diff options
Diffstat (limited to 'arch/mips/include/asm/sibyte/bcm1480_scd.h')
-rw-r--r-- | arch/mips/include/asm/sibyte/bcm1480_scd.h | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h new file mode 100644 index 0000000000..87f37086d5 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h @@ -0,0 +1,393 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ********************************************************************* + * BCM1280/BCM1400 Board Support Package + * + * SCD Constants and Macros File: bcm1480_scd.h + * + * This module contains constants and macros useful for + * manipulating the System Control and Debug module. + * + * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003,2004,2005 + * Broadcom Corporation. All rights reserved. + * + ********************************************************************* */ + +#ifndef _BCM1480_SCD_H +#define _BCM1480_SCD_H + +#include <asm/sibyte/sb1250_defs.h> + +/* ********************************************************************* + * Pull in the BCM1250's SCD since lots of stuff is the same. + ********************************************************************* */ + +#include <asm/sibyte/sb1250_scd.h> + +/* ********************************************************************* + * Some general notes: + * + * This file is basically a "what's new" header file. Since the + * BCM1250 and the new BCM1480 (and derivatives) share many common + * features, this file contains only what's new or changed from + * the 1250. (above, you can see that we include the 1250 symbols + * to get the base functionality). + * + * In software, be sure to use the correct symbols, particularly + * for blocks that are different between the two chip families. + * All BCM1480-specific symbols have _BCM1480_ in their names, + * and all BCM1250-specific and "base" functions that are common in + * both chips have no special names (this is for compatibility with + * older include files). Therefore, if you're working with the + * SCD, which is very different on each chip, A_SCD_xxx implies + * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 + * version. + ********************************************************************* */ + +/* ********************************************************************* + * System control/debug registers + ********************************************************************* */ + +/* + * System Identification and Revision Register (Table 12) + * Register: SCD_SYSTEM_REVISION + * This register is field compatible with the 1250. + */ + +/* + * New part definitions + */ + +#define K_SYS_PART_BCM1480 0x1406 +#define K_SYS_PART_BCM1280 0x1206 +#define K_SYS_PART_BCM1455 0x1407 +#define K_SYS_PART_BCM1255 0x1257 +#define K_SYS_PART_BCM1158 0x1156 + +/* + * Manufacturing Information Register (Table 14) + * Register: SCD_SYSTEM_MANUF + */ + +/* + * System Configuration Register (Table 15) + * Register: SCD_SYSTEM_CFG + * Entire register is different from 1250, all new constants below + */ + +#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) +#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) +#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) +#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) +#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) +#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) + +#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) +#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) +#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) +#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) + +#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) +#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) +#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) +#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) + +#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) +#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) + +#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) +#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) +#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) +#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) +#define K_BCM1480_SYS_BOOT_MODE_ROM32 0 +#define K_BCM1480_SYS_BOOT_MODE_ROM8 1 +#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 +#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 +#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) + +#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) +#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) +#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) +#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) + +#define S_BCM1480_SYS_CONFIG 26 +#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) +#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) +#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) + +#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) + +#define S_BCM1480_SYS_NODEID 47 +#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) +#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) +#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) + +#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) +#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) +#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) +#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) +#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) +#define S_BCM1480_SYS_DISABLECPU0 56 +#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) +#define S_BCM1480_SYS_DISABLECPU1 57 +#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) +#define S_BCM1480_SYS_DISABLECPU2 58 +#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) +#define S_BCM1480_SYS_DISABLECPU3 59 +#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) + +#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) +#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) +#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) +#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) + +/* + * Scratch Register (Table 16) + * Register: SCD_SYSTEM_SCRATCH + * Same as BCM1250 + */ + + +/* + * Mailbox Registers (Table 17) + * Registers: SCD_MBOX_{0,1}_CPU_x + * Same as BCM1250 + */ + + +/* + * See bcm1480_int.h for interrupt mapper registers. + */ + + +/* + * Watchdog Timer Initial Count Registers (Table 23) + * Registers: SCD_WDOG_INIT_CNT_x + * + * The watchdogs are almost the same as the 1250, except + * the configuration register has more bits to control the + * other CPUs. + */ + + +/* + * Watchdog Timer Configuration Registers (Table 25) + * Registers: SCD_WDOG_CFG_x + */ + +#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) + +#define S_BCM1480_SCD_WDOG_RESET_TYPE 2 +#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE) + +#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_BCM1480_SCD_WDOG_RESET_SOFT 1 +#define K_BCM1480_SCD_WDOG_RESET_CPU0 3 +#define K_BCM1480_SCD_WDOG_RESET_CPU1 5 +#define K_BCM1480_SCD_WDOG_RESET_CPU2 9 +#define K_BCM1480_SCD_WDOG_RESET_CPU3 17 +#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 + + +#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) + +/* + * General Timer Initial Count Registers (Table 26) + * Registers: SCD_TIMER_INIT_x + * + * The timer registers are the same as the BCM1250 + */ + + +/* + * ZBbus Count Register (Table 29) + * Register: ZBBUS_CYCLE_COUNT + * + * Same as BCM1250 + */ + +/* + * ZBbus Compare Registers (Table 30) + * Registers: ZBBUS_CYCLE_CPx + * + * Same as BCM1250 + */ + + +/* + * System Performance Counter Configuration Register (Table 31) + * Register: PERF_CNT_CFG_0 + * + * SPC_CFG_SRC[0-3] is the same as the 1250. + * SPC_CFG_SRC[4-7] only exist on the 1480 + * The clear/enable bits are in different locations on the 1250 and 1480. + */ + +#define S_SPC_CFG_SRC4 32 +#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) +#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) +#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) + +#define S_SPC_CFG_SRC5 40 +#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) +#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) +#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) + +#define S_SPC_CFG_SRC6 48 +#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) +#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) +#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) + +#define S_SPC_CFG_SRC7 56 +#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) +#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) +#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) + +/* + * System Performance Counter Control Register (Table 32) + * Register: PERF_CNT_CFG_1 + * BCM1480 specific + */ +#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) +#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR +#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE +#endif + +/* + * System Performance Counters (Table 33) + * Registers: PERF_CNT_x + */ + +#define S_BCM1480_SPC_CNT_COUNT 0 +#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) +#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) +#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) + +#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) + + +/* + * Bus Watcher Error Status Register (Tables 36, 37) + * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG + * Same as BCM1250. + */ + +/* + * Bus Watcher Error Data Registers (Table 38) + * Registers: BUS_ERR_DATA_x + * Same as BCM1250. + */ + +/* + * Bus Watcher L2 ECC Counter Register (Table 39) + * Register: BUS_L2_ERRORS + * Same as BCM1250. + */ + + +/* + * Bus Watcher Memory and I/O Error Counter Register (Table 40) + * Register: BUS_MEM_IO_ERRORS + * Same as BCM1250. + */ + + +/* + * Address Trap Registers + * + * Register layout same as BCM1250, almost. The bus agents + * are different, and the address trap configuration bits are + * slightly different. + */ + +#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0) +#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) + +#define S_BCM1480_ATRAP_CFG_CNT 0 +#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) +#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) +#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) + +#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) +#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) +#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) + +#define S_BCM1480_ATRAP_CFG_AGENTID 8 +#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) +#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) +#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) + + +#define K_BCM1480_BUS_AGENT_CPU0 0 +#define K_BCM1480_BUS_AGENT_CPU1 1 +#define K_BCM1480_BUS_AGENT_NC 2 +#define K_BCM1480_BUS_AGENT_IOB 3 +#define K_BCM1480_BUS_AGENT_SCD 4 +#define K_BCM1480_BUS_AGENT_L2C 6 +#define K_BCM1480_BUS_AGENT_MC 7 +#define K_BCM1480_BUS_AGENT_CPU2 8 +#define K_BCM1480_BUS_AGENT_CPU3 9 +#define K_BCM1480_BUS_AGENT_PM 10 + +#define S_BCM1480_ATRAP_CFG_CATTR 12 +#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) +#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) +#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) + +#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 +#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 +#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 +#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 + +#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) + + +/* + * Trace Event Registers (Table 47) + * Same as BCM1250. + */ + +/* + * Trace Sequence Control Registers (Table 48) + * Registers: TRACE_SEQUENCE_x + * + * Same as BCM1250 except for two new fields. + */ + + +#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) + +#define S_BCM1480_SCD_TRSEQ_SWFUNC 26 +#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) + +/* + * Trace Control Register (Table 49) + * Register: TRACE_CFG + * + * BCM1480 changes to this register (other than location of the CUR_ADDR field) + * are defined below. + */ + +#define S_BCM1480_SCD_TRACE_CFG_MODE 16 +#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) +#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) +#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) + +#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 +#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 +#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 + +#endif /* _BCM1480_SCD_H */ |