diff options
Diffstat (limited to 'arch/mips/pci')
| -rw-r--r-- | arch/mips/pci/ops-loongson2.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pci-alchemy.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pci-ar2315.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pci-ip27.c | 3 | ||||
| -rw-r--r-- | arch/mips/pci/pci-lantiq.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pci-octeon.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pci-xtalk-bridge.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pcie-octeon.c | 2 |
8 files changed, 10 insertions, 7 deletions
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c index 0d1b36ba1c..068113f5c4 100644 --- a/arch/mips/pci/ops-loongson2.c +++ b/arch/mips/pci/ops-loongson2.c @@ -49,7 +49,7 @@ static int loongson_pcibios_config_access(unsigned char access_type, */ #ifdef CONFIG_CS5536 /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to - * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO, + * access the registers PCI_MSR_ADDR, PCI_MSR_DATA_LO, * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it * will not go this branch, but the others. so, no calling dead * loop here. diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index 1c722dd0c1..58625d1b64 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -453,7 +453,7 @@ static int alchemy_pci_probe(struct platform_device *pdev) /* we can't ioremap the entire pci config space because it's too large, * nor can we dynamically ioremap it because some drivers use the - * PCI config routines from within atomic contex and that becomes a + * PCI config routines from within atomic context and that becomes a * problem in get_vm_area(). Instead we use one wired TLB entry to * handle all config accesses for all busses. */ diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c index e17d862cfa..a925842ee1 100644 --- a/arch/mips/pci/pci-ar2315.c +++ b/arch/mips/pci/pci-ar2315.c @@ -16,7 +16,7 @@ * the CFG_SEL bit in the PCI_MISC_CONFIG register. * * Devices on the bus can perform DMA requests via chip BAR1. PCI host - * controller BARs are programmend as if an external device is programmed. + * controller BARs are programmed as if an external device is programmed. * Which means that during configuration, IDSEL pin of the chip should be * asserted. * diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index d85cbf84e4..973faea61c 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -7,6 +7,9 @@ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ + +#include <linux/io.h> + #include <asm/sn/addrs.h> #include <asm/sn/types.h> #include <asm/sn/klconfig.h> diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 80f7293166..68a8cefed4 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -152,7 +152,7 @@ static int ltq_pci_startup(struct platform_device *pdev) temp_buffer &= ~0xf0000; /* enable internal arbiter */ temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); - /* enable internal PCI master reqest */ + /* enable internal PCI master request */ temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); /* enable EBU request */ diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c index d19d9d4563..36d12cea35 100644 --- a/arch/mips/pci/pci-octeon.c +++ b/arch/mips/pci/pci-octeon.c @@ -376,7 +376,7 @@ static void octeon_pci_initialize(void) ctl_status.s.timer = 1; cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64); - /* Deassert PCI reset and advertize PCX Host Mode Device Capability + /* Deassert PCI reset and advertise PCX Host Mode Device Capability (64b) */ cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); cvmx_read_csr(CVMX_CIU_SOFT_PRST); diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c index 68d5211afe..45ddbaa6c1 100644 --- a/arch/mips/pci/pci-xtalk-bridge.c +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -114,7 +114,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, * * The function is complicated by the ultimate brokenness of the IOC3 chip * which is used in SGI systems. The IOC3 can only handle 32-bit PCI - * accesses and does only decode parts of it's address space. + * accesses and does only decode parts of its address space. */ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c index c9edd3fb38..2583e318e8 100644 --- a/arch/mips/pci/pcie-octeon.c +++ b/arch/mips/pci/pcie-octeon.c @@ -1037,7 +1037,7 @@ retry: in_fif_p_count = dbg_data.s.data & 0xff; } while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff)); - /* Update in_fif_p_count for it's offset with respect to out_p_count */ + /* Update in_fif_p_count for its offset with respect to out_p_count */ in_fif_p_count = (in_fif_p_count + in_p_offset) & 0xff; /* Read the OUT_P_COUNT from the debug select */ |