diff options
Diffstat (limited to 'arch/mips/sibyte/sb1250/setup.c')
| -rw-r--r-- | arch/mips/sibyte/sb1250/setup.c | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c new file mode 100644 index 0000000000..644b190388 --- /dev/null +++ b/arch/mips/sibyte/sb1250/setup.c @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + */ +#include <linux/export.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> +#include <asm/cpu.h> +#include <asm/mipsregs.h> +#include <asm/io.h> +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_scd.h> + +unsigned int sb1_pass; +unsigned int soc_pass; +unsigned int soc_type; +EXPORT_SYMBOL(soc_type); +unsigned int periph_rev; +EXPORT_SYMBOL_GPL(periph_rev); +unsigned int zbbus_mhz; +EXPORT_SYMBOL(zbbus_mhz); + +static char *soc_str; +static char *pass_str; +static unsigned int war_pass; /* XXXKW don't overload PASS defines? */ + +static int __init setup_bcm1250(void) +{ + int ret = 0; + + switch (soc_pass) { + case K_SYS_REVISION_BCM1250_PASS1: + periph_rev = 1; + pass_str = "Pass 1"; + break; + case K_SYS_REVISION_BCM1250_A10: + periph_rev = 2; + pass_str = "A8/A10"; + /* XXXKW different war_pass? */ + war_pass = K_SYS_REVISION_BCM1250_PASS2; + break; + case K_SYS_REVISION_BCM1250_PASS2_2: + periph_rev = 2; + pass_str = "B1"; + break; + case K_SYS_REVISION_BCM1250_B2: + periph_rev = 2; + pass_str = "B2"; + war_pass = K_SYS_REVISION_BCM1250_PASS2_2; + break; + case K_SYS_REVISION_BCM1250_PASS3: + periph_rev = 3; + pass_str = "C0"; + break; + case K_SYS_REVISION_BCM1250_C1: + periph_rev = 3; + pass_str = "C1"; + break; + default: + if (soc_pass < K_SYS_REVISION_BCM1250_PASS2_2) { + periph_rev = 2; + pass_str = "A0-A6"; + war_pass = K_SYS_REVISION_BCM1250_PASS2; + } else { + printk("Unknown BCM1250 rev %x\n", soc_pass); + ret = 1; + } + break; + } + + return ret; +} + +int sb1250_m3_workaround_needed(void) +{ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + case K_SYS_SOC_TYPE_BCM1125: + case K_SYS_SOC_TYPE_BCM1125H: + return soc_pass < K_SYS_REVISION_BCM1250_C0; + + default: + return 0; + } +} + +static int __init setup_bcm112x(void) +{ + int ret = 0; + + switch (soc_pass) { + case 0: + /* Early build didn't have revid set */ + periph_rev = 3; + pass_str = "A1"; + war_pass = K_SYS_REVISION_BCM112x_A1; + break; + case K_SYS_REVISION_BCM112x_A1: + periph_rev = 3; + pass_str = "A1"; + break; + case K_SYS_REVISION_BCM112x_A2: + periph_rev = 3; + pass_str = "A2"; + break; + case K_SYS_REVISION_BCM112x_A3: + periph_rev = 3; + pass_str = "A3"; + break; + case K_SYS_REVISION_BCM112x_A4: + periph_rev = 3; + pass_str = "A4"; + break; + case K_SYS_REVISION_BCM112x_B0: + periph_rev = 3; + pass_str = "B0"; + break; + default: + printk("Unknown %s rev %x\n", soc_str, soc_pass); + ret = 1; + } + + return ret; +} + +/* Setup code likely to be common to all SiByte platforms */ + +static int __init sys_rev_decode(void) +{ + int ret = 0; + + war_pass = soc_pass; + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + soc_str = "BCM1250"; + ret = setup_bcm1250(); + break; + case K_SYS_SOC_TYPE_BCM1120: + soc_str = "BCM1120"; + ret = setup_bcm112x(); + break; + case K_SYS_SOC_TYPE_BCM1125: + soc_str = "BCM1125"; + ret = setup_bcm112x(); + break; + case K_SYS_SOC_TYPE_BCM1125H: + soc_str = "BCM1125H"; + ret = setup_bcm112x(); + break; + default: + printk("Unknown SOC type %x\n", soc_type); + ret = 1; + break; + } + + return ret; +} + +void __init sb1250_setup(void) +{ + uint64_t sys_rev; + int plldiv; + int bad_config = 0; + + sb1_pass = read_c0_prid() & PRID_REV_MASK; + sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); + soc_type = SYS_SOC_TYPE(sys_rev); + soc_pass = G_SYS_REVISION(sys_rev); + + if (sys_rev_decode()) { + printk("Restart after failure to identify SiByte chip\n"); + machine_restart(NULL); + } + + plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); + zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25); + + printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n", + soc_str, pass_str, zbbus_mhz * 2, sb1_pass); + printk("Board type: %s\n", get_system_type()); + + switch (war_pass) { + case K_SYS_REVISION_BCM1250_PASS1: + printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, " + "and the kernel doesn't have the proper " + "workarounds compiled in. @@@@\n"); + bad_config = 1; + break; + case K_SYS_REVISION_BCM1250_PASS2: + /* Pass 2 - easiest as default for now - so many numbers */ +#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \ + !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) + printk("@@@@ This is a BCM1250 A3-A10 board, and the " + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); + bad_config = 1; +#endif +#ifdef CONFIG_CPU_HAS_PREFETCH + printk("@@@@ Prefetches may be enabled in this kernel, " + "but are buggy on this board. @@@@\n"); + bad_config = 1; +#endif + break; + case K_SYS_REVISION_BCM1250_PASS2_2: +#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS + printk("@@@@ This is a BCM1250 B1/B2. board, and the " + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); + bad_config = 1; +#endif +#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \ + !defined(CONFIG_CPU_HAS_PREFETCH) + printk("@@@@ This is a BCM1250 B1/B2, but the kernel is " + "conservatively configured for an 'A' stepping. " + "@@@@\n"); +#endif + break; + default: + break; + } + if (bad_config) { + printk("Invalid configuration for this chip.\n"); + machine_restart(NULL); + } +} |