diff options
Diffstat (limited to 'arch/mips/sgi-ip27/ip27-hubio.c')
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-hubio.c | 185 |
1 files changed, 0 insertions, 185 deletions
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c deleted file mode 100644 index 8352eb6403..0000000000 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ /dev/null @@ -1,185 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc. - * Copyright (C) 2004 Christoph Hellwig. - * - * Support functions for the HUB ASIC - mostly PIO mapping related. - */ - -#include <linux/bitops.h> -#include <linux/string.h> -#include <linux/mmzone.h> -#include <asm/sn/addrs.h> -#include <asm/sn/arch.h> -#include <asm/sn/agent.h> -#include <asm/sn/io.h> -#include <asm/xtalk/xtalk.h> - - -static int force_fire_and_forget = 1; - -/** - * hub_pio_map - establish a HUB PIO mapping - * - * @hub: hub to perform PIO mapping on - * @widget: widget ID to perform PIO mapping for - * @xtalk_addr: xtalk_address that needs to be mapped - * @size: size of the PIO mapping - * - **/ -unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget, - unsigned long xtalk_addr, size_t size) -{ - unsigned i; - - /* use small-window mapping if possible */ - if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE) - return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE); - - if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) { - printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx" - " too big (%ld)\n", - nasid, widget, xtalk_addr, size); - return 0; - } - - xtalk_addr &= ~(BWIN_SIZE-1); - for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) { - if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used)) - continue; - - /* - * The code below does a PIO write to setup an ITTE entry. - * - * We need to prevent other CPUs from seeing our updated - * memory shadow of the ITTE (in the piomap) until the ITTE - * entry is actually set up; otherwise, another CPU might - * attempt a PIO prematurely. - * - * Also, the only way we can know that an entry has been - * received by the hub and can be used by future PIO reads/ - * writes is by reading back the ITTE entry after writing it. - * - * For these two reasons, we PIO read back the ITTE entry - * after we write it. - */ - IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr); - __raw_readq(IIO_ITTE_GET(nasid, i)); - - return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE); - } - - printk(KERN_WARNING "unable to establish PIO mapping for at" - " hub %d widget %d addr 0x%lx\n", - nasid, widget, xtalk_addr); - return 0; -} - - -/* - * hub_setup_prb(nasid, prbnum, credits, conveyor) - * - * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise, - * put it into conveyor belt mode with the specified number of credits. - */ -static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) -{ - union iprb_u prb; - int prb_offset; - - /* - * Get the current register value. - */ - prb_offset = IIO_IOPRB(prbnum); - prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset); - - /* - * Clear out some fields. - */ - prb.iprb_ovflow = 1; - prb.iprb_bnakctr = 0; - prb.iprb_anakctr = 0; - - /* - * Enable or disable fire-and-forget mode. - */ - prb.iprb_ff = force_fire_and_forget ? 1 : 0; - - /* - * Set the appropriate number of PIO credits for the widget. - */ - prb.iprb_xtalkctr = credits; - - /* - * Store the new value to the register. - */ - REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval); -} - -/** - * hub_set_piomode - set pio mode for a given hub - * - * @nasid: physical node ID for the hub in question - * - * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode. - * To do this, we have to make absolutely sure that no PIOs are in progress - * so we turn off access to all widgets for the duration of the function. - * - * XXX - This code should really check what kind of widget we're talking - * to. Bridges can only handle three requests, but XG will do more. - * How many can crossbow handle to widget 0? We're assuming 1. - * - * XXX - There is a bug in the crossbow that link reset PIOs do not - * return write responses. The easiest solution to this problem is to - * leave widget 0 (xbow) in fire-and-forget mode at all times. This - * only affects pio's to xbow registers, which should be rare. - **/ -static void hub_set_piomode(nasid_t nasid) -{ - u64 ii_iowa; - union hubii_wcr_u ii_wcr; - unsigned i; - - ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS); - REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0); - - ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR); - - if (ii_wcr.iwcr_dir_con) { - /* - * Assume a bridge here. - */ - hub_setup_prb(nasid, 0, 3); - } else { - /* - * Assume a crossbow here. - */ - hub_setup_prb(nasid, 0, 1); - } - - /* - * XXX - Here's where we should take the widget type into - * when account assigning credits. - */ - for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++) - hub_setup_prb(nasid, i, 3); - - REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa); -} - -/* - * hub_pio_init - PIO-related hub initialization - * - * @hub: hubinfo structure for our hub - */ -void hub_pio_init(nasid_t nasid) -{ - unsigned i; - - /* initialize big window piomaps for this hub */ - bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW); - for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) - IIO_ITTE_DISABLE(nasid, i); - - hub_set_piomode(nasid); -} |