diff options
Diffstat (limited to 'arch/mips/boot/dts/mscc/ocelot_pcb120.dts')
-rw-r--r-- | arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts new file mode 100644 index 0000000000..d348742c23 --- /dev/null +++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2017 Microsemi Corporation */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy-ocelot-serdes.h> +#include "ocelot.dtsi" + +/ { + compatible = "mscc,ocelot-pcb120", "mscc,ocelot"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0e000000>; + }; +}; + +&gpio { + phy_int_pins: phy-int-pins { + pins = "GPIO_4"; + function = "gpio"; + }; + + phy_load_save_pins: phy-load-save-pins { + pins = "GPIO_10"; + function = "ptp2"; + }; +}; + +&mdio0 { + status = "okay"; +}; + +&mdio1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>; + + phy7: ethernet-phy@0 { + reg = <0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + }; + phy6: ethernet-phy@1 { + reg = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + }; + phy5: ethernet-phy@2 { + reg = <2>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + }; + phy4: ethernet-phy@3 { + reg = <3>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&port0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "internal"; +}; + +&port1 { + status = "okay"; + phy-handle = <&phy1>; + phy-mode = "internal"; +}; + +&port2 { + status = "okay"; + phy-handle = <&phy2>; + phy-mode = "internal"; +}; + +&port3 { + status = "okay"; + phy-handle = <&phy3>; + phy-mode = "internal"; +}; + +&port4 { + status = "okay"; + phy-handle = <&phy7>; + phy-mode = "sgmii"; + phys = <&serdes 4 SERDES1G(2)>; +}; + +&port5 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "sgmii"; + phys = <&serdes 5 SERDES1G(5)>; +}; + +&port6 { + status = "okay"; + phy-handle = <&phy6>; + phy-mode = "sgmii"; + phys = <&serdes 6 SERDES1G(3)>; +}; + +&port9 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "sgmii"; + phys = <&serdes 9 SERDES1G(4)>; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; |