5 */
+ srl r6, r6;
+ srl r6, r6;
+ srl r6, r6;
+ srl r6, r6;
+ /* Store the register operand in a temporary location */
+ sbi r6, r0, TOPHYS(ex_reg_op);
+
+ andi r6, r4, 0x400; /* Extract ESR[S] */
+ bnei r6, ex_sw;
+ex_lw:
+ andi r6, r4, 0x800; /* Extract ESR[W] */
+ beqi r6, ex_lhw;
+ lbui r5, r3, 0; /* Exception address in r3 */
+ /* Load a word, byte-by-byte from destination address
+ and save it in tmp space */
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r5, r3, 1;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_1);
+ lbui r5, r3, 2;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_2);
+ lbui r5, r3, 3;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_3);
+ /* Get the destination register value into r4 */
+ lwi r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ bri ex_lw_tail;
+ex_lhw:
+ lbui r5, r3, 0; /* Exception address in r3 */
+ /* Load a half-word, byte-by-byte from destination
+ address and save it in tmp space */
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r5, r3, 1;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_1);
+ /* Get the destination register value into r4 */
+ lhui r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ex_lw_tail:
+ /* Get the destination register number into r5 */
+ lbui r5, r0, TOPHYS(ex_reg_op);
+ /* Form load_word jump table offset (lw_table + (8 * regnum)) */
+ addik r6, r0, TOPHYS(lw_table);
+ addk r5, r5, r5;
+ addk r5, r5, r5;
+ addk r5, r5, r5;
+ addk r5, r5, r6;
+ bra r5;
+ex_lw_end: /* Exception handling of load word, ends */
+ex_sw:
+ /* Get the destination register number into r5 */
+ lbui r5, r0, TOPHYS(ex_reg_op);
+ /* Form store_word jump table offset (sw_table + (8 * regnum)) */
+ addik r6, r0, TOPHYS(sw_table);
+ add r5, r5, r5;
+ add r5, r5, r5;
+ add r5, r5, r5;
+ add r5, r5, r6;
+ bra r5;
+ex_sw_tail:
+ mfs r6, resr;
+ nop
+ andi r6, r6, 0x800; /* Extract ESR[W] */
+ beqi r6, ex_shw;
+ /* Get the word - delay slot */
+ swi r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ /* Store the word, byte-by-byte into destination address */
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ sbi r4, r3, 0;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_1);
+ sbi r4, r3, 1;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_2);
+ sbi r4, r3, 2;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_3);
+ sbi r4, r3, 3;
+ bri ex_handler_done;
+
+ex_shw:
+ /* Store the lower half-word, byte-by-byte into destination address */
+ swi r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_2);
+ sbi r4, r3, 0;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_3);
+ sbi r4, r3, 1;
+ex_sw_end: /* Exception handling of store word, ends. */
+
+ex_handler_done:
+ RESTORE_STATE;
+ rted r17, 0
+ nop
+
+ /* Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). */
+
+ /* Exception vectors. */
+
+ /* 0x10 - Data Storage Exception
+ * This happens for just a few reasons. U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit. Otherwise, we call heavyweight functions to do the work.
+ */
+ handle_data_storage_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+ mfs r11, rpid
+ nop
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ ori r5, r0, CONFIG_KERNEL_START
+ cmpu r5, r3, r5
+ bgti r5, ex3
+ /* First, check if it was a zone fault (which means a user
+ * tried to access a kernel or read-protected page - always
+ * a SEGV). All other faults here must be stores, so no
+ * need to check ESR_S as well. */
+ andi r4, r4, ESR_DIZ /* ESR_Z - zone protection */
+ bnei r4, ex2
+
+ ori r4, r0, swapper_pg_dir
+ mts rpid, r0 /* TLB will have 0 TID */
+ nop
+ bri ex4
+
+ /* Get the PGD for the current thread. */
+ ex3:
+ /* First, check if it was a zone fault (which means a user
+ * tried to access a kernel or read-protected page - always
+ * a SEGV). All other faults here must be stores, so no
+ * need to check ESR_S as well. */
+ andi r4, r4, ESR_DIZ /* ESR_Z */
+ bnei r4, ex2
+ /* get current task address */
+ addi r4 ,CURRENT_TASK, TOPHYS(0);
+ lwi r4, r4, TASK_THREAD+PGDIR
+ ex4:
+ tophys(r4,r4)
+ /* Create L1 (pgdir/pmd) address */
+ bsrli r5, r3, PGDIR_SHIFT - 2
+ andi r5, r5, PAGE_SIZE - 4
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+ or r4, r4, r5
+ lwi r4, r4, 0 /* Get L1 entry */
+ andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */
+ beqi r5, ex2 /* Bail if no table */
+
+ tophys(r5,r5)
+ bsrli r6, r3, PTE_SHIFT /* Compute PTE address */
+ andi r6, r6, PAGE_SIZE - 4
+ or r5, r5, r6
+ lwi r4, r5, 0 /* Get Linux PTE */
+
+ andi r6, r4, _PAGE_RW /* Is it writeable? */
+ beqi r6, ex2 /* Bail if not */
+
+ /* Update 'changed' */
+ ori r4, r4, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ swi r4, r5, 0 /* Update Linux page table */
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+/* Ignore memory coherent, just LSB on ZSEL is used + EX/WR */
+ andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \
+ TLB_ZSEL(1) | TLB_ATTR_MASK
+ ori r4, r4, _PAGE_HWEXEC /* make it executable */
+
+ /* find the TLB index that caused the fault. It has to be here*/
+ mts rtlbsx, r3
+ nop
+ mfs r5, rtlbx /* DEBUG: TBD */
+ nop
+ mts rtlblo, r4 /* Load TLB LO */
+ nop
+ /* Will sync shadow TLBs */
+
+ /* Done...restore registers and get out of here. */
+ mts rpid, r11
+ nop
+ bri 4
+
+ RESTORE_STATE;
+ rted r17, 0
+ nop
+ ex2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out. */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ bri page_fault_data_trap
+
+
+ /* 0x11 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages. */
+ handle_instruction_storage_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+
+ RESTORE_STATE;
+ bri page_fault_instr_trap
+
+ /* 0x12 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it. The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+ handle_data_tlb_miss_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = EAR, R4 = ESR
+ */
+ mfs r11, rpid
+ nop
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables. */
+ ori r6, r0, CONFIG_KERNEL_START
+ cmpu r4, r3, r6
+ bgti r4, ex5
+ ori r4, r0, swapper_pg_dir
+ mts rpid, r0 /* TLB will have 0 TID */
+ nop
+ bri ex6
+
+ /* Get the PGD for the current thread. */
+ ex5:
+ /* get current task address */
+ addi r4 ,CURRENT_TASK, TOPHYS(0);
+ lwi r4, r4, TASK_THREAD+PGDIR
+ ex6:
+ tophys(r4,r4)
+ /* Create L1 (pgdir/pmd) address */
+ bsrli r5, r3, PGDIR_SHIFT - 2
+ andi r5, r5, PAGE_SIZE - 4
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+ or r4, r4, r5
+ lwi r4, r4, 0 /* Get L1 entry */
+ andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */
+ beqi r5, ex7 /* Bail if no table */
+
+ tophys(r5,r5)
+ bsrli r6, r3, PTE_SHIFT /* Compute PTE address */
+ andi r6, r6, PAGE_SIZE - 4
+ or r5, r5, r6
+ lwi r4, r5, 0 /* Get Linux PTE */
+
+ andi r6, r4, _PAGE_PRESENT
+ beqi r6, ex7
+
+ ori r4, r4, _PAGE_ACCESSED
+ swi r4, r5, 0
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ brid finish_tlb_load
+ andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \
+ TLB_ZSEL(1) | TLB_ATTR_MASK
+ ex7:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ bri page_fault_data_trap
+
+ /* 0x13 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from
+ * different registers and bailout to a different point.
+ */
+ handle_instruction_tlb_miss_exception:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ */
+ mfs r11, rpid
+ nop
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ ori r4, r0, CONFIG_KERNEL_START
+ cmpu r4, r3, r4
+ bgti r4, ex8
+ ori r4, r0, swapper_pg_dir
+ mts rpid, r0 /* TLB will have 0 TID */
+ nop
+ bri ex9
+
+ /* Get the PGD for the current thread. */
+ ex8:
+ /* get current task address */
+ addi r4 ,CURRENT_TASK, TOPHYS(0);
+ lwi r4, r4, TASK_THREAD+PGDIR
+ ex9:
+ tophys(r4,r4)
+ /* Create L1 (pgdir/pmd) address */
+ bsrli r5, r3, PGDIR_SHIFT - 2
+ andi r5, r5, PAGE_SIZE - 4
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+ or r4, r4, r5
+ lwi r4, r4, 0 /* Get L1 entry */
+ andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */
+ beqi r5, ex10 /* Bail if no table */
+
+ tophys(r5,r5)
+ bsrli r6, r3, PTE_SHIFT /* Compute PTE address */
+ andi r6, r6, PAGE_SIZE - 4
+ or r5, r5, r6
+ lwi r4, r5, 0 /* Get Linux PTE */
+
+ andi r6, r4, _PAGE_PRESENT
+ beqi r6, ex10
+
+ ori r4, r4, _PAGE_ACCESSED
+ swi r4, r5, 0
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ brid finish_tlb_load
+ andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \
+ TLB_ZSEL(1) | TLB_ATTR_MASK
+ ex10:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ bri page_fault_instr_trap
+
+/* Both the instruction and data TLB miss get to this point to load the TLB.
+ * r3 - EA of fault
+ * r4 - TLB LO (info from Linux PTE)
+ * r5, r6 - available to use
+ * PID - loaded with proper value when we get here
+ * Upon exit, we reload everything and RFI.
+ * A common place to load the TLB.
+ */
+.section .data
+.align 4
+.global tlb_skip
+ tlb_skip:
+ .long MICROBLAZE_TLB_SKIP
+ tlb_index:
+ /* MS: storing last used tlb index */
+ .long MICROBLAZE_TLB_SIZE/2
+.previous
+ finish_tlb_load:
+ /* MS: load the last used TLB index. */
+ lwi r5, r0, TOPHYS(tlb_index)
+ addik r5, r5, 1 /* MS: inc tlb_index -> use next one */
+
+/* MS: FIXME this is potential fault, because this is mask not count */
+ andi r5, r5, MICROBLAZE_TLB_SIZE - 1
+ ori r6, r0, 1
+ cmp r31, r5, r6
+ blti r31, ex12
+ lwi r5, r0, TOPHYS(tlb_skip)
+ ex12:
+ /* MS: save back current TLB index */
+ swi r5, r0, TOPHYS(tlb_index)
+
+ ori r4, r4, _PAGE_HWEXEC /* make it executable */
+ mts rtlbx, r5 /* MS: save current TLB */
+ nop
+ mts rtlblo, r4 /* MS: save to TLB LO */
+ nop
+
+ /* Create EPN. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0, and ensure
+ * bits 20 and 21 are zero.
+ */
+ andi r3, r3, PAGE_MASK
+ ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_4K)
+ mts rtlbhi, r3 /* Load TLB HI */
+ nop
+
+ /* Done...restore registers and get out of here. */
+ mts rpid, r11
+ nop
+ bri 4
+ RESTORE_STATE;
+ rted r17, 0
+ nop
+
+ /* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The MicroBlaze processor may have an FPU, so this should not just
+ * return: TBD.
+ */
+ .globl giveup_fpu;
+ .align 4;
+ giveup_fpu:
+ bralid r15,0 /* TBD */
+ nop
+
+ /* At present, this routine just hangs. - extern void abort(void) */
+ .globl abort;
+ .align 4;
+ abort:
+ br r0
+
+ .globl set_context;
+ .align 4;
+ set_context:
+ mts rpid, r5 /* Shadow TLBs are automatically */
+ nop
+ bri 4 /* flushed by changing PID */
+ rtsd r15,8
+ nop
+
+.end _hw_exception_handler
+
+/* Unaligned data access exception last on a 4k page for MMU.
+ * When this is called, we are in virtual mode with exceptions enabled
+ * and registers 1-13,15,17,18 saved.
+ *
+ * R3 = ESR
+ * R4 = EAR
+ * R7 = pointer to saved registers (struct pt_regs *regs)
+ *
+ * This handler perform the access, and returns via ret_from_exc.
+ */
+.global _unaligned_data_exception
+.ent _unaligned_data_exception
+_unaligned_data_exception:
+ andi r8, r3, 0x3E0; /* Mask and extract the register operand */
+ bsrli r8, r8, 2; /* r8 >> 2 = register operand * 8 */
+ andi r6, r3, 0x400; /* Extract ESR[S] */
+ bneid r6, ex_sw_vm;
+ andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */
+ex_lw_vm:
+ beqid r6, ex_lhw_vm;
+load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */
+/* Load a word, byte-by-byte from destination address and save it in tmp space*/
+ addik r6, r0, ex_tmp_data_loc_0;
+ sbi r5, r6, 0;
+load2: lbui r5, r4, 1;
+ sbi r5, r6, 1;
+load3: lbui r5, r4, 2;
+ sbi r5, r6, 2;
+load4: lbui r5, r4, 3;
+ sbi r5, r6, 3;
+ brid ex_lw_tail_vm;
+/* Get the destination register value into r3 - delay slot */
+ lwi r3, r6, 0;
+ex_lhw_vm:
+ /* Load a half-word, byte-by-byte from destination address and
+ * save it in tmp space */
+ addik r6, r0, ex_tmp_data_loc_0;
+ sbi r5, r6, 0;
+load5: lbui r5, r4, 1;
+ sbi r5, r6, 1;
+ lhui r3, r6, 0; /* Get the destination register value into r3 */
+ex_lw_tail_vm:
+ /* Form load_word jump table offset (lw_table_vm + (8 * regnum)) */
+ addik r5, r8, lw_table_vm;
+ bra r5;
+ex_lw_end_vm: /* Exception handling of load word, ends */
+ brai ret_from_exc;
+ex_sw_vm:
+/* Form store_word jump table offset (sw_table_vm + (8 * regnum)) */
+ addik r5, r8, sw_table_vm;
+ bra r5;
+ex_sw_tail_vm:
+ addik r5, r0, ex_tmp_data_loc_0;
+ beqid r6, ex_shw_vm;
+ swi r3, r5, 0; /* Get the word - delay slot */
+ /* Store the word, byte-by-byte into destination address */
+ lbui r3, r5, 0;
+store1: sbi r3, r4, 0;
+ lbui r3, r5, 1;
+store2: sbi r3, r4, 1;
+ lbui r3, r5, 2;
+store3: sbi r3, r4, 2;
+ lbui r3, r5, 3;
+ brid ret_from_exc;
+store4: sbi r3, r4, 3; /* Delay slot */
+ex_shw_vm:
+ /* Store the lower half-word, byte-by-byte into destination address */
+#ifdef __MICROBLAZEEL__
+ lbui r3, r5, 0;
+store5: sbi r3, r4, 0;
+ lbui r3, r5, 1;
+ brid ret_from_exc;
+store6: sbi r3, r4, 1; /* Delay slot */
+#else
+ lbui r3, r5, 2;
+store5: sbi r3, r4, 0;
+ lbui r3, r5, 3;
+ brid ret_from_exc;
+store6: sbi r3, r4, 1; /* Delay slot */
+#endif
+
+ex_sw_end_vm: /* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+ ori r5, r7, 0 /* setup pointer to pt_regs */
+ lwi r6, r7, PT_PC; /* faulting address is one instruction above */
+ addik r6, r6, -4 /* for finding proper fixup */
+ swi r6, r7, PT_PC; /* a save back it to PT_PC */
+ addik r7, r0, SIGSEGV
+ /* call bad_page_fault for finding aligned fixup, fixup address is saved
+ * in PT_PC which is used as return address from exception */
+ addik r15, r0, ret_from_exc-8 /* setup return address */
+ brid bad_page_fault
+ nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+ .word load1,ex_unaligned_fixup;
+ .word load2,ex_unaligned_fixup;
+ .word load3,ex_unaligned_fixup;
+ .word load4,ex_unaligned_fixup;
+ .word load5,ex_unaligned_fixup;
+ .word store1,ex_unaligned_fixup;
+ .word store2,ex_unaligned_fixup;
+ .word store3,ex_unaligned_fixup;
+ .word store4,ex_unaligned_fixup;
+ .word store5,ex_unaligned_fixup;
+ .word store6,ex_unaligned_fixup;
+.previous;
+.end _unaligned_data_exception
+
+.global ex_handler_unhandled
+ex_handler_unhandled:
+/* FIXME add handle function for unhandled exception - dump register */
+ bri 0
+
+/*
+ * hw_exception_handler Jump Table
+ * - Contains code snippets for each register that caused the unalign exception
+ * - Hence exception handler is NOT self-modifying
+ * - Separate table for load exceptions and store exceptions.
+ * - Each table is of size: (8 * 32) = 256 bytes
+ */
+
+.section .text
+.align 4
+lw_table:
+lw_r0: R3_TO_LWREG (0);
+lw_r1: LWREG_NOP;
+lw_r2: R3_TO_LWREG (2);
+lw_r3: R3_TO_LWREG_V (3);
+lw_r4: R3_TO_LWREG_V (4);
+lw_r5: R3_TO_LWREG_V (5);
+lw_r6: R3_TO_LWREG_V (6);
+lw_r7: R3_TO_LWREG (7);
+lw_r8: R3_TO_LWREG (8);
+lw_r9: R3_TO_LWREG (9);
+lw_r10: R3_TO_LWREG (10);
+lw_r11: R3_TO_LWREG (11);
+lw_r12: R3_TO_LWREG (12);
+lw_r13: R3_TO_LWREG (13);
+lw_r14: R3_TO_LWREG (14);
+lw_r15: R3_TO_LWREG (15);
+lw_r16: R3_TO_LWREG (16);
+lw_r17: LWREG_NOP;
+lw_r18: R3_TO_LWREG (18);
+lw_r19: R3_TO_LWREG (19);
+lw_r20: R3_TO_LWREG (20);
+lw_r21: R3_TO_LWREG (21);
+lw_r22: R3_TO_LWREG (22);
+lw_r23: R3_TO_LWREG (23);
+lw_r24: R3_TO_LWREG (24);
+lw_r25: R3_TO_LWREG (25);
+lw_r26: R3_TO_LWREG (26);
+lw_r27: R3_TO_LWREG (27);
+lw_r28: R3_TO_LWREG (28);
+lw_r29: R3_TO_LWREG (29);
+lw_r30: R3_TO_LWREG (30);
+lw_r31: R3_TO_LWREG_V (31);
+
+sw_table:
+sw_r0: SWREG_TO_R3 (0);
+sw_r1: SWREG_NOP;
+sw_r2: SWREG_TO_R3 (2);
+sw_r3: SWREG_TO_R3_V (3);
+sw_r4: SWREG_TO_R3_V (4);
+sw_r5: SWREG_TO_R3_V (5);
+sw_r6: SWREG_TO_R3_V (6);
+sw_r7: SWREG_TO_R3 (7);
+sw_r8: SWREG_TO_R3 (8);
+sw_r9: SWREG_TO_R3 (9);
+sw_r10: SWREG_TO_R3 (10);
+sw_r11: SWREG_TO_R3 (11);
+sw_r12: SWREG_TO_R3 (12);
+sw_r13: SWREG_TO_R3 (13);
+sw_r14: SWREG_TO_R3 (14);
+sw_r15: SWREG_TO_R3 (15);
+sw_r16: SWREG_TO_R3 (16);
+sw_r17: SWREG_NOP;
+sw_r18: SWREG_TO_R3 (18);
+sw_r19: SWREG_TO_R3 (19);
+sw_r20: SWREG_TO_R3 (20);
+sw_r21: SWREG_TO_R3 (21);
+sw_r22: SWREG_TO_R3 (22);
+sw_r23: SWREG_TO_R3 (23);
+sw_r24: SWREG_TO_R3 (24);
+sw_r25: SWREG_TO_R3 (25);
+sw_r26: SWREG_TO_R3 (26);
+sw_r27: SWREG_TO_R3 (27);
+sw_r28: SWREG_TO_R3 (28);
+sw_r29: SWREG_TO_R3 (29);
+sw_r30: SWREG_TO_R3 (30);
+sw_r31: SWREG_TO_R3_V (31);
+
+lw_table_vm:
+lw_r0_vm: R3_TO_LWREG_VM (0);
+lw_r1_vm: R3_TO_LWREG_VM_V (1);
+lw_r2_vm: R3_TO_LWREG_VM_V (2);
+lw_r3_vm: R3_TO_LWREG_VM_V (3);
+lw_r4_vm: R3_TO_LWREG_VM_V (4);
+lw_r5_vm: R3_TO_LWREG_VM_V (5);
+lw_r6_vm: R3_TO_LWREG_VM_V (6);
+lw_r7_vm: R3_TO_LWREG_VM_V (7);
+lw_r8_vm: R3_TO_LWREG_VM_V (8);
+lw_r9_vm: R3_TO_LWREG_VM_V (9);
+lw_r10_vm: R3_TO_LWREG_VM_V (10);
+lw_r11_vm: R3_TO_LWREG_VM_V (11);
+lw_r12_vm: R3_TO_LWREG_VM_V (12);
+lw_r13_vm: R3_TO_LWREG_VM_V (13);
+lw_r14_vm: R3_TO_LWREG_VM_V (14);
+lw_r15_vm: R3_TO_LWREG_VM_V (15);
+lw_r16_vm: R3_TO_LWREG_VM_V (16);
+lw_r17_vm: R3_TO_LWREG_VM_V (17);
+lw_r18_vm: R3_TO_LWREG_VM_V (18);
+lw_r19_vm: R3_TO_LWREG_VM_V (19);
+lw_r20_vm: R3_TO_LWREG_VM_V (20);
+lw_r21_vm: R3_TO_LWREG_VM_V (21);
+lw_r22_vm: R3_TO_LWREG_VM_V (22);
+lw_r23_vm: R3_TO_LWREG_VM_V (23);
+lw_r24_vm: R3_TO_LWREG_VM_V (24);
+lw_r25_vm: R3_TO_LWREG_VM_V (25);
+lw_r26_vm: R3_TO_LWREG_VM_V (26);
+lw_r27_vm: R3_TO_LWREG_VM_V (27);
+lw_r28_vm: R3_TO_LWREG_VM_V (28);
+lw_r29_vm: R3_TO_LWREG_VM_V (29);
+lw_r30_vm: R3_TO_LWREG_VM_V (30);
+lw_r31_vm: R3_TO_LWREG_VM_V (31);
+
+sw_table_vm:
+sw_r0_vm: SWREG_TO_R3_VM (0);
+sw_r1_vm: SWREG_TO_R3_VM_V (1);
+sw_r2_vm: SWREG_TO_R3_VM_V (2);
+sw_r3_vm: SWREG_TO_R3_VM_V (3);
+sw_r4_vm: SWREG_TO_R3_VM_V (4);
+sw_r5_vm: SWREG_TO_R3_VM_V (5);
+sw_r6_vm: SWREG_TO_R3_VM_V (6);
+sw_r7_vm: SWREG_TO_R3_VM_V (7);
+sw_r8_vm: SWREG_TO_R3_VM_V (8);
+sw_r9_vm: SWREG_TO_R3_VM_V (9);
+sw_r10_vm: SWREG_TO_R3_VM_V (10);
+sw_r11_vm: SWREG_TO_R3_VM_V (11);
+sw_r12_vm: SWREG_TO_R3_VM_V (12);
+sw_r13_vm: SWREG_TO_R3_VM_V (13);
+sw_r14_vm: SWREG_TO_R3_VM_V (14);
+sw_r15_vm: SWREG_TO_R3_VM_V (15);
+sw_r16_vm: SWREG_TO_R3_VM_V (16);
+sw_r17_vm: SWREG_TO_R3_VM_V (17);
+sw_r18_vm: SWREG_TO_R3_VM_V (18);
+sw_r19_vm: SWREG_TO_R3_VM_V (19);
+sw_r20_vm: SWREG_TO_R3_VM_V (20);
+sw_r21_vm: SWREG_TO_R3_VM_V (21);
+sw_r22_vm: SWREG_TO_R3_VM_V (22);
+sw_r23_vm: SWREG_TO_R3_VM_V (23);
+sw_r24_vm: SWREG_TO_R3_VM_V (24);
+sw_r25_vm: SWREG_TO_R3_VM_V (25);
+sw_r26_vm: SWREG_TO_R3_VM_V (26);
+sw_r27_vm: SWREG_TO_R3_VM_V (27);
+sw_r28_vm: SWREG_TO_R3_VM_V (28);
+sw_r29_vm: SWREG_TO_R3_VM_V (29);
+sw_r30_vm: SWREG_TO_R3_VM_V (30);
+sw_r31_vm: SWREG_TO_R3_VM_V (31);
+
+/* Temporary data structures used in the handler */
+.section .data
+.align 4
+ex_tmp_data_loc_0:
+ .byte 0
+ex_tmp_data_loc_1:
+ .byte 0
+ex_tmp_data_loc_2:
+ .byte 0
+ex_tmp_data_loc_3:
+ .byte 0
+ex_reg_op:
+ .byte 0
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
new file mode 100644
index 0000000000..1f8cb4c4f7
--- /dev/null
+++ b/arch/microblaze/kernel/irq.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
+#include <linux/irqflags.h>
+#include <linux/seq_file.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+
+void __irq_entry do_IRQ(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ trace_hardirqs_off();
+
+ irq_enter();
+ handle_arch_irq(regs);
+ irq_exit();
+ set_irq_regs(old_regs);
+ trace_hardirqs_on();
+}
+
+void __init init_IRQ(void)
+{
+ /* process the entire interrupt tree in one go */
+ irqchip_init();
+}
diff --git a/arch/microblaze/kernel/kgdb.c b/arch/microblaze/kernel/kgdb.c
new file mode 100644
index 0000000000..df4b9d0112
--- /dev/null
+++ b/arch/microblaze/kernel/kgdb.c
@@ -0,0 +1,152 @@
+/*
+ * Microblaze KGDB support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/asm-offsets.h>
+#include <asm/kgdb.h>
+#include <asm/pvr.h>
+
+#define GDB_REG 0
+#define GDB_PC 32
+#define GDB_MSR 33
+#define GDB_EAR 34
+#define GDB_ESR 35
+#define GDB_FSR 36
+#define GDB_BTR 37
+#define GDB_PVR 38
+#define GDB_REDR 50
+#define GDB_RPID 51
+#define GDB_RZPR 52
+#define GDB_RTLBX 53
+#define GDB_RTLBSX 54 /* mfs can't read it */
+#define GDB_RTLBLO 55
+#define GDB_RTLBHI 56
+
+/* keep pvr separately because it is unchangeable */
+static struct pvr_s pvr;
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ unsigned int i;
+ unsigned long *pt_regb = (unsigned long *)regs;
+ int temp;
+
+ /* registers r0 - r31, pc, msr, ear, esr, fsr + do not save pt_mode */
+ for (i = 0; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+ gdb_regs[i] = pt_regb[i];
+
+ /* Branch target register can't be changed */
+ __asm__ __volatile__ ("mfs %0, rbtr;" : "=r"(temp) : );
+ gdb_regs[GDB_BTR] = temp;
+
+ /* pvr part - we have 11 pvr regs */
+ for (i = 0; i < sizeof(struct pvr_s)/4; i++)
+ gdb_regs[GDB_PVR + i] = pvr.pvr[i];
+
+ /* read special registers - can't be changed */
+ __asm__ __volatile__ ("mfs %0, redr;" : "=r"(temp) : );
+ gdb_regs[GDB_REDR] = temp;
+ __asm__ __volatile__ ("mfs %0, rpid;" : "=r"(temp) : );
+ gdb_regs[GDB_RPID] = temp;
+ __asm__ __volatile__ ("mfs %0, rzpr;" : "=r"(temp) : );
+ gdb_regs[GDB_RZPR] = temp;
+ __asm__ __volatile__ ("mfs %0, rtlbx;" : "=r"(temp) : );
+ gdb_regs[GDB_RTLBX] = temp;
+ __asm__ __volatile__ ("mfs %0, rtlblo;" : "=r"(temp) : );
+ gdb_regs[GDB_RTLBLO] = temp;
+ __asm__ __volatile__ ("mfs %0, rtlbhi;" : "=r"(temp) : );
+ gdb_regs[GDB_RTLBHI] = temp;
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ unsigned int i;
+ unsigned long *pt_regb = (unsigned long *)regs;
+
+ /* pt_regs and gdb_regs have the same 37 values.
+ * The rest of gdb_regs are unused and can't be changed.
+ * r0 register value can't be changed too. */
+ for (i = 1; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+ pt_regb[i] = gdb_regs[i];
+}
+
+asmlinkage void microblaze_kgdb_break(struct pt_regs *regs)
+{
+ if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0)
+ return;
+
+ /* Jump over the first arch_kgdb_breakpoint which is barrier to
+ * get kgdb work. The same solution is used for powerpc */
+ if (*(u32 *) (regs->pc) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+ regs->pc += BREAK_INSTR_SIZE;
+}
+
+/* untested */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ unsigned int i;
+ unsigned long *pt_regb = (unsigned long *)(p->thread.regs);
+
+ /* registers r0 - r31, pc, msr, ear, esr, fsr + do not save pt_mode */
+ for (i = 0; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+ gdb_regs[i] = pt_regb[i];
+
+ /* pvr part - we have 11 pvr regs */
+ for (i = 0; i < sizeof(struct pvr_s)/4; i++)
+ gdb_regs[GDB_PVR + i] = pvr.pvr[i];
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+ regs->pc = ip;
+}
+
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer, char *remcom_out_buffer,
+ struct pt_regs *regs)
+{
+ char *ptr;
+ unsigned long address;
+
+ switch (remcom_in_buffer[0]) {
+ case 'c':
+ /* handle the optional parameter */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &address))
+ regs->pc = address;
+
+ return 0;
+ }
+ return -1; /* this means that we do not want to exit from the handler */
+}
+
+int kgdb_arch_init(void)
+{
+ get_pvr(&pvr); /* Fill PVR structure */
+ return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+ /* Nothing to do */
+}
+
+/*
+ * Global data
+ */
+const struct kgdb_arch arch_kgdb_ops = {
+#ifdef __MICROBLAZEEL__
+ .gdb_bpt_instr = {0x18, 0x00, 0x0c, 0xba}, /* brki r16, 0x18 */
+#else
+ .gdb_bpt_instr = {0xba, 0x0c, 0x00, 0x18}, /* brki r16, 0x18 */
+#endif
+};
diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S
new file mode 100644
index 0000000000..fed9da5de8
--- /dev/null
+++ b/arch/microblaze/kernel/mcount.S
@@ -0,0 +1,165 @@
+/*
+ * Low-level ftrace handling
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+
+#define NOALIGN_ENTRY(name) .globl name; name:
+
+/* FIXME MS: I think that I don't need to save all regs */
+#define SAVE_REGS \
+ addik r1, r1, -120; \
+ swi r2, r1, 4; \
+ swi r3, r1, 8; \
+ swi r4, r1, 12; \
+ swi r5, r1, 116; \
+ swi r6, r1, 16; \
+ swi r7, r1, 20; \
+ swi r8, r1, 24; \
+ swi r9, r1, 28; \
+ swi r10, r1, 32; \
+ swi r11, r1, 36; \
+ swi r12, r1, 40; \
+ swi r13, r1, 44; \
+ swi r14, r1, 48; \
+ swi r16, r1, 52; \
+ swi r17, r1, 56; \
+ swi r18, r1, 60; \
+ swi r19, r1, 64; \
+ swi r20, r1, 68; \
+ swi r21, r1, 72; \
+ swi r22, r1, 76; \
+ swi r23, r1, 80; \
+ swi r24, r1, 84; \
+ swi r25, r1, 88; \
+ swi r26, r1, 92; \
+ swi r27, r1, 96; \
+ swi r28, r1, 100; \
+ swi r29, r1, 104; \
+ swi r30, r1, 108; \
+ swi r31, r1, 112;
+
+#define RESTORE_REGS \
+ lwi r2, r1, 4; \
+ lwi r3, r1, 8; \
+ lwi r4, r1, 12; \
+ lwi r5, r1, 116; \
+ lwi r6, r1, 16; \
+ lwi r7, r1, 20; \
+ lwi r8, r1, 24; \
+ lwi r9, r1, 28; \
+ lwi r10, r1, 32; \
+ lwi r11, r1, 36; \
+ lwi r12, r1, 40; \
+ lwi r13, r1, 44; \
+ lwi r14, r1, 48; \
+ lwi r16, r1, 52; \
+ lwi r17, r1, 56; \
+ lwi r18, r1, 60; \
+ lwi r19, r1, 64; \
+ lwi r20, r1, 68; \
+ lwi r21, r1, 72; \
+ lwi r22, r1, 76; \
+ lwi r23, r1, 80; \
+ lwi r24, r1, 84; \
+ lwi r25, r1, 88; \
+ lwi r26, r1, 92; \
+ lwi r27, r1, 96; \
+ lwi r28, r1, 100; \
+ lwi r29, r1, 104; \
+ lwi r30, r1, 108; \
+ lwi r31, r1, 112; \
+ addik r1, r1, 120;
+
+ENTRY(ftrace_stub)
+ rtsd r15, 8;
+ nop;
+
+ENTRY(_mcount)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller)
+ /* MS: It is just barrier which is removed from C code */
+ rtsd r15, 8
+ nop
+#endif /* CONFIG_DYNAMIC_FTRACE */
+ SAVE_REGS
+ swi r15, r1, 0;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifndef CONFIG_DYNAMIC_FTRACE
+ lwi r5, r0, ftrace_graph_return;
+ addik r6, r0, ftrace_stub; /* asm implementation */
+ cmpu r5, r5, r6; /* ftrace_graph_return != ftrace_stub */
+ beqid r5, end_graph_tracer;
+ nop;
+
+ lwi r6, r0, ftrace_graph_entry;
+ addik r5, r0, ftrace_graph_entry_stub; /* implemented in C */
+ cmpu r5, r5, r6; /* ftrace_graph_entry != ftrace_graph_entry_stub */
+ beqid r5, end_graph_tracer;
+ nop;
+#else /* CONFIG_DYNAMIC_FTRACE */
+NOALIGN_ENTRY(ftrace_call_graph)
+ /* MS: jump over graph function - replaced from C code */
+ bri end_graph_tracer
+#endif /* CONFIG_DYNAMIC_FTRACE */
+ addik r5, r1, 120; /* MS: load parent addr */
+ addik r6, r15, 0; /* MS: load current function addr */
+ bralid r15, prepare_ftrace_return;
+ nop;
+ /* MS: graph was taken that's why - can jump over function trace */
+ brid end;
+ nop;
+end_graph_tracer:
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#ifndef CONFIG_DYNAMIC_FTRACE
+ /* MS: test function trace if is taken or not */
+ lwi r20, r0, ftrace_trace_function;
+ addik r6, r0, ftrace_stub;
+ cmpu r5, r20, r6; /* ftrace_trace_function != ftrace_stub */
+ beqid r5, end; /* MS: not taken -> jump over */
+ nop;
+#else /* CONFIG_DYNAMIC_FTRACE */
+NOALIGN_ENTRY(ftrace_call)
+/* instruction for setup imm FUNC_part1, addik r20, r0, FUNC_part2 */
+ nop
+ nop
+#endif /* CONFIG_DYNAMIC_FTRACE */
+/* static normal trace */
+ lwi r6, r1, 120; /* MS: load parent addr */
+ addik r5, r15, -4; /* MS: load current function addr */
+ /* MS: here is dependency on previous code */
+ brald r15, r20; /* MS: jump to ftrace handler */
+ nop;
+end:
+ lwi r15, r1, 0;
+ RESTORE_REGS
+
+ rtsd r15, 8; /* MS: jump back */
+ nop;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(return_to_handler)
+ nop; /* MS: just barrier for rtsd r15, 8 */
+ nop;
+ SAVE_REGS
+ swi r15, r1, 0;
+
+ /* MS: find out returning address */
+ bralid r15, ftrace_return_to_handler;
+ nop;
+
+ /* MS: return value from ftrace_return_to_handler is my returning addr
+ * must be before restore regs because I have to restore r3 content */
+ addik r15, r3, 0;
+ RESTORE_REGS
+
+ rtsd r15, 8; /* MS: jump back */
+ nop;
+#endif /* CONFIG_FUNCTION_TRACER */
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
new file mode 100644
index 0000000000..c892e173ec
--- /dev/null
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ */
+
+#include <linux/export.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+
+#include <asm/checksum.h>
+#include <asm/cacheflush.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <linux/ftrace.h>
+#include <linux/uaccess.h>
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif
+
+/*
+ * Assembly functions that may be used (directly or indirectly) by modules
+ */
+EXPORT_SYMBOL(__copy_tofrom_user);
+
+#ifdef CONFIG_OPT_LIB_ASM
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+#endif
+
+EXPORT_SYMBOL(empty_zero_page);
+
+EXPORT_SYMBOL(mbc);
+
+extern void __divsi3(void);
+EXPORT_SYMBOL(__divsi3);
+extern void __modsi3(void);
+EXPORT_SYMBOL(__modsi3);
+extern void __mulsi3(void);
+EXPORT_SYMBOL(__mulsi3);
+extern void __udivsi3(void);
+EXPORT_SYMBOL(__udivsi3);
+extern void __umodsi3(void);
+EXPORT_SYMBOL(__umodsi3);
diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S
new file mode 100644
index 0000000000..1228a09d81
--- /dev/null
+++ b/arch/microblaze/kernel/misc.S
@@ -0,0 +1,66 @@
+/*
+ * Miscellaneous low-level MMU functions.
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from arch/ppc/kernel/misc.S
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+ .text
+/*
+ * Flush MMU TLB
+ *
+ * We avoid flushing the pinned 0, 1 and possibly 2 entries.
+ */
+.globl _tlbia;
+.type _tlbia, @function
+.align 4;
+_tlbia:
+ lwi r12, r0, tlb_skip;
+ /* isync */
+_tlbia_1:
+ mts rtlbx, r12
+ nop
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ nop
+ rsubi r11, r12, MICROBLAZE_TLB_SIZE - 1
+ bneid r11, _tlbia_1 /* loop for all entries */
+ addik r12, r12, 1
+ mbar 1 /* sync */
+ rtsd r15, 8
+ nop
+ .size _tlbia, . - _tlbia
+
+/*
+ * Flush MMU TLB for a particular address (in r5)
+ */
+.globl _tlbie;
+.type _tlbie, @function
+.align 4;
+_tlbie:
+ mts rtlbsx, r5 /* look up the address in TLB */
+ nop
+ mfs r12, rtlbx /* Retrieve index */
+ nop
+ blti r12, _tlbie_1 /* Check if found */
+ mts rtlbhi, r0 /* flush: ensure V is clear */
+ nop
+ mbar 1 /* sync */
+_tlbie_1:
+ rtsd r15, 8
+ nop
+
+ .size _tlbie, . - _tlbie
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
new file mode 100644
index 0000000000..e5db3a57b9
--- /dev/null
+++ b/arch/microblaze/kernel/module.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ */
+
+#include <linux/export.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/pgtable.h>
+
+#include <asm/cacheflush.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec, struct module *module)
+{
+
+ unsigned int i;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ unsigned long int *location;
+ unsigned long int value;
+
+ pr_debug("Applying add relocation section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr +
+ rela[i].r_offset;
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr +
+ ELF32_R_SYM(rela[i].r_info);
+ value = sym->st_value + rela[i].r_addend;
+
+ switch (ELF32_R_TYPE(rela[i].r_info)) {
+
+ /*
+ * Be careful! mb-gcc / mb-ld splits the relocs between the
+ * text and the reloc table. In general this means we must
+ * read the current contents of (*location), add any offset
+ * then store the result back in
+ */
+
+ case R_MICROBLAZE_32:
+ *location = value;
+ break;
+
+ case R_MICROBLAZE_64:
+ location[0] = (location[0] & 0xFFFF0000) |
+ (value >> 16);
+ location[1] = (location[1] & 0xFFFF0000) |
+ (value & 0xFFFF);
+ break;
+
+ case R_MICROBLAZE_64_PCREL:
+ value -= (unsigned long int)(location) + 4;
+ location[0] = (location[0] & 0xFFFF0000) |
+ (value >> 16);
+ location[1] = (location[1] & 0xFFFF0000) |
+ (value & 0xFFFF);
+ pr_debug("R_MICROBLAZE_64_PCREL (%08lx)\n",
+ value);
+ break;
+
+ case R_MICROBLAZE_32_PCREL_LO:
+ pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+ break;
+
+ case R_MICROBLAZE_64_NONE:
+ pr_debug("R_MICROBLAZE_64_NONE\n");
+ break;
+
+ case R_MICROBLAZE_NONE:
+ pr_debug("R_MICROBLAZE_NONE\n");
+ break;
+
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ module->name,
+ ELF32_R_TYPE(rela[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *module)
+{
+ flush_dcache();
+ return 0;
+}
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
new file mode 100644
index 0000000000..56342e1144
--- /dev/null
+++ b/arch/microblaze/kernel/process.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/bitops.h>
+#include <linux/ptrace.h>
+#include <asm/cacheflush.h>
+
+void show_regs(struct pt_regs *regs)
+{
+ show_regs_print_info(KERN_INFO);
+
+ pr_info(" Registers dump: mode=%X\r\n", regs->pt_mode);
+ pr_info(" r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
+ regs->r1, regs->r2, regs->r3, regs->r4);
+ pr_info(" r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
+ regs->r5, regs->r6, regs->r7, regs->r8);
+ pr_info(" r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n",
+ regs->r9, regs->r10, regs->r11, regs->r12);
+ pr_info(" r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n",
+ regs->r13, regs->r14, regs->r15, regs->r16);
+ pr_info(" r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n",
+ regs->r17, regs->r18, regs->r19, regs->r20);
+ pr_info(" r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n",
+ regs->r21, regs->r22, regs->r23, regs->r24);
+ pr_info(" r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n",
+ regs->r25, regs->r26, regs->r27, regs->r28);
+ pr_info(" r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n",
+ regs->r29, regs->r30, regs->r31, regs->pc);
+ pr_info(" msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
+ regs->msr, regs->ear, regs->esr, regs->fsr);
+}
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+void flush_thread(void)
+{
+}
+
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
+{
+ unsigned long clone_flags = args->flags;
+ unsigned long usp = args->stack;
+ unsigned long tls = args->tls;
+ struct pt_regs *childregs = task_pt_regs(p);
+ struct thread_info *ti = task_thread_info(p);
+
+ if (unlikely(args->fn)) {
+ /* if we're creating a new kernel thread then just zeroing all
+ * the registers. That's OK for a brand new thread.*/
+ memset(childregs, 0, sizeof(struct pt_regs));
+ memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+ ti->cpu_context.r1 = (unsigned long)childregs;
+ ti->cpu_context.r20 = (unsigned long)args->fn;
+ ti->cpu_context.r19 = (unsigned long)args->fn_arg;
+ childregs->pt_mode = 1;
+ local_save_flags(childregs->msr);
+ ti->cpu_context.msr = childregs->msr & ~MSR_IE;
+ ti->cpu_context.r15 = (unsigned long)ret_from_kernel_thread - 8;
+ return 0;
+ }
+ *childregs = *current_pt_regs();
+ if (usp)
+ childregs->r1 = usp;
+
+ memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+ ti->cpu_context.r1 = (unsigned long)childregs;
+ childregs->msr |= MSR_UMS;
+
+ /* we should consider the fact that childregs is a copy of the parent
+ * regs which were saved immediately after entering the kernel state
+ * before enabling VM. This MSR will be restored in switch_to and
+ * RETURN() and we want to have the right machine state there
+ * specifically this state must have INTs disabled before and enabled
+ * after performing rtbd
+ * compose the right MSR for RETURN(). It will work for switch_to also
+ * excepting for VM and UMS
+ * don't touch UMS , CARRY and cache bits
+ * right now MSR is a copy of parent one */
+ childregs->msr &= ~MSR_EIP;
+ childregs->msr |= MSR_IE;
+ childregs->msr &= ~MSR_VM;
+ childregs->msr |= MSR_VMS;
+ childregs->msr |= MSR_EE; /* exceptions will be enabled*/
+
+ ti->cpu_context.msr = (childregs->msr|MSR_VM);
+ ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+ ti->cpu_context.msr &= ~MSR_IE;
+ ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
+
+ /*
+ * r21 is the thread reg, r10 is 6th arg to clone
+ * which contains TLS area
+ */
+ if (clone_flags & CLONE_SETTLS)
+ childregs->r21 = tls;
+
+ return 0;
+}
+
+unsigned long __get_wchan(struct task_struct *p)
+{
+/* TBD (used by procfs) */
+ return 0;
+}
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+ regs->pc = pc;
+ regs->r1 = usp;
+ regs->pt_mode = 0;
+ regs->msr |= MSR_UMS;
+ regs->msr &= ~MSR_VM;
+}
+
+#include <linux/elfcore.h>
+/*
+ * Set up a thread for executing a new program
+ */
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
+{
+ return 0; /* MicroBlaze has no separate FPU registers */
+}
+
+void arch_cpu_idle(void)
+{
+}
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
new file mode 100644
index 0000000000..e424c796e2
--- /dev/null
+++ b/arch/microblaze/kernel/prom.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ * {engebret|bergner}@us.ibm.com
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+
+void __init early_init_devtree(void *params)
+{
+ pr_debug(" -> early_init_devtree(%p)\n", params);
+
+ early_init_dt_scan(params);
+ if (!strlen(boot_command_line))
+ strscpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+
+ memblock_allow_resize();
+
+ pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
+
+ pr_debug(" <- early_init_devtree()\n");
+}
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
new file mode 100644
index 0000000000..5234d0c1dc
--- /dev/null
+++ b/arch/microblaze/kernel/ptrace.c
@@ -0,0 +1,169 @@
+/*
+ * `ptrace' system call
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2004-2007 John Williams <john.williams@petalogix.com>
+ *
+ * derived from arch/v850/kernel/ptrace.c
+ *
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
+ *
+ * Derived from arch/mips/kernel/ptrace.c:
+ *
+ * Copyright (C) 1992 Ross Biro
+ * Copyright (C) Linus Torvalds
+ * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/syscall.h>
+#include <linux/io.h>
+
+/* Returns the address where the register at REG_OFFS in P is stashed away. */
+static microblaze_reg_t *reg_save_addr(unsigned reg_offs,
+ struct task_struct *t)
+{
+ struct pt_regs *regs;
+
+ /*
+ * Three basic cases:
+ *
+ * (1) A register normally saved before calling the scheduler, is
+ * available in the kernel entry pt_regs structure at the top
+ * of the kernel stack. The kernel trap/irq exit path takes
+ * care to save/restore almost all registers for ptrace'd
+ * processes.
+ *
+ * (2) A call-clobbered register, where the process P entered the
+ * kernel via [syscall] trap, is not stored anywhere; that's
+ * OK, because such registers are not expected to be preserved
+ * when the trap returns anyway (so we don't actually bother to
+ * test for this case).
+ *
+ * (3) A few registers not used at all by the kernel, and so
+ * normally never saved except by context-switches, are in the
+ * context switch state.
+ */
+
+ /* Register saved during kernel entry (or not available). */
+ regs = task_pt_regs(t);
+
+ return (microblaze_reg_t *)((char *)regs + reg_offs);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ int rval;
+ unsigned long val = 0;
+
+ switch (request) {
+ /* Read/write the word at location ADDR in the registers. */
+ case PTRACE_PEEKUSR:
+ case PTRACE_POKEUSR:
+ pr_debug("PEEKUSR/POKEUSR : 0x%08lx\n", addr);
+ rval = 0;
+ if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
+ /*
+ * Special requests that don't actually correspond
+ * to offsets in struct pt_regs.
+ */
+ if (addr == PT_TEXT_ADDR) {
+ val = child->mm->start_code;
+ } else if (addr == PT_DATA_ADDR) {
+ val = child->mm->start_data;
+ } else if (addr == PT_TEXT_LEN) {
+ val = child->mm->end_code
+ - child->mm->start_code;
+ } else {
+ rval = -EIO;
+ }
+ } else if (addr < PT_SIZE && (addr & 0x3) == 0) {
+ microblaze_reg_t *reg_addr = reg_save_addr(addr, child);
+ if (request == PTRACE_PEEKUSR)
+ val = *reg_addr;
+ else {
+#if 1
+ *reg_addr = data;
+#else
+ /* MS potential problem on WB system
+ * Be aware that reg_addr is virtual address
+ * virt_to_phys conversion is necessary.
+ * This could be sensible solution.
+ */
+ u32 paddr = virt_to_phys((u32)reg_addr);
+ invalidate_icache_range(paddr, paddr + 4);
+ *reg_addr = data;
+ flush_dcache_range(paddr, paddr + 4);
+#endif
+ }
+ } else
+ rval = -EIO;
+
+ if (rval == 0 && request == PTRACE_PEEKUSR)
+ rval = put_user(val, (unsigned long __user *)data);
+ break;
+ default:
+ rval = ptrace_request(child, request, addr, data);
+ }
+ return rval;
+}
+
+asmlinkage unsigned long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ unsigned long ret = 0;
+
+ secure_computing_strict(regs->r12);
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ ptrace_report_syscall_entry(regs))
+ /*
+ * Tracing decided this syscall should not happen.
+ * We'll return a bogus call number to get an ENOSYS
+ * error, but leave the original number in regs->regs[0].
+ */
+ ret = -1L;
+
+ audit_syscall_entry(regs->r12, regs->r5, regs->r6, regs->r7, regs->r8);
+
+ return ret ?: regs->r12;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ int step;
+
+ audit_syscall_exit(regs);
+
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ ptrace_report_syscall_exit(regs, step);
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+ /* nothing to do */
+}
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
new file mode 100644
index 0000000000..2f66c79630
--- /dev/null
+++ b/arch/microblaze/kernel/reset.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+
+void machine_shutdown(void)
+{
+ pr_notice("Machine shutdown...\n");
+ while (1)
+ ;
+}
+
+void machine_halt(void)
+{
+ pr_notice("Machine halt...\n");
+ while (1)
+ ;
+}
+
+void machine_power_off(void)
+{
+ pr_notice("Machine power off...\n");
+ while (1)
+ ;
+}
+
+void machine_restart(char *cmd)
+{
+ do_kernel_restart(cmd);
+ /* Give the restart hook 1 s to take us down */
+ mdelay(1000);
+ pr_emerg("Reboot failed -- System halted\n");
+ while (1);
+}
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
new file mode 100644
index 0000000000..f417333ecc
--- /dev/null
+++ b/arch/microblaze/kernel/setup.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/clocksource.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/debugfs.h>
+#include <linux/of_fdt.h>
+#include <linux/pgtable.h>
+
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/page.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+#include <linux/param.h>
+#include <linux/pci.h>
+#include <linux/cache.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/entry.h>
+#include <asm/cpuinfo.h>
+
+
+DEFINE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
+DEFINE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
+DEFINE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DEFINE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
+
+/*
+ * Placed cmd_line to .data section because can be initialized from
+ * ASM code. Default position is BSS section which is cleared
+ * in machine_early_init().
+ */
+char cmd_line[COMMAND_LINE_SIZE] __section(".data");
+
+void __init setup_arch(char **cmdline_p)
+{
+ *cmdline_p = boot_command_line;
+
+ setup_memory();
+
+ console_verbose();
+
+ unflatten_device_tree();
+
+ setup_cpuinfo();
+
+ microblaze_cache_init();
+
+ xilinx_pci_init();
+}
+
+#ifdef CONFIG_MTD_UCLINUX
+/* Handle both romfs and cramfs types, without generating unnecessary
+ code (ie no point checking for CRAMFS if it's not even enabled) */
+inline unsigned get_romfs_len(unsigned *addr)
+{
+#ifdef CONFIG_ROMFS_FS
+ if (memcmp(&addr[0], "-rom1fs-", 8) == 0) /* romfs */
+ return be32_to_cpu(addr[2]);
+#endif
+
+#ifdef CONFIG_CRAMFS
+ if (addr[0] == le32_to_cpu(0x28cd3d45)) /* cramfs */
+ return le32_to_cpu(addr[1]);
+#endif
+ return 0;
+}
+#endif /* CONFIG_MTD_UCLINUX_EBSS */
+
+unsigned long kernel_tlb;
+
+void __init machine_early_init(const char *cmdline, unsigned int ram,
+ unsigned int fdt, unsigned int msr, unsigned int tlb0,
+ unsigned int tlb1)
+{
+ unsigned long *src, *dst;
+ unsigned int offset = 0;
+
+ /* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the
+ * end of kernel. There are two position which we want to check.
+ * The first is __init_end and the second __bss_start.
+ */
+#ifdef CONFIG_MTD_UCLINUX
+ int romfs_size;
+ unsigned int romfs_base;
+ char *old_klimit = klimit;
+
+ romfs_base = (ram ? ram : (unsigned int)&__init_end);
+ romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+ if (!romfs_size) {
+ romfs_base = (unsigned int)&__bss_start;
+ romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+ }
+
+ /* Move ROMFS out of BSS before clearing it */
+ if (romfs_size > 0) {
+ memmove(&__bss_stop, (int *)romfs_base, romfs_size);
+ klimit += romfs_size;
+ }
+#endif
+
+/* clearing bss section */
+ memset(__bss_start, 0, __bss_stop-__bss_start);
+ memset(_ssbss, 0, _esbss-_ssbss);
+
+/* initialize device tree for usage in early_printk */
+ early_init_devtree(_fdt_start);
+
+ /* setup kernel_tlb after BSS cleaning
+ * Maybe worth to move to asm code */
+ kernel_tlb = tlb0 + tlb1;
+ /* printk("TLB1 0x%08x, TLB0 0x%08x, tlb 0x%x\n", tlb0,
+ tlb1, kernel_tlb); */
+
+ pr_info("Ramdisk addr 0x%08x, ", ram);
+ if (fdt)
+ pr_info("FDT at 0x%08x\n", fdt);
+ else
+ pr_info("Compiled-in FDT at %p\n", _fdt_start);
+
+#ifdef CONFIG_MTD_UCLINUX
+ pr_info("Found romfs @ 0x%08x (0x%08x)\n",
+ romfs_base, romfs_size);
+ pr_info("#### klimit %p ####\n", old_klimit);
+ BUG_ON(romfs_size < 0); /* What else can we do? */
+
+ pr_info("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+ romfs_size, romfs_base, (unsigned)&__bss_stop);
+
+ pr_info("New klimit: 0x%08x\n", (unsigned)klimit);
+#endif
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ if (msr) {
+ pr_info("!!!Your kernel has setup MSR instruction but ");
+ pr_cont("CPU don't have it %x\n", msr);
+ }
+#else
+ if (!msr) {
+ pr_info("!!!Your kernel not setup MSR instruction but ");
+ pr_cont("CPU have it %x\n", msr);
+ }
+#endif
+
+ /* Do not copy reset vectors. offset = 0x2 means skip the first
+ * two instructions. dst is pointer to MB vectors which are placed
+ * in block ram. If you want to copy reset vector setup offset to 0x0 */
+#if !CONFIG_MANUAL_RESET_VECTOR
+ offset = 0x2;
+#endif
+ dst = (unsigned long *) (offset * sizeof(u32));
+ for (src = __ivt_start + offset; src < __ivt_end; src++, dst++)
+ *dst = *src;
+
+ /* Initialize global data */
+ per_cpu(KM, 0) = 0x1; /* We start in kernel mode */
+ per_cpu(CURRENT_SAVE, 0) = (unsigned long)current;
+}
+
+void __init time_init(void)
+{
+ of_clk_init(NULL);
+ setup_cpuinfo_clk();
+ timer_probe();
+}
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *of_debugfs_root;
+
+static int microblaze_debugfs_init(void)
+{
+ of_debugfs_root = debugfs_create_dir("microblaze", NULL);
+ return 0;
+}
+arch_initcall(microblaze_debugfs_init);
+
+static int __init debugfs_tlb(void)
+{
+ debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip);
+ return 0;
+}
+device_initcall(debugfs_tlb);
+#endif
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
new file mode 100644
index 0000000000..c78a0ff480
--- /dev/null
+++ b/arch/microblaze/kernel/signal.c
@@ -0,0 +1,316 @@
+/*
+ * Signal handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003,2004 John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001 NEC Corporation
+ * Copyright (C) 2001 Miles Bader <miles@gnu.org>
+ * Copyright (C) 1999,2000 Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 1991,1992 Linus Torvalds
+ *
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
+ *
+ * This file was derived from the sh version, arch/sh/kernel/signal.c
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/percpu.h>
+#include <linux/linkage.h>
+#include <linux/resume_user_mode.h>
+#include <asm/entry.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+struct sigframe {
+ struct sigcontext sc;
+ unsigned long extramask[_NSIG_WORDS-1];
+ unsigned long tramp[2]; /* signal trampoline */
+};
+
+struct rt_sigframe {
+ struct siginfo info;
+ struct ucontext uc;
+ unsigned long tramp[2]; /* signal trampoline */
+};
+
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc, int *rval_p)
+{
+ unsigned int err = 0;
+
+#define COPY(x) {err |= __get_user(regs->x, &sc->regs.x); }
+ COPY(r0);
+ COPY(r1);
+ COPY(r2); COPY(r3); COPY(r4); COPY(r5);
+ COPY(r6); COPY(r7); COPY(r8); COPY(r9);
+ COPY(r10); COPY(r11); COPY(r12); COPY(r13);
+ COPY(r14); COPY(r15); COPY(r16); COPY(r17);
+ COPY(r18); COPY(r19); COPY(r20); COPY(r21);
+ COPY(r22); COPY(r23); COPY(r24); COPY(r25);
+ COPY(r26); COPY(r27); COPY(r28); COPY(r29);
+ COPY(r30); COPY(r31);
+ COPY(pc); COPY(ear); COPY(esr); COPY(fsr);
+#undef COPY
+
+ *rval_p = regs->r3;
+
+ return err;
+}
+
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *)(regs->r1);
+
+ sigset_t set;
+ int rval;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current->restart_block.fn = do_no_restart_syscall;
+
+ if (!access_ok(frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ set_current_blocked(&set);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
+ goto badframe;
+
+ if (restore_altstack(&frame->uc.uc_stack))
+ goto badframe;
+
+ return rval;
+
+badframe:
+ force_sig(SIGSEGV);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+ unsigned long mask)
+{
+ int err = 0;
+
+#define COPY(x) {err |= __put_user(regs->x, &sc->regs.x); }
+ COPY(r0);
+ COPY(r1);
+ COPY(r2); COPY(r3); COPY(r4); COPY(r5);
+ COPY(r6); COPY(r7); COPY(r8); COPY(r9);
+ COPY(r10); COPY(r11); COPY(r12); COPY(r13);
+ COPY(r14); COPY(r15); COPY(r16); COPY(r17);
+ COPY(r18); COPY(r19); COPY(r20); COPY(r21);
+ COPY(r22); COPY(r23); COPY(r24); COPY(r25);
+ COPY(r26); COPY(r27); COPY(r28); COPY(r29);
+ COPY(r30); COPY(r31);
+ COPY(pc); COPY(ear); COPY(esr); COPY(fsr);
+#undef COPY
+
+ err |= __put_user(mask, &sc->oldmask);
+
+ return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size)
+{
+ /* Default to using normal stack */
+ unsigned long sp = sigsp(regs->r1, ksig);
+
+ return (void __user *)((sp - frame_size) & -8UL);
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+ int err = 0, sig = ksig->sig;
+ unsigned long address = 0;
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+ if (!access_ok(frame, sizeof(*frame)))
+ return -EFAULT;
+
+ if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+ err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(NULL, &frame->uc.uc_link);
+ err |= __save_altstack(&frame->uc.uc_stack, regs->r1);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext,
+ regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ /* minus 8 is offset to cater for "rtsd r15,8" */
+ /* addi r12, r0, __NR_sigreturn */
+ err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+ frame->tramp + 0);
+ /* brki r14, 0x8 */
+ err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+ /* Return from sighandler will jump to the tramp.
+ Negative 8 offset because return is rtsd r15, 8 */
+ regs->r15 = ((unsigned long)frame->tramp)-8;
+
+ address = ((unsigned long)frame->tramp);
+ pmdp = pmd_off(current->mm, address);
+
+ preempt_disable();
+ ptep = pte_offset_map(pmdp, address);
+ if (ptep && pte_present(*ptep)) {
+ address = (unsigned long) page_address(pte_page(*ptep));
+ /* MS: I need add offset in page */
+ address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
+ /* MS address is virtual */
+ address = __virt_to_phys(address);
+ invalidate_icache_range(address, address + 8);
+ flush_dcache_range(address, address + 8);
+ }
+ if (ptep)
+ pte_unmap(ptep);
+ preempt_enable();
+ if (err)
+ return -EFAULT;
+
+ /* Set up registers for signal handler */
+ regs->r1 = (unsigned long) frame;
+
+ /* Signal handler args: */
+ regs->r5 = sig; /* arg 0: signum */
+ regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
+ regs->r7 = (unsigned long) &frame->uc; /* arg2: ucontext */
+ /* Offset to handle microblaze rtid r14, 0 */
+ regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
+
+#ifdef DEBUG_SIG
+ pr_info("SIG deliver (%s:%d): sp=%p pc=%08lx\n",
+ current->comm, current->pid, frame, regs->pc);
+#endif
+
+ return 0;
+}
+
+/* Handle restarting system calls */
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+ switch (regs->r3) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ if (!has_handler)
+ goto do_restart;
+ regs->r3 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r3 = -EINTR;
+ break;
+ }
+ fallthrough;
+ case -ERESTARTNOINTR:
+do_restart:
+ /* offset of 4 bytes to re-execute trap (brki) instruction */
+ regs->pc -= 4;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+ sigset_t *oldset = sigmask_to_save();
+ int ret;
+
+ /* Set up the stack frame */
+ ret = setup_rt_frame(ksig, oldset, regs);
+
+ signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs, int in_syscall)
+{
+ struct ksignal ksig;
+
+#ifdef DEBUG_SIG
+ pr_info("do signal: %p %d\n", regs, in_syscall);
+ pr_info("do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1,
+ regs->r12, read_thread_flags());
+#endif
+
+ if (get_signal(&ksig)) {
+ /* Whee! Actually deliver the signal. */
+ if (in_syscall)
+ handle_restart(regs, &ksig.ka, 1);
+ handle_signal(&ksig, regs);
+ return;
+ }
+
+ if (in_syscall)
+ handle_restart(regs, NULL, 0);
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ restore_saved_sigmask();
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall)
+{
+ if (test_thread_flag(TIF_SIGPENDING) ||
+ test_thread_flag(TIF_NOTIFY_SIGNAL))
+ do_signal(regs, in_syscall);
+
+ if (test_thread_flag(TIF_NOTIFY_RESUME))
+ resume_user_mode_work(regs);
+}
diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c
new file mode 100644
index 0000000000..b266c4d6ed
--- /dev/null
+++ b/arch/microblaze/kernel/stacktrace.c
@@ -0,0 +1,31 @@
+/*
+ * Stack trace support for Microblaze.
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/ptrace.h>
+#include <asm/unwind.h>
+
+void save_stack_trace(struct stack_trace *trace)
+{
+ /* Exclude our helper functions from the trace*/
+ trace->skip += 2;
+ microblaze_unwind(NULL, trace, "");
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+ microblaze_unwind(tsk, trace, "");
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
new file mode 100644
index 0000000000..ed9f34da1a
--- /dev/null
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ * Tetsuya OHKAWA <tetsuya@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/syscalls.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/sys.h>
+#include <linux/ipc.h>
+#include <linux/file.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <asm/syscalls.h>
+
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ off_t, pgoff)
+{
+ if (pgoff & ~PAGE_MASK)
+ return -EINVAL;
+
+ return ksys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
+}
+
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, pgoff)
+{
+ if (pgoff & (~PAGE_MASK >> 12))
+ return -EINVAL;
+
+ return ksys_mmap_pgoff(addr, len, prot, flags, fd,
+ pgoff >> (PAGE_SHIFT - 12));
+}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
new file mode 100644
index 0000000000..3bc60a2b15
--- /dev/null
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define __SYSCALL(nr, entry) .long entry
+ENTRY(sys_call_table)
+#include <asm/syscall_table.h>
diff --git a/arch/microblaze/kernel/syscalls/Makefile b/arch/microblaze/kernel/syscalls/Makefile
new file mode 100644
index 0000000000..b265e4bc16
--- /dev/null
+++ b/arch/microblaze/kernel/syscalls/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+kapi := arch/$(SRCARCH)/include/generated/asm
+uapi := arch/$(SRCARCH)/include/generated/uapi/asm
+
+$(shell mkdir -p $(uapi) $(kapi))
+
+syscall := $(src)/syscall.tbl
+syshdr := $(srctree)/scripts/syscallhdr.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
+
+quiet_cmd_syshdr = SYSHDR $@
+ cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
+
+quiet_cmd_systbl = SYSTBL $@
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
+
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
+ $(call if_changed,syshdr)
+
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
+ $(call if_changed,systbl)
+
+uapisyshdr-y += unistd_32.h
+kapisyshdr-y += syscall_table.h
+
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
+
+PHONY += all
+all: $(uapisyshdr-y) $(kapisyshdr-y)
+ @:
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
new file mode 100644
index 0000000000..a3798c2637
--- /dev/null
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -0,0 +1,460 @@
+# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+#
+# system call numbers and entry vectors for microblaze
+#
+# The format is:
+# <number> <abi> <name> <entry point>
+#
+# The <abi> is always "common" for this file
+#
+0 common restart_syscall sys_restart_syscall
+1 common exit sys_exit
+2 common fork sys_fork
+3 common read sys_read
+4 common write sys_write
+5 common open sys_open
+6 common close sys_close
+7 common waitpid sys_waitpid
+8 common creat sys_creat
+9 common link sys_link
+10 common unlink sys_unlink
+11 common execve sys_execve
+12 common chdir sys_chdir
+13 common time sys_time32
+14 common mknod sys_mknod
+15 common chmod sys_chmod
+16 common lchown sys_lchown
+17 common break sys_ni_syscall
+18 common oldstat sys_ni_syscall
+19 common lseek sys_lseek
+20 common getpid sys_getpid
+21 common mount sys_mount
+22 common umount sys_oldumount
+23 common setuid sys_setuid
+24 common getuid sys_getuid
+25 common stime sys_stime32
+26 common ptrace sys_ptrace
+27 common alarm sys_alarm
+28 common oldfstat sys_ni_syscall
+29 common pause sys_pause
+30 common utime sys_utime32
+31 common stty sys_ni_syscall
+32 common gtty sys_ni_syscall
+33 common access sys_access
+34 common nice sys_nice
+35 common ftime sys_ni_syscall
+36 common sync sys_sync
+37 common kill sys_kill
+38 common rename sys_rename
+39 common mkdir sys_mkdir
+40 common rmdir sys_rmdir
+41 common dup sys_dup
+42 common pipe sys_pipe
+43 common times sys_times
+44 common prof sys_ni_syscall
+45 common brk sys_brk
+46 common setgid sys_setgid
+47 common getgid sys_getgid
+48 common signal sys_signal
+49 common geteuid sys_geteuid
+50 common getegid sys_getegid
+51 common acct sys_acct
+52 common umount2 sys_umount
+53 common lock sys_ni_syscall
+54 common ioctl sys_ioctl
+55 common fcntl sys_fcntl
+56 common mpx sys_ni_syscall
+57 common setpgid sys_setpgid
+58 common ulimit sys_ni_syscall
+59 common oldolduname sys_ni_syscall
+60 common umask sys_umask
+61 common chroot sys_chroot
+62 common ustat sys_ustat
+63 common dup2 sys_dup2
+64 common getppid sys_getppid
+65 common getpgrp sys_getpgrp
+66 common setsid sys_setsid
+67 common sigaction sys_ni_syscall
+68 common sgetmask sys_sgetmask
+69 common ssetmask sys_ssetmask
+70 common setreuid sys_setreuid
+71 common setregid sys_setregid
+72 common sigsuspend sys_ni_syscall
+73 common sigpending sys_sigpending
+74 common sethostname sys_sethostname
+75 common setrlimit sys_setrlimit
+76 common getrlimit sys_ni_syscall
+77 common getrusage sys_getrusage
+78 common gettimeofday sys_gettimeofday
+79 common settimeofday sys_settimeofday
+80 common getgroups sys_getgroups
+81 common setgroups sys_setgroups
+82 common select sys_ni_syscall
+83 common symlink sys_symlink
+84 common oldlstat sys_ni_syscall
+85 common readlink sys_readlink
+86 common uselib sys_uselib
+87 common swapon sys_swapon
+88 common reboot sys_reboot
+89 common readdir sys_ni_syscall
+90 common mmap sys_mmap
+91 common munmap sys_munmap
+92 common truncate sys_truncate
+93 common ftruncate sys_ftruncate
+94 common fchmod sys_fchmod
+95 common fchown sys_fchown
+96 common getpriority sys_getpriority
+97 common setpriority sys_setpriority
+98 common profil sys_ni_syscall
+99 common statfs sys_statfs
+100 common fstatfs sys_fstatfs
+101 common ioperm sys_ni_syscall
+102 common socketcall sys_socketcall
+103 common syslog sys_syslog
+104 common setitimer sys_setitimer
+105 common getitimer sys_getitimer
+106 common stat sys_newstat
+107 common lstat sys_newlstat
+108 common fstat sys_newfstat
+109 common olduname sys_ni_syscall
+110 common iopl sys_ni_syscall
+111 common vhangup sys_vhangup
+112 common idle sys_ni_syscall
+113 common vm86old sys_ni_syscall
+114 common wait4 sys_wait4
+115 common swapoff sys_swapoff
+116 common sysinfo sys_sysinfo
+117 common ipc sys_ni_syscall
+118 common fsync sys_fsync
+119 common sigreturn sys_ni_syscall
+120 common clone sys_clone
+121 common setdomainname sys_setdomainname
+122 common uname sys_newuname
+123 common modify_ldt sys_ni_syscall
+124 common adjtimex sys_adjtimex_time32
+125 common mprotect sys_mprotect
+126 common sigprocmask sys_sigprocmask
+127 common create_module sys_ni_syscall
+128 common init_module sys_init_module
+129 common delete_module sys_delete_module
+130 common get_kernel_syms sys_ni_syscall
+131 common quotactl sys_quotactl
+132 common getpgid sys_getpgid
+133 common fchdir sys_fchdir
+134 common bdflush sys_ni_syscall
+135 common sysfs sys_sysfs
+136 common personality sys_personality
+137 common afs_syscall sys_ni_syscall
+138 common setfsuid sys_setfsuid
+139 common setfsgid sys_setfsgid
+140 common _llseek sys_llseek
+141 common getdents sys_getdents
+142 common _newselect sys_select
+143 common flock sys_flock
+144 common msync sys_msync
+145 common readv sys_readv
+146 common writev sys_writev
+147 common getsid sys_getsid
+148 common fdatasync sys_fdatasync
+149 common _sysctl sys_ni_syscall
+150 common mlock sys_mlock
+151 common munlock sys_munlock
+152 common mlockall sys_mlockall
+153 common munlockall sys_munlockall
+154 common sched_setparam sys_sched_setparam
+155 common sched_getparam sys_sched_getparam
+156 common sched_setscheduler sys_sched_setscheduler
+157 common sched_getscheduler sys_sched_getscheduler
+158 common sched_yield sys_sched_yield
+159 common sched_get_priority_max sys_sched_get_priority_max
+160 common sched_get_priority_min sys_sched_get_priority_min
+161 common sched_rr_get_interval sys_sched_rr_get_interval_time32
+162 common nanosleep sys_nanosleep_time32
+163 common mremap sys_mremap
+164 common setresuid sys_setresuid
+165 common getresuid sys_getresuid
+166 common vm86 sys_ni_syscall
+167 common query_module sys_ni_syscall
+168 common poll sys_poll
+169 common nfsservctl sys_ni_syscall
+170 common setresgid sys_setresgid
+171 common getresgid sys_getresgid
+172 common prctl sys_prctl
+173 common rt_sigreturn sys_rt_sigreturn_wrapper
+174 common rt_sigaction sys_rt_sigaction
+175 common rt_sigprocmask sys_rt_sigprocmask
+176 common rt_sigpending sys_rt_sigpending
+177 common rt_sigtimedwait sys_rt_sigtimedwait_time32
+178 common rt_sigqueueinfo sys_rt_sigqueueinfo
+179 common rt_sigsuspend sys_rt_sigsuspend
+180 common pread64 sys_pread64
+181 common pwrite64 sys_pwrite64
+182 common chown sys_chown
+183 common getcwd sys_getcwd
+184 common capget sys_capget
+185 common capset sys_capset
+186 common sigaltstack sys_ni_syscall
+187 common sendfile sys_sendfile
+188 common getpmsg sys_ni_syscall
+189 common putpmsg sys_ni_syscall
+190 common vfork sys_vfork
+191 common ugetrlimit sys_getrlimit
+192 common mmap2 sys_mmap2
+193 common truncate64 sys_truncate64
+194 common ftruncate64 sys_ftruncate64
+195 common stat64 sys_stat64
+196 common lstat64 sys_lstat64
+197 common fstat64 sys_fstat64
+198 common lchown32 sys_lchown
+199 common getuid32 sys_getuid
+200 common getgid32 sys_getgid
+201 common geteuid32 sys_geteuid
+202 common getegid32 sys_getegid
+203 common setreuid32 sys_setreuid
+204 common setregid32 sys_setregid
+205 common getgroups32 sys_getgroups
+206 common setgroups32 sys_setgroups
+207 common fchown32 sys_fchown
+208 common setresuid32 sys_setresuid
+209 common getresuid32 sys_getresuid
+210 common setresgid32 sys_setresgid
+211 common getresgid32 sys_getresgid
+212 common chown32 sys_chown
+213 common setuid32 sys_setuid
+214 common setgid32 sys_setgid
+215 common setfsuid32 sys_setfsuid
+216 common setfsgid32 sys_setfsgid
+217 common pivot_root sys_pivot_root
+218 common mincore sys_mincore
+219 common madvise sys_madvise
+220 common getdents64 sys_getdents64
+221 common fcntl64 sys_fcntl64
+# 222 is reserved for TUX
+# 223 is unused
+224 common gettid sys_gettid
+225 common readahead sys_readahead
+226 common setxattr sys_setxattr
+227 common lsetxattr sys_lsetxattr
+228 common fsetxattr sys_fsetxattr
+229 common getxattr sys_getxattr
+230 common lgetxattr sys_lgetxattr
+231 common fgetxattr sys_fgetxattr
+232 common listxattr sys_listxattr
+233 common llistxattr sys_llistxattr
+234 common flistxattr sys_flistxattr
+235 common removexattr sys_removexattr
+236 common lremovexattr sys_lremovexattr
+237 common fremovexattr sys_fremovexattr
+238 common tkill sys_tkill
+239 common sendfile64 sys_sendfile64
+240 common futex sys_futex_time32
+241 common sched_setaffinity sys_sched_setaffinity
+242 common sched_getaffinity sys_sched_getaffinity
+243 common set_thread_area sys_ni_syscall
+244 common get_thread_area sys_ni_syscall
+245 common io_setup sys_io_setup
+246 common io_destroy sys_io_destroy
+247 common io_getevents sys_io_getevents_time32
+248 common io_submit sys_io_submit
+249 common io_cancel sys_io_cancel
+250 common fadvise64 sys_fadvise64
+# 251 is available for reuse (was briefly sys_set_zone_reclaim)
+252 common exit_group sys_exit_group
+253 common lookup_dcookie sys_lookup_dcookie
+254 common epoll_create sys_epoll_create
+255 common epoll_ctl sys_epoll_ctl
+256 common epoll_wait sys_epoll_wait
+257 common remap_file_pages sys_remap_file_pages
+258 common set_tid_address sys_set_tid_address
+259 common timer_create sys_timer_create
+260 common timer_settime sys_timer_settime32
+261 common timer_gettime sys_timer_gettime32
+262 common timer_getoverrun sys_timer_getoverrun
+263 common timer_delete sys_timer_delete
+264 common clock_settime sys_clock_settime32
+265 common clock_gettime sys_clock_gettime32
+266 common clock_getres sys_clock_getres_time32
+267 common clock_nanosleep sys_clock_nanosleep_time32
+268 common statfs64 sys_statfs64
+269 common fstatfs64 sys_fstatfs64
+270 common tgkill sys_tgkill
+271 common utimes sys_utimes_time32
+272 common fadvise64_64 sys_fadvise64_64
+273 common vserver sys_ni_syscall
+274 common mbind sys_mbind
+275 common get_mempolicy sys_get_mempolicy
+276 common set_mempolicy sys_set_mempolicy
+277 common mq_open sys_mq_open
+278 common mq_unlink sys_mq_unlink
+279 common mq_timedsend sys_mq_timedsend_time32
+280 common mq_timedreceive sys_mq_timedreceive_time32
+281 common mq_notify sys_mq_notify
+282 common mq_getsetattr sys_mq_getsetattr
+283 common kexec_load sys_kexec_load
+284 common waitid sys_waitid
+# 285 was setaltroot
+286 common add_key sys_add_key
+287 common request_key sys_request_key
+288 common keyctl sys_keyctl
+289 common ioprio_set sys_ioprio_set
+290 common ioprio_get sys_ioprio_get
+291 common inotify_init sys_inotify_init
+292 common inotify_add_watch sys_inotify_add_watch
+293 common inotify_rm_watch sys_inotify_rm_watch
+294 common migrate_pages sys_ni_syscall
+295 common openat sys_openat
+296 common mkdirat sys_mkdirat
+297 common mknodat sys_mknodat
+298 common fchownat sys_fchownat
+299 common futimesat sys_futimesat_time32
+300 common fstatat64 sys_fstatat64
+301 common unlinkat sys_unlinkat
+302 common renameat sys_renameat
+303 common linkat sys_linkat
+304 common symlinkat sys_symlinkat
+305 common readlinkat sys_readlinkat
+306 common fchmodat sys_fchmodat
+307 common faccessat sys_faccessat
+308 common pselect6 sys_pselect6_time32
+309 common ppoll sys_ppoll_time32
+310 common unshare sys_unshare
+311 common set_robust_list sys_set_robust_list
+312 common get_robust_list sys_get_robust_list
+313 common splice sys_splice
+314 common sync_file_range sys_sync_file_range
+315 common tee sys_tee
+316 common vmsplice sys_vmsplice
+317 common move_pages sys_move_pages
+318 common getcpu sys_getcpu
+319 common epoll_pwait sys_epoll_pwait
+320 common utimensat sys_utimensat_time32
+321 common signalfd sys_signalfd
+322 common timerfd_create sys_timerfd_create
+323 common eventfd sys_eventfd
+324 common fallocate sys_fallocate
+325 common semtimedop sys_semtimedop_time32
+326 common timerfd_settime sys_timerfd_settime32
+327 common timerfd_gettime sys_timerfd_gettime32
+328 common semctl sys_old_semctl
+329 common semget sys_semget
+330 common semop sys_semop
+331 common msgctl sys_old_msgctl
+332 common msgget sys_msgget
+333 common msgrcv sys_msgrcv
+334 common msgsnd sys_msgsnd
+335 common shmat sys_shmat
+336 common shmctl sys_old_shmctl
+337 common shmdt sys_shmdt
+338 common shmget sys_shmget
+339 common signalfd4 sys_signalfd4
+340 common eventfd2 sys_eventfd2
+341 common epoll_create1 sys_epoll_create1
+342 common dup3 sys_dup3
+343 common pipe2 sys_pipe2
+344 common inotify_init1 sys_inotify_init1
+345 common socket sys_socket
+346 common socketpair sys_socketpair
+347 common bind sys_bind
+348 common listen sys_listen
+349 common accept sys_accept
+350 common connect sys_connect
+351 common getsockname sys_getsockname
+352 common getpeername sys_getpeername
+353 common sendto sys_sendto
+354 common send sys_send
+355 common recvfrom sys_recvfrom
+356 common recv sys_recv
+357 common setsockopt sys_setsockopt
+358 common getsockopt sys_getsockopt
+359 common shutdown sys_shutdown
+360 common sendmsg sys_sendmsg
+361 common recvmsg sys_recvmsg
+362 common accept4 sys_accept4
+363 common preadv sys_preadv
+364 common pwritev sys_pwritev
+365 common rt_tgsigqueueinfo sys_rt_tgsigqueueinfo
+366 common perf_event_open sys_perf_event_open
+367 common recvmmsg sys_recvmmsg_time32
+368 common fanotify_init sys_fanotify_init
+369 common fanotify_mark sys_fanotify_mark
+370 common prlimit64 sys_prlimit64
+371 common name_to_handle_at sys_name_to_handle_at
+372 common open_by_handle_at sys_open_by_handle_at
+373 common clock_adjtime sys_clock_adjtime32
+374 common syncfs sys_syncfs
+375 common setns sys_setns
+376 common sendmmsg sys_sendmmsg
+377 common process_vm_readv sys_process_vm_readv
+378 common process_vm_writev sys_process_vm_writev
+379 common kcmp sys_kcmp
+380 common finit_module sys_finit_module
+381 common sched_setattr sys_sched_setattr
+382 common sched_getattr sys_sched_getattr
+383 common renameat2 sys_renameat2
+384 common seccomp sys_seccomp
+385 common getrandom sys_getrandom
+386 common memfd_create sys_memfd_create
+387 common bpf sys_bpf
+388 common execveat sys_execveat
+389 common userfaultfd sys_userfaultfd
+390 common membarrier sys_membarrier
+391 common mlock2 sys_mlock2
+392 common copy_file_range sys_copy_file_range
+393 common preadv2 sys_preadv2
+394 common pwritev2 sys_pwritev2
+395 common pkey_mprotect sys_pkey_mprotect
+396 common pkey_alloc sys_pkey_alloc
+397 common pkey_free sys_pkey_free
+398 common statx sys_statx
+399 common io_pgetevents sys_io_pgetevents_time32
+400 common rseq sys_rseq
+# 401 and 402 are unused
+403 common clock_gettime64 sys_clock_gettime
+404 common clock_settime64 sys_clock_settime
+405 common clock_adjtime64 sys_clock_adjtime
+406 common clock_getres_time64 sys_clock_getres
+407 common clock_nanosleep_time64 sys_clock_nanosleep
+408 common timer_gettime64 sys_timer_gettime
+409 common timer_settime64 sys_timer_settime
+410 common timerfd_gettime64 sys_timerfd_gettime
+411 common timerfd_settime64 sys_timerfd_settime
+412 common utimensat_time64 sys_utimensat
+413 common pselect6_time64 sys_pselect6
+414 common ppoll_time64 sys_ppoll
+416 common io_pgetevents_time64 sys_io_pgetevents
+417 common recvmmsg_time64 sys_recvmmsg
+418 common mq_timedsend_time64 sys_mq_timedsend
+419 common mq_timedreceive_time64 sys_mq_timedreceive
+420 common semtimedop_time64 sys_semtimedop
+421 common rt_sigtimedwait_time64 sys_rt_sigtimedwait
+422 common futex_time64 sys_futex
+423 common sched_rr_get_interval_time64 sys_sched_rr_get_interval
+424 common pidfd_send_signal sys_pidfd_send_signal
+425 common io_uring_setup sys_io_uring_setup
+426 common io_uring_enter sys_io_uring_enter
+427 common io_uring_register sys_io_uring_register
+428 common open_tree sys_open_tree
+429 common move_mount sys_move_mount
+430 common fsopen sys_fsopen
+431 common fsconfig sys_fsconfig
+432 common fsmount sys_fsmount
+433 common fspick sys_fspick
+434 common pidfd_open sys_pidfd_open
+435 common clone3 sys_clone3
+436 common close_range sys_close_range
+437 common openat2 sys_openat2
+438 common pidfd_getfd sys_pidfd_getfd
+439 common faccessat2 sys_faccessat2
+440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
+442 common mount_setattr sys_mount_setattr
+443 common quotactl_fd sys_quotactl_fd
+444 common landlock_create_ruleset sys_landlock_create_ruleset
+445 common landlock_add_rule sys_landlock_add_rule
+446 common landlock_restrict_self sys_landlock_restrict_self
+# 447 reserved for memfd_secret
+448 common process_mrelease sys_process_mrelease
+449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
+451 common cachestat sys_cachestat
+452 common fchmodat2 sys_fchmodat2
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
new file mode 100644
index 0000000000..26c385582c
--- /dev/null
+++ b/arch/microblaze/kernel/timer.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012-2013 Xilinx, Inc.
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/sched/clock.h>
+#include <linux/sched_clock.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/timecounter.h>
+#include <asm/cpuinfo.h>
+
+static void __iomem *timer_baseaddr;
+
+static unsigned int freq_div_hz;
+static unsigned int timer_clock_freq;
+
+#define TCSR0 (0x00)
+#define TLR0 (0x04)
+#define TCR0 (0x08)
+#define TCSR1 (0x10)
+#define TLR1 (0x14)
+#define TCR1 (0x18)
+
+#define TCSR_MDT (1<<0)
+#define TCSR_UDT (1<<1)
+#define TCSR_GENT (1<<2)
+#define TCSR_CAPT (1<<3)
+#define TCSR_ARHT (1<<4)
+#define TCSR_LOAD (1<<5)
+#define TCSR_ENIT (1<<6)
+#define TCSR_ENT (1<<7)
+#define TCSR_TINT (1<<8)
+#define TCSR_PWMA (1<<9)
+#define TCSR_ENALL (1<<10)
+
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void timer_write32(u32 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+}
+
+static unsigned int timer_read32(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+static void timer_write32_be(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static unsigned int timer_read32_be(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
+static inline void xilinx_timer0_stop(void)
+{
+ write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT,
+ timer_baseaddr + TCSR0);
+}
+
+static inline void xilinx_timer0_start_periodic(unsigned long load_val)
+{
+ if (!load_val)
+ load_val = 1;
+ /* loading value to timer reg */
+ write_fn(load_val, timer_baseaddr + TLR0);
+
+ /* load the initial value */
+ write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
+
+ /* see timer data sheet for detail
+ * !ENALL - don't enable 'em all
+ * !PWMA - disable pwm
+ * TINT - clear interrupt status
+ * ENT- enable timer itself
+ * ENIT - enable interrupt
+ * !LOAD - clear the bit to let go
+ * ARHT - auto reload
+ * !CAPT - no external trigger
+ * !GENT - no external signal
+ * UDT - set the timer as down counter
+ * !MDT0 - generate mode
+ */
+ write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+ timer_baseaddr + TCSR0);
+}
+
+static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
+{
+ if (!load_val)
+ load_val = 1;
+ /* loading value to timer reg */
+ write_fn(load_val, timer_baseaddr + TLR0);
+
+ /* load the initial value */
+ write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
+
+ write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+ timer_baseaddr + TCSR0);
+}
+
+static int xilinx_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ pr_debug("%s: next event, delta %x\n", __func__, (u32)delta);
+ xilinx_timer0_start_oneshot(delta);
+ return 0;
+}
+
+static int xilinx_timer_shutdown(struct clock_event_device *evt)
+{
+ pr_info("%s\n", __func__);
+ xilinx_timer0_stop();
+ return 0;
+}
+
+static int xilinx_timer_set_periodic(struct clock_event_device *evt)
+{
+ pr_info("%s\n", __func__);
+ xilinx_timer0_start_periodic(freq_div_hz);
+ return 0;
+}
+
+static struct clock_event_device clockevent_xilinx_timer = {
+ .name = "xilinx_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 8,
+ .rating = 300,
+ .set_next_event = xilinx_timer_set_next_event,
+ .set_state_shutdown = xilinx_timer_shutdown,
+ .set_state_periodic = xilinx_timer_set_periodic,
+};
+
+static inline void timer_ack(void)
+{
+ write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0);
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_xilinx_timer;
+ timer_ack();
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static __init int xilinx_clockevent_init(void)
+{
+ clockevent_xilinx_timer.mult =
+ div_sc(timer_clock_freq, NSEC_PER_SEC,
+ clockevent_xilinx_timer.shift);
+ clockevent_xilinx_timer.max_delta_ns =
+ clockevent_delta2ns((u32)~0, &clockevent_xilinx_timer);
+ clockevent_xilinx_timer.max_delta_ticks = (u32)~0;
+ clockevent_xilinx_timer.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_xilinx_timer);
+ clockevent_xilinx_timer.min_delta_ticks = 1;
+ clockevent_xilinx_timer.cpumask = cpumask_of(0);
+ clockevents_register_device(&clockevent_xilinx_timer);
+
+ return 0;
+}
+
+static u64 xilinx_clock_read(void)
+{
+ return read_fn(timer_baseaddr + TCR1);
+}
+
+static u64 xilinx_read(struct clocksource *cs)
+{
+ /* reading actual value of timer 1 */
+ return (u64)xilinx_clock_read();
+}
+
+static struct timecounter xilinx_tc = {
+ .cc = NULL,
+};
+
+static u64 xilinx_cc_read(const struct cyclecounter *cc)
+{
+ return xilinx_read(NULL);
+}
+
+static struct cyclecounter xilinx_cc = {
+ .read = xilinx_cc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 8,
+};
+
+static int __init init_xilinx_timecounter(void)
+{
+ xilinx_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC,
+ xilinx_cc.shift);
+
+ timecounter_init(&xilinx_tc, &xilinx_cc, sched_clock());
+
+ return 0;
+}
+
+static struct clocksource clocksource_microblaze = {
+ .name = "xilinx_clocksource",
+ .rating = 300,
+ .read = xilinx_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init xilinx_clocksource_init(void)
+{
+ int ret;
+
+ ret = clocksource_register_hz(&clocksource_microblaze,
+ timer_clock_freq);
+ if (ret) {
+ pr_err("failed to register clocksource");
+ return ret;
+ }
+
+ /* stop timer1 */
+ write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
+ timer_baseaddr + TCSR1);
+ /* start timer1 - up counting without interrupt */
+ write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
+
+ /* register timecounter - for ftrace support */
+ return init_xilinx_timecounter();
+}
+
+static int __init xilinx_timer_init(struct device_node *timer)
+{
+ struct clk *clk;
+ static int initialized;
+ u32 irq;
+ u32 timer_num = 1;
+ int ret;
+
+ /* If this property is present, the device is a PWM and not a timer */
+ if (of_property_read_bool(timer, "#pwm-cells"))
+ return 0;
+
+ if (initialized)
+ return -EINVAL;
+
+ initialized = 1;
+
+ timer_baseaddr = of_iomap(timer, 0);
+ if (!timer_baseaddr) {
+ pr_err("ERROR: invalid timer base address\n");
+ return -ENXIO;
+ }
+
+ write_fn = timer_write32;
+ read_fn = timer_read32;
+
+ write_fn(TCSR_MDT, timer_baseaddr + TCSR0);
+ if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) {
+ write_fn = timer_write32_be;
+ read_fn = timer_read32_be;
+ }
+
+ irq = irq_of_parse_and_map(timer, 0);
+ if (irq <= 0) {
+ pr_err("Failed to parse and map irq");
+ return -EINVAL;
+ }
+
+ of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
+ if (timer_num) {
+ pr_err("Please enable two timers in HW\n");
+ return -EINVAL;
+ }
+
+ pr_info("%pOF: irq=%d\n", timer, irq);
+
+ clk = of_clk_get(timer, 0);
+ if (IS_ERR(clk)) {
+ pr_err("ERROR: timer CCF input clock not found\n");
+ /* If there is clock-frequency property than use it */
+ of_property_read_u32(timer, "clock-frequency",
+ &timer_clock_freq);
+ } else {
+ timer_clock_freq = clk_get_rate(clk);
+ }
+
+ if (!timer_clock_freq) {
+ pr_err("ERROR: Using CPU clock frequency\n");
+ timer_clock_freq = cpuinfo.cpu_clock_freq;
+ }
+
+ freq_div_hz = timer_clock_freq / HZ;
+
+ ret = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer",
+ &clockevent_xilinx_timer);
+ if (ret) {
+ pr_err("Failed to setup IRQ");
+ return ret;
+ }
+
+ ret = xilinx_clocksource_init();
+ if (ret)
+ return ret;
+
+ ret = xilinx_clockevent_init();
+ if (ret)
+ return ret;
+
+ sched_clock_register(xilinx_clock_read, 32, timer_clock_freq);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
+ xilinx_timer_init);
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
new file mode 100644
index 0000000000..94b6fe9314
--- /dev/null
+++ b/arch/microblaze/kernel/traps.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/kallsyms.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/debug_locks.h>
+
+#include <asm/exceptions.h>
+#include <asm/unwind.h>
+
+void trap_init(void)
+{
+ __enable_hw_exceptions();
+}
+
+static unsigned long kstack_depth_to_print; /* 0 == entire stack */
+
+static int __init kstack_setup(char *s)
+{
+ return !kstrtoul(s, 0, &kstack_depth_to_print);
+}
+__setup("kstack=", kstack_setup);
+
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
+{
+ unsigned long words_to_show;
+ u32 fp = (u32) sp;
+
+ if (fp == 0) {
+ if (task) {
+ fp = ((struct thread_info *)
+ (task->stack))->cpu_context.r1;
+ } else {
+ /* Pick up caller of dump_stack() */
+ fp = (u32)&sp - 8;
+ }
+ }
+
+ words_to_show = (THREAD_SIZE - (fp & (THREAD_SIZE - 1))) >> 2;
+ if (kstack_depth_to_print && (words_to_show > kstack_depth_to_print))
+ words_to_show = kstack_depth_to_print;
+
+ printk("%sKernel Stack:\n", loglvl);
+
+ /*
+ * Make the first line an 'odd' size if necessary to get
+ * remaining lines to start at an address multiple of 0x10
+ */
+ if (fp & 0xF) {
+ unsigned long line1_words = (0x10 - (fp & 0xF)) >> 2;
+ if (line1_words < words_to_show) {
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 32,
+ 4, (void *)fp, line1_words << 2, 0);
+ fp += line1_words << 2;
+ words_to_show -= line1_words;
+ }
+ }
+ print_hex_dump(loglvl, "", DUMP_PREFIX_ADDRESS, 32, 4, (void *)fp,
+ words_to_show << 2, 0);
+ printk("%s\n\nCall Trace:\n", loglvl);
+ microblaze_unwind(task, NULL, loglvl);
+ printk("%s\n", loglvl);
+
+ if (!task)
+ task = current;
+
+ debug_show_held_locks(task);
+}
diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c
new file mode 100644
index 0000000000..a530a7a6be
--- /dev/null
+++ b/arch/microblaze/kernel/unwind.c
@@ -0,0 +1,309 @@
+/*
+ * Backtrace support for Microblaze
+ *
+ * Copyright (C) 2010 Digital Design Corporation
+ *
+ * Based on arch/sh/kernel/cpu/sh5/unwind.c code which is:
+ * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/* #define DEBUG 1 */
+#include <linux/export.h>
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/stacktrace.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <asm/sections.h>
+#include <asm/exceptions.h>
+#include <asm/unwind.h>
+#include <asm/switch_to.h>
+
+struct stack_trace;
+
+/*
+ * On Microblaze, finding the previous stack frame is a little tricky.
+ * At this writing (3/2010), Microblaze does not support CONFIG_FRAME_POINTERS,
+ * and even if it did, gcc (4.1.2) does not store the frame pointer at
+ * a consistent offset within each frame. To determine frame size, it is
+ * necessary to search for the assembly instruction that creates or reclaims
+ * the frame and extract the size from it.
+ *
+ * Microblaze stores the stack pointer in r1, and creates a frame via
+ *
+ * addik r1, r1, -FRAME_SIZE
+ *
+ * The frame is reclaimed via
+ *
+ * addik r1, r1, FRAME_SIZE
+ *
+ * Frame creation occurs at or near the top of a function.
+ * Depending on the compiler, reclaim may occur at the end, or before
+ * a mid-function return.
+ *
+ * A stack frame is usually not created in a leaf function.
+ *
+ */
+
+/**
+ * get_frame_size - Extract the stack adjustment from an
+ * "addik r1, r1, adjust" instruction
+ * @instr : Microblaze instruction
+ *
+ * Return - Number of stack bytes the instruction reserves or reclaims
+ */
+static inline long get_frame_size(unsigned long instr)
+{
+ return abs((s16)(instr & 0xFFFF));
+}
+
+/**
+ * find_frame_creation - Search backward to find the instruction that creates
+ * the stack frame (hopefully, for the same function the
+ * initial PC is in).
+ * @pc : Program counter at which to begin the search
+ *
+ * Return - PC at which stack frame creation occurs
+ * NULL if this cannot be found, i.e. a leaf function
+ */
+static unsigned long *find_frame_creation(unsigned long *pc)
+{
+ int i;
+
+ /* NOTE: Distance to search is arbitrary
+ * 250 works well for most things,
+ * 750 picks up things like tcp_recvmsg(),
+ * 1000 needed for fat_fill_super()
+ */
+ for (i = 0; i < 1000; i++, pc--) {
+ unsigned long instr;
+ s16 frame_size;
+
+ if (!kernel_text_address((unsigned long) pc))
+ return NULL;
+
+ instr = *pc;
+
+ /* addik r1, r1, foo ? */
+ if ((instr & 0xFFFF0000) != 0x30210000)
+ continue; /* No */
+
+ frame_size = get_frame_size(instr);
+ if ((frame_size < 8) || (frame_size & 3)) {
+ pr_debug(" Invalid frame size %d at 0x%p\n",
+ frame_size, pc);
+ return NULL;
+ }
+
+ pr_debug(" Found frame creation at 0x%p, size %d\n", pc,
+ frame_size);
+ return pc;
+ }
+
+ return NULL;
+}
+
+/**
+ * lookup_prev_stack_frame - Find the stack frame of the previous function.
+ * @fp : Frame (stack) pointer for current function
+ * @pc : Program counter within current function
+ * @leaf_return : r15 value within current function. If the current function
+ * is a leaf, this is the caller's return address.
+ * @pprev_fp : On exit, set to frame (stack) pointer for previous function
+ * @pprev_pc : On exit, set to current function caller's return address
+ *
+ * Return - 0 on success, -EINVAL if the previous frame cannot be found
+ */
+static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
+ unsigned long leaf_return,
+ unsigned long *pprev_fp,
+ unsigned long *pprev_pc)
+{
+ unsigned long *prologue = NULL;
+
+ /* _switch_to is a special leaf function */
+ if (pc != (unsigned long) &_switch_to)
+ prologue = find_frame_creation((unsigned long *)pc);
+
+ if (prologue) {
+ long frame_size = get_frame_size(*prologue);
+
+ *pprev_fp = fp + frame_size;
+ *pprev_pc = *(unsigned long *)fp;
+ } else {
+ if (!leaf_return)
+ return -EINVAL;
+ *pprev_pc = leaf_return;
+ *pprev_fp = fp;
+ }
+
+ /* NOTE: don't check kernel_text_address here, to allow display
+ * of userland return address
+ */
+ return (!*pprev_pc || (*pprev_pc & 3)) ? -EINVAL : 0;
+}
+
+static void microblaze_unwind_inner(struct task_struct *task,
+ unsigned long pc, unsigned long fp,
+ unsigned long leaf_return,
+ struct stack_trace *trace,
+ const char *loglvl);
+
+/**
+ * unwind_trap - Unwind through a system trap, that stored previous state
+ * on the stack.
+ */
+static inline void unwind_trap(struct task_struct *task, unsigned long pc,
+ unsigned long fp, struct stack_trace *trace,
+ const char *loglvl)
+{
+ /* To be implemented */
+}
+
+/**
+ * microblaze_unwind_inner - Unwind the stack from the specified point
+ * @task : Task whose stack we are to unwind (may be NULL)
+ * @pc : Program counter from which we start unwinding
+ * @fp : Frame (stack) pointer from which we start unwinding
+ * @leaf_return : Value of r15 at pc. If the function is a leaf, this is
+ * the caller's return address.
+ * @trace : Where to store stack backtrace (PC values).
+ * NULL == print backtrace to kernel log
+ * @loglvl : Used for printk log level if (trace == NULL).
+ */
+static void microblaze_unwind_inner(struct task_struct *task,
+ unsigned long pc, unsigned long fp,
+ unsigned long leaf_return,
+ struct stack_trace *trace,
+ const char *loglvl)
+{
+ int ofs = 0;
+
+ pr_debug(" Unwinding with PC=%p, FP=%p\n", (void *)pc, (void *)fp);
+ if (!pc || !fp || (pc & 3) || (fp & 3)) {
+ pr_debug(" Invalid state for unwind, aborting\n");
+ return;
+ }
+ for (; pc != 0;) {
+ unsigned long next_fp, next_pc = 0;
+ unsigned long return_to = pc + 2 * sizeof(unsigned long);
+ const struct trap_handler_info *handler =
+ &microblaze_trap_handlers;
+
+ /* Is previous function the HW exception handler? */
+ if ((return_to >= (unsigned long)&_hw_exception_handler)
+ &&(return_to < (unsigned long)&ex_handler_unhandled)) {
+ /*
+ * HW exception handler doesn't save all registers,
+ * so we open-code a special case of unwind_trap()
+ */
+ printk("%sHW EXCEPTION\n", loglvl);
+ return;
+ }
+
+ /* Is previous function a trap handler? */
+ for (; handler->start_addr; ++handler) {
+ if ((return_to >= handler->start_addr)
+ && (return_to <= handler->end_addr)) {
+ if (!trace)
+ printk("%s%s\n", loglvl, handler->trap_name);
+ unwind_trap(task, pc, fp, trace, loglvl);
+ return;
+ }
+ }
+ pc -= ofs;
+
+ if (trace) {
+#ifdef CONFIG_STACKTRACE
+ if (trace->skip > 0)
+ trace->skip--;
+ else
+ trace->entries[trace->nr_entries++] = pc;
+
+ if (trace->nr_entries >= trace->max_entries)
+ break;
+#endif
+ } else {
+ /* Have we reached userland? */
+ if (unlikely(pc == task_pt_regs(task)->pc)) {
+ printk("%s[<%p>] PID %lu [%s]\n",
+ loglvl, (void *) pc,
+ (unsigned long) task->pid,
+ task->comm);
+ break;
+ } else
+ print_ip_sym(loglvl, pc);
+ }
+
+ /* Stop when we reach anything not part of the kernel */
+ if (!kernel_text_address(pc))
+ break;
+
+ if (lookup_prev_stack_frame(fp, pc, leaf_return, &next_fp,
+ &next_pc) == 0) {
+ ofs = sizeof(unsigned long);
+ pc = next_pc & ~3;
+ fp = next_fp;
+ leaf_return = 0;
+ } else {
+ pr_debug(" Failed to find previous stack frame\n");
+ break;
+ }
+
+ pr_debug(" Next PC=%p, next FP=%p\n",
+ (void *)next_pc, (void *)next_fp);
+ }
+}
+
+/**
+ * microblaze_unwind - Stack unwinder for Microblaze (external entry point)
+ * @task : Task whose stack we are to unwind (NULL == current)
+ * @trace : Where to store stack backtrace (PC values).
+ * NULL == print backtrace to kernel log
+ * @loglvl : Used for printk log level if (trace == NULL).
+ */
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace,
+ const char *loglvl)
+{
+ if (task) {
+ if (task == current) {
+ const struct pt_regs *regs = task_pt_regs(task);
+ microblaze_unwind_inner(task, regs->pc, regs->r1,
+ regs->r15, trace, loglvl);
+ } else {
+ struct thread_info *thread_info =
+ (struct thread_info *)(task->stack);
+ const struct cpu_context *cpu_context =
+ &thread_info->cpu_context;
+
+ microblaze_unwind_inner(task,
+ (unsigned long) &_switch_to,
+ cpu_context->r1,
+ cpu_context->r15,
+ trace, loglvl);
+ }
+ } else {
+ unsigned long pc, fp;
+
+ __asm__ __volatile__ ("or %0, r1, r0" : "=r" (fp));
+
+ __asm__ __volatile__ (
+ "brlid %0, 0f;"
+ "nop;"
+ "0:"
+ : "=r" (pc)
+ );
+
+ /* Since we are not a leaf function, use leaf_return = 0 */
+ microblaze_unwind_inner(current, pc, fp, 0, trace, loglvl);
+ }
+}
+
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
new file mode 100644
index 0000000000..ae50d3d04a
--- /dev/null
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(microblaze_start)
+
+#define RO_EXCEPTION_TABLE_ALIGN 16
+
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+
+#ifdef __MICROBLAZEEL__
+jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
+
+SECTIONS {
+ . = CONFIG_KERNEL_START;
+ microblaze_start = CONFIG_KERNEL_BASE_ADDR;
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ _text = . ;
+ _stext = . ;
+ HEAD_TEXT
+ TEXT_TEXT
+ *(.fixup)
+ EXIT_TEXT
+ EXIT_CALL
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ . = ALIGN (4) ;
+ _etext = . ;
+ }
+
+ . = ALIGN (8) ;
+ __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) {
+ _fdt_start = . ; /* place for fdt blob */
+ *(__fdt_blob) ; /* Any link-placed DTB */
+ . = _fdt_start + 0x10000; /* Pad up to 64kbyte */
+ _fdt_end = . ;
+ }
+
+ . = ALIGN(16);
+ RO_DATA(4096)
+
+ /*
+ * sdata2 section can go anywhere, but must be word aligned
+ * and SDA2_BASE must point to the middle of it
+ */
+ .sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) {
+ _ssrw = .;
+ . = ALIGN(PAGE_SIZE); /* page aligned when MMU used */
+ *(.sdata2)
+ . = ALIGN(8);
+ _essrw = .;
+ _ssrw_size = _essrw - _ssrw;
+ _KERNEL_SDA2_BASE_ = _ssrw + (_ssrw_size / 2);
+ }
+
+ _sdata = . ;
+ RW_DATA(32, PAGE_SIZE, THREAD_SIZE)
+ _edata = . ;
+
+ /* Under the microblaze ABI, .sdata and .sbss must be contiguous */
+ . = ALIGN(8);
+ .sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {
+ _ssro = .;
+ *(.sdata)
+ }
+
+ .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {
+ _ssbss = .;
+ *(.sbss)
+ _esbss = .;
+ _essro = .;
+ _ssro_size = _essro - _ssro ;
+ _KERNEL_SDA_BASE_ = _ssro + (_ssro_size / 2) ;
+ }
+
+ PERCPU_SECTION(L1_CACHE_BYTES)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+
+ INIT_TEXT_SECTION(PAGE_SIZE)
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(4);
+ .init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) {
+ __ivt_start = .;
+ *(.init.ivt)
+ __ivt_end = .;
+ }
+
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ INIT_SETUP(0)
+ }
+
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) {
+ INIT_CALLS
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ CON_INITCALL
+ }
+
+ __init_end_before_initramfs = .;
+
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ INIT_RAM_FS
+ }
+
+ __init_end = .;
+
+ .bss ALIGN (PAGE_SIZE) : AT(ADDR(.bss) - LOAD_OFFSET) {
+ /* page aligned when MMU used */
+ __bss_start = . ;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN (4) ;
+ __bss_stop = . ;
+ }
+ . = ALIGN(PAGE_SIZE);
+ _end = .;
+
+ DISCARDS
+}
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
new file mode 100644
index 0000000000..9fe7ab688c
--- /dev/null
+++ b/arch/microblaze/lib/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile
+#
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ashldi3.o = -pg
+CFLAGS_REMOVE_ashrdi3.o = -pg
+CFLAGS_REMOVE_lshrdi3.o = -pg
+endif
+
+lib-y := memset.o
+
+ifeq ($(CONFIG_OPT_LIB_ASM),y)
+lib-y += fastcopy.o
+else
+lib-y += memcpy.o memmove.o
+endif
+
+lib-y += uaccess_old.o
+
+# libgcc-style stuff needed in the kernel
+obj-y += ashldi3.o ashrdi3.o cmpdi2.o divsi3.o lshrdi3.o modsi3.o
+obj-y += muldi3.o mulsi3.o ucmpdi2.o udivsi3.o umodsi3.o
diff --git a/arch/microblaze/lib/ashldi3.c b/arch/microblaze/lib/ashldi3.c
new file mode 100644
index 0000000000..4d0f9481bd
--- /dev/null
+++ b/arch/microblaze/lib/ashldi3.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+ DWunion uu, w;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+ bm = 32 - b;
+
+ if (bm <= 0) {
+ w.s.low = 0;
+ w.s.high = (unsigned int) uu.s.low << -bm;
+ } else {
+ const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+ w.s.low = (unsigned int) uu.s.low << b;
+ w.s.high = ((unsigned int) uu.s.high << b) | carries;
+ }
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/microblaze/lib/ashrdi3.c b/arch/microblaze/lib/ashrdi3.c
new file mode 100644
index 0000000000..268098a962
--- /dev/null
+++ b/arch/microblaze/lib/ashrdi3.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+ DWunion uu, w;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+ bm = 32 - b;
+
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high =
+ uu.s.high >> 31;
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/microblaze/lib/cmpdi2.c b/arch/microblaze/lib/cmpdi2.c
new file mode 100644
index 0000000000..b3f8963851
--- /dev/null
+++ b/arch/microblaze/lib/cmpdi2.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+ const DWunion au = {
+ .ll = a
+ };
+ const DWunion bu = {
+ .ll = b
+ };
+
+ if (au.s.high < bu.s.high)
+ return 0;
+ else if (au.s.high > bu.s.high)
+ return 2;
+
+ if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+ return 0;
+ else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+ return 2;
+
+ return 1;
+}
+EXPORT_SYMBOL(__cmpdi2);
diff --git a/arch/microblaze/lib/divsi3.S b/arch/microblaze/lib/divsi3.S
new file mode 100644
index 0000000000..919fb69f85
--- /dev/null
+++ b/arch/microblaze/lib/divsi3.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+* Divide operation for 32 bit integers.
+* Input : Dividend in Reg r5
+* Divisor in Reg r6
+* Output: Result in Reg r3
+*/
+ .text
+ .globl __divsi3
+ .type __divsi3, @function
+ .ent __divsi3
+__divsi3:
+ .frame r1, 0, r15
+
+ addik r1, r1, -16
+ swi r28, r1, 0
+ swi r29, r1, 4
+ swi r30, r1, 8
+ swi r31, r1, 12
+
+ beqi r6, div_by_zero /* div_by_zero - division error */
+ beqi r5, result_is_zero /* result is zero */
+ bgeid r5, r5_pos
+ xor r28, r5, r6 /* get the sign of the result */
+ rsubi r5, r5, 0 /* make r5 positive */
+r5_pos:
+ bgei r6, r6_pos
+ rsubi r6, r6, 0 /* make r6 positive */
+r6_pos:
+ addik r30, r0, 0 /* clear mod */
+ addik r3, r0, 0 /* clear div */
+ addik r29, r0, 32 /* initialize the loop count */
+
+ /* first part try to find the first '1' in the r5 */
+div0:
+ blti r5, div2 /* this traps r5 == 0x80000000 */
+div1:
+ add r5, r5, r5 /* left shift logical r5 */
+ bgtid r5, div1
+ addik r29, r29, -1
+div2:
+ /* left shift logical r5 get the '1' into the carry */
+ add r5, r5, r5
+ addc r30, r30, r30 /* move that bit into the mod register */
+ rsub r31, r6, r30 /* try to subtract (r30 a r6) */
+ blti r31, mod_too_small
+ /* move the r31 to mod since the result was positive */
+ or r30, r0, r31
+ addik r3, r3, 1
+mod_too_small:
+ addik r29, r29, -1
+ beqi r29, loop_end
+ add r3, r3, r3 /* shift in the '1' into div */
+ bri div2 /* div2 */
+loop_end:
+ bgei r28, return_here
+ brid return_here
+ rsubi r3, r3, 0 /* negate the result */
+div_by_zero:
+result_is_zero:
+ or r3, r0, r0 /* set result to 0 */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+ lwi r28, r1, 0
+ lwi r29, r1, 4
+ lwi r30, r1, 8
+ lwi r31, r1, 12
+ rtsd r15, 8
+ addik r1, r1, 16
+
+.size __divsi3, . - __divsi3
+.end __divsi3
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
new file mode 100644
index 0000000000..fdc48bb065
--- /dev/null
+++ b/arch/microblaze/lib/fastcopy.S
@@ -0,0 +1,666 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2008 Jim Law - Iris LP All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Jim Law <jlaw@irispower.com>
+ *
+ * intended to replace:
+ * memcpy in memcpy.c and
+ * memmove in memmove.c
+ * ... in arch/microblaze/lib
+ *
+ *
+ * assly_fastcopy.S
+ *
+ * Attempt at quicker memcpy and memmove for MicroBlaze
+ * Input : Operand1 in Reg r5 - destination address
+ * Operand2 in Reg r6 - source address
+ * Operand3 in Reg r7 - number of bytes to transfer
+ * Output: Result in Reg r3 - starting destinaition address
+ *
+ *
+ * Explanation:
+ * Perform (possibly unaligned) copy of a block of memory
+ * between mem locations with size of xfer spec'd in bytes
+ */
+
+#include <linux/linkage.h>
+ .text
+ .globl memcpy
+ .type memcpy, @function
+ .ent memcpy
+
+memcpy:
+fast_memcpy_ascending:
+ /* move d to return register as value of function */
+ addi r3, r5, 0
+
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4, a_xfer_end /* if n < 0, less than one word to transfer */
+
+ /* transfer first 0~3 bytes to get aligned dest address */
+ andi r4, r5, 3 /* n = d & 3 */
+ /* if zero, destination already aligned */
+ beqi r4, a_dalign_done
+ /* n = 4 - n (yields 3, 2, 1 transfers for 1, 2, 3 addr offset) */
+ rsubi r4, r4, 4
+ rsub r7, r4, r7 /* c = c - n adjust c */
+
+a_xfer_first_loop:
+ /* if no bytes left to transfer, transfer the bulk */
+ beqi r4, a_dalign_done
+ lbui r11, r6, 0 /* h = *s */
+ sbi r11, r5, 0 /* *d = h */
+ addi r6, r6, 1 /* s++ */
+ addi r5, r5, 1 /* d++ */
+ brid a_xfer_first_loop /* loop */
+ addi r4, r4, -1 /* n-- (IN DELAY SLOT) */
+
+a_dalign_done:
+ addi r4, r0, 32 /* n = 32 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ /* if n < 0, less than one block to transfer */
+ blti r4, a_block_done
+
+a_block_xfer:
+ andi r4, r7, 0xffffffe0 /* n = c & ~31 */
+ rsub r7, r4, r7 /* c = c - n */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, a_block_unaligned
+
+a_block_aligned:
+ lwi r9, r6, 0 /* t1 = *(s + 0) */
+ lwi r10, r6, 4 /* t2 = *(s + 4) */
+ lwi r11, r6, 8 /* t3 = *(s + 8) */
+ lwi r12, r6, 12 /* t4 = *(s + 12) */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ swi r10, r5, 4 /* *(d + 4) = t2 */
+ swi r11, r5, 8 /* *(d + 8) = t3 */
+ swi r12, r5, 12 /* *(d + 12) = t4 */
+ lwi r9, r6, 16 /* t1 = *(s + 16) */
+ lwi r10, r6, 20 /* t2 = *(s + 20) */
+ lwi r11, r6, 24 /* t3 = *(s + 24) */
+ lwi r12, r6, 28 /* t4 = *(s + 28) */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ swi r10, r5, 20 /* *(d + 20) = t2 */
+ swi r11, r5, 24 /* *(d + 24) = t3 */
+ swi r12, r5, 28 /* *(d + 28) = t4 */
+ addi r6, r6, 32 /* s = s + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_block_aligned /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+ bri a_block_done
+
+a_block_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ add r6, r6, r4 /* s = s + n */
+ lwi r11, r8, 0 /* h = *(as + 0) */
+
+ addi r9, r9, -1
+ beqi r9, a_block_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9, a_block_u2 /* t1 was 2 => 2 byte offset */
+
+a_block_u3:
+ bslli r11, r11, 24 /* h = h << 24 */
+a_bu3_loop:
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 32 /* v = *(as + 32) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ addi r8, r8, 32 /* as = as + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_bu3_loop /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+ bri a_block_done
+
+a_block_u1:
+ bslli r11, r11, 8 /* h = h << 8 */
+a_bu1_loop:
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 32 /* v = *(as + 32) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ addi r8, r8, 32 /* as = as + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_bu1_loop /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+ bri a_block_done
+
+a_block_u2:
+ bslli r11, r11, 16 /* h = h << 16 */
+a_bu2_loop:
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 32 /* v = *(as + 32) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ addi r8, r8, 32 /* as = as + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_bu2_loop /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+
+a_block_done:
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4, a_xfer_end /* if n < 0, less than one word to transfer */
+
+a_word_xfer:
+ andi r4, r7, 0xfffffffc /* n = c & ~3 */
+ addi r10, r0, 0 /* offset = 0 */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, a_word_unaligned
+
+a_word_aligned:
+ lw r9, r6, r10 /* t1 = *(s+offset) */
+ sw r9, r5, r10 /* *(d+offset) = t1 */
+ addi r4, r4,-4 /* n-- */
+ bneid r4, a_word_aligned /* loop */
+ addi r10, r10, 4 /* offset++ (IN DELAY SLOT) */
+
+ bri a_word_done
+
+a_word_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ lwi r11, r8, 0 /* h = *(as + 0) */
+ addi r8, r8, 4 /* as = as + 4 */
+
+ addi r9, r9, -1
+ beqi r9, a_word_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9, a_word_u2 /* t1 was 2 => 2 byte offset */
+
+a_word_u3:
+ bslli r11, r11, 24 /* h = h << 24 */
+a_wu3_loop:
+ lw r12, r8, r10 /* v = *(as + offset) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r10 /* *(d + offset) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ addi r4, r4,-4 /* n = n - 4 */
+ bneid r4, a_wu3_loop /* while (n) loop */
+ addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */
+
+ bri a_word_done
+
+a_word_u1:
+ bslli r11, r11, 8 /* h = h << 8 */
+a_wu1_loop:
+ lw r12, r8, r10 /* v = *(as + offset) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r10 /* *(d + offset) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ addi r4, r4,-4 /* n = n - 4 */
+ bneid r4, a_wu1_loop /* while (n) loop */
+ addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */
+
+ bri a_word_done
+
+a_word_u2:
+ bslli r11, r11, 16 /* h = h << 16 */
+a_wu2_loop:
+ lw r12, r8, r10 /* v = *(as + offset) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r10 /* *(d + offset) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ addi r4, r4,-4 /* n = n - 4 */
+ bneid r4, a_wu2_loop /* while (n) loop */
+ addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */
+
+a_word_done:
+ add r5, r5, r10 /* d = d + offset */
+ add r6, r6, r10 /* s = s + offset */
+ rsub r7, r10, r7 /* c = c - offset */
+
+a_xfer_end:
+a_xfer_end_loop:
+ beqi r7, a_done /* while (c) */
+ lbui r9, r6, 0 /* t1 = *s */
+ addi r6, r6, 1 /* s++ */
+ sbi r9, r5, 0 /* *d = t1 */
+ addi r7, r7, -1 /* c-- */
+ brid a_xfer_end_loop /* loop */
+ addi r5, r5, 1 /* d++ (IN DELAY SLOT) */
+
+a_done:
+ rtsd r15, 8
+ nop
+
+.size memcpy, . - memcpy
+.end memcpy
+/*----------------------------------------------------------------------------*/
+ .globl memmove
+ .type memmove, @function
+ .ent memmove
+
+memmove:
+ cmpu r4, r5, r6 /* n = s - d */
+ bgei r4,fast_memcpy_ascending
+
+fast_memcpy_descending:
+ /* move d to return register as value of function */
+ addi r3, r5, 0
+
+ add r5, r5, r7 /* d = d + c */
+ add r6, r6, r7 /* s = s + c */
+
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4,d_xfer_end /* if n < 0, less than one word to transfer */
+
+ /* transfer first 0~3 bytes to get aligned dest address */
+ andi r4, r5, 3 /* n = d & 3 */
+ /* if zero, destination already aligned */
+ beqi r4,d_dalign_done
+ rsub r7, r4, r7 /* c = c - n adjust c */
+
+d_xfer_first_loop:
+ /* if no bytes left to transfer, transfer the bulk */
+ beqi r4,d_dalign_done
+ addi r6, r6, -1 /* s-- */
+ addi r5, r5, -1 /* d-- */
+ lbui r11, r6, 0 /* h = *s */
+ sbi r11, r5, 0 /* *d = h */
+ brid d_xfer_first_loop /* loop */
+ addi r4, r4, -1 /* n-- (IN DELAY SLOT) */
+
+d_dalign_done:
+ addi r4, r0, 32 /* n = 32 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ /* if n < 0, less than one block to transfer */
+ blti r4, d_block_done
+
+d_block_xfer:
+ andi r4, r7, 0xffffffe0 /* n = c & ~31 */
+ rsub r7, r4, r7 /* c = c - n */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, d_block_unaligned
+
+d_block_aligned:
+ addi r6, r6, -32 /* s = s - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r9, r6, 28 /* t1 = *(s + 28) */
+ lwi r10, r6, 24 /* t2 = *(s + 24) */
+ lwi r11, r6, 20 /* t3 = *(s + 20) */
+ lwi r12, r6, 16 /* t4 = *(s + 16) */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ swi r10, r5, 24 /* *(d + 24) = t2 */
+ swi r11, r5, 20 /* *(d + 20) = t3 */
+ swi r12, r5, 16 /* *(d + 16) = t4 */
+ lwi r9, r6, 12 /* t1 = *(s + 12) */
+ lwi r10, r6, 8 /* t2 = *(s + 8) */
+ lwi r11, r6, 4 /* t3 = *(s + 4) */
+ lwi r12, r6, 0 /* t4 = *(s + 0) */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ swi r10, r5, 8 /* *(d + 8) = t2 */
+ swi r11, r5, 4 /* *(d + 4) = t3 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_block_aligned /* while (n) loop */
+ swi r12, r5, 0 /* *(d + 0) = t4 (IN DELAY SLOT) */
+ bri d_block_done
+
+d_block_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ rsub r6, r4, r6 /* s = s - n */
+ lwi r11, r8, 0 /* h = *(as + 0) */
+
+ addi r9, r9, -1
+ beqi r9,d_block_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9,d_block_u2 /* t1 was 2 => 2 byte offset */
+
+d_block_u3:
+ bsrli r11, r11, 8 /* h = h >> 8 */
+d_bu3_loop:
+ addi r8, r8, -32 /* as = as - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 112) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 0 /* v = *(as + 0) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_bu3_loop /* while (n) loop */
+ bsrli r11, r12, 8 /* h = v >> 8 (IN DELAY SLOT) */
+ bri d_block_done
+
+d_block_u1:
+ bsrli r11, r11, 24 /* h = h >> 24 */
+d_bu1_loop:
+ addi r8, r8, -32 /* as = as - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 112) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 0 /* v = *(as + 0) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_bu1_loop /* while (n) loop */
+ bsrli r11, r12, 24 /* h = v >> 24 (IN DELAY SLOT) */
+ bri d_block_done
+
+d_block_u2:
+ bsrli r11, r11, 16 /* h = h >> 16 */
+d_bu2_loop:
+ addi r8, r8, -32 /* as = as - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 112) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 0 /* v = *(as + 0) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_bu2_loop /* while (n) loop */
+ bsrli r11, r12, 16 /* h = v >> 16 (IN DELAY SLOT) */
+
+d_block_done:
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4,d_xfer_end /* if n < 0, less than one word to transfer */
+
+d_word_xfer:
+ andi r4, r7, 0xfffffffc /* n = c & ~3 */
+ rsub r5, r4, r5 /* d = d - n */
+ rsub r6, r4, r6 /* s = s - n */
+ rsub r7, r4, r7 /* c = c - n */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, d_word_unaligned
+
+d_word_aligned:
+ addi r4, r4,-4 /* n-- */
+ lw r9, r6, r4 /* t1 = *(s+n) */
+ bneid r4, d_word_aligned /* loop */
+ sw r9, r5, r4 /* *(d+n) = t1 (IN DELAY SLOT) */
+
+ bri d_word_done
+
+d_word_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ lw r11, r8, r4 /* h = *(as + n) */
+
+ addi r9, r9, -1
+ beqi r9,d_word_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9,d_word_u2 /* t1 was 2 => 2 byte offset */
+
+d_word_u3:
+ bsrli r11, r11, 8 /* h = h >> 8 */
+d_wu3_loop:
+ addi r4, r4,-4 /* n = n - 4 */
+ lw r12, r8, r4 /* v = *(as + n) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r4 /* *(d + n) = t1 */
+ bneid r4, d_wu3_loop /* while (n) loop */
+ bsrli r11, r12, 8 /* h = v >> 8 (IN DELAY SLOT) */
+
+ bri d_word_done
+
+d_word_u1:
+ bsrli r11, r11, 24 /* h = h >> 24 */
+d_wu1_loop:
+ addi r4, r4,-4 /* n = n - 4 */
+ lw r12, r8, r4 /* v = *(as + n) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r4 /* *(d + n) = t1 */
+ bneid r4, d_wu1_loop /* while (n) loop */
+ bsrli r11, r12, 24 /* h = v >> 24 (IN DELAY SLOT) */
+
+ bri d_word_done
+
+d_word_u2:
+ bsrli r11, r11, 16 /* h = h >> 16 */
+d_wu2_loop:
+ addi r4, r4,-4 /* n = n - 4 */
+ lw r12, r8, r4 /* v = *(as + n) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r4 /* *(d + n) = t1 */
+ bneid r4, d_wu2_loop /* while (n) loop */
+ bsrli r11, r12, 16 /* h = v >> 16 (IN DELAY SLOT) */
+
+d_word_done:
+
+d_xfer_end:
+d_xfer_end_loop:
+ beqi r7, a_done /* while (c) */
+ addi r6, r6, -1 /* s-- */
+ lbui r9, r6, 0 /* t1 = *s */
+ addi r5, r5, -1 /* d-- */
+ sbi r9, r5, 0 /* *d = t1 */
+ brid d_xfer_end_loop /* loop */
+ addi r7, r7, -1 /* c-- (IN DELAY SLOT) */
+
+d_done:
+ rtsd r15, 8
+ nop
+
+.size memmove, . - memmove
+.end memmove
diff --git a/arch/microblaze/lib/libgcc.h b/arch/microblaze/lib/libgcc.h
new file mode 100644
index 0000000000..a909366c20
--- /dev/null
+++ b/arch/microblaze/lib/libgcc.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#ifdef __BIG_ENDIAN
+struct DWstruct {
+ int high, low;
+};
+#elif defined(__LITTLE_ENDIAN)
+struct DWstruct {
+ int low, high;
+};
+#else
+#error I feel sick.
+#endif
+
+typedef union {
+ struct DWstruct s;
+ long long ll;
+} DWunion;
+
+extern long long __ashldi3(long long u, word_type b);
+extern long long __ashrdi3(long long u, word_type b);
+extern word_type __cmpdi2(long long a, long long b);
+extern long long __lshrdi3(long long u, word_type b);
+extern long long __muldi3(long long u, long long v);
+extern word_type __ucmpdi2(unsigned long long a, unsigned long long b);
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/microblaze/lib/lshrdi3.c b/arch/microblaze/lib/lshrdi3.c
new file mode 100644
index 0000000000..00eb826822
--- /dev/null
+++ b/arch/microblaze/lib/lshrdi3.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+ DWunion uu, w;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+ bm = 32 - b;
+
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (unsigned int) uu.s.high >> -bm;
+ } else {
+ const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+ w.s.high = (unsigned int) uu.s.high >> b;
+ w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
new file mode 100644
index 0000000000..9966dce556
--- /dev/null
+++ b/arch/microblaze/lib/memcpy.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccessfully, to contact the original
+ * author of this code (Michael Morrow, Intel). Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+
+#include <linux/string.h>
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+ const char *src = v_src;
+ char *dst = v_dst;
+
+ /* The following code tries to optimize the copy by using unsigned
+ * alignment. This will work fine if both source and destination are
+ * aligned on the same boundary. However, if they are aligned on
+ * different boundaries shifts will be necessary. This might result in
+ * bad performance on MicroBlaze systems without a barrel shifter.
+ */
+ const uint32_t *i_src;
+ uint32_t *i_dst;
+
+ if (likely(c >= 4)) {
+ unsigned value, buf_hold;
+
+ /* Align the destination to a word boundary. */
+ /* This is done in an endian independent manner. */
+ switch ((unsigned long)dst & 3) {
+ case 1:
+ *dst++ = *src++;
+ --c;
+ fallthrough;
+ case 2:
+ *dst++ = *src++;
+ --c;
+ fallthrough;
+ case 3:
+ *dst++ = *src++;
+ --c;
+ }
+
+ i_dst = (void *)dst;
+
+ /* Choose a copy scheme based on the source */
+ /* alignment relative to destination. */
+ switch ((unsigned long)src & 3) {
+ case 0x0: /* Both byte offsets are aligned */
+ i_src = (const void *)src;
+
+ for (; c >= 4; c -= 4)
+ *i_dst++ = *i_src++;
+
+ src = (const void *)i_src;
+ break;
+ case 0x1: /* Unaligned - Off by 1 */
+ /* Word align the source */
+ i_src = (const void *) ((unsigned)src & ~3);
+#ifndef __MICROBLAZEEL__
+ /* Load the holding buffer */
+ buf_hold = *i_src++ << 8;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | value >> 24;
+ buf_hold = value << 8;
+ }
+#else
+ /* Load the holding buffer */
+ buf_hold = (*i_src++ & 0xFFFFFF00) >> 8;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | ((value & 0xFF) << 24);
+ buf_hold = (value & 0xFFFFFF00) >> 8;
+ }
+#endif
+ /* Realign the source */
+ src = (const void *)i_src;
+ src -= 3;
+ break;
+ case 0x2: /* Unaligned - Off by 2 */
+ /* Word align the source */
+ i_src = (const void *) ((unsigned)src & ~3);
+#ifndef __MICROBLAZEEL__
+ /* Load the holding buffer */
+ buf_hold = *i_src++ << 16;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | value >> 16;
+ buf_hold = value << 16;
+ }
+#else
+ /* Load the holding buffer */
+ buf_hold = (*i_src++ & 0xFFFF0000) >> 16;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | ((value & 0xFFFF) << 16);
+ buf_hold = (value & 0xFFFF0000) >> 16;
+ }
+#endif
+ /* Realign the source */
+ src = (const void *)i_src;
+ src -= 2;
+ break;
+ case 0x3: /* Unaligned - Off by 3 */
+ /* Word align the source */
+ i_src = (const void *) ((unsigned)src & ~3);
+#ifndef __MICROBLAZEEL__
+ /* Load the holding buffer */
+ buf_hold = *i_src++ << 24;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | value >> 8;
+ buf_hold = value << 24;
+ }
+#else
+ /* Load the holding buffer */
+ buf_hold = (*i_src++ & 0xFF000000) >> 24;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | ((value & 0xFFFFFF) << 8);
+ buf_hold = (value & 0xFF000000) >> 24;
+ }
+#endif
+ /* Realign the source */
+ src = (const void *)i_src;
+ src -= 1;
+ break;
+ }
+ dst = (void *)i_dst;
+ }
+
+ /* Finish off any remaining bytes */
+ /* simple fast copy, ... unless a cache boundary is crossed */
+ switch (c) {
+ case 3:
+ *dst++ = *src++;
+ fallthrough;
+ case 2:
+ *dst++ = *src++;
+ fallthrough;
+ case 1:
+ *dst++ = *src++;
+ }
+
+ return v_dst;
+}
+EXPORT_SYMBOL(memcpy);
+#endif /* CONFIG_OPT_LIB_FUNCTION */
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
new file mode 100644
index 0000000000..c1f08c484e
--- /dev/null
+++ b/arch/microblaze/lib/memmove.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memmove.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccessfully, to contact the original
+ * author of this code (Michael Morrow, Intel). Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/string.h>
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+ const char *src = v_src;
+ char *dst = v_dst;
+ const uint32_t *i_src;
+ uint32_t *i_dst;
+
+ if (!c)
+ return v_dst;
+
+ /* Use memcpy when source is higher than dest */
+ if (v_dst <= v_src)
+ return memcpy(v_dst, v_src, c);
+
+ /* The following code tries to optimize the copy by using unsigned
+ * alignment. This will work fine if both source and destination are
+ * aligned on the same boundary. However, if they are aligned on
+ * different boundaries shifts will be necessary. This might result in
+ * bad performance on MicroBlaze systems without a barrel shifter.
+ */
+ /* FIXME this part needs more test */
+ /* Do a descending copy - this is a bit trickier! */
+ dst += c;
+ src += c;
+
+ if (c >= 4) {
+ unsigned value, buf_hold;
+
+ /* Align the destination to a word boundary. */
+ /* This is done in an endian independent manner. */
+
+ switch ((unsigned long)dst & 3) {
+ case 3:
+ *--dst = *--src;
+ --c;
+ fallthrough;
+ case 2:
+ *--dst = *--src;
+ --c;
+ fallthrough;
+ case 1:
+ *--dst = *--src;
+ --c;
+ }
+
+ i_dst = (void *)dst;
+ /* Choose a copy scheme based on the source */
+ /* alignment relative to destination. */
+ switch ((unsigned long)src & 3) {
+ case 0x0: /* Both byte offsets are aligned */
+
+ i_src = (const void *)src;
+
+ for (; c >= 4; c -= 4)
+ *--i_dst = *--i_src;
+
+ src = (const void *)i_src;
+ break;
+ case 0x1: /* Unaligned - Off by 1 */
+ /* Word align the source */
+ i_src = (const void *) (((unsigned)src + 4) & ~3);
+#ifndef __MICROBLAZEEL__
+ /* Load the holding buffer */
+ buf_hold = *--i_src >> 24;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold << 8 | value;
+ buf_hold = value >> 24;
+ }
+#else
+ /* Load the holding buffer */
+ buf_hold = (*--i_src & 0xFF) << 24;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold |
+ ((value & 0xFFFFFF00) >> 8);
+ buf_hold = (value & 0xFF) << 24;
+ }
+#endif
+ /* Realign the source */
+ src = (const void *)i_src;
+ src += 1;
+ break;
+ case 0x2: /* Unaligned - Off by 2 */
+ /* Word align the source */
+ i_src = (const void *) (((unsigned)src + 4) & ~3);
+#ifndef __MICROBLAZEEL__
+ /* Load the holding buffer */
+ buf_hold = *--i_src >> 16;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold << 16 | value;
+ buf_hold = value >> 16;
+ }
+#else
+ /* Load the holding buffer */
+ buf_hold = (*--i_src & 0xFFFF) << 16;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold |
+ ((value & 0xFFFF0000) >> 16);
+ buf_hold = (value & 0xFFFF) << 16;
+ }
+#endif
+ /* Realign the source */
+ src = (const void *)i_src;
+ src += 2;
+ break;
+ case 0x3: /* Unaligned - Off by 3 */
+ /* Word align the source */
+ i_src = (const void *) (((unsigned)src + 4) & ~3);
+#ifndef __MICROBLAZEEL__
+ /* Load the holding buffer */
+ buf_hold = *--i_src >> 8;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold << 24 | value;
+ buf_hold = value >> 8;
+ }
+#else
+ /* Load the holding buffer */
+ buf_hold = (*--i_src & 0xFFFFFF) << 8;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold |
+ ((value & 0xFF000000) >> 24);
+ buf_hold = (value & 0xFFFFFF) << 8;
+ }
+#endif
+ /* Realign the source */
+ src = (const void *)i_src;
+ src += 3;
+ break;
+ }
+ dst = (void *)i_dst;
+ }
+
+ /* simple fast copy, ... unless a cache boundary is crossed */
+ /* Finish off any remaining bytes */
+ switch (c) {
+ case 4:
+ *--dst = *--src;
+ fallthrough;
+ case 3:
+ *--dst = *--src;
+ fallthrough;
+ case 2:
+ *--dst = *--src;
+ fallthrough;
+ case 1:
+ *--dst = *--src;
+ }
+ return v_dst;
+}
+EXPORT_SYMBOL(memmove);
+#endif /* CONFIG_OPT_LIB_FUNCTION */
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
new file mode 100644
index 0000000000..7c2352d56b
--- /dev/null
+++ b/arch/microblaze/lib/memset.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memset on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccessfully, to contact the original
+ * author of this code (Michael Morrow, Intel). Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/string.h>
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+void *memset(void *v_src, int c, __kernel_size_t n)
+{
+ char *src = v_src;
+ uint32_t *i_src;
+ uint32_t w32 = 0;
+
+ /* Truncate c to 8 bits */
+ c = (c & 0xFF);
+
+ if (unlikely(c)) {
+ /* Make a repeating word out of it */
+ w32 = c;
+ w32 |= w32 << 8;
+ w32 |= w32 << 16;
+ }
+
+ if (likely(n >= 4)) {
+ /* Align the destination to a word boundary */
+ /* This is done in an endian independent manner */
+ switch ((unsigned) src & 3) {
+ case 1:
+ *src++ = c;
+ --n;
+ fallthrough;
+ case 2:
+ *src++ = c;
+ --n;
+ fallthrough;
+ case 3:
+ *src++ = c;
+ --n;
+ }
+
+ i_src = (void *)src;
+
+ /* Do as many full-word copies as we can */
+ for (; n >= 4; n -= 4)
+ *i_src++ = w32;
+
+ src = (void *)i_src;
+ }
+
+ /* Simple, byte oriented memset or the rest of count. */
+ switch (n) {
+ case 3:
+ *src++ = c;
+ fallthrough;
+ case 2:
+ *src++ = c;
+ fallthrough;
+ case 1:
+ *src++ = c;
+ break;
+ default:
+ break;
+ }
+
+ return v_src;
+}
+EXPORT_SYMBOL(memset);
+#endif /* CONFIG_OPT_LIB_FUNCTION */
diff --git a/arch/microblaze/lib/modsi3.S b/arch/microblaze/lib/modsi3.S
new file mode 100644
index 0000000000..64154865c1
--- /dev/null
+++ b/arch/microblaze/lib/modsi3.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+* modulo operation for 32 bit integers.
+* Input : op1 in Reg r5
+* op2 in Reg r6
+* Output: op1 mod op2 in Reg r3
+*/
+
+ .text
+ .globl __modsi3
+ .type __modsi3, @function
+ .ent __modsi3
+
+__modsi3:
+ .frame r1, 0, r15
+
+ addik r1, r1, -16
+ swi r28, r1, 0
+ swi r29, r1, 4
+ swi r30, r1, 8
+ swi r31, r1, 12
+
+ beqi r6, div_by_zero /* div_by_zero division error */
+ beqi r5, result_is_zero /* result is zero */
+ bgeid r5, r5_pos
+ /* get the sign of the result [ depends only on the first arg] */
+ add r28, r5, r0
+ rsubi r5, r5, 0 /* make r5 positive */
+r5_pos:
+ bgei r6, r6_pos
+ rsubi r6, r6, 0 /* make r6 positive */
+r6_pos:
+ addik r3, r0, 0 /* clear mod */
+ addik r30, r0, 0 /* clear div */
+ addik r29, r0, 32 /* initialize the loop count */
+/* first part try to find the first '1' in the r5 */
+div1:
+ add r5, r5, r5 /* left shift logical r5 */
+ bgeid r5, div1
+ addik r29, r29, -1
+div2:
+ /* left shift logical r5 get the '1' into the carry */
+ add r5, r5, r5
+ addc r3, r3, r3 /* move that bit into the mod register */
+ rsub r31, r6, r3 /* try to subtract (r30 a r6) */
+ blti r31, mod_too_small
+ /* move the r31 to mod since the result was positive */
+ or r3, r0, r31
+ addik r30, r30, 1
+mod_too_small:
+ addik r29, r29, -1
+ beqi r29, loop_end
+ add r30, r30, r30 /* shift in the '1' into div */
+ bri div2 /* div2 */
+loop_end:
+ bgei r28, return_here
+ brid return_here
+ rsubi r3, r3, 0 /* negate the result */
+div_by_zero:
+result_is_zero:
+ or r3, r0, r0 /* set result to 0 [both mod as well as div are 0] */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+ lwi r28, r1, 0
+ lwi r29, r1, 4
+ lwi r30, r1, 8
+ lwi r31, r1, 12
+ rtsd r15, 8
+ addik r1, r1, 16
+
+.size __modsi3, . - __modsi3
+.end __modsi3
diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c
new file mode 100644
index 0000000000..8e6bc17e2c
--- /dev/null
+++ b/arch/microblaze/lib/muldi3.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+#define W_TYPE_SIZE 32
+
+#define __ll_B ((unsigned long) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((unsigned long) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((unsigned long) (t) >> (W_TYPE_SIZE / 2))
+
+/* If we still don't have umul_ppmm, define it using plain C. */
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ unsigned long __x0, __x1, __x2, __x3; \
+ unsigned short __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart(u); \
+ __uh = __ll_highpart(u); \
+ __vl = __ll_lowpart(v); \
+ __vh = __ll_highpart(v); \
+ \
+ __x0 = (unsigned long) __ul * __vl; \
+ __x1 = (unsigned long) __ul * __vh; \
+ __x2 = (unsigned long) __uh * __vl; \
+ __x3 = (unsigned long) __uh * __vh; \
+ \
+ __x1 += __ll_highpart(__x0); /* this can't give carry */\
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_B; /* yes, add it in the proper pos */ \
+ \
+ (w1) = __x3 + __ll_highpart(__x1); \
+ (w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);\
+ } while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v) ({ \
+ DWunion __w; \
+ umul_ppmm(__w.s.high, __w.s.low, u, v); \
+ __w.ll; \
+ })
+#endif
+
+long long __muldi3(long long u, long long v)
+{
+ const DWunion uu = {.ll = u};
+ const DWunion vv = {.ll = v};
+ DWunion w = {.ll = __umulsidi3(uu.s.low, vv.s.low)};
+
+ w.s.high += ((unsigned long) uu.s.low * (unsigned long) vv.s.high
+ + (unsigned long) uu.s.high * (unsigned long) vv.s.low);
+
+ return w.ll;
+}
+EXPORT_SYMBOL(__muldi3);
diff --git a/arch/microblaze/lib/mulsi3.S b/arch/microblaze/lib/mulsi3.S
new file mode 100644
index 0000000000..d6703a4d91
--- /dev/null
+++ b/arch/microblaze/lib/mulsi3.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+ * Multiply operation for 32 bit integers.
+ * Input : Operand1 in Reg r5
+ * Operand2 in Reg r6
+ * Output: Result [op1 * op2] in Reg r3
+ */
+ .text
+ .globl __mulsi3
+ .type __mulsi3, @function
+ .ent __mulsi3
+
+__mulsi3:
+ .frame r1, 0, r15
+ add r3, r0, r0
+ beqi r5, result_is_zero /* multiply by zero */
+ beqi r6, result_is_zero /* multiply by zero */
+ bgeid r5, r5_pos
+ xor r4, r5, r6 /* get the sign of the result */
+ rsubi r5, r5, 0 /* make r5 positive */
+r5_pos:
+ bgei r6, r6_pos
+ rsubi r6, r6, 0 /* make r6 positive */
+r6_pos:
+ bri l1
+l2:
+ add r5, r5, r5
+l1:
+ srl r6, r6
+ addc r7, r0, r0
+ beqi r7, l2
+ bneid r6, l2
+ add r3, r3, r5
+ blti r4, negateresult
+ rtsd r15, 8
+ nop
+negateresult:
+ rtsd r15, 8
+ rsub r3, r3, r0
+result_is_zero:
+ rtsd r15, 8
+ addi r3, r0, 0
+
+.size __mulsi3, . - __mulsi3
+.end __mulsi3
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
new file mode 100644
index 0000000000..dd5f3bfbc2
--- /dev/null
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2007 LynuxWorks, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+/* Loop unrolling for __copy_tofrom_user */
+#define COPY(offset) \
+1: lwi r4 , r6, 0x0000 + offset; \
+2: lwi r19, r6, 0x0004 + offset; \
+3: lwi r20, r6, 0x0008 + offset; \
+4: lwi r21, r6, 0x000C + offset; \
+5: lwi r22, r6, 0x0010 + offset; \
+6: lwi r23, r6, 0x0014 + offset; \
+7: lwi r24, r6, 0x0018 + offset; \
+8: lwi r25, r6, 0x001C + offset; \
+9: swi r4 , r5, 0x0000 + offset; \
+10: swi r19, r5, 0x0004 + offset; \
+11: swi r20, r5, 0x0008 + offset; \
+12: swi r21, r5, 0x000C + offset; \
+13: swi r22, r5, 0x0010 + offset; \
+14: swi r23, r5, 0x0014 + offset; \
+15: swi r24, r5, 0x0018 + offset; \
+16: swi r25, r5, 0x001C + offset; \
+ .section __ex_table,"a"; \
+ .word 1b, 33f; \
+ .word 2b, 33f; \
+ .word 3b, 33f; \
+ .word 4b, 33f; \
+ .word 5b, 33f; \
+ .word 6b, 33f; \
+ .word 7b, 33f; \
+ .word 8b, 33f; \
+ .word 9b, 33f; \
+ .word 10b, 33f; \
+ .word 11b, 33f; \
+ .word 12b, 33f; \
+ .word 13b, 33f; \
+ .word 14b, 33f; \
+ .word 15b, 33f; \
+ .word 16b, 33f; \
+ .text
+
+#define COPY_80(offset) \
+ COPY(0x00 + offset);\
+ COPY(0x20 + offset);\
+ COPY(0x40 + offset);\
+ COPY(0x60 + offset);
+
+/*
+ * int __copy_tofrom_user(char *to, char *from, int len)
+ * Return:
+ * 0 on success
+ * number of not copied bytes on error
+ */
+ .text
+.globl __copy_tofrom_user;
+.type __copy_tofrom_user, @function
+.align 4;
+__copy_tofrom_user:
+ /*
+ * r5 - to
+ * r6 - from
+ * r7, r3 - count
+ * r4 - tempval
+ */
+ beqid r7, 0f /* zero size is not likely */
+ or r3, r5, r6 /* find if is any to/from unaligned */
+ or r3, r3, r7 /* find if count is unaligned */
+ andi r3, r3, 0x3 /* mask last 3 bits */
+ bneid r3, bu1 /* if r3 is not zero then byte copying */
+ or r3, r0, r0
+
+ rsubi r3, r7, PAGE_SIZE /* detect PAGE_SIZE */
+ beqid r3, page;
+ or r3, r0, r0
+
+w1: lw r4, r6, r3 /* at least one 4 byte copy */
+w2: sw r4, r5, r3
+ addik r7, r7, -4
+ bneid r7, w1
+ addik r3, r3, 4
+ addik r3, r7, 0
+ rtsd r15, 8
+ nop
+
+ .section __ex_table,"a"
+ .word w1, 0f;
+ .word w2, 0f;
+ .text
+
+.align 4 /* Alignment is important to keep icache happy */
+page: /* Create room on stack and save registers for storing values */
+ addik r1, r1, -40
+ swi r5, r1, 0
+ swi r6, r1, 4
+ swi r7, r1, 8
+ swi r19, r1, 12
+ swi r20, r1, 16
+ swi r21, r1, 20
+ swi r22, r1, 24
+ swi r23, r1, 28
+ swi r24, r1, 32
+ swi r25, r1, 36
+loop: /* r4, r19, r20, r21, r22, r23, r24, r25 are used for storing values */
+ /* Loop unrolling to get performance boost */
+ COPY_80(0x000);
+ COPY_80(0x080);
+ COPY_80(0x100);
+ COPY_80(0x180);
+ /* copy loop */
+ addik r6, r6, 0x200
+ addik r7, r7, -0x200
+ bneid r7, loop
+ addik r5, r5, 0x200
+
+ /* Restore register content */
+ lwi r5, r1, 0
+ lwi r6, r1, 4
+ lwi r7, r1, 8
+ lwi r19, r1, 12
+ lwi r20, r1, 16
+ lwi r21, r1, 20
+ lwi r22, r1, 24
+ lwi r23, r1, 28
+ lwi r24, r1, 32
+ lwi r25, r1, 36
+ addik r1, r1, 40
+ /* return back */
+ addik r3, r0, 0
+ rtsd r15, 8
+ nop
+
+/* Fault case - return temp count */
+33:
+ addik r3, r7, 0
+ /* Restore register content */
+ lwi r5, r1, 0
+ lwi r6, r1, 4
+ lwi r7, r1, 8
+ lwi r19, r1, 12
+ lwi r20, r1, 16
+ lwi r21, r1, 20
+ lwi r22, r1, 24
+ lwi r23, r1, 28
+ lwi r24, r1, 32
+ lwi r25, r1, 36
+ addik r1, r1, 40
+ /* return back */
+ rtsd r15, 8
+ nop
+
+.align 4 /* Alignment is important to keep icache happy */
+bu1: lbu r4,r6,r3
+bu2: sb r4,r5,r3
+ addik r7,r7,-1
+ bneid r7,bu1
+ addik r3,r3,1 /* delay slot */
+0:
+ addik r3,r7,0
+ rtsd r15,8
+ nop
+ .size __copy_tofrom_user, . - __copy_tofrom_user
+
+ .section __ex_table,"a"
+ .word bu1, 0b;
+ .word bu2, 0b;
+ .text
diff --git a/arch/microblaze/lib/ucmpdi2.c b/arch/microblaze/lib/ucmpdi2.c
new file mode 100644
index 0000000000..c60e068ff8
--- /dev/null
+++ b/arch/microblaze/lib/ucmpdi2.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+ const DWunion au = {.ll = a};
+ const DWunion bu = {.ll = b};
+
+ if ((unsigned int) au.s.high < (unsigned int) bu.s.high)
+ return 0;
+ else if ((unsigned int) au.s.high > (unsigned int) bu.s.high)
+ return 2;
+ if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+ return 0;
+ else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+ return 2;
+ return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/microblaze/lib/udivsi3.S b/arch/microblaze/lib/udivsi3.S
new file mode 100644
index 0000000000..acdc667235
--- /dev/null
+++ b/arch/microblaze/lib/udivsi3.S
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+* Unsigned divide operation.
+* Input : Divisor in Reg r5
+* Dividend in Reg r6
+* Output: Result in Reg r3
+*/
+
+ .text
+ .globl __udivsi3
+ .type __udivsi3, @function
+ .ent __udivsi3
+
+__udivsi3:
+
+ .frame r1, 0, r15
+
+ addik r1, r1, -12
+ swi r29, r1, 0
+ swi r30, r1, 4
+ swi r31, r1, 8
+
+ beqi r6, div_by_zero /* div_by_zero /* division error */
+ beqid r5, result_is_zero /* result is zero */
+ addik r30, r0, 0 /* clear mod */
+ addik r29, r0, 32 /* initialize the loop count */
+
+/* check if r6 and r5 are equal - if yes, return 1 */
+ rsub r18, r5, r6
+ beqid r18, return_here
+ addik r3, r0, 1
+
+/* check if (uns)r6 is greater than (uns)r5. in that case, just return 0 */
+ xor r18, r5, r6
+ bgeid r18, 16
+ add r3, r0, r0 /* we would anyways clear r3 */
+ blti r6, return_here /* r6[bit 31 = 1] hence is greater */
+ bri checkr6
+ rsub r18, r6, r5 /* microblazecmp */
+ blti r18, return_here
+
+/* if r6 [bit 31] is set, then return result as 1 */
+checkr6:
+ bgti r6, div0
+ brid return_here
+ addik r3, r0, 1
+
+/* first part try to find the first '1' in the r5 */
+div0:
+ blti r5, div2
+div1:
+ add r5, r5, r5 /* left shift logical r5 */
+ bgtid r5, div1
+ addik r29, r29, -1
+div2:
+/* left shift logical r5 get the '1' into the carry */
+ add r5, r5, r5
+ addc r30, r30, r30 /* move that bit into the mod register */
+ rsub r31, r6, r30 /* try to subtract (r30 a r6) */
+ blti r31, mod_too_small
+/* move the r31 to mod since the result was positive */
+ or r30, r0, r31
+ addik r3, r3, 1
+mod_too_small:
+ addik r29, r29, -1
+ beqi r29, loop_end
+ add r3, r3, r3 /* shift in the '1' into div */
+ bri div2 /* div2 */
+loop_end:
+ bri return_here
+div_by_zero:
+result_is_zero:
+ or r3, r0, r0 /* set result to 0 */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+ lwi r29, r1, 0
+ lwi r30, r1, 4
+ lwi r31, r1, 8
+ rtsd r15, 8
+ addik r1, r1, 12
+
+.size __udivsi3, . - __udivsi3
+.end __udivsi3
diff --git a/arch/microblaze/lib/umodsi3.S b/arch/microblaze/lib/umodsi3.S
new file mode 100644
index 0000000000..f4b814e88c
--- /dev/null
+++ b/arch/microblaze/lib/umodsi3.S
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+ * Unsigned modulo operation for 32 bit integers.
+ * Input : op1 in Reg r5
+ * op2 in Reg r6
+ * Output: op1 mod op2 in Reg r3
+ */
+
+ .text
+ .globl __umodsi3
+ .type __umodsi3, @function
+ .ent __umodsi3
+
+__umodsi3:
+ .frame r1, 0, r15
+
+ addik r1, r1, -12
+ swi r29, r1, 0
+ swi r30, r1, 4
+ swi r31, r1, 8
+
+ beqi r6, div_by_zero /* div_by_zero - division error */
+ beqid r5, result_is_zero /* result is zero */
+ addik r3, r0, 0 /* clear div */
+ addik r30, r0, 0 /* clear mod */
+ addik r29, r0, 32 /* initialize the loop count */
+
+/* check if r6 and r5 are equal /* if yes, return 0 */
+ rsub r18, r5, r6
+ beqi r18, return_here
+
+/* check if (uns)r6 is greater than (uns)r5. in that case, just return r5 */
+ xor r18, r5, r6
+ bgeid r18, 16
+ addik r3, r5, 0
+ blti r6, return_here
+ bri $lcheckr6
+ rsub r18, r5, r6 /* microblazecmp */
+ bgti r18, return_here
+
+/* if r6 [bit 31] is set, then return result as r5-r6 */
+$lcheckr6:
+ bgtid r6, div0
+ addik r3, r0, 0
+ addik r18, r0, 0x7fffffff
+ and r5, r5, r18
+ and r6, r6, r18
+ brid return_here
+ rsub r3, r6, r5
+/* first part: try to find the first '1' in the r5 */
+div0:
+ blti r5, div2
+div1:
+ add r5, r5, r5 /* left shift logical r5 */
+ bgeid r5, div1
+ addik r29, r29, -1
+div2:
+ /* left shift logical r5 get the '1' into the carry */
+ add r5, r5, r5
+ addc r3, r3, r3 /* move that bit into the mod register */
+ rsub r31, r6, r3 /* try to subtract (r3 a r6) */
+ blti r31, mod_too_small
+ /* move the r31 to mod since the result was positive */
+ or r3, r0, r31
+ addik r30, r30, 1
+mod_too_small:
+ addik r29, r29, -1
+ beqi r29, loop_end
+ add r30, r30, r30 /* shift in the '1' into div */
+ bri div2 /* div2 */
+loop_end:
+ bri return_here
+div_by_zero:
+result_is_zero:
+ or r3, r0, r0 /* set result to 0 */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+ lwi r29, r1, 0
+ lwi r30, r1, 4
+ lwi r31, r1, 8
+ rtsd r15, 8
+ addik r1, r1, 12
+
+.size __umodsi3, . - __umodsi3
+.end __umodsi3
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
new file mode 100644
index 0000000000..75edfc110d
--- /dev/null
+++ b/arch/microblaze/mm/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile
+#
+
+obj-y := consistent.o init.o pgtable.o mmu_context.o fault.o
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
new file mode 100644
index 0000000000..b7ad4a9863
--- /dev/null
+++ b/arch/microblaze/mm/consistent.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Microblaze support for cache consistent memory.
+ * Copyright (C) 2010 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2010 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/dma-map-ops.h>
+#include <asm/cpuinfo.h>
+#include <asm/cacheflush.h>
+
+void arch_dma_prep_coherent(struct page *page, size_t size)
+{
+ phys_addr_t paddr = page_to_phys(page);
+
+ flush_dcache_range(paddr, paddr + size);
+}
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
new file mode 100644
index 0000000000..d3c3c33b73
--- /dev/null
+++ b/arch/microblaze/mm/fault.c
@@ -0,0 +1,299 @@
+/*
+ * arch/microblaze/mm/fault.c
+ *
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from "arch/ppc/mm/fault.c"
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Derived from "arch/i386/mm/fault.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Modified by Cort Dougan and Paul Mackerras.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/extable.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/perf_event.h>
+
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <linux/mmu_context.h>
+#include <linux/uaccess.h>
+#include <asm/exceptions.h>
+
+static unsigned long pte_misses; /* updated by do_page_fault() */
+static unsigned long pte_errors; /* updated by do_page_fault() */
+
+/*
+ * Check whether the instruction at regs->pc is a store using
+ * an update addressing form which will update r1.
+ */
+static int store_updates_sp(struct pt_regs *regs)
+{
+ unsigned int inst;
+
+ if (get_user(inst, (unsigned int __user *)regs->pc))
+ return 0;
+ /* check for 1 in the rD field */
+ if (((inst >> 21) & 0x1f) != 1)
+ return 0;
+ /* check for store opcodes */
+ if ((inst & 0xd0000000) == 0xd0000000)
+ return 1;
+ return 0;
+}
+
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from do_page_fault above and from some of the procedures
+ * in traps.c.
+ */
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+ const struct exception_table_entry *fixup;
+/* MS: no context */
+ /* Are we prepared to handle this fault? */
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+
+ /* kernel has accessed a bad area */
+ die("kernel access of bad area", regs, sig);
+}
+
+/*
+ * The error_code parameter is ESR for a data fault,
+ * 0 for an instruction fault.
+ */
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ int code = SEGV_MAPERR;
+ int is_write = error_code & ESR_S;
+ vm_fault_t fault;
+ unsigned int flags = FAULT_FLAG_DEFAULT;
+
+ regs->ear = address;
+ regs->esr = error_code;
+
+ /* On a kernel SLB miss we can only check for a valid exception entry */
+ if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) {
+ pr_warn("kernel task_size exceed");
+ _exception(SIGSEGV, regs, code, address);
+ }
+
+ /* for instr TLB miss and instr storage exception ESR_S is undefined */
+ if ((error_code & 0x13) == 0x13 || (error_code & 0x11) == 0x11)
+ is_write = 0;
+
+ if (unlikely(faulthandler_disabled() || !mm)) {
+ if (kernel_mode(regs))
+ goto bad_area_nosemaphore;
+
+ /* faulthandler_disabled() in user mode is really bad,
+ as is current->mm == NULL. */
+ pr_emerg("Page fault in user mode with faulthandler_disabled(), mm = %p\n",
+ mm);
+ pr_emerg("r15 = %lx MSR = %lx\n",
+ regs->r15, regs->msr);
+ die("Weird page fault", regs, SIGSEGV);
+ }
+
+ if (user_mode(regs))
+ flags |= FAULT_FLAG_USER;
+
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
+ /* When running in the kernel we expect faults to occur only to
+ * addresses in user space. All other faults represent errors in the
+ * kernel and should generate an OOPS. Unfortunately, in the case of an
+ * erroneous fault occurring in a code path which already holds mmap_lock
+ * we will deadlock attempting to validate the fault against the
+ * address space. Luckily the kernel only validly references user
+ * space from well defined areas of code, which are listed in the
+ * exceptions table.
+ *
+ * As the vast majority of faults will be valid we will only perform
+ * the source reference check when there is a possibility of a deadlock.
+ * Attempt to lock the address space, if we cannot we then validate the
+ * source. If this is invalid we can skip the address space check,
+ * thus avoiding the deadlock.
+ */
+ if (unlikely(!mmap_read_trylock(mm))) {
+ if (kernel_mode(regs) && !search_exception_tables(regs->pc))
+ goto bad_area_nosemaphore;
+
+retry:
+ mmap_read_lock(mm);
+ }
+
+ vma = find_vma(mm, address);
+ if (unlikely(!vma))
+ goto bad_area;
+
+ if (vma->vm_start <= address)
+ goto good_area;
+
+ if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
+ goto bad_area;
+
+ if (unlikely(!is_write))
+ goto bad_area;
+
+ /*
+ * N.B. The ABI allows programs to access up to
+ * a few hundred bytes below the stack pointer (TBD).
+ * The kernel signal delivery code writes up to about 1.5kB
+ * below the stack pointer (r1) before decrementing it.
+ * The exec code can write slightly over 640kB to the stack
+ * before setting the user r1. Thus we allow the stack to
+ * expand to 1MB without further checks.
+ */
+ if (unlikely(address + 0x100000 < vma->vm_end)) {
+
+ /* get user regs even if this fault is in kernel mode */
+ struct pt_regs *uregs = current->thread.regs;
+ if (uregs == NULL)
+ goto bad_area;
+
+ /*
+ * A user-mode access to an address a long way below
+ * the stack pointer is only valid if the instruction
+ * is one which would update the stack pointer to the
+ * address accessed if the instruction completed,
+ * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+ * (or the byte, halfword, float or double forms).
+ *
+ * If we don't check this then any write to the area
+ * between the last mapped region and the stack will
+ * expand the stack rather than segfaulting.
+ */
+ if (address + 2048 < uregs->r1
+ && (kernel_mode(regs) || !store_updates_sp(regs)))
+ goto bad_area;
+ }
+ vma = expand_stack(mm, address);
+ if (!vma)
+ goto bad_area_nosemaphore;
+
+good_area:
+ code = SEGV_ACCERR;
+
+ /* a write */
+ if (unlikely(is_write)) {
+ if (unlikely(!(vma->vm_flags & VM_WRITE)))
+ goto bad_area;
+ flags |= FAULT_FLAG_WRITE;
+ /* a read */
+ } else {
+ /* protection fault */
+ if (unlikely(error_code & 0x08000000))
+ goto bad_area;
+ if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC))))
+ goto bad_area;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(vma, address, flags, regs);
+
+ if (fault_signal_pending(fault, regs)) {
+ if (!user_mode(regs))
+ bad_page_fault(regs, address, SIGBUS);
+ return;
+ }
+
+ /* The fault is fully completed (including releasing mmap lock) */
+ if (fault & VM_FAULT_COMPLETED)
+ return;
+
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGSEGV)
+ goto bad_area;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+
+ if (fault & VM_FAULT_RETRY) {
+ flags |= FAULT_FLAG_TRIED;
+
+ /*
+ * No need to mmap_read_unlock(mm) as we would
+ * have already released it in __lock_page_or_retry
+ * in mm/filemap.c.
+ */
+
+ goto retry;
+ }
+
+ mmap_read_unlock(mm);
+
+ /*
+ * keep track of tlb+htab misses that are good addrs but
+ * just need pte's created via handle_mm_fault()
+ * -- Cort
+ */
+ pte_misses++;
+ return;
+
+bad_area:
+ mmap_read_unlock(mm);
+
+bad_area_nosemaphore:
+ pte_errors++;
+
+ /* User mode accesses cause a SIGSEGV */
+ if (user_mode(regs)) {
+ _exception(SIGSEGV, regs, code, address);
+ return;
+ }
+
+ bad_page_fault(regs, address, SIGSEGV);
+ return;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ mmap_read_unlock(mm);
+ if (!user_mode(regs))
+ bad_page_fault(regs, address, SIGKILL);
+ else
+ pagefault_out_of_memory();
+ return;
+
+do_sigbus:
+ mmap_read_unlock(mm);
+ if (user_mode(regs)) {
+ force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
+ return;
+ }
+ bad_page_fault(regs, address, SIGBUS);
+}
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
new file mode 100644
index 0000000000..3827dc76ed
--- /dev/null
+++ b/arch/microblaze/mm/init.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/dma-map-ops.h>
+#include <linux/memblock.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h> /* mem_init */
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+#include <linux/pagemap.h>
+#include <linux/pfn.h>
+#include <linux/slab.h>
+#include <linux/swap.h>
+#include <linux/export.h>
+
+#include <asm/page.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/tlb.h>
+#include <asm/fixmap.h>
+
+/* Use for MMU and noMMU because of PCI generic code */
+int mem_init_done;
+
+char *klimit = _end;
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.
+ */
+unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+unsigned long memory_size;
+EXPORT_SYMBOL(memory_size);
+unsigned long lowmem_size;
+
+EXPORT_SYMBOL(min_low_pfn);
+EXPORT_SYMBOL(max_low_pfn);
+
+#ifdef CONFIG_HIGHMEM
+static void __init highmem_init(void)
+{
+ pr_debug("%x\n", (u32)PKMAP_BASE);
+ map_page(PKMAP_BASE, 0, 0); /* XXX gross */
+ pkmap_page_table = virt_to_kpte(PKMAP_BASE);
+}
+
+static void __meminit highmem_setup(void)
+{
+ unsigned long pfn;
+
+ for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) {
+ struct page *page = pfn_to_page(pfn);
+
+ /* FIXME not sure about */
+ if (!memblock_is_reserved(pfn << PAGE_SHIFT))
+ free_highmem_page(page);
+ }
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+static void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES];
+ int idx;
+
+ /* Setup fixmaps */
+ for (idx = 0; idx < __end_of_fixed_addresses; idx++)
+ clear_fixmap(idx);
+
+ /* Clean every zones */
+ memset(zones_size, 0, sizeof(zones_size));
+
+#ifdef CONFIG_HIGHMEM
+ highmem_init();
+
+ zones_size[ZONE_DMA] = max_low_pfn;
+ zones_size[ZONE_HIGHMEM] = max_pfn;
+#else
+ zones_size[ZONE_DMA] = max_pfn;
+#endif
+
+ /* We don't have holes in memory map */
+ free_area_init(zones_size);
+}
+
+void __init setup_memory(void)
+{
+ /*
+ * Kernel:
+ * start: base phys address of kernel - page align
+ * end: base phys address of kernel - page align
+ *
+ * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
+ * max_low_pfn
+ * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
+ */
+
+ /* memory start is from the kernel end (aligned) to higher addr */
+ min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
+ /* RAM is assumed contiguous */
+ max_mapnr = memory_size >> PAGE_SHIFT;
+ max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT;
+ max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT;
+
+ pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr);
+ pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
+ pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
+ pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
+
+ paging_init();
+}
+
+void __init mem_init(void)
+{
+ high_memory = (void *)__va(memory_start + lowmem_size - 1);
+
+ /* this will put all memory onto the freelists */
+ memblock_free_all();
+#ifdef CONFIG_HIGHMEM
+ highmem_setup();
+#endif
+
+ mem_init_done = 1;
+}
+
+int page_is_ram(unsigned long pfn)
+{
+ return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void mm_cmdline_setup(void)
+{
+ unsigned long maxmem = 0;
+ char *p = cmd_line;
+
+ /* Look for mem= option on command line */
+ p = strstr(cmd_line, "mem=");
+ if (p) {
+ p += 4;
+ maxmem = memparse(p, &p);
+ if (maxmem && memory_size > maxmem) {
+ memory_size = maxmem;
+ memblock.memory.regions[0].size = memory_size;
+ }
+ }
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+ /*
+ * The Zone Protection Register (ZPR) defines how protection will
+ * be applied to every page which is a member of a given zone. At
+ * present, we utilize only two of the zones.
+ * The zone index bits (of ZSEL) in the PTE are used for software
+ * indicators, except the LSB. For user access, zone 1 is used,
+ * for kernel access, zone 0 is used. We set all but zone 1
+ * to zero, allowing only kernel access as indicated in the PTE.
+ * For zone 1, we set a 01 binary (a value of 10 will not work)
+ * to allow user access as indicated in the PTE. This also allows
+ * kernel access as indicated in the PTE.
+ */
+ __asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+ "mts rzpr, r11;"
+ : : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+ unsigned int kstart, ksize;
+
+ if (!memblock.reserved.cnt) {
+ pr_emerg("Error memory count\n");
+ machine_restart(NULL);
+ }
+
+ if ((u32) memblock.memory.regions[0].size < 0x400000) {
+ pr_emerg("Memory must be greater than 4MB\n");
+ machine_restart(NULL);
+ }
+
+ if ((u32) memblock.memory.regions[0].size < kernel_tlb) {
+ pr_emerg("Kernel size is greater than memory node\n");
+ machine_restart(NULL);
+ }
+
+ /* Find main memory where the kernel is */
+ memory_start = (u32) memblock.memory.regions[0].base;
+ lowmem_size = memory_size = (u32) memblock.memory.regions[0].size;
+
+ if (lowmem_size > CONFIG_LOWMEM_SIZE) {
+ lowmem_size = CONFIG_LOWMEM_SIZE;
+#ifndef CONFIG_HIGHMEM
+ memory_size = lowmem_size;
+#endif
+ }
+
+ mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+ /*
+ * Map out the kernel text/data/bss from the available physical
+ * memory.
+ */
+ kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+ /* kernel size */
+ ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+ memblock_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /* Remove the init RAM disk from the available memory. */
+ if (initrd_start) {
+ unsigned long size;
+ size = initrd_end - initrd_start;
+ memblock_reserve(__virt_to_phys(initrd_start), size);
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Initialize the MMU hardware */
+ mmu_init_hw();
+
+ /* Map in all of RAM starting at CONFIG_KERNEL_START */
+ mapin_ram();
+
+ /* Extend vmalloc and ioremap area as big as possible */
+#ifdef CONFIG_HIGHMEM
+ ioremap_base = ioremap_bot = PKMAP_BASE;
+#else
+ ioremap_base = ioremap_bot = FIXADDR_START;
+#endif
+
+ /* Initialize the context management stuff */
+ mmu_context_init();
+
+ /* Shortly after that, the entire linear mapping will be available */
+ /* This will also cause that unflatten device tree will be allocated
+ * inside 768MB limit */
+ memblock_set_current_limit(memory_start + lowmem_size - 1);
+
+ parse_early_param();
+
+ early_init_fdt_scan_reserved_mem();
+
+ /* CMA initialization */
+ dma_contiguous_reserve(memory_start + lowmem_size - 1);
+
+ memblock_dump_all();
+}
+
+static const pgprot_t protection_map[16] = {
+ [VM_NONE] = PAGE_NONE,
+ [VM_READ] = PAGE_READONLY_X,
+ [VM_WRITE] = PAGE_COPY,
+ [VM_WRITE | VM_READ] = PAGE_COPY_X,
+ [VM_EXEC] = PAGE_READONLY,
+ [VM_EXEC | VM_READ] = PAGE_READONLY_X,
+ [VM_EXEC | VM_WRITE] = PAGE_COPY,
+ [VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY_X,
+ [VM_SHARED] = PAGE_NONE,
+ [VM_SHARED | VM_READ] = PAGE_READONLY_X,
+ [VM_SHARED | VM_WRITE] = PAGE_SHARED,
+ [VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED_X,
+ [VM_SHARED | VM_EXEC] = PAGE_READONLY,
+ [VM_SHARED | VM_EXEC | VM_READ] = PAGE_READONLY_X,
+ [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_SHARED,
+ [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_SHARED_X
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/microblaze/mm/mmu_context.c b/arch/microblaze/mm/mmu_context.c
new file mode 100644
index 0000000000..cbc2348167
--- /dev/null
+++ b/arch/microblaze/mm/mmu_context.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for handling the MMU.
+ *
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from arch/ppc/mm/4xx_mmu.c:
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+ /*
+ * The use of context zero is reserved for the kernel.
+ * This code assumes FIRST_CONTEXT < 32.
+ */
+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
+ next_mmu_context = FIRST_CONTEXT;
+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :). This would be the
+ * place to implement an LRU scheme if anyone were motivated to do it.
+ */
+void steal_context(void)
+{
+ struct mm_struct *mm;
+
+ /* free up context `next_mmu_context' */
+ /* if we shouldn't free context 0, don't... */
+ if (next_mmu_context < FIRST_CONTEXT)
+ next_mmu_context = FIRST_CONTEXT;
+ mm = context_mm[next_mmu_context];
+ flush_tlb_mm(mm);
+ destroy_context(mm);
+}
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
new file mode 100644
index 0000000000..9f73265aad
--- /dev/null
+++ b/arch/microblaze/mm/pgtable.c
@@ -0,0 +1,264 @@
+/*
+ * This file contains the routines setting up the linux page tables.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ *
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * Derived from arch/ppc/mm/pgtable.c:
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/mm_types.h>
+#include <linux/pgtable.h>
+#include <linux/memblock.h>
+#include <linux/kallsyms.h>
+
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/sections.h>
+#include <asm/fixmap.h>
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+EXPORT_SYMBOL(ioremap_bot);
+
+static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
+ unsigned long flags)
+{
+ unsigned long v, i;
+ phys_addr_t p;
+ int err;
+
+ /*
+ * Choose an address to map it to.
+ * Once the vmalloc system is running, we use it.
+ * Before then, we use space going down from ioremap_base
+ * (ioremap_bot records where we're up to).
+ */
+ p = addr & PAGE_MASK;
+ size = PAGE_ALIGN(addr + size) - p;
+
+ /*
+ * Don't allow anybody to remap normal RAM that we're using.
+ * mem_init() sets high_memory so only do the check after that.
+ *
+ * However, allow remap of rootfs: TBD
+ */
+
+ if (mem_init_done &&
+ p >= memory_start && p < virt_to_phys(high_memory) &&
+ !(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
+ p < __virt_to_phys((phys_addr_t)__bss_stop))) {
+ pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %ps\n",
+ (unsigned long)p, __builtin_return_address(0));
+ return NULL;
+ }
+
+ if (size == 0)
+ return NULL;
+
+ /*
+ * Is it already mapped? If the whole area is mapped then we're
+ * done, otherwise remap it since we want to keep the virt addrs for
+ * each request contiguous.
+ *
+ * We make the assumption here that if the bottom and top
+ * of the range we want are mapped then it's mapped to the
+ * same virt address (and this is contiguous).
+ * -- Cort
+ */
+
+ if (mem_init_done) {
+ struct vm_struct *area;
+ area = get_vm_area(size, VM_IOREMAP);
+ if (area == NULL)
+ return NULL;
+ v = (unsigned long) area->addr;
+ } else {
+ v = (ioremap_bot -= size);
+ }
+
+ if ((flags & _PAGE_PRESENT) == 0)
+ flags |= _PAGE_KERNEL;
+ if (flags & _PAGE_NO_CACHE)
+ flags |= _PAGE_GUARDED;
+
+ err = 0;
+ for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+ err = map_page(v + i, p + i, flags);
+ if (err) {
+ if (mem_init_done)
+ vfree((void *)v);
+ return NULL;
+ }
+
+ return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void __iomem *ioremap(phys_addr_t addr, unsigned long size)
+{
+ return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+EXPORT_SYMBOL(ioremap);
+
+void iounmap(volatile void __iomem *addr)
+{
+ if ((__force void *)addr > high_memory &&
+ (unsigned long) addr < ioremap_bot)
+ vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+EXPORT_SYMBOL(iounmap);
+
+
+int map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+ p4d_t *p4d;
+ pud_t *pud;
+ pmd_t *pd;
+ pte_t *pg;
+ int err = -ENOMEM;
+
+ /* Use upper 10 bits of VA to index the first level map */
+ p4d = p4d_offset(pgd_offset_k(va), va);
+ pud = pud_offset(p4d, va);
+ pd = pmd_offset(pud, va);
+ /* Use middle 10 bits of VA to index the second-level map */
+ pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */
+ /* pg = pte_alloc_kernel(&init_mm, pd, va); */
+
+ if (pg != NULL) {
+ err = 0;
+ set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
+ __pgprot(flags)));
+ if (unlikely(mem_init_done))
+ _tlbie(va);
+ }
+ return err;
+}
+
+/*
+ * Map in all of physical memory starting at CONFIG_KERNEL_START.
+ */
+void __init mapin_ram(void)
+{
+ unsigned long v, p, s, f;
+
+ v = CONFIG_KERNEL_START;
+ p = memory_start;
+ for (s = 0; s < lowmem_size; s += PAGE_SIZE) {
+ f = _PAGE_PRESENT | _PAGE_ACCESSED |
+ _PAGE_SHARED | _PAGE_HWEXEC;
+ if (!is_kernel_text(v))
+ f |= _PAGE_WRENABLE;
+ else
+ /* On the MicroBlaze, no user access
+ forces R/W kernel access */
+ f |= _PAGE_USER;
+ map_page(v, p, f);
+ v += PAGE_SIZE;
+ p += PAGE_SIZE;
+ }
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise. The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+ pgd_t *pgd;
+ p4d_t *p4d;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ int retval = 0;
+
+ pgd = pgd_offset(mm, addr & PAGE_MASK);
+ if (pgd) {
+ p4d = p4d_offset(pgd, addr & PAGE_MASK);
+ pud = pud_offset(p4d, addr & PAGE_MASK);
+ pmd = pmd_offset(pud, addr & PAGE_MASK);
+ if (pmd_present(*pmd)) {
+ pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
+ if (pte) {
+ retval = 1;
+ *ptep = pte;
+ }
+ }
+ }
+ return retval;
+}
+
+/* Find physical address for this virtual address. Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+ unsigned long pa;
+
+ pte_t *pte;
+ struct mm_struct *mm;
+
+ /* Allow mapping of user addresses (within the thread)
+ * for DMA if necessary.
+ */
+ if (addr < TASK_SIZE)
+ mm = current->mm;
+ else
+ mm = &init_mm;
+
+ pa = 0;
+ if (get_pteptr(mm, addr, &pte))
+ pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+
+ return pa;
+}
+
+__ref pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
+{
+ if (mem_init_done)
+ return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+ else
+ return memblock_alloc_try_nid(PAGE_SIZE, PAGE_SIZE,
+ MEMBLOCK_LOW_LIMIT,
+ memory_start + kernel_tlb,
+ NUMA_NO_NODE);
+}
+
+void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
+{
+ unsigned long address = __fix_to_virt(idx);
+
+ if (idx >= __end_of_fixed_addresses)
+ BUG();
+
+ map_page(address, phys, pgprot_val(flags));
+}
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
new file mode 100644
index 0000000000..f8267d20e0
--- /dev/null
+++ b/arch/microblaze/pci/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile
+#
+
+obj-$(CONFIG_PCI) += iomap.o
diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c
new file mode 100644
index 0000000000..b2ee8ace9b
--- /dev/null
+++ b/arch/microblaze/pci/iomap.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ppc64 "iomap" interface implementation.
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <asm/pci-bridge.h>
+
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+unsigned long isa_io_base;
+EXPORT_SYMBOL(isa_io_base);
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+ return resource_size(&hose->io_resource);
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ int ret = 0;
+ struct pci_controller *hose;
+ resource_size_t size;
+
+ spin_lock(&hose_spinlock);
+ list_for_each_entry(hose, &hose_list, list_node) {
+ size = pcibios_io_size(hose);
+ if (address >= hose->io_base_virt &&
+ address < (hose->io_base_virt + size)) {
+ ret = 1;
+ break;
+ }
+ }
+ spin_unlock(&hose_spinlock);
+ return ret;
+}
+
+/* Display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+ return pci_domain_nr(bus);
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ if (isa_vaddr_is_ioport(addr))
+ return;
+ if (pcibios_vaddr_is_ioport(addr))
+ return;
+ iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);