diff options
Diffstat (limited to 'arch/mips/lib/memcpy.S')
| -rw-r--r-- | arch/mips/lib/memcpy.S | 704 |
1 files changed, 704 insertions, 0 deletions
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S new file mode 100644 index 0000000000..a4b4e805ff --- /dev/null +++ b/arch/mips/lib/memcpy.S @@ -0,0 +1,704 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Unified implementation of memcpy, memmove and the __copy_user backend. + * + * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc. + * Copyright (C) 2002 Broadcom, Inc. + * memcpy/copy_user author: Mark Vandevoorde + * Copyright (C) 2007 Maciej W. Rozycki + * Copyright (C) 2014 Imagination Technologies Ltd. + * + * Mnemonic names for arguments to memcpy/__copy_user + */ + +/* + * Hack to resolve longstanding prefetch issue + * + * Prefetching may be fatal on some systems if we're prefetching beyond the + * end of memory on some systems. It's also a seriously bad idea on non + * dma-coherent systems. + */ +#ifdef CONFIG_DMA_NONCOHERENT +#undef CONFIG_CPU_HAS_PREFETCH +#endif +#ifdef CONFIG_MIPS_MALTA +#undef CONFIG_CPU_HAS_PREFETCH +#endif +#ifdef CONFIG_CPU_MIPSR6 +#undef CONFIG_CPU_HAS_PREFETCH +#endif + +#include <linux/export.h> +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> + +#define dst a0 +#define src a1 +#define len a2 + +/* + * Spec + * + * memcpy copies len bytes from src to dst and sets v0 to dst. + * It assumes that + * - src and dst don't overlap + * - src is readable + * - dst is writable + * memcpy uses the standard calling convention + * + * __copy_user copies up to len bytes from src to dst and sets a2 (len) to + * the number of uncopied bytes due to an exception caused by a read or write. + * __copy_user assumes that src and dst don't overlap, and that the call is + * implementing one of the following: + * copy_to_user + * - src is readable (no exceptions when reading src) + * copy_from_user + * - dst is writable (no exceptions when writing dst) + * __copy_user uses a non-standard calling convention; see + * include/asm-mips/uaccess.h + * + * When an exception happens on a load, the handler must + # ensure that all of the destination buffer is overwritten to prevent + * leaking information to user mode programs. + */ + +/* + * Implementation + */ + +/* + * The exception handler for loads requires that: + * 1- AT contain the address of the byte just past the end of the source + * of the copy, + * 2- src_entry <= src < AT, and + * 3- (dst - src) == (dst_entry - src_entry), + * The _entry suffix denotes values when __copy_user was called. + * + * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user + * (2) is met by incrementing src by the number of bytes copied + * (3) is met by not doing loads between a pair of increments of dst and src + * + * The exception handlers for stores adjust len (if necessary) and return. + * These handlers do not need to overwrite any data. + * + * For __rmemcpy and memmove an exception is always a kernel bug, therefore + * they're not protected. + */ + +/* Instruction type */ +#define LD_INSN 1 +#define ST_INSN 2 +/* Pretech type */ +#define SRC_PREFETCH 1 +#define DST_PREFETCH 2 +#define LEGACY_MODE 1 +#define EVA_MODE 2 +#define USEROP 1 +#define KERNELOP 2 + +/* + * Wrapper to add an entry in the exception table + * in case the insn causes a memory exception. + * Arguments: + * insn : Load/store instruction + * type : Instruction type + * reg : Register + * addr : Address + * handler : Exception handler + */ + +#define EXC(insn, type, reg, addr, handler) \ + .if \mode == LEGACY_MODE; \ +9: insn reg, addr; \ + .section __ex_table,"a"; \ + PTR_WD 9b, handler; \ + .previous; \ + /* This is assembled in EVA mode */ \ + .else; \ + /* If loading from user or storing to user */ \ + .if ((\from == USEROP) && (type == LD_INSN)) || \ + ((\to == USEROP) && (type == ST_INSN)); \ +9: __BUILD_EVA_INSN(insn##e, reg, addr); \ + .section __ex_table,"a"; \ + PTR_WD 9b, handler; \ + .previous; \ + .else; \ + /* \ + * Still in EVA, but no need for \ + * exception handler or EVA insn \ + */ \ + insn reg, addr; \ + .endif; \ + .endif + +/* + * Only on the 64-bit kernel we can made use of 64-bit registers. + */ +#ifdef CONFIG_64BIT +#define USE_DOUBLE +#endif + +#ifdef USE_DOUBLE + +#define LOADK ld /* No exception */ +#define LOAD(reg, addr, handler) EXC(ld, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(ldl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(ldr, LD_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(sdl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(sdr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sd, ST_INSN, reg, addr, handler) +#define ADD daddu +#define SUB dsubu +#define SRL dsrl +#define SRA dsra +#define SLL dsll +#define SLLV dsllv +#define SRLV dsrlv +#define NBYTES 8 +#define LOG_NBYTES 3 + +/* + * As we are sharing code base with the mips32 tree (which use the o32 ABI + * register definitions). We need to redefine the register definitions from + * the n64 ABI register naming to the o32 ABI register naming. + */ +#undef t0 +#undef t1 +#undef t2 +#undef t3 +#define t0 $8 +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 + +#else + +#define LOADK lw /* No exception */ +#define LOAD(reg, addr, handler) EXC(lw, LD_INSN, reg, addr, handler) +#define LOADL(reg, addr, handler) EXC(lwl, LD_INSN, reg, addr, handler) +#define LOADR(reg, addr, handler) EXC(lwr, LD_INSN, reg, addr, handler) +#define STOREL(reg, addr, handler) EXC(swl, ST_INSN, reg, addr, handler) +#define STORER(reg, addr, handler) EXC(swr, ST_INSN, reg, addr, handler) +#define STORE(reg, addr, handler) EXC(sw, ST_INSN, reg, addr, handler) +#define ADD addu +#define SUB subu +#define SRL srl +#define SLL sll +#define SRA sra +#define SLLV sllv +#define SRLV srlv +#define NBYTES 4 +#define LOG_NBYTES 2 + +#endif /* USE_DOUBLE */ + +#define LOADB(reg, addr, handler) EXC(lb, LD_INSN, reg, addr, handler) +#define STOREB(reg, addr, handler) EXC(sb, ST_INSN, reg, addr, handler) + +#ifdef CONFIG_CPU_HAS_PREFETCH +# define _PREF(hint, addr, type) \ + .if \mode == LEGACY_MODE; \ + kernel_pref(hint, addr); \ + .else; \ + .if ((\from == USEROP) && (type == SRC_PREFETCH)) || \ + ((\to == USEROP) && (type == DST_PREFETCH)); \ + /* \ + * PREFE has only 9 bits for the offset \ + * compared to PREF which has 16, so it may \ + * need to use the $at register but this \ + * register should remain intact because it's \ + * used later on. Therefore use $v1. \ + */ \ + .set at=v1; \ + user_pref(hint, addr); \ + .set noat; \ + .else; \ + kernel_pref(hint, addr); \ + .endif; \ + .endif +#else +# define _PREF(hint, addr, type) +#endif + +#define PREFS(hint, addr) _PREF(hint, addr, SRC_PREFETCH) +#define PREFD(hint, addr) _PREF(hint, addr, DST_PREFETCH) + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define LDFIRST LOADR +#define LDREST LOADL +#define STFIRST STORER +#define STREST STOREL +#define SHIFT_DISCARD SLLV +#else +#define LDFIRST LOADL +#define LDREST LOADR +#define STFIRST STOREL +#define STREST STORER +#define SHIFT_DISCARD SRLV +#endif + +#define FIRST(unit) ((unit)*NBYTES) +#define REST(unit) (FIRST(unit)+NBYTES-1) +#define UNIT(unit) FIRST(unit) + +#define ADDRMASK (NBYTES-1) + + .text + .set noreorder +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS + .set noat +#else + .set at=v1 +#endif + + .align 5 + + /* + * Macro to build the __copy_user common code + * Arguments: + * mode : LEGACY_MODE or EVA_MODE + * from : Source operand. USEROP or KERNELOP + * to : Destination operand. USEROP or KERNELOP + */ + .macro __BUILD_COPY_USER mode, from, to + + /* initialize __memcpy if this the first time we execute this macro */ + .ifnotdef __memcpy + .set __memcpy, 1 + .hidden __memcpy /* make sure it does not leak */ + .endif + + /* + * Note: dst & src may be unaligned, len may be 0 + * Temps + */ +#define rem t8 + + R10KCBARRIER(0(ra)) + /* + * The "issue break"s below are very approximate. + * Issue delays for dcache fills will perturb the schedule, as will + * load queue full replay traps, etc. + * + * If len < NBYTES use byte operations. + */ + PREFS( 0, 0(src) ) + PREFD( 1, 0(dst) ) + sltu t2, len, NBYTES + and t1, dst, ADDRMASK + PREFS( 0, 1*32(src) ) + PREFD( 1, 1*32(dst) ) + bnez t2, .Lcopy_bytes_checklen\@ + and t0, src, ADDRMASK + PREFS( 0, 2*32(src) ) + PREFD( 1, 2*32(dst) ) +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR + bnez t1, .Ldst_unaligned\@ + nop + bnez t0, .Lsrc_unaligned_dst_aligned\@ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ + or t0, t0, t1 + bnez t0, .Lcopy_unaligned_bytes\@ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + /* + * use delay slot for fall-through + * src and dst are aligned; need to compute rem + */ +.Lboth_aligned\@: + SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter + beqz t0, .Lcleanup_both_aligned\@ # len < 8*NBYTES + and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) + PREFS( 0, 3*32(src) ) + PREFD( 1, 3*32(dst) ) + .align 4 +1: + R10KCBARRIER(0(ra)) + LOAD(t0, UNIT(0)(src), .Ll_exc\@) + LOAD(t1, UNIT(1)(src), .Ll_exc_copy\@) + LOAD(t2, UNIT(2)(src), .Ll_exc_copy\@) + LOAD(t3, UNIT(3)(src), .Ll_exc_copy\@) + SUB len, len, 8*NBYTES + LOAD(t4, UNIT(4)(src), .Ll_exc_copy\@) + LOAD(t7, UNIT(5)(src), .Ll_exc_copy\@) + STORE(t0, UNIT(0)(dst), .Ls_exc_p8u\@) + STORE(t1, UNIT(1)(dst), .Ls_exc_p7u\@) + LOAD(t0, UNIT(6)(src), .Ll_exc_copy\@) + LOAD(t1, UNIT(7)(src), .Ll_exc_copy\@) + ADD src, src, 8*NBYTES + ADD dst, dst, 8*NBYTES + STORE(t2, UNIT(-6)(dst), .Ls_exc_p6u\@) + STORE(t3, UNIT(-5)(dst), .Ls_exc_p5u\@) + STORE(t4, UNIT(-4)(dst), .Ls_exc_p4u\@) + STORE(t7, UNIT(-3)(dst), .Ls_exc_p3u\@) + STORE(t0, UNIT(-2)(dst), .Ls_exc_p2u\@) + STORE(t1, UNIT(-1)(dst), .Ls_exc_p1u\@) + PREFS( 0, 8*32(src) ) + PREFD( 1, 8*32(dst) ) + bne len, rem, 1b + nop + + /* + * len == rem == the number of bytes left to copy < 8*NBYTES + */ +.Lcleanup_both_aligned\@: + beqz len, .Ldone\@ + sltu t0, len, 4*NBYTES + bnez t0, .Lless_than_4units\@ + and rem, len, (NBYTES-1) # rem = len % NBYTES + /* + * len >= 4*NBYTES + */ + LOAD( t0, UNIT(0)(src), .Ll_exc\@) + LOAD( t1, UNIT(1)(src), .Ll_exc_copy\@) + LOAD( t2, UNIT(2)(src), .Ll_exc_copy\@) + LOAD( t3, UNIT(3)(src), .Ll_exc_copy\@) + SUB len, len, 4*NBYTES + ADD src, src, 4*NBYTES + R10KCBARRIER(0(ra)) + STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@) + STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@) + STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@) + STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES + beqz len, .Ldone\@ + .set noreorder +.Lless_than_4units\@: + /* + * rem = len % NBYTES + */ + beq rem, len, .Lcopy_bytes\@ + nop +1: + R10KCBARRIER(0(ra)) + LOAD(t0, 0(src), .Ll_exc\@) + ADD src, src, NBYTES + SUB len, len, NBYTES + STORE(t0, 0(dst), .Ls_exc_p1u\@) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES + bne rem, len, 1b + .set noreorder + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR + /* + * src and dst are aligned, need to copy rem bytes (rem < NBYTES) + * A loop would do only a byte at a time with possible branch + * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE + * because can't assume read-access to dst. Instead, use + * STREST dst, which doesn't require read access to dst. + * + * This code should perform better than a simple loop on modern, + * wide-issue mips processors because the code has fewer branches and + * more instruction-level parallelism. + */ +#define bits t2 + beqz len, .Ldone\@ + ADD t1, dst, len # t1 is just past last byte of dst + li bits, 8*NBYTES + SLL rem, len, 3 # rem = number of bits to keep + LOAD(t0, 0(src), .Ll_exc\@) + SUB bits, bits, rem # bits = number of bits to discard + SHIFT_DISCARD t0, t0, bits + STREST(t0, -1(t1), .Ls_exc\@) + jr ra + move len, zero +.Ldst_unaligned\@: + /* + * dst is unaligned + * t0 = src & ADDRMASK + * t1 = dst & ADDRMASK; T1 > 0 + * len >= NBYTES + * + * Copy enough bytes to align dst + * Set match = (src and dst have same alignment) + */ +#define match rem + LDFIRST(t3, FIRST(0)(src), .Ll_exc\@) + ADD t2, zero, NBYTES + LDREST(t3, REST(0)(src), .Ll_exc_copy\@) + SUB t2, t2, t1 # t2 = number of bytes copied + xor match, t0, t1 + R10KCBARRIER(0(ra)) + STFIRST(t3, FIRST(0)(dst), .Ls_exc\@) + beq len, t2, .Ldone\@ + SUB len, len, t2 + ADD dst, dst, t2 + beqz match, .Lboth_aligned\@ + ADD src, src, t2 + +.Lsrc_unaligned_dst_aligned\@: + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + PREFS( 0, 3*32(src) ) + beqz t0, .Lcleanup_src_unaligned\@ + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES + PREFD( 1, 3*32(dst) ) +1: +/* + * Avoid consecutive LD*'s to the same register since some mips + * implementations can't issue them in the same cycle. + * It's OK to load FIRST(N+1) before REST(N) because the two addresses + * are to the same unit (unless src is aligned, but it's not). + */ + R10KCBARRIER(0(ra)) + LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) + LDFIRST(t1, FIRST(1)(src), .Ll_exc_copy\@) + SUB len, len, 4*NBYTES + LDREST(t0, REST(0)(src), .Ll_exc_copy\@) + LDREST(t1, REST(1)(src), .Ll_exc_copy\@) + LDFIRST(t2, FIRST(2)(src), .Ll_exc_copy\@) + LDFIRST(t3, FIRST(3)(src), .Ll_exc_copy\@) + LDREST(t2, REST(2)(src), .Ll_exc_copy\@) + LDREST(t3, REST(3)(src), .Ll_exc_copy\@) + PREFS( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) + ADD src, src, 4*NBYTES +#ifdef CONFIG_CPU_SB1 + nop # improves slotting +#endif + STORE(t0, UNIT(0)(dst), .Ls_exc_p4u\@) + STORE(t1, UNIT(1)(dst), .Ls_exc_p3u\@) + STORE(t2, UNIT(2)(dst), .Ls_exc_p2u\@) + STORE(t3, UNIT(3)(dst), .Ls_exc_p1u\@) + PREFD( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) + .set reorder /* DADDI_WAR */ + ADD dst, dst, 4*NBYTES + bne len, rem, 1b + .set noreorder + +.Lcleanup_src_unaligned\@: + beqz len, .Ldone\@ + and rem, len, NBYTES-1 # rem = len % NBYTES + beq rem, len, .Lcopy_bytes\@ + nop +1: + R10KCBARRIER(0(ra)) + LDFIRST(t0, FIRST(0)(src), .Ll_exc\@) + LDREST(t0, REST(0)(src), .Ll_exc_copy\@) + ADD src, src, NBYTES + SUB len, len, NBYTES + STORE(t0, 0(dst), .Ls_exc_p1u\@) + .set reorder /* DADDI_WAR */ + ADD dst, dst, NBYTES + bne len, rem, 1b + .set noreorder + +#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */ +.Lcopy_bytes_checklen\@: + beqz len, .Ldone\@ + nop +.Lcopy_bytes\@: + /* 0 < len < NBYTES */ + R10KCBARRIER(0(ra)) +#define COPY_BYTE(N) \ + LOADB(t0, N(src), .Ll_exc\@); \ + SUB len, len, 1; \ + beqz len, .Ldone\@; \ + STOREB(t0, N(dst), .Ls_exc_p1\@) + + COPY_BYTE(0) + COPY_BYTE(1) +#ifdef USE_DOUBLE + COPY_BYTE(2) + COPY_BYTE(3) + COPY_BYTE(4) + COPY_BYTE(5) +#endif + LOADB(t0, NBYTES-2(src), .Ll_exc\@) + SUB len, len, 1 + jr ra + STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@) +.Ldone\@: + jr ra + nop + +#ifdef CONFIG_CPU_NO_LOAD_STORE_LR +.Lcopy_unaligned_bytes\@: +1: + COPY_BYTE(0) + COPY_BYTE(1) + COPY_BYTE(2) + COPY_BYTE(3) + COPY_BYTE(4) + COPY_BYTE(5) + COPY_BYTE(6) + COPY_BYTE(7) + ADD src, src, 8 + b 1b + ADD dst, dst, 8 +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + .if __memcpy == 1 + END(memcpy) + .set __memcpy, 0 + .hidden __memcpy + .endif + +.Ll_exc_copy\@: + /* + * Copy bytes from src until faulting load address (or until a + * lb faults) + * + * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28) + * may be more than a byte beyond the last address. + * Hence, the lb below may get an exception. + * + * Assumes src < THREAD_BUADDR($28) + */ + LOADK t0, TI_TASK($28) + nop + LOADK t0, THREAD_BUADDR(t0) +1: + LOADB(t1, 0(src), .Ll_exc\@) + ADD src, src, 1 + sb t1, 0(dst) # can't fault -- we're copy_from_user + .set reorder /* DADDI_WAR */ + ADD dst, dst, 1 + bne src, t0, 1b + .set noreorder +.Ll_exc\@: + LOADK t0, TI_TASK($28) + nop + LOADK t0, THREAD_BUADDR(t0) # t0 is just past last good address + nop + SUB len, AT, t0 # len number of uncopied bytes + jr ra + nop + +#define SEXC(n) \ + .set reorder; /* DADDI_WAR */ \ +.Ls_exc_p ## n ## u\@: \ + ADD len, len, n*NBYTES; \ + jr ra; \ + .set noreorder + +SEXC(8) +SEXC(7) +SEXC(6) +SEXC(5) +SEXC(4) +SEXC(3) +SEXC(2) +SEXC(1) + +.Ls_exc_p1\@: + .set reorder /* DADDI_WAR */ + ADD len, len, 1 + jr ra + .set noreorder +.Ls_exc\@: + jr ra + nop + .endm + +#ifndef CONFIG_HAVE_PLAT_MEMCPY + .align 5 +LEAF(memmove) +EXPORT_SYMBOL(memmove) + ADD t0, a0, a2 + ADD t1, a1, a2 + sltu t0, a1, t0 # dst + len <= src -> memcpy + sltu t1, a0, t1 # dst >= src + len -> memcpy + and t0, t1 + beqz t0, .L__memcpy + move v0, a0 /* return value */ + beqz a2, .Lr_out + END(memmove) + + /* fall through to __rmemcpy */ +LEAF(__rmemcpy) /* a0=dst a1=src a2=len */ + sltu t0, a1, a0 + beqz t0, .Lr_end_bytes_up # src >= dst + nop + ADD a0, a2 # dst = dst + len + ADD a1, a2 # src = src + len + +.Lr_end_bytes: + R10KCBARRIER(0(ra)) + lb t0, -1(a1) + SUB a2, a2, 0x1 + sb t0, -1(a0) + SUB a1, a1, 0x1 + .set reorder /* DADDI_WAR */ + SUB a0, a0, 0x1 + bnez a2, .Lr_end_bytes + .set noreorder + +.Lr_out: + jr ra + move a2, zero + +.Lr_end_bytes_up: + R10KCBARRIER(0(ra)) + lb t0, (a1) + SUB a2, a2, 0x1 + sb t0, (a0) + ADD a1, a1, 0x1 + .set reorder /* DADDI_WAR */ + ADD a0, a0, 0x1 + bnez a2, .Lr_end_bytes_up + .set noreorder + + jr ra + move a2, zero + END(__rmemcpy) + +/* + * A combined memcpy/__copy_user + * __copy_user sets len to 0 for success; else to an upper bound of + * the number of uncopied bytes. + * memcpy sets v0 to dst. + */ + .align 5 +LEAF(memcpy) /* a0=dst a1=src a2=len */ +EXPORT_SYMBOL(memcpy) + move v0, dst /* return value */ +.L__memcpy: +#ifndef CONFIG_EVA +FEXPORT(__raw_copy_from_user) +EXPORT_SYMBOL(__raw_copy_from_user) +FEXPORT(__raw_copy_to_user) +EXPORT_SYMBOL(__raw_copy_to_user) +#endif + /* Legacy Mode, user <-> user */ + __BUILD_COPY_USER LEGACY_MODE USEROP USEROP + +#endif + +#ifdef CONFIG_EVA + +/* + * For EVA we need distinct symbols for reading and writing to user space. + * This is because we need to use specific EVA instructions to perform the + * virtual <-> physical translation when a virtual address is actually in user + * space + */ + +/* + * __copy_from_user (EVA) + */ + +LEAF(__raw_copy_from_user) +EXPORT_SYMBOL(__raw_copy_from_user) + __BUILD_COPY_USER EVA_MODE USEROP KERNELOP +END(__raw_copy_from_user) + + + +/* + * __copy_to_user (EVA) + */ + +LEAF(__raw_copy_to_user) +EXPORT_SYMBOL(__raw_copy_to_user) +__BUILD_COPY_USER EVA_MODE KERNELOP USEROP +END(__raw_copy_to_user) + +#endif |