diff options
Diffstat (limited to 'arch/mips/pci/pci-lantiq.c')
| -rw-r--r-- | arch/mips/pci/pci-lantiq.c | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c new file mode 100644 index 0000000000..80f7293166 --- /dev/null +++ b/arch/mips/pci/pci-lantiq.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * Copyright (C) 2010 John Crispin <john@phrozen.org> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_pci.h> +#include <linux/platform_device.h> + +#include <asm/addrspace.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> + +#include "pci-lantiq.h" + +#define PCI_CR_FCI_ADDR_MAP0 0x00C0 +#define PCI_CR_FCI_ADDR_MAP1 0x00C4 +#define PCI_CR_FCI_ADDR_MAP2 0x00C8 +#define PCI_CR_FCI_ADDR_MAP3 0x00CC +#define PCI_CR_FCI_ADDR_MAP4 0x00D0 +#define PCI_CR_FCI_ADDR_MAP5 0x00D4 +#define PCI_CR_FCI_ADDR_MAP6 0x00D8 +#define PCI_CR_FCI_ADDR_MAP7 0x00DC +#define PCI_CR_CLK_CTRL 0x0000 +#define PCI_CR_PCI_MOD 0x0030 +#define PCI_CR_PC_ARB 0x0080 +#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4 +#define PCI_CR_BAR11MASK 0x0044 +#define PCI_CR_BAR12MASK 0x0048 +#define PCI_CR_BAR13MASK 0x004C +#define PCI_CS_BASE_ADDR1 0x0010 +#define PCI_CR_PCI_ADDR_MAP11 0x0064 +#define PCI_CR_FCI_BURST_LENGTH 0x00E8 +#define PCI_CR_PCI_EOI 0x002C +#define PCI_CS_STS_CMD 0x0004 + +#define PCI_MASTER0_REQ_MASK_2BITS 8 +#define PCI_MASTER1_REQ_MASK_2BITS 10 +#define PCI_MASTER2_REQ_MASK_2BITS 12 +#define INTERNAL_ARB_ENABLE_BIT 0 + +#define LTQ_CGU_IFCCR 0x0018 +#define LTQ_CGU_PCICR 0x0034 + +#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y)) +#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x)) + +#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) +#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) + +__iomem void *ltq_pci_mapped_cfg; +static __iomem void *ltq_pci_membase; + +static struct gpio_desc *reset_gpio; +static struct clk *clk_pci, *clk_external; +static struct resource pci_io_resource; +static struct resource pci_mem_resource; +static struct pci_ops pci_ops = { + .read = ltq_pci_read_config_dword, + .write = ltq_pci_write_config_dword +}; + +static struct pci_controller pci_controller = { + .pci_ops = &pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &pci_io_resource, + .io_offset = 0x00000000UL, +}; + +static inline u32 ltq_calc_bar11mask(void) +{ + u32 mem, bar11mask; + + /* BAR11MASK value depends on available memory on system. */ + mem = get_num_physpages() * PAGE_SIZE; + bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; + + return bar11mask; +} + +static int ltq_pci_startup(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + const __be32 *req_mask, *bus_clk; + u32 temp_buffer; + int error; + + /* get our clocks */ + clk_pci = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk_pci)) { + dev_err(&pdev->dev, "failed to get pci clock\n"); + return PTR_ERR(clk_pci); + } + + clk_external = clk_get(&pdev->dev, "external"); + if (IS_ERR(clk_external)) { + clk_put(clk_pci); + dev_err(&pdev->dev, "failed to get external pci clock\n"); + return PTR_ERR(clk_external); + } + + /* read the bus speed that we want */ + bus_clk = of_get_property(node, "lantiq,bus-clock", NULL); + if (bus_clk) + clk_set_rate(clk_pci, *bus_clk); + + /* and enable the clocks */ + clk_enable(clk_pci); + if (of_property_read_bool(node, "lantiq,external-clock")) + clk_enable(clk_external); + else + clk_disable(clk_external); + + /* setup reset gpio used by pci */ + reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", + GPIOD_OUT_LOW); + error = PTR_ERR_OR_ZERO(reset_gpio); + if (error) { + dev_err(&pdev->dev, "failed to request gpio: %d\n", error); + return error; + } + gpiod_set_consumer_name(reset_gpio, "pci_reset"); + + /* enable auto-switching between PCI and EBU */ + ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); + + /* busy, i.e. configuration is not done, PCI access has to be retried */ + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); + wmb(); + /* BUS Master/IO/MEM access */ + ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); + + /* enable external 2 PCI masters */ + temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB); + /* setup the request mask */ + req_mask = of_get_property(node, "req-mask", NULL); + if (req_mask) + temp_buffer &= ~((*req_mask & 0xf) << 16); + else + temp_buffer &= ~0xf0000; + /* enable internal arbiter */ + temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); + /* enable internal PCI master reqest */ + temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); + + /* enable EBU request */ + temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); + + /* enable all external masters request */ + temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); + ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB); + wmb(); + + /* setup BAR memory regions */ + ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); + ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); + ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); + ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); + ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); + ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); + ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); + ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); + ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); + ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK); + ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11); + ltq_pci_w32(0, PCI_CS_BASE_ADDR1); + /* both TX and RX endian swap are enabled */ + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); + wmb(); + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000, + PCI_CR_BAR12MASK); + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000, + PCI_CR_BAR13MASK); + /*use 8 dw burst length */ + ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH); + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); + wmb(); + + /* setup irq line */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON); + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); + + /* toggle reset pin */ + if (reset_gpio) { + gpiod_set_value_cansleep(reset_gpio, 1); + wmb(); + mdelay(1); + gpiod_set_value_cansleep(reset_gpio, 0); + } + return 0; +} + +static int ltq_pci_probe(struct platform_device *pdev) +{ + pci_clear_flags(PCI_PROBE_ONLY); + + ltq_pci_membase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); + if (IS_ERR(ltq_pci_membase)) + return PTR_ERR(ltq_pci_membase); + + ltq_pci_mapped_cfg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); + if (IS_ERR(ltq_pci_mapped_cfg)) + return PTR_ERR(ltq_pci_mapped_cfg); + + ltq_pci_startup(pdev); + + pci_load_of_ranges(&pci_controller, pdev->dev.of_node); + register_pci_controller(&pci_controller); + return 0; +} + +static const struct of_device_id ltq_pci_match[] = { + { .compatible = "lantiq,pci-xway" }, + {}, +}; + +static struct platform_driver ltq_pci_driver = { + .probe = ltq_pci_probe, + .driver = { + .name = "pci-xway", + .of_match_table = ltq_pci_match, + }, +}; + +int __init pcibios_init(void) +{ + int ret = platform_driver_register(<q_pci_driver); + if (ret) + pr_info("pci-xway: Error registering platform driver!"); + return ret; +} + +arch_initcall(pcibios_init); |