diff options
Diffstat (limited to 'arch/mips/include/asm/mips-gic.h')
| -rw-r--r-- | arch/mips/include/asm/mips-gic.h | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/arch/mips/include/asm/mips-gic.h b/arch/mips/include/asm/mips-gic.h new file mode 100644 index 0000000000..084cac1c5e --- /dev/null +++ b/arch/mips/include/asm/mips-gic.h @@ -0,0 +1,373 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2017 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#ifndef __MIPS_ASM_MIPS_CPS_H__ +# error Please include asm/mips-cps.h rather than asm/mips-gic.h +#endif + +#ifndef __MIPS_ASM_MIPS_GIC_H__ +#define __MIPS_ASM_MIPS_GIC_H__ + +#include <linux/bitops.h> + +/* The base address of the GIC registers */ +extern void __iomem *mips_gic_base; + +/* Offsets from the GIC base address to various control blocks */ +#define MIPS_GIC_SHARED_OFS 0x00000 +#define MIPS_GIC_SHARED_SZ 0x08000 +#define MIPS_GIC_LOCAL_OFS 0x08000 +#define MIPS_GIC_LOCAL_SZ 0x04000 +#define MIPS_GIC_REDIR_OFS 0x0c000 +#define MIPS_GIC_REDIR_SZ 0x04000 +#define MIPS_GIC_USER_OFS 0x10000 +#define MIPS_GIC_USER_SZ 0x10000 + +/* For read-only shared registers */ +#define GIC_ACCESSOR_RO(sz, off, name) \ + CPS_ACCESSOR_RO(gic, sz, MIPS_GIC_SHARED_OFS + off, name) + +/* For read-write shared registers */ +#define GIC_ACCESSOR_RW(sz, off, name) \ + CPS_ACCESSOR_RW(gic, sz, MIPS_GIC_SHARED_OFS + off, name) + +/* For read-only local registers */ +#define GIC_VX_ACCESSOR_RO(sz, off, name) \ + CPS_ACCESSOR_RO(gic, sz, MIPS_GIC_LOCAL_OFS + off, vl_##name) \ + CPS_ACCESSOR_RO(gic, sz, MIPS_GIC_REDIR_OFS + off, vo_##name) + +/* For read-write local registers */ +#define GIC_VX_ACCESSOR_RW(sz, off, name) \ + CPS_ACCESSOR_RW(gic, sz, MIPS_GIC_LOCAL_OFS + off, vl_##name) \ + CPS_ACCESSOR_RW(gic, sz, MIPS_GIC_REDIR_OFS + off, vo_##name) + +/* For read-only shared per-interrupt registers */ +#define GIC_ACCESSOR_RO_INTR_REG(sz, off, stride, name) \ +static inline void __iomem *addr_gic_##name(unsigned int intr) \ +{ \ + return mips_gic_base + (off) + (intr * (stride)); \ +} \ + \ +static inline unsigned int read_gic_##name(unsigned int intr) \ +{ \ + BUILD_BUG_ON(sz != 32); \ + return __raw_readl(addr_gic_##name(intr)); \ +} + +/* For read-write shared per-interrupt registers */ +#define GIC_ACCESSOR_RW_INTR_REG(sz, off, stride, name) \ + GIC_ACCESSOR_RO_INTR_REG(sz, off, stride, name) \ + \ +static inline void write_gic_##name(unsigned int intr, \ + unsigned int val) \ +{ \ + BUILD_BUG_ON(sz != 32); \ + __raw_writel(val, addr_gic_##name(intr)); \ +} + +/* For read-only local per-interrupt registers */ +#define GIC_VX_ACCESSOR_RO_INTR_REG(sz, off, stride, name) \ + GIC_ACCESSOR_RO_INTR_REG(sz, MIPS_GIC_LOCAL_OFS + off, \ + stride, vl_##name) \ + GIC_ACCESSOR_RO_INTR_REG(sz, MIPS_GIC_REDIR_OFS + off, \ + stride, vo_##name) + +/* For read-write local per-interrupt registers */ +#define GIC_VX_ACCESSOR_RW_INTR_REG(sz, off, stride, name) \ + GIC_ACCESSOR_RW_INTR_REG(sz, MIPS_GIC_LOCAL_OFS + off, \ + stride, vl_##name) \ + GIC_ACCESSOR_RW_INTR_REG(sz, MIPS_GIC_REDIR_OFS + off, \ + stride, vo_##name) + +/* For read-only shared bit-per-interrupt registers */ +#define GIC_ACCESSOR_RO_INTR_BIT(off, name) \ +static inline void __iomem *addr_gic_##name(void) \ +{ \ + return mips_gic_base + (off); \ +} \ + \ +static inline unsigned int read_gic_##name(unsigned int intr) \ +{ \ + void __iomem *addr = addr_gic_##name(); \ + unsigned int val; \ + \ + if (mips_cm_is64) { \ + addr += (intr / 64) * sizeof(uint64_t); \ + val = __raw_readq(addr) >> intr % 64; \ + } else { \ + addr += (intr / 32) * sizeof(uint32_t); \ + val = __raw_readl(addr) >> intr % 32; \ + } \ + \ + return val & 0x1; \ +} + +/* For read-write shared bit-per-interrupt registers */ +#define GIC_ACCESSOR_RW_INTR_BIT(off, name) \ + GIC_ACCESSOR_RO_INTR_BIT(off, name) \ + \ +static inline void write_gic_##name(unsigned int intr) \ +{ \ + void __iomem *addr = addr_gic_##name(); \ + \ + if (mips_cm_is64) { \ + addr += (intr / 64) * sizeof(uint64_t); \ + __raw_writeq(BIT(intr % 64), addr); \ + } else { \ + addr += (intr / 32) * sizeof(uint32_t); \ + __raw_writel(BIT(intr % 32), addr); \ + } \ +} \ + \ +static inline void change_gic_##name(unsigned int intr, \ + unsigned int val) \ +{ \ + void __iomem *addr = addr_gic_##name(); \ + \ + if (mips_cm_is64) { \ + uint64_t _val; \ + \ + addr += (intr / 64) * sizeof(uint64_t); \ + _val = __raw_readq(addr); \ + _val &= ~BIT_ULL(intr % 64); \ + _val |= (uint64_t)val << (intr % 64); \ + __raw_writeq(_val, addr); \ + } else { \ + uint32_t _val; \ + \ + addr += (intr / 32) * sizeof(uint32_t); \ + _val = __raw_readl(addr); \ + _val &= ~BIT(intr % 32); \ + _val |= val << (intr % 32); \ + __raw_writel(_val, addr); \ + } \ +} + +/* For read-only local bit-per-interrupt registers */ +#define GIC_VX_ACCESSOR_RO_INTR_BIT(sz, off, name) \ + GIC_ACCESSOR_RO_INTR_BIT(sz, MIPS_GIC_LOCAL_OFS + off, \ + vl_##name) \ + GIC_ACCESSOR_RO_INTR_BIT(sz, MIPS_GIC_REDIR_OFS + off, \ + vo_##name) + +/* For read-write local bit-per-interrupt registers */ +#define GIC_VX_ACCESSOR_RW_INTR_BIT(sz, off, name) \ + GIC_ACCESSOR_RW_INTR_BIT(sz, MIPS_GIC_LOCAL_OFS + off, \ + vl_##name) \ + GIC_ACCESSOR_RW_INTR_BIT(sz, MIPS_GIC_REDIR_OFS + off, \ + vo_##name) + +/* GIC_SH_CONFIG - Information about the GIC configuration */ +GIC_ACCESSOR_RW(32, 0x000, config) +#define GIC_CONFIG_COUNTSTOP BIT(28) +#define GIC_CONFIG_COUNTBITS GENMASK(27, 24) +#define GIC_CONFIG_NUMINTERRUPTS GENMASK(23, 16) +#define GIC_CONFIG_PVPS GENMASK(6, 0) + +/* GIC_SH_COUNTER - Shared global counter value */ +GIC_ACCESSOR_RW(64, 0x010, counter) +GIC_ACCESSOR_RW(32, 0x010, counter_32l) +GIC_ACCESSOR_RW(32, 0x014, counter_32h) + +/* GIC_SH_POL_* - Configures interrupt polarity */ +GIC_ACCESSOR_RW_INTR_BIT(0x100, pol) +#define GIC_POL_ACTIVE_LOW 0 /* when level triggered */ +#define GIC_POL_ACTIVE_HIGH 1 /* when level triggered */ +#define GIC_POL_FALLING_EDGE 0 /* when single-edge triggered */ +#define GIC_POL_RISING_EDGE 1 /* when single-edge triggered */ + +/* GIC_SH_TRIG_* - Configures interrupts to be edge or level triggered */ +GIC_ACCESSOR_RW_INTR_BIT(0x180, trig) +#define GIC_TRIG_LEVEL 0 +#define GIC_TRIG_EDGE 1 + +/* GIC_SH_DUAL_* - Configures whether interrupts trigger on both edges */ +GIC_ACCESSOR_RW_INTR_BIT(0x200, dual) +#define GIC_DUAL_SINGLE 0 /* when edge-triggered */ +#define GIC_DUAL_DUAL 1 /* when edge-triggered */ + +/* GIC_SH_WEDGE - Write an 'edge', ie. trigger an interrupt */ +GIC_ACCESSOR_RW(32, 0x280, wedge) +#define GIC_WEDGE_RW BIT(31) +#define GIC_WEDGE_INTR GENMASK(7, 0) + +/* GIC_SH_RMASK_* - Reset/clear shared interrupt mask bits */ +GIC_ACCESSOR_RW_INTR_BIT(0x300, rmask) + +/* GIC_SH_SMASK_* - Set shared interrupt mask bits */ +GIC_ACCESSOR_RW_INTR_BIT(0x380, smask) + +/* GIC_SH_MASK_* - Read the current shared interrupt mask */ +GIC_ACCESSOR_RO_INTR_BIT(0x400, mask) + +/* GIC_SH_PEND_* - Read currently pending shared interrupts */ +GIC_ACCESSOR_RO_INTR_BIT(0x480, pend) + +/* GIC_SH_MAPx_PIN - Map shared interrupts to a particular CPU pin */ +GIC_ACCESSOR_RW_INTR_REG(32, 0x500, 0x4, map_pin) +#define GIC_MAP_PIN_MAP_TO_PIN BIT(31) +#define GIC_MAP_PIN_MAP_TO_NMI BIT(30) +#define GIC_MAP_PIN_MAP GENMASK(5, 0) + +/* GIC_SH_MAPx_VP - Map shared interrupts to a particular Virtual Processor */ +GIC_ACCESSOR_RW_INTR_REG(32, 0x2000, 0x20, map_vp) + +/* GIC_Vx_CTL - VP-level interrupt control */ +GIC_VX_ACCESSOR_RW(32, 0x000, ctl) +#define GIC_VX_CTL_FDC_ROUTABLE BIT(4) +#define GIC_VX_CTL_SWINT_ROUTABLE BIT(3) +#define GIC_VX_CTL_PERFCNT_ROUTABLE BIT(2) +#define GIC_VX_CTL_TIMER_ROUTABLE BIT(1) +#define GIC_VX_CTL_EIC BIT(0) + +/* GIC_Vx_PEND - Read currently pending local interrupts */ +GIC_VX_ACCESSOR_RO(32, 0x004, pend) + +/* GIC_Vx_MASK - Read the current local interrupt mask */ +GIC_VX_ACCESSOR_RO(32, 0x008, mask) + +/* GIC_Vx_RMASK - Reset/clear local interrupt mask bits */ +GIC_VX_ACCESSOR_RW(32, 0x00c, rmask) + +/* GIC_Vx_SMASK - Set local interrupt mask bits */ +GIC_VX_ACCESSOR_RW(32, 0x010, smask) + +/* GIC_Vx_*_MAP - Route local interrupts to the desired pins */ +GIC_VX_ACCESSOR_RW_INTR_REG(32, 0x040, 0x4, map) + +/* GIC_Vx_WD_MAP - Route the local watchdog timer interrupt */ +GIC_VX_ACCESSOR_RW(32, 0x040, wd_map) + +/* GIC_Vx_COMPARE_MAP - Route the local count/compare interrupt */ +GIC_VX_ACCESSOR_RW(32, 0x044, compare_map) + +/* GIC_Vx_TIMER_MAP - Route the local CPU timer (cp0 count/compare) interrupt */ +GIC_VX_ACCESSOR_RW(32, 0x048, timer_map) + +/* GIC_Vx_FDC_MAP - Route the local fast debug channel interrupt */ +GIC_VX_ACCESSOR_RW(32, 0x04c, fdc_map) + +/* GIC_Vx_PERFCTR_MAP - Route the local performance counter interrupt */ +GIC_VX_ACCESSOR_RW(32, 0x050, perfctr_map) + +/* GIC_Vx_SWINT0_MAP - Route the local software interrupt 0 */ +GIC_VX_ACCESSOR_RW(32, 0x054, swint0_map) + +/* GIC_Vx_SWINT1_MAP - Route the local software interrupt 1 */ +GIC_VX_ACCESSOR_RW(32, 0x058, swint1_map) + +/* GIC_Vx_OTHER - Configure access to other Virtual Processor registers */ +GIC_VX_ACCESSOR_RW(32, 0x080, other) +#define GIC_VX_OTHER_VPNUM GENMASK(5, 0) + +/* GIC_Vx_IDENT - Retrieve the local Virtual Processor's ID */ +GIC_VX_ACCESSOR_RO(32, 0x088, ident) +#define GIC_VX_IDENT_VPNUM GENMASK(5, 0) + +/* GIC_Vx_COMPARE - Value to compare with GIC_SH_COUNTER */ +GIC_VX_ACCESSOR_RW(64, 0x0a0, compare) + +/* GIC_Vx_EIC_SHADOW_SET_BASE - Set shadow register set for each interrupt */ +GIC_VX_ACCESSOR_RW_INTR_REG(32, 0x100, 0x4, eic_shadow_set) + +/** + * enum mips_gic_local_interrupt - GIC local interrupts + * @GIC_LOCAL_INT_WD: GIC watchdog timer interrupt + * @GIC_LOCAL_INT_COMPARE: GIC count/compare interrupt + * @GIC_LOCAL_INT_TIMER: CP0 count/compare interrupt + * @GIC_LOCAL_INT_PERFCTR: Performance counter interrupt + * @GIC_LOCAL_INT_SWINT0: Software interrupt 0 + * @GIC_LOCAL_INT_SWINT1: Software interrupt 1 + * @GIC_LOCAL_INT_FDC: Fast debug channel interrupt + * @GIC_NUM_LOCAL_INTRS: The number of local interrupts + * + * Enumerates interrupts provided by the GIC that are local to a VP. + */ +enum mips_gic_local_interrupt { + GIC_LOCAL_INT_WD, + GIC_LOCAL_INT_COMPARE, + GIC_LOCAL_INT_TIMER, + GIC_LOCAL_INT_PERFCTR, + GIC_LOCAL_INT_SWINT0, + GIC_LOCAL_INT_SWINT1, + GIC_LOCAL_INT_FDC, + GIC_NUM_LOCAL_INTRS +}; + +/** + * mips_gic_present() - Determine whether a GIC is present + * + * Determines whether a MIPS Global Interrupt Controller (GIC) is present in + * the system that the kernel is running on. + * + * Return true if a GIC is present, else false. + */ +static inline bool mips_gic_present(void) +{ + return IS_ENABLED(CONFIG_MIPS_GIC) && mips_gic_base; +} + +/** + * mips_gic_vx_map_reg() - Return GIC_Vx_<intr>_MAP register offset + * @intr: A GIC local interrupt + * + * Determine the index of the GIC_VL_<intr>_MAP or GIC_VO_<intr>_MAP register + * within the block of GIC map registers. This is almost the same as the order + * of interrupts in the pending & mask registers, as used by enum + * mips_gic_local_interrupt, but moves the FDC interrupt & thus offsets the + * interrupts after it... + * + * Return: The map register index corresponding to @intr. + * + * The return value is suitable for use with the (read|write)_gic_v[lo]_map + * accessor functions. + */ +static inline unsigned int +mips_gic_vx_map_reg(enum mips_gic_local_interrupt intr) +{ + /* WD, Compare & Timer are 1:1 */ + if (intr <= GIC_LOCAL_INT_TIMER) + return intr; + + /* FDC moves to after Timer... */ + if (intr == GIC_LOCAL_INT_FDC) + return GIC_LOCAL_INT_TIMER + 1; + + /* As a result everything else is offset by 1 */ + return intr + 1; +} + +/** + * gic_get_c0_compare_int() - Return cp0 count/compare interrupt virq + * + * Determine the virq number to use for the coprocessor 0 count/compare + * interrupt, which may be routed via the GIC. + * + * Returns the virq number or a negative error number. + */ +extern int gic_get_c0_compare_int(void); + +/** + * gic_get_c0_perfcount_int() - Return performance counter interrupt virq + * + * Determine the virq number to use for CPU performance counter interrupts, + * which may be routed via the GIC. + * + * Returns the virq number or a negative error number. + */ +extern int gic_get_c0_perfcount_int(void); + +/** + * gic_get_c0_fdc_int() - Return fast debug channel interrupt virq + * + * Determine the virq number to use for fast debug channel (FDC) interrupts, + * which may be routed via the GIC. + * + * Returns the virq number or a negative error number. + */ +extern int gic_get_c0_fdc_int(void); + +#endif /* __MIPS_ASM_MIPS_CPS_H__ */ |