diff options
Diffstat (limited to 'arch/mips/Kconfig.debug')
| -rw-r--r-- | arch/mips/Kconfig.debug | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug new file mode 100644 index 0000000000..f4ae7900fc --- /dev/null +++ b/arch/mips/Kconfig.debug @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0 + +config EARLY_PRINTK + bool "Early printk" if EXPERT + depends on SYS_HAS_EARLY_PRINTK + default y + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation, + it is not recommended because it looks ugly on some machines and + doesn't cooperate with an X server. You should normally say N here, + unless you want to debug such a crash. + +config EARLY_PRINTK_8250 + bool + depends on EARLY_PRINTK && USE_GENERIC_EARLY_PRINTK_8250 + default y + help + "8250/16550 and compatible serial early printk driver" + If you say Y here, it will be possible to use a 8250/16550 serial + port as the boot console. + +config USE_GENERIC_EARLY_PRINTK_8250 + bool + +config CMDLINE_BOOL + bool "Built-in kernel command line" + help + For most systems, it is firmware or second stage bootloader that + by default specifies the kernel command line options. However, + it might be necessary or advantageous to either override the + default kernel command line or add a few extra options to it. + For such cases, this option allows you to hardcode your own + command line options directly into the kernel. For that, you + should choose 'Y' here, and fill in the extra boot arguments + in CONFIG_CMDLINE. + + The built-in options will be concatenated to the default command + line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default + command line will be ignored and replaced by the built-in string. + + Most MIPS systems will normally expect 'N' here and rely upon + the command line from the firmware or the second-stage bootloader. + +config CMDLINE + string "Default kernel command string" + depends on CMDLINE_BOOL + help + On some platforms, there is currently no way for the boot loader to + pass arguments to the kernel. For these platforms, and for the cases + when you want to add some extra options to the command line or ignore + the default command line, you can supply some command-line options at + build time by entering them here. In other cases you can specify + kernel args so that you don't have to set them up in board prom + initialization routines. + + For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE + options. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides firmware arguments" + depends on CMDLINE_BOOL + help + By setting this option to 'Y' you will have your kernel ignore + command line arguments from firmware or second stage bootloader. + Instead, the built-in command line will be used exclusively. + + Normally, you will choose 'N' here. + +config SB1XXX_CORELIS + bool "Corelis Debugger" + depends on SIBYTE_SB1xxx_SOC + select DEBUG_KERNEL if !COMPILE_TEST + select DEBUG_INFO if !COMPILE_TEST + help + Select compile flags that produce code that can be processed by the + Corelis mksym utility and UDB Emulator. + +config DEBUG_ZBOOT + bool "Enable compressed kernel support debugging" + depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT + default n + help + If you want to add compressed kernel support to a new board, and the + board supports uart16550 compatible serial port, please select + SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to + debug it. + + If your board doesn't support uart16550 compatible serial port, you + can try to select SYS_SUPPORTS_ZBOOT and use the other methods to + debug it. for example, add a new serial port support just as + arch/mips/boot/compressed/uart-16550.c does. + + After the compressed kernel support works, please disable this option + to reduce the kernel image size and speed up the booting procedure a + little. + +config ZBOOT_INGENIC_UART + int "UART to use for compressed kernel debugging" + depends on DEBUG_ZBOOT && MACH_INGENIC_SOC + default 0 + range 0 4 + help + Specify the UART that should be used for compressed kernel debugging. + +config SPINLOCK_TEST + bool "Enable spinlock timing tests in debugfs" + depends on DEBUG_FS + default n + help + Add several files to the debugfs to test spinlock speed. + +config SCACHE_DEBUGFS + bool "L2 cache debugfs entries" + depends on DEBUG_FS + help + Enable this to allow parts of the L2 cache configuration, such as + whether or not prefetching is enabled, to be exposed to userland + via debugfs. + + If unsure, say N. + +menuconfig MIPS_CPS_NS16550_BOOL + bool "CPS SMP NS16550 UART output" + depends on MIPS_CPS + help + Output debug information via an ns16550 compatible UART if exceptions + occur early in the boot process of a secondary core. + +if MIPS_CPS_NS16550_BOOL + +config MIPS_CPS_NS16550 + def_bool MIPS_CPS_NS16550_BASE != 0 + +config MIPS_CPS_NS16550_BASE + hex "UART Base Address" + default 0x1b0003f8 if MIPS_MALTA + default 0 + help + The base address of the ns16550 compatible UART on which to output + debug information from the early stages of core startup. + + This is only used if non-zero. + +config MIPS_CPS_NS16550_SHIFT + int "UART Register Shift" + default 0 + help + The number of bits to shift ns16550 register indices by in order to + form their addresses. That is, log base 2 of the span between + adjacent ns16550 registers in the system. + +config MIPS_CPS_NS16550_WIDTH + int "UART Register Width" + default 1 + help + ns16550 registers width. UART registers IO access methods will be + selected in accordance with this parameter. By setting it to 1, 2 or + 4 UART registers will be accessed by means of lb/sb, lh/sh or lw/sw + instructions respectively. Any value not from that set activates + lb/sb instructions. + +endif # MIPS_CPS_NS16550_BOOL |