summaryrefslogtreecommitdiffstats
path: root/arch/mips/loongson32/common
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/loongson32/common')
-rw-r--r--arch/mips/loongson32/common/Makefile6
-rw-r--r--arch/mips/loongson32/common/irq.c191
-rw-r--r--arch/mips/loongson32/common/platform.c287
-rw-r--r--arch/mips/loongson32/common/prom.c42
-rw-r--r--arch/mips/loongson32/common/setup.c26
-rw-r--r--arch/mips/loongson32/common/time.c23
6 files changed, 575 insertions, 0 deletions
diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile
new file mode 100644
index 0000000000..f3950d3081
--- /dev/null
+++ b/arch/mips/loongson32/common/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y += time.o irq.o platform.o prom.o setup.o
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
new file mode 100644
index 0000000000..9a50070f74
--- /dev/null
+++ b/arch/mips/loongson32/common/irq.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+#define LS1X_INTC_REG(n, x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
+
+#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
+#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
+#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
+#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
+#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
+#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
+
+static void ls1x_irq_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_mask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static void ls1x_irq_mask_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_unmask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ | (1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip ls1x_irq_chip = {
+ .name = "LS1X-INTC",
+ .irq_ack = ls1x_irq_ack,
+ .irq_mask = ls1x_irq_mask,
+ .irq_mask_ack = ls1x_irq_mask_ack,
+ .irq_unmask = ls1x_irq_unmask,
+ .irq_set_type = ls1x_irq_settype,
+};
+
+static void ls1x_irq_dispatch(int n)
+{
+ u32 int_status, irq;
+
+ /* Get pending sources, masked by current enables */
+ int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
+ __raw_readl(LS1X_INTC_INTIEN(n));
+
+ if (int_status) {
+ irq = LS1X_IRQ(n, __ffs(int_status));
+ do_IRQ(irq);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (pending & CAUSEF_IP7)
+ do_IRQ(TIMER_IRQ);
+ else if (pending & CAUSEF_IP2)
+ ls1x_irq_dispatch(0); /* INT0 */
+ else if (pending & CAUSEF_IP3)
+ ls1x_irq_dispatch(1); /* INT1 */
+ else if (pending & CAUSEF_IP4)
+ ls1x_irq_dispatch(2); /* INT2 */
+ else if (pending & CAUSEF_IP5)
+ ls1x_irq_dispatch(3); /* INT3 */
+ else if (pending & CAUSEF_IP6)
+ ls1x_irq_dispatch(4); /* INT4 */
+ else
+ spurious_interrupt();
+
+}
+
+static void __init ls1x_irq_init(int base)
+{
+ int n;
+
+ /* Disable interrupts and clear pending,
+ * setup all IRQs as high level triggered
+ */
+ for (n = 0; n < INTN; n++) {
+ __raw_writel(0x0, LS1X_INTC_INTIEN(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
+ /* set DMA0, DMA1 and DMA2 to edge trigger */
+ __raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
+ }
+
+
+ for (n = base; n < NR_IRQS; n++) {
+ irq_set_chip_and_handler(n, &ls1x_irq_chip,
+ handle_level_irq);
+ }
+
+ if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("Failed to request irq %d (cascade)\n", INT0_IRQ);
+ if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("Failed to request irq %d (cascade)\n", INT1_IRQ);
+ if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("Failed to request irq %d (cascade)\n", INT2_IRQ);
+ if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("Failed to request irq %d (cascade)\n", INT3_IRQ);
+#if defined(CONFIG_LOONGSON1_LS1C)
+ if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("Failed to request irq %d (cascade)\n", INT4_IRQ);
+#endif
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ls1x_irq_init(LS1X_IRQ_BASE);
+}
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
new file mode 100644
index 0000000000..8075590a9f
--- /dev/null
+++ b/arch/mips/loongson32/common/platform.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+#include <linux/phy.h>
+#include <linux/serial_8250.h>
+#include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
+
+#include <platform.h>
+#include <loongson1.h>
+#include <dma.h>
+#include <nand.h>
+
+/* 8250/16550 compatible UART */
+#define LS1X_UART(_id) \
+ { \
+ .mapbase = LS1X_UART ## _id ## _BASE, \
+ .irq = LS1X_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
+ LS1X_UART(0),
+ LS1X_UART(1),
+ LS1X_UART(2),
+ LS1X_UART(3),
+ {},
+};
+
+struct platform_device ls1x_uart_pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ls1x_serial8250_pdata,
+ },
+};
+
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(clk)) {
+ pr_err("unable to get %s clock, err=%ld",
+ pdev->name, PTR_ERR(clk));
+ return;
+ }
+ clk_prepare_enable(clk);
+
+ for (p = pdev->dev.platform_data; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
+
+/* Synopsys Ethernet GMAC */
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+ .phy_mask = 0,
+};
+
+static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
+ .pbl = 1,
+};
+
+int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
+{
+ struct plat_stmmacenet_data *plat_dat = NULL;
+ u32 val;
+
+ val = __raw_readl(LS1X_MUX_CTRL1);
+
+#if defined(CONFIG_LOONGSON1_LS1B)
+ plat_dat = dev_get_platdata(&pdev->dev);
+ if (plat_dat->bus_id) {
+ __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
+ GMAC1_USE_UART0, LS1X_MUX_CTRL0);
+ switch (plat_dat->phy_interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->phy_interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC1_SHUT;
+ } else {
+ switch (plat_dat->phy_interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->phy_interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC0_SHUT;
+ }
+ __raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ plat_dat = dev_get_platdata(&pdev->dev);
+
+ val &= ~PHY_INTF_SELI;
+ if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
+ val |= 0x4 << PHY_INTF_SELI_SHIFT;
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ val = __raw_readl(LS1X_MUX_CTRL0);
+ __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
+
+ return 0;
+}
+
+static struct plat_stmmacenet_data ls1x_eth0_pdata = {
+ .bus_id = 0,
+ .phy_addr = -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ .phy_interface = PHY_INTERFACE_MODE_RMII,
+#endif
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth0_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC0_BASE,
+ .end = LS1X_GMAC0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth0_pdev = {
+ .name = "stmmaceth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
+ .resource = ls1x_eth0_resources,
+ .dev = {
+ .platform_data = &ls1x_eth0_pdata,
+ },
+};
+
+#ifdef CONFIG_LOONGSON1_LS1B
+static struct plat_stmmacenet_data ls1x_eth1_pdata = {
+ .bus_id = 1,
+ .phy_addr = -1,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth1_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC1_BASE,
+ .end = LS1X_GMAC1_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth1_pdev = {
+ .name = "stmmaceth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
+ .resource = ls1x_eth1_resources,
+ .dev = {
+ .platform_data = &ls1x_eth1_pdata,
+ },
+};
+#endif /* CONFIG_LOONGSON1_LS1B */
+
+/* GPIO */
+static struct resource ls1x_gpio0_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO0_BASE,
+ .end = LS1X_GPIO0_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio0_pdev = {
+ .name = "ls1x-gpio",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
+ .resource = ls1x_gpio0_resources,
+};
+
+static struct resource ls1x_gpio1_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO1_BASE,
+ .end = LS1X_GPIO1_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio1_pdev = {
+ .name = "ls1x-gpio",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
+ .resource = ls1x_gpio1_resources,
+};
+
+/* USB EHCI */
+static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ls1x_ehci_resources[] = {
+ [0] = {
+ .start = LS1X_EHCI_BASE,
+ .end = LS1X_EHCI_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_EHCI_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
+struct platform_device ls1x_ehci_pdev = {
+ .name = "ehci-platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
+ .resource = ls1x_ehci_resources,
+ .dev = {
+ .dma_mask = &ls1x_ehci_dmamask,
+ .platform_data = &ls1x_ehci_pdata,
+ },
+};
+
+/* Real Time Clock */
+struct platform_device ls1x_rtc_pdev = {
+ .name = "ls1x-rtc",
+ .id = -1,
+};
+
+/* Watchdog */
+static struct resource ls1x_wdt_resources[] = {
+ {
+ .start = LS1X_WDT_BASE,
+ .end = LS1X_WDT_BASE + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_wdt_pdev = {
+ .name = "ls1x-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_wdt_resources),
+ .resource = ls1x_wdt_resources,
+};
diff --git a/arch/mips/loongson32/common/prom.c b/arch/mips/loongson32/common/prom.c
new file mode 100644
index 0000000000..fc580a2274
--- /dev/null
+++ b/arch/mips/loongson32/common/prom.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Modified from arch/mips/pnx833x/common/prom.c.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/serial_reg.h>
+#include <asm/fw/fw.h>
+
+#include <loongson1.h>
+
+unsigned long memsize;
+
+void __init prom_init(void)
+{
+ void __iomem *uart_base;
+
+ fw_init_cmdline();
+
+ memsize = fw_getenvl("memsize");
+ if(!memsize)
+ memsize = DEFAULT_MEMSIZE;
+
+ if (strstr(arcs_cmdline, "console=ttyS3"))
+ uart_base = ioremap(LS1X_UART3_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS2"))
+ uart_base = ioremap(LS1X_UART2_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS1"))
+ uart_base = ioremap(LS1X_UART1_BASE, 0x0f);
+ else
+ uart_base = ioremap(LS1X_UART0_BASE, 0x0f);
+ setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
+}
+
+void __init plat_mem_setup(void)
+{
+ memblock_add(0x0, (memsize << 20));
+}
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
new file mode 100644
index 0000000000..4733fe0371
--- /dev/null
+++ b/arch/mips/loongson32/common/setup.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/cpu-info.h>
+#include <asm/bootinfo.h>
+
+const char *get_system_type(void)
+{
+ unsigned int processor_id = (&current_cpu_data)->processor_id;
+
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+#if defined(CONFIG_LOONGSON1_LS1B)
+ return "LOONGSON LS1B";
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ return "LOONGSON LS1C";
+#endif
+ default:
+ return "LOONGSON (unknown)";
+ }
+}
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
new file mode 100644
index 0000000000..74ad2b1791
--- /dev/null
+++ b/arch/mips/loongson32/common/time.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/of_clk.h>
+#include <asm/time.h>
+
+void __init plat_time_init(void)
+{
+ struct clk *clk = NULL;
+
+ /* initialize LS1X clocks */
+ of_clk_init(NULL);
+
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(clk))
+ panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 16:31:32 +0000