diff options
Diffstat (limited to 'arch/mips/include/asm/io.h')
| -rw-r--r-- | arch/mips/include/asm/io.h | 560 |
1 files changed, 560 insertions, 0 deletions
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h new file mode 100644 index 0000000000..062dd4e6b9 --- /dev/null +++ b/arch/mips/include/asm/io.h @@ -0,0 +1,560 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf GmbH + * Copyright (C) 1994 - 2000, 06 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki <macro@mips.com> + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include <linux/compiler.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/irqflags.h> + +#include <asm/addrspace.h> +#include <asm/barrier.h> +#include <asm/bug.h> +#include <asm/byteorder.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/page.h> +#include <asm/pgtable-bits.h> +#include <asm/processor.h> +#include <asm/string.h> +#include <mangle-port.h> + +/* + * Raw operations are never swapped in software. OTOH values that raw + * operations are working on may or may not have been swapped by the bus + * hardware. An example use would be for flash memory that's used for + * execute in place. + */ +# define __raw_ioswabb(a, x) (x) +# define __raw_ioswabw(a, x) (x) +# define __raw_ioswabl(a, x) (x) +# define __raw_ioswabq(a, x) (x) +# define ____raw_ioswabq(a, x) (x) + +# define __relaxed_ioswabb ioswabb +# define __relaxed_ioswabw ioswabw +# define __relaxed_ioswabl ioswabl +# define __relaxed_ioswabq ioswabq + +/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ + +/* + * On MIPS I/O ports are memory mapped, so we access them using normal + * load/store instructions. mips_io_port_base is the virtual address to + * which all ports are being mapped. For sake of efficiency some code + * assumes that this is an address that can be loaded with a single lui + * instruction, so the lower 16 bits must be zero. Should be true on + * any sane architecture; generic code does not use this assumption. + */ +extern unsigned long mips_io_port_base; + +static inline void set_io_port_base(unsigned long base) +{ + mips_io_port_base = base; +} + +/* + * Provide the necessary definitions for generic iomap. We make use of + * mips_io_port_base for iomap(), but we don't reserve any low addresses for + * use with I/O ports. + */ + +#define HAVE_ARCH_PIO_SIZE +#define PIO_OFFSET mips_io_port_base +#define PIO_MASK IO_SPACE_LIMIT +#define PIO_RESERVED 0x0UL + +/* + * Enforce in-order execution of data I/O. In the MIPS architecture + * these are equivalent to corresponding platform-specific memory + * barriers defined in <asm/barrier.h>. API pinched from PowerPC, + * with sync additionally defined. + */ +#define iobarrier_rw() mb() +#define iobarrier_r() rmb() +#define iobarrier_w() wmb() +#define iobarrier_sync() iob() + +/* + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long __virt_to_phys_nodebug(volatile const void *address) +{ + return __pa(address); +} + +#ifdef CONFIG_DEBUG_VIRTUAL +extern phys_addr_t __virt_to_phys(volatile const void *x); +#else +#define __virt_to_phys(x) __virt_to_phys_nodebug(x) +#endif + +#define virt_to_phys virt_to_phys +static inline phys_addr_t virt_to_phys(const volatile void *x) +{ + return __virt_to_phys(x); +} + +/* + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +static inline unsigned long isa_virt_to_bus(volatile void *address) +{ + return virt_to_phys(address); +} + +static inline void *isa_bus_to_virt(unsigned long address) +{ + return phys_to_virt(address); +} + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) + +void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, + unsigned long prot_val); +void iounmap(const volatile void __iomem *addr); + +/* + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ +#define ioremap(offset, size) \ + ioremap_prot((offset), (size), _CACHE_UNCACHED) +#define ioremap_uc ioremap + +/* + * ioremap_cache - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_cache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked cachable by + * the CPU. Also enables full write-combining. Useful for some + * memory-like regions on I/O busses. + */ +#define ioremap_cache(offset, size) \ + ioremap_prot((offset), (size), _page_cachable_default) + +/* + * ioremap_wc - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_wc performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked uncachable + * but accelerated by means of write-combining feature. It is specifically + * useful for PCIe prefetchable windows, which may vastly improve a + * communications performance. If it was determined on boot stage, what + * CPU CCA doesn't support UCA, the method shall fall-back to the + * _CACHE_UNCACHED option (see cpu_probe() method). + */ +#define ioremap_wc(offset, size) \ + ioremap_prot((offset), (size), boot_cpu_data.writecombine) + +#include <asm-generic/iomap.h> + +#if defined(CONFIG_CPU_CAVIUM_OCTEON) +#define war_io_reorder_wmb() wmb() +#else +#define war_io_reorder_wmb() barrier() +#endif + +#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \ + \ +static inline void pfx##write##bwlq(type val, \ + volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + if (barrier) \ + iobarrier_rw(); \ + else \ + war_io_reorder_wmb(); \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + __val = pfx##ioswab##bwlq(__mem, val); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + *__mem = __val; \ + else if (cpu_has_64bits) { \ + unsigned long __flags; \ + type __tmp; \ + \ + if (irq) \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set push" "\t\t# __writeq""\n\t" \ + ".set arch=r4000" "\n\t" \ + "dsll32 %L0, %L0, 0" "\n\t" \ + "dsrl32 %L0, %L0, 0" "\n\t" \ + "dsll32 %M0, %M0, 0" "\n\t" \ + "or %L0, %L0, %M0" "\n\t" \ + "sd %L0, %2" "\n\t" \ + ".set pop" "\n" \ + : "=r" (__tmp) \ + : "0" (__val), "m" (*__mem)); \ + if (irq) \ + local_irq_restore(__flags); \ + } else \ + BUG(); \ +} \ + \ +static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + if (barrier) \ + iobarrier_rw(); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + __val = *__mem; \ + else if (cpu_has_64bits) { \ + unsigned long __flags; \ + \ + if (irq) \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set push" "\t\t# __readq" "\n\t" \ + ".set arch=r4000" "\n\t" \ + "ld %L0, %1" "\n\t" \ + "dsra32 %M0, %L0, 0" "\n\t" \ + "sll %L0, %L0, 0" "\n\t" \ + ".set pop" "\n" \ + : "=r" (__val) \ + : "m" (*__mem)); \ + if (irq) \ + local_irq_restore(__flags); \ + } else { \ + __val = 0; \ + BUG(); \ + } \ + \ + /* prevent prefetching of coherent DMA data prematurely */ \ + if (!relax) \ + rmb(); \ + return pfx##ioswab##bwlq(__mem, __val); \ +} + +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax, p) \ + \ +static inline void pfx##out##bwlq##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + if (barrier) \ + iobarrier_rw(); \ + else \ + war_io_reorder_wmb(); \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + __val = pfx##ioswab##bwlq(__addr, val); \ + \ + /* Really, we want this to be atomic */ \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ +} \ + \ +static inline type pfx##in##bwlq##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + if (barrier) \ + iobarrier_rw(); \ + \ + __val = *__addr; \ + \ + /* prevent prefetching of coherent DMA data prematurely */ \ + if (!relax) \ + rmb(); \ + return pfx##ioswab##bwlq(__addr, __val); \ +} + +#define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \ + \ +__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1) + +#define BUILDIO_MEM(bwlq, type) \ + \ +__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \ +__BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \ +__BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \ +__BUILD_MEMORY_PFX(, bwlq, type, 0) + +BUILDIO_MEM(b, u8) +BUILDIO_MEM(w, u16) +BUILDIO_MEM(l, u32) +#ifdef CONFIG_64BIT +BUILDIO_MEM(q, u64) +#else +__BUILD_MEMORY_PFX(__raw_, q, u64, 0) +__BUILD_MEMORY_PFX(__mem_, q, u64, 0) +#endif + +#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0, _p) + +#define BUILDIO_IOPORT(bwlq, type) \ + __BUILD_IOPORT_PFX(, bwlq, type) \ + __BUILD_IOPORT_PFX(__mem_, bwlq, type) + +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) +#ifdef CONFIG_64BIT +BUILDIO_IOPORT(q, u64) +#endif + +#define __BUILDIO(bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0) + +__BUILDIO(q, u64) + +#define readb_relaxed __relaxed_readb +#define readw_relaxed __relaxed_readw +#define readl_relaxed __relaxed_readl +#ifdef CONFIG_64BIT +#define readq_relaxed __relaxed_readq +#endif + +#define writeb_relaxed __relaxed_writeb +#define writew_relaxed __relaxed_writew +#define writel_relaxed __relaxed_writel +#ifdef CONFIG_64BIT +#define writeq_relaxed __relaxed_writeq +#endif + +#define readb_be(addr) \ + __raw_readb((__force unsigned *)(addr)) +#define readw_be(addr) \ + be16_to_cpu(__raw_readw((__force unsigned *)(addr))) +#define readl_be(addr) \ + be32_to_cpu(__raw_readl((__force unsigned *)(addr))) +#define readq_be(addr) \ + be64_to_cpu(__raw_readq((__force unsigned *)(addr))) + +#define writeb_be(val, addr) \ + __raw_writeb((val), (__force unsigned *)(addr)) +#define writew_be(val, addr) \ + __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr)) +#define writel_be(val, addr) \ + __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr)) +#define writeq_be(val, addr) \ + __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr)) + +/* + * Some code tests for these symbols + */ +#ifdef CONFIG_64BIT +#define readq readq +#define writeq writeq +#endif + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_read##bwlq(mem); \ + __addr++; \ + } \ +} + +#define __BUILD_IOPORT_STRING(bwlq, type) \ + \ +static inline void outs##bwlq(unsigned long port, const void *addr, \ + unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_out##bwlq(*__addr, port); \ + __addr++; \ + } \ +} \ + \ +static inline void ins##bwlq(unsigned long port, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_in##bwlq(port); \ + __addr++; \ + } \ +} + +#define BUILDSTRING(bwlq, type) \ + \ +__BUILD_MEMORY_STRING(bwlq, type) \ +__BUILD_IOPORT_STRING(bwlq, type) + +BUILDSTRING(b, u8) +BUILDSTRING(w, u16) +BUILDSTRING(l, u32) +#ifdef CONFIG_64BIT +BUILDSTRING(q, u64) +#endif + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +/* + * The caches on some architectures aren't dma-coherent and have need to + * handle this in software. There are three types of operations that + * can be applied to dma buffers. + * + * - dma_cache_wback_inv(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_wback(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_inv(start, size) invalidates the affected parts of the + * caches. Dirty lines of the caches may be written back or simply + * be discarded. This operation is necessary before dma operations + * to the memory. + * + * This API used to be exported; it now is for arch code internal use only. + */ +#ifdef CONFIG_DMA_NONCOHERENT + +extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); +extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); +extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); + +#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size) +#define dma_cache_wback(start, size) _dma_cache_wback(start, size) +#define dma_cache_inv(start, size) _dma_cache_inv(start, size) + +#else /* Sane hardware */ + +#define dma_cache_wback_inv(start,size) \ + do { (void) (start); (void) (size); } while (0) +#define dma_cache_wback(start,size) \ + do { (void) (start); (void) (size); } while (0) +#define dma_cache_inv(start,size) \ + do { (void) (start); (void) (size); } while (0) + +#endif /* CONFIG_DMA_NONCOHERENT */ + +/* + * Read a 32-bit register that requires a 64-bit read cycle on the bus. + * Avoid interrupt mucking, just adjust the address for 4-byte access. + * Assume the addresses are 8-byte aligned. + */ +#ifdef __MIPSEB__ +#define __CSR_32_ADJUST 4 +#else +#define __CSR_32_ADJUST 0 +#endif + +#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v)) +#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) +#define unxlate_dev_mem_ptr(p, v) do { } while (0) + +void __ioread64_copy(void *to, const void __iomem *from, size_t count); + +#endif /* _ASM_IO_H */ |